cisco-sa-lsplus-z6aqeojk
Vulnerability from csaf_cisco
Published
2022-04-13 16:00
Modified
2022-04-28 21:28
Summary
Cisco IOS XR Software for ASR 9000 Series Routers Lightspeed-Plus Line Cards Denial of Service Vulnerability

Notes

Summary
A vulnerability in the data plane microcode of Lightspeed-Plus line cards for Cisco ASR 9000 Series Aggregation Services Routers, ASR 9902 Compact High-Performance Routers, and ASR 9903 Compact High-Performance Routers could allow an unauthenticated, remote attacker to cause the line card to reset. This vulnerability is due to the incorrect handling of malformed packets that are received on the Lightspeed-Plus line cards. An attacker could exploit this vulnerability by sending a crafted IPv4 or IPv6 packet through an affected device. A successful exploit could allow the attacker to cause the Lightspeed-Plus line card to reset, resulting in a denial of service (DoS) condition for any traffic that traverses that line card. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. This advisory is available at the following link: https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-lsplus-Z6AQEOjk ["https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-lsplus-Z6AQEOjk"] This advisory is part of the April 2022 release of the Cisco IOS XR Software Security Advisory Bundled Publication. For a complete list of the advisories and links to them, see Cisco Event Response: April 2022 Cisco IOS XR Software Security Advisory Bundled Publication ["https://sec.cloudapps.cisco.com/security/center/viewErp.x?alertId=ERP-74835"].
Vulnerable Products
This vulnerability affects Cisco ASR 9000 Series Aggregation Services Routers if they are running a vulnerable release of Cisco IOS XR 64-bit Software and have a Lightspeed-Plus-based line card installed. This vulnerability also affects the following Cisco products if they are running a vulnerable release of Cisco IOS XR 64-bit Software: ASR 9902 Compact High-Performance Routers ASR 9903 Compact High-Performance Routers For information about which Cisco software releases are vulnerable, see the Fixed Software ["#fs"] section of this advisory. Determine Which Line Cards are Installed To determine which line cards are installed in the device, use the show platform CLI command. The following line cards are Lightspeed-Plus-based: A9K-4HG-FLEX-SE A9K-4HG-FLEX-TR A9K-8HG-FLEX-SE A9K-8HG-FLEX-TR A9K-20HG-FLEX-SE A9K-20HG-FLEX-TR A99-4HG-FLEX-SE A99-4HG-FLEX-TR A99-10X400GE-X-SE A99-10X400GE-X-TR A99-32X100GE-X-SE A99-32X100GE-X-TR For more information about line card type identification, see ASR 9000 Series Line Card Types ["https://www.cisco.com/c/en/us/support/docs/routers/asr-9000-series-aggregation-services-routers/116726-qanda-product-00.html"]. Note: The Cisco Lightspeed-Plus list of product identifiers was accurate at the time of publication. For specific questions and further clarification about a product identifier, contact the Cisco Technical Assistance Center (TAC).
Products Confirmed Not Vulnerable
Only products listed in the Vulnerable Products ["#vp"] section of this advisory are known to be affected by this vulnerability. Cisco has confirmed that this vulnerability does not affect the following Cisco products: IOS Software IOS XE Software IOS XR Platforms not listed in the Vulnerable Products ["#vp"] section of this advisory NX-OS Software
Details
When this vulnerability is successfully exploited, logs will show a warning message similar to the following: npu_server[351]: %PLATFORM-NP-4-HARD_RESET_START : NP0: Performing recovery action for an internal network processor error. (PA2REG.ppe_int1)
Workarounds
There are no workarounds that address this vulnerability.
Fixed Software
Cisco has released free software updates ["https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#ssu"] that address the vulnerability described in this advisory. Customers with service contracts that entitle them to regular software updates should obtain security fixes through their usual update channels. Customers may only install and expect support for software versions and feature sets for which they have purchased a license. By installing, downloading, accessing, or otherwise using such software upgrades, customers agree to follow the terms of the Cisco software license: https://www.cisco.com/c/en/us/products/end-user-license-agreement.html ["https://www.cisco.com/c/en/us/products/end-user-license-agreement.html"] Additionally, customers may only download software for which they have a valid license, procured from Cisco directly, or through a Cisco authorized reseller or partner. In most cases this will be a maintenance upgrade to software that was previously purchased. Free security software updates do not entitle customers to a new software license, additional software feature sets, or major revision upgrades. The Cisco Support and Downloads page ["https://www.cisco.com/c/en/us/support/index.html"] on Cisco.com provides information about licensing and downloads. This page can also display customer device support coverage for customers who use the My Devices tool. When considering software upgrades ["https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#fixes"], customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories page ["https://www.cisco.com/go/psirt"], to determine exposure and a complete upgrade solution. In all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers. Customers Without Service Contracts Customers who purchase directly from Cisco but do not hold a Cisco service contract and customers who make purchases through third-party vendors but are unsuccessful in obtaining fixed software through their point of sale should obtain upgrades by contacting the Cisco TAC: https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html ["https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html"] Customers should have the product serial number available and be prepared to provide the URL of this advisory as evidence of entitlement to a free upgrade. Fixed Releases In the following table(s), the left column lists Cisco software releases. The right column indicates whether a release is affected by the vulnerability described in this advisory and the first release that includes the fix for this vulnerability. Customers are advised to upgrade to an appropriate fixed software release ["https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#fixes"] as indicated in this section. Cisco IOS XR Software Release First Fixed Release 7.0 and earlier Not vulnerable. 7.1 Vulnerable; migrate to a fixed release or apply an SMU or Service Pack. 7.2 Not vulnerable; no ASR9K support. 7.3 7.3.2 7.4 and later Not affected. Cisco has released the following SMUs to address this vulnerability. Customers who require SMUs for releases that are not listed are advised to contact their support organization. Cisco IOS XR Software Release Platform SMU Name 7.1.2 ASR9K-X64 asr9k-x64-7.1.2.CSCvy48962 7.1.3 ASR9K-X64 asr9k-x64-7.1.3.CSCvz75757 Cisco has released the following Service Packs that include the SMU to address this vulnerability. Cisco IOS XR Software Release Platform Service Pack Name 7.1.2 ASR9K-X64 asr9k-px-7.1.2.k9-sp1.tar The Cisco Product Security Incident Response Team (PSIRT) validates only the affected and fixed release information that is documented in this advisory.
Vulnerability Policy
To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy ["https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html"]. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.
Exploitation and Public Announcements
The Cisco PSIRT is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory.
Source
This vulnerability was found during the resolution of a Cisco TAC support case.
Legal Disclaimer
THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME. A standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products.



{
  "document": {
    "acknowledgments": [
      {
        "summary": "This vulnerability was found during the resolution of a Cisco TAC support case."
      }
    ],
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "notes": [
      {
        "category": "summary",
        "text": "A vulnerability in the data plane microcode of Lightspeed-Plus line cards for Cisco ASR 9000 Series Aggregation Services Routers, ASR 9902 Compact High-Performance Routers, and ASR 9903 Compact High-Performance Routers could allow an unauthenticated, remote attacker to cause the line card to reset.\r\n\r\nThis vulnerability is due to the incorrect handling of malformed packets that are received on the Lightspeed-Plus line cards. An attacker could exploit this vulnerability by sending a crafted IPv4 or IPv6 packet through an affected device. A successful exploit could allow the attacker to cause the Lightspeed-Plus line card to reset, resulting in a denial of service (DoS) condition for any traffic that traverses that line card.\r\n\r\nCisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.\r\n\r\nThis advisory is available at the following link:\r\nhttps://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-lsplus-Z6AQEOjk [\"https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-lsplus-Z6AQEOjk\"]\r\n\r\nThis advisory is part of the April 2022 release of the Cisco IOS XR Software Security Advisory Bundled Publication. For a complete list of the advisories and links to them, see Cisco Event Response: April 2022 Cisco IOS XR Software Security Advisory Bundled Publication [\"https://sec.cloudapps.cisco.com/security/center/viewErp.x?alertId=ERP-74835\"].",
        "title": "Summary"
      },
      {
        "category": "general",
        "text": "This vulnerability affects Cisco ASR 9000 Series Aggregation Services Routers if they are running a vulnerable release of Cisco IOS XR 64-bit Software and have a Lightspeed-Plus-based line card installed.\r\n\r\nThis vulnerability also affects the following Cisco products if they are running a vulnerable release of Cisco IOS XR 64-bit Software:\r\n\r\nASR 9902 Compact High-Performance Routers\r\nASR 9903 Compact High-Performance Routers\r\n\r\nFor information about which Cisco software releases are vulnerable, see the Fixed Software [\"#fs\"] section of this advisory.\r\n  Determine Which Line Cards are Installed\r\nTo determine which line cards are installed in the device, use the show platform CLI command.\r\n\r\nThe following line cards are Lightspeed-Plus-based:\r\n\r\nA9K-4HG-FLEX-SE\r\nA9K-4HG-FLEX-TR\r\nA9K-8HG-FLEX-SE\r\nA9K-8HG-FLEX-TR\r\nA9K-20HG-FLEX-SE\r\nA9K-20HG-FLEX-TR\r\nA99-4HG-FLEX-SE\r\nA99-4HG-FLEX-TR\r\nA99-10X400GE-X-SE\r\nA99-10X400GE-X-TR\r\nA99-32X100GE-X-SE\r\nA99-32X100GE-X-TR\r\n\r\nFor more information about line card type identification, see ASR 9000 Series Line Card Types [\"https://www.cisco.com/c/en/us/support/docs/routers/asr-9000-series-aggregation-services-routers/116726-qanda-product-00.html\"].\r\n\r\nNote: The Cisco Lightspeed-Plus list of product identifiers was accurate at the time of publication. For specific questions and further clarification about a product identifier, contact the Cisco Technical Assistance Center (TAC).",
        "title": "Vulnerable Products"
      },
      {
        "category": "general",
        "text": "Only products listed in the Vulnerable Products [\"#vp\"] section of this advisory are known to be affected by this vulnerability.\r\n\r\nCisco has confirmed that this vulnerability does not affect the following Cisco products:\r\n\r\nIOS Software\r\nIOS XE Software\r\nIOS XR Platforms not listed in the Vulnerable Products [\"#vp\"] section of this advisory\r\nNX-OS Software",
        "title": "Products Confirmed Not Vulnerable"
      },
      {
        "category": "general",
        "text": "When this vulnerability is successfully exploited, logs will show a warning message similar to the following:\r\n\r\n\r\nnpu_server[351]: %PLATFORM-NP-4-HARD_RESET_START : NP0: Performing recovery action for an internal network processor error. (PA2REG.ppe_int1)",
        "title": "Details"
      },
      {
        "category": "general",
        "text": "There are no workarounds that address this vulnerability.",
        "title": "Workarounds"
      },
      {
        "category": "general",
        "text": "Cisco has released free software updates [\"https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#ssu\"] that address the vulnerability described in this advisory. Customers with service contracts that entitle them to regular software updates should obtain security fixes through their usual update channels.\r\n\r\nCustomers may only install and expect support for software versions and feature sets for which they have purchased a license. By installing, downloading, accessing, or otherwise using such software upgrades, customers agree to follow the terms of the Cisco software license:\r\nhttps://www.cisco.com/c/en/us/products/end-user-license-agreement.html [\"https://www.cisco.com/c/en/us/products/end-user-license-agreement.html\"]\r\n\r\nAdditionally, customers may only download software for which they have a valid license, procured from Cisco directly, or through a Cisco authorized reseller or partner. In most cases this will be a maintenance upgrade to software that was previously purchased. Free security software updates do not entitle customers to a new software license, additional software feature sets, or major revision upgrades.\r\n\r\nThe Cisco Support and Downloads page [\"https://www.cisco.com/c/en/us/support/index.html\"] on Cisco.com provides information about licensing and downloads. This page can also display customer device support coverage for customers who use the My Devices tool.\r\n\r\nWhen considering software upgrades [\"https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#fixes\"], customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories page [\"https://www.cisco.com/go/psirt\"], to determine exposure and a complete upgrade solution.\r\n\r\nIn all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.\r\n  Customers Without Service Contracts\r\nCustomers who purchase directly from Cisco but do not hold a Cisco service contract and customers who make purchases through third-party vendors but are unsuccessful in obtaining fixed software through their point of sale should obtain upgrades by contacting the Cisco TAC: https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html [\"https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html\"]\r\n\r\nCustomers should have the product serial number available and be prepared to provide the URL of this advisory as evidence of entitlement to a free upgrade.\r\n      Fixed Releases\r\nIn the following table(s), the left column lists Cisco software releases. The right column indicates whether a release is affected by the vulnerability described in this advisory and the first release that includes the fix for this vulnerability. Customers are advised to upgrade to an appropriate fixed software release [\"https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#fixes\"] as indicated in this section.\r\n           Cisco IOS XR Software Release  First Fixed Release          7.0 and earlier  Not vulnerable.      7.1  Vulnerable; migrate to a fixed release or apply an SMU or Service Pack.      7.2  Not vulnerable; no ASR9K support.      7.3  7.3.2      7.4 and later  Not affected.\r\nCisco has released the following SMUs to address this vulnerability. Customers who require SMUs for releases that are not listed are advised to contact their support organization.\r\n           Cisco IOS XR Software Release  Platform  SMU Name          7.1.2  ASR9K-X64  asr9k-x64-7.1.2.CSCvy48962      7.1.3  ASR9K-X64  asr9k-x64-7.1.3.CSCvz75757\r\nCisco has released the following Service Packs that include the SMU to address this vulnerability.\r\n           Cisco IOS XR Software Release  Platform  Service Pack Name          7.1.2  ASR9K-X64  asr9k-px-7.1.2.k9-sp1.tar\r\nThe Cisco Product Security Incident Response Team (PSIRT) validates only the affected and fixed release information that is documented in this advisory.",
        "title": "Fixed Software"
      },
      {
        "category": "general",
        "text": "To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy [\"https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html\"]. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.",
        "title": "Vulnerability Policy"
      },
      {
        "category": "general",
        "text": "The Cisco PSIRT is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory.",
        "title": "Exploitation and Public Announcements"
      },
      {
        "category": "general",
        "text": "This vulnerability was found during the resolution of a Cisco TAC support case.",
        "title": "Source"
      },
      {
        "category": "legal_disclaimer",
        "text": "THIS DOCUMENT IS PROVIDED ON AN \"AS IS\" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.\r\n\r\nA standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products.",
        "title": "Legal Disclaimer"
      }
    ],
    "publisher": {
      "category": "vendor",
      "contact_details": "Emergency Support:\r\n+1 877 228 7302 (toll-free within North America)\r\n+1 408 525 6532 (International direct-dial)\r\nNon-emergency Support:\r\nEmail: psirt@cisco.com\r\nSupport requests that are received via e-mail are typically acknowledged within 48 hours.",
      "issuing_authority": "Cisco product security incident response is the responsibility of the Cisco Product Security Incident Response Team (PSIRT). The Cisco PSIRT is a dedicated, global team that manages the receipt, investigation, and public reporting of security vulnerability information that is related to Cisco products and networks. The on-call Cisco PSIRT works 24x7 with Cisco customers, independent security researchers, consultants, industry organizations, and other vendors to identify possible security issues with Cisco products and networks.\r\nMore information can be found in Cisco Security Vulnerability Policy available at https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html",
      "name": "Cisco",
      "namespace": "https://wwww.cisco.com"
    },
    "references": [
      {
        "category": "self",
        "summary": "Cisco IOS XR Software for ASR 9000 Series Routers Lightspeed-Plus Line Cards Denial of Service Vulnerability",
        "url": "https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-lsplus-Z6AQEOjk"
      },
      {
        "category": "external",
        "summary": "Cisco Event Response: April 2022 Cisco IOS XR Software Security Advisory Bundled Publication",
        "url": "https://sec.cloudapps.cisco.com/security/center/viewErp.x?alertId=ERP-74835"
      },
      {
        "category": "external",
        "summary": "Cisco Security Vulnerability Policy",
        "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html"
      },
      {
        "category": "external",
        "summary": "https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-lsplus-Z6AQEOjk",
        "url": "https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-lsplus-Z6AQEOjk"
      },
      {
        "category": "external",
        "summary": "Cisco\u0026nbsp;Event Response: April 2022 Cisco\u0026nbsp;IOS XR Software Security Advisory Bundled Publication",
        "url": "https://sec.cloudapps.cisco.com/security/center/viewErp.x?alertId=ERP-74835"
      },
      {
        "category": "external",
        "summary": "ASR 9000 Series Line Card Types",
        "url": "https://www.cisco.com/c/en/us/support/docs/routers/asr-9000-series-aggregation-services-routers/116726-qanda-product-00.html"
      },
      {
        "category": "external",
        "summary": "free software updates",
        "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#ssu"
      },
      {
        "category": "external",
        "summary": "https://www.cisco.com/c/en/us/products/end-user-license-agreement.html",
        "url": "https://www.cisco.com/c/en/us/products/end-user-license-agreement.html"
      },
      {
        "category": "external",
        "summary": "Cisco\u0026nbsp;Support and Downloads page",
        "url": "https://www.cisco.com/c/en/us/support/index.html"
      },
      {
        "category": "external",
        "summary": "considering software upgrades",
        "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#fixes"
      },
      {
        "category": "external",
        "summary": "Cisco\u0026nbsp;Security Advisories page",
        "url": "https://www.cisco.com/go/psirt"
      },
      {
        "category": "external",
        "summary": "https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html",
        "url": "https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html"
      },
      {
        "category": "external",
        "summary": "fixed software release",
        "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#fixes"
      },
      {
        "category": "external",
        "summary": "Security Vulnerability Policy",
        "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html"
      }
    ],
    "title": "Cisco IOS XR Software for ASR 9000 Series Routers Lightspeed-Plus Line Cards Denial of Service Vulnerability",
    "tracking": {
      "current_release_date": "2022-04-28T21:28:53+00:00",
      "generator": {
        "date": "2022-10-22T03:14:35+00:00",
        "engine": {
          "name": "TVCE"
        }
      },
      "id": "cisco-sa-lsplus-Z6AQEOjk",
      "initial_release_date": "2022-04-13T16:00:00+00:00",
      "revision_history": [
        {
          "date": "2022-04-13T15:41:29+00:00",
          "number": "1.0.0",
          "summary": "Initial public release."
        },
        {
          "date": "2022-04-28T21:28:53+00:00",
          "number": "1.1.0",
          "summary": "Added vulnerable products."
        }
      ],
      "status": "final",
      "version": "1.1.0"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "category": "product_family",
            "name": "Cisco IOS XR Software",
            "product": {
              "name": "Cisco IOS XR Software ",
              "product_id": "CSAFPID-5834"
            }
          }
        ],
        "category": "vendor",
        "name": "Cisco"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2022-20714",
      "ids": [
        {
          "system_name": "Cisco Bug ID",
          "text": "CSCvy48962"
        }
      ],
      "notes": [
        {
          "category": "other",
          "text": "Complete.",
          "title": "Affected Product Comprehensiveness"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-5834"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Cisco has released software updates that address this vulnerability.",
          "product_ids": [
            "CSAFPID-5834"
          ],
          "url": "https://software.cisco.com"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.6,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-5834"
          ]
        }
      ],
      "title": "Cisco IOS XR Software for ASR 9000 Series Routers Denial of Service Vulnerability"
    }
  ]
}


Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading...

Loading...

Loading...

Sightings

Author Source Type Date

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or seen somewhere by the user.
  • Confirmed: The vulnerability is confirmed from an analyst perspective.
  • Exploited: This vulnerability was exploited and seen by the user reporting the sighting.
  • Patched: This vulnerability was successfully patched by the user reporting the sighting.
  • Not exploited: This vulnerability was not exploited or seen by the user reporting the sighting.
  • Not confirmed: The user expresses doubt about the veracity of the vulnerability.
  • Not patched: This vulnerability was not successfully patched by the user reporting the sighting.