cisco-sa-rv-rce-aqkreqp
Vulnerability from csaf_cisco
Published
2020-07-15 16:00
Modified
2020-07-15 16:00
Summary
Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers Management Interface Remote Command Execution Vulnerability
Notes
Summary
A vulnerability in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device.
The vulnerability is due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system of the affected device.
Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.
This advisory is available at the following link:
https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-rv-rce-AQKREqp ["https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-rv-rce-AQKREqp"]
Vulnerable Products
This vulnerability affects the following Cisco Small Business routers if they are running a vulnerable firmware release:
RV110W Wireless-N VPN Firewall
RV130 VPN Router
RV130W Wireless-N Multifunction VPN Router
RV215W Wireless-N VPN Router
For information about which Cisco firmware releases are vulnerable, see the Fixed Software ["#fs"] section of this advisory.
The web-based management interface of these devices is available through a local LAN connection, which cannot be disabled, or through the WAN connection if the remote management feature is enabled. By default, the remote management feature is disabled for these devices.
To determine whether the remote management feature is enabled for a device, administrators can open the web-based management interface and choose Basic Settings > Remote Management. If the Enable box is checked, remote management is enabled for the device.
Products Confirmed Not Vulnerable
Only products listed in the Vulnerable Products ["#vp"] section of this advisory are known to be affected by this vulnerability.
Workarounds
There are no workarounds that address this vulnerability.
However, disabling the remote management feature, if it is not required, would help to reduce the attack surface of this vulnerability.
Fixed Software
Cisco has released free software updates that address the vulnerability described in this advisory. Customers may only install and expect support for software versions and feature sets for which they have purchased a license. By installing, downloading, accessing, or otherwise using such software upgrades, customers agree to follow the terms of the Cisco software license: https://www.cisco.com/c/en/us/products/end-user-license-agreement.html ["https://www.cisco.com/c/en/us/products/end-user-license-agreement.html"]
Additionally, customers may only download software for which they have a valid license, procured from Cisco directly, or through a Cisco authorized reseller or partner. In most cases this will be a maintenance upgrade to software that was previously purchased. Free security software updates do not entitle customers to a new software license, additional software feature sets, or major revision upgrades.
When considering software upgrades ["https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#fixes"], customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories page ["https://www.cisco.com/go/psirt"], to determine exposure and a complete upgrade solution.
In all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.
Customers Without Service Contracts
Customers who purchase directly from Cisco but do not hold a Cisco service contract and customers who make purchases through third-party vendors but are unsuccessful in obtaining fixed software through their point of sale should obtain upgrades by contacting the Cisco TAC: https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html ["https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html"]
Customers should have the product serial number available and be prepared to provide the URL of this advisory as evidence of entitlement to a free upgrade.
Fixed Releases
Customers are advised to upgrade to an appropriate fixed firmware release as indicated in the following table:
Cisco Product First Fixed Release RV110W Wireless-N VPN Firewall 1.2.2.8 RV130 VPN Router 1.0.3.54 RV130W Wireless-N Multifunction VPN Router 1.0.3.54 RV215W Wireless-N VPN Router 1.3.1.7
To download the software from the Software Center ["https://software.cisco.com/download/navigator.html"] on Cisco.com ["http://cisco.com/"], do the following:
RV110W and RV215W
Click Browse all.
Choose Routers > Small Business Routers > Small Business RV Series Routers > RV110W Wireless-N VPN Firewall or RV215W Wireless-N VPN Router > Wireless Router Firmware.
Choose a release from the left pane of the RV110W Wireless-N VPN Firewall or RV215W Wireless-N VPN Router page.
RV130 and RV130W
Click Browse all.
Choose Routers > Small Business Routers > Small Business RV Series Routers > RV130 VPN Router or RV130W Wireless-N Multifunction VPN Router > Small Business Router Firmware.
Choose a release from the left pane of the RV130 VPN Router or RV130W Wireless-N Multifunction VPN Router page.
Vulnerability Policy
To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy ["https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html"]. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.
Exploitation and Public Announcements
The Cisco Product Security Incident Response Team (PSIRT) is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory.
Source
Cisco would like to thank Gyengtak Kim, Jeongun Baek, and Sanghyuk Lee of GeekPwn for reporting this vulnerability.
Legal Disclaimer
THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.
A standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products.
{ "document": { "acknowledgments": [ { "summary": "Cisco would like to thank Gyengtak Kim, Jeongun Baek, and Sanghyuk Lee of GeekPwn for reporting this vulnerability." } ], "category": "csaf_security_advisory", "csaf_version": "2.0", "notes": [ { "category": "summary", "text": "A vulnerability in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device.\r\n\r\nThe vulnerability is due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system of the affected device.\r\n\r\nCisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.\r\n\r\nThis advisory is available at the following link:\r\nhttps://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-rv-rce-AQKREqp [\"https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-rv-rce-AQKREqp\"]", "title": "Summary" }, { "category": "general", "text": "This vulnerability affects the following Cisco Small Business routers if they are running a vulnerable firmware release:\r\n\r\nRV110W Wireless-N VPN Firewall\r\nRV130 VPN Router\r\nRV130W Wireless-N Multifunction VPN Router\r\nRV215W Wireless-N VPN Router\r\n\r\nFor information about which Cisco firmware releases are vulnerable, see the Fixed Software [\"#fs\"] section of this advisory.\r\n\r\nThe web-based management interface of these devices is available through a local LAN connection, which cannot be disabled, or through the WAN connection if the remote management feature is enabled. By default, the remote management feature is disabled for these devices.\r\n\r\nTo determine whether the remote management feature is enabled for a device, administrators can open the web-based management interface and choose Basic Settings \u003e Remote Management. If the Enable box is checked, remote management is enabled for the device.", "title": "Vulnerable Products" }, { "category": "general", "text": "Only products listed in the Vulnerable Products [\"#vp\"] section of this advisory are known to be affected by this vulnerability.", "title": "Products Confirmed Not Vulnerable" }, { "category": "general", "text": "There are no workarounds that address this vulnerability.\r\n\r\nHowever, disabling the remote management feature, if it is not required, would help to reduce the attack surface of this vulnerability.", "title": "Workarounds" }, { "category": "general", "text": "Cisco has released free software updates that address the vulnerability described in this advisory. Customers may only install and expect support for software versions and feature sets for which they have purchased a license. By installing, downloading, accessing, or otherwise using such software upgrades, customers agree to follow the terms of the Cisco software license: https://www.cisco.com/c/en/us/products/end-user-license-agreement.html [\"https://www.cisco.com/c/en/us/products/end-user-license-agreement.html\"]\r\n\r\nAdditionally, customers may only download software for which they have a valid license, procured from Cisco directly, or through a Cisco authorized reseller or partner. In most cases this will be a maintenance upgrade to software that was previously purchased. Free security software updates do not entitle customers to a new software license, additional software feature sets, or major revision upgrades.\r\n\r\nWhen considering software upgrades [\"https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#fixes\"], customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories page [\"https://www.cisco.com/go/psirt\"], to determine exposure and a complete upgrade solution.\r\n\r\nIn all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.\r\n Customers Without Service Contracts\r\nCustomers who purchase directly from Cisco but do not hold a Cisco service contract and customers who make purchases through third-party vendors but are unsuccessful in obtaining fixed software through their point of sale should obtain upgrades by contacting the Cisco TAC: https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html [\"https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html\"]\r\n\r\nCustomers should have the product serial number available and be prepared to provide the URL of this advisory as evidence of entitlement to a free upgrade.\r\n Fixed Releases\r\nCustomers are advised to upgrade to an appropriate fixed firmware release as indicated in the following table:\r\n Cisco Product First Fixed Release RV110W Wireless-N VPN Firewall 1.2.2.8 RV130 VPN Router 1.0.3.54 RV130W Wireless-N Multifunction VPN Router 1.0.3.54 RV215W Wireless-N VPN Router 1.3.1.7\r\nTo download the software from the Software Center [\"https://software.cisco.com/download/navigator.html\"] on Cisco.com [\"http://cisco.com/\"], do the following:\r\n\r\nRV110W and RV215W\r\n\r\nClick Browse all.\r\nChoose Routers \u003e Small Business Routers \u003e Small Business RV Series Routers \u003e RV110W Wireless-N VPN Firewall or RV215W Wireless-N VPN Router \u003e Wireless Router Firmware.\r\nChoose a release from the left pane of the RV110W Wireless-N VPN Firewall or RV215W Wireless-N VPN Router page.\r\n\r\nRV130 and RV130W\r\n\r\nClick Browse all.\r\nChoose Routers \u003e Small Business Routers \u003e Small Business RV Series Routers \u003e RV130 VPN Router or RV130W Wireless-N Multifunction VPN Router \u003e Small Business Router Firmware.\r\nChoose a release from the left pane of the RV130 VPN Router or RV130W Wireless-N Multifunction VPN Router page.", "title": "Fixed Software" }, { "category": "general", "text": "To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy [\"https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html\"]. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.", "title": "Vulnerability Policy" }, { "category": "general", "text": "The Cisco Product Security Incident Response Team (PSIRT) is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory.", "title": "Exploitation and Public Announcements" }, { "category": "general", "text": "Cisco would like to thank Gyengtak Kim, Jeongun Baek, and Sanghyuk Lee of GeekPwn for reporting this vulnerability.", "title": "Source" }, { "category": "legal_disclaimer", "text": "THIS DOCUMENT IS PROVIDED ON AN \"AS IS\" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.\r\n\r\nA standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products.", "title": "Legal Disclaimer" } ], "publisher": { "category": "vendor", "contact_details": "Emergency Support:\r\n+1 877 228 7302 (toll-free within North America)\r\n+1 408 525 6532 (International direct-dial)\r\nNon-emergency Support:\r\nEmail: psirt@cisco.com\r\nSupport requests that are received via e-mail are typically acknowledged within 48 hours.", "issuing_authority": "Cisco product security incident response is the responsibility of the Cisco Product Security Incident Response Team (PSIRT). The Cisco PSIRT is a dedicated, global team that manages the receipt, investigation, and public reporting of security vulnerability information that is related to Cisco products and networks. The on-call Cisco PSIRT works 24x7 with Cisco customers, independent security researchers, consultants, industry organizations, and other vendors to identify possible security issues with Cisco products and networks.\r\nMore information can be found in Cisco Security Vulnerability Policy available at https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html", "name": "Cisco", "namespace": "https://wwww.cisco.com" }, "references": [ { "category": "self", "summary": "Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers Management Interface Remote Command Execution Vulnerability", "url": "https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-rv-rce-AQKREqp" }, { "category": "external", "summary": "Cisco Security Vulnerability Policy", "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html" }, { "category": "external", "summary": "https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-rv-rce-AQKREqp", "url": "https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-rv-rce-AQKREqp" }, { "category": "external", "summary": "https://www.cisco.com/c/en/us/products/end-user-license-agreement.html", "url": "https://www.cisco.com/c/en/us/products/end-user-license-agreement.html" }, { "category": "external", "summary": "considering software upgrades", "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#fixes" }, { "category": "external", "summary": "Cisco Security Advisories page", "url": "https://www.cisco.com/go/psirt" }, { "category": "external", "summary": "https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html", "url": "https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html" }, { "category": "external", "summary": "Software Center", "url": "https://software.cisco.com/download/navigator.html" }, { "category": "external", "summary": "Cisco.com", "url": "http://cisco.com/" }, { "category": "external", "summary": "Security Vulnerability Policy", "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html" } ], "title": "Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers Management Interface Remote Command Execution Vulnerability", "tracking": { "current_release_date": "2020-07-15T16:00:00+00:00", "generator": { "date": "2022-10-22T03:04:23+00:00", "engine": { "name": "TVCE" } }, "id": "cisco-sa-rv-rce-AQKREqp", "initial_release_date": "2020-07-15T16:00:00+00:00", "revision_history": [ { "date": "2020-07-15T15:42:30+00:00", "number": "1.0.0", "summary": "Initial public release." } ], "status": "final", "version": "1.0.0" } }, "product_tree": { "branches": [ { "branches": [ { "category": "product_family", "name": "Cisco Small Business RV Series Router Firmware", "product": { "name": "Cisco Small Business RV Series Router Firmware ", "product_id": "CSAFPID-183630" } } ], "category": "vendor", "name": "Cisco" } ] }, "vulnerabilities": [ { "cve": "CVE-2020-3323", "ids": [ { "system_name": "Cisco Bug ID", "text": "CSCvr97884" }, { "system_name": "Cisco Bug ID", "text": "CSCvr97889" }, { "system_name": "Cisco Bug ID", "text": "CSCvr97864" } ], "notes": [ { "category": "other", "text": "Complete.", "title": "Affected Product Comprehensiveness" } ], "product_status": { "known_affected": [ "CSAFPID-183630" ] }, "release_date": "2020-07-15T16:00:00+00:00", "remediations": [ { "category": "vendor_fix", "details": "Cisco has released software updates that address this vulnerability.", "product_ids": [ "CSAFPID-183630" ], "url": "https://software.cisco.com" } ], "scores": [ { "cvss_v3": { "baseScore": 9.8, "baseSeverity": "CRITICAL", "vectorString": "CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H", "version": "3.0" }, "products": [ "CSAFPID-183630" ] } ], "title": "Cisco RV110W, RV130, RV130W, and RV215W Routers Management Interface Remote Command Execution Vulnerability" } ] }
Loading...
Loading...
Sightings
Author | Source | Type | Date |
---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or seen somewhere by the user.
- Confirmed: The vulnerability is confirmed from an analyst perspective.
- Exploited: This vulnerability was exploited and seen by the user reporting the sighting.
- Patched: This vulnerability was successfully patched by the user reporting the sighting.
- Not exploited: This vulnerability was not exploited or seen by the user reporting the sighting.
- Not confirmed: The user expresses doubt about the veracity of the vulnerability.
- Not patched: This vulnerability was not successfully patched by the user reporting the sighting.