Summary: Update for September 16, 2026: The original 1.0 version of this advisory was specific to the Cisco Adaptive Security Virtual Appliance (ASAv) and Cisco Secure Firewall Threat Defense Virtual (FTDv) models. However, it was later found that this vulnerability affects all Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software platforms. A vulnerability in the VPN and management web servers of the Cisco Secure Firewall ASA Software and Cisco Secure FTD Software platforms could allow an unauthenticated, remote attacker to cause an affected device to run out of system memory or buffer blocks, which in turn could cause SSL VPN connection processing to slow down and eventually cease altogether. This vulnerability is due to a lack of proper memory management for new incoming SSL/TLS connections. An attacker could exploit this vulnerability by sending a large number of new incoming SSL/TLS connections to the targeted device. A successful exploit could allow the attacker to deplete system memory or buffers, resulting in a denial of service (DoS) condition. The memory or buffers could be reclaimed slowly if the attack traffic is stopped, but a manual reload may be required to restore operations quickly. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. This advisory is part of the October 2024 release of the Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication. For a complete list of the advisories and links to them, see Cisco Event Response: October 2024 Semiannual Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication ["https://sec.cloudapps.cisco.com/security/center/viewErp.x?alertId=ERP-75300"].

---

Vulnerable Products: This vulnerability affects Cisco products if they are running a vulnerable release of Cisco Secure Firewall ASA Software or Secure FTD Software and have one or both of the following features configured: SSL VPN HTTP server used for the management interface For information about which Cisco software releases are vulnerable, see the Fixed Software ["#fs"] section of this advisory. Determine Whether a Device Could Process SSL or TLS Messages To determine whether a Cisco ASA or FTD device could process SSL or TLS packets, use the show asp table socket | include SSL|DTLS command and verify that it returns output. If this command returns empty output, the device is not affected. If this command returns any output, as shown in the following example, the device is affected: asa# show asp table socket | include SSL|DTLS SSL 0005aa68 LISTEN x.x.x.x:443 0.0.0.0:* SSL 002d9e38 LISTEN x.x.x.x:8443 0.0.0.0:* DTLS 0018f7a8 LISTEN 10.0.0.250:443 0.0.0.0:*

---

Products Confirmed Not Vulnerable: Only products listed in the Vulnerable Products ["#vp"] section of this advisory are known to be affected by this vulnerability. Cisco has confirmed that this vulnerability does not affect Secure Firewall Management Center (FMC) Software.

---

Indicators of Compromise: A device may have been exploited by this vulnerability if the show blocks command indicates a leak of memory blocks. The device may stop passing traffic, or performance could degrade due to this memory leak. In this example, the memory blocks of 80 bytes are leaked, resulting in zero (0) blocks being available: # show blocks SIZE MAX LOW CNT 0 1450 1448 1450 4 100 99 99 80 1000 0 0 256 4148 3898 4040 1550 6279 6184 6258 2048 600 598 600 2560 164 164 164 4096 100 100 100 8192 100 100 100 9344 60000 58237 59837 16384 102 102 102 65536 16 16 16 For more help to determine whether the device has been impacted by exploitation of this vulnerability, contact the Cisco Technical Assistance Center (TAC).

---

Workarounds: There are no workarounds that address this vulnerability.

---

Fixed Software: Cisco considers any workarounds and mitigations (if applicable) to be temporary solutions until an upgrade to a fixed software release is available. To remediate this vulnerability and avoid future exposure as described in this advisory, Cisco strongly recommends that customers upgrade to the fixed software indicated in this advisory. Cisco Secure Firewall ASA, Secure FMC, and Secure FTD Software To help customers determine their exposure to vulnerabilities in Cisco Secure Firewall ASA, Secure FMC, and Secure FTD Software, Cisco provides the Cisco Software Checker ["https://sec.cloudapps.cisco.com/security/center/softwarechecker.x"]. This tool identifies any Cisco security advisories that impact a specific software release and the earliest release that fixes the vulnerabilities that are described in each advisory (“First Fixed”). If applicable, the tool also returns the earliest release that fixes all the vulnerabilities that are described in all the advisories that the Software Checker identifies (“Combined First Fixed”). To use the tool, go to the Cisco Software Checker ["https://sec.cloudapps.cisco.com/security/center/softwarechecker.x"] page and follow the instructions. Alternatively, use the following form to search for vulnerabilities that affect a specific software release. To use the form, follow these steps: Choose which advisories the tool will search—all advisories, only advisories with a Critical or High Security Impact Rating (SIR) ["https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#asr"], or only this advisory. Choose the appropriate software. Choose the appropriate platform. Enter a release number—for example, 9.20.3.4 for Cisco Secure Firewall ASA Software or 7.4.2 for Cisco Secure FTD Software. Click Check. Only this advisory All Critical and High advisories All advisories Cisco ASA Software Cisco FMC Software Cisco FTD Software Any Platform 3000 Series Industrial Security Appliances (ISA) ASA 5500-X Series Firewalls ASA Service Module Adaptive Security Virtual Appliance (ASAv) Firepower 1000 Series Firepower 2100 Series Firepower 4100 Series Firepower 9000 Series Firepower NGFW Virtual Secure Firewall 1200 Series Secure Firewall 3100 Series Secure Firewall 4200 Series Firepower Management Center Appliances Note: For Cisco 3000 Series Industrial Security Appliances (ISAs) that are running Cisco Secure Firewall ASA Software, Cisco Secure Firewall ASA Software Release 9.16.4.67 has been deferred and replaced by Release 9.16.4.70. Additional Resources For help determining the best Cisco Secure Firewall ASA, Secure FMC, or Secure FTD Software release, see the following Recommended Releases documents. If a security advisory recommends a later release, Cisco recommends following the advisory guidance. Cisco Secure Firewall ASA Compatibility ["https://www.cisco.com/c/en/us/td/docs/security/asa/compatibility/asamatrx.html"] Cisco Secure Firewall ASA Upgrade Guide ["https://www.cisco.com/c/en/us/td/docs/security/asa/upgrade/asa-upgrade/planning.html"] Cisco Secure Firewall Threat Defense Compatibility Guide ["https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/compatibility/threat-defense-compatibility.html"]

---

Vulnerability Policy: To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy ["http://www.cisco.com/web/about/security/psirt/security_vulnerability_policy.html"]. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco. For additional information on Cisco's vulnerability management, disclosure cadence, and software patching strategy, see Cisco's Transition to a Risk-Based Vulnerability Disclosure Model ["https://sec.cloudapps.cisco.com/security/center/resources/risk-based-disclosure"].

---

Exploitation and Public Announcements: The Cisco Product Security Incident Response Team (PSIRT) is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory.

---

Source: This vulnerability was found by Vivek Singh of Cisco during internal security testing.

---

Legal Disclaimer: THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME. A standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products.