{
  "GSD": {
    "alias": "CVE-2020-3390",
    "description": "A vulnerability in Simple Network Management Protocol (SNMP) trap generation for wireless clients of the Cisco IOS XE Wireless Controller Software for the Cisco Catalyst 9000 Family could allow an unauthenticated, adjacent attacker to cause the device to unexpectedly reload, causing a denial of service (DoS) condition on an affected device. The vulnerability is due to the lack of input validation of the information used to generate an SNMP trap in relation to a wireless client connection. An attacker could exploit this vulnerability by sending an 802.1x packet with crafted parameters during the wireless authentication setup phase of a connection. A successful exploit could allow the attacker to cause the device to reload, causing a DoS condition.",
    "id": "GSD-2020-3390"
  },
  "gsd": {
    "metadata": {
      "exploitCode": "unknown",
      "remediation": "unknown",
      "reportConfidence": "confirmed",
      "type": "vulnerability"
    },
    "osvSchema": {
      "aliases": [
        "CVE-2020-3390"
      ],
      "details": "A vulnerability in Simple Network Management Protocol (SNMP) trap generation for wireless clients of the Cisco IOS XE Wireless Controller Software for the Cisco Catalyst 9000 Family could allow an unauthenticated, adjacent attacker to cause the device to unexpectedly reload, causing a denial of service (DoS) condition on an affected device. The vulnerability is due to the lack of input validation of the information used to generate an SNMP trap in relation to a wireless client connection. An attacker could exploit this vulnerability by sending an 802.1x packet with crafted parameters during the wireless authentication setup phase of a connection. A successful exploit could allow the attacker to cause the device to reload, causing a DoS condition.",
      "id": "GSD-2020-3390",
      "modified": "2023-12-13T01:22:09.351798Z",
      "schema_version": "1.4.0"
    }
  },
  "namespaces": {
    "cve.org": {
      "CVE_data_meta": {
        "ASSIGNER": "psirt@cisco.com",
        "DATE_PUBLIC": "2020-09-24T16:00:00",
        "ID": "CVE-2020-3390",
        "STATE": "PUBLIC",
        "TITLE": "Cisco IOS XE Wireless Controller Software for the Catalyst 9000 Family SNMP Trap Denial of Service Vulnerability"
      },
      "affects": {
        "vendor": {
          "vendor_data": [
            {
              "product": {
                "product_data": [
                  {
                    "product_name": "Cisco IOS XE Software ",
                    "version": {
                      "version_data": [
                        {
                          "version_value": "n/a"
                        }
                      ]
                    }
                  }
                ]
              },
              "vendor_name": "Cisco"
            }
          ]
        }
      },
      "data_format": "MITRE",
      "data_type": "CVE",
      "data_version": "4.0",
      "description": {
        "description_data": [
          {
            "lang": "eng",
            "value": "A vulnerability in Simple Network Management Protocol (SNMP) trap generation for wireless clients of the Cisco IOS XE Wireless Controller Software for the Cisco Catalyst 9000 Family could allow an unauthenticated, adjacent attacker to cause the device to unexpectedly reload, causing a denial of service (DoS) condition on an affected device. The vulnerability is due to the lack of input validation of the information used to generate an SNMP trap in relation to a wireless client connection. An attacker could exploit this vulnerability by sending an 802.1x packet with crafted parameters during the wireless authentication setup phase of a connection. A successful exploit could allow the attacker to cause the device to reload, causing a DoS condition."
          }
        ]
      },
      "exploit": [
        {
          "lang": "eng",
          "value": "The Cisco Product Security Incident Response Team (PSIRT) is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory. "
        }
      ],
      "impact": {
        "cvss": {
          "baseScore": "7.4",
          "vectorString": "CVSS:3.0/AV:A/AC:L/PR:N/UI:N/S:C/C:N/I:N/A:H ",
          "version": "3.0"
        }
      },
      "problemtype": {
        "problemtype_data": [
          {
            "description": [
              {
                "lang": "eng",
                "value": "CWE-20"
              }
            ]
          }
        ]
      },
      "references": {
        "reference_data": [
          {
            "name": "20200924 Cisco IOS XE Wireless Controller Software for the Catalyst 9000 Family SNMP Trap Denial of Service Vulnerability",
            "refsource": "CISCO",
            "url": "https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-iosxe-ewlc-snmp-dos-wNkedg9K"
          }
        ]
      },
      "source": {
        "advisory": "cisco-sa-iosxe-ewlc-snmp-dos-wNkedg9K",
        "defect": [
          [
            "CSCvs56562"
          ]
        ],
        "discovery": "INTERNAL"
      }
    },
    "nvd.nist.gov": {
      "configurations": {
        "CVE_data_version": "4.0",
        "nodes": [
          {
            "children": [
              {
                "children": [],
                "cpe_match": [
                  {
                    "cpe23Uri": "cpe:2.3:a:cisco:ios_xe:16.12.1:*:*:*:*:*:*:*",
                    "cpe_name": [],
                    "vulnerable": true
                  }
                ],
                "operator": "OR"
              },
              {
                "children": [],
                "cpe_match": [
                  {
                    "cpe23Uri": "cpe:2.3:h:cisco:catalyst_9800-40:-:*:*:*:*:*:*:*",
                    "cpe_name": [],
                    "vulnerable": false
                  },
                  {
                    "cpe23Uri": "cpe:2.3:h:cisco:catalyst_9800-80:-:*:*:*:*:*:*:*",
                    "cpe_name": [],
                    "vulnerable": false
                  },
                  {
                    "cpe23Uri": "cpe:2.3:h:cisco:catalyst_9800-cl:-:*:*:*:*:*:*:*",
                    "cpe_name": [],
                    "vulnerable": false
                  },
                  {
                    "cpe23Uri": "cpe:2.3:h:cisco:catalyst_9800-l:-:*:*:*:*:*:*:*",
                    "cpe_name": [],
                    "vulnerable": false
                  },
                  {
                    "cpe23Uri": "cpe:2.3:h:cisco:catalyst_9800-l-c:-:*:*:*:*:*:*:*",
                    "cpe_name": [],
                    "vulnerable": false
                  },
                  {
                    "cpe23Uri": "cpe:2.3:h:cisco:catalyst_9800-l-f:-:*:*:*:*:*:*:*",
                    "cpe_name": [],
                    "vulnerable": false
                  }
                ],
                "operator": "OR"
              }
            ],
            "cpe_match": [],
            "operator": "AND"
          }
        ]
      },
      "cve": {
        "CVE_data_meta": {
          "ASSIGNER": "psirt@cisco.com",
          "ID": "CVE-2020-3390"
        },
        "data_format": "MITRE",
        "data_type": "CVE",
        "data_version": "4.0",
        "description": {
          "description_data": [
            {
              "lang": "en",
              "value": "A vulnerability in Simple Network Management Protocol (SNMP) trap generation for wireless clients of the Cisco IOS XE Wireless Controller Software for the Cisco Catalyst 9000 Family could allow an unauthenticated, adjacent attacker to cause the device to unexpectedly reload, causing a denial of service (DoS) condition on an affected device. The vulnerability is due to the lack of input validation of the information used to generate an SNMP trap in relation to a wireless client connection. An attacker could exploit this vulnerability by sending an 802.1x packet with crafted parameters during the wireless authentication setup phase of a connection. A successful exploit could allow the attacker to cause the device to reload, causing a DoS condition."
            }
          ]
        },
        "problemtype": {
          "problemtype_data": [
            {
              "description": [
                {
                  "lang": "en",
                  "value": "CWE-20"
                }
              ]
            }
          ]
        },
        "references": {
          "reference_data": [
            {
              "name": "20200924 Cisco IOS XE Wireless Controller Software for the Catalyst 9000 Family SNMP Trap Denial of Service Vulnerability",
              "refsource": "CISCO",
              "tags": [
                "Vendor Advisory"
              ],
              "url": "https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-iosxe-ewlc-snmp-dos-wNkedg9K"
            }
          ]
        }
      },
      "impact": {
        "baseMetricV2": {
          "acInsufInfo": false,
          "cvssV2": {
            "accessComplexity": "MEDIUM",
            "accessVector": "ADJACENT_NETWORK",
            "authentication": "NONE",
            "availabilityImpact": "COMPLETE",
            "baseScore": 5.7,
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "vectorString": "AV:A/AC:M/Au:N/C:N/I:N/A:C",
            "version": "2.0"
          },
          "exploitabilityScore": 5.5,
          "impactScore": 6.9,
          "obtainAllPrivilege": false,
          "obtainOtherPrivilege": false,
          "obtainUserPrivilege": false,
          "severity": "MEDIUM",
          "userInteractionRequired": false
        },
        "baseMetricV3": {
          "cvssV3": {
            "attackComplexity": "LOW",
            "attackVector": "ADJACENT_NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "CHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:C/C:N/I:N/A:H",
            "version": "3.1"
          },
          "exploitabilityScore": 2.8,
          "impactScore": 4.0
        }
      },
      "lastModifiedDate": "2021-08-06T18:58Z",
      "publishedDate": "2020-09-24T18:15Z"
    }
  }
}

{
  "affected": [],
  "aliases": [
    "CVE-2020-3390"
  ],
  "database_specific": {
    "cwe_ids": [
      "CWE-20"
    ],
    "github_reviewed": false,
    "github_reviewed_at": null,
    "nvd_published_at": "2020-09-24T18:15:00Z",
    "severity": "HIGH"
  },
  "details": "A vulnerability in Simple Network Management Protocol (SNMP) trap generation for wireless clients of the Cisco IOS XE Wireless Controller Software for the Cisco Catalyst 9000 Family could allow an unauthenticated, adjacent attacker to cause the device to unexpectedly reload, causing a denial of service (DoS) condition on an affected device. The vulnerability is due to the lack of input validation of the information used to generate an SNMP trap in relation to a wireless client connection. An attacker could exploit this vulnerability by sending an 802.1x packet with crafted parameters during the wireless authentication setup phase of a connection. A successful exploit could allow the attacker to cause the device to reload, causing a DoS condition.",
  "id": "GHSA-hwvf-grj2-9364",
  "modified": "2022-05-24T17:29:25Z",
  "published": "2022-05-24T17:29:25Z",
  "references": [
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2020-3390"
    },
    {
      "type": "WEB",
      "url": "https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-iosxe-ewlc-snmp-dos-wNkedg9K"
    }
  ],
  "schema_version": "1.4.0",
  "severity": []
}

{
  "document": {
    "acknowledgments": [
      {
        "summary": "This vulnerability was found during the resolution of a Cisco TAC support case."
      }
    ],
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "notes": [
      {
        "category": "summary",
        "text": "A vulnerability in Simple Network Management Protocol (SNMP) trap generation for wireless clients of the Cisco IOS XE Wireless Controller Software for the Cisco Catalyst 9000 Family could allow an unauthenticated, adjacent attacker to cause the device to unexpectedly reload, causing a denial of service (DoS) condition on an affected device.\r\n\r\nThe vulnerability is due to the lack of input validation of the information used to generate an SNMP trap in relation to a wireless client connection. An attacker could exploit this vulnerability by sending an 802.1x packet with crafted parameters during the wireless authentication setup phase of a connection. A successful exploit could allow the attacker to cause the device to reload, causing a DoS condition.\r\n\r\nCisco has released software updates that address this vulnerability. There are workarounds that address this vulnerability.\r\n\r\nThis advisory is available at the following link:\r\nhttps://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-iosxe-ewlc-snmp-dos-wNkedg9K [\"https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-iosxe-ewlc-snmp-dos-wNkedg9K\"]\r\n\r\nThis advisory is part of the September 24, 2020, release of the Cisco IOS and IOS XE Software Security Advisory Bundled Publication, which includes 25 Cisco Security Advisories that describe 34 vulnerabilities. For a complete list of the advisories and links to them, see Cisco Event Response: September 2020 Semiannual Cisco IOS and IOS XE Software Security Advisory Bundled Publication [\"https://sec.cloudapps.cisco.com/security/center/viewErp.x?alertId=ERP-74268\"].",
        "title": "Summary"
      },
      {
        "category": "general",
        "text": "This vulnerability affects Cisco IOS XE Wireless Controller Software for the Cisco Catalyst 9000 Family if the device is running a vulnerable release and is configured to send SNMP traps for 802.1x wireless connections. The following hardware platforms are vulnerable:\r\n\r\nCatalyst 9800 Embedded Wireless Controller for Catalyst 9300, 9400, and 9500 Series Switches\r\nCatalyst 9800 Series Wireless Controllers\r\nEmbedded Wireless Controller on Catalyst 9100 Access Points\r\n\r\nFor more information about which Cisco software releases are vulnerable, see the Fixed Software [\"#fs\"] section of this advisory.\r\n  Determine Whether a Device Is configured for SNMP trapflags for 802.1x\r\nTo determine whether any SNMP trapflags for 802.1x clients are enabled for a device, log in to the device and use the show running-config | include trapflags client dot11 command on the CLI to check for the presence of any command in the form trapflags client dot11 in the global configuration. If any output is returned then the device is vulnerable. This vulnerability is specific to the 802.1x SNMP traps, which are indicated by the dot11 in the CLI command output.\r\n\r\nThe following example shows the output of the show running-config | include trapflags client dot11 command for a device that has SNMP trapflags configured:\r\n\r\n\r\nRouter# show running-config | include trapflags client dot11\r\ntrapflags client dot11 assocfail\r\ntrapflags client dot11 associate\r\ntrapflags client dot11 authenticate\r\ntrapflags client dot11  authfail\r\ntrapflags client dot11 deauthenticate\r\ntrapflags client dot11 disassociate",
        "title": "Vulnerable Products"
      },
      {
        "category": "general",
        "text": "Only products listed in the Vulnerable Products [\"#vp\"] section of this advisory are known to be affected by this vulnerability.\r\n\r\nCisco has confirmed that this vulnerability does not affect the following Cisco software:\r\n\r\nIOS Software\r\nIOS XR Software\r\nNX-OS Software\r\nWLC Software",
        "title": "Products Confirmed Not Vulnerable"
      },
      {
        "category": "general",
        "text": "There is a workaround that addresses this vulnerability.\r\n\r\nThe workaround for this vulnerability is to remove all commands from the running configuration of the form trapflags client dot11. These commands cause an SNMP trap to be generated for specific states of the wireless connection to the device, and that SNMP trap generation function causes the device to be vulnerable. If the wireless network does not require SNMP traps, it is considered a valid workaround to remove these commands.",
        "title": "Workarounds"
      },
      {
        "category": "general",
        "text": "Cisco has released free software updates that address the vulnerability described in this advisory. Customers may only install and expect support for software versions and feature sets for which they have purchased a license. By installing, downloading, accessing, or otherwise using such software upgrades, customers agree to follow the terms of the Cisco software license:\r\nhttps://www.cisco.com/c/en/us/products/end-user-license-agreement.html [\"https://www.cisco.com/c/en/us/products/end-user-license-agreement.html\"]\r\n\r\nAdditionally, customers may only download software for which they have a valid license, procured from Cisco directly, or through a Cisco authorized reseller or partner. In most cases this will be a maintenance upgrade to software that was previously purchased. Free security software updates do not entitle customers to a new software license, additional software feature sets, or major revision upgrades.\r\n\r\nWhen considering software upgrades [\"https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#fixes\"], customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories page [\"https://www.cisco.com/go/psirt\"], to determine exposure and a complete upgrade solution.\r\n\r\nIn all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.\r\n  Customers Without Service Contracts\r\nCustomers who purchase directly from Cisco but do not hold a Cisco service contract and customers who make purchases through third-party vendors but are unsuccessful in obtaining fixed software through their point of sale should obtain upgrades by contacting the Cisco TAC: https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html [\"https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html\"]\r\n\r\nCustomers should have the product serial number available and be prepared to provide the URL of this advisory as evidence of entitlement to a free upgrade.\r\n      Cisco IOS and IOS XE Software\r\nTo help customers determine their exposure to vulnerabilities in Cisco IOS and IOS XE Software, Cisco provides the Cisco Software Checker [\"https://sec.cloudapps.cisco.com/security/center/softwarechecker.x\"] to identify any Cisco Security Advisories that impact a specific software release and the earliest release that fixes the vulnerabilities described in each advisory (\u201cFirst Fixed\u201d). If applicable, the tool also returns the earliest release that fixes all the vulnerabilities described in all the advisories identified (\u201cCombined First Fixed\u201d).\r\n\r\nCustomers can use the Cisco Software Checker [\"https://sec.cloudapps.cisco.com/security/center/softwarechecker.x\"] to search advisories in the following ways:\r\n\r\nChoose the software and one or more releases\r\nUpload a .txt file that includes a list of specific releases\r\nEnter the output of the show version command\r\n\r\nAfter initiating a search, customers can customize the search to include all Cisco Security Advisories, a specific advisory, or all advisories in the most recent bundled publication.\r\n\r\nCustomers can also use the following form to determine whether a release is affected by any Cisco Security Advisory by entering a Cisco IOS or IOS XE Software release\u2014for example, 15.1(4)M2 or 3.13.8S:\r\n\r\n\r\n\r\nBy default, the Cisco Software Checker [\"https://sec.cloudapps.cisco.com/security/center/softwarechecker.x\"] includes results only for vulnerabilities that have a Critical or High Security Impact Rating (SIR). To include results for Medium SIR vulnerabilities, customers can use the Cisco Software Checker on Cisco.com and check the Medium check box in the drop-down list under Impact Rating when customizing a search.\r\n\r\nFor a mapping of Cisco IOS XE Software releases to Cisco IOS Software releases, refer to the Cisco IOS XE 2 Release Notes [\"https://www.cisco.com/c/en/us/td/docs/ios/ios_xe/2/release/notes/rnasr21/rnasr21_gen.html#wp3000032\"], Cisco IOS XE 3S Release Notes [\"https://www.cisco.com/c/en/us/td/docs/ios/ios_xe/3/release/notes/asr1k_rn_3s_rel_notes/asr1k_rn_3s_sys_req.html#wp3069754\"], or Cisco IOS XE 3SG Release Notes [\"https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/release/note/OL_24726.html#pgfId-2570252\"], depending on the Cisco IOS XE Software release.",
        "title": "Fixed Software"
      },
      {
        "category": "general",
        "text": "To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy [\"https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html\"]. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.",
        "title": "Vulnerability Policy"
      },
      {
        "category": "general",
        "text": "The Cisco Product Security Incident Response Team (PSIRT) is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory.",
        "title": "Exploitation and Public Announcements"
      },
      {
        "category": "general",
        "text": "This vulnerability was found during the resolution of a Cisco TAC support case.",
        "title": "Source"
      },
      {
        "category": "legal_disclaimer",
        "text": "THIS DOCUMENT IS PROVIDED ON AN \"AS IS\" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.\r\n\r\nA standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products.",
        "title": "Legal Disclaimer"
      }
    ],
    "publisher": {
      "category": "vendor",
      "contact_details": "Emergency Support:\r\n+1 877 228 7302 (toll-free within North America)\r\n+1 408 525 6532 (International direct-dial)\r\nNon-emergency Support:\r\nEmail: psirt@cisco.com\r\nSupport requests that are received via e-mail are typically acknowledged within 48 hours.",
      "issuing_authority": "Cisco product security incident response is the responsibility of the Cisco Product Security Incident Response Team (PSIRT). The Cisco PSIRT is a dedicated, global team that manages the receipt, investigation, and public reporting of security vulnerability information that is related to Cisco products and networks. The on-call Cisco PSIRT works 24x7 with Cisco customers, independent security researchers, consultants, industry organizations, and other vendors to identify possible security issues with Cisco products and networks.\r\nMore information can be found in Cisco Security Vulnerability Policy available at https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html",
      "name": "Cisco",
      "namespace": "https://wwww.cisco.com"
    },
    "references": [
      {
        "category": "self",
        "summary": "Cisco IOS XE Wireless Controller Software for the Catalyst 9000 Family SNMP Trap Denial of Service Vulnerability",
        "url": "https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-iosxe-ewlc-snmp-dos-wNkedg9K"
      },
      {
        "category": "external",
        "summary": "Cisco Event Response: September 2020 Semiannual Cisco IOS and IOS XE Software Security Advisory Bundled Publication",
        "url": "https://sec.cloudapps.cisco.com/security/center/viewErp.x?alertId=ERP-74268"
      },
      {
        "category": "external",
        "summary": "Cisco Security Vulnerability Policy",
        "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html"
      },
      {
        "category": "external",
        "summary": "https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-iosxe-ewlc-snmp-dos-wNkedg9K",
        "url": "https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-iosxe-ewlc-snmp-dos-wNkedg9K"
      },
      {
        "category": "external",
        "summary": "Cisco\u0026nbsp;Event Response: September 2020 Semiannual Cisco\u0026nbsp;IOS and IOS XE Software Security Advisory Bundled Publication",
        "url": "https://sec.cloudapps.cisco.com/security/center/viewErp.x?alertId=ERP-74268"
      },
      {
        "category": "external",
        "summary": "https://www.cisco.com/c/en/us/products/end-user-license-agreement.html",
        "url": "https://www.cisco.com/c/en/us/products/end-user-license-agreement.html"
      },
      {
        "category": "external",
        "summary": "considering software upgrades",
        "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#fixes"
      },
      {
        "category": "external",
        "summary": "Cisco\u0026nbsp;Security Advisories page",
        "url": "https://www.cisco.com/go/psirt"
      },
      {
        "category": "external",
        "summary": "https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html",
        "url": "https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html"
      },
      {
        "category": "external",
        "summary": "Cisco\u0026nbsp;Software Checker",
        "url": "https://sec.cloudapps.cisco.com/security/center/softwarechecker.x"
      },
      {
        "category": "external",
        "summary": "Cisco\u0026nbsp;Software Checker",
        "url": "https://sec.cloudapps.cisco.com/security/center/softwarechecker.x"
      },
      {
        "category": "external",
        "summary": "Cisco\u0026nbsp;Software Checker",
        "url": "https://sec.cloudapps.cisco.com/security/center/softwarechecker.x"
      },
      {
        "category": "external",
        "summary": "Cisco\u0026nbsp;IOS XE 2 Release Notes",
        "url": "https://www.cisco.com/c/en/us/td/docs/ios/ios_xe/2/release/notes/rnasr21/rnasr21_gen.html#wp3000032"
      },
      {
        "category": "external",
        "summary": "Cisco\u0026nbsp;IOS XE 3S Release Notes",
        "url": "https://www.cisco.com/c/en/us/td/docs/ios/ios_xe/3/release/notes/asr1k_rn_3s_rel_notes/asr1k_rn_3s_sys_req.html#wp3069754"
      },
      {
        "category": "external",
        "summary": "Cisco\u0026nbsp;IOS XE 3SG Release Notes",
        "url": "https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/release/note/OL_24726.html#pgfId-2570252"
      },
      {
        "category": "external",
        "summary": "Security Vulnerability Policy",
        "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html"
      }
    ],
    "title": "Cisco IOS XE Wireless Controller Software for the Catalyst 9000 Family SNMP Trap Denial of Service Vulnerability",
    "tracking": {
      "current_release_date": "2020-09-24T16:00:00+00:00",
      "generator": {
        "date": "2022-10-22T03:07:13+00:00",
        "engine": {
          "name": "TVCE"
        }
      },
      "id": "cisco-sa-iosxe-ewlc-snmp-dos-wNkedg9K",
      "initial_release_date": "2020-09-24T16:00:00+00:00",
      "revision_history": [
        {
          "date": "2020-09-23T21:56:45+00:00",
          "number": "1.0.0",
          "summary": "Initial public release."
        }
      ],
      "status": "final",
      "version": "1.0.0"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "branches": [
                  {
                    "category": "service_pack",
                    "name": "16.10.1",
                    "product": {
                      "name": "16.10.1",
                      "product_id": "CSAFPID-225858"
                    }
                  },
                  {
                    "category": "service_pack",
                    "name": "16.10.1s",
                    "product": {
                      "name": "16.10.1s",
                      "product_id": "CSAFPID-252913"
                    }
                  },
                  {
                    "category": "service_pack",
                    "name": "16.10.1e",
                    "product": {
                      "name": "16.10.1e",
                      "product_id": "CSAFPID-257955"
                    }
                  }
                ],
                "category": "product_version",
                "name": "16.10"
              },
              {
                "branches": [
                  {
                    "category": "service_pack",
                    "name": "16.11.1",
                    "product": {
                      "name": "16.11.1",
                      "product_id": "CSAFPID-227918"
                    }
                  },
                  {
                    "category": "service_pack",
                    "name": "16.11.1a",
                    "product": {
                      "name": "16.11.1a",
                      "product_id": "CSAFPID-252271"
                    }
                  },
                  {
                    "category": "service_pack",
                    "name": "16.11.1b",
                    "product": {
                      "name": "16.11.1b",
                      "product_id": "CSAFPID-260741"
                    }
                  },
                  {
                    "category": "service_pack",
                    "name": "16.11.2",
                    "product": {
                      "name": "16.11.2",
                      "product_id": "CSAFPID-261240"
                    }
                  },
                  {
                    "category": "service_pack",
                    "name": "16.11.1c",
                    "product": {
                      "name": "16.11.1c",
                      "product_id": "CSAFPID-264096"
                    }
                  }
                ],
                "category": "product_version",
                "name": "16.11"
              },
              {
                "branches": [
                  {
                    "category": "service_pack",
                    "name": "16.12.1",
                    "product": {
                      "name": "16.12.1",
                      "product_id": "CSAFPID-227920"
                    }
                  },
                  {
                    "category": "service_pack",
                    "name": "16.12.1s",
                    "product": {
                      "name": "16.12.1s",
                      "product_id": "CSAFPID-265735"
                    }
                  },
                  {
                    "category": "service_pack",
                    "name": "16.12.2s",
                    "product": {
                      "name": "16.12.2s",
                      "product_id": "CSAFPID-273509"
                    }
                  },
                  {
                    "category": "service_pack",
                    "name": "16.12.1t",
                    "product": {
                      "name": "16.12.1t",
                      "product_id": "CSAFPID-274832"
                    }
                  },
                  {
                    "category": "service_pack",
                    "name": "16.12.2t",
                    "product": {
                      "name": "16.12.2t",
                      "product_id": "CSAFPID-275538"
                    }
                  }
                ],
                "category": "product_version",
                "name": "16.12"
              },
              {
                "branches": [
                  {
                    "category": "service_pack",
                    "name": "17.1.1",
                    "product": {
                      "name": "17.1.1",
                      "product_id": "CSAFPID-245377"
                    }
                  }
                ],
                "category": "product_version",
                "name": "17.1"
              }
            ],
            "category": "product_family",
            "name": "Cisco IOS XE Software"
          },
          {
            "category": "product_family",
            "name": "Cisco IOS XE Software",
            "product": {
              "name": "Cisco IOS XE Software ",
              "product_id": "CSAFPID-93036"
            }
          }
        ],
        "category": "vendor",
        "name": "Cisco"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2020-3390",
      "ids": [
        {
          "system_name": "Cisco Bug ID",
          "text": "CSCvs56562"
        }
      ],
      "notes": [
        {
          "category": "other",
          "text": "Complete.",
          "title": "Affected Product Comprehensiveness"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-225858",
          "CSAFPID-227918",
          "CSAFPID-227920",
          "CSAFPID-245377",
          "CSAFPID-252271",
          "CSAFPID-252913",
          "CSAFPID-257955",
          "CSAFPID-260741",
          "CSAFPID-261240",
          "CSAFPID-264096",
          "CSAFPID-265735",
          "CSAFPID-273509",
          "CSAFPID-274832",
          "CSAFPID-275538",
          "CSAFPID-93036"
        ]
      },
      "release_date": "2020-09-24T16:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Cisco has released software updates that address this vulnerability.",
          "product_ids": [
            "CSAFPID-225858",
            "CSAFPID-227918",
            "CSAFPID-227920",
            "CSAFPID-245377",
            "CSAFPID-252271",
            "CSAFPID-252913",
            "CSAFPID-257955",
            "CSAFPID-260741",
            "CSAFPID-261240",
            "CSAFPID-264096",
            "CSAFPID-265735",
            "CSAFPID-273509",
            "CSAFPID-274832",
            "CSAFPID-275538",
            "CSAFPID-93036"
          ],
          "url": "https://software.cisco.com"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.0/AV:A/AC:L/PR:N/UI:N/S:C/C:N/I:N/A:H",
            "version": "3.0"
          },
          "products": [
            "CSAFPID-225858",
            "CSAFPID-227918",
            "CSAFPID-227920",
            "CSAFPID-245377",
            "CSAFPID-252271",
            "CSAFPID-252913",
            "CSAFPID-257955",
            "CSAFPID-260741",
            "CSAFPID-261240",
            "CSAFPID-264096",
            "CSAFPID-265735",
            "CSAFPID-273509",
            "CSAFPID-274832",
            "CSAFPID-275538",
            "CSAFPID-93036"
          ]
        }
      ],
      "title": "Cisco IOS XE Software Catalyst 9800 Series Wireless Controllers SNMP Trap Denial of Service Vulnerability"
    }
  ]
}