cisco-sa-n3n9k-priv-escal-3qhxjbc
Vulnerability from csaf_cisco
Published
2020-08-26 16:00
Modified
2020-08-26 20:59
Summary
Cisco Nexus 3000 and 9000 Series Switches Privilege Escalation Vulnerability
Notes
Summary
A vulnerability in the Enable Secret feature of Cisco Nexus 3000 Series Switches and Cisco Nexus 9000 Series Switches in standalone NX-OS mode could allow an authenticated, local attacker to issue the enable command and get full administrative privileges. To exploit this vulnerability, the attacker would need to have valid credentials for the affected device.
The vulnerability is due to a logic error in the implementation of the enable command. An attacker could exploit this vulnerability by logging in to the device and issuing the enable command. A successful exploit could allow the attacker to gain full administrative privileges without using the enable password.
Note: The Enable Secret feature is disabled by default.
Cisco has released software updates that address this vulnerability. There are workarounds that address this vulnerability.
This advisory is available at the following link:
https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-n3n9k-priv-escal-3QhXJBC ["https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-n3n9k-priv-escal-3QhXJBC"]
This advisory is part of the August 2020 Cisco FXOS and NX-OS Software Security Advisory Bundled Publication, which includes seven Cisco Security Advisories that describe seven vulnerabilities. For a complete list of the advisories and links to them, see Cisco Event Response: August 2020 Cisco FXOS and NX-OS Software Security Advisory Bundled Publication ["https://sec.cloudapps.cisco.com/security/center/viewErp.x?alertId=ERP-74239"].
Vulnerable Products
This vulnerability affects the following Cisco products if they are running a vulnerable release of Cisco NX-OS Software and have the feature privilege command and the enable secret command configured:
Nexus 3000 Series Switches
Nexus 9000 Series Switches in standalone NX-OS mode
For information about which Cisco software releases are vulnerable, see the Fixed Software ["#fs"] section of this advisory.
Products Confirmed Not Vulnerable
Only products listed in the Vulnerable Products ["#vp"] section of this advisory are known to be affected by this vulnerability.
Cisco has confirmed that this vulnerability does not affect the following Cisco products:
Firepower 1000 Series
Firepower 2100 Series
Firepower 4100 Series
Firepower 9300 Security Appliances
MDS 9000 Series Multilayer Switches
Nexus 1000 Virtual Edge for VMware vSphere
Nexus 1000V Switch for Microsoft Hyper-V
Nexus 1000V Switch for VMware vSphere
Nexus 5500 Platform Switches
Nexus 5600 Platform Switches
Nexus 6000 Series Switches
Nexus 7000 Series Switches
Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode
UCS 6200 Series Fabric Interconnects
UCS 6300 Series Fabric Interconnects
UCS 6400 Series Fabric Interconnects
Details
The enable secret command was added to Cisco NX-OS Software as a tool for migrating configurations from Cisco IOS Software to Cisco NX-OS Software only. The command serves no other purpose in Cisco NX-OS Software and should otherwise be disabled. The enable secret command will be removed in future releases.
The enable secret command is used in Cisco IOS Software to set a password that grants a user privileged administrative access to a Cisco IOS Software system. In Cisco NX-OS Software, there is no concept of an enable-secret or enable-password setting. Privileges are managed using role-based access control (RBAC). The functional equivalent to enabling mode access on a Cisco IOS Software device is assignment of an account to the network-admin (global privileged access) or vdc-admin (virtual device context [VDC]-specific privileged access) role in Cisco NX-OS Software.
For additional information, see the Cisco Guide to Securing NX-OS Software Devices ["https://sec.cloudapps.cisco.com/security/center/resources/securing_nx_os.html"].
Indicators of Compromise
To determine whether this vulnerability has been exploited, use the show accounting log | include "enable" command. The following example shows the output of this command after a low-privileged user has elevated their privilege by using the enable command:
nxos# show accounting log | include "enable"
type=update:id=console0:user=guest:cmd=enable (SUCCESS)
type=update:id=console0:user=guest:cmd=enable 15 (SUCCESS)
Workarounds
There is a workaround that addresses this vulnerability.
Cisco NX-OS Software uses RBAC to manage user accounts and privileges. For guidance, see the Configuring User Accounts and RBAC ["https://www.cisco.com/en/US/docs/switches/datacenter/sw/4_1/nx-os/security/configuration/guide/sec_rbac.html"] section of the Cisco NX-OS Security Configuration Guide.
Once RBAC is configured, remove the enable secret command from the configuration.
Fixed Software
Cisco has released free software updates that address the vulnerability described in this advisory. Customers may only install and expect support for software versions and feature sets for which they have purchased a license. By installing, downloading, accessing, or otherwise using such software upgrades, customers agree to follow the terms of the Cisco software license:
https://www.cisco.com/c/en/us/products/end-user-license-agreement.html ["https://www.cisco.com/c/en/us/products/end-user-license-agreement.html"]
Additionally, customers may only download software for which they have a valid license, procured from Cisco directly, or through a Cisco authorized reseller or partner. In most cases this will be a maintenance upgrade to software that was previously purchased. Free security software updates do not entitle customers to a new software license, additional software feature sets, or major revision upgrades.
When considering software upgrades ["https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#fixes"], customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories page ["https://www.cisco.com/go/psirt"], to determine exposure and a complete upgrade solution.
In all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.
Customers Without Service Contracts
Customers who purchase directly from Cisco but do not hold a Cisco service contract and customers who make purchases through third-party vendors but are unsuccessful in obtaining fixed software through their point of sale should obtain upgrades by contacting the Cisco TAC: https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html ["https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html"]
Customers should have the product serial number available and be prepared to provide the URL of this advisory as evidence of entitlement to a free upgrade.
Cisco NX-OS Software
To help customers determine their exposure to vulnerabilities in Cisco NX-OS Software, Cisco provides the Cisco Software Checker ["https://sec.cloudapps.cisco.com/security/center/softwarechecker.x"] to identify any Cisco Security Advisories that impact a specific Cisco NX-OS Software release and the earliest release that fixes the vulnerabilities that are described in each advisory (“First Fixed”). If applicable, the tool also returns the earliest release that fixes all the vulnerabilities described in all the advisories identified (“Combined First Fixed”).
Customers can use the Cisco Software Checker ["https://sec.cloudapps.cisco.com/security/center/softwarechecker.x"] to search advisories in the following ways:
Choose the software, platform, and one or more releases
Upload a .txt file that includes a list of specific releases
Enter the output of the show version command
After initiating a search, customers can customize the search to include all Cisco Security Advisories or one or more specific advisories.
Customers can also use the following form to determine whether a release is affected by any Cisco Security Advisory by choosing the Cisco NX-OS Software and platform and then entering a release—for example, 7.0(3)I7(5) for Cisco Nexus 3000 Series Switches or 14.0(1h) for Cisco NX-OS Software in ACI mode:
Cisco NX-OS Software Cisco NX-OS Software in ACI Mode MDS 9000 Series Multilayer Switches Nexus 1000V Series Switches Nexus 3000 Series Switches Nexus 5000 Series Switches Nexus 6000 Series Switches Nexus 7000 Series Switches Nexus 9000 Series Switches
By default, the Cisco Software Checker ["https://sec.cloudapps.cisco.com/security/center/softwarechecker.x"] includes results only for vulnerabilities that have a Critical or High Security Impact Rating (SIR). To include results for Medium SIR vulnerabilities, customers can use the Cisco Software Checker and check the Medium check box in the drop-down list under Impact Rating when customizing a search.
Additional Resources
For help determining the best Cisco NX-OS Software release for a Cisco Nexus Switch, see the following Recommended Releases documents. If a security advisory recommends a later release, Cisco recommends following the advisory guidance.
Cisco MDS Series Switches ["https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/b_MDS_NX-OS_Recommended_Releases.html"]
Cisco Nexus 1000V for VMware Switch ["http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus1000/sw/recommended_releases/b_Cisco_N1KV_VMware_MinRecommendedReleases.html"]
Cisco Nexus 3000 Series Switches ["http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus3000/sw/recommended_release/b_Minimum_and_Recommended_Cisco_NX-OS_Releases_for_Cisco_Nexus_3000_Series_Switches.html"]
Cisco Nexus 5500 Platform Switches ["http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5500/sw/release/recommended_releases/n5500_recommended_nx-os_releases.html"]
Cisco Nexus 5600 Platform Switches ["https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5600/sw/release/recommended_releases/n5600_recommended_nx-os_releases.html"]
Cisco Nexus 6000 Series Switches ["http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus6000/sw/release/recommended_releases/recommended_nx-os_releases.html"]
Cisco Nexus 7000 Series Switches ["http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-os/recommended_releases/recommended_nx-os_releases.html"]
Cisco Nexus 9000 Series Switches ["http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/recommended_release/b_Minimum_and_Recommended_Cisco_NX-OS_Releases_for_Cisco_Nexus_9000_Series_Switches.html"]
Cisco Nexus 9000 Series ACI-Mode Switches ["https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/recommended-release/b_Recommended_Cisco_ACI_Releases.html"]
To determine the best release for Cisco UCS Software, see the Recommended Releases documents in the release notes for the device.
Vulnerability Policy
To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy ["https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html"]. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.
Exploitation and Public Announcements
The Cisco Product Security Incident Response Team (PSIRT) is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory.
Source
This vulnerability was found during the resolution of a Cisco TAC support case.
Legal Disclaimer
THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.
A standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products.
{ "document": { "acknowledgments": [ { "summary": "This vulnerability was found during the resolution of a Cisco TAC support case." } ], "category": "csaf_security_advisory", "csaf_version": "2.0", "notes": [ { "category": "summary", "text": "A vulnerability in the Enable Secret feature of Cisco Nexus 3000 Series Switches and Cisco Nexus 9000 Series Switches in standalone NX-OS mode could allow an authenticated, local attacker to issue the enable command and get full administrative privileges. To exploit this vulnerability, the attacker would need to have valid credentials for the affected device.\r\n\r\nThe vulnerability is due to a logic error in the implementation of the enable command. An attacker could exploit this vulnerability by logging in to the device and issuing the enable command. A successful exploit could allow the attacker to gain full administrative privileges without using the enable password.\r\n\r\nNote: The Enable Secret feature is disabled by default.\r\n\r\nCisco has released software updates that address this vulnerability. There are workarounds that address this vulnerability.\r\n\r\nThis advisory is available at the following link:\r\nhttps://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-n3n9k-priv-escal-3QhXJBC [\"https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-n3n9k-priv-escal-3QhXJBC\"]\r\n\r\nThis advisory is part of the August 2020 Cisco FXOS and NX-OS Software Security Advisory Bundled Publication, which includes seven Cisco Security Advisories that describe seven vulnerabilities. For a complete list of the advisories and links to them, see Cisco Event Response: August 2020 Cisco FXOS and NX-OS Software Security Advisory Bundled Publication [\"https://sec.cloudapps.cisco.com/security/center/viewErp.x?alertId=ERP-74239\"].", "title": "Summary" }, { "category": "general", "text": "This vulnerability affects the following Cisco products if they are running a vulnerable release of Cisco NX-OS Software and have the feature privilege command and the enable secret command configured:\r\n\r\nNexus 3000 Series Switches\r\nNexus 9000 Series Switches in standalone NX-OS mode\r\n\r\nFor information about which Cisco software releases are vulnerable, see the Fixed Software [\"#fs\"] section of this advisory.", "title": "Vulnerable Products" }, { "category": "general", "text": "Only products listed in the Vulnerable Products [\"#vp\"] section of this advisory are known to be affected by this vulnerability.\r\n\r\nCisco has confirmed that this vulnerability does not affect the following Cisco products:\r\nFirepower 1000 Series\r\nFirepower 2100 Series\r\nFirepower 4100 Series\r\nFirepower 9300 Security Appliances\r\nMDS 9000 Series Multilayer Switches\r\nNexus 1000 Virtual Edge for VMware vSphere\r\nNexus 1000V Switch for Microsoft Hyper-V\r\nNexus 1000V Switch for VMware vSphere\r\nNexus 5500 Platform Switches\r\nNexus 5600 Platform Switches\r\nNexus 6000 Series Switches\r\nNexus 7000 Series Switches\r\nNexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode\r\nUCS 6200 Series Fabric Interconnects\r\nUCS 6300 Series Fabric Interconnects\r\nUCS 6400 Series Fabric Interconnects", "title": "Products Confirmed Not Vulnerable" }, { "category": "general", "text": "The enable secret command was added to Cisco NX-OS Software as a tool for migrating configurations from Cisco IOS Software to Cisco NX-OS Software only. The command serves no other purpose in Cisco NX-OS Software and should otherwise be disabled. The enable secret command will be removed in future releases.\r\n\r\nThe enable secret command is used in Cisco IOS Software to set a password that grants a user privileged administrative access to a Cisco IOS Software system. In Cisco NX-OS Software, there is no concept of an enable-secret or enable-password setting. Privileges are managed using role-based access control (RBAC). The functional equivalent to enabling mode access on a Cisco IOS Software device is assignment of an account to the network-admin (global privileged access) or vdc-admin (virtual device context [VDC]-specific privileged access) role in Cisco NX-OS Software.\r\n\r\nFor additional information, see the Cisco Guide to Securing NX-OS Software Devices [\"https://sec.cloudapps.cisco.com/security/center/resources/securing_nx_os.html\"].", "title": "Details" }, { "category": "general", "text": "To determine whether this vulnerability has been exploited, use the show accounting log | include \"enable\" command. The following example shows the output of this command after a low-privileged user has elevated their privilege by using the enable command:\r\n\r\n\r\nnxos# show accounting log | include \"enable\"\r\ntype=update:id=console0:user=guest:cmd=enable (SUCCESS)\r\ntype=update:id=console0:user=guest:cmd=enable 15 (SUCCESS)", "title": "Indicators of Compromise" }, { "category": "general", "text": "There is a workaround that addresses this vulnerability.\r\n\r\nCisco NX-OS Software uses RBAC to manage user accounts and privileges. For guidance, see the Configuring User Accounts and RBAC [\"https://www.cisco.com/en/US/docs/switches/datacenter/sw/4_1/nx-os/security/configuration/guide/sec_rbac.html\"] section of the Cisco NX-OS Security Configuration Guide.\r\n\r\nOnce RBAC is configured, remove the enable secret command from the configuration.", "title": "Workarounds" }, { "category": "general", "text": "Cisco has released free software updates that address the vulnerability described in this advisory. Customers may only install and expect support for software versions and feature sets for which they have purchased a license. By installing, downloading, accessing, or otherwise using such software upgrades, customers agree to follow the terms of the Cisco software license:\r\nhttps://www.cisco.com/c/en/us/products/end-user-license-agreement.html [\"https://www.cisco.com/c/en/us/products/end-user-license-agreement.html\"]\r\n\r\nAdditionally, customers may only download software for which they have a valid license, procured from Cisco directly, or through a Cisco authorized reseller or partner. In most cases this will be a maintenance upgrade to software that was previously purchased. Free security software updates do not entitle customers to a new software license, additional software feature sets, or major revision upgrades.\r\n\r\nWhen considering software upgrades [\"https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#fixes\"], customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories page [\"https://www.cisco.com/go/psirt\"], to determine exposure and a complete upgrade solution.\r\n\r\nIn all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.\r\n Customers Without Service Contracts\r\nCustomers who purchase directly from Cisco but do not hold a Cisco service contract and customers who make purchases through third-party vendors but are unsuccessful in obtaining fixed software through their point of sale should obtain upgrades by contacting the Cisco TAC: https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html [\"https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html\"]\r\n\r\nCustomers should have the product serial number available and be prepared to provide the URL of this advisory as evidence of entitlement to a free upgrade.\r\n Cisco NX-OS Software\r\nTo help customers determine their exposure to vulnerabilities in Cisco NX-OS Software, Cisco provides the Cisco Software Checker [\"https://sec.cloudapps.cisco.com/security/center/softwarechecker.x\"] to identify any Cisco Security Advisories that impact a specific Cisco NX-OS Software release and the earliest release that fixes the vulnerabilities that are described in each advisory (\u201cFirst Fixed\u201d). If applicable, the tool also returns the earliest release that fixes all the vulnerabilities described in all the advisories identified (\u201cCombined First Fixed\u201d).\r\n\r\nCustomers can use the Cisco Software Checker [\"https://sec.cloudapps.cisco.com/security/center/softwarechecker.x\"] to search advisories in the following ways:\r\n\r\nChoose the software, platform, and one or more releases\r\nUpload a .txt file that includes a list of specific releases\r\nEnter the output of the show version command\r\n\r\nAfter initiating a search, customers can customize the search to include all Cisco Security Advisories or one or more specific advisories.\r\n\r\nCustomers can also use the following form to determine whether a release is affected by any Cisco Security Advisory by choosing the Cisco NX-OS Software and platform and then entering a release\u2014for example, 7.0(3)I7(5) for Cisco Nexus 3000 Series Switches or 14.0(1h) for Cisco NX-OS Software in ACI mode:\r\n Cisco NX-OS Software Cisco NX-OS Software in ACI Mode MDS 9000 Series Multilayer Switches Nexus 1000V Series Switches Nexus 3000 Series Switches Nexus 5000 Series Switches Nexus 6000 Series Switches Nexus 7000 Series Switches Nexus 9000 Series Switches\r\n\r\n\r\n\r\n\r\nBy default, the Cisco Software Checker [\"https://sec.cloudapps.cisco.com/security/center/softwarechecker.x\"] includes results only for vulnerabilities that have a Critical or High Security Impact Rating (SIR). To include results for Medium SIR vulnerabilities, customers can use the Cisco Software Checker and check the Medium check box in the drop-down list under Impact Rating when customizing a search.\r\n Additional Resources\r\nFor help determining the best Cisco NX-OS Software release for a Cisco Nexus Switch, see the following Recommended Releases documents. If a security advisory recommends a later release, Cisco recommends following the advisory guidance.\r\n\r\n\r\nCisco MDS Series Switches [\"https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/b_MDS_NX-OS_Recommended_Releases.html\"]\r\nCisco Nexus 1000V for VMware Switch [\"http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus1000/sw/recommended_releases/b_Cisco_N1KV_VMware_MinRecommendedReleases.html\"]\r\nCisco Nexus 3000 Series Switches [\"http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus3000/sw/recommended_release/b_Minimum_and_Recommended_Cisco_NX-OS_Releases_for_Cisco_Nexus_3000_Series_Switches.html\"]\r\nCisco Nexus 5500 Platform Switches [\"http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5500/sw/release/recommended_releases/n5500_recommended_nx-os_releases.html\"]\r\nCisco Nexus 5600 Platform Switches [\"https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5600/sw/release/recommended_releases/n5600_recommended_nx-os_releases.html\"]\r\nCisco Nexus 6000 Series Switches [\"http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus6000/sw/release/recommended_releases/recommended_nx-os_releases.html\"]\r\nCisco Nexus 7000 Series Switches [\"http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-os/recommended_releases/recommended_nx-os_releases.html\"]\r\nCisco Nexus 9000 Series Switches [\"http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/recommended_release/b_Minimum_and_Recommended_Cisco_NX-OS_Releases_for_Cisco_Nexus_9000_Series_Switches.html\"]\r\nCisco Nexus 9000 Series ACI-Mode Switches [\"https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/recommended-release/b_Recommended_Cisco_ACI_Releases.html\"]\r\n\r\nTo determine the best release for Cisco UCS Software, see the Recommended Releases documents in the release notes for the device.", "title": "Fixed Software" }, { "category": "general", "text": "To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy [\"https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html\"]. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.", "title": "Vulnerability Policy" }, { "category": "general", "text": "The Cisco Product Security Incident Response Team (PSIRT) is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory.", "title": "Exploitation and Public Announcements" }, { "category": "general", "text": "This vulnerability was found during the resolution of a Cisco TAC support case.", "title": "Source" }, { "category": "legal_disclaimer", "text": "THIS DOCUMENT IS PROVIDED ON AN \"AS IS\" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.\r\n\r\nA standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products.", "title": "Legal Disclaimer" } ], "publisher": { "category": "vendor", "contact_details": "Emergency Support:\r\n+1 877 228 7302 (toll-free within North America)\r\n+1 408 525 6532 (International direct-dial)\r\nNon-emergency Support:\r\nEmail: psirt@cisco.com\r\nSupport requests that are received via e-mail are typically acknowledged within 48 hours.", "issuing_authority": "Cisco product security incident response is the responsibility of the Cisco Product Security Incident Response Team (PSIRT). The Cisco PSIRT is a dedicated, global team that manages the receipt, investigation, and public reporting of security vulnerability information that is related to Cisco products and networks. The on-call Cisco PSIRT works 24x7 with Cisco customers, independent security researchers, consultants, industry organizations, and other vendors to identify possible security issues with Cisco products and networks.\r\nMore information can be found in Cisco Security Vulnerability Policy available at https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html", "name": "Cisco", "namespace": "https://wwww.cisco.com" }, "references": [ { "category": "self", "summary": "Cisco Nexus 3000 and 9000 Series Switches Privilege Escalation Vulnerability", "url": "https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-n3n9k-priv-escal-3QhXJBC" }, { "category": "external", "summary": "Cisco Event Response: August 2020 Cisco FXOS and NX-OS Software Security Advisory Bundled Publication", "url": "https://sec.cloudapps.cisco.com/security/center/viewErp.x?alertId=ERP-74239" }, { "category": "external", "summary": "Cisco Security Vulnerability Policy", "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html" }, { "category": "external", "summary": "https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-n3n9k-priv-escal-3QhXJBC", "url": "https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-n3n9k-priv-escal-3QhXJBC" }, { "category": "external", "summary": "Cisco\u0026nbsp;Event Response: August 2020 Cisco\u0026nbsp;FXOS and NX-OS Software Security Advisory Bundled Publication", "url": "https://sec.cloudapps.cisco.com/security/center/viewErp.x?alertId=ERP-74239" }, { "category": "external", "summary": "Cisco\u0026nbsp;Guide to Securing NX-OS Software Devices", "url": "https://sec.cloudapps.cisco.com/security/center/resources/securing_nx_os.html" }, { "category": "external", "summary": "Configuring User Accounts and RBAC", "url": "https://www.cisco.com/en/US/docs/switches/datacenter/sw/4_1/nx-os/security/configuration/guide/sec_rbac.html" }, { "category": "external", "summary": "https://www.cisco.com/c/en/us/products/end-user-license-agreement.html", "url": "https://www.cisco.com/c/en/us/products/end-user-license-agreement.html" }, { "category": "external", "summary": "considering software upgrades", "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#fixes" }, { "category": "external", "summary": "Cisco\u0026nbsp;Security Advisories page", "url": "https://www.cisco.com/go/psirt" }, { "category": "external", "summary": "https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html", "url": "https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html" }, { "category": "external", "summary": "Cisco\u0026nbsp;Software Checker", "url": "https://sec.cloudapps.cisco.com/security/center/softwarechecker.x" }, { "category": "external", "summary": "Cisco\u0026nbsp;Software Checker", "url": "https://sec.cloudapps.cisco.com/security/center/softwarechecker.x" }, { "category": "external", "summary": "Cisco\u0026nbsp;Software Checker", "url": "https://sec.cloudapps.cisco.com/security/center/softwarechecker.x" }, { "category": "external", "summary": "Cisco\u0026nbsp;MDS Series Switches", "url": "https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/b_MDS_NX-OS_Recommended_Releases.html" }, { "category": "external", "summary": "Cisco\u0026nbsp;Nexus 1000V for VMware Switch", "url": "http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus1000/sw/recommended_releases/b_Cisco_N1KV_VMware_MinRecommendedReleases.html" }, { "category": "external", "summary": "Cisco\u0026nbsp;Nexus 3000 Series Switches", "url": "http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus3000/sw/recommended_release/b_Minimum_and_Recommended_Cisco_NX-OS_Releases_for_Cisco_Nexus_3000_Series_Switches.html" }, { "category": "external", "summary": "Cisco\u0026nbsp;Nexus 5500 Platform Switches", "url": "http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5500/sw/release/recommended_releases/n5500_recommended_nx-os_releases.html" }, { "category": "external", "summary": "Cisco\u0026nbsp;Nexus 5600 Platform Switches", "url": "https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5600/sw/release/recommended_releases/n5600_recommended_nx-os_releases.html" }, { "category": "external", "summary": "Cisco\u0026nbsp;Nexus 6000 Series Switches", "url": "http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus6000/sw/release/recommended_releases/recommended_nx-os_releases.html" }, { "category": "external", "summary": "Cisco\u0026nbsp;Nexus 7000 Series Switches", "url": "http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-os/recommended_releases/recommended_nx-os_releases.html" }, { "category": "external", "summary": "Cisco\u0026nbsp;Nexus 9000 Series Switches", "url": "http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/recommended_release/b_Minimum_and_Recommended_Cisco_NX-OS_Releases_for_Cisco_Nexus_9000_Series_Switches.html" }, { "category": "external", "summary": "Cisco\u0026nbsp;Nexus 9000 Series ACI-Mode Switches", "url": "https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/recommended-release/b_Recommended_Cisco_ACI_Releases.html" }, { "category": "external", "summary": "Security Vulnerability Policy", "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html" } ], "title": "Cisco Nexus 3000 and 9000 Series Switches Privilege Escalation Vulnerability", "tracking": { "current_release_date": "2020-08-26T20:59:18+00:00", "generator": { "date": "2022-10-22T03:05:48+00:00", "engine": { "name": "TVCE" } }, "id": "cisco-sa-n3n9k-priv-escal-3QhXJBC", "initial_release_date": "2020-08-26T16:00:00+00:00", "revision_history": [ { "date": "2020-08-18T20:28:27+00:00", "number": "1.0.0", "summary": "Initial public release." }, { "date": "2020-08-26T20:59:18+00:00", "number": "1.1.0", "summary": "Fixed Software Checker link." } ], "status": "final", "version": "1.1.0" } }, "product_tree": { "branches": [ { "branches": [ { "branches": [ { "branches": [ { "category": "service_pack", "name": "9.2(1)", "product": { "name": "9.2(1)", "product_id": "CSAFPID-248793" } }, { "category": "service_pack", "name": "9.2(2)", "product": { "name": "9.2(2)", "product_id": "CSAFPID-265141" } }, { "category": "service_pack", "name": "9.2(2t)", "product": { "name": "9.2(2t)", "product_id": "CSAFPID-265142" } }, { "category": "service_pack", "name": "9.2(3)", "product": { "name": "9.2(3)", "product_id": "CSAFPID-265143" } }, { "category": "service_pack", "name": "9.2(3y)", "product": { "name": "9.2(3y)", "product_id": "CSAFPID-265144" } }, { "category": "service_pack", "name": "9.2(4)", "product": { "name": "9.2(4)", "product_id": "CSAFPID-267105" } }, { "category": "service_pack", "name": "9.2(2v)", "product": { "name": "9.2(2v)", "product_id": "CSAFPID-268971" } } ], "category": "product_version", "name": "9.2" }, { "branches": [ { "category": "service_pack", "name": "9.3(1)", "product": { "name": "9.3(1)", "product_id": "CSAFPID-265568" } }, { "category": "service_pack", "name": "9.3(2)", "product": { "name": "9.3(2)", "product_id": "CSAFPID-271405" } }, { "category": "service_pack", "name": "9.3(3)", "product": { "name": "9.3(3)", "product_id": "CSAFPID-274557" } }, { "category": "service_pack", "name": "9.3(1z)", "product": { "name": "9.3(1z)", "product_id": "CSAFPID-276381" } } ], "category": "product_version", "name": "9.3" } ], "category": "product_family", "name": "Cisco NX-OS Software" }, { "category": "product_family", "name": "Cisco NX-OS Software", "product": { "name": "Cisco NX-OS Software ", "product_id": "CSAFPID-80720" } }, { "category": "product_name", "name": "Cisco Nexus 3000 Series Switches", "product": { "name": "Cisco Nexus 3000 Series Switches", "product_id": "CSAFPID-265091" } }, { "category": "product_name", "name": "Cisco Nexus 9000 Series Switches", "product": { "name": "Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-265096" } } ], "category": "vendor", "name": "Cisco" } ], "relationships": [ { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 9.2(1) when installed on Cisco Nexus 3000 Series Switches", "product_id": "CSAFPID-248793:265091" }, "product_reference": "CSAFPID-248793", "relates_to_product_reference": "CSAFPID-265091" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 9.2(1) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-248793:265096" }, "product_reference": "CSAFPID-248793", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 9.2(2) when installed on Cisco Nexus 3000 Series Switches", "product_id": "CSAFPID-265141:265091" }, "product_reference": "CSAFPID-265141", "relates_to_product_reference": "CSAFPID-265091" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 9.2(2) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-265141:265096" }, "product_reference": "CSAFPID-265141", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 9.2(2t) when installed on Cisco Nexus 3000 Series Switches", "product_id": "CSAFPID-265142:265091" }, "product_reference": "CSAFPID-265142", "relates_to_product_reference": "CSAFPID-265091" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 9.2(3) when installed on Cisco Nexus 3000 Series Switches", "product_id": "CSAFPID-265143:265091" }, "product_reference": "CSAFPID-265143", "relates_to_product_reference": "CSAFPID-265091" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 9.2(3) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-265143:265096" }, "product_reference": "CSAFPID-265143", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 9.2(3y) when installed on Cisco Nexus 3000 Series Switches", "product_id": "CSAFPID-265144:265091" }, "product_reference": "CSAFPID-265144", "relates_to_product_reference": "CSAFPID-265091" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 9.2(3y) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-265144:265096" }, "product_reference": "CSAFPID-265144", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 9.2(4) when installed on Cisco Nexus 3000 Series Switches", "product_id": "CSAFPID-267105:265091" }, "product_reference": "CSAFPID-267105", "relates_to_product_reference": "CSAFPID-265091" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 9.2(4) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-267105:265096" }, "product_reference": "CSAFPID-267105", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 9.2(2v) when installed on Cisco Nexus 3000 Series Switches", "product_id": "CSAFPID-268971:265091" }, "product_reference": "CSAFPID-268971", "relates_to_product_reference": "CSAFPID-265091" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 9.3(1) when installed on Cisco Nexus 3000 Series Switches", "product_id": "CSAFPID-265568:265091" }, "product_reference": "CSAFPID-265568", "relates_to_product_reference": "CSAFPID-265091" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 9.3(1) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-265568:265096" }, "product_reference": "CSAFPID-265568", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 9.3(2) when installed on Cisco Nexus 3000 Series Switches", "product_id": "CSAFPID-271405:265091" }, "product_reference": "CSAFPID-271405", "relates_to_product_reference": "CSAFPID-265091" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 9.3(2) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-271405:265096" }, "product_reference": "CSAFPID-271405", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 9.3(3) when installed on Cisco Nexus 3000 Series Switches", "product_id": "CSAFPID-274557:265091" }, "product_reference": "CSAFPID-274557", "relates_to_product_reference": "CSAFPID-265091" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 9.3(3) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-274557:265096" }, "product_reference": "CSAFPID-274557", "relates_to_product_reference": "CSAFPID-265096" }, { "category": "installed_on", "full_product_name": { "name": "Cisco NX-OS Software 9.3(1z) when installed on Cisco Nexus 9000 Series Switches", "product_id": "CSAFPID-276381:265096" }, "product_reference": "CSAFPID-276381", "relates_to_product_reference": "CSAFPID-265096" } ] }, "vulnerabilities": [ { "cve": "CVE-2020-3394", "ids": [ { "system_name": "Cisco Bug ID", "text": "CSCvt77885" } ], "notes": [ { "category": "other", "text": "Complete.", "title": "Affected Product Comprehensiveness" } ], "product_status": { "known_affected": [ "CSAFPID-248793:265091", "CSAFPID-248793:265096", "CSAFPID-265141:265091", "CSAFPID-265141:265096", "CSAFPID-265142:265091", "CSAFPID-265143:265091", "CSAFPID-265143:265096", "CSAFPID-265144:265091", "CSAFPID-265144:265096", "CSAFPID-265568:265091", "CSAFPID-265568:265096", "CSAFPID-267105:265091", "CSAFPID-267105:265096", "CSAFPID-268971:265091", "CSAFPID-271405:265091", "CSAFPID-271405:265096", "CSAFPID-274557:265091", "CSAFPID-274557:265096", "CSAFPID-276381:265096", "CSAFPID-80720" ] }, "release_date": "2020-08-26T16:00:00+00:00", "remediations": [ { "category": "vendor_fix", "details": "Cisco has released software updates that address this vulnerability.", "product_ids": [ "CSAFPID-248793:265091", "CSAFPID-248793:265096", "CSAFPID-265141:265091", "CSAFPID-265141:265096", "CSAFPID-265142:265091", "CSAFPID-265143:265091", "CSAFPID-265143:265096", "CSAFPID-265144:265091", "CSAFPID-265144:265096", "CSAFPID-265568:265091", "CSAFPID-265568:265096", "CSAFPID-267105:265091", "CSAFPID-267105:265096", "CSAFPID-268971:265091", "CSAFPID-271405:265091", "CSAFPID-271405:265096", "CSAFPID-274557:265091", "CSAFPID-274557:265096", "CSAFPID-276381:265096", "CSAFPID-80720" ], "url": "https://software.cisco.com" }, { "category": "workaround", "details": "There is a workaround that addresses this vulnerability.\r\n\r\nCisco NX-OS Software uses RBAC to manage user accounts and privileges. For guidance, see the Configuring User Accounts and RBAC [\"https://www.cisco.com/en/US/docs/switches/datacenter/sw/4_1/nx-os/security/configuration/guide/sec_rbac.html\"] section of the Cisco NX-OS Security Configuration Guide.\r\n\r\nOnce RBAC is configured, remove the enable secret command from the configuration.", "product_ids": [ "CSAFPID-248793:265091", "CSAFPID-248793:265096", "CSAFPID-265141:265091", "CSAFPID-265141:265096", "CSAFPID-265142:265091", "CSAFPID-265143:265091", "CSAFPID-265143:265096", "CSAFPID-265144:265091", "CSAFPID-265144:265096", "CSAFPID-265568:265091", "CSAFPID-265568:265096", "CSAFPID-267105:265091", "CSAFPID-267105:265096", "CSAFPID-268971:265091", "CSAFPID-271405:265091", "CSAFPID-271405:265096", "CSAFPID-274557:265091", "CSAFPID-274557:265096", "CSAFPID-276381:265096", "CSAFPID-80720" ] } ], "scores": [ { "cvss_v3": { "baseScore": 7.8, "baseSeverity": "HIGH", "vectorString": "CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H", "version": "3.0" }, "products": [ "CSAFPID-248793:265091", "CSAFPID-248793:265096", "CSAFPID-265141:265091", "CSAFPID-265141:265096", "CSAFPID-265142:265091", "CSAFPID-265143:265091", "CSAFPID-265143:265096", "CSAFPID-265144:265091", "CSAFPID-265144:265096", "CSAFPID-265568:265091", "CSAFPID-265568:265096", "CSAFPID-267105:265091", "CSAFPID-267105:265096", "CSAFPID-268971:265091", "CSAFPID-271405:265091", "CSAFPID-271405:265096", "CSAFPID-274557:265091", "CSAFPID-274557:265096", "CSAFPID-276381:265096", "CSAFPID-80720" ] } ], "title": "Cisco Nexus 3000 Series Switches and Nexus 9000 Series Switches Privilege Escalation Vulnerability" } ] }
Loading...
Loading...
Sightings
Author | Source | Type | Date |
---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or seen somewhere by the user.
- Confirmed: The vulnerability is confirmed from an analyst perspective.
- Exploited: This vulnerability was exploited and seen by the user reporting the sighting.
- Patched: This vulnerability was successfully patched by the user reporting the sighting.
- Not exploited: This vulnerability was not exploited or seen by the user reporting the sighting.
- Not confirmed: The user expresses doubt about the veracity of the vulnerability.
- Not patched: This vulnerability was not successfully patched by the user reporting the sighting.