cisco-sa-sb-wap-inject-mp9fsdg
Vulnerability from csaf_cisco
Published
2021-05-19 16:00
Modified
2021-08-03 15:59
Summary
Cisco Small Business 100, 300, and 500 Series Wireless Access Points Command Injection Vulnerabilities

Notes

Summary
Multiple vulnerabilities in the web-based management interface of certain Cisco Small Business 100, 300, and 500 Series Wireless Access Points could allow an authenticated, remote attacker to perform command injection attacks against an affected device. These vulnerabilities are due to improper validation of user-supplied input. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to the web-based management interface of an affected system. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the device. To exploit these vulnerabilities, the attacker must have valid administrative credentials for the device. Cisco has released software updates that address these vulnerabilities. There are no workarounds that address these vulnerabilities. This advisory is available at the following link: https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-sb-wap-inject-Mp9FSdG ["https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-sb-wap-inject-Mp9FSdG"]
Vulnerable Products
At the time of publication, these vulnerabilities affected the following Cisco Small Business 100, 300, and 500 Series Wireless Access Points and firmware releases: Cisco Product Vulnerable Releases WAP121 Wireless-N Access Point with Single Point Setup1 1.0.6.8 and earlier WAP125 Wireless-AC Dual Band Desktop Access Point with PoE 1.0.3.1 and earlier WAP131 Wireless-N Dual Radio Access Point with PoE 1 1.0.2.17 and earlier WAP150 Wireless-AC/N Dual Radio Access Point with PoE 1.1.2.4 and earlier WAP321 Wireless-N Access Point with Single Point Setup1 1.0.6.7 and earlier WAP351 Wireless-N Dual Radio Access Point with 5-Port Switch1 1.0.2.17 and earlier WAP361 Wireless-AC/N Dual Radio Wall Plate Access Point with PoE 1.1.2.4 and earlier WAP581 Wireless-AC Dual Radio Wave 2 Access Point with 2.5GbE LAN 1.0.3.1 and earlier 1 Cisco WAP121 Wireless-N Dual Radio Access Points with PoE, Cisco WAP131 Wireless-N Dual Radio Access Points with PoE, Cisco WAP321 Wireless-N Access Point with Single Point Setup and Cisco WAP351 Wireless-N Dual Radio Access Points with 5-Port Switch have entered the end-of-life process. For more details, see the Fixed Software ["#fs"] section of this advisory. See the Details section in the bug ID(s) at the top of this advisory for the most complete and current information.
Products Confirmed Not Vulnerable
Only products listed in the Vulnerable Products ["#vp"] section of this advisory are known to be affected by these vulnerabilities.
Workarounds
There are no workarounds that address these vulnerabilities.
Fixed Software
When considering software upgrades ["https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#fixes"], customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories page ["https://www.cisco.com/go/psirt"], to determine exposure and a complete upgrade solution. In all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers. Fixed Releases At the time of publication, the release information in the following table(s) was accurate. See the Details section in the bug ID(s) at the top of this advisory for the most complete and current information. The left column lists Cisco software releases, and the right column indicates whether a release was affected by the vulnerabilities described in this advisory and which release included the fix for these vulnerabilities. Cisco Product First Fixed Release WAP125 Wireless-AC Dual Band Desktop Access Point with PoE 1.0.4.3 WAP150 Wireless-AC/N Dual Radio Access Point with PoE 1.1.3.2 WAP361 Wireless-AC/N Dual Radio Wall Plate Access Point with PoE 1.1.3.2 WAP581 Wireless-AC Dual Radio Wave 2 Access Point with 2.5GbE LAN 1.0.4.4 WAP 121, WAP131, WAP321 and WAP351 Access Points Cisco has not released and will not release firmware updates for Cisco WAP121 Wireless-N Access Point with Single Point Setup, Cisco WAP131 Wireless-N Dual Radio Access Point with PoE, Cisco WAP321 Wireless-N Access Point with Single Point Setup and Cisco WAP351 Wireless-N Dual Radio Access Point with 5-Port Switch to address the vulnerabilities described in this advisory. These products have entered the end-of-life process. Customers are advised to refer to the end-of-life notices for these products: End-of-Sale and End-of-Life Announcement for the Cisco WAP121 Wireless-N Access Point with Single Point Setup ["https://www.cisco.com/c/en/us/products/collateral/wireless/small-business-wireless-access-points/eos-eol-notice-c51-742551.html"] End-of-Sale and End-of-Life Announcement for the Cisco WAP131 Wireless-N Dual Radio Access Point with PoE ["https://www.cisco.com/c/en/us/products/collateral/wireless/small-business-wireless-access-points/eos-eol-notice-c51-741422.html"] End-of-Sale and End-of-Life Announcement for the Cisco WAP321 Wireless-N Access Point with Single Point Setup ["https://www.cisco.com/c/en/us/products/collateral/wireless/small-business-wireless-access-points/eos-eol-notice-c51-738391.html"] End-of-Sale and End-of-Life Announcement for the Cisco WAP351 Wireless-N Dual Radio Access Point with 5-Port Switch ["https://www.cisco.com/c/en/us/products/collateral/wireless/small-business-wireless-access-points/eos-eol-notice-c51-738539.html"] Customers are encouraged to migrate to the Cisco Small Business 100, 300, and 500 Series Wireless Access Points suggested in each of the end-of-life notices. When considering a device migration, customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories page ["https://www.cisco.com/go/psirt"], to determine exposure and a complete upgrade solution. In all cases, customers should ensure that new access point will be sufficient for their network needs, contains sufficient memory, and current hardware and software configurations will continue to be supported properly by the new product. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.
Vulnerability Policy
To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy ["https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html"]. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.
Exploitation and Public Announcements
The Cisco Product Security Incident Response Team (PSIRT) is not aware of any malicious use of the vulnerabilities that are described in this advisory.
Source
Cisco would like to thank the KrCERT/CC Vulnerability Analysis Team for reporting these vulnerabilities.
Legal Disclaimer
THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME. A standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products.



{
  "document": {
    "acknowledgments": [
      {
        "summary": "Cisco would like to thank the KrCERT/CC Vulnerability Analysis Team for reporting these vulnerabilities."
      }
    ],
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "notes": [
      {
        "category": "summary",
        "text": "Multiple vulnerabilities in the web-based management interface of certain Cisco Small Business 100, 300, and 500 Series Wireless Access Points could allow an authenticated, remote attacker to perform command injection attacks against an affected device.\r\n\r\nThese vulnerabilities are due to improper validation of user-supplied input. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to the web-based management interface of an affected system. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the device. To exploit these vulnerabilities, the attacker must have valid administrative credentials for the device.\r\n\r\nCisco has released software updates that address these vulnerabilities. There are no workarounds that address these vulnerabilities.\r\n\r\nThis advisory is available at the following link:\r\nhttps://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-sb-wap-inject-Mp9FSdG [\"https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-sb-wap-inject-Mp9FSdG\"]",
        "title": "Summary"
      },
      {
        "category": "general",
        "text": "At the time of publication, these vulnerabilities affected the following Cisco Small Business 100, 300, and 500 Series Wireless Access Points and firmware releases:\r\n        Cisco Product  Vulnerable Releases          WAP121 Wireless-N Access Point with Single Point Setup1  1.0.6.8 and earlier      WAP125 Wireless-AC Dual Band Desktop Access Point with PoE  1.0.3.1 and earlier      WAP131 Wireless-N Dual Radio Access Point with PoE 1  1.0.2.17 and earlier      WAP150 Wireless-AC/N Dual Radio Access Point with PoE  1.1.2.4 and earlier      WAP321 Wireless-N Access Point with Single Point Setup1  1.0.6.7 and earlier      WAP351 Wireless-N Dual Radio Access Point with 5-Port Switch1  1.0.2.17 and earlier      WAP361 Wireless-AC/N Dual Radio Wall Plate Access Point with PoE  1.1.2.4 and earlier      WAP581 Wireless-AC Dual Radio Wave 2 Access Point with 2.5GbE LAN  1.0.3.1 and earlier\r\n\r\n1 Cisco WAP121 Wireless-N Dual Radio Access Points with PoE, Cisco WAP131 Wireless-N Dual Radio Access Points with PoE, Cisco WAP321 Wireless-N Access Point with Single Point Setup and Cisco WAP351 Wireless-N Dual Radio Access Points with 5-Port Switch have entered the end-of-life process. For more details, see the Fixed Software [\"#fs\"] section of this advisory.\r\n\r\nSee the Details section in the bug ID(s) at the top of this advisory for the most complete and current information.",
        "title": "Vulnerable Products"
      },
      {
        "category": "general",
        "text": "Only products listed in the Vulnerable Products [\"#vp\"] section of this advisory are known to be affected by these vulnerabilities.",
        "title": "Products Confirmed Not Vulnerable"
      },
      {
        "category": "general",
        "text": "There are no workarounds that address these vulnerabilities.",
        "title": "Workarounds"
      },
      {
        "category": "general",
        "text": "When considering software upgrades [\"https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#fixes\"], customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories page [\"https://www.cisco.com/go/psirt\"], to determine exposure and a complete upgrade solution.\r\n\r\nIn all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.\r\n      Fixed Releases\r\nAt the time of publication, the release information in the following table(s) was accurate. See the Details section in the bug ID(s) at the top of this advisory for the most complete and current information.\r\n\r\nThe left column lists Cisco software releases, and the right column indicates whether a release was affected by the vulnerabilities described in this advisory and which release included the fix for these vulnerabilities.\r\n        Cisco Product  First Fixed Release          WAP125 Wireless-AC Dual Band Desktop Access Point with PoE  1.0.4.3      WAP150 Wireless-AC/N Dual Radio Access Point with PoE  1.1.3.2      WAP361 Wireless-AC/N Dual Radio Wall Plate Access Point with PoE  1.1.3.2      WAP581 Wireless-AC Dual Radio Wave 2 Access Point with 2.5GbE LAN  1.0.4.4\r\nWAP 121, WAP131, WAP321 and WAP351 Access Points\r\n\r\nCisco has not released and will not release firmware updates for Cisco WAP121 Wireless-N Access Point with Single Point Setup, Cisco WAP131 Wireless-N Dual Radio Access Point with PoE, Cisco WAP321 Wireless-N Access Point with Single Point Setup and Cisco WAP351 Wireless-N Dual Radio Access Point with 5-Port Switch to address the vulnerabilities described in this advisory. These products have entered the end-of-life process. Customers are advised to refer to the end-of-life notices for these products:\r\n\r\nEnd-of-Sale and End-of-Life Announcement for the Cisco WAP121 Wireless-N Access Point with Single Point Setup [\"https://www.cisco.com/c/en/us/products/collateral/wireless/small-business-wireless-access-points/eos-eol-notice-c51-742551.html\"]\r\n\r\nEnd-of-Sale and End-of-Life Announcement for the Cisco WAP131 Wireless-N Dual Radio Access Point with PoE [\"https://www.cisco.com/c/en/us/products/collateral/wireless/small-business-wireless-access-points/eos-eol-notice-c51-741422.html\"]\r\n\r\nEnd-of-Sale and End-of-Life Announcement for the Cisco WAP321 Wireless-N Access Point with Single Point Setup [\"https://www.cisco.com/c/en/us/products/collateral/wireless/small-business-wireless-access-points/eos-eol-notice-c51-738391.html\"]\r\n\r\nEnd-of-Sale and End-of-Life Announcement for the Cisco WAP351 Wireless-N Dual Radio Access Point with 5-Port Switch [\"https://www.cisco.com/c/en/us/products/collateral/wireless/small-business-wireless-access-points/eos-eol-notice-c51-738539.html\"]\r\n\r\nCustomers are encouraged to migrate to the Cisco Small Business 100, 300, and 500 Series Wireless Access Points suggested in each of the end-of-life notices.\r\n\r\nWhen considering a device migration, customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories page [\"https://www.cisco.com/go/psirt\"], to determine exposure and a complete upgrade solution.\r\n\r\nIn all cases, customers should ensure that new access point will be sufficient for their network needs, contains sufficient memory, and current hardware and software configurations will continue to be supported properly by the new product. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.",
        "title": "Fixed Software"
      },
      {
        "category": "general",
        "text": "To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy [\"https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html\"]. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.",
        "title": "Vulnerability Policy"
      },
      {
        "category": "general",
        "text": "The Cisco Product Security Incident Response Team (PSIRT) is not aware of any malicious use of the vulnerabilities that are described in this advisory.",
        "title": "Exploitation and Public Announcements"
      },
      {
        "category": "general",
        "text": "Cisco would like to thank the KrCERT/CC Vulnerability Analysis Team for reporting these vulnerabilities.",
        "title": "Source"
      },
      {
        "category": "legal_disclaimer",
        "text": "THIS DOCUMENT IS PROVIDED ON AN \"AS IS\" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.\r\n\r\nA standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products.",
        "title": "Legal Disclaimer"
      }
    ],
    "publisher": {
      "category": "vendor",
      "contact_details": "Emergency Support:\r\n+1 877 228 7302 (toll-free within North America)\r\n+1 408 525 6532 (International direct-dial)\r\nNon-emergency Support:\r\nEmail: psirt@cisco.com\r\nSupport requests that are received via e-mail are typically acknowledged within 48 hours.",
      "issuing_authority": "Cisco product security incident response is the responsibility of the Cisco Product Security Incident Response Team (PSIRT). The Cisco PSIRT is a dedicated, global team that manages the receipt, investigation, and public reporting of security vulnerability information that is related to Cisco products and networks. The on-call Cisco PSIRT works 24x7 with Cisco customers, independent security researchers, consultants, industry organizations, and other vendors to identify possible security issues with Cisco products and networks.\r\nMore information can be found in Cisco Security Vulnerability Policy available at https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html",
      "name": "Cisco",
      "namespace": "https://wwww.cisco.com"
    },
    "references": [
      {
        "category": "self",
        "summary": "Cisco\u00a0Small Business 100, 300, and 500 Series Wireless Access Points Command Injection Vulnerabilities",
        "url": "https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-sb-wap-inject-Mp9FSdG"
      },
      {
        "category": "external",
        "summary": "Cisco Security Vulnerability Policy",
        "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html"
      },
      {
        "category": "external",
        "summary": "https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-sb-wap-inject-Mp9FSdG",
        "url": "https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-sb-wap-inject-Mp9FSdG"
      },
      {
        "category": "external",
        "summary": "considering software upgrades",
        "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#fixes"
      },
      {
        "category": "external",
        "summary": "Cisco\u0026nbsp;Security Advisories page",
        "url": "https://www.cisco.com/go/psirt"
      },
      {
        "category": "external",
        "summary": "End-of-Sale and End-of-Life Announcement for the Cisco\u0026nbsp;WAP121 Wireless-N Access Point with Single Point Setup",
        "url": "https://www.cisco.com/c/en/us/products/collateral/wireless/small-business-wireless-access-points/eos-eol-notice-c51-742551.html"
      },
      {
        "category": "external",
        "summary": "End-of-Sale and End-of-Life Announcement for the Cisco\u0026nbsp;WAP131 Wireless-N Dual Radio Access Point with PoE",
        "url": "https://www.cisco.com/c/en/us/products/collateral/wireless/small-business-wireless-access-points/eos-eol-notice-c51-741422.html"
      },
      {
        "category": "external",
        "summary": "End-of-Sale and End-of-Life Announcement for the Cisco\u0026nbsp;WAP321 Wireless-N Access Point with Single Point Setup",
        "url": "https://www.cisco.com/c/en/us/products/collateral/wireless/small-business-wireless-access-points/eos-eol-notice-c51-738391.html"
      },
      {
        "category": "external",
        "summary": "End-of-Sale and End-of-Life Announcement for the Cisco\u0026nbsp;WAP351 Wireless-N Dual Radio Access Point with 5-Port Switch",
        "url": "https://www.cisco.com/c/en/us/products/collateral/wireless/small-business-wireless-access-points/eos-eol-notice-c51-738539.html"
      },
      {
        "category": "external",
        "summary": "Cisco\u0026nbsp;Security Advisories page",
        "url": "https://www.cisco.com/go/psirt"
      },
      {
        "category": "external",
        "summary": "Security Vulnerability Policy",
        "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html"
      }
    ],
    "title": "Cisco\u00a0Small Business 100, 300, and 500 Series Wireless Access Points Command Injection Vulnerabilities",
    "tracking": {
      "current_release_date": "2021-08-03T15:59:45+00:00",
      "generator": {
        "date": "2022-10-22T03:11:08+00:00",
        "engine": {
          "name": "TVCE"
        }
      },
      "id": "cisco-sa-sb-wap-inject-Mp9FSdG",
      "initial_release_date": "2021-05-19T16:00:00+00:00",
      "revision_history": [
        {
          "date": "2021-05-19T15:14:08+00:00",
          "number": "1.0.0",
          "summary": "Initial public release."
        },
        {
          "date": "2021-08-03T15:59:45+00:00",
          "number": "1.1.0",
          "summary": "Updated vulnerable products."
        }
      ],
      "status": "final",
      "version": "1.1.0"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "category": "product_family",
            "name": "Cisco Business Wireless Access Point Software",
            "product": {
              "name": "Cisco Business Wireless Access Point Software ",
              "product_id": "CSAFPID-280012"
            }
          }
        ],
        "category": "vendor",
        "name": "Cisco"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2021-1547",
      "ids": [
        {
          "system_name": "Cisco Bug ID",
          "text": "CSCvx46599"
        },
        {
          "system_name": "Cisco Bug ID",
          "text": "CSCvy89107"
        }
      ],
      "notes": [
        {
          "category": "other",
          "text": "Complete.",
          "title": "Affected Product Comprehensiveness"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-280012"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Cisco has released software updates that address this vulnerability.",
          "product_ids": [
            "CSAFPID-280012"
          ],
          "url": "https://software.cisco.com"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-280012"
          ]
        }
      ],
      "title": "Cisco Small Business 100, 300, and 500 Series Wireless Access Points Command Injection Vulnerability"
    },
    {
      "cve": "CVE-2021-1554",
      "ids": [
        {
          "system_name": "Cisco Bug ID",
          "text": "CSCvx46599"
        },
        {
          "system_name": "Cisco Bug ID",
          "text": "CSCvy89107"
        }
      ],
      "notes": [
        {
          "category": "other",
          "text": "Complete.",
          "title": "Affected Product Comprehensiveness"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-280012"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Cisco has released software updates that address this vulnerability.",
          "product_ids": [
            "CSAFPID-280012"
          ],
          "url": "https://software.cisco.com"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-280012"
          ]
        }
      ],
      "title": "Cisco Small Business 100, 300, and 500 Series Wireless Access Points Command Injection Vulnerability"
    },
    {
      "cve": "CVE-2021-1555",
      "ids": [
        {
          "system_name": "Cisco Bug ID",
          "text": "CSCvx46599"
        },
        {
          "system_name": "Cisco Bug ID",
          "text": "CSCvy89107"
        }
      ],
      "notes": [
        {
          "category": "other",
          "text": "Complete.",
          "title": "Affected Product Comprehensiveness"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-280012"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Cisco has released software updates that address this vulnerability.",
          "product_ids": [
            "CSAFPID-280012"
          ],
          "url": "https://software.cisco.com"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-280012"
          ]
        }
      ],
      "title": "Cisco Small Business 100, 300, and 500 Series Wireless Access Points Command Injection Vulnerability"
    },
    {
      "cve": "CVE-2021-1552",
      "ids": [
        {
          "system_name": "Cisco Bug ID",
          "text": "CSCvx46599"
        },
        {
          "system_name": "Cisco Bug ID",
          "text": "CSCvy89107"
        }
      ],
      "notes": [
        {
          "category": "other",
          "text": "Complete.",
          "title": "Affected Product Comprehensiveness"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-280012"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Cisco has released software updates that address this vulnerability.",
          "product_ids": [
            "CSAFPID-280012"
          ],
          "url": "https://software.cisco.com"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-280012"
          ]
        }
      ],
      "title": "Cisco Small Business 100, 300, and 500 Series Wireless Access Points Command Injection Vulnerability"
    },
    {
      "cve": "CVE-2021-1550",
      "ids": [
        {
          "system_name": "Cisco Bug ID",
          "text": "CSCvx46599"
        },
        {
          "system_name": "Cisco Bug ID",
          "text": "CSCvy89107"
        }
      ],
      "notes": [
        {
          "category": "other",
          "text": "Complete.",
          "title": "Affected Product Comprehensiveness"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-280012"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Cisco has released software updates that address this vulnerability.",
          "product_ids": [
            "CSAFPID-280012"
          ],
          "url": "https://software.cisco.com"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-280012"
          ]
        }
      ],
      "title": "Cisco Small Business 100, 300, and 500 Series Wireless Access Points Command Injection Vulnerability"
    },
    {
      "cve": "CVE-2021-1553",
      "ids": [
        {
          "system_name": "Cisco Bug ID",
          "text": "CSCvx46599"
        },
        {
          "system_name": "Cisco Bug ID",
          "text": "CSCvy89107"
        }
      ],
      "notes": [
        {
          "category": "other",
          "text": "Complete.",
          "title": "Affected Product Comprehensiveness"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-280012"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Cisco has released software updates that address this vulnerability.",
          "product_ids": [
            "CSAFPID-280012"
          ],
          "url": "https://software.cisco.com"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-280012"
          ]
        }
      ],
      "title": "Cisco Small Business 100, 300, and 500 Series Wireless Access Points Command Injection Vulnerability"
    },
    {
      "cve": "CVE-2021-1549",
      "ids": [
        {
          "system_name": "Cisco Bug ID",
          "text": "CSCvx46599"
        },
        {
          "system_name": "Cisco Bug ID",
          "text": "CSCvy89107"
        }
      ],
      "notes": [
        {
          "category": "other",
          "text": "Complete.",
          "title": "Affected Product Comprehensiveness"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-280012"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Cisco has released software updates that address this vulnerability.",
          "product_ids": [
            "CSAFPID-280012"
          ],
          "url": "https://software.cisco.com"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-280012"
          ]
        }
      ],
      "title": "Cisco Small Business 100, 300, and 500 Series Wireless Access Points Command Injection Vulnerability"
    },
    {
      "cve": "CVE-2021-1548",
      "ids": [
        {
          "system_name": "Cisco Bug ID",
          "text": "CSCvx46599"
        },
        {
          "system_name": "Cisco Bug ID",
          "text": "CSCvy89107"
        }
      ],
      "notes": [
        {
          "category": "other",
          "text": "Complete.",
          "title": "Affected Product Comprehensiveness"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-280012"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Cisco has released software updates that address this vulnerability.",
          "product_ids": [
            "CSAFPID-280012"
          ],
          "url": "https://software.cisco.com"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-280012"
          ]
        }
      ],
      "title": "Cisco Small Business 100, 300, and 500 Series Wireless Access Points Command Injection Vulnerability"
    },
    {
      "cve": "CVE-2021-1551",
      "ids": [
        {
          "system_name": "Cisco Bug ID",
          "text": "CSCvx46599"
        },
        {
          "system_name": "Cisco Bug ID",
          "text": "CSCvy89107"
        }
      ],
      "notes": [
        {
          "category": "other",
          "text": "Complete.",
          "title": "Affected Product Comprehensiveness"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-280012"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Cisco has released software updates that address this vulnerability.",
          "product_ids": [
            "CSAFPID-280012"
          ],
          "url": "https://software.cisco.com"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-280012"
          ]
        }
      ],
      "title": "Cisco Small Business 100, 300, and 500 Series Wireless Access Points Command Injection Vulnerability"
    }
  ]
}


Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading...

Loading...

Loading...

Sightings

Author Source Type Date

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or seen somewhere by the user.
  • Confirmed: The vulnerability is confirmed from an analyst perspective.
  • Exploited: This vulnerability was exploited and seen by the user reporting the sighting.
  • Patched: This vulnerability was successfully patched by the user reporting the sighting.
  • Not exploited: This vulnerability was not exploited or seen by the user reporting the sighting.
  • Not confirmed: The user expresses doubt about the veracity of the vulnerability.
  • Not patched: This vulnerability was not successfully patched by the user reporting the sighting.