{
  "document": {
    "acknowledgments": [
      {
        "organization": "Siemens ProductCERT",
        "summary": "reporting these vulnerabilities to CISA."
      }
    ],
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Disclosure is not limited",
      "tlp": {
        "label": "WHITE",
        "url": "https://us-cert.cisa.gov/tlp/"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "Siemens has released new versions for the affected products and recommends to update to the latest versions.",
        "title": "Summary"
      },
      {
        "category": "general",
        "text": "As a general security measure, Siemens strongly recommends to protect network access to devices with appropriate mechanisms. In order to operate the devices in a protected IT environment, Siemens recommends to configure the environment according to Siemens\u0027 operational guidelines for Industrial Security (Download: \nhttps://www.siemens.com/cert/operational-guidelines-industrial-security), and to follow the recommendations in the product manuals.\nAdditional information on Industrial Security by Siemens can be found at: https://www.siemens.com/industrialsecurity",
        "title": "General Recommendations"
      },
      {
        "category": "general",
        "text": "For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories",
        "title": "Additional Resources"
      },
      {
        "category": "legal_disclaimer",
        "text": "Siemens Security Advisories are subject to the terms and conditions contained in Siemens\u0027 underlying license terms or other applicable agreements previously agreed to with Siemens (hereinafter \"License Terms\"). To the extent applicable to information, software or documentation made available in or through a Siemens Security Advisory, the Terms of Use of Siemens\u0027 Global Website (https://www.siemens.com/terms_of_use, hereinafter \"Terms of Use\"), in particular Sections 8-10 of the Terms of Use, shall apply additionally. In case of conflicts, the License Terms shall prevail over the Terms of Use.",
        "title": "Terms of Use"
      },
      {
        "category": "legal_disclaimer",
        "text": "All information products included in https://us-cert.cisa.gov/ics are provided \"as is\" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see https://us-cert.cisa.gov/tlp/.",
        "title": "Legal Notice"
      },
      {
        "category": "other",
        "text": "This CISA CSAF advisory was converted from Siemens ProductCERT\u0027s CSAF advisory.",
        "title": "Advisory Conversion Disclaimer"
      },
      {
        "category": "other",
        "text": "Multiple",
        "title": "Critical infrastructure sectors"
      },
      {
        "category": "other",
        "text": "Worldwide",
        "title": "Countries/areas deployed"
      },
      {
        "category": "other",
        "text": "Germany",
        "title": "Company headquarters location"
      },
      {
        "category": "general",
        "text": "CISA recommends users take defensive measures to minimize the exploitation risk of this vulnerability.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Minimize network exposure for all control system devices and/or systems, and ensure they are not accessible from the internet.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Locate control system networks and remote devices behind firewalls and isolate them from business networks.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "When remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most recent version available. Also recognize VPN is only as secure as its connected devices.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets. Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.",
        "title": "Recommended Practices"
      }
    ],
    "publisher": {
      "category": "other",
      "contact_details": "central@cisa.dhs.gov",
      "name": "CISA",
      "namespace": "https://www.cisa.gov/"
    },
    "references": [
      {
        "category": "self",
        "summary": "SSA-879734: Multiple Vulnerabilities in SCALANCE XM-400/XR-500 before V6.6.1 - CSAF Version",
        "url": "https://cert-portal.siemens.com/productcert/csaf/ssa-879734.json"
      },
      {
        "category": "self",
        "summary": "SSA-879734: Multiple Vulnerabilities in SCALANCE XM-400/XR-500 before V6.6.1 - HTML Version",
        "url": "https://cert-portal.siemens.com/productcert/html/ssa-879734.html"
      },
      {
        "category": "self",
        "summary": "SSA-879734: Multiple Vulnerabilities in SCALANCE XM-400/XR-500 before V6.6.1 - PDF Version",
        "url": "https://cert-portal.siemens.com/productcert/pdf/ssa-879734.pdf"
      },
      {
        "category": "self",
        "summary": "SSA-879734: Multiple Vulnerabilities in SCALANCE XM-400/XR-500 before V6.6.1 - TXT Version",
        "url": "https://cert-portal.siemens.com/productcert/txt/ssa-879734.txt"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-24-165-11 JSON",
        "url": "https://raw.githubusercontent.com/cisagov/CSAF/develop/csaf_files/OT/white/2024/icsa-24-165-11.json"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-24-165-11 - Web Version",
        "url": "https://www.cisa.gov/news-events/ics-advisories/icsa-24-165-11"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/alerts/ICS-ALERT-10-301-01"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/resources-tools/resources/ics-recommended-practices"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/topics/industrial-control-systems"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/sites/default/files/publications/Cybersecurity_Best_Practices_for_Industrial_Control_Systems.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/tips/ICS-TIP-12-146-01B"
      }
    ],
    "title": "Siemens SCALANCE XM-400, XR-500",
    "tracking": {
      "current_release_date": "2024-06-11T00:00:00.000000Z",
      "generator": {
        "engine": {
          "name": "CISA CSAF Generator",
          "version": "1.0.0"
        }
      },
      "id": "ICSA-24-165-11",
      "initial_release_date": "2024-06-11T00:00:00.000000Z",
      "revision_history": [
        {
          "date": "2024-06-11T00:00:00.000000Z",
          "legacy_version": "1.0",
          "number": "1",
          "summary": "Publication Date"
        }
      ],
      "status": "final",
      "version": "1"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV6.6.1",
                "product": {
                  "name": "SCALANCE XM408-4C (6GK5408-4GP00-2AM2)",
                  "product_id": "CSAFPID-0001",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5408-4GP00-2AM2"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE XM408-4C (6GK5408-4GP00-2AM2)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV6.6.1",
                "product": {
                  "name": "SCALANCE XM408-4C (L3 int.) (6GK5408-4GQ00-2AM2)",
                  "product_id": "CSAFPID-0002",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5408-4GQ00-2AM2"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE XM408-4C (L3 int.) (6GK5408-4GQ00-2AM2)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV6.6.1",
                "product": {
                  "name": "SCALANCE XM408-8C (6GK5408-8GS00-2AM2)",
                  "product_id": "CSAFPID-0003",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5408-8GS00-2AM2"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE XM408-8C (6GK5408-8GS00-2AM2)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV6.6.1",
                "product": {
                  "name": "SCALANCE XM408-8C (L3 int.) (6GK5408-8GR00-2AM2)",
                  "product_id": "CSAFPID-0004",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5408-8GR00-2AM2"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE XM408-8C (L3 int.) (6GK5408-8GR00-2AM2)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV6.6.1",
                "product": {
                  "name": "SCALANCE XM416-4C (6GK5416-4GS00-2AM2)",
                  "product_id": "CSAFPID-0005",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5416-4GS00-2AM2"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE XM416-4C (6GK5416-4GS00-2AM2)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV6.6.1",
                "product": {
                  "name": "SCALANCE XM416-4C (L3 int.) (6GK5416-4GR00-2AM2)",
                  "product_id": "CSAFPID-0006",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5416-4GR00-2AM2"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE XM416-4C (L3 int.) (6GK5416-4GR00-2AM2)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV6.6.1",
                "product": {
                  "name": "SCALANCE XR524-8C, 1x230V (6GK5524-8GS00-3AR2)",
                  "product_id": "CSAFPID-0007",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5524-8GS00-3AR2"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE XR524-8C, 1x230V (6GK5524-8GS00-3AR2)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV6.6.1",
                "product": {
                  "name": "SCALANCE XR524-8C, 1x230V (L3 int.) (6GK5524-8GR00-3AR2)",
                  "product_id": "CSAFPID-0008",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5524-8GR00-3AR2"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE XR524-8C, 1x230V (L3 int.) (6GK5524-8GR00-3AR2)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV6.6.1",
                "product": {
                  "name": "SCALANCE XR524-8C, 2x230V (6GK5524-8GS00-4AR2)",
                  "product_id": "CSAFPID-0009",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5524-8GS00-4AR2"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE XR524-8C, 2x230V (6GK5524-8GS00-4AR2)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV6.6.1",
                "product": {
                  "name": "SCALANCE XR524-8C, 2x230V (L3 int.) (6GK5524-8GR00-4AR2)",
                  "product_id": "CSAFPID-0010",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5524-8GR00-4AR2"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE XR524-8C, 2x230V (L3 int.) (6GK5524-8GR00-4AR2)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV6.6.1",
                "product": {
                  "name": "SCALANCE XR524-8C, 24V (6GK5524-8GS00-2AR2)",
                  "product_id": "CSAFPID-0011",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5524-8GS00-2AR2"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE XR524-8C, 24V (6GK5524-8GS00-2AR2)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV6.6.1",
                "product": {
                  "name": "SCALANCE XR524-8C, 24V (L3 int.) (6GK5524-8GR00-2AR2)",
                  "product_id": "CSAFPID-0012",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5524-8GR00-2AR2"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE XR524-8C, 24V (L3 int.) (6GK5524-8GR00-2AR2)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV6.6.1",
                "product": {
                  "name": "SCALANCE XR526-8C, 1x230V (6GK5526-8GS00-3AR2)",
                  "product_id": "CSAFPID-0013",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5526-8GS00-3AR2"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE XR526-8C, 1x230V (6GK5526-8GS00-3AR2)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV6.6.1",
                "product": {
                  "name": "SCALANCE XR526-8C, 1x230V (L3 int.) (6GK5526-8GR00-3AR2)",
                  "product_id": "CSAFPID-0014",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5526-8GR00-3AR2"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE XR526-8C, 1x230V (L3 int.) (6GK5526-8GR00-3AR2)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV6.6.1",
                "product": {
                  "name": "SCALANCE XR526-8C, 2x230V (6GK5526-8GS00-4AR2)",
                  "product_id": "CSAFPID-0015",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5526-8GS00-4AR2"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE XR526-8C, 2x230V (6GK5526-8GS00-4AR2)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV6.6.1",
                "product": {
                  "name": "SCALANCE XR526-8C, 2x230V (L3 int.) (6GK5526-8GR00-4AR2)",
                  "product_id": "CSAFPID-0016",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5526-8GR00-4AR2"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE XR526-8C, 2x230V (L3 int.) (6GK5526-8GR00-4AR2)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV6.6.1",
                "product": {
                  "name": "SCALANCE XR526-8C, 24V (6GK5526-8GS00-2AR2)",
                  "product_id": "CSAFPID-0017",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5526-8GS00-2AR2"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE XR526-8C, 24V (6GK5526-8GS00-2AR2)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV6.6.1",
                "product": {
                  "name": "SCALANCE XR526-8C, 24V (L3 int.) (6GK5526-8GR00-2AR2)",
                  "product_id": "CSAFPID-0018",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5526-8GR00-2AR2"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE XR526-8C, 24V (L3 int.) (6GK5526-8GR00-2AR2)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV6.6.1",
                "product": {
                  "name": "SCALANCE XR528-6M (2HR2) (6GK5528-0AA00-2HR2)",
                  "product_id": "CSAFPID-0019",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5528-0AA00-2HR2"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE XR528-6M (2HR2) (6GK5528-0AA00-2HR2)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV6.6.1",
                "product": {
                  "name": "SCALANCE XR528-6M (2HR2, L3 int.) (6GK5528-0AR00-2HR2)",
                  "product_id": "CSAFPID-0020",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5528-0AR00-2HR2"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE XR528-6M (2HR2, L3 int.) (6GK5528-0AR00-2HR2)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV6.6.1",
                "product": {
                  "name": "SCALANCE XR528-6M (6GK5528-0AA00-2AR2)",
                  "product_id": "CSAFPID-0021",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5528-0AA00-2AR2"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE XR528-6M (6GK5528-0AA00-2AR2)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV6.6.1",
                "product": {
                  "name": "SCALANCE XR528-6M (L3 int.) (6GK5528-0AR00-2AR2)",
                  "product_id": "CSAFPID-0022",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5528-0AR00-2AR2"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE XR528-6M (L3 int.) (6GK5528-0AR00-2AR2)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV6.6.1",
                "product": {
                  "name": "SCALANCE XR552-12M (2HR2) (6GK5552-0AA00-2HR2)",
                  "product_id": "CSAFPID-0023",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5552-0AA00-2HR2"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE XR552-12M (2HR2) (6GK5552-0AA00-2HR2)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV6.6.1",
                "product": {
                  "name": "SCALANCE XR552-12M (2HR2) (6GK5552-0AR00-2HR2)",
                  "product_id": "CSAFPID-0024",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5552-0AR00-2HR2"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE XR552-12M (2HR2) (6GK5552-0AR00-2HR2)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV6.6.1",
                "product": {
                  "name": "SCALANCE XR552-12M (2HR2, L3 int.) (6GK5552-0AR00-2AR2)",
                  "product_id": "CSAFPID-0025",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5552-0AR00-2AR2"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE XR552-12M (2HR2, L3 int.) (6GK5552-0AR00-2AR2)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV6.6.1",
                "product": {
                  "name": "SCALANCE XR552-12M (6GK5552-0AA00-2AR2)",
                  "product_id": "CSAFPID-0026",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5552-0AA00-2AR2"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE XR552-12M (6GK5552-0AA00-2AR2)"
          }
        ],
        "category": "vendor",
        "name": "Siemens"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2022-2097",
      "cwe": {
        "id": "CWE-326",
        "name": "Inadequate Encryption Strength"
      },
      "notes": [
        {
          "category": "summary",
          "text": "AES OCB mode for 32-bit x86 platforms using the AES-NI assembly optimised implementation will not encrypt the entirety of the data under some circumstances. This could reveal sixteen bytes of data that was preexisting in the memory that wasn\u0027t written. In the special case of \"in place\" encryption, sixteen bytes of the plaintext would be revealed. Since OpenSSL does not support OCB based cipher suites for TLS and DTLS, they are both unaffected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0021",
          "CSAFPID-0020",
          "CSAFPID-0019",
          "CSAFPID-0022",
          "CSAFPID-0026",
          "CSAFPID-0025",
          "CSAFPID-0023",
          "CSAFPID-0024"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V6.6.1 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0021",
            "CSAFPID-0020",
            "CSAFPID-0019",
            "CSAFPID-0022",
            "CSAFPID-0026",
            "CSAFPID-0025",
            "CSAFPID-0023",
            "CSAFPID-0024"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955252/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0021",
            "CSAFPID-0020",
            "CSAFPID-0019",
            "CSAFPID-0022",
            "CSAFPID-0026",
            "CSAFPID-0025",
            "CSAFPID-0023",
            "CSAFPID-0024"
          ]
        }
      ],
      "title": "CVE-2022-2097"
    },
    {
      "cve": "CVE-2022-4304",
      "cwe": {
        "id": "CWE-326",
        "name": "Inadequate Encryption Strength"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A timing based side channel exists in the OpenSSL RSA Decryption implementation which could be sufficient to recover a plaintext across a network in a Bleichenbacher style attack. To achieve a successful decryption an attacker would have to be able to send a very large number of trial messages for decryption. The vulnerability affects all RSA padding modes: PKCS#1 v1.5, RSA-OEAP and RSASVE. For example, in a TLS connection, RSA is commonly used by a client to send an encrypted pre-master secret to the server. An attacker that had observed a genuine connection between a client and a server could use this flaw to send trial messages to the server and record the time taken to process them. After a sufficiently large number of messages the attacker could recover the pre-master secret used for the original connection and thus be able to decrypt the application data sent over that connection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0021",
          "CSAFPID-0020",
          "CSAFPID-0019",
          "CSAFPID-0022",
          "CSAFPID-0026",
          "CSAFPID-0025",
          "CSAFPID-0023",
          "CSAFPID-0024"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V6.6.1 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0021",
            "CSAFPID-0020",
            "CSAFPID-0019",
            "CSAFPID-0022",
            "CSAFPID-0026",
            "CSAFPID-0025",
            "CSAFPID-0023",
            "CSAFPID-0024"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955252/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0021",
            "CSAFPID-0020",
            "CSAFPID-0019",
            "CSAFPID-0022",
            "CSAFPID-0026",
            "CSAFPID-0025",
            "CSAFPID-0023",
            "CSAFPID-0024"
          ]
        }
      ],
      "title": "CVE-2022-4304"
    },
    {
      "cve": "CVE-2022-4450",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The function PEM_read_bio_ex() reads a PEM file from a BIO and parses and decodes the \"name\" (e.g. \"CERTIFICATE\"), any header data and the payload data. If the function succeeds then the \"name_out\", \"header\" and \"data\" arguments are populated with pointers to buffers containing the relevant decoded data. The caller is responsible for freeing those buffers. It is possible to construct a PEM file that results in 0 bytes of payload data. In this case PEM_read_bio_ex() will return a failure code but will populate the header argument with a pointer to a buffer that has already been freed. If the caller also frees this buffer then a double free will occur. This will most likely lead to a crash. This could be exploited by an attacker who has the ability to supply malicious PEM files for parsing to achieve a denial of service attack. The functions PEM_read_bio() and PEM_read() are simple wrappers around PEM_read_bio_ex() and therefore these functions are also directly affected. These functions are also called indirectly by a number of other OpenSSL functions including PEM_X509_INFO_read_bio_ex() and SSL_CTX_use_serverinfo_file() which are also vulnerable. Some OpenSSL internal uses of these functions are not vulnerable because the caller does not free the header argument if PEM_read_bio_ex() returns a failure code. These locations include the PEM_read_bio_TYPE() functions as well as the decoders introduced in OpenSSL 3.0. The OpenSSL asn1parse command line application is also impacted by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0021",
          "CSAFPID-0020",
          "CSAFPID-0019",
          "CSAFPID-0022",
          "CSAFPID-0026",
          "CSAFPID-0025",
          "CSAFPID-0023",
          "CSAFPID-0024"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V6.6.1 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0021",
            "CSAFPID-0020",
            "CSAFPID-0019",
            "CSAFPID-0022",
            "CSAFPID-0026",
            "CSAFPID-0025",
            "CSAFPID-0023",
            "CSAFPID-0024"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955252/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0021",
            "CSAFPID-0020",
            "CSAFPID-0019",
            "CSAFPID-0022",
            "CSAFPID-0026",
            "CSAFPID-0025",
            "CSAFPID-0023",
            "CSAFPID-0024"
          ]
        }
      ],
      "title": "CVE-2022-4450"
    },
    {
      "cve": "CVE-2023-0215",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The public API function BIO_new_NDEF is a helper function used for streaming ASN.1 data via a BIO. It is primarily used internally to OpenSSL to support the SMIME, CMS and PKCS7 streaming capabilities, but may also be called directly by end user applications. The function receives a BIO from the caller, prepends a new BIO_f_asn1 filter BIO onto the front of it to form a BIO chain, and then returns the new head of the BIO chain to the caller. Under certain conditions, for example if a CMS recipient public key is invalid, the new filter BIO is freed and the function returns a NULL result indicating a failure. However, in this case, the BIO chain is not properly cleaned up and the BIO passed by the caller still retains internal pointers to the previously freed filter BIO. If the caller then goes on to call BIO_pop() on the BIO then a use-after-free will occur. This will most likely result in a crash. This scenario occurs directly in the internal function B64_write_ASN1() which may cause BIO_new_NDEF() to be called and will subsequently call BIO_pop() on the BIO. This internal function is in turn called by the public API functions PEM_write_bio_ASN1_stream, PEM_write_bio_CMS_stream, PEM_write_bio_PKCS7_stream, SMIME_write_ASN1, SMIME_write_CMS and SMIME_write_PKCS7. Other public API functions that may be impacted by this include i2d_ASN1_bio_stream, BIO_new_CMS, BIO_new_PKCS7, i2d_CMS_bio_stream and i2d_PKCS7_bio_stream. The OpenSSL cms and smime command line applications are similarly affected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0021",
          "CSAFPID-0020",
          "CSAFPID-0019",
          "CSAFPID-0022",
          "CSAFPID-0026",
          "CSAFPID-0025",
          "CSAFPID-0023",
          "CSAFPID-0024"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V6.6.1 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0021",
            "CSAFPID-0020",
            "CSAFPID-0019",
            "CSAFPID-0022",
            "CSAFPID-0026",
            "CSAFPID-0025",
            "CSAFPID-0023",
            "CSAFPID-0024"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955252/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0021",
            "CSAFPID-0020",
            "CSAFPID-0019",
            "CSAFPID-0022",
            "CSAFPID-0026",
            "CSAFPID-0025",
            "CSAFPID-0023",
            "CSAFPID-0024"
          ]
        }
      ],
      "title": "CVE-2023-0215"
    },
    {
      "cve": "CVE-2023-0286",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a type confusion vulnerability relating to X.400 address processing inside an X.509 GeneralName. X.400 addresses were parsed as an ASN1_STRING but the public structure definition for GENERAL_NAME incorrectly specified the type of the x400Address field as ASN1_TYPE. This field is subsequently interpreted by the OpenSSL function GENERAL_NAME_cmp as an ASN1_TYPE rather than an ASN1_STRING. When CRL checking is enabled (i.e. the application sets the X509_V_FLAG_CRL_CHECK flag), this vulnerability may allow an attacker to pass arbitrary pointers to a memcmp call, enabling them to read memory contents or enact a denial of service. In most cases, the attack requires the attacker to provide both the certificate chain and CRL, neither of which need to have a valid signature. If the attacker only controls one of these inputs, the other input must already contain an X.400 address as a CRL distribution point, which is uncommon. As such, this vulnerability is most likely to only affect applications which have implemented their own functionality for retrieving CRLs over a network.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0021",
          "CSAFPID-0020",
          "CSAFPID-0019",
          "CSAFPID-0022",
          "CSAFPID-0026",
          "CSAFPID-0025",
          "CSAFPID-0023",
          "CSAFPID-0024"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V6.6.1 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0021",
            "CSAFPID-0020",
            "CSAFPID-0019",
            "CSAFPID-0022",
            "CSAFPID-0026",
            "CSAFPID-0025",
            "CSAFPID-0023",
            "CSAFPID-0024"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955252/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0021",
            "CSAFPID-0020",
            "CSAFPID-0019",
            "CSAFPID-0022",
            "CSAFPID-0026",
            "CSAFPID-0025",
            "CSAFPID-0023",
            "CSAFPID-0024"
          ]
        }
      ],
      "title": "CVE-2023-0286"
    },
    {
      "cve": "CVE-2023-0464",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A security vulnerability has been identified in all supported versions of OpenSSL related to the verification of X.509 certificate chains that include policy constraints. Attackers may be able to exploit this vulnerability by creating a malicious certificate chain that triggers exponential use of computational resources, leading to a denial-of-service (DoS) attack on affected systems.\r\n\r\nPolicy processing is disabled by default but can be enabled by passing the `-policy` argument to the command line utilities or by calling the `X509_VERIFY_PARAM_set1_policies()` function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0021",
          "CSAFPID-0020",
          "CSAFPID-0019",
          "CSAFPID-0022",
          "CSAFPID-0026",
          "CSAFPID-0025",
          "CSAFPID-0023",
          "CSAFPID-0024"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V6.6.1 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0021",
            "CSAFPID-0020",
            "CSAFPID-0019",
            "CSAFPID-0022",
            "CSAFPID-0026",
            "CSAFPID-0025",
            "CSAFPID-0023",
            "CSAFPID-0024"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955252/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0021",
            "CSAFPID-0020",
            "CSAFPID-0019",
            "CSAFPID-0022",
            "CSAFPID-0026",
            "CSAFPID-0025",
            "CSAFPID-0023",
            "CSAFPID-0024"
          ]
        }
      ],
      "title": "CVE-2023-0464"
    },
    {
      "cve": "CVE-2023-0465",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Applications that use a non-default option when verifying certificates may be\r\nvulnerable to an attack from a malicious CA to circumvent certain checks.\r\n\r\nInvalid certificate policies in leaf certificates are silently ignored by\r\nOpenSSL and other certificate policy checks are skipped for that certificate.\r\nA malicious CA could use this to deliberately assert invalid certificate policies\r\nin order to circumvent policy checking on the certificate altogether.\r\n\r\nPolicy processing is disabled by default but can be enabled by passing\r\nthe `-policy` argument to the command line utilities or by calling the\r\n`X509_VERIFY_PARAM_set1_policies()` function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0021",
          "CSAFPID-0020",
          "CSAFPID-0019",
          "CSAFPID-0022",
          "CSAFPID-0026",
          "CSAFPID-0025",
          "CSAFPID-0023",
          "CSAFPID-0024"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V6.6.1 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0021",
            "CSAFPID-0020",
            "CSAFPID-0019",
            "CSAFPID-0022",
            "CSAFPID-0026",
            "CSAFPID-0025",
            "CSAFPID-0023",
            "CSAFPID-0024"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955252/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0021",
            "CSAFPID-0020",
            "CSAFPID-0019",
            "CSAFPID-0022",
            "CSAFPID-0026",
            "CSAFPID-0025",
            "CSAFPID-0023",
            "CSAFPID-0024"
          ]
        }
      ],
      "title": "CVE-2023-0465"
    },
    {
      "cve": "CVE-2023-0466",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The function X509_VERIFY_PARAM_add0_policy() is documented to\nimplicitly enable the certificate policy check when doing certificate\nverification. However the implementation of the function does not\nenable the check which allows certificates with invalid or incorrect\npolicies to pass the certificate verification.\n\nAs suddenly enabling the policy check could break existing deployments it was\ndecided to keep the existing behavior of the X509_VERIFY_PARAM_add0_policy()\nfunction.\n\nInstead the applications that require OpenSSL to perform certificate\npolicy check need to use X509_VERIFY_PARAM_set1_policies() or explicitly\nenable the policy check by calling X509_VERIFY_PARAM_set_flags() with\nthe X509_V_FLAG_POLICY_CHECK flag argument.\n\nCertificate policy checks are disabled by default in OpenSSL and are not\ncommonly used by applications.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0021",
          "CSAFPID-0020",
          "CSAFPID-0019",
          "CSAFPID-0022",
          "CSAFPID-0026",
          "CSAFPID-0025",
          "CSAFPID-0023",
          "CSAFPID-0024"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V6.6.1 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0021",
            "CSAFPID-0020",
            "CSAFPID-0019",
            "CSAFPID-0022",
            "CSAFPID-0026",
            "CSAFPID-0025",
            "CSAFPID-0023",
            "CSAFPID-0024"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955252/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0021",
            "CSAFPID-0020",
            "CSAFPID-0019",
            "CSAFPID-0022",
            "CSAFPID-0026",
            "CSAFPID-0025",
            "CSAFPID-0023",
            "CSAFPID-0024"
          ]
        }
      ],
      "title": "CVE-2023-0466"
    }
  ]
}

{
  "document": {
    "acknowledgments": [
      {
        "organization": "Siemens ProductCERT",
        "summary": "reporting these vulnerabilities to CISA."
      }
    ],
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Disclosure is not limited",
      "tlp": {
        "label": "WHITE",
        "url": "https://us-cert.cisa.gov/tlp/"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "Siemens has released a new version for ST7 ScadaConnect and recommends to update to the latest version.",
        "title": "Summary"
      },
      {
        "category": "general",
        "text": "As a general security measure, Siemens strongly recommends to protect network access to devices with appropriate mechanisms. In order to operate the devices in a protected IT environment, Siemens recommends to configure the environment according to Siemens\u0027 operational guidelines for Industrial Security (Download: \nhttps://www.siemens.com/cert/operational-guidelines-industrial-security), and to follow the recommendations in the product manuals.\nAdditional information on Industrial Security by Siemens can be found at: https://www.siemens.com/industrialsecurity",
        "title": "General Recommendations"
      },
      {
        "category": "general",
        "text": "For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories",
        "title": "Additional Resources"
      },
      {
        "category": "legal_disclaimer",
        "text": "Siemens Security Advisories are subject to the terms and conditions contained in Siemens\u0027 underlying license terms or other applicable agreements previously agreed to with Siemens (hereinafter \"License Terms\"). To the extent applicable to information, software or documentation made available in or through a Siemens Security Advisory, the Terms of Use of Siemens\u0027 Global Website (https://www.siemens.com/terms_of_use, hereinafter \"Terms of Use\"), in particular Sections 8-10 of the Terms of Use, shall apply additionally. In case of conflicts, the License Terms shall prevail over the Terms of Use.",
        "title": "Terms of Use"
      },
      {
        "category": "legal_disclaimer",
        "text": "All information products included in https://us-cert.cisa.gov/ics are provided \"as is\" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see https://us-cert.cisa.gov/tlp/.",
        "title": "Legal Notice"
      },
      {
        "category": "other",
        "text": "This CISA CSAF advisory was converted from Siemens ProductCERT\u0027s CSAF advisory.",
        "title": "Advisory Conversion Disclaimer"
      },
      {
        "category": "other",
        "text": "Multiple",
        "title": "Critical infrastructure sectors"
      },
      {
        "category": "other",
        "text": "Worldwide",
        "title": "Countries/areas deployed"
      },
      {
        "category": "other",
        "text": "Germany",
        "title": "Company headquarters location"
      },
      {
        "category": "general",
        "text": "CISA recommends users take defensive measures to minimize the exploitation risk of this vulnerability.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Minimize network exposure for all control system devices and/or systems, and ensure they are not accessible from the internet.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Locate control system networks and remote devices behind firewalls and isolate them from business networks.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "When remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most recent version available. Also recognize VPN is only as secure as its connected devices.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets. Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.",
        "title": "Recommended Practices"
      }
    ],
    "publisher": {
      "category": "other",
      "contact_details": "central@cisa.dhs.gov",
      "name": "CISA",
      "namespace": "https://www.cisa.gov/"
    },
    "references": [
      {
        "category": "self",
        "summary": "SSA-341067: Multiple vulnerabilities in third-party components in ST7 ScadaConnect  before V1.1 - CSAF Version",
        "url": "https://cert-portal.siemens.com/productcert/csaf/ssa-341067.json"
      },
      {
        "category": "self",
        "summary": "SSA-341067: Multiple vulnerabilities in third-party components in ST7 ScadaConnect  before V1.1 - HTML Version",
        "url": "https://cert-portal.siemens.com/productcert/html/ssa-341067.html"
      },
      {
        "category": "self",
        "summary": "SSA-341067: Multiple vulnerabilities in third-party components in ST7 ScadaConnect  before V1.1 - PDF Version",
        "url": "https://cert-portal.siemens.com/productcert/pdf/ssa-341067.pdf"
      },
      {
        "category": "self",
        "summary": "SSA-341067: Multiple vulnerabilities in third-party components in ST7 ScadaConnect  before V1.1 - TXT Version",
        "url": "https://cert-portal.siemens.com/productcert/txt/ssa-341067.txt"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-24-165-04 JSON",
        "url": "https://raw.githubusercontent.com/cisagov/CSAF/develop/csaf_files/OT/white/2024/icsa-24-165-04.json"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-24-165-04 - Web Version",
        "url": "https://www.cisa.gov/news-events/ics-advisories/icsa-24-165-04"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/alerts/ICS-ALERT-10-301-01"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/resources-tools/resources/ics-recommended-practices"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/topics/industrial-control-systems"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/sites/default/files/publications/Cybersecurity_Best_Practices_for_Industrial_Control_Systems.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/tips/ICS-TIP-12-146-01B"
      }
    ],
    "title": "Siemens ST7 ScadaConnect",
    "tracking": {
      "current_release_date": "2024-06-11T00:00:00.000000Z",
      "generator": {
        "engine": {
          "name": "CISA CSAF Generator",
          "version": "1.0.0"
        }
      },
      "id": "ICSA-24-165-04",
      "initial_release_date": "2024-06-11T00:00:00.000000Z",
      "revision_history": [
        {
          "date": "2024-06-11T00:00:00.000000Z",
          "legacy_version": "1.0",
          "number": "1",
          "summary": "Publication Date"
        }
      ],
      "status": "final",
      "version": "1"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV1.1",
                "product": {
                  "name": "ST7 ScadaConnect (6NH7997-5DA10-0AA0)",
                  "product_id": "CSAFPID-0001",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6NH7997-5DA10-0AA0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "ST7 ScadaConnect (6NH7997-5DA10-0AA0)"
          }
        ],
        "category": "vendor",
        "name": "Siemens"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2022-40303",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.10.3. When parsing a multi-gigabyte XML document with the XML_PARSE_HUGE parser option enabled, several integer counters can overflow. This results in an attempt to access an array at a negative 2GB offset, typically leading to a segmentation fault.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-40303"
    },
    {
      "cve": "CVE-2022-40304",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.10.3. Certain invalid XML entity definitions can corrupt a hash table key, potentially leading to subsequent logic errors. In one case, a double-free can be provoked.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-40304"
    },
    {
      "cve": "CVE-2023-0464",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A security vulnerability has been identified in all supported versions of OpenSSL related to the verification of X.509 certificate chains that include policy constraints. Attackers may be able to exploit this vulnerability by creating a malicious certificate chain that triggers exponential use of computational resources, leading to a denial-of-service (DoS) attack on affected systems.\r\n\r\nPolicy processing is disabled by default but can be enabled by passing the `-policy` argument to the command line utilities or by calling the `X509_VERIFY_PARAM_set1_policies()` function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-0464"
    },
    {
      "cve": "CVE-2023-0465",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Applications that use a non-default option when verifying certificates may be\r\nvulnerable to an attack from a malicious CA to circumvent certain checks.\r\n\r\nInvalid certificate policies in leaf certificates are silently ignored by\r\nOpenSSL and other certificate policy checks are skipped for that certificate.\r\nA malicious CA could use this to deliberately assert invalid certificate policies\r\nin order to circumvent policy checking on the certificate altogether.\r\n\r\nPolicy processing is disabled by default but can be enabled by passing\r\nthe `-policy` argument to the command line utilities or by calling the\r\n`X509_VERIFY_PARAM_set1_policies()` function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-0465"
    },
    {
      "cve": "CVE-2023-0466",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The function X509_VERIFY_PARAM_add0_policy() is documented to\nimplicitly enable the certificate policy check when doing certificate\nverification. However the implementation of the function does not\nenable the check which allows certificates with invalid or incorrect\npolicies to pass the certificate verification.\n\nAs suddenly enabling the policy check could break existing deployments it was\ndecided to keep the existing behavior of the X509_VERIFY_PARAM_add0_policy()\nfunction.\n\nInstead the applications that require OpenSSL to perform certificate\npolicy check need to use X509_VERIFY_PARAM_set1_policies() or explicitly\nenable the policy check by calling X509_VERIFY_PARAM_set_flags() with\nthe X509_V_FLAG_POLICY_CHECK flag argument.\n\nCertificate policy checks are disabled by default in OpenSSL and are not\ncommonly used by applications.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-0466"
    },
    {
      "cve": "CVE-2023-3446",
      "cwe": {
        "id": "CWE-1333",
        "name": "Inefficient Regular Expression Complexity"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. One of those checks confirms that the modulus (\u0027p\u0027 parameter) is not too large. Trying to use a very large modulus is slow and OpenSSL will not normally use a modulus which is over 10,000 bits in length. However the DH_check() function checks numerous aspects of the key or parameters that have been supplied. Some of those checks use the supplied modulus value even if it has already been found to be too large. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulernable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the \u0027-check\u0027 option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-3446"
    },
    {
      "cve": "CVE-2023-5678",
      "cwe": {
        "id": "CWE-754",
        "name": "Improper Check for Unusual or Exceptional Conditions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Generating excessively long X9.42 DH keys or checking excessively long X9.42 DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_generate_key() to generate an X9.42 DH key may experience long delays. Likewise, applications that use DH_check_pub_key(), DH_check_pub_key_ex() or EVP_PKEY_public_check() to check an X9.42 DH key or X9.42 DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. While DH_check() performs all the necessary checks (as of CVE-2023-3817), DH_check_pub_key() doesn\u0027t make any of these checks, and is therefore vulnerable for excessively large P and Q parameters. Likewise, while DH_generate_key() performs a check for an excessively large P, it doesn\u0027t check for an excessively large Q. An application that calls DH_generate_key() or DH_check_pub_key() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. DH_generate_key() and DH_check_pub_key() are also called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_pub_key_ex(), EVP_PKEY_public_check(), and EVP_PKEY_generate(). Also vulnerable are the OpenSSL pkey command line application when using the \"-pubcheck\" option, as well as the OpenSSL genpkey command line application. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-5678"
    },
    {
      "cve": "CVE-2023-21808",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": ".NET and Visual Studio Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-21808"
    },
    {
      "cve": "CVE-2023-24895",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": ".NET, .NET Framework, and Visual Studio Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-24895"
    },
    {
      "cve": "CVE-2023-24897",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": ".NET, .NET Framework, and Visual Studio Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-24897"
    },
    {
      "cve": "CVE-2023-24936",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": ".NET, .NET Framework, and Visual Studio Elevation of Privilege Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-24936"
    },
    {
      "cve": "CVE-2023-28260",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": ".NET DLL Hijacking Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-28260"
    },
    {
      "cve": "CVE-2023-28484",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libxml2 before 2.10.4, parsing of certain invalid XSD schemas can lead to a NULL pointer dereference and subsequently a segfault. This occurs in xmlSchemaFixupComplexType in xmlschemas.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-28484"
    },
    {
      "cve": "CVE-2023-29331",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": ".NET, .NET Framework, and Visual Studio Denial of Service Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-29331"
    },
    {
      "cve": "CVE-2023-29469",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.10.4. When hashing empty dict strings in a crafted XML document, xmlDictComputeFastKey in dict.c can produce non-deterministic values, leading to various logic and memory errors, such as a double free. This behavior occurs because there is an attempt to use the first byte of an empty string, and any value is possible (not solely the \u0027\\0\u0027 value).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-29469"
    },
    {
      "cve": "CVE-2023-32032",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": ".NET and Visual Studio Elevation of Privilege Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:L/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-32032"
    },
    {
      "cve": "CVE-2023-33126",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": ".NET and Visual Studio Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.3,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-33126"
    },
    {
      "cve": "CVE-2023-33127",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": ".NET and Visual Studio Elevation of Privilege Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-33127"
    },
    {
      "cve": "CVE-2023-33128",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": ".NET and Visual Studio Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.3,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-33128"
    },
    {
      "cve": "CVE-2023-33135",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": ".NET and Visual Studio Elevation of Privilege Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.3,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-33135"
    },
    {
      "cve": "CVE-2023-33170",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ASP.NET and Visual Studio Security Feature Bypass Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-33170"
    },
    {
      "cve": "CVE-2023-35390",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": ".NET and Visual Studio Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-35390"
    },
    {
      "cve": "CVE-2023-35391",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ASP.NET Core SignalR and Visual Studio Information Disclosure Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.2,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-35391"
    },
    {
      "cve": "CVE-2023-36038",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ASP.NET Core Denial of Service Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.2,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-36038"
    },
    {
      "cve": "CVE-2023-36049",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": ".NET, .NET Framework, and Visual Studio Elevation of Privilege Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.6,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:H/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-36049"
    },
    {
      "cve": "CVE-2023-36435",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Microsoft QUIC Denial of Service Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-36435"
    },
    {
      "cve": "CVE-2023-36558",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ASP.NET Core - Security Feature Bypass Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.2,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-36558"
    },
    {
      "cve": "CVE-2023-36792",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Visual Studio Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-36792"
    },
    {
      "cve": "CVE-2023-36793",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Visual Studio Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-36793"
    },
    {
      "cve": "CVE-2023-36794",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Visual Studio Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-36794"
    },
    {
      "cve": "CVE-2023-36796",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Visual Studio Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-36796"
    },
    {
      "cve": "CVE-2023-36799",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": ".NET Core and Visual Studio Denial of Service Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-36799"
    },
    {
      "cve": "CVE-2023-38171",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Microsoft QUIC Denial of Service Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-38171"
    },
    {
      "cve": "CVE-2023-38178",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": ".NET Core and Visual Studio Denial of Service Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-38178"
    },
    {
      "cve": "CVE-2023-38180",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": ".NET and Visual Studio Denial of Service Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-38180"
    },
    {
      "cve": "CVE-2023-39615",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Xmlsoft Libxml2 v2.11.0 was discovered to contain an out-of-bounds read via the xmlSAX2StartElement() function at /libxml2/SAX2.c. This vulnerability allows attackers to cause a Denial of Service (DoS) via supplying a crafted XML file. NOTE: the vendor\u0027s position is that the product does not support the legacy SAX1 interface with custom callbacks; there is a crash even without crafted input.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-39615"
    },
    {
      "cve": "CVE-2023-44487",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The HTTP/2 protocol allows a denial of service (server resource consumption) because request cancellation can reset many streams quickly, as exploited in the wild in August through October 2023.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-44487"
    }
  ]
}

{
  "document": {
    "acknowledgments": [
      {
        "organization": "Siemens ProductCERT",
        "summary": "reporting these vulnerabilities to CISA."
      }
    ],
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Disclosure is not limited",
      "tlp": {
        "label": "WHITE",
        "url": "https://us-cert.cisa.gov/tlp/"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "Siemens has released a new version for ST7 ScadaConnect and recommends to update to the latest version.",
        "title": "Summary"
      },
      {
        "category": "general",
        "text": "As a general security measure, Siemens strongly recommends to protect network access to devices with appropriate mechanisms. In order to operate the devices in a protected IT environment, Siemens recommends to configure the environment according to Siemens\u0027 operational guidelines for Industrial Security (Download: \nhttps://www.siemens.com/cert/operational-guidelines-industrial-security), and to follow the recommendations in the product manuals.\nAdditional information on Industrial Security by Siemens can be found at: https://www.siemens.com/industrialsecurity",
        "title": "General Recommendations"
      },
      {
        "category": "general",
        "text": "For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories",
        "title": "Additional Resources"
      },
      {
        "category": "legal_disclaimer",
        "text": "Siemens Security Advisories are subject to the terms and conditions contained in Siemens\u0027 underlying license terms or other applicable agreements previously agreed to with Siemens (hereinafter \"License Terms\"). To the extent applicable to information, software or documentation made available in or through a Siemens Security Advisory, the Terms of Use of Siemens\u0027 Global Website (https://www.siemens.com/terms_of_use, hereinafter \"Terms of Use\"), in particular Sections 8-10 of the Terms of Use, shall apply additionally. In case of conflicts, the License Terms shall prevail over the Terms of Use.",
        "title": "Terms of Use"
      },
      {
        "category": "legal_disclaimer",
        "text": "All information products included in https://us-cert.cisa.gov/ics are provided \"as is\" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see https://us-cert.cisa.gov/tlp/.",
        "title": "Legal Notice"
      },
      {
        "category": "other",
        "text": "This CISA CSAF advisory was converted from Siemens ProductCERT\u0027s CSAF advisory.",
        "title": "Advisory Conversion Disclaimer"
      },
      {
        "category": "other",
        "text": "Multiple",
        "title": "Critical infrastructure sectors"
      },
      {
        "category": "other",
        "text": "Worldwide",
        "title": "Countries/areas deployed"
      },
      {
        "category": "other",
        "text": "Germany",
        "title": "Company headquarters location"
      },
      {
        "category": "general",
        "text": "CISA recommends users take defensive measures to minimize the exploitation risk of this vulnerability.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Minimize network exposure for all control system devices and/or systems, and ensure they are not accessible from the internet.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Locate control system networks and remote devices behind firewalls and isolate them from business networks.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "When remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most recent version available. Also recognize VPN is only as secure as its connected devices.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets. Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.",
        "title": "Recommended Practices"
      }
    ],
    "publisher": {
      "category": "other",
      "contact_details": "central@cisa.dhs.gov",
      "name": "CISA",
      "namespace": "https://www.cisa.gov/"
    },
    "references": [
      {
        "category": "self",
        "summary": "SSA-341067: Multiple vulnerabilities in third-party components in ST7 ScadaConnect  before V1.1 - CSAF Version",
        "url": "https://cert-portal.siemens.com/productcert/csaf/ssa-341067.json"
      },
      {
        "category": "self",
        "summary": "SSA-341067: Multiple vulnerabilities in third-party components in ST7 ScadaConnect  before V1.1 - HTML Version",
        "url": "https://cert-portal.siemens.com/productcert/html/ssa-341067.html"
      },
      {
        "category": "self",
        "summary": "SSA-341067: Multiple vulnerabilities in third-party components in ST7 ScadaConnect  before V1.1 - PDF Version",
        "url": "https://cert-portal.siemens.com/productcert/pdf/ssa-341067.pdf"
      },
      {
        "category": "self",
        "summary": "SSA-341067: Multiple vulnerabilities in third-party components in ST7 ScadaConnect  before V1.1 - TXT Version",
        "url": "https://cert-portal.siemens.com/productcert/txt/ssa-341067.txt"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-24-165-04 JSON",
        "url": "https://raw.githubusercontent.com/cisagov/CSAF/develop/csaf_files/OT/white/2024/icsa-24-165-04.json"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-24-165-04 - Web Version",
        "url": "https://www.cisa.gov/news-events/ics-advisories/icsa-24-165-04"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/alerts/ICS-ALERT-10-301-01"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/resources-tools/resources/ics-recommended-practices"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/topics/industrial-control-systems"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/sites/default/files/publications/Cybersecurity_Best_Practices_for_Industrial_Control_Systems.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/tips/ICS-TIP-12-146-01B"
      }
    ],
    "title": "Siemens ST7 ScadaConnect",
    "tracking": {
      "current_release_date": "2024-06-11T00:00:00.000000Z",
      "generator": {
        "engine": {
          "name": "CISA CSAF Generator",
          "version": "1.0.0"
        }
      },
      "id": "ICSA-24-165-04",
      "initial_release_date": "2024-06-11T00:00:00.000000Z",
      "revision_history": [
        {
          "date": "2024-06-11T00:00:00.000000Z",
          "legacy_version": "1.0",
          "number": "1",
          "summary": "Publication Date"
        }
      ],
      "status": "final",
      "version": "1"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV1.1",
                "product": {
                  "name": "ST7 ScadaConnect (6NH7997-5DA10-0AA0)",
                  "product_id": "CSAFPID-0001",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6NH7997-5DA10-0AA0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "ST7 ScadaConnect (6NH7997-5DA10-0AA0)"
          }
        ],
        "category": "vendor",
        "name": "Siemens"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2022-40303",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.10.3. When parsing a multi-gigabyte XML document with the XML_PARSE_HUGE parser option enabled, several integer counters can overflow. This results in an attempt to access an array at a negative 2GB offset, typically leading to a segmentation fault.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-40303"
    },
    {
      "cve": "CVE-2022-40304",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.10.3. Certain invalid XML entity definitions can corrupt a hash table key, potentially leading to subsequent logic errors. In one case, a double-free can be provoked.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-40304"
    },
    {
      "cve": "CVE-2023-0464",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A security vulnerability has been identified in all supported versions of OpenSSL related to the verification of X.509 certificate chains that include policy constraints. Attackers may be able to exploit this vulnerability by creating a malicious certificate chain that triggers exponential use of computational resources, leading to a denial-of-service (DoS) attack on affected systems.\r\n\r\nPolicy processing is disabled by default but can be enabled by passing the `-policy` argument to the command line utilities or by calling the `X509_VERIFY_PARAM_set1_policies()` function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-0464"
    },
    {
      "cve": "CVE-2023-0465",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Applications that use a non-default option when verifying certificates may be\r\nvulnerable to an attack from a malicious CA to circumvent certain checks.\r\n\r\nInvalid certificate policies in leaf certificates are silently ignored by\r\nOpenSSL and other certificate policy checks are skipped for that certificate.\r\nA malicious CA could use this to deliberately assert invalid certificate policies\r\nin order to circumvent policy checking on the certificate altogether.\r\n\r\nPolicy processing is disabled by default but can be enabled by passing\r\nthe `-policy` argument to the command line utilities or by calling the\r\n`X509_VERIFY_PARAM_set1_policies()` function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-0465"
    },
    {
      "cve": "CVE-2023-0466",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The function X509_VERIFY_PARAM_add0_policy() is documented to\nimplicitly enable the certificate policy check when doing certificate\nverification. However the implementation of the function does not\nenable the check which allows certificates with invalid or incorrect\npolicies to pass the certificate verification.\n\nAs suddenly enabling the policy check could break existing deployments it was\ndecided to keep the existing behavior of the X509_VERIFY_PARAM_add0_policy()\nfunction.\n\nInstead the applications that require OpenSSL to perform certificate\npolicy check need to use X509_VERIFY_PARAM_set1_policies() or explicitly\nenable the policy check by calling X509_VERIFY_PARAM_set_flags() with\nthe X509_V_FLAG_POLICY_CHECK flag argument.\n\nCertificate policy checks are disabled by default in OpenSSL and are not\ncommonly used by applications.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-0466"
    },
    {
      "cve": "CVE-2023-3446",
      "cwe": {
        "id": "CWE-1333",
        "name": "Inefficient Regular Expression Complexity"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. One of those checks confirms that the modulus (\u0027p\u0027 parameter) is not too large. Trying to use a very large modulus is slow and OpenSSL will not normally use a modulus which is over 10,000 bits in length. However the DH_check() function checks numerous aspects of the key or parameters that have been supplied. Some of those checks use the supplied modulus value even if it has already been found to be too large. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulernable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the \u0027-check\u0027 option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-3446"
    },
    {
      "cve": "CVE-2023-5678",
      "cwe": {
        "id": "CWE-754",
        "name": "Improper Check for Unusual or Exceptional Conditions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Generating excessively long X9.42 DH keys or checking excessively long X9.42 DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_generate_key() to generate an X9.42 DH key may experience long delays. Likewise, applications that use DH_check_pub_key(), DH_check_pub_key_ex() or EVP_PKEY_public_check() to check an X9.42 DH key or X9.42 DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. While DH_check() performs all the necessary checks (as of CVE-2023-3817), DH_check_pub_key() doesn\u0027t make any of these checks, and is therefore vulnerable for excessively large P and Q parameters. Likewise, while DH_generate_key() performs a check for an excessively large P, it doesn\u0027t check for an excessively large Q. An application that calls DH_generate_key() or DH_check_pub_key() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. DH_generate_key() and DH_check_pub_key() are also called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_pub_key_ex(), EVP_PKEY_public_check(), and EVP_PKEY_generate(). Also vulnerable are the OpenSSL pkey command line application when using the \"-pubcheck\" option, as well as the OpenSSL genpkey command line application. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-5678"
    },
    {
      "cve": "CVE-2023-21808",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": ".NET and Visual Studio Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-21808"
    },
    {
      "cve": "CVE-2023-24895",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": ".NET, .NET Framework, and Visual Studio Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-24895"
    },
    {
      "cve": "CVE-2023-24897",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": ".NET, .NET Framework, and Visual Studio Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-24897"
    },
    {
      "cve": "CVE-2023-24936",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": ".NET, .NET Framework, and Visual Studio Elevation of Privilege Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-24936"
    },
    {
      "cve": "CVE-2023-28260",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": ".NET DLL Hijacking Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-28260"
    },
    {
      "cve": "CVE-2023-28484",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libxml2 before 2.10.4, parsing of certain invalid XSD schemas can lead to a NULL pointer dereference and subsequently a segfault. This occurs in xmlSchemaFixupComplexType in xmlschemas.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-28484"
    },
    {
      "cve": "CVE-2023-29331",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": ".NET, .NET Framework, and Visual Studio Denial of Service Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-29331"
    },
    {
      "cve": "CVE-2023-29469",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.10.4. When hashing empty dict strings in a crafted XML document, xmlDictComputeFastKey in dict.c can produce non-deterministic values, leading to various logic and memory errors, such as a double free. This behavior occurs because there is an attempt to use the first byte of an empty string, and any value is possible (not solely the \u0027\\0\u0027 value).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-29469"
    },
    {
      "cve": "CVE-2023-32032",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": ".NET and Visual Studio Elevation of Privilege Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:L/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-32032"
    },
    {
      "cve": "CVE-2023-33126",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": ".NET and Visual Studio Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.3,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-33126"
    },
    {
      "cve": "CVE-2023-33127",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": ".NET and Visual Studio Elevation of Privilege Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-33127"
    },
    {
      "cve": "CVE-2023-33128",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": ".NET and Visual Studio Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.3,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-33128"
    },
    {
      "cve": "CVE-2023-33135",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": ".NET and Visual Studio Elevation of Privilege Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.3,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-33135"
    },
    {
      "cve": "CVE-2023-33170",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ASP.NET and Visual Studio Security Feature Bypass Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-33170"
    },
    {
      "cve": "CVE-2023-35390",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": ".NET and Visual Studio Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-35390"
    },
    {
      "cve": "CVE-2023-35391",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ASP.NET Core SignalR and Visual Studio Information Disclosure Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.2,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-35391"
    },
    {
      "cve": "CVE-2023-36038",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ASP.NET Core Denial of Service Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.2,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-36038"
    },
    {
      "cve": "CVE-2023-36049",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": ".NET, .NET Framework, and Visual Studio Elevation of Privilege Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.6,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:H/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-36049"
    },
    {
      "cve": "CVE-2023-36435",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Microsoft QUIC Denial of Service Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-36435"
    },
    {
      "cve": "CVE-2023-36558",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ASP.NET Core - Security Feature Bypass Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.2,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-36558"
    },
    {
      "cve": "CVE-2023-36792",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Visual Studio Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-36792"
    },
    {
      "cve": "CVE-2023-36793",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Visual Studio Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-36793"
    },
    {
      "cve": "CVE-2023-36794",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Visual Studio Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-36794"
    },
    {
      "cve": "CVE-2023-36796",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Visual Studio Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-36796"
    },
    {
      "cve": "CVE-2023-36799",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": ".NET Core and Visual Studio Denial of Service Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-36799"
    },
    {
      "cve": "CVE-2023-38171",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Microsoft QUIC Denial of Service Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-38171"
    },
    {
      "cve": "CVE-2023-38178",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": ".NET Core and Visual Studio Denial of Service Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-38178"
    },
    {
      "cve": "CVE-2023-38180",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": ".NET and Visual Studio Denial of Service Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-38180"
    },
    {
      "cve": "CVE-2023-39615",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Xmlsoft Libxml2 v2.11.0 was discovered to contain an out-of-bounds read via the xmlSAX2StartElement() function at /libxml2/SAX2.c. This vulnerability allows attackers to cause a Denial of Service (DoS) via supplying a crafted XML file. NOTE: the vendor\u0027s position is that the product does not support the legacy SAX1 interface with custom callbacks; there is a crash even without crafted input.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-39615"
    },
    {
      "cve": "CVE-2023-44487",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The HTTP/2 protocol allows a denial of service (server resource consumption) because request cancellation can reset many streams quickly, as exploited in the wild in August through October 2023.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955597/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-44487"
    }
  ]
}

{
  "document": {
    "acknowledgments": [
      {
        "organization": "Siemens ProductCERT",
        "summary": "reporting these vulnerabilities to CISA."
      }
    ],
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Disclosure is not limited",
      "tlp": {
        "label": "WHITE",
        "url": "https://us-cert.cisa.gov/tlp/"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the SIMATIC S7-1500 TM MFP V1.0.\n\nSiemens has released a new version for SIMATIC S7-1500 TM MFP -\u00a0GNU/Linux subsystem and recommends to update to the latest version.\n\nThis advisory lists vulnerabilities for firmware version V1.0 only; for V1.1 refer to Siemens Security Advisory SSA-265688 (\nhttps://cert-portal.siemens.com/productcert/html/ssa-265688.html).",
        "title": "Summary"
      },
      {
        "category": "general",
        "text": "As a general security measure, Siemens strongly recommends to protect network access to devices with appropriate mechanisms. In order to operate the devices in a protected IT environment, Siemens recommends to configure the environment according to Siemens\u0027 operational guidelines for Industrial Security (Download: \nhttps://www.siemens.com/cert/operational-guidelines-industrial-security), and to follow the recommendations in the product manuals.\nAdditional information on Industrial Security by Siemens can be found at: https://www.siemens.com/industrialsecurity",
        "title": "General Recommendations"
      },
      {
        "category": "general",
        "text": "For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories",
        "title": "Additional Resources"
      },
      {
        "category": "legal_disclaimer",
        "text": "Siemens Security Advisories are subject to the terms and conditions contained in Siemens\u0027 underlying license terms or other applicable agreements previously agreed to with Siemens (hereinafter \"License Terms\"). To the extent applicable to information, software or documentation made available in or through a Siemens Security Advisory, the Terms of Use of Siemens\u0027 Global Website (https://www.siemens.com/terms_of_use, hereinafter \"Terms of Use\"), in particular Sections 8-10 of the Terms of Use, shall apply additionally. In case of conflicts, the License Terms shall prevail over the Terms of Use.",
        "title": "Terms of Use"
      },
      {
        "category": "legal_disclaimer",
        "text": "All information products included in https://us-cert.cisa.gov/ics are provided \"as is\" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see https://us-cert.cisa.gov/tlp/.",
        "title": "Legal Notice"
      },
      {
        "category": "other",
        "text": "This CISA CSAF advisory was converted from Siemens ProductCERT\u0027s CSAF advisory.",
        "title": "Advisory Conversion Disclaimer"
      },
      {
        "category": "other",
        "text": "Multiple",
        "title": "Critical infrastructure sectors"
      },
      {
        "category": "other",
        "text": "Worldwide",
        "title": "Countries/areas deployed"
      },
      {
        "category": "other",
        "text": "Germany",
        "title": "Company headquarters location"
      },
      {
        "category": "general",
        "text": "CISA recommends users take defensive measures to minimize the exploitation risk of this vulnerability.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Minimize network exposure for all control system devices and/or systems, and ensure they are not accessible from the internet.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Locate control system networks and remote devices behind firewalls and isolate them from business networks.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "When remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most recent version available. Also recognize VPN is only as secure as its connected devices.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets. Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.",
        "title": "Recommended Practices"
      }
    ],
    "publisher": {
      "category": "other",
      "contact_details": "central@cisa.dhs.gov",
      "name": "CISA",
      "namespace": "https://www.cisa.gov/"
    },
    "references": [
      {
        "category": "self",
        "summary": "SSA-794697: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 TM MFP before V1.1 - CSAF Version",
        "url": "https://cert-portal.siemens.com/productcert/csaf/ssa-794697.json"
      },
      {
        "category": "self",
        "summary": "SSA-794697: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 TM MFP before V1.1 - HTML Version",
        "url": "https://cert-portal.siemens.com/productcert/html/ssa-794697.html"
      },
      {
        "category": "self",
        "summary": "SSA-794697: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 TM MFP before V1.1 - PDF Version",
        "url": "https://cert-portal.siemens.com/productcert/pdf/ssa-794697.pdf"
      },
      {
        "category": "self",
        "summary": "SSA-794697: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 TM MFP before V1.1 - TXT Version",
        "url": "https://cert-portal.siemens.com/productcert/txt/ssa-794697.txt"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-23-166-11 JSON",
        "url": "https://raw.githubusercontent.com/cisagov/CSAF/develop/csaf_files/OT/white/2023/icsa-23-166-11.json"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-23-166-11 - Web Version",
        "url": "https://www.cisa.gov/news-events/ics-advisories/icsa-23-166-11"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/alerts/ICS-ALERT-10-301-01"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/resources-tools/resources/ics-recommended-practices"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/topics/industrial-control-systems"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/sites/default/files/publications/Cybersecurity_Best_Practices_for_Industrial_Control_Systems.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/tips/ICS-TIP-12-146-01B"
      }
    ],
    "title": "Siemens SIMATIC S7-1500 TM MFP Linux Kernel",
    "tracking": {
      "current_release_date": "2024-04-09T00:00:00.000000Z",
      "generator": {
        "engine": {
          "name": "CISA CSAF Generator",
          "version": "1.0.0"
        }
      },
      "id": "ICSA-23-166-11",
      "initial_release_date": "2023-06-13T00:00:00.000000Z",
      "revision_history": [
        {
          "date": "2023-06-13T00:00:00.000000Z",
          "legacy_version": "1.0",
          "number": "1",
          "summary": "Publication Date"
        },
        {
          "date": "2023-07-11T00:00:00.000000Z",
          "legacy_version": "1.1",
          "number": "2",
          "summary": "Added CVE-2022-4269, CVE-2023-3141, CVE-2023-3268, CVE-2023-31436, CVE-2023-32233"
        },
        {
          "date": "2023-08-08T00:00:00.000000Z",
          "legacy_version": "1.2",
          "number": "3",
          "summary": "Added CVE-2023-3446, CVE-2023-3389, CVE-2022-1015, \r\nCVE-2023-3609"
        },
        {
          "date": "2023-09-12T00:00:00.000000Z",
          "legacy_version": "1.3",
          "number": "4",
          "summary": "Added CVE-2023-3338"
        },
        {
          "date": "2023-11-14T00:00:00.000000Z",
          "legacy_version": "1.4",
          "number": "5",
          "summary": "Added CVE-2023-1206, CVE-2023-2898, CVE-2023-3610, CVE-2023-3611, CVE-2023-3772, CVE-2023-3773, CVE-2023-3777, CVE-2023-4004, CVE-2023-4015, CVE-2023-4273, CVE-2023-4623, CVE-2023-4921, CVE-2023-35001, CVE-2023-37453, CVE-2023-39192, CVE-2023-39193, CVE-2023-39194, CVE-2023-42753, CVE-2023-42755"
        },
        {
          "date": "2023-12-12T00:00:00.000000Z",
          "legacy_version": "1.5",
          "number": "6",
          "summary": "Added CVE-2021-44879, CVE-2023-5178, CVE-2023-5197, CVE-2023-5678, CVE-2023-5717, CVE-2023-31085, CVE-2023-35827, CVE-2023-39189, CVE-2023-42754, CVE-2023-45863, CVE-2023-45871"
        },
        {
          "date": "2024-01-09T00:00:00.000000Z",
          "legacy_version": "1.6",
          "number": "7",
          "summary": "Added CVE-2023-48795"
        },
        {
          "date": "2024-02-13T00:00:00.000000Z",
          "legacy_version": "1.7",
          "number": "8",
          "summary": "Added CVE-2020-12762, CVE-2023-6606, CVE-2023-6931, CVE-2023-6932, CVE-2023-7008, CVE-2023-7104, CVE-2023-36660, CVE-2023-50495, CVE-2023-51384, CVE-2023-51385, CVE-2023-51767, CVE-2024-0232, CVE-2024-0553, CVE-2024-0567, CVE-2024-0584, CVE-2024-0684, CVE-2024-22365, CVE-2024-25062"
        },
        {
          "date": "2024-04-09T00:00:00.000000Z",
          "legacy_version": "1.8",
          "number": "9",
          "summary": "Added fix for SIMATIC S7-1500 TM MFP - GNU/Linux subsystem"
        }
      ],
      "status": "final",
      "version": "9"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV1.1",
                "product": {
                  "name": "SIMATIC S7-1500 TM MFP -\u00a0GNU/Linux subsystem",
                  "product_id": "CSAFPID-0001"
                }
              }
            ],
            "category": "product_name",
            "name": "SIMATIC S7-1500 TM MFP -\u00a0GNU/Linux subsystem"
          }
        ],
        "category": "vendor",
        "name": "Siemens"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2020-12762",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "json-c through 0.14 has an integer overflow and out-of-bounds write via a large JSON file, as demonstrated by printbuf_memappend.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2020-12762"
    },
    {
      "cve": "CVE-2021-3759",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A memory overflow vulnerability was found in the Linux kernel\u2019s ipc functionality of the memcg subsystem, in the way a user calls the semget function multiple times, creating semaphores. This flaw allows a local user to starve the resources, causing a denial of service. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2021-3759"
    },
    {
      "cve": "CVE-2021-4037",
      "cwe": {
        "id": "CWE-284",
        "name": "Improper Access Control"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in the fs/inode.c:inode_init_owner() function logic of the LInux kernel that allows local users to create files for the XFS file-system with an unintended group ownership and with group execution and SGID permission bits set, in a scenario where a directory is SGID and belongs to a certain group and is writable by a user who is not a member of this group. This can lead to excessive permissions granted in case when they should not. This vulnerability is similar to the previous CVE-2018-13405 and adds the missed fix for the XFS.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2021-4037"
    },
    {
      "cve": "CVE-2021-33655",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When sending malicous data to kernel by ioctl cmd FBIOPUT_VSCREENINFO,kernel will write memory out of bounds.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2021-33655"
    },
    {
      "cve": "CVE-2021-44879",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In gc_data_segment in fs/f2fs/gc.c in the Linux kernel before 5.16.3, special files are not considered, leading to a move_data_page NULL pointer dereference.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2021-44879"
    },
    {
      "cve": "CVE-2022-0171",
      "cwe": {
        "id": "CWE-459",
        "name": "Incomplete Cleanup"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel. The existing KVM SEV API has a vulnerability that allows a non-root (host) user-level application to crash the host kernel by creating a confidential guest VM instance in AMD CPU that supports Secure Encrypted Virtualization (SEV).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-0171"
    },
    {
      "cve": "CVE-2022-1012",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A memory leak problem was found in the TCP source port generation algorithm in net/ipv4/tcp.c due to the small table perturb size. This flaw may allow an attacker to information leak and may cause a denial of service problem.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.2,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-1012"
    },
    {
      "cve": "CVE-2022-1015",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel in linux/net/netfilter/nf_tables_api.c of the netfilter subsystem. This flaw allows a local user to cause an out-of-bounds write issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.6,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-1015"
    },
    {
      "cve": "CVE-2022-1184",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free flaw was found in fs/ext4/namei.c:dx_insert_block() in the Linux kernel\u2019s filesystem sub-component. This flaw allows a local attacker with a user privilege to cause a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-1184"
    },
    {
      "cve": "CVE-2022-1292",
      "cwe": {
        "id": "CWE-78",
        "name": "Improper Neutralization of Special Elements used in an OS Command (\u0027OS Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The c_rehash script does not properly sanitise shell metacharacters to prevent command injection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-1292"
    },
    {
      "cve": "CVE-2022-1343",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Under certain circumstances, the command line OCSP verify function reports successful verification when the verification in fact failed. In this case the incorrect successful response will also be accompanied by error messages showing the failure and contradicting the apparently successful result.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-1343"
    },
    {
      "cve": "CVE-2022-1434",
      "cwe": {
        "id": "CWE-327",
        "name": "Use of a Broken or Risky Cryptographic Algorithm"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When using the RC4-MD5 ciphersuite, which is disabled by default, an attacker is able to modify data in transit due to an incorrect use of the AAD data as the MAC key in OpenSSL 3.0. An attacker is not able to decrypt any communication.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-1434"
    },
    {
      "cve": "CVE-2022-1462",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds read flaw was found in the Linux kernel\u2019s TeleTYpe subsystem. The issue occurs in how a user triggers a race condition using ioctls TIOCSPTLCK and TIOCGPTPEER and TIOCSTI and TCXONC with leakage of memory in the flush_to_ldisc function. This flaw allows a local user to crash the system or read unauthorized random data from memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-1462"
    },
    {
      "cve": "CVE-2022-1473",
      "cwe": {
        "id": "CWE-404",
        "name": "Improper Resource Shutdown or Release"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The used OpenSSL version improperly reuses memory when decoding certificates or keys. This can lead to a process termination and Denial of Service for long lived processes.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-1473"
    },
    {
      "cve": "CVE-2022-1679",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free flaw was found in the Linux kernel\u2019s Atheros wireless adapter driver in the way a user forces the ath9k_htc_wait_for_target function to fail with some input messages. This flaw allows a local user to crash or potentially escalate their privileges on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-1679"
    },
    {
      "cve": "CVE-2022-1852",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer dereference flaw was found in the Linux kernel\u2019s KVM module, which can lead to a denial of service in the x86_emulate_insn in arch/x86/kvm/emulate.c. This flaw occurs while executing an illegal instruction in guest in the Intel CPU.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-1852"
    },
    {
      "cve": "CVE-2022-1882",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free flaw was found in the Linux kernel\u2019s pipes functionality in how a user performs manipulations with the pipe post_one_notification() after free_pipe_info() that is already called. This flaw allows a local user to crash or potentially escalate their privileges on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-1882"
    },
    {
      "cve": "CVE-2022-2068",
      "cwe": {
        "id": "CWE-78",
        "name": "Improper Neutralization of Special Elements used in an OS Command (\u0027OS Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In addition to the c_rehash shell command injection identified in CVE-2022-1292, further circumstances where the c_rehash script does not properly sanitise shell metacharacters to prevent command injection were found by code review. When the CVE-2022-1292 was fixed it was not discovered that there are other places in the script where the file names of certificates being hashed were possibly passed to a command executed through the shell. This script is distributed by some operating systems in a manner where it is automatically executed. On such operating systems, an attacker could execute arbitrary commands with the privileges of the script. Use of the c_rehash script is considered obsolete and should be replaced by the OpenSSL rehash command line tool.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-2068"
    },
    {
      "cve": "CVE-2022-2078",
      "cwe": {
        "id": "CWE-121",
        "name": "Stack-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in the Linux kernel\u0027s nft_set_desc_concat_parse() function .This flaw allows an attacker to trigger a buffer overflow via nft_set_desc_concat_parse() , causing a denial of service and possibly to run code.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-2078"
    },
    {
      "cve": "CVE-2022-2097",
      "cwe": {
        "id": "CWE-326",
        "name": "Inadequate Encryption Strength"
      },
      "notes": [
        {
          "category": "summary",
          "text": "AES OCB mode for 32-bit x86 platforms using the AES-NI assembly optimised implementation will not encrypt the entirety of the data under some circumstances. This could reveal sixteen bytes of data that was preexisting in the memory that wasn\u0027t written. In the special case of \"in place\" encryption, sixteen bytes of the plaintext would be revealed. Since OpenSSL does not support OCB based cipher suites for TLS and DTLS, they are both unaffected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-2097"
    },
    {
      "cve": "CVE-2022-2153",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel\u2019s KVM when attempting to set a SynIC IRQ. This issue makes it possible for a misbehaving VMM to write to SYNIC/STIMER MSRs, causing a NULL pointer dereference. This flaw allows an unprivileged local attacker on the host to issue specific ioctl calls, causing a kernel oops condition that results in a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-2153"
    },
    {
      "cve": "CVE-2022-2274",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The OpenSSL 3.0.4 release introduced a serious bug in the RSA implementation for X86_64 CPUs supporting the AVX512IFMA instructions. This issue makes the RSA implementation with 2048 bit private keys incorrect on such machines and memory corruption will happen during the computation. As a consequence of the memory corruption an attacker may be able to trigger a remote code execution on the machine performing the computation. SSL/TLS servers or other servers using 2048 bit RSA private keys running on machines supporting AVX512IFMA instructions of the X86_64 architecture are affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-2274"
    },
    {
      "cve": "CVE-2022-2327",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "io_uring use work_flags to determine which identity need to grab from the calling process to make sure it is consistent with the calling process when executing IORING_OP. Some operations are missing some types, which can lead to incorrect reference counts which can then lead to a double free. We recommend upgrading the kernel past commit df3f3bb5059d20ef094d6b2f0256c4bf4127a859",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-2327"
    },
    {
      "cve": "CVE-2022-2503",
      "cwe": {
        "id": "CWE-287",
        "name": "Improper Authentication"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Dm-verity is used for extending root-of-trust to root filesystems. LoadPin builds on this property to restrict module/firmware loads to just the trusted root filesystem. Device-mapper table reloads currently allow users with root privileges to switch out the target with an equivalent dm-linear target and bypass verification till reboot. This allows root to bypass LoadPin and can be used to load untrusted and unverified kernel modules and firmware, which implies arbitrary kernel execution and persistence for peripherals that do not verify firmware updates. We recommend upgrading past commit 4caae58406f8ceb741603eee460d79bacca9b1b5",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-2503"
    },
    {
      "cve": "CVE-2022-2586",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free flaw was found in nf_tables cross-table in the net/netfilter/nf_tables_api.c function in the Linux kernel. This flaw allows a local, privileged attacker to cause a use-after-free problem at the time of table deletion, possibly leading to local privilege escalation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-2586"
    },
    {
      "cve": "CVE-2022-2588",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Zhenpeng Lin discovered that the network packet scheduler implementation in the Linux kernel did not properly remove all references to a route filter before freeing it in some situations. A local attacker could use this to cause a denial of service (system crash) or execute arbitrary code.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-2588"
    },
    {
      "cve": "CVE-2022-2602",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel. A race issue occurs between an io_uring request and the Unix socket garbage collector, allowing an attacker local privilege escalation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-2602"
    },
    {
      "cve": "CVE-2022-2663",
      "cwe": {
        "id": "CWE-923",
        "name": "Improper Restriction of Communication Channel to Intended Endpoints"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was found in the Linux kernel in nf_conntrack_irc where the message handling can be confused and incorrectly matches the message. A firewall may be able to be bypassed when users are using unencrypted IRC with nf_conntrack_irc configured.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-2663"
    },
    {
      "cve": "CVE-2022-2905",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds memory read flaw was found in the Linux kernel\u0027s BPF subsystem in how a user calls the bpf_tail_call function with a key larger than the max_entries of the map. This flaw allows a local user to gain unauthorized access to data.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-2905"
    },
    {
      "cve": "CVE-2022-2959",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A race condition was found in the Linux kernel\u0027s watch queue due to a missing lock in pipe_resize_ring(). The specific flaw exists within the handling of pipe buffers. The issue results from the lack of proper locking when performing operations on an object. This flaw allows a local user to crash the system or escalate their privileges on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-2959"
    },
    {
      "cve": "CVE-2022-2978",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw use after free in the Linux kernel NILFS file system was found in the way user triggers function security_inode_alloc to fail with following call to function nilfs_mdt_destroy. A local user could use this flaw to crash the system or potentially escalate their privileges on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-2978"
    },
    {
      "cve": "CVE-2022-3028",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A race condition was found in the Linux kernel\u0027s IP framework for transforming packets (XFRM subsystem) when multiple calls to xfrm_probe_algs occurred simultaneously. This flaw could allow a local attacker to potentially trigger an out-of-bounds write or leak kernel heap memory by performing an out-of-bounds read and copying it into a socket.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-3028"
    },
    {
      "cve": "CVE-2022-3104",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel through 5.16-rc6. lkdtm_ARRAY_BOUNDS in drivers/misc/lkdtm/bugs.c lacks check of the return value of kmalloc() and will cause the null pointer dereference.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-3104"
    },
    {
      "cve": "CVE-2022-3115",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel through 5.16-rc6. malidp_crtc_reset in drivers/gpu/drm/arm/malidp_crtc.c lacks check of the return value of kzalloc() and will cause the null pointer dereference.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-3115"
    },
    {
      "cve": "CVE-2022-3169",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel. A denial of service flaw may occur if there is a consecutive request of the NVME_IOCTL_RESET and the NVME_IOCTL_SUBSYS_RESET through the device file of the driver, resulting in a PCIe link disconnect.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-3169"
    },
    {
      "cve": "CVE-2022-3303",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A race condition flaw was found in the Linux kernel sound subsystem due to improper locking. It could lead to a NULL pointer dereference while handling the SNDCTL_DSP_SYNC ioctl. A privileged local user (root or member of the audio group) could use this flaw to crash the system, resulting in a denial of service condition",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-3303"
    },
    {
      "cve": "CVE-2022-3521",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability has been found in Linux Kernel and classified as problematic. This vulnerability affects the function kcm_tx_work of the file net/kcm/kcmsock.c of the component kcm. The manipulation leads to race condition. It is recommended to apply a patch to fix this issue. VDB-211018 is the identifier assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 2.5,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-3521"
    },
    {
      "cve": "CVE-2022-3524",
      "cwe": {
        "id": "CWE-404",
        "name": "Improper Resource Shutdown or Release"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in Linux Kernel. It has been declared as problematic. Affected by this vulnerability is the function ipv6_renew_options of the component IPv6 Handler. The manipulation leads to memory leak. The attack can be launched remotely. It is recommended to apply a patch to fix this issue. The identifier VDB-211021 was assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-3524"
    },
    {
      "cve": "CVE-2022-3534",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability classified as critical has been found in Linux Kernel. Affected is the function btf_dump_name_dups of the file tools/lib/bpf/btf_dump.c of the component libbpf. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-211032.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-3534"
    },
    {
      "cve": "CVE-2022-3545",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability has been found in Linux Kernel and classified as critical. Affected by this vulnerability is the function area_cache_get of the file drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c of the component IPsec. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. The identifier VDB-211045 was assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-3545"
    },
    {
      "cve": "CVE-2022-3564",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability classified as critical was found in Linux Kernel. Affected by this vulnerability is the function l2cap_reassemble_sdu of the file net/bluetooth/l2cap_core.c of the component Bluetooth. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-211087.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:A/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-3564"
    },
    {
      "cve": "CVE-2022-3565",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability, which was classified as critical, has been found in Linux Kernel. Affected by this issue is the function del_timer of the file drivers/isdn/mISDN/l1oip_core.c of the component Bluetooth. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-211088.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-3565"
    },
    {
      "cve": "CVE-2022-3586",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel\u2019s networking code. A use-after-free was found in the way the sch_sfb enqueue function used the socket buffer (SKB) cb field after the same SKB had been enqueued (and freed) into a child qdisc. This flaw allows a local, unprivileged user to crash the system, causing a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-3586"
    },
    {
      "cve": "CVE-2022-3594",
      "cwe": {
        "id": "CWE-404",
        "name": "Improper Resource Shutdown or Release"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in Linux Kernel. It has been declared as problematic. Affected by this vulnerability is the function intr_callback of the file drivers/net/usb/r8152.c of the component BPF. The manipulation leads to logging of excessive data. The attack can be launched remotely. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-211363.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-3594"
    },
    {
      "cve": "CVE-2022-3606",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in Linux Kernel. It has been classified as problematic. This affects the function find_prog_by_sec_insn of the file tools/lib/bpf/libbpf.c of the component BPF. The manipulation leads to null pointer dereference. It is recommended to apply a patch to fix this issue. The identifier VDB-211749 was assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-3606"
    },
    {
      "cve": "CVE-2022-3621",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in Linux Kernel. It has been classified as problematic. Affected is the function nilfs_bmap_lookup_at_level of the file fs/nilfs2/inode.c of the component nilfs2. The manipulation leads to null pointer dereference. It is possible to launch the attack remotely. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-211920.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-3621"
    },
    {
      "cve": "CVE-2022-3625",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in Linux Kernel. It has been classified as critical. This affects the function devlink_param_set/devlink_param_get of the file net/core/devlink.c of the component IPsec. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. The identifier VDB-211929 was assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-3625"
    },
    {
      "cve": "CVE-2022-3628",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A buffer overflow flaw was found in the Linux kernel Broadcom Full MAC Wi-Fi driver. This issue occurs when a user connects to a malicious USB device. This can allow a local user to crash the system or escalate their privileges.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.6,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:P/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-3628"
    },
    {
      "cve": "CVE-2022-3629",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in Linux Kernel. It has been declared as problematic. This vulnerability affects the function vsock_connect of the file net/vmw_vsock/af_vsock.c. The manipulation leads to memory leak. It is recommended to apply a patch to fix this issue. VDB-211930 is the identifier assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-3629"
    },
    {
      "cve": "CVE-2022-3633",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability classified as problematic has been found in Linux Kernel. Affected is the function j1939_session_destroy of the file net/can/j1939/transport.c. The manipulation leads to memory leak. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-211932.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-3633"
    },
    {
      "cve": "CVE-2022-3635",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability, which was classified as critical, has been found in Linux Kernel. Affected by this issue is the function tst_timer of the file drivers/atm/idt77252.c of the component IPsec. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. VDB-211934 is the identifier assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-3635"
    },
    {
      "cve": "CVE-2022-3646",
      "cwe": {
        "id": "CWE-404",
        "name": "Improper Resource Shutdown or Release"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability, which was classified as problematic, has been found in Linux Kernel. This issue affects the function nilfs_attach_log_writer of the file fs/nilfs2/segment.c of the component BPF. The manipulation leads to memory leak. The attack may be initiated remotely. It is recommended to apply a patch to fix this issue. The identifier VDB-211961 was assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-3646"
    },
    {
      "cve": "CVE-2022-3649",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in Linux Kernel. It has been classified as problematic. Affected is the function nilfs_new_inode of the file fs/nilfs2/inode.c of the component BPF. The manipulation leads to use after free. It is possible to launch the attack remotely. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-211992.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-3649"
    },
    {
      "cve": "CVE-2022-4095",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free flaw was found in Linux kernel before 5.19.2. This issue occurs in cmd_hdl_filter in drivers/staging/rtl8712/rtl8712_cmd.c, allowing an attacker to launch a local denial of service attack and gain escalation of privileges.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-4095"
    },
    {
      "cve": "CVE-2022-4129",
      "cwe": {
        "id": "CWE-667",
        "name": "Improper Locking"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel\u0027s Layer 2 Tunneling Protocol (L2TP). A missing lock when clearing sk_user_data can lead to a race condition and NULL pointer dereference. A local user could use this flaw to potentially crash the system causing a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-4129"
    },
    {
      "cve": "CVE-2022-4139",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An incorrect TLB flush issue was found in the Linux kernel\u2019s GPU i915 kernel driver, potentially leading to random memory corruption or data leaks. This flaw could allow a local user to crash the system or escalate their privileges on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-4139"
    },
    {
      "cve": "CVE-2022-4269",
      "cwe": {
        "id": "CWE-833",
        "name": "Deadlock"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel Traffic Control (TC) subsystem. Using a specific networking configuration (redirecting egress packets to ingress using TC action \"mirred\") a local unprivileged user could trigger a CPU soft lockup (ABBA deadlock) when the transport protocol in use (TCP or SCTP) does a retransmission, resulting in a denial of service condition.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-4269"
    },
    {
      "cve": "CVE-2022-4304",
      "cwe": {
        "id": "CWE-326",
        "name": "Inadequate Encryption Strength"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A timing based side channel exists in the OpenSSL RSA Decryption implementation which could be sufficient to recover a plaintext across a network in a Bleichenbacher style attack. To achieve a successful decryption an attacker would have to be able to send a very large number of trial messages for decryption. The vulnerability affects all RSA padding modes: PKCS#1 v1.5, RSA-OEAP and RSASVE. For example, in a TLS connection, RSA is commonly used by a client to send an encrypted pre-master secret to the server. An attacker that had observed a genuine connection between a client and a server could use this flaw to send trial messages to the server and record the time taken to process them. After a sufficiently large number of messages the attacker could recover the pre-master secret used for the original connection and thus be able to decrypt the application data sent over that connection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-4304"
    },
    {
      "cve": "CVE-2022-4450",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The function PEM_read_bio_ex() reads a PEM file from a BIO and parses and decodes the \"name\" (e.g. \"CERTIFICATE\"), any header data and the payload data. If the function succeeds then the \"name_out\", \"header\" and \"data\" arguments are populated with pointers to buffers containing the relevant decoded data. The caller is responsible for freeing those buffers. It is possible to construct a PEM file that results in 0 bytes of payload data. In this case PEM_read_bio_ex() will return a failure code but will populate the header argument with a pointer to a buffer that has already been freed. If the caller also frees this buffer then a double free will occur. This will most likely lead to a crash. This could be exploited by an attacker who has the ability to supply malicious PEM files for parsing to achieve a denial of service attack. The functions PEM_read_bio() and PEM_read() are simple wrappers around PEM_read_bio_ex() and therefore these functions are also directly affected. These functions are also called indirectly by a number of other OpenSSL functions including PEM_X509_INFO_read_bio_ex() and SSL_CTX_use_serverinfo_file() which are also vulnerable. Some OpenSSL internal uses of these functions are not vulnerable because the caller does not free the header argument if PEM_read_bio_ex() returns a failure code. These locations include the PEM_read_bio_TYPE() functions as well as the decoders introduced in OpenSSL 3.0. The OpenSSL asn1parse command line application is also impacted by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-4450"
    },
    {
      "cve": "CVE-2022-4662",
      "cwe": {
        "id": "CWE-455",
        "name": "Non-exit on Failed Initialization"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw incorrect access control in the Linux kernel USB core subsystem was found in the way user attaches usb device. A local user could use this flaw to crash the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-4662"
    },
    {
      "cve": "CVE-2022-20421",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In binder_inc_ref_for_node of binder.c, there is a possible way to corrupt memory due to a use after free. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android kernelAndroid ID: A-239630375References: Upstream kernel",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-20421"
    },
    {
      "cve": "CVE-2022-20422",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In emulation_proc_handler of armv8_deprecated.c, there is a possible way to corrupt memory due to a race condition. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android kernelAndroid ID: A-237540956References: Upstream kernel",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-20422"
    },
    {
      "cve": "CVE-2022-20566",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In l2cap_chan_put of l2cap_core, there is a possible use after free due to improper locking. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android kernelAndroid ID: A-165329981References: Upstream kernel",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-20566"
    },
    {
      "cve": "CVE-2022-20572",
      "cwe": {
        "id": "CWE-863",
        "name": "Incorrect Authorization"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In verity_target of dm-verity-target.c, there is a possible way to modify read-only files due to a missing permission check. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android kernelAndroid ID: A-234475629References: Upstream kernel",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-20572"
    },
    {
      "cve": "CVE-2022-21123",
      "cwe": {
        "id": "CWE-459",
        "name": "Incomplete Cleanup"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Incomplete cleanup of multi-core shared buffers for some Intel(R) Processors may allow an authenticated user to potentially enable information disclosure via local access.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-21123"
    },
    {
      "cve": "CVE-2022-21125",
      "cwe": {
        "id": "CWE-459",
        "name": "Incomplete Cleanup"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Incomplete cleanup of microarchitectural fill buffers on some Intel(R) Processors may allow an authenticated user to potentially enable information disclosure via local access.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-21125"
    },
    {
      "cve": "CVE-2022-21166",
      "cwe": {
        "id": "CWE-459",
        "name": "Incomplete Cleanup"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Incomplete cleanup in specific special register write operations for some Intel(R) Processors may allow an authenticated user to potentially enable information disclosure via local access.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-21166"
    },
    {
      "cve": "CVE-2022-21505",
      "cwe": {
        "id": "CWE-305",
        "name": "Authentication Bypass by Primary Weakness"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A bug in the IMA subsystem was discovered which would incorrectly allow kexec to be used when kernel lockdown was enabled",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-21505"
    },
    {
      "cve": "CVE-2022-26373",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Non-transparent sharing of return predictor targets between contexts in some Intel(R) Processors may allow an authorized user to potentially enable information disclosure via local access.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-26373"
    },
    {
      "cve": "CVE-2022-32250",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "net/netfilter/nf_tables_api.c in the Linux kernel through 5.18.1 allows a local user (able to create user/net namespaces) to escalate privileges to root because an incorrect NFT_STATEFUL_EXPR check leads to a use-after-free.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-32250"
    },
    {
      "cve": "CVE-2022-32296",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The Linux kernel before 5.17.9 allows TCP servers to identify clients by observing what source ports are used. This occurs because of use of Algorithm 4 (\"Double-Hash Port Selection Algorithm\") of RFC 6056.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-32296"
    },
    {
      "cve": "CVE-2022-34918",
      "cwe": {
        "id": "CWE-843",
        "name": "Access of Resource Using Incompatible Type (\u0027Type Confusion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel through 5.18.9. A type confusion bug in nft_set_elem_init (leading to a buffer overflow) could be used by a local attacker to escalate privileges, a different vulnerability than CVE-2022-32250. (The attacker can obtain root access, but must start with an unprivileged user namespace to obtain CAP_NET_ADMIN access.) This can be fixed in nft_setelem_parse_data in net/netfilter/nf_tables_api.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-34918"
    },
    {
      "cve": "CVE-2022-36123",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The Linux kernel before 5.18.13 lacks a certain clear operation for the block starting symbol (.bss). This allows Xen PV guest OS users to cause a denial of service or gain privileges.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-36123"
    },
    {
      "cve": "CVE-2022-36280",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds(OOB) memory access vulnerability was found in vmwgfx driver in drivers/gpu/vmxgfx/vmxgfx_kms.c in GPU component in the Linux kernel with device file \u0027/dev/dri/renderD128 (or Dxxx)\u0027. This flaw allows a local attacker with a user account on the system to gain privilege, causing a denial of service(DoS).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-36280"
    },
    {
      "cve": "CVE-2022-36879",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel through 5.18.14. xfrm_expand_policies in net/xfrm/xfrm_policy.c can cause a refcount to be dropped twice.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-36879"
    },
    {
      "cve": "CVE-2022-36946",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nfqnl_mangle in net/netfilter/nfnetlink_queue.c in the Linux kernel through 5.18.14 allows remote attackers to cause a denial of service (panic) because, in the case of an nf_queue verdict with a one-byte nfta_payload attribute, an skb_pull can encounter a negative skb-\u003elen.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-36946"
    },
    {
      "cve": "CVE-2022-39188",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in include/asm-generic/tlb.h in the Linux kernel before 5.19. Because of a race condition (unmap_mapping_range versus munmap), a device driver can free a page while it still has stale TLB entries. This only occurs in situations with VM_PFNMAP VMAs.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-39188"
    },
    {
      "cve": "CVE-2022-39190",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in net/netfilter/nf_tables_api.c in the Linux kernel before 5.19.6. A denial of service can occur upon binding to an already bound chain.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-39190"
    },
    {
      "cve": "CVE-2022-40307",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel through 5.19.8. drivers/firmware/efi/capsule-loader.c has a race condition with a resultant use-after-free.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-40307"
    },
    {
      "cve": "CVE-2022-40768",
      "cwe": {
        "id": "CWE-668",
        "name": "Exposure of Resource to Wrong Sphere"
      },
      "notes": [
        {
          "category": "summary",
          "text": "drivers/scsi/stex.c in the Linux kernel through 5.19.9 allows local users to obtain sensitive information from kernel memory because stex_queuecommand_lck lacks a memset for the PASSTHRU_CMD case.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-40768"
    },
    {
      "cve": "CVE-2022-41218",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In drivers/media/dvb-core/dmxdev.c in the Linux kernel through 5.19.10, there is a use-after-free caused by refcount races, affecting dvb_demux_open and dvb_dmxdev_release.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-41218"
    },
    {
      "cve": "CVE-2022-41222",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "mm/mremap.c in the Linux kernel before 5.13.3 has a use-after-free via a stale TLB because an rmap lock is not held during a PUD move.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-41222"
    },
    {
      "cve": "CVE-2022-41674",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel before 5.19.16. Attackers able to inject WLAN frames could cause a buffer overflow in the ieee80211_bss_info_update function in net/mac80211/scan.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-41674"
    },
    {
      "cve": "CVE-2022-41849",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "drivers/video/fbdev/smscufx.c in the Linux kernel through 5.19.12 has a race condition and resultant use-after-free if a physically proximate attacker removes a USB device while calling open(), aka a race condition between ufx_ops_open and ufx_usb_disconnect.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.2,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:P/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-41849"
    },
    {
      "cve": "CVE-2022-41850",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "roccat_report_event in drivers/hid/hid-roccat.c in the Linux kernel through 5.19.12 has a race condition and resultant use-after-free in certain situations where a report is received while copying a report-\u003evalue is in progress.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-41850"
    },
    {
      "cve": "CVE-2022-42328",
      "cwe": {
        "id": "CWE-667",
        "name": "Improper Locking"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Guests can trigger deadlock in Linux netback driver [This CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] The patch for XSA-392 introduced another issue which might result in a deadlock when trying to free the SKB of a packet dropped due to the XSA-392 handling (CVE-2022-42328). Additionally when dropping packages for other reasons the same deadlock could occur in case of netpoll being active for the interface the xen-netback driver is connected to (CVE-2022-42329).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-42328"
    },
    {
      "cve": "CVE-2022-42329",
      "cwe": {
        "id": "CWE-667",
        "name": "Improper Locking"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Guests can trigger deadlock in Linux netback drive. The patch for XSA-392 introduced another issue which might result in a deadlock when trying to free the SKB of a packet dropped due to the XSA-392 handling (CVE-2022-42328). Additionally when dropping packages for other reasons the same deadlock could occur in case of netpoll being active for the interface the xen-netback driver is connected to (CVE-2022-42329).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-42329"
    },
    {
      "cve": "CVE-2022-42432",
      "cwe": {
        "id": "CWE-457",
        "name": "Use of Uninitialized Variable"
      },
      "notes": [
        {
          "category": "summary",
          "text": "This vulnerability allows local attackers to disclose sensitive information on affected installations of the Linux Kernel 6.0-rc2. An attacker must first obtain the ability to execute high-privileged code on the target system in order to exploit this vulnerability. The specific flaw exists within the nft_osf_eval function. The issue results from the lack of proper initialization of memory prior to accessing it. An attacker can leverage this in conjunction with other vulnerabilities to execute arbitrary code in the context of the kernel. Was ZDI-CAN-18540.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-42432"
    },
    {
      "cve": "CVE-2022-42703",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "mm/rmap.c in the Linux kernel before 5.19.7 has a use-after-free related to leaf anon_vma double reuse.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-42703"
    },
    {
      "cve": "CVE-2022-42719",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free in the mac80211 stack when parsing a multi-BSSID element in the Linux kernel 5.2 through 5.19.x before 5.19.16 could be used by attackers (able to inject WLAN frames) to crash the kernel and potentially execute code.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-42719"
    },
    {
      "cve": "CVE-2022-42720",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Various refcounting bugs in the multi-BSS handling in the mac80211 stack in the Linux kernel 5.1 through 5.19.x before 5.19.16 could be used by local attackers (able to inject WLAN frames) to trigger use-after-free conditions to potentially execute code.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-42720"
    },
    {
      "cve": "CVE-2022-42721",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A list management bug in BSS handling in the mac80211 stack in the Linux kernel 5.1 through 5.19.x before 5.19.16 could be used by local attackers (able to inject WLAN frames) to corrupt a linked list and, in turn, potentially execute code.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-42721"
    },
    {
      "cve": "CVE-2022-42722",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel 5.8 through 5.19.x before 5.19.16, local attackers able to inject WLAN frames into the mac80211 stack could cause a NULL pointer dereference denial-of-service attack against the beacon protection of P2P devices.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-42722"
    },
    {
      "cve": "CVE-2022-42895",
      "cwe": {
        "id": "CWE-824",
        "name": "Access of Uninitialized Pointer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is an infoleak vulnerability in the Linux kernel\u0027s net/bluetooth/l2cap_core.c\u0027s l2cap_parse_conf_req function which can be used to leak kernel pointers remotely. We recommend upgrading past commit https://github.com/torvalds/linux/commit/b1a2cd50c0357f243b7435a732b4e62ba3157a2e",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-42895"
    },
    {
      "cve": "CVE-2022-42896",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There are use-after-free vulnerabilities in the Linux kernel\u0027s net/bluetooth/l2cap_core.c\u0027s l2cap_connect and l2cap_le_connect_req functions which may allow code execution and leaking kernel memory (respectively) remotely via Bluetooth. A remote attacker could execute code leaking kernel memory via Bluetooth if within proximity of the victim. We recommend upgrading past commit https://github.com/torvalds/linux/commit/711f8c3fb3db61897080468586b970c87c61d9e4",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-42896"
    },
    {
      "cve": "CVE-2022-43750",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "drivers/usb/mon/mon_bin.c in usbmon in the Linux kernel before 5.19.15 and 6.x before 6.0.1 allows a user-space client to corrupt the monitor\u0027s internal memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-43750"
    },
    {
      "cve": "CVE-2022-47518",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel before 6.0.11. Missing validation of the number of channels in drivers/net/wireless/microchip/wilc1000/cfg80211.c in the WILC1000 wireless driver can trigger a heap-based buffer overflow when copying the list of operating channels from Wi-Fi management frames.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-47518"
    },
    {
      "cve": "CVE-2022-47520",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel before 6.0.11. Missing offset validation in drivers/net/wireless/microchip/wilc1000/hif.c in the WILC1000 wireless driver can trigger an out-of-bounds read when parsing a Robust Security Network (RSN) information element from a Netlink packet.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-47520"
    },
    {
      "cve": "CVE-2022-47929",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel before 6.1.6, a NULL pointer dereference bug in the traffic control subsystem allows an unprivileged user to trigger a denial of service (system crash) via a crafted traffic control configuration that is set up with \"tc qdisc\" and \"tc class\" commands. This affects qdisc_graft in net/sched/sch_api.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-47929"
    },
    {
      "cve": "CVE-2022-47946",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel 5.10.x before 5.10.155. A use-after-free in io_sqpoll_wait_sq in fs/io_uring.c allows an attacker to crash the kernel, resulting in denial of service. finish_wait can be skipped. An attack can occur in some situations by forking a process and then quickly terminating it. NOTE: later kernel versions, such as the 5.15 longterm series, substantially changed the implementation of io_sqpoll_wait_sq.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-47946"
    },
    {
      "cve": "CVE-2023-0215",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The public API function BIO_new_NDEF is a helper function used for streaming ASN.1 data via a BIO. It is primarily used internally to OpenSSL to support the SMIME, CMS and PKCS7 streaming capabilities, but may also be called directly by end user applications. The function receives a BIO from the caller, prepends a new BIO_f_asn1 filter BIO onto the front of it to form a BIO chain, and then returns the new head of the BIO chain to the caller. Under certain conditions, for example if a CMS recipient public key is invalid, the new filter BIO is freed and the function returns a NULL result indicating a failure. However, in this case, the BIO chain is not properly cleaned up and the BIO passed by the caller still retains internal pointers to the previously freed filter BIO. If the caller then goes on to call BIO_pop() on the BIO then a use-after-free will occur. This will most likely result in a crash. This scenario occurs directly in the internal function B64_write_ASN1() which may cause BIO_new_NDEF() to be called and will subsequently call BIO_pop() on the BIO. This internal function is in turn called by the public API functions PEM_write_bio_ASN1_stream, PEM_write_bio_CMS_stream, PEM_write_bio_PKCS7_stream, SMIME_write_ASN1, SMIME_write_CMS and SMIME_write_PKCS7. Other public API functions that may be impacted by this include i2d_ASN1_bio_stream, BIO_new_CMS, BIO_new_PKCS7, i2d_CMS_bio_stream and i2d_PKCS7_bio_stream. The OpenSSL cms and smime command line applications are similarly affected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-0215"
    },
    {
      "cve": "CVE-2023-0286",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a type confusion vulnerability relating to X.400 address processing inside an X.509 GeneralName. X.400 addresses were parsed as an ASN1_STRING but the public structure definition for GENERAL_NAME incorrectly specified the type of the x400Address field as ASN1_TYPE. This field is subsequently interpreted by the OpenSSL function GENERAL_NAME_cmp as an ASN1_TYPE rather than an ASN1_STRING. When CRL checking is enabled (i.e. the application sets the X509_V_FLAG_CRL_CHECK flag), this vulnerability may allow an attacker to pass arbitrary pointers to a memcmp call, enabling them to read memory contents or enact a denial of service. In most cases, the attack requires the attacker to provide both the certificate chain and CRL, neither of which need to have a valid signature. If the attacker only controls one of these inputs, the other input must already contain an X.400 address as a CRL distribution point, which is uncommon. As such, this vulnerability is most likely to only affect applications which have implemented their own functionality for retrieving CRLs over a network.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-0286"
    },
    {
      "cve": "CVE-2023-0464",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A security vulnerability has been identified in all supported versions of OpenSSL related to the verification of X.509 certificate chains that include policy constraints. Attackers may be able to exploit this vulnerability by creating a malicious certificate chain that triggers exponential use of computational resources, leading to a denial-of-service (DoS) attack on affected systems.\r\n\r\nPolicy processing is disabled by default but can be enabled by passing the `-policy` argument to the command line utilities or by calling the `X509_VERIFY_PARAM_set1_policies()` function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-0464"
    },
    {
      "cve": "CVE-2023-0465",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Applications that use a non-default option when verifying certificates may be\r\nvulnerable to an attack from a malicious CA to circumvent certain checks.\r\n\r\nInvalid certificate policies in leaf certificates are silently ignored by\r\nOpenSSL and other certificate policy checks are skipped for that certificate.\r\nA malicious CA could use this to deliberately assert invalid certificate policies\r\nin order to circumvent policy checking on the certificate altogether.\r\n\r\nPolicy processing is disabled by default but can be enabled by passing\r\nthe `-policy` argument to the command line utilities or by calling the\r\n`X509_VERIFY_PARAM_set1_policies()` function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-0465"
    },
    {
      "cve": "CVE-2023-0466",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The function X509_VERIFY_PARAM_add0_policy() is documented to\nimplicitly enable the certificate policy check when doing certificate\nverification. However the implementation of the function does not\nenable the check which allows certificates with invalid or incorrect\npolicies to pass the certificate verification.\n\nAs suddenly enabling the policy check could break existing deployments it was\ndecided to keep the existing behavior of the X509_VERIFY_PARAM_add0_policy()\nfunction.\n\nInstead the applications that require OpenSSL to perform certificate\npolicy check need to use X509_VERIFY_PARAM_set1_policies() or explicitly\nenable the policy check by calling X509_VERIFY_PARAM_set_flags() with\nthe X509_V_FLAG_POLICY_CHECK flag argument.\n\nCertificate policy checks are disabled by default in OpenSSL and are not\ncommonly used by applications.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-0466"
    },
    {
      "cve": "CVE-2023-0590",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free flaw was found in qdisc_graft in net/sched/sch_api.c in the Linux Kernel due to a race problem. This flaw leads to a denial of service issue. If patch ebda44da44f6 (\"net: sched: fix race condition in qdisc_graft()\") not applied yet, then kernel could be affected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-0590"
    },
    {
      "cve": "CVE-2023-1077",
      "cwe": {
        "id": "CWE-843",
        "name": "Access of Resource Using Incompatible Type (\u0027Type Confusion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, pick_next_rt_entity() may return a type confused entry, not detected by the BUG_ON condition, as the confused entry will not be NULL, but list_head.The buggy error condition would lead to a type confused entry with the list head,which would then be used as a type confused sched_rt_entity,causing memory corruption.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-1077"
    },
    {
      "cve": "CVE-2023-1095",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In nf_tables_updtable, if nf_tables_table_enable returns an error, nft_trans_destroy is called to free the transaction object. nft_trans_destroy() calls list_del(), but the transaction was never placed on a list -- the list head is all zeroes, this results in a NULL pointer dereference.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-1095"
    },
    {
      "cve": "CVE-2023-1206",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A hash collision flaw was found in the IPv6 connection lookup table in the Linux kernel\u2019s IPv6 functionality when a user makes a new kind of SYN flood attack. A user located in the local network or with a high bandwidth connection can increase the CPU usage of the server that accepts IPV6 connections up to 95%.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-1206"
    },
    {
      "cve": "CVE-2023-2898",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a null-pointer-dereference flaw found in f2fs_write_end_io in fs/f2fs/data.c in the Linux kernel. This flaw allows a local privileged user to cause a denial of service problem.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-2898"
    },
    {
      "cve": "CVE-2023-3141",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free flaw was found in r592_remove in drivers/memstick/host/r592.c in media access in the Linux Kernel. This flaw allows a local attacker to crash the system at device disconnect, possibly leading to a kernel information leak.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-3141"
    },
    {
      "cve": "CVE-2023-3268",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out of bounds (OOB) memory access flaw was found in the Linux kernel in relay_file_read_start_pos in kernel/relay.c in the relayfs. This flaw could allow a local attacker to crash the system or leak kernel internal information.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-3268"
    },
    {
      "cve": "CVE-2023-3338",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A null pointer dereference flaw was found in the Linux kernel\u0027s DECnet networking protocol. This issue could allow a remote user to crash the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-3338"
    },
    {
      "cve": "CVE-2023-3389",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux Kernel io_uring subsystem can be exploited to achieve local privilege escalation. Racing a io_uring cancel poll request with a linked timeout can cause a UAF in a hrtimer.\r\n\r\nWe recommend upgrading past commit `ef7dfac51d8ed961b742218f526bd589f3900a59`  \r\n(`4716c73b188566865bdd79c3a6709696a224ac04` for 5.10 stable and   \r\n`0e388fce7aec40992eadee654193cad345d62663` for 5.15 stable).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-3389"
    },
    {
      "cve": "CVE-2023-3446",
      "cwe": {
        "id": "CWE-1333",
        "name": "Inefficient Regular Expression Complexity"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. One of those checks confirms that the modulus (\u0027p\u0027 parameter) is not too large. Trying to use a very large modulus is slow and OpenSSL will not normally use a modulus which is over 10,000 bits in length. However the DH_check() function checks numerous aspects of the key or parameters that have been supplied. Some of those checks use the supplied modulus value even if it has already been found to be too large. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulernable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the \u0027-check\u0027 option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-3446"
    },
    {
      "cve": "CVE-2023-3609",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s net/sched: cls_u32 component can be exploited to achieve local privilege escalation.\r\n\r\nIf tcf_change_indev() fails, u32_set_parms() will immediately return an error after incrementing or decrementing the reference counter in tcf_bind_filter(). If an attacker can control the reference counter and set it to zero, they can cause the reference to be freed, leading to a use-after-free vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-3609"
    },
    {
      "cve": "CVE-2023-3610",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s netfilter: nf_tables component can be exploited to achieve local privilege escalation.\r\n\r\nFlaw in the error handling of bound chains causes a use-after-free in the abort path of NFT_MSG_NEWRULE. The vulnerability requires CAP_NET_ADMIN to be triggered.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-3610"
    },
    {
      "cve": "CVE-2023-3611",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds write vulnerability in the Linux kernel\u0027s net/sched: sch_qfq component can be exploited to achieve local privilege escalation.\r\n\r\nThe qfq_change_agg() function in net/sched/sch_qfq.c allows an out-of-bounds write because lmax is updated according to packet sizes without bounds checks.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-3611"
    },
    {
      "cve": "CVE-2023-3772",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel\u0027s IP framework for transforming packets (XFRM subsystem). This issue may allow a malicious user with CAP_NET_ADMIN privileges to directly dereference a NULL pointer in xfrm_update_ae_params(), leading to a possible kernel crash and denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-3772"
    },
    {
      "cve": "CVE-2023-3773",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel\u0027s IP framework for transforming packets (XFRM subsystem). This issue may allow a malicious user with CAP_NET_ADMIN privileges to cause a 4 byte out-of-bounds read of XFRMA_MTIMER_THRESH when parsing netlink attributes, leading to potential leakage of sensitive heap data to userspace.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-3773"
    },
    {
      "cve": "CVE-2023-3777",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s netfilter: nf_tables component can be exploited to achieve local privilege escalation.\n\nWhen nf_tables_delrule() is flushing table rules, it is not checked whether the chain is bound and the chain\u0027s owner rule can also release the objects in certain circumstances.\n\nWe recommend upgrading past commit 6eaf41e87a223ae6f8e7a28d6e78384ad7e407f8.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-3777"
    },
    {
      "cve": "CVE-2023-4004",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free flaw was found in the Linux kernel\u0027s netfilter in the way a user triggers the nft_pipapo_remove function with the element, without a NFT_SET_EXT_KEY_END. This issue could allow a local user to crash the system or potentially escalate their privileges on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-4004"
    },
    {
      "cve": "CVE-2023-4015",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The netfilter subsystem in the Linux kernel did not properly handle bound chain deactivation in certain circumstances. A local attacker could possibly use this to cause a denial of service (system crash) or execute arbitrary code.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-4015"
    },
    {
      "cve": "CVE-2023-4273",
      "cwe": {
        "id": "CWE-121",
        "name": "Stack-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "This vulnerability exists in the implementation of the file name reconstruction function, which is responsible for reading file name entries from a directory index and merging file name parts belonging to one file into a single long file name. Since the file name characters are copied into a stack variable, a local privileged attacker could use this vulnerability to overflow the kernel stack.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.0,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-4273"
    },
    {
      "cve": "CVE-2023-4623",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s net/sched: sch_hfsc (HFSC qdisc traffic control) component can be exploited to achieve local privilege escalation.\n\nIf a class with a link-sharing curve (i.e. with the HFSC_FSC flag set) has a parent without a link-sharing curve, then init_vf() will call vttree_insert() on the parent, but vttree_remove() will be skipped in update_vf(). This leaves a dangling pointer that can cause a use-after-free.\n\nWe recommend upgrading past commit b3d26c5702c7d6c45456326e56d2ccf3f103e60f.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-4623"
    },
    {
      "cve": "CVE-2023-4911",
      "cwe": {
        "id": "CWE-121",
        "name": "Stack-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A buffer overflow was discovered in the GNU C Library\u0027s dynamic loader ld.so while processing the GLIBC_TUNABLES environment variable. This issue could allow a local attacker to use maliciously crafted GLIBC_TUNABLES environment variables when launching binaries with SUID permission to execute code with elevated privileges.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-4911"
    },
    {
      "cve": "CVE-2023-4921",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s net/sched: sch_qfq component can be exploited to achieve local privilege escalation.\n\nWhen the plug qdisc is used as a class of the qfq qdisc, sending network packets triggers use-after-free in qfq_dequeue() due to the incorrect .peek handler of sch_plug and lack of error checking in agg_dequeue().\n\nWe recommend upgrading past commit 8fc134fee27f2263988ae38920bc03da416b03d8.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-4921"
    },
    {
      "cve": "CVE-2023-5178",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability was found in drivers/nvme/target/tcp.c` in `nvmet_tcp_free_crypto` due to a logical bug in the NVMe-oF/TCP subsystem in the Linux kernel. This issue may allow a malicious local privileged user to cause a use-after-free and double-free problem, which may permit remote code execution or lead to local privilege escalation problem.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-5178"
    },
    {
      "cve": "CVE-2023-5197",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s netfilter: nf_tables component can be exploited to achieve local privilege escalation.\r\n\r\nAddition and removal of rules from chain bindings within the same transaction causes leads to use-after-free.\r\n\r\nWe recommend upgrading past commit f15f29fd4779be8a418b66e9d52979bb6d6c2325.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-5197"
    },
    {
      "cve": "CVE-2023-5678",
      "cwe": {
        "id": "CWE-754",
        "name": "Improper Check for Unusual or Exceptional Conditions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Generating excessively long X9.42 DH keys or checking excessively long X9.42 DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_generate_key() to generate an X9.42 DH key may experience long delays. Likewise, applications that use DH_check_pub_key(), DH_check_pub_key_ex() or EVP_PKEY_public_check() to check an X9.42 DH key or X9.42 DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. While DH_check() performs all the necessary checks (as of CVE-2023-3817), DH_check_pub_key() doesn\u0027t make any of these checks, and is therefore vulnerable for excessively large P and Q parameters. Likewise, while DH_generate_key() performs a check for an excessively large P, it doesn\u0027t check for an excessively large Q. An application that calls DH_generate_key() or DH_check_pub_key() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. DH_generate_key() and DH_check_pub_key() are also called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_pub_key_ex(), EVP_PKEY_public_check(), and EVP_PKEY_generate(). Also vulnerable are the OpenSSL pkey command line application when using the \"-pubcheck\" option, as well as the OpenSSL genpkey command line application. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-5678"
    },
    {
      "cve": "CVE-2023-5717",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A heap out-of-bounds write vulnerability in the Linux kernel\u0027s Linux Kernel Performance Events (perf) component can be exploited to achieve local privilege escalation.\r\n\r\nIf perf_read_group() is called while an event\u0027s sibling_list is smaller than its child\u0027s sibling_list, it can increment or write to memory locations outside of the allocated buffer.\r\n\r\nWe recommend upgrading past commit 32671e3799ca2e4590773fd0e63aaa4229e50c06.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-5717"
    },
    {
      "cve": "CVE-2023-6606",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds read vulnerability was found in smbCalcSize in fs/smb/client/netmisc.c in the Linux Kernel. This issue could allow a local attacker to crash the system or leak internal kernel information.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-6606"
    },
    {
      "cve": "CVE-2023-6931",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A heap out-of-bounds write vulnerability in the Linux kernel\u0027s Performance Events system component can be exploited to achieve local privilege escalation.\n\nA perf_event\u0027s read_size can overflow, leading to an heap out-of-bounds increment or write in perf_read_group().\n\nWe recommend upgrading past commit 382c27f4ed28f803b1f1473ac2d8db0afc795a1b.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-6931"
    },
    {
      "cve": "CVE-2023-6932",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s ipv4: igmp component can be exploited to achieve local privilege escalation.\n\nA race condition can be exploited to cause a timer be mistakenly registered on a RCU read locked object which is freed by another thread.\n\nWe recommend upgrading past commit e2b706c691905fe78468c361aaabc719d0a496f1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-6932"
    },
    {
      "cve": "CVE-2023-7008",
      "cwe": {
        "id": "CWE-300",
        "name": "Channel Accessible by Non-Endpoint"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in systemd-resolved. This issue may allow systemd-resolved to accept records of DNSSEC-signed domains even when they have no signature, allowing man-in-the-middles (or the upstream DNS resolver) to manipulate records.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-7008"
    },
    {
      "cve": "CVE-2023-7104",
      "cwe": {
        "id": "CWE-122",
        "name": "Heap-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in SQLite SQLite3 up to 3.43.0 and classified as critical. This issue affects the function sessionReadRecord of the file ext/session/sqlite3session.c of the component make alltest Handler. The manipulation leads to heap-based buffer overflow. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-248999.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-7104"
    },
    {
      "cve": "CVE-2023-23454",
      "cwe": {
        "id": "CWE-843",
        "name": "Access of Resource Using Incompatible Type (\u0027Type Confusion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "cbq_classify in net/sched/sch_cbq.c in the Linux kernel through 6.1.4 allows attackers to cause a denial of service (slab-out-of-bounds read) because of type confusion (non-negative numbers can sometimes indicate a TC_ACT_SHOT condition rather than valid classification results).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-23454"
    },
    {
      "cve": "CVE-2023-23455",
      "cwe": {
        "id": "CWE-843",
        "name": "Access of Resource Using Incompatible Type (\u0027Type Confusion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "atm_tc_enqueue in net/sched/sch_atm.c in the Linux kernel through 6.1.4 allows attackers to cause a denial of service because of type confusion (non-negative numbers can sometimes indicate a TC_ACT_SHOT condition rather than valid classification results).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-23455"
    },
    {
      "cve": "CVE-2023-23559",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In rndis_query_oid in drivers/net/wireless/rndis_wlan.c in the Linux kernel through 6.1.5, there is an integer overflow in an addition.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-23559"
    },
    {
      "cve": "CVE-2023-26607",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel 6.0.8, there is an out-of-bounds read in ntfs_attr_find in fs/ntfs/attrib.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-26607"
    },
    {
      "cve": "CVE-2023-31085",
      "cwe": {
        "id": "CWE-369",
        "name": "Divide By Zero"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in drivers/mtd/ubi/cdev.c in the Linux kernel 6.2. There is a divide-by-zero error in do_div(sz,mtd-\u003eerasesize), used indirectly by ctrl_cdev_ioctl, when mtd-\u003eerasesize is 0.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-31085"
    },
    {
      "cve": "CVE-2023-31436",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "qfq_change_class in net/sched/sch_qfq.c in the Linux kernel before 6.2.13 allows an out-of-bounds write because lmax can exceed QFQ_MIN_LMAX.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-31436"
    },
    {
      "cve": "CVE-2023-32233",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel through 6.3.1, a use-after-free in Netfilter nf_tables when processing batch requests can be abused to perform arbitrary read and write operations on kernel memory. Unprivileged local users can obtain root privileges. This occurs because anonymous sets are mishandled.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-32233"
    },
    {
      "cve": "CVE-2023-35001",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Linux Kernel nftables Out-Of-Bounds Read/Write Vulnerability; nft_byteorder poorly handled vm register contents when CAP_NET_ADMIN is in any user or network namespace",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-35001"
    },
    {
      "cve": "CVE-2023-35827",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel through 6.3.8. A use-after-free was found in ravb_remove in drivers/net/ethernet/renesas/ravb_main.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-35827"
    },
    {
      "cve": "CVE-2023-36660",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The OCB feature in libnettle in Nettle 3.9 before 3.9.1 allows memory corruption.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-36660"
    },
    {
      "cve": "CVE-2023-37453",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the USB subsystem in the Linux kernel through 6.4.2. There is an out-of-bounds and crash in read_descriptors in drivers/usb/core/sysfs.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.6,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:P/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-37453"
    },
    {
      "cve": "CVE-2023-39189",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Netfilter subsystem in the Linux kernel. The nfnl_osf_add_callback function did not validate the user mode controlled opt_num field. This flaw allows a local privileged (CAP_NET_ADMIN) attacker to trigger an out-of-bounds read, leading to a crash or information disclosure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-39189"
    },
    {
      "cve": "CVE-2023-39192",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Netfilter subsystem in the Linux kernel. The xt_u32 module did not validate the fields in the xt_u32 structure. This flaw allows a local privileged attacker to trigger an out-of-bounds read by setting the size fields with a value beyond the array boundaries, leading to a crash or information disclosure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:C/C:H/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-39192"
    },
    {
      "cve": "CVE-2023-39193",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Netfilter subsystem in the Linux kernel. The sctp_mt_check did not validate the flag_count field. This flaw allows a local privileged (CAP_NET_ADMIN) attacker to trigger an out-of-bounds read, leading to a crash or information disclosure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-39193"
    },
    {
      "cve": "CVE-2023-39194",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the XFRM subsystem in the Linux kernel. The specific flaw exists within the processing of state filters, which can result in a read past the end of an allocated buffer. This flaw allows a local privileged (CAP_NET_ADMIN) attacker to trigger an out-of-bounds read, potentially leading to an information disclosure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.2,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:C/C:L/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-39194"
    },
    {
      "cve": "CVE-2023-42753",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An array indexing vulnerability was found in the netfilter subsystem of the Linux kernel. A missing macro could lead to a miscalculation of the `h-\u003enets` array offset, providing attackers with the primitive to arbitrarily increment/decrement a memory buffer out-of-bound. This issue may allow a local user to crash the system or potentially escalate their privileges on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-42753"
    },
    {
      "cve": "CVE-2023-42754",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer dereference flaw was found in the Linux kernel ipv4 stack. The socket buffer (skb) was assumed to be associated with a device before calling __ip_options_compile, which is not always the case if the skb is re-routed by ipvs. This issue may allow a local user with CAP_NET_ADMIN privileges to crash the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-42754"
    },
    {
      "cve": "CVE-2023-42755",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the IPv4 Resource Reservation Protocol (RSVP) classifier in the Linux kernel. The xprt pointer may go beyond the linear part of the skb, leading to an out-of-bounds read in the `rsvp_classify` function. This issue may allow a local user to crash the system and cause a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-42755"
    },
    {
      "cve": "CVE-2023-45863",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in lib/kobject.c in the Linux kernel before 6.2.3. With root access, an attacker can trigger a race condition that results in a fill_kobj_path out-of-bounds write.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-45863"
    },
    {
      "cve": "CVE-2023-45871",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in drivers/net/ethernet/intel/igb/igb_main.c in the IGB driver in the Linux kernel before 6.5.3. A buffer size may not be adequate for frames larger than the MTU.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-45871"
    },
    {
      "cve": "CVE-2023-48795",
      "cwe": {
        "id": "CWE-222",
        "name": "Truncation of Security-relevant Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The SSH transport protocol with certain OpenSSH extensions, found in OpenSSH before 9.6 and other products, allows remote attackers to bypass integrity checks such that some packets are omitted (from the extension negotiation message), and a client and server may consequently end up with a connection for which some security features have been downgraded or disabled, aka a Terrapin attack. This occurs because the SSH Binary Packet Protocol (BPP), implemented by these extensions, mishandles the handshake phase and mishandles use of sequence numbers. For example, there is an effective attack against SSH\u0027s use of ChaCha20-Poly1305 (and CBC with Encrypt-then-MAC). The bypass occurs in chacha20-poly1305@openssh.com and (if CBC is used) the -etm@openssh.com MAC algorithms. This also affects Maverick Synergy Java SSH API before 3.1.0-SNAPSHOT, Dropbear through 2022.83, Ssh before 5.1.1 in Erlang/OTP, PuTTY before 0.80, AsyncSSH before 2.14.2, golang.org/x/crypto before 0.17.0, libssh before 0.10.6, libssh2 through 1.11.0, Thorn Tech SFTP Gateway before 3.4.6, Tera Term before 5.1, Paramiko before 3.4.0, jsch before 0.2.15, SFTPGo before 2.5.6, Netgate pfSense Plus through 23.09.1, Netgate pfSense CE through 2.7.2, HPN-SSH through 18.2.0, ProFTPD before 1.3.8b (and before1.3.9rc2), ORYX CycloneSSH before 2.3.4, NetSarang XShell 7 before Build 0144, CrushFTP before 10.6.0, ConnectBot SSH library before 2.2.22, Apache MINA sshd through 2.11.0, sshj through 0.37.0, TinySSH through 20230101, trilead-ssh2 6401, the net-ssh gem 7.2.0 for Ruby, the mscdex ssh2 module before 1.15.0 for Node.js, the thrussh library before 0.35.1 for Rust, and the Russh crate before 0.40.2 for Rust; and there could be effects on Bitvise SSH through 9.31.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-48795"
    },
    {
      "cve": "CVE-2023-50495",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "NCurse v6.4-20230418 was discovered to contain a segmentation fault via the component _nc_wrap_entry().",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-50495"
    },
    {
      "cve": "CVE-2023-51384",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In ssh-agent in OpenSSH before 9.6, certain destination constraints can be incompletely applied. When destination constraints are specified during addition of PKCS#11-hosted private keys, these constraints are only applied to the first key, even if a PKCS#11 token returns multiple keys.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-51384"
    },
    {
      "cve": "CVE-2023-51385",
      "cwe": {
        "id": "CWE-78",
        "name": "Improper Neutralization of Special Elements used in an OS Command (\u0027OS Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In ssh in OpenSSH before 9.6, OS command injection might occur if a user name or host name has shell metacharacters, and this name is referenced by an expansion token in certain situations. For example, an untrusted Git repository can have a submodule with shell metacharacters in a user name or host name.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-51385"
    },
    {
      "cve": "CVE-2023-51767",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "OpenSSH through 9.6, when common types of DRAM are used, might allow row hammer attacks (for authentication bypass) because the integer value of authenticated in mm_answer_authpassword does not resist flips of a single bit. NOTE: this is applicable to a certain threat model of attacker-victim co-location in which the attacker has user privileges.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-51767"
    },
    {
      "cve": "CVE-2024-0232",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A heap use-after-free issue has been identified in SQLite in the jsonParseAddNodeArray() function in sqlite3.c. This flaw allows a local attacker to leverage a victim to pass specially crafted malicious input to the application, potentially causing a crash and leading to a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2024-0232"
    },
    {
      "cve": "CVE-2024-0553",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in GnuTLS. The response times to malformed ciphertexts in RSA-PSK ClientKeyExchange differ from the response times of ciphertexts with correct PKCS#1 v1.5 padding. This issue may allow a remote attacker to perform a timing side-channel attack in the RSA-PSK key exchange, potentially leading to the leakage of sensitive data. CVE-2024-0553 is designated as an incomplete resolution for CVE-2023-5981.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2024-0553"
    },
    {
      "cve": "CVE-2024-0567",
      "cwe": {
        "id": "CWE-347",
        "name": "Improper Verification of Cryptographic Signature"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in GnuTLS, where a cockpit (which uses gnuTLS) rejects a certificate chain with distributed trust. This issue occurs when validating a certificate chain with cockpit-certificate-ensure. This flaw allows an unauthenticated, remote client or attacker to initiate a denial of service attack.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2024-0567"
    },
    {
      "cve": "CVE-2024-0584",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free issue was found in igmp_start_timer in net/ipv4/igmp.c in the network sub-component in the Linux Kernel. This flaw allows a local user to observe a refcnt use-after-free issue when receiving an igmp query packet, leading to a kernel information leak.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2024-0584"
    },
    {
      "cve": "CVE-2024-0684",
      "cwe": {
        "id": "CWE-122",
        "name": "Heap-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the GNU coreutils \"split\" program. A heap overflow with user-controlled data of multiple hundred bytes in length could occur in the line_bytes_split() function, potentially leading to an application crash and denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2024-0684"
    },
    {
      "cve": "CVE-2024-22365",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "linux-pam (aka Linux PAM) before 1.6.0 allows attackers to cause a denial of service (blocked login process) via mkfifo because the openat call (for protect_dir) lacks O_DIRECTORY.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2024-22365"
    },
    {
      "cve": "CVE-2024-25062",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.11.7 and 2.12.x before 2.12.5. When using the XML Reader interface with DTD validation and XInclude expansion enabled, processing crafted XML documents can lead to an xmlValidatePopElement use-after-free.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2024-25062"
    }
  ]
}

{
  "document": {
    "acknowledgments": [
      {
        "organization": "Siemens ProductCERT",
        "summary": "reporting these vulnerabilities to CISA."
      }
    ],
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Disclosure is not limited",
      "tlp": {
        "label": "WHITE",
        "url": "https://us-cert.cisa.gov/tlp/"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the firmware version  \u003e= V3.1.0 and \u003c V3.1.5 for the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP (incl. SIPLUS variant).\n\nThese GNU/Linux vulnerabilities have been externally identified. \nSiemens has released new versions for the affected products and recommends to update to the latest versions.\n\nNote: This SSA advises vulnerabilities for firmware version V3.1 only; for versions \u003c V3.1 refer to Siemens Security Bulletin SSB-439005 (\nhttps://cert-portal.siemens.com/productcert/html/ssb-439005.html).",
        "title": "Summary"
      },
      {
        "category": "general",
        "text": "As a general security measure, Siemens strongly recommends to protect network access to devices with appropriate mechanisms. In order to operate the devices in a protected IT environment, Siemens recommends to configure the environment according to Siemens\u0027 operational guidelines for Industrial Security (Download: \nhttps://www.siemens.com/cert/operational-guidelines-industrial-security), and to follow the recommendations in the product manuals.\nAdditional information on Industrial Security by Siemens can be found at: https://www.siemens.com/industrialsecurity",
        "title": "General Recommendations"
      },
      {
        "category": "general",
        "text": "For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories",
        "title": "Additional Resources"
      },
      {
        "category": "legal_disclaimer",
        "text": "The use of Siemens Security Advisories is subject to the terms and conditions listed on: https://www.siemens.com/productcert/terms-of-use.",
        "title": "Terms of Use"
      },
      {
        "category": "legal_disclaimer",
        "text": "All information products included in https://us-cert.cisa.gov/ics are provided \"as is\" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see https://us-cert.cisa.gov/tlp/.",
        "title": "Legal Notice"
      },
      {
        "category": "other",
        "text": "This ICSA is a verbatim republication of Siemens ProductCERT SSA-398330 from a direct conversion of their vendor\u0027s Common Security Advisory Framework (CSAF) advisory. This is republished to CISA\u0027s website as a means of increasing visibility and is provided \"as-is\" for informational purposes only. CISA is not responsible for the editorial or technical accuracy of republished advisories and provides no warranties of any kind regarding any information contained within this advisory.  Further, CISA does not endorse any commercial product or service.  Please contact Siemens ProductCERT directly for any questions regarding this advisory.",
        "title": "Advisory Conversion Disclaimer"
      },
      {
        "category": "other",
        "text": "Critical Manufacturing",
        "title": "Critical infrastructure sectors"
      },
      {
        "category": "other",
        "text": "Worldwide",
        "title": "Countries/areas deployed"
      },
      {
        "category": "other",
        "text": "Germany",
        "title": "Company headquarters location"
      },
      {
        "category": "general",
        "text": "CISA recommends users take defensive measures to minimize the exploitation risk of this vulnerability.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Minimize network exposure for all control system devices and/or systems, and ensure they are not accessible from the internet.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Locate control system networks and remote devices behind firewalls and isolate them from business networks.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "When remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most recent version available. Also recognize VPN is only as secure as its connected devices.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets. Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.",
        "title": "Recommended Practices"
      }
    ],
    "publisher": {
      "category": "other",
      "contact_details": "central@cisa.dhs.gov",
      "name": "CISA",
      "namespace": "https://www.cisa.gov/"
    },
    "references": [
      {
        "category": "self",
        "summary": "SSA-398330: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP  \u003e= V3.1.0 and \u003c V3.1.5 - CSAF Version",
        "url": "https://cert-portal.siemens.com/productcert/csaf/ssa-398330.json"
      },
      {
        "category": "self",
        "summary": "SSA-398330: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP  \u003e= V3.1.0 and \u003c V3.1.5 - HTML Version",
        "url": "https://cert-portal.siemens.com/productcert/html/ssa-398330.html"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-23-348-10 JSON",
        "url": "https://raw.githubusercontent.com/cisagov/CSAF/develop/csaf_files/OT/white/2023/icsa-23-348-10.json"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-23-348-10 - Web Version",
        "url": "https://www.cisa.gov/news-events/ics-advisories/icsa-23-348-10"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/alerts/ICS-ALERT-10-301-01"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/resources-tools/resources/ics-recommended-practices"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/topics/industrial-control-systems"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/sites/default/files/publications/Cybersecurity_Best_Practices_for_Industrial_Control_Systems.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/tips/ICS-TIP-12-146-01B"
      }
    ],
    "title": "Siemens SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP V3.1",
    "tracking": {
      "current_release_date": "2025-06-10T00:00:00.000000Z",
      "generator": {
        "date": "2025-06-12T16:06:29.713146Z",
        "engine": {
          "name": "CISA CSAF Generator",
          "version": "1.0.0"
        }
      },
      "id": "ICSA-23-348-10",
      "initial_release_date": "2023-12-12T00:00:00.000000Z",
      "revision_history": [
        {
          "date": "2023-12-12T00:00:00.000000Z",
          "legacy_version": "1.0",
          "number": "1",
          "summary": "Publication Date"
        },
        {
          "date": "2024-01-09T00:00:00.000000Z",
          "legacy_version": "1.1",
          "number": "2",
          "summary": "Added CVE-2021-44879, CVE-2023-46218, CVE-2023-46219, and CVE-2023-48795"
        },
        {
          "date": "2024-02-13T00:00:00.000000Z",
          "legacy_version": "1.2",
          "number": "3",
          "summary": "Added CVE-2023-45898, CVE-2023-46862, CVE-2023-6121, CVE-2023-6817, CVE-2023-6931, CVE-2023-6932, CVE-2024-0584"
        },
        {
          "date": "2024-03-12T00:00:00.000000Z",
          "legacy_version": "1.3",
          "number": "4",
          "summary": "Added CVE-2023-52425, CVE-2023-52426, CVE-2023-45918"
        },
        {
          "date": "2024-04-09T00:00:00.000000Z",
          "legacy_version": "1.4",
          "number": "5",
          "summary": "Added CVE-2024-28757"
        },
        {
          "date": "2024-05-14T00:00:00.000000Z",
          "legacy_version": "1.5",
          "number": "6",
          "summary": "Added CVE-2024-2004, CVE-2024-2379, CVE-2024-2398, CVE-2024-2466, CVE-2024-2511, CVE-2024-28085, CVE-2024-28182, CVE-2024-28834, CVE-2024-28835"
        },
        {
          "date": "2024-06-11T00:00:00.000000Z",
          "legacy_version": "1.6",
          "number": "7",
          "summary": "Added CVE-2024-2961, CVE-2024-33599, CVE-2024-33600, CVE-2024-33601, CVE-2024-33602, CVE-2024-34459"
        },
        {
          "date": "2024-07-09T00:00:00.000000Z",
          "legacy_version": "1.7",
          "number": "8",
          "summary": "Added CVE-2024-5535, CVE-2024-5742"
        },
        {
          "date": "2024-08-13T00:00:00.000000Z",
          "legacy_version": "1.8",
          "number": "9",
          "summary": "Added CVE-2017-15422, CVE-2024-7264, CVE-2024-37370, CVE-2024-37371"
        },
        {
          "date": "2024-10-08T00:00:00.000000Z",
          "legacy_version": "1.9",
          "number": "10",
          "summary": "Added CVE-2024-6409, CVE-2024-8096, CVE-2024-45490, CVE-2024-45491, CVE-2024-45492"
        },
        {
          "date": "2024-11-12T00:00:00.000000Z",
          "legacy_version": "2.0",
          "number": "11",
          "summary": "Added CVE-2024-2236, CVE-2024-9143"
        },
        {
          "date": "2024-12-10T00:00:00.000000Z",
          "legacy_version": "2.1",
          "number": "12",
          "summary": "Added CVE-2024-50602, CVE-2024-52533"
        },
        {
          "date": "2025-01-14T00:00:00.000000Z",
          "legacy_version": "2.2",
          "number": "13",
          "summary": "Added CVE-2024-11053"
        },
        {
          "date": "2025-02-11T00:00:00.000000Z",
          "legacy_version": "2.3",
          "number": "14",
          "summary": "Added multiple CVEs"
        },
        {
          "date": "2025-03-11T00:00:00.000000Z",
          "legacy_version": "2.4",
          "number": "15",
          "summary": "Added CVE-2023-52622, CVE-2024-12133, -12243, -26645, -26671, -26679, -26772, -26773, -26777, -26805, -26923, -27020, -27032, -36017, -36484, -36904, -36905, -36934, -39487, -41046, -42106, -42131, -42154, -43871, -44944, -44965, -46743, -46745, -46750, -47684, -47701, -47737, -49881, -49884, -49948, -49949, -49952, -49997, -50006, -50040, -50045, -50251, -50262, -50299, -50301, -53057, -53140, -53165, -53217, CVE-2025-0167, -0395, -0665, -0725, -26465, -26466"
        },
        {
          "date": "2025-04-08T00:00:00.000000Z",
          "legacy_version": "2.5",
          "number": "16",
          "summary": "Added CVE-2025-21694, CVE-2025-1390, CVE-2024-8176, CVE-2024-57901, CVE-2024-57884, CVE-2024-56780, CVE-2024-56779, CVE-2024-56770, CVE-2024-56650, CVE-2024-56644, CVE-2024-56606, CVE-2024-56601, CVE-2024-56600, CVE-2024-56570, CVE-2024-56569, CVE-2024-53164, CVE-2024-53124, CVE-2024-52332, CVE-2024-48881, CVE-2024-47707, CVE-2024-12243"
        },
        {
          "date": "2025-06-10T00:00:00.000000Z",
          "legacy_version": "2.6",
          "number": "17",
          "summary": "Added fix for SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP incl. SIPLUS variants"
        }
      ],
      "status": "final",
      "version": "17"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "vers:all/\u003e=V3.1.0|\u003cV3.1.5",
                "product": {
                  "name": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)",
                  "product_id": "CSAFPID-0001",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6ES7518-4AX00-1AB0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "vers:all/\u003e=V3.1.0|\u003cV3.1.5",
                "product": {
                  "name": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)",
                  "product_id": "CSAFPID-0002",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6ES7518-4AX00-1AC0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "vers:all/\u003e=V3.1.0|\u003cV3.1.5",
                "product": {
                  "name": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)",
                  "product_id": "CSAFPID-0003",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6ES7518-4FX00-1AB0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "vers:all/\u003e=V3.1.0|\u003cV3.1.5",
                "product": {
                  "name": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)",
                  "product_id": "CSAFPID-0004",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6ES7518-4FX00-1AC0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "vers:all/\u003e=V3.1.0|\u003cV3.1.5",
                "product": {
                  "name": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)",
                  "product_id": "CSAFPID-0005",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6AG1518-4AX00-4AC0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)"
          }
        ],
        "category": "vendor",
        "name": "Siemens"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2013-0340",
      "cwe": {
        "id": "CWE-611",
        "name": "Improper Restriction of XML External Entity Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "expat 2.1.0 and earlier does not properly handle entities expansion unless an application developer uses the XML_SetEntityDeclHandler function, which allows remote attackers to cause a denial of service (resource consumption), send HTTP requests to intranet servers, or read arbitrary files via a crafted XML document, aka an XML External Entity (XXE) issue.  NOTE: it could be argued that because expat already provides the ability to disable external entity expansion, the responsibility for resolving this issue lies with application developers; according to this argument, this entry should be REJECTed, and each affected application would need its own CVE.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2013-0340"
    },
    {
      "cve": "CVE-2013-4235",
      "cwe": {
        "id": "CWE-367",
        "name": "Time-of-check Time-of-use (TOCTOU) Race Condition"
      },
      "notes": [
        {
          "category": "summary",
          "text": "shadow: TOCTOU (time-of-check time-of-use) race condition when copying and removing directory trees",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:H/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2013-4235"
    },
    {
      "cve": "CVE-2014-7209",
      "cwe": {
        "id": "CWE-77",
        "name": "Improper Neutralization of Special Elements used in a Command (\u0027Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "run-mailcap in the Debian mime-support package before 3.52-1+deb7u1 allows context-dependent attackers to execute arbitrary commands via shell metacharacters in a filename.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.0,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:R/S:C/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2014-7209"
    },
    {
      "cve": "CVE-2015-20107",
      "cwe": {
        "id": "CWE-77",
        "name": "Improper Neutralization of Special Elements used in a Command (\u0027Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Python (aka CPython) up to 3.10.8, the mailcap module does not add escape characters into commands discovered in the system mailcap file. This may allow attackers to inject shell commands into applications that call mailcap.findmatch with untrusted input (if they lack validation of user-provided filenames or arguments). The fix is also back-ported to 3.7, 3.8, 3.9",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.6,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:H/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2015-20107"
    },
    {
      "cve": "CVE-2016-3189",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Use-after-free vulnerability in bzip2recover in bzip2 1.0.6 allows remote attackers to cause a denial of service (crash) via a crafted bzip2 file, related to block ends set to before the start of the block.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2016-3189"
    },
    {
      "cve": "CVE-2016-3709",
      "cwe": {
        "id": "CWE-79",
        "name": "Improper Neutralization of Input During Web Page Generation (\u0027Cross-site Scripting\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Possible cross-site scripting vulnerability in libxml after commit 960f0e2.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2016-3709"
    },
    {
      "cve": "CVE-2016-4658",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "xpointer.c in libxml2 before 2.9.5 (as used in Apple iOS before 10, OS X before 10.12, tvOS before 10, and watchOS before 3, and other products) does not forbid namespace nodes in XPointer ranges, which allows remote attackers to execute arbitrary code or cause a denial of service (use-after-free and memory corruption) via a crafted XML document.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2016-4658"
    },
    {
      "cve": "CVE-2016-5131",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Use-after-free vulnerability in libxml2 through 2.9.4, as used in Google Chrome before 52.0.2743.82, allows remote attackers to cause a denial of service or possibly have unspecified other impact via vectors related to the XPointer range-to function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2016-5131"
    },
    {
      "cve": "CVE-2016-9318",
      "cwe": {
        "id": "CWE-611",
        "name": "Improper Restriction of XML External Entity Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libxml2 2.9.4 and earlier, as used in XMLSec 1.2.23 and earlier and other products, does not offer a flag directly indicating that the current document may be read but other files may not be opened, which makes it easier for remote attackers to conduct XML External Entity (XXE) attacks via a crafted document.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2016-9318"
    },
    {
      "cve": "CVE-2016-10228",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The iconv program in the GNU C Library (aka glibc or libc6) 2.31 and earlier, when invoked with multiple suffixes in the destination encoding (TRANSLATE or IGNORE) along with the -c option, enters an infinite loop when processing invalid multi-byte input sequences, leading to a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2016-10228"
    },
    {
      "cve": "CVE-2016-10739",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the GNU C Library (aka glibc or libc6) through 2.28, the getaddrinfo function would successfully parse a string that contained an IPv4 address followed by whitespace and arbitrary characters, which could lead applications to incorrectly assume that it had parsed a valid string, without the possibility of embedded HTTP headers or other potentially dangerous substrings.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2016-10739"
    },
    {
      "cve": "CVE-2017-0663",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A remote code execution vulnerability in libxml2 could enable an attacker using a specially crafted file to execute arbitrary code within the context of an unprivileged process. This issue is rated as High due to the possibility of remote code execution in an application that uses this library. Product: Android. Versions: 4.4.4, 5.0.2, 5.1.1, 6.0, 6.0.1, 7.0, 7.1.1, 7.1.2. Android ID: A-37104170.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2017-0663"
    },
    {
      "cve": "CVE-2017-7375",
      "cwe": {
        "id": "CWE-611",
        "name": "Improper Restriction of XML External Entity Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw in libxml2 allows remote XML entity inclusion with default parser flags (i.e., when the caller did not request entity substitution, DTD validation, external DTD subset loading, or default DTD attributes). Depending on the context, this may expose a higher-risk attack surface in libxml2 not usually reachable with default parser flags, and expose content from local files, HTTP, or FTP servers (which might be otherwise unreachable).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2017-7375"
    },
    {
      "cve": "CVE-2017-7376",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer overflow in libxml2 allows remote attackers to execute arbitrary code by leveraging an incorrect limit for port values when handling redirects.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2017-7376"
    },
    {
      "cve": "CVE-2017-9047",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A buffer overflow was discovered in libxml2 20904-GITv2.9.4-16-g0741801. The function xmlSnprintfElementContent in valid.c is supposed to recursively dump the element content definition into a char buffer \u0027buf\u0027 of size \u0027size\u0027. The variable len is assigned strlen(buf). If the content-\u003etype is XML_ELEMENT_CONTENT_ELEMENT, then (i) the content-\u003eprefix is appended to buf (if it actually fits) whereupon (ii) content-\u003ename is written to the buffer. However, the check for whether the content-\u003ename actually fits also uses \u0027len\u0027 rather than the updated buffer length strlen(buf). This allows us to write about \"size\" many bytes beyond the allocated memory. This vulnerability causes programs that use libxml2, such as PHP, to crash.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2017-9047"
    },
    {
      "cve": "CVE-2017-9048",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libxml2 20904-GITv2.9.4-16-g0741801 is vulnerable to a stack-based buffer overflow. The function xmlSnprintfElementContent in valid.c is supposed to recursively dump the element content definition into a char buffer \u0027buf\u0027 of size \u0027size\u0027. At the end of the routine, the function may strcat two more characters without checking whether the current strlen(buf) + 2 \u003c size. This vulnerability causes programs that use libxml2, such as PHP, to crash.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2017-9048"
    },
    {
      "cve": "CVE-2017-9049",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libxml2 20904-GITv2.9.4-16-g0741801 is vulnerable to a heap-based buffer over-read in the xmlDictComputeFastKey function in dict.c. This vulnerability causes programs that use libxml2, such as PHP, to crash. This vulnerability exists because of an incomplete fix for libxml2 Bug 759398.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2017-9049"
    },
    {
      "cve": "CVE-2017-9050",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libxml2 20904-GITv2.9.4-16-g0741801 is vulnerable to a heap-based buffer over-read in the xmlDictAddString function in dict.c. This vulnerability causes programs that use libxml2, such as PHP, to crash. This vulnerability exists because of an incomplete fix for CVE-2016-1839.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2017-9050"
    },
    {
      "cve": "CVE-2017-15422",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Integer overflow in international date handling in International Components for Unicode (ICU) for C/C++ before 60.1, as used in V8 in Google Chrome prior to 63.0.3239.84 and other products, allowed a remote attacker to perform an out of bounds memory read via a crafted HTML page.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2017-15422"
    },
    {
      "cve": "CVE-2017-16931",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "parser.c in libxml2 before 2.9.5 mishandles parameter-entity references because the NEXTL macro calls the xmlParserHandlePEReference function in the case of a \u0027%\u0027 character in a DTD name.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2017-16931"
    },
    {
      "cve": "CVE-2017-16932",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "parser.c in libxml2 before 2.9.5 does not prevent infinite recursion in parameter entities.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2017-16932"
    },
    {
      "cve": "CVE-2017-17512",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "sensible-browser in sensible-utils before 0.0.11 does not validate strings before launching the program specified by the BROWSER environment variable, which allows remote attackers to conduct argument-injection attacks via a crafted URL, as demonstrated by a --proxy-pac-file argument.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2017-17512"
    },
    {
      "cve": "CVE-2017-18258",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The xz_head function in xzlib.c in libxml2 before 2.9.6 allows remote attackers to cause a denial of service (memory consumption) via a crafted LZMA file, because the decoder functionality does not restrict memory usage to what is required for a legitimate file.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2017-18258"
    },
    {
      "cve": "CVE-2018-0495",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Libgcrypt before 1.7.10 and 1.8.x before 1.8.3 allows a memory-cache side-channel attack on ECDSA signatures that can be mitigated through the use of blinding during the signing process in the _gcry_ecc_ecdsa_sign function in cipher/ecc-ecdsa.c, aka the Return Of the Hidden Number Problem or ROHNP. To discover an ECDSA key, the attacker needs access to either the local machine or a different virtual machine on the same physical host.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2018-0495"
    },
    {
      "cve": "CVE-2018-12886",
      "cwe": {
        "id": "CWE-209",
        "name": "Generation of Error Message Containing Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "stack_protect_prologue in cfgexpand.c and stack_protect_epilogue in function.c in GNU Compiler Collection (GCC) 4.1 through 8 (under certain circumstances) generate instruction sequences when targeting ARM targets that spill the address of the stack protector guard, which allows an attacker to bypass the protection of -fstack-protector, -fstack-protector-all, -fstack-protector-strong, and -fstack-protector-explicit against stack overflow by controlling what the stack canary is compared against.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2018-12886"
    },
    {
      "cve": "CVE-2018-14404",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer dereference vulnerability exists in the xpath.c:xmlXPathCompOpEval() function of libxml2 through 2.9.8 when parsing an invalid XPath expression in the XPATH_OP_AND or XPATH_OP_OR case. Applications processing untrusted XSL format inputs with the use of the libxml2 library may be vulnerable to a denial of service attack due to a crash of the application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2018-14404"
    },
    {
      "cve": "CVE-2018-14567",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libxml2 2.9.8, if --with-lzma is used, allows remote attackers to cause a denial of service (infinite loop) via a crafted XML file that triggers LZMA_MEMLIMIT_ERROR, as demonstrated by xmllint, a different vulnerability than CVE-2015-8035 and CVE-2018-9251.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2018-14567"
    },
    {
      "cve": "CVE-2018-18928",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "International Components for Unicode (ICU) for C/C++ 63.1 has an integer overflow in number::impl::DecimalQuantity::toScientificString() in i18n/number_decimalquantity.cpp.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2018-18928"
    },
    {
      "cve": "CVE-2018-19591",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the GNU C Library (aka glibc or libc6) through 2.28, attempting to resolve a crafted hostname via getaddrinfo() leads to the allocation of a socket descriptor that is not closed. This is related to the if_nametoindex() function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2018-19591"
    },
    {
      "cve": "CVE-2018-20482",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU Tar through 1.30, when --sparse is used, mishandles file shrinkage during read access, which allows local users to cause a denial of service (infinite read loop in sparse_dump_region in sparse.c) by modifying a file that is supposed to be archived by a different user\u0027s process (e.g., a system backup running as root).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2018-20482"
    },
    {
      "cve": "CVE-2018-20843",
      "cwe": {
        "id": "CWE-611",
        "name": "Improper Restriction of XML External Entity Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libexpat in Expat before 2.2.7, XML input including XML names that contain a large number of colons could make the XML parser consume a high amount of RAM and CPU resources while processing (enough to be usable for denial-of-service attacks).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2018-20843"
    },
    {
      "cve": "CVE-2018-25032",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "zlib before 1.2.12 allows memory corruption when deflating (i.e., when compressing) if the input has many distant matches.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2018-25032"
    },
    {
      "cve": "CVE-2019-3855",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer overflow flaw which could lead to an out of bounds write was discovered in libssh2 before 1.8.1 in the way packets are read from the server. A remote attacker who compromises a SSH server may be able to execute code on the client system when a user connects to the server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-3855"
    },
    {
      "cve": "CVE-2019-3856",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer overflow flaw, which could lead to an out of bounds write, was discovered in libssh2 before 1.8.1 in the way keyboard prompt requests are parsed. A remote attacker who compromises a SSH server may be able to execute code on the client system when a user connects to the server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-3856"
    },
    {
      "cve": "CVE-2019-3857",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer overflow flaw which could lead to an out of bounds write was discovered in libssh2 before 1.8.1 in the way SSH_MSG_CHANNEL_REQUEST packets with an exit signal are parsed. A remote attacker who compromises a SSH server may be able to execute code on the client system when a user connects to the server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-3857"
    },
    {
      "cve": "CVE-2019-3858",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out of bounds read flaw was discovered in libssh2 before 1.8.1 when a specially crafted SFTP packet is received from the server. A remote attacker who compromises a SSH server may be able to cause a Denial of Service or read data in the client memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-3858"
    },
    {
      "cve": "CVE-2019-3859",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out of bounds read flaw was discovered in libssh2 before 1.8.1 in the _libssh2_packet_require and _libssh2_packet_requirev functions. A remote attacker who compromises a SSH server may be able to cause a Denial of Service or read data in the client memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-3859"
    },
    {
      "cve": "CVE-2019-3860",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out of bounds read flaw was discovered in libssh2 before 1.8.1 in the way SFTP packets with empty payloads are parsed. A remote attacker who compromises a SSH server may be able to cause a Denial of Service or read data in the client memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-3860"
    },
    {
      "cve": "CVE-2019-3861",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out of bounds read flaw was discovered in libssh2 before 1.8.1 in the way SSH packets with a padding length value greater than the packet length are parsed. A remote attacker who compromises a SSH server may be able to cause a Denial of Service or read data in the client memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-3861"
    },
    {
      "cve": "CVE-2019-3862",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out of bounds read flaw was discovered in libssh2 before 1.8.1 in the way SSH_MSG_CHANNEL_REQUEST packets with an exit status message and no payload are parsed. A remote attacker who compromises a SSH server may be able to cause a Denial of Service or read data in the client memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-3862"
    },
    {
      "cve": "CVE-2019-3863",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in libssh2 before 1.8.1. A server could send a multiple keyboard interactive response messages whose total length are greater than unsigned char max characters. This value is used as an index to copy memory causing in an out of bounds memory write error.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-3863"
    },
    {
      "cve": "CVE-2019-5018",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An exploitable use after free vulnerability exists in the window function functionality of Sqlite3 3.26.0. A specially crafted SQL command can cause a use after free vulnerability, potentially resulting in remote code execution. An attacker can send a malicious SQL command to trigger this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-5018"
    },
    {
      "cve": "CVE-2019-5094",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An exploitable code execution vulnerability exists in the quota file functionality of E2fsprogs 1.45.3. A specially crafted ext4 partition can cause an out-of-bounds write on the heap, resulting in code execution. An attacker can corrupt a partition to trigger this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-5094"
    },
    {
      "cve": "CVE-2019-5188",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A code execution vulnerability exists in the directory rehashing functionality of E2fsprogs e2fsck 1.45.4. A specially crafted ext4 directory can cause an out-of-bounds write on the stack, resulting in code execution. An attacker can corrupt a partition to trigger this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-5188"
    },
    {
      "cve": "CVE-2019-5435",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer overflow in curl\u0027s URL API results in a buffer overflow in libcurl 7.62.0 to and including 7.64.1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-5435"
    },
    {
      "cve": "CVE-2019-5436",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A heap buffer overflow in the TFTP receiving code allows for DoS or arbitrary code execution in libcurl versions 7.19.4 through 7.64.1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-5436"
    },
    {
      "cve": "CVE-2019-5443",
      "cwe": {
        "id": "CWE-427",
        "name": "Uncontrolled Search Path Element"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A non-privileged user or program can put code and a config file in a known non-privileged path (under C:/usr/local/) that will make curl \u003c= 7.65.1 automatically run the code (as an openssl \"engine\") on invocation. If that curl is invoked by a privileged user it can do anything it wants.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-5443"
    },
    {
      "cve": "CVE-2019-5481",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Double-free vulnerability in the FTP-kerberos code in cURL 7.52.0 to 7.65.3.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-5481"
    },
    {
      "cve": "CVE-2019-5482",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Heap buffer overflow in the TFTP protocol handler in cURL 7.19.4 to 7.65.3.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-5482"
    },
    {
      "cve": "CVE-2019-6109",
      "cwe": {
        "id": "CWE-116",
        "name": "Improper Encoding or Escaping of Output"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in OpenSSH 7.9. Due to missing character encoding in the progress display, a malicious server (or Man-in-The-Middle attacker) can employ crafted object names to manipulate the client output, e.g., by using ANSI control codes to hide additional files being transferred. This affects refresh_progress_meter() in progressmeter.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.8,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-6109"
    },
    {
      "cve": "CVE-2019-6110",
      "cwe": {
        "id": "CWE-838",
        "name": "Inappropriate Encoding for Output Context"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In OpenSSH 7.9, due to accepting and displaying arbitrary stderr output from the server, a malicious server (or Man-in-The-Middle attacker) can manipulate the client output, for example to use ANSI control codes to hide additional files being transferred.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.8,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-6110"
    },
    {
      "cve": "CVE-2019-6111",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in OpenSSH 7.9. Due to the scp implementation being derived from 1983 rcp, the server chooses which files/directories are sent to the client. However, the scp client only performs cursory validation of the object name returned (only directory traversal attacks are prevented). A malicious scp server (or Man-in-The-Middle attacker) can overwrite arbitrary files in the scp client target directory. If recursive operation (-r) is performed, the server can manipulate subdirectories as well (for example, to overwrite the .ssh/authorized_keys file).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-6111"
    },
    {
      "cve": "CVE-2019-6488",
      "cwe": {
        "id": "CWE-404",
        "name": "Improper Resource Shutdown or Release"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The string component in the GNU C Library (aka glibc or libc6) through 2.28, when running on the x32 architecture, incorrectly attempts to use a 64-bit register for size_t in assembly codes, which can lead to a segmentation fault or possibly unspecified other impact, as demonstrated by a crash in __memmove_avx_unaligned_erms in sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S during a memcpy.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-6488"
    },
    {
      "cve": "CVE-2019-7309",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the GNU C Library (aka glibc or libc6) through 2.29, the memcmp function for the x32 architecture can incorrectly return zero (indicating that the inputs are equal) because the RDX most significant bit is mishandled.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-7309"
    },
    {
      "cve": "CVE-2019-8457",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite3 from 3.6.0 to and including 3.27.2 is vulnerable to heap out-of-bound read in the rtreenode() function when handling invalid rtree tables.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-8457"
    },
    {
      "cve": "CVE-2019-9169",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the GNU C Library (aka glibc or libc6) through 2.29, proceed_next_node in posix/regexec.c has a heap-based buffer over-read via an attempted case-insensitive regular-expression match.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-9169"
    },
    {
      "cve": "CVE-2019-9636",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Python 2.7.x through 2.7.16 and 3.x through 3.7.2 is affected by: Improper Handling of Unicode Encoding (with an incorrect netloc) during NFKC normalization. The impact is: Information disclosure (credentials, cookies, etc. that are cached against a given hostname). The components are: urllib.parse.urlsplit, urllib.parse.urlparse. The attack vector is: A specially crafted URL could be incorrectly parsed to locate cookies or authentication data and send that information to a different host than when parsed correctly. This is fixed in: v2.7.17, v2.7.17rc1, v2.7.18, v2.7.18rc1; v3.5.10, v3.5.10rc1, v3.5.7, v3.5.8, v3.5.8rc1, v3.5.8rc2, v3.5.9; v3.6.10, v3.6.10rc1, v3.6.11, v3.6.11rc1, v3.6.12, v3.6.9, v3.6.9rc1; v3.7.3, v3.7.3rc1, v3.7.4, v3.7.4rc1, v3.7.4rc2, v3.7.5, v3.7.5rc1, v3.7.6, v3.7.6rc1, v3.7.7, v3.7.7rc1, v3.7.8, v3.7.8rc1, v3.7.9.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-9636"
    },
    {
      "cve": "CVE-2019-9674",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Lib/zipfile.py in Python through 3.7.2 allows remote attackers to cause a denial of service (resource consumption) via a ZIP bomb.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-9674"
    },
    {
      "cve": "CVE-2019-9740",
      "cwe": {
        "id": "CWE-93",
        "name": "Improper Neutralization of CRLF Sequences (\u0027CRLF Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in urllib2 in Python 2.x through 2.7.16 and urllib in Python 3.x through 3.7.3. CRLF injection is possible if the attacker controls a url parameter, as demonstrated by the first argument to urllib.request.urlopen with \\r\\n (specifically in the query string after a ? character) followed by an HTTP header or a Redis command. This is fixed in: v2.7.17, v2.7.17rc1, v2.7.18, v2.7.18rc1; v3.5.10, v3.5.10rc1, v3.5.8, v3.5.8rc1, v3.5.8rc2, v3.5.9; v3.6.10, v3.6.10rc1, v3.6.11, v3.6.11rc1, v3.6.12, v3.6.9, v3.6.9rc1; v3.7.4, v3.7.4rc1, v3.7.4rc2, v3.7.5, v3.7.5rc1, v3.7.6, v3.7.6rc1, v3.7.7, v3.7.7rc1, v3.7.8, v3.7.8rc1, v3.7.9.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-9740"
    },
    {
      "cve": "CVE-2019-9923",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "pax_decode_header in sparse.c in GNU Tar before 1.32 had a NULL pointer dereference when parsing certain archives that have malformed extended headers.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-9923"
    },
    {
      "cve": "CVE-2019-9936",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite 3.27.2, running fts5 prefix queries inside a transaction could trigger a heap-based buffer over-read in fts5HashEntrySort in sqlite3.c, which may lead to an information leak. This is related to ext/fts5/fts5_hash.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-9936"
    },
    {
      "cve": "CVE-2019-9937",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite 3.27.2, interleaving reads and writes in a single transaction with an fts5 virtual table will lead to a NULL Pointer Dereference in fts5ChunkIterate in sqlite3.c. This is related to ext/fts5/fts5_hash.c and ext/fts5/fts5_index.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-9937"
    },
    {
      "cve": "CVE-2019-9947",
      "cwe": {
        "id": "CWE-93",
        "name": "Improper Neutralization of CRLF Sequences (\u0027CRLF Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in urllib2 in Python 2.x through 2.7.16 and urllib in Python 3.x through 3.7.3. CRLF injection is possible if the attacker controls a url parameter, as demonstrated by the first argument to urllib.request.urlopen with \\r\\n (specifically in the path component of a URL that lacks a ? character) followed by an HTTP header or a Redis command. This is similar to the CVE-2019-9740 query string issue. This is fixed in: v2.7.17, v2.7.17rc1, v2.7.18, v2.7.18rc1; v3.5.10, v3.5.10rc1, v3.5.8, v3.5.8rc1, v3.5.8rc2, v3.5.9; v3.6.10, v3.6.10rc1, v3.6.11, v3.6.11rc1, v3.6.12, v3.6.9, v3.6.9rc1; v3.7.4, v3.7.4rc1, v3.7.4rc2, v3.7.5, v3.7.5rc1, v3.7.6, v3.7.6rc1, v3.7.7, v3.7.7rc1, v3.7.8, v3.7.8rc1, v3.7.9.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-9947"
    },
    {
      "cve": "CVE-2019-9948",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "urllib in Python 2.x through 2.7.16 supports the local_file: scheme, which makes it easier for remote attackers to bypass protection mechanisms that blacklist file: URIs, as demonstrated by triggering a urllib.urlopen(\u0027local_file:///etc/passwd\u0027) call.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-9948"
    },
    {
      "cve": "CVE-2019-10160",
      "cwe": {
        "id": "CWE-172",
        "name": "Encoding Error"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A security regression of CVE-2019-9636 was discovered in python since commit d537ab0ff9767ef024f26246899728f0116b1ec3 affecting versions 2.7, 3.5, 3.6, 3.7 and from v3.8.0a4 through v3.8.0b1, which still allows an attacker to exploit CVE-2019-9636 by abusing the user and password parts of a URL. When an application parses user-supplied URLs to store cookies, authentication credentials, or other kind of information, it is possible for an attacker to provide specially crafted URLs to make the application locate host-related information (e.g. cookies, authentication data) and send them to a different host than where it should, unlike if the URLs had been correctly parsed. The result of an attack may vary based on the application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-10160"
    },
    {
      "cve": "CVE-2019-11360",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A buffer overflow in iptables-restore in netfilter iptables 1.8.2 allows an attacker to (at least) crash the program or potentially gain code execution via a specially crafted iptables-save file. This is related to add_param_to_argv in xshared.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.2,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-11360"
    },
    {
      "cve": "CVE-2019-12290",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU libidn2 before 2.2.0 fails to perform the roundtrip checks specified in RFC3490 Section 4.2 when converting A-labels to U-labels. This makes it possible in some circumstances for one domain to impersonate another. By creating a malicious domain that matches a target domain except for the inclusion of certain punycoded Unicode characters (that would be discarded when converted first to a Unicode label and then back to an ASCII label), arbitrary domains can be impersonated.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-12290"
    },
    {
      "cve": "CVE-2019-12900",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "BZ2_decompress in decompress.c in bzip2 through 1.0.6 has an out-of-bounds write when there are many selectors.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-12900"
    },
    {
      "cve": "CVE-2019-12904",
      "cwe": {
        "id": "CWE-668",
        "name": "Exposure of Resource to Wrong Sphere"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Libgcrypt 1.8.4, the C implementation of AES is vulnerable to a flush-and-reload side-channel attack because physical addresses are available to other processes. (The C implementation is used on platforms where an assembly-language implementation is unavailable.) NOTE: the vendor\u0027s position is that the issue report cannot be validated because there is no description of an attack",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-12904"
    },
    {
      "cve": "CVE-2019-13057",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the server in OpenLDAP before 2.4.48. When the server administrator delegates rootDN (database admin) privileges for certain databases but wants to maintain isolation (e.g., for multi-tenant deployments), slapd does not properly stop a rootDN from requesting authorization as an identity from another database during a SASL bind or with a proxyAuthz (RFC 4370) control. (It is not a common configuration to deploy a system where the server administrator and a DB administrator enjoy different levels of trust.)",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-13057"
    },
    {
      "cve": "CVE-2019-13565",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in OpenLDAP 2.x before 2.4.48. When using SASL authentication and session encryption, and relying on the SASL security layers in slapd access controls, it is possible to obtain access that would otherwise be denied via a simple bind for any identity covered in those ACLs. After the first SASL bind is completed, the sasl_ssf value is retained for all new non-SASL connections. Depending on the ACL configuration, this can affect different types of operations (searches, modifications, etc.). In other words, a successful authorization step completed by one user affects the authorization requirement for a different user.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-13565"
    },
    {
      "cve": "CVE-2019-13627",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "It was discovered that there was a ECDSA timing attack in the libgcrypt20 cryptographic library. Version affected: 1.8.4-5, 1.7.6-2+deb9u3, and 1.6.3-2+deb8u4. Versions fixed: 1.8.5-2 and 1.6.3-2+deb8u7.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:N/UI:R/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-13627"
    },
    {
      "cve": "CVE-2019-15847",
      "cwe": {
        "id": "CWE-331",
        "name": "Insufficient Entropy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The POWER9 backend in GNU Compiler Collection (GCC) before version 10 could optimize multiple calls of the __builtin_darn intrinsic into a single call, thus reducing the entropy of the random number generator. This occurred because a volatile operation was not specified. For example, within a single execution of a program, the output of every __builtin_darn() call may be the same.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-15847"
    },
    {
      "cve": "CVE-2019-15903",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libexpat before 2.2.8, crafted XML input could fool the parser into changing from DTD parsing to document parsing too early; a consecutive call to XML_GetCurrentLineNumber (or XML_GetCurrentColumnNumber) then resulted in a heap-based buffer over-read.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-15903"
    },
    {
      "cve": "CVE-2019-16056",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in Python through 2.7.16, 3.x through 3.5.7, 3.6.x through 3.6.9, and 3.7.x through 3.7.4. The email module wrongly parses email addresses that contain multiple @ characters. An application that uses the email module and implements some kind of checks on the From/To headers of a message could be tricked into accepting an email address that should be denied. An attack may be the same as in CVE-2019-11340; however, this CVE applies to Python more generally.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-16056"
    },
    {
      "cve": "CVE-2019-16168",
      "cwe": {
        "id": "CWE-369",
        "name": "Divide By Zero"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite through 3.29.0, whereLoopAddBtreeIndex in sqlite3.c can crash a browser or other application because of missing validation of a sqlite_stat1 sz field, aka a \"severe division by zero in the query planner.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-16168"
    },
    {
      "cve": "CVE-2019-16905",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "OpenSSH 7.7 through 7.9 and 8.x before 8.1, when compiled with an experimental key type, has a pre-authentication integer overflow if a client or server is configured to use a crafted XMSS key. This leads to memory corruption and local code execution because of an error in the XMSS key parsing algorithm. NOTE: the XMSS implementation is considered experimental in all released OpenSSH versions, and there is no supported way to enable it when building portable OpenSSH.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-16905"
    },
    {
      "cve": "CVE-2019-17498",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libssh2 v1.9.0 and earlier versions, the SSH_MSG_DISCONNECT logic in packet.c has an integer overflow in a bounds check, enabling an attacker to specify an arbitrary (out-of-bounds) offset for a subsequent memory read. A crafted SSH server may be able to disclose sensitive information or cause a denial of service condition on the client system when a user connects to the server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-17498"
    },
    {
      "cve": "CVE-2019-17543",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "LZ4 before 1.9.2 has a heap-based buffer overflow in LZ4_write32 (related to LZ4_compress_destSize), affecting applications that call LZ4_compress_fast with a large input. (This issue can also lead to data corruption.) NOTE: the vendor states \"only a few specific / uncommon usages of the API are at risk.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-17543"
    },
    {
      "cve": "CVE-2019-17594",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a heap-based buffer over-read in the _nc_find_entry function in tinfo/comp_hash.c in the terminfo library in ncurses before 6.1-20191012.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-17594"
    },
    {
      "cve": "CVE-2019-17595",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a heap-based buffer over-read in the fmt_entry function in tinfo/comp_hash.c in the terminfo library in ncurses before 6.1-20191012.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:L/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-17595"
    },
    {
      "cve": "CVE-2019-18224",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "idn2_to_ascii_4i in lib/lookup.c in GNU libidn2 before 2.1.1 has a heap-based buffer overflow via a long domain string.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-18224"
    },
    {
      "cve": "CVE-2019-18276",
      "cwe": {
        "id": "CWE-273",
        "name": "Improper Check for Dropped Privileges"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in disable_priv_mode in shell.c in GNU Bash through 5.0 patch 11. By default, if Bash is run with its effective UID not equal to its real UID, it will drop privileges by setting its effective UID to its real UID. However, it does so incorrectly. On Linux and other systems that support \"saved UID\" functionality, the saved UID is not dropped. An attacker with command execution in the shell can use \"enable -f\" for runtime loading of a new builtin, which can be a shared object that calls setuid() and therefore regains privileges. However, binaries running with an effective UID of 0 are unaffected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-18276"
    },
    {
      "cve": "CVE-2019-18348",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in urllib2 in Python 2.x through 2.7.17 and urllib in Python 3.x through 3.8.0. CRLF injection is possible if the attacker controls a url parameter, as demonstrated by the first argument to urllib.request.urlopen with \\r\\n (specifically in the host component of a URL) followed by an HTTP header. This is similar to the CVE-2019-9740 query string issue and the CVE-2019-9947 path string issue. (This is not exploitable when glibc has CVE-2016-10739 fixed.). This is fixed in: v2.7.18, v2.7.18rc1; v3.5.10, v3.5.10rc1; v3.6.11, v3.6.11rc1, v3.6.12; v3.7.8, v3.7.8rc1, v3.7.9; v3.8.3, v3.8.3rc1, v3.8.4, v3.8.4rc1, v3.8.5, v3.8.6, v3.8.6rc1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-18348"
    },
    {
      "cve": "CVE-2019-19126",
      "cwe": {
        "id": "CWE-665",
        "name": "Improper Initialization"
      },
      "notes": [
        {
          "category": "summary",
          "text": "On the x86-64 architecture, the GNU C Library (aka glibc) before 2.31 fails to ignore the LD_PREFER_MAP_32BIT_EXEC environment variable during program execution after a security transition, allowing local attackers to restrict the possible mapping addresses for loaded libraries and thus bypass ASLR for a setuid program.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19126"
    },
    {
      "cve": "CVE-2019-19242",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite 3.30.1 mishandles pExpr-\u003ey.pTab, as demonstrated by the TK_COLUMN case in sqlite3ExprCodeTarget in expr.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19242"
    },
    {
      "cve": "CVE-2019-19244",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Select in select.c in SQLite 3.30.1 allows a crash if a sub-select uses both DISTINCT and window functions, and also has certain ORDER BY usage.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19244"
    },
    {
      "cve": "CVE-2019-19317",
      "cwe": {
        "id": "CWE-681",
        "name": "Incorrect Conversion between Numeric Types"
      },
      "notes": [
        {
          "category": "summary",
          "text": "lookupName in resolve.c in SQLite 3.30.1 omits bits from the colUsed bitmask in the case of a generated column, which allows attackers to cause a denial of service or possibly have unspecified other impact.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19317"
    },
    {
      "cve": "CVE-2019-19603",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite 3.30.1 mishandles certain SELECT statements with a nonexistent VIEW, leading to an application crash.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19603"
    },
    {
      "cve": "CVE-2019-19645",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "alter.c in SQLite through 3.30.1 allows attackers to trigger infinite recursion via certain types of self-referential views in conjunction with ALTER TABLE statements.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19645"
    },
    {
      "cve": "CVE-2019-19646",
      "cwe": {
        "id": "CWE-754",
        "name": "Improper Check for Unusual or Exceptional Conditions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "pragma.c in SQLite through 3.30.1 mishandles NOT NULL in an integrity_check PRAGMA command in certain cases of generated columns.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19646"
    },
    {
      "cve": "CVE-2019-19880",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "exprListAppendList in window.c in SQLite 3.30.1 allows attackers to trigger an invalid pointer dereference because constant integer values in ORDER BY clauses of window definitions are mishandled.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19880"
    },
    {
      "cve": "CVE-2019-19906",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "cyrus-sasl (aka Cyrus SASL) 2.1.27 has an out-of-bounds write leading to unauthenticated remote denial-of-service in OpenLDAP via a malformed LDAP packet. The OpenLDAP crash is ultimately caused by an off-by-one error in _sasl_add_string in common.c in cyrus-sasl.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19906"
    },
    {
      "cve": "CVE-2019-19923",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "flattenSubquery in select.c in SQLite 3.30.1 mishandles certain uses of SELECT DISTINCT involving a LEFT JOIN in which the right-hand side is a view. This can cause a NULL pointer dereference (or incorrect results).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19923"
    },
    {
      "cve": "CVE-2019-19924",
      "cwe": {
        "id": "CWE-755",
        "name": "Improper Handling of Exceptional Conditions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite 3.30.1 mishandles certain parser-tree rewriting, related to expr.c, vdbeaux.c, and window.c. This is caused by incorrect sqlite3WindowRewrite() error handling.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19924"
    },
    {
      "cve": "CVE-2019-19925",
      "cwe": {
        "id": "CWE-434",
        "name": "Unrestricted Upload of File with Dangerous Type"
      },
      "notes": [
        {
          "category": "summary",
          "text": "zipfileUpdate in ext/misc/zipfile.c in SQLite 3.30.1 mishandles a NULL pathname during an update of a ZIP archive.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19925"
    },
    {
      "cve": "CVE-2019-19926",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "multiSelect in select.c in SQLite 3.30.1 mishandles certain errors during parsing, as demonstrated by errors from sqlite3WindowRewrite() calls. NOTE: this vulnerability exists because of an incomplete fix for CVE-2019-19880.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19926"
    },
    {
      "cve": "CVE-2019-19956",
      "cwe": {
        "id": "CWE-772",
        "name": "Missing Release of Resource after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "xmlParseBalancedChunkMemoryRecover in parser.c in libxml2 before 2.9.10 has a memory leak related to newDoc-\u003eoldNs.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19956"
    },
    {
      "cve": "CVE-2019-19959",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ext/misc/zipfile.c in SQLite 3.30.1 mishandles certain uses of INSERT INTO in situations involving embedded \u0027\\0\u0027 characters in filenames, leading to a memory-management error that can be detected by (for example) valgrind.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19959"
    },
    {
      "cve": "CVE-2019-20218",
      "cwe": {
        "id": "CWE-755",
        "name": "Improper Handling of Exceptional Conditions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "selectExpander in select.c in SQLite 3.30.1 proceeds with WITH stack unwinding even after a parsing error.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-20218"
    },
    {
      "cve": "CVE-2019-20367",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nlist.c in libbsd before 0.10.0 has an out-of-bounds read during a comparison for a symbol name from the string table (strtab).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-20367"
    },
    {
      "cve": "CVE-2019-20388",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "xmlSchemaPreRun in xmlschemas.c in libxml2 2.9.10 allows an xmlSchemaValidateStream memory leak.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-20388"
    },
    {
      "cve": "CVE-2019-20795",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "iproute2 before 5.1.0 has a use-after-free in get_netnsid_from_name in ip/ipnetns.c. NOTE: security relevance may be limited to certain uses of setuid that, although not a default, are sometimes a configuration option offered to end users. Even when setuid is used, other factors (such as C library configuration) may block exploitability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-20795"
    },
    {
      "cve": "CVE-2019-20907",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Lib/tarfile.py in Python through 3.8.3, an attacker is able to craft a TAR archive leading to an infinite loop when opened by tarfile.open, because _proc_pax lacks header validation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-20907"
    },
    {
      "cve": "CVE-2019-25013",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The iconv feature in the GNU C Library (aka glibc or libc6) through 2.32, when processing invalid multi-byte input sequences in the EUC-KR encoding, may have a buffer over-read.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-25013"
    },
    {
      "cve": "CVE-2019-1010022",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "** DISPUTED ** GNU Libc current is affected by: Mitigation bypass. The impact is: Attacker may bypass stack guard protection. The component is: nptl. The attack vector is: Exploit stack buffer overflow vulnerability and use this bypass vulnerability to bypass stack guard. NOTE: Upstream comments indicate \"this is being treated as a non-security bug and no real threat.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-1010022"
    },
    {
      "cve": "CVE-2019-1010023",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "** DISPUTED ** GNU Libc current is affected by: Re-mapping current loaded library with malicious ELF file. The impact is: In worst case attacker may evaluate privileges. The component is: libld. The attack vector is: Attacker sends 2 ELF files to victim and asks to run ldd on it. ldd execute code. NOTE: Upstream comments indicate \"this is being treated as a non-security bug and no real threat.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-1010023"
    },
    {
      "cve": "CVE-2019-1010024",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "** DISPUTED ** GNU Libc current is affected by: Mitigation bypass. The impact is: Attacker may bypass ASLR using cache of thread stack and heap. The component is: glibc. NOTE: Upstream comments indicate \"this is being treated as a non-security bug and no real threat.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-1010024"
    },
    {
      "cve": "CVE-2019-1010025",
      "cwe": {
        "id": "CWE-330",
        "name": "Use of Insufficiently Random Values"
      },
      "notes": [
        {
          "category": "summary",
          "text": "** DISPUTED ** GNU Libc current is affected by: Mitigation bypass. The impact is: Attacker may guess the heap addresses of pthread_created thread. The component is: glibc. NOTE: the vendor\u0027s position is \"ASLR bypass itself is not a vulnerability.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-1010025"
    },
    {
      "cve": "CVE-2019-1010180",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU gdb All versions is affected by: Buffer Overflow - Out of bound memory access. The impact is: Deny of Service, Memory Disclosure, and Possible Code Execution. The component is: The main gdb module. The attack vector is: Open an ELF for debugging. The fixed version is: Not fixed yet.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-1010180"
    },
    {
      "cve": "CVE-2020-1712",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A heap use-after-free vulnerability was found in systemd before version v245-rc1, where asynchronous Polkit queries are performed while handling dbus messages. A local unprivileged attacker can abuse this flaw to crash systemd services or potentially execute code and elevate their privileges, by sending specially crafted dbus messages.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-1712"
    },
    {
      "cve": "CVE-2020-1751",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds write vulnerability was found in glibc before 2.31 when handling signal trampolines on PowerPC. Specifically, the backtrace function did not properly check the array bounds when storing the frame address, resulting in a denial of service or potential code execution. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-1751"
    },
    {
      "cve": "CVE-2020-1752",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability introduced in glibc upstream version 2.14 was found in the way the tilde expansion was carried out. Directory paths containing an initial tilde followed by a valid username were affected by this issue. A local attacker could exploit this flaw by creating a specially crafted path that, when processed by the glob function, would potentially lead to arbitrary code execution. This was fixed in version 2.32.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-1752"
    },
    {
      "cve": "CVE-2020-6096",
      "cwe": {
        "id": "CWE-195",
        "name": "Signed to Unsigned Conversion Error"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An exploitable signed comparison vulnerability exists in the ARMv7 memcpy() implementation of GNU glibc 2.30.9000. Calling memcpy() (on ARMv7 targets that utilize the GNU glibc implementation) with a negative value for the \u0027num\u0027 parameter results in a signed comparison vulnerability. If an attacker underflows the \u0027num\u0027 parameter to memcpy(), this vulnerability could lead to undefined behavior such as writing to out-of-bounds memory and potentially remote code execution. Furthermore, this memcpy() implementation allows for program execution to continue in scenarios where a segmentation fault or crash should have occurred. The dangers occur in that subsequent execution and iterations of this code will be executed with this corrupted data.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-6096"
    },
    {
      "cve": "CVE-2020-7595",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "xmlStringLenDecodeEntities in parser.c in libxml2 2.9.10 has an infinite loop in a certain end-of-file situation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-7595"
    },
    {
      "cve": "CVE-2020-8169",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The libcurl library versions 7.62.0 to and including  7.70.0 are vulnerable to an information disclosure vulnerability that can lead to a partial password being leaked over the network and to the DNS server(s).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-8169"
    },
    {
      "cve": "CVE-2020-8177",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl 7.20.0 through 7.70.0 is vulnerable to improper restriction of names for files and other resources that can lead too overwriting a local file when the -J flag is used.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-8177"
    },
    {
      "cve": "CVE-2020-8231",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Due to use of a dangling pointer, libcurl 7.29.0 through 7.71.1 can use the wrong connection when sending data.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-8231"
    },
    {
      "cve": "CVE-2020-8284",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A malicious server can use the FTP PASV response to trick curl 7.73.0 and earlier into connecting back to a given IP address and port, and this way potentially make curl extract information about services that are otherwise private and not disclosed, for example doing port scanning and service banner extractions.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-8284"
    },
    {
      "cve": "CVE-2020-8285",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl 7.21.0 to and including 7.73.0 is vulnerable to uncontrolled recursion due to a stack overflow issue in FTP wildcard match parsing.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-8285"
    },
    {
      "cve": "CVE-2020-8286",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The libcurl library versions 7.41.0 to and including  7.73.0 are vulnerable to an improper check for certificate revocation due to insufficient verification of the OCSP response. This vulnerability could allow an attacker to pass a revoked certificate as valid.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-8286"
    },
    {
      "cve": "CVE-2020-8315",
      "cwe": {
        "id": "CWE-427",
        "name": "Uncontrolled Search Path Element"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Python (CPython) 3.6 through 3.6.10, 3.7 through 3.7.6, and 3.8 through 3.8.1, an insecure dependency load upon launch on Windows 7 may result in an attacker\u0027s copy of api-ms-win-core-path-l1-1-0.dll being loaded and used instead of the system\u0027s copy. Windows 8 and later are unaffected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-8315"
    },
    {
      "cve": "CVE-2020-8492",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Python 2.7 through 2.7.17, 3.5 through 3.5.9, 3.6 through 3.6.10, 3.7 through 3.7.6, and 3.8 through 3.8.1 allows an HTTP server to conduct Regular Expression Denial of Service (ReDoS) attacks against a client because of urllib.request.AbstractBasicAuthHandler catastrophic backtracking.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-8492"
    },
    {
      "cve": "CVE-2020-9327",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite 3.31.1, isAuxiliaryVtabOperator allows attackers to trigger a NULL pointer dereference and segmentation fault because of generated column optimizations.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-9327"
    },
    {
      "cve": "CVE-2020-10029",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The GNU C Library (aka glibc or libc6) before 2.32 could overflow an on-stack buffer during range reduction if an input to an 80-bit long double function contains a non-canonical bit pattern, a seen when passing a 0x5d414141414141410000 value to sinl on x86 targets. This is related to sysdeps/ieee754/ldbl-96/e_rem_pio2l.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-10029"
    },
    {
      "cve": "CVE-2020-10531",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in International Components for Unicode (ICU) for C/C++ through 66.1. An integer overflow, leading to a heap-based buffer overflow, exists in the UnicodeString::doAppend() function in common/unistr.cpp.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-10531"
    },
    {
      "cve": "CVE-2020-10543",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Perl before 5.30.3 on 32-bit platforms allows a heap-based buffer overflow because nested regular expression quantifiers have an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.2,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-10543"
    },
    {
      "cve": "CVE-2020-10735",
      "cwe": {
        "id": "CWE-704",
        "name": "Incorrect Type Conversion or Cast"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in python. In algorithms with quadratic time complexity using non-binary bases, when using int(\"text\"), a system could take 50ms to parse an int string with 100,000 digits and 5s for 1,000,000 digits (float, decimal, int.from_bytes(), and int() for binary bases 2, 4, 8, 16, and 32 are not affected). The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-10735"
    },
    {
      "cve": "CVE-2020-10878",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Perl before 5.30.3 has an integer overflow related to mishandling of a \"PL_regkind[OP(n)] == NOTHING\" situation. A crafted regular expression could lead to malformed bytecode with a possibility of instruction injection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.6,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-10878"
    },
    {
      "cve": "CVE-2020-11501",
      "cwe": {
        "id": "CWE-330",
        "name": "Use of Insufficiently Random Values"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GnuTLS 3.6.x before 3.6.13 uses incorrect cryptography for DTLS. The earliest affected version is 3.6.3 (2018-07-16) because of an error in a 2017-10-06 commit. The DTLS client always uses 32 \u0027\\0\u0027 bytes instead of a random value, and thus contributes no randomness to a DTLS negotiation. This breaks the security guarantees of the DTLS protocol.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-11501"
    },
    {
      "cve": "CVE-2020-11655",
      "cwe": {
        "id": "CWE-665",
        "name": "Improper Initialization"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite through 3.31.1 allows attackers to cause a denial of service (segmentation fault) via a malformed window-function query because the AggInfo object\u0027s initialization is mishandled.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-11655"
    },
    {
      "cve": "CVE-2020-11656",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite through 3.31.1, the ALTER TABLE implementation has a use-after-free, as demonstrated by an ORDER BY clause that belongs to a compound SELECT statement.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-11656"
    },
    {
      "cve": "CVE-2020-12062",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The scp client in OpenSSH 8.2 incorrectly sends duplicate responses to the server upon a utimes system call failure, which allows a malicious unprivileged user on the remote server to overwrite arbitrary files in the client\u0027s download directory by creating a crafted subdirectory anywhere on the remote server. The victim must use the command scp -rp to download a file hierarchy containing, anywhere inside, this crafted subdirectory. NOTE: the vendor points out that \"this attack can achieve no more than a hostile peer is already able to achieve within the scp protocol\" and \"utimes does not fail under normal circumstances.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-12062"
    },
    {
      "cve": "CVE-2020-12243",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In filter.c in slapd in OpenLDAP before 2.4.50, LDAP search filters with nested boolean expressions can result in denial of service (daemon crash).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-12243"
    },
    {
      "cve": "CVE-2020-12723",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "regcomp.c in Perl before 5.30.3 allows a buffer overflow via a crafted regular expression because of recursive S_study_chunk calls.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-12723"
    },
    {
      "cve": "CVE-2020-12762",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "json-c through 0.14 has an integer overflow and out-of-bounds write via a large JSON file, as demonstrated by printbuf_memappend.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-12762"
    },
    {
      "cve": "CVE-2020-13434",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite through 3.32.0 has an integer overflow in sqlite3_str_vappendf in printf.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-13434"
    },
    {
      "cve": "CVE-2020-13435",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite through 3.32.0 has a segmentation fault in sqlite3ExprCodeTarget in expr.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-13435"
    },
    {
      "cve": "CVE-2020-13529",
      "cwe": {
        "id": "CWE-290",
        "name": "Authentication Bypass by Spoofing"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An exploitable denial-of-service vulnerability exists in Systemd 245. A specially crafted DHCP FORCERENEW packet can cause a server running the DHCP client to be vulnerable to a DHCP ACK spoofing attack. An attacker can forge a pair of FORCERENEW and DCHP ACK packets to reconfigure the server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:A/AC:H/PR:N/UI:N/S:C/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-13529"
    },
    {
      "cve": "CVE-2020-13630",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ext/fts3/fts3.c in SQLite before 3.32.0 has a use-after-free in fts3EvalNextRow, related to the snippet feature.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-13630"
    },
    {
      "cve": "CVE-2020-13631",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite before 3.32.0 allows a virtual table to be renamed to the name of one of its shadow tables, related to alter.c and build.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-13631"
    },
    {
      "cve": "CVE-2020-13632",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ext/fts3/fts3_snippet.c in SQLite before 3.32.0 has a NULL pointer dereference via a crafted matchinfo() query.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-13632"
    },
    {
      "cve": "CVE-2020-13776",
      "cwe": {
        "id": "CWE-269",
        "name": "Improper Privilege Management"
      },
      "notes": [
        {
          "category": "summary",
          "text": "systemd through v245 mishandles numerical usernames such as ones composed of decimal digits or 0x followed by hex digits, as demonstrated by use of root privileges when privileges of the 0x0 user account were intended. NOTE: this issue exists because of an incomplete fix for CVE-2017-1000082.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-13776"
    },
    {
      "cve": "CVE-2020-13777",
      "cwe": {
        "id": "CWE-327",
        "name": "Use of a Broken or Risky Cryptographic Algorithm"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GnuTLS 3.6.x before 3.6.14 uses incorrect cryptography for encrypting a session ticket (a loss of confidentiality in TLS 1.2, and an authentication bypass in TLS 1.3). The earliest affected version is 3.6.4 (2018-09-24) because of an error in a 2018-09-18 commit. Until the first key rotation, the TLS server always uses wrong data in place of an encryption key derived from an application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-13777"
    },
    {
      "cve": "CVE-2020-13871",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite 3.32.2 has a use-after-free in resetAccumulator in select.c because the parse tree rewrite for window functions is too late.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-13871"
    },
    {
      "cve": "CVE-2020-14145",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The client side in OpenSSH 5.7 through 8.4 has an Observable Discrepancy leading to an information leak in the algorithm negotiation. This allows man-in-the-middle attackers to target initial connection attempts (where no host key for the server has been cached by the client). NOTE: some reports state that 8.5 and 8.6 are also affected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-14145"
    },
    {
      "cve": "CVE-2020-14422",
      "cwe": {
        "id": "CWE-682",
        "name": "Incorrect Calculation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Lib/ipaddress.py in Python through 3.8.3 improperly computes hash values in the IPv4Interface and IPv6Interface classes, which might allow a remote attacker to cause a denial of service if an application is affected by the performance of a dictionary containing IPv4Interface or IPv6Interface objects, and this attacker can cause many dictionary entries to be created. This is fixed in: v3.5.10, v3.5.10rc1; v3.6.12; v3.7.9; v3.8.4, v3.8.4rc1, v3.8.5, v3.8.6, v3.8.6rc1; v3.9.0, v3.9.0b4, v3.9.0b5, v3.9.0rc1, v3.9.0rc2.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-14422"
    },
    {
      "cve": "CVE-2020-15358",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite before 3.32.3, select.c mishandles query-flattener optimization, leading to a multiSelectOrderBy heap overflow because of misuse of transitive properties for constant propagation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-15358"
    },
    {
      "cve": "CVE-2020-15523",
      "cwe": {
        "id": "CWE-427",
        "name": "Uncontrolled Search Path Element"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Python 3.6 through 3.6.10, 3.7 through 3.7.8, 3.8 through 3.8.4rc1, and 3.9 through 3.9.0b4 on Windows, a Trojan horse python3.dll might be used in cases where CPython is embedded in a native application. This occurs because python3X.dll may use an invalid search path for python3.dll loading (after Py_SetPath has been used). NOTE: this issue CANNOT occur when using python.exe from a standard (non-embedded) Python installation on Windows.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-15523"
    },
    {
      "cve": "CVE-2020-15778",
      "cwe": {
        "id": "CWE-78",
        "name": "Improper Neutralization of Special Elements used in an OS Command (\u0027OS Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "scp in OpenSSH through 8.3p1 allows command injection in the scp.c toremote function, as demonstrated by backtick characters in the destination argument. NOTE: the vendor reportedly has stated that they intentionally omit validation of \"anomalous argument transfers\" because that could \"stand a great chance of breaking existing workflows.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-15778"
    },
    {
      "cve": "CVE-2020-15801",
      "cwe": {
        "id": "CWE-426",
        "name": "Untrusted Search Path"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Python 3.8.4, sys.path restrictions specified in a python38._pth file are ignored, allowing code to be loaded from arbitrary locations. The \u003cexecutable-name\u003e._pth file (e.g., the python._pth file) is not affected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-15801"
    },
    {
      "cve": "CVE-2020-19185",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer Overflow vulnerability in one_one_mapping function in progs/dump_entry.c:1373 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-19185"
    },
    {
      "cve": "CVE-2020-19186",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer Overflow vulnerability in _nc_find_entry function in tinfo/comp_hash.c:66 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-19186"
    },
    {
      "cve": "CVE-2020-19187",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer Overflow vulnerability in fmt_entry function in progs/dump_entry.c:1100 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-19187"
    },
    {
      "cve": "CVE-2020-19188",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer Overflow vulnerability in fmt_entry function in progs/dump_entry.c:1116 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-19188"
    },
    {
      "cve": "CVE-2020-19189",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer Overflow vulnerability in postprocess_terminfo function in tinfo/parse_entry.c:997 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-19189"
    },
    {
      "cve": "CVE-2020-19190",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer Overflow vulnerability in _nc_find_entry in tinfo/comp_hash.c:70 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-19190"
    },
    {
      "cve": "CVE-2020-19909",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Integer overflow vulnerability in tool_operate.c in curl 7.65.2 via a large value as the retry delay. NOTE: many parties report that this has no direct security impact on the curl user; however, it may (in theory) cause a denial of service to associated systems or networks if, for example, --retry-delay is misinterpreted as a value much smaller than what was intended. This is not especially plausible because the overflow only happens if the user was trying to specify that curl should wait weeks (or longer) before trying to recover from a transient error.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-19909"
    },
    {
      "cve": "CVE-2020-21047",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The libcpu component which is used by libasm of elfutils version 0.177 (git 47780c9e), suffers from denial-of-service vulnerability caused by application crashes due to out-of-bounds write (CWE-787), off-by-one error (CWE-193) and reachable assertion (CWE-617); to exploit the vulnerability, the attackers need to craft certain ELF files which bypass the missing bound checks.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-21047"
    },
    {
      "cve": "CVE-2020-21913",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "International Components for Unicode (ICU-20850) v66.1 was discovered to contain a use after free bug in the pkg_createWithAssemblyCode function in the file tools/pkgdata/pkgdata.cpp.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-21913"
    },
    {
      "cve": "CVE-2020-22218",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in function _libssh2_packet_add in libssh2 1.10.0 allows attackers to access out of bounds memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-22218"
    },
    {
      "cve": "CVE-2020-24659",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in GnuTLS before 3.6.15. A server can trigger a NULL pointer dereference in a TLS 1.3 client if a no_renegotiation alert is sent with unexpected timing, and then an invalid second handshake occurs. The crash happens in the application\u0027s error handling path, where the gnutls_deinit function is called after detecting a handshake failure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-24659"
    },
    {
      "cve": "CVE-2020-24977",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNOME project libxml2 v2.9.10 has a global buffer over-read vulnerability in xmlEncodeEntitiesInternal at libxml2/entities.c. The issue has been fixed in commit 50f06b3e.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-24977"
    },
    {
      "cve": "CVE-2020-25692",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer dereference was found in OpenLDAP server and was fixed in openldap 2.4.55, during a request for renaming RDNs. An unauthenticated attacker could remotely crash the slapd process by sending a specially crafted request, causing a Denial of Service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-25692"
    },
    {
      "cve": "CVE-2020-25709",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in OpenLDAP. This flaw allows an attacker who can send a malicious packet to be processed by OpenLDAP\u2019s slapd server, to trigger an assertion failure. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-25709"
    },
    {
      "cve": "CVE-2020-25710",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in OpenLDAP in versions before 2.4.56. This flaw allows an attacker who sends a malicious packet processed by OpenLDAP to force a failed assertion in csnNormalize23(). The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-25710"
    },
    {
      "cve": "CVE-2020-26116",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "http.client in Python 3.x before 3.5.10, 3.6.x before 3.6.12, 3.7.x before 3.7.9, and 3.8.x before 3.8.5 allows CRLF injection if the attacker controls the HTTP request method, as demonstrated by inserting CR and LF control characters in the first argument of HTTPConnection.request.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.2,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-26116"
    },
    {
      "cve": "CVE-2020-27618",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The iconv function in the GNU C Library (aka glibc or libc6) 2.32 and earlier, when processing invalid multi-byte input sequences in IBM1364, IBM1371, IBM1388, IBM1390, and IBM1399 encodings, fails to advance the input state, which could lead to an infinite loop in applications, resulting in a denial of service, a different vulnerability from CVE-2016-10228.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-27618"
    },
    {
      "cve": "CVE-2020-28196",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "MIT Kerberos 5 (aka krb5) before 1.17.2 and 1.18.x before 1.18.3 allows unbounded recursion via an ASN.1-encoded Kerberos message because the lib/krb5/asn.1/asn1_encode.c support for BER indefinite lengths lacks a recursion limit.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-28196"
    },
    {
      "cve": "CVE-2020-29361",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in p11-kit 0.21.1 through 0.23.21. Multiple integer overflows have been discovered in the array allocations in the p11-kit library and the p11-kit list command, where overflow checks are missing before calling realloc or calloc.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-29361"
    },
    {
      "cve": "CVE-2020-29362",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in p11-kit 0.21.1 through 0.23.21. A heap-based buffer over-read has been discovered in the RPC protocol used by thep11-kit server/remote commands and the client library. When the remote entity supplies a byte array through a serialized PKCS#11 function call, the receiving entity may allow the reading of up to 4 bytes of memory past the heap allocation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-29362"
    },
    {
      "cve": "CVE-2020-29363",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in p11-kit 0.23.6 through 0.23.21. A heap-based buffer overflow has been discovered in the RPC protocol used by p11-kit server/remote commands and the client library. When the remote entity supplies a serialized byte array in a CK_ATTRIBUTE, the receiving entity may not allocate sufficient length for the buffer to store the deserialized value.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-29363"
    },
    {
      "cve": "CVE-2020-29562",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The iconv function in the GNU C Library (aka glibc or libc6) 2.30 to 2.32, when converting UCS4 text containing an irreversible character, fails an assertion in the code path and aborts the program, potentially resulting in a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.8,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:L/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-29562"
    },
    {
      "cve": "CVE-2020-29573",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "sysdeps/i386/ldbl2mpn.c in the GNU C Library (aka glibc or libc6) before 2.23 on x86 targets has a stack-based buffer overflow if the input to any of the printf family of functions is an 80-bit long double with a non-canonical bit pattern, as seen when passing a \\x00\\x04\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x04 value to sprintf. NOTE: the issue does not affect glibc by default in 2016 or later (i.e., 2.23 or later) because of commits made in 2015 for inlining of C99 math functions through use of GCC built-ins. In other words, the reference to 2.23 is intentional despite the mention of \"Fixed for glibc 2.33\" in the 26649 reference.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-29573"
    },
    {
      "cve": "CVE-2020-35525",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQlite 3.31.1, a potential null pointer derreference was found in the INTERSEC query processing.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-35525"
    },
    {
      "cve": "CVE-2020-35527",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite 3.31.1, there is an out of bounds access problem through ALTER TABLE for views that have a nested FROM clause.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-35527"
    },
    {
      "cve": "CVE-2020-36221",
      "cwe": {
        "id": "CWE-191",
        "name": "Integer Underflow (Wrap or Wraparound)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer underflow was discovered in OpenLDAP before 2.4.57 leading to slapd crashes in the Certificate Exact Assertion processing, resulting in denial of service (schema_init.c serialNumberAndIssuerCheck).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-36221"
    },
    {
      "cve": "CVE-2020-36222",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading to an assertion failure in slapd in the saslAuthzTo validation, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-36222"
    },
    {
      "cve": "CVE-2020-36223",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading to a slapd crash in the Values Return Filter control handling, resulting in denial of service (double free and out-of-bounds read).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-36223"
    },
    {
      "cve": "CVE-2020-36224",
      "cwe": {
        "id": "CWE-763",
        "name": "Release of Invalid Pointer or Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading to an invalid pointer free and slapd crash in the saslAuthzTo processing, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-36224"
    },
    {
      "cve": "CVE-2020-36225",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading to a double free and slapd crash in the saslAuthzTo processing, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-36225"
    },
    {
      "cve": "CVE-2020-36226",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading to a memch-\u003ebv_len miscalculation and slapd crash in the saslAuthzTo processing, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-36226"
    },
    {
      "cve": "CVE-2020-36227",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading to an infinite loop in slapd with the cancel_extop Cancel operation, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-36227"
    },
    {
      "cve": "CVE-2020-36228",
      "cwe": {
        "id": "CWE-191",
        "name": "Integer Underflow (Wrap or Wraparound)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer underflow was discovered in OpenLDAP before 2.4.57 leading to a slapd crash in the Certificate List Exact Assertion processing, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-36228"
    },
    {
      "cve": "CVE-2020-36229",
      "cwe": {
        "id": "CWE-843",
        "name": "Access of Resource Using Incompatible Type (\u0027Type Confusion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in ldap_X509dn2bv in OpenLDAP before 2.4.57 leading to a slapd crash in the X.509 DN parsing in ad_keystring, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-36229"
    },
    {
      "cve": "CVE-2020-36230",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading in an assertion failure in slapd in the X.509 DN parsing in decode.c ber_next_element, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-36230"
    },
    {
      "cve": "CVE-2021-3177",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Python 3.x through 3.9.1 has a buffer overflow in PyCArg_repr in _ctypes/callproc.c, which may lead to remote code execution in certain Python applications that accept floating-point numbers as untrusted input, as demonstrated by a 1e300 argument to c_double.from_param. This occurs because sprintf is used unsafely.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3177"
    },
    {
      "cve": "CVE-2021-3326",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The iconv function in the GNU C Library (aka glibc or libc6) 2.32 and earlier, when processing invalid input sequences in the ISO-2022-JP-3 encoding, fails an assertion in the code path and aborts the program, potentially resulting in a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3326"
    },
    {
      "cve": "CVE-2021-3426",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There\u0027s a flaw in Python 3\u0027s pydoc. A local or adjacent attacker who discovers or is able to convince another local or adjacent user to start a pydoc server could access the server and use it to disclose sensitive information belonging to the other user that they would not normally be able to access. The highest risk of this flaw is to data confidentiality. This flaw affects Python versions before 3.8.9, Python versions before 3.9.3 and Python versions before 3.10.0a7.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3426"
    },
    {
      "cve": "CVE-2021-3516",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There\u0027s a flaw in libxml2\u0027s xmllint in versions before 2.9.11. An attacker who is able to submit a crafted file to be processed by xmllint could trigger a use-after-free. The greatest impact of this flaw is to confidentiality, integrity, and availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3516"
    },
    {
      "cve": "CVE-2021-3517",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a flaw in the xml entity encoding functionality of libxml2 in versions before 2.9.11. An attacker who is able to supply a crafted file to be processed by an application linked with the affected functionality of libxml2 could trigger an out-of-bounds read. The most likely impact of this flaw is to application availability, with some potential impact to confidentiality and integrity if an attacker is able to use memory information to further exploit the application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.6,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3517"
    },
    {
      "cve": "CVE-2021-3518",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There\u0027s a flaw in libxml2 in versions before 2.9.11. An attacker who is able to submit a crafted file to be processed by an application linked with libxml2 could trigger a use-after-free. The greatest impact from this flaw is to confidentiality, integrity, and availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3518"
    },
    {
      "cve": "CVE-2021-3520",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There\u0027s a flaw in lz4. An attacker who submits a crafted file to an application linked with lz4 may be able to trigger an integer overflow, leading to calling of memmove() on a negative size argument, causing an out-of-bounds write and/or a crash. The greatest impact of this flaw is to availability, with some potential impact to confidentiality and integrity as well.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3520"
    },
    {
      "cve": "CVE-2021-3537",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability found in libxml2 in versions before 2.9.11 shows that it did not propagate errors while parsing XML mixed content, causing a NULL dereference. If an untrusted XML document was parsed in recovery mode and post-validated, the flaw could be used to crash the application. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3537"
    },
    {
      "cve": "CVE-2021-3541",
      "cwe": {
        "id": "CWE-776",
        "name": "Improper Restriction of Recursive Entity References in DTDs (\u0027XML Entity Expansion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in libxml2. Exponential entity expansion attack its possible bypassing all existing protection mechanisms and leading to denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3541"
    },
    {
      "cve": "CVE-2021-3580",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the way nettle\u0027s RSA decryption functions handled specially crafted ciphertext. An attacker could use this flaw to provide a manipulated ciphertext leading to application crash and denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3580"
    },
    {
      "cve": "CVE-2021-3733",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There\u0027s a flaw in urllib\u0027s AbstractBasicAuthHandler class. An attacker who controls a malicious HTTP server that an HTTP client (such as web browser) connects to, could trigger a Regular Expression Denial of Service (ReDOS) during an authentication request with a specially crafted payload that is sent by the server to the client. The greatest threat that this flaw poses is to application availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3733"
    },
    {
      "cve": "CVE-2021-3737",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in python. An improperly handled HTTP response in the HTTP client code of python may allow a remote attacker, who controls the HTTP server, to make the client script enter an infinite loop, consuming CPU time. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3737"
    },
    {
      "cve": "CVE-2021-3826",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Heap/stack buffer overflow in the dlang_lname function in d-demangle.c in libiberty allows attackers to potentially cause a denial of service (segmentation fault and crash) via a crafted mangled symbol.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3826"
    },
    {
      "cve": "CVE-2021-3997",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in systemd. An uncontrolled recursion in systemd-tmpfiles may lead to a denial of service at boot time when too many nested directories are created in /tmp.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3997"
    },
    {
      "cve": "CVE-2021-3998",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in glibc. The realpath() function can mistakenly return an unexpected value, potentially leading to information leakage and disclosure of sensitive data.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3998"
    },
    {
      "cve": "CVE-2021-3999",
      "cwe": {
        "id": "CWE-193",
        "name": "Off-by-one Error"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in glibc. An off-by-one buffer overflow and underflow in getcwd() may lead to memory corruption when the size of the buffer is exactly 1. A local attacker who can control the input buffer and size passed to getcwd() in a setuid program could use this flaw to potentially execute arbitrary code and escalate their privileges on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3999"
    },
    {
      "cve": "CVE-2021-4122",
      "cwe": {
        "id": "CWE-345",
        "name": "Insufficient Verification of Data Authenticity"
      },
      "notes": [
        {
          "category": "summary",
          "text": "It was found that a specially crafted LUKS header could trick cryptsetup into disabling encryption during the recovery of the device. An attacker with physical access to the medium, such as a flash disk, could use this flaw to force a user into permanently disabling the encryption layer of that medium.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:P/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-4122"
    },
    {
      "cve": "CVE-2021-4189",
      "cwe": {
        "id": "CWE-252",
        "name": "Unchecked Return Value"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in Python, specifically in the FTP (File Transfer Protocol) client library in PASV (passive) mode. The issue is how the FTP client trusts the host from the PASV response by default. This flaw allows an attacker to set up a malicious FTP server that can trick FTP clients into connecting back to a given IP address and port. This vulnerability could lead to FTP client scanning ports, which otherwise would not have been possible.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-4189"
    },
    {
      "cve": "CVE-2021-4209",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer dereference flaw was found in GnuTLS. As Nettle\u0027s hash update functions internally call memcpy, providing zero-length input may cause undefined behavior. This flaw leads to a denial of service after authentication in rare circumstances.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-4209"
    },
    {
      "cve": "CVE-2021-20193",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the src/list.c of tar 1.33 and earlier. This flaw allows an attacker who can submit a crafted input file to tar to cause uncontrolled consumption of memory. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-20193"
    },
    {
      "cve": "CVE-2021-20227",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in SQLite\u0027s SELECT query functionality (src/select.c). This flaw allows an attacker who is capable of running SQL queries locally on the SQLite database to cause a denial of service or possible code execution by triggering a use-after-free. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-20227"
    },
    {
      "cve": "CVE-2021-20231",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in gnutls. A use after free issue in client sending key_share extension may lead to memory corruption and other consequences.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-20231"
    },
    {
      "cve": "CVE-2021-20232",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in gnutls. A use after free issue in client_send_params in lib/ext/pre_shared_key.c may lead to memory corruption and other potential consequences.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-20232"
    },
    {
      "cve": "CVE-2021-20305",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in Nettle in versions before 3.7.2, where several Nettle signature verification functions (GOST DSA, EDDSA \u0026 ECDSA) result in the Elliptic Curve Cryptography point (ECC) multiply function being called with out-of-range scalers, possibly resulting in incorrect results. This flaw allows an attacker to force an invalid signature, causing an assertion failure or possible validation. The highest threat to this vulnerability is to confidentiality, integrity, as well as system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-20305"
    },
    {
      "cve": "CVE-2021-22876",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl 7.1.1 to and including 7.75.0 is vulnerable to an \"Exposure of Private Personal Information to an Unauthorized Actor\" by leaking credentials in the HTTP Referer: header. libcurl does not strip off user credentials from the URL when automatically populating the Referer: HTTP request header field in outgoing HTTP requests, and therefore risks leaking sensitive data to the server that is the target of the second HTTP request.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-22876"
    },
    {
      "cve": "CVE-2021-22890",
      "cwe": {
        "id": "CWE-290",
        "name": "Authentication Bypass by Spoofing"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl 7.63.0 to and including 7.75.0 includes vulnerability that allows a malicious HTTPS proxy to MITM a connection due to bad handling of TLS 1.3 session tickets. When using a HTTPS proxy and TLS 1.3, libcurl can confuse session tickets arriving from the HTTPS proxy but work as if they arrived from the remote server and then wrongly \"short-cut\" the host handshake. When confusing the tickets, a HTTPS proxy can trick libcurl to use the wrong session ticket resume for the host and thereby circumvent the server TLS certificate check and make a MITM attack to be possible to perform unnoticed. Note that such a malicious HTTPS proxy needs to provide a certificate that curl will accept for the MITMed server for an attack to work - unless curl has been told to ignore the server certificate check.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-22890"
    },
    {
      "cve": "CVE-2021-22897",
      "cwe": {
        "id": "CWE-668",
        "name": "Exposure of Resource to Wrong Sphere"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl 7.61.0 through 7.76.1 suffers from exposure of data element to wrong session due to a mistake in the code for CURLOPT_SSL_CIPHER_LIST when libcurl is built to use the Schannel TLS library. The selected cipher set was stored in a single \"static\" variable in the library, which has the surprising side-effect that if an application sets up multiple concurrent transfers, the last one that sets the ciphers will accidentally control the set used by all transfers. In a worst-case scenario, this weakens transport security significantly.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-22897"
    },
    {
      "cve": "CVE-2021-22898",
      "cwe": {
        "id": "CWE-909",
        "name": "Missing Initialization of Resource"
      },
      "notes": [
        {
          "category": "summary",
          "text": "**NOTE: CVE-2021-22898 is an incomplete fix (see https://hackerone.com/reports/1223882)! Check if affected products also have fixed CVE-22925 instead! Do not use CVE-2021-22898 in public advisories!**\r\n\r\ncurl 7.7 through 7.76.1 suffers from an information disclosure when the `-t` command line option, known as `CURLOPT_TELNETOPTIONS` in libcurl, is used to send variable=content pairs to TELNET servers. Due to a flaw in the option parser for sending NEW_ENV variables, libcurl could be made to pass on uninitialized data from a stack based buffer to the server, resulting in potentially revealing sensitive internal information to the server using a clear-text network protocol.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.1,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-22898"
    },
    {
      "cve": "CVE-2021-22901",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl 7.75.0 through 7.76.1 suffers from a use-after-free vulnerability resulting in already freed memory being used when a TLS 1.3 session ticket arrives over a connection. A malicious server can use this in rare unfortunate circumstances to potentially reach remote code execution in the client. When libcurl at run-time sets up support for TLS 1.3 session tickets on a connection using OpenSSL, it stores pointers to the transfer in-memory object for later retrieval when a session ticket arrives. If the connection is used by multiple transfers (like with a reused HTTP/1.1 connection or multiplexed HTTP/2 connection) that first transfer object might be freed before the new session is established on that connection and then the function will access a memory buffer that might be freed. When using that memory, libcurl might even call a function pointer in the object, making it possible for a remote code execution if the server could somehow manage to get crafted memory content into the correct place in memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-22901"
    },
    {
      "cve": "CVE-2021-22922",
      "cwe": {
        "id": "CWE-354",
        "name": "Improper Validation of Integrity Check Value"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl is instructed to download content using the metalink feature, thecontents is verified against a hash provided in the metalink XML file.The metalink XML file points out to the client how to get the same contentfrom a set of different URLs, potentially hosted by different servers and theclient can then download the file from one or several of them. In a serial orparallel manner.If one of the servers hosting the contents has been breached and the contentsof the specific file on that server is replaced with a modified payload, curlshould detect this when the hash of the file mismatches after a completeddownload. It should remove the contents and instead try getting the contentsfrom another URL. This is not done, and instead such a hash mismatch is onlymentioned in text and the potentially malicious content is kept in the file ondisk.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-22922"
    },
    {
      "cve": "CVE-2021-22923",
      "cwe": {
        "id": "CWE-522",
        "name": "Insufficiently Protected Credentials"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl is instructed to get content using the metalink feature, and a user name and password are used to download the metalink XML file, those same credentials are then subsequently passed on to each of the servers from which curl will download or try to download the contents from. Often contrary to the user\u0027s expectations and intentions and without telling the user it happened.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-22923"
    },
    {
      "cve": "CVE-2021-22924",
      "cwe": {
        "id": "CWE-706",
        "name": "Use of Incorrectly-Resolved Name or Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl keeps previously used connections in a connection pool for subsequent transfers to reuse, if one of them matches the setup. Due to errors in the logic, the config matching function did not take \u0027issuercert\u0027 into account and it compared the involved paths *case insensitively*, which could lead to libcurl reusing wrong connections. File paths are, or can be, case sensitive on many systems but not all, and can even vary depending on used file systems. The comparison also didn\u0027t include the \u0027issuer cert\u0027 which a transfer can set to qualify how to verify the server certificate.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-22924"
    },
    {
      "cve": "CVE-2021-22925",
      "cwe": {
        "id": "CWE-908",
        "name": "Use of Uninitialized Resource"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl supports the `-t` command line option, known as `CURLOPT_TELNETOPTIONS` in libcurl. This rarely used option is used to send variable=content pairs to TELNET servers. Due to flaw in the option parser for sending `NEW_ENV` variables, libcurl could be made to pass on uninitialized data from a stack based buffer to the server. Therefore potentially revealing sensitive internal information to the server using a clear-text network protocol. This could happen because curl did not call and use sscanf() correctly when parsing the string provided by the application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-22925"
    },
    {
      "cve": "CVE-2021-22926",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl-using applications can ask for a specific client certificate to be used in a transfer. This is done with the `CURLOPT_SSLCERT` option (`--cert` with the command line tool).When libcurl is built to use the macOS native TLS library Secure Transport, an application can ask for the client certificate by name or with a file name - using the same option. If the name exists as a file, it will be used instead of by name.If the appliction runs with a current working directory that is writable by other users (like `/tmp`), a malicious user can create a file name with the same name as the app wants to use by name, and thereby trick the application to use the file based cert instead of the one referred to by name making libcurl send the wrong client certificate in the TLS connection handshake.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-22926"
    },
    {
      "cve": "CVE-2021-22945",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When sending data to an MQTT server, libcurl \u003c= 7.73.0 and 7.78.0 could in some circumstances erroneously keep a pointer to an already freed memory area and both use that again in a subsequent call to send data and also free it *again*.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-22945"
    },
    {
      "cve": "CVE-2021-22946",
      "cwe": {
        "id": "CWE-319",
        "name": "Cleartext Transmission of Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A user can tell curl \u003e= 7.20.0 and \u003c= 7.78.0 to require a successful upgrade to TLS when speaking to an IMAP, POP3 or FTP server (`--ssl-reqd` on the command line or`CURLOPT_USE_SSL` set to `CURLUSESSL_CONTROL` or `CURLUSESSL_ALL` withlibcurl). This requirement could be bypassed if the server would return a properly crafted but perfectly legitimate response.This flaw would then make curl silently continue its operations **withoutTLS** contrary to the instructions and expectations, exposing possibly sensitive data in clear text over the network.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-22946"
    },
    {
      "cve": "CVE-2021-22947",
      "cwe": {
        "id": "CWE-345",
        "name": "Insufficient Verification of Data Authenticity"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl \u003e= 7.20.0 and \u003c= 7.78.0 connects to an IMAP or POP3 server to retrieve data using STARTTLS to upgrade to TLS security, the server can respond and send back multiple responses at once that curl caches. curl would then upgrade to TLS but not flush the in-queue of cached responses but instead continue using and trustingthe responses it got *before* the TLS handshake as if they were authenticated.Using this flaw, it allows a Man-In-The-Middle attacker to first inject the fake responses, then pass-through the TLS traffic from the legitimate server and trick curl into sending data back to the user thinking the attacker\u0027s injected data comes from the TLS-protected server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-22947"
    },
    {
      "cve": "CVE-2021-23336",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The package python/cpython from 0 and before 3.6.13, from 3.7.0 and before 3.7.10, from 3.8.0 and before 3.8.8, from 3.9.0 and before 3.9.2 are vulnerable to Web Cache Poisoning via urllib.parse.parse_qsl and urllib.parse.parse_qs by using a vector called parameter cloaking. When the attacker can separate query parameters using a semicolon (;), they can cause a difference in the interpretation of the request between the proxy (running with default configuration) and the server. This can result in malicious requests being cached as completely safe ones, as the proxy would usually not see the semicolon as a separator, and therefore would not include it in a cache key of an unkeyed parameter.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:N/I:L/A:H/E:P/RL:U/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-23336"
    },
    {
      "cve": "CVE-2021-27212",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In OpenLDAP through 2.4.57 and 2.5.x through 2.5.1alpha, an assertion failure in slapd can occur in the issuerAndThisUpdateCheck function via a crafted packet, resulting in a denial of service (daemon exit) via a short timestamp. This is related to schema_init.c and checkTime.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-27212"
    },
    {
      "cve": "CVE-2021-27218",
      "cwe": {
        "id": "CWE-681",
        "name": "Incorrect Conversion between Numeric Types"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in GNOME GLib before 2.66.7 and 2.67.x before 2.67.4. If g_byte_array_new_take() was called with a buffer of 4GB or more on a 64-bit platform, the length would be truncated modulo 2**32, causing unintended length truncation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-27218"
    },
    {
      "cve": "CVE-2021-27219",
      "cwe": {
        "id": "CWE-681",
        "name": "Incorrect Conversion between Numeric Types"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in GNOME GLib before 2.66.6 and 2.67.x before 2.67.3. The function g_bytes_new has an integer overflow on 64-bit platforms due to an implicit cast from 64 bits to 32 bits. The overflow could potentially lead to memory corruption.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-27219"
    },
    {
      "cve": "CVE-2021-27645",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The nameserver caching daemon (nscd) in the GNU C Library (aka glibc or libc6) 2.29 through 2.33, when processing a request for netgroup lookup, may crash due to a double-free, potentially resulting in degraded service or Denial of Service on the local system. This is related to netgroupcache.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 2.5,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-27645"
    },
    {
      "cve": "CVE-2021-28041",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ssh-agent in OpenSSH before 8.5 has a double free that may be relevant in a few less-common scenarios, such as unconstrained agent-socket access on a legacy operating system, or the forwarding of an agent to an attacker-controlled host.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:L/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-28041"
    },
    {
      "cve": "CVE-2021-28153",
      "cwe": {
        "id": "CWE-59",
        "name": "Improper Link Resolution Before File Access (\u0027Link Following\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in GNOME GLib before 2.66.8. When g_file_replace() is used with G_FILE_CREATE_REPLACE_DESTINATION to replace a path that is a dangling symlink, it incorrectly also creates the target of the symlink as an empty file, which could conceivably have security relevance if the symlink is attacker-controlled. (If the path is a symlink to a file that already exists, then the contents of that file correctly remain unchanged.)",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-28153"
    },
    {
      "cve": "CVE-2021-28363",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The urllib3 library 1.26.x before 1.26.4 for Python omits SSL certificate validation in some cases involving HTTPS to HTTPS proxies. The initial connection to the HTTPS proxy (if an SSLContext isn\u0027t given via proxy_config) doesn\u0027t verify the hostname of the certificate. This means certificates for different servers that still validate properly with the default urllib3 SSLContext will be silently accepted.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-28363"
    },
    {
      "cve": "CVE-2021-28861",
      "cwe": {
        "id": "CWE-601",
        "name": "URL Redirection to Untrusted Site (\u0027Open Redirect\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Python 3.x through 3.10 has an open redirection vulnerability in lib/http/server.py due to no protection against multiple (/) at the beginning of URI path which may leads to information disclosure. NOTE: this is disputed by a third party because the http.server.html documentation page states \"Warning: http.server is not recommended for production. It only implements basic security checks.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-28861"
    },
    {
      "cve": "CVE-2021-31239",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue found in SQLite SQLite3 v.3.35.4 that could allow a remote attacker to cause a denial of service via the appendvfs.c function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-31239"
    },
    {
      "cve": "CVE-2021-32292",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in json-c from 20200420 (post 0.14 unreleased code) through 0.15-20200726. A stack-buffer-overflow exists in the auxiliary sample program json_parse which is located in the function parseit.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-32292"
    },
    {
      "cve": "CVE-2021-33294",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In elfutils 0.183, an infinite loop was found in the function handle_symtab in readelf.c .Which allows attackers to cause a denial of service (infinite loop) via crafted file.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-33294"
    },
    {
      "cve": "CVE-2021-33560",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Libgcrypt before 1.8.8 and 1.9.x before 1.9.3 mishandles ElGamal encryption because it lacks exponent blinding to address a side-channel attack against mpi_powm, and the window size is not chosen appropriately. This, for example, affects use of ElGamal in OpenPGP.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-33560"
    },
    {
      "cve": "CVE-2021-33574",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The mq_notify function in the GNU C Library (aka glibc) versions 2.32 and 2.33 has a use-after-free. It may use the notification thread attributes object (passed through its struct sigevent parameter) after it has been freed by the caller, leading to a denial of service (application crash) or possibly unspecified other impact.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-33574"
    },
    {
      "cve": "CVE-2021-33910",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The use of alloca function with an uncontrolled size in function unit_name_path_escape allows a local attacker, able to mount a filesystem on a very long path, to crash systemd and the whole system by allocating a very large space in the stack.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-33910"
    },
    {
      "cve": "CVE-2021-35942",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The wordexp function in the GNU C Library (aka glibc) through 2.33 may crash or read arbitrary memory in parse_param (in posix/wordexp.c) when called with an untrusted, crafted pattern, potentially resulting in a denial of service or disclosure of information. This occurs because atoi was used but strtoul should have been used to ensure correct calculations.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-35942"
    },
    {
      "cve": "CVE-2021-36084",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The CIL compiler in SELinux 3.2 has a use-after-free in __cil_verify_classperms (called from __cil_verify_classpermission and __cil_pre_verify_helper).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-36084"
    },
    {
      "cve": "CVE-2021-36085",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The CIL compiler in SELinux 3.2 has a use-after-free in __cil_verify_classperms (called from __verify_map_perm_classperms and hashtab_map).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-36085"
    },
    {
      "cve": "CVE-2021-36086",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The CIL compiler in SELinux 3.2 has a use-after-free in cil_reset_classpermission (called from cil_reset_classperms_set and cil_reset_classperms_list).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-36086"
    },
    {
      "cve": "CVE-2021-36087",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The CIL compiler in SELinux 3.2 has a heap-based buffer over-read in ebitmap_match_any (called indirectly from cil_check_neverallow). This occurs because there is sometimes a lack of checks for invalid statements in an optional block.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-36087"
    },
    {
      "cve": "CVE-2021-36222",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ec_verify in kdc/kdc_preauth_ec.c in the Key Distribution Center (KDC) in MIT Kerberos 5 (aka krb5) before 1.18.4 and 1.19.x before 1.19.2 allows remote attackers to cause a NULL pointer dereference and daemon crash. This occurs because a return value is not properly managed in a certain situation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-36222"
    },
    {
      "cve": "CVE-2021-36690",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A segmentation fault can occur in the sqlite3.exe command-line component of SQLite 3.36.0 via the idxGetTableInfo function when there is a crafted SQL query. NOTE: the vendor disputes the relevance of this report because a sqlite3.exe user already has full privileges (e.g., is intentionally allowed to execute commands). This report does NOT imply any problem in the SQLite library.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-36690"
    },
    {
      "cve": "CVE-2021-37600",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer overflow in util-linux through 2.37.1 can potentially cause a buffer overflow if an attacker were able to use system resources in a way that leads to a large number in the /proc/sysvipc/sem file. NOTE: this is unexploitable in GNU C Library environments, and possibly in all realistic environments",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-37600"
    },
    {
      "cve": "CVE-2021-37750",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The Key Distribution Center (KDC) in MIT Kerberos 5 (aka krb5) before 1.18.5 and 1.19.x before 1.19.3 has a NULL pointer dereference in kdc/do_tgs_req.c via a FAST inner body that lacks a server field.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-37750"
    },
    {
      "cve": "CVE-2021-38604",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In librt in the GNU C Library (aka glibc) through 2.34, sysdeps/unix/sysv/linux/mq_notify.c mishandles certain NOTIFY_REMOVED data, leading to a NULL pointer dereference. NOTE: this vulnerability was introduced as a side effect of the CVE-2021-33574 fix.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-38604"
    },
    {
      "cve": "CVE-2021-41617",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "sshd in OpenSSH 6.2 through 8.x before 8.8, when certain non-default configurations are used, allows privilege escalation because supplemental groups are not initialized as expected. Helper programs for AuthorizedKeysCommand and AuthorizedPrincipalsCommand may run with privileges associated with group memberships of the sshd process, if the configuration specifies running the command as a different user.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-41617"
    },
    {
      "cve": "CVE-2021-43396",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "** DISPUTED ** In iconvdata/iso-2022-jp-3.c in the GNU C Library (aka glibc) 2.34, remote attackers can force iconv() to emit a spurious \u0027\\0\u0027 character via crafted ISO-2022-JP-3 data that is accompanied by an internal state reset. This may affect data integrity in certain iconv() use cases. NOTE: the vendor states \"the bug cannot be invoked through user input and requires iconv to be invoked with a NULL inbuf, which ought to require a separate application bug to do so unintentionally. Hence there\u0027s no security impact to the bug.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-43396"
    },
    {
      "cve": "CVE-2021-43618",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU Multiple Precision Arithmetic Library (GMP) through 6.2.1 has an mpz/inp_raw.c integer overflow and resultant buffer overflow via crafted input, leading to a segmentation fault on 32-bit platforms.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-43618"
    },
    {
      "cve": "CVE-2021-44879",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In gc_data_segment in fs/f2fs/gc.c in the Linux kernel before 5.16.3, special files are not considered, leading to a move_data_page NULL pointer dereference.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-44879"
    },
    {
      "cve": "CVE-2021-45960",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Expat (aka libexpat) before 2.4.3, a left shift by 29 (or more) places in the storeAtts function in xmlparse.c can lead to realloc misbehavior (e.g., allocating too few bytes, or only freeing memory).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-45960"
    },
    {
      "cve": "CVE-2021-46143",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In doProlog in xmlparse.c in Expat (aka libexpat) before 2.4.3, an integer overflow exists for m_groupSize.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-46143"
    },
    {
      "cve": "CVE-2021-46195",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GCC v12.0 was discovered to contain an uncontrolled recursion via the component libiberty/rust-demangle.c. This vulnerability allows attackers to cause a Denial of Service (DoS) by consuming excessive CPU and memory resources.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-46195"
    },
    {
      "cve": "CVE-2021-46828",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libtirpc before 1.3.3rc1, remote attackers could exhaust the file descriptors of a process that uses libtirpc because idle TCP connections are mishandled. This can, in turn, lead to an svc_run infinite loop without accepting new connections.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-46828"
    },
    {
      "cve": "CVE-2021-46848",
      "cwe": {
        "id": "CWE-193",
        "name": "Off-by-one Error"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU Libtasn1 before 4.19.0 has an ETYPE_OK off-by-one array size check that affects asn1_encode_simple_der.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-46848"
    },
    {
      "cve": "CVE-2022-0391",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in Python, specifically within the urllib.parse module. This module helps break Uniform Resource Locator (URL) strings into components. The issue involves how the urlparse method does not sanitize input and allows characters like \u0027\\r\u0027 and \u0027\\n\u0027 in the URL path. This flaw allows an attacker to input a crafted URL, leading to injection attacks. This flaw affects Python versions prior to 3.10.0b1, 3.9.5, 3.8.11, 3.7.11 and 3.6.14.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-0391"
    },
    {
      "cve": "CVE-2022-0563",
      "cwe": {
        "id": "CWE-209",
        "name": "Generation of Error Message Containing Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the util-linux chfn and chsh utilities when compiled with Readline support. The Readline library uses an \"INPUTRC\" environment variable to get a path to the library config file. When the library cannot parse the specified file, it prints an error message containing data from the file. This flaw allows an unprivileged user to read root-owned files, potentially leading to privilege escalation. This flaw affects util-linux versions prior to 2.37.4.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-0563"
    },
    {
      "cve": "CVE-2022-0778",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The BN_mod_sqrt() function in openSSL, which computes a modular square root, contains a bug that can cause it to loop forever for non-prime moduli. Internally this function is used when parsing certificates that contain elliptic curve public keys in compressed form or explicit elliptic curve parameters with a base point encoded in compressed form. It is possible to trigger the infinite loop by crafting a certificate that has invalid explicit curve parameters. Since certificate parsing happens prior to verification of the certificate signature, any process that parses an externally supplied certificate may thus be subject to a denial of service attack. The infinite loop can also be reached when parsing crafted private keys as they can contain explicit elliptic curve parameters.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-0778"
    },
    {
      "cve": "CVE-2022-1271",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An arbitrary file write vulnerability was found in GNU gzip\u0027s zgrep utility. When zgrep is applied on the attacker\u0027s chosen file name (for example, a crafted file name), this can overwrite an attacker\u0027s content to an arbitrary attacker-selected file. This flaw occurs due to insufficient validation when processing filenames with two or more newlines where selected content and the target file names are embedded in crafted multi-line file names. This flaw allows a remote, low privileged attacker to force zgrep to write arbitrary files on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-1271"
    },
    {
      "cve": "CVE-2022-1292",
      "cwe": {
        "id": "CWE-78",
        "name": "Improper Neutralization of Special Elements used in an OS Command (\u0027OS Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The c_rehash script does not properly sanitise shell metacharacters to prevent command injection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-1292"
    },
    {
      "cve": "CVE-2022-1304",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds read/write vulnerability was found in e2fsprogs 1.46.5. This issue leads to a segmentation fault and possibly arbitrary code execution via a specially crafted filesystem.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-1304"
    },
    {
      "cve": "CVE-2022-1343",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Under certain circumstances, the command line OCSP verify function reports successful verification when the verification in fact failed. In this case the incorrect successful response will also be accompanied by error messages showing the failure and contradicting the apparently successful result.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-1343"
    },
    {
      "cve": "CVE-2022-1434",
      "cwe": {
        "id": "CWE-327",
        "name": "Use of a Broken or Risky Cryptographic Algorithm"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When using the RC4-MD5 ciphersuite, which is disabled by default, an attacker is able to modify data in transit due to an incorrect use of the AAD data as the MAC key in OpenSSL 3.0. An attacker is not able to decrypt any communication.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-1434"
    },
    {
      "cve": "CVE-2022-1473",
      "cwe": {
        "id": "CWE-404",
        "name": "Improper Resource Shutdown or Release"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The used OpenSSL version improperly reuses memory when decoding certificates or keys. This can lead to a process termination and Denial of Service for long lived processes.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-1473"
    },
    {
      "cve": "CVE-2022-2068",
      "cwe": {
        "id": "CWE-78",
        "name": "Improper Neutralization of Special Elements used in an OS Command (\u0027OS Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In addition to the c_rehash shell command injection identified in CVE-2022-1292, further circumstances where the c_rehash script does not properly sanitise shell metacharacters to prevent command injection were found by code review. When the CVE-2022-1292 was fixed it was not discovered that there are other places in the script where the file names of certificates being hashed were possibly passed to a command executed through the shell. This script is distributed by some operating systems in a manner where it is automatically executed. On such operating systems, an attacker could execute arbitrary commands with the privileges of the script. Use of the c_rehash script is considered obsolete and should be replaced by the OpenSSL rehash command line tool.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-2068"
    },
    {
      "cve": "CVE-2022-2097",
      "cwe": {
        "id": "CWE-326",
        "name": "Inadequate Encryption Strength"
      },
      "notes": [
        {
          "category": "summary",
          "text": "AES OCB mode for 32-bit x86 platforms using the AES-NI assembly optimised implementation will not encrypt the entirety of the data under some circumstances. This could reveal sixteen bytes of data that was preexisting in the memory that wasn\u0027t written. In the special case of \"in place\" encryption, sixteen bytes of the plaintext would be revealed. Since OpenSSL does not support OCB based cipher suites for TLS and DTLS, they are both unaffected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-2097"
    },
    {
      "cve": "CVE-2022-2274",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The OpenSSL 3.0.4 release introduced a serious bug in the RSA implementation for X86_64 CPUs supporting the AVX512IFMA instructions. This issue makes the RSA implementation with 2048 bit private keys incorrect on such machines and memory corruption will happen during the computation. As a consequence of the memory corruption an attacker may be able to trigger a remote code execution on the machine performing the computation. SSL/TLS servers or other servers using 2048 bit RSA private keys running on machines supporting AVX512IFMA instructions of the X86_64 architecture are affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-2274"
    },
    {
      "cve": "CVE-2022-2509",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability found in gnutls. This security flaw happens because of a double free error occurs during verification of pkcs7 signatures in gnutls_pkcs7_verify function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-2509"
    },
    {
      "cve": "CVE-2022-3715",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the bash package, where a heap-buffer overflow can occur in valid parameter_transform. This issue may lead to memory problems.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-3715"
    },
    {
      "cve": "CVE-2022-3821",
      "cwe": {
        "id": "CWE-193",
        "name": "Off-by-one Error"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An off-by-one Error issue was discovered in Systemd in format_timespan() function of time-util.c. An attacker could supply specific values for time and accuracy that leads to buffer overrun in format_timespan(), leading to a Denial of Service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-3821"
    },
    {
      "cve": "CVE-2022-4304",
      "cwe": {
        "id": "CWE-326",
        "name": "Inadequate Encryption Strength"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A timing based side channel exists in the OpenSSL RSA Decryption implementation which could be sufficient to recover a plaintext across a network in a Bleichenbacher style attack. To achieve a successful decryption an attacker would have to be able to send a very large number of trial messages for decryption. The vulnerability affects all RSA padding modes: PKCS#1 v1.5, RSA-OEAP and RSASVE. For example, in a TLS connection, RSA is commonly used by a client to send an encrypted pre-master secret to the server. An attacker that had observed a genuine connection between a client and a server could use this flaw to send trial messages to the server and record the time taken to process them. After a sufficiently large number of messages the attacker could recover the pre-master secret used for the original connection and thus be able to decrypt the application data sent over that connection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Disable the use of RSA ciphers in the web server configuration; note that RSA ciphers are disabled by default",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-4304"
    },
    {
      "cve": "CVE-2022-4450",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The function PEM_read_bio_ex() reads a PEM file from a BIO and parses and decodes the \"name\" (e.g. \"CERTIFICATE\"), any header data and the payload data. If the function succeeds then the \"name_out\", \"header\" and \"data\" arguments are populated with pointers to buffers containing the relevant decoded data. The caller is responsible for freeing those buffers. It is possible to construct a PEM file that results in 0 bytes of payload data. In this case PEM_read_bio_ex() will return a failure code but will populate the header argument with a pointer to a buffer that has already been freed. If the caller also frees this buffer then a double free will occur. This will most likely lead to a crash. This could be exploited by an attacker who has the ability to supply malicious PEM files for parsing to achieve a denial of service attack. The functions PEM_read_bio() and PEM_read() are simple wrappers around PEM_read_bio_ex() and therefore these functions are also directly affected. These functions are also called indirectly by a number of other OpenSSL functions including PEM_X509_INFO_read_bio_ex() and SSL_CTX_use_serverinfo_file() which are also vulnerable. Some OpenSSL internal uses of these functions are not vulnerable because the caller does not free the header argument if PEM_read_bio_ex() returns a failure code. These locations include the PEM_read_bio_TYPE() functions as well as the decoders introduced in OpenSSL 3.0. The OpenSSL asn1parse command line application is also impacted by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Do not import or configure certificate files in PEM format from untrusted sources",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-4450"
    },
    {
      "cve": "CVE-2022-22576",
      "cwe": {
        "id": "CWE-287",
        "name": "Improper Authentication"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S), IMAP(S), POP3(S) and LDAP(S) (openldap only).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-22576"
    },
    {
      "cve": "CVE-2022-22822",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "addBinding in xmlparse.c in Expat (aka libexpat) before 2.4.3 has an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-22822"
    },
    {
      "cve": "CVE-2022-22823",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "build_model in xmlparse.c in Expat (aka libexpat) before 2.4.3 has an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-22823"
    },
    {
      "cve": "CVE-2022-22824",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "defineAttribute in xmlparse.c in Expat (aka libexpat) before 2.4.3 has an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-22824"
    },
    {
      "cve": "CVE-2022-22825",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "lookup in xmlparse.c in Expat (aka libexpat) before 2.4.3 has an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-22825"
    },
    {
      "cve": "CVE-2022-22826",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nextScaffoldPart in xmlparse.c in Expat (aka libexpat) before 2.4.3 has an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-22826"
    },
    {
      "cve": "CVE-2022-22827",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "storeAtts in xmlparse.c in Expat (aka libexpat) before 2.4.3 has an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-22827"
    },
    {
      "cve": "CVE-2022-23218",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The deprecated compatibility function svcunix_create in the sunrpc module of the GNU C Library (aka glibc) through 2.34 copies its path argument on the stack without validating its length, which may result in a buffer overflow, potentially resulting in a denial of service or (if an application is not built with a stack protector enabled) arbitrary code execution.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-23218"
    },
    {
      "cve": "CVE-2022-23219",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The deprecated compatibility function clnt_create in the sunrpc module of the GNU C Library (aka glibc) through 2.34 copies its hostname argument on the stack without validating its length, which may result in a buffer overflow, potentially resulting in a denial of service or (if an application is not built with a stack protector enabled) arbitrary code execution.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-23219"
    },
    {
      "cve": "CVE-2022-23308",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "valid.c in libxml2 before 2.9.13 has a use-after-free of ID and IDREF attributes.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-23308"
    },
    {
      "cve": "CVE-2022-23852",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Expat (aka libexpat) before 2.4.4 has a signed integer overflow in XML_GetBuffer, for configurations with a nonzero XML_CONTEXT_BYTES.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-23852"
    },
    {
      "cve": "CVE-2022-23990",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Expat (aka libexpat) before 2.4.4 has an integer overflow in the doProlog function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-23990"
    },
    {
      "cve": "CVE-2022-24407",
      "cwe": {
        "id": "CWE-89",
        "name": "Improper Neutralization of Special Elements used in an SQL Command (\u0027SQL Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Cyrus SASL 2.1.17 through 2.1.27 before 2.1.28, plugins/sql.c does not escape the password for a SQL INSERT or UPDATE statement.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-24407"
    },
    {
      "cve": "CVE-2022-25235",
      "cwe": {
        "id": "CWE-116",
        "name": "Improper Encoding or Escaping of Output"
      },
      "notes": [
        {
          "category": "summary",
          "text": "xmltok_impl.c in Expat (aka libexpat) before 2.4.5 lacks certain validation of encoding, such as checks for whether a UTF-8 character is valid in a certain context.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-25235"
    },
    {
      "cve": "CVE-2022-25236",
      "cwe": {
        "id": "CWE-668",
        "name": "Exposure of Resource to Wrong Sphere"
      },
      "notes": [
        {
          "category": "summary",
          "text": "xmlparse.c in Expat (aka libexpat) before 2.4.5 allows attackers to insert namespace-separator characters into namespace URIs.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-25236"
    },
    {
      "cve": "CVE-2022-25313",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Expat (aka libexpat) before 2.4.5, an attacker can trigger stack exhaustion in build_model via a large nesting depth in the DTD element.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-25313"
    },
    {
      "cve": "CVE-2022-25314",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Expat (aka libexpat) before 2.4.5, there is an integer overflow in copyString.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-25314"
    },
    {
      "cve": "CVE-2022-25315",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Expat (aka libexpat) before 2.4.5, there is an integer overflow in storeRawNames.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-25315"
    },
    {
      "cve": "CVE-2022-26488",
      "cwe": {
        "id": "CWE-426",
        "name": "Untrusted Search Path"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Python before 3.10.3 on Windows, local users can gain privileges because the search path is inadequately secured. The installer may allow a local attacker to add user-writable directories to the system search path. To exploit, an administrator must have installed Python for all users and enabled PATH entries. A non-administrative user can trigger a repair that incorrectly adds user-writable paths into PATH, enabling search-path hijacking of other users and system services. This affects Python (CPython) through 3.7.12, 3.8.x through 3.8.12, 3.9.x through 3.9.10, and 3.10.x through 3.10.2.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-26488"
    },
    {
      "cve": "CVE-2022-27774",
      "cwe": {
        "id": "CWE-522",
        "name": "Insufficiently Protected Credentials"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with authentication could leak credentials to other services that exist on different protocols or port numbers.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:R/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-27774"
    },
    {
      "cve": "CVE-2022-27775",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An information disclosure vulnerability exists in curl 7.65.0 to 7.82.0 are vulnerable that by using an IPv6 address that was in the connection pool but with a different zone id it could reuse a connection instead.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-27775"
    },
    {
      "cve": "CVE-2022-27776",
      "cwe": {
        "id": "CWE-522",
        "name": "Insufficiently Protected Credentials"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or cookie header data on HTTP redirects to the same host but another port number.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-27776"
    },
    {
      "cve": "CVE-2022-27778",
      "cwe": {
        "id": "CWE-706",
        "name": "Use of Incorrectly-Resolved Name or Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use of incorrectly resolved name vulnerability fixed in 7.83.1 might remove the wrong file when `--no-clobber` is used together with `--remove-on-error`.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-27778"
    },
    {
      "cve": "CVE-2022-27779",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl wrongly allows cookies to be set for Top Level Domains (TLDs) if thehost name is provided with a trailing dot.curl can be told to receive and send cookies. curl\u0027s \"cookie engine\" can bebuilt with or without [Public Suffix List](https://publicsuffix.org/)awareness. If PSL support not provided, a more rudimentary check exists to atleast prevent cookies from being set on TLDs. This check was broken if thehost name in the URL uses a trailing dot.This can allow arbitrary sites to set cookies that then would get sent to adifferent and unrelated site or domain.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-27779"
    },
    {
      "cve": "CVE-2022-27780",
      "cwe": {
        "id": "CWE-918",
        "name": "Server-Side Request Forgery (SSRF)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The curl URL parser wrongly accepts percent-encoded URL separators like \u0027/\u0027when decoding the host name part of a URL, making it a *different* URL usingthe wrong host name when it is later retrieved.For example, a URL like `http://example.com%2F127.0.0.1/`, would be allowed bythe parser and get transposed into `http://example.com/127.0.0.1/`. This flawcan be used to circumvent filters, checks and more.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-27780"
    },
    {
      "cve": "CVE-2022-27781",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl provides the `CURLOPT_CERTINFO` option to allow applications torequest details to be returned about a server\u0027s certificate chain.Due to an erroneous function, a malicious server could make libcurl built withNSS get stuck in a never-ending busy-loop when trying to retrieve thatinformation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-27781"
    },
    {
      "cve": "CVE-2022-27782",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl would reuse a previously created connection even when a TLS or SSHrelated option had been changed that should have prohibited reuse.libcurl keeps previously used connections in a connection pool for subsequenttransfers to reuse if one of them matches the setup. However, several TLS andSSH settings were left out from the configuration match checks, making themmatch too easily.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-27782"
    },
    {
      "cve": "CVE-2022-27943",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libiberty/rust-demangle.c in GNU GCC 11.2 allows stack consumption in demangle_const, as demonstrated by nm-new.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-27943"
    },
    {
      "cve": "CVE-2022-28321",
      "cwe": {
        "id": "CWE-287",
        "name": "Improper Authentication"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The Linux-PAM package before 1.5.2-6.1 for openSUSE Tumbleweed allows authentication bypass for SSH logins. The pam_access.so module doesn\u0027t correctly restrict login if a user tries to connect from an IP address that is not resolvable via DNS. In such conditions, a user with denied access to a machine can still get access. NOTE: the relevance of this issue is largely limited to openSUSE Tumbleweed and openSUSE Factory; it does not affect Linux-PAM upstream.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-28321"
    },
    {
      "cve": "CVE-2022-29155",
      "cwe": {
        "id": "CWE-89",
        "name": "Improper Neutralization of Special Elements used in an SQL Command (\u0027SQL Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In OpenLDAP 2.x before 2.5.12 and 2.6.x before 2.6.2, a SQL injection vulnerability exists in the experimental back-sql backend to slapd, via a SQL statement within an LDAP query. This can occur during an LDAP search operation when the search filter is processed, due to a lack of proper escaping.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-29155"
    },
    {
      "cve": "CVE-2022-29824",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libxml2 before 2.9.14, several buffer handling functions in buf.c (xmlBuf*) and tree.c (xmlBuffer*) don\u0027t check for integer overflows. This can result in out-of-bounds memory writes. Exploitation requires a victim to open a crafted, multi-gigabyte XML file. Other software using libxml2\u0027s buffer functions, for example libxslt through 1.1.35, is affected as well.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-29824"
    },
    {
      "cve": "CVE-2022-30115",
      "cwe": {
        "id": "CWE-319",
        "name": "Cleartext Transmission of Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Using its HSTS support, curl can be instructed to use HTTPS directly insteadof using an insecure clear-text HTTP step even when HTTP is provided in theURL. This mechanism could be bypassed if the host name in the given URL used atrailing dot while not using one when it built the HSTS cache. Or the otherway around - by having the trailing dot in the HSTS cache and *not* using thetrailing dot in the URL.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-30115"
    },
    {
      "cve": "CVE-2022-32205",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A malicious server can serve excessive amounts of \"Set-Cookie:\" headers in a HTTP response to curl and curl \u003c 7.84.0 stores all of them. A sufficiently large amount of (big) cookies make subsequent HTTP requests to this, or other servers to which the cookies match, create requests that become larger than the threshold that curl uses internally to avoid sending crazy large requests (1048576 bytes) and instead returns an error.This denial state might remain for as long as the same cookies are kept, match and haven\u0027t expired. Due to cookie matching rules, a server on \"foo.example.com\" can set cookies that also would match for \"bar.example.com\", making it it possible for a \"sister server\" to effectively cause a denial of service for a sibling site on the same second level domain using this method.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-32205"
    },
    {
      "cve": "CVE-2022-32206",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl \u003c 7.84.0 supports \"chained\" HTTP compression algorithms, meaning that a serverresponse can be compressed multiple times and potentially with different algorithms. The number of acceptable \"links\" in this \"decompression chain\" was unbounded, allowing a malicious server to insert a virtually unlimited number of compression steps.The use of such a decompression chain could result in a \"malloc bomb\", makingcurl end up spending enormous amounts of allocated heap memory, or trying toand returning out of memory errors.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-32206"
    },
    {
      "cve": "CVE-2022-32207",
      "cwe": {
        "id": "CWE-276",
        "name": "Incorrect Default Permissions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl \u003c 7.84.0 saves cookies, alt-svc and hsts data to local files, it makes the operation atomic by finalizing the operation with a rename from a temporary name to the final target file name.In that rename operation, it might accidentally *widen* the permissions for the target file, leaving the updated file accessible to more users than intended.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-32207"
    },
    {
      "cve": "CVE-2022-32208",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl \u003c 7.84.0 does FTP transfers secured by krb5, it handles message verification failures wrongly. This flaw makes it possible for a Man-In-The-Middle attack to go unnoticed and even allows it to inject data to the client.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-32208"
    },
    {
      "cve": "CVE-2022-32221",
      "cwe": {
        "id": "CWE-440",
        "name": "Expected Behavior Violation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When doing HTTP(S) transfers, libcurl might erroneously use the read callback (`CURLOPT_READFUNCTION`) to ask for data to send, even when the `CURLOPT_POSTFIELDS` option has been set, if the same handle previously was used to issue a `PUT` request which used that callback. This flaw may surprise the application and cause it to misbehave and either send off the wrong data or use memory after free or similar in the subsequent `POST` request. The problem exists in the logic for a reused handle when it is changed from a PUT to a POST.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.2,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-32221"
    },
    {
      "cve": "CVE-2022-35252",
      "cwe": {
        "id": "CWE-1286",
        "name": "Improper Validation of Syntactic Correctness of Input"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl is used to retrieve and parse cookies from a HTTP(S) server, itaccepts cookies using control codes that when later are sent back to a HTTPserver might make the server return 400 responses. Effectively allowing a\"sister site\" to deny service to all siblings.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-35252"
    },
    {
      "cve": "CVE-2022-35260",
      "cwe": {
        "id": "CWE-121",
        "name": "Stack-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl can be told to parse a `.netrc` file for credentials. If that file endsin a line with 4095 consecutive non-white space letters and no newline, curlwould first read past the end of the stack-based buffer, and if the readworks, write a zero byte beyond its boundary.This will in most cases cause a segfault or similar, but circumstances might also cause different outcomes.If a malicious user can provide a custom netrc file to an application or otherwise affect its contents, this flaw could be used as denial-of-service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.6,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-35260"
    },
    {
      "cve": "CVE-2022-35737",
      "cwe": {
        "id": "CWE-129",
        "name": "Improper Validation of Array Index"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite 1.0.12 through 3.39.x before 3.39.2 sometimes allows an array-bounds overflow if billions of bytes are used in a string argument to a C API.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-35737"
    },
    {
      "cve": "CVE-2022-37434",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "zlib through 1.2.12 has a heap-based buffer over-read or buffer overflow in inflate in inflate.c via a large gzip header extra field. NOTE: only applications that call inflateGetHeader are affected. Some common applications bundle the affected zlib source code but may be unable to call inflateGetHeader (e.g., see the nodejs/node reference).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-37434"
    },
    {
      "cve": "CVE-2022-37454",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The Keccak XKCP SHA-3 reference implementation before fdc6fef has an integer overflow and resultant buffer overflow that allows attackers to execute arbitrary code or eliminate expected cryptographic properties. This occurs in the sponge function interface.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-37454"
    },
    {
      "cve": "CVE-2022-40303",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.10.3. When parsing a multi-gigabyte XML document with the XML_PARSE_HUGE parser option enabled, several integer counters can overflow. This results in an attempt to access an array at a negative 2GB offset, typically leading to a segmentation fault.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-40303"
    },
    {
      "cve": "CVE-2022-40304",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.10.3. Certain invalid XML entity definitions can corrupt a hash table key, potentially leading to subsequent logic errors. In one case, a double-free can be provoked.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-40304"
    },
    {
      "cve": "CVE-2022-40674",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libexpat before 2.4.9 has a use-after-free in the doContent function in xmlparse.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-40674"
    },
    {
      "cve": "CVE-2022-42898",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "PAC parsing in MIT Kerberos 5 (aka krb5) before 1.19.4 and 1.20.x before 1.20.1 has integer overflows that may lead to remote code execution (in KDC, kadmind, or a GSS or Kerberos application server) on 32-bit platforms (which have a resultant heap-based buffer overflow), and cause a denial of service on other platforms. This occurs in krb5_pac_parse in lib/krb5/krb/pac.c. Heimdal before 7.7.1 has \"a similar bug.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-42898"
    },
    {
      "cve": "CVE-2022-42915",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl before 7.86.0 has a double free. If curl is told to use an HTTP proxy for a transfer with a non-HTTP(S) URL, it sets up the connection to the remote server by issuing a CONNECT request to the proxy, and then tunnels the rest of the protocol through. An HTTP proxy might refuse this request (HTTP proxies often only allow outgoing connections to specific port numbers, like 443 for HTTPS) and instead return a non-200 status code to the client. Due to flaws in the error/cleanup handling, this could trigger a double free in curl if one of the following schemes were used in the URL for the transfer: dict, gopher, gophers, ldap, ldaps, rtmp, rtmps, or telnet. The earliest affected version is 7.77.0.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-42915"
    },
    {
      "cve": "CVE-2022-42916",
      "cwe": {
        "id": "CWE-319",
        "name": "Cleartext Transmission of Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In curl before 7.86.0, the HSTS check could be bypassed to trick it into staying with HTTP. Using its HSTS support, curl can be instructed to use HTTPS directly (instead of using an insecure cleartext HTTP step) even when HTTP is provided in the URL. This mechanism could be bypassed if the host name in the given URL uses IDN characters that get replaced with ASCII counterparts as part of the IDN conversion, e.g., using the character UTF-8 U+3002 (IDEOGRAPHIC FULL STOP) instead of the common ASCII full stop of U+002E (.). The earliest affected version is 7.77.0 2021-05-26.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-42916"
    },
    {
      "cve": "CVE-2022-43551",
      "cwe": {
        "id": "CWE-319",
        "name": "Cleartext Transmission of Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability exists in curl \u003c7.87.0 HSTS check that could be bypassed to trick it to keep using HTTP. Using its HSTS support, curl can be instructed to use HTTPS instead of using an insecure clear-text HTTP step even when HTTP is provided in the URL. However, the HSTS mechanism could be bypassed if the host name in the given URL first uses IDN characters that get replaced to ASCII counterparts as part of the IDN conversion. Like using the character UTF-8 U+3002 (IDEOGRAPHIC FULL STOP) instead of the common ASCII full stop U+002E (.). Then in a subsequent request, it does not detect the HSTS state and makes a clear text transfer. Because it would store the info IDN encoded but look for it IDN decoded.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-43551"
    },
    {
      "cve": "CVE-2022-43552",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl can be asked to tunnel virtually all protocols it supports through an HTTP proxy. HTTP proxies can (and often do) deny such tunnel operations using an appropriate HTTP error response code. When getting denied to tunnel the specific protocols SMB or TELNET, curl would use a heap-allocated struct after it had been freed, in its transfer shutdown code path.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-43552"
    },
    {
      "cve": "CVE-2022-43680",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libexpat through 2.4.9, there is a use-after free caused by overeager destruction of a shared DTD in XML_ExternalEntityParserCreate in out-of-memory situations.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-43680"
    },
    {
      "cve": "CVE-2022-45061",
      "cwe": {
        "id": "CWE-407",
        "name": "Inefficient Algorithmic Complexity"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in Python before 3.11.1. An unnecessary quadratic algorithm exists in one path when processing some inputs to the IDNA (RFC 3490) decoder, such that a crafted, unreasonably long name being presented to the decoder could lead to a CPU denial of service. Hostnames are often supplied by remote servers that could be controlled by a malicious actor; in such a scenario, they could trigger excessive CPU consumption on the client attempting to make use of an attacker-supplied supposed hostname. For example, the attack payload could be placed in the Location header of an HTTP response with status code 302. A fix is planned in 3.11.1, 3.10.9, 3.9.16, 3.8.16, and 3.7.16.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-45061"
    },
    {
      "cve": "CVE-2022-45873",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "systemd 250 and 251 allows local users to achieve a systemd-coredump deadlock by triggering a crash that has a long backtrace. This occurs in parse_elf_object in shared/elf-util.c. The exploitation methodology is to crash a binary calling the same function recursively, and put it in a deeply nested directory to make its backtrace large enough to cause the deadlock. This must be done 16 times when MaxConnections=16 is set for the systemd/units/systemd-coredump.socket file.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-45873"
    },
    {
      "cve": "CVE-2022-46908",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite through 3.40.0, when relying on --safe for execution of an untrusted CLI script, does not properly implement the azProhibitedFunctions protection mechanism, and instead allows UDF functions such as WRITEFILE.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.3,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-46908"
    },
    {
      "cve": "CVE-2022-48303",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU Tar through 1.34 has a one-byte out-of-bounds read that results in use of uninitialized memory for a conditional jump. Exploitation to change the flow of control has not been demonstrated. The issue occurs in from_header in list.c via a V7 archive in which mtime has approximately 11 whitespace characters.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-48303"
    },
    {
      "cve": "CVE-2022-48522",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Perl 5.34.0, function S_find_uninit_var in sv.c has a stack-based crash that can lead to remote code execution or local privilege escalation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-48522"
    },
    {
      "cve": "CVE-2022-48560",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free exists in Python through 3.9 via heappushpop in heapq.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-48560"
    },
    {
      "cve": "CVE-2023-0215",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The public API function BIO_new_NDEF is a helper function used for streaming ASN.1 data via a BIO. It is primarily used internally to OpenSSL to support the SMIME, CMS and PKCS7 streaming capabilities, but may also be called directly by end user applications. The function receives a BIO from the caller, prepends a new BIO_f_asn1 filter BIO onto the front of it to form a BIO chain, and then returns the new head of the BIO chain to the caller. Under certain conditions, for example if a CMS recipient public key is invalid, the new filter BIO is freed and the function returns a NULL result indicating a failure. However, in this case, the BIO chain is not properly cleaned up and the BIO passed by the caller still retains internal pointers to the previously freed filter BIO. If the caller then goes on to call BIO_pop() on the BIO then a use-after-free will occur. This will most likely result in a crash. This scenario occurs directly in the internal function B64_write_ASN1() which may cause BIO_new_NDEF() to be called and will subsequently call BIO_pop() on the BIO. This internal function is in turn called by the public API functions PEM_write_bio_ASN1_stream, PEM_write_bio_CMS_stream, PEM_write_bio_PKCS7_stream, SMIME_write_ASN1, SMIME_write_CMS and SMIME_write_PKCS7. Other public API functions that may be impacted by this include i2d_ASN1_bio_stream, BIO_new_CMS, BIO_new_PKCS7, i2d_CMS_bio_stream and i2d_PKCS7_bio_stream. The OpenSSL cms and smime command line applications are similarly affected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-0215"
    },
    {
      "cve": "CVE-2023-0286",
      "cwe": {
        "id": "CWE-843",
        "name": "Access of Resource Using Incompatible Type (\u0027Type Confusion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a type confusion vulnerability relating to X.400 address processing inside an X.509 GeneralName. X.400 addresses were parsed as an ASN1_STRING but the public structure definition for GENERAL_NAME incorrectly specified the type of the x400Address field as ASN1_TYPE. This field is subsequently interpreted by the OpenSSL function GENERAL_NAME_cmp as an ASN1_TYPE rather than an ASN1_STRING. When CRL checking is enabled (i.e. the application sets the X509_V_FLAG_CRL_CHECK flag), this vulnerability may allow an attacker to pass arbitrary pointers to a memcmp call, enabling them to read memory contents or enact a denial of service. In most cases, the attack requires the attacker to provide both the certificate chain and CRL, neither of which need to have a valid signature. If the attacker only controls one of these inputs, the other input must already contain an X.400 address as a CRL distribution point, which is uncommon. As such, this vulnerability is most likely to only affect applications which have implemented their own functionality for retrieving CRLs over a network.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Disable CRL (certification revocation list) checking, if possible",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-0286"
    },
    {
      "cve": "CVE-2023-0361",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A timing side-channel in the handling of RSA ClientKeyExchange messages was discovered in GnuTLS. This side-channel can be sufficient to recover the key encrypted in the RSA ciphertext across a network in a Bleichenbacher style attack. To achieve a successful decryption the attacker would need to send a large amount of specially crafted messages to the vulnerable server. By recovering the secret from the ClientKeyExchange message, the attacker would be able to decrypt the application data exchanged over that connection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-0361"
    },
    {
      "cve": "CVE-2023-0464",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A security vulnerability has been identified in all supported versions of OpenSSL related to the verification of X.509 certificate chains that include policy constraints. Attackers may be able to exploit this vulnerability by creating a malicious certificate chain that triggers exponential use of computational resources, leading to a denial-of-service (DoS) attack on affected systems.\r\n\r\nPolicy processing is disabled by default but can be enabled by passing the `-policy` argument to the command line utilities or by calling the `X509_VERIFY_PARAM_set1_policies()` function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-0464"
    },
    {
      "cve": "CVE-2023-0465",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Applications that use a non-default option when verifying certificates may be\r\nvulnerable to an attack from a malicious CA to circumvent certain checks.\r\n\r\nInvalid certificate policies in leaf certificates are silently ignored by\r\nOpenSSL and other certificate policy checks are skipped for that certificate.\r\nA malicious CA could use this to deliberately assert invalid certificate policies\r\nin order to circumvent policy checking on the certificate altogether.\r\n\r\nPolicy processing is disabled by default but can be enabled by passing\r\nthe `-policy` argument to the command line utilities or by calling the\r\n`X509_VERIFY_PARAM_set1_policies()` function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-0465"
    },
    {
      "cve": "CVE-2023-0466",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The function X509_VERIFY_PARAM_add0_policy() is documented to\r\nimplicitly enable the certificate policy check when doing certificate\r\nverification. However the implementation of the function does not\r\nenable the check which allows certificates with invalid or incorrect\r\npolicies to pass the certificate verification.\r\n\r\nAs suddenly enabling the policy check could break existing deployments it was\r\ndecided to keep the existing behavior of the X509_VERIFY_PARAM_add0_policy()\r\nfunction.\r\n\r\nInstead the applications that require OpenSSL to perform certificate\r\npolicy check need to use X509_VERIFY_PARAM_set1_policies() or explicitly\r\nenable the policy check by calling X509_VERIFY_PARAM_set_flags() with\r\nthe X509_V_FLAG_POLICY_CHECK flag argument.\r\n\r\nCertificate policy checks are disabled by default in OpenSSL and are not\r\ncommonly used by applications.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-0466"
    },
    {
      "cve": "CVE-2023-0687",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in GNU C Library 2.38. It has been declared as critical. This vulnerability affects the function __monstartup of the file gmon.c of the component Call Graph Monitor. The manipulation leads to buffer overflow. It is recommended to apply a patch to fix this issue. VDB-220246 is the identifier assigned to this vulnerability. NOTE: The real existence of this vulnerability is still doubted at the moment. The inputs that induce this vulnerability are basically addresses of the running application that is built with gmon enabled. It\u0027s basically trusted input or input that needs an actual security flaw to be compromised or controlled.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.6,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:A/AC:H/PR:L/UI:N/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-0687"
    },
    {
      "cve": "CVE-2023-1077",
      "cwe": {
        "id": "CWE-843",
        "name": "Access of Resource Using Incompatible Type (\u0027Type Confusion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, pick_next_rt_entity() may return a type confused entry, not detected by the BUG_ON condition, as the confused entry will not be NULL, but list_head.The buggy error condition would lead to a type confused entry with the list head,which would then be used as a type confused sched_rt_entity,causing memory corruption.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-1077"
    },
    {
      "cve": "CVE-2023-1206",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A hash collision flaw was found in the IPv6 connection lookup table in the Linux kernel\u2019s IPv6 functionality when a user makes a new kind of SYN flood attack. A user located in the local network or with a high bandwidth connection can increase the CPU usage of the server that accepts IPV6 connections up to 95%.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-1206"
    },
    {
      "cve": "CVE-2023-2650",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Processing some specially crafted ASN.1 object identifiers or data containing them may be very slow. Impact summary: Applications that use OBJ_obj2txt() directly, or use any of the OpenSSL subsystems OCSP, PKCS7/SMIME, CMS, CMP/CRMF or TS with no message size limit may experience notable to very long delays when processing those messages, which may lead to a Denial of Service. An OBJECT IDENTIFIER is composed of a series of numbers - sub-identifiers - most of which have no size limit. OBJ_obj2txt() may be used to translate an ASN.1 OBJECT IDENTIFIER given in DER encoding form (using the OpenSSL type ASN1_OBJECT) to its canonical numeric text form, which are the sub-identifiers of the OBJECT IDENTIFIER in decimal form, separated by periods. When one of the sub-identifiers in the OBJECT IDENTIFIER is very large (these are sizes that are seen as absurdly large, taking up tens or hundreds of KiBs), the translation to a decimal number in text may take a very long time. The time complexity is O(square(n)) with \u0027n\u0027 being the size of the sub-identifiers in bytes (*). With OpenSSL 3.0, support to fetch cryptographic algorithms using names / identifiers in string form was introduced. This includes using OBJECT IDENTIFIERs in canonical numeric text form as identifiers for fetching algorithms. Such OBJECT IDENTIFIERs may be received through the ASN.1 structure AlgorithmIdentifier, which is commonly used in multiple protocols to specify what cryptographic algorithm should be used to sign or verify, encrypt or decrypt, or digest passed data. Applications that call OBJ_obj2txt() directly with untrusted data are affected, with any version of OpenSSL. If the use is for the mere purpose of display, the severity is considered low. In OpenSSL 3.0 and newer, this affects the subsystems OCSP, PKCS7/SMIME, CMS, CMP/CRMF or TS. It also impacts anything that processes X.509 certificates, including simple things like verifying its signature. The impact on TLS is relatively low, because all versions of OpenSSL have a 100KiB limit on the peer\u0027s certificate chain. Additionally, this only impacts clients, or servers that have explicitly enabled client authentication. In OpenSSL 1.1.1 and 1.0.2, this only affects displaying diverse objects, such as X.509 certificates. This is assumed to not happen in such a way that it would cause a Denial of Service, so these versions are considered not affected by this issue in such a way that it would be cause for concern, and the severity is therefore considered low.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-2650"
    },
    {
      "cve": "CVE-2023-2953",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in openldap. This security flaw causes a null pointer dereference in ber_memalloc_x() function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-2953"
    },
    {
      "cve": "CVE-2023-3212",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer dereference issue was found in the gfs2 file system in the Linux kernel. It occurs on corrupt gfs2 file systems when the evict code tries to reference the journal descriptor structure after it has been freed and set to NULL. A privileged local user could use this flaw to cause a kernel panic.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-3212"
    },
    {
      "cve": "CVE-2023-3446",
      "cwe": {
        "id": "CWE-606",
        "name": "Unchecked Input for Loop Condition"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. One of those checks confirms that the modulus (\u0027p\u0027 parameter) is not too large. Trying to use a very large modulus is slow and OpenSSL will not normally use a modulus which is over 10,000 bits in length. However the DH_check() function checks numerous aspects of the key or parameters that have been supplied. Some of those checks use the supplied modulus value even if it has already been found to be too large. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulernable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the \u0027-check\u0027 option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-3446"
    },
    {
      "cve": "CVE-2023-3609",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s net/sched: cls_u32 component can be exploited to achieve local privilege escalation.\r\n\r\nIf tcf_change_indev() fails, u32_set_parms() will immediately return an error after incrementing or decrementing the reference counter in tcf_bind_filter(). If an attacker can control the reference counter and set it to zero, they can cause the reference to be freed, leading to a use-after-free vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-3609"
    },
    {
      "cve": "CVE-2023-3611",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds write vulnerability in the Linux kernel\u0027s net/sched: sch_qfq component can be exploited to achieve local privilege escalation.\r\n\r\nThe qfq_change_agg() function in net/sched/sch_qfq.c allows an out-of-bounds write because lmax is updated according to packet sizes without bounds checks.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-3611"
    },
    {
      "cve": "CVE-2023-3772",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel\u0027s IP framework for transforming packets (XFRM subsystem). This issue may allow a malicious user with CAP_NET_ADMIN privileges to directly dereference a NULL pointer in xfrm_update_ae_params(), leading to a possible kernel crash and denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-3772"
    },
    {
      "cve": "CVE-2023-3817",
      "cwe": {
        "id": "CWE-834",
        "name": "Excessive Iteration"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. After fixing CVE-2023-3446 it was discovered that a large q parameter value can also trigger an overly long computation during some of these checks. A correct q value, if present, cannot be larger than the modulus p parameter, thus it is unnecessary to perform these checks if q is larger than p. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the \"-check\" option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-3817"
    },
    {
      "cve": "CVE-2023-4016",
      "cwe": {
        "id": "CWE-122",
        "name": "Heap-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Under some circumstances, this weakness allows a user who has access to run the \u201cps\u201d utility on a machine, the ability to write almost unlimited amounts of unfiltered data into the process heap.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 2.5,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-4016"
    },
    {
      "cve": "CVE-2023-4039",
      "cwe": {
        "id": "CWE-693",
        "name": "Protection Mechanism Failure"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A failure in the -fstack-protector feature in GCC-based toolchains \nthat target AArch64 allows an attacker to exploit an existing buffer \noverflow in dynamically-sized local variables in your application \nwithout this being detected. This stack-protector failure only applies \nto C99-style dynamically-sized local variables or those created using \nalloca(). The stack-protector operates as intended for statically-sized \nlocal variables.\n\nThe default behavior when the stack-protector \ndetects an overflow is to terminate your application, resulting in \ncontrolled loss of availability. An attacker who can exploit a buffer \noverflow without triggering the stack-protector might be able to change \nprogram flow control to cause an uncontrolled loss of availability or to\n go further and affect confidentiality or integrity.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.8,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-4039"
    },
    {
      "cve": "CVE-2023-4527",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in glibc. When the getaddrinfo function is called with the AF_UNSPEC address family and the system is configured with no-aaaa mode via /etc/resolv.conf, a DNS response via TCP larger than 2048 bytes can potentially disclose stack contents through the function returned address data, and may cause a crash.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-4527"
    },
    {
      "cve": "CVE-2023-4623",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s net/sched: sch_hfsc (HFSC qdisc traffic control) component can be exploited to achieve local privilege escalation.\n\nIf a class with a link-sharing curve (i.e. with the HFSC_FSC flag set) has a parent without a link-sharing curve, then init_vf() will call vttree_insert() on the parent, but vttree_remove() will be skipped in update_vf(). This leaves a dangling pointer that can cause a use-after-free.\n\nWe recommend upgrading past commit b3d26c5702c7d6c45456326e56d2ccf3f103e60f.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-4623"
    },
    {
      "cve": "CVE-2023-4806",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in glibc. In an extremely rare situation, the getaddrinfo function may access memory that has been freed, resulting in an application crash. This issue is only exploitable when a NSS module implements only the _nss_*_gethostbyname2_r and _nss_*_getcanonname_r hooks without implementing the _nss_*_gethostbyname3_r hook. The resolved name should return a large number of IPv6 and IPv4, and the call to the getaddrinfo function should have the AF_INET6 address family with AI_CANONNAME, AI_ALL and AI_V4MAPPED as flags.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-4806"
    },
    {
      "cve": "CVE-2023-4807",
      "cwe": {
        "id": "CWE-440",
        "name": "Expected Behavior Violation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: The POLY1305 MAC (message authentication code) implementation contains a bug that might corrupt the internal state of applications on the Windows 64 platform when running on newer X86_64 processors supporting the AVX512-IFMA instructions. Impact summary: If in an application that uses the OpenSSL library an attacker can influence whether the POLY1305 MAC algorithm is used, the application state might be corrupted with various application dependent consequences. The POLY1305 MAC (message authentication code) implementation in OpenSSL does not save the contents of non-volatile XMM registers on Windows 64 platform when calculating the MAC of data larger than 64 bytes. Before returning to the caller all the XMM registers are set to zero rather than restoring their previous content. The vulnerable code is used only on newer x86_64 processors supporting the AVX512-IFMA instructions. The consequences of this kind of internal application state corruption can be various - from no consequences, if the calling application does not depend on the contents of non-volatile XMM registers at all, to the worst consequences, where the attacker could get complete control of the application process. However given the contents of the registers are just zeroized so the attacker cannot put arbitrary values inside, the most likely consequence, if any, would be an incorrect result of some application dependent calculations or a crash leading to a denial of service. The POLY1305 MAC algorithm is most frequently used as part of the CHACHA20-POLY1305 AEAD (authenticated encryption with associated data) algorithm. The most common usage of this AEAD cipher is with TLS protocol versions 1.2 and 1.3 and a malicious client can influence whether this AEAD cipher is used by the server. This implies that server applications using OpenSSL can be potentially impacted. However we are currently not aware of any concrete application that would be affected by this issue therefore we consider this a Low severity security issue. As a workaround the AVX512-IFMA instructions support can be disabled at runtime by setting the environment variable OPENSSL_ia32cap: OPENSSL_ia32cap=:~0x200000 The FIPS provider is not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-4807"
    },
    {
      "cve": "CVE-2023-4813",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in glibc. In an uncommon situation, the gaih_inet function may use memory that has been freed, resulting in an application crash. This issue is only exploitable when the getaddrinfo function is called and the hosts database in /etc/nsswitch.conf is configured with SUCCESS=continue or SUCCESS=merge.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-4813"
    },
    {
      "cve": "CVE-2023-4911",
      "cwe": {
        "id": "CWE-121",
        "name": "Stack-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A buffer overflow was discovered in the GNU C Library\u0027s dynamic loader ld.so while processing the GLIBC_TUNABLES environment variable. This issue could allow a local attacker to use maliciously crafted GLIBC_TUNABLES environment variables when launching binaries with SUID permission to execute code with elevated privileges.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-4911"
    },
    {
      "cve": "CVE-2023-4921",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s net/sched: sch_qfq component can be exploited to achieve local privilege escalation.\n\nWhen the plug qdisc is used as a class of the qfq qdisc, sending network packets triggers use-after-free in qfq_dequeue() due to the incorrect .peek handler of sch_plug and lack of error checking in agg_dequeue().\n\nWe recommend upgrading past commit 8fc134fee27f2263988ae38920bc03da416b03d8.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-4921"
    },
    {
      "cve": "CVE-2023-5156",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the GNU C Library. A recent fix for CVE-2023-4806 introduced the potential for a memory leak, which may result in an application crash.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-5156"
    },
    {
      "cve": "CVE-2023-5678",
      "cwe": {
        "id": "CWE-606",
        "name": "Unchecked Input for Loop Condition"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Generating excessively long X9.42 DH keys or checking excessively long X9.42 DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_generate_key() to generate an X9.42 DH key may experience long delays. Likewise, applications that use DH_check_pub_key(), DH_check_pub_key_ex() or EVP_PKEY_public_check() to check an X9.42 DH key or X9.42 DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. While DH_check() performs all the necessary checks (as of CVE-2023-3817), DH_check_pub_key() doesn\u0027t make any of these checks, and is therefore vulnerable for excessively large P and Q parameters. Likewise, while DH_generate_key() performs a check for an excessively large P, it doesn\u0027t check for an excessively large Q. An application that calls DH_generate_key() or DH_check_pub_key() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. DH_generate_key() and DH_check_pub_key() are also called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_pub_key_ex(), EVP_PKEY_public_check(), and EVP_PKEY_generate(). Also vulnerable are the OpenSSL pkey command line application when using the \"-pubcheck\" option, as well as the OpenSSL genpkey command line application. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-5678"
    },
    {
      "cve": "CVE-2023-5717",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A heap out-of-bounds write vulnerability in the Linux kernel\u0027s Linux Kernel Performance Events (perf) component can be exploited to achieve local privilege escalation.\r\n\r\nIf perf_read_group() is called while an event\u0027s sibling_list is smaller than its child\u0027s sibling_list, it can increment or write to memory locations outside of the allocated buffer.\r\n\r\nWe recommend upgrading past commit 32671e3799ca2e4590773fd0e63aaa4229e50c06.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-5717"
    },
    {
      "cve": "CVE-2023-5981",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found that the response times to malformed ciphertexts in RSA-PSK ClientKeyExchange differ from response times of ciphertexts with correct PKCS#1 v1.5 padding.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-5981"
    },
    {
      "cve": "CVE-2023-6121",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds read vulnerability was found in the NVMe-oF/TCP subsystem in the Linux kernel. This issue may allow a remote attacker to send a crafted TCP packet, triggering a heap-based buffer overflow that results in kmalloc data being printed and potentially leaked to the kernel ring buffer (dmesg).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-6121"
    },
    {
      "cve": "CVE-2023-6817",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s netfilter: nf_tables component can be exploited to achieve local privilege escalation.\n\nThe function nft_pipapo_walk did not skip inactive elements during set walk which could lead double deactivations of PIPAPO (Pile Packet Policies) elements, leading to use-after-free.\n\nWe recommend upgrading past commit 317eb9685095678f2c9f5a8189de698c5354316a.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-6817"
    },
    {
      "cve": "CVE-2023-6931",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A heap out-of-bounds write vulnerability in the Linux kernel\u0027s Performance Events system component can be exploited to achieve local privilege escalation.\n\nA perf_event\u0027s read_size can overflow, leading to an heap out-of-bounds increment or write in perf_read_group().\n\nWe recommend upgrading past commit 382c27f4ed28f803b1f1473ac2d8db0afc795a1b.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-6931"
    },
    {
      "cve": "CVE-2023-6932",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s ipv4: igmp component can be exploited to achieve local privilege escalation.\n\nA race condition can be exploited to cause a timer be mistakenly registered on a RCU read locked object which is freed by another thread.\n\nWe recommend upgrading past commit e2b706c691905fe78468c361aaabc719d0a496f1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-6932"
    },
    {
      "cve": "CVE-2023-23914",
      "cwe": {
        "id": "CWE-319",
        "name": "Cleartext Transmission of Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A cleartext transmission of sensitive information vulnerability exists in curl \u003cv7.88.0 that could cause HSTS functionality fail when multiple URLs are requested serially. Using its HSTS support, curl can be instructed to use HTTPS instead of usingan insecure clear-text HTTP step even when HTTP is provided in the URL. ThisHSTS mechanism would however surprisingly be ignored by subsequent transferswhen done on the same command line because the state would not be properlycarried on.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-23914"
    },
    {
      "cve": "CVE-2023-23915",
      "cwe": {
        "id": "CWE-319",
        "name": "Cleartext Transmission of Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A cleartext transmission of sensitive information vulnerability exists in curl \u003cv7.88.0 that could cause HSTS functionality to behave incorrectly when multiple URLs are requested in parallel. Using its HSTS support, curl can be instructed to use HTTPS instead of using an insecure clear-text HTTP step even when HTTP is provided in the URL. This HSTS mechanism would however surprisingly fail when multiple transfers are done in parallel as the HSTS cache file gets overwritten by the most recentlycompleted transfer. A later HTTP-only transfer to the earlier host name would then *not* get upgraded properly to HSTS.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-23915"
    },
    {
      "cve": "CVE-2023-23916",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An allocation of resources without limits or throttling vulnerability exists in curl \u003cv7.88.0 based on the \"chained\" HTTP compression algorithms, meaning that a server response can be compressed multiple times and potentially with differentalgorithms. The number of acceptable \"links\" in this \"decompression chain\" wascapped, but the cap was implemented on a per-header basis allowing a maliciousserver to insert a virtually unlimited number of compression steps simply byusing many headers. The use of such a decompression chain could result in a \"malloc bomb\", making curl end up spending enormous amounts of allocated heap memory, or trying to and returning out of memory errors.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-23916"
    },
    {
      "cve": "CVE-2023-24329",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue in the urllib.parse component of Python before 3.11.4 allows attackers to bypass blocklisting methods by supplying a URL that starts with blank characters.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-24329"
    },
    {
      "cve": "CVE-2023-25136",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "OpenSSH server (sshd) 9.1 introduced a double-free vulnerability during options.kex_algorithms handling. This is fixed in OpenSSH 9.2. The double free can be leveraged, by an unauthenticated remote attacker in the default configuration, to jump to any location in the sshd address space. One third-party report states \"remote code execution is theoretically possible.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-25136"
    },
    {
      "cve": "CVE-2023-25139",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "sprintf in the GNU C Library (glibc) 2.37 has a buffer overflow (out-of-bounds write) in some situations with a correct buffer size. This is unrelated to CWE-676. It may write beyond the bounds of the destination buffer when attempting to write a padded, thousands-separated string representation of a number, if the buffer is allocated the exact size required to represent that number as a string. For example, 1,234,567 (with padding to 13) overflows by two bytes.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-25139"
    },
    {
      "cve": "CVE-2023-26604",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "systemd before 247 does not adequately block local privilege escalation for some Sudo configurations, e.g., plausible sudoers files in which the \"systemctl status\" command may be executed. Specifically, systemd does not set LESSSECURE to 1, and thus other programs may be launched from the less program. This presents a substantial security risk when running systemctl from Sudo, because less executes as root when the terminal size is too small to show the complete systemctl output.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-26604"
    },
    {
      "cve": "CVE-2023-27371",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU libmicrohttpd before 0.9.76 allows remote DoS (Denial of Service) due to improper parsing of a multipart/form-data boundary in the postprocessor.c MHD_create_post_processor() method. This allows an attacker to remotely send a malicious HTTP POST packet that includes one or more \u0027\\0\u0027 bytes in a multipart/form-data boundary field, which - assuming a specific heap layout - will result in an out-of-bounds read and a crash in the find_boundary() function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AC:H/AV:N/A:H/C:N/I:N/PR:N/S:U/UI:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-27371"
    },
    {
      "cve": "CVE-2023-27533",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability in input validation exists in curl \u003c8.0 during communication using the TELNET protocol may allow an attacker to pass on maliciously crafted user name and \"telnet options\" during server negotiation. The lack of proper input scrubbing allows an attacker to send content or perform option negotiation without the application\u0027s intent. This vulnerability could be exploited if an application allows user input, thereby enabling attackers to execute arbitrary code on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-27533"
    },
    {
      "cve": "CVE-2023-27534",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A path traversal vulnerability exists in curl \u003c8.0.0 SFTP implementation causes the tilde (~) character to be wrongly replaced when used as a prefix in the first path element, in addition to its intended use as the first element to indicate a path relative to the user\u0027s home directory. Attackers can exploit this flaw to bypass filtering or execute arbitrary code by crafting a path like /~2/foo while accessing a server with a specific user.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-27534"
    },
    {
      "cve": "CVE-2023-27535",
      "cwe": {
        "id": "CWE-287",
        "name": "Improper Authentication"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An authentication bypass vulnerability exists in libcurl \u003c8.0.0 in the FTP connection reuse feature that can result in wrong credentials being used during subsequent transfers. Previously created connections are kept in a connection pool for reuse if they match the current setup. However, certain FTP settings such as CURLOPT_FTP_ACCOUNT, CURLOPT_FTP_ALTERNATIVE_TO_USER, CURLOPT_FTP_SSL_CCC, and CURLOPT_USE_SSL were not included in the configuration match checks, causing them to match too easily. This could lead to libcurl using the wrong credentials when performing a transfer, potentially allowing unauthorized access to sensitive information.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-27535"
    },
    {
      "cve": "CVE-2023-27536",
      "cwe": {
        "id": "CWE-287",
        "name": "Improper Authentication"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An authentication bypass vulnerability exists libcurl \u003c8.0.0 in the connection reuse feature which can reuse previously established connections with incorrect user permissions due to a failure to check for changes in the CURLOPT_GSSAPI_DELEGATION option. This vulnerability affects krb5/kerberos/negotiate/GSSAPI transfers and could potentially result in unauthorized access to sensitive information. The safest option is to not reuse connections if the CURLOPT_GSSAPI_DELEGATION option has been changed.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-27536"
    },
    {
      "cve": "CVE-2023-27537",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A double free vulnerability exists in libcurl \u003c8.0.0 when sharing HSTS data between separate \"handles\". This sharing was introduced without considerations for do this sharing across separate threads but there was no indication of this fact in the documentation. Due to missing mutexes or thread locks, two threads sharing the same HSTS data could end up doing a double-free or use-after-free.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-27537"
    },
    {
      "cve": "CVE-2023-27538",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl would reuse a previously created connection even when an SSH related option had been changed that should have prohibited reuse. libcurl keeps previously used connections in a connection pool for subsequent transfers to reuse if one of them matches the setup. However, two SSH settings were left out from the configuration match checks, making them match too easily.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-27538"
    },
    {
      "cve": "CVE-2023-28484",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libxml2 before 2.10.4, parsing of certain invalid XSD schemas can lead to a NULL pointer dereference and subsequently a segfault. This occurs in xmlSchemaFixupComplexType in xmlschemas.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-28484"
    },
    {
      "cve": "CVE-2023-28531",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ssh-add in OpenSSH before 9.3 adds smartcard keys to ssh-agent without the intended per-hop destination constraints. The earliest affected version is 8.9.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-28531"
    },
    {
      "cve": "CVE-2023-29383",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Shadow 4.13, it is possible to inject control characters into fields provided to the SUID program chfn (change finger). Although it is not possible to exploit this directly (e.g., adding a new user fails because \\n is in the block list), it is possible to misrepresent the /etc/passwd file when viewed. Use of \\r manipulations and Unicode characters to work around blocking of the : character make it possible to give the impression that a new user has been added. In other words, an adversary may be able to convince a system administrator to take the system offline (an indirect, social-engineered denial of service) by demonstrating that \"cat /etc/passwd\" shows a rogue user account.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-29383"
    },
    {
      "cve": "CVE-2023-29469",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.10.4. When hashing empty dict strings in a crafted XML document, xmlDictComputeFastKey in dict.c can produce non-deterministic values, leading to various logic and memory errors, such as a double free. This behavior occurs because there is an attempt to use the first byte of an empty string, and any value is possible (not solely the \u0027\\0\u0027 value).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-29469"
    },
    {
      "cve": "CVE-2023-29491",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ncurses before 6.4 20230408, when used by a setuid application, allows local users to trigger security-relevant memory corruption via malformed data in a terminfo database file that is found in $HOME/.terminfo or reached via the TERMINFO or TERM environment variable.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-29491"
    },
    {
      "cve": "CVE-2023-29499",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in GLib. GVariant deserialization fails to validate that the input conforms to the expected format, leading to denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-29499"
    },
    {
      "cve": "CVE-2023-31085",
      "cwe": {
        "id": "CWE-369",
        "name": "Divide By Zero"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in drivers/mtd/ubi/cdev.c in the Linux kernel 6.2. There is a divide-by-zero error in do_div(sz,mtd-\u003eerasesize), used indirectly by ctrl_cdev_ioctl, when mtd-\u003eerasesize is 0.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-31085"
    },
    {
      "cve": "CVE-2023-32611",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in GLib. GVariant deserialization is vulnerable to a slowdown issue where a crafted GVariant can cause excessive processing, leading to denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-32611"
    },
    {
      "cve": "CVE-2023-32636",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in glib, where the gvariant deserialization code is vulnerable to a denial of service introduced by additional input validation added to resolve CVE-2023-29499. The offset table validation may be very slow. This bug does not affect any released version of glib but does affect glib distributors who followed the guidance of glib developers to backport the initial fix for CVE-2023-29499.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-32636"
    },
    {
      "cve": "CVE-2023-32643",
      "cwe": {
        "id": "CWE-122",
        "name": "Heap-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in GLib. The GVariant deserialization code is vulnerable to a heap buffer overflow introduced by the fix for CVE-2023-32665. This bug does not affect any released version of GLib, but does affect GLib distributors who followed the guidance of GLib developers to backport the initial fix for CVE-2023-32665.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-32643"
    },
    {
      "cve": "CVE-2023-32665",
      "cwe": {
        "id": "CWE-502",
        "name": "Deserialization of Untrusted Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in GLib. GVariant deserialization is vulnerable to an exponential blowup issue where a crafted GVariant can cause excessive processing, leading to denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-32665"
    },
    {
      "cve": "CVE-2023-34319",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The fix for XSA-423 added logic to Linux\u0027es netback driver to deal with\na frontend splitting a packet in a way such that not all of the headers\nwould come in one piece.  Unfortunately the logic introduced there\ndidn\u0027t account for the extreme case of the entire packet being split\ninto as many pieces as permitted by the protocol, yet still being\nsmaller than the area that\u0027s specially dealt with to keep all (possible)\nheaders together.  Such an unusual packet would therefore trigger a\nbuffer overrun in the driver.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-34319"
    },
    {
      "cve": "CVE-2023-34969",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "D-Bus before 1.15.6 sometimes allows unprivileged users to crash dbus-daemon. If a privileged user with control over the dbus-daemon is using the org.freedesktop.DBus.Monitoring interface to monitor message bus traffic, then an unprivileged user with the ability to connect to the same dbus-daemon can cause a dbus-daemon crash under some circumstances via an unreplyable message. When done on the well-known system bus, this is a denial-of-service vulnerability. The fixed versions are 1.12.28, 1.14.8, and 1.15.6.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-34969"
    },
    {
      "cve": "CVE-2023-35001",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Linux Kernel nftables Out-Of-Bounds Read/Write Vulnerability; nft_byteorder poorly handled vm register contents when CAP_NET_ADMIN is in any user or network namespace",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-35001"
    },
    {
      "cve": "CVE-2023-35945",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Envoy is a cloud-native high-performance edge/middle/service proxy. Envoy\u2019s HTTP/2 codec may leak a header map and bookkeeping structures upon receiving `RST_STREAM` immediately followed by the `GOAWAY` frames from an upstream server. In nghttp2, cleanup of pending requests due to receipt of the `GOAWAY` frame skips de-allocation of the bookkeeping structure and pending compressed header. The error return [code path] is taken if connection is already marked for not sending more requests due to `GOAWAY` frame. The clean-up code is right after the return statement, causing memory leak. Denial of service through memory exhaustion. This vulnerability was patched in versions(s) 1.26.3, 1.25.8, 1.24.9, 1.23.11.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-35945"
    },
    {
      "cve": "CVE-2023-38408",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The PKCS#11 feature in ssh-agent in OpenSSH before 9.3p2 has an insufficiently trustworthy search path, leading to remote code execution if an agent is forwarded to an attacker-controlled system. (Code in /usr/lib is not necessarily safe for loading into ssh-agent.) NOTE: this issue exists because of an incomplete fix for CVE-2016-10009.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.7,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:R/S:C/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-38408"
    },
    {
      "cve": "CVE-2023-38545",
      "cwe": {
        "id": "CWE-122",
        "name": "Heap-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "This flaw makes curl overflow a heap based buffer in the SOCKS5 proxy handshake.\r\n\r\nWhen curl is asked to pass along the hostname to the SOCKS5 proxy to allow that to resolve the address instead of it getting done by curl itself, the maximum length that hostname can be is 255 bytes.\r\n\r\nIf the hostname is detected to be longer than 255 bytes, curl switches to local name resolving and instead passes on the resolved address only to the proxy. Due to a bug, the local variable that means \"let the host resolve the name\" could get the wrong value during a slow SOCKS5 handshake, and contrary to the intention, copy the too long hostname to the target buffer instead of copying just the resolved address there.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-38545"
    },
    {
      "cve": "CVE-2023-38546",
      "cwe": {
        "id": "CWE-73",
        "name": "External Control of File Name or Path"
      },
      "notes": [
        {
          "category": "summary",
          "text": "This flaw allows an attacker to insert cookies at will into a running program\r\nusing libcurl, if the specific series of conditions are met.\r\n\r\nlibcurl performs transfers. In its API, an application creates \"easy handles\"\r\nthat are the individual handles for single transfers.\r\n\r\nlibcurl provides a function call that duplicates en easy handle called\r\n[curl_easy_duphandle](https://curl.se/libcurl/c/curl_easy_duphandle.html).\r\n\r\nIf a transfer has cookies enabled when the handle is duplicated, the\r\ncookie-enable state is also cloned - but without cloning the actual\r\ncookies. If the source handle did not read any cookies from a specific file on\r\ndisk, the cloned version of the handle would instead store the file name as\r\n`none` (using the four ASCII letters, no quotes).\r\n\r\nSubsequent use of the cloned handle that does not explicitly set a source to\r\nload cookies from would then inadvertently load cookies from a file named\r\n`none` - if such a file exists and is readable in the current directory of the\r\nprogram using libcurl. And if using the correct file format of course.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-38546"
    },
    {
      "cve": "CVE-2023-39128",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU gdb (GDB) 13.0.50.20220805-git was discovered to contain a stack overflow via the function ada_decode at /gdb/ada-lang.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-39128"
    },
    {
      "cve": "CVE-2023-39189",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Netfilter subsystem in the Linux kernel. The nfnl_osf_add_callback function did not validate the user mode controlled opt_num field. This flaw allows a local privileged (CAP_NET_ADMIN) attacker to trigger an out-of-bounds read, leading to a crash or information disclosure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-39189"
    },
    {
      "cve": "CVE-2023-39192",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Netfilter subsystem in the Linux kernel. The xt_u32 module did not validate the fields in the xt_u32 structure. This flaw allows a local privileged attacker to trigger an out-of-bounds read by setting the size fields with a value beyond the array boundaries, leading to a crash or information disclosure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:C/C:H/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-39192"
    },
    {
      "cve": "CVE-2023-39193",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Netfilter subsystem in the Linux kernel. The sctp_mt_check did not validate the flag_count field. This flaw allows a local privileged (CAP_NET_ADMIN) attacker to trigger an out-of-bounds read, leading to a crash or information disclosure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-39193"
    },
    {
      "cve": "CVE-2023-39194",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the XFRM subsystem in the Linux kernel. The specific flaw exists within the processing of state filters, which can result in a read past the end of an allocated buffer. This flaw allows a local privileged (CAP_NET_ADMIN) attacker to trigger an out-of-bounds read, potentially leading to an information disclosure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.2,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:C/C:L/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-39194"
    },
    {
      "cve": "CVE-2023-39615",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Xmlsoft Libxml2 v2.11.0 was discovered to contain an out-of-bounds read via the xmlSAX2StartElement() function at /libxml2/SAX2.c. This vulnerability allows attackers to cause a Denial of Service (DoS) via supplying a crafted XML file. NOTE: the vendor\u0027s position is that the product does not support the legacy SAX1 interface with custom callbacks; there is a crash even without crafted input.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-39615"
    },
    {
      "cve": "CVE-2023-40283",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in l2cap_sock_release in net/bluetooth/l2cap_sock.c in the Linux kernel before 6.4.10. There is a use-after-free because the children of an sk are mishandled.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-40283"
    },
    {
      "cve": "CVE-2023-42754",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer dereference flaw was found in the Linux kernel ipv4 stack. The socket buffer (skb) was assumed to be associated with a device before calling __ip_options_compile, which is not always the case if the skb is re-routed by ipvs. This issue may allow a local user with CAP_NET_ADMIN privileges to crash the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-42754"
    },
    {
      "cve": "CVE-2023-42755",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the IPv4 Resource Reservation Protocol (RSVP) classifier in the Linux kernel. The xprt pointer may go beyond the linear part of the skb, leading to an out-of-bounds read in the `rsvp_classify` function. This issue may allow a local user to crash the system and cause a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-42755"
    },
    {
      "cve": "CVE-2023-44487",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The HTTP/2 protocol allows a denial of service (server resource consumption) because request cancellation can reset many streams quickly, as exploited in the wild in August through October 2023.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-44487"
    },
    {
      "cve": "CVE-2023-45322",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libxml2 through 2.11.5 has a use-after-free that can only occur after a certain memory allocation fails. This occurs in xmlUnlinkNode in tree.c. NOTE: the vendor\u0027s position is \"I don\u0027t think these issues are critical enough to warrant a CVE ID ... because an attacker typically can\u0027t control when memory allocations fail.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-45322"
    },
    {
      "cve": "CVE-2023-45853",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "MiniZip in zlib through 1.3 has an integer overflow and resultant heap-based buffer overflow in zipOpenNewFileInZip4_64 via a long filename, comment, or extra field. NOTE: MiniZip is not a supported part of the zlib product.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-45853"
    },
    {
      "cve": "CVE-2023-45871",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in drivers/net/ethernet/intel/igb/igb_main.c in the IGB driver in the Linux kernel before 6.5.3. A buffer size may not be adequate for frames larger than the MTU.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-45871"
    },
    {
      "cve": "CVE-2023-45898",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The Linux kernel before 6.5.4 has an es1 use-after-free in fs/ext4/extents_status.c, related to ext4_es_insert_extent.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-45898"
    },
    {
      "cve": "CVE-2023-45918",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ncurses 6.4-20230610 has a NULL pointer dereference in tgetstr in tinfo/lib_termcap.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-45918"
    },
    {
      "cve": "CVE-2023-46218",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "This flaw allows a malicious HTTP server to set \"super cookies\" in curl that are then passed back to more origins than what is otherwise allowed or possible. This allows a site to set cookies that then would get sent to different and unrelated sites and domains. It could do this by exploiting a mixed case flaw in curl\u0027s function that verifies a given cookie domain against the Public Suffix List (PSL). For example a cookie could be set with `domain=co.UK` when the URL used a lower case hostname `curl.co.uk`, even though `co.uk` is listed as a PSL domain.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-46218"
    },
    {
      "cve": "CVE-2023-46219",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When saving HSTS data to an excessively long file name, curl could end up removing all contents, making subsequent requests using that file unaware of the HSTS status they should otherwise use.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-46219"
    },
    {
      "cve": "CVE-2023-46862",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel through 6.5.9. During a race with SQ thread exit, an io_uring/fdinfo.c io_uring_show_fdinfo NULL pointer dereference can occur.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-46862"
    },
    {
      "cve": "CVE-2023-48795",
      "cwe": {
        "id": "CWE-222",
        "name": "Truncation of Security-relevant Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The SSH transport protocol with certain OpenSSH extensions, found in OpenSSH before 9.6 and other products, allows remote attackers to bypass integrity checks such that some packets are omitted (from the extension negotiation message), and a client and server may consequently end up with a connection for which some security features have been downgraded or disabled, aka a Terrapin attack. This occurs because the SSH Binary Packet Protocol (BPP), implemented by these extensions, mishandles the handshake phase and mishandles use of sequence numbers. For example, there is an effective attack against SSH\u0027s use of ChaCha20-Poly1305 (and CBC with Encrypt-then-MAC). The bypass occurs in chacha20-poly1305@openssh.com and (if CBC is used) the -etm@openssh.com MAC algorithms. This also affects Maverick Synergy Java SSH API before 3.1.0-SNAPSHOT, Dropbear through 2022.83, Ssh before 5.1.1 in Erlang/OTP, PuTTY before 0.80, AsyncSSH before 2.14.2, golang.org/x/crypto before 0.17.0, libssh before 0.10.6, libssh2 through 1.11.0, Thorn Tech SFTP Gateway before 3.4.6, Tera Term before 5.1, Paramiko before 3.4.0, jsch before 0.2.15, SFTPGo before 2.5.6, Netgate pfSense Plus through 23.09.1, Netgate pfSense CE through 2.7.2, HPN-SSH through 18.2.0, ProFTPD before 1.3.8b (and before1.3.9rc2), ORYX CycloneSSH before 2.3.4, NetSarang XShell 7 before Build 0144, CrushFTP before 10.6.0, ConnectBot SSH library before 2.2.22, Apache MINA sshd through 2.11.0, sshj through 0.37.0, TinySSH through 20230101, trilead-ssh2 6401, the net-ssh gem 7.2.0 for Ruby, the mscdex ssh2 module before 1.15.0 for Node.js, the thrussh library before 0.35.1 for Rust, and the Russh crate before 0.40.2 for Rust; and there could be effects on Bitvise SSH through 9.31.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-48795"
    },
    {
      "cve": "CVE-2023-52425",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libexpat through 2.5.0 allows a denial of service (resource consumption) because many full reparsings are required in the case of a large token for which multiple buffer fills are needed.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-52425"
    },
    {
      "cve": "CVE-2023-52426",
      "cwe": {
        "id": "CWE-776",
        "name": "Improper Restriction of Recursive Entity References in DTDs (\u0027XML Entity Expansion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libexpat through 2.5.0 allows recursive XML Entity Expansion if XML_DTD is undefined at compile time.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-52426"
    },
    {
      "cve": "CVE-2023-52444",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid dirent corruption As Al reported in link[1]: f2fs_rename() ... if (old_dir != new_dir \u0026\u0026 !whiteout) f2fs_set_link(old_inode, old_dir_entry, old_dir_page, new_dir); else f2fs_put_page(old_dir_page, 0); You want correct inumber in the \"..\" link. And cross-directory rename does move the source to new parent, even if you\u0027d been asked to leave a whiteout in the old place. [1] https://lore.kernel.org/all/20231017055040.GN800259@ZenIV/ With below testcase, it may cause dirent corruption, due to it missed to call f2fs_set_link() to update \"..\" link to new directory. - mkdir -p dir/foo - renameat2 -w dir/foo bar [ASSERT] (__chk_dots_dentries:1421) --\u003e Bad inode number[0x4] for \u0027..\u0027, parent parent ino is [0x3] [FSCK] other corrupted bugs [Fail]",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-52444"
    },
    {
      "cve": "CVE-2023-52464",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: EDAC/thunderx: Fix possible out-of-bounds string access Enabling -Wstringop-overflow globally exposes a warning for a common bug in the usage of strncat(): drivers/edac/thunderx_edac.c: In function \u0027thunderx_ocx_com_threaded_isr\u0027: drivers/edac/thunderx_edac.c:1136:17: error: \u0027strncat\u0027 specified bound 1024 equals destination size [-Werror=stringop-overflow=] 1136 | strncat(msg, other, OCX_MESSAGE_SIZE); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ... 1145 | strncat(msg, other, OCX_MESSAGE_SIZE); ... 1150 | strncat(msg, other, OCX_MESSAGE_SIZE); ... Apparently the author of this driver expected strncat() to behave the way that strlcat() does, which uses the size of the destination buffer as its third argument rather than the length of the source buffer. The result is that there is no check on the size of the allocated buffer. Change it to strlcat(). [ bp: Trim compiler output, fixup commit message. ]",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-52464"
    },
    {
      "cve": "CVE-2023-52612",
      "cwe": {
        "id": "CWE-121",
        "name": "Stack-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: crypto: scomp - fix req-\u003edst buffer overflow The req-\u003edst buffer size should be checked before copying from the scomp_scratch-\u003edst to avoid req-\u003edst buffer overflow problem.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.0,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-52612"
    },
    {
      "cve": "CVE-2023-52622",
      "cwe": {
        "id": "CWE-131",
        "name": "Incorrect Calculation of Buffer Size"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: ext4: avoid online resizing failures due to oversized flex bg.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-52622"
    },
    {
      "cve": "CVE-2023-52675",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: powerpc/imc-pmu: Add a null pointer check in update_events_in_group() kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-52675"
    },
    {
      "cve": "CVE-2023-52699",
      "cwe": {
        "id": "CWE-833",
        "name": "Deadlock"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: sysv: don\u0027t call sb_bread() with pointers_lock held syzbot is reporting sleep in atomic context in SysV filesystem [1], for sb_bread() is called with rw_spinlock held. A \"write_lock(\u0026pointers_lock) =\u003e read_lock(\u0026pointers_lock) deadlock\" bug and a \"sb_bread() with write_lock(\u0026pointers_lock)\" bug were introduced by \"Replace BKL for chain locking with sysvfs-private rwlock\" in Linux 2.5.12. Then, \"[PATCH] err1-40: sysvfs locking fix\" in Linux 2.6.8 fixed the former bug by moving pointers_lock lock to the callers, but instead introduced a \"sb_bread() with read_lock(\u0026pointers_lock)\" bug (which made this problem easier to hit). Al Viro suggested that why not to do like get_branch()/get_block()/ find_shared() in Minix filesystem does. And doing like that is almost a revert of \"[PATCH] err1-40: sysvfs locking fix\" except that get_branch() from with find_shared() is called without write_lock(\u0026pointers_lock).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-52699"
    },
    {
      "cve": "CVE-2024-0584",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free issue was found in igmp_start_timer in net/ipv4/igmp.c in the network sub-component in the Linux Kernel. This flaw allows a local user to observe a refcnt use-after-free issue when receiving an igmp query packet, leading to a kernel information leak.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-0584"
    },
    {
      "cve": "CVE-2024-2004",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When a protocol selection parameter option disables all protocols without adding any then the default set of protocols would remain in the allowed set due to an error in the logic for removing protocols. The below command would perform a request to curl.se with a plaintext protocol which has been explicitly disabled.      curl --proto -all,-http http://curl.se  The flaw is only present if the set of selected protocols disables the entire set of available protocols, in itself a command with no practical use and therefore unlikely to be encountered in real situations. The curl security team has thus assessed this to be low severity bug.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-2004"
    },
    {
      "cve": "CVE-2024-2236",
      "cwe": {
        "id": "CWE-208",
        "name": "Observable Timing Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A timing-based side-channel flaw was found in libgcrypt\u0027s RSA implementation. This issue may allow a remote attacker to initiate a Bleichenbacher-style attack, which can lead to the decryption of RSA ciphertexts.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-2236"
    },
    {
      "cve": "CVE-2024-2379",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl skips the certificate verification for a QUIC connection under certain conditions, when built to use wolfSSL. If told to use an unknown/bad cipher or curve, the error path accidentally skips the verification and returns OK, thus ignoring any certificate problems.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-2379"
    },
    {
      "cve": "CVE-2024-2398",
      "cwe": {
        "id": "CWE-772",
        "name": "Missing Release of Resource after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When an application tells libcurl it wants to allow HTTP/2 server push, and the amount of received headers for the push surpasses the maximum allowed limit (1000), libcurl aborts the server push. When aborting, libcurl inadvertently does not free all the previously allocated headers and instead leaks the memory.  Further, this error condition fails silently and is therefore not easily detected by an application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-2398"
    },
    {
      "cve": "CVE-2024-2466",
      "cwe": {
        "id": "CWE-297",
        "name": "Improper Validation of Certificate with Host Mismatch"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl did not check the server certificate of TLS connections done to a host specified as an IP address, when built to use mbedTLS.  libcurl would wrongly avoid using the set hostname function when the specified hostname was given as an IP address, therefore completely skipping the certificate check. This affects all uses of TLS protocols (HTTPS, FTPS, IMAPS, POPS3, SMTPS, etc).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:H/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-2466"
    },
    {
      "cve": "CVE-2024-2511",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Some non-default TLS server configurations can cause unbounded memory growth when processing TLSv1.3 sessions. An attacker may exploit certain server configurations to trigger unbounded memory growth that would lead to a Denial of Service This problem can occur in TLSv1.3 if the non-default SSL_OP_NO_TICKET option is being used (but not if early_data support is also configured and the default anti-replay protection is in use). In this case, under certain conditions, the session cache can get into an incorrect state and it will fail to flush properly as it fills. The session cache will continue to grow in an unbounded manner. A malicious client could deliberately create the scenario for this failure to force a Denial of Service. It may also happen by accident in normal operation. This issue only affects TLS servers supporting TLSv1.3. It does not affect TLS clients. The FIPS modules in 3.2, 3.1 and 3.0 are not affected by this issue. OpenSSL 1.0.2 is also not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-2511"
    },
    {
      "cve": "CVE-2024-2961",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The iconv() function in the GNU C Library versions 2.39 and older may overflow the output buffer passed to it by up to 4 bytes when converting strings to the ISO-2022-CN-EXT character set, which may be used to crash an application or overwrite a neighbouring variable.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-2961"
    },
    {
      "cve": "CVE-2024-5535",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Calling the OpenSSL API function SSL_select_next_proto with an empty supported client protocols buffer may cause a crash or memory contents to be sent to the peer. Impact summary: A buffer overread can have a range of potential consequences such as unexpected application beahviour or a crash. In particular this issue could result in up to 255 bytes of arbitrary private data from memory being sent to the peer leading to a loss of confidentiality. However, only applications that directly call the SSL_select_next_proto function with a 0 length list of supported client protocols are affected by this issue. This would normally never be a valid scenario and is typically not under attacker control but may occur by accident in the case of a configuration or programming error in the calling application. The OpenSSL API function SSL_select_next_proto is typically used by TLS applications that support ALPN (Application Layer Protocol Negotiation) or NPN (Next Protocol Negotiation). NPN is older, was never standardised and is deprecated in favour of ALPN. We believe that ALPN is significantly more widely deployed than NPN. The SSL_select_next_proto function accepts a list of protocols from the server and a list of protocols from the client and returns the first protocol that appears in the server list that also appears in the client list. In the case of no overlap between the two lists it returns the first item in the client list. In either case it will signal whether an overlap between the two lists was found. In the case where SSL_select_next_proto is called with a zero length client list it fails to notice this condition and returns the memory immediately following the client list pointer (and reports that there was no overlap in the lists). This function is typically called from a server side application callback for ALPN or a client side application callback for NPN. In the case of ALPN the list of protocols supplied by the client is guaranteed by libssl to never be zero in length. The list of server protocols comes from the application and should never normally be expected to be of zero length. In this case if the SSL_select_next_proto function has been called as expected (with the list supplied by the client passed in the client/client_len parameters), then the application will not be vulnerable to this issue. If the application has accidentally been configured with a zero length server list, and has accidentally passed that zero length server list in the client/client_len parameters, and has additionally failed to correctly handle a \"no overlap\" response (which would normally result in a handshake failure in ALPN) then it will be vulnerable to this problem. In the case of NPN, the protocol permits the client to opportunistically select a protocol when there is no overlap. OpenSSL returns the first client protocol in the no overlap case in support of this. The list of client protocols comes from the application and should never normally be expected to be of zero length. However if the SSL_select_next_proto function is accidentally called with a client_len of 0 then an invalid memory pointer will be returned instead. If the application uses this output as the opportunistic protocol then the loss of confidentiality will occur. This issue has been assessed as Low severity because applications are most likely to be vulnerable if they are using NPN instead of ALPN - but NPN is not widely used. It also requires an application configuration or programming error. Finally, this issue would not typically be under attacker control making active exploitation unlikely. The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. Due to the low severity of this issue we are not issuing new releases of OpenSSL at this time. The fix will be included in the next releases when they become available.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-5535"
    },
    {
      "cve": "CVE-2024-5742",
      "cwe": {
        "id": "CWE-377",
        "name": "Insecure Temporary File"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in GNU Nano that allows a possible privilege escalation through an insecure temporary file. If Nano is killed while editing, a file it saves to an emergency file with the permissions of the running user provides a window of opportunity for attackers to escalate privileges through a malicious symlink.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:H/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-5742"
    },
    {
      "cve": "CVE-2024-6409",
      "cwe": {
        "id": "CWE-364",
        "name": "Signal Handler Race Condition"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A race condition vulnerability was discovered in how signals are handled by OpenSSH\u0027s server (sshd). If a remote attacker does not authenticate within a set time period, then sshd\u0027s SIGALRM handler is called asynchronously. However, this signal handler calls various functions that are not async-signal-safe, for example, syslog(). As a consequence of a successful attack, in the worst case scenario, an attacker may be able to perform a remote code execution (RCE) as an unprivileged user running the sshd server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:L/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-6409"
    },
    {
      "cve": "CVE-2024-7264",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl\u0027s ASN1 parser code has the `GTime2str()` function, used for parsing an ASN.1 Generalized Time field. If given an syntactically incorrect field, the parser might end up using -1 for the length of the *time fraction*, leading to a `strlen()` getting performed on a pointer to a heap buffer area that is not (purposely) null terminated. This flaw most likely leads to a crash, but can also lead to heap contents getting returned to the application when [CURLINFO_CERTINFO](https://curl.se/libcurl/c/CURLINFO_CERTINFO.html) is used.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-7264"
    },
    {
      "cve": "CVE-2024-8096",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl is told to use the Certificate Status Request TLS extension, often referred to as OCSP stapling, to verify that the server certificate is valid, it might fail to detect some OCSP problems and instead wrongly consider the response as fine. If the returned status reports another error than \u0027revoked\u0027 (like for example \u0027unauthorized\u0027) it is not treated as a bad certficate.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-8096"
    },
    {
      "cve": "CVE-2024-8176",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A stack overflow vulnerability exists in the libexpat library due to the way it handles recursive entity expansion in XML documents. When parsing an XML document with deeply nested entity references, libexpat can be forced to recurse indefinitely, exhausting the stack space and causing a crash. This issue could lead to denial of service (DoS) or, in some cases, exploitable memory corruption, depending on the environment and library usage.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-8176"
    },
    {
      "cve": "CVE-2024-9143",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Use of the low-level GF(2m) elliptic curve APIs with untrusted explicit values for the field polynomial can lead to out-of-bounds memory reads or writes. Impact summary: Out of bound memory writes can lead to an application crash or even a possibility of a remote code execution, however, in all the protocols involving Elliptic Curve Cryptography that we\u0027re aware of, either only \"named curves\" are supported, or, if explicit curve parameters are supported, they specify an X9.62 encoding of binary (GF(2m)) curves that can\u0027t represent problematic input values. Thus the likelihood of existence of a vulnerable application is low. In particular, the X9.62 encoding is used for ECC keys in X.509 certificates, so problematic inputs cannot occur in the context of processing X.509 certificates. Any problematic use-cases would have to be using an \"exotic\" curve encoding. The affected APIs include: EC_GROUP_new_curve_GF2m(), EC_GROUP_new_from_params(), and various supporting BN_GF2m_*() functions. Applications working with \"exotic\" explicit binary (GF(2m)) curve parameters, that make it possible to represent invalid field polynomials with a zero constant term, via the above or similar APIs, may terminate abruptly as a result of reading or writing outside of array bounds. Remote code execution cannot easily be ruled out. The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-9143"
    },
    {
      "cve": "CVE-2024-11053",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When asked to both use a `.netrc` file for credentials and to follow HTTP redirects, curl could leak the password used for the first host to the followed-to host under certain circumstances. This flaw only manifests itself if the netrc file has an entry that matches the redirect target hostname but the entry either omits just the password or omits both login and password.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-11053"
    },
    {
      "cve": "CVE-2024-12133",
      "cwe": {
        "id": "CWE-407",
        "name": "Inefficient Algorithmic Complexity"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw in libtasn1 causes inefficient handling of specific certificate data. When processing a large number of elements in a certificate, libtasn1 takes much longer than expected, which can slow down or even crash the system. This flaw allows an attacker to send a specially crafted certificate, causing a denial of service attack.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-12133"
    },
    {
      "cve": "CVE-2024-12243",
      "cwe": {
        "id": "CWE-407",
        "name": "Inefficient Algorithmic Complexity"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in GnuTLS, which relies on libtasn1 for ASN.1 data processing. Due to an inefficient algorithm in libtasn1, decoding certain DER-encoded certificate data can take excessive time, leading to increased resource consumption. This flaw allows a remote attacker to send a specially crafted certificate, causing GnuTLS to become unresponsive or slow, resulting in a denial-of-service condition.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-12243"
    },
    {
      "cve": "CVE-2024-26645",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: tracing: Ensure visibility when inserting an element into tracing_map.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-26645"
    },
    {
      "cve": "CVE-2024-26671",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: blk-mq: fix IO hang from sbitmap wakeup race.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-26671"
    },
    {
      "cve": "CVE-2024-26679",
      "cwe": {
        "id": "CWE-413",
        "name": "Improper Resource Locking"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved:\r\n\r\ninet: read sk-\u003esk_family once in inet_recv_error()",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-26679"
    },
    {
      "cve": "CVE-2024-26772",
      "cwe": {
        "id": "CWE-413",
        "name": "Improper Resource Locking"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved:\r\n\r\next4: avoid allocating blocks from corrupted group in ext4_mb_find_by_goal()\r\n\r\nPlaces the logic for checking if the group\u0027s block bitmap is corrupt under\r\nthe protection of the group lock to avoid allocating blocks from the group\r\nwith a corrupted block bitmap.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-26772"
    },
    {
      "cve": "CVE-2024-26773",
      "cwe": {
        "id": "CWE-413",
        "name": "Improper Resource Locking"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: ext4: avoid allocating blocks from corrupted group in ext4_mb_try_best_found().",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-26773"
    },
    {
      "cve": "CVE-2024-26777",
      "cwe": {
        "id": "CWE-369",
        "name": "Divide By Zero"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved:\r\n\r\nfbdev: sis: Error out if pixclock equals zero",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-26777"
    },
    {
      "cve": "CVE-2024-26805",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: netlink: Fix kernel-infoleak-after-free in skb_datagram_iter.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-26805"
    },
    {
      "cve": "CVE-2024-26835",
      "cwe": {
        "id": "CWE-459",
        "name": "Incomplete Cleanup"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved:\r\n\r\nnetfilter: nf_tables: set dormant flag on hook register failure",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-26835"
    },
    {
      "cve": "CVE-2024-26863",
      "cwe": {
        "id": "CWE-908",
        "name": "Use of Uninitialized Resource"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: hsr: Fix uninit-value access in hsr_get_node().",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-26863"
    },
    {
      "cve": "CVE-2024-26878",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: quota: Fix potential NULL pointer dereference.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-26878"
    },
    {
      "cve": "CVE-2024-26880",
      "cwe": {
        "id": "CWE-99",
        "name": "Improper Control of Resource Identifiers (\u0027Resource Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: dm: call the resume method on internal suspend.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-26880"
    },
    {
      "cve": "CVE-2024-26898",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-26898"
    },
    {
      "cve": "CVE-2024-26901",
      "cwe": {
        "id": "CWE-908",
        "name": "Use of Uninitialized Resource"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: do_sys_name_to_handle(): use kzalloc() to fix kernel-infoleak.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-26901"
    },
    {
      "cve": "CVE-2024-26923",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: af_unix: Fix garbage collector racing against connect().",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-26923"
    },
    {
      "cve": "CVE-2024-26957",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: fix reference counting on zcrypt card objects.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-26957"
    },
    {
      "cve": "CVE-2024-26973",
      "cwe": {
        "id": "CWE-457",
        "name": "Use of Uninitialized Variable"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: fat: fix uninitialized field in nostale filehandles When fat_encode_fh_nostale() encodes file handle without a parent it stores only first 10 bytes of the file handle. However the length of the file handle must be a multiple of 4 so the file handle is actually 12 bytes long and the last two bytes remain uninitialized. This is not great at we potentially leak uninitialized information with the handle to userspace. Properly initialize the full handle length.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-26973"
    },
    {
      "cve": "CVE-2024-27020",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: Fix potential data-race in nft_expr_type_get().",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-27020"
    },
    {
      "cve": "CVE-2024-27032",
      "cwe": {
        "id": "CWE-833",
        "name": "Deadlock"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid potential panic during recovery During recovery, if FAULT_BLOCK is on, it is possible that f2fs_reserve_new_block() will return -ENOSPC during recovery, then it may trigger panic. Also, if fault injection rate is 1 and only FAULT_BLOCK fault type is on, it may encounter deadloop in loop of block reservation. Let\u0027s change as below to fix these issues: - remove bug_on() to avoid panic. - limit the loop count of block reservation to avoid potential deadloop.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-27032"
    },
    {
      "cve": "CVE-2024-27065",
      "cwe": {
        "id": "CWE-1287",
        "name": "Improper Validation of Specified Type of Input"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: do not compare internal table flags on updates Restore skipping transaction if table update does not modify flags.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-27065"
    },
    {
      "cve": "CVE-2024-27074",
      "cwe": {
        "id": "CWE-772",
        "name": "Missing Release of Resource after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: media: go7007: fix a memleak in go7007_load_encoder.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-27074"
    },
    {
      "cve": "CVE-2024-28085",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "wall in util-linux through 2.40, often installed with setgid tty permissions, allows escape sequences to be sent to other users\u0027 terminals through argv. (Specifically, escape sequences received from stdin are blocked, but escape sequences received from argv are not blocked.) There may be plausible scenarios where this leads to account takeover.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.0"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-28085"
    },
    {
      "cve": "CVE-2024-28182",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nghttp2 is an implementation of the Hypertext Transfer Protocol version 2 in C. The nghttp2 library prior to version 1.61.0 keeps reading the unbounded number of HTTP/2 CONTINUATION frames even after a stream is reset to keep HPACK context in sync.  This causes excessive CPU usage to decode HPACK stream. nghttp2 v1.61.0 mitigates this vulnerability by limiting the number of CONTINUATION frames it accepts per stream. There is no workaround for this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-28182"
    },
    {
      "cve": "CVE-2024-28757",
      "cwe": {
        "id": "CWE-776",
        "name": "Improper Restriction of Recursive Entity References in DTDs (\u0027XML Entity Expansion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libexpat through 2.6.1 allows an XML Entity Expansion attack when there is isolated use of external parsers (created via XML_ExternalEntityParserCreate).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-28757"
    },
    {
      "cve": "CVE-2024-28834",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in GnuTLS. The Minerva attack is a cryptographic vulnerability that exploits deterministic behavior in systems like GnuTLS, leading to side-channel leaks. In specific scenarios, such as when using the GNUTLS_PRIVKEY_FLAG_REPRODUCIBLE flag, it can result in a noticeable step in nonce size from 513 to 512 bits, exposing a potential timing side-channel.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-28834"
    },
    {
      "cve": "CVE-2024-28835",
      "cwe": {
        "id": "CWE-248",
        "name": "Uncaught Exception"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw has been discovered in GnuTLS where an application crash can be induced when attempting to verify a specially crafted .pem bundle using the \"certtool --verify-chain\" command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.0,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:R/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-28835"
    },
    {
      "cve": "CVE-2024-33599",
      "cwe": {
        "id": "CWE-121",
        "name": "Stack-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nscd: Stack-based buffer overflow in netgroup cache\r\n\r\nIf the Name Service Cache Daemon\u0027s (nscd) fixed size cache is exhausted\r\nby client requests then a subsequent client request for netgroup data\r\nmay result in a stack-based buffer overflow.  This flaw was introduced\r\nin glibc 2.15 when the cache was added to nscd.\r\n\r\nThis vulnerability is only present in the nscd binary.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.6,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-33599"
    },
    {
      "cve": "CVE-2024-33600",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nscd: Null pointer crashes after notfound response\r\n\r\nIf the Name Service Cache Daemon\u0027s (nscd) cache fails to add a not-found\r\nnetgroup response to the cache, the client request can result in a null\r\npointer dereference.  This flaw was introduced in glibc 2.15 when the\r\ncache was added to nscd.\r\n\r\nThis vulnerability is only present in the nscd binary.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-33600"
    },
    {
      "cve": "CVE-2024-33601",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nscd: netgroup cache may terminate daemon on memory allocation failure\r\n\r\nThe Name Service Cache Daemon\u0027s (nscd) netgroup cache uses xmalloc or\r\nxrealloc and these functions may terminate the process due to a memory\r\nallocation failure resulting in a denial of service to the clients.  The\r\nflaw was introduced in glibc 2.15 when the cache was added to nscd.\r\n\r\nThis vulnerability is only present in the nscd binary.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.0,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-33601"
    },
    {
      "cve": "CVE-2024-33602",
      "cwe": {
        "id": "CWE-466",
        "name": "Return of Pointer Value Outside of Expected Range"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nscd: netgroup cache assumes NSS callback uses in-buffer strings\r\n\r\nThe Name Service Cache Daemon\u0027s (nscd) netgroup cache can corrupt memory\r\nwhen the NSS callback does not store all strings in the provided buffer.\r\nThe flaw was introduced in glibc 2.15 when the cache was added to nscd.\r\n\r\nThis vulnerability is only present in the nscd binary.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.0,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-33602"
    },
    {
      "cve": "CVE-2024-33621",
      "cwe": {
        "id": "CWE-1287",
        "name": "Improper Validation of Specified Type of Input"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: ipvlan: Dont Use skb-\u003esk in ipvlan_process_v4 / 6_outbound.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-33621"
    },
    {
      "cve": "CVE-2024-34459",
      "cwe": {
        "id": "CWE-126",
        "name": "Buffer Over-read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in xmllint (from libxml2) before 2.11.8 and 2.12.x before 2.12.7. Formatting error messages with xmllint --htmlout can result in a buffer over-read in xmlHTMLPrintFileContext in xmllint.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-34459"
    },
    {
      "cve": "CVE-2024-35807",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: ext4: fix corruption during on-line resize.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-35807"
    },
    {
      "cve": "CVE-2024-35809",
      "cwe": {
        "id": "CWE-1287",
        "name": "Improper Validation of Specified Type of Input"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: PCI/PM: Drain runtime-idle callbacks before driver removal.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-35809"
    },
    {
      "cve": "CVE-2024-35830",
      "cwe": {
        "id": "CWE-665",
        "name": "Improper Initialization"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: media: tc358743: register v4l2 async device only after successful setup Ensure the device has been setup correctly before registering the v4l2 async device, thus allowing userspace to access.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-35830"
    },
    {
      "cve": "CVE-2024-35888",
      "cwe": {
        "id": "CWE-457",
        "name": "Use of Uninitialized Variable"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: erspan: make sure erspan_base_hdr is present in skb-\u003ehead.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-35888"
    },
    {
      "cve": "CVE-2024-35910",
      "cwe": {
        "id": "CWE-665",
        "name": "Improper Initialization"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: tcp: properly terminate timers for kernel sockets We had various syzbot reports about tcp timers firing after the corresponding netns has been dismantled. Fortunately Josef Bacik could trigger the issue more often, and could test a patch I wrote two years ago. When TCP sockets are closed, we call inet_csk_clear_xmit_timers() to \u0027stop\u0027 the timers. inet_csk_clear_xmit_timers() can be called from any context, including when socket lock is held. This is the reason it uses sk_stop_timer(), aka del_timer(). This means that ongoing timers might finish much later. For user sockets, this is fine because each running timer holds a reference on the socket, and the user socket holds a reference on the netns. For kernel sockets, we risk that the netns is freed before timer can complete, because kernel sockets do not hold reference on the netns. This patch adds inet_csk_clear_xmit_timers_sync() function that using sk_stop_timer_sync() to make sure all timers are terminated before the kernel socket is released. Modules using kernel sockets close them in their netns exit() handler. Also add sock_not_owned_by_me() helper to get LOCKDEP support : inet_csk_clear_xmit_timers_sync() must not be called while socket lock is held. It is very possible we can revert in the future commit 3a58f13a881e (\"net: rds: acquire refcount on TCP sockets\") which attempted to solve the issue in rds only. (net/smc/af_smc.c and net/mptcp/subflow.c have similar code) We probably can remove the check_net() tests from tcp_out_of_resources() and __tcp_close() in the future.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.8,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:L/I:L/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-35910"
    },
    {
      "cve": "CVE-2024-35925",
      "cwe": {
        "id": "CWE-369",
        "name": "Divide By Zero"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: block: prevent division by zero in blk_rq_stat_sum() The expression dst-\u003enr_samples + src-\u003enr_samples may have zero value on overflow. It is necessary to add a check to avoid division by zero. Found by Linux Verification Center (linuxtesting.org) with Svace.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-35925"
    },
    {
      "cve": "CVE-2024-35944",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: VMCI: Fix memcpy() run-time warning in dg_dispatch_as_host().",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-35944"
    },
    {
      "cve": "CVE-2024-36017",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: rtnetlink: Correct nested IFLA_VF_VLAN_LIST attribute validation Each attribute inside a nested IFLA_VF_VLAN_LIST is assumed to be a struct ifla_vf_vlan_info so the size of such attribute needs to be at least of sizeof(struct ifla_vf_vlan_info) which is 14 bytes. The current size validation in do_setvfinfo is against NLA_HDRLEN (4 bytes) which is less than sizeof(struct ifla_vf_vlan_info) so this validation is not enough and a too small attribute might be cast to a struct ifla_vf_vlan_info, this might result in an out of bands read access when accessing the saved (casted) entry in ivvl.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-36017"
    },
    {
      "cve": "CVE-2024-36286",
      "cwe": {
        "id": "CWE-1287",
        "name": "Improper Validation of Specified Type of Input"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_queue: acquire rcu_read_lock() in instance_destroy_rcu().",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-36286"
    },
    {
      "cve": "CVE-2024-36484",
      "cwe": {
        "id": "CWE-99",
        "name": "Improper Control of Resource Identifiers (\u0027Resource Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: net: relax socket state check at accept time.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-36484"
    },
    {
      "cve": "CVE-2024-36904",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: tcp: Use refcount_inc_not_zero() in tcp_twsk_unique().",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-36904"
    },
    {
      "cve": "CVE-2024-36905",
      "cwe": {
        "id": "CWE-369",
        "name": "Divide By Zero"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: tcp: defer shutdown(SEND_SHUTDOWN) for TCP_SYN_RECV sockets.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-36905"
    },
    {
      "cve": "CVE-2024-36934",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: bna: ensure the copied buf is NUL terminated Currently, we allocate a nbytes-sized kernel buffer and copy nbytes from userspace to that buffer. Later, we use sscanf on this buffer but we don\u0027t ensure that the string is terminated inside the buffer, this can lead to OOB read when using sscanf. Fix this issue by using memdup_user_nul instead of memdup_user.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-36934"
    },
    {
      "cve": "CVE-2024-37356",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: tcp: Fix shift-out-of-bounds in dctcp_update_alpha().",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.6,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-37356"
    },
    {
      "cve": "CVE-2024-37370",
      "cwe": {
        "id": "CWE-130",
        "name": "Improper Handling of Length Parameter Inconsistency"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In MIT Kerberos 5 (aka krb5) before 1.21.3, an attacker can modify the plaintext Extra Count field of a confidential GSS krb5 wrap token, causing the unwrapped token to appear truncated to the application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-37370"
    },
    {
      "cve": "CVE-2024-37371",
      "cwe": {
        "id": "CWE-130",
        "name": "Improper Handling of Length Parameter Inconsistency"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In MIT Kerberos 5 (aka krb5) before 1.21.3, an attacker can cause invalid memory reads during GSS message token handling by sending message tokens with invalid length fields.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-37371"
    },
    {
      "cve": "CVE-2024-38596",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: af_unix: Fix data races in unix_release_sock/unix_stream_sendmsg.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-38596"
    },
    {
      "cve": "CVE-2024-38598",
      "cwe": {
        "id": "CWE-667",
        "name": "Improper Locking"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: md: fix resync softlockup when bitmap size is less than array size.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-38598"
    },
    {
      "cve": "CVE-2024-38612",
      "cwe": {
        "id": "CWE-459",
        "name": "Incomplete Cleanup"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: ipv6: sr: fix invalid unregister error path The error path of seg6_init() is wrong in case CONFIG_IPV6_SEG6_LWTUNNEL is not defined. In that case if seg6_hmac_init() fails, the genl_unregister_family() isn\u0027t called. This issue exist since commit 46738b1317e1 (\"ipv6: sr: add option to control lwtunnel support\"), and commit 5559cea2d5aa (\"ipv6: sr: fix possible use-after-free and null-ptr-deref\") replaced unregister_pernet_subsys() with genl_unregister_family() in this error path.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-38612"
    },
    {
      "cve": "CVE-2024-38621",
      "cwe": {
        "id": "CWE-121",
        "name": "Stack-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: media: stk1160: fix bounds checking in stk1160_copy_video() The subtract in this condition is reversed. The -\u003elength is the length of the buffer. The -\u003ebytesused is how many bytes we have copied thus far. When the condition is reversed that means the result of the subtraction is always negative but since it\u0027s unsigned then the result is a very high positive value. That means the overflow check is never true. Additionally, the -\u003ebytesused doesn\u0027t actually work for this purpose because we\u0027re not writing to \"buf-\u003emem + buf-\u003ebytesused\". Instead, the math to calculate the destination where we are writing is a bit involved. You calculate the number of full lines already written, multiply by two, skip a line if necessary so that we start on an odd numbered line, and add the offset into the line. To fix this buffer overflow, just take the actual destination where we are writing, if the offset is already out of bounds print an error and return. Otherwise, write up to buf-\u003elength bytes.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-38621"
    },
    {
      "cve": "CVE-2024-38780",
      "cwe": {
        "id": "CWE-667",
        "name": "Improper Locking"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: dma-buf/sw-sync: don\u0027t enable IRQ from sync_print_obj().",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-38780"
    },
    {
      "cve": "CVE-2024-39292",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: um: Add winch to winch_handlers before registering winch IRQ Registering a winch IRQ is racy, an interrupt may occur before the winch is added to the winch_handlers list. If that happens, register_winch_irq() adds to that list a winch that is scheduled to be (or has already been) freed, causing a panic later in winch_cleanup(). Avoid the race by adding the winch to the winch_handlers list before registering the IRQ, and rolling back if um_request_irq() fails.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-39292"
    },
    {
      "cve": "CVE-2024-39469",
      "cwe": {
        "id": "CWE-1050",
        "name": "Excessive Platform Resource Consumption within a Loop"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix nilfs_empty_dir() misjudgment and long loop on I/O errors The error handling in nilfs_empty_dir() when a directory folio/page read fails is incorrect, as in the old ext2 implementation, and if the folio/page cannot be read or nilfs_check_folio() fails, it will falsely determine the directory as empty and corrupt the file system. In addition, since nilfs_empty_dir() does not immediately return on a failed folio/page read, but continues to loop, this can cause a long loop with I/O if i_size of the directory\u0027s inode is also corrupted, causing the log writer thread to wait and hang, as reported by syzbot. Fix these issues by making nilfs_empty_dir() immediately return a false value (0) if it fails to get a directory folio/page.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-39469"
    },
    {
      "cve": "CVE-2024-39487",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: bonding: Fix out-of-bounds read in bond_option_arp_ip_targets_set().",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-39487"
    },
    {
      "cve": "CVE-2024-39489",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: ipv6: sr: fix memleak in seg6_hmac_init_algo seg6_hmac_init_algo returns without cleaning up the previous allocations if one fails, so it\u0027s going to leak all that memory and the crypto tfms. Update seg6_hmac_exit to only free the memory when allocated, so we can reuse the code directly.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-39489"
    },
    {
      "cve": "CVE-2024-40901",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Avoid test/set_bit() operating in non-allocated memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-40901"
    },
    {
      "cve": "CVE-2024-40959",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: xfrm6: check ip6_dst_idev() return value in xfrm6_get_saddr().",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-40959"
    },
    {
      "cve": "CVE-2024-41046",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: net: ethernet: lantiq_etop: fix double free in detach The number of the currently released descriptor is never incremented which results in the same skb being released multiple times.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-41046"
    },
    {
      "cve": "CVE-2024-42070",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: fully validate NFT_DATA_VALUE on store to data registers register store validation for NFT_DATA_VALUE is conditional, however, the datatype is always either NFT_DATA_VALUE or NFT_DATA_VERDICT. This only requires a new helper function to infer the register type from the set datatype so this conditional check can be removed. Otherwise, pointer to chain object can be leaked through the registers.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-42070"
    },
    {
      "cve": "CVE-2024-42096",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: x86: stop playing stack games in profile_pc().",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:L/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-42096"
    },
    {
      "cve": "CVE-2024-42106",
      "cwe": {
        "id": "CWE-908",
        "name": "Use of Uninitialized Resource"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: inet_diag: Initialize pad field in struct inet_diag_req_v2.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-42106"
    },
    {
      "cve": "CVE-2024-42131",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: mm: avoid overflows in dirty throttling logic The dirty throttling logic is interspersed with assumptions that dirty limits in PAGE_SIZE units fit into 32-bit (so that various multiplications fit into 64-bits). If limits end up being larger, we will hit overflows, possible divisions by 0 etc. Fix these problems by never allowing so large dirty limits as they have dubious practical value anyway. For dirty_bytes / dirty_background_bytes interfaces we can just refuse to set so large limits. For dirty_ratio / dirty_background_ratio it isn\u0027t so simple as the dirty limit is computed from the amount of available memory which can change due to memory hotplug etc. So when converting dirty limits from ratios to numbers of pages, we just don\u0027t allow the result to exceed UINT_MAX. This is root-only triggerable problem which occurs when the operator sets dirty limits to \u003e16 TB.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-42131"
    },
    {
      "cve": "CVE-2024-42154",
      "cwe": {
        "id": "CWE-805",
        "name": "Buffer Access with Incorrect Length Value"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: tcp_metrics: validate source addr length I don\u0027t see anything checking that TCP_METRICS_ATTR_SADDR_IPV4 is at least 4 bytes long, and the policy doesn\u0027t have an entry for this attribute at all (neither does it for IPv6 but v6 is manually validated).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-42154"
    },
    {
      "cve": "CVE-2024-43871",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: devres: Fix memory leakage caused by driver API devm_free_percpu() It will cause memory leakage when use driver API devm_free_percpu() to free memory allocated by devm_alloc_percpu(), fixed by using devres_release() instead of devres_destroy() within devm_free_percpu().",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-43871"
    },
    {
      "cve": "CVE-2024-44944",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: use helper function to calculate expect ID Delete expectation path is missing a call to the nf_expect_get_id() helper function to calculate the expectation ID, otherwise LSB of the expectation object address is leaked to userspace.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-44944"
    },
    {
      "cve": "CVE-2024-44965",
      "cwe": {
        "id": "CWE-229",
        "name": "Improper Handling of Values"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: x86/mm: Fix pti_clone_pgtable() alignment assumption Guenter reported dodgy crashes on an i386-nosmp build using GCC-11 that had the form of endless traps until entry stack exhaust and then #DF from the stack guard. It turned out that pti_clone_pgtable() had alignment assumptions on the start address, notably it hard assumes start is PMD aligned. This is true on x86_64, but very much not true on i386. These assumptions can cause the end condition to malfunction, leading to a \u0027short\u0027 clone. Guess what happens when the user mapping has a short copy of the entry text? Use the correct increment form for addr to avoid alignment assumptions.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-44965"
    },
    {
      "cve": "CVE-2024-45490",
      "cwe": {
        "id": "CWE-131",
        "name": "Incorrect Calculation of Buffer Size"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libexpat before 2.6.3. xmlparse.c does not reject a negative length for XML_ParseBuffer.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-45490"
    },
    {
      "cve": "CVE-2024-45491",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libexpat before 2.6.3. dtdCopy in xmlparse.c can have an integer overflow for nDefaultAtts on 32-bit platforms (where UINT_MAX equals SIZE_MAX).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.3,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-45491"
    },
    {
      "cve": "CVE-2024-45492",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libexpat before 2.6.3. nextScaffoldPart in xmlparse.c can have an integer overflow for m_groupSize on 32-bit platforms (where UINT_MAX equals SIZE_MAX).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.3,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-45492"
    },
    {
      "cve": "CVE-2024-46743",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: of/irq: Prevent device address out-of-bounds read in interrupt map walk.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-46743"
    },
    {
      "cve": "CVE-2024-46745",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: Input: uinput - reject requests with unreasonable number of slots When exercising uinput interface syzkaller may try setting up device with a really large number of slots, which causes memory allocation failure in input_mt_init_slots(). While this allocation failure is handled properly and request is rejected, it results in syzkaller reports. Additionally, such request may put undue burden on the system which will try to free a lot of memory for a bogus request. Fix it by limiting allowed number of slots to 100. This can easily be extended if we see devices that can track more than 100 contacts.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-46745"
    },
    {
      "cve": "CVE-2024-46750",
      "cwe": {
        "id": "CWE-413",
        "name": "Improper Resource Locking"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: PCI: Add missing bridge lock to pci_bus_lock().",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-46750"
    },
    {
      "cve": "CVE-2024-47684",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: tcp: check skb is non-NULL in tcp_rto_delta_us().",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-47684"
    },
    {
      "cve": "CVE-2024-47701",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: ext4: avoid OOB when system.data xattr changes underneath the filesystem.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-47701"
    },
    {
      "cve": "CVE-2024-47707",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ipv6: A NULL dereference vulnerability may occur in rt6_uncached_list_flush_dev() due to the necessary check being removed by a previous commit.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-47707"
    },
    {
      "cve": "CVE-2024-47737",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: nfsd: call cache_put if xdr_reserve_space returns NULL.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-47737"
    },
    {
      "cve": "CVE-2024-48881",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "bcache: revert replacing IS_ERR_OR_NULL with IS_ERR again.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-48881"
    },
    {
      "cve": "CVE-2024-49881",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: ext4: update orig_path in ext4_find_extent().",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-49881"
    },
    {
      "cve": "CVE-2024-49884",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: ext4: fix slab-use-after-free in ext4_split_extent_at().",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-49884"
    },
    {
      "cve": "CVE-2024-49948",
      "cwe": {
        "id": "CWE-124",
        "name": "Buffer Underwrite (\u0027Buffer Underflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: net: add more sanity checks to qdisc_pkt_len_init().",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-49948"
    },
    {
      "cve": "CVE-2024-49949",
      "cwe": {
        "id": "CWE-124",
        "name": "Buffer Underwrite (\u0027Buffer Underflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: net: avoid potential underflow in qdisc_pkt_len_init() with UFO.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-49949"
    },
    {
      "cve": "CVE-2024-49952",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: prevent nf_skb_duplicated corruption.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-49952"
    },
    {
      "cve": "CVE-2024-49982",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: aoe: fix the potential use-after-free problem in more places For fixing CVE-2023-6270, f98364e92662 (\"aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts\") makes tx() calling dev_put() instead of doing in aoecmd_cfg_pkts(). It avoids that the tx() runs into use-after-free. Then Nicolai Stange found more places in aoe have potential use-after-free problem with tx(). e.g. revalidate(), aoecmd_ata_rw(), resend(), probe() and aoecmd_cfg_rsp(). Those functions also use aoenet_xmit() to push packet to tx queue. So they should also use dev_hold() to increase the refcnt of skb-\u003edev. On the other hand, moving dev_put() to tx() causes that the refcnt of skb-\u003edev be reduced to a negative value, because corresponding dev_hold() are not called in revalidate(), aoecmd_ata_rw(), resend(), probe(), and aoecmd_cfg_rsp(). This patch fixed this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-49982"
    },
    {
      "cve": "CVE-2024-49997",
      "cwe": {
        "id": "CWE-226",
        "name": "Sensitive Information in Resource Not Removed Before Reuse"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: net: ethernet: lantiq_etop: fix memory disclosure When applying padding, the buffer is not zeroed, which results in memory disclosure. The mentioned data is observed on the wire. This patch uses skb_put_padto() to pad Ethernet frames properly. The mentioned function zeroes the expanded buffer. In case the packet cannot be padded it is silently dropped. Statistics are also not incremented. This driver does not support statistics in the old 32-bit format or the new 64-bit format. These will be added in the future. In its current form, the patch should be easily backported to stable versions. Ethernet MACs on Amazon-SE and Danube cannot do padding of the packets in hardware, so software padding must be applied.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-49997"
    },
    {
      "cve": "CVE-2024-50006",
      "cwe": {
        "id": "CWE-833",
        "name": "Deadlock"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: ext4: fix i_data_sem unlock order in ext4_ind_migrate().",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-50006"
    },
    {
      "cve": "CVE-2024-50040",
      "cwe": {
        "id": "CWE-390",
        "name": "Detection of Error Condition Without Action"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: igb: Do not bring the device up after non-fatal error.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.2,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-50040"
    },
    {
      "cve": "CVE-2024-50045",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: netfilter: br_netfilter: fix panic with metadata_dst skb.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-50045"
    },
    {
      "cve": "CVE-2024-50251",
      "cwe": {
        "id": "CWE-131",
        "name": "Incorrect Calculation of Buffer Size"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_payload: sanitize offset and length before calling skb_checksum() If access to offset + length is larger than the skbuff length, then skb_checksum() triggers BUG_ON(). skb_checksum() internally subtracts the length parameter while iterating over skbuff, BUG_ON(len) at the end of it checks that the expected length to be included in the checksum calculation is fully consumed.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-50251"
    },
    {
      "cve": "CVE-2024-50262",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: bpf: Fix out-of-bounds write in trie_get_next_key().",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-50262"
    },
    {
      "cve": "CVE-2024-50299",
      "cwe": {
        "id": "CWE-131",
        "name": "Incorrect Calculation of Buffer Size"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: sctp: properly validate chunk size in sctp_sf_ootb()",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-50299"
    },
    {
      "cve": "CVE-2024-50301",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: security/keys: fix slab-out-of-bounds in key_task_permission.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-50301"
    },
    {
      "cve": "CVE-2024-50602",
      "cwe": {
        "id": "CWE-754",
        "name": "Improper Check for Unusual or Exceptional Conditions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libexpat before 2.6.4. There is a crash within the XML_ResumeParser function because XML_StopParser can stop/suspend an unstarted parser.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-50602"
    },
    {
      "cve": "CVE-2024-52332",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "igb: Fix potential invalid memory access in igb_init_module() The pci_register_driver() can fail and when this happened, the dca_notifier needs to be unregistered, otherwise the dca_notifier can be called when igb fails to install, resulting to invalid memory access.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-52332"
    },
    {
      "cve": "CVE-2024-52533",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "gio/gsocks4aproxy.c in GNOME GLib before 2.82.1 has an off-by-one error and resultant buffer overflow because SOCKS4_CONN_MSG_LEN is not sufficient for a trailing \u0027\\\\0\u0027 character.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:L/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-52533"
    },
    {
      "cve": "CVE-2024-53057",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: net/sched: stop qdisc_tree_reduce_backlog on TC_H_ROOT.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-53057"
    },
    {
      "cve": "CVE-2024-53124",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "net: fix data-races around sk sk_forward_alloc.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-53124"
    },
    {
      "cve": "CVE-2024-53140",
      "cwe": {
        "id": "CWE-755",
        "name": "Improper Handling of Exceptional Conditions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: netlink: terminate outstanding dump on socket close Netlink supports iterative dumping of data. It provides the families the following ops: - start - (optional) kicks off the dumping process - dump - actual dump helper, keeps getting called until it returns 0 - done - (optional) pairs with .start, can be used for cleanup The whole process is asynchronous and the repeated calls to .dump don\u0027t actually happen in a tight loop, but rather are triggered in response to recvmsg() on the socket. This gives the user full control over the dump, but also means that the user can close the socket without getting to the end of the dump. To make sure .start is always paired with .done we check if there is an ongoing dump before freeing the socket, and if so call .done. The complication is that sockets can get freed from BH and .done is allowed to sleep. So we use a workqueue to defer the call, when needed. Unfortunately this does not work correctly. What we defer is not the cleanup but rather releasing a reference on the socket. We have no guarantee that we own the last reference, if someone else holds the socket they may release it in BH and we\u0027re back to square one. The whole dance, however, appears to be unnecessary. Only the user can interact with dumps, so we can clean up when socket is closed. And close always happens in process context. Some async code may still access the socket after close, queue notification skbs to it etc. but no dumps can start, end or otherwise make progress. Delete the workqueue and flush the dump state directly from the release handler. Note that further cleanup is possible in -next, for instance we now always call .done before releasing the main module reference, so dump doesn\u0027t have to take a reference of its own.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-53140"
    },
    {
      "cve": "CVE-2024-53164",
      "cwe": {
        "id": "CWE-459",
        "name": "Incomplete Cleanup"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: net: sched: fix ordering of qlen adjustment Changes to sch-\u003eq.qlen around qdisc_tree_reduce_backlog() need to happen _before_ a call to said function because otherwise it may fail to notify parent qdiscs when the child is about to become empty.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-53164"
    },
    {
      "cve": "CVE-2024-53165",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: sh: intc: Fix use-after-free bug in register_intc_controller() In the error handling for this function, d is freed without ever removing it from intc_list which would lead to a use after free. To fix this, let\u0027s only add it to the list after everything has succeeded.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-53165"
    },
    {
      "cve": "CVE-2024-53217",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: NFSD: Prevent NULL dereference in nfsd4_process_cb_update().",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-53217"
    },
    {
      "cve": "CVE-2024-56433",
      "cwe": {
        "id": "CWE-1188",
        "name": "Initialization of a Resource with an Insecure Default"
      },
      "notes": [
        {
          "category": "summary",
          "text": "shadow-utils (aka shadow) 4.4 through 4.17.0 establishes a default /etc/subuid behavior (e.g., uid 100000 through 165535 for the first user account) that can realistically conflict with the uids of users defined on locally administered networks, potentially leading to account takeover, e.g., by leveraging newuidmap for access to an NFS home directory (or same-host resources in the case of remote logins by these local network users). NOTE: it may also be argued that system administrators should not have assigned uids, within local networks, that are within the range that can occur in /etc/subuid.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.6,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:L/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-56433"
    },
    {
      "cve": "CVE-2024-56569",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ftrace: Fix regression with module command in stack_trace_filter When executing the following command: # echo \"write*:mod:ext3\" \u003e /sys/kernel/tracing/stack_trace_filter The current mod command causes a null pointer dereference. While commit 0f17976568b3f (\"ftrace: Fix regression with module command in stack_trace_filter\") has addressed part of the issue, it left a corner case unhandled, which still results in a kernel crash.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-56569"
    },
    {
      "cve": "CVE-2024-56570",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: ovl: Filter invalid inodes with missing lookup function Add a check to the ovl_dentry_weird() function to prevent the processing of directory inodes that lack the lookup function.This is important because such inodes can cause errors in overlayfs when passed to the lowerstack.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-56570"
    },
    {
      "cve": "CVE-2024-56600",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "net: inet6: do not leave a dangling sk pointer in inet6_create() sock_init_data() attaches the allocated sk pointer to the provided sock object. If inet6_create() fails later, the sk object is released, but the sock object retains the dangling sk pointer, which may cause use-after-free later. Clear the sock sk pointer on error.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-56600"
    },
    {
      "cve": "CVE-2024-56601",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: net: inet: do not leave a dangling sk pointer in inet_create() sock_init_data() attaches the allocated sk object to the provided sock object. If inet_create() fails later, the sk object is freed, but the sock object retains the dangling pointer, which may create use-after-free later. Clear the sk pointer in the sock object on error.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-56601"
    },
    {
      "cve": "CVE-2024-56606",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "af_packet: avoid erroring out after sock_init_data() in packet_create() After sock_init_data() the allocated sk object is attached to the provided sock object. On error, packet_create() frees the sk object leaving the dangling pointer in the sock object on return. Some other code may try to use this pointer and cause use-after-free.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-56606"
    },
    {
      "cve": "CVE-2024-56644",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: net/ipv6: release expired exception dst cached in socket Dst objects get leaked in ip6_negative_advice() when this function is executed for an expired IPv6 route located in the exception table.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-56644"
    },
    {
      "cve": "CVE-2024-56650",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: netfilter: x_tables: fix LED ID check in led_tg_check() Syzbot has reported the following BUG detected by KASAN",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-56650"
    },
    {
      "cve": "CVE-2024-56770",
      "cwe": {
        "id": "CWE-670",
        "name": "Always-Incorrect Control Flow Implementation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "net/sched: netem: The interface fully stops transferring packets and \"locks\". In this case, the child qdisc and tfifo are empty, but \u0027qlen\u0027 indicates the tfifo is at its limit and no more packets are accepted.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-56770"
    },
    {
      "cve": "CVE-2024-56779",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nfsd: fix nfs4_openowner leak when concurrent nfsd4_open occur\r\n\r\nThe action force umount(umount -f) will attempt to kill all rpc_task even\r\numount operation may ultimately fail if some files remain open.\r\nConsequently, if an action attempts to open a file, it can potentially\r\nsend two rpc_task to nfs server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-56779"
    },
    {
      "cve": "CVE-2024-56780",
      "cwe": {
        "id": "CWE-833",
        "name": "Deadlock"
      },
      "notes": [
        {
          "category": "summary",
          "text": "quota: flush quota_release_work upon quota writeback One of the paths quota writeback is called from is: freeze_super() sync_filesystem() ext4_sync_fs() dquot_writeback_dquots().",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-56780"
    },
    {
      "cve": "CVE-2024-57884",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "mm: vmscan: account for free pages to prevent infinite Loop in throttle_direct_reclaim()\r\n\r\nThe task sometimes continues looping in throttle_direct_reclaim() because\r\nallow_direct_reclaim(pgdat) keeps returning false.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-57884"
    },
    {
      "cve": "CVE-2024-57901",
      "cwe": {
        "id": "CWE-664",
        "name": "Improper Control of a Resource Through its Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "af_packet: vlan_get_protocol_dgram() vs MSG_PEEK Blamed allowing a crash.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-57901"
    },
    {
      "cve": "CVE-2025-0167",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When asked to use a .netrc file for credentials and to follow HTTP redirects, curl could leak the password used for the first host to the followed-to host under certain circumstances. This flaw only manifests itself if the netrc file has a default entry that omits both login and password. A rare circumstance.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.4,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:C/C:L/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2025-0167"
    },
    {
      "cve": "CVE-2025-0395",
      "cwe": {
        "id": "CWE-131",
        "name": "Incorrect Calculation of Buffer Size"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When the assert() function in the GNU C Library versions 2.13 to 2.40 fails, it does not allocate enough space for the assertion failure message string and size information, which may lead to a buffer overflow if the message string size aligns to page size.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2025-0395"
    },
    {
      "cve": "CVE-2025-0665",
      "cwe": {
        "id": "CWE-1341",
        "name": "Multiple Releases of Same Resource or Handle"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl would wrongly close the same eventfd file descriptor twice when taking down a connection channel after having completed a threaded name resolve.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.3,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2025-0665"
    },
    {
      "cve": "CVE-2025-0725",
      "cwe": {
        "id": "CWE-680",
        "name": "Integer Overflow to Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When libcurl is asked to perform automatic gzip decompression of content-encoded HTTP responses with the CURLOPT_ACCEPT_ENCODING option, using zlib 1.2.0.3 or older, an attacker-controlled integer overflow would make libcurl perform a buffer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.3,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2025-0725"
    },
    {
      "cve": "CVE-2025-1390",
      "cwe": {
        "id": "CWE-284",
        "name": "Improper Access Control"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The PAM module pam_cap.so of libcap configuration supports group names starting with \u201c@\u201d, during actual parsing, configurations not starting with \u201c@\u201d are incorrectly recognized as group names. This may result in nonintended users being granted an inherited capability set, potentially leading to security risks. Attackers can exploit this vulnerability to achieve local privilege escalation on systems where /etc/security/capability.conf is used to configure user inherited privileges by constructing specific usernames.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:H/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2025-1390"
    },
    {
      "cve": "CVE-2025-3277",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "1. Describe what is the vulnerability about, e.g.:\n    Affected devices do not properly validate input in the hack-me endpoint of the web service.\n\n    2. Describe what an attacker could do with it - e.g.:\n    This could allow an unauthenticated remote attacker to execute arbitrary code on the device.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 0.0,
            "baseSeverity": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:N/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2025-3277"
    },
    {
      "cve": "CVE-2025-3360",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "1. Describe what is the vulnerability about, e.g.:\n    Affected devices do not properly validate input in the hack-me endpoint of the web service.\n\n    2. Describe what an attacker could do with it - e.g.:\n    This could allow an unauthenticated remote attacker to execute arbitrary code on the device.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 0.0,
            "baseSeverity": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:N/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2025-3360"
    },
    {
      "cve": "CVE-2025-21694",
      "cwe": {
        "id": "CWE-667",
        "name": "Improper Locking"
      },
      "notes": [
        {
          "category": "summary",
          "text": "fs/proc: softlockup in __read_vmcore. Since commit 5cbcb62dddf5 (\"fs/proc: fix softlockup in __read_vmcore\") the number of softlockups in __read_vmcore at kdump time have gone down, but they still happen sometimes. In a memory constrained environment like the kdump image, a softlockup is not just a harmless message, but it can interfere with things like RCU freeing memory, causing the crashdump to get stuck.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2025-21694"
    },
    {
      "cve": "CVE-2025-26465",
      "cwe": {
        "id": "CWE-390",
        "name": "Detection of Error Condition Without Action"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in OpenSSH when the VerifyHostKeyDNS option is enabled. A machine-in-the-middle attack can be performed by a malicious machine impersonating a legit server. This issue occurs due to how OpenSSH mishandles error codes in specific conditions when verifying the host key. For an attack to be considered successful, the attacker needs to manage to exhaust the client\u0027s memory resource first, turning the attack complexity high.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.8,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:H/I:H/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2025-26465"
    },
    {
      "cve": "CVE-2025-26466",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the OpenSSH package. For each ping packet the SSH server receives, a pong packet is allocated in a memory buffer and stored in a queue of packages. It is only freed when the server/client key exchange has finished. A malicious client may keep sending such packages, leading to an uncontrolled increase in memory consumption on the server side. Consequently, the server may become unavailable, resulting in a denial of service attack.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2025-26466"
    },
    {
      "cve": "CVE-2025-29087",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite 3.44.0 through 3.49.0 before 3.49.1, the concat_ws() SQL function can cause memory to be written beyond the end of a malloc-allocated buffer. If the separator argument is attacker-controlled and has a large string (e.g., 2MB or more), an integer overflow occurs in calculating the size of the result buffer, and thus malloc may not allocate enough memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.2,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:N/UI:N/S:C/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2025-29087"
    },
    {
      "cve": "CVE-2025-29088",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite 3.49.0 before 3.49.1, certain argument values to sqlite3_db_config (in the C-language API) can cause a denial of service (application crash). An sz*nBig multiplication is not cast to a 64-bit integer, and consequently some memory allocations may be incorrect.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.6,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:N/UI:N/S:C/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2025-29088"
    },
    {
      "cve": "CVE-2025-32728",
      "cwe": {
        "id": "CWE-440",
        "name": "Expected Behavior Violation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In sshd in OpenSSH before 10.0, the DisableForwarding directive does not adhere to the documentation stating that it disables X11 and agent forwarding.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:C/C:N/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2025-32728"
    },
    {
      "cve": "CVE-2025-46836",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "net-tools is a collection of programs that form the base set of the NET-3 networking distribution for the Linux operating system. Inn versions up to and including 2.10, the Linux network utilities (like ifconfig) from the net-tools package do not properly validate the structure of /proc files when showing interfaces. `get_name()` in `interface.c` copies interface labels from `/proc/net/dev` into a fixed 16-byte stack buffer without bounds checking, leading to possible arbitrary code execution or crash. The known attack path does not require privilege but also does not provide privilege escalation in this scenario. A patch is available and expected to be part of version 2.20.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.6,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2025-46836"
    }
  ]
}

{
  "document": {
    "acknowledgments": [
      {
        "organization": "Siemens ProductCERT",
        "summary": "reporting these vulnerabilities to CISA."
      }
    ],
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Disclosure is not limited",
      "tlp": {
        "label": "WHITE",
        "url": "https://us-cert.cisa.gov/tlp/"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "SIMATIC CP 1542SP-1 and CP 1543SP-1 before V2.3 are affected by multiple vulnerabilities in third-party components and the integrated web server.\n\nSiemens has released new versions for the affected products and recommends to update to the latest versions.",
        "title": "Summary"
      },
      {
        "category": "general",
        "text": "As a general security measure, Siemens strongly recommends to protect network access to devices with appropriate mechanisms. In order to operate the devices in a protected IT environment, Siemens recommends to configure the environment according to Siemens\u0027 operational guidelines for Industrial Security (Download: \nhttps://www.siemens.com/cert/operational-guidelines-industrial-security), and to follow the recommendations in the product manuals.\nAdditional information on Industrial Security by Siemens can be found at: https://www.siemens.com/industrialsecurity",
        "title": "General Recommendations"
      },
      {
        "category": "general",
        "text": "For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories",
        "title": "Additional Resources"
      },
      {
        "category": "legal_disclaimer",
        "text": "Siemens Security Advisories are subject to the terms and conditions contained in Siemens\u0027 underlying license terms or other applicable agreements previously agreed to with Siemens (hereinafter \"License Terms\"). To the extent applicable to information, software or documentation made available in or through a Siemens Security Advisory, the Terms of Use of Siemens\u0027 Global Website (https://www.siemens.com/terms_of_use, hereinafter \"Terms of Use\"), in particular Sections 8-10 of the Terms of Use, shall apply additionally. In case of conflicts, the License Terms shall prevail over the Terms of Use.",
        "title": "Terms of Use"
      },
      {
        "category": "legal_disclaimer",
        "text": "All information products included in https://us-cert.cisa.gov/ics are provided \"as is\" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see https://us-cert.cisa.gov/tlp/.",
        "title": "Legal Notice"
      },
      {
        "category": "other",
        "text": "This CISA CSAF advisory was converted from Siemens ProductCERT\u0027s CSAF advisory.",
        "title": "Advisory Conversion Disclaimer"
      },
      {
        "category": "other",
        "text": "Multiple",
        "title": "Critical infrastructure sectors"
      },
      {
        "category": "other",
        "text": "Worldwide",
        "title": "Countries/areas deployed"
      },
      {
        "category": "other",
        "text": "Germany",
        "title": "Company headquarters location"
      },
      {
        "category": "general",
        "text": "CISA recommends users take defensive measures to minimize the exploitation risk of this vulnerability.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Minimize network exposure for all control system devices and/or systems, and ensure they are not accessible from the internet.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Locate control system networks and remote devices behind firewalls and isolate them from business networks.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "When remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most recent version available. Also recognize VPN is only as secure as its connected devices.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets. Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.",
        "title": "Recommended Practices"
      }
    ],
    "publisher": {
      "category": "other",
      "contact_details": "central@cisa.dhs.gov",
      "name": "CISA",
      "namespace": "https://www.cisa.gov/"
    },
    "references": [
      {
        "category": "self",
        "summary": "SSA-625862: Multiple Vulnerabilities in Third-Party Components in SIMATIC CP 1542SP-1 and CP 1543SP-1 before V2.3 - CSAF Version",
        "url": "https://cert-portal.siemens.com/productcert/csaf/ssa-625862.json"
      },
      {
        "category": "self",
        "summary": "SSA-625862: Multiple Vulnerabilities in Third-Party Components in SIMATIC CP 1542SP-1 and CP 1543SP-1 before V2.3 - HTML Version",
        "url": "https://cert-portal.siemens.com/productcert/html/ssa-625862.html"
      },
      {
        "category": "self",
        "summary": "SSA-625862: Multiple Vulnerabilities in Third-Party Components in SIMATIC CP 1542SP-1 and CP 1543SP-1 before V2.3 - PDF Version",
        "url": "https://cert-portal.siemens.com/productcert/pdf/ssa-625862.pdf"
      },
      {
        "category": "self",
        "summary": "SSA-625862: Multiple Vulnerabilities in Third-Party Components in SIMATIC CP 1542SP-1 and CP 1543SP-1 before V2.3 - TXT Version",
        "url": "https://cert-portal.siemens.com/productcert/txt/ssa-625862.txt"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-24-165-10 JSON",
        "url": "https://raw.githubusercontent.com/cisagov/CSAF/develop/csaf_files/OT/white/2024/icsa-24-165-10.json"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-24-165-10 - Web Version",
        "url": "https://www.cisa.gov/news-events/ics-advisories/icsa-24-165-10"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/alerts/ICS-ALERT-10-301-01"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/resources-tools/resources/ics-recommended-practices"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/topics/industrial-control-systems"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/sites/default/files/publications/Cybersecurity_Best_Practices_for_Industrial_Control_Systems.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/tips/ICS-TIP-12-146-01B"
      }
    ],
    "title": "Siemens SIMATIC and SIPLUS",
    "tracking": {
      "current_release_date": "2024-06-11T00:00:00.000000Z",
      "generator": {
        "engine": {
          "name": "CISA CSAF Generator",
          "version": "1.0.0"
        }
      },
      "id": "ICSA-24-165-10",
      "initial_release_date": "2024-06-11T00:00:00.000000Z",
      "revision_history": [
        {
          "date": "2024-06-11T00:00:00.000000Z",
          "legacy_version": "1.0",
          "number": "1",
          "summary": "Publication Date"
        }
      ],
      "status": "final",
      "version": "1"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV2.3",
                "product": {
                  "name": "SIMATIC CP 1542SP-1 (6GK7542-6UX00-0XE0)",
                  "product_id": "CSAFPID-0001",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK7542-6UX00-0XE0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIMATIC CP 1542SP-1 (6GK7542-6UX00-0XE0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV2.3",
                "product": {
                  "name": "SIMATIC CP 1542SP-1 IRC (6GK7542-6VX00-0XE0)",
                  "product_id": "CSAFPID-0002",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK7542-6VX00-0XE0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIMATIC CP 1542SP-1 IRC (6GK7542-6VX00-0XE0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV2.3",
                "product": {
                  "name": "SIMATIC CP 1543SP-1 (6GK7543-6WX00-0XE0)",
                  "product_id": "CSAFPID-0003",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK7543-6WX00-0XE0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIMATIC CP 1543SP-1 (6GK7543-6WX00-0XE0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV2.3",
                "product": {
                  "name": "SIPLUS ET 200SP CP 1542SP-1 IRC TX RAIL (6AG2542-6VX00-4XE0)",
                  "product_id": "CSAFPID-0004",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6AG2542-6VX00-4XE0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIPLUS ET 200SP CP 1542SP-1 IRC TX RAIL (6AG2542-6VX00-4XE0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV2.3",
                "product": {
                  "name": "SIPLUS ET 200SP CP 1543SP-1 ISEC (6AG1543-6WX00-7XE0)",
                  "product_id": "CSAFPID-0005",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6AG1543-6WX00-7XE0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIPLUS ET 200SP CP 1543SP-1 ISEC (6AG1543-6WX00-7XE0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV2.3",
                "product": {
                  "name": "SIPLUS ET 200SP CP 1543SP-1 ISEC TX RAIL (6AG2543-6WX00-4XE0)",
                  "product_id": "CSAFPID-0006",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6AG2543-6WX00-4XE0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIPLUS ET 200SP CP 1543SP-1 ISEC TX RAIL (6AG2543-6WX00-4XE0)"
          }
        ],
        "category": "vendor",
        "name": "Siemens"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2022-2097",
      "cwe": {
        "id": "CWE-326",
        "name": "Inadequate Encryption Strength"
      },
      "notes": [
        {
          "category": "summary",
          "text": "AES OCB mode for 32-bit x86 platforms using the AES-NI assembly optimised implementation will not encrypt the entirety of the data under some circumstances. This could reveal sixteen bytes of data that was preexisting in the memory that wasn\u0027t written. In the special case of \"in place\" encryption, sixteen bytes of the plaintext would be revealed. Since OpenSSL does not support OCB based cipher suites for TLS and DTLS, they are both unaffected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.3 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954475/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ]
        }
      ],
      "title": "CVE-2022-2097"
    },
    {
      "cve": "CVE-2022-3435",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability classified as problematic has been found in Linux Kernel. This affects the function fib_nh_match of the file net/ipv4/fib_semantics.c of the component IPv4 Handler. The manipulation leads to out-of-bounds read. It is possible to initiate the attack remotely. It is recommended to apply a patch to fix this issue. The identifier VDB-210357 was assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.3 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954475/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ]
        }
      ],
      "title": "CVE-2022-3435"
    },
    {
      "cve": "CVE-2022-3545",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability has been found in Linux Kernel and classified as critical. Affected by this vulnerability is the function area_cache_get of the file drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c of the component IPsec. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. The identifier VDB-211045 was assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.3 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954475/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ]
        }
      ],
      "title": "CVE-2022-3545"
    },
    {
      "cve": "CVE-2022-3623",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in Linux Kernel. It has been declared as problematic. Affected by this vulnerability is the function follow_page_pte of the file mm/gup.c of the component BPF. The manipulation leads to race condition. The attack can be launched remotely. It is recommended to apply a patch to fix this issue. The identifier VDB-211921 was assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.3 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954475/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.0,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ]
        }
      ],
      "title": "CVE-2022-3623"
    },
    {
      "cve": "CVE-2022-3643",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Guests can trigger NIC interface reset/abort/crash via netback It is possible for a guest to trigger a NIC interface reset/abort/crash in a Linux based network backend by sending certain kinds of packets. It appears to be an (unwritten?) assumption in the rest of the Linux network stack that packet protocol headers are all contained within the linear section of the SKB and some NICs behave badly if this is not the case. This has been reported to occur with Cisco (enic) and Broadcom NetXtrem II BCM5780 (bnx2x) though it may be an issue with other NICs/drivers as well. In case the frontend is sending requests with split headers, netback will forward those violating above mentioned assumption to the networking core, resulting in said misbehavior.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.3 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954475/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ]
        }
      ],
      "title": "CVE-2022-3643"
    },
    {
      "cve": "CVE-2022-4304",
      "cwe": {
        "id": "CWE-326",
        "name": "Inadequate Encryption Strength"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A timing based side channel exists in the OpenSSL RSA Decryption implementation which could be sufficient to recover a plaintext across a network in a Bleichenbacher style attack. To achieve a successful decryption an attacker would have to be able to send a very large number of trial messages for decryption. The vulnerability affects all RSA padding modes: PKCS#1 v1.5, RSA-OEAP and RSASVE. For example, in a TLS connection, RSA is commonly used by a client to send an encrypted pre-master secret to the server. An attacker that had observed a genuine connection between a client and a server could use this flaw to send trial messages to the server and record the time taken to process them. After a sufficiently large number of messages the attacker could recover the pre-master secret used for the original connection and thus be able to decrypt the application data sent over that connection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.3 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954475/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ]
        }
      ],
      "title": "CVE-2022-4304"
    },
    {
      "cve": "CVE-2022-4450",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The function PEM_read_bio_ex() reads a PEM file from a BIO and parses and decodes the \"name\" (e.g. \"CERTIFICATE\"), any header data and the payload data. If the function succeeds then the \"name_out\", \"header\" and \"data\" arguments are populated with pointers to buffers containing the relevant decoded data. The caller is responsible for freeing those buffers. It is possible to construct a PEM file that results in 0 bytes of payload data. In this case PEM_read_bio_ex() will return a failure code but will populate the header argument with a pointer to a buffer that has already been freed. If the caller also frees this buffer then a double free will occur. This will most likely lead to a crash. This could be exploited by an attacker who has the ability to supply malicious PEM files for parsing to achieve a denial of service attack. The functions PEM_read_bio() and PEM_read() are simple wrappers around PEM_read_bio_ex() and therefore these functions are also directly affected. These functions are also called indirectly by a number of other OpenSSL functions including PEM_X509_INFO_read_bio_ex() and SSL_CTX_use_serverinfo_file() which are also vulnerable. Some OpenSSL internal uses of these functions are not vulnerable because the caller does not free the header argument if PEM_read_bio_ex() returns a failure code. These locations include the PEM_read_bio_TYPE() functions as well as the decoders introduced in OpenSSL 3.0. The OpenSSL asn1parse command line application is also impacted by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.3 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954475/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ]
        }
      ],
      "title": "CVE-2022-4450"
    },
    {
      "cve": "CVE-2022-40303",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.10.3. When parsing a multi-gigabyte XML document with the XML_PARSE_HUGE parser option enabled, several integer counters can overflow. This results in an attempt to access an array at a negative 2GB offset, typically leading to a segmentation fault.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.3 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954475/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ]
        }
      ],
      "title": "CVE-2022-40303"
    },
    {
      "cve": "CVE-2022-40304",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.10.3. Certain invalid XML entity definitions can corrupt a hash table key, potentially leading to subsequent logic errors. In one case, a double-free can be provoked.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.3 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954475/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ]
        }
      ],
      "title": "CVE-2022-40304"
    },
    {
      "cve": "CVE-2022-42328",
      "cwe": {
        "id": "CWE-667",
        "name": "Improper Locking"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Guests can trigger deadlock in Linux netback driver [This CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] The patch for XSA-392 introduced another issue which might result in a deadlock when trying to free the SKB of a packet dropped due to the XSA-392 handling (CVE-2022-42328). Additionally when dropping packages for other reasons the same deadlock could occur in case of netpoll being active for the interface the xen-netback driver is connected to (CVE-2022-42329).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.3 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954475/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ]
        }
      ],
      "title": "CVE-2022-42328"
    },
    {
      "cve": "CVE-2022-42329",
      "cwe": {
        "id": "CWE-667",
        "name": "Improper Locking"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Guests can trigger deadlock in Linux netback drive. The patch for XSA-392 introduced another issue which might result in a deadlock when trying to free the SKB of a packet dropped due to the XSA-392 handling (CVE-2022-42328). Additionally when dropping packages for other reasons the same deadlock could occur in case of netpoll being active for the interface the xen-netback driver is connected to (CVE-2022-42329).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.3 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954475/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ]
        }
      ],
      "title": "CVE-2022-42329"
    },
    {
      "cve": "CVE-2022-44792",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "handle_ipDefaultTTL in agent/mibgroup/ip-mib/ip_scalars.c in Net-SNMP 5.8 through 5.9.3 has a NULL Pointer Exception bug that can be used by a remote attacker (who has write access) to cause the instance to crash via a crafted UDP packet, resulting in Denial of Service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.3 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954475/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ]
        }
      ],
      "title": "CVE-2022-44792"
    },
    {
      "cve": "CVE-2022-44793",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "handle_ipv6IpForwarding in agent/mibgroup/ip-mib/ip_scalars.c in Net-SNMP 5.4.3 through 5.9.3 has a NULL Pointer Exception bug that can be used by a remote attacker to cause the instance to crash via a crafted UDP packet, resulting in Denial of Service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.3 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954475/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ]
        }
      ],
      "title": "CVE-2022-44793"
    },
    {
      "cve": "CVE-2023-0215",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The public API function BIO_new_NDEF is a helper function used for streaming ASN.1 data via a BIO. It is primarily used internally to OpenSSL to support the SMIME, CMS and PKCS7 streaming capabilities, but may also be called directly by end user applications. The function receives a BIO from the caller, prepends a new BIO_f_asn1 filter BIO onto the front of it to form a BIO chain, and then returns the new head of the BIO chain to the caller. Under certain conditions, for example if a CMS recipient public key is invalid, the new filter BIO is freed and the function returns a NULL result indicating a failure. However, in this case, the BIO chain is not properly cleaned up and the BIO passed by the caller still retains internal pointers to the previously freed filter BIO. If the caller then goes on to call BIO_pop() on the BIO then a use-after-free will occur. This will most likely result in a crash. This scenario occurs directly in the internal function B64_write_ASN1() which may cause BIO_new_NDEF() to be called and will subsequently call BIO_pop() on the BIO. This internal function is in turn called by the public API functions PEM_write_bio_ASN1_stream, PEM_write_bio_CMS_stream, PEM_write_bio_PKCS7_stream, SMIME_write_ASN1, SMIME_write_CMS and SMIME_write_PKCS7. Other public API functions that may be impacted by this include i2d_ASN1_bio_stream, BIO_new_CMS, BIO_new_PKCS7, i2d_CMS_bio_stream and i2d_PKCS7_bio_stream. The OpenSSL cms and smime command line applications are similarly affected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.3 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954475/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ]
        }
      ],
      "title": "CVE-2023-0215"
    },
    {
      "cve": "CVE-2023-0286",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a type confusion vulnerability relating to X.400 address processing inside an X.509 GeneralName. X.400 addresses were parsed as an ASN1_STRING but the public structure definition for GENERAL_NAME incorrectly specified the type of the x400Address field as ASN1_TYPE. This field is subsequently interpreted by the OpenSSL function GENERAL_NAME_cmp as an ASN1_TYPE rather than an ASN1_STRING. When CRL checking is enabled (i.e. the application sets the X509_V_FLAG_CRL_CHECK flag), this vulnerability may allow an attacker to pass arbitrary pointers to a memcmp call, enabling them to read memory contents or enact a denial of service. In most cases, the attack requires the attacker to provide both the certificate chain and CRL, neither of which need to have a valid signature. If the attacker only controls one of these inputs, the other input must already contain an X.400 address as a CRL distribution point, which is uncommon. As such, this vulnerability is most likely to only affect applications which have implemented their own functionality for retrieving CRLs over a network.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.3 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954475/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ]
        }
      ],
      "title": "CVE-2023-0286"
    },
    {
      "cve": "CVE-2023-0464",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A security vulnerability has been identified in all supported versions of OpenSSL related to the verification of X.509 certificate chains that include policy constraints. Attackers may be able to exploit this vulnerability by creating a malicious certificate chain that triggers exponential use of computational resources, leading to a denial-of-service (DoS) attack on affected systems.\r\n\r\nPolicy processing is disabled by default but can be enabled by passing the `-policy` argument to the command line utilities or by calling the `X509_VERIFY_PARAM_set1_policies()` function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.3 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954475/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ]
        }
      ],
      "title": "CVE-2023-0464"
    },
    {
      "cve": "CVE-2023-0465",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Applications that use a non-default option when verifying certificates may be\r\nvulnerable to an attack from a malicious CA to circumvent certain checks.\r\n\r\nInvalid certificate policies in leaf certificates are silently ignored by\r\nOpenSSL and other certificate policy checks are skipped for that certificate.\r\nA malicious CA could use this to deliberately assert invalid certificate policies\r\nin order to circumvent policy checking on the certificate altogether.\r\n\r\nPolicy processing is disabled by default but can be enabled by passing\r\nthe `-policy` argument to the command line utilities or by calling the\r\n`X509_VERIFY_PARAM_set1_policies()` function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.3 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954475/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ]
        }
      ],
      "title": "CVE-2023-0465"
    },
    {
      "cve": "CVE-2023-0466",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The function X509_VERIFY_PARAM_add0_policy() is documented to\nimplicitly enable the certificate policy check when doing certificate\nverification. However the implementation of the function does not\nenable the check which allows certificates with invalid or incorrect\npolicies to pass the certificate verification.\n\nAs suddenly enabling the policy check could break existing deployments it was\ndecided to keep the existing behavior of the X509_VERIFY_PARAM_add0_policy()\nfunction.\n\nInstead the applications that require OpenSSL to perform certificate\npolicy check need to use X509_VERIFY_PARAM_set1_policies() or explicitly\nenable the policy check by calling X509_VERIFY_PARAM_set_flags() with\nthe X509_V_FLAG_POLICY_CHECK flag argument.\n\nCertificate policy checks are disabled by default in OpenSSL and are not\ncommonly used by applications.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.3 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954475/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ]
        }
      ],
      "title": "CVE-2023-0466"
    },
    {
      "cve": "CVE-2023-28484",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libxml2 before 2.10.4, parsing of certain invalid XSD schemas can lead to a NULL pointer dereference and subsequently a segfault. This occurs in xmlSchemaFixupComplexType in xmlschemas.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.3 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954475/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ]
        }
      ],
      "title": "CVE-2023-28484"
    },
    {
      "cve": "CVE-2023-29469",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.10.4. When hashing empty dict strings in a crafted XML document, xmlDictComputeFastKey in dict.c can produce non-deterministic values, leading to various logic and memory errors, such as a double free. This behavior occurs because there is an attempt to use the first byte of an empty string, and any value is possible (not solely the \u0027\\0\u0027 value).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.3 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954475/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ]
        }
      ],
      "title": "CVE-2023-29469"
    },
    {
      "cve": "CVE-2023-38380",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The webserver implementation of the affected products does not correctly release allocated memory after it has been used.\r\n\r\nAn attacker with network access could use this vulnerability to cause a denial-of-service condition in the webserver of the affected product.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.3 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954475/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ]
        }
      ],
      "title": "CVE-2023-38380"
    },
    {
      "cve": "CVE-2023-41910",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in lldpd before 1.0.17. By crafting a CDP PDU packet with specific CDP_TLV_ADDRESSES TLVs, a malicious actor can remotely force the lldpd daemon to perform an out-of-bounds read on heap memory. This occurs in cdp_decode in daemon/protocols/cdp.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.3 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954475/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ]
        }
      ],
      "title": "CVE-2023-41910"
    },
    {
      "cve": "CVE-2023-50763",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The web server of affected products, if configured to allow the import of PKCS12 containers, could end up in an infinite loop when processing incomplete certificate chains.\r\n\r\nThis could allow an authenticated remote attacker to create a denial of service condition by importing specially crafted PKCS12 containers.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.3 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954475/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ]
        }
      ],
      "title": "CVE-2023-50763"
    }
  ]
}

{
  "document": {
    "acknowledgments": [
      {
        "organization": "Siemens ProductCERT",
        "summary": "reporting these vulnerabilities to CISA."
      }
    ],
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Disclosure is not limited",
      "tlp": {
        "label": "WHITE",
        "url": "https://us-cert.cisa.gov/tlp/"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "Siemens has released a new version for Telecontrol Server Basic that fixes multiple vulnerabilities.",
        "title": "Summary"
      },
      {
        "category": "general",
        "text": "As a general security measure, Siemens strongly recommends to protect network access to devices with appropriate mechanisms. In order to operate the devices in a protected IT environment, Siemens recommends to configure the environment according to Siemens\u0027 operational guidelines for Industrial Security (Download: \nhttps://www.siemens.com/cert/operational-guidelines-industrial-security), and to follow the recommendations in the product manuals.\nAdditional information on Industrial Security by Siemens can be found at: https://www.siemens.com/industrialsecurity",
        "title": "General Recommendations"
      },
      {
        "category": "general",
        "text": "For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories",
        "title": "Additional Resources"
      },
      {
        "category": "legal_disclaimer",
        "text": "Siemens Security Advisories are subject to the terms and conditions contained in Siemens\u0027 underlying license terms or other applicable agreements previously agreed to with Siemens (hereinafter \"License Terms\"). To the extent applicable to information, software or documentation made available in or through a Siemens Security Advisory, the Terms of Use of Siemens\u0027 Global Website (https://www.siemens.com/terms_of_use, hereinafter \"Terms of Use\"), in particular Sections 8-10 of the Terms of Use, shall apply additionally. In case of conflicts, the License Terms shall prevail over the Terms of Use.",
        "title": "Terms of Use"
      },
      {
        "category": "legal_disclaimer",
        "text": "All information products included in https://us-cert.cisa.gov/ics are provided \"as is\" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see https://us-cert.cisa.gov/tlp/.",
        "title": "Legal Notice"
      },
      {
        "category": "other",
        "text": "This CISA CSAF advisory was converted from Siemens ProductCERT\u0027s CSAF advisory.",
        "title": "Advisory Conversion Disclaimer"
      },
      {
        "category": "other",
        "text": "Multiple",
        "title": "Critical infrastructure sectors"
      },
      {
        "category": "other",
        "text": "Worldwide",
        "title": "Countries/areas deployed"
      },
      {
        "category": "other",
        "text": "Germany",
        "title": "Company headquarters location"
      },
      {
        "category": "general",
        "text": "CISA recommends users take defensive measures to minimize the exploitation risk of this vulnerability.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Minimize network exposure for all control system devices and/or systems, and ensure they are not accessible from the internet.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Locate control system networks and remote devices behind firewalls and isolate them from business networks.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "When remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most recent version available. Also recognize VPN is only as secure as its connected devices.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets. Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.",
        "title": "Recommended Practices"
      }
    ],
    "publisher": {
      "category": "other",
      "contact_details": "central@cisa.dhs.gov",
      "name": "CISA",
      "namespace": "https://www.cisa.gov/"
    },
    "references": [
      {
        "category": "self",
        "summary": "SSA-556635: Multiple Vulnerabilities in Telecontrol Server Basic before V3.1.2.0 - CSAF Version",
        "url": "https://cert-portal.siemens.com/productcert/csaf/ssa-556635.json"
      },
      {
        "category": "self",
        "summary": "SSA-556635: Multiple Vulnerabilities in Telecontrol Server Basic before V3.1.2.0 - HTML Version",
        "url": "https://cert-portal.siemens.com/productcert/html/ssa-556635.html"
      },
      {
        "category": "self",
        "summary": "SSA-556635: Multiple Vulnerabilities in Telecontrol Server Basic before V3.1.2.0 - PDF Version",
        "url": "https://cert-portal.siemens.com/productcert/pdf/ssa-556635.pdf"
      },
      {
        "category": "self",
        "summary": "SSA-556635: Multiple Vulnerabilities in Telecontrol Server Basic before V3.1.2.0 - TXT Version",
        "url": "https://cert-portal.siemens.com/productcert/txt/ssa-556635.txt"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-24-102-08 JSON",
        "url": "https://raw.githubusercontent.com/cisagov/CSAF/develop/csaf_files/OT/white/2024/icsa-24-102-08.json"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-24-102-08 - Web Version",
        "url": "https://www.cisa.gov/news-events/ics-advisories/icsa-24-102-08"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/alerts/ICS-ALERT-10-301-01"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/resources-tools/resources/ics-recommended-practices"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/topics/industrial-control-systems"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/sites/default/files/publications/Cybersecurity_Best_Practices_for_Industrial_Control_Systems.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/tips/ICS-TIP-12-146-01B"
      }
    ],
    "title": "Siemens Telecontrol Server Basic",
    "tracking": {
      "current_release_date": "2024-04-09T00:00:00.000000Z",
      "generator": {
        "engine": {
          "name": "CISA CSAF Generator",
          "version": "1.0.0"
        }
      },
      "id": "ICSA-24-102-08",
      "initial_release_date": "2024-04-09T00:00:00.000000Z",
      "revision_history": [
        {
          "date": "2024-04-09T00:00:00.000000Z",
          "legacy_version": "1.0",
          "number": "1",
          "summary": "Publication Date"
        }
      ],
      "status": "final",
      "version": "1"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV3.1.2",
                "product": {
                  "name": "TeleControl Server Basic V3",
                  "product_id": "CSAFPID-0001"
                }
              }
            ],
            "category": "product_name",
            "name": "TeleControl Server Basic V3"
          }
        ],
        "category": "vendor",
        "name": "Siemens"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2022-4304",
      "cwe": {
        "id": "CWE-326",
        "name": "Inadequate Encryption Strength"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A timing based side channel exists in the OpenSSL RSA Decryption implementation which could be sufficient to recover a plaintext across a network in a Bleichenbacher style attack. To achieve a successful decryption an attacker would have to be able to send a very large number of trial messages for decryption. The vulnerability affects all RSA padding modes: PKCS#1 v1.5, RSA-OEAP and RSASVE. For example, in a TLS connection, RSA is commonly used by a client to send an encrypted pre-master secret to the server. An attacker that had observed a genuine connection between a client and a server could use this flaw to send trial messages to the server and record the time taken to process them. After a sufficiently large number of messages the attacker could recover the pre-master secret used for the original connection and thus be able to decrypt the application data sent over that connection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-4304"
    },
    {
      "cve": "CVE-2022-4450",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The function PEM_read_bio_ex() reads a PEM file from a BIO and parses and decodes the \"name\" (e.g. \"CERTIFICATE\"), any header data and the payload data. If the function succeeds then the \"name_out\", \"header\" and \"data\" arguments are populated with pointers to buffers containing the relevant decoded data. The caller is responsible for freeing those buffers. It is possible to construct a PEM file that results in 0 bytes of payload data. In this case PEM_read_bio_ex() will return a failure code but will populate the header argument with a pointer to a buffer that has already been freed. If the caller also frees this buffer then a double free will occur. This will most likely lead to a crash. This could be exploited by an attacker who has the ability to supply malicious PEM files for parsing to achieve a denial of service attack. The functions PEM_read_bio() and PEM_read() are simple wrappers around PEM_read_bio_ex() and therefore these functions are also directly affected. These functions are also called indirectly by a number of other OpenSSL functions including PEM_X509_INFO_read_bio_ex() and SSL_CTX_use_serverinfo_file() which are also vulnerable. Some OpenSSL internal uses of these functions are not vulnerable because the caller does not free the header argument if PEM_read_bio_ex() returns a failure code. These locations include the PEM_read_bio_TYPE() functions as well as the decoders introduced in OpenSSL 3.0. The OpenSSL asn1parse command line application is also impacted by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-4450"
    },
    {
      "cve": "CVE-2022-40303",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.10.3. When parsing a multi-gigabyte XML document with the XML_PARSE_HUGE parser option enabled, several integer counters can overflow. This results in an attempt to access an array at a negative 2GB offset, typically leading to a segmentation fault.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-40303"
    },
    {
      "cve": "CVE-2022-40304",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.10.3. Certain invalid XML entity definitions can corrupt a hash table key, potentially leading to subsequent logic errors. In one case, a double-free can be provoked.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-40304"
    },
    {
      "cve": "CVE-2022-43513",
      "cwe": {
        "id": "CWE-73",
        "name": "External Control of File Name or Path"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The affected components allow to rename license files with user chosen input without authentication.\r\nThis could allow an unauthenticated remote attacker to rename and move files as SYSTEM user.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.2,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-43513"
    },
    {
      "cve": "CVE-2022-43514",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The affected component does not correctly validate the root path on folder related operations, allowing to modify files and folders outside the intended root directory.\r\nThis could allow an unauthenticated remote attacker to execute file operations of files outside of the specified root folder. Chained with CVE-2022-43513 this could allow Remote Code Execution.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.7,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-43514"
    },
    {
      "cve": "CVE-2022-44725",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "OPC Foundation Local Discovery Server (LDS) in affected products uses a hard-coded file path to a configuration file. This allows a normal user to create a malicious file that is loaded by LDS (running as a high-privilege user).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-44725"
    },
    {
      "cve": "CVE-2022-46908",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite through 3.40.0, when relying on --safe for execution of an untrusted CLI script, does not properly implement the azProhibitedFunctions protection mechanism, and instead allows UDF functions such as WRITEFILE.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.3,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-46908"
    },
    {
      "cve": "CVE-2023-0215",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The public API function BIO_new_NDEF is a helper function used for streaming ASN.1 data via a BIO. It is primarily used internally to OpenSSL to support the SMIME, CMS and PKCS7 streaming capabilities, but may also be called directly by end user applications. The function receives a BIO from the caller, prepends a new BIO_f_asn1 filter BIO onto the front of it to form a BIO chain, and then returns the new head of the BIO chain to the caller. Under certain conditions, for example if a CMS recipient public key is invalid, the new filter BIO is freed and the function returns a NULL result indicating a failure. However, in this case, the BIO chain is not properly cleaned up and the BIO passed by the caller still retains internal pointers to the previously freed filter BIO. If the caller then goes on to call BIO_pop() on the BIO then a use-after-free will occur. This will most likely result in a crash. This scenario occurs directly in the internal function B64_write_ASN1() which may cause BIO_new_NDEF() to be called and will subsequently call BIO_pop() on the BIO. This internal function is in turn called by the public API functions PEM_write_bio_ASN1_stream, PEM_write_bio_CMS_stream, PEM_write_bio_PKCS7_stream, SMIME_write_ASN1, SMIME_write_CMS and SMIME_write_PKCS7. Other public API functions that may be impacted by this include i2d_ASN1_bio_stream, BIO_new_CMS, BIO_new_PKCS7, i2d_CMS_bio_stream and i2d_PKCS7_bio_stream. The OpenSSL cms and smime command line applications are similarly affected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-0215"
    },
    {
      "cve": "CVE-2023-0286",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a type confusion vulnerability relating to X.400 address processing inside an X.509 GeneralName. X.400 addresses were parsed as an ASN1_STRING but the public structure definition for GENERAL_NAME incorrectly specified the type of the x400Address field as ASN1_TYPE. This field is subsequently interpreted by the OpenSSL function GENERAL_NAME_cmp as an ASN1_TYPE rather than an ASN1_STRING. When CRL checking is enabled (i.e. the application sets the X509_V_FLAG_CRL_CHECK flag), this vulnerability may allow an attacker to pass arbitrary pointers to a memcmp call, enabling them to read memory contents or enact a denial of service. In most cases, the attack requires the attacker to provide both the certificate chain and CRL, neither of which need to have a valid signature. If the attacker only controls one of these inputs, the other input must already contain an X.400 address as a CRL distribution point, which is uncommon. As such, this vulnerability is most likely to only affect applications which have implemented their own functionality for retrieving CRLs over a network.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-0286"
    },
    {
      "cve": "CVE-2023-0464",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A security vulnerability has been identified in all supported versions of OpenSSL related to the verification of X.509 certificate chains that include policy constraints. Attackers may be able to exploit this vulnerability by creating a malicious certificate chain that triggers exponential use of computational resources, leading to a denial-of-service (DoS) attack on affected systems.\r\n\r\nPolicy processing is disabled by default but can be enabled by passing the `-policy` argument to the command line utilities or by calling the `X509_VERIFY_PARAM_set1_policies()` function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-0464"
    },
    {
      "cve": "CVE-2023-0465",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Applications that use a non-default option when verifying certificates may be\r\nvulnerable to an attack from a malicious CA to circumvent certain checks.\r\n\r\nInvalid certificate policies in leaf certificates are silently ignored by\r\nOpenSSL and other certificate policy checks are skipped for that certificate.\r\nA malicious CA could use this to deliberately assert invalid certificate policies\r\nin order to circumvent policy checking on the certificate altogether.\r\n\r\nPolicy processing is disabled by default but can be enabled by passing\r\nthe `-policy` argument to the command line utilities or by calling the\r\n`X509_VERIFY_PARAM_set1_policies()` function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-0465"
    },
    {
      "cve": "CVE-2023-0466",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The function X509_VERIFY_PARAM_add0_policy() is documented to\nimplicitly enable the certificate policy check when doing certificate\nverification. However the implementation of the function does not\nenable the check which allows certificates with invalid or incorrect\npolicies to pass the certificate verification.\n\nAs suddenly enabling the policy check could break existing deployments it was\ndecided to keep the existing behavior of the X509_VERIFY_PARAM_add0_policy()\nfunction.\n\nInstead the applications that require OpenSSL to perform certificate\npolicy check need to use X509_VERIFY_PARAM_set1_policies() or explicitly\nenable the policy check by calling X509_VERIFY_PARAM_set_flags() with\nthe X509_V_FLAG_POLICY_CHECK flag argument.\n\nCertificate policy checks are disabled by default in OpenSSL and are not\ncommonly used by applications.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-0466"
    },
    {
      "cve": "CVE-2023-3446",
      "cwe": {
        "id": "CWE-1333",
        "name": "Inefficient Regular Expression Complexity"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. One of those checks confirms that the modulus (\u0027p\u0027 parameter) is not too large. Trying to use a very large modulus is slow and OpenSSL will not normally use a modulus which is over 10,000 bits in length. However the DH_check() function checks numerous aspects of the key or parameters that have been supplied. Some of those checks use the supplied modulus value even if it has already been found to be too large. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulernable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the \u0027-check\u0027 option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-3446"
    },
    {
      "cve": "CVE-2023-4807",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: The POLY1305 MAC (message authentication code) implementation contains a bug that might corrupt the internal state of applications on the Windows 64 platform when running on newer X86_64 processors supporting the AVX512-IFMA instructions. Impact summary: If in an application that uses the OpenSSL library an attacker can influence whether the POLY1305 MAC algorithm is used, the application state might be corrupted with various application dependent consequences. The POLY1305 MAC (message authentication code) implementation in OpenSSL does not save the contents of non-volatile XMM registers on Windows 64 platform when calculating the MAC of data larger than 64 bytes. Before returning to the caller all the XMM registers are set to zero rather than restoring their previous content. The vulnerable code is used only on newer x86_64 processors supporting the AVX512-IFMA instructions. The consequences of this kind of internal application state corruption can be various - from no consequences, if the calling application does not depend on the contents of non-volatile XMM registers at all, to the worst consequences, where the attacker could get complete control of the application process. However given the contents of the registers are just zeroized so the attacker cannot put arbitrary values inside, the most likely consequence, if any, would be an incorrect result of some application dependent calculations or a crash leading to a denial of service. The POLY1305 MAC algorithm is most frequently used as part of the CHACHA20-POLY1305 AEAD (authenticated encryption with associated data) algorithm. The most common usage of this AEAD cipher is with TLS protocol versions 1.2 and 1.3 and a malicious client can influence whether this AEAD cipher is used by the server. This implies that server applications using OpenSSL can be potentially impacted. However we are currently not aware of any concrete application that would be affected by this issue therefore we consider this a Low severity security issue. As a workaround the AVX512-IFMA instructions support can be disabled at runtime by setting the environment variable OPENSSL_ia32cap: OPENSSL_ia32cap=:~0x200000 The FIPS provider is not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-4807"
    },
    {
      "cve": "CVE-2023-5678",
      "cwe": {
        "id": "CWE-754",
        "name": "Improper Check for Unusual or Exceptional Conditions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Generating excessively long X9.42 DH keys or checking excessively long X9.42 DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_generate_key() to generate an X9.42 DH key may experience long delays. Likewise, applications that use DH_check_pub_key(), DH_check_pub_key_ex() or EVP_PKEY_public_check() to check an X9.42 DH key or X9.42 DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. While DH_check() performs all the necessary checks (as of CVE-2023-3817), DH_check_pub_key() doesn\u0027t make any of these checks, and is therefore vulnerable for excessively large P and Q parameters. Likewise, while DH_generate_key() performs a check for an excessively large P, it doesn\u0027t check for an excessively large Q. An application that calls DH_generate_key() or DH_check_pub_key() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. DH_generate_key() and DH_check_pub_key() are also called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_pub_key_ex(), EVP_PKEY_public_check(), and EVP_PKEY_generate(). Also vulnerable are the OpenSSL pkey command line application when using the \"-pubcheck\" option, as well as the OpenSSL genpkey command line application. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-5678"
    },
    {
      "cve": "CVE-2023-21528",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Microsoft SQL Server Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-21528"
    },
    {
      "cve": "CVE-2023-21568",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Microsoft SQL Server Integration Service (VS extension) Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.3,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-21568"
    },
    {
      "cve": "CVE-2023-21704",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Microsoft ODBC Driver for SQL Server Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-21704"
    },
    {
      "cve": "CVE-2023-21705",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Microsoft SQL Server Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-21705"
    },
    {
      "cve": "CVE-2023-21713",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Microsoft SQL Server Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-21713"
    },
    {
      "cve": "CVE-2023-21718",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Microsoft ODBC Driver for SQL Server Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-21718"
    },
    {
      "cve": "CVE-2023-23384",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Microsoft SQL Server Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.3,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-23384"
    },
    {
      "cve": "CVE-2023-28484",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libxml2 before 2.10.4, parsing of certain invalid XSD schemas can lead to a NULL pointer dereference and subsequently a segfault. This occurs in xmlSchemaFixupComplexType in xmlschemas.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-28484"
    },
    {
      "cve": "CVE-2023-29349",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Microsoft ODBC and OLE DB Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-29349"
    },
    {
      "cve": "CVE-2023-29356",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Microsoft ODBC Driver for SQL Server Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-29356"
    },
    {
      "cve": "CVE-2023-29469",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.10.4. When hashing empty dict strings in a crafted XML document, xmlDictComputeFastKey in dict.c can produce non-deterministic values, leading to various logic and memory errors, such as a double free. This behavior occurs because there is an attempt to use the first byte of an empty string, and any value is possible (not solely the \u0027\\0\u0027 value).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-29469"
    },
    {
      "cve": "CVE-2023-32025",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Microsoft ODBC Driver for SQL Server Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-32025"
    },
    {
      "cve": "CVE-2023-32026",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Microsoft ODBC Driver for SQL Server Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-32026"
    },
    {
      "cve": "CVE-2023-32027",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Microsoft ODBC Driver for SQL Server Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-32027"
    },
    {
      "cve": "CVE-2023-32028",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Microsoft SQL OLE DB Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-32028"
    },
    {
      "cve": "CVE-2023-36049",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": ".NET, .NET Framework, and Visual Studio Elevation of Privilege Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.6,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:H/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-36049"
    },
    {
      "cve": "CVE-2023-36417",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Microsoft SQL OLE DB Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-36417"
    },
    {
      "cve": "CVE-2023-36420",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Microsoft ODBC Driver for SQL Server Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-36420"
    },
    {
      "cve": "CVE-2023-36560",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ASP.NET Security Feature Bypass Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-36560"
    },
    {
      "cve": "CVE-2023-36728",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Microsoft SQL Server Denial of Service Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-36728"
    },
    {
      "cve": "CVE-2023-36730",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Microsoft ODBC Driver for SQL Server Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-36730"
    },
    {
      "cve": "CVE-2023-36785",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Microsoft ODBC Driver for SQL Server Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-36785"
    },
    {
      "cve": "CVE-2023-36788",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": ".NET Framework Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-36788"
    },
    {
      "cve": "CVE-2023-36792",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Visual Studio Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-36792"
    },
    {
      "cve": "CVE-2023-36793",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Visual Studio Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-36793"
    },
    {
      "cve": "CVE-2023-36794",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Visual Studio Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-36794"
    },
    {
      "cve": "CVE-2023-36796",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Visual Studio Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-36796"
    },
    {
      "cve": "CVE-2023-36873",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": ".NET Framework Spoofing Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-36873"
    },
    {
      "cve": "CVE-2023-36899",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ASP.NET Elevation of Privilege Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-36899"
    },
    {
      "cve": "CVE-2023-38169",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Microsoft SQL OLE DB Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-38169"
    },
    {
      "cve": "CVE-2023-39615",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Xmlsoft Libxml2 v2.11.0 was discovered to contain an out-of-bounds read via the xmlSAX2StartElement() function at /libxml2/SAX2.c. This vulnerability allows attackers to cause a Denial of Service (DoS) via supplying a crafted XML file. NOTE: the vendor\u0027s position is that the product does not support the legacy SAX1 interface with custom callbacks; there is a crash even without crafted input.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-39615"
    }
  ]
}

{
  "document": {
    "acknowledgments": [
      {
        "organization": "Siemens",
        "summary": "reporting these vulnerabilities to CISA."
      }
    ],
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Disclosure is not limited",
      "tlp": {
        "label": "WHITE",
        "url": "https://us-cert.cisa.gov/tlp/"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "SCALANCE W-700 IEEE 802.11ax family devices are affected by multiple vulnerabilities.\n\nSiemens has released new versions for the affected products and recommends to update to the latest versions.",
        "title": "Summary"
      },
      {
        "category": "general",
        "text": "As a general security measure, Siemens strongly recommends to protect network access to devices with appropriate mechanisms. In order to operate the devices in a protected IT environment, Siemens recommends to configure the environment according to Siemens\u0027 operational guidelines for Industrial Security (Download: \nhttps://www.siemens.com/cert/operational-guidelines-industrial-security), and to follow the recommendations in the product manuals.\nAdditional information on Industrial Security by Siemens can be found at: https://www.siemens.com/industrialsecurity",
        "title": "General Recommendations"
      },
      {
        "category": "general",
        "text": "For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories",
        "title": "Additional Resources"
      },
      {
        "category": "legal_disclaimer",
        "text": "The use of Siemens Security Advisories is subject to the terms and conditions listed on: https://www.siemens.com/productcert/terms-of-use.",
        "title": "Terms of Use"
      },
      {
        "category": "legal_disclaimer",
        "text": "All information products included in https://us-cert.cisa.gov/ics are provided \"as is\" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see https://us-cert.cisa.gov/tlp/.",
        "title": "Legal Notice"
      },
      {
        "category": "other",
        "text": "This CISA CSAF advisory was converted from Siemens ProductCERT\u0027s CSAF advisory.",
        "title": "Advisory Conversion Disclaimer"
      },
      {
        "category": "other",
        "text": "Chemical, Critical Manufacturing, Energy, Food and Agriculture, Water and Wastewater Systems",
        "title": "Critical infrastructure sectors"
      },
      {
        "category": "other",
        "text": "Worldwide",
        "title": "Countries/areas deployed"
      },
      {
        "category": "other",
        "text": "Germany",
        "title": "Company headquarters location"
      },
      {
        "category": "general",
        "text": "CISA recommends users take defensive measures to minimize the exploitation risk of this vulnerability.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Minimize network exposure for all control system devices and/or systems, and ensure they are not accessible from the internet.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Locate control system networks and remote devices behind firewalls and isolate them from business networks.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "When remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most recent version available. Also recognize VPN is only as secure as its connected devices.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets. Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.",
        "title": "Recommended Practices"
      }
    ],
    "publisher": {
      "category": "other",
      "contact_details": "central@cisa.dhs.gov",
      "name": "CISA",
      "namespace": "https://www.cisa.gov/"
    },
    "references": [
      {
        "category": "self",
        "summary": "SSA-769027: Multiple Vulnerabilities fixed in SCALANCE W700 IEEE 802.11ax devices before V3.0.0 - CSAF Version",
        "url": "https://cert-portal.siemens.com/productcert/csaf/ssa-769027.json"
      },
      {
        "category": "self",
        "summary": "SSA-769027: Multiple Vulnerabilities fixed in SCALANCE W700 IEEE 802.11ax devices before V3.0.0 - HTML Version",
        "url": "https://cert-portal.siemens.com/productcert/html/ssa-769027.html"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-25-044-09 JSON",
        "url": "https://raw.githubusercontent.com/cisagov/CSAF/develop/csaf_files/OT/white/2025/icsa-25-044-09.json"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-25-044-09 - Web Version",
        "url": "https://www.cisa.gov/news-events/ics-advisories/icsa-25-044-09"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/alerts/ICS-ALERT-10-301-01"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/resources-tools/resources/ics-recommended-practices"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/topics/industrial-control-systems"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/sites/default/files/publications/Cybersecurity_Best_Practices_for_Industrial_Control_Systems.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/tips/ICS-TIP-12-146-01B"
      }
    ],
    "title": "Siemens SCALANCE W700 IEEE 802.11ax",
    "tracking": {
      "current_release_date": "2025-05-06T06:00:00.000000Z",
      "generator": {
        "engine": {
          "name": "CISA CSAF Generator",
          "version": "1.0.0"
        }
      },
      "id": "ICSA-25-044-09",
      "initial_release_date": "2025-02-11T00:00:00.000000Z",
      "revision_history": [
        {
          "date": "2025-02-11T00:00:00.000000Z",
          "legacy_version": "1.0",
          "number": "1",
          "summary": "Publication Date"
        },
        {
          "date": "2025-05-06T06:00:00.000000Z",
          "legacy_version": "Revision",
          "number": "2",
          "summary": "Revision - Fixing typos"
        }
      ],
      "status": "final",
      "version": "2"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV3.0.0",
                "product": {
                  "name": "SCALANCE WAB762-1 (6GK5762-1AJ00-6AA0)",
                  "product_id": "CSAFPID-0001",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5762-1AJ00-6AA0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE WAB762-1 (6GK5762-1AJ00-6AA0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV3.0.0",
                "product": {
                  "name": "SCALANCE WAM763-1 (6GK5763-1AL00-7DA0)",
                  "product_id": "CSAFPID-0002",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5763-1AL00-7DA0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE WAM763-1 (6GK5763-1AL00-7DA0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV3.0.0",
                "product": {
                  "name": "SCALANCE WAM763-1 (ME) (6GK5763-1AL00-7DC0)",
                  "product_id": "CSAFPID-0003",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5763-1AL00-7DC0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE WAM763-1 (ME) (6GK5763-1AL00-7DC0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV3.0.0",
                "product": {
                  "name": "SCALANCE WAM763-1 (US) (6GK5763-1AL00-7DB0)",
                  "product_id": "CSAFPID-0004",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5763-1AL00-7DB0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE WAM763-1 (US) (6GK5763-1AL00-7DB0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV3.0.0",
                "product": {
                  "name": "SCALANCE WAM766-1 (6GK5766-1GE00-7DA0)",
                  "product_id": "CSAFPID-0005",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5766-1GE00-7DA0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE WAM766-1 (6GK5766-1GE00-7DA0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV3.0.0",
                "product": {
                  "name": "SCALANCE WAM766-1 (ME) (6GK5766-1GE00-7DC0)",
                  "product_id": "CSAFPID-0006",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5766-1GE00-7DC0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE WAM766-1 (ME) (6GK5766-1GE00-7DC0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV3.0.0",
                "product": {
                  "name": "SCALANCE WAM766-1 (US) (6GK5766-1GE00-7DB0)",
                  "product_id": "CSAFPID-0007",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5766-1GE00-7DB0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE WAM766-1 (US) (6GK5766-1GE00-7DB0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV3.0.0",
                "product": {
                  "name": "SCALANCE WAM766-1 EEC (6GK5766-1GE00-7TA0)",
                  "product_id": "CSAFPID-0008",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5766-1GE00-7TA0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE WAM766-1 EEC (6GK5766-1GE00-7TA0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV3.0.0",
                "product": {
                  "name": "SCALANCE WAM766-1 EEC (ME) (6GK5766-1GE00-7TC0)",
                  "product_id": "CSAFPID-0009",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5766-1GE00-7TC0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE WAM766-1 EEC (ME) (6GK5766-1GE00-7TC0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV3.0.0",
                "product": {
                  "name": "SCALANCE WAM766-1 EEC (US) (6GK5766-1GE00-7TB0)",
                  "product_id": "CSAFPID-0010",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5766-1GE00-7TB0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE WAM766-1 EEC (US) (6GK5766-1GE00-7TB0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV3.0.0",
                "product": {
                  "name": "SCALANCE WUB762-1 (6GK5762-1AJ00-1AA0)",
                  "product_id": "CSAFPID-0011",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5762-1AJ00-1AA0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE WUB762-1 (6GK5762-1AJ00-1AA0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV3.0.0",
                "product": {
                  "name": "SCALANCE WUB762-1 iFeatures (6GK5762-1AJ00-2AA0)",
                  "product_id": "CSAFPID-0012",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5762-1AJ00-2AA0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE WUB762-1 iFeatures (6GK5762-1AJ00-2AA0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV3.0.0",
                "product": {
                  "name": "SCALANCE WUM763-1 (6GK5763-1AL00-3AA0)",
                  "product_id": "CSAFPID-0013",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5763-1AL00-3AA0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE WUM763-1 (6GK5763-1AL00-3AA0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV3.0.0",
                "product": {
                  "name": "SCALANCE WUM763-1 (6GK5763-1AL00-3DA0)",
                  "product_id": "CSAFPID-0014",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5763-1AL00-3DA0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE WUM763-1 (6GK5763-1AL00-3DA0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV3.0.0",
                "product": {
                  "name": "SCALANCE WUM763-1 (US) (6GK5763-1AL00-3AB0)",
                  "product_id": "CSAFPID-0015",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5763-1AL00-3AB0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE WUM763-1 (US) (6GK5763-1AL00-3AB0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV3.0.0",
                "product": {
                  "name": "SCALANCE WUM763-1 (US) (6GK5763-1AL00-3DB0)",
                  "product_id": "CSAFPID-0016",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5763-1AL00-3DB0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE WUM763-1 (US) (6GK5763-1AL00-3DB0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV3.0.0",
                "product": {
                  "name": "SCALANCE WUM766-1 (6GK5766-1GE00-3DA0)",
                  "product_id": "CSAFPID-0017",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5766-1GE00-3DA0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE WUM766-1 (6GK5766-1GE00-3DA0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV3.0.0",
                "product": {
                  "name": "SCALANCE WUM766-1 (ME) (6GK5766-1GE00-3DC0)",
                  "product_id": "CSAFPID-0018",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5766-1GE00-3DC0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE WUM766-1 (ME) (6GK5766-1GE00-3DC0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV3.0.0",
                "product": {
                  "name": "SCALANCE WUM766-1 (USA) (6GK5766-1GE00-3DB0)",
                  "product_id": "CSAFPID-0019",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5766-1GE00-3DB0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE WUM766-1 (USA) (6GK5766-1GE00-3DB0)"
          }
        ],
        "category": "vendor",
        "name": "Siemens"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2022-2588",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Zhenpeng Lin discovered that the network packet scheduler implementation in the Linux kernel did not properly remove all references to a route filter before freeing it in some situations. A local attacker could use this to cause a denial of service (system crash) or execute arbitrary code.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2022-2588"
    },
    {
      "cve": "CVE-2022-2663",
      "cwe": {
        "id": "CWE-923",
        "name": "Improper Restriction of Communication Channel to Intended Endpoints"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was found in the Linux kernel in nf_conntrack_irc where the message handling can be confused and incorrectly matches the message. A firewall may be able to be bypassed when users are using unencrypted IRC with nf_conntrack_irc configured.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2022-2663"
    },
    {
      "cve": "CVE-2022-3524",
      "cwe": {
        "id": "CWE-404",
        "name": "Improper Resource Shutdown or Release"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in Linux Kernel. It has been declared as problematic. Affected by this vulnerability is the function ipv6_renew_options of the component IPv6 Handler. The manipulation leads to memory leak. The attack can be launched remotely. It is recommended to apply a patch to fix this issue. The identifier VDB-211021 was assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2022-3524"
    },
    {
      "cve": "CVE-2022-4304",
      "cwe": {
        "id": "CWE-326",
        "name": "Inadequate Encryption Strength"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A timing based side channel exists in the OpenSSL RSA Decryption implementation which could be sufficient to recover a plaintext across a network in a Bleichenbacher style attack. To achieve a successful decryption an attacker would have to be able to send a very large number of trial messages for decryption. The vulnerability affects all RSA padding modes: PKCS#1 v1.5, RSA-OEAP and RSASVE. For example, in a TLS connection, RSA is commonly used by a client to send an encrypted pre-master secret to the server. An attacker that had observed a genuine connection between a client and a server could use this flaw to send trial messages to the server and record the time taken to process them. After a sufficiently large number of messages the attacker could recover the pre-master secret used for the original connection and thus be able to decrypt the application data sent over that connection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2022-4304"
    },
    {
      "cve": "CVE-2022-4450",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The function PEM_read_bio_ex() reads a PEM file from a BIO and parses and decodes the \"name\" (e.g. \"CERTIFICATE\"), any header data and the payload data. If the function succeeds then the \"name_out\", \"header\" and \"data\" arguments are populated with pointers to buffers containing the relevant decoded data. The caller is responsible for freeing those buffers. It is possible to construct a PEM file that results in 0 bytes of payload data. In this case PEM_read_bio_ex() will return a failure code but will populate the header argument with a pointer to a buffer that has already been freed. If the caller also frees this buffer then a double free will occur. This will most likely lead to a crash. This could be exploited by an attacker who has the ability to supply malicious PEM files for parsing to achieve a denial of service attack. The functions PEM_read_bio() and PEM_read() are simple wrappers around PEM_read_bio_ex() and therefore these functions are also directly affected. These functions are also called indirectly by a number of other OpenSSL functions including PEM_X509_INFO_read_bio_ex() and SSL_CTX_use_serverinfo_file() which are also vulnerable. Some OpenSSL internal uses of these functions are not vulnerable because the caller does not free the header argument if PEM_read_bio_ex() returns a failure code. These locations include the PEM_read_bio_TYPE() functions as well as the decoders introduced in OpenSSL 3.0. The OpenSSL asn1parse command line application is also impacted by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2022-4450"
    },
    {
      "cve": "CVE-2022-39188",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in include/asm-generic/tlb.h in the Linux kernel before 5.19. Because of a race condition (unmap_mapping_range versus munmap), a device driver can free a page while it still has stale TLB entries. This only occurs in situations with VM_PFNMAP VMAs.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2022-39188"
    },
    {
      "cve": "CVE-2022-39842",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel before 5.19. In pxa3xx_gcu_write in drivers/video/fbdev/pxa3xx-gcu.c, the count parameter has a type conflict of size_t versus int, causing an integer overflow and bypassing the size check. After that, because it is used as the third argument to copy_from_user(), a heap overflow may occur. NOTE: the original discoverer disputes that the overflow can actually happen.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:L/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2022-39842"
    },
    {
      "cve": "CVE-2022-40303",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.10.3. When parsing a multi-gigabyte XML document with the XML_PARSE_HUGE parser option enabled, several integer counters can overflow. This results in an attempt to access an array at a negative 2GB offset, typically leading to a segmentation fault.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2022-40303"
    },
    {
      "cve": "CVE-2022-40304",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.10.3. Certain invalid XML entity definitions can corrupt a hash table key, potentially leading to subsequent logic errors. In one case, a double-free can be provoked.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2022-40304"
    },
    {
      "cve": "CVE-2022-43750",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "drivers/usb/mon/mon_bin.c in usbmon in the Linux kernel before 5.19.15 and 6.x before 6.0.1 allows a user-space client to corrupt the monitor\u0027s internal memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2022-43750"
    },
    {
      "cve": "CVE-2022-47069",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "p7zip 16.02 was discovered to contain a heap-buffer-overflow vulnerability via the function NArchive::NZip::CInArchive::FindCd(bool) at CPP/7zip/Archive/Zip/ZipIn.cpp.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2022-47069"
    },
    {
      "cve": "CVE-2022-47929",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel before 6.1.6, a NULL pointer dereference bug in the traffic control subsystem allows an unprivileged user to trigger a denial of service (system crash) via a crafted traffic control configuration that is set up with \"tc qdisc\" and \"tc class\" commands. This affects qdisc_graft in net/sched/sch_api.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2022-47929"
    },
    {
      "cve": "CVE-2023-0045",
      "cwe": {
        "id": "CWE-610",
        "name": "Externally Controlled Reference to a Resource in Another Sphere"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The current implementation of the prctl syscall does not issue an IBPB immediately during the syscall. The ib_prctl_set \u00a0function updates the Thread Information Flags (TIFs) for the task and updates the SPEC_CTRL MSR on the function __speculation_ctrl_update, but the IBPB is only issued on the next schedule, when the TIF bits are checked. This leaves the victim vulnerable to values already injected on the BTB, prior to the prctl syscall. \u00a0The patch that added the support for the conditional mitigation via prctl (ib_prctl_set) dates back to the kernel 4.9.176.\n\nWe recommend upgrading past commit\u00a0a664ec9158eeddd75121d39c9a0758016097fa96",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2023-0045"
    },
    {
      "cve": "CVE-2023-0215",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The public API function BIO_new_NDEF is a helper function used for streaming ASN.1 data via a BIO. It is primarily used internally to OpenSSL to support the SMIME, CMS and PKCS7 streaming capabilities, but may also be called directly by end user applications. The function receives a BIO from the caller, prepends a new BIO_f_asn1 filter BIO onto the front of it to form a BIO chain, and then returns the new head of the BIO chain to the caller. Under certain conditions, for example if a CMS recipient public key is invalid, the new filter BIO is freed and the function returns a NULL result indicating a failure. However, in this case, the BIO chain is not properly cleaned up and the BIO passed by the caller still retains internal pointers to the previously freed filter BIO. If the caller then goes on to call BIO_pop() on the BIO then a use-after-free will occur. This will most likely result in a crash. This scenario occurs directly in the internal function B64_write_ASN1() which may cause BIO_new_NDEF() to be called and will subsequently call BIO_pop() on the BIO. This internal function is in turn called by the public API functions PEM_write_bio_ASN1_stream, PEM_write_bio_CMS_stream, PEM_write_bio_PKCS7_stream, SMIME_write_ASN1, SMIME_write_CMS and SMIME_write_PKCS7. Other public API functions that may be impacted by this include i2d_ASN1_bio_stream, BIO_new_CMS, BIO_new_PKCS7, i2d_CMS_bio_stream and i2d_PKCS7_bio_stream. The OpenSSL cms and smime command line applications are similarly affected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2023-0215"
    },
    {
      "cve": "CVE-2023-0286",
      "cwe": {
        "id": "CWE-843",
        "name": "Access of Resource Using Incompatible Type (\u0027Type Confusion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a type confusion vulnerability relating to X.400 address processing inside an X.509 GeneralName. X.400 addresses were parsed as an ASN1_STRING but the public structure definition for GENERAL_NAME incorrectly specified the type of the x400Address field as ASN1_TYPE. This field is subsequently interpreted by the OpenSSL function GENERAL_NAME_cmp as an ASN1_TYPE rather than an ASN1_STRING. When CRL checking is enabled (i.e. the application sets the X509_V_FLAG_CRL_CHECK flag), this vulnerability may allow an attacker to pass arbitrary pointers to a memcmp call, enabling them to read memory contents or enact a denial of service. In most cases, the attack requires the attacker to provide both the certificate chain and CRL, neither of which need to have a valid signature. If the attacker only controls one of these inputs, the other input must already contain an X.400 address as a CRL distribution point, which is uncommon. As such, this vulnerability is most likely to only affect applications which have implemented their own functionality for retrieving CRLs over a network.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2023-0286"
    },
    {
      "cve": "CVE-2023-0464",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A security vulnerability has been identified in all supported versions of OpenSSL related to the verification of X.509 certificate chains that include policy constraints. Attackers may be able to exploit this vulnerability by creating a malicious certificate chain that triggers exponential use of computational resources, leading to a denial-of-service (DoS) attack on affected systems.\r\n\r\nPolicy processing is disabled by default but can be enabled by passing the `-policy` argument to the command line utilities or by calling the `X509_VERIFY_PARAM_set1_policies()` function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2023-0464"
    },
    {
      "cve": "CVE-2023-0465",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Applications that use a non-default option when verifying certificates may be\r\nvulnerable to an attack from a malicious CA to circumvent certain checks.\r\n\r\nInvalid certificate policies in leaf certificates are silently ignored by\r\nOpenSSL and other certificate policy checks are skipped for that certificate.\r\nA malicious CA could use this to deliberately assert invalid certificate policies\r\nin order to circumvent policy checking on the certificate altogether.\r\n\r\nPolicy processing is disabled by default but can be enabled by passing\r\nthe `-policy` argument to the command line utilities or by calling the\r\n`X509_VERIFY_PARAM_set1_policies()` function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2023-0465"
    },
    {
      "cve": "CVE-2023-0466",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The function X509_VERIFY_PARAM_add0_policy() is documented to\r\nimplicitly enable the certificate policy check when doing certificate\r\nverification. However the implementation of the function does not\r\nenable the check which allows certificates with invalid or incorrect\r\npolicies to pass the certificate verification.\r\n\r\nAs suddenly enabling the policy check could break existing deployments it was\r\ndecided to keep the existing behavior of the X509_VERIFY_PARAM_add0_policy()\r\nfunction.\r\n\r\nInstead the applications that require OpenSSL to perform certificate\r\npolicy check need to use X509_VERIFY_PARAM_set1_policies() or explicitly\r\nenable the policy check by calling X509_VERIFY_PARAM_set_flags() with\r\nthe X509_V_FLAG_POLICY_CHECK flag argument.\r\n\r\nCertificate policy checks are disabled by default in OpenSSL and are not\r\ncommonly used by applications.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2023-0466"
    },
    {
      "cve": "CVE-2023-0590",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free flaw was found in qdisc_graft in net/sched/sch_api.c in the Linux Kernel due to a race problem. This flaw leads to a denial of service issue. If patch ebda44da44f6 (\"net: sched: fix race condition in qdisc_graft()\") not applied yet, then kernel could be affected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2023-0590"
    },
    {
      "cve": "CVE-2023-1073",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A memory corruption flaw was found in the Linux kernel\u2019s human interface device (HID) subsystem in how a user inserts a malicious USB device. This flaw allows a local user to crash or potentially escalate their privileges on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.6,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:P/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2023-1073"
    },
    {
      "cve": "CVE-2023-1074",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A memory leak flaw was found in the Linux kernel\u0027s Stream Control Transmission Protocol. This issue may occur when a user starts a malicious networking service and someone connects to this service. This could allow a local user to starve resources, causing a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2023-1074"
    },
    {
      "cve": "CVE-2023-1118",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw use after free in the Linux kernel integrated infrared receiver/transceiver driver was found in the way user detaching rc device. A local user could use this flaw to crash the system or potentially escalate their privileges on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2023-1118"
    },
    {
      "cve": "CVE-2023-1206",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A hash collision flaw was found in the IPv6 connection lookup table in the Linux kernel\u2019s IPv6 functionality when a user makes a new kind of SYN flood attack. A user located in the local network or with a high bandwidth connection can increase the CPU usage of the server that accepts IPV6 connections up to 95%.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2023-1206"
    },
    {
      "cve": "CVE-2023-1380",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A slab-out-of-bound read problem was found in brcmf_get_assoc_ies in drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c in the Linux Kernel. This issue could occur when assoc_info-\u003ereq_len data is bigger than the size of the buffer, defined as WL_EXTRA_BUF_MAX, leading to a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2023-1380"
    },
    {
      "cve": "CVE-2023-1670",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw use after free in the Linux kernel Xircom 16-bit PCMCIA (PC-card) Ethernet driver was found.A local user could use this flaw to crash the system or potentially escalate their privileges on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2023-1670"
    },
    {
      "cve": "CVE-2023-2194",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds write vulnerability was found in the Linux kernel\u0027s SLIMpro I2C device driver. The userspace \"data-\u003eblock[0]\" variable was not capped to a number between 0-255 and was used as the size of a memcpy, possibly writing beyond the end of dma_buffer. This flaw could allow a local privileged user to crash the system or potentially achieve code execution.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2023-2194"
    },
    {
      "cve": "CVE-2023-3446",
      "cwe": {
        "id": "CWE-1333",
        "name": "Inefficient Regular Expression Complexity"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Checking excessively long DH keys or parameters may be very slow. Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. One of those checks confirms that the modulus (\u0027p\u0027 parameter) is not too large. Trying to use a very large modulus is slow and OpenSSL will not normally use a modulus which is over 10,000 bits in length. However the DH_check() function checks numerous aspects of the key or parameters that have been supplied. Some of those checks use the supplied modulus value even if it has already been found to be too large. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulernable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the \u0027-check\u0027 option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2023-3446"
    },
    {
      "cve": "CVE-2023-3611",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds write vulnerability in the Linux kernel\u0027s net/sched: sch_qfq component can be exploited to achieve local privilege escalation.\r\n\r\nThe qfq_change_agg() function in net/sched/sch_qfq.c allows an out-of-bounds write because lmax is updated according to packet sizes without bounds checks.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2023-3611"
    },
    {
      "cve": "CVE-2023-4623",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s net/sched: sch_hfsc (HFSC qdisc traffic control) component can be exploited to achieve local privilege escalation.\n\nIf a class with a link-sharing curve (i.e. with the HFSC_FSC flag set) has a parent without a link-sharing curve, then init_vf() will call vttree_insert() on the parent, but vttree_remove() will be skipped in update_vf(). This leaves a dangling pointer that can cause a use-after-free.\n\nWe recommend upgrading past commit b3d26c5702c7d6c45456326e56d2ccf3f103e60f.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2023-4623"
    },
    {
      "cve": "CVE-2023-4921",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s net/sched: sch_qfq component can be exploited to achieve local privilege escalation.\n\nWhen the plug qdisc is used as a class of the qfq qdisc, sending network packets triggers use-after-free in qfq_dequeue() due to the incorrect .peek handler of sch_plug and lack of error checking in agg_dequeue().\n\nWe recommend upgrading past commit 8fc134fee27f2263988ae38920bc03da416b03d8.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2023-4921"
    },
    {
      "cve": "CVE-2023-5363",
      "cwe": {
        "id": "CWE-684",
        "name": "Incorrect Provision of Specified Functionality"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A bug has been identified in the processing of key and initialisation vector (IV) lengths.  This can lead to potential truncation or overruns during the initialisation of some symmetric ciphers. A truncation in the IV can result in non-uniqueness, which could result in loss of confidentiality for some cipher modes.\r\n\r\nWhen calling EVP_EncryptInit_ex2(), EVP_DecryptInit_ex2() or EVP_CipherInit_ex2() the provided OSSL_PARAM array is processed after the key and IV have been established.  Any alterations to the key length, via the \"keylen\" parameter or the IV length, via the \"ivlen\" parameter, within the OSSL_PARAM array will not take effect as intended, potentially causing truncation or overreading of these values.  The following ciphers and cipher modes are impacted: RC2, RC4, RC5, CCM, GCM and OCB.\r\n\r\nFor the CCM, GCM and OCB cipher modes, truncation of the IV can result in loss of confidentiality.  For example, when following NIST\u0027s SP 800-38D section 8.2.1 guidance for constructing a deterministic IV for AES in GCM mode, truncation of the counter portion could lead to IV reuse.\r\n\r\nBoth truncations and overruns of the key and overruns of the IV will produce incorrect results and could, in some cases, trigger a memory exception.  However, these issues are not currently assessed as security critical.\r\n\r\nChanging the key and/or IV lengths is not considered to be a common operation and the vulnerable API was recently introduced. Furthermore it is likely that application developers will have spotted this problem during testing since decryption would fail unless both peers in the communication were similarly vulnerable. For these reasons we expect the probability of an application being vulnerable to this to be quite low. However if an application is  vulnerable then this issue is considered very serious. For these reasons we have assessed this issue as Moderate severity overall.\r\n\r\nThe OpenSSL SSL/TLS implementation is not affected by this issue.\r\n\r\nThe OpenSSL 3.0 and 3.1 FIPS providers are not affected by this because the issue lies outside of the FIPS provider boundary.\r\n\r\nOpenSSL 3.1 and 3.0 are vulnerable to this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2023-5363"
    },
    {
      "cve": "CVE-2023-5678",
      "cwe": {
        "id": "CWE-754",
        "name": "Improper Check for Unusual or Exceptional Conditions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Generating excessively long X9.42 DH keys or checking excessively long X9.42 DH keys or parameters may be very slow. Applications that use the functions DH_generate_key() to generate an X9.42 DH key may experience long delays. Likewise, applications that use DH_check_pub_key(), DH_check_pub_key_ex() or EVP_PKEY_public_check() to check an X9.42 DH key or X9.42 DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. While DH_check() performs all the necessary checks (as of CVE-2023-3817), DH_check_pub_key() doesn\u0027t make any of these checks, and is therefore vulnerable for excessively large P and Q parameters. Likewise, while DH_generate_key() performs a check for an excessively large P, it doesn\u0027t check for an excessively large Q. An application that calls DH_generate_key() or DH_check_pub_key() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. DH_generate_key() and DH_check_pub_key() are also called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_pub_key_ex(), EVP_PKEY_public_check(), and EVP_PKEY_generate(). Also vulnerable are the OpenSSL pkey command line application when using the \"-pubcheck\" option, as well as the OpenSSL genpkey command line application. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2023-5678"
    },
    {
      "cve": "CVE-2023-5717",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A heap out-of-bounds write vulnerability in the Linux kernel\u0027s Linux Kernel Performance Events (perf) component can be exploited to achieve local privilege escalation.\r\n\r\nIf perf_read_group() is called while an event\u0027s sibling_list is smaller than its child\u0027s sibling_list, it can increment or write to memory locations outside of the allocated buffer.\r\n\r\nWe recommend upgrading past commit 32671e3799ca2e4590773fd0e63aaa4229e50c06.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2023-5717"
    },
    {
      "cve": "CVE-2023-6129",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The POLY1305 MAC (message authentication code) implementation\r\ncontains a bug that might corrupt the internal state of applications running\r\non PowerPC CPU based platforms if the CPU provides vector instructions.\r\n\r\nIf an attacker can influence whether the POLY1305 MAC\r\nalgorithm is used, the application state might be corrupted with various\r\napplication dependent consequences.\r\n\r\nThe POLY1305 MAC (message authentication code) implementation in OpenSSL for\r\nPowerPC CPUs restores the contents of vector registers in a different order\r\nthan they are saved. Thus the contents of some of these vector registers\r\nare corrupted when returning to the caller. The vulnerable code is used only\r\non newer PowerPC processors supporting the PowerISA 2.07 instructions.\r\n\r\nThe consequences of this kind of internal application state corruption can\r\nbe various - from no consequences, if the calling application does not\r\ndepend on the contents of non-volatile XMM registers at all, to the worst\r\nconsequences, where the attacker could get complete control of the application\r\nprocess. However unless the compiler uses the vector registers for storing\r\npointers, the most likely consequence, if any, would be an incorrect result\r\nof some application dependent calculations or a crash leading to a denial of\r\nservice.\r\n\r\nThe POLY1305 MAC algorithm is most frequently used as part of the\r\nCHACHA20-POLY1305 AEAD (authenticated encryption with associated data)\r\nalgorithm. The most common usage of this AEAD cipher is with TLS protocol\r\nversions 1.2 and 1.3. If this cipher is enabled on the server a malicious\r\nclient can influence whether this AEAD cipher is used. This implies that\r\nTLS server applications using OpenSSL can be potentially impacted. However\r\nwe are currently not aware of any concrete application that would be affected\r\nby this issue therefore we consider this a Low severity security issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2023-6129"
    },
    {
      "cve": "CVE-2023-6237",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Checking excessively long invalid RSA public keys may take a long time. Applications that use the function EVP_PKEY_public_check() to check RSA public keys may experience long delays. Where the key that is being checked has been obtained from an untrusted source this may lead to a Denial of Service. When function EVP_PKEY_public_check() is called on RSA public keys, a computation is done to confirm that the RSA modulus, n, is composite. For valid RSA keys, n is a product of two or more large primes and this computation completes quickly. However, if n is an overly large prime, then this computation would take a long time. An application that calls EVP_PKEY_public_check() and supplies an RSA key obtained from an untrusted source could be vulnerable to a Denial of Service attack. The function EVP_PKEY_public_check() is not called from other OpenSSL functions however it is called from the OpenSSL pkey command line application. For that reason that application is also vulnerable if used with the \u0027-pubin\u0027 and \u0027-check\u0027 options on untrusted data. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2023-6237"
    },
    {
      "cve": "CVE-2023-7250",
      "cwe": {
        "id": "CWE-183",
        "name": "Permissive List of Allowed Inputs"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in iperf, a utility for testing network performance using TCP, UDP, and SCTP. A malicious or malfunctioning client can send less than the expected amount of data to the iperf server, which can cause the server to hang indefinitely waiting for the remainder or until the connection gets closed. This will prevent other connections to the server, leading to a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2023-7250"
    },
    {
      "cve": "CVE-2023-23454",
      "cwe": {
        "id": "CWE-843",
        "name": "Access of Resource Using Incompatible Type (\u0027Type Confusion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "cbq_classify in net/sched/sch_cbq.c in the Linux kernel through 6.1.4 allows attackers to cause a denial of service (slab-out-of-bounds read) because of type confusion (non-negative numbers can sometimes indicate a TC_ACT_SHOT condition rather than valid classification results).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2023-23454"
    },
    {
      "cve": "CVE-2023-23455",
      "cwe": {
        "id": "CWE-843",
        "name": "Access of Resource Using Incompatible Type (\u0027Type Confusion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "atm_tc_enqueue in net/sched/sch_atm.c in the Linux kernel through 6.1.4 allows attackers to cause a denial of service because of type confusion (non-negative numbers can sometimes indicate a TC_ACT_SHOT condition rather than valid classification results).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2023-23455"
    },
    {
      "cve": "CVE-2023-23559",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In rndis_query_oid in drivers/net/wireless/rndis_wlan.c in the Linux kernel through 6.1.5, there is an integer overflow in an addition.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2023-23559"
    },
    {
      "cve": "CVE-2023-26545",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel before 6.1.13, there is a double free in net/mpls/af_mpls.c upon an allocation failure (for registering the sysctl table under a new location) during the renaming of a device.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2023-26545"
    },
    {
      "cve": "CVE-2023-28484",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libxml2 before 2.10.4, parsing of certain invalid XSD schemas can lead to a NULL pointer dereference and subsequently a segfault. This occurs in xmlSchemaFixupComplexType in xmlschemas.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2023-28484"
    },
    {
      "cve": "CVE-2023-28578",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Memory corruption in Core Services while executing the command for removing a single event listener.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.3,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2023-28578"
    },
    {
      "cve": "CVE-2023-29469",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.10.4. When hashing empty dict strings in a crafted XML document, xmlDictComputeFastKey in dict.c can produce non-deterministic values, leading to various logic and memory errors, such as a double free. This behavior occurs because there is an attempt to use the first byte of an empty string, and any value is possible (not solely the \u0027\\0\u0027 value).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2023-29469"
    },
    {
      "cve": "CVE-2023-31085",
      "cwe": {
        "id": "CWE-369",
        "name": "Divide By Zero"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in drivers/mtd/ubi/cdev.c in the Linux kernel 6.2. There is a divide-by-zero error in do_div(sz,mtd-\u003eerasesize), used indirectly by ctrl_cdev_ioctl, when mtd-\u003eerasesize is 0.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2023-31085"
    },
    {
      "cve": "CVE-2023-31315",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Improper validation in a model specific register (MSR) could allow a malicious program with ring0 access to modify SMM configuration while SMI lock is enabled, potentially leading to arbitrary code execution.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2023-31315"
    },
    {
      "cve": "CVE-2023-35001",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Linux Kernel nftables Out-Of-Bounds Read/Write Vulnerability; nft_byteorder poorly handled vm register contents when CAP_NET_ADMIN is in any user or network namespace",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2023-35001"
    },
    {
      "cve": "CVE-2023-39192",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Netfilter subsystem in the Linux kernel. The xt_u32 module did not validate the fields in the xt_u32 structure. This flaw allows a local privileged attacker to trigger an out-of-bounds read by setting the size fields with a value beyond the array boundaries, leading to a crash or information disclosure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:C/C:H/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2023-39192"
    },
    {
      "cve": "CVE-2023-39193",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Netfilter subsystem in the Linux kernel. The sctp_mt_check did not validate the flag_count field. This flaw allows a local privileged (CAP_NET_ADMIN) attacker to trigger an out-of-bounds read, leading to a crash or information disclosure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2023-39193"
    },
    {
      "cve": "CVE-2023-42754",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer dereference flaw was found in the Linux kernel ipv4 stack. The socket buffer (skb) was assumed to be associated with a device before calling __ip_options_compile, which is not always the case if the skb is re-routed by ipvs. This issue may allow a local user with CAP_NET_ADMIN privileges to crash the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2023-42754"
    },
    {
      "cve": "CVE-2023-43522",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Transient DOS while key unwrapping process, when the given encrypted key is empty or NULL.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2023-43522"
    },
    {
      "cve": "CVE-2023-44320",
      "cwe": {
        "id": "CWE-425",
        "name": "Direct Request (\u0027Forced Browsing\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Affected devices do not properly validate the authentication when performing certain modifications in the web interface allowing an authenticated attacker to influence the user interface configured by an administrator.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2023-44320"
    },
    {
      "cve": "CVE-2023-44322",
      "cwe": {
        "id": "CWE-252",
        "name": "Unchecked Return Value"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Affected devices can be configured to send emails when certain events occur on the device. When presented with an invalid response from the SMTP server, the device triggers an error that disrupts email sending. An attacker with access to the network can use this to do disable notification of users when certain events occur.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2023-44322"
    },
    {
      "cve": "CVE-2023-45853",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "MiniZip in zlib through 1.3 has an integer overflow and resultant heap-based buffer overflow in zipOpenNewFileInZip4_64 via a long filename, comment, or extra field. NOTE: MiniZip is not a supported part of the zlib product.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2023-45853"
    },
    {
      "cve": "CVE-2023-45863",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in lib/kobject.c in the Linux kernel before 6.2.3. With root access, an attacker can trigger a race condition that results in a fill_kobj_path out-of-bounds write.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2023-45863"
    },
    {
      "cve": "CVE-2023-48795",
      "cwe": {
        "id": "CWE-222",
        "name": "Truncation of Security-relevant Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The SSH transport protocol with certain OpenSSH extensions, found in OpenSSH before 9.6 and other products, allows remote attackers to bypass integrity checks such that some packets are omitted (from the extension negotiation message), and a client and server may consequently end up with a connection for which some security features have been downgraded or disabled, aka a Terrapin attack. This occurs because the SSH Binary Packet Protocol (BPP), implemented by these extensions, mishandles the handshake phase and mishandles use of sequence numbers. For example, there is an effective attack against SSH\u0027s use of ChaCha20-Poly1305 (and CBC with Encrypt-then-MAC). The bypass occurs in chacha20-poly1305@openssh.com and (if CBC is used) the -etm@openssh.com MAC algorithms. This also affects Maverick Synergy Java SSH API before 3.1.0-SNAPSHOT, Dropbear through 2022.83, Ssh before 5.1.1 in Erlang/OTP, PuTTY before 0.80, AsyncSSH before 2.14.2, golang.org/x/crypto before 0.17.0, libssh before 0.10.6, libssh2 through 1.11.0, Thorn Tech SFTP Gateway before 3.4.6, Tera Term before 5.1, Paramiko before 3.4.0, jsch before 0.2.15, SFTPGo before 2.5.6, Netgate pfSense Plus through 23.09.1, Netgate pfSense CE through 2.7.2, HPN-SSH through 18.2.0, ProFTPD before 1.3.8b (and before1.3.9rc2), ORYX CycloneSSH before 2.3.4, NetSarang XShell 7 before Build 0144, CrushFTP before 10.6.0, ConnectBot SSH library before 2.2.22, Apache MINA sshd through 2.11.0, sshj through 0.37.0, TinySSH through 20230101, trilead-ssh2 6401, the net-ssh gem 7.2.0 for Ruby, the mscdex ssh2 module before 1.15.0 for Node.js, the thrussh library before 0.35.1 for Rust, and the Russh crate before 0.40.2 for Rust; and there could be effects on Bitvise SSH through 9.31.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2023-48795"
    },
    {
      "cve": "CVE-2023-51384",
      "cwe": {
        "id": "CWE-304",
        "name": "Missing Critical Step in Authentication"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In ssh-agent in OpenSSH before 9.6, certain destination constraints can be incompletely applied. When destination constraints are specified during addition of PKCS#11-hosted private keys, these constraints are only applied to the first key, even if a PKCS#11 token returns multiple keys.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2023-51384"
    },
    {
      "cve": "CVE-2023-51385",
      "cwe": {
        "id": "CWE-78",
        "name": "Improper Neutralization of Special Elements used in an OS Command (\u0027OS Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In ssh in OpenSSH before 9.6, OS command injection might occur if a user name or host name has shell metacharacters, and this name is referenced by an expansion token in certain situations. For example, an untrusted Git repository can have a submodule with shell metacharacters in a user name or host name.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2023-51385"
    },
    {
      "cve": "CVE-2024-0727",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Processing a maliciously formatted PKCS12 file may lead OpenSSL to crash leading to a potential Denial of Service attack",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2024-0727"
    },
    {
      "cve": "CVE-2024-2511",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Some non-default TLS server configurations can cause unbounded memory growth when processing TLSv1.3 sessions. An attacker may exploit certain server configurations to trigger unbounded memory growth that would lead to a Denial of Service This problem can occur in TLSv1.3 if the non-default SSL_OP_NO_TICKET option is being used (but not if early_data support is also configured and the default anti-replay protection is in use). In this case, under certain conditions, the session cache can get into an incorrect state and it will fail to flush properly as it fills. The session cache will continue to grow in an unbounded manner. A malicious client could deliberately create the scenario for this failure to force a Denial of Service. It may also happen by accident in normal operation. This issue only affects TLS servers supporting TLSv1.3. It does not affect TLS clients. The FIPS modules in 3.2, 3.1 and 3.0 are not affected by this issue. OpenSSL 1.0.2 is also not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2024-2511"
    },
    {
      "cve": "CVE-2024-4603",
      "cwe": {
        "id": "CWE-834",
        "name": "Excessive Iteration"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Checking excessively long DSA keys or parameters may be very slow. Applications that use the functions EVP_PKEY_param_check() or EVP_PKEY_public_check() to check a DSA public key or DSA parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The functions EVP_PKEY_param_check() or EVP_PKEY_public_check() perform various checks on DSA parameters. Some of those computations take a long time if the modulus (`p` parameter) is too large. Trying to use a very large modulus is slow and OpenSSL will not allow using public keys with a modulus which is over 10,000 bits in length for signature verification. However the key and parameter check functions do not limit the modulus size when performing the checks. An application that calls EVP_PKEY_param_check() or EVP_PKEY_public_check() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. These functions are not called by OpenSSL itself on untrusted DSA keys so only applications that directly call these functions may be vulnerable. Also vulnerable are the OpenSSL pkey and pkeyparam command line applications when using the `-check` option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2024-4603"
    },
    {
      "cve": "CVE-2024-4741",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Calling the OpenSSL API function SSL_free_buffers may cause memory to be accessed that was previously freed in some situations",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2024-4741"
    },
    {
      "cve": "CVE-2024-5535",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Calling the OpenSSL API function SSL_select_next_proto with an empty supported client protocols buffer may cause a crash or memory contents to be sent to the peer. A buffer overread can have a range of potential consequences such as unexpected application beahviour or a crash. In particular this issue could result in up to 255 bytes of arbitrary private data from memory being sent to the peer leading to a loss of confidentiality. However, only applications that directly call the SSL_select_next_proto function with a 0 length list of supported client protocols are affected by this issue. This would normally never be a valid scenario and is typically not under attacker control but may occur by accident in the case of a configuration or programming error in the calling application. The OpenSSL API function SSL_select_next_proto is typically used by TLS applications that support ALPN (Application Layer Protocol Negotiation) or NPN (Next Protocol Negotiation). NPN is older, was never standardised and is deprecated in favour of ALPN. We believe that ALPN is significantly more widely deployed than NPN. The SSL_select_next_proto function accepts a list of protocols from the server and a list of protocols from the client and returns the first protocol that appears in the server list that also appears in the client list. In the case of no overlap between the two lists it returns the first item in the client list. In either case it will signal whether an overlap between the two lists was found. In the case where SSL_select_next_proto is called with a zero length client list it fails to notice this condition and returns the memory immediately following the client list pointer (and reports that there was no overlap in the lists). This function is typically called from a server side application callback for ALPN or a client side application callback for NPN. In the case of ALPN the list of protocols supplied by the client is guaranteed by libssl to never be zero in length. The list of server protocols comes from the application and should never normally be expected to be of zero length. In this case if the SSL_select_next_proto function has been called as expected (with the list supplied by the client passed in the client/client_len parameters), then the application will not be vulnerable to this issue. If the application has accidentally been configured with a zero length server list, and has accidentally passed that zero length server list in the client/client_len parameters, and has additionally failed to correctly handle a \"no overlap\" response (which would normally result in a handshake failure in ALPN) then it will be vulnerable to this problem. In the case of NPN, the protocol permits the client to opportunistically select a protocol when there is no overlap. OpenSSL returns the first client protocol in the no overlap case in support of this. The list of client protocols comes from the application and should never normally be expected to be of zero length. However if the SSL_select_next_proto function is accidentally called with a client_len of 0 then an invalid memory pointer will be returned instead. If the application uses this output as the opportunistic protocol then the loss of confidentiality will occur. This issue has been assessed as Low severity because applications are most likely to be vulnerable if they are using NPN instead of ALPN - but NPN is not widely used. It also requires an application configuration or programming error. Finally, this issue would not typically be under attacker control making active exploitation unlikely. The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. Due to the low severity of this issue we are not issuing new releases of OpenSSL at this time. The fix will be included in the next releases when they become available.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2024-5535"
    },
    {
      "cve": "CVE-2024-6119",
      "cwe": {
        "id": "CWE-843",
        "name": "Access of Resource Using Incompatible Type (\u0027Type Confusion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Applications performing certificate name checks (e.g., TLS clients checking server certificates) may attempt to read an invalid memory address resulting in abnormal termination of the application process. Impact summary: Abnormal termination of an application can a cause a denial of service. Applications performing certificate name checks (e.g., TLS clients checking server certificates) may attempt to read an invalid memory address when comparing the expected name with an `otherName` subject alternative name of an X.509 certificate. This may result in an exception that terminates the application program. Note that basic certificate chain validation (signatures, dates, ...) is not affected, the denial of service can occur only when the application also specifies an expected DNS name, Email address or IP address. TLS servers rarely solicit client certificates, and even when they do, they generally don\u0027t perform a name check against a reference identifier (expected identity), but rather extract the presented identity after checking the certificate chain. So TLS servers are generally not affected and the severity of the issue is Moderate. The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2024-6119"
    },
    {
      "cve": "CVE-2024-9143",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Use of the low-level GF(2m) elliptic curve APIs with untrusted explicit values for the field polynomial can lead to out-of-bounds memory reads or writes. Impact summary: Out of bound memory writes can lead to an application crash or even a possibility of a remote code execution, however, in all the protocols involving Elliptic Curve Cryptography that we\u0027re aware of, either only \"named curves\" are supported, or, if explicit curve parameters are supported, they specify an X9.62 encoding of binary (GF(2m)) curves that can\u0027t represent problematic input values. Thus the likelihood of existence of a vulnerable application is low. In particular, the X9.62 encoding is used for ECC keys in X.509 certificates, so problematic inputs cannot occur in the context of processing X.509 certificates. Any problematic use-cases would have to be using an \"exotic\" curve encoding. The affected APIs include: EC_GROUP_new_curve_GF2m(), EC_GROUP_new_from_params(), and various supporting BN_GF2m_*() functions. Applications working with \"exotic\" explicit binary (GF(2m)) curve parameters, that make it possible to represent invalid field polynomials with a zero constant term, via the above or similar APIs, may terminate abruptly as a result of reading or writing outside of array bounds. Remote code execution cannot easily be ruled out. The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2024-9143"
    },
    {
      "cve": "CVE-2024-23814",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The integrated ICMP service of the network stack of affected devices can be  forced to exhaust its available memory resources when receiving specially crafted messages targeting IP fragment re-assembly. This could allow an unauthenticated remote attacker to cause a temporary denial of service condition of the ICMP service, other communication services are not affected. Affected devices will resume normal operation after the attack terminates.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2024-23814"
    },
    {
      "cve": "CVE-2024-26306",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "iPerf3 before 3.17, when used with OpenSSL before 3.2.0 as a server with RSA authentication, allows a timing side channel in RSA decryption operations. This side channel could be sufficient for an attacker to recover credential plaintext. It requires the attacker to send a large number of messages for decryption, as described in \"Everlasting ROBOT: the Marvin Attack\" by Hubert Kario.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2024-26306"
    },
    {
      "cve": "CVE-2024-33016",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "memory corruption when an invalid firehose patch command is invoked.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.8,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:P/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2024-33016"
    },
    {
      "cve": "CVE-2024-50560",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Affected devices truncates usernames longer than 15 characters when accessed via SSH or Telnet. This could allow an attacker to compromise system integrity.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.1,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:N/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2024-50560"
    },
    {
      "cve": "CVE-2024-50561",
      "cwe": {
        "id": "CWE-79",
        "name": "Improper Neutralization of Input During Web Page Generation (\u0027Cross-site Scripting\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Affected devices do not properly sanitize the filenames before uploading. This could allow an authenticated remote attacker to compromise of integrity of the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2024-50561"
    },
    {
      "cve": "CVE-2024-50572",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Affected devices do not properly sanitize an input field.  This could allow an authenticated remote attacker with administrative privileges to inject code or spawn a system root shell.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.2,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2024-50572"
    },
    {
      "cve": "CVE-2025-24499",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Affected devices do not properly validate input while loading the configuration files. This could allow an authenticated remote attacker to execute arbitrary shell commands on the device.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.2,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2025-24499"
    },
    {
      "cve": "CVE-2025-24532",
      "cwe": {
        "id": "CWE-284",
        "name": "Improper Access Control"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Affected devices with role `user` is affected by incorrect authorization in SNMPv3 View configuration. This could allow an attacker to change the View Type of SNMPv3 Views.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0019"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.0.0 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109977720/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0019"
          ]
        }
      ],
      "title": "CVE-2025-24532"
    }
  ]
}

{
  "document": {
    "acknowledgments": [
      {
        "organization": "Siemens ProductCERT",
        "summary": "reporting these vulnerabilities to CISA."
      }
    ],
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Disclosure is not limited",
      "tlp": {
        "label": "WHITE",
        "url": "https://us-cert.cisa.gov/tlp/"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "SINEC INS before V1.0 SP2 Update 2 is affected by multiple vulnerabilities.\n\nSiemens has released an update for SINEC INS and recommends to update to the latest version.",
        "title": "Summary"
      },
      {
        "category": "general",
        "text": "As a general security measure, Siemens strongly recommends to protect network access to devices with appropriate mechanisms. In order to operate the devices in a protected IT environment, Siemens recommends to configure the environment according to Siemens\u0027 operational guidelines for Industrial Security (Download: \nhttps://www.siemens.com/cert/operational-guidelines-industrial-security), and to follow the recommendations in the product manuals.\nAdditional information on Industrial Security by Siemens can be found at: https://www.siemens.com/industrialsecurity",
        "title": "General Recommendations"
      },
      {
        "category": "general",
        "text": "For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories",
        "title": "Additional Resources"
      },
      {
        "category": "legal_disclaimer",
        "text": "Siemens Security Advisories are subject to the terms and conditions contained in Siemens\u0027 underlying license terms or other applicable agreements previously agreed to with Siemens (hereinafter \"License Terms\"). To the extent applicable to information, software or documentation made available in or through a Siemens Security Advisory, the Terms of Use of Siemens\u0027 Global Website (https://www.siemens.com/terms_of_use, hereinafter \"Terms of Use\"), in particular Sections 8-10 of the Terms of Use, shall apply additionally. In case of conflicts, the License Terms shall prevail over the Terms of Use.",
        "title": "Terms of Use"
      },
      {
        "category": "legal_disclaimer",
        "text": "All information products included in https://us-cert.cisa.gov/ics are provided \"as is\" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see https://us-cert.cisa.gov/tlp/.",
        "title": "Legal Notice"
      },
      {
        "category": "other",
        "text": "This CISA CSAF advisory was converted from Siemens ProductCERT\u0027s CSAF advisory.",
        "title": "Advisory Conversion Disclaimer"
      },
      {
        "category": "other",
        "text": "Multiple",
        "title": "Critical infrastructure sectors"
      },
      {
        "category": "other",
        "text": "Worldwide",
        "title": "Countries/areas deployed"
      },
      {
        "category": "other",
        "text": "Germany",
        "title": "Company headquarters location"
      },
      {
        "category": "general",
        "text": "CISA recommends users take defensive measures to minimize the exploitation risk of this vulnerability.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Minimize network exposure for all control system devices and/or systems, and ensure they are not accessible from the internet.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Locate control system networks and remote devices behind firewalls and isolate them from business networks.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "When remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most recent version available. Also recognize VPN is only as secure as its connected devices.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets. Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.",
        "title": "Recommended Practices"
      }
    ],
    "publisher": {
      "category": "other",
      "contact_details": "central@cisa.dhs.gov",
      "name": "CISA",
      "namespace": "https://www.cisa.gov/"
    },
    "references": [
      {
        "category": "self",
        "summary": "SSA-077170: Multiple Vulnerabilities in SINEC INS before V1.0 SP2 Update 2 - CSAF Version",
        "url": "https://cert-portal.siemens.com/productcert/csaf/ssa-077170.json"
      },
      {
        "category": "self",
        "summary": "SSA-077170: Multiple Vulnerabilities in SINEC INS before V1.0 SP2 Update 2 - HTML Version",
        "url": "https://cert-portal.siemens.com/productcert/html/ssa-077170.html"
      },
      {
        "category": "self",
        "summary": "SSA-077170: Multiple Vulnerabilities in SINEC INS before V1.0 SP2 Update 2 - PDF Version",
        "url": "https://cert-portal.siemens.com/productcert/pdf/ssa-077170.pdf"
      },
      {
        "category": "self",
        "summary": "SSA-077170: Multiple Vulnerabilities in SINEC INS before V1.0 SP2 Update 2 - TXT Version",
        "url": "https://cert-portal.siemens.com/productcert/txt/ssa-077170.txt"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-23-348-16 JSON",
        "url": "https://raw.githubusercontent.com/cisagov/CSAF/develop/csaf_files/OT/white/2023/icsa-23-348-16.json"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-23-348-16 - Web Version",
        "url": "https://www.cisa.gov/news-events/ics-advisories/icsa-23-348-16"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/alerts/ICS-ALERT-10-301-01"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/resources-tools/resources/ics-recommended-practices"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/topics/industrial-control-systems"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/sites/default/files/publications/Cybersecurity_Best_Practices_for_Industrial_Control_Systems.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/tips/ICS-TIP-12-146-01B"
      }
    ],
    "title": "Siemens SINEC INS",
    "tracking": {
      "current_release_date": "2023-12-12T00:00:00.000000Z",
      "generator": {
        "engine": {
          "name": "CISA CSAF Generator",
          "version": "1.0.0"
        }
      },
      "id": "ICSA-23-348-16",
      "initial_release_date": "2023-12-12T00:00:00.000000Z",
      "revision_history": [
        {
          "date": "2023-12-12T00:00:00.000000Z",
          "legacy_version": "1.0",
          "number": "1",
          "summary": "Publication Date"
        }
      ],
      "status": "final",
      "version": "1"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV1.0_SP2_Update_2",
                "product": {
                  "name": "SINEC INS",
                  "product_id": "CSAFPID-0001"
                }
              }
            ],
            "category": "product_name",
            "name": "SINEC INS"
          }
        ],
        "category": "vendor",
        "name": "Siemens"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2023-0464",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A security vulnerability has been identified in all supported versions of OpenSSL related to the verification of X.509 certificate chains that include policy constraints. Attackers may be able to exploit this vulnerability by creating a malicious certificate chain that triggers exponential use of computational resources, leading to a denial-of-service (DoS) attack on affected systems.\r\n\r\nPolicy processing is disabled by default but can be enabled by passing the `-policy` argument to the command line utilities or by calling the `X509_VERIFY_PARAM_set1_policies()` function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109825710/"
        },
        {
          "category": "workaround",
          "details": "Restrict access to application webserver for trusted users only",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-0464"
    },
    {
      "cve": "CVE-2023-27538",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl would reuse a previously created connection even when an SSH related option had been changed that should have prohibited reuse. libcurl keeps previously used connections in a connection pool for subsequent transfers to reuse if one of them matches the setup. However, two SSH settings were left out from the configuration match checks, making them match too easily.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109825710/"
        },
        {
          "category": "workaround",
          "details": "Restrict access to application webserver for trusted users only",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-27538"
    },
    {
      "cve": "CVE-2023-48427",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Affected products do not properly validate the certificate of the configured UMC server. This could allow an attacker to intercept credentials that are sent to the UMC server as well as to manipulate responses, potentially allowing an attacker to escalate privileges.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109825710/"
        },
        {
          "category": "workaround",
          "details": "Restrict access to application webserver for trusted users only",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-48427"
    },
    {
      "cve": "CVE-2023-48428",
      "cwe": {
        "id": "CWE-78",
        "name": "Improper Neutralization of Special Elements used in an OS Command (\u0027OS Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The radius configuration mechanism of affected products does not correctly check uploaded certificates. A malicious admin could upload a crafted certificate resulting in a denial-of-service condition or potentially issue commands on system level.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109825710/"
        },
        {
          "category": "workaround",
          "details": "Restrict access to application webserver for trusted users only",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.2,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-48428"
    },
    {
      "cve": "CVE-2023-48429",
      "cwe": {
        "id": "CWE-394",
        "name": "Unexpected Status Code or Return Value"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The Web UI of affected devices does not check the length of parameters in certain conditions. This allows a malicious admin to crash the server by sending a crafted request to the server. The server will automatically restart.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109825710/"
        },
        {
          "category": "workaround",
          "details": "Restrict access to application webserver for trusted users only",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 2.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-48429"
    },
    {
      "cve": "CVE-2023-48430",
      "cwe": {
        "id": "CWE-392",
        "name": "Missing Report of Error Condition"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The REST API of affected devices does not check the length of parameters in certain conditions. This allows a malicious admin to crash the server by sending a crafted request to the API. The server will automatically restart.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109825710/"
        },
        {
          "category": "workaround",
          "details": "Restrict access to application webserver for trusted users only",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 2.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-48430"
    },
    {
      "cve": "CVE-2023-48431",
      "cwe": {
        "id": "CWE-754",
        "name": "Improper Check for Unusual or Exceptional Conditions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Affected software does not correctly validate the response received by an UMC server. An attacker can use this to crash the affected software by providing and configuring a malicious UMC server or by manipulating the traffic from a legitimate UMC server (i.e. leveraging CVE-2023-48427).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109825710/"
        },
        {
          "category": "workaround",
          "details": "Restrict access to application webserver for trusted users only",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.8,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:C/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-48431"
    }
  ]
}

{
  "document": {
    "acknowledgments": [
      {
        "organization": "Siemens ProductCERT",
        "summary": "reporting these vulnerabilities to CISA."
      }
    ],
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Disclosure is not limited",
      "tlp": {
        "label": "WHITE",
        "url": "https://us-cert.cisa.gov/tlp/"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the SIMATIC S7-1500 TM MFP V1.0.\n\nSiemens has released a new version for SIMATIC S7-1500 TM MFP -\u00a0GNU/Linux subsystem and recommends to update to the latest version.\n\nThis advisory lists vulnerabilities for firmware version V1.0 only; for V1.1 refer to Siemens Security Advisory SSA-265688 (\nhttps://cert-portal.siemens.com/productcert/html/ssa-265688.html).",
        "title": "Summary"
      },
      {
        "category": "general",
        "text": "As a general security measure, Siemens strongly recommends to protect network access to devices with appropriate mechanisms. In order to operate the devices in a protected IT environment, Siemens recommends to configure the environment according to Siemens\u0027 operational guidelines for Industrial Security (Download: \nhttps://www.siemens.com/cert/operational-guidelines-industrial-security), and to follow the recommendations in the product manuals.\nAdditional information on Industrial Security by Siemens can be found at: https://www.siemens.com/industrialsecurity",
        "title": "General Recommendations"
      },
      {
        "category": "general",
        "text": "For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories",
        "title": "Additional Resources"
      },
      {
        "category": "legal_disclaimer",
        "text": "Siemens Security Advisories are subject to the terms and conditions contained in Siemens\u0027 underlying license terms or other applicable agreements previously agreed to with Siemens (hereinafter \"License Terms\"). To the extent applicable to information, software or documentation made available in or through a Siemens Security Advisory, the Terms of Use of Siemens\u0027 Global Website (https://www.siemens.com/terms_of_use, hereinafter \"Terms of Use\"), in particular Sections 8-10 of the Terms of Use, shall apply additionally. In case of conflicts, the License Terms shall prevail over the Terms of Use.",
        "title": "Terms of Use"
      },
      {
        "category": "legal_disclaimer",
        "text": "All information products included in https://us-cert.cisa.gov/ics are provided \"as is\" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see https://us-cert.cisa.gov/tlp/.",
        "title": "Legal Notice"
      },
      {
        "category": "other",
        "text": "This CISA CSAF advisory was converted from Siemens ProductCERT\u0027s CSAF advisory.",
        "title": "Advisory Conversion Disclaimer"
      },
      {
        "category": "other",
        "text": "Multiple",
        "title": "Critical infrastructure sectors"
      },
      {
        "category": "other",
        "text": "Worldwide",
        "title": "Countries/areas deployed"
      },
      {
        "category": "other",
        "text": "Germany",
        "title": "Company headquarters location"
      },
      {
        "category": "general",
        "text": "CISA recommends users take defensive measures to minimize the exploitation risk of this vulnerability.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Minimize network exposure for all control system devices and/or systems, and ensure they are not accessible from the internet.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Locate control system networks and remote devices behind firewalls and isolate them from business networks.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "When remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most recent version available. Also recognize VPN is only as secure as its connected devices.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets. Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.",
        "title": "Recommended Practices"
      }
    ],
    "publisher": {
      "category": "other",
      "contact_details": "central@cisa.dhs.gov",
      "name": "CISA",
      "namespace": "https://www.cisa.gov/"
    },
    "references": [
      {
        "category": "self",
        "summary": "SSA-794697: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 TM MFP before V1.1 - CSAF Version",
        "url": "https://cert-portal.siemens.com/productcert/csaf/ssa-794697.json"
      },
      {
        "category": "self",
        "summary": "SSA-794697: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 TM MFP before V1.1 - HTML Version",
        "url": "https://cert-portal.siemens.com/productcert/html/ssa-794697.html"
      },
      {
        "category": "self",
        "summary": "SSA-794697: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 TM MFP before V1.1 - PDF Version",
        "url": "https://cert-portal.siemens.com/productcert/pdf/ssa-794697.pdf"
      },
      {
        "category": "self",
        "summary": "SSA-794697: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 TM MFP before V1.1 - TXT Version",
        "url": "https://cert-portal.siemens.com/productcert/txt/ssa-794697.txt"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-23-166-11 JSON",
        "url": "https://raw.githubusercontent.com/cisagov/CSAF/develop/csaf_files/OT/white/2023/icsa-23-166-11.json"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-23-166-11 - Web Version",
        "url": "https://www.cisa.gov/news-events/ics-advisories/icsa-23-166-11"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/alerts/ICS-ALERT-10-301-01"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/resources-tools/resources/ics-recommended-practices"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/topics/industrial-control-systems"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/sites/default/files/publications/Cybersecurity_Best_Practices_for_Industrial_Control_Systems.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/tips/ICS-TIP-12-146-01B"
      }
    ],
    "title": "Siemens SIMATIC S7-1500 TM MFP Linux Kernel",
    "tracking": {
      "current_release_date": "2024-04-09T00:00:00.000000Z",
      "generator": {
        "engine": {
          "name": "CISA CSAF Generator",
          "version": "1.0.0"
        }
      },
      "id": "ICSA-23-166-11",
      "initial_release_date": "2023-06-13T00:00:00.000000Z",
      "revision_history": [
        {
          "date": "2023-06-13T00:00:00.000000Z",
          "legacy_version": "1.0",
          "number": "1",
          "summary": "Publication Date"
        },
        {
          "date": "2023-07-11T00:00:00.000000Z",
          "legacy_version": "1.1",
          "number": "2",
          "summary": "Added CVE-2022-4269, CVE-2023-3141, CVE-2023-3268, CVE-2023-31436, CVE-2023-32233"
        },
        {
          "date": "2023-08-08T00:00:00.000000Z",
          "legacy_version": "1.2",
          "number": "3",
          "summary": "Added CVE-2023-3446, CVE-2023-3389, CVE-2022-1015, \r\nCVE-2023-3609"
        },
        {
          "date": "2023-09-12T00:00:00.000000Z",
          "legacy_version": "1.3",
          "number": "4",
          "summary": "Added CVE-2023-3338"
        },
        {
          "date": "2023-11-14T00:00:00.000000Z",
          "legacy_version": "1.4",
          "number": "5",
          "summary": "Added CVE-2023-1206, CVE-2023-2898, CVE-2023-3610, CVE-2023-3611, CVE-2023-3772, CVE-2023-3773, CVE-2023-3777, CVE-2023-4004, CVE-2023-4015, CVE-2023-4273, CVE-2023-4623, CVE-2023-4921, CVE-2023-35001, CVE-2023-37453, CVE-2023-39192, CVE-2023-39193, CVE-2023-39194, CVE-2023-42753, CVE-2023-42755"
        },
        {
          "date": "2023-12-12T00:00:00.000000Z",
          "legacy_version": "1.5",
          "number": "6",
          "summary": "Added CVE-2021-44879, CVE-2023-5178, CVE-2023-5197, CVE-2023-5678, CVE-2023-5717, CVE-2023-31085, CVE-2023-35827, CVE-2023-39189, CVE-2023-42754, CVE-2023-45863, CVE-2023-45871"
        },
        {
          "date": "2024-01-09T00:00:00.000000Z",
          "legacy_version": "1.6",
          "number": "7",
          "summary": "Added CVE-2023-48795"
        },
        {
          "date": "2024-02-13T00:00:00.000000Z",
          "legacy_version": "1.7",
          "number": "8",
          "summary": "Added CVE-2020-12762, CVE-2023-6606, CVE-2023-6931, CVE-2023-6932, CVE-2023-7008, CVE-2023-7104, CVE-2023-36660, CVE-2023-50495, CVE-2023-51384, CVE-2023-51385, CVE-2023-51767, CVE-2024-0232, CVE-2024-0553, CVE-2024-0567, CVE-2024-0584, CVE-2024-0684, CVE-2024-22365, CVE-2024-25062"
        },
        {
          "date": "2024-04-09T00:00:00.000000Z",
          "legacy_version": "1.8",
          "number": "9",
          "summary": "Added fix for SIMATIC S7-1500 TM MFP - GNU/Linux subsystem"
        }
      ],
      "status": "final",
      "version": "9"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV1.1",
                "product": {
                  "name": "SIMATIC S7-1500 TM MFP -\u00a0GNU/Linux subsystem",
                  "product_id": "CSAFPID-0001"
                }
              }
            ],
            "category": "product_name",
            "name": "SIMATIC S7-1500 TM MFP -\u00a0GNU/Linux subsystem"
          }
        ],
        "category": "vendor",
        "name": "Siemens"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2020-12762",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "json-c through 0.14 has an integer overflow and out-of-bounds write via a large JSON file, as demonstrated by printbuf_memappend.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2020-12762"
    },
    {
      "cve": "CVE-2021-3759",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A memory overflow vulnerability was found in the Linux kernel\u2019s ipc functionality of the memcg subsystem, in the way a user calls the semget function multiple times, creating semaphores. This flaw allows a local user to starve the resources, causing a denial of service. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2021-3759"
    },
    {
      "cve": "CVE-2021-4037",
      "cwe": {
        "id": "CWE-284",
        "name": "Improper Access Control"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in the fs/inode.c:inode_init_owner() function logic of the LInux kernel that allows local users to create files for the XFS file-system with an unintended group ownership and with group execution and SGID permission bits set, in a scenario where a directory is SGID and belongs to a certain group and is writable by a user who is not a member of this group. This can lead to excessive permissions granted in case when they should not. This vulnerability is similar to the previous CVE-2018-13405 and adds the missed fix for the XFS.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2021-4037"
    },
    {
      "cve": "CVE-2021-33655",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When sending malicous data to kernel by ioctl cmd FBIOPUT_VSCREENINFO,kernel will write memory out of bounds.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2021-33655"
    },
    {
      "cve": "CVE-2021-44879",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In gc_data_segment in fs/f2fs/gc.c in the Linux kernel before 5.16.3, special files are not considered, leading to a move_data_page NULL pointer dereference.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2021-44879"
    },
    {
      "cve": "CVE-2022-0171",
      "cwe": {
        "id": "CWE-459",
        "name": "Incomplete Cleanup"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel. The existing KVM SEV API has a vulnerability that allows a non-root (host) user-level application to crash the host kernel by creating a confidential guest VM instance in AMD CPU that supports Secure Encrypted Virtualization (SEV).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-0171"
    },
    {
      "cve": "CVE-2022-1012",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A memory leak problem was found in the TCP source port generation algorithm in net/ipv4/tcp.c due to the small table perturb size. This flaw may allow an attacker to information leak and may cause a denial of service problem.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.2,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-1012"
    },
    {
      "cve": "CVE-2022-1015",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel in linux/net/netfilter/nf_tables_api.c of the netfilter subsystem. This flaw allows a local user to cause an out-of-bounds write issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.6,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-1015"
    },
    {
      "cve": "CVE-2022-1184",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free flaw was found in fs/ext4/namei.c:dx_insert_block() in the Linux kernel\u2019s filesystem sub-component. This flaw allows a local attacker with a user privilege to cause a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-1184"
    },
    {
      "cve": "CVE-2022-1292",
      "cwe": {
        "id": "CWE-78",
        "name": "Improper Neutralization of Special Elements used in an OS Command (\u0027OS Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The c_rehash script does not properly sanitise shell metacharacters to prevent command injection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-1292"
    },
    {
      "cve": "CVE-2022-1343",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Under certain circumstances, the command line OCSP verify function reports successful verification when the verification in fact failed. In this case the incorrect successful response will also be accompanied by error messages showing the failure and contradicting the apparently successful result.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-1343"
    },
    {
      "cve": "CVE-2022-1434",
      "cwe": {
        "id": "CWE-327",
        "name": "Use of a Broken or Risky Cryptographic Algorithm"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When using the RC4-MD5 ciphersuite, which is disabled by default, an attacker is able to modify data in transit due to an incorrect use of the AAD data as the MAC key in OpenSSL 3.0. An attacker is not able to decrypt any communication.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-1434"
    },
    {
      "cve": "CVE-2022-1462",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds read flaw was found in the Linux kernel\u2019s TeleTYpe subsystem. The issue occurs in how a user triggers a race condition using ioctls TIOCSPTLCK and TIOCGPTPEER and TIOCSTI and TCXONC with leakage of memory in the flush_to_ldisc function. This flaw allows a local user to crash the system or read unauthorized random data from memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-1462"
    },
    {
      "cve": "CVE-2022-1473",
      "cwe": {
        "id": "CWE-404",
        "name": "Improper Resource Shutdown or Release"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The used OpenSSL version improperly reuses memory when decoding certificates or keys. This can lead to a process termination and Denial of Service for long lived processes.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-1473"
    },
    {
      "cve": "CVE-2022-1679",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free flaw was found in the Linux kernel\u2019s Atheros wireless adapter driver in the way a user forces the ath9k_htc_wait_for_target function to fail with some input messages. This flaw allows a local user to crash or potentially escalate their privileges on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-1679"
    },
    {
      "cve": "CVE-2022-1852",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer dereference flaw was found in the Linux kernel\u2019s KVM module, which can lead to a denial of service in the x86_emulate_insn in arch/x86/kvm/emulate.c. This flaw occurs while executing an illegal instruction in guest in the Intel CPU.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-1852"
    },
    {
      "cve": "CVE-2022-1882",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free flaw was found in the Linux kernel\u2019s pipes functionality in how a user performs manipulations with the pipe post_one_notification() after free_pipe_info() that is already called. This flaw allows a local user to crash or potentially escalate their privileges on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-1882"
    },
    {
      "cve": "CVE-2022-2068",
      "cwe": {
        "id": "CWE-78",
        "name": "Improper Neutralization of Special Elements used in an OS Command (\u0027OS Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In addition to the c_rehash shell command injection identified in CVE-2022-1292, further circumstances where the c_rehash script does not properly sanitise shell metacharacters to prevent command injection were found by code review. When the CVE-2022-1292 was fixed it was not discovered that there are other places in the script where the file names of certificates being hashed were possibly passed to a command executed through the shell. This script is distributed by some operating systems in a manner where it is automatically executed. On such operating systems, an attacker could execute arbitrary commands with the privileges of the script. Use of the c_rehash script is considered obsolete and should be replaced by the OpenSSL rehash command line tool.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-2068"
    },
    {
      "cve": "CVE-2022-2078",
      "cwe": {
        "id": "CWE-121",
        "name": "Stack-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in the Linux kernel\u0027s nft_set_desc_concat_parse() function .This flaw allows an attacker to trigger a buffer overflow via nft_set_desc_concat_parse() , causing a denial of service and possibly to run code.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-2078"
    },
    {
      "cve": "CVE-2022-2097",
      "cwe": {
        "id": "CWE-326",
        "name": "Inadequate Encryption Strength"
      },
      "notes": [
        {
          "category": "summary",
          "text": "AES OCB mode for 32-bit x86 platforms using the AES-NI assembly optimised implementation will not encrypt the entirety of the data under some circumstances. This could reveal sixteen bytes of data that was preexisting in the memory that wasn\u0027t written. In the special case of \"in place\" encryption, sixteen bytes of the plaintext would be revealed. Since OpenSSL does not support OCB based cipher suites for TLS and DTLS, they are both unaffected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-2097"
    },
    {
      "cve": "CVE-2022-2153",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel\u2019s KVM when attempting to set a SynIC IRQ. This issue makes it possible for a misbehaving VMM to write to SYNIC/STIMER MSRs, causing a NULL pointer dereference. This flaw allows an unprivileged local attacker on the host to issue specific ioctl calls, causing a kernel oops condition that results in a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-2153"
    },
    {
      "cve": "CVE-2022-2274",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The OpenSSL 3.0.4 release introduced a serious bug in the RSA implementation for X86_64 CPUs supporting the AVX512IFMA instructions. This issue makes the RSA implementation with 2048 bit private keys incorrect on such machines and memory corruption will happen during the computation. As a consequence of the memory corruption an attacker may be able to trigger a remote code execution on the machine performing the computation. SSL/TLS servers or other servers using 2048 bit RSA private keys running on machines supporting AVX512IFMA instructions of the X86_64 architecture are affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-2274"
    },
    {
      "cve": "CVE-2022-2327",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "io_uring use work_flags to determine which identity need to grab from the calling process to make sure it is consistent with the calling process when executing IORING_OP. Some operations are missing some types, which can lead to incorrect reference counts which can then lead to a double free. We recommend upgrading the kernel past commit df3f3bb5059d20ef094d6b2f0256c4bf4127a859",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-2327"
    },
    {
      "cve": "CVE-2022-2503",
      "cwe": {
        "id": "CWE-287",
        "name": "Improper Authentication"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Dm-verity is used for extending root-of-trust to root filesystems. LoadPin builds on this property to restrict module/firmware loads to just the trusted root filesystem. Device-mapper table reloads currently allow users with root privileges to switch out the target with an equivalent dm-linear target and bypass verification till reboot. This allows root to bypass LoadPin and can be used to load untrusted and unverified kernel modules and firmware, which implies arbitrary kernel execution and persistence for peripherals that do not verify firmware updates. We recommend upgrading past commit 4caae58406f8ceb741603eee460d79bacca9b1b5",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-2503"
    },
    {
      "cve": "CVE-2022-2586",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free flaw was found in nf_tables cross-table in the net/netfilter/nf_tables_api.c function in the Linux kernel. This flaw allows a local, privileged attacker to cause a use-after-free problem at the time of table deletion, possibly leading to local privilege escalation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-2586"
    },
    {
      "cve": "CVE-2022-2588",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Zhenpeng Lin discovered that the network packet scheduler implementation in the Linux kernel did not properly remove all references to a route filter before freeing it in some situations. A local attacker could use this to cause a denial of service (system crash) or execute arbitrary code.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-2588"
    },
    {
      "cve": "CVE-2022-2602",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel. A race issue occurs between an io_uring request and the Unix socket garbage collector, allowing an attacker local privilege escalation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-2602"
    },
    {
      "cve": "CVE-2022-2663",
      "cwe": {
        "id": "CWE-923",
        "name": "Improper Restriction of Communication Channel to Intended Endpoints"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was found in the Linux kernel in nf_conntrack_irc where the message handling can be confused and incorrectly matches the message. A firewall may be able to be bypassed when users are using unencrypted IRC with nf_conntrack_irc configured.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-2663"
    },
    {
      "cve": "CVE-2022-2905",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds memory read flaw was found in the Linux kernel\u0027s BPF subsystem in how a user calls the bpf_tail_call function with a key larger than the max_entries of the map. This flaw allows a local user to gain unauthorized access to data.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-2905"
    },
    {
      "cve": "CVE-2022-2959",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A race condition was found in the Linux kernel\u0027s watch queue due to a missing lock in pipe_resize_ring(). The specific flaw exists within the handling of pipe buffers. The issue results from the lack of proper locking when performing operations on an object. This flaw allows a local user to crash the system or escalate their privileges on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-2959"
    },
    {
      "cve": "CVE-2022-2978",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw use after free in the Linux kernel NILFS file system was found in the way user triggers function security_inode_alloc to fail with following call to function nilfs_mdt_destroy. A local user could use this flaw to crash the system or potentially escalate their privileges on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-2978"
    },
    {
      "cve": "CVE-2022-3028",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A race condition was found in the Linux kernel\u0027s IP framework for transforming packets (XFRM subsystem) when multiple calls to xfrm_probe_algs occurred simultaneously. This flaw could allow a local attacker to potentially trigger an out-of-bounds write or leak kernel heap memory by performing an out-of-bounds read and copying it into a socket.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-3028"
    },
    {
      "cve": "CVE-2022-3104",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel through 5.16-rc6. lkdtm_ARRAY_BOUNDS in drivers/misc/lkdtm/bugs.c lacks check of the return value of kmalloc() and will cause the null pointer dereference.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-3104"
    },
    {
      "cve": "CVE-2022-3115",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel through 5.16-rc6. malidp_crtc_reset in drivers/gpu/drm/arm/malidp_crtc.c lacks check of the return value of kzalloc() and will cause the null pointer dereference.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-3115"
    },
    {
      "cve": "CVE-2022-3169",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel. A denial of service flaw may occur if there is a consecutive request of the NVME_IOCTL_RESET and the NVME_IOCTL_SUBSYS_RESET through the device file of the driver, resulting in a PCIe link disconnect.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-3169"
    },
    {
      "cve": "CVE-2022-3303",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A race condition flaw was found in the Linux kernel sound subsystem due to improper locking. It could lead to a NULL pointer dereference while handling the SNDCTL_DSP_SYNC ioctl. A privileged local user (root or member of the audio group) could use this flaw to crash the system, resulting in a denial of service condition",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-3303"
    },
    {
      "cve": "CVE-2022-3521",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability has been found in Linux Kernel and classified as problematic. This vulnerability affects the function kcm_tx_work of the file net/kcm/kcmsock.c of the component kcm. The manipulation leads to race condition. It is recommended to apply a patch to fix this issue. VDB-211018 is the identifier assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 2.5,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-3521"
    },
    {
      "cve": "CVE-2022-3524",
      "cwe": {
        "id": "CWE-404",
        "name": "Improper Resource Shutdown or Release"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in Linux Kernel. It has been declared as problematic. Affected by this vulnerability is the function ipv6_renew_options of the component IPv6 Handler. The manipulation leads to memory leak. The attack can be launched remotely. It is recommended to apply a patch to fix this issue. The identifier VDB-211021 was assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-3524"
    },
    {
      "cve": "CVE-2022-3534",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability classified as critical has been found in Linux Kernel. Affected is the function btf_dump_name_dups of the file tools/lib/bpf/btf_dump.c of the component libbpf. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-211032.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-3534"
    },
    {
      "cve": "CVE-2022-3545",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability has been found in Linux Kernel and classified as critical. Affected by this vulnerability is the function area_cache_get of the file drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c of the component IPsec. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. The identifier VDB-211045 was assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-3545"
    },
    {
      "cve": "CVE-2022-3564",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability classified as critical was found in Linux Kernel. Affected by this vulnerability is the function l2cap_reassemble_sdu of the file net/bluetooth/l2cap_core.c of the component Bluetooth. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-211087.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:A/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-3564"
    },
    {
      "cve": "CVE-2022-3565",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability, which was classified as critical, has been found in Linux Kernel. Affected by this issue is the function del_timer of the file drivers/isdn/mISDN/l1oip_core.c of the component Bluetooth. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-211088.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-3565"
    },
    {
      "cve": "CVE-2022-3586",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel\u2019s networking code. A use-after-free was found in the way the sch_sfb enqueue function used the socket buffer (SKB) cb field after the same SKB had been enqueued (and freed) into a child qdisc. This flaw allows a local, unprivileged user to crash the system, causing a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-3586"
    },
    {
      "cve": "CVE-2022-3594",
      "cwe": {
        "id": "CWE-404",
        "name": "Improper Resource Shutdown or Release"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in Linux Kernel. It has been declared as problematic. Affected by this vulnerability is the function intr_callback of the file drivers/net/usb/r8152.c of the component BPF. The manipulation leads to logging of excessive data. The attack can be launched remotely. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-211363.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-3594"
    },
    {
      "cve": "CVE-2022-3606",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in Linux Kernel. It has been classified as problematic. This affects the function find_prog_by_sec_insn of the file tools/lib/bpf/libbpf.c of the component BPF. The manipulation leads to null pointer dereference. It is recommended to apply a patch to fix this issue. The identifier VDB-211749 was assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-3606"
    },
    {
      "cve": "CVE-2022-3621",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in Linux Kernel. It has been classified as problematic. Affected is the function nilfs_bmap_lookup_at_level of the file fs/nilfs2/inode.c of the component nilfs2. The manipulation leads to null pointer dereference. It is possible to launch the attack remotely. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-211920.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-3621"
    },
    {
      "cve": "CVE-2022-3625",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in Linux Kernel. It has been classified as critical. This affects the function devlink_param_set/devlink_param_get of the file net/core/devlink.c of the component IPsec. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. The identifier VDB-211929 was assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-3625"
    },
    {
      "cve": "CVE-2022-3628",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A buffer overflow flaw was found in the Linux kernel Broadcom Full MAC Wi-Fi driver. This issue occurs when a user connects to a malicious USB device. This can allow a local user to crash the system or escalate their privileges.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.6,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:P/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-3628"
    },
    {
      "cve": "CVE-2022-3629",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in Linux Kernel. It has been declared as problematic. This vulnerability affects the function vsock_connect of the file net/vmw_vsock/af_vsock.c. The manipulation leads to memory leak. It is recommended to apply a patch to fix this issue. VDB-211930 is the identifier assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-3629"
    },
    {
      "cve": "CVE-2022-3633",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability classified as problematic has been found in Linux Kernel. Affected is the function j1939_session_destroy of the file net/can/j1939/transport.c. The manipulation leads to memory leak. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-211932.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-3633"
    },
    {
      "cve": "CVE-2022-3635",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability, which was classified as critical, has been found in Linux Kernel. Affected by this issue is the function tst_timer of the file drivers/atm/idt77252.c of the component IPsec. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. VDB-211934 is the identifier assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-3635"
    },
    {
      "cve": "CVE-2022-3646",
      "cwe": {
        "id": "CWE-404",
        "name": "Improper Resource Shutdown or Release"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability, which was classified as problematic, has been found in Linux Kernel. This issue affects the function nilfs_attach_log_writer of the file fs/nilfs2/segment.c of the component BPF. The manipulation leads to memory leak. The attack may be initiated remotely. It is recommended to apply a patch to fix this issue. The identifier VDB-211961 was assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-3646"
    },
    {
      "cve": "CVE-2022-3649",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in Linux Kernel. It has been classified as problematic. Affected is the function nilfs_new_inode of the file fs/nilfs2/inode.c of the component BPF. The manipulation leads to use after free. It is possible to launch the attack remotely. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-211992.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-3649"
    },
    {
      "cve": "CVE-2022-4095",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free flaw was found in Linux kernel before 5.19.2. This issue occurs in cmd_hdl_filter in drivers/staging/rtl8712/rtl8712_cmd.c, allowing an attacker to launch a local denial of service attack and gain escalation of privileges.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-4095"
    },
    {
      "cve": "CVE-2022-4129",
      "cwe": {
        "id": "CWE-667",
        "name": "Improper Locking"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel\u0027s Layer 2 Tunneling Protocol (L2TP). A missing lock when clearing sk_user_data can lead to a race condition and NULL pointer dereference. A local user could use this flaw to potentially crash the system causing a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-4129"
    },
    {
      "cve": "CVE-2022-4139",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An incorrect TLB flush issue was found in the Linux kernel\u2019s GPU i915 kernel driver, potentially leading to random memory corruption or data leaks. This flaw could allow a local user to crash the system or escalate their privileges on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-4139"
    },
    {
      "cve": "CVE-2022-4269",
      "cwe": {
        "id": "CWE-833",
        "name": "Deadlock"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel Traffic Control (TC) subsystem. Using a specific networking configuration (redirecting egress packets to ingress using TC action \"mirred\") a local unprivileged user could trigger a CPU soft lockup (ABBA deadlock) when the transport protocol in use (TCP or SCTP) does a retransmission, resulting in a denial of service condition.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-4269"
    },
    {
      "cve": "CVE-2022-4304",
      "cwe": {
        "id": "CWE-326",
        "name": "Inadequate Encryption Strength"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A timing based side channel exists in the OpenSSL RSA Decryption implementation which could be sufficient to recover a plaintext across a network in a Bleichenbacher style attack. To achieve a successful decryption an attacker would have to be able to send a very large number of trial messages for decryption. The vulnerability affects all RSA padding modes: PKCS#1 v1.5, RSA-OEAP and RSASVE. For example, in a TLS connection, RSA is commonly used by a client to send an encrypted pre-master secret to the server. An attacker that had observed a genuine connection between a client and a server could use this flaw to send trial messages to the server and record the time taken to process them. After a sufficiently large number of messages the attacker could recover the pre-master secret used for the original connection and thus be able to decrypt the application data sent over that connection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-4304"
    },
    {
      "cve": "CVE-2022-4450",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The function PEM_read_bio_ex() reads a PEM file from a BIO and parses and decodes the \"name\" (e.g. \"CERTIFICATE\"), any header data and the payload data. If the function succeeds then the \"name_out\", \"header\" and \"data\" arguments are populated with pointers to buffers containing the relevant decoded data. The caller is responsible for freeing those buffers. It is possible to construct a PEM file that results in 0 bytes of payload data. In this case PEM_read_bio_ex() will return a failure code but will populate the header argument with a pointer to a buffer that has already been freed. If the caller also frees this buffer then a double free will occur. This will most likely lead to a crash. This could be exploited by an attacker who has the ability to supply malicious PEM files for parsing to achieve a denial of service attack. The functions PEM_read_bio() and PEM_read() are simple wrappers around PEM_read_bio_ex() and therefore these functions are also directly affected. These functions are also called indirectly by a number of other OpenSSL functions including PEM_X509_INFO_read_bio_ex() and SSL_CTX_use_serverinfo_file() which are also vulnerable. Some OpenSSL internal uses of these functions are not vulnerable because the caller does not free the header argument if PEM_read_bio_ex() returns a failure code. These locations include the PEM_read_bio_TYPE() functions as well as the decoders introduced in OpenSSL 3.0. The OpenSSL asn1parse command line application is also impacted by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-4450"
    },
    {
      "cve": "CVE-2022-4662",
      "cwe": {
        "id": "CWE-455",
        "name": "Non-exit on Failed Initialization"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw incorrect access control in the Linux kernel USB core subsystem was found in the way user attaches usb device. A local user could use this flaw to crash the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-4662"
    },
    {
      "cve": "CVE-2022-20421",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In binder_inc_ref_for_node of binder.c, there is a possible way to corrupt memory due to a use after free. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android kernelAndroid ID: A-239630375References: Upstream kernel",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-20421"
    },
    {
      "cve": "CVE-2022-20422",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In emulation_proc_handler of armv8_deprecated.c, there is a possible way to corrupt memory due to a race condition. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android kernelAndroid ID: A-237540956References: Upstream kernel",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-20422"
    },
    {
      "cve": "CVE-2022-20566",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In l2cap_chan_put of l2cap_core, there is a possible use after free due to improper locking. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android kernelAndroid ID: A-165329981References: Upstream kernel",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-20566"
    },
    {
      "cve": "CVE-2022-20572",
      "cwe": {
        "id": "CWE-863",
        "name": "Incorrect Authorization"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In verity_target of dm-verity-target.c, there is a possible way to modify read-only files due to a missing permission check. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android kernelAndroid ID: A-234475629References: Upstream kernel",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-20572"
    },
    {
      "cve": "CVE-2022-21123",
      "cwe": {
        "id": "CWE-459",
        "name": "Incomplete Cleanup"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Incomplete cleanup of multi-core shared buffers for some Intel(R) Processors may allow an authenticated user to potentially enable information disclosure via local access.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-21123"
    },
    {
      "cve": "CVE-2022-21125",
      "cwe": {
        "id": "CWE-459",
        "name": "Incomplete Cleanup"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Incomplete cleanup of microarchitectural fill buffers on some Intel(R) Processors may allow an authenticated user to potentially enable information disclosure via local access.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-21125"
    },
    {
      "cve": "CVE-2022-21166",
      "cwe": {
        "id": "CWE-459",
        "name": "Incomplete Cleanup"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Incomplete cleanup in specific special register write operations for some Intel(R) Processors may allow an authenticated user to potentially enable information disclosure via local access.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-21166"
    },
    {
      "cve": "CVE-2022-21505",
      "cwe": {
        "id": "CWE-305",
        "name": "Authentication Bypass by Primary Weakness"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A bug in the IMA subsystem was discovered which would incorrectly allow kexec to be used when kernel lockdown was enabled",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-21505"
    },
    {
      "cve": "CVE-2022-26373",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Non-transparent sharing of return predictor targets between contexts in some Intel(R) Processors may allow an authorized user to potentially enable information disclosure via local access.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-26373"
    },
    {
      "cve": "CVE-2022-32250",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "net/netfilter/nf_tables_api.c in the Linux kernel through 5.18.1 allows a local user (able to create user/net namespaces) to escalate privileges to root because an incorrect NFT_STATEFUL_EXPR check leads to a use-after-free.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-32250"
    },
    {
      "cve": "CVE-2022-32296",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The Linux kernel before 5.17.9 allows TCP servers to identify clients by observing what source ports are used. This occurs because of use of Algorithm 4 (\"Double-Hash Port Selection Algorithm\") of RFC 6056.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-32296"
    },
    {
      "cve": "CVE-2022-34918",
      "cwe": {
        "id": "CWE-843",
        "name": "Access of Resource Using Incompatible Type (\u0027Type Confusion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel through 5.18.9. A type confusion bug in nft_set_elem_init (leading to a buffer overflow) could be used by a local attacker to escalate privileges, a different vulnerability than CVE-2022-32250. (The attacker can obtain root access, but must start with an unprivileged user namespace to obtain CAP_NET_ADMIN access.) This can be fixed in nft_setelem_parse_data in net/netfilter/nf_tables_api.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-34918"
    },
    {
      "cve": "CVE-2022-36123",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The Linux kernel before 5.18.13 lacks a certain clear operation for the block starting symbol (.bss). This allows Xen PV guest OS users to cause a denial of service or gain privileges.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-36123"
    },
    {
      "cve": "CVE-2022-36280",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds(OOB) memory access vulnerability was found in vmwgfx driver in drivers/gpu/vmxgfx/vmxgfx_kms.c in GPU component in the Linux kernel with device file \u0027/dev/dri/renderD128 (or Dxxx)\u0027. This flaw allows a local attacker with a user account on the system to gain privilege, causing a denial of service(DoS).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-36280"
    },
    {
      "cve": "CVE-2022-36879",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel through 5.18.14. xfrm_expand_policies in net/xfrm/xfrm_policy.c can cause a refcount to be dropped twice.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-36879"
    },
    {
      "cve": "CVE-2022-36946",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nfqnl_mangle in net/netfilter/nfnetlink_queue.c in the Linux kernel through 5.18.14 allows remote attackers to cause a denial of service (panic) because, in the case of an nf_queue verdict with a one-byte nfta_payload attribute, an skb_pull can encounter a negative skb-\u003elen.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-36946"
    },
    {
      "cve": "CVE-2022-39188",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in include/asm-generic/tlb.h in the Linux kernel before 5.19. Because of a race condition (unmap_mapping_range versus munmap), a device driver can free a page while it still has stale TLB entries. This only occurs in situations with VM_PFNMAP VMAs.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-39188"
    },
    {
      "cve": "CVE-2022-39190",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in net/netfilter/nf_tables_api.c in the Linux kernel before 5.19.6. A denial of service can occur upon binding to an already bound chain.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-39190"
    },
    {
      "cve": "CVE-2022-40307",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel through 5.19.8. drivers/firmware/efi/capsule-loader.c has a race condition with a resultant use-after-free.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-40307"
    },
    {
      "cve": "CVE-2022-40768",
      "cwe": {
        "id": "CWE-668",
        "name": "Exposure of Resource to Wrong Sphere"
      },
      "notes": [
        {
          "category": "summary",
          "text": "drivers/scsi/stex.c in the Linux kernel through 5.19.9 allows local users to obtain sensitive information from kernel memory because stex_queuecommand_lck lacks a memset for the PASSTHRU_CMD case.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-40768"
    },
    {
      "cve": "CVE-2022-41218",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In drivers/media/dvb-core/dmxdev.c in the Linux kernel through 5.19.10, there is a use-after-free caused by refcount races, affecting dvb_demux_open and dvb_dmxdev_release.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-41218"
    },
    {
      "cve": "CVE-2022-41222",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "mm/mremap.c in the Linux kernel before 5.13.3 has a use-after-free via a stale TLB because an rmap lock is not held during a PUD move.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-41222"
    },
    {
      "cve": "CVE-2022-41674",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel before 5.19.16. Attackers able to inject WLAN frames could cause a buffer overflow in the ieee80211_bss_info_update function in net/mac80211/scan.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-41674"
    },
    {
      "cve": "CVE-2022-41849",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "drivers/video/fbdev/smscufx.c in the Linux kernel through 5.19.12 has a race condition and resultant use-after-free if a physically proximate attacker removes a USB device while calling open(), aka a race condition between ufx_ops_open and ufx_usb_disconnect.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.2,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:P/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-41849"
    },
    {
      "cve": "CVE-2022-41850",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "roccat_report_event in drivers/hid/hid-roccat.c in the Linux kernel through 5.19.12 has a race condition and resultant use-after-free in certain situations where a report is received while copying a report-\u003evalue is in progress.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-41850"
    },
    {
      "cve": "CVE-2022-42328",
      "cwe": {
        "id": "CWE-667",
        "name": "Improper Locking"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Guests can trigger deadlock in Linux netback driver [This CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] The patch for XSA-392 introduced another issue which might result in a deadlock when trying to free the SKB of a packet dropped due to the XSA-392 handling (CVE-2022-42328). Additionally when dropping packages for other reasons the same deadlock could occur in case of netpoll being active for the interface the xen-netback driver is connected to (CVE-2022-42329).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-42328"
    },
    {
      "cve": "CVE-2022-42329",
      "cwe": {
        "id": "CWE-667",
        "name": "Improper Locking"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Guests can trigger deadlock in Linux netback drive. The patch for XSA-392 introduced another issue which might result in a deadlock when trying to free the SKB of a packet dropped due to the XSA-392 handling (CVE-2022-42328). Additionally when dropping packages for other reasons the same deadlock could occur in case of netpoll being active for the interface the xen-netback driver is connected to (CVE-2022-42329).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-42329"
    },
    {
      "cve": "CVE-2022-42432",
      "cwe": {
        "id": "CWE-457",
        "name": "Use of Uninitialized Variable"
      },
      "notes": [
        {
          "category": "summary",
          "text": "This vulnerability allows local attackers to disclose sensitive information on affected installations of the Linux Kernel 6.0-rc2. An attacker must first obtain the ability to execute high-privileged code on the target system in order to exploit this vulnerability. The specific flaw exists within the nft_osf_eval function. The issue results from the lack of proper initialization of memory prior to accessing it. An attacker can leverage this in conjunction with other vulnerabilities to execute arbitrary code in the context of the kernel. Was ZDI-CAN-18540.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-42432"
    },
    {
      "cve": "CVE-2022-42703",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "mm/rmap.c in the Linux kernel before 5.19.7 has a use-after-free related to leaf anon_vma double reuse.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-42703"
    },
    {
      "cve": "CVE-2022-42719",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free in the mac80211 stack when parsing a multi-BSSID element in the Linux kernel 5.2 through 5.19.x before 5.19.16 could be used by attackers (able to inject WLAN frames) to crash the kernel and potentially execute code.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-42719"
    },
    {
      "cve": "CVE-2022-42720",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Various refcounting bugs in the multi-BSS handling in the mac80211 stack in the Linux kernel 5.1 through 5.19.x before 5.19.16 could be used by local attackers (able to inject WLAN frames) to trigger use-after-free conditions to potentially execute code.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-42720"
    },
    {
      "cve": "CVE-2022-42721",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A list management bug in BSS handling in the mac80211 stack in the Linux kernel 5.1 through 5.19.x before 5.19.16 could be used by local attackers (able to inject WLAN frames) to corrupt a linked list and, in turn, potentially execute code.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-42721"
    },
    {
      "cve": "CVE-2022-42722",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel 5.8 through 5.19.x before 5.19.16, local attackers able to inject WLAN frames into the mac80211 stack could cause a NULL pointer dereference denial-of-service attack against the beacon protection of P2P devices.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-42722"
    },
    {
      "cve": "CVE-2022-42895",
      "cwe": {
        "id": "CWE-824",
        "name": "Access of Uninitialized Pointer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is an infoleak vulnerability in the Linux kernel\u0027s net/bluetooth/l2cap_core.c\u0027s l2cap_parse_conf_req function which can be used to leak kernel pointers remotely. We recommend upgrading past commit https://github.com/torvalds/linux/commit/b1a2cd50c0357f243b7435a732b4e62ba3157a2e",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-42895"
    },
    {
      "cve": "CVE-2022-42896",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There are use-after-free vulnerabilities in the Linux kernel\u0027s net/bluetooth/l2cap_core.c\u0027s l2cap_connect and l2cap_le_connect_req functions which may allow code execution and leaking kernel memory (respectively) remotely via Bluetooth. A remote attacker could execute code leaking kernel memory via Bluetooth if within proximity of the victim. We recommend upgrading past commit https://github.com/torvalds/linux/commit/711f8c3fb3db61897080468586b970c87c61d9e4",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-42896"
    },
    {
      "cve": "CVE-2022-43750",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "drivers/usb/mon/mon_bin.c in usbmon in the Linux kernel before 5.19.15 and 6.x before 6.0.1 allows a user-space client to corrupt the monitor\u0027s internal memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-43750"
    },
    {
      "cve": "CVE-2022-47518",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel before 6.0.11. Missing validation of the number of channels in drivers/net/wireless/microchip/wilc1000/cfg80211.c in the WILC1000 wireless driver can trigger a heap-based buffer overflow when copying the list of operating channels from Wi-Fi management frames.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-47518"
    },
    {
      "cve": "CVE-2022-47520",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel before 6.0.11. Missing offset validation in drivers/net/wireless/microchip/wilc1000/hif.c in the WILC1000 wireless driver can trigger an out-of-bounds read when parsing a Robust Security Network (RSN) information element from a Netlink packet.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-47520"
    },
    {
      "cve": "CVE-2022-47929",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel before 6.1.6, a NULL pointer dereference bug in the traffic control subsystem allows an unprivileged user to trigger a denial of service (system crash) via a crafted traffic control configuration that is set up with \"tc qdisc\" and \"tc class\" commands. This affects qdisc_graft in net/sched/sch_api.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-47929"
    },
    {
      "cve": "CVE-2022-47946",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel 5.10.x before 5.10.155. A use-after-free in io_sqpoll_wait_sq in fs/io_uring.c allows an attacker to crash the kernel, resulting in denial of service. finish_wait can be skipped. An attack can occur in some situations by forking a process and then quickly terminating it. NOTE: later kernel versions, such as the 5.15 longterm series, substantially changed the implementation of io_sqpoll_wait_sq.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-47946"
    },
    {
      "cve": "CVE-2023-0215",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The public API function BIO_new_NDEF is a helper function used for streaming ASN.1 data via a BIO. It is primarily used internally to OpenSSL to support the SMIME, CMS and PKCS7 streaming capabilities, but may also be called directly by end user applications. The function receives a BIO from the caller, prepends a new BIO_f_asn1 filter BIO onto the front of it to form a BIO chain, and then returns the new head of the BIO chain to the caller. Under certain conditions, for example if a CMS recipient public key is invalid, the new filter BIO is freed and the function returns a NULL result indicating a failure. However, in this case, the BIO chain is not properly cleaned up and the BIO passed by the caller still retains internal pointers to the previously freed filter BIO. If the caller then goes on to call BIO_pop() on the BIO then a use-after-free will occur. This will most likely result in a crash. This scenario occurs directly in the internal function B64_write_ASN1() which may cause BIO_new_NDEF() to be called and will subsequently call BIO_pop() on the BIO. This internal function is in turn called by the public API functions PEM_write_bio_ASN1_stream, PEM_write_bio_CMS_stream, PEM_write_bio_PKCS7_stream, SMIME_write_ASN1, SMIME_write_CMS and SMIME_write_PKCS7. Other public API functions that may be impacted by this include i2d_ASN1_bio_stream, BIO_new_CMS, BIO_new_PKCS7, i2d_CMS_bio_stream and i2d_PKCS7_bio_stream. The OpenSSL cms and smime command line applications are similarly affected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-0215"
    },
    {
      "cve": "CVE-2023-0286",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a type confusion vulnerability relating to X.400 address processing inside an X.509 GeneralName. X.400 addresses were parsed as an ASN1_STRING but the public structure definition for GENERAL_NAME incorrectly specified the type of the x400Address field as ASN1_TYPE. This field is subsequently interpreted by the OpenSSL function GENERAL_NAME_cmp as an ASN1_TYPE rather than an ASN1_STRING. When CRL checking is enabled (i.e. the application sets the X509_V_FLAG_CRL_CHECK flag), this vulnerability may allow an attacker to pass arbitrary pointers to a memcmp call, enabling them to read memory contents or enact a denial of service. In most cases, the attack requires the attacker to provide both the certificate chain and CRL, neither of which need to have a valid signature. If the attacker only controls one of these inputs, the other input must already contain an X.400 address as a CRL distribution point, which is uncommon. As such, this vulnerability is most likely to only affect applications which have implemented their own functionality for retrieving CRLs over a network.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-0286"
    },
    {
      "cve": "CVE-2023-0464",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A security vulnerability has been identified in all supported versions of OpenSSL related to the verification of X.509 certificate chains that include policy constraints. Attackers may be able to exploit this vulnerability by creating a malicious certificate chain that triggers exponential use of computational resources, leading to a denial-of-service (DoS) attack on affected systems.\r\n\r\nPolicy processing is disabled by default but can be enabled by passing the `-policy` argument to the command line utilities or by calling the `X509_VERIFY_PARAM_set1_policies()` function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-0464"
    },
    {
      "cve": "CVE-2023-0465",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Applications that use a non-default option when verifying certificates may be\r\nvulnerable to an attack from a malicious CA to circumvent certain checks.\r\n\r\nInvalid certificate policies in leaf certificates are silently ignored by\r\nOpenSSL and other certificate policy checks are skipped for that certificate.\r\nA malicious CA could use this to deliberately assert invalid certificate policies\r\nin order to circumvent policy checking on the certificate altogether.\r\n\r\nPolicy processing is disabled by default but can be enabled by passing\r\nthe `-policy` argument to the command line utilities or by calling the\r\n`X509_VERIFY_PARAM_set1_policies()` function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-0465"
    },
    {
      "cve": "CVE-2023-0466",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The function X509_VERIFY_PARAM_add0_policy() is documented to\nimplicitly enable the certificate policy check when doing certificate\nverification. However the implementation of the function does not\nenable the check which allows certificates with invalid or incorrect\npolicies to pass the certificate verification.\n\nAs suddenly enabling the policy check could break existing deployments it was\ndecided to keep the existing behavior of the X509_VERIFY_PARAM_add0_policy()\nfunction.\n\nInstead the applications that require OpenSSL to perform certificate\npolicy check need to use X509_VERIFY_PARAM_set1_policies() or explicitly\nenable the policy check by calling X509_VERIFY_PARAM_set_flags() with\nthe X509_V_FLAG_POLICY_CHECK flag argument.\n\nCertificate policy checks are disabled by default in OpenSSL and are not\ncommonly used by applications.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-0466"
    },
    {
      "cve": "CVE-2023-0590",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free flaw was found in qdisc_graft in net/sched/sch_api.c in the Linux Kernel due to a race problem. This flaw leads to a denial of service issue. If patch ebda44da44f6 (\"net: sched: fix race condition in qdisc_graft()\") not applied yet, then kernel could be affected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-0590"
    },
    {
      "cve": "CVE-2023-1077",
      "cwe": {
        "id": "CWE-843",
        "name": "Access of Resource Using Incompatible Type (\u0027Type Confusion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, pick_next_rt_entity() may return a type confused entry, not detected by the BUG_ON condition, as the confused entry will not be NULL, but list_head.The buggy error condition would lead to a type confused entry with the list head,which would then be used as a type confused sched_rt_entity,causing memory corruption.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-1077"
    },
    {
      "cve": "CVE-2023-1095",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In nf_tables_updtable, if nf_tables_table_enable returns an error, nft_trans_destroy is called to free the transaction object. nft_trans_destroy() calls list_del(), but the transaction was never placed on a list -- the list head is all zeroes, this results in a NULL pointer dereference.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-1095"
    },
    {
      "cve": "CVE-2023-1206",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A hash collision flaw was found in the IPv6 connection lookup table in the Linux kernel\u2019s IPv6 functionality when a user makes a new kind of SYN flood attack. A user located in the local network or with a high bandwidth connection can increase the CPU usage of the server that accepts IPV6 connections up to 95%.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-1206"
    },
    {
      "cve": "CVE-2023-2898",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a null-pointer-dereference flaw found in f2fs_write_end_io in fs/f2fs/data.c in the Linux kernel. This flaw allows a local privileged user to cause a denial of service problem.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-2898"
    },
    {
      "cve": "CVE-2023-3141",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free flaw was found in r592_remove in drivers/memstick/host/r592.c in media access in the Linux Kernel. This flaw allows a local attacker to crash the system at device disconnect, possibly leading to a kernel information leak.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-3141"
    },
    {
      "cve": "CVE-2023-3268",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out of bounds (OOB) memory access flaw was found in the Linux kernel in relay_file_read_start_pos in kernel/relay.c in the relayfs. This flaw could allow a local attacker to crash the system or leak kernel internal information.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-3268"
    },
    {
      "cve": "CVE-2023-3338",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A null pointer dereference flaw was found in the Linux kernel\u0027s DECnet networking protocol. This issue could allow a remote user to crash the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-3338"
    },
    {
      "cve": "CVE-2023-3389",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux Kernel io_uring subsystem can be exploited to achieve local privilege escalation. Racing a io_uring cancel poll request with a linked timeout can cause a UAF in a hrtimer.\r\n\r\nWe recommend upgrading past commit `ef7dfac51d8ed961b742218f526bd589f3900a59`  \r\n(`4716c73b188566865bdd79c3a6709696a224ac04` for 5.10 stable and   \r\n`0e388fce7aec40992eadee654193cad345d62663` for 5.15 stable).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-3389"
    },
    {
      "cve": "CVE-2023-3446",
      "cwe": {
        "id": "CWE-1333",
        "name": "Inefficient Regular Expression Complexity"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. One of those checks confirms that the modulus (\u0027p\u0027 parameter) is not too large. Trying to use a very large modulus is slow and OpenSSL will not normally use a modulus which is over 10,000 bits in length. However the DH_check() function checks numerous aspects of the key or parameters that have been supplied. Some of those checks use the supplied modulus value even if it has already been found to be too large. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulernable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the \u0027-check\u0027 option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-3446"
    },
    {
      "cve": "CVE-2023-3609",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s net/sched: cls_u32 component can be exploited to achieve local privilege escalation.\r\n\r\nIf tcf_change_indev() fails, u32_set_parms() will immediately return an error after incrementing or decrementing the reference counter in tcf_bind_filter(). If an attacker can control the reference counter and set it to zero, they can cause the reference to be freed, leading to a use-after-free vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-3609"
    },
    {
      "cve": "CVE-2023-3610",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s netfilter: nf_tables component can be exploited to achieve local privilege escalation.\r\n\r\nFlaw in the error handling of bound chains causes a use-after-free in the abort path of NFT_MSG_NEWRULE. The vulnerability requires CAP_NET_ADMIN to be triggered.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-3610"
    },
    {
      "cve": "CVE-2023-3611",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds write vulnerability in the Linux kernel\u0027s net/sched: sch_qfq component can be exploited to achieve local privilege escalation.\r\n\r\nThe qfq_change_agg() function in net/sched/sch_qfq.c allows an out-of-bounds write because lmax is updated according to packet sizes without bounds checks.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-3611"
    },
    {
      "cve": "CVE-2023-3772",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel\u0027s IP framework for transforming packets (XFRM subsystem). This issue may allow a malicious user with CAP_NET_ADMIN privileges to directly dereference a NULL pointer in xfrm_update_ae_params(), leading to a possible kernel crash and denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-3772"
    },
    {
      "cve": "CVE-2023-3773",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel\u0027s IP framework for transforming packets (XFRM subsystem). This issue may allow a malicious user with CAP_NET_ADMIN privileges to cause a 4 byte out-of-bounds read of XFRMA_MTIMER_THRESH when parsing netlink attributes, leading to potential leakage of sensitive heap data to userspace.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-3773"
    },
    {
      "cve": "CVE-2023-3777",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s netfilter: nf_tables component can be exploited to achieve local privilege escalation.\n\nWhen nf_tables_delrule() is flushing table rules, it is not checked whether the chain is bound and the chain\u0027s owner rule can also release the objects in certain circumstances.\n\nWe recommend upgrading past commit 6eaf41e87a223ae6f8e7a28d6e78384ad7e407f8.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-3777"
    },
    {
      "cve": "CVE-2023-4004",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free flaw was found in the Linux kernel\u0027s netfilter in the way a user triggers the nft_pipapo_remove function with the element, without a NFT_SET_EXT_KEY_END. This issue could allow a local user to crash the system or potentially escalate their privileges on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-4004"
    },
    {
      "cve": "CVE-2023-4015",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The netfilter subsystem in the Linux kernel did not properly handle bound chain deactivation in certain circumstances. A local attacker could possibly use this to cause a denial of service (system crash) or execute arbitrary code.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-4015"
    },
    {
      "cve": "CVE-2023-4273",
      "cwe": {
        "id": "CWE-121",
        "name": "Stack-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "This vulnerability exists in the implementation of the file name reconstruction function, which is responsible for reading file name entries from a directory index and merging file name parts belonging to one file into a single long file name. Since the file name characters are copied into a stack variable, a local privileged attacker could use this vulnerability to overflow the kernel stack.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.0,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-4273"
    },
    {
      "cve": "CVE-2023-4623",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s net/sched: sch_hfsc (HFSC qdisc traffic control) component can be exploited to achieve local privilege escalation.\n\nIf a class with a link-sharing curve (i.e. with the HFSC_FSC flag set) has a parent without a link-sharing curve, then init_vf() will call vttree_insert() on the parent, but vttree_remove() will be skipped in update_vf(). This leaves a dangling pointer that can cause a use-after-free.\n\nWe recommend upgrading past commit b3d26c5702c7d6c45456326e56d2ccf3f103e60f.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-4623"
    },
    {
      "cve": "CVE-2023-4911",
      "cwe": {
        "id": "CWE-121",
        "name": "Stack-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A buffer overflow was discovered in the GNU C Library\u0027s dynamic loader ld.so while processing the GLIBC_TUNABLES environment variable. This issue could allow a local attacker to use maliciously crafted GLIBC_TUNABLES environment variables when launching binaries with SUID permission to execute code with elevated privileges.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-4911"
    },
    {
      "cve": "CVE-2023-4921",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s net/sched: sch_qfq component can be exploited to achieve local privilege escalation.\n\nWhen the plug qdisc is used as a class of the qfq qdisc, sending network packets triggers use-after-free in qfq_dequeue() due to the incorrect .peek handler of sch_plug and lack of error checking in agg_dequeue().\n\nWe recommend upgrading past commit 8fc134fee27f2263988ae38920bc03da416b03d8.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-4921"
    },
    {
      "cve": "CVE-2023-5178",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability was found in drivers/nvme/target/tcp.c` in `nvmet_tcp_free_crypto` due to a logical bug in the NVMe-oF/TCP subsystem in the Linux kernel. This issue may allow a malicious local privileged user to cause a use-after-free and double-free problem, which may permit remote code execution or lead to local privilege escalation problem.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-5178"
    },
    {
      "cve": "CVE-2023-5197",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s netfilter: nf_tables component can be exploited to achieve local privilege escalation.\r\n\r\nAddition and removal of rules from chain bindings within the same transaction causes leads to use-after-free.\r\n\r\nWe recommend upgrading past commit f15f29fd4779be8a418b66e9d52979bb6d6c2325.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-5197"
    },
    {
      "cve": "CVE-2023-5678",
      "cwe": {
        "id": "CWE-754",
        "name": "Improper Check for Unusual or Exceptional Conditions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Generating excessively long X9.42 DH keys or checking excessively long X9.42 DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_generate_key() to generate an X9.42 DH key may experience long delays. Likewise, applications that use DH_check_pub_key(), DH_check_pub_key_ex() or EVP_PKEY_public_check() to check an X9.42 DH key or X9.42 DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. While DH_check() performs all the necessary checks (as of CVE-2023-3817), DH_check_pub_key() doesn\u0027t make any of these checks, and is therefore vulnerable for excessively large P and Q parameters. Likewise, while DH_generate_key() performs a check for an excessively large P, it doesn\u0027t check for an excessively large Q. An application that calls DH_generate_key() or DH_check_pub_key() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. DH_generate_key() and DH_check_pub_key() are also called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_pub_key_ex(), EVP_PKEY_public_check(), and EVP_PKEY_generate(). Also vulnerable are the OpenSSL pkey command line application when using the \"-pubcheck\" option, as well as the OpenSSL genpkey command line application. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-5678"
    },
    {
      "cve": "CVE-2023-5717",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A heap out-of-bounds write vulnerability in the Linux kernel\u0027s Linux Kernel Performance Events (perf) component can be exploited to achieve local privilege escalation.\r\n\r\nIf perf_read_group() is called while an event\u0027s sibling_list is smaller than its child\u0027s sibling_list, it can increment or write to memory locations outside of the allocated buffer.\r\n\r\nWe recommend upgrading past commit 32671e3799ca2e4590773fd0e63aaa4229e50c06.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-5717"
    },
    {
      "cve": "CVE-2023-6606",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds read vulnerability was found in smbCalcSize in fs/smb/client/netmisc.c in the Linux Kernel. This issue could allow a local attacker to crash the system or leak internal kernel information.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-6606"
    },
    {
      "cve": "CVE-2023-6931",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A heap out-of-bounds write vulnerability in the Linux kernel\u0027s Performance Events system component can be exploited to achieve local privilege escalation.\n\nA perf_event\u0027s read_size can overflow, leading to an heap out-of-bounds increment or write in perf_read_group().\n\nWe recommend upgrading past commit 382c27f4ed28f803b1f1473ac2d8db0afc795a1b.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-6931"
    },
    {
      "cve": "CVE-2023-6932",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s ipv4: igmp component can be exploited to achieve local privilege escalation.\n\nA race condition can be exploited to cause a timer be mistakenly registered on a RCU read locked object which is freed by another thread.\n\nWe recommend upgrading past commit e2b706c691905fe78468c361aaabc719d0a496f1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-6932"
    },
    {
      "cve": "CVE-2023-7008",
      "cwe": {
        "id": "CWE-300",
        "name": "Channel Accessible by Non-Endpoint"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in systemd-resolved. This issue may allow systemd-resolved to accept records of DNSSEC-signed domains even when they have no signature, allowing man-in-the-middles (or the upstream DNS resolver) to manipulate records.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-7008"
    },
    {
      "cve": "CVE-2023-7104",
      "cwe": {
        "id": "CWE-122",
        "name": "Heap-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in SQLite SQLite3 up to 3.43.0 and classified as critical. This issue affects the function sessionReadRecord of the file ext/session/sqlite3session.c of the component make alltest Handler. The manipulation leads to heap-based buffer overflow. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-248999.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-7104"
    },
    {
      "cve": "CVE-2023-23454",
      "cwe": {
        "id": "CWE-843",
        "name": "Access of Resource Using Incompatible Type (\u0027Type Confusion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "cbq_classify in net/sched/sch_cbq.c in the Linux kernel through 6.1.4 allows attackers to cause a denial of service (slab-out-of-bounds read) because of type confusion (non-negative numbers can sometimes indicate a TC_ACT_SHOT condition rather than valid classification results).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-23454"
    },
    {
      "cve": "CVE-2023-23455",
      "cwe": {
        "id": "CWE-843",
        "name": "Access of Resource Using Incompatible Type (\u0027Type Confusion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "atm_tc_enqueue in net/sched/sch_atm.c in the Linux kernel through 6.1.4 allows attackers to cause a denial of service because of type confusion (non-negative numbers can sometimes indicate a TC_ACT_SHOT condition rather than valid classification results).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-23455"
    },
    {
      "cve": "CVE-2023-23559",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In rndis_query_oid in drivers/net/wireless/rndis_wlan.c in the Linux kernel through 6.1.5, there is an integer overflow in an addition.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-23559"
    },
    {
      "cve": "CVE-2023-26607",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel 6.0.8, there is an out-of-bounds read in ntfs_attr_find in fs/ntfs/attrib.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-26607"
    },
    {
      "cve": "CVE-2023-31085",
      "cwe": {
        "id": "CWE-369",
        "name": "Divide By Zero"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in drivers/mtd/ubi/cdev.c in the Linux kernel 6.2. There is a divide-by-zero error in do_div(sz,mtd-\u003eerasesize), used indirectly by ctrl_cdev_ioctl, when mtd-\u003eerasesize is 0.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-31085"
    },
    {
      "cve": "CVE-2023-31436",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "qfq_change_class in net/sched/sch_qfq.c in the Linux kernel before 6.2.13 allows an out-of-bounds write because lmax can exceed QFQ_MIN_LMAX.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-31436"
    },
    {
      "cve": "CVE-2023-32233",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel through 6.3.1, a use-after-free in Netfilter nf_tables when processing batch requests can be abused to perform arbitrary read and write operations on kernel memory. Unprivileged local users can obtain root privileges. This occurs because anonymous sets are mishandled.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-32233"
    },
    {
      "cve": "CVE-2023-35001",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Linux Kernel nftables Out-Of-Bounds Read/Write Vulnerability; nft_byteorder poorly handled vm register contents when CAP_NET_ADMIN is in any user or network namespace",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-35001"
    },
    {
      "cve": "CVE-2023-35827",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel through 6.3.8. A use-after-free was found in ravb_remove in drivers/net/ethernet/renesas/ravb_main.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-35827"
    },
    {
      "cve": "CVE-2023-36660",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The OCB feature in libnettle in Nettle 3.9 before 3.9.1 allows memory corruption.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-36660"
    },
    {
      "cve": "CVE-2023-37453",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the USB subsystem in the Linux kernel through 6.4.2. There is an out-of-bounds and crash in read_descriptors in drivers/usb/core/sysfs.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.6,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:P/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-37453"
    },
    {
      "cve": "CVE-2023-39189",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Netfilter subsystem in the Linux kernel. The nfnl_osf_add_callback function did not validate the user mode controlled opt_num field. This flaw allows a local privileged (CAP_NET_ADMIN) attacker to trigger an out-of-bounds read, leading to a crash or information disclosure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-39189"
    },
    {
      "cve": "CVE-2023-39192",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Netfilter subsystem in the Linux kernel. The xt_u32 module did not validate the fields in the xt_u32 structure. This flaw allows a local privileged attacker to trigger an out-of-bounds read by setting the size fields with a value beyond the array boundaries, leading to a crash or information disclosure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:C/C:H/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-39192"
    },
    {
      "cve": "CVE-2023-39193",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Netfilter subsystem in the Linux kernel. The sctp_mt_check did not validate the flag_count field. This flaw allows a local privileged (CAP_NET_ADMIN) attacker to trigger an out-of-bounds read, leading to a crash or information disclosure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-39193"
    },
    {
      "cve": "CVE-2023-39194",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the XFRM subsystem in the Linux kernel. The specific flaw exists within the processing of state filters, which can result in a read past the end of an allocated buffer. This flaw allows a local privileged (CAP_NET_ADMIN) attacker to trigger an out-of-bounds read, potentially leading to an information disclosure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.2,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:C/C:L/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-39194"
    },
    {
      "cve": "CVE-2023-42753",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An array indexing vulnerability was found in the netfilter subsystem of the Linux kernel. A missing macro could lead to a miscalculation of the `h-\u003enets` array offset, providing attackers with the primitive to arbitrarily increment/decrement a memory buffer out-of-bound. This issue may allow a local user to crash the system or potentially escalate their privileges on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-42753"
    },
    {
      "cve": "CVE-2023-42754",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer dereference flaw was found in the Linux kernel ipv4 stack. The socket buffer (skb) was assumed to be associated with a device before calling __ip_options_compile, which is not always the case if the skb is re-routed by ipvs. This issue may allow a local user with CAP_NET_ADMIN privileges to crash the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-42754"
    },
    {
      "cve": "CVE-2023-42755",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the IPv4 Resource Reservation Protocol (RSVP) classifier in the Linux kernel. The xprt pointer may go beyond the linear part of the skb, leading to an out-of-bounds read in the `rsvp_classify` function. This issue may allow a local user to crash the system and cause a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-42755"
    },
    {
      "cve": "CVE-2023-45863",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in lib/kobject.c in the Linux kernel before 6.2.3. With root access, an attacker can trigger a race condition that results in a fill_kobj_path out-of-bounds write.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-45863"
    },
    {
      "cve": "CVE-2023-45871",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in drivers/net/ethernet/intel/igb/igb_main.c in the IGB driver in the Linux kernel before 6.5.3. A buffer size may not be adequate for frames larger than the MTU.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-45871"
    },
    {
      "cve": "CVE-2023-48795",
      "cwe": {
        "id": "CWE-222",
        "name": "Truncation of Security-relevant Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The SSH transport protocol with certain OpenSSH extensions, found in OpenSSH before 9.6 and other products, allows remote attackers to bypass integrity checks such that some packets are omitted (from the extension negotiation message), and a client and server may consequently end up with a connection for which some security features have been downgraded or disabled, aka a Terrapin attack. This occurs because the SSH Binary Packet Protocol (BPP), implemented by these extensions, mishandles the handshake phase and mishandles use of sequence numbers. For example, there is an effective attack against SSH\u0027s use of ChaCha20-Poly1305 (and CBC with Encrypt-then-MAC). The bypass occurs in chacha20-poly1305@openssh.com and (if CBC is used) the -etm@openssh.com MAC algorithms. This also affects Maverick Synergy Java SSH API before 3.1.0-SNAPSHOT, Dropbear through 2022.83, Ssh before 5.1.1 in Erlang/OTP, PuTTY before 0.80, AsyncSSH before 2.14.2, golang.org/x/crypto before 0.17.0, libssh before 0.10.6, libssh2 through 1.11.0, Thorn Tech SFTP Gateway before 3.4.6, Tera Term before 5.1, Paramiko before 3.4.0, jsch before 0.2.15, SFTPGo before 2.5.6, Netgate pfSense Plus through 23.09.1, Netgate pfSense CE through 2.7.2, HPN-SSH through 18.2.0, ProFTPD before 1.3.8b (and before1.3.9rc2), ORYX CycloneSSH before 2.3.4, NetSarang XShell 7 before Build 0144, CrushFTP before 10.6.0, ConnectBot SSH library before 2.2.22, Apache MINA sshd through 2.11.0, sshj through 0.37.0, TinySSH through 20230101, trilead-ssh2 6401, the net-ssh gem 7.2.0 for Ruby, the mscdex ssh2 module before 1.15.0 for Node.js, the thrussh library before 0.35.1 for Rust, and the Russh crate before 0.40.2 for Rust; and there could be effects on Bitvise SSH through 9.31.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-48795"
    },
    {
      "cve": "CVE-2023-50495",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "NCurse v6.4-20230418 was discovered to contain a segmentation fault via the component _nc_wrap_entry().",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-50495"
    },
    {
      "cve": "CVE-2023-51384",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In ssh-agent in OpenSSH before 9.6, certain destination constraints can be incompletely applied. When destination constraints are specified during addition of PKCS#11-hosted private keys, these constraints are only applied to the first key, even if a PKCS#11 token returns multiple keys.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-51384"
    },
    {
      "cve": "CVE-2023-51385",
      "cwe": {
        "id": "CWE-78",
        "name": "Improper Neutralization of Special Elements used in an OS Command (\u0027OS Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In ssh in OpenSSH before 9.6, OS command injection might occur if a user name or host name has shell metacharacters, and this name is referenced by an expansion token in certain situations. For example, an untrusted Git repository can have a submodule with shell metacharacters in a user name or host name.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-51385"
    },
    {
      "cve": "CVE-2023-51767",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "OpenSSH through 9.6, when common types of DRAM are used, might allow row hammer attacks (for authentication bypass) because the integer value of authenticated in mm_answer_authpassword does not resist flips of a single bit. NOTE: this is applicable to a certain threat model of attacker-victim co-location in which the attacker has user privileges.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-51767"
    },
    {
      "cve": "CVE-2024-0232",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A heap use-after-free issue has been identified in SQLite in the jsonParseAddNodeArray() function in sqlite3.c. This flaw allows a local attacker to leverage a victim to pass specially crafted malicious input to the application, potentially causing a crash and leading to a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2024-0232"
    },
    {
      "cve": "CVE-2024-0553",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in GnuTLS. The response times to malformed ciphertexts in RSA-PSK ClientKeyExchange differ from the response times of ciphertexts with correct PKCS#1 v1.5 padding. This issue may allow a remote attacker to perform a timing side-channel attack in the RSA-PSK key exchange, potentially leading to the leakage of sensitive data. CVE-2024-0553 is designated as an incomplete resolution for CVE-2023-5981.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2024-0553"
    },
    {
      "cve": "CVE-2024-0567",
      "cwe": {
        "id": "CWE-347",
        "name": "Improper Verification of Cryptographic Signature"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in GnuTLS, where a cockpit (which uses gnuTLS) rejects a certificate chain with distributed trust. This issue occurs when validating a certificate chain with cockpit-certificate-ensure. This flaw allows an unauthenticated, remote client or attacker to initiate a denial of service attack.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2024-0567"
    },
    {
      "cve": "CVE-2024-0584",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free issue was found in igmp_start_timer in net/ipv4/igmp.c in the network sub-component in the Linux Kernel. This flaw allows a local user to observe a refcnt use-after-free issue when receiving an igmp query packet, leading to a kernel information leak.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2024-0584"
    },
    {
      "cve": "CVE-2024-0684",
      "cwe": {
        "id": "CWE-122",
        "name": "Heap-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the GNU coreutils \"split\" program. A heap overflow with user-controlled data of multiple hundred bytes in length could occur in the line_bytes_split() function, potentially leading to an application crash and denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2024-0684"
    },
    {
      "cve": "CVE-2024-22365",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "linux-pam (aka Linux PAM) before 1.6.0 allows attackers to cause a denial of service (blocked login process) via mkfifo because the openat call (for protect_dir) lacks O_DIRECTORY.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2024-22365"
    },
    {
      "cve": "CVE-2024-25062",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.11.7 and 2.12.x before 2.12.5. When using the XML Reader interface with DTD validation and XInclude expansion enabled, processing crafted XML documents can lead to an xmlValidatePopElement use-after-free.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.1 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109827684/"
        },
        {
          "category": "workaround",
          "details": "Only build and run applications from trusted sources",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2024-25062"
    }
  ]
}

{
  "document": {
    "acknowledgments": [
      {
        "organization": "Siemens ProductCERT",
        "summary": "reporting these vulnerabilities to CISA."
      }
    ],
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Disclosure is not limited",
      "tlp": {
        "label": "WHITE",
        "url": "https://us-cert.cisa.gov/tlp/"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "SIMATIC CP 1542SP-1 and CP 1543SP-1 before V2.3 are affected by multiple vulnerabilities in third-party components and the integrated web server.\n\nSiemens has released new versions for the affected products and recommends to update to the latest versions.",
        "title": "Summary"
      },
      {
        "category": "general",
        "text": "As a general security measure, Siemens strongly recommends to protect network access to devices with appropriate mechanisms. In order to operate the devices in a protected IT environment, Siemens recommends to configure the environment according to Siemens\u0027 operational guidelines for Industrial Security (Download: \nhttps://www.siemens.com/cert/operational-guidelines-industrial-security), and to follow the recommendations in the product manuals.\nAdditional information on Industrial Security by Siemens can be found at: https://www.siemens.com/industrialsecurity",
        "title": "General Recommendations"
      },
      {
        "category": "general",
        "text": "For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories",
        "title": "Additional Resources"
      },
      {
        "category": "legal_disclaimer",
        "text": "Siemens Security Advisories are subject to the terms and conditions contained in Siemens\u0027 underlying license terms or other applicable agreements previously agreed to with Siemens (hereinafter \"License Terms\"). To the extent applicable to information, software or documentation made available in or through a Siemens Security Advisory, the Terms of Use of Siemens\u0027 Global Website (https://www.siemens.com/terms_of_use, hereinafter \"Terms of Use\"), in particular Sections 8-10 of the Terms of Use, shall apply additionally. In case of conflicts, the License Terms shall prevail over the Terms of Use.",
        "title": "Terms of Use"
      },
      {
        "category": "legal_disclaimer",
        "text": "All information products included in https://us-cert.cisa.gov/ics are provided \"as is\" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see https://us-cert.cisa.gov/tlp/.",
        "title": "Legal Notice"
      },
      {
        "category": "other",
        "text": "This CISA CSAF advisory was converted from Siemens ProductCERT\u0027s CSAF advisory.",
        "title": "Advisory Conversion Disclaimer"
      },
      {
        "category": "other",
        "text": "Multiple",
        "title": "Critical infrastructure sectors"
      },
      {
        "category": "other",
        "text": "Worldwide",
        "title": "Countries/areas deployed"
      },
      {
        "category": "other",
        "text": "Germany",
        "title": "Company headquarters location"
      },
      {
        "category": "general",
        "text": "CISA recommends users take defensive measures to minimize the exploitation risk of this vulnerability.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Minimize network exposure for all control system devices and/or systems, and ensure they are not accessible from the internet.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Locate control system networks and remote devices behind firewalls and isolate them from business networks.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "When remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most recent version available. Also recognize VPN is only as secure as its connected devices.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets. Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.",
        "title": "Recommended Practices"
      }
    ],
    "publisher": {
      "category": "other",
      "contact_details": "central@cisa.dhs.gov",
      "name": "CISA",
      "namespace": "https://www.cisa.gov/"
    },
    "references": [
      {
        "category": "self",
        "summary": "SSA-625862: Multiple Vulnerabilities in Third-Party Components in SIMATIC CP 1542SP-1 and CP 1543SP-1 before V2.3 - CSAF Version",
        "url": "https://cert-portal.siemens.com/productcert/csaf/ssa-625862.json"
      },
      {
        "category": "self",
        "summary": "SSA-625862: Multiple Vulnerabilities in Third-Party Components in SIMATIC CP 1542SP-1 and CP 1543SP-1 before V2.3 - HTML Version",
        "url": "https://cert-portal.siemens.com/productcert/html/ssa-625862.html"
      },
      {
        "category": "self",
        "summary": "SSA-625862: Multiple Vulnerabilities in Third-Party Components in SIMATIC CP 1542SP-1 and CP 1543SP-1 before V2.3 - PDF Version",
        "url": "https://cert-portal.siemens.com/productcert/pdf/ssa-625862.pdf"
      },
      {
        "category": "self",
        "summary": "SSA-625862: Multiple Vulnerabilities in Third-Party Components in SIMATIC CP 1542SP-1 and CP 1543SP-1 before V2.3 - TXT Version",
        "url": "https://cert-portal.siemens.com/productcert/txt/ssa-625862.txt"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-24-165-10 JSON",
        "url": "https://raw.githubusercontent.com/cisagov/CSAF/develop/csaf_files/OT/white/2024/icsa-24-165-10.json"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-24-165-10 - Web Version",
        "url": "https://www.cisa.gov/news-events/ics-advisories/icsa-24-165-10"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/alerts/ICS-ALERT-10-301-01"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/resources-tools/resources/ics-recommended-practices"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/topics/industrial-control-systems"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/sites/default/files/publications/Cybersecurity_Best_Practices_for_Industrial_Control_Systems.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/tips/ICS-TIP-12-146-01B"
      }
    ],
    "title": "Siemens SIMATIC and SIPLUS",
    "tracking": {
      "current_release_date": "2024-06-11T00:00:00.000000Z",
      "generator": {
        "engine": {
          "name": "CISA CSAF Generator",
          "version": "1.0.0"
        }
      },
      "id": "ICSA-24-165-10",
      "initial_release_date": "2024-06-11T00:00:00.000000Z",
      "revision_history": [
        {
          "date": "2024-06-11T00:00:00.000000Z",
          "legacy_version": "1.0",
          "number": "1",
          "summary": "Publication Date"
        }
      ],
      "status": "final",
      "version": "1"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV2.3",
                "product": {
                  "name": "SIMATIC CP 1542SP-1 (6GK7542-6UX00-0XE0)",
                  "product_id": "CSAFPID-0001",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK7542-6UX00-0XE0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIMATIC CP 1542SP-1 (6GK7542-6UX00-0XE0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV2.3",
                "product": {
                  "name": "SIMATIC CP 1542SP-1 IRC (6GK7542-6VX00-0XE0)",
                  "product_id": "CSAFPID-0002",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK7542-6VX00-0XE0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIMATIC CP 1542SP-1 IRC (6GK7542-6VX00-0XE0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV2.3",
                "product": {
                  "name": "SIMATIC CP 1543SP-1 (6GK7543-6WX00-0XE0)",
                  "product_id": "CSAFPID-0003",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK7543-6WX00-0XE0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIMATIC CP 1543SP-1 (6GK7543-6WX00-0XE0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV2.3",
                "product": {
                  "name": "SIPLUS ET 200SP CP 1542SP-1 IRC TX RAIL (6AG2542-6VX00-4XE0)",
                  "product_id": "CSAFPID-0004",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6AG2542-6VX00-4XE0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIPLUS ET 200SP CP 1542SP-1 IRC TX RAIL (6AG2542-6VX00-4XE0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV2.3",
                "product": {
                  "name": "SIPLUS ET 200SP CP 1543SP-1 ISEC (6AG1543-6WX00-7XE0)",
                  "product_id": "CSAFPID-0005",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6AG1543-6WX00-7XE0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIPLUS ET 200SP CP 1543SP-1 ISEC (6AG1543-6WX00-7XE0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV2.3",
                "product": {
                  "name": "SIPLUS ET 200SP CP 1543SP-1 ISEC TX RAIL (6AG2543-6WX00-4XE0)",
                  "product_id": "CSAFPID-0006",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6AG2543-6WX00-4XE0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIPLUS ET 200SP CP 1543SP-1 ISEC TX RAIL (6AG2543-6WX00-4XE0)"
          }
        ],
        "category": "vendor",
        "name": "Siemens"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2022-2097",
      "cwe": {
        "id": "CWE-326",
        "name": "Inadequate Encryption Strength"
      },
      "notes": [
        {
          "category": "summary",
          "text": "AES OCB mode for 32-bit x86 platforms using the AES-NI assembly optimised implementation will not encrypt the entirety of the data under some circumstances. This could reveal sixteen bytes of data that was preexisting in the memory that wasn\u0027t written. In the special case of \"in place\" encryption, sixteen bytes of the plaintext would be revealed. Since OpenSSL does not support OCB based cipher suites for TLS and DTLS, they are both unaffected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.3 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954475/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ]
        }
      ],
      "title": "CVE-2022-2097"
    },
    {
      "cve": "CVE-2022-3435",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability classified as problematic has been found in Linux Kernel. This affects the function fib_nh_match of the file net/ipv4/fib_semantics.c of the component IPv4 Handler. The manipulation leads to out-of-bounds read. It is possible to initiate the attack remotely. It is recommended to apply a patch to fix this issue. The identifier VDB-210357 was assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.3 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954475/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ]
        }
      ],
      "title": "CVE-2022-3435"
    },
    {
      "cve": "CVE-2022-3545",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability has been found in Linux Kernel and classified as critical. Affected by this vulnerability is the function area_cache_get of the file drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c of the component IPsec. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. The identifier VDB-211045 was assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.3 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954475/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ]
        }
      ],
      "title": "CVE-2022-3545"
    },
    {
      "cve": "CVE-2022-3623",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in Linux Kernel. It has been declared as problematic. Affected by this vulnerability is the function follow_page_pte of the file mm/gup.c of the component BPF. The manipulation leads to race condition. The attack can be launched remotely. It is recommended to apply a patch to fix this issue. The identifier VDB-211921 was assigned to this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.3 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954475/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.0,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ]
        }
      ],
      "title": "CVE-2022-3623"
    },
    {
      "cve": "CVE-2022-3643",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Guests can trigger NIC interface reset/abort/crash via netback It is possible for a guest to trigger a NIC interface reset/abort/crash in a Linux based network backend by sending certain kinds of packets. It appears to be an (unwritten?) assumption in the rest of the Linux network stack that packet protocol headers are all contained within the linear section of the SKB and some NICs behave badly if this is not the case. This has been reported to occur with Cisco (enic) and Broadcom NetXtrem II BCM5780 (bnx2x) though it may be an issue with other NICs/drivers as well. In case the frontend is sending requests with split headers, netback will forward those violating above mentioned assumption to the networking core, resulting in said misbehavior.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.3 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954475/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ]
        }
      ],
      "title": "CVE-2022-3643"
    },
    {
      "cve": "CVE-2022-4304",
      "cwe": {
        "id": "CWE-326",
        "name": "Inadequate Encryption Strength"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A timing based side channel exists in the OpenSSL RSA Decryption implementation which could be sufficient to recover a plaintext across a network in a Bleichenbacher style attack. To achieve a successful decryption an attacker would have to be able to send a very large number of trial messages for decryption. The vulnerability affects all RSA padding modes: PKCS#1 v1.5, RSA-OEAP and RSASVE. For example, in a TLS connection, RSA is commonly used by a client to send an encrypted pre-master secret to the server. An attacker that had observed a genuine connection between a client and a server could use this flaw to send trial messages to the server and record the time taken to process them. After a sufficiently large number of messages the attacker could recover the pre-master secret used for the original connection and thus be able to decrypt the application data sent over that connection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.3 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954475/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ]
        }
      ],
      "title": "CVE-2022-4304"
    },
    {
      "cve": "CVE-2022-4450",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The function PEM_read_bio_ex() reads a PEM file from a BIO and parses and decodes the \"name\" (e.g. \"CERTIFICATE\"), any header data and the payload data. If the function succeeds then the \"name_out\", \"header\" and \"data\" arguments are populated with pointers to buffers containing the relevant decoded data. The caller is responsible for freeing those buffers. It is possible to construct a PEM file that results in 0 bytes of payload data. In this case PEM_read_bio_ex() will return a failure code but will populate the header argument with a pointer to a buffer that has already been freed. If the caller also frees this buffer then a double free will occur. This will most likely lead to a crash. This could be exploited by an attacker who has the ability to supply malicious PEM files for parsing to achieve a denial of service attack. The functions PEM_read_bio() and PEM_read() are simple wrappers around PEM_read_bio_ex() and therefore these functions are also directly affected. These functions are also called indirectly by a number of other OpenSSL functions including PEM_X509_INFO_read_bio_ex() and SSL_CTX_use_serverinfo_file() which are also vulnerable. Some OpenSSL internal uses of these functions are not vulnerable because the caller does not free the header argument if PEM_read_bio_ex() returns a failure code. These locations include the PEM_read_bio_TYPE() functions as well as the decoders introduced in OpenSSL 3.0. The OpenSSL asn1parse command line application is also impacted by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.3 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954475/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ]
        }
      ],
      "title": "CVE-2022-4450"
    },
    {
      "cve": "CVE-2022-40303",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.10.3. When parsing a multi-gigabyte XML document with the XML_PARSE_HUGE parser option enabled, several integer counters can overflow. This results in an attempt to access an array at a negative 2GB offset, typically leading to a segmentation fault.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.3 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954475/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ]
        }
      ],
      "title": "CVE-2022-40303"
    },
    {
      "cve": "CVE-2022-40304",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.10.3. Certain invalid XML entity definitions can corrupt a hash table key, potentially leading to subsequent logic errors. In one case, a double-free can be provoked.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.3 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954475/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ]
        }
      ],
      "title": "CVE-2022-40304"
    },
    {
      "cve": "CVE-2022-42328",
      "cwe": {
        "id": "CWE-667",
        "name": "Improper Locking"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Guests can trigger deadlock in Linux netback driver [This CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] The patch for XSA-392 introduced another issue which might result in a deadlock when trying to free the SKB of a packet dropped due to the XSA-392 handling (CVE-2022-42328). Additionally when dropping packages for other reasons the same deadlock could occur in case of netpoll being active for the interface the xen-netback driver is connected to (CVE-2022-42329).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.3 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954475/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ]
        }
      ],
      "title": "CVE-2022-42328"
    },
    {
      "cve": "CVE-2022-42329",
      "cwe": {
        "id": "CWE-667",
        "name": "Improper Locking"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Guests can trigger deadlock in Linux netback drive. The patch for XSA-392 introduced another issue which might result in a deadlock when trying to free the SKB of a packet dropped due to the XSA-392 handling (CVE-2022-42328). Additionally when dropping packages for other reasons the same deadlock could occur in case of netpoll being active for the interface the xen-netback driver is connected to (CVE-2022-42329).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.3 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954475/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ]
        }
      ],
      "title": "CVE-2022-42329"
    },
    {
      "cve": "CVE-2022-44792",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "handle_ipDefaultTTL in agent/mibgroup/ip-mib/ip_scalars.c in Net-SNMP 5.8 through 5.9.3 has a NULL Pointer Exception bug that can be used by a remote attacker (who has write access) to cause the instance to crash via a crafted UDP packet, resulting in Denial of Service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.3 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954475/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ]
        }
      ],
      "title": "CVE-2022-44792"
    },
    {
      "cve": "CVE-2022-44793",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "handle_ipv6IpForwarding in agent/mibgroup/ip-mib/ip_scalars.c in Net-SNMP 5.4.3 through 5.9.3 has a NULL Pointer Exception bug that can be used by a remote attacker to cause the instance to crash via a crafted UDP packet, resulting in Denial of Service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.3 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954475/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ]
        }
      ],
      "title": "CVE-2022-44793"
    },
    {
      "cve": "CVE-2023-0215",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The public API function BIO_new_NDEF is a helper function used for streaming ASN.1 data via a BIO. It is primarily used internally to OpenSSL to support the SMIME, CMS and PKCS7 streaming capabilities, but may also be called directly by end user applications. The function receives a BIO from the caller, prepends a new BIO_f_asn1 filter BIO onto the front of it to form a BIO chain, and then returns the new head of the BIO chain to the caller. Under certain conditions, for example if a CMS recipient public key is invalid, the new filter BIO is freed and the function returns a NULL result indicating a failure. However, in this case, the BIO chain is not properly cleaned up and the BIO passed by the caller still retains internal pointers to the previously freed filter BIO. If the caller then goes on to call BIO_pop() on the BIO then a use-after-free will occur. This will most likely result in a crash. This scenario occurs directly in the internal function B64_write_ASN1() which may cause BIO_new_NDEF() to be called and will subsequently call BIO_pop() on the BIO. This internal function is in turn called by the public API functions PEM_write_bio_ASN1_stream, PEM_write_bio_CMS_stream, PEM_write_bio_PKCS7_stream, SMIME_write_ASN1, SMIME_write_CMS and SMIME_write_PKCS7. Other public API functions that may be impacted by this include i2d_ASN1_bio_stream, BIO_new_CMS, BIO_new_PKCS7, i2d_CMS_bio_stream and i2d_PKCS7_bio_stream. The OpenSSL cms and smime command line applications are similarly affected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.3 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954475/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ]
        }
      ],
      "title": "CVE-2023-0215"
    },
    {
      "cve": "CVE-2023-0286",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a type confusion vulnerability relating to X.400 address processing inside an X.509 GeneralName. X.400 addresses were parsed as an ASN1_STRING but the public structure definition for GENERAL_NAME incorrectly specified the type of the x400Address field as ASN1_TYPE. This field is subsequently interpreted by the OpenSSL function GENERAL_NAME_cmp as an ASN1_TYPE rather than an ASN1_STRING. When CRL checking is enabled (i.e. the application sets the X509_V_FLAG_CRL_CHECK flag), this vulnerability may allow an attacker to pass arbitrary pointers to a memcmp call, enabling them to read memory contents or enact a denial of service. In most cases, the attack requires the attacker to provide both the certificate chain and CRL, neither of which need to have a valid signature. If the attacker only controls one of these inputs, the other input must already contain an X.400 address as a CRL distribution point, which is uncommon. As such, this vulnerability is most likely to only affect applications which have implemented their own functionality for retrieving CRLs over a network.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.3 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954475/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ]
        }
      ],
      "title": "CVE-2023-0286"
    },
    {
      "cve": "CVE-2023-0464",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A security vulnerability has been identified in all supported versions of OpenSSL related to the verification of X.509 certificate chains that include policy constraints. Attackers may be able to exploit this vulnerability by creating a malicious certificate chain that triggers exponential use of computational resources, leading to a denial-of-service (DoS) attack on affected systems.\r\n\r\nPolicy processing is disabled by default but can be enabled by passing the `-policy` argument to the command line utilities or by calling the `X509_VERIFY_PARAM_set1_policies()` function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.3 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954475/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ]
        }
      ],
      "title": "CVE-2023-0464"
    },
    {
      "cve": "CVE-2023-0465",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Applications that use a non-default option when verifying certificates may be\r\nvulnerable to an attack from a malicious CA to circumvent certain checks.\r\n\r\nInvalid certificate policies in leaf certificates are silently ignored by\r\nOpenSSL and other certificate policy checks are skipped for that certificate.\r\nA malicious CA could use this to deliberately assert invalid certificate policies\r\nin order to circumvent policy checking on the certificate altogether.\r\n\r\nPolicy processing is disabled by default but can be enabled by passing\r\nthe `-policy` argument to the command line utilities or by calling the\r\n`X509_VERIFY_PARAM_set1_policies()` function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.3 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954475/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ]
        }
      ],
      "title": "CVE-2023-0465"
    },
    {
      "cve": "CVE-2023-0466",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The function X509_VERIFY_PARAM_add0_policy() is documented to\nimplicitly enable the certificate policy check when doing certificate\nverification. However the implementation of the function does not\nenable the check which allows certificates with invalid or incorrect\npolicies to pass the certificate verification.\n\nAs suddenly enabling the policy check could break existing deployments it was\ndecided to keep the existing behavior of the X509_VERIFY_PARAM_add0_policy()\nfunction.\n\nInstead the applications that require OpenSSL to perform certificate\npolicy check need to use X509_VERIFY_PARAM_set1_policies() or explicitly\nenable the policy check by calling X509_VERIFY_PARAM_set_flags() with\nthe X509_V_FLAG_POLICY_CHECK flag argument.\n\nCertificate policy checks are disabled by default in OpenSSL and are not\ncommonly used by applications.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.3 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954475/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ]
        }
      ],
      "title": "CVE-2023-0466"
    },
    {
      "cve": "CVE-2023-28484",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libxml2 before 2.10.4, parsing of certain invalid XSD schemas can lead to a NULL pointer dereference and subsequently a segfault. This occurs in xmlSchemaFixupComplexType in xmlschemas.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.3 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954475/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ]
        }
      ],
      "title": "CVE-2023-28484"
    },
    {
      "cve": "CVE-2023-29469",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.10.4. When hashing empty dict strings in a crafted XML document, xmlDictComputeFastKey in dict.c can produce non-deterministic values, leading to various logic and memory errors, such as a double free. This behavior occurs because there is an attempt to use the first byte of an empty string, and any value is possible (not solely the \u0027\\0\u0027 value).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.3 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954475/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ]
        }
      ],
      "title": "CVE-2023-29469"
    },
    {
      "cve": "CVE-2023-38380",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The webserver implementation of the affected products does not correctly release allocated memory after it has been used.\r\n\r\nAn attacker with network access could use this vulnerability to cause a denial-of-service condition in the webserver of the affected product.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.3 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954475/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ]
        }
      ],
      "title": "CVE-2023-38380"
    },
    {
      "cve": "CVE-2023-41910",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in lldpd before 1.0.17. By crafting a CDP PDU packet with specific CDP_TLV_ADDRESSES TLVs, a malicious actor can remotely force the lldpd daemon to perform an out-of-bounds read on heap memory. This occurs in cdp_decode in daemon/protocols/cdp.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.3 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954475/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ]
        }
      ],
      "title": "CVE-2023-41910"
    },
    {
      "cve": "CVE-2023-50763",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The web server of affected products, if configured to allow the import of PKCS12 containers, could end up in an infinite loop when processing incomplete certificate chains.\r\n\r\nThis could allow an authenticated remote attacker to create a denial of service condition by importing specially crafted PKCS12 containers.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.3 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954475/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006"
          ]
        }
      ],
      "title": "CVE-2023-50763"
    }
  ]
}

{
  "document": {
    "acknowledgments": [
      {
        "organization": "Siemens ProductCERT",
        "summary": "reporting these vulnerabilities to CISA."
      }
    ],
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Disclosure is not limited",
      "tlp": {
        "label": "WHITE",
        "url": "https://us-cert.cisa.gov/tlp/"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "Siemens has released new versions for the affected products and recommends to update to the latest versions.",
        "title": "Summary"
      },
      {
        "category": "general",
        "text": "As a general security measure, Siemens strongly recommends to protect network access to devices with appropriate mechanisms. In order to operate the devices in a protected IT environment, Siemens recommends to configure the environment according to Siemens\u0027 operational guidelines for Industrial Security (Download: \nhttps://www.siemens.com/cert/operational-guidelines-industrial-security), and to follow the recommendations in the product manuals.\nAdditional information on Industrial Security by Siemens can be found at: https://www.siemens.com/industrialsecurity",
        "title": "General Recommendations"
      },
      {
        "category": "general",
        "text": "For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories",
        "title": "Additional Resources"
      },
      {
        "category": "legal_disclaimer",
        "text": "Siemens Security Advisories are subject to the terms and conditions contained in Siemens\u0027 underlying license terms or other applicable agreements previously agreed to with Siemens (hereinafter \"License Terms\"). To the extent applicable to information, software or documentation made available in or through a Siemens Security Advisory, the Terms of Use of Siemens\u0027 Global Website (https://www.siemens.com/terms_of_use, hereinafter \"Terms of Use\"), in particular Sections 8-10 of the Terms of Use, shall apply additionally. In case of conflicts, the License Terms shall prevail over the Terms of Use.",
        "title": "Terms of Use"
      },
      {
        "category": "legal_disclaimer",
        "text": "All information products included in https://us-cert.cisa.gov/ics are provided \"as is\" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see https://us-cert.cisa.gov/tlp/.",
        "title": "Legal Notice"
      },
      {
        "category": "other",
        "text": "This CISA CSAF advisory was converted from Siemens ProductCERT\u0027s CSAF advisory.",
        "title": "Advisory Conversion Disclaimer"
      },
      {
        "category": "other",
        "text": "Multiple",
        "title": "Critical infrastructure sectors"
      },
      {
        "category": "other",
        "text": "Worldwide",
        "title": "Countries/areas deployed"
      },
      {
        "category": "other",
        "text": "Germany",
        "title": "Company headquarters location"
      },
      {
        "category": "general",
        "text": "CISA recommends users take defensive measures to minimize the exploitation risk of this vulnerability.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Minimize network exposure for all control system devices and/or systems, and ensure they are not accessible from the internet.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Locate control system networks and remote devices behind firewalls and isolate them from business networks.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "When remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most recent version available. Also recognize VPN is only as secure as its connected devices.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets. Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.",
        "title": "Recommended Practices"
      }
    ],
    "publisher": {
      "category": "other",
      "contact_details": "central@cisa.dhs.gov",
      "name": "CISA",
      "namespace": "https://www.cisa.gov/"
    },
    "references": [
      {
        "category": "self",
        "summary": "SSA-879734: Multiple Vulnerabilities in SCALANCE XM-400/XR-500 before V6.6.1 - CSAF Version",
        "url": "https://cert-portal.siemens.com/productcert/csaf/ssa-879734.json"
      },
      {
        "category": "self",
        "summary": "SSA-879734: Multiple Vulnerabilities in SCALANCE XM-400/XR-500 before V6.6.1 - HTML Version",
        "url": "https://cert-portal.siemens.com/productcert/html/ssa-879734.html"
      },
      {
        "category": "self",
        "summary": "SSA-879734: Multiple Vulnerabilities in SCALANCE XM-400/XR-500 before V6.6.1 - PDF Version",
        "url": "https://cert-portal.siemens.com/productcert/pdf/ssa-879734.pdf"
      },
      {
        "category": "self",
        "summary": "SSA-879734: Multiple Vulnerabilities in SCALANCE XM-400/XR-500 before V6.6.1 - TXT Version",
        "url": "https://cert-portal.siemens.com/productcert/txt/ssa-879734.txt"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-24-165-11 JSON",
        "url": "https://raw.githubusercontent.com/cisagov/CSAF/develop/csaf_files/OT/white/2024/icsa-24-165-11.json"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-24-165-11 - Web Version",
        "url": "https://www.cisa.gov/news-events/ics-advisories/icsa-24-165-11"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/alerts/ICS-ALERT-10-301-01"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/resources-tools/resources/ics-recommended-practices"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/topics/industrial-control-systems"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/sites/default/files/publications/Cybersecurity_Best_Practices_for_Industrial_Control_Systems.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/tips/ICS-TIP-12-146-01B"
      }
    ],
    "title": "Siemens SCALANCE XM-400, XR-500",
    "tracking": {
      "current_release_date": "2024-06-11T00:00:00.000000Z",
      "generator": {
        "engine": {
          "name": "CISA CSAF Generator",
          "version": "1.0.0"
        }
      },
      "id": "ICSA-24-165-11",
      "initial_release_date": "2024-06-11T00:00:00.000000Z",
      "revision_history": [
        {
          "date": "2024-06-11T00:00:00.000000Z",
          "legacy_version": "1.0",
          "number": "1",
          "summary": "Publication Date"
        }
      ],
      "status": "final",
      "version": "1"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV6.6.1",
                "product": {
                  "name": "SCALANCE XM408-4C (6GK5408-4GP00-2AM2)",
                  "product_id": "CSAFPID-0001",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5408-4GP00-2AM2"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE XM408-4C (6GK5408-4GP00-2AM2)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV6.6.1",
                "product": {
                  "name": "SCALANCE XM408-4C (L3 int.) (6GK5408-4GQ00-2AM2)",
                  "product_id": "CSAFPID-0002",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5408-4GQ00-2AM2"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE XM408-4C (L3 int.) (6GK5408-4GQ00-2AM2)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV6.6.1",
                "product": {
                  "name": "SCALANCE XM408-8C (6GK5408-8GS00-2AM2)",
                  "product_id": "CSAFPID-0003",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5408-8GS00-2AM2"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE XM408-8C (6GK5408-8GS00-2AM2)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV6.6.1",
                "product": {
                  "name": "SCALANCE XM408-8C (L3 int.) (6GK5408-8GR00-2AM2)",
                  "product_id": "CSAFPID-0004",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5408-8GR00-2AM2"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE XM408-8C (L3 int.) (6GK5408-8GR00-2AM2)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV6.6.1",
                "product": {
                  "name": "SCALANCE XM416-4C (6GK5416-4GS00-2AM2)",
                  "product_id": "CSAFPID-0005",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5416-4GS00-2AM2"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE XM416-4C (6GK5416-4GS00-2AM2)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV6.6.1",
                "product": {
                  "name": "SCALANCE XM416-4C (L3 int.) (6GK5416-4GR00-2AM2)",
                  "product_id": "CSAFPID-0006",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5416-4GR00-2AM2"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE XM416-4C (L3 int.) (6GK5416-4GR00-2AM2)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV6.6.1",
                "product": {
                  "name": "SCALANCE XR524-8C, 1x230V (6GK5524-8GS00-3AR2)",
                  "product_id": "CSAFPID-0007",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5524-8GS00-3AR2"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE XR524-8C, 1x230V (6GK5524-8GS00-3AR2)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV6.6.1",
                "product": {
                  "name": "SCALANCE XR524-8C, 1x230V (L3 int.) (6GK5524-8GR00-3AR2)",
                  "product_id": "CSAFPID-0008",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5524-8GR00-3AR2"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE XR524-8C, 1x230V (L3 int.) (6GK5524-8GR00-3AR2)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV6.6.1",
                "product": {
                  "name": "SCALANCE XR524-8C, 2x230V (6GK5524-8GS00-4AR2)",
                  "product_id": "CSAFPID-0009",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5524-8GS00-4AR2"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE XR524-8C, 2x230V (6GK5524-8GS00-4AR2)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV6.6.1",
                "product": {
                  "name": "SCALANCE XR524-8C, 2x230V (L3 int.) (6GK5524-8GR00-4AR2)",
                  "product_id": "CSAFPID-0010",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5524-8GR00-4AR2"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE XR524-8C, 2x230V (L3 int.) (6GK5524-8GR00-4AR2)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV6.6.1",
                "product": {
                  "name": "SCALANCE XR524-8C, 24V (6GK5524-8GS00-2AR2)",
                  "product_id": "CSAFPID-0011",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5524-8GS00-2AR2"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE XR524-8C, 24V (6GK5524-8GS00-2AR2)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV6.6.1",
                "product": {
                  "name": "SCALANCE XR524-8C, 24V (L3 int.) (6GK5524-8GR00-2AR2)",
                  "product_id": "CSAFPID-0012",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5524-8GR00-2AR2"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE XR524-8C, 24V (L3 int.) (6GK5524-8GR00-2AR2)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV6.6.1",
                "product": {
                  "name": "SCALANCE XR526-8C, 1x230V (6GK5526-8GS00-3AR2)",
                  "product_id": "CSAFPID-0013",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5526-8GS00-3AR2"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE XR526-8C, 1x230V (6GK5526-8GS00-3AR2)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV6.6.1",
                "product": {
                  "name": "SCALANCE XR526-8C, 1x230V (L3 int.) (6GK5526-8GR00-3AR2)",
                  "product_id": "CSAFPID-0014",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5526-8GR00-3AR2"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE XR526-8C, 1x230V (L3 int.) (6GK5526-8GR00-3AR2)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV6.6.1",
                "product": {
                  "name": "SCALANCE XR526-8C, 2x230V (6GK5526-8GS00-4AR2)",
                  "product_id": "CSAFPID-0015",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5526-8GS00-4AR2"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE XR526-8C, 2x230V (6GK5526-8GS00-4AR2)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV6.6.1",
                "product": {
                  "name": "SCALANCE XR526-8C, 2x230V (L3 int.) (6GK5526-8GR00-4AR2)",
                  "product_id": "CSAFPID-0016",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5526-8GR00-4AR2"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE XR526-8C, 2x230V (L3 int.) (6GK5526-8GR00-4AR2)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV6.6.1",
                "product": {
                  "name": "SCALANCE XR526-8C, 24V (6GK5526-8GS00-2AR2)",
                  "product_id": "CSAFPID-0017",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5526-8GS00-2AR2"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE XR526-8C, 24V (6GK5526-8GS00-2AR2)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV6.6.1",
                "product": {
                  "name": "SCALANCE XR526-8C, 24V (L3 int.) (6GK5526-8GR00-2AR2)",
                  "product_id": "CSAFPID-0018",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5526-8GR00-2AR2"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE XR526-8C, 24V (L3 int.) (6GK5526-8GR00-2AR2)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV6.6.1",
                "product": {
                  "name": "SCALANCE XR528-6M (2HR2) (6GK5528-0AA00-2HR2)",
                  "product_id": "CSAFPID-0019",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5528-0AA00-2HR2"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE XR528-6M (2HR2) (6GK5528-0AA00-2HR2)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV6.6.1",
                "product": {
                  "name": "SCALANCE XR528-6M (2HR2, L3 int.) (6GK5528-0AR00-2HR2)",
                  "product_id": "CSAFPID-0020",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5528-0AR00-2HR2"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE XR528-6M (2HR2, L3 int.) (6GK5528-0AR00-2HR2)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV6.6.1",
                "product": {
                  "name": "SCALANCE XR528-6M (6GK5528-0AA00-2AR2)",
                  "product_id": "CSAFPID-0021",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5528-0AA00-2AR2"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE XR528-6M (6GK5528-0AA00-2AR2)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV6.6.1",
                "product": {
                  "name": "SCALANCE XR528-6M (L3 int.) (6GK5528-0AR00-2AR2)",
                  "product_id": "CSAFPID-0022",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5528-0AR00-2AR2"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE XR528-6M (L3 int.) (6GK5528-0AR00-2AR2)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV6.6.1",
                "product": {
                  "name": "SCALANCE XR552-12M (2HR2) (6GK5552-0AA00-2HR2)",
                  "product_id": "CSAFPID-0023",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5552-0AA00-2HR2"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE XR552-12M (2HR2) (6GK5552-0AA00-2HR2)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV6.6.1",
                "product": {
                  "name": "SCALANCE XR552-12M (2HR2) (6GK5552-0AR00-2HR2)",
                  "product_id": "CSAFPID-0024",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5552-0AR00-2HR2"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE XR552-12M (2HR2) (6GK5552-0AR00-2HR2)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV6.6.1",
                "product": {
                  "name": "SCALANCE XR552-12M (2HR2, L3 int.) (6GK5552-0AR00-2AR2)",
                  "product_id": "CSAFPID-0025",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5552-0AR00-2AR2"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE XR552-12M (2HR2, L3 int.) (6GK5552-0AR00-2AR2)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV6.6.1",
                "product": {
                  "name": "SCALANCE XR552-12M (6GK5552-0AA00-2AR2)",
                  "product_id": "CSAFPID-0026",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK5552-0AA00-2AR2"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SCALANCE XR552-12M (6GK5552-0AA00-2AR2)"
          }
        ],
        "category": "vendor",
        "name": "Siemens"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2022-2097",
      "cwe": {
        "id": "CWE-326",
        "name": "Inadequate Encryption Strength"
      },
      "notes": [
        {
          "category": "summary",
          "text": "AES OCB mode for 32-bit x86 platforms using the AES-NI assembly optimised implementation will not encrypt the entirety of the data under some circumstances. This could reveal sixteen bytes of data that was preexisting in the memory that wasn\u0027t written. In the special case of \"in place\" encryption, sixteen bytes of the plaintext would be revealed. Since OpenSSL does not support OCB based cipher suites for TLS and DTLS, they are both unaffected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0021",
          "CSAFPID-0020",
          "CSAFPID-0019",
          "CSAFPID-0022",
          "CSAFPID-0026",
          "CSAFPID-0025",
          "CSAFPID-0023",
          "CSAFPID-0024"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V6.6.1 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0021",
            "CSAFPID-0020",
            "CSAFPID-0019",
            "CSAFPID-0022",
            "CSAFPID-0026",
            "CSAFPID-0025",
            "CSAFPID-0023",
            "CSAFPID-0024"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955252/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0021",
            "CSAFPID-0020",
            "CSAFPID-0019",
            "CSAFPID-0022",
            "CSAFPID-0026",
            "CSAFPID-0025",
            "CSAFPID-0023",
            "CSAFPID-0024"
          ]
        }
      ],
      "title": "CVE-2022-2097"
    },
    {
      "cve": "CVE-2022-4304",
      "cwe": {
        "id": "CWE-326",
        "name": "Inadequate Encryption Strength"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A timing based side channel exists in the OpenSSL RSA Decryption implementation which could be sufficient to recover a plaintext across a network in a Bleichenbacher style attack. To achieve a successful decryption an attacker would have to be able to send a very large number of trial messages for decryption. The vulnerability affects all RSA padding modes: PKCS#1 v1.5, RSA-OEAP and RSASVE. For example, in a TLS connection, RSA is commonly used by a client to send an encrypted pre-master secret to the server. An attacker that had observed a genuine connection between a client and a server could use this flaw to send trial messages to the server and record the time taken to process them. After a sufficiently large number of messages the attacker could recover the pre-master secret used for the original connection and thus be able to decrypt the application data sent over that connection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0021",
          "CSAFPID-0020",
          "CSAFPID-0019",
          "CSAFPID-0022",
          "CSAFPID-0026",
          "CSAFPID-0025",
          "CSAFPID-0023",
          "CSAFPID-0024"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V6.6.1 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0021",
            "CSAFPID-0020",
            "CSAFPID-0019",
            "CSAFPID-0022",
            "CSAFPID-0026",
            "CSAFPID-0025",
            "CSAFPID-0023",
            "CSAFPID-0024"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955252/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0021",
            "CSAFPID-0020",
            "CSAFPID-0019",
            "CSAFPID-0022",
            "CSAFPID-0026",
            "CSAFPID-0025",
            "CSAFPID-0023",
            "CSAFPID-0024"
          ]
        }
      ],
      "title": "CVE-2022-4304"
    },
    {
      "cve": "CVE-2022-4450",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The function PEM_read_bio_ex() reads a PEM file from a BIO and parses and decodes the \"name\" (e.g. \"CERTIFICATE\"), any header data and the payload data. If the function succeeds then the \"name_out\", \"header\" and \"data\" arguments are populated with pointers to buffers containing the relevant decoded data. The caller is responsible for freeing those buffers. It is possible to construct a PEM file that results in 0 bytes of payload data. In this case PEM_read_bio_ex() will return a failure code but will populate the header argument with a pointer to a buffer that has already been freed. If the caller also frees this buffer then a double free will occur. This will most likely lead to a crash. This could be exploited by an attacker who has the ability to supply malicious PEM files for parsing to achieve a denial of service attack. The functions PEM_read_bio() and PEM_read() are simple wrappers around PEM_read_bio_ex() and therefore these functions are also directly affected. These functions are also called indirectly by a number of other OpenSSL functions including PEM_X509_INFO_read_bio_ex() and SSL_CTX_use_serverinfo_file() which are also vulnerable. Some OpenSSL internal uses of these functions are not vulnerable because the caller does not free the header argument if PEM_read_bio_ex() returns a failure code. These locations include the PEM_read_bio_TYPE() functions as well as the decoders introduced in OpenSSL 3.0. The OpenSSL asn1parse command line application is also impacted by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0021",
          "CSAFPID-0020",
          "CSAFPID-0019",
          "CSAFPID-0022",
          "CSAFPID-0026",
          "CSAFPID-0025",
          "CSAFPID-0023",
          "CSAFPID-0024"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V6.6.1 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0021",
            "CSAFPID-0020",
            "CSAFPID-0019",
            "CSAFPID-0022",
            "CSAFPID-0026",
            "CSAFPID-0025",
            "CSAFPID-0023",
            "CSAFPID-0024"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955252/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0021",
            "CSAFPID-0020",
            "CSAFPID-0019",
            "CSAFPID-0022",
            "CSAFPID-0026",
            "CSAFPID-0025",
            "CSAFPID-0023",
            "CSAFPID-0024"
          ]
        }
      ],
      "title": "CVE-2022-4450"
    },
    {
      "cve": "CVE-2023-0215",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The public API function BIO_new_NDEF is a helper function used for streaming ASN.1 data via a BIO. It is primarily used internally to OpenSSL to support the SMIME, CMS and PKCS7 streaming capabilities, but may also be called directly by end user applications. The function receives a BIO from the caller, prepends a new BIO_f_asn1 filter BIO onto the front of it to form a BIO chain, and then returns the new head of the BIO chain to the caller. Under certain conditions, for example if a CMS recipient public key is invalid, the new filter BIO is freed and the function returns a NULL result indicating a failure. However, in this case, the BIO chain is not properly cleaned up and the BIO passed by the caller still retains internal pointers to the previously freed filter BIO. If the caller then goes on to call BIO_pop() on the BIO then a use-after-free will occur. This will most likely result in a crash. This scenario occurs directly in the internal function B64_write_ASN1() which may cause BIO_new_NDEF() to be called and will subsequently call BIO_pop() on the BIO. This internal function is in turn called by the public API functions PEM_write_bio_ASN1_stream, PEM_write_bio_CMS_stream, PEM_write_bio_PKCS7_stream, SMIME_write_ASN1, SMIME_write_CMS and SMIME_write_PKCS7. Other public API functions that may be impacted by this include i2d_ASN1_bio_stream, BIO_new_CMS, BIO_new_PKCS7, i2d_CMS_bio_stream and i2d_PKCS7_bio_stream. The OpenSSL cms and smime command line applications are similarly affected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0021",
          "CSAFPID-0020",
          "CSAFPID-0019",
          "CSAFPID-0022",
          "CSAFPID-0026",
          "CSAFPID-0025",
          "CSAFPID-0023",
          "CSAFPID-0024"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V6.6.1 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0021",
            "CSAFPID-0020",
            "CSAFPID-0019",
            "CSAFPID-0022",
            "CSAFPID-0026",
            "CSAFPID-0025",
            "CSAFPID-0023",
            "CSAFPID-0024"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955252/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0021",
            "CSAFPID-0020",
            "CSAFPID-0019",
            "CSAFPID-0022",
            "CSAFPID-0026",
            "CSAFPID-0025",
            "CSAFPID-0023",
            "CSAFPID-0024"
          ]
        }
      ],
      "title": "CVE-2023-0215"
    },
    {
      "cve": "CVE-2023-0286",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a type confusion vulnerability relating to X.400 address processing inside an X.509 GeneralName. X.400 addresses were parsed as an ASN1_STRING but the public structure definition for GENERAL_NAME incorrectly specified the type of the x400Address field as ASN1_TYPE. This field is subsequently interpreted by the OpenSSL function GENERAL_NAME_cmp as an ASN1_TYPE rather than an ASN1_STRING. When CRL checking is enabled (i.e. the application sets the X509_V_FLAG_CRL_CHECK flag), this vulnerability may allow an attacker to pass arbitrary pointers to a memcmp call, enabling them to read memory contents or enact a denial of service. In most cases, the attack requires the attacker to provide both the certificate chain and CRL, neither of which need to have a valid signature. If the attacker only controls one of these inputs, the other input must already contain an X.400 address as a CRL distribution point, which is uncommon. As such, this vulnerability is most likely to only affect applications which have implemented their own functionality for retrieving CRLs over a network.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0021",
          "CSAFPID-0020",
          "CSAFPID-0019",
          "CSAFPID-0022",
          "CSAFPID-0026",
          "CSAFPID-0025",
          "CSAFPID-0023",
          "CSAFPID-0024"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V6.6.1 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0021",
            "CSAFPID-0020",
            "CSAFPID-0019",
            "CSAFPID-0022",
            "CSAFPID-0026",
            "CSAFPID-0025",
            "CSAFPID-0023",
            "CSAFPID-0024"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955252/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0021",
            "CSAFPID-0020",
            "CSAFPID-0019",
            "CSAFPID-0022",
            "CSAFPID-0026",
            "CSAFPID-0025",
            "CSAFPID-0023",
            "CSAFPID-0024"
          ]
        }
      ],
      "title": "CVE-2023-0286"
    },
    {
      "cve": "CVE-2023-0464",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A security vulnerability has been identified in all supported versions of OpenSSL related to the verification of X.509 certificate chains that include policy constraints. Attackers may be able to exploit this vulnerability by creating a malicious certificate chain that triggers exponential use of computational resources, leading to a denial-of-service (DoS) attack on affected systems.\r\n\r\nPolicy processing is disabled by default but can be enabled by passing the `-policy` argument to the command line utilities or by calling the `X509_VERIFY_PARAM_set1_policies()` function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0021",
          "CSAFPID-0020",
          "CSAFPID-0019",
          "CSAFPID-0022",
          "CSAFPID-0026",
          "CSAFPID-0025",
          "CSAFPID-0023",
          "CSAFPID-0024"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V6.6.1 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0021",
            "CSAFPID-0020",
            "CSAFPID-0019",
            "CSAFPID-0022",
            "CSAFPID-0026",
            "CSAFPID-0025",
            "CSAFPID-0023",
            "CSAFPID-0024"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955252/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0021",
            "CSAFPID-0020",
            "CSAFPID-0019",
            "CSAFPID-0022",
            "CSAFPID-0026",
            "CSAFPID-0025",
            "CSAFPID-0023",
            "CSAFPID-0024"
          ]
        }
      ],
      "title": "CVE-2023-0464"
    },
    {
      "cve": "CVE-2023-0465",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Applications that use a non-default option when verifying certificates may be\r\nvulnerable to an attack from a malicious CA to circumvent certain checks.\r\n\r\nInvalid certificate policies in leaf certificates are silently ignored by\r\nOpenSSL and other certificate policy checks are skipped for that certificate.\r\nA malicious CA could use this to deliberately assert invalid certificate policies\r\nin order to circumvent policy checking on the certificate altogether.\r\n\r\nPolicy processing is disabled by default but can be enabled by passing\r\nthe `-policy` argument to the command line utilities or by calling the\r\n`X509_VERIFY_PARAM_set1_policies()` function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0021",
          "CSAFPID-0020",
          "CSAFPID-0019",
          "CSAFPID-0022",
          "CSAFPID-0026",
          "CSAFPID-0025",
          "CSAFPID-0023",
          "CSAFPID-0024"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V6.6.1 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0021",
            "CSAFPID-0020",
            "CSAFPID-0019",
            "CSAFPID-0022",
            "CSAFPID-0026",
            "CSAFPID-0025",
            "CSAFPID-0023",
            "CSAFPID-0024"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955252/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0021",
            "CSAFPID-0020",
            "CSAFPID-0019",
            "CSAFPID-0022",
            "CSAFPID-0026",
            "CSAFPID-0025",
            "CSAFPID-0023",
            "CSAFPID-0024"
          ]
        }
      ],
      "title": "CVE-2023-0465"
    },
    {
      "cve": "CVE-2023-0466",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The function X509_VERIFY_PARAM_add0_policy() is documented to\nimplicitly enable the certificate policy check when doing certificate\nverification. However the implementation of the function does not\nenable the check which allows certificates with invalid or incorrect\npolicies to pass the certificate verification.\n\nAs suddenly enabling the policy check could break existing deployments it was\ndecided to keep the existing behavior of the X509_VERIFY_PARAM_add0_policy()\nfunction.\n\nInstead the applications that require OpenSSL to perform certificate\npolicy check need to use X509_VERIFY_PARAM_set1_policies() or explicitly\nenable the policy check by calling X509_VERIFY_PARAM_set_flags() with\nthe X509_V_FLAG_POLICY_CHECK flag argument.\n\nCertificate policy checks are disabled by default in OpenSSL and are not\ncommonly used by applications.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005",
          "CSAFPID-0006",
          "CSAFPID-0007",
          "CSAFPID-0008",
          "CSAFPID-0011",
          "CSAFPID-0012",
          "CSAFPID-0009",
          "CSAFPID-0010",
          "CSAFPID-0013",
          "CSAFPID-0014",
          "CSAFPID-0017",
          "CSAFPID-0018",
          "CSAFPID-0015",
          "CSAFPID-0016",
          "CSAFPID-0021",
          "CSAFPID-0020",
          "CSAFPID-0019",
          "CSAFPID-0022",
          "CSAFPID-0026",
          "CSAFPID-0025",
          "CSAFPID-0023",
          "CSAFPID-0024"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V6.6.1 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0021",
            "CSAFPID-0020",
            "CSAFPID-0019",
            "CSAFPID-0022",
            "CSAFPID-0026",
            "CSAFPID-0025",
            "CSAFPID-0023",
            "CSAFPID-0024"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955252/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005",
            "CSAFPID-0006",
            "CSAFPID-0007",
            "CSAFPID-0008",
            "CSAFPID-0011",
            "CSAFPID-0012",
            "CSAFPID-0009",
            "CSAFPID-0010",
            "CSAFPID-0013",
            "CSAFPID-0014",
            "CSAFPID-0017",
            "CSAFPID-0018",
            "CSAFPID-0015",
            "CSAFPID-0016",
            "CSAFPID-0021",
            "CSAFPID-0020",
            "CSAFPID-0019",
            "CSAFPID-0022",
            "CSAFPID-0026",
            "CSAFPID-0025",
            "CSAFPID-0023",
            "CSAFPID-0024"
          ]
        }
      ],
      "title": "CVE-2023-0466"
    }
  ]
}

{
  "document": {
    "acknowledgments": [
      {
        "organization": "Siemens ProductCERT",
        "summary": "reporting these vulnerabilities to CISA."
      }
    ],
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Disclosure is not limited",
      "tlp": {
        "label": "WHITE",
        "url": "https://us-cert.cisa.gov/tlp/"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "Siemens has released new versions for the affected products and recommends to update to the latest versions.",
        "title": "Summary"
      },
      {
        "category": "general",
        "text": "As a general security measure, Siemens strongly recommends to protect network access to devices with appropriate mechanisms. In order to operate the devices in a protected IT environment, Siemens recommends to configure the environment according to Siemens\u0027 operational guidelines for Industrial Security (Download: \nhttps://www.siemens.com/cert/operational-guidelines-industrial-security), and to follow the recommendations in the product manuals.\nAdditional information on Industrial Security by Siemens can be found at: https://www.siemens.com/industrialsecurity",
        "title": "General Recommendations"
      },
      {
        "category": "general",
        "text": "For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories",
        "title": "Additional Resources"
      },
      {
        "category": "legal_disclaimer",
        "text": "Siemens Security Advisories are subject to the terms and conditions contained in Siemens\u0027 underlying license terms or other applicable agreements previously agreed to with Siemens (hereinafter \"License Terms\"). To the extent applicable to information, software or documentation made available in or through a Siemens Security Advisory, the Terms of Use of Siemens\u0027 Global Website (https://www.siemens.com/terms_of_use, hereinafter \"Terms of Use\"), in particular Sections 8-10 of the Terms of Use, shall apply additionally. In case of conflicts, the License Terms shall prevail over the Terms of Use.",
        "title": "Terms of Use"
      },
      {
        "category": "legal_disclaimer",
        "text": "All information products included in https://us-cert.cisa.gov/ics are provided \"as is\" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see https://us-cert.cisa.gov/tlp/.",
        "title": "Legal Notice"
      },
      {
        "category": "other",
        "text": "This CISA CSAF advisory was converted from Siemens ProductCERT\u0027s CSAF advisory.",
        "title": "Advisory Conversion Disclaimer"
      },
      {
        "category": "other",
        "text": "Multiple",
        "title": "Critical infrastructure sectors"
      },
      {
        "category": "other",
        "text": "Worldwide",
        "title": "Countries/areas deployed"
      },
      {
        "category": "other",
        "text": "Germany",
        "title": "Company headquarters location"
      },
      {
        "category": "general",
        "text": "CISA recommends users take defensive measures to minimize the exploitation risk of this vulnerability.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Minimize network exposure for all control system devices and/or systems, and ensure they are not accessible from the internet.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Locate control system networks and remote devices behind firewalls and isolate them from business networks.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "When remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most recent version available. Also recognize VPN is only as secure as its connected devices.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets. Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.",
        "title": "Recommended Practices"
      }
    ],
    "publisher": {
      "category": "other",
      "contact_details": "central@cisa.dhs.gov",
      "name": "CISA",
      "namespace": "https://www.cisa.gov/"
    },
    "references": [
      {
        "category": "self",
        "summary": "SSA-337522: Multiple Vulnerabilities in TIM 1531 IRC before V2.4.8 - CSAF Version",
        "url": "https://cert-portal.siemens.com/productcert/csaf/ssa-337522.json"
      },
      {
        "category": "self",
        "summary": "SSA-337522: Multiple Vulnerabilities in TIM 1531 IRC before V2.4.8 - HTML Version",
        "url": "https://cert-portal.siemens.com/productcert/html/ssa-337522.html"
      },
      {
        "category": "self",
        "summary": "SSA-337522: Multiple Vulnerabilities in TIM 1531 IRC before V2.4.8 - PDF Version",
        "url": "https://cert-portal.siemens.com/productcert/pdf/ssa-337522.pdf"
      },
      {
        "category": "self",
        "summary": "SSA-337522: Multiple Vulnerabilities in TIM 1531 IRC before V2.4.8 - TXT Version",
        "url": "https://cert-portal.siemens.com/productcert/txt/ssa-337522.txt"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-24-165-06 JSON",
        "url": "https://raw.githubusercontent.com/cisagov/CSAF/develop/csaf_files/OT/white/2024/icsa-24-165-06.json"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-24-165-06 - Web Version",
        "url": "https://www.cisa.gov/news-events/ics-advisories/icsa-24-165-06"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/alerts/ICS-ALERT-10-301-01"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/resources-tools/resources/ics-recommended-practices"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/topics/industrial-control-systems"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/sites/default/files/publications/Cybersecurity_Best_Practices_for_Industrial_Control_Systems.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/tips/ICS-TIP-12-146-01B"
      }
    ],
    "title": "Siemens TIM 1531 IRC",
    "tracking": {
      "current_release_date": "2024-07-09T00:00:00.000000Z",
      "generator": {
        "engine": {
          "name": "CISA CSAF Generator",
          "version": "1.0.0"
        }
      },
      "id": "ICSA-24-165-06",
      "initial_release_date": "2024-06-11T00:00:00.000000Z",
      "revision_history": [
        {
          "date": "2024-06-11T00:00:00.000000Z",
          "legacy_version": "1.0",
          "number": "1",
          "summary": "Publication Date"
        },
        {
          "date": "2024-07-09T00:00:00.000000Z",
          "legacy_version": "1.1",
          "number": "2",
          "summary": "Updated contents of CVE-2023-27321 (OPC Foundation UA .NET Standard: Description, CVSS vector, CWE)"
        }
      ],
      "status": "final",
      "version": "2"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV2.4.8",
                "product": {
                  "name": "SIPLUS TIM 1531 IRC (6AG1543-1MX00-7XE0)",
                  "product_id": "CSAFPID-0001",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6AG1543-1MX00-7XE0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIPLUS TIM 1531 IRC (6AG1543-1MX00-7XE0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV2.4.8",
                "product": {
                  "name": "TIM 1531 IRC (6GK7543-1MX00-0XE0)",
                  "product_id": "CSAFPID-0002",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK7543-1MX00-0XE0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "TIM 1531 IRC (6GK7543-1MX00-0XE0)"
          }
        ],
        "category": "vendor",
        "name": "Siemens"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2021-47178",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: scsi: target: core: Avoid smp_processor_id() in preemptible code.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2021-47178"
    },
    {
      "cve": "CVE-2022-1015",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel in linux/net/netfilter/nf_tables_api.c of the netfilter subsystem. This flaw allows a local user to cause an out-of-bounds write issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.6,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2022-1015"
    },
    {
      "cve": "CVE-2022-4304",
      "cwe": {
        "id": "CWE-326",
        "name": "Inadequate Encryption Strength"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A timing based side channel exists in the OpenSSL RSA Decryption implementation which could be sufficient to recover a plaintext across a network in a Bleichenbacher style attack. To achieve a successful decryption an attacker would have to be able to send a very large number of trial messages for decryption. The vulnerability affects all RSA padding modes: PKCS#1 v1.5, RSA-OEAP and RSASVE. For example, in a TLS connection, RSA is commonly used by a client to send an encrypted pre-master secret to the server. An attacker that had observed a genuine connection between a client and a server could use this flaw to send trial messages to the server and record the time taken to process them. After a sufficiently large number of messages the attacker could recover the pre-master secret used for the original connection and thus be able to decrypt the application data sent over that connection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2022-4304"
    },
    {
      "cve": "CVE-2022-4450",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The function PEM_read_bio_ex() reads a PEM file from a BIO and parses and decodes the \"name\" (e.g. \"CERTIFICATE\"), any header data and the payload data. If the function succeeds then the \"name_out\", \"header\" and \"data\" arguments are populated with pointers to buffers containing the relevant decoded data. The caller is responsible for freeing those buffers. It is possible to construct a PEM file that results in 0 bytes of payload data. In this case PEM_read_bio_ex() will return a failure code but will populate the header argument with a pointer to a buffer that has already been freed. If the caller also frees this buffer then a double free will occur. This will most likely lead to a crash. This could be exploited by an attacker who has the ability to supply malicious PEM files for parsing to achieve a denial of service attack. The functions PEM_read_bio() and PEM_read() are simple wrappers around PEM_read_bio_ex() and therefore these functions are also directly affected. These functions are also called indirectly by a number of other OpenSSL functions including PEM_X509_INFO_read_bio_ex() and SSL_CTX_use_serverinfo_file() which are also vulnerable. Some OpenSSL internal uses of these functions are not vulnerable because the caller does not free the header argument if PEM_read_bio_ex() returns a failure code. These locations include the PEM_read_bio_TYPE() functions as well as the decoders introduced in OpenSSL 3.0. The OpenSSL asn1parse command line application is also impacted by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2022-4450"
    },
    {
      "cve": "CVE-2022-39189",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered the x86 KVM subsystem in the Linux kernel before 5.18.17. Unprivileged guest users can compromise the guest kernel because TLB flush operations are mishandled in certain KVM_VCPU_PREEMPTED situations.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2022-39189"
    },
    {
      "cve": "CVE-2022-40225",
      "cwe": {
        "id": "CWE-681",
        "name": "Incorrect Conversion between Numeric Types"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Casting an internal value could lead to floating point exception under certain circumstances. This could allow an attacker to cause a denial of service condition on affected devices.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2022-40225"
    },
    {
      "cve": "CVE-2022-40303",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.10.3. When parsing a multi-gigabyte XML document with the XML_PARSE_HUGE parser option enabled, several integer counters can overflow. This results in an attempt to access an array at a negative 2GB offset, typically leading to a segmentation fault.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2022-40303"
    },
    {
      "cve": "CVE-2022-40304",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.10.3. Certain invalid XML entity definitions can corrupt a hash table key, potentially leading to subsequent logic errors. In one case, a double-free can be provoked.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2022-40304"
    },
    {
      "cve": "CVE-2022-45886",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel through 6.0.9. drivers/media/dvb-core/dvb_net.c has a .disconnect versus dvb_device_open race condition that leads to a use-after-free.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2022-45886"
    },
    {
      "cve": "CVE-2022-45887",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel through 6.0.9. drivers/media/usb/ttusb-dec/ttusb_dec.c has a memory leak because of the lack of a dvb_frontend_detach call.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2022-45887"
    },
    {
      "cve": "CVE-2022-45919",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel through 6.0.10. In drivers/media/dvb-core/dvb_ca_en50221.c, a use-after-free can occur is there is a disconnect after an open, because of the lack of a wait_event.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2022-45919"
    },
    {
      "cve": "CVE-2023-0160",
      "cwe": {
        "id": "CWE-667",
        "name": "Improper Locking"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A deadlock flaw was found in the Linux kernel\u2019s BPF subsystem. This flaw allows a local user to potentially crash the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-0160"
    },
    {
      "cve": "CVE-2023-0215",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The public API function BIO_new_NDEF is a helper function used for streaming ASN.1 data via a BIO. It is primarily used internally to OpenSSL to support the SMIME, CMS and PKCS7 streaming capabilities, but may also be called directly by end user applications. The function receives a BIO from the caller, prepends a new BIO_f_asn1 filter BIO onto the front of it to form a BIO chain, and then returns the new head of the BIO chain to the caller. Under certain conditions, for example if a CMS recipient public key is invalid, the new filter BIO is freed and the function returns a NULL result indicating a failure. However, in this case, the BIO chain is not properly cleaned up and the BIO passed by the caller still retains internal pointers to the previously freed filter BIO. If the caller then goes on to call BIO_pop() on the BIO then a use-after-free will occur. This will most likely result in a crash. This scenario occurs directly in the internal function B64_write_ASN1() which may cause BIO_new_NDEF() to be called and will subsequently call BIO_pop() on the BIO. This internal function is in turn called by the public API functions PEM_write_bio_ASN1_stream, PEM_write_bio_CMS_stream, PEM_write_bio_PKCS7_stream, SMIME_write_ASN1, SMIME_write_CMS and SMIME_write_PKCS7. Other public API functions that may be impacted by this include i2d_ASN1_bio_stream, BIO_new_CMS, BIO_new_PKCS7, i2d_CMS_bio_stream and i2d_PKCS7_bio_stream. The OpenSSL cms and smime command line applications are similarly affected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-0215"
    },
    {
      "cve": "CVE-2023-0286",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a type confusion vulnerability relating to X.400 address processing inside an X.509 GeneralName. X.400 addresses were parsed as an ASN1_STRING but the public structure definition for GENERAL_NAME incorrectly specified the type of the x400Address field as ASN1_TYPE. This field is subsequently interpreted by the OpenSSL function GENERAL_NAME_cmp as an ASN1_TYPE rather than an ASN1_STRING. When CRL checking is enabled (i.e. the application sets the X509_V_FLAG_CRL_CHECK flag), this vulnerability may allow an attacker to pass arbitrary pointers to a memcmp call, enabling them to read memory contents or enact a denial of service. In most cases, the attack requires the attacker to provide both the certificate chain and CRL, neither of which need to have a valid signature. If the attacker only controls one of these inputs, the other input must already contain an X.400 address as a CRL distribution point, which is uncommon. As such, this vulnerability is most likely to only affect applications which have implemented their own functionality for retrieving CRLs over a network.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-0286"
    },
    {
      "cve": "CVE-2023-0464",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A security vulnerability has been identified in all supported versions of OpenSSL related to the verification of X.509 certificate chains that include policy constraints. Attackers may be able to exploit this vulnerability by creating a malicious certificate chain that triggers exponential use of computational resources, leading to a denial-of-service (DoS) attack on affected systems.\r\n\r\nPolicy processing is disabled by default but can be enabled by passing the `-policy` argument to the command line utilities or by calling the `X509_VERIFY_PARAM_set1_policies()` function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-0464"
    },
    {
      "cve": "CVE-2023-0465",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Applications that use a non-default option when verifying certificates may be\r\nvulnerable to an attack from a malicious CA to circumvent certain checks.\r\n\r\nInvalid certificate policies in leaf certificates are silently ignored by\r\nOpenSSL and other certificate policy checks are skipped for that certificate.\r\nA malicious CA could use this to deliberately assert invalid certificate policies\r\nin order to circumvent policy checking on the certificate altogether.\r\n\r\nPolicy processing is disabled by default but can be enabled by passing\r\nthe `-policy` argument to the command line utilities or by calling the\r\n`X509_VERIFY_PARAM_set1_policies()` function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-0465"
    },
    {
      "cve": "CVE-2023-0466",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The function X509_VERIFY_PARAM_add0_policy() is documented to\nimplicitly enable the certificate policy check when doing certificate\nverification. However the implementation of the function does not\nenable the check which allows certificates with invalid or incorrect\npolicies to pass the certificate verification.\n\nAs suddenly enabling the policy check could break existing deployments it was\ndecided to keep the existing behavior of the X509_VERIFY_PARAM_add0_policy()\nfunction.\n\nInstead the applications that require OpenSSL to perform certificate\npolicy check need to use X509_VERIFY_PARAM_set1_policies() or explicitly\nenable the policy check by calling X509_VERIFY_PARAM_set_flags() with\nthe X509_V_FLAG_POLICY_CHECK flag argument.\n\nCertificate policy checks are disabled by default in OpenSSL and are not\ncommonly used by applications.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-0466"
    },
    {
      "cve": "CVE-2023-1017",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds write vulnerability exists in TPM2.0\u0027s Module Library allowing writing of a 2-byte data past the end of TPM2.0 command in the CryptParameterDecryption routine. An attacker who can successfully exploit this vulnerability can lead to denial of service (crashing the TPM chip/process or rendering it unusable) and/or arbitrary code execution in the TPM context.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-1017"
    },
    {
      "cve": "CVE-2023-2124",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds memory access flaw was found in the Linux kernel\u2019s XFS file system in how a user restores an XFS image after failure (with a dirty log journal). This flaw allows a local user to crash or potentially escalate their privileges on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-2124"
    },
    {
      "cve": "CVE-2023-2269",
      "cwe": {
        "id": "CWE-667",
        "name": "Improper Locking"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A denial of service problem was found, due to a possible recursive locking scenario, resulting in a deadlock in table_clear in drivers/md/dm-ioctl.c in the Linux Kernel Device Mapper-Multipathing sub-component.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-2269"
    },
    {
      "cve": "CVE-2023-21255",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In multiple functions of binder.c, there is a possible memory corruption due to a use after free. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-21255"
    },
    {
      "cve": "CVE-2023-27321",
      "cwe": {
        "id": "CWE-1325",
        "name": "Improperly Controlled Sequential Memory Allocation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "OPC Foundation UA .NET Standard ConditionRefresh Resource Exhaustion Denial-of-Service Vulnerability. This vulnerability allows remote attackers to create a denial-of-service condition on affected installations of OPC Foundation UA .NET Standard. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of OPC UA ConditionRefresh requests. By sending a large number of requests, an attacker can consume all available resources on the server. An attacker can leverage this vulnerability to create a denial-of-service condition on the system. Was ZDI-CAN-20505.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-27321"
    },
    {
      "cve": "CVE-2023-28319",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use after free vulnerability exists in curl \u003cv8.1.0 in the way libcurl offers a feature to verify an SSH server\u0027s public key using a SHA 256 hash. When this check fails, libcurl would free the memory for the fingerprint before it returns an error message containing the (now freed) hash. This flaw risks inserting sensitive heap-based data into the error message that might be shown to users or otherwise get leaked and revealed.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-28319"
    },
    {
      "cve": "CVE-2023-35788",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in fl_set_geneve_opt in net/sched/cls_flower.c in the Linux kernel before 6.3.7. It allows an out-of-bounds write in the flower classifier code via TCA_FLOWER_KEY_ENC_OPTS_GENEVE packets. This may result in denial of service or privilege escalation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-35788"
    },
    {
      "cve": "CVE-2023-35823",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel before 6.3.2. A use-after-free was found in saa7134_finidev in drivers/media/pci/saa7134/saa7134-core.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-35823"
    },
    {
      "cve": "CVE-2023-35824",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel before 6.3.2. A use-after-free was found in dm1105_remove in drivers/media/pci/dm1105/dm1105.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-35824"
    },
    {
      "cve": "CVE-2023-35828",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel before 6.3.2. A use-after-free was found in renesas_usb3_remove in drivers/usb/gadget/udc/renesas_usb3.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-35828"
    },
    {
      "cve": "CVE-2023-35829",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel before 6.3.2. A use-after-free was found in rkvdec_remove in drivers/staging/media/rkvdec/rkvdec.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-35829"
    },
    {
      "cve": "CVE-2023-41910",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in lldpd before 1.0.17. By crafting a CDP PDU packet with specific CDP_TLV_ADDRESSES TLVs, a malicious actor can remotely force the lldpd daemon to perform an out-of-bounds read on heap memory. This occurs in cdp_decode in daemon/protocols/cdp.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-41910"
    },
    {
      "cve": "CVE-2023-50763",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The web server of affected products, if configured to allow the import of PKCS12 containers, could end up in an infinite loop when processing incomplete certificate chains.\r\n\r\nThis could allow an authenticated remote attacker to create a denial of service condition by importing specially crafted PKCS12 containers.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-50763"
    },
    {
      "cve": "CVE-2023-52474",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: IB/hfi1: Fix bugs with non-PAGE_SIZE-end multi-iovec user SDMA requests hfi1 user SDMA request processing has two bugs that can cause data corruption for user SDMA requests that have multiple payload iovecs where an iovec other than the tail iovec does not run up to the page boundary for the buffer pointed to by that iovec.a Here are the specific bugs: 1. user_sdma_txadd() does not use struct user_sdma_iovec-\u003eiov.iov_len. Rather, user_sdma_txadd() will add up to PAGE_SIZE bytes from iovec to the packet, even if some of those bytes are past iovec-\u003eiov.iov_len and are thus not intended to be in the packet. 2. user_sdma_txadd() and user_sdma_send_pkts() fail to advance to the next iovec in user_sdma_request-\u003eiovs when the current iovec is not PAGE_SIZE and does not contain enough data to complete the packet. The transmitted packet will contain the wrong data from the iovec pages. This has not been an issue with SDMA packets from hfi1 Verbs or PSM2 because they only produce iovecs that end short of PAGE_SIZE as the tail iovec of an SDMA request. Fixing these bugs exposes other bugs with the SDMA pin cache (struct mmu_rb_handler) that get in way of supporting user SDMA requests with multiple payload iovecs whose buffers do not end at PAGE_SIZE. So this commit fixes those issues as well. Here are the mmu_rb_handler bugs that non-PAGE_SIZE-end multi-iovec payload user SDMA requests can hit: 1. Overlapping memory ranges in mmu_rb_handler will result in duplicate pinnings. 2. When extending an existing mmu_rb_handler entry (struct mmu_rb_node), the mmu_rb code (1) removes the existing entry under a lock, (2) releases that lock, pins the new pages, (3) then reacquires the lock to insert the extended mmu_rb_node. If someone else comes in and inserts an overlapping entry between (2) and (3), insert in (3) will fail. The failure path code in this case unpins _all_ pages in either the original mmu_rb_node or the new mmu_rb_node that was inserted between (2) and (3). 3. In hfi1_mmu_rb_remove_unless_exact(), mmu_rb_node-\u003erefcount is incremented outside of mmu_rb_handler-\u003elock. As a result, mmu_rb_node could be evicted by another thread that gets mmu_rb_handler-\u003elock and checks mmu_rb_node-\u003erefcount before mmu_rb_node-\u003erefcount is incremented. 4. Related to #2 above, SDMA request submission failure path does not check mmu_rb_node-\u003erefcount before freeing mmu_rb_node object. If there are other SDMA requests in progress whose iovecs have pointers to the now-freed mmu_rb_node(s), those pointers to the now-freed mmu_rb nodes will be dereferenced when those SDMA requests complete.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-52474"
    },
    {
      "cve": "CVE-2024-0775",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free flaw was found in the __ext4_remount in fs/ext4/super.c in ext4 in the Linux kernel. This flaw allows a local user to cause an information leak problem while freeing the old quota file names before a potential failure, leading to a use-after-free.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2024-0775"
    }
  ]
}

{
  "document": {
    "acknowledgments": [
      {
        "organization": "Siemens ProductCERT",
        "summary": "reporting these vulnerabilities to CISA."
      }
    ],
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Disclosure is not limited",
      "tlp": {
        "label": "WHITE",
        "url": "https://us-cert.cisa.gov/tlp/"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the firmware version  \u003e= V3.1.0 and \u003c V3.1.5 for the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP (incl. SIPLUS variant).\n\nThese GNU/Linux vulnerabilities have been externally identified. \nSiemens has released new versions for the affected products and recommends to update to the latest versions.\n\nNote: This SSA advises vulnerabilities for firmware version V3.1 only; for versions \u003c V3.1 refer to Siemens Security Bulletin SSB-439005 (\nhttps://cert-portal.siemens.com/productcert/html/ssb-439005.html).",
        "title": "Summary"
      },
      {
        "category": "general",
        "text": "As a general security measure, Siemens strongly recommends to protect network access to devices with appropriate mechanisms. In order to operate the devices in a protected IT environment, Siemens recommends to configure the environment according to Siemens\u0027 operational guidelines for Industrial Security (Download: \nhttps://www.siemens.com/cert/operational-guidelines-industrial-security), and to follow the recommendations in the product manuals.\nAdditional information on Industrial Security by Siemens can be found at: https://www.siemens.com/industrialsecurity",
        "title": "General Recommendations"
      },
      {
        "category": "general",
        "text": "For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories",
        "title": "Additional Resources"
      },
      {
        "category": "legal_disclaimer",
        "text": "The use of Siemens Security Advisories is subject to the terms and conditions listed on: https://www.siemens.com/productcert/terms-of-use.",
        "title": "Terms of Use"
      },
      {
        "category": "legal_disclaimer",
        "text": "All information products included in https://us-cert.cisa.gov/ics are provided \"as is\" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see https://us-cert.cisa.gov/tlp/.",
        "title": "Legal Notice"
      },
      {
        "category": "other",
        "text": "This ICSA is a verbatim republication of Siemens ProductCERT SSA-398330 from a direct conversion of their vendor\u0027s Common Security Advisory Framework (CSAF) advisory. This is republished to CISA\u0027s website as a means of increasing visibility and is provided \"as-is\" for informational purposes only. CISA is not responsible for the editorial or technical accuracy of republished advisories and provides no warranties of any kind regarding any information contained within this advisory.  Further, CISA does not endorse any commercial product or service.  Please contact Siemens ProductCERT directly for any questions regarding this advisory.",
        "title": "Advisory Conversion Disclaimer"
      },
      {
        "category": "other",
        "text": "Critical Manufacturing",
        "title": "Critical infrastructure sectors"
      },
      {
        "category": "other",
        "text": "Worldwide",
        "title": "Countries/areas deployed"
      },
      {
        "category": "other",
        "text": "Germany",
        "title": "Company headquarters location"
      },
      {
        "category": "general",
        "text": "CISA recommends users take defensive measures to minimize the exploitation risk of this vulnerability.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Minimize network exposure for all control system devices and/or systems, and ensure they are not accessible from the internet.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Locate control system networks and remote devices behind firewalls and isolate them from business networks.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "When remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most recent version available. Also recognize VPN is only as secure as its connected devices.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets. Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.",
        "title": "Recommended Practices"
      }
    ],
    "publisher": {
      "category": "other",
      "contact_details": "central@cisa.dhs.gov",
      "name": "CISA",
      "namespace": "https://www.cisa.gov/"
    },
    "references": [
      {
        "category": "self",
        "summary": "SSA-398330: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP  \u003e= V3.1.0 and \u003c V3.1.5 - CSAF Version",
        "url": "https://cert-portal.siemens.com/productcert/csaf/ssa-398330.json"
      },
      {
        "category": "self",
        "summary": "SSA-398330: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP  \u003e= V3.1.0 and \u003c V3.1.5 - HTML Version",
        "url": "https://cert-portal.siemens.com/productcert/html/ssa-398330.html"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-23-348-10 JSON",
        "url": "https://raw.githubusercontent.com/cisagov/CSAF/develop/csaf_files/OT/white/2023/icsa-23-348-10.json"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-23-348-10 - Web Version",
        "url": "https://www.cisa.gov/news-events/ics-advisories/icsa-23-348-10"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/alerts/ICS-ALERT-10-301-01"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/resources-tools/resources/ics-recommended-practices"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/topics/industrial-control-systems"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/sites/default/files/publications/Cybersecurity_Best_Practices_for_Industrial_Control_Systems.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/tips/ICS-TIP-12-146-01B"
      }
    ],
    "title": "Siemens SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP V3.1",
    "tracking": {
      "current_release_date": "2025-06-10T00:00:00.000000Z",
      "generator": {
        "date": "2025-06-12T16:06:29.713146Z",
        "engine": {
          "name": "CISA CSAF Generator",
          "version": "1.0.0"
        }
      },
      "id": "ICSA-23-348-10",
      "initial_release_date": "2023-12-12T00:00:00.000000Z",
      "revision_history": [
        {
          "date": "2023-12-12T00:00:00.000000Z",
          "legacy_version": "1.0",
          "number": "1",
          "summary": "Publication Date"
        },
        {
          "date": "2024-01-09T00:00:00.000000Z",
          "legacy_version": "1.1",
          "number": "2",
          "summary": "Added CVE-2021-44879, CVE-2023-46218, CVE-2023-46219, and CVE-2023-48795"
        },
        {
          "date": "2024-02-13T00:00:00.000000Z",
          "legacy_version": "1.2",
          "number": "3",
          "summary": "Added CVE-2023-45898, CVE-2023-46862, CVE-2023-6121, CVE-2023-6817, CVE-2023-6931, CVE-2023-6932, CVE-2024-0584"
        },
        {
          "date": "2024-03-12T00:00:00.000000Z",
          "legacy_version": "1.3",
          "number": "4",
          "summary": "Added CVE-2023-52425, CVE-2023-52426, CVE-2023-45918"
        },
        {
          "date": "2024-04-09T00:00:00.000000Z",
          "legacy_version": "1.4",
          "number": "5",
          "summary": "Added CVE-2024-28757"
        },
        {
          "date": "2024-05-14T00:00:00.000000Z",
          "legacy_version": "1.5",
          "number": "6",
          "summary": "Added CVE-2024-2004, CVE-2024-2379, CVE-2024-2398, CVE-2024-2466, CVE-2024-2511, CVE-2024-28085, CVE-2024-28182, CVE-2024-28834, CVE-2024-28835"
        },
        {
          "date": "2024-06-11T00:00:00.000000Z",
          "legacy_version": "1.6",
          "number": "7",
          "summary": "Added CVE-2024-2961, CVE-2024-33599, CVE-2024-33600, CVE-2024-33601, CVE-2024-33602, CVE-2024-34459"
        },
        {
          "date": "2024-07-09T00:00:00.000000Z",
          "legacy_version": "1.7",
          "number": "8",
          "summary": "Added CVE-2024-5535, CVE-2024-5742"
        },
        {
          "date": "2024-08-13T00:00:00.000000Z",
          "legacy_version": "1.8",
          "number": "9",
          "summary": "Added CVE-2017-15422, CVE-2024-7264, CVE-2024-37370, CVE-2024-37371"
        },
        {
          "date": "2024-10-08T00:00:00.000000Z",
          "legacy_version": "1.9",
          "number": "10",
          "summary": "Added CVE-2024-6409, CVE-2024-8096, CVE-2024-45490, CVE-2024-45491, CVE-2024-45492"
        },
        {
          "date": "2024-11-12T00:00:00.000000Z",
          "legacy_version": "2.0",
          "number": "11",
          "summary": "Added CVE-2024-2236, CVE-2024-9143"
        },
        {
          "date": "2024-12-10T00:00:00.000000Z",
          "legacy_version": "2.1",
          "number": "12",
          "summary": "Added CVE-2024-50602, CVE-2024-52533"
        },
        {
          "date": "2025-01-14T00:00:00.000000Z",
          "legacy_version": "2.2",
          "number": "13",
          "summary": "Added CVE-2024-11053"
        },
        {
          "date": "2025-02-11T00:00:00.000000Z",
          "legacy_version": "2.3",
          "number": "14",
          "summary": "Added multiple CVEs"
        },
        {
          "date": "2025-03-11T00:00:00.000000Z",
          "legacy_version": "2.4",
          "number": "15",
          "summary": "Added CVE-2023-52622, CVE-2024-12133, -12243, -26645, -26671, -26679, -26772, -26773, -26777, -26805, -26923, -27020, -27032, -36017, -36484, -36904, -36905, -36934, -39487, -41046, -42106, -42131, -42154, -43871, -44944, -44965, -46743, -46745, -46750, -47684, -47701, -47737, -49881, -49884, -49948, -49949, -49952, -49997, -50006, -50040, -50045, -50251, -50262, -50299, -50301, -53057, -53140, -53165, -53217, CVE-2025-0167, -0395, -0665, -0725, -26465, -26466"
        },
        {
          "date": "2025-04-08T00:00:00.000000Z",
          "legacy_version": "2.5",
          "number": "16",
          "summary": "Added CVE-2025-21694, CVE-2025-1390, CVE-2024-8176, CVE-2024-57901, CVE-2024-57884, CVE-2024-56780, CVE-2024-56779, CVE-2024-56770, CVE-2024-56650, CVE-2024-56644, CVE-2024-56606, CVE-2024-56601, CVE-2024-56600, CVE-2024-56570, CVE-2024-56569, CVE-2024-53164, CVE-2024-53124, CVE-2024-52332, CVE-2024-48881, CVE-2024-47707, CVE-2024-12243"
        },
        {
          "date": "2025-06-10T00:00:00.000000Z",
          "legacy_version": "2.6",
          "number": "17",
          "summary": "Added fix for SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP incl. SIPLUS variants"
        }
      ],
      "status": "final",
      "version": "17"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "vers:all/\u003e=V3.1.0|\u003cV3.1.5",
                "product": {
                  "name": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)",
                  "product_id": "CSAFPID-0001",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6ES7518-4AX00-1AB0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "vers:all/\u003e=V3.1.0|\u003cV3.1.5",
                "product": {
                  "name": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)",
                  "product_id": "CSAFPID-0002",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6ES7518-4AX00-1AC0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "vers:all/\u003e=V3.1.0|\u003cV3.1.5",
                "product": {
                  "name": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)",
                  "product_id": "CSAFPID-0003",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6ES7518-4FX00-1AB0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "vers:all/\u003e=V3.1.0|\u003cV3.1.5",
                "product": {
                  "name": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)",
                  "product_id": "CSAFPID-0004",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6ES7518-4FX00-1AC0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "vers:all/\u003e=V3.1.0|\u003cV3.1.5",
                "product": {
                  "name": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)",
                  "product_id": "CSAFPID-0005",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6AG1518-4AX00-4AC0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)"
          }
        ],
        "category": "vendor",
        "name": "Siemens"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2013-0340",
      "cwe": {
        "id": "CWE-611",
        "name": "Improper Restriction of XML External Entity Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "expat 2.1.0 and earlier does not properly handle entities expansion unless an application developer uses the XML_SetEntityDeclHandler function, which allows remote attackers to cause a denial of service (resource consumption), send HTTP requests to intranet servers, or read arbitrary files via a crafted XML document, aka an XML External Entity (XXE) issue.  NOTE: it could be argued that because expat already provides the ability to disable external entity expansion, the responsibility for resolving this issue lies with application developers; according to this argument, this entry should be REJECTed, and each affected application would need its own CVE.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2013-0340"
    },
    {
      "cve": "CVE-2013-4235",
      "cwe": {
        "id": "CWE-367",
        "name": "Time-of-check Time-of-use (TOCTOU) Race Condition"
      },
      "notes": [
        {
          "category": "summary",
          "text": "shadow: TOCTOU (time-of-check time-of-use) race condition when copying and removing directory trees",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:H/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2013-4235"
    },
    {
      "cve": "CVE-2014-7209",
      "cwe": {
        "id": "CWE-77",
        "name": "Improper Neutralization of Special Elements used in a Command (\u0027Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "run-mailcap in the Debian mime-support package before 3.52-1+deb7u1 allows context-dependent attackers to execute arbitrary commands via shell metacharacters in a filename.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.0,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:R/S:C/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2014-7209"
    },
    {
      "cve": "CVE-2015-20107",
      "cwe": {
        "id": "CWE-77",
        "name": "Improper Neutralization of Special Elements used in a Command (\u0027Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Python (aka CPython) up to 3.10.8, the mailcap module does not add escape characters into commands discovered in the system mailcap file. This may allow attackers to inject shell commands into applications that call mailcap.findmatch with untrusted input (if they lack validation of user-provided filenames or arguments). The fix is also back-ported to 3.7, 3.8, 3.9",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.6,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:H/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2015-20107"
    },
    {
      "cve": "CVE-2016-3189",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Use-after-free vulnerability in bzip2recover in bzip2 1.0.6 allows remote attackers to cause a denial of service (crash) via a crafted bzip2 file, related to block ends set to before the start of the block.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2016-3189"
    },
    {
      "cve": "CVE-2016-3709",
      "cwe": {
        "id": "CWE-79",
        "name": "Improper Neutralization of Input During Web Page Generation (\u0027Cross-site Scripting\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Possible cross-site scripting vulnerability in libxml after commit 960f0e2.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2016-3709"
    },
    {
      "cve": "CVE-2016-4658",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "xpointer.c in libxml2 before 2.9.5 (as used in Apple iOS before 10, OS X before 10.12, tvOS before 10, and watchOS before 3, and other products) does not forbid namespace nodes in XPointer ranges, which allows remote attackers to execute arbitrary code or cause a denial of service (use-after-free and memory corruption) via a crafted XML document.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2016-4658"
    },
    {
      "cve": "CVE-2016-5131",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Use-after-free vulnerability in libxml2 through 2.9.4, as used in Google Chrome before 52.0.2743.82, allows remote attackers to cause a denial of service or possibly have unspecified other impact via vectors related to the XPointer range-to function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2016-5131"
    },
    {
      "cve": "CVE-2016-9318",
      "cwe": {
        "id": "CWE-611",
        "name": "Improper Restriction of XML External Entity Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libxml2 2.9.4 and earlier, as used in XMLSec 1.2.23 and earlier and other products, does not offer a flag directly indicating that the current document may be read but other files may not be opened, which makes it easier for remote attackers to conduct XML External Entity (XXE) attacks via a crafted document.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2016-9318"
    },
    {
      "cve": "CVE-2016-10228",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The iconv program in the GNU C Library (aka glibc or libc6) 2.31 and earlier, when invoked with multiple suffixes in the destination encoding (TRANSLATE or IGNORE) along with the -c option, enters an infinite loop when processing invalid multi-byte input sequences, leading to a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2016-10228"
    },
    {
      "cve": "CVE-2016-10739",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the GNU C Library (aka glibc or libc6) through 2.28, the getaddrinfo function would successfully parse a string that contained an IPv4 address followed by whitespace and arbitrary characters, which could lead applications to incorrectly assume that it had parsed a valid string, without the possibility of embedded HTTP headers or other potentially dangerous substrings.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2016-10739"
    },
    {
      "cve": "CVE-2017-0663",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A remote code execution vulnerability in libxml2 could enable an attacker using a specially crafted file to execute arbitrary code within the context of an unprivileged process. This issue is rated as High due to the possibility of remote code execution in an application that uses this library. Product: Android. Versions: 4.4.4, 5.0.2, 5.1.1, 6.0, 6.0.1, 7.0, 7.1.1, 7.1.2. Android ID: A-37104170.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2017-0663"
    },
    {
      "cve": "CVE-2017-7375",
      "cwe": {
        "id": "CWE-611",
        "name": "Improper Restriction of XML External Entity Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw in libxml2 allows remote XML entity inclusion with default parser flags (i.e., when the caller did not request entity substitution, DTD validation, external DTD subset loading, or default DTD attributes). Depending on the context, this may expose a higher-risk attack surface in libxml2 not usually reachable with default parser flags, and expose content from local files, HTTP, or FTP servers (which might be otherwise unreachable).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2017-7375"
    },
    {
      "cve": "CVE-2017-7376",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer overflow in libxml2 allows remote attackers to execute arbitrary code by leveraging an incorrect limit for port values when handling redirects.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2017-7376"
    },
    {
      "cve": "CVE-2017-9047",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A buffer overflow was discovered in libxml2 20904-GITv2.9.4-16-g0741801. The function xmlSnprintfElementContent in valid.c is supposed to recursively dump the element content definition into a char buffer \u0027buf\u0027 of size \u0027size\u0027. The variable len is assigned strlen(buf). If the content-\u003etype is XML_ELEMENT_CONTENT_ELEMENT, then (i) the content-\u003eprefix is appended to buf (if it actually fits) whereupon (ii) content-\u003ename is written to the buffer. However, the check for whether the content-\u003ename actually fits also uses \u0027len\u0027 rather than the updated buffer length strlen(buf). This allows us to write about \"size\" many bytes beyond the allocated memory. This vulnerability causes programs that use libxml2, such as PHP, to crash.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2017-9047"
    },
    {
      "cve": "CVE-2017-9048",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libxml2 20904-GITv2.9.4-16-g0741801 is vulnerable to a stack-based buffer overflow. The function xmlSnprintfElementContent in valid.c is supposed to recursively dump the element content definition into a char buffer \u0027buf\u0027 of size \u0027size\u0027. At the end of the routine, the function may strcat two more characters without checking whether the current strlen(buf) + 2 \u003c size. This vulnerability causes programs that use libxml2, such as PHP, to crash.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2017-9048"
    },
    {
      "cve": "CVE-2017-9049",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libxml2 20904-GITv2.9.4-16-g0741801 is vulnerable to a heap-based buffer over-read in the xmlDictComputeFastKey function in dict.c. This vulnerability causes programs that use libxml2, such as PHP, to crash. This vulnerability exists because of an incomplete fix for libxml2 Bug 759398.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2017-9049"
    },
    {
      "cve": "CVE-2017-9050",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libxml2 20904-GITv2.9.4-16-g0741801 is vulnerable to a heap-based buffer over-read in the xmlDictAddString function in dict.c. This vulnerability causes programs that use libxml2, such as PHP, to crash. This vulnerability exists because of an incomplete fix for CVE-2016-1839.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2017-9050"
    },
    {
      "cve": "CVE-2017-15422",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Integer overflow in international date handling in International Components for Unicode (ICU) for C/C++ before 60.1, as used in V8 in Google Chrome prior to 63.0.3239.84 and other products, allowed a remote attacker to perform an out of bounds memory read via a crafted HTML page.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2017-15422"
    },
    {
      "cve": "CVE-2017-16931",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "parser.c in libxml2 before 2.9.5 mishandles parameter-entity references because the NEXTL macro calls the xmlParserHandlePEReference function in the case of a \u0027%\u0027 character in a DTD name.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2017-16931"
    },
    {
      "cve": "CVE-2017-16932",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "parser.c in libxml2 before 2.9.5 does not prevent infinite recursion in parameter entities.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2017-16932"
    },
    {
      "cve": "CVE-2017-17512",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "sensible-browser in sensible-utils before 0.0.11 does not validate strings before launching the program specified by the BROWSER environment variable, which allows remote attackers to conduct argument-injection attacks via a crafted URL, as demonstrated by a --proxy-pac-file argument.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2017-17512"
    },
    {
      "cve": "CVE-2017-18258",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The xz_head function in xzlib.c in libxml2 before 2.9.6 allows remote attackers to cause a denial of service (memory consumption) via a crafted LZMA file, because the decoder functionality does not restrict memory usage to what is required for a legitimate file.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2017-18258"
    },
    {
      "cve": "CVE-2018-0495",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Libgcrypt before 1.7.10 and 1.8.x before 1.8.3 allows a memory-cache side-channel attack on ECDSA signatures that can be mitigated through the use of blinding during the signing process in the _gcry_ecc_ecdsa_sign function in cipher/ecc-ecdsa.c, aka the Return Of the Hidden Number Problem or ROHNP. To discover an ECDSA key, the attacker needs access to either the local machine or a different virtual machine on the same physical host.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2018-0495"
    },
    {
      "cve": "CVE-2018-12886",
      "cwe": {
        "id": "CWE-209",
        "name": "Generation of Error Message Containing Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "stack_protect_prologue in cfgexpand.c and stack_protect_epilogue in function.c in GNU Compiler Collection (GCC) 4.1 through 8 (under certain circumstances) generate instruction sequences when targeting ARM targets that spill the address of the stack protector guard, which allows an attacker to bypass the protection of -fstack-protector, -fstack-protector-all, -fstack-protector-strong, and -fstack-protector-explicit against stack overflow by controlling what the stack canary is compared against.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2018-12886"
    },
    {
      "cve": "CVE-2018-14404",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer dereference vulnerability exists in the xpath.c:xmlXPathCompOpEval() function of libxml2 through 2.9.8 when parsing an invalid XPath expression in the XPATH_OP_AND or XPATH_OP_OR case. Applications processing untrusted XSL format inputs with the use of the libxml2 library may be vulnerable to a denial of service attack due to a crash of the application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2018-14404"
    },
    {
      "cve": "CVE-2018-14567",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libxml2 2.9.8, if --with-lzma is used, allows remote attackers to cause a denial of service (infinite loop) via a crafted XML file that triggers LZMA_MEMLIMIT_ERROR, as demonstrated by xmllint, a different vulnerability than CVE-2015-8035 and CVE-2018-9251.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2018-14567"
    },
    {
      "cve": "CVE-2018-18928",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "International Components for Unicode (ICU) for C/C++ 63.1 has an integer overflow in number::impl::DecimalQuantity::toScientificString() in i18n/number_decimalquantity.cpp.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2018-18928"
    },
    {
      "cve": "CVE-2018-19591",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the GNU C Library (aka glibc or libc6) through 2.28, attempting to resolve a crafted hostname via getaddrinfo() leads to the allocation of a socket descriptor that is not closed. This is related to the if_nametoindex() function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2018-19591"
    },
    {
      "cve": "CVE-2018-20482",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU Tar through 1.30, when --sparse is used, mishandles file shrinkage during read access, which allows local users to cause a denial of service (infinite read loop in sparse_dump_region in sparse.c) by modifying a file that is supposed to be archived by a different user\u0027s process (e.g., a system backup running as root).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2018-20482"
    },
    {
      "cve": "CVE-2018-20843",
      "cwe": {
        "id": "CWE-611",
        "name": "Improper Restriction of XML External Entity Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libexpat in Expat before 2.2.7, XML input including XML names that contain a large number of colons could make the XML parser consume a high amount of RAM and CPU resources while processing (enough to be usable for denial-of-service attacks).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2018-20843"
    },
    {
      "cve": "CVE-2018-25032",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "zlib before 1.2.12 allows memory corruption when deflating (i.e., when compressing) if the input has many distant matches.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2018-25032"
    },
    {
      "cve": "CVE-2019-3855",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer overflow flaw which could lead to an out of bounds write was discovered in libssh2 before 1.8.1 in the way packets are read from the server. A remote attacker who compromises a SSH server may be able to execute code on the client system when a user connects to the server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-3855"
    },
    {
      "cve": "CVE-2019-3856",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer overflow flaw, which could lead to an out of bounds write, was discovered in libssh2 before 1.8.1 in the way keyboard prompt requests are parsed. A remote attacker who compromises a SSH server may be able to execute code on the client system when a user connects to the server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-3856"
    },
    {
      "cve": "CVE-2019-3857",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer overflow flaw which could lead to an out of bounds write was discovered in libssh2 before 1.8.1 in the way SSH_MSG_CHANNEL_REQUEST packets with an exit signal are parsed. A remote attacker who compromises a SSH server may be able to execute code on the client system when a user connects to the server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-3857"
    },
    {
      "cve": "CVE-2019-3858",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out of bounds read flaw was discovered in libssh2 before 1.8.1 when a specially crafted SFTP packet is received from the server. A remote attacker who compromises a SSH server may be able to cause a Denial of Service or read data in the client memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-3858"
    },
    {
      "cve": "CVE-2019-3859",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out of bounds read flaw was discovered in libssh2 before 1.8.1 in the _libssh2_packet_require and _libssh2_packet_requirev functions. A remote attacker who compromises a SSH server may be able to cause a Denial of Service or read data in the client memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-3859"
    },
    {
      "cve": "CVE-2019-3860",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out of bounds read flaw was discovered in libssh2 before 1.8.1 in the way SFTP packets with empty payloads are parsed. A remote attacker who compromises a SSH server may be able to cause a Denial of Service or read data in the client memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-3860"
    },
    {
      "cve": "CVE-2019-3861",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out of bounds read flaw was discovered in libssh2 before 1.8.1 in the way SSH packets with a padding length value greater than the packet length are parsed. A remote attacker who compromises a SSH server may be able to cause a Denial of Service or read data in the client memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-3861"
    },
    {
      "cve": "CVE-2019-3862",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out of bounds read flaw was discovered in libssh2 before 1.8.1 in the way SSH_MSG_CHANNEL_REQUEST packets with an exit status message and no payload are parsed. A remote attacker who compromises a SSH server may be able to cause a Denial of Service or read data in the client memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-3862"
    },
    {
      "cve": "CVE-2019-3863",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in libssh2 before 1.8.1. A server could send a multiple keyboard interactive response messages whose total length are greater than unsigned char max characters. This value is used as an index to copy memory causing in an out of bounds memory write error.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-3863"
    },
    {
      "cve": "CVE-2019-5018",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An exploitable use after free vulnerability exists in the window function functionality of Sqlite3 3.26.0. A specially crafted SQL command can cause a use after free vulnerability, potentially resulting in remote code execution. An attacker can send a malicious SQL command to trigger this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-5018"
    },
    {
      "cve": "CVE-2019-5094",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An exploitable code execution vulnerability exists in the quota file functionality of E2fsprogs 1.45.3. A specially crafted ext4 partition can cause an out-of-bounds write on the heap, resulting in code execution. An attacker can corrupt a partition to trigger this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-5094"
    },
    {
      "cve": "CVE-2019-5188",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A code execution vulnerability exists in the directory rehashing functionality of E2fsprogs e2fsck 1.45.4. A specially crafted ext4 directory can cause an out-of-bounds write on the stack, resulting in code execution. An attacker can corrupt a partition to trigger this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-5188"
    },
    {
      "cve": "CVE-2019-5435",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer overflow in curl\u0027s URL API results in a buffer overflow in libcurl 7.62.0 to and including 7.64.1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-5435"
    },
    {
      "cve": "CVE-2019-5436",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A heap buffer overflow in the TFTP receiving code allows for DoS or arbitrary code execution in libcurl versions 7.19.4 through 7.64.1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-5436"
    },
    {
      "cve": "CVE-2019-5443",
      "cwe": {
        "id": "CWE-427",
        "name": "Uncontrolled Search Path Element"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A non-privileged user or program can put code and a config file in a known non-privileged path (under C:/usr/local/) that will make curl \u003c= 7.65.1 automatically run the code (as an openssl \"engine\") on invocation. If that curl is invoked by a privileged user it can do anything it wants.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-5443"
    },
    {
      "cve": "CVE-2019-5481",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Double-free vulnerability in the FTP-kerberos code in cURL 7.52.0 to 7.65.3.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-5481"
    },
    {
      "cve": "CVE-2019-5482",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Heap buffer overflow in the TFTP protocol handler in cURL 7.19.4 to 7.65.3.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-5482"
    },
    {
      "cve": "CVE-2019-6109",
      "cwe": {
        "id": "CWE-116",
        "name": "Improper Encoding or Escaping of Output"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in OpenSSH 7.9. Due to missing character encoding in the progress display, a malicious server (or Man-in-The-Middle attacker) can employ crafted object names to manipulate the client output, e.g., by using ANSI control codes to hide additional files being transferred. This affects refresh_progress_meter() in progressmeter.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.8,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-6109"
    },
    {
      "cve": "CVE-2019-6110",
      "cwe": {
        "id": "CWE-838",
        "name": "Inappropriate Encoding for Output Context"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In OpenSSH 7.9, due to accepting and displaying arbitrary stderr output from the server, a malicious server (or Man-in-The-Middle attacker) can manipulate the client output, for example to use ANSI control codes to hide additional files being transferred.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.8,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-6110"
    },
    {
      "cve": "CVE-2019-6111",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in OpenSSH 7.9. Due to the scp implementation being derived from 1983 rcp, the server chooses which files/directories are sent to the client. However, the scp client only performs cursory validation of the object name returned (only directory traversal attacks are prevented). A malicious scp server (or Man-in-The-Middle attacker) can overwrite arbitrary files in the scp client target directory. If recursive operation (-r) is performed, the server can manipulate subdirectories as well (for example, to overwrite the .ssh/authorized_keys file).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-6111"
    },
    {
      "cve": "CVE-2019-6488",
      "cwe": {
        "id": "CWE-404",
        "name": "Improper Resource Shutdown or Release"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The string component in the GNU C Library (aka glibc or libc6) through 2.28, when running on the x32 architecture, incorrectly attempts to use a 64-bit register for size_t in assembly codes, which can lead to a segmentation fault or possibly unspecified other impact, as demonstrated by a crash in __memmove_avx_unaligned_erms in sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S during a memcpy.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-6488"
    },
    {
      "cve": "CVE-2019-7309",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the GNU C Library (aka glibc or libc6) through 2.29, the memcmp function for the x32 architecture can incorrectly return zero (indicating that the inputs are equal) because the RDX most significant bit is mishandled.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-7309"
    },
    {
      "cve": "CVE-2019-8457",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite3 from 3.6.0 to and including 3.27.2 is vulnerable to heap out-of-bound read in the rtreenode() function when handling invalid rtree tables.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-8457"
    },
    {
      "cve": "CVE-2019-9169",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the GNU C Library (aka glibc or libc6) through 2.29, proceed_next_node in posix/regexec.c has a heap-based buffer over-read via an attempted case-insensitive regular-expression match.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-9169"
    },
    {
      "cve": "CVE-2019-9636",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Python 2.7.x through 2.7.16 and 3.x through 3.7.2 is affected by: Improper Handling of Unicode Encoding (with an incorrect netloc) during NFKC normalization. The impact is: Information disclosure (credentials, cookies, etc. that are cached against a given hostname). The components are: urllib.parse.urlsplit, urllib.parse.urlparse. The attack vector is: A specially crafted URL could be incorrectly parsed to locate cookies or authentication data and send that information to a different host than when parsed correctly. This is fixed in: v2.7.17, v2.7.17rc1, v2.7.18, v2.7.18rc1; v3.5.10, v3.5.10rc1, v3.5.7, v3.5.8, v3.5.8rc1, v3.5.8rc2, v3.5.9; v3.6.10, v3.6.10rc1, v3.6.11, v3.6.11rc1, v3.6.12, v3.6.9, v3.6.9rc1; v3.7.3, v3.7.3rc1, v3.7.4, v3.7.4rc1, v3.7.4rc2, v3.7.5, v3.7.5rc1, v3.7.6, v3.7.6rc1, v3.7.7, v3.7.7rc1, v3.7.8, v3.7.8rc1, v3.7.9.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-9636"
    },
    {
      "cve": "CVE-2019-9674",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Lib/zipfile.py in Python through 3.7.2 allows remote attackers to cause a denial of service (resource consumption) via a ZIP bomb.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-9674"
    },
    {
      "cve": "CVE-2019-9740",
      "cwe": {
        "id": "CWE-93",
        "name": "Improper Neutralization of CRLF Sequences (\u0027CRLF Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in urllib2 in Python 2.x through 2.7.16 and urllib in Python 3.x through 3.7.3. CRLF injection is possible if the attacker controls a url parameter, as demonstrated by the first argument to urllib.request.urlopen with \\r\\n (specifically in the query string after a ? character) followed by an HTTP header or a Redis command. This is fixed in: v2.7.17, v2.7.17rc1, v2.7.18, v2.7.18rc1; v3.5.10, v3.5.10rc1, v3.5.8, v3.5.8rc1, v3.5.8rc2, v3.5.9; v3.6.10, v3.6.10rc1, v3.6.11, v3.6.11rc1, v3.6.12, v3.6.9, v3.6.9rc1; v3.7.4, v3.7.4rc1, v3.7.4rc2, v3.7.5, v3.7.5rc1, v3.7.6, v3.7.6rc1, v3.7.7, v3.7.7rc1, v3.7.8, v3.7.8rc1, v3.7.9.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-9740"
    },
    {
      "cve": "CVE-2019-9923",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "pax_decode_header in sparse.c in GNU Tar before 1.32 had a NULL pointer dereference when parsing certain archives that have malformed extended headers.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-9923"
    },
    {
      "cve": "CVE-2019-9936",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite 3.27.2, running fts5 prefix queries inside a transaction could trigger a heap-based buffer over-read in fts5HashEntrySort in sqlite3.c, which may lead to an information leak. This is related to ext/fts5/fts5_hash.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-9936"
    },
    {
      "cve": "CVE-2019-9937",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite 3.27.2, interleaving reads and writes in a single transaction with an fts5 virtual table will lead to a NULL Pointer Dereference in fts5ChunkIterate in sqlite3.c. This is related to ext/fts5/fts5_hash.c and ext/fts5/fts5_index.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-9937"
    },
    {
      "cve": "CVE-2019-9947",
      "cwe": {
        "id": "CWE-93",
        "name": "Improper Neutralization of CRLF Sequences (\u0027CRLF Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in urllib2 in Python 2.x through 2.7.16 and urllib in Python 3.x through 3.7.3. CRLF injection is possible if the attacker controls a url parameter, as demonstrated by the first argument to urllib.request.urlopen with \\r\\n (specifically in the path component of a URL that lacks a ? character) followed by an HTTP header or a Redis command. This is similar to the CVE-2019-9740 query string issue. This is fixed in: v2.7.17, v2.7.17rc1, v2.7.18, v2.7.18rc1; v3.5.10, v3.5.10rc1, v3.5.8, v3.5.8rc1, v3.5.8rc2, v3.5.9; v3.6.10, v3.6.10rc1, v3.6.11, v3.6.11rc1, v3.6.12, v3.6.9, v3.6.9rc1; v3.7.4, v3.7.4rc1, v3.7.4rc2, v3.7.5, v3.7.5rc1, v3.7.6, v3.7.6rc1, v3.7.7, v3.7.7rc1, v3.7.8, v3.7.8rc1, v3.7.9.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-9947"
    },
    {
      "cve": "CVE-2019-9948",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "urllib in Python 2.x through 2.7.16 supports the local_file: scheme, which makes it easier for remote attackers to bypass protection mechanisms that blacklist file: URIs, as demonstrated by triggering a urllib.urlopen(\u0027local_file:///etc/passwd\u0027) call.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-9948"
    },
    {
      "cve": "CVE-2019-10160",
      "cwe": {
        "id": "CWE-172",
        "name": "Encoding Error"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A security regression of CVE-2019-9636 was discovered in python since commit d537ab0ff9767ef024f26246899728f0116b1ec3 affecting versions 2.7, 3.5, 3.6, 3.7 and from v3.8.0a4 through v3.8.0b1, which still allows an attacker to exploit CVE-2019-9636 by abusing the user and password parts of a URL. When an application parses user-supplied URLs to store cookies, authentication credentials, or other kind of information, it is possible for an attacker to provide specially crafted URLs to make the application locate host-related information (e.g. cookies, authentication data) and send them to a different host than where it should, unlike if the URLs had been correctly parsed. The result of an attack may vary based on the application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-10160"
    },
    {
      "cve": "CVE-2019-11360",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A buffer overflow in iptables-restore in netfilter iptables 1.8.2 allows an attacker to (at least) crash the program or potentially gain code execution via a specially crafted iptables-save file. This is related to add_param_to_argv in xshared.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.2,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-11360"
    },
    {
      "cve": "CVE-2019-12290",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU libidn2 before 2.2.0 fails to perform the roundtrip checks specified in RFC3490 Section 4.2 when converting A-labels to U-labels. This makes it possible in some circumstances for one domain to impersonate another. By creating a malicious domain that matches a target domain except for the inclusion of certain punycoded Unicode characters (that would be discarded when converted first to a Unicode label and then back to an ASCII label), arbitrary domains can be impersonated.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-12290"
    },
    {
      "cve": "CVE-2019-12900",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "BZ2_decompress in decompress.c in bzip2 through 1.0.6 has an out-of-bounds write when there are many selectors.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-12900"
    },
    {
      "cve": "CVE-2019-12904",
      "cwe": {
        "id": "CWE-668",
        "name": "Exposure of Resource to Wrong Sphere"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Libgcrypt 1.8.4, the C implementation of AES is vulnerable to a flush-and-reload side-channel attack because physical addresses are available to other processes. (The C implementation is used on platforms where an assembly-language implementation is unavailable.) NOTE: the vendor\u0027s position is that the issue report cannot be validated because there is no description of an attack",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-12904"
    },
    {
      "cve": "CVE-2019-13057",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the server in OpenLDAP before 2.4.48. When the server administrator delegates rootDN (database admin) privileges for certain databases but wants to maintain isolation (e.g., for multi-tenant deployments), slapd does not properly stop a rootDN from requesting authorization as an identity from another database during a SASL bind or with a proxyAuthz (RFC 4370) control. (It is not a common configuration to deploy a system where the server administrator and a DB administrator enjoy different levels of trust.)",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-13057"
    },
    {
      "cve": "CVE-2019-13565",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in OpenLDAP 2.x before 2.4.48. When using SASL authentication and session encryption, and relying on the SASL security layers in slapd access controls, it is possible to obtain access that would otherwise be denied via a simple bind for any identity covered in those ACLs. After the first SASL bind is completed, the sasl_ssf value is retained for all new non-SASL connections. Depending on the ACL configuration, this can affect different types of operations (searches, modifications, etc.). In other words, a successful authorization step completed by one user affects the authorization requirement for a different user.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-13565"
    },
    {
      "cve": "CVE-2019-13627",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "It was discovered that there was a ECDSA timing attack in the libgcrypt20 cryptographic library. Version affected: 1.8.4-5, 1.7.6-2+deb9u3, and 1.6.3-2+deb8u4. Versions fixed: 1.8.5-2 and 1.6.3-2+deb8u7.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:N/UI:R/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-13627"
    },
    {
      "cve": "CVE-2019-15847",
      "cwe": {
        "id": "CWE-331",
        "name": "Insufficient Entropy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The POWER9 backend in GNU Compiler Collection (GCC) before version 10 could optimize multiple calls of the __builtin_darn intrinsic into a single call, thus reducing the entropy of the random number generator. This occurred because a volatile operation was not specified. For example, within a single execution of a program, the output of every __builtin_darn() call may be the same.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-15847"
    },
    {
      "cve": "CVE-2019-15903",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libexpat before 2.2.8, crafted XML input could fool the parser into changing from DTD parsing to document parsing too early; a consecutive call to XML_GetCurrentLineNumber (or XML_GetCurrentColumnNumber) then resulted in a heap-based buffer over-read.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-15903"
    },
    {
      "cve": "CVE-2019-16056",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in Python through 2.7.16, 3.x through 3.5.7, 3.6.x through 3.6.9, and 3.7.x through 3.7.4. The email module wrongly parses email addresses that contain multiple @ characters. An application that uses the email module and implements some kind of checks on the From/To headers of a message could be tricked into accepting an email address that should be denied. An attack may be the same as in CVE-2019-11340; however, this CVE applies to Python more generally.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-16056"
    },
    {
      "cve": "CVE-2019-16168",
      "cwe": {
        "id": "CWE-369",
        "name": "Divide By Zero"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite through 3.29.0, whereLoopAddBtreeIndex in sqlite3.c can crash a browser or other application because of missing validation of a sqlite_stat1 sz field, aka a \"severe division by zero in the query planner.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-16168"
    },
    {
      "cve": "CVE-2019-16905",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "OpenSSH 7.7 through 7.9 and 8.x before 8.1, when compiled with an experimental key type, has a pre-authentication integer overflow if a client or server is configured to use a crafted XMSS key. This leads to memory corruption and local code execution because of an error in the XMSS key parsing algorithm. NOTE: the XMSS implementation is considered experimental in all released OpenSSH versions, and there is no supported way to enable it when building portable OpenSSH.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-16905"
    },
    {
      "cve": "CVE-2019-17498",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libssh2 v1.9.0 and earlier versions, the SSH_MSG_DISCONNECT logic in packet.c has an integer overflow in a bounds check, enabling an attacker to specify an arbitrary (out-of-bounds) offset for a subsequent memory read. A crafted SSH server may be able to disclose sensitive information or cause a denial of service condition on the client system when a user connects to the server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-17498"
    },
    {
      "cve": "CVE-2019-17543",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "LZ4 before 1.9.2 has a heap-based buffer overflow in LZ4_write32 (related to LZ4_compress_destSize), affecting applications that call LZ4_compress_fast with a large input. (This issue can also lead to data corruption.) NOTE: the vendor states \"only a few specific / uncommon usages of the API are at risk.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-17543"
    },
    {
      "cve": "CVE-2019-17594",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a heap-based buffer over-read in the _nc_find_entry function in tinfo/comp_hash.c in the terminfo library in ncurses before 6.1-20191012.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-17594"
    },
    {
      "cve": "CVE-2019-17595",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a heap-based buffer over-read in the fmt_entry function in tinfo/comp_hash.c in the terminfo library in ncurses before 6.1-20191012.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:L/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-17595"
    },
    {
      "cve": "CVE-2019-18224",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "idn2_to_ascii_4i in lib/lookup.c in GNU libidn2 before 2.1.1 has a heap-based buffer overflow via a long domain string.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-18224"
    },
    {
      "cve": "CVE-2019-18276",
      "cwe": {
        "id": "CWE-273",
        "name": "Improper Check for Dropped Privileges"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in disable_priv_mode in shell.c in GNU Bash through 5.0 patch 11. By default, if Bash is run with its effective UID not equal to its real UID, it will drop privileges by setting its effective UID to its real UID. However, it does so incorrectly. On Linux and other systems that support \"saved UID\" functionality, the saved UID is not dropped. An attacker with command execution in the shell can use \"enable -f\" for runtime loading of a new builtin, which can be a shared object that calls setuid() and therefore regains privileges. However, binaries running with an effective UID of 0 are unaffected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-18276"
    },
    {
      "cve": "CVE-2019-18348",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in urllib2 in Python 2.x through 2.7.17 and urllib in Python 3.x through 3.8.0. CRLF injection is possible if the attacker controls a url parameter, as demonstrated by the first argument to urllib.request.urlopen with \\r\\n (specifically in the host component of a URL) followed by an HTTP header. This is similar to the CVE-2019-9740 query string issue and the CVE-2019-9947 path string issue. (This is not exploitable when glibc has CVE-2016-10739 fixed.). This is fixed in: v2.7.18, v2.7.18rc1; v3.5.10, v3.5.10rc1; v3.6.11, v3.6.11rc1, v3.6.12; v3.7.8, v3.7.8rc1, v3.7.9; v3.8.3, v3.8.3rc1, v3.8.4, v3.8.4rc1, v3.8.5, v3.8.6, v3.8.6rc1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-18348"
    },
    {
      "cve": "CVE-2019-19126",
      "cwe": {
        "id": "CWE-665",
        "name": "Improper Initialization"
      },
      "notes": [
        {
          "category": "summary",
          "text": "On the x86-64 architecture, the GNU C Library (aka glibc) before 2.31 fails to ignore the LD_PREFER_MAP_32BIT_EXEC environment variable during program execution after a security transition, allowing local attackers to restrict the possible mapping addresses for loaded libraries and thus bypass ASLR for a setuid program.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19126"
    },
    {
      "cve": "CVE-2019-19242",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite 3.30.1 mishandles pExpr-\u003ey.pTab, as demonstrated by the TK_COLUMN case in sqlite3ExprCodeTarget in expr.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19242"
    },
    {
      "cve": "CVE-2019-19244",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Select in select.c in SQLite 3.30.1 allows a crash if a sub-select uses both DISTINCT and window functions, and also has certain ORDER BY usage.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19244"
    },
    {
      "cve": "CVE-2019-19317",
      "cwe": {
        "id": "CWE-681",
        "name": "Incorrect Conversion between Numeric Types"
      },
      "notes": [
        {
          "category": "summary",
          "text": "lookupName in resolve.c in SQLite 3.30.1 omits bits from the colUsed bitmask in the case of a generated column, which allows attackers to cause a denial of service or possibly have unspecified other impact.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19317"
    },
    {
      "cve": "CVE-2019-19603",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite 3.30.1 mishandles certain SELECT statements with a nonexistent VIEW, leading to an application crash.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19603"
    },
    {
      "cve": "CVE-2019-19645",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "alter.c in SQLite through 3.30.1 allows attackers to trigger infinite recursion via certain types of self-referential views in conjunction with ALTER TABLE statements.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19645"
    },
    {
      "cve": "CVE-2019-19646",
      "cwe": {
        "id": "CWE-754",
        "name": "Improper Check for Unusual or Exceptional Conditions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "pragma.c in SQLite through 3.30.1 mishandles NOT NULL in an integrity_check PRAGMA command in certain cases of generated columns.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19646"
    },
    {
      "cve": "CVE-2019-19880",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "exprListAppendList in window.c in SQLite 3.30.1 allows attackers to trigger an invalid pointer dereference because constant integer values in ORDER BY clauses of window definitions are mishandled.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19880"
    },
    {
      "cve": "CVE-2019-19906",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "cyrus-sasl (aka Cyrus SASL) 2.1.27 has an out-of-bounds write leading to unauthenticated remote denial-of-service in OpenLDAP via a malformed LDAP packet. The OpenLDAP crash is ultimately caused by an off-by-one error in _sasl_add_string in common.c in cyrus-sasl.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19906"
    },
    {
      "cve": "CVE-2019-19923",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "flattenSubquery in select.c in SQLite 3.30.1 mishandles certain uses of SELECT DISTINCT involving a LEFT JOIN in which the right-hand side is a view. This can cause a NULL pointer dereference (or incorrect results).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19923"
    },
    {
      "cve": "CVE-2019-19924",
      "cwe": {
        "id": "CWE-755",
        "name": "Improper Handling of Exceptional Conditions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite 3.30.1 mishandles certain parser-tree rewriting, related to expr.c, vdbeaux.c, and window.c. This is caused by incorrect sqlite3WindowRewrite() error handling.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19924"
    },
    {
      "cve": "CVE-2019-19925",
      "cwe": {
        "id": "CWE-434",
        "name": "Unrestricted Upload of File with Dangerous Type"
      },
      "notes": [
        {
          "category": "summary",
          "text": "zipfileUpdate in ext/misc/zipfile.c in SQLite 3.30.1 mishandles a NULL pathname during an update of a ZIP archive.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19925"
    },
    {
      "cve": "CVE-2019-19926",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "multiSelect in select.c in SQLite 3.30.1 mishandles certain errors during parsing, as demonstrated by errors from sqlite3WindowRewrite() calls. NOTE: this vulnerability exists because of an incomplete fix for CVE-2019-19880.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19926"
    },
    {
      "cve": "CVE-2019-19956",
      "cwe": {
        "id": "CWE-772",
        "name": "Missing Release of Resource after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "xmlParseBalancedChunkMemoryRecover in parser.c in libxml2 before 2.9.10 has a memory leak related to newDoc-\u003eoldNs.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19956"
    },
    {
      "cve": "CVE-2019-19959",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ext/misc/zipfile.c in SQLite 3.30.1 mishandles certain uses of INSERT INTO in situations involving embedded \u0027\\0\u0027 characters in filenames, leading to a memory-management error that can be detected by (for example) valgrind.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19959"
    },
    {
      "cve": "CVE-2019-20218",
      "cwe": {
        "id": "CWE-755",
        "name": "Improper Handling of Exceptional Conditions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "selectExpander in select.c in SQLite 3.30.1 proceeds with WITH stack unwinding even after a parsing error.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-20218"
    },
    {
      "cve": "CVE-2019-20367",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nlist.c in libbsd before 0.10.0 has an out-of-bounds read during a comparison for a symbol name from the string table (strtab).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-20367"
    },
    {
      "cve": "CVE-2019-20388",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "xmlSchemaPreRun in xmlschemas.c in libxml2 2.9.10 allows an xmlSchemaValidateStream memory leak.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-20388"
    },
    {
      "cve": "CVE-2019-20795",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "iproute2 before 5.1.0 has a use-after-free in get_netnsid_from_name in ip/ipnetns.c. NOTE: security relevance may be limited to certain uses of setuid that, although not a default, are sometimes a configuration option offered to end users. Even when setuid is used, other factors (such as C library configuration) may block exploitability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-20795"
    },
    {
      "cve": "CVE-2019-20907",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Lib/tarfile.py in Python through 3.8.3, an attacker is able to craft a TAR archive leading to an infinite loop when opened by tarfile.open, because _proc_pax lacks header validation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-20907"
    },
    {
      "cve": "CVE-2019-25013",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The iconv feature in the GNU C Library (aka glibc or libc6) through 2.32, when processing invalid multi-byte input sequences in the EUC-KR encoding, may have a buffer over-read.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-25013"
    },
    {
      "cve": "CVE-2019-1010022",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "** DISPUTED ** GNU Libc current is affected by: Mitigation bypass. The impact is: Attacker may bypass stack guard protection. The component is: nptl. The attack vector is: Exploit stack buffer overflow vulnerability and use this bypass vulnerability to bypass stack guard. NOTE: Upstream comments indicate \"this is being treated as a non-security bug and no real threat.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-1010022"
    },
    {
      "cve": "CVE-2019-1010023",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "** DISPUTED ** GNU Libc current is affected by: Re-mapping current loaded library with malicious ELF file. The impact is: In worst case attacker may evaluate privileges. The component is: libld. The attack vector is: Attacker sends 2 ELF files to victim and asks to run ldd on it. ldd execute code. NOTE: Upstream comments indicate \"this is being treated as a non-security bug and no real threat.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-1010023"
    },
    {
      "cve": "CVE-2019-1010024",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "** DISPUTED ** GNU Libc current is affected by: Mitigation bypass. The impact is: Attacker may bypass ASLR using cache of thread stack and heap. The component is: glibc. NOTE: Upstream comments indicate \"this is being treated as a non-security bug and no real threat.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-1010024"
    },
    {
      "cve": "CVE-2019-1010025",
      "cwe": {
        "id": "CWE-330",
        "name": "Use of Insufficiently Random Values"
      },
      "notes": [
        {
          "category": "summary",
          "text": "** DISPUTED ** GNU Libc current is affected by: Mitigation bypass. The impact is: Attacker may guess the heap addresses of pthread_created thread. The component is: glibc. NOTE: the vendor\u0027s position is \"ASLR bypass itself is not a vulnerability.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-1010025"
    },
    {
      "cve": "CVE-2019-1010180",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU gdb All versions is affected by: Buffer Overflow - Out of bound memory access. The impact is: Deny of Service, Memory Disclosure, and Possible Code Execution. The component is: The main gdb module. The attack vector is: Open an ELF for debugging. The fixed version is: Not fixed yet.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-1010180"
    },
    {
      "cve": "CVE-2020-1712",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A heap use-after-free vulnerability was found in systemd before version v245-rc1, where asynchronous Polkit queries are performed while handling dbus messages. A local unprivileged attacker can abuse this flaw to crash systemd services or potentially execute code and elevate their privileges, by sending specially crafted dbus messages.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-1712"
    },
    {
      "cve": "CVE-2020-1751",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds write vulnerability was found in glibc before 2.31 when handling signal trampolines on PowerPC. Specifically, the backtrace function did not properly check the array bounds when storing the frame address, resulting in a denial of service or potential code execution. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-1751"
    },
    {
      "cve": "CVE-2020-1752",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability introduced in glibc upstream version 2.14 was found in the way the tilde expansion was carried out. Directory paths containing an initial tilde followed by a valid username were affected by this issue. A local attacker could exploit this flaw by creating a specially crafted path that, when processed by the glob function, would potentially lead to arbitrary code execution. This was fixed in version 2.32.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-1752"
    },
    {
      "cve": "CVE-2020-6096",
      "cwe": {
        "id": "CWE-195",
        "name": "Signed to Unsigned Conversion Error"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An exploitable signed comparison vulnerability exists in the ARMv7 memcpy() implementation of GNU glibc 2.30.9000. Calling memcpy() (on ARMv7 targets that utilize the GNU glibc implementation) with a negative value for the \u0027num\u0027 parameter results in a signed comparison vulnerability. If an attacker underflows the \u0027num\u0027 parameter to memcpy(), this vulnerability could lead to undefined behavior such as writing to out-of-bounds memory and potentially remote code execution. Furthermore, this memcpy() implementation allows for program execution to continue in scenarios where a segmentation fault or crash should have occurred. The dangers occur in that subsequent execution and iterations of this code will be executed with this corrupted data.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-6096"
    },
    {
      "cve": "CVE-2020-7595",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "xmlStringLenDecodeEntities in parser.c in libxml2 2.9.10 has an infinite loop in a certain end-of-file situation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-7595"
    },
    {
      "cve": "CVE-2020-8169",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The libcurl library versions 7.62.0 to and including  7.70.0 are vulnerable to an information disclosure vulnerability that can lead to a partial password being leaked over the network and to the DNS server(s).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-8169"
    },
    {
      "cve": "CVE-2020-8177",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl 7.20.0 through 7.70.0 is vulnerable to improper restriction of names for files and other resources that can lead too overwriting a local file when the -J flag is used.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-8177"
    },
    {
      "cve": "CVE-2020-8231",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Due to use of a dangling pointer, libcurl 7.29.0 through 7.71.1 can use the wrong connection when sending data.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-8231"
    },
    {
      "cve": "CVE-2020-8284",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A malicious server can use the FTP PASV response to trick curl 7.73.0 and earlier into connecting back to a given IP address and port, and this way potentially make curl extract information about services that are otherwise private and not disclosed, for example doing port scanning and service banner extractions.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-8284"
    },
    {
      "cve": "CVE-2020-8285",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl 7.21.0 to and including 7.73.0 is vulnerable to uncontrolled recursion due to a stack overflow issue in FTP wildcard match parsing.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-8285"
    },
    {
      "cve": "CVE-2020-8286",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The libcurl library versions 7.41.0 to and including  7.73.0 are vulnerable to an improper check for certificate revocation due to insufficient verification of the OCSP response. This vulnerability could allow an attacker to pass a revoked certificate as valid.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-8286"
    },
    {
      "cve": "CVE-2020-8315",
      "cwe": {
        "id": "CWE-427",
        "name": "Uncontrolled Search Path Element"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Python (CPython) 3.6 through 3.6.10, 3.7 through 3.7.6, and 3.8 through 3.8.1, an insecure dependency load upon launch on Windows 7 may result in an attacker\u0027s copy of api-ms-win-core-path-l1-1-0.dll being loaded and used instead of the system\u0027s copy. Windows 8 and later are unaffected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-8315"
    },
    {
      "cve": "CVE-2020-8492",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Python 2.7 through 2.7.17, 3.5 through 3.5.9, 3.6 through 3.6.10, 3.7 through 3.7.6, and 3.8 through 3.8.1 allows an HTTP server to conduct Regular Expression Denial of Service (ReDoS) attacks against a client because of urllib.request.AbstractBasicAuthHandler catastrophic backtracking.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-8492"
    },
    {
      "cve": "CVE-2020-9327",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite 3.31.1, isAuxiliaryVtabOperator allows attackers to trigger a NULL pointer dereference and segmentation fault because of generated column optimizations.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-9327"
    },
    {
      "cve": "CVE-2020-10029",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The GNU C Library (aka glibc or libc6) before 2.32 could overflow an on-stack buffer during range reduction if an input to an 80-bit long double function contains a non-canonical bit pattern, a seen when passing a 0x5d414141414141410000 value to sinl on x86 targets. This is related to sysdeps/ieee754/ldbl-96/e_rem_pio2l.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-10029"
    },
    {
      "cve": "CVE-2020-10531",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in International Components for Unicode (ICU) for C/C++ through 66.1. An integer overflow, leading to a heap-based buffer overflow, exists in the UnicodeString::doAppend() function in common/unistr.cpp.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-10531"
    },
    {
      "cve": "CVE-2020-10543",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Perl before 5.30.3 on 32-bit platforms allows a heap-based buffer overflow because nested regular expression quantifiers have an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.2,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-10543"
    },
    {
      "cve": "CVE-2020-10735",
      "cwe": {
        "id": "CWE-704",
        "name": "Incorrect Type Conversion or Cast"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in python. In algorithms with quadratic time complexity using non-binary bases, when using int(\"text\"), a system could take 50ms to parse an int string with 100,000 digits and 5s for 1,000,000 digits (float, decimal, int.from_bytes(), and int() for binary bases 2, 4, 8, 16, and 32 are not affected). The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-10735"
    },
    {
      "cve": "CVE-2020-10878",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Perl before 5.30.3 has an integer overflow related to mishandling of a \"PL_regkind[OP(n)] == NOTHING\" situation. A crafted regular expression could lead to malformed bytecode with a possibility of instruction injection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.6,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-10878"
    },
    {
      "cve": "CVE-2020-11501",
      "cwe": {
        "id": "CWE-330",
        "name": "Use of Insufficiently Random Values"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GnuTLS 3.6.x before 3.6.13 uses incorrect cryptography for DTLS. The earliest affected version is 3.6.3 (2018-07-16) because of an error in a 2017-10-06 commit. The DTLS client always uses 32 \u0027\\0\u0027 bytes instead of a random value, and thus contributes no randomness to a DTLS negotiation. This breaks the security guarantees of the DTLS protocol.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-11501"
    },
    {
      "cve": "CVE-2020-11655",
      "cwe": {
        "id": "CWE-665",
        "name": "Improper Initialization"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite through 3.31.1 allows attackers to cause a denial of service (segmentation fault) via a malformed window-function query because the AggInfo object\u0027s initialization is mishandled.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-11655"
    },
    {
      "cve": "CVE-2020-11656",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite through 3.31.1, the ALTER TABLE implementation has a use-after-free, as demonstrated by an ORDER BY clause that belongs to a compound SELECT statement.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-11656"
    },
    {
      "cve": "CVE-2020-12062",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The scp client in OpenSSH 8.2 incorrectly sends duplicate responses to the server upon a utimes system call failure, which allows a malicious unprivileged user on the remote server to overwrite arbitrary files in the client\u0027s download directory by creating a crafted subdirectory anywhere on the remote server. The victim must use the command scp -rp to download a file hierarchy containing, anywhere inside, this crafted subdirectory. NOTE: the vendor points out that \"this attack can achieve no more than a hostile peer is already able to achieve within the scp protocol\" and \"utimes does not fail under normal circumstances.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-12062"
    },
    {
      "cve": "CVE-2020-12243",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In filter.c in slapd in OpenLDAP before 2.4.50, LDAP search filters with nested boolean expressions can result in denial of service (daemon crash).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-12243"
    },
    {
      "cve": "CVE-2020-12723",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "regcomp.c in Perl before 5.30.3 allows a buffer overflow via a crafted regular expression because of recursive S_study_chunk calls.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-12723"
    },
    {
      "cve": "CVE-2020-12762",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "json-c through 0.14 has an integer overflow and out-of-bounds write via a large JSON file, as demonstrated by printbuf_memappend.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-12762"
    },
    {
      "cve": "CVE-2020-13434",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite through 3.32.0 has an integer overflow in sqlite3_str_vappendf in printf.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-13434"
    },
    {
      "cve": "CVE-2020-13435",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite through 3.32.0 has a segmentation fault in sqlite3ExprCodeTarget in expr.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-13435"
    },
    {
      "cve": "CVE-2020-13529",
      "cwe": {
        "id": "CWE-290",
        "name": "Authentication Bypass by Spoofing"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An exploitable denial-of-service vulnerability exists in Systemd 245. A specially crafted DHCP FORCERENEW packet can cause a server running the DHCP client to be vulnerable to a DHCP ACK spoofing attack. An attacker can forge a pair of FORCERENEW and DCHP ACK packets to reconfigure the server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:A/AC:H/PR:N/UI:N/S:C/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-13529"
    },
    {
      "cve": "CVE-2020-13630",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ext/fts3/fts3.c in SQLite before 3.32.0 has a use-after-free in fts3EvalNextRow, related to the snippet feature.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-13630"
    },
    {
      "cve": "CVE-2020-13631",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite before 3.32.0 allows a virtual table to be renamed to the name of one of its shadow tables, related to alter.c and build.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-13631"
    },
    {
      "cve": "CVE-2020-13632",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ext/fts3/fts3_snippet.c in SQLite before 3.32.0 has a NULL pointer dereference via a crafted matchinfo() query.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-13632"
    },
    {
      "cve": "CVE-2020-13776",
      "cwe": {
        "id": "CWE-269",
        "name": "Improper Privilege Management"
      },
      "notes": [
        {
          "category": "summary",
          "text": "systemd through v245 mishandles numerical usernames such as ones composed of decimal digits or 0x followed by hex digits, as demonstrated by use of root privileges when privileges of the 0x0 user account were intended. NOTE: this issue exists because of an incomplete fix for CVE-2017-1000082.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-13776"
    },
    {
      "cve": "CVE-2020-13777",
      "cwe": {
        "id": "CWE-327",
        "name": "Use of a Broken or Risky Cryptographic Algorithm"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GnuTLS 3.6.x before 3.6.14 uses incorrect cryptography for encrypting a session ticket (a loss of confidentiality in TLS 1.2, and an authentication bypass in TLS 1.3). The earliest affected version is 3.6.4 (2018-09-24) because of an error in a 2018-09-18 commit. Until the first key rotation, the TLS server always uses wrong data in place of an encryption key derived from an application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-13777"
    },
    {
      "cve": "CVE-2020-13871",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite 3.32.2 has a use-after-free in resetAccumulator in select.c because the parse tree rewrite for window functions is too late.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-13871"
    },
    {
      "cve": "CVE-2020-14145",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The client side in OpenSSH 5.7 through 8.4 has an Observable Discrepancy leading to an information leak in the algorithm negotiation. This allows man-in-the-middle attackers to target initial connection attempts (where no host key for the server has been cached by the client). NOTE: some reports state that 8.5 and 8.6 are also affected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-14145"
    },
    {
      "cve": "CVE-2020-14422",
      "cwe": {
        "id": "CWE-682",
        "name": "Incorrect Calculation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Lib/ipaddress.py in Python through 3.8.3 improperly computes hash values in the IPv4Interface and IPv6Interface classes, which might allow a remote attacker to cause a denial of service if an application is affected by the performance of a dictionary containing IPv4Interface or IPv6Interface objects, and this attacker can cause many dictionary entries to be created. This is fixed in: v3.5.10, v3.5.10rc1; v3.6.12; v3.7.9; v3.8.4, v3.8.4rc1, v3.8.5, v3.8.6, v3.8.6rc1; v3.9.0, v3.9.0b4, v3.9.0b5, v3.9.0rc1, v3.9.0rc2.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-14422"
    },
    {
      "cve": "CVE-2020-15358",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite before 3.32.3, select.c mishandles query-flattener optimization, leading to a multiSelectOrderBy heap overflow because of misuse of transitive properties for constant propagation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-15358"
    },
    {
      "cve": "CVE-2020-15523",
      "cwe": {
        "id": "CWE-427",
        "name": "Uncontrolled Search Path Element"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Python 3.6 through 3.6.10, 3.7 through 3.7.8, 3.8 through 3.8.4rc1, and 3.9 through 3.9.0b4 on Windows, a Trojan horse python3.dll might be used in cases where CPython is embedded in a native application. This occurs because python3X.dll may use an invalid search path for python3.dll loading (after Py_SetPath has been used). NOTE: this issue CANNOT occur when using python.exe from a standard (non-embedded) Python installation on Windows.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-15523"
    },
    {
      "cve": "CVE-2020-15778",
      "cwe": {
        "id": "CWE-78",
        "name": "Improper Neutralization of Special Elements used in an OS Command (\u0027OS Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "scp in OpenSSH through 8.3p1 allows command injection in the scp.c toremote function, as demonstrated by backtick characters in the destination argument. NOTE: the vendor reportedly has stated that they intentionally omit validation of \"anomalous argument transfers\" because that could \"stand a great chance of breaking existing workflows.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-15778"
    },
    {
      "cve": "CVE-2020-15801",
      "cwe": {
        "id": "CWE-426",
        "name": "Untrusted Search Path"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Python 3.8.4, sys.path restrictions specified in a python38._pth file are ignored, allowing code to be loaded from arbitrary locations. The \u003cexecutable-name\u003e._pth file (e.g., the python._pth file) is not affected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-15801"
    },
    {
      "cve": "CVE-2020-19185",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer Overflow vulnerability in one_one_mapping function in progs/dump_entry.c:1373 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-19185"
    },
    {
      "cve": "CVE-2020-19186",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer Overflow vulnerability in _nc_find_entry function in tinfo/comp_hash.c:66 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-19186"
    },
    {
      "cve": "CVE-2020-19187",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer Overflow vulnerability in fmt_entry function in progs/dump_entry.c:1100 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-19187"
    },
    {
      "cve": "CVE-2020-19188",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer Overflow vulnerability in fmt_entry function in progs/dump_entry.c:1116 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-19188"
    },
    {
      "cve": "CVE-2020-19189",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer Overflow vulnerability in postprocess_terminfo function in tinfo/parse_entry.c:997 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-19189"
    },
    {
      "cve": "CVE-2020-19190",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer Overflow vulnerability in _nc_find_entry in tinfo/comp_hash.c:70 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-19190"
    },
    {
      "cve": "CVE-2020-19909",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Integer overflow vulnerability in tool_operate.c in curl 7.65.2 via a large value as the retry delay. NOTE: many parties report that this has no direct security impact on the curl user; however, it may (in theory) cause a denial of service to associated systems or networks if, for example, --retry-delay is misinterpreted as a value much smaller than what was intended. This is not especially plausible because the overflow only happens if the user was trying to specify that curl should wait weeks (or longer) before trying to recover from a transient error.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-19909"
    },
    {
      "cve": "CVE-2020-21047",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The libcpu component which is used by libasm of elfutils version 0.177 (git 47780c9e), suffers from denial-of-service vulnerability caused by application crashes due to out-of-bounds write (CWE-787), off-by-one error (CWE-193) and reachable assertion (CWE-617); to exploit the vulnerability, the attackers need to craft certain ELF files which bypass the missing bound checks.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-21047"
    },
    {
      "cve": "CVE-2020-21913",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "International Components for Unicode (ICU-20850) v66.1 was discovered to contain a use after free bug in the pkg_createWithAssemblyCode function in the file tools/pkgdata/pkgdata.cpp.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-21913"
    },
    {
      "cve": "CVE-2020-22218",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in function _libssh2_packet_add in libssh2 1.10.0 allows attackers to access out of bounds memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-22218"
    },
    {
      "cve": "CVE-2020-24659",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in GnuTLS before 3.6.15. A server can trigger a NULL pointer dereference in a TLS 1.3 client if a no_renegotiation alert is sent with unexpected timing, and then an invalid second handshake occurs. The crash happens in the application\u0027s error handling path, where the gnutls_deinit function is called after detecting a handshake failure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-24659"
    },
    {
      "cve": "CVE-2020-24977",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNOME project libxml2 v2.9.10 has a global buffer over-read vulnerability in xmlEncodeEntitiesInternal at libxml2/entities.c. The issue has been fixed in commit 50f06b3e.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-24977"
    },
    {
      "cve": "CVE-2020-25692",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer dereference was found in OpenLDAP server and was fixed in openldap 2.4.55, during a request for renaming RDNs. An unauthenticated attacker could remotely crash the slapd process by sending a specially crafted request, causing a Denial of Service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-25692"
    },
    {
      "cve": "CVE-2020-25709",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in OpenLDAP. This flaw allows an attacker who can send a malicious packet to be processed by OpenLDAP\u2019s slapd server, to trigger an assertion failure. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-25709"
    },
    {
      "cve": "CVE-2020-25710",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in OpenLDAP in versions before 2.4.56. This flaw allows an attacker who sends a malicious packet processed by OpenLDAP to force a failed assertion in csnNormalize23(). The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-25710"
    },
    {
      "cve": "CVE-2020-26116",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "http.client in Python 3.x before 3.5.10, 3.6.x before 3.6.12, 3.7.x before 3.7.9, and 3.8.x before 3.8.5 allows CRLF injection if the attacker controls the HTTP request method, as demonstrated by inserting CR and LF control characters in the first argument of HTTPConnection.request.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.2,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-26116"
    },
    {
      "cve": "CVE-2020-27618",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The iconv function in the GNU C Library (aka glibc or libc6) 2.32 and earlier, when processing invalid multi-byte input sequences in IBM1364, IBM1371, IBM1388, IBM1390, and IBM1399 encodings, fails to advance the input state, which could lead to an infinite loop in applications, resulting in a denial of service, a different vulnerability from CVE-2016-10228.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-27618"
    },
    {
      "cve": "CVE-2020-28196",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "MIT Kerberos 5 (aka krb5) before 1.17.2 and 1.18.x before 1.18.3 allows unbounded recursion via an ASN.1-encoded Kerberos message because the lib/krb5/asn.1/asn1_encode.c support for BER indefinite lengths lacks a recursion limit.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-28196"
    },
    {
      "cve": "CVE-2020-29361",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in p11-kit 0.21.1 through 0.23.21. Multiple integer overflows have been discovered in the array allocations in the p11-kit library and the p11-kit list command, where overflow checks are missing before calling realloc or calloc.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-29361"
    },
    {
      "cve": "CVE-2020-29362",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in p11-kit 0.21.1 through 0.23.21. A heap-based buffer over-read has been discovered in the RPC protocol used by thep11-kit server/remote commands and the client library. When the remote entity supplies a byte array through a serialized PKCS#11 function call, the receiving entity may allow the reading of up to 4 bytes of memory past the heap allocation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-29362"
    },
    {
      "cve": "CVE-2020-29363",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in p11-kit 0.23.6 through 0.23.21. A heap-based buffer overflow has been discovered in the RPC protocol used by p11-kit server/remote commands and the client library. When the remote entity supplies a serialized byte array in a CK_ATTRIBUTE, the receiving entity may not allocate sufficient length for the buffer to store the deserialized value.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-29363"
    },
    {
      "cve": "CVE-2020-29562",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The iconv function in the GNU C Library (aka glibc or libc6) 2.30 to 2.32, when converting UCS4 text containing an irreversible character, fails an assertion in the code path and aborts the program, potentially resulting in a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.8,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:L/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-29562"
    },
    {
      "cve": "CVE-2020-29573",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "sysdeps/i386/ldbl2mpn.c in the GNU C Library (aka glibc or libc6) before 2.23 on x86 targets has a stack-based buffer overflow if the input to any of the printf family of functions is an 80-bit long double with a non-canonical bit pattern, as seen when passing a \\x00\\x04\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x04 value to sprintf. NOTE: the issue does not affect glibc by default in 2016 or later (i.e., 2.23 or later) because of commits made in 2015 for inlining of C99 math functions through use of GCC built-ins. In other words, the reference to 2.23 is intentional despite the mention of \"Fixed for glibc 2.33\" in the 26649 reference.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-29573"
    },
    {
      "cve": "CVE-2020-35525",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQlite 3.31.1, a potential null pointer derreference was found in the INTERSEC query processing.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-35525"
    },
    {
      "cve": "CVE-2020-35527",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite 3.31.1, there is an out of bounds access problem through ALTER TABLE for views that have a nested FROM clause.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-35527"
    },
    {
      "cve": "CVE-2020-36221",
      "cwe": {
        "id": "CWE-191",
        "name": "Integer Underflow (Wrap or Wraparound)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer underflow was discovered in OpenLDAP before 2.4.57 leading to slapd crashes in the Certificate Exact Assertion processing, resulting in denial of service (schema_init.c serialNumberAndIssuerCheck).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-36221"
    },
    {
      "cve": "CVE-2020-36222",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading to an assertion failure in slapd in the saslAuthzTo validation, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-36222"
    },
    {
      "cve": "CVE-2020-36223",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading to a slapd crash in the Values Return Filter control handling, resulting in denial of service (double free and out-of-bounds read).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-36223"
    },
    {
      "cve": "CVE-2020-36224",
      "cwe": {
        "id": "CWE-763",
        "name": "Release of Invalid Pointer or Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading to an invalid pointer free and slapd crash in the saslAuthzTo processing, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-36224"
    },
    {
      "cve": "CVE-2020-36225",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading to a double free and slapd crash in the saslAuthzTo processing, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-36225"
    },
    {
      "cve": "CVE-2020-36226",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading to a memch-\u003ebv_len miscalculation and slapd crash in the saslAuthzTo processing, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-36226"
    },
    {
      "cve": "CVE-2020-36227",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading to an infinite loop in slapd with the cancel_extop Cancel operation, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-36227"
    },
    {
      "cve": "CVE-2020-36228",
      "cwe": {
        "id": "CWE-191",
        "name": "Integer Underflow (Wrap or Wraparound)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer underflow was discovered in OpenLDAP before 2.4.57 leading to a slapd crash in the Certificate List Exact Assertion processing, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-36228"
    },
    {
      "cve": "CVE-2020-36229",
      "cwe": {
        "id": "CWE-843",
        "name": "Access of Resource Using Incompatible Type (\u0027Type Confusion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in ldap_X509dn2bv in OpenLDAP before 2.4.57 leading to a slapd crash in the X.509 DN parsing in ad_keystring, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-36229"
    },
    {
      "cve": "CVE-2020-36230",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading in an assertion failure in slapd in the X.509 DN parsing in decode.c ber_next_element, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-36230"
    },
    {
      "cve": "CVE-2021-3177",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Python 3.x through 3.9.1 has a buffer overflow in PyCArg_repr in _ctypes/callproc.c, which may lead to remote code execution in certain Python applications that accept floating-point numbers as untrusted input, as demonstrated by a 1e300 argument to c_double.from_param. This occurs because sprintf is used unsafely.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3177"
    },
    {
      "cve": "CVE-2021-3326",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The iconv function in the GNU C Library (aka glibc or libc6) 2.32 and earlier, when processing invalid input sequences in the ISO-2022-JP-3 encoding, fails an assertion in the code path and aborts the program, potentially resulting in a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3326"
    },
    {
      "cve": "CVE-2021-3426",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There\u0027s a flaw in Python 3\u0027s pydoc. A local or adjacent attacker who discovers or is able to convince another local or adjacent user to start a pydoc server could access the server and use it to disclose sensitive information belonging to the other user that they would not normally be able to access. The highest risk of this flaw is to data confidentiality. This flaw affects Python versions before 3.8.9, Python versions before 3.9.3 and Python versions before 3.10.0a7.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3426"
    },
    {
      "cve": "CVE-2021-3516",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There\u0027s a flaw in libxml2\u0027s xmllint in versions before 2.9.11. An attacker who is able to submit a crafted file to be processed by xmllint could trigger a use-after-free. The greatest impact of this flaw is to confidentiality, integrity, and availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3516"
    },
    {
      "cve": "CVE-2021-3517",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a flaw in the xml entity encoding functionality of libxml2 in versions before 2.9.11. An attacker who is able to supply a crafted file to be processed by an application linked with the affected functionality of libxml2 could trigger an out-of-bounds read. The most likely impact of this flaw is to application availability, with some potential impact to confidentiality and integrity if an attacker is able to use memory information to further exploit the application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.6,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3517"
    },
    {
      "cve": "CVE-2021-3518",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There\u0027s a flaw in libxml2 in versions before 2.9.11. An attacker who is able to submit a crafted file to be processed by an application linked with libxml2 could trigger a use-after-free. The greatest impact from this flaw is to confidentiality, integrity, and availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3518"
    },
    {
      "cve": "CVE-2021-3520",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There\u0027s a flaw in lz4. An attacker who submits a crafted file to an application linked with lz4 may be able to trigger an integer overflow, leading to calling of memmove() on a negative size argument, causing an out-of-bounds write and/or a crash. The greatest impact of this flaw is to availability, with some potential impact to confidentiality and integrity as well.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3520"
    },
    {
      "cve": "CVE-2021-3537",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability found in libxml2 in versions before 2.9.11 shows that it did not propagate errors while parsing XML mixed content, causing a NULL dereference. If an untrusted XML document was parsed in recovery mode and post-validated, the flaw could be used to crash the application. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3537"
    },
    {
      "cve": "CVE-2021-3541",
      "cwe": {
        "id": "CWE-776",
        "name": "Improper Restriction of Recursive Entity References in DTDs (\u0027XML Entity Expansion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in libxml2. Exponential entity expansion attack its possible bypassing all existing protection mechanisms and leading to denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3541"
    },
    {
      "cve": "CVE-2021-3580",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the way nettle\u0027s RSA decryption functions handled specially crafted ciphertext. An attacker could use this flaw to provide a manipulated ciphertext leading to application crash and denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3580"
    },
    {
      "cve": "CVE-2021-3733",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There\u0027s a flaw in urllib\u0027s AbstractBasicAuthHandler class. An attacker who controls a malicious HTTP server that an HTTP client (such as web browser) connects to, could trigger a Regular Expression Denial of Service (ReDOS) during an authentication request with a specially crafted payload that is sent by the server to the client. The greatest threat that this flaw poses is to application availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3733"
    },
    {
      "cve": "CVE-2021-3737",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in python. An improperly handled HTTP response in the HTTP client code of python may allow a remote attacker, who controls the HTTP server, to make the client script enter an infinite loop, consuming CPU time. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3737"
    },
    {
      "cve": "CVE-2021-3826",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Heap/stack buffer overflow in the dlang_lname function in d-demangle.c in libiberty allows attackers to potentially cause a denial of service (segmentation fault and crash) via a crafted mangled symbol.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3826"
    },
    {
      "cve": "CVE-2021-3997",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in systemd. An uncontrolled recursion in systemd-tmpfiles may lead to a denial of service at boot time when too many nested directories are created in /tmp.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3997"
    },
    {
      "cve": "CVE-2021-3998",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in glibc. The realpath() function can mistakenly return an unexpected value, potentially leading to information leakage and disclosure of sensitive data.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3998"
    },
    {
      "cve": "CVE-2021-3999",
      "cwe": {
        "id": "CWE-193",
        "name": "Off-by-one Error"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in glibc. An off-by-one buffer overflow and underflow in getcwd() may lead to memory corruption when the size of the buffer is exactly 1. A local attacker who can control the input buffer and size passed to getcwd() in a setuid program could use this flaw to potentially execute arbitrary code and escalate their privileges on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3999"
    },
    {
      "cve": "CVE-2021-4122",
      "cwe": {
        "id": "CWE-345",
        "name": "Insufficient Verification of Data Authenticity"
      },
      "notes": [
        {
          "category": "summary",
          "text": "It was found that a specially crafted LUKS header could trick cryptsetup into disabling encryption during the recovery of the device. An attacker with physical access to the medium, such as a flash disk, could use this flaw to force a user into permanently disabling the encryption layer of that medium.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:P/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-4122"
    },
    {
      "cve": "CVE-2021-4189",
      "cwe": {
        "id": "CWE-252",
        "name": "Unchecked Return Value"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in Python, specifically in the FTP (File Transfer Protocol) client library in PASV (passive) mode. The issue is how the FTP client trusts the host from the PASV response by default. This flaw allows an attacker to set up a malicious FTP server that can trick FTP clients into connecting back to a given IP address and port. This vulnerability could lead to FTP client scanning ports, which otherwise would not have been possible.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-4189"
    },
    {
      "cve": "CVE-2021-4209",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer dereference flaw was found in GnuTLS. As Nettle\u0027s hash update functions internally call memcpy, providing zero-length input may cause undefined behavior. This flaw leads to a denial of service after authentication in rare circumstances.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-4209"
    },
    {
      "cve": "CVE-2021-20193",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the src/list.c of tar 1.33 and earlier. This flaw allows an attacker who can submit a crafted input file to tar to cause uncontrolled consumption of memory. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-20193"
    },
    {
      "cve": "CVE-2021-20227",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in SQLite\u0027s SELECT query functionality (src/select.c). This flaw allows an attacker who is capable of running SQL queries locally on the SQLite database to cause a denial of service or possible code execution by triggering a use-after-free. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-20227"
    },
    {
      "cve": "CVE-2021-20231",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in gnutls. A use after free issue in client sending key_share extension may lead to memory corruption and other consequences.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-20231"
    },
    {
      "cve": "CVE-2021-20232",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in gnutls. A use after free issue in client_send_params in lib/ext/pre_shared_key.c may lead to memory corruption and other potential consequences.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-20232"
    },
    {
      "cve": "CVE-2021-20305",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in Nettle in versions before 3.7.2, where several Nettle signature verification functions (GOST DSA, EDDSA \u0026 ECDSA) result in the Elliptic Curve Cryptography point (ECC) multiply function being called with out-of-range scalers, possibly resulting in incorrect results. This flaw allows an attacker to force an invalid signature, causing an assertion failure or possible validation. The highest threat to this vulnerability is to confidentiality, integrity, as well as system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-20305"
    },
    {
      "cve": "CVE-2021-22876",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl 7.1.1 to and including 7.75.0 is vulnerable to an \"Exposure of Private Personal Information to an Unauthorized Actor\" by leaking credentials in the HTTP Referer: header. libcurl does not strip off user credentials from the URL when automatically populating the Referer: HTTP request header field in outgoing HTTP requests, and therefore risks leaking sensitive data to the server that is the target of the second HTTP request.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-22876"
    },
    {
      "cve": "CVE-2021-22890",
      "cwe": {
        "id": "CWE-290",
        "name": "Authentication Bypass by Spoofing"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl 7.63.0 to and including 7.75.0 includes vulnerability that allows a malicious HTTPS proxy to MITM a connection due to bad handling of TLS 1.3 session tickets. When using a HTTPS proxy and TLS 1.3, libcurl can confuse session tickets arriving from the HTTPS proxy but work as if they arrived from the remote server and then wrongly \"short-cut\" the host handshake. When confusing the tickets, a HTTPS proxy can trick libcurl to use the wrong session ticket resume for the host and thereby circumvent the server TLS certificate check and make a MITM attack to be possible to perform unnoticed. Note that such a malicious HTTPS proxy needs to provide a certificate that curl will accept for the MITMed server for an attack to work - unless curl has been told to ignore the server certificate check.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-22890"
    },
    {
      "cve": "CVE-2021-22897",
      "cwe": {
        "id": "CWE-668",
        "name": "Exposure of Resource to Wrong Sphere"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl 7.61.0 through 7.76.1 suffers from exposure of data element to wrong session due to a mistake in the code for CURLOPT_SSL_CIPHER_LIST when libcurl is built to use the Schannel TLS library. The selected cipher set was stored in a single \"static\" variable in the library, which has the surprising side-effect that if an application sets up multiple concurrent transfers, the last one that sets the ciphers will accidentally control the set used by all transfers. In a worst-case scenario, this weakens transport security significantly.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-22897"
    },
    {
      "cve": "CVE-2021-22898",
      "cwe": {
        "id": "CWE-909",
        "name": "Missing Initialization of Resource"
      },
      "notes": [
        {
          "category": "summary",
          "text": "**NOTE: CVE-2021-22898 is an incomplete fix (see https://hackerone.com/reports/1223882)! Check if affected products also have fixed CVE-22925 instead! Do not use CVE-2021-22898 in public advisories!**\r\n\r\ncurl 7.7 through 7.76.1 suffers from an information disclosure when the `-t` command line option, known as `CURLOPT_TELNETOPTIONS` in libcurl, is used to send variable=content pairs to TELNET servers. Due to a flaw in the option parser for sending NEW_ENV variables, libcurl could be made to pass on uninitialized data from a stack based buffer to the server, resulting in potentially revealing sensitive internal information to the server using a clear-text network protocol.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.1,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-22898"
    },
    {
      "cve": "CVE-2021-22901",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl 7.75.0 through 7.76.1 suffers from a use-after-free vulnerability resulting in already freed memory being used when a TLS 1.3 session ticket arrives over a connection. A malicious server can use this in rare unfortunate circumstances to potentially reach remote code execution in the client. When libcurl at run-time sets up support for TLS 1.3 session tickets on a connection using OpenSSL, it stores pointers to the transfer in-memory object for later retrieval when a session ticket arrives. If the connection is used by multiple transfers (like with a reused HTTP/1.1 connection or multiplexed HTTP/2 connection) that first transfer object might be freed before the new session is established on that connection and then the function will access a memory buffer that might be freed. When using that memory, libcurl might even call a function pointer in the object, making it possible for a remote code execution if the server could somehow manage to get crafted memory content into the correct place in memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-22901"
    },
    {
      "cve": "CVE-2021-22922",
      "cwe": {
        "id": "CWE-354",
        "name": "Improper Validation of Integrity Check Value"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl is instructed to download content using the metalink feature, thecontents is verified against a hash provided in the metalink XML file.The metalink XML file points out to the client how to get the same contentfrom a set of different URLs, potentially hosted by different servers and theclient can then download the file from one or several of them. In a serial orparallel manner.If one of the servers hosting the contents has been breached and the contentsof the specific file on that server is replaced with a modified payload, curlshould detect this when the hash of the file mismatches after a completeddownload. It should remove the contents and instead try getting the contentsfrom another URL. This is not done, and instead such a hash mismatch is onlymentioned in text and the potentially malicious content is kept in the file ondisk.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-22922"
    },
    {
      "cve": "CVE-2021-22923",
      "cwe": {
        "id": "CWE-522",
        "name": "Insufficiently Protected Credentials"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl is instructed to get content using the metalink feature, and a user name and password are used to download the metalink XML file, those same credentials are then subsequently passed on to each of the servers from which curl will download or try to download the contents from. Often contrary to the user\u0027s expectations and intentions and without telling the user it happened.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-22923"
    },
    {
      "cve": "CVE-2021-22924",
      "cwe": {
        "id": "CWE-706",
        "name": "Use of Incorrectly-Resolved Name or Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl keeps previously used connections in a connection pool for subsequent transfers to reuse, if one of them matches the setup. Due to errors in the logic, the config matching function did not take \u0027issuercert\u0027 into account and it compared the involved paths *case insensitively*, which could lead to libcurl reusing wrong connections. File paths are, or can be, case sensitive on many systems but not all, and can even vary depending on used file systems. The comparison also didn\u0027t include the \u0027issuer cert\u0027 which a transfer can set to qualify how to verify the server certificate.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-22924"
    },
    {
      "cve": "CVE-2021-22925",
      "cwe": {
        "id": "CWE-908",
        "name": "Use of Uninitialized Resource"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl supports the `-t` command line option, known as `CURLOPT_TELNETOPTIONS` in libcurl. This rarely used option is used to send variable=content pairs to TELNET servers. Due to flaw in the option parser for sending `NEW_ENV` variables, libcurl could be made to pass on uninitialized data from a stack based buffer to the server. Therefore potentially revealing sensitive internal information to the server using a clear-text network protocol. This could happen because curl did not call and use sscanf() correctly when parsing the string provided by the application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-22925"
    },
    {
      "cve": "CVE-2021-22926",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl-using applications can ask for a specific client certificate to be used in a transfer. This is done with the `CURLOPT_SSLCERT` option (`--cert` with the command line tool).When libcurl is built to use the macOS native TLS library Secure Transport, an application can ask for the client certificate by name or with a file name - using the same option. If the name exists as a file, it will be used instead of by name.If the appliction runs with a current working directory that is writable by other users (like `/tmp`), a malicious user can create a file name with the same name as the app wants to use by name, and thereby trick the application to use the file based cert instead of the one referred to by name making libcurl send the wrong client certificate in the TLS connection handshake.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-22926"
    },
    {
      "cve": "CVE-2021-22945",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When sending data to an MQTT server, libcurl \u003c= 7.73.0 and 7.78.0 could in some circumstances erroneously keep a pointer to an already freed memory area and both use that again in a subsequent call to send data and also free it *again*.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-22945"
    },
    {
      "cve": "CVE-2021-22946",
      "cwe": {
        "id": "CWE-319",
        "name": "Cleartext Transmission of Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A user can tell curl \u003e= 7.20.0 and \u003c= 7.78.0 to require a successful upgrade to TLS when speaking to an IMAP, POP3 or FTP server (`--ssl-reqd` on the command line or`CURLOPT_USE_SSL` set to `CURLUSESSL_CONTROL` or `CURLUSESSL_ALL` withlibcurl). This requirement could be bypassed if the server would return a properly crafted but perfectly legitimate response.This flaw would then make curl silently continue its operations **withoutTLS** contrary to the instructions and expectations, exposing possibly sensitive data in clear text over the network.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-22946"
    },
    {
      "cve": "CVE-2021-22947",
      "cwe": {
        "id": "CWE-345",
        "name": "Insufficient Verification of Data Authenticity"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl \u003e= 7.20.0 and \u003c= 7.78.0 connects to an IMAP or POP3 server to retrieve data using STARTTLS to upgrade to TLS security, the server can respond and send back multiple responses at once that curl caches. curl would then upgrade to TLS but not flush the in-queue of cached responses but instead continue using and trustingthe responses it got *before* the TLS handshake as if they were authenticated.Using this flaw, it allows a Man-In-The-Middle attacker to first inject the fake responses, then pass-through the TLS traffic from the legitimate server and trick curl into sending data back to the user thinking the attacker\u0027s injected data comes from the TLS-protected server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-22947"
    },
    {
      "cve": "CVE-2021-23336",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The package python/cpython from 0 and before 3.6.13, from 3.7.0 and before 3.7.10, from 3.8.0 and before 3.8.8, from 3.9.0 and before 3.9.2 are vulnerable to Web Cache Poisoning via urllib.parse.parse_qsl and urllib.parse.parse_qs by using a vector called parameter cloaking. When the attacker can separate query parameters using a semicolon (;), they can cause a difference in the interpretation of the request between the proxy (running with default configuration) and the server. This can result in malicious requests being cached as completely safe ones, as the proxy would usually not see the semicolon as a separator, and therefore would not include it in a cache key of an unkeyed parameter.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:N/I:L/A:H/E:P/RL:U/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-23336"
    },
    {
      "cve": "CVE-2021-27212",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In OpenLDAP through 2.4.57 and 2.5.x through 2.5.1alpha, an assertion failure in slapd can occur in the issuerAndThisUpdateCheck function via a crafted packet, resulting in a denial of service (daemon exit) via a short timestamp. This is related to schema_init.c and checkTime.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-27212"
    },
    {
      "cve": "CVE-2021-27218",
      "cwe": {
        "id": "CWE-681",
        "name": "Incorrect Conversion between Numeric Types"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in GNOME GLib before 2.66.7 and 2.67.x before 2.67.4. If g_byte_array_new_take() was called with a buffer of 4GB or more on a 64-bit platform, the length would be truncated modulo 2**32, causing unintended length truncation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-27218"
    },
    {
      "cve": "CVE-2021-27219",
      "cwe": {
        "id": "CWE-681",
        "name": "Incorrect Conversion between Numeric Types"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in GNOME GLib before 2.66.6 and 2.67.x before 2.67.3. The function g_bytes_new has an integer overflow on 64-bit platforms due to an implicit cast from 64 bits to 32 bits. The overflow could potentially lead to memory corruption.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-27219"
    },
    {
      "cve": "CVE-2021-27645",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The nameserver caching daemon (nscd) in the GNU C Library (aka glibc or libc6) 2.29 through 2.33, when processing a request for netgroup lookup, may crash due to a double-free, potentially resulting in degraded service or Denial of Service on the local system. This is related to netgroupcache.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 2.5,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-27645"
    },
    {
      "cve": "CVE-2021-28041",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ssh-agent in OpenSSH before 8.5 has a double free that may be relevant in a few less-common scenarios, such as unconstrained agent-socket access on a legacy operating system, or the forwarding of an agent to an attacker-controlled host.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:L/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-28041"
    },
    {
      "cve": "CVE-2021-28153",
      "cwe": {
        "id": "CWE-59",
        "name": "Improper Link Resolution Before File Access (\u0027Link Following\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in GNOME GLib before 2.66.8. When g_file_replace() is used with G_FILE_CREATE_REPLACE_DESTINATION to replace a path that is a dangling symlink, it incorrectly also creates the target of the symlink as an empty file, which could conceivably have security relevance if the symlink is attacker-controlled. (If the path is a symlink to a file that already exists, then the contents of that file correctly remain unchanged.)",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-28153"
    },
    {
      "cve": "CVE-2021-28363",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The urllib3 library 1.26.x before 1.26.4 for Python omits SSL certificate validation in some cases involving HTTPS to HTTPS proxies. The initial connection to the HTTPS proxy (if an SSLContext isn\u0027t given via proxy_config) doesn\u0027t verify the hostname of the certificate. This means certificates for different servers that still validate properly with the default urllib3 SSLContext will be silently accepted.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-28363"
    },
    {
      "cve": "CVE-2021-28861",
      "cwe": {
        "id": "CWE-601",
        "name": "URL Redirection to Untrusted Site (\u0027Open Redirect\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Python 3.x through 3.10 has an open redirection vulnerability in lib/http/server.py due to no protection against multiple (/) at the beginning of URI path which may leads to information disclosure. NOTE: this is disputed by a third party because the http.server.html documentation page states \"Warning: http.server is not recommended for production. It only implements basic security checks.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-28861"
    },
    {
      "cve": "CVE-2021-31239",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue found in SQLite SQLite3 v.3.35.4 that could allow a remote attacker to cause a denial of service via the appendvfs.c function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-31239"
    },
    {
      "cve": "CVE-2021-32292",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in json-c from 20200420 (post 0.14 unreleased code) through 0.15-20200726. A stack-buffer-overflow exists in the auxiliary sample program json_parse which is located in the function parseit.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-32292"
    },
    {
      "cve": "CVE-2021-33294",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In elfutils 0.183, an infinite loop was found in the function handle_symtab in readelf.c .Which allows attackers to cause a denial of service (infinite loop) via crafted file.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-33294"
    },
    {
      "cve": "CVE-2021-33560",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Libgcrypt before 1.8.8 and 1.9.x before 1.9.3 mishandles ElGamal encryption because it lacks exponent blinding to address a side-channel attack against mpi_powm, and the window size is not chosen appropriately. This, for example, affects use of ElGamal in OpenPGP.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-33560"
    },
    {
      "cve": "CVE-2021-33574",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The mq_notify function in the GNU C Library (aka glibc) versions 2.32 and 2.33 has a use-after-free. It may use the notification thread attributes object (passed through its struct sigevent parameter) after it has been freed by the caller, leading to a denial of service (application crash) or possibly unspecified other impact.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-33574"
    },
    {
      "cve": "CVE-2021-33910",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The use of alloca function with an uncontrolled size in function unit_name_path_escape allows a local attacker, able to mount a filesystem on a very long path, to crash systemd and the whole system by allocating a very large space in the stack.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-33910"
    },
    {
      "cve": "CVE-2021-35942",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The wordexp function in the GNU C Library (aka glibc) through 2.33 may crash or read arbitrary memory in parse_param (in posix/wordexp.c) when called with an untrusted, crafted pattern, potentially resulting in a denial of service or disclosure of information. This occurs because atoi was used but strtoul should have been used to ensure correct calculations.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-35942"
    },
    {
      "cve": "CVE-2021-36084",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The CIL compiler in SELinux 3.2 has a use-after-free in __cil_verify_classperms (called from __cil_verify_classpermission and __cil_pre_verify_helper).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-36084"
    },
    {
      "cve": "CVE-2021-36085",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The CIL compiler in SELinux 3.2 has a use-after-free in __cil_verify_classperms (called from __verify_map_perm_classperms and hashtab_map).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-36085"
    },
    {
      "cve": "CVE-2021-36086",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The CIL compiler in SELinux 3.2 has a use-after-free in cil_reset_classpermission (called from cil_reset_classperms_set and cil_reset_classperms_list).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-36086"
    },
    {
      "cve": "CVE-2021-36087",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The CIL compiler in SELinux 3.2 has a heap-based buffer over-read in ebitmap_match_any (called indirectly from cil_check_neverallow). This occurs because there is sometimes a lack of checks for invalid statements in an optional block.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-36087"
    },
    {
      "cve": "CVE-2021-36222",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ec_verify in kdc/kdc_preauth_ec.c in the Key Distribution Center (KDC) in MIT Kerberos 5 (aka krb5) before 1.18.4 and 1.19.x before 1.19.2 allows remote attackers to cause a NULL pointer dereference and daemon crash. This occurs because a return value is not properly managed in a certain situation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-36222"
    },
    {
      "cve": "CVE-2021-36690",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A segmentation fault can occur in the sqlite3.exe command-line component of SQLite 3.36.0 via the idxGetTableInfo function when there is a crafted SQL query. NOTE: the vendor disputes the relevance of this report because a sqlite3.exe user already has full privileges (e.g., is intentionally allowed to execute commands). This report does NOT imply any problem in the SQLite library.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-36690"
    },
    {
      "cve": "CVE-2021-37600",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer overflow in util-linux through 2.37.1 can potentially cause a buffer overflow if an attacker were able to use system resources in a way that leads to a large number in the /proc/sysvipc/sem file. NOTE: this is unexploitable in GNU C Library environments, and possibly in all realistic environments",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-37600"
    },
    {
      "cve": "CVE-2021-37750",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The Key Distribution Center (KDC) in MIT Kerberos 5 (aka krb5) before 1.18.5 and 1.19.x before 1.19.3 has a NULL pointer dereference in kdc/do_tgs_req.c via a FAST inner body that lacks a server field.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-37750"
    },
    {
      "cve": "CVE-2021-38604",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In librt in the GNU C Library (aka glibc) through 2.34, sysdeps/unix/sysv/linux/mq_notify.c mishandles certain NOTIFY_REMOVED data, leading to a NULL pointer dereference. NOTE: this vulnerability was introduced as a side effect of the CVE-2021-33574 fix.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-38604"
    },
    {
      "cve": "CVE-2021-41617",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "sshd in OpenSSH 6.2 through 8.x before 8.8, when certain non-default configurations are used, allows privilege escalation because supplemental groups are not initialized as expected. Helper programs for AuthorizedKeysCommand and AuthorizedPrincipalsCommand may run with privileges associated with group memberships of the sshd process, if the configuration specifies running the command as a different user.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-41617"
    },
    {
      "cve": "CVE-2021-43396",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "** DISPUTED ** In iconvdata/iso-2022-jp-3.c in the GNU C Library (aka glibc) 2.34, remote attackers can force iconv() to emit a spurious \u0027\\0\u0027 character via crafted ISO-2022-JP-3 data that is accompanied by an internal state reset. This may affect data integrity in certain iconv() use cases. NOTE: the vendor states \"the bug cannot be invoked through user input and requires iconv to be invoked with a NULL inbuf, which ought to require a separate application bug to do so unintentionally. Hence there\u0027s no security impact to the bug.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-43396"
    },
    {
      "cve": "CVE-2021-43618",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU Multiple Precision Arithmetic Library (GMP) through 6.2.1 has an mpz/inp_raw.c integer overflow and resultant buffer overflow via crafted input, leading to a segmentation fault on 32-bit platforms.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-43618"
    },
    {
      "cve": "CVE-2021-44879",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In gc_data_segment in fs/f2fs/gc.c in the Linux kernel before 5.16.3, special files are not considered, leading to a move_data_page NULL pointer dereference.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-44879"
    },
    {
      "cve": "CVE-2021-45960",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Expat (aka libexpat) before 2.4.3, a left shift by 29 (or more) places in the storeAtts function in xmlparse.c can lead to realloc misbehavior (e.g., allocating too few bytes, or only freeing memory).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-45960"
    },
    {
      "cve": "CVE-2021-46143",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In doProlog in xmlparse.c in Expat (aka libexpat) before 2.4.3, an integer overflow exists for m_groupSize.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-46143"
    },
    {
      "cve": "CVE-2021-46195",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GCC v12.0 was discovered to contain an uncontrolled recursion via the component libiberty/rust-demangle.c. This vulnerability allows attackers to cause a Denial of Service (DoS) by consuming excessive CPU and memory resources.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-46195"
    },
    {
      "cve": "CVE-2021-46828",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libtirpc before 1.3.3rc1, remote attackers could exhaust the file descriptors of a process that uses libtirpc because idle TCP connections are mishandled. This can, in turn, lead to an svc_run infinite loop without accepting new connections.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-46828"
    },
    {
      "cve": "CVE-2021-46848",
      "cwe": {
        "id": "CWE-193",
        "name": "Off-by-one Error"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU Libtasn1 before 4.19.0 has an ETYPE_OK off-by-one array size check that affects asn1_encode_simple_der.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-46848"
    },
    {
      "cve": "CVE-2022-0391",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in Python, specifically within the urllib.parse module. This module helps break Uniform Resource Locator (URL) strings into components. The issue involves how the urlparse method does not sanitize input and allows characters like \u0027\\r\u0027 and \u0027\\n\u0027 in the URL path. This flaw allows an attacker to input a crafted URL, leading to injection attacks. This flaw affects Python versions prior to 3.10.0b1, 3.9.5, 3.8.11, 3.7.11 and 3.6.14.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-0391"
    },
    {
      "cve": "CVE-2022-0563",
      "cwe": {
        "id": "CWE-209",
        "name": "Generation of Error Message Containing Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the util-linux chfn and chsh utilities when compiled with Readline support. The Readline library uses an \"INPUTRC\" environment variable to get a path to the library config file. When the library cannot parse the specified file, it prints an error message containing data from the file. This flaw allows an unprivileged user to read root-owned files, potentially leading to privilege escalation. This flaw affects util-linux versions prior to 2.37.4.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-0563"
    },
    {
      "cve": "CVE-2022-0778",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The BN_mod_sqrt() function in openSSL, which computes a modular square root, contains a bug that can cause it to loop forever for non-prime moduli. Internally this function is used when parsing certificates that contain elliptic curve public keys in compressed form or explicit elliptic curve parameters with a base point encoded in compressed form. It is possible to trigger the infinite loop by crafting a certificate that has invalid explicit curve parameters. Since certificate parsing happens prior to verification of the certificate signature, any process that parses an externally supplied certificate may thus be subject to a denial of service attack. The infinite loop can also be reached when parsing crafted private keys as they can contain explicit elliptic curve parameters.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-0778"
    },
    {
      "cve": "CVE-2022-1271",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An arbitrary file write vulnerability was found in GNU gzip\u0027s zgrep utility. When zgrep is applied on the attacker\u0027s chosen file name (for example, a crafted file name), this can overwrite an attacker\u0027s content to an arbitrary attacker-selected file. This flaw occurs due to insufficient validation when processing filenames with two or more newlines where selected content and the target file names are embedded in crafted multi-line file names. This flaw allows a remote, low privileged attacker to force zgrep to write arbitrary files on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-1271"
    },
    {
      "cve": "CVE-2022-1292",
      "cwe": {
        "id": "CWE-78",
        "name": "Improper Neutralization of Special Elements used in an OS Command (\u0027OS Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The c_rehash script does not properly sanitise shell metacharacters to prevent command injection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-1292"
    },
    {
      "cve": "CVE-2022-1304",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds read/write vulnerability was found in e2fsprogs 1.46.5. This issue leads to a segmentation fault and possibly arbitrary code execution via a specially crafted filesystem.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-1304"
    },
    {
      "cve": "CVE-2022-1343",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Under certain circumstances, the command line OCSP verify function reports successful verification when the verification in fact failed. In this case the incorrect successful response will also be accompanied by error messages showing the failure and contradicting the apparently successful result.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-1343"
    },
    {
      "cve": "CVE-2022-1434",
      "cwe": {
        "id": "CWE-327",
        "name": "Use of a Broken or Risky Cryptographic Algorithm"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When using the RC4-MD5 ciphersuite, which is disabled by default, an attacker is able to modify data in transit due to an incorrect use of the AAD data as the MAC key in OpenSSL 3.0. An attacker is not able to decrypt any communication.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-1434"
    },
    {
      "cve": "CVE-2022-1473",
      "cwe": {
        "id": "CWE-404",
        "name": "Improper Resource Shutdown or Release"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The used OpenSSL version improperly reuses memory when decoding certificates or keys. This can lead to a process termination and Denial of Service for long lived processes.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-1473"
    },
    {
      "cve": "CVE-2022-2068",
      "cwe": {
        "id": "CWE-78",
        "name": "Improper Neutralization of Special Elements used in an OS Command (\u0027OS Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In addition to the c_rehash shell command injection identified in CVE-2022-1292, further circumstances where the c_rehash script does not properly sanitise shell metacharacters to prevent command injection were found by code review. When the CVE-2022-1292 was fixed it was not discovered that there are other places in the script where the file names of certificates being hashed were possibly passed to a command executed through the shell. This script is distributed by some operating systems in a manner where it is automatically executed. On such operating systems, an attacker could execute arbitrary commands with the privileges of the script. Use of the c_rehash script is considered obsolete and should be replaced by the OpenSSL rehash command line tool.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-2068"
    },
    {
      "cve": "CVE-2022-2097",
      "cwe": {
        "id": "CWE-326",
        "name": "Inadequate Encryption Strength"
      },
      "notes": [
        {
          "category": "summary",
          "text": "AES OCB mode for 32-bit x86 platforms using the AES-NI assembly optimised implementation will not encrypt the entirety of the data under some circumstances. This could reveal sixteen bytes of data that was preexisting in the memory that wasn\u0027t written. In the special case of \"in place\" encryption, sixteen bytes of the plaintext would be revealed. Since OpenSSL does not support OCB based cipher suites for TLS and DTLS, they are both unaffected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-2097"
    },
    {
      "cve": "CVE-2022-2274",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The OpenSSL 3.0.4 release introduced a serious bug in the RSA implementation for X86_64 CPUs supporting the AVX512IFMA instructions. This issue makes the RSA implementation with 2048 bit private keys incorrect on such machines and memory corruption will happen during the computation. As a consequence of the memory corruption an attacker may be able to trigger a remote code execution on the machine performing the computation. SSL/TLS servers or other servers using 2048 bit RSA private keys running on machines supporting AVX512IFMA instructions of the X86_64 architecture are affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-2274"
    },
    {
      "cve": "CVE-2022-2509",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability found in gnutls. This security flaw happens because of a double free error occurs during verification of pkcs7 signatures in gnutls_pkcs7_verify function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-2509"
    },
    {
      "cve": "CVE-2022-3715",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the bash package, where a heap-buffer overflow can occur in valid parameter_transform. This issue may lead to memory problems.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-3715"
    },
    {
      "cve": "CVE-2022-3821",
      "cwe": {
        "id": "CWE-193",
        "name": "Off-by-one Error"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An off-by-one Error issue was discovered in Systemd in format_timespan() function of time-util.c. An attacker could supply specific values for time and accuracy that leads to buffer overrun in format_timespan(), leading to a Denial of Service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-3821"
    },
    {
      "cve": "CVE-2022-4304",
      "cwe": {
        "id": "CWE-326",
        "name": "Inadequate Encryption Strength"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A timing based side channel exists in the OpenSSL RSA Decryption implementation which could be sufficient to recover a plaintext across a network in a Bleichenbacher style attack. To achieve a successful decryption an attacker would have to be able to send a very large number of trial messages for decryption. The vulnerability affects all RSA padding modes: PKCS#1 v1.5, RSA-OEAP and RSASVE. For example, in a TLS connection, RSA is commonly used by a client to send an encrypted pre-master secret to the server. An attacker that had observed a genuine connection between a client and a server could use this flaw to send trial messages to the server and record the time taken to process them. After a sufficiently large number of messages the attacker could recover the pre-master secret used for the original connection and thus be able to decrypt the application data sent over that connection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Disable the use of RSA ciphers in the web server configuration; note that RSA ciphers are disabled by default",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-4304"
    },
    {
      "cve": "CVE-2022-4450",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The function PEM_read_bio_ex() reads a PEM file from a BIO and parses and decodes the \"name\" (e.g. \"CERTIFICATE\"), any header data and the payload data. If the function succeeds then the \"name_out\", \"header\" and \"data\" arguments are populated with pointers to buffers containing the relevant decoded data. The caller is responsible for freeing those buffers. It is possible to construct a PEM file that results in 0 bytes of payload data. In this case PEM_read_bio_ex() will return a failure code but will populate the header argument with a pointer to a buffer that has already been freed. If the caller also frees this buffer then a double free will occur. This will most likely lead to a crash. This could be exploited by an attacker who has the ability to supply malicious PEM files for parsing to achieve a denial of service attack. The functions PEM_read_bio() and PEM_read() are simple wrappers around PEM_read_bio_ex() and therefore these functions are also directly affected. These functions are also called indirectly by a number of other OpenSSL functions including PEM_X509_INFO_read_bio_ex() and SSL_CTX_use_serverinfo_file() which are also vulnerable. Some OpenSSL internal uses of these functions are not vulnerable because the caller does not free the header argument if PEM_read_bio_ex() returns a failure code. These locations include the PEM_read_bio_TYPE() functions as well as the decoders introduced in OpenSSL 3.0. The OpenSSL asn1parse command line application is also impacted by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Do not import or configure certificate files in PEM format from untrusted sources",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-4450"
    },
    {
      "cve": "CVE-2022-22576",
      "cwe": {
        "id": "CWE-287",
        "name": "Improper Authentication"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S), IMAP(S), POP3(S) and LDAP(S) (openldap only).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-22576"
    },
    {
      "cve": "CVE-2022-22822",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "addBinding in xmlparse.c in Expat (aka libexpat) before 2.4.3 has an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-22822"
    },
    {
      "cve": "CVE-2022-22823",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "build_model in xmlparse.c in Expat (aka libexpat) before 2.4.3 has an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-22823"
    },
    {
      "cve": "CVE-2022-22824",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "defineAttribute in xmlparse.c in Expat (aka libexpat) before 2.4.3 has an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-22824"
    },
    {
      "cve": "CVE-2022-22825",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "lookup in xmlparse.c in Expat (aka libexpat) before 2.4.3 has an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-22825"
    },
    {
      "cve": "CVE-2022-22826",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nextScaffoldPart in xmlparse.c in Expat (aka libexpat) before 2.4.3 has an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-22826"
    },
    {
      "cve": "CVE-2022-22827",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "storeAtts in xmlparse.c in Expat (aka libexpat) before 2.4.3 has an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-22827"
    },
    {
      "cve": "CVE-2022-23218",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The deprecated compatibility function svcunix_create in the sunrpc module of the GNU C Library (aka glibc) through 2.34 copies its path argument on the stack without validating its length, which may result in a buffer overflow, potentially resulting in a denial of service or (if an application is not built with a stack protector enabled) arbitrary code execution.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-23218"
    },
    {
      "cve": "CVE-2022-23219",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The deprecated compatibility function clnt_create in the sunrpc module of the GNU C Library (aka glibc) through 2.34 copies its hostname argument on the stack without validating its length, which may result in a buffer overflow, potentially resulting in a denial of service or (if an application is not built with a stack protector enabled) arbitrary code execution.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-23219"
    },
    {
      "cve": "CVE-2022-23308",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "valid.c in libxml2 before 2.9.13 has a use-after-free of ID and IDREF attributes.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-23308"
    },
    {
      "cve": "CVE-2022-23852",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Expat (aka libexpat) before 2.4.4 has a signed integer overflow in XML_GetBuffer, for configurations with a nonzero XML_CONTEXT_BYTES.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-23852"
    },
    {
      "cve": "CVE-2022-23990",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Expat (aka libexpat) before 2.4.4 has an integer overflow in the doProlog function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-23990"
    },
    {
      "cve": "CVE-2022-24407",
      "cwe": {
        "id": "CWE-89",
        "name": "Improper Neutralization of Special Elements used in an SQL Command (\u0027SQL Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Cyrus SASL 2.1.17 through 2.1.27 before 2.1.28, plugins/sql.c does not escape the password for a SQL INSERT or UPDATE statement.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-24407"
    },
    {
      "cve": "CVE-2022-25235",
      "cwe": {
        "id": "CWE-116",
        "name": "Improper Encoding or Escaping of Output"
      },
      "notes": [
        {
          "category": "summary",
          "text": "xmltok_impl.c in Expat (aka libexpat) before 2.4.5 lacks certain validation of encoding, such as checks for whether a UTF-8 character is valid in a certain context.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-25235"
    },
    {
      "cve": "CVE-2022-25236",
      "cwe": {
        "id": "CWE-668",
        "name": "Exposure of Resource to Wrong Sphere"
      },
      "notes": [
        {
          "category": "summary",
          "text": "xmlparse.c in Expat (aka libexpat) before 2.4.5 allows attackers to insert namespace-separator characters into namespace URIs.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-25236"
    },
    {
      "cve": "CVE-2022-25313",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Expat (aka libexpat) before 2.4.5, an attacker can trigger stack exhaustion in build_model via a large nesting depth in the DTD element.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-25313"
    },
    {
      "cve": "CVE-2022-25314",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Expat (aka libexpat) before 2.4.5, there is an integer overflow in copyString.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-25314"
    },
    {
      "cve": "CVE-2022-25315",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Expat (aka libexpat) before 2.4.5, there is an integer overflow in storeRawNames.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-25315"
    },
    {
      "cve": "CVE-2022-26488",
      "cwe": {
        "id": "CWE-426",
        "name": "Untrusted Search Path"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Python before 3.10.3 on Windows, local users can gain privileges because the search path is inadequately secured. The installer may allow a local attacker to add user-writable directories to the system search path. To exploit, an administrator must have installed Python for all users and enabled PATH entries. A non-administrative user can trigger a repair that incorrectly adds user-writable paths into PATH, enabling search-path hijacking of other users and system services. This affects Python (CPython) through 3.7.12, 3.8.x through 3.8.12, 3.9.x through 3.9.10, and 3.10.x through 3.10.2.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-26488"
    },
    {
      "cve": "CVE-2022-27774",
      "cwe": {
        "id": "CWE-522",
        "name": "Insufficiently Protected Credentials"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with authentication could leak credentials to other services that exist on different protocols or port numbers.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:R/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-27774"
    },
    {
      "cve": "CVE-2022-27775",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An information disclosure vulnerability exists in curl 7.65.0 to 7.82.0 are vulnerable that by using an IPv6 address that was in the connection pool but with a different zone id it could reuse a connection instead.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-27775"
    },
    {
      "cve": "CVE-2022-27776",
      "cwe": {
        "id": "CWE-522",
        "name": "Insufficiently Protected Credentials"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or cookie header data on HTTP redirects to the same host but another port number.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-27776"
    },
    {
      "cve": "CVE-2022-27778",
      "cwe": {
        "id": "CWE-706",
        "name": "Use of Incorrectly-Resolved Name or Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use of incorrectly resolved name vulnerability fixed in 7.83.1 might remove the wrong file when `--no-clobber` is used together with `--remove-on-error`.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-27778"
    },
    {
      "cve": "CVE-2022-27779",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl wrongly allows cookies to be set for Top Level Domains (TLDs) if thehost name is provided with a trailing dot.curl can be told to receive and send cookies. curl\u0027s \"cookie engine\" can bebuilt with or without [Public Suffix List](https://publicsuffix.org/)awareness. If PSL support not provided, a more rudimentary check exists to atleast prevent cookies from being set on TLDs. This check was broken if thehost name in the URL uses a trailing dot.This can allow arbitrary sites to set cookies that then would get sent to adifferent and unrelated site or domain.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-27779"
    },
    {
      "cve": "CVE-2022-27780",
      "cwe": {
        "id": "CWE-918",
        "name": "Server-Side Request Forgery (SSRF)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The curl URL parser wrongly accepts percent-encoded URL separators like \u0027/\u0027when decoding the host name part of a URL, making it a *different* URL usingthe wrong host name when it is later retrieved.For example, a URL like `http://example.com%2F127.0.0.1/`, would be allowed bythe parser and get transposed into `http://example.com/127.0.0.1/`. This flawcan be used to circumvent filters, checks and more.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-27780"
    },
    {
      "cve": "CVE-2022-27781",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl provides the `CURLOPT_CERTINFO` option to allow applications torequest details to be returned about a server\u0027s certificate chain.Due to an erroneous function, a malicious server could make libcurl built withNSS get stuck in a never-ending busy-loop when trying to retrieve thatinformation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-27781"
    },
    {
      "cve": "CVE-2022-27782",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl would reuse a previously created connection even when a TLS or SSHrelated option had been changed that should have prohibited reuse.libcurl keeps previously used connections in a connection pool for subsequenttransfers to reuse if one of them matches the setup. However, several TLS andSSH settings were left out from the configuration match checks, making themmatch too easily.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-27782"
    },
    {
      "cve": "CVE-2022-27943",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libiberty/rust-demangle.c in GNU GCC 11.2 allows stack consumption in demangle_const, as demonstrated by nm-new.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-27943"
    },
    {
      "cve": "CVE-2022-28321",
      "cwe": {
        "id": "CWE-287",
        "name": "Improper Authentication"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The Linux-PAM package before 1.5.2-6.1 for openSUSE Tumbleweed allows authentication bypass for SSH logins. The pam_access.so module doesn\u0027t correctly restrict login if a user tries to connect from an IP address that is not resolvable via DNS. In such conditions, a user with denied access to a machine can still get access. NOTE: the relevance of this issue is largely limited to openSUSE Tumbleweed and openSUSE Factory; it does not affect Linux-PAM upstream.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-28321"
    },
    {
      "cve": "CVE-2022-29155",
      "cwe": {
        "id": "CWE-89",
        "name": "Improper Neutralization of Special Elements used in an SQL Command (\u0027SQL Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In OpenLDAP 2.x before 2.5.12 and 2.6.x before 2.6.2, a SQL injection vulnerability exists in the experimental back-sql backend to slapd, via a SQL statement within an LDAP query. This can occur during an LDAP search operation when the search filter is processed, due to a lack of proper escaping.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-29155"
    },
    {
      "cve": "CVE-2022-29824",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libxml2 before 2.9.14, several buffer handling functions in buf.c (xmlBuf*) and tree.c (xmlBuffer*) don\u0027t check for integer overflows. This can result in out-of-bounds memory writes. Exploitation requires a victim to open a crafted, multi-gigabyte XML file. Other software using libxml2\u0027s buffer functions, for example libxslt through 1.1.35, is affected as well.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-29824"
    },
    {
      "cve": "CVE-2022-30115",
      "cwe": {
        "id": "CWE-319",
        "name": "Cleartext Transmission of Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Using its HSTS support, curl can be instructed to use HTTPS directly insteadof using an insecure clear-text HTTP step even when HTTP is provided in theURL. This mechanism could be bypassed if the host name in the given URL used atrailing dot while not using one when it built the HSTS cache. Or the otherway around - by having the trailing dot in the HSTS cache and *not* using thetrailing dot in the URL.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-30115"
    },
    {
      "cve": "CVE-2022-32205",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A malicious server can serve excessive amounts of \"Set-Cookie:\" headers in a HTTP response to curl and curl \u003c 7.84.0 stores all of them. A sufficiently large amount of (big) cookies make subsequent HTTP requests to this, or other servers to which the cookies match, create requests that become larger than the threshold that curl uses internally to avoid sending crazy large requests (1048576 bytes) and instead returns an error.This denial state might remain for as long as the same cookies are kept, match and haven\u0027t expired. Due to cookie matching rules, a server on \"foo.example.com\" can set cookies that also would match for \"bar.example.com\", making it it possible for a \"sister server\" to effectively cause a denial of service for a sibling site on the same second level domain using this method.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-32205"
    },
    {
      "cve": "CVE-2022-32206",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl \u003c 7.84.0 supports \"chained\" HTTP compression algorithms, meaning that a serverresponse can be compressed multiple times and potentially with different algorithms. The number of acceptable \"links\" in this \"decompression chain\" was unbounded, allowing a malicious server to insert a virtually unlimited number of compression steps.The use of such a decompression chain could result in a \"malloc bomb\", makingcurl end up spending enormous amounts of allocated heap memory, or trying toand returning out of memory errors.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-32206"
    },
    {
      "cve": "CVE-2022-32207",
      "cwe": {
        "id": "CWE-276",
        "name": "Incorrect Default Permissions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl \u003c 7.84.0 saves cookies, alt-svc and hsts data to local files, it makes the operation atomic by finalizing the operation with a rename from a temporary name to the final target file name.In that rename operation, it might accidentally *widen* the permissions for the target file, leaving the updated file accessible to more users than intended.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-32207"
    },
    {
      "cve": "CVE-2022-32208",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl \u003c 7.84.0 does FTP transfers secured by krb5, it handles message verification failures wrongly. This flaw makes it possible for a Man-In-The-Middle attack to go unnoticed and even allows it to inject data to the client.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-32208"
    },
    {
      "cve": "CVE-2022-32221",
      "cwe": {
        "id": "CWE-440",
        "name": "Expected Behavior Violation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When doing HTTP(S) transfers, libcurl might erroneously use the read callback (`CURLOPT_READFUNCTION`) to ask for data to send, even when the `CURLOPT_POSTFIELDS` option has been set, if the same handle previously was used to issue a `PUT` request which used that callback. This flaw may surprise the application and cause it to misbehave and either send off the wrong data or use memory after free or similar in the subsequent `POST` request. The problem exists in the logic for a reused handle when it is changed from a PUT to a POST.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.2,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-32221"
    },
    {
      "cve": "CVE-2022-35252",
      "cwe": {
        "id": "CWE-1286",
        "name": "Improper Validation of Syntactic Correctness of Input"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl is used to retrieve and parse cookies from a HTTP(S) server, itaccepts cookies using control codes that when later are sent back to a HTTPserver might make the server return 400 responses. Effectively allowing a\"sister site\" to deny service to all siblings.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-35252"
    },
    {
      "cve": "CVE-2022-35260",
      "cwe": {
        "id": "CWE-121",
        "name": "Stack-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl can be told to parse a `.netrc` file for credentials. If that file endsin a line with 4095 consecutive non-white space letters and no newline, curlwould first read past the end of the stack-based buffer, and if the readworks, write a zero byte beyond its boundary.This will in most cases cause a segfault or similar, but circumstances might also cause different outcomes.If a malicious user can provide a custom netrc file to an application or otherwise affect its contents, this flaw could be used as denial-of-service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.6,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-35260"
    },
    {
      "cve": "CVE-2022-35737",
      "cwe": {
        "id": "CWE-129",
        "name": "Improper Validation of Array Index"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite 1.0.12 through 3.39.x before 3.39.2 sometimes allows an array-bounds overflow if billions of bytes are used in a string argument to a C API.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-35737"
    },
    {
      "cve": "CVE-2022-37434",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "zlib through 1.2.12 has a heap-based buffer over-read or buffer overflow in inflate in inflate.c via a large gzip header extra field. NOTE: only applications that call inflateGetHeader are affected. Some common applications bundle the affected zlib source code but may be unable to call inflateGetHeader (e.g., see the nodejs/node reference).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-37434"
    },
    {
      "cve": "CVE-2022-37454",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The Keccak XKCP SHA-3 reference implementation before fdc6fef has an integer overflow and resultant buffer overflow that allows attackers to execute arbitrary code or eliminate expected cryptographic properties. This occurs in the sponge function interface.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-37454"
    },
    {
      "cve": "CVE-2022-40303",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.10.3. When parsing a multi-gigabyte XML document with the XML_PARSE_HUGE parser option enabled, several integer counters can overflow. This results in an attempt to access an array at a negative 2GB offset, typically leading to a segmentation fault.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-40303"
    },
    {
      "cve": "CVE-2022-40304",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.10.3. Certain invalid XML entity definitions can corrupt a hash table key, potentially leading to subsequent logic errors. In one case, a double-free can be provoked.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-40304"
    },
    {
      "cve": "CVE-2022-40674",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libexpat before 2.4.9 has a use-after-free in the doContent function in xmlparse.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-40674"
    },
    {
      "cve": "CVE-2022-42898",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "PAC parsing in MIT Kerberos 5 (aka krb5) before 1.19.4 and 1.20.x before 1.20.1 has integer overflows that may lead to remote code execution (in KDC, kadmind, or a GSS or Kerberos application server) on 32-bit platforms (which have a resultant heap-based buffer overflow), and cause a denial of service on other platforms. This occurs in krb5_pac_parse in lib/krb5/krb/pac.c. Heimdal before 7.7.1 has \"a similar bug.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-42898"
    },
    {
      "cve": "CVE-2022-42915",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl before 7.86.0 has a double free. If curl is told to use an HTTP proxy for a transfer with a non-HTTP(S) URL, it sets up the connection to the remote server by issuing a CONNECT request to the proxy, and then tunnels the rest of the protocol through. An HTTP proxy might refuse this request (HTTP proxies often only allow outgoing connections to specific port numbers, like 443 for HTTPS) and instead return a non-200 status code to the client. Due to flaws in the error/cleanup handling, this could trigger a double free in curl if one of the following schemes were used in the URL for the transfer: dict, gopher, gophers, ldap, ldaps, rtmp, rtmps, or telnet. The earliest affected version is 7.77.0.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-42915"
    },
    {
      "cve": "CVE-2022-42916",
      "cwe": {
        "id": "CWE-319",
        "name": "Cleartext Transmission of Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In curl before 7.86.0, the HSTS check could be bypassed to trick it into staying with HTTP. Using its HSTS support, curl can be instructed to use HTTPS directly (instead of using an insecure cleartext HTTP step) even when HTTP is provided in the URL. This mechanism could be bypassed if the host name in the given URL uses IDN characters that get replaced with ASCII counterparts as part of the IDN conversion, e.g., using the character UTF-8 U+3002 (IDEOGRAPHIC FULL STOP) instead of the common ASCII full stop of U+002E (.). The earliest affected version is 7.77.0 2021-05-26.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-42916"
    },
    {
      "cve": "CVE-2022-43551",
      "cwe": {
        "id": "CWE-319",
        "name": "Cleartext Transmission of Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability exists in curl \u003c7.87.0 HSTS check that could be bypassed to trick it to keep using HTTP. Using its HSTS support, curl can be instructed to use HTTPS instead of using an insecure clear-text HTTP step even when HTTP is provided in the URL. However, the HSTS mechanism could be bypassed if the host name in the given URL first uses IDN characters that get replaced to ASCII counterparts as part of the IDN conversion. Like using the character UTF-8 U+3002 (IDEOGRAPHIC FULL STOP) instead of the common ASCII full stop U+002E (.). Then in a subsequent request, it does not detect the HSTS state and makes a clear text transfer. Because it would store the info IDN encoded but look for it IDN decoded.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-43551"
    },
    {
      "cve": "CVE-2022-43552",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl can be asked to tunnel virtually all protocols it supports through an HTTP proxy. HTTP proxies can (and often do) deny such tunnel operations using an appropriate HTTP error response code. When getting denied to tunnel the specific protocols SMB or TELNET, curl would use a heap-allocated struct after it had been freed, in its transfer shutdown code path.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-43552"
    },
    {
      "cve": "CVE-2022-43680",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libexpat through 2.4.9, there is a use-after free caused by overeager destruction of a shared DTD in XML_ExternalEntityParserCreate in out-of-memory situations.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-43680"
    },
    {
      "cve": "CVE-2022-45061",
      "cwe": {
        "id": "CWE-407",
        "name": "Inefficient Algorithmic Complexity"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in Python before 3.11.1. An unnecessary quadratic algorithm exists in one path when processing some inputs to the IDNA (RFC 3490) decoder, such that a crafted, unreasonably long name being presented to the decoder could lead to a CPU denial of service. Hostnames are often supplied by remote servers that could be controlled by a malicious actor; in such a scenario, they could trigger excessive CPU consumption on the client attempting to make use of an attacker-supplied supposed hostname. For example, the attack payload could be placed in the Location header of an HTTP response with status code 302. A fix is planned in 3.11.1, 3.10.9, 3.9.16, 3.8.16, and 3.7.16.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-45061"
    },
    {
      "cve": "CVE-2022-45873",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "systemd 250 and 251 allows local users to achieve a systemd-coredump deadlock by triggering a crash that has a long backtrace. This occurs in parse_elf_object in shared/elf-util.c. The exploitation methodology is to crash a binary calling the same function recursively, and put it in a deeply nested directory to make its backtrace large enough to cause the deadlock. This must be done 16 times when MaxConnections=16 is set for the systemd/units/systemd-coredump.socket file.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-45873"
    },
    {
      "cve": "CVE-2022-46908",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite through 3.40.0, when relying on --safe for execution of an untrusted CLI script, does not properly implement the azProhibitedFunctions protection mechanism, and instead allows UDF functions such as WRITEFILE.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.3,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-46908"
    },
    {
      "cve": "CVE-2022-48303",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU Tar through 1.34 has a one-byte out-of-bounds read that results in use of uninitialized memory for a conditional jump. Exploitation to change the flow of control has not been demonstrated. The issue occurs in from_header in list.c via a V7 archive in which mtime has approximately 11 whitespace characters.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-48303"
    },
    {
      "cve": "CVE-2022-48522",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Perl 5.34.0, function S_find_uninit_var in sv.c has a stack-based crash that can lead to remote code execution or local privilege escalation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-48522"
    },
    {
      "cve": "CVE-2022-48560",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free exists in Python through 3.9 via heappushpop in heapq.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-48560"
    },
    {
      "cve": "CVE-2023-0215",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The public API function BIO_new_NDEF is a helper function used for streaming ASN.1 data via a BIO. It is primarily used internally to OpenSSL to support the SMIME, CMS and PKCS7 streaming capabilities, but may also be called directly by end user applications. The function receives a BIO from the caller, prepends a new BIO_f_asn1 filter BIO onto the front of it to form a BIO chain, and then returns the new head of the BIO chain to the caller. Under certain conditions, for example if a CMS recipient public key is invalid, the new filter BIO is freed and the function returns a NULL result indicating a failure. However, in this case, the BIO chain is not properly cleaned up and the BIO passed by the caller still retains internal pointers to the previously freed filter BIO. If the caller then goes on to call BIO_pop() on the BIO then a use-after-free will occur. This will most likely result in a crash. This scenario occurs directly in the internal function B64_write_ASN1() which may cause BIO_new_NDEF() to be called and will subsequently call BIO_pop() on the BIO. This internal function is in turn called by the public API functions PEM_write_bio_ASN1_stream, PEM_write_bio_CMS_stream, PEM_write_bio_PKCS7_stream, SMIME_write_ASN1, SMIME_write_CMS and SMIME_write_PKCS7. Other public API functions that may be impacted by this include i2d_ASN1_bio_stream, BIO_new_CMS, BIO_new_PKCS7, i2d_CMS_bio_stream and i2d_PKCS7_bio_stream. The OpenSSL cms and smime command line applications are similarly affected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-0215"
    },
    {
      "cve": "CVE-2023-0286",
      "cwe": {
        "id": "CWE-843",
        "name": "Access of Resource Using Incompatible Type (\u0027Type Confusion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a type confusion vulnerability relating to X.400 address processing inside an X.509 GeneralName. X.400 addresses were parsed as an ASN1_STRING but the public structure definition for GENERAL_NAME incorrectly specified the type of the x400Address field as ASN1_TYPE. This field is subsequently interpreted by the OpenSSL function GENERAL_NAME_cmp as an ASN1_TYPE rather than an ASN1_STRING. When CRL checking is enabled (i.e. the application sets the X509_V_FLAG_CRL_CHECK flag), this vulnerability may allow an attacker to pass arbitrary pointers to a memcmp call, enabling them to read memory contents or enact a denial of service. In most cases, the attack requires the attacker to provide both the certificate chain and CRL, neither of which need to have a valid signature. If the attacker only controls one of these inputs, the other input must already contain an X.400 address as a CRL distribution point, which is uncommon. As such, this vulnerability is most likely to only affect applications which have implemented their own functionality for retrieving CRLs over a network.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Disable CRL (certification revocation list) checking, if possible",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-0286"
    },
    {
      "cve": "CVE-2023-0361",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A timing side-channel in the handling of RSA ClientKeyExchange messages was discovered in GnuTLS. This side-channel can be sufficient to recover the key encrypted in the RSA ciphertext across a network in a Bleichenbacher style attack. To achieve a successful decryption the attacker would need to send a large amount of specially crafted messages to the vulnerable server. By recovering the secret from the ClientKeyExchange message, the attacker would be able to decrypt the application data exchanged over that connection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-0361"
    },
    {
      "cve": "CVE-2023-0464",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A security vulnerability has been identified in all supported versions of OpenSSL related to the verification of X.509 certificate chains that include policy constraints. Attackers may be able to exploit this vulnerability by creating a malicious certificate chain that triggers exponential use of computational resources, leading to a denial-of-service (DoS) attack on affected systems.\r\n\r\nPolicy processing is disabled by default but can be enabled by passing the `-policy` argument to the command line utilities or by calling the `X509_VERIFY_PARAM_set1_policies()` function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-0464"
    },
    {
      "cve": "CVE-2023-0465",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Applications that use a non-default option when verifying certificates may be\r\nvulnerable to an attack from a malicious CA to circumvent certain checks.\r\n\r\nInvalid certificate policies in leaf certificates are silently ignored by\r\nOpenSSL and other certificate policy checks are skipped for that certificate.\r\nA malicious CA could use this to deliberately assert invalid certificate policies\r\nin order to circumvent policy checking on the certificate altogether.\r\n\r\nPolicy processing is disabled by default but can be enabled by passing\r\nthe `-policy` argument to the command line utilities or by calling the\r\n`X509_VERIFY_PARAM_set1_policies()` function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-0465"
    },
    {
      "cve": "CVE-2023-0466",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The function X509_VERIFY_PARAM_add0_policy() is documented to\r\nimplicitly enable the certificate policy check when doing certificate\r\nverification. However the implementation of the function does not\r\nenable the check which allows certificates with invalid or incorrect\r\npolicies to pass the certificate verification.\r\n\r\nAs suddenly enabling the policy check could break existing deployments it was\r\ndecided to keep the existing behavior of the X509_VERIFY_PARAM_add0_policy()\r\nfunction.\r\n\r\nInstead the applications that require OpenSSL to perform certificate\r\npolicy check need to use X509_VERIFY_PARAM_set1_policies() or explicitly\r\nenable the policy check by calling X509_VERIFY_PARAM_set_flags() with\r\nthe X509_V_FLAG_POLICY_CHECK flag argument.\r\n\r\nCertificate policy checks are disabled by default in OpenSSL and are not\r\ncommonly used by applications.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-0466"
    },
    {
      "cve": "CVE-2023-0687",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in GNU C Library 2.38. It has been declared as critical. This vulnerability affects the function __monstartup of the file gmon.c of the component Call Graph Monitor. The manipulation leads to buffer overflow. It is recommended to apply a patch to fix this issue. VDB-220246 is the identifier assigned to this vulnerability. NOTE: The real existence of this vulnerability is still doubted at the moment. The inputs that induce this vulnerability are basically addresses of the running application that is built with gmon enabled. It\u0027s basically trusted input or input that needs an actual security flaw to be compromised or controlled.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.6,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:A/AC:H/PR:L/UI:N/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-0687"
    },
    {
      "cve": "CVE-2023-1077",
      "cwe": {
        "id": "CWE-843",
        "name": "Access of Resource Using Incompatible Type (\u0027Type Confusion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, pick_next_rt_entity() may return a type confused entry, not detected by the BUG_ON condition, as the confused entry will not be NULL, but list_head.The buggy error condition would lead to a type confused entry with the list head,which would then be used as a type confused sched_rt_entity,causing memory corruption.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-1077"
    },
    {
      "cve": "CVE-2023-1206",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A hash collision flaw was found in the IPv6 connection lookup table in the Linux kernel\u2019s IPv6 functionality when a user makes a new kind of SYN flood attack. A user located in the local network or with a high bandwidth connection can increase the CPU usage of the server that accepts IPV6 connections up to 95%.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-1206"
    },
    {
      "cve": "CVE-2023-2650",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Processing some specially crafted ASN.1 object identifiers or data containing them may be very slow. Impact summary: Applications that use OBJ_obj2txt() directly, or use any of the OpenSSL subsystems OCSP, PKCS7/SMIME, CMS, CMP/CRMF or TS with no message size limit may experience notable to very long delays when processing those messages, which may lead to a Denial of Service. An OBJECT IDENTIFIER is composed of a series of numbers - sub-identifiers - most of which have no size limit. OBJ_obj2txt() may be used to translate an ASN.1 OBJECT IDENTIFIER given in DER encoding form (using the OpenSSL type ASN1_OBJECT) to its canonical numeric text form, which are the sub-identifiers of the OBJECT IDENTIFIER in decimal form, separated by periods. When one of the sub-identifiers in the OBJECT IDENTIFIER is very large (these are sizes that are seen as absurdly large, taking up tens or hundreds of KiBs), the translation to a decimal number in text may take a very long time. The time complexity is O(square(n)) with \u0027n\u0027 being the size of the sub-identifiers in bytes (*). With OpenSSL 3.0, support to fetch cryptographic algorithms using names / identifiers in string form was introduced. This includes using OBJECT IDENTIFIERs in canonical numeric text form as identifiers for fetching algorithms. Such OBJECT IDENTIFIERs may be received through the ASN.1 structure AlgorithmIdentifier, which is commonly used in multiple protocols to specify what cryptographic algorithm should be used to sign or verify, encrypt or decrypt, or digest passed data. Applications that call OBJ_obj2txt() directly with untrusted data are affected, with any version of OpenSSL. If the use is for the mere purpose of display, the severity is considered low. In OpenSSL 3.0 and newer, this affects the subsystems OCSP, PKCS7/SMIME, CMS, CMP/CRMF or TS. It also impacts anything that processes X.509 certificates, including simple things like verifying its signature. The impact on TLS is relatively low, because all versions of OpenSSL have a 100KiB limit on the peer\u0027s certificate chain. Additionally, this only impacts clients, or servers that have explicitly enabled client authentication. In OpenSSL 1.1.1 and 1.0.2, this only affects displaying diverse objects, such as X.509 certificates. This is assumed to not happen in such a way that it would cause a Denial of Service, so these versions are considered not affected by this issue in such a way that it would be cause for concern, and the severity is therefore considered low.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-2650"
    },
    {
      "cve": "CVE-2023-2953",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in openldap. This security flaw causes a null pointer dereference in ber_memalloc_x() function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-2953"
    },
    {
      "cve": "CVE-2023-3212",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer dereference issue was found in the gfs2 file system in the Linux kernel. It occurs on corrupt gfs2 file systems when the evict code tries to reference the journal descriptor structure after it has been freed and set to NULL. A privileged local user could use this flaw to cause a kernel panic.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-3212"
    },
    {
      "cve": "CVE-2023-3446",
      "cwe": {
        "id": "CWE-606",
        "name": "Unchecked Input for Loop Condition"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. One of those checks confirms that the modulus (\u0027p\u0027 parameter) is not too large. Trying to use a very large modulus is slow and OpenSSL will not normally use a modulus which is over 10,000 bits in length. However the DH_check() function checks numerous aspects of the key or parameters that have been supplied. Some of those checks use the supplied modulus value even if it has already been found to be too large. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulernable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the \u0027-check\u0027 option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-3446"
    },
    {
      "cve": "CVE-2023-3609",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s net/sched: cls_u32 component can be exploited to achieve local privilege escalation.\r\n\r\nIf tcf_change_indev() fails, u32_set_parms() will immediately return an error after incrementing or decrementing the reference counter in tcf_bind_filter(). If an attacker can control the reference counter and set it to zero, they can cause the reference to be freed, leading to a use-after-free vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-3609"
    },
    {
      "cve": "CVE-2023-3611",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds write vulnerability in the Linux kernel\u0027s net/sched: sch_qfq component can be exploited to achieve local privilege escalation.\r\n\r\nThe qfq_change_agg() function in net/sched/sch_qfq.c allows an out-of-bounds write because lmax is updated according to packet sizes without bounds checks.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-3611"
    },
    {
      "cve": "CVE-2023-3772",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel\u0027s IP framework for transforming packets (XFRM subsystem). This issue may allow a malicious user with CAP_NET_ADMIN privileges to directly dereference a NULL pointer in xfrm_update_ae_params(), leading to a possible kernel crash and denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-3772"
    },
    {
      "cve": "CVE-2023-3817",
      "cwe": {
        "id": "CWE-834",
        "name": "Excessive Iteration"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. After fixing CVE-2023-3446 it was discovered that a large q parameter value can also trigger an overly long computation during some of these checks. A correct q value, if present, cannot be larger than the modulus p parameter, thus it is unnecessary to perform these checks if q is larger than p. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the \"-check\" option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-3817"
    },
    {
      "cve": "CVE-2023-4016",
      "cwe": {
        "id": "CWE-122",
        "name": "Heap-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Under some circumstances, this weakness allows a user who has access to run the \u201cps\u201d utility on a machine, the ability to write almost unlimited amounts of unfiltered data into the process heap.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 2.5,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-4016"
    },
    {
      "cve": "CVE-2023-4039",
      "cwe": {
        "id": "CWE-693",
        "name": "Protection Mechanism Failure"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A failure in the -fstack-protector feature in GCC-based toolchains \nthat target AArch64 allows an attacker to exploit an existing buffer \noverflow in dynamically-sized local variables in your application \nwithout this being detected. This stack-protector failure only applies \nto C99-style dynamically-sized local variables or those created using \nalloca(). The stack-protector operates as intended for statically-sized \nlocal variables.\n\nThe default behavior when the stack-protector \ndetects an overflow is to terminate your application, resulting in \ncontrolled loss of availability. An attacker who can exploit a buffer \noverflow without triggering the stack-protector might be able to change \nprogram flow control to cause an uncontrolled loss of availability or to\n go further and affect confidentiality or integrity.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.8,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-4039"
    },
    {
      "cve": "CVE-2023-4527",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in glibc. When the getaddrinfo function is called with the AF_UNSPEC address family and the system is configured with no-aaaa mode via /etc/resolv.conf, a DNS response via TCP larger than 2048 bytes can potentially disclose stack contents through the function returned address data, and may cause a crash.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-4527"
    },
    {
      "cve": "CVE-2023-4623",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s net/sched: sch_hfsc (HFSC qdisc traffic control) component can be exploited to achieve local privilege escalation.\n\nIf a class with a link-sharing curve (i.e. with the HFSC_FSC flag set) has a parent without a link-sharing curve, then init_vf() will call vttree_insert() on the parent, but vttree_remove() will be skipped in update_vf(). This leaves a dangling pointer that can cause a use-after-free.\n\nWe recommend upgrading past commit b3d26c5702c7d6c45456326e56d2ccf3f103e60f.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-4623"
    },
    {
      "cve": "CVE-2023-4806",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in glibc. In an extremely rare situation, the getaddrinfo function may access memory that has been freed, resulting in an application crash. This issue is only exploitable when a NSS module implements only the _nss_*_gethostbyname2_r and _nss_*_getcanonname_r hooks without implementing the _nss_*_gethostbyname3_r hook. The resolved name should return a large number of IPv6 and IPv4, and the call to the getaddrinfo function should have the AF_INET6 address family with AI_CANONNAME, AI_ALL and AI_V4MAPPED as flags.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-4806"
    },
    {
      "cve": "CVE-2023-4807",
      "cwe": {
        "id": "CWE-440",
        "name": "Expected Behavior Violation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: The POLY1305 MAC (message authentication code) implementation contains a bug that might corrupt the internal state of applications on the Windows 64 platform when running on newer X86_64 processors supporting the AVX512-IFMA instructions. Impact summary: If in an application that uses the OpenSSL library an attacker can influence whether the POLY1305 MAC algorithm is used, the application state might be corrupted with various application dependent consequences. The POLY1305 MAC (message authentication code) implementation in OpenSSL does not save the contents of non-volatile XMM registers on Windows 64 platform when calculating the MAC of data larger than 64 bytes. Before returning to the caller all the XMM registers are set to zero rather than restoring their previous content. The vulnerable code is used only on newer x86_64 processors supporting the AVX512-IFMA instructions. The consequences of this kind of internal application state corruption can be various - from no consequences, if the calling application does not depend on the contents of non-volatile XMM registers at all, to the worst consequences, where the attacker could get complete control of the application process. However given the contents of the registers are just zeroized so the attacker cannot put arbitrary values inside, the most likely consequence, if any, would be an incorrect result of some application dependent calculations or a crash leading to a denial of service. The POLY1305 MAC algorithm is most frequently used as part of the CHACHA20-POLY1305 AEAD (authenticated encryption with associated data) algorithm. The most common usage of this AEAD cipher is with TLS protocol versions 1.2 and 1.3 and a malicious client can influence whether this AEAD cipher is used by the server. This implies that server applications using OpenSSL can be potentially impacted. However we are currently not aware of any concrete application that would be affected by this issue therefore we consider this a Low severity security issue. As a workaround the AVX512-IFMA instructions support can be disabled at runtime by setting the environment variable OPENSSL_ia32cap: OPENSSL_ia32cap=:~0x200000 The FIPS provider is not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-4807"
    },
    {
      "cve": "CVE-2023-4813",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in glibc. In an uncommon situation, the gaih_inet function may use memory that has been freed, resulting in an application crash. This issue is only exploitable when the getaddrinfo function is called and the hosts database in /etc/nsswitch.conf is configured with SUCCESS=continue or SUCCESS=merge.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-4813"
    },
    {
      "cve": "CVE-2023-4911",
      "cwe": {
        "id": "CWE-121",
        "name": "Stack-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A buffer overflow was discovered in the GNU C Library\u0027s dynamic loader ld.so while processing the GLIBC_TUNABLES environment variable. This issue could allow a local attacker to use maliciously crafted GLIBC_TUNABLES environment variables when launching binaries with SUID permission to execute code with elevated privileges.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-4911"
    },
    {
      "cve": "CVE-2023-4921",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s net/sched: sch_qfq component can be exploited to achieve local privilege escalation.\n\nWhen the plug qdisc is used as a class of the qfq qdisc, sending network packets triggers use-after-free in qfq_dequeue() due to the incorrect .peek handler of sch_plug and lack of error checking in agg_dequeue().\n\nWe recommend upgrading past commit 8fc134fee27f2263988ae38920bc03da416b03d8.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-4921"
    },
    {
      "cve": "CVE-2023-5156",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the GNU C Library. A recent fix for CVE-2023-4806 introduced the potential for a memory leak, which may result in an application crash.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-5156"
    },
    {
      "cve": "CVE-2023-5678",
      "cwe": {
        "id": "CWE-606",
        "name": "Unchecked Input for Loop Condition"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Generating excessively long X9.42 DH keys or checking excessively long X9.42 DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_generate_key() to generate an X9.42 DH key may experience long delays. Likewise, applications that use DH_check_pub_key(), DH_check_pub_key_ex() or EVP_PKEY_public_check() to check an X9.42 DH key or X9.42 DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. While DH_check() performs all the necessary checks (as of CVE-2023-3817), DH_check_pub_key() doesn\u0027t make any of these checks, and is therefore vulnerable for excessively large P and Q parameters. Likewise, while DH_generate_key() performs a check for an excessively large P, it doesn\u0027t check for an excessively large Q. An application that calls DH_generate_key() or DH_check_pub_key() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. DH_generate_key() and DH_check_pub_key() are also called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_pub_key_ex(), EVP_PKEY_public_check(), and EVP_PKEY_generate(). Also vulnerable are the OpenSSL pkey command line application when using the \"-pubcheck\" option, as well as the OpenSSL genpkey command line application. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-5678"
    },
    {
      "cve": "CVE-2023-5717",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A heap out-of-bounds write vulnerability in the Linux kernel\u0027s Linux Kernel Performance Events (perf) component can be exploited to achieve local privilege escalation.\r\n\r\nIf perf_read_group() is called while an event\u0027s sibling_list is smaller than its child\u0027s sibling_list, it can increment or write to memory locations outside of the allocated buffer.\r\n\r\nWe recommend upgrading past commit 32671e3799ca2e4590773fd0e63aaa4229e50c06.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-5717"
    },
    {
      "cve": "CVE-2023-5981",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found that the response times to malformed ciphertexts in RSA-PSK ClientKeyExchange differ from response times of ciphertexts with correct PKCS#1 v1.5 padding.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-5981"
    },
    {
      "cve": "CVE-2023-6121",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds read vulnerability was found in the NVMe-oF/TCP subsystem in the Linux kernel. This issue may allow a remote attacker to send a crafted TCP packet, triggering a heap-based buffer overflow that results in kmalloc data being printed and potentially leaked to the kernel ring buffer (dmesg).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-6121"
    },
    {
      "cve": "CVE-2023-6817",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s netfilter: nf_tables component can be exploited to achieve local privilege escalation.\n\nThe function nft_pipapo_walk did not skip inactive elements during set walk which could lead double deactivations of PIPAPO (Pile Packet Policies) elements, leading to use-after-free.\n\nWe recommend upgrading past commit 317eb9685095678f2c9f5a8189de698c5354316a.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-6817"
    },
    {
      "cve": "CVE-2023-6931",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A heap out-of-bounds write vulnerability in the Linux kernel\u0027s Performance Events system component can be exploited to achieve local privilege escalation.\n\nA perf_event\u0027s read_size can overflow, leading to an heap out-of-bounds increment or write in perf_read_group().\n\nWe recommend upgrading past commit 382c27f4ed28f803b1f1473ac2d8db0afc795a1b.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-6931"
    },
    {
      "cve": "CVE-2023-6932",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s ipv4: igmp component can be exploited to achieve local privilege escalation.\n\nA race condition can be exploited to cause a timer be mistakenly registered on a RCU read locked object which is freed by another thread.\n\nWe recommend upgrading past commit e2b706c691905fe78468c361aaabc719d0a496f1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-6932"
    },
    {
      "cve": "CVE-2023-23914",
      "cwe": {
        "id": "CWE-319",
        "name": "Cleartext Transmission of Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A cleartext transmission of sensitive information vulnerability exists in curl \u003cv7.88.0 that could cause HSTS functionality fail when multiple URLs are requested serially. Using its HSTS support, curl can be instructed to use HTTPS instead of usingan insecure clear-text HTTP step even when HTTP is provided in the URL. ThisHSTS mechanism would however surprisingly be ignored by subsequent transferswhen done on the same command line because the state would not be properlycarried on.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-23914"
    },
    {
      "cve": "CVE-2023-23915",
      "cwe": {
        "id": "CWE-319",
        "name": "Cleartext Transmission of Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A cleartext transmission of sensitive information vulnerability exists in curl \u003cv7.88.0 that could cause HSTS functionality to behave incorrectly when multiple URLs are requested in parallel. Using its HSTS support, curl can be instructed to use HTTPS instead of using an insecure clear-text HTTP step even when HTTP is provided in the URL. This HSTS mechanism would however surprisingly fail when multiple transfers are done in parallel as the HSTS cache file gets overwritten by the most recentlycompleted transfer. A later HTTP-only transfer to the earlier host name would then *not* get upgraded properly to HSTS.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-23915"
    },
    {
      "cve": "CVE-2023-23916",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An allocation of resources without limits or throttling vulnerability exists in curl \u003cv7.88.0 based on the \"chained\" HTTP compression algorithms, meaning that a server response can be compressed multiple times and potentially with differentalgorithms. The number of acceptable \"links\" in this \"decompression chain\" wascapped, but the cap was implemented on a per-header basis allowing a maliciousserver to insert a virtually unlimited number of compression steps simply byusing many headers. The use of such a decompression chain could result in a \"malloc bomb\", making curl end up spending enormous amounts of allocated heap memory, or trying to and returning out of memory errors.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-23916"
    },
    {
      "cve": "CVE-2023-24329",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue in the urllib.parse component of Python before 3.11.4 allows attackers to bypass blocklisting methods by supplying a URL that starts with blank characters.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-24329"
    },
    {
      "cve": "CVE-2023-25136",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "OpenSSH server (sshd) 9.1 introduced a double-free vulnerability during options.kex_algorithms handling. This is fixed in OpenSSH 9.2. The double free can be leveraged, by an unauthenticated remote attacker in the default configuration, to jump to any location in the sshd address space. One third-party report states \"remote code execution is theoretically possible.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-25136"
    },
    {
      "cve": "CVE-2023-25139",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "sprintf in the GNU C Library (glibc) 2.37 has a buffer overflow (out-of-bounds write) in some situations with a correct buffer size. This is unrelated to CWE-676. It may write beyond the bounds of the destination buffer when attempting to write a padded, thousands-separated string representation of a number, if the buffer is allocated the exact size required to represent that number as a string. For example, 1,234,567 (with padding to 13) overflows by two bytes.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-25139"
    },
    {
      "cve": "CVE-2023-26604",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "systemd before 247 does not adequately block local privilege escalation for some Sudo configurations, e.g., plausible sudoers files in which the \"systemctl status\" command may be executed. Specifically, systemd does not set LESSSECURE to 1, and thus other programs may be launched from the less program. This presents a substantial security risk when running systemctl from Sudo, because less executes as root when the terminal size is too small to show the complete systemctl output.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-26604"
    },
    {
      "cve": "CVE-2023-27371",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU libmicrohttpd before 0.9.76 allows remote DoS (Denial of Service) due to improper parsing of a multipart/form-data boundary in the postprocessor.c MHD_create_post_processor() method. This allows an attacker to remotely send a malicious HTTP POST packet that includes one or more \u0027\\0\u0027 bytes in a multipart/form-data boundary field, which - assuming a specific heap layout - will result in an out-of-bounds read and a crash in the find_boundary() function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AC:H/AV:N/A:H/C:N/I:N/PR:N/S:U/UI:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-27371"
    },
    {
      "cve": "CVE-2023-27533",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability in input validation exists in curl \u003c8.0 during communication using the TELNET protocol may allow an attacker to pass on maliciously crafted user name and \"telnet options\" during server negotiation. The lack of proper input scrubbing allows an attacker to send content or perform option negotiation without the application\u0027s intent. This vulnerability could be exploited if an application allows user input, thereby enabling attackers to execute arbitrary code on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-27533"
    },
    {
      "cve": "CVE-2023-27534",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A path traversal vulnerability exists in curl \u003c8.0.0 SFTP implementation causes the tilde (~) character to be wrongly replaced when used as a prefix in the first path element, in addition to its intended use as the first element to indicate a path relative to the user\u0027s home directory. Attackers can exploit this flaw to bypass filtering or execute arbitrary code by crafting a path like /~2/foo while accessing a server with a specific user.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-27534"
    },
    {
      "cve": "CVE-2023-27535",
      "cwe": {
        "id": "CWE-287",
        "name": "Improper Authentication"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An authentication bypass vulnerability exists in libcurl \u003c8.0.0 in the FTP connection reuse feature that can result in wrong credentials being used during subsequent transfers. Previously created connections are kept in a connection pool for reuse if they match the current setup. However, certain FTP settings such as CURLOPT_FTP_ACCOUNT, CURLOPT_FTP_ALTERNATIVE_TO_USER, CURLOPT_FTP_SSL_CCC, and CURLOPT_USE_SSL were not included in the configuration match checks, causing them to match too easily. This could lead to libcurl using the wrong credentials when performing a transfer, potentially allowing unauthorized access to sensitive information.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-27535"
    },
    {
      "cve": "CVE-2023-27536",
      "cwe": {
        "id": "CWE-287",
        "name": "Improper Authentication"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An authentication bypass vulnerability exists libcurl \u003c8.0.0 in the connection reuse feature which can reuse previously established connections with incorrect user permissions due to a failure to check for changes in the CURLOPT_GSSAPI_DELEGATION option. This vulnerability affects krb5/kerberos/negotiate/GSSAPI transfers and could potentially result in unauthorized access to sensitive information. The safest option is to not reuse connections if the CURLOPT_GSSAPI_DELEGATION option has been changed.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-27536"
    },
    {
      "cve": "CVE-2023-27537",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A double free vulnerability exists in libcurl \u003c8.0.0 when sharing HSTS data between separate \"handles\". This sharing was introduced without considerations for do this sharing across separate threads but there was no indication of this fact in the documentation. Due to missing mutexes or thread locks, two threads sharing the same HSTS data could end up doing a double-free or use-after-free.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-27537"
    },
    {
      "cve": "CVE-2023-27538",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl would reuse a previously created connection even when an SSH related option had been changed that should have prohibited reuse. libcurl keeps previously used connections in a connection pool for subsequent transfers to reuse if one of them matches the setup. However, two SSH settings were left out from the configuration match checks, making them match too easily.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-27538"
    },
    {
      "cve": "CVE-2023-28484",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libxml2 before 2.10.4, parsing of certain invalid XSD schemas can lead to a NULL pointer dereference and subsequently a segfault. This occurs in xmlSchemaFixupComplexType in xmlschemas.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-28484"
    },
    {
      "cve": "CVE-2023-28531",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ssh-add in OpenSSH before 9.3 adds smartcard keys to ssh-agent without the intended per-hop destination constraints. The earliest affected version is 8.9.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-28531"
    },
    {
      "cve": "CVE-2023-29383",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Shadow 4.13, it is possible to inject control characters into fields provided to the SUID program chfn (change finger). Although it is not possible to exploit this directly (e.g., adding a new user fails because \\n is in the block list), it is possible to misrepresent the /etc/passwd file when viewed. Use of \\r manipulations and Unicode characters to work around blocking of the : character make it possible to give the impression that a new user has been added. In other words, an adversary may be able to convince a system administrator to take the system offline (an indirect, social-engineered denial of service) by demonstrating that \"cat /etc/passwd\" shows a rogue user account.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-29383"
    },
    {
      "cve": "CVE-2023-29469",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.10.4. When hashing empty dict strings in a crafted XML document, xmlDictComputeFastKey in dict.c can produce non-deterministic values, leading to various logic and memory errors, such as a double free. This behavior occurs because there is an attempt to use the first byte of an empty string, and any value is possible (not solely the \u0027\\0\u0027 value).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-29469"
    },
    {
      "cve": "CVE-2023-29491",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ncurses before 6.4 20230408, when used by a setuid application, allows local users to trigger security-relevant memory corruption via malformed data in a terminfo database file that is found in $HOME/.terminfo or reached via the TERMINFO or TERM environment variable.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-29491"
    },
    {
      "cve": "CVE-2023-29499",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in GLib. GVariant deserialization fails to validate that the input conforms to the expected format, leading to denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-29499"
    },
    {
      "cve": "CVE-2023-31085",
      "cwe": {
        "id": "CWE-369",
        "name": "Divide By Zero"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in drivers/mtd/ubi/cdev.c in the Linux kernel 6.2. There is a divide-by-zero error in do_div(sz,mtd-\u003eerasesize), used indirectly by ctrl_cdev_ioctl, when mtd-\u003eerasesize is 0.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-31085"
    },
    {
      "cve": "CVE-2023-32611",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in GLib. GVariant deserialization is vulnerable to a slowdown issue where a crafted GVariant can cause excessive processing, leading to denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-32611"
    },
    {
      "cve": "CVE-2023-32636",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in glib, where the gvariant deserialization code is vulnerable to a denial of service introduced by additional input validation added to resolve CVE-2023-29499. The offset table validation may be very slow. This bug does not affect any released version of glib but does affect glib distributors who followed the guidance of glib developers to backport the initial fix for CVE-2023-29499.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-32636"
    },
    {
      "cve": "CVE-2023-32643",
      "cwe": {
        "id": "CWE-122",
        "name": "Heap-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in GLib. The GVariant deserialization code is vulnerable to a heap buffer overflow introduced by the fix for CVE-2023-32665. This bug does not affect any released version of GLib, but does affect GLib distributors who followed the guidance of GLib developers to backport the initial fix for CVE-2023-32665.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-32643"
    },
    {
      "cve": "CVE-2023-32665",
      "cwe": {
        "id": "CWE-502",
        "name": "Deserialization of Untrusted Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in GLib. GVariant deserialization is vulnerable to an exponential blowup issue where a crafted GVariant can cause excessive processing, leading to denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-32665"
    },
    {
      "cve": "CVE-2023-34319",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The fix for XSA-423 added logic to Linux\u0027es netback driver to deal with\na frontend splitting a packet in a way such that not all of the headers\nwould come in one piece.  Unfortunately the logic introduced there\ndidn\u0027t account for the extreme case of the entire packet being split\ninto as many pieces as permitted by the protocol, yet still being\nsmaller than the area that\u0027s specially dealt with to keep all (possible)\nheaders together.  Such an unusual packet would therefore trigger a\nbuffer overrun in the driver.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-34319"
    },
    {
      "cve": "CVE-2023-34969",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "D-Bus before 1.15.6 sometimes allows unprivileged users to crash dbus-daemon. If a privileged user with control over the dbus-daemon is using the org.freedesktop.DBus.Monitoring interface to monitor message bus traffic, then an unprivileged user with the ability to connect to the same dbus-daemon can cause a dbus-daemon crash under some circumstances via an unreplyable message. When done on the well-known system bus, this is a denial-of-service vulnerability. The fixed versions are 1.12.28, 1.14.8, and 1.15.6.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-34969"
    },
    {
      "cve": "CVE-2023-35001",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Linux Kernel nftables Out-Of-Bounds Read/Write Vulnerability; nft_byteorder poorly handled vm register contents when CAP_NET_ADMIN is in any user or network namespace",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-35001"
    },
    {
      "cve": "CVE-2023-35945",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Envoy is a cloud-native high-performance edge/middle/service proxy. Envoy\u2019s HTTP/2 codec may leak a header map and bookkeeping structures upon receiving `RST_STREAM` immediately followed by the `GOAWAY` frames from an upstream server. In nghttp2, cleanup of pending requests due to receipt of the `GOAWAY` frame skips de-allocation of the bookkeeping structure and pending compressed header. The error return [code path] is taken if connection is already marked for not sending more requests due to `GOAWAY` frame. The clean-up code is right after the return statement, causing memory leak. Denial of service through memory exhaustion. This vulnerability was patched in versions(s) 1.26.3, 1.25.8, 1.24.9, 1.23.11.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-35945"
    },
    {
      "cve": "CVE-2023-38408",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The PKCS#11 feature in ssh-agent in OpenSSH before 9.3p2 has an insufficiently trustworthy search path, leading to remote code execution if an agent is forwarded to an attacker-controlled system. (Code in /usr/lib is not necessarily safe for loading into ssh-agent.) NOTE: this issue exists because of an incomplete fix for CVE-2016-10009.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.7,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:R/S:C/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-38408"
    },
    {
      "cve": "CVE-2023-38545",
      "cwe": {
        "id": "CWE-122",
        "name": "Heap-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "This flaw makes curl overflow a heap based buffer in the SOCKS5 proxy handshake.\r\n\r\nWhen curl is asked to pass along the hostname to the SOCKS5 proxy to allow that to resolve the address instead of it getting done by curl itself, the maximum length that hostname can be is 255 bytes.\r\n\r\nIf the hostname is detected to be longer than 255 bytes, curl switches to local name resolving and instead passes on the resolved address only to the proxy. Due to a bug, the local variable that means \"let the host resolve the name\" could get the wrong value during a slow SOCKS5 handshake, and contrary to the intention, copy the too long hostname to the target buffer instead of copying just the resolved address there.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-38545"
    },
    {
      "cve": "CVE-2023-38546",
      "cwe": {
        "id": "CWE-73",
        "name": "External Control of File Name or Path"
      },
      "notes": [
        {
          "category": "summary",
          "text": "This flaw allows an attacker to insert cookies at will into a running program\r\nusing libcurl, if the specific series of conditions are met.\r\n\r\nlibcurl performs transfers. In its API, an application creates \"easy handles\"\r\nthat are the individual handles for single transfers.\r\n\r\nlibcurl provides a function call that duplicates en easy handle called\r\n[curl_easy_duphandle](https://curl.se/libcurl/c/curl_easy_duphandle.html).\r\n\r\nIf a transfer has cookies enabled when the handle is duplicated, the\r\ncookie-enable state is also cloned - but without cloning the actual\r\ncookies. If the source handle did not read any cookies from a specific file on\r\ndisk, the cloned version of the handle would instead store the file name as\r\n`none` (using the four ASCII letters, no quotes).\r\n\r\nSubsequent use of the cloned handle that does not explicitly set a source to\r\nload cookies from would then inadvertently load cookies from a file named\r\n`none` - if such a file exists and is readable in the current directory of the\r\nprogram using libcurl. And if using the correct file format of course.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-38546"
    },
    {
      "cve": "CVE-2023-39128",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU gdb (GDB) 13.0.50.20220805-git was discovered to contain a stack overflow via the function ada_decode at /gdb/ada-lang.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-39128"
    },
    {
      "cve": "CVE-2023-39189",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Netfilter subsystem in the Linux kernel. The nfnl_osf_add_callback function did not validate the user mode controlled opt_num field. This flaw allows a local privileged (CAP_NET_ADMIN) attacker to trigger an out-of-bounds read, leading to a crash or information disclosure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-39189"
    },
    {
      "cve": "CVE-2023-39192",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Netfilter subsystem in the Linux kernel. The xt_u32 module did not validate the fields in the xt_u32 structure. This flaw allows a local privileged attacker to trigger an out-of-bounds read by setting the size fields with a value beyond the array boundaries, leading to a crash or information disclosure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:C/C:H/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-39192"
    },
    {
      "cve": "CVE-2023-39193",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Netfilter subsystem in the Linux kernel. The sctp_mt_check did not validate the flag_count field. This flaw allows a local privileged (CAP_NET_ADMIN) attacker to trigger an out-of-bounds read, leading to a crash or information disclosure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-39193"
    },
    {
      "cve": "CVE-2023-39194",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the XFRM subsystem in the Linux kernel. The specific flaw exists within the processing of state filters, which can result in a read past the end of an allocated buffer. This flaw allows a local privileged (CAP_NET_ADMIN) attacker to trigger an out-of-bounds read, potentially leading to an information disclosure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.2,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:C/C:L/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-39194"
    },
    {
      "cve": "CVE-2023-39615",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Xmlsoft Libxml2 v2.11.0 was discovered to contain an out-of-bounds read via the xmlSAX2StartElement() function at /libxml2/SAX2.c. This vulnerability allows attackers to cause a Denial of Service (DoS) via supplying a crafted XML file. NOTE: the vendor\u0027s position is that the product does not support the legacy SAX1 interface with custom callbacks; there is a crash even without crafted input.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-39615"
    },
    {
      "cve": "CVE-2023-40283",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in l2cap_sock_release in net/bluetooth/l2cap_sock.c in the Linux kernel before 6.4.10. There is a use-after-free because the children of an sk are mishandled.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-40283"
    },
    {
      "cve": "CVE-2023-42754",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer dereference flaw was found in the Linux kernel ipv4 stack. The socket buffer (skb) was assumed to be associated with a device before calling __ip_options_compile, which is not always the case if the skb is re-routed by ipvs. This issue may allow a local user with CAP_NET_ADMIN privileges to crash the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-42754"
    },
    {
      "cve": "CVE-2023-42755",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the IPv4 Resource Reservation Protocol (RSVP) classifier in the Linux kernel. The xprt pointer may go beyond the linear part of the skb, leading to an out-of-bounds read in the `rsvp_classify` function. This issue may allow a local user to crash the system and cause a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-42755"
    },
    {
      "cve": "CVE-2023-44487",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The HTTP/2 protocol allows a denial of service (server resource consumption) because request cancellation can reset many streams quickly, as exploited in the wild in August through October 2023.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-44487"
    },
    {
      "cve": "CVE-2023-45322",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libxml2 through 2.11.5 has a use-after-free that can only occur after a certain memory allocation fails. This occurs in xmlUnlinkNode in tree.c. NOTE: the vendor\u0027s position is \"I don\u0027t think these issues are critical enough to warrant a CVE ID ... because an attacker typically can\u0027t control when memory allocations fail.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-45322"
    },
    {
      "cve": "CVE-2023-45853",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "MiniZip in zlib through 1.3 has an integer overflow and resultant heap-based buffer overflow in zipOpenNewFileInZip4_64 via a long filename, comment, or extra field. NOTE: MiniZip is not a supported part of the zlib product.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-45853"
    },
    {
      "cve": "CVE-2023-45871",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in drivers/net/ethernet/intel/igb/igb_main.c in the IGB driver in the Linux kernel before 6.5.3. A buffer size may not be adequate for frames larger than the MTU.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-45871"
    },
    {
      "cve": "CVE-2023-45898",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The Linux kernel before 6.5.4 has an es1 use-after-free in fs/ext4/extents_status.c, related to ext4_es_insert_extent.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-45898"
    },
    {
      "cve": "CVE-2023-45918",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ncurses 6.4-20230610 has a NULL pointer dereference in tgetstr in tinfo/lib_termcap.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-45918"
    },
    {
      "cve": "CVE-2023-46218",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "This flaw allows a malicious HTTP server to set \"super cookies\" in curl that are then passed back to more origins than what is otherwise allowed or possible. This allows a site to set cookies that then would get sent to different and unrelated sites and domains. It could do this by exploiting a mixed case flaw in curl\u0027s function that verifies a given cookie domain against the Public Suffix List (PSL). For example a cookie could be set with `domain=co.UK` when the URL used a lower case hostname `curl.co.uk`, even though `co.uk` is listed as a PSL domain.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-46218"
    },
    {
      "cve": "CVE-2023-46219",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When saving HSTS data to an excessively long file name, curl could end up removing all contents, making subsequent requests using that file unaware of the HSTS status they should otherwise use.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-46219"
    },
    {
      "cve": "CVE-2023-46862",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel through 6.5.9. During a race with SQ thread exit, an io_uring/fdinfo.c io_uring_show_fdinfo NULL pointer dereference can occur.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-46862"
    },
    {
      "cve": "CVE-2023-48795",
      "cwe": {
        "id": "CWE-222",
        "name": "Truncation of Security-relevant Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The SSH transport protocol with certain OpenSSH extensions, found in OpenSSH before 9.6 and other products, allows remote attackers to bypass integrity checks such that some packets are omitted (from the extension negotiation message), and a client and server may consequently end up with a connection for which some security features have been downgraded or disabled, aka a Terrapin attack. This occurs because the SSH Binary Packet Protocol (BPP), implemented by these extensions, mishandles the handshake phase and mishandles use of sequence numbers. For example, there is an effective attack against SSH\u0027s use of ChaCha20-Poly1305 (and CBC with Encrypt-then-MAC). The bypass occurs in chacha20-poly1305@openssh.com and (if CBC is used) the -etm@openssh.com MAC algorithms. This also affects Maverick Synergy Java SSH API before 3.1.0-SNAPSHOT, Dropbear through 2022.83, Ssh before 5.1.1 in Erlang/OTP, PuTTY before 0.80, AsyncSSH before 2.14.2, golang.org/x/crypto before 0.17.0, libssh before 0.10.6, libssh2 through 1.11.0, Thorn Tech SFTP Gateway before 3.4.6, Tera Term before 5.1, Paramiko before 3.4.0, jsch before 0.2.15, SFTPGo before 2.5.6, Netgate pfSense Plus through 23.09.1, Netgate pfSense CE through 2.7.2, HPN-SSH through 18.2.0, ProFTPD before 1.3.8b (and before1.3.9rc2), ORYX CycloneSSH before 2.3.4, NetSarang XShell 7 before Build 0144, CrushFTP before 10.6.0, ConnectBot SSH library before 2.2.22, Apache MINA sshd through 2.11.0, sshj through 0.37.0, TinySSH through 20230101, trilead-ssh2 6401, the net-ssh gem 7.2.0 for Ruby, the mscdex ssh2 module before 1.15.0 for Node.js, the thrussh library before 0.35.1 for Rust, and the Russh crate before 0.40.2 for Rust; and there could be effects on Bitvise SSH through 9.31.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-48795"
    },
    {
      "cve": "CVE-2023-52425",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libexpat through 2.5.0 allows a denial of service (resource consumption) because many full reparsings are required in the case of a large token for which multiple buffer fills are needed.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-52425"
    },
    {
      "cve": "CVE-2023-52426",
      "cwe": {
        "id": "CWE-776",
        "name": "Improper Restriction of Recursive Entity References in DTDs (\u0027XML Entity Expansion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libexpat through 2.5.0 allows recursive XML Entity Expansion if XML_DTD is undefined at compile time.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-52426"
    },
    {
      "cve": "CVE-2023-52444",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid dirent corruption As Al reported in link[1]: f2fs_rename() ... if (old_dir != new_dir \u0026\u0026 !whiteout) f2fs_set_link(old_inode, old_dir_entry, old_dir_page, new_dir); else f2fs_put_page(old_dir_page, 0); You want correct inumber in the \"..\" link. And cross-directory rename does move the source to new parent, even if you\u0027d been asked to leave a whiteout in the old place. [1] https://lore.kernel.org/all/20231017055040.GN800259@ZenIV/ With below testcase, it may cause dirent corruption, due to it missed to call f2fs_set_link() to update \"..\" link to new directory. - mkdir -p dir/foo - renameat2 -w dir/foo bar [ASSERT] (__chk_dots_dentries:1421) --\u003e Bad inode number[0x4] for \u0027..\u0027, parent parent ino is [0x3] [FSCK] other corrupted bugs [Fail]",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-52444"
    },
    {
      "cve": "CVE-2023-52464",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: EDAC/thunderx: Fix possible out-of-bounds string access Enabling -Wstringop-overflow globally exposes a warning for a common bug in the usage of strncat(): drivers/edac/thunderx_edac.c: In function \u0027thunderx_ocx_com_threaded_isr\u0027: drivers/edac/thunderx_edac.c:1136:17: error: \u0027strncat\u0027 specified bound 1024 equals destination size [-Werror=stringop-overflow=] 1136 | strncat(msg, other, OCX_MESSAGE_SIZE); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ... 1145 | strncat(msg, other, OCX_MESSAGE_SIZE); ... 1150 | strncat(msg, other, OCX_MESSAGE_SIZE); ... Apparently the author of this driver expected strncat() to behave the way that strlcat() does, which uses the size of the destination buffer as its third argument rather than the length of the source buffer. The result is that there is no check on the size of the allocated buffer. Change it to strlcat(). [ bp: Trim compiler output, fixup commit message. ]",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-52464"
    },
    {
      "cve": "CVE-2023-52612",
      "cwe": {
        "id": "CWE-121",
        "name": "Stack-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: crypto: scomp - fix req-\u003edst buffer overflow The req-\u003edst buffer size should be checked before copying from the scomp_scratch-\u003edst to avoid req-\u003edst buffer overflow problem.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.0,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-52612"
    },
    {
      "cve": "CVE-2023-52622",
      "cwe": {
        "id": "CWE-131",
        "name": "Incorrect Calculation of Buffer Size"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: ext4: avoid online resizing failures due to oversized flex bg.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-52622"
    },
    {
      "cve": "CVE-2023-52675",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: powerpc/imc-pmu: Add a null pointer check in update_events_in_group() kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-52675"
    },
    {
      "cve": "CVE-2023-52699",
      "cwe": {
        "id": "CWE-833",
        "name": "Deadlock"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: sysv: don\u0027t call sb_bread() with pointers_lock held syzbot is reporting sleep in atomic context in SysV filesystem [1], for sb_bread() is called with rw_spinlock held. A \"write_lock(\u0026pointers_lock) =\u003e read_lock(\u0026pointers_lock) deadlock\" bug and a \"sb_bread() with write_lock(\u0026pointers_lock)\" bug were introduced by \"Replace BKL for chain locking with sysvfs-private rwlock\" in Linux 2.5.12. Then, \"[PATCH] err1-40: sysvfs locking fix\" in Linux 2.6.8 fixed the former bug by moving pointers_lock lock to the callers, but instead introduced a \"sb_bread() with read_lock(\u0026pointers_lock)\" bug (which made this problem easier to hit). Al Viro suggested that why not to do like get_branch()/get_block()/ find_shared() in Minix filesystem does. And doing like that is almost a revert of \"[PATCH] err1-40: sysvfs locking fix\" except that get_branch() from with find_shared() is called without write_lock(\u0026pointers_lock).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-52699"
    },
    {
      "cve": "CVE-2024-0584",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free issue was found in igmp_start_timer in net/ipv4/igmp.c in the network sub-component in the Linux Kernel. This flaw allows a local user to observe a refcnt use-after-free issue when receiving an igmp query packet, leading to a kernel information leak.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-0584"
    },
    {
      "cve": "CVE-2024-2004",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When a protocol selection parameter option disables all protocols without adding any then the default set of protocols would remain in the allowed set due to an error in the logic for removing protocols. The below command would perform a request to curl.se with a plaintext protocol which has been explicitly disabled.      curl --proto -all,-http http://curl.se  The flaw is only present if the set of selected protocols disables the entire set of available protocols, in itself a command with no practical use and therefore unlikely to be encountered in real situations. The curl security team has thus assessed this to be low severity bug.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-2004"
    },
    {
      "cve": "CVE-2024-2236",
      "cwe": {
        "id": "CWE-208",
        "name": "Observable Timing Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A timing-based side-channel flaw was found in libgcrypt\u0027s RSA implementation. This issue may allow a remote attacker to initiate a Bleichenbacher-style attack, which can lead to the decryption of RSA ciphertexts.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-2236"
    },
    {
      "cve": "CVE-2024-2379",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl skips the certificate verification for a QUIC connection under certain conditions, when built to use wolfSSL. If told to use an unknown/bad cipher or curve, the error path accidentally skips the verification and returns OK, thus ignoring any certificate problems.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-2379"
    },
    {
      "cve": "CVE-2024-2398",
      "cwe": {
        "id": "CWE-772",
        "name": "Missing Release of Resource after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When an application tells libcurl it wants to allow HTTP/2 server push, and the amount of received headers for the push surpasses the maximum allowed limit (1000), libcurl aborts the server push. When aborting, libcurl inadvertently does not free all the previously allocated headers and instead leaks the memory.  Further, this error condition fails silently and is therefore not easily detected by an application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-2398"
    },
    {
      "cve": "CVE-2024-2466",
      "cwe": {
        "id": "CWE-297",
        "name": "Improper Validation of Certificate with Host Mismatch"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl did not check the server certificate of TLS connections done to a host specified as an IP address, when built to use mbedTLS.  libcurl would wrongly avoid using the set hostname function when the specified hostname was given as an IP address, therefore completely skipping the certificate check. This affects all uses of TLS protocols (HTTPS, FTPS, IMAPS, POPS3, SMTPS, etc).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:H/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-2466"
    },
    {
      "cve": "CVE-2024-2511",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Some non-default TLS server configurations can cause unbounded memory growth when processing TLSv1.3 sessions. An attacker may exploit certain server configurations to trigger unbounded memory growth that would lead to a Denial of Service This problem can occur in TLSv1.3 if the non-default SSL_OP_NO_TICKET option is being used (but not if early_data support is also configured and the default anti-replay protection is in use). In this case, under certain conditions, the session cache can get into an incorrect state and it will fail to flush properly as it fills. The session cache will continue to grow in an unbounded manner. A malicious client could deliberately create the scenario for this failure to force a Denial of Service. It may also happen by accident in normal operation. This issue only affects TLS servers supporting TLSv1.3. It does not affect TLS clients. The FIPS modules in 3.2, 3.1 and 3.0 are not affected by this issue. OpenSSL 1.0.2 is also not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-2511"
    },
    {
      "cve": "CVE-2024-2961",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The iconv() function in the GNU C Library versions 2.39 and older may overflow the output buffer passed to it by up to 4 bytes when converting strings to the ISO-2022-CN-EXT character set, which may be used to crash an application or overwrite a neighbouring variable.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-2961"
    },
    {
      "cve": "CVE-2024-5535",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Calling the OpenSSL API function SSL_select_next_proto with an empty supported client protocols buffer may cause a crash or memory contents to be sent to the peer. Impact summary: A buffer overread can have a range of potential consequences such as unexpected application beahviour or a crash. In particular this issue could result in up to 255 bytes of arbitrary private data from memory being sent to the peer leading to a loss of confidentiality. However, only applications that directly call the SSL_select_next_proto function with a 0 length list of supported client protocols are affected by this issue. This would normally never be a valid scenario and is typically not under attacker control but may occur by accident in the case of a configuration or programming error in the calling application. The OpenSSL API function SSL_select_next_proto is typically used by TLS applications that support ALPN (Application Layer Protocol Negotiation) or NPN (Next Protocol Negotiation). NPN is older, was never standardised and is deprecated in favour of ALPN. We believe that ALPN is significantly more widely deployed than NPN. The SSL_select_next_proto function accepts a list of protocols from the server and a list of protocols from the client and returns the first protocol that appears in the server list that also appears in the client list. In the case of no overlap between the two lists it returns the first item in the client list. In either case it will signal whether an overlap between the two lists was found. In the case where SSL_select_next_proto is called with a zero length client list it fails to notice this condition and returns the memory immediately following the client list pointer (and reports that there was no overlap in the lists). This function is typically called from a server side application callback for ALPN or a client side application callback for NPN. In the case of ALPN the list of protocols supplied by the client is guaranteed by libssl to never be zero in length. The list of server protocols comes from the application and should never normally be expected to be of zero length. In this case if the SSL_select_next_proto function has been called as expected (with the list supplied by the client passed in the client/client_len parameters), then the application will not be vulnerable to this issue. If the application has accidentally been configured with a zero length server list, and has accidentally passed that zero length server list in the client/client_len parameters, and has additionally failed to correctly handle a \"no overlap\" response (which would normally result in a handshake failure in ALPN) then it will be vulnerable to this problem. In the case of NPN, the protocol permits the client to opportunistically select a protocol when there is no overlap. OpenSSL returns the first client protocol in the no overlap case in support of this. The list of client protocols comes from the application and should never normally be expected to be of zero length. However if the SSL_select_next_proto function is accidentally called with a client_len of 0 then an invalid memory pointer will be returned instead. If the application uses this output as the opportunistic protocol then the loss of confidentiality will occur. This issue has been assessed as Low severity because applications are most likely to be vulnerable if they are using NPN instead of ALPN - but NPN is not widely used. It also requires an application configuration or programming error. Finally, this issue would not typically be under attacker control making active exploitation unlikely. The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. Due to the low severity of this issue we are not issuing new releases of OpenSSL at this time. The fix will be included in the next releases when they become available.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-5535"
    },
    {
      "cve": "CVE-2024-5742",
      "cwe": {
        "id": "CWE-377",
        "name": "Insecure Temporary File"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in GNU Nano that allows a possible privilege escalation through an insecure temporary file. If Nano is killed while editing, a file it saves to an emergency file with the permissions of the running user provides a window of opportunity for attackers to escalate privileges through a malicious symlink.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:H/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-5742"
    },
    {
      "cve": "CVE-2024-6409",
      "cwe": {
        "id": "CWE-364",
        "name": "Signal Handler Race Condition"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A race condition vulnerability was discovered in how signals are handled by OpenSSH\u0027s server (sshd). If a remote attacker does not authenticate within a set time period, then sshd\u0027s SIGALRM handler is called asynchronously. However, this signal handler calls various functions that are not async-signal-safe, for example, syslog(). As a consequence of a successful attack, in the worst case scenario, an attacker may be able to perform a remote code execution (RCE) as an unprivileged user running the sshd server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:L/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-6409"
    },
    {
      "cve": "CVE-2024-7264",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl\u0027s ASN1 parser code has the `GTime2str()` function, used for parsing an ASN.1 Generalized Time field. If given an syntactically incorrect field, the parser might end up using -1 for the length of the *time fraction*, leading to a `strlen()` getting performed on a pointer to a heap buffer area that is not (purposely) null terminated. This flaw most likely leads to a crash, but can also lead to heap contents getting returned to the application when [CURLINFO_CERTINFO](https://curl.se/libcurl/c/CURLINFO_CERTINFO.html) is used.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-7264"
    },
    {
      "cve": "CVE-2024-8096",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl is told to use the Certificate Status Request TLS extension, often referred to as OCSP stapling, to verify that the server certificate is valid, it might fail to detect some OCSP problems and instead wrongly consider the response as fine. If the returned status reports another error than \u0027revoked\u0027 (like for example \u0027unauthorized\u0027) it is not treated as a bad certficate.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-8096"
    },
    {
      "cve": "CVE-2024-8176",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A stack overflow vulnerability exists in the libexpat library due to the way it handles recursive entity expansion in XML documents. When parsing an XML document with deeply nested entity references, libexpat can be forced to recurse indefinitely, exhausting the stack space and causing a crash. This issue could lead to denial of service (DoS) or, in some cases, exploitable memory corruption, depending on the environment and library usage.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-8176"
    },
    {
      "cve": "CVE-2024-9143",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Use of the low-level GF(2m) elliptic curve APIs with untrusted explicit values for the field polynomial can lead to out-of-bounds memory reads or writes. Impact summary: Out of bound memory writes can lead to an application crash or even a possibility of a remote code execution, however, in all the protocols involving Elliptic Curve Cryptography that we\u0027re aware of, either only \"named curves\" are supported, or, if explicit curve parameters are supported, they specify an X9.62 encoding of binary (GF(2m)) curves that can\u0027t represent problematic input values. Thus the likelihood of existence of a vulnerable application is low. In particular, the X9.62 encoding is used for ECC keys in X.509 certificates, so problematic inputs cannot occur in the context of processing X.509 certificates. Any problematic use-cases would have to be using an \"exotic\" curve encoding. The affected APIs include: EC_GROUP_new_curve_GF2m(), EC_GROUP_new_from_params(), and various supporting BN_GF2m_*() functions. Applications working with \"exotic\" explicit binary (GF(2m)) curve parameters, that make it possible to represent invalid field polynomials with a zero constant term, via the above or similar APIs, may terminate abruptly as a result of reading or writing outside of array bounds. Remote code execution cannot easily be ruled out. The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-9143"
    },
    {
      "cve": "CVE-2024-11053",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When asked to both use a `.netrc` file for credentials and to follow HTTP redirects, curl could leak the password used for the first host to the followed-to host under certain circumstances. This flaw only manifests itself if the netrc file has an entry that matches the redirect target hostname but the entry either omits just the password or omits both login and password.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-11053"
    },
    {
      "cve": "CVE-2024-12133",
      "cwe": {
        "id": "CWE-407",
        "name": "Inefficient Algorithmic Complexity"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw in libtasn1 causes inefficient handling of specific certificate data. When processing a large number of elements in a certificate, libtasn1 takes much longer than expected, which can slow down or even crash the system. This flaw allows an attacker to send a specially crafted certificate, causing a denial of service attack.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-12133"
    },
    {
      "cve": "CVE-2024-12243",
      "cwe": {
        "id": "CWE-407",
        "name": "Inefficient Algorithmic Complexity"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in GnuTLS, which relies on libtasn1 for ASN.1 data processing. Due to an inefficient algorithm in libtasn1, decoding certain DER-encoded certificate data can take excessive time, leading to increased resource consumption. This flaw allows a remote attacker to send a specially crafted certificate, causing GnuTLS to become unresponsive or slow, resulting in a denial-of-service condition.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-12243"
    },
    {
      "cve": "CVE-2024-26645",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: tracing: Ensure visibility when inserting an element into tracing_map.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-26645"
    },
    {
      "cve": "CVE-2024-26671",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: blk-mq: fix IO hang from sbitmap wakeup race.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-26671"
    },
    {
      "cve": "CVE-2024-26679",
      "cwe": {
        "id": "CWE-413",
        "name": "Improper Resource Locking"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved:\r\n\r\ninet: read sk-\u003esk_family once in inet_recv_error()",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-26679"
    },
    {
      "cve": "CVE-2024-26772",
      "cwe": {
        "id": "CWE-413",
        "name": "Improper Resource Locking"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved:\r\n\r\next4: avoid allocating blocks from corrupted group in ext4_mb_find_by_goal()\r\n\r\nPlaces the logic for checking if the group\u0027s block bitmap is corrupt under\r\nthe protection of the group lock to avoid allocating blocks from the group\r\nwith a corrupted block bitmap.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-26772"
    },
    {
      "cve": "CVE-2024-26773",
      "cwe": {
        "id": "CWE-413",
        "name": "Improper Resource Locking"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: ext4: avoid allocating blocks from corrupted group in ext4_mb_try_best_found().",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-26773"
    },
    {
      "cve": "CVE-2024-26777",
      "cwe": {
        "id": "CWE-369",
        "name": "Divide By Zero"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved:\r\n\r\nfbdev: sis: Error out if pixclock equals zero",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-26777"
    },
    {
      "cve": "CVE-2024-26805",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: netlink: Fix kernel-infoleak-after-free in skb_datagram_iter.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-26805"
    },
    {
      "cve": "CVE-2024-26835",
      "cwe": {
        "id": "CWE-459",
        "name": "Incomplete Cleanup"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved:\r\n\r\nnetfilter: nf_tables: set dormant flag on hook register failure",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-26835"
    },
    {
      "cve": "CVE-2024-26863",
      "cwe": {
        "id": "CWE-908",
        "name": "Use of Uninitialized Resource"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: hsr: Fix uninit-value access in hsr_get_node().",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-26863"
    },
    {
      "cve": "CVE-2024-26878",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: quota: Fix potential NULL pointer dereference.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-26878"
    },
    {
      "cve": "CVE-2024-26880",
      "cwe": {
        "id": "CWE-99",
        "name": "Improper Control of Resource Identifiers (\u0027Resource Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: dm: call the resume method on internal suspend.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-26880"
    },
    {
      "cve": "CVE-2024-26898",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-26898"
    },
    {
      "cve": "CVE-2024-26901",
      "cwe": {
        "id": "CWE-908",
        "name": "Use of Uninitialized Resource"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: do_sys_name_to_handle(): use kzalloc() to fix kernel-infoleak.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-26901"
    },
    {
      "cve": "CVE-2024-26923",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: af_unix: Fix garbage collector racing against connect().",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-26923"
    },
    {
      "cve": "CVE-2024-26957",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: fix reference counting on zcrypt card objects.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-26957"
    },
    {
      "cve": "CVE-2024-26973",
      "cwe": {
        "id": "CWE-457",
        "name": "Use of Uninitialized Variable"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: fat: fix uninitialized field in nostale filehandles When fat_encode_fh_nostale() encodes file handle without a parent it stores only first 10 bytes of the file handle. However the length of the file handle must be a multiple of 4 so the file handle is actually 12 bytes long and the last two bytes remain uninitialized. This is not great at we potentially leak uninitialized information with the handle to userspace. Properly initialize the full handle length.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-26973"
    },
    {
      "cve": "CVE-2024-27020",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: Fix potential data-race in nft_expr_type_get().",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-27020"
    },
    {
      "cve": "CVE-2024-27032",
      "cwe": {
        "id": "CWE-833",
        "name": "Deadlock"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid potential panic during recovery During recovery, if FAULT_BLOCK is on, it is possible that f2fs_reserve_new_block() will return -ENOSPC during recovery, then it may trigger panic. Also, if fault injection rate is 1 and only FAULT_BLOCK fault type is on, it may encounter deadloop in loop of block reservation. Let\u0027s change as below to fix these issues: - remove bug_on() to avoid panic. - limit the loop count of block reservation to avoid potential deadloop.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-27032"
    },
    {
      "cve": "CVE-2024-27065",
      "cwe": {
        "id": "CWE-1287",
        "name": "Improper Validation of Specified Type of Input"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: do not compare internal table flags on updates Restore skipping transaction if table update does not modify flags.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-27065"
    },
    {
      "cve": "CVE-2024-27074",
      "cwe": {
        "id": "CWE-772",
        "name": "Missing Release of Resource after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: media: go7007: fix a memleak in go7007_load_encoder.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-27074"
    },
    {
      "cve": "CVE-2024-28085",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "wall in util-linux through 2.40, often installed with setgid tty permissions, allows escape sequences to be sent to other users\u0027 terminals through argv. (Specifically, escape sequences received from stdin are blocked, but escape sequences received from argv are not blocked.) There may be plausible scenarios where this leads to account takeover.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.0"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-28085"
    },
    {
      "cve": "CVE-2024-28182",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nghttp2 is an implementation of the Hypertext Transfer Protocol version 2 in C. The nghttp2 library prior to version 1.61.0 keeps reading the unbounded number of HTTP/2 CONTINUATION frames even after a stream is reset to keep HPACK context in sync.  This causes excessive CPU usage to decode HPACK stream. nghttp2 v1.61.0 mitigates this vulnerability by limiting the number of CONTINUATION frames it accepts per stream. There is no workaround for this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-28182"
    },
    {
      "cve": "CVE-2024-28757",
      "cwe": {
        "id": "CWE-776",
        "name": "Improper Restriction of Recursive Entity References in DTDs (\u0027XML Entity Expansion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libexpat through 2.6.1 allows an XML Entity Expansion attack when there is isolated use of external parsers (created via XML_ExternalEntityParserCreate).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-28757"
    },
    {
      "cve": "CVE-2024-28834",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in GnuTLS. The Minerva attack is a cryptographic vulnerability that exploits deterministic behavior in systems like GnuTLS, leading to side-channel leaks. In specific scenarios, such as when using the GNUTLS_PRIVKEY_FLAG_REPRODUCIBLE flag, it can result in a noticeable step in nonce size from 513 to 512 bits, exposing a potential timing side-channel.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-28834"
    },
    {
      "cve": "CVE-2024-28835",
      "cwe": {
        "id": "CWE-248",
        "name": "Uncaught Exception"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw has been discovered in GnuTLS where an application crash can be induced when attempting to verify a specially crafted .pem bundle using the \"certtool --verify-chain\" command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.0,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:R/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-28835"
    },
    {
      "cve": "CVE-2024-33599",
      "cwe": {
        "id": "CWE-121",
        "name": "Stack-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nscd: Stack-based buffer overflow in netgroup cache\r\n\r\nIf the Name Service Cache Daemon\u0027s (nscd) fixed size cache is exhausted\r\nby client requests then a subsequent client request for netgroup data\r\nmay result in a stack-based buffer overflow.  This flaw was introduced\r\nin glibc 2.15 when the cache was added to nscd.\r\n\r\nThis vulnerability is only present in the nscd binary.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.6,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-33599"
    },
    {
      "cve": "CVE-2024-33600",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nscd: Null pointer crashes after notfound response\r\n\r\nIf the Name Service Cache Daemon\u0027s (nscd) cache fails to add a not-found\r\nnetgroup response to the cache, the client request can result in a null\r\npointer dereference.  This flaw was introduced in glibc 2.15 when the\r\ncache was added to nscd.\r\n\r\nThis vulnerability is only present in the nscd binary.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-33600"
    },
    {
      "cve": "CVE-2024-33601",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nscd: netgroup cache may terminate daemon on memory allocation failure\r\n\r\nThe Name Service Cache Daemon\u0027s (nscd) netgroup cache uses xmalloc or\r\nxrealloc and these functions may terminate the process due to a memory\r\nallocation failure resulting in a denial of service to the clients.  The\r\nflaw was introduced in glibc 2.15 when the cache was added to nscd.\r\n\r\nThis vulnerability is only present in the nscd binary.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.0,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-33601"
    },
    {
      "cve": "CVE-2024-33602",
      "cwe": {
        "id": "CWE-466",
        "name": "Return of Pointer Value Outside of Expected Range"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nscd: netgroup cache assumes NSS callback uses in-buffer strings\r\n\r\nThe Name Service Cache Daemon\u0027s (nscd) netgroup cache can corrupt memory\r\nwhen the NSS callback does not store all strings in the provided buffer.\r\nThe flaw was introduced in glibc 2.15 when the cache was added to nscd.\r\n\r\nThis vulnerability is only present in the nscd binary.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.0,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-33602"
    },
    {
      "cve": "CVE-2024-33621",
      "cwe": {
        "id": "CWE-1287",
        "name": "Improper Validation of Specified Type of Input"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: ipvlan: Dont Use skb-\u003esk in ipvlan_process_v4 / 6_outbound.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-33621"
    },
    {
      "cve": "CVE-2024-34459",
      "cwe": {
        "id": "CWE-126",
        "name": "Buffer Over-read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in xmllint (from libxml2) before 2.11.8 and 2.12.x before 2.12.7. Formatting error messages with xmllint --htmlout can result in a buffer over-read in xmlHTMLPrintFileContext in xmllint.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-34459"
    },
    {
      "cve": "CVE-2024-35807",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: ext4: fix corruption during on-line resize.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-35807"
    },
    {
      "cve": "CVE-2024-35809",
      "cwe": {
        "id": "CWE-1287",
        "name": "Improper Validation of Specified Type of Input"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: PCI/PM: Drain runtime-idle callbacks before driver removal.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-35809"
    },
    {
      "cve": "CVE-2024-35830",
      "cwe": {
        "id": "CWE-665",
        "name": "Improper Initialization"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: media: tc358743: register v4l2 async device only after successful setup Ensure the device has been setup correctly before registering the v4l2 async device, thus allowing userspace to access.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-35830"
    },
    {
      "cve": "CVE-2024-35888",
      "cwe": {
        "id": "CWE-457",
        "name": "Use of Uninitialized Variable"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: erspan: make sure erspan_base_hdr is present in skb-\u003ehead.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-35888"
    },
    {
      "cve": "CVE-2024-35910",
      "cwe": {
        "id": "CWE-665",
        "name": "Improper Initialization"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: tcp: properly terminate timers for kernel sockets We had various syzbot reports about tcp timers firing after the corresponding netns has been dismantled. Fortunately Josef Bacik could trigger the issue more often, and could test a patch I wrote two years ago. When TCP sockets are closed, we call inet_csk_clear_xmit_timers() to \u0027stop\u0027 the timers. inet_csk_clear_xmit_timers() can be called from any context, including when socket lock is held. This is the reason it uses sk_stop_timer(), aka del_timer(). This means that ongoing timers might finish much later. For user sockets, this is fine because each running timer holds a reference on the socket, and the user socket holds a reference on the netns. For kernel sockets, we risk that the netns is freed before timer can complete, because kernel sockets do not hold reference on the netns. This patch adds inet_csk_clear_xmit_timers_sync() function that using sk_stop_timer_sync() to make sure all timers are terminated before the kernel socket is released. Modules using kernel sockets close them in their netns exit() handler. Also add sock_not_owned_by_me() helper to get LOCKDEP support : inet_csk_clear_xmit_timers_sync() must not be called while socket lock is held. It is very possible we can revert in the future commit 3a58f13a881e (\"net: rds: acquire refcount on TCP sockets\") which attempted to solve the issue in rds only. (net/smc/af_smc.c and net/mptcp/subflow.c have similar code) We probably can remove the check_net() tests from tcp_out_of_resources() and __tcp_close() in the future.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.8,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:L/I:L/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-35910"
    },
    {
      "cve": "CVE-2024-35925",
      "cwe": {
        "id": "CWE-369",
        "name": "Divide By Zero"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: block: prevent division by zero in blk_rq_stat_sum() The expression dst-\u003enr_samples + src-\u003enr_samples may have zero value on overflow. It is necessary to add a check to avoid division by zero. Found by Linux Verification Center (linuxtesting.org) with Svace.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-35925"
    },
    {
      "cve": "CVE-2024-35944",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: VMCI: Fix memcpy() run-time warning in dg_dispatch_as_host().",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-35944"
    },
    {
      "cve": "CVE-2024-36017",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: rtnetlink: Correct nested IFLA_VF_VLAN_LIST attribute validation Each attribute inside a nested IFLA_VF_VLAN_LIST is assumed to be a struct ifla_vf_vlan_info so the size of such attribute needs to be at least of sizeof(struct ifla_vf_vlan_info) which is 14 bytes. The current size validation in do_setvfinfo is against NLA_HDRLEN (4 bytes) which is less than sizeof(struct ifla_vf_vlan_info) so this validation is not enough and a too small attribute might be cast to a struct ifla_vf_vlan_info, this might result in an out of bands read access when accessing the saved (casted) entry in ivvl.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-36017"
    },
    {
      "cve": "CVE-2024-36286",
      "cwe": {
        "id": "CWE-1287",
        "name": "Improper Validation of Specified Type of Input"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_queue: acquire rcu_read_lock() in instance_destroy_rcu().",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-36286"
    },
    {
      "cve": "CVE-2024-36484",
      "cwe": {
        "id": "CWE-99",
        "name": "Improper Control of Resource Identifiers (\u0027Resource Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: net: relax socket state check at accept time.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-36484"
    },
    {
      "cve": "CVE-2024-36904",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: tcp: Use refcount_inc_not_zero() in tcp_twsk_unique().",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-36904"
    },
    {
      "cve": "CVE-2024-36905",
      "cwe": {
        "id": "CWE-369",
        "name": "Divide By Zero"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: tcp: defer shutdown(SEND_SHUTDOWN) for TCP_SYN_RECV sockets.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-36905"
    },
    {
      "cve": "CVE-2024-36934",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: bna: ensure the copied buf is NUL terminated Currently, we allocate a nbytes-sized kernel buffer and copy nbytes from userspace to that buffer. Later, we use sscanf on this buffer but we don\u0027t ensure that the string is terminated inside the buffer, this can lead to OOB read when using sscanf. Fix this issue by using memdup_user_nul instead of memdup_user.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-36934"
    },
    {
      "cve": "CVE-2024-37356",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: tcp: Fix shift-out-of-bounds in dctcp_update_alpha().",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.6,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-37356"
    },
    {
      "cve": "CVE-2024-37370",
      "cwe": {
        "id": "CWE-130",
        "name": "Improper Handling of Length Parameter Inconsistency"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In MIT Kerberos 5 (aka krb5) before 1.21.3, an attacker can modify the plaintext Extra Count field of a confidential GSS krb5 wrap token, causing the unwrapped token to appear truncated to the application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-37370"
    },
    {
      "cve": "CVE-2024-37371",
      "cwe": {
        "id": "CWE-130",
        "name": "Improper Handling of Length Parameter Inconsistency"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In MIT Kerberos 5 (aka krb5) before 1.21.3, an attacker can cause invalid memory reads during GSS message token handling by sending message tokens with invalid length fields.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-37371"
    },
    {
      "cve": "CVE-2024-38596",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: af_unix: Fix data races in unix_release_sock/unix_stream_sendmsg.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-38596"
    },
    {
      "cve": "CVE-2024-38598",
      "cwe": {
        "id": "CWE-667",
        "name": "Improper Locking"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: md: fix resync softlockup when bitmap size is less than array size.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-38598"
    },
    {
      "cve": "CVE-2024-38612",
      "cwe": {
        "id": "CWE-459",
        "name": "Incomplete Cleanup"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: ipv6: sr: fix invalid unregister error path The error path of seg6_init() is wrong in case CONFIG_IPV6_SEG6_LWTUNNEL is not defined. In that case if seg6_hmac_init() fails, the genl_unregister_family() isn\u0027t called. This issue exist since commit 46738b1317e1 (\"ipv6: sr: add option to control lwtunnel support\"), and commit 5559cea2d5aa (\"ipv6: sr: fix possible use-after-free and null-ptr-deref\") replaced unregister_pernet_subsys() with genl_unregister_family() in this error path.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-38612"
    },
    {
      "cve": "CVE-2024-38621",
      "cwe": {
        "id": "CWE-121",
        "name": "Stack-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: media: stk1160: fix bounds checking in stk1160_copy_video() The subtract in this condition is reversed. The -\u003elength is the length of the buffer. The -\u003ebytesused is how many bytes we have copied thus far. When the condition is reversed that means the result of the subtraction is always negative but since it\u0027s unsigned then the result is a very high positive value. That means the overflow check is never true. Additionally, the -\u003ebytesused doesn\u0027t actually work for this purpose because we\u0027re not writing to \"buf-\u003emem + buf-\u003ebytesused\". Instead, the math to calculate the destination where we are writing is a bit involved. You calculate the number of full lines already written, multiply by two, skip a line if necessary so that we start on an odd numbered line, and add the offset into the line. To fix this buffer overflow, just take the actual destination where we are writing, if the offset is already out of bounds print an error and return. Otherwise, write up to buf-\u003elength bytes.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-38621"
    },
    {
      "cve": "CVE-2024-38780",
      "cwe": {
        "id": "CWE-667",
        "name": "Improper Locking"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: dma-buf/sw-sync: don\u0027t enable IRQ from sync_print_obj().",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-38780"
    },
    {
      "cve": "CVE-2024-39292",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: um: Add winch to winch_handlers before registering winch IRQ Registering a winch IRQ is racy, an interrupt may occur before the winch is added to the winch_handlers list. If that happens, register_winch_irq() adds to that list a winch that is scheduled to be (or has already been) freed, causing a panic later in winch_cleanup(). Avoid the race by adding the winch to the winch_handlers list before registering the IRQ, and rolling back if um_request_irq() fails.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-39292"
    },
    {
      "cve": "CVE-2024-39469",
      "cwe": {
        "id": "CWE-1050",
        "name": "Excessive Platform Resource Consumption within a Loop"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix nilfs_empty_dir() misjudgment and long loop on I/O errors The error handling in nilfs_empty_dir() when a directory folio/page read fails is incorrect, as in the old ext2 implementation, and if the folio/page cannot be read or nilfs_check_folio() fails, it will falsely determine the directory as empty and corrupt the file system. In addition, since nilfs_empty_dir() does not immediately return on a failed folio/page read, but continues to loop, this can cause a long loop with I/O if i_size of the directory\u0027s inode is also corrupted, causing the log writer thread to wait and hang, as reported by syzbot. Fix these issues by making nilfs_empty_dir() immediately return a false value (0) if it fails to get a directory folio/page.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-39469"
    },
    {
      "cve": "CVE-2024-39487",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: bonding: Fix out-of-bounds read in bond_option_arp_ip_targets_set().",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-39487"
    },
    {
      "cve": "CVE-2024-39489",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: ipv6: sr: fix memleak in seg6_hmac_init_algo seg6_hmac_init_algo returns without cleaning up the previous allocations if one fails, so it\u0027s going to leak all that memory and the crypto tfms. Update seg6_hmac_exit to only free the memory when allocated, so we can reuse the code directly.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-39489"
    },
    {
      "cve": "CVE-2024-40901",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Avoid test/set_bit() operating in non-allocated memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-40901"
    },
    {
      "cve": "CVE-2024-40959",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: xfrm6: check ip6_dst_idev() return value in xfrm6_get_saddr().",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-40959"
    },
    {
      "cve": "CVE-2024-41046",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: net: ethernet: lantiq_etop: fix double free in detach The number of the currently released descriptor is never incremented which results in the same skb being released multiple times.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-41046"
    },
    {
      "cve": "CVE-2024-42070",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: fully validate NFT_DATA_VALUE on store to data registers register store validation for NFT_DATA_VALUE is conditional, however, the datatype is always either NFT_DATA_VALUE or NFT_DATA_VERDICT. This only requires a new helper function to infer the register type from the set datatype so this conditional check can be removed. Otherwise, pointer to chain object can be leaked through the registers.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-42070"
    },
    {
      "cve": "CVE-2024-42096",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: x86: stop playing stack games in profile_pc().",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:L/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-42096"
    },
    {
      "cve": "CVE-2024-42106",
      "cwe": {
        "id": "CWE-908",
        "name": "Use of Uninitialized Resource"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: inet_diag: Initialize pad field in struct inet_diag_req_v2.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-42106"
    },
    {
      "cve": "CVE-2024-42131",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: mm: avoid overflows in dirty throttling logic The dirty throttling logic is interspersed with assumptions that dirty limits in PAGE_SIZE units fit into 32-bit (so that various multiplications fit into 64-bits). If limits end up being larger, we will hit overflows, possible divisions by 0 etc. Fix these problems by never allowing so large dirty limits as they have dubious practical value anyway. For dirty_bytes / dirty_background_bytes interfaces we can just refuse to set so large limits. For dirty_ratio / dirty_background_ratio it isn\u0027t so simple as the dirty limit is computed from the amount of available memory which can change due to memory hotplug etc. So when converting dirty limits from ratios to numbers of pages, we just don\u0027t allow the result to exceed UINT_MAX. This is root-only triggerable problem which occurs when the operator sets dirty limits to \u003e16 TB.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-42131"
    },
    {
      "cve": "CVE-2024-42154",
      "cwe": {
        "id": "CWE-805",
        "name": "Buffer Access with Incorrect Length Value"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: tcp_metrics: validate source addr length I don\u0027t see anything checking that TCP_METRICS_ATTR_SADDR_IPV4 is at least 4 bytes long, and the policy doesn\u0027t have an entry for this attribute at all (neither does it for IPv6 but v6 is manually validated).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-42154"
    },
    {
      "cve": "CVE-2024-43871",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: devres: Fix memory leakage caused by driver API devm_free_percpu() It will cause memory leakage when use driver API devm_free_percpu() to free memory allocated by devm_alloc_percpu(), fixed by using devres_release() instead of devres_destroy() within devm_free_percpu().",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-43871"
    },
    {
      "cve": "CVE-2024-44944",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: use helper function to calculate expect ID Delete expectation path is missing a call to the nf_expect_get_id() helper function to calculate the expectation ID, otherwise LSB of the expectation object address is leaked to userspace.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-44944"
    },
    {
      "cve": "CVE-2024-44965",
      "cwe": {
        "id": "CWE-229",
        "name": "Improper Handling of Values"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: x86/mm: Fix pti_clone_pgtable() alignment assumption Guenter reported dodgy crashes on an i386-nosmp build using GCC-11 that had the form of endless traps until entry stack exhaust and then #DF from the stack guard. It turned out that pti_clone_pgtable() had alignment assumptions on the start address, notably it hard assumes start is PMD aligned. This is true on x86_64, but very much not true on i386. These assumptions can cause the end condition to malfunction, leading to a \u0027short\u0027 clone. Guess what happens when the user mapping has a short copy of the entry text? Use the correct increment form for addr to avoid alignment assumptions.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-44965"
    },
    {
      "cve": "CVE-2024-45490",
      "cwe": {
        "id": "CWE-131",
        "name": "Incorrect Calculation of Buffer Size"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libexpat before 2.6.3. xmlparse.c does not reject a negative length for XML_ParseBuffer.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-45490"
    },
    {
      "cve": "CVE-2024-45491",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libexpat before 2.6.3. dtdCopy in xmlparse.c can have an integer overflow for nDefaultAtts on 32-bit platforms (where UINT_MAX equals SIZE_MAX).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.3,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-45491"
    },
    {
      "cve": "CVE-2024-45492",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libexpat before 2.6.3. nextScaffoldPart in xmlparse.c can have an integer overflow for m_groupSize on 32-bit platforms (where UINT_MAX equals SIZE_MAX).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.3,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-45492"
    },
    {
      "cve": "CVE-2024-46743",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: of/irq: Prevent device address out-of-bounds read in interrupt map walk.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-46743"
    },
    {
      "cve": "CVE-2024-46745",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: Input: uinput - reject requests with unreasonable number of slots When exercising uinput interface syzkaller may try setting up device with a really large number of slots, which causes memory allocation failure in input_mt_init_slots(). While this allocation failure is handled properly and request is rejected, it results in syzkaller reports. Additionally, such request may put undue burden on the system which will try to free a lot of memory for a bogus request. Fix it by limiting allowed number of slots to 100. This can easily be extended if we see devices that can track more than 100 contacts.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-46745"
    },
    {
      "cve": "CVE-2024-46750",
      "cwe": {
        "id": "CWE-413",
        "name": "Improper Resource Locking"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: PCI: Add missing bridge lock to pci_bus_lock().",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-46750"
    },
    {
      "cve": "CVE-2024-47684",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: tcp: check skb is non-NULL in tcp_rto_delta_us().",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-47684"
    },
    {
      "cve": "CVE-2024-47701",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: ext4: avoid OOB when system.data xattr changes underneath the filesystem.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-47701"
    },
    {
      "cve": "CVE-2024-47707",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ipv6: A NULL dereference vulnerability may occur in rt6_uncached_list_flush_dev() due to the necessary check being removed by a previous commit.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-47707"
    },
    {
      "cve": "CVE-2024-47737",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: nfsd: call cache_put if xdr_reserve_space returns NULL.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-47737"
    },
    {
      "cve": "CVE-2024-48881",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "bcache: revert replacing IS_ERR_OR_NULL with IS_ERR again.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-48881"
    },
    {
      "cve": "CVE-2024-49881",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: ext4: update orig_path in ext4_find_extent().",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-49881"
    },
    {
      "cve": "CVE-2024-49884",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: ext4: fix slab-use-after-free in ext4_split_extent_at().",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-49884"
    },
    {
      "cve": "CVE-2024-49948",
      "cwe": {
        "id": "CWE-124",
        "name": "Buffer Underwrite (\u0027Buffer Underflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: net: add more sanity checks to qdisc_pkt_len_init().",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-49948"
    },
    {
      "cve": "CVE-2024-49949",
      "cwe": {
        "id": "CWE-124",
        "name": "Buffer Underwrite (\u0027Buffer Underflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: net: avoid potential underflow in qdisc_pkt_len_init() with UFO.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-49949"
    },
    {
      "cve": "CVE-2024-49952",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: prevent nf_skb_duplicated corruption.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-49952"
    },
    {
      "cve": "CVE-2024-49982",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: aoe: fix the potential use-after-free problem in more places For fixing CVE-2023-6270, f98364e92662 (\"aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts\") makes tx() calling dev_put() instead of doing in aoecmd_cfg_pkts(). It avoids that the tx() runs into use-after-free. Then Nicolai Stange found more places in aoe have potential use-after-free problem with tx(). e.g. revalidate(), aoecmd_ata_rw(), resend(), probe() and aoecmd_cfg_rsp(). Those functions also use aoenet_xmit() to push packet to tx queue. So they should also use dev_hold() to increase the refcnt of skb-\u003edev. On the other hand, moving dev_put() to tx() causes that the refcnt of skb-\u003edev be reduced to a negative value, because corresponding dev_hold() are not called in revalidate(), aoecmd_ata_rw(), resend(), probe(), and aoecmd_cfg_rsp(). This patch fixed this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-49982"
    },
    {
      "cve": "CVE-2024-49997",
      "cwe": {
        "id": "CWE-226",
        "name": "Sensitive Information in Resource Not Removed Before Reuse"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: net: ethernet: lantiq_etop: fix memory disclosure When applying padding, the buffer is not zeroed, which results in memory disclosure. The mentioned data is observed on the wire. This patch uses skb_put_padto() to pad Ethernet frames properly. The mentioned function zeroes the expanded buffer. In case the packet cannot be padded it is silently dropped. Statistics are also not incremented. This driver does not support statistics in the old 32-bit format or the new 64-bit format. These will be added in the future. In its current form, the patch should be easily backported to stable versions. Ethernet MACs on Amazon-SE and Danube cannot do padding of the packets in hardware, so software padding must be applied.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-49997"
    },
    {
      "cve": "CVE-2024-50006",
      "cwe": {
        "id": "CWE-833",
        "name": "Deadlock"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: ext4: fix i_data_sem unlock order in ext4_ind_migrate().",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-50006"
    },
    {
      "cve": "CVE-2024-50040",
      "cwe": {
        "id": "CWE-390",
        "name": "Detection of Error Condition Without Action"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: igb: Do not bring the device up after non-fatal error.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.2,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-50040"
    },
    {
      "cve": "CVE-2024-50045",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: netfilter: br_netfilter: fix panic with metadata_dst skb.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-50045"
    },
    {
      "cve": "CVE-2024-50251",
      "cwe": {
        "id": "CWE-131",
        "name": "Incorrect Calculation of Buffer Size"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_payload: sanitize offset and length before calling skb_checksum() If access to offset + length is larger than the skbuff length, then skb_checksum() triggers BUG_ON(). skb_checksum() internally subtracts the length parameter while iterating over skbuff, BUG_ON(len) at the end of it checks that the expected length to be included in the checksum calculation is fully consumed.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-50251"
    },
    {
      "cve": "CVE-2024-50262",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: bpf: Fix out-of-bounds write in trie_get_next_key().",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-50262"
    },
    {
      "cve": "CVE-2024-50299",
      "cwe": {
        "id": "CWE-131",
        "name": "Incorrect Calculation of Buffer Size"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: sctp: properly validate chunk size in sctp_sf_ootb()",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-50299"
    },
    {
      "cve": "CVE-2024-50301",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: security/keys: fix slab-out-of-bounds in key_task_permission.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-50301"
    },
    {
      "cve": "CVE-2024-50602",
      "cwe": {
        "id": "CWE-754",
        "name": "Improper Check for Unusual or Exceptional Conditions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libexpat before 2.6.4. There is a crash within the XML_ResumeParser function because XML_StopParser can stop/suspend an unstarted parser.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-50602"
    },
    {
      "cve": "CVE-2024-52332",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "igb: Fix potential invalid memory access in igb_init_module() The pci_register_driver() can fail and when this happened, the dca_notifier needs to be unregistered, otherwise the dca_notifier can be called when igb fails to install, resulting to invalid memory access.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-52332"
    },
    {
      "cve": "CVE-2024-52533",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "gio/gsocks4aproxy.c in GNOME GLib before 2.82.1 has an off-by-one error and resultant buffer overflow because SOCKS4_CONN_MSG_LEN is not sufficient for a trailing \u0027\\\\0\u0027 character.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:L/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-52533"
    },
    {
      "cve": "CVE-2024-53057",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: net/sched: stop qdisc_tree_reduce_backlog on TC_H_ROOT.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-53057"
    },
    {
      "cve": "CVE-2024-53124",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "net: fix data-races around sk sk_forward_alloc.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-53124"
    },
    {
      "cve": "CVE-2024-53140",
      "cwe": {
        "id": "CWE-755",
        "name": "Improper Handling of Exceptional Conditions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: netlink: terminate outstanding dump on socket close Netlink supports iterative dumping of data. It provides the families the following ops: - start - (optional) kicks off the dumping process - dump - actual dump helper, keeps getting called until it returns 0 - done - (optional) pairs with .start, can be used for cleanup The whole process is asynchronous and the repeated calls to .dump don\u0027t actually happen in a tight loop, but rather are triggered in response to recvmsg() on the socket. This gives the user full control over the dump, but also means that the user can close the socket without getting to the end of the dump. To make sure .start is always paired with .done we check if there is an ongoing dump before freeing the socket, and if so call .done. The complication is that sockets can get freed from BH and .done is allowed to sleep. So we use a workqueue to defer the call, when needed. Unfortunately this does not work correctly. What we defer is not the cleanup but rather releasing a reference on the socket. We have no guarantee that we own the last reference, if someone else holds the socket they may release it in BH and we\u0027re back to square one. The whole dance, however, appears to be unnecessary. Only the user can interact with dumps, so we can clean up when socket is closed. And close always happens in process context. Some async code may still access the socket after close, queue notification skbs to it etc. but no dumps can start, end or otherwise make progress. Delete the workqueue and flush the dump state directly from the release handler. Note that further cleanup is possible in -next, for instance we now always call .done before releasing the main module reference, so dump doesn\u0027t have to take a reference of its own.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-53140"
    },
    {
      "cve": "CVE-2024-53164",
      "cwe": {
        "id": "CWE-459",
        "name": "Incomplete Cleanup"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: net: sched: fix ordering of qlen adjustment Changes to sch-\u003eq.qlen around qdisc_tree_reduce_backlog() need to happen _before_ a call to said function because otherwise it may fail to notify parent qdiscs when the child is about to become empty.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-53164"
    },
    {
      "cve": "CVE-2024-53165",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: sh: intc: Fix use-after-free bug in register_intc_controller() In the error handling for this function, d is freed without ever removing it from intc_list which would lead to a use after free. To fix this, let\u0027s only add it to the list after everything has succeeded.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-53165"
    },
    {
      "cve": "CVE-2024-53217",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: NFSD: Prevent NULL dereference in nfsd4_process_cb_update().",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-53217"
    },
    {
      "cve": "CVE-2024-56433",
      "cwe": {
        "id": "CWE-1188",
        "name": "Initialization of a Resource with an Insecure Default"
      },
      "notes": [
        {
          "category": "summary",
          "text": "shadow-utils (aka shadow) 4.4 through 4.17.0 establishes a default /etc/subuid behavior (e.g., uid 100000 through 165535 for the first user account) that can realistically conflict with the uids of users defined on locally administered networks, potentially leading to account takeover, e.g., by leveraging newuidmap for access to an NFS home directory (or same-host resources in the case of remote logins by these local network users). NOTE: it may also be argued that system administrators should not have assigned uids, within local networks, that are within the range that can occur in /etc/subuid.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.6,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:L/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-56433"
    },
    {
      "cve": "CVE-2024-56569",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ftrace: Fix regression with module command in stack_trace_filter When executing the following command: # echo \"write*:mod:ext3\" \u003e /sys/kernel/tracing/stack_trace_filter The current mod command causes a null pointer dereference. While commit 0f17976568b3f (\"ftrace: Fix regression with module command in stack_trace_filter\") has addressed part of the issue, it left a corner case unhandled, which still results in a kernel crash.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-56569"
    },
    {
      "cve": "CVE-2024-56570",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: ovl: Filter invalid inodes with missing lookup function Add a check to the ovl_dentry_weird() function to prevent the processing of directory inodes that lack the lookup function.This is important because such inodes can cause errors in overlayfs when passed to the lowerstack.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-56570"
    },
    {
      "cve": "CVE-2024-56600",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "net: inet6: do not leave a dangling sk pointer in inet6_create() sock_init_data() attaches the allocated sk pointer to the provided sock object. If inet6_create() fails later, the sk object is released, but the sock object retains the dangling sk pointer, which may cause use-after-free later. Clear the sock sk pointer on error.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-56600"
    },
    {
      "cve": "CVE-2024-56601",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: net: inet: do not leave a dangling sk pointer in inet_create() sock_init_data() attaches the allocated sk object to the provided sock object. If inet_create() fails later, the sk object is freed, but the sock object retains the dangling pointer, which may create use-after-free later. Clear the sk pointer in the sock object on error.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-56601"
    },
    {
      "cve": "CVE-2024-56606",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "af_packet: avoid erroring out after sock_init_data() in packet_create() After sock_init_data() the allocated sk object is attached to the provided sock object. On error, packet_create() frees the sk object leaving the dangling pointer in the sock object on return. Some other code may try to use this pointer and cause use-after-free.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-56606"
    },
    {
      "cve": "CVE-2024-56644",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: net/ipv6: release expired exception dst cached in socket Dst objects get leaked in ip6_negative_advice() when this function is executed for an expired IPv6 route located in the exception table.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-56644"
    },
    {
      "cve": "CVE-2024-56650",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: netfilter: x_tables: fix LED ID check in led_tg_check() Syzbot has reported the following BUG detected by KASAN",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-56650"
    },
    {
      "cve": "CVE-2024-56770",
      "cwe": {
        "id": "CWE-670",
        "name": "Always-Incorrect Control Flow Implementation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "net/sched: netem: The interface fully stops transferring packets and \"locks\". In this case, the child qdisc and tfifo are empty, but \u0027qlen\u0027 indicates the tfifo is at its limit and no more packets are accepted.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-56770"
    },
    {
      "cve": "CVE-2024-56779",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nfsd: fix nfs4_openowner leak when concurrent nfsd4_open occur\r\n\r\nThe action force umount(umount -f) will attempt to kill all rpc_task even\r\numount operation may ultimately fail if some files remain open.\r\nConsequently, if an action attempts to open a file, it can potentially\r\nsend two rpc_task to nfs server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-56779"
    },
    {
      "cve": "CVE-2024-56780",
      "cwe": {
        "id": "CWE-833",
        "name": "Deadlock"
      },
      "notes": [
        {
          "category": "summary",
          "text": "quota: flush quota_release_work upon quota writeback One of the paths quota writeback is called from is: freeze_super() sync_filesystem() ext4_sync_fs() dquot_writeback_dquots().",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-56780"
    },
    {
      "cve": "CVE-2024-57884",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "mm: vmscan: account for free pages to prevent infinite Loop in throttle_direct_reclaim()\r\n\r\nThe task sometimes continues looping in throttle_direct_reclaim() because\r\nallow_direct_reclaim(pgdat) keeps returning false.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-57884"
    },
    {
      "cve": "CVE-2024-57901",
      "cwe": {
        "id": "CWE-664",
        "name": "Improper Control of a Resource Through its Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "af_packet: vlan_get_protocol_dgram() vs MSG_PEEK Blamed allowing a crash.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-57901"
    },
    {
      "cve": "CVE-2025-0167",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When asked to use a .netrc file for credentials and to follow HTTP redirects, curl could leak the password used for the first host to the followed-to host under certain circumstances. This flaw only manifests itself if the netrc file has a default entry that omits both login and password. A rare circumstance.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.4,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:C/C:L/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2025-0167"
    },
    {
      "cve": "CVE-2025-0395",
      "cwe": {
        "id": "CWE-131",
        "name": "Incorrect Calculation of Buffer Size"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When the assert() function in the GNU C Library versions 2.13 to 2.40 fails, it does not allocate enough space for the assertion failure message string and size information, which may lead to a buffer overflow if the message string size aligns to page size.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2025-0395"
    },
    {
      "cve": "CVE-2025-0665",
      "cwe": {
        "id": "CWE-1341",
        "name": "Multiple Releases of Same Resource or Handle"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl would wrongly close the same eventfd file descriptor twice when taking down a connection channel after having completed a threaded name resolve.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.3,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2025-0665"
    },
    {
      "cve": "CVE-2025-0725",
      "cwe": {
        "id": "CWE-680",
        "name": "Integer Overflow to Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When libcurl is asked to perform automatic gzip decompression of content-encoded HTTP responses with the CURLOPT_ACCEPT_ENCODING option, using zlib 1.2.0.3 or older, an attacker-controlled integer overflow would make libcurl perform a buffer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.3,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2025-0725"
    },
    {
      "cve": "CVE-2025-1390",
      "cwe": {
        "id": "CWE-284",
        "name": "Improper Access Control"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The PAM module pam_cap.so of libcap configuration supports group names starting with \u201c@\u201d, during actual parsing, configurations not starting with \u201c@\u201d are incorrectly recognized as group names. This may result in nonintended users being granted an inherited capability set, potentially leading to security risks. Attackers can exploit this vulnerability to achieve local privilege escalation on systems where /etc/security/capability.conf is used to configure user inherited privileges by constructing specific usernames.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:H/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2025-1390"
    },
    {
      "cve": "CVE-2025-3277",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "1. Describe what is the vulnerability about, e.g.:\n    Affected devices do not properly validate input in the hack-me endpoint of the web service.\n\n    2. Describe what an attacker could do with it - e.g.:\n    This could allow an unauthenticated remote attacker to execute arbitrary code on the device.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 0.0,
            "baseSeverity": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:N/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2025-3277"
    },
    {
      "cve": "CVE-2025-3360",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "1. Describe what is the vulnerability about, e.g.:\n    Affected devices do not properly validate input in the hack-me endpoint of the web service.\n\n    2. Describe what an attacker could do with it - e.g.:\n    This could allow an unauthenticated remote attacker to execute arbitrary code on the device.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 0.0,
            "baseSeverity": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:N/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2025-3360"
    },
    {
      "cve": "CVE-2025-21694",
      "cwe": {
        "id": "CWE-667",
        "name": "Improper Locking"
      },
      "notes": [
        {
          "category": "summary",
          "text": "fs/proc: softlockup in __read_vmcore. Since commit 5cbcb62dddf5 (\"fs/proc: fix softlockup in __read_vmcore\") the number of softlockups in __read_vmcore at kdump time have gone down, but they still happen sometimes. In a memory constrained environment like the kdump image, a softlockup is not just a harmless message, but it can interfere with things like RCU freeing memory, causing the crashdump to get stuck.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2025-21694"
    },
    {
      "cve": "CVE-2025-26465",
      "cwe": {
        "id": "CWE-390",
        "name": "Detection of Error Condition Without Action"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in OpenSSH when the VerifyHostKeyDNS option is enabled. A machine-in-the-middle attack can be performed by a malicious machine impersonating a legit server. This issue occurs due to how OpenSSH mishandles error codes in specific conditions when verifying the host key. For an attack to be considered successful, the attacker needs to manage to exhaust the client\u0027s memory resource first, turning the attack complexity high.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.8,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:H/I:H/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2025-26465"
    },
    {
      "cve": "CVE-2025-26466",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the OpenSSH package. For each ping packet the SSH server receives, a pong packet is allocated in a memory buffer and stored in a queue of packages. It is only freed when the server/client key exchange has finished. A malicious client may keep sending such packages, leading to an uncontrolled increase in memory consumption on the server side. Consequently, the server may become unavailable, resulting in a denial of service attack.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2025-26466"
    },
    {
      "cve": "CVE-2025-29087",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite 3.44.0 through 3.49.0 before 3.49.1, the concat_ws() SQL function can cause memory to be written beyond the end of a malloc-allocated buffer. If the separator argument is attacker-controlled and has a large string (e.g., 2MB or more), an integer overflow occurs in calculating the size of the result buffer, and thus malloc may not allocate enough memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.2,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:N/UI:N/S:C/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2025-29087"
    },
    {
      "cve": "CVE-2025-29088",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite 3.49.0 before 3.49.1, certain argument values to sqlite3_db_config (in the C-language API) can cause a denial of service (application crash). An sz*nBig multiplication is not cast to a 64-bit integer, and consequently some memory allocations may be incorrect.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.6,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:N/UI:N/S:C/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2025-29088"
    },
    {
      "cve": "CVE-2025-32728",
      "cwe": {
        "id": "CWE-440",
        "name": "Expected Behavior Violation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In sshd in OpenSSH before 10.0, the DisableForwarding directive does not adhere to the documentation stating that it disables X11 and agent forwarding.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:C/C:N/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2025-32728"
    },
    {
      "cve": "CVE-2025-46836",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "net-tools is a collection of programs that form the base set of the NET-3 networking distribution for the Linux operating system. Inn versions up to and including 2.10, the Linux network utilities (like ifconfig) from the net-tools package do not properly validate the structure of /proc files when showing interfaces. `get_name()` in `interface.c` copies interface labels from `/proc/net/dev` into a fixed 16-byte stack buffer without bounds checking, leading to possible arbitrary code execution or crash. The known attack path does not require privilege but also does not provide privilege escalation in this scenario. A patch is available and expected to be part of version 2.20.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.5 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109478459/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.6,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2025-46836"
    }
  ]
}

{
  "document": {
    "acknowledgments": [
      {
        "organization": "Siemens ProductCERT",
        "summary": "reporting these vulnerabilities to CISA."
      }
    ],
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Disclosure is not limited",
      "tlp": {
        "label": "WHITE",
        "url": "https://us-cert.cisa.gov/tlp/"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "Siemens has released a new version for Telecontrol Server Basic that fixes multiple vulnerabilities.",
        "title": "Summary"
      },
      {
        "category": "general",
        "text": "As a general security measure, Siemens strongly recommends to protect network access to devices with appropriate mechanisms. In order to operate the devices in a protected IT environment, Siemens recommends to configure the environment according to Siemens\u0027 operational guidelines for Industrial Security (Download: \nhttps://www.siemens.com/cert/operational-guidelines-industrial-security), and to follow the recommendations in the product manuals.\nAdditional information on Industrial Security by Siemens can be found at: https://www.siemens.com/industrialsecurity",
        "title": "General Recommendations"
      },
      {
        "category": "general",
        "text": "For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories",
        "title": "Additional Resources"
      },
      {
        "category": "legal_disclaimer",
        "text": "Siemens Security Advisories are subject to the terms and conditions contained in Siemens\u0027 underlying license terms or other applicable agreements previously agreed to with Siemens (hereinafter \"License Terms\"). To the extent applicable to information, software or documentation made available in or through a Siemens Security Advisory, the Terms of Use of Siemens\u0027 Global Website (https://www.siemens.com/terms_of_use, hereinafter \"Terms of Use\"), in particular Sections 8-10 of the Terms of Use, shall apply additionally. In case of conflicts, the License Terms shall prevail over the Terms of Use.",
        "title": "Terms of Use"
      },
      {
        "category": "legal_disclaimer",
        "text": "All information products included in https://us-cert.cisa.gov/ics are provided \"as is\" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see https://us-cert.cisa.gov/tlp/.",
        "title": "Legal Notice"
      },
      {
        "category": "other",
        "text": "This CISA CSAF advisory was converted from Siemens ProductCERT\u0027s CSAF advisory.",
        "title": "Advisory Conversion Disclaimer"
      },
      {
        "category": "other",
        "text": "Multiple",
        "title": "Critical infrastructure sectors"
      },
      {
        "category": "other",
        "text": "Worldwide",
        "title": "Countries/areas deployed"
      },
      {
        "category": "other",
        "text": "Germany",
        "title": "Company headquarters location"
      },
      {
        "category": "general",
        "text": "CISA recommends users take defensive measures to minimize the exploitation risk of this vulnerability.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Minimize network exposure for all control system devices and/or systems, and ensure they are not accessible from the internet.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Locate control system networks and remote devices behind firewalls and isolate them from business networks.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "When remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most recent version available. Also recognize VPN is only as secure as its connected devices.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets. Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.",
        "title": "Recommended Practices"
      }
    ],
    "publisher": {
      "category": "other",
      "contact_details": "central@cisa.dhs.gov",
      "name": "CISA",
      "namespace": "https://www.cisa.gov/"
    },
    "references": [
      {
        "category": "self",
        "summary": "SSA-556635: Multiple Vulnerabilities in Telecontrol Server Basic before V3.1.2.0 - CSAF Version",
        "url": "https://cert-portal.siemens.com/productcert/csaf/ssa-556635.json"
      },
      {
        "category": "self",
        "summary": "SSA-556635: Multiple Vulnerabilities in Telecontrol Server Basic before V3.1.2.0 - HTML Version",
        "url": "https://cert-portal.siemens.com/productcert/html/ssa-556635.html"
      },
      {
        "category": "self",
        "summary": "SSA-556635: Multiple Vulnerabilities in Telecontrol Server Basic before V3.1.2.0 - PDF Version",
        "url": "https://cert-portal.siemens.com/productcert/pdf/ssa-556635.pdf"
      },
      {
        "category": "self",
        "summary": "SSA-556635: Multiple Vulnerabilities in Telecontrol Server Basic before V3.1.2.0 - TXT Version",
        "url": "https://cert-portal.siemens.com/productcert/txt/ssa-556635.txt"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-24-102-08 JSON",
        "url": "https://raw.githubusercontent.com/cisagov/CSAF/develop/csaf_files/OT/white/2024/icsa-24-102-08.json"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-24-102-08 - Web Version",
        "url": "https://www.cisa.gov/news-events/ics-advisories/icsa-24-102-08"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/alerts/ICS-ALERT-10-301-01"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/resources-tools/resources/ics-recommended-practices"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/topics/industrial-control-systems"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/sites/default/files/publications/Cybersecurity_Best_Practices_for_Industrial_Control_Systems.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/tips/ICS-TIP-12-146-01B"
      }
    ],
    "title": "Siemens Telecontrol Server Basic",
    "tracking": {
      "current_release_date": "2024-04-09T00:00:00.000000Z",
      "generator": {
        "engine": {
          "name": "CISA CSAF Generator",
          "version": "1.0.0"
        }
      },
      "id": "ICSA-24-102-08",
      "initial_release_date": "2024-04-09T00:00:00.000000Z",
      "revision_history": [
        {
          "date": "2024-04-09T00:00:00.000000Z",
          "legacy_version": "1.0",
          "number": "1",
          "summary": "Publication Date"
        }
      ],
      "status": "final",
      "version": "1"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV3.1.2",
                "product": {
                  "name": "TeleControl Server Basic V3",
                  "product_id": "CSAFPID-0001"
                }
              }
            ],
            "category": "product_name",
            "name": "TeleControl Server Basic V3"
          }
        ],
        "category": "vendor",
        "name": "Siemens"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2022-4304",
      "cwe": {
        "id": "CWE-326",
        "name": "Inadequate Encryption Strength"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A timing based side channel exists in the OpenSSL RSA Decryption implementation which could be sufficient to recover a plaintext across a network in a Bleichenbacher style attack. To achieve a successful decryption an attacker would have to be able to send a very large number of trial messages for decryption. The vulnerability affects all RSA padding modes: PKCS#1 v1.5, RSA-OEAP and RSASVE. For example, in a TLS connection, RSA is commonly used by a client to send an encrypted pre-master secret to the server. An attacker that had observed a genuine connection between a client and a server could use this flaw to send trial messages to the server and record the time taken to process them. After a sufficiently large number of messages the attacker could recover the pre-master secret used for the original connection and thus be able to decrypt the application data sent over that connection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-4304"
    },
    {
      "cve": "CVE-2022-4450",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The function PEM_read_bio_ex() reads a PEM file from a BIO and parses and decodes the \"name\" (e.g. \"CERTIFICATE\"), any header data and the payload data. If the function succeeds then the \"name_out\", \"header\" and \"data\" arguments are populated with pointers to buffers containing the relevant decoded data. The caller is responsible for freeing those buffers. It is possible to construct a PEM file that results in 0 bytes of payload data. In this case PEM_read_bio_ex() will return a failure code but will populate the header argument with a pointer to a buffer that has already been freed. If the caller also frees this buffer then a double free will occur. This will most likely lead to a crash. This could be exploited by an attacker who has the ability to supply malicious PEM files for parsing to achieve a denial of service attack. The functions PEM_read_bio() and PEM_read() are simple wrappers around PEM_read_bio_ex() and therefore these functions are also directly affected. These functions are also called indirectly by a number of other OpenSSL functions including PEM_X509_INFO_read_bio_ex() and SSL_CTX_use_serverinfo_file() which are also vulnerable. Some OpenSSL internal uses of these functions are not vulnerable because the caller does not free the header argument if PEM_read_bio_ex() returns a failure code. These locations include the PEM_read_bio_TYPE() functions as well as the decoders introduced in OpenSSL 3.0. The OpenSSL asn1parse command line application is also impacted by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-4450"
    },
    {
      "cve": "CVE-2022-40303",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.10.3. When parsing a multi-gigabyte XML document with the XML_PARSE_HUGE parser option enabled, several integer counters can overflow. This results in an attempt to access an array at a negative 2GB offset, typically leading to a segmentation fault.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-40303"
    },
    {
      "cve": "CVE-2022-40304",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.10.3. Certain invalid XML entity definitions can corrupt a hash table key, potentially leading to subsequent logic errors. In one case, a double-free can be provoked.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-40304"
    },
    {
      "cve": "CVE-2022-43513",
      "cwe": {
        "id": "CWE-73",
        "name": "External Control of File Name or Path"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The affected components allow to rename license files with user chosen input without authentication.\r\nThis could allow an unauthenticated remote attacker to rename and move files as SYSTEM user.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.2,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-43513"
    },
    {
      "cve": "CVE-2022-43514",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The affected component does not correctly validate the root path on folder related operations, allowing to modify files and folders outside the intended root directory.\r\nThis could allow an unauthenticated remote attacker to execute file operations of files outside of the specified root folder. Chained with CVE-2022-43513 this could allow Remote Code Execution.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.7,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-43514"
    },
    {
      "cve": "CVE-2022-44725",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "OPC Foundation Local Discovery Server (LDS) in affected products uses a hard-coded file path to a configuration file. This allows a normal user to create a malicious file that is loaded by LDS (running as a high-privilege user).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-44725"
    },
    {
      "cve": "CVE-2022-46908",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite through 3.40.0, when relying on --safe for execution of an untrusted CLI script, does not properly implement the azProhibitedFunctions protection mechanism, and instead allows UDF functions such as WRITEFILE.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.3,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2022-46908"
    },
    {
      "cve": "CVE-2023-0215",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The public API function BIO_new_NDEF is a helper function used for streaming ASN.1 data via a BIO. It is primarily used internally to OpenSSL to support the SMIME, CMS and PKCS7 streaming capabilities, but may also be called directly by end user applications. The function receives a BIO from the caller, prepends a new BIO_f_asn1 filter BIO onto the front of it to form a BIO chain, and then returns the new head of the BIO chain to the caller. Under certain conditions, for example if a CMS recipient public key is invalid, the new filter BIO is freed and the function returns a NULL result indicating a failure. However, in this case, the BIO chain is not properly cleaned up and the BIO passed by the caller still retains internal pointers to the previously freed filter BIO. If the caller then goes on to call BIO_pop() on the BIO then a use-after-free will occur. This will most likely result in a crash. This scenario occurs directly in the internal function B64_write_ASN1() which may cause BIO_new_NDEF() to be called and will subsequently call BIO_pop() on the BIO. This internal function is in turn called by the public API functions PEM_write_bio_ASN1_stream, PEM_write_bio_CMS_stream, PEM_write_bio_PKCS7_stream, SMIME_write_ASN1, SMIME_write_CMS and SMIME_write_PKCS7. Other public API functions that may be impacted by this include i2d_ASN1_bio_stream, BIO_new_CMS, BIO_new_PKCS7, i2d_CMS_bio_stream and i2d_PKCS7_bio_stream. The OpenSSL cms and smime command line applications are similarly affected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-0215"
    },
    {
      "cve": "CVE-2023-0286",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a type confusion vulnerability relating to X.400 address processing inside an X.509 GeneralName. X.400 addresses were parsed as an ASN1_STRING but the public structure definition for GENERAL_NAME incorrectly specified the type of the x400Address field as ASN1_TYPE. This field is subsequently interpreted by the OpenSSL function GENERAL_NAME_cmp as an ASN1_TYPE rather than an ASN1_STRING. When CRL checking is enabled (i.e. the application sets the X509_V_FLAG_CRL_CHECK flag), this vulnerability may allow an attacker to pass arbitrary pointers to a memcmp call, enabling them to read memory contents or enact a denial of service. In most cases, the attack requires the attacker to provide both the certificate chain and CRL, neither of which need to have a valid signature. If the attacker only controls one of these inputs, the other input must already contain an X.400 address as a CRL distribution point, which is uncommon. As such, this vulnerability is most likely to only affect applications which have implemented their own functionality for retrieving CRLs over a network.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-0286"
    },
    {
      "cve": "CVE-2023-0464",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A security vulnerability has been identified in all supported versions of OpenSSL related to the verification of X.509 certificate chains that include policy constraints. Attackers may be able to exploit this vulnerability by creating a malicious certificate chain that triggers exponential use of computational resources, leading to a denial-of-service (DoS) attack on affected systems.\r\n\r\nPolicy processing is disabled by default but can be enabled by passing the `-policy` argument to the command line utilities or by calling the `X509_VERIFY_PARAM_set1_policies()` function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-0464"
    },
    {
      "cve": "CVE-2023-0465",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Applications that use a non-default option when verifying certificates may be\r\nvulnerable to an attack from a malicious CA to circumvent certain checks.\r\n\r\nInvalid certificate policies in leaf certificates are silently ignored by\r\nOpenSSL and other certificate policy checks are skipped for that certificate.\r\nA malicious CA could use this to deliberately assert invalid certificate policies\r\nin order to circumvent policy checking on the certificate altogether.\r\n\r\nPolicy processing is disabled by default but can be enabled by passing\r\nthe `-policy` argument to the command line utilities or by calling the\r\n`X509_VERIFY_PARAM_set1_policies()` function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-0465"
    },
    {
      "cve": "CVE-2023-0466",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The function X509_VERIFY_PARAM_add0_policy() is documented to\nimplicitly enable the certificate policy check when doing certificate\nverification. However the implementation of the function does not\nenable the check which allows certificates with invalid or incorrect\npolicies to pass the certificate verification.\n\nAs suddenly enabling the policy check could break existing deployments it was\ndecided to keep the existing behavior of the X509_VERIFY_PARAM_add0_policy()\nfunction.\n\nInstead the applications that require OpenSSL to perform certificate\npolicy check need to use X509_VERIFY_PARAM_set1_policies() or explicitly\nenable the policy check by calling X509_VERIFY_PARAM_set_flags() with\nthe X509_V_FLAG_POLICY_CHECK flag argument.\n\nCertificate policy checks are disabled by default in OpenSSL and are not\ncommonly used by applications.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-0466"
    },
    {
      "cve": "CVE-2023-3446",
      "cwe": {
        "id": "CWE-1333",
        "name": "Inefficient Regular Expression Complexity"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. One of those checks confirms that the modulus (\u0027p\u0027 parameter) is not too large. Trying to use a very large modulus is slow and OpenSSL will not normally use a modulus which is over 10,000 bits in length. However the DH_check() function checks numerous aspects of the key or parameters that have been supplied. Some of those checks use the supplied modulus value even if it has already been found to be too large. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulernable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the \u0027-check\u0027 option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-3446"
    },
    {
      "cve": "CVE-2023-4807",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: The POLY1305 MAC (message authentication code) implementation contains a bug that might corrupt the internal state of applications on the Windows 64 platform when running on newer X86_64 processors supporting the AVX512-IFMA instructions. Impact summary: If in an application that uses the OpenSSL library an attacker can influence whether the POLY1305 MAC algorithm is used, the application state might be corrupted with various application dependent consequences. The POLY1305 MAC (message authentication code) implementation in OpenSSL does not save the contents of non-volatile XMM registers on Windows 64 platform when calculating the MAC of data larger than 64 bytes. Before returning to the caller all the XMM registers are set to zero rather than restoring their previous content. The vulnerable code is used only on newer x86_64 processors supporting the AVX512-IFMA instructions. The consequences of this kind of internal application state corruption can be various - from no consequences, if the calling application does not depend on the contents of non-volatile XMM registers at all, to the worst consequences, where the attacker could get complete control of the application process. However given the contents of the registers are just zeroized so the attacker cannot put arbitrary values inside, the most likely consequence, if any, would be an incorrect result of some application dependent calculations or a crash leading to a denial of service. The POLY1305 MAC algorithm is most frequently used as part of the CHACHA20-POLY1305 AEAD (authenticated encryption with associated data) algorithm. The most common usage of this AEAD cipher is with TLS protocol versions 1.2 and 1.3 and a malicious client can influence whether this AEAD cipher is used by the server. This implies that server applications using OpenSSL can be potentially impacted. However we are currently not aware of any concrete application that would be affected by this issue therefore we consider this a Low severity security issue. As a workaround the AVX512-IFMA instructions support can be disabled at runtime by setting the environment variable OPENSSL_ia32cap: OPENSSL_ia32cap=:~0x200000 The FIPS provider is not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-4807"
    },
    {
      "cve": "CVE-2023-5678",
      "cwe": {
        "id": "CWE-754",
        "name": "Improper Check for Unusual or Exceptional Conditions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Generating excessively long X9.42 DH keys or checking excessively long X9.42 DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_generate_key() to generate an X9.42 DH key may experience long delays. Likewise, applications that use DH_check_pub_key(), DH_check_pub_key_ex() or EVP_PKEY_public_check() to check an X9.42 DH key or X9.42 DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. While DH_check() performs all the necessary checks (as of CVE-2023-3817), DH_check_pub_key() doesn\u0027t make any of these checks, and is therefore vulnerable for excessively large P and Q parameters. Likewise, while DH_generate_key() performs a check for an excessively large P, it doesn\u0027t check for an excessively large Q. An application that calls DH_generate_key() or DH_check_pub_key() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. DH_generate_key() and DH_check_pub_key() are also called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_pub_key_ex(), EVP_PKEY_public_check(), and EVP_PKEY_generate(). Also vulnerable are the OpenSSL pkey command line application when using the \"-pubcheck\" option, as well as the OpenSSL genpkey command line application. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-5678"
    },
    {
      "cve": "CVE-2023-21528",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Microsoft SQL Server Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-21528"
    },
    {
      "cve": "CVE-2023-21568",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Microsoft SQL Server Integration Service (VS extension) Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.3,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-21568"
    },
    {
      "cve": "CVE-2023-21704",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Microsoft ODBC Driver for SQL Server Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-21704"
    },
    {
      "cve": "CVE-2023-21705",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Microsoft SQL Server Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-21705"
    },
    {
      "cve": "CVE-2023-21713",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Microsoft SQL Server Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-21713"
    },
    {
      "cve": "CVE-2023-21718",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Microsoft ODBC Driver for SQL Server Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-21718"
    },
    {
      "cve": "CVE-2023-23384",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Microsoft SQL Server Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.3,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-23384"
    },
    {
      "cve": "CVE-2023-28484",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libxml2 before 2.10.4, parsing of certain invalid XSD schemas can lead to a NULL pointer dereference and subsequently a segfault. This occurs in xmlSchemaFixupComplexType in xmlschemas.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-28484"
    },
    {
      "cve": "CVE-2023-29349",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Microsoft ODBC and OLE DB Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-29349"
    },
    {
      "cve": "CVE-2023-29356",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Microsoft ODBC Driver for SQL Server Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-29356"
    },
    {
      "cve": "CVE-2023-29469",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.10.4. When hashing empty dict strings in a crafted XML document, xmlDictComputeFastKey in dict.c can produce non-deterministic values, leading to various logic and memory errors, such as a double free. This behavior occurs because there is an attempt to use the first byte of an empty string, and any value is possible (not solely the \u0027\\0\u0027 value).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-29469"
    },
    {
      "cve": "CVE-2023-32025",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Microsoft ODBC Driver for SQL Server Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-32025"
    },
    {
      "cve": "CVE-2023-32026",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Microsoft ODBC Driver for SQL Server Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-32026"
    },
    {
      "cve": "CVE-2023-32027",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Microsoft ODBC Driver for SQL Server Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-32027"
    },
    {
      "cve": "CVE-2023-32028",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Microsoft SQL OLE DB Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-32028"
    },
    {
      "cve": "CVE-2023-36049",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": ".NET, .NET Framework, and Visual Studio Elevation of Privilege Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.6,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:H/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-36049"
    },
    {
      "cve": "CVE-2023-36417",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Microsoft SQL OLE DB Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-36417"
    },
    {
      "cve": "CVE-2023-36420",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Microsoft ODBC Driver for SQL Server Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-36420"
    },
    {
      "cve": "CVE-2023-36560",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ASP.NET Security Feature Bypass Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-36560"
    },
    {
      "cve": "CVE-2023-36728",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Microsoft SQL Server Denial of Service Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-36728"
    },
    {
      "cve": "CVE-2023-36730",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Microsoft ODBC Driver for SQL Server Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-36730"
    },
    {
      "cve": "CVE-2023-36785",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Microsoft ODBC Driver for SQL Server Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-36785"
    },
    {
      "cve": "CVE-2023-36788",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": ".NET Framework Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-36788"
    },
    {
      "cve": "CVE-2023-36792",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Visual Studio Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-36792"
    },
    {
      "cve": "CVE-2023-36793",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Visual Studio Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-36793"
    },
    {
      "cve": "CVE-2023-36794",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Visual Studio Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-36794"
    },
    {
      "cve": "CVE-2023-36796",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Visual Studio Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-36796"
    },
    {
      "cve": "CVE-2023-36873",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": ".NET Framework Spoofing Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-36873"
    },
    {
      "cve": "CVE-2023-36899",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ASP.NET Elevation of Privilege Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-36899"
    },
    {
      "cve": "CVE-2023-38169",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Microsoft SQL OLE DB Remote Code Execution Vulnerability",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-38169"
    },
    {
      "cve": "CVE-2023-39615",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Xmlsoft Libxml2 v2.11.0 was discovered to contain an out-of-bounds read via the xmlSAX2StartElement() function at /libxml2/SAX2.c. This vulnerability allows attackers to cause a Denial of Service (DoS) via supplying a crafted XML file. NOTE: the vendor\u0027s position is that the product does not support the legacy SAX1 interface with custom callbacks; there is a crash even without crafted input.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V3.1.2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109955177/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-39615"
    }
  ]
}

{
  "document": {
    "acknowledgments": [
      {
        "organization": "Siemens ProductCERT",
        "summary": "reporting these vulnerabilities to CISA."
      }
    ],
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Disclosure is not limited",
      "tlp": {
        "label": "WHITE",
        "url": "https://us-cert.cisa.gov/tlp/"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "SINEC INS before V1.0 SP2 Update 2 is affected by multiple vulnerabilities.\n\nSiemens has released an update for SINEC INS and recommends to update to the latest version.",
        "title": "Summary"
      },
      {
        "category": "general",
        "text": "As a general security measure, Siemens strongly recommends to protect network access to devices with appropriate mechanisms. In order to operate the devices in a protected IT environment, Siemens recommends to configure the environment according to Siemens\u0027 operational guidelines for Industrial Security (Download: \nhttps://www.siemens.com/cert/operational-guidelines-industrial-security), and to follow the recommendations in the product manuals.\nAdditional information on Industrial Security by Siemens can be found at: https://www.siemens.com/industrialsecurity",
        "title": "General Recommendations"
      },
      {
        "category": "general",
        "text": "For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories",
        "title": "Additional Resources"
      },
      {
        "category": "legal_disclaimer",
        "text": "Siemens Security Advisories are subject to the terms and conditions contained in Siemens\u0027 underlying license terms or other applicable agreements previously agreed to with Siemens (hereinafter \"License Terms\"). To the extent applicable to information, software or documentation made available in or through a Siemens Security Advisory, the Terms of Use of Siemens\u0027 Global Website (https://www.siemens.com/terms_of_use, hereinafter \"Terms of Use\"), in particular Sections 8-10 of the Terms of Use, shall apply additionally. In case of conflicts, the License Terms shall prevail over the Terms of Use.",
        "title": "Terms of Use"
      },
      {
        "category": "legal_disclaimer",
        "text": "All information products included in https://us-cert.cisa.gov/ics are provided \"as is\" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see https://us-cert.cisa.gov/tlp/.",
        "title": "Legal Notice"
      },
      {
        "category": "other",
        "text": "This CISA CSAF advisory was converted from Siemens ProductCERT\u0027s CSAF advisory.",
        "title": "Advisory Conversion Disclaimer"
      },
      {
        "category": "other",
        "text": "Multiple",
        "title": "Critical infrastructure sectors"
      },
      {
        "category": "other",
        "text": "Worldwide",
        "title": "Countries/areas deployed"
      },
      {
        "category": "other",
        "text": "Germany",
        "title": "Company headquarters location"
      },
      {
        "category": "general",
        "text": "CISA recommends users take defensive measures to minimize the exploitation risk of this vulnerability.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Minimize network exposure for all control system devices and/or systems, and ensure they are not accessible from the internet.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Locate control system networks and remote devices behind firewalls and isolate them from business networks.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "When remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most recent version available. Also recognize VPN is only as secure as its connected devices.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets. Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.",
        "title": "Recommended Practices"
      }
    ],
    "publisher": {
      "category": "other",
      "contact_details": "central@cisa.dhs.gov",
      "name": "CISA",
      "namespace": "https://www.cisa.gov/"
    },
    "references": [
      {
        "category": "self",
        "summary": "SSA-077170: Multiple Vulnerabilities in SINEC INS before V1.0 SP2 Update 2 - CSAF Version",
        "url": "https://cert-portal.siemens.com/productcert/csaf/ssa-077170.json"
      },
      {
        "category": "self",
        "summary": "SSA-077170: Multiple Vulnerabilities in SINEC INS before V1.0 SP2 Update 2 - HTML Version",
        "url": "https://cert-portal.siemens.com/productcert/html/ssa-077170.html"
      },
      {
        "category": "self",
        "summary": "SSA-077170: Multiple Vulnerabilities in SINEC INS before V1.0 SP2 Update 2 - PDF Version",
        "url": "https://cert-portal.siemens.com/productcert/pdf/ssa-077170.pdf"
      },
      {
        "category": "self",
        "summary": "SSA-077170: Multiple Vulnerabilities in SINEC INS before V1.0 SP2 Update 2 - TXT Version",
        "url": "https://cert-portal.siemens.com/productcert/txt/ssa-077170.txt"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-23-348-16 JSON",
        "url": "https://raw.githubusercontent.com/cisagov/CSAF/develop/csaf_files/OT/white/2023/icsa-23-348-16.json"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-23-348-16 - Web Version",
        "url": "https://www.cisa.gov/news-events/ics-advisories/icsa-23-348-16"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/alerts/ICS-ALERT-10-301-01"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/resources-tools/resources/ics-recommended-practices"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/topics/industrial-control-systems"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/sites/default/files/publications/Cybersecurity_Best_Practices_for_Industrial_Control_Systems.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/tips/ICS-TIP-12-146-01B"
      }
    ],
    "title": "Siemens SINEC INS",
    "tracking": {
      "current_release_date": "2023-12-12T00:00:00.000000Z",
      "generator": {
        "engine": {
          "name": "CISA CSAF Generator",
          "version": "1.0.0"
        }
      },
      "id": "ICSA-23-348-16",
      "initial_release_date": "2023-12-12T00:00:00.000000Z",
      "revision_history": [
        {
          "date": "2023-12-12T00:00:00.000000Z",
          "legacy_version": "1.0",
          "number": "1",
          "summary": "Publication Date"
        }
      ],
      "status": "final",
      "version": "1"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV1.0_SP2_Update_2",
                "product": {
                  "name": "SINEC INS",
                  "product_id": "CSAFPID-0001"
                }
              }
            ],
            "category": "product_name",
            "name": "SINEC INS"
          }
        ],
        "category": "vendor",
        "name": "Siemens"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2023-0464",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A security vulnerability has been identified in all supported versions of OpenSSL related to the verification of X.509 certificate chains that include policy constraints. Attackers may be able to exploit this vulnerability by creating a malicious certificate chain that triggers exponential use of computational resources, leading to a denial-of-service (DoS) attack on affected systems.\r\n\r\nPolicy processing is disabled by default but can be enabled by passing the `-policy` argument to the command line utilities or by calling the `X509_VERIFY_PARAM_set1_policies()` function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109825710/"
        },
        {
          "category": "workaround",
          "details": "Restrict access to application webserver for trusted users only",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-0464"
    },
    {
      "cve": "CVE-2023-27538",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl would reuse a previously created connection even when an SSH related option had been changed that should have prohibited reuse. libcurl keeps previously used connections in a connection pool for subsequent transfers to reuse if one of them matches the setup. However, two SSH settings were left out from the configuration match checks, making them match too easily.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109825710/"
        },
        {
          "category": "workaround",
          "details": "Restrict access to application webserver for trusted users only",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-27538"
    },
    {
      "cve": "CVE-2023-48427",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Affected products do not properly validate the certificate of the configured UMC server. This could allow an attacker to intercept credentials that are sent to the UMC server as well as to manipulate responses, potentially allowing an attacker to escalate privileges.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109825710/"
        },
        {
          "category": "workaround",
          "details": "Restrict access to application webserver for trusted users only",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-48427"
    },
    {
      "cve": "CVE-2023-48428",
      "cwe": {
        "id": "CWE-78",
        "name": "Improper Neutralization of Special Elements used in an OS Command (\u0027OS Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The radius configuration mechanism of affected products does not correctly check uploaded certificates. A malicious admin could upload a crafted certificate resulting in a denial-of-service condition or potentially issue commands on system level.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109825710/"
        },
        {
          "category": "workaround",
          "details": "Restrict access to application webserver for trusted users only",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.2,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-48428"
    },
    {
      "cve": "CVE-2023-48429",
      "cwe": {
        "id": "CWE-394",
        "name": "Unexpected Status Code or Return Value"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The Web UI of affected devices does not check the length of parameters in certain conditions. This allows a malicious admin to crash the server by sending a crafted request to the server. The server will automatically restart.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109825710/"
        },
        {
          "category": "workaround",
          "details": "Restrict access to application webserver for trusted users only",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 2.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-48429"
    },
    {
      "cve": "CVE-2023-48430",
      "cwe": {
        "id": "CWE-392",
        "name": "Missing Report of Error Condition"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The REST API of affected devices does not check the length of parameters in certain conditions. This allows a malicious admin to crash the server by sending a crafted request to the API. The server will automatically restart.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109825710/"
        },
        {
          "category": "workaround",
          "details": "Restrict access to application webserver for trusted users only",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 2.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-48430"
    },
    {
      "cve": "CVE-2023-48431",
      "cwe": {
        "id": "CWE-754",
        "name": "Improper Check for Unusual or Exceptional Conditions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Affected software does not correctly validate the response received by an UMC server. An attacker can use this to crash the affected software by providing and configuring a malicious UMC server or by manipulating the traffic from a legitimate UMC server (i.e. leveraging CVE-2023-48427).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V1.0 SP2 Update 2 or later version",
          "product_ids": [
            "CSAFPID-0001"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109825710/"
        },
        {
          "category": "workaround",
          "details": "Restrict access to application webserver for trusted users only",
          "product_ids": [
            "CSAFPID-0001"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.8,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:C/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001"
          ]
        }
      ],
      "title": "CVE-2023-48431"
    }
  ]
}

{
  "document": {
    "acknowledgments": [
      {
        "organization": "Siemens ProductCERT",
        "summary": "reporting these vulnerabilities to CISA."
      }
    ],
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Disclosure is not limited",
      "tlp": {
        "label": "WHITE",
        "url": "https://us-cert.cisa.gov/tlp/"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "Siemens has released new versions for the affected products and recommends to update to the latest versions.",
        "title": "Summary"
      },
      {
        "category": "general",
        "text": "As a general security measure, Siemens strongly recommends to protect network access to devices with appropriate mechanisms. In order to operate the devices in a protected IT environment, Siemens recommends to configure the environment according to Siemens\u0027 operational guidelines for Industrial Security (Download: \nhttps://www.siemens.com/cert/operational-guidelines-industrial-security), and to follow the recommendations in the product manuals.\nAdditional information on Industrial Security by Siemens can be found at: https://www.siemens.com/industrialsecurity",
        "title": "General Recommendations"
      },
      {
        "category": "general",
        "text": "For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories",
        "title": "Additional Resources"
      },
      {
        "category": "legal_disclaimer",
        "text": "Siemens Security Advisories are subject to the terms and conditions contained in Siemens\u0027 underlying license terms or other applicable agreements previously agreed to with Siemens (hereinafter \"License Terms\"). To the extent applicable to information, software or documentation made available in or through a Siemens Security Advisory, the Terms of Use of Siemens\u0027 Global Website (https://www.siemens.com/terms_of_use, hereinafter \"Terms of Use\"), in particular Sections 8-10 of the Terms of Use, shall apply additionally. In case of conflicts, the License Terms shall prevail over the Terms of Use.",
        "title": "Terms of Use"
      },
      {
        "category": "legal_disclaimer",
        "text": "All information products included in https://us-cert.cisa.gov/ics are provided \"as is\" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see https://us-cert.cisa.gov/tlp/.",
        "title": "Legal Notice"
      },
      {
        "category": "other",
        "text": "This CISA CSAF advisory was converted from Siemens ProductCERT\u0027s CSAF advisory.",
        "title": "Advisory Conversion Disclaimer"
      },
      {
        "category": "other",
        "text": "Multiple",
        "title": "Critical infrastructure sectors"
      },
      {
        "category": "other",
        "text": "Worldwide",
        "title": "Countries/areas deployed"
      },
      {
        "category": "other",
        "text": "Germany",
        "title": "Company headquarters location"
      },
      {
        "category": "general",
        "text": "CISA recommends users take defensive measures to minimize the exploitation risk of this vulnerability.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Minimize network exposure for all control system devices and/or systems, and ensure they are not accessible from the internet.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Locate control system networks and remote devices behind firewalls and isolate them from business networks.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "When remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most recent version available. Also recognize VPN is only as secure as its connected devices.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets. Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.",
        "title": "Recommended Practices"
      }
    ],
    "publisher": {
      "category": "other",
      "contact_details": "central@cisa.dhs.gov",
      "name": "CISA",
      "namespace": "https://www.cisa.gov/"
    },
    "references": [
      {
        "category": "self",
        "summary": "SSA-337522: Multiple Vulnerabilities in TIM 1531 IRC before V2.4.8 - CSAF Version",
        "url": "https://cert-portal.siemens.com/productcert/csaf/ssa-337522.json"
      },
      {
        "category": "self",
        "summary": "SSA-337522: Multiple Vulnerabilities in TIM 1531 IRC before V2.4.8 - HTML Version",
        "url": "https://cert-portal.siemens.com/productcert/html/ssa-337522.html"
      },
      {
        "category": "self",
        "summary": "SSA-337522: Multiple Vulnerabilities in TIM 1531 IRC before V2.4.8 - PDF Version",
        "url": "https://cert-portal.siemens.com/productcert/pdf/ssa-337522.pdf"
      },
      {
        "category": "self",
        "summary": "SSA-337522: Multiple Vulnerabilities in TIM 1531 IRC before V2.4.8 - TXT Version",
        "url": "https://cert-portal.siemens.com/productcert/txt/ssa-337522.txt"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-24-165-06 JSON",
        "url": "https://raw.githubusercontent.com/cisagov/CSAF/develop/csaf_files/OT/white/2024/icsa-24-165-06.json"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-24-165-06 - Web Version",
        "url": "https://www.cisa.gov/news-events/ics-advisories/icsa-24-165-06"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/alerts/ICS-ALERT-10-301-01"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/resources-tools/resources/ics-recommended-practices"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/topics/industrial-control-systems"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/sites/default/files/publications/Cybersecurity_Best_Practices_for_Industrial_Control_Systems.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/tips/ICS-TIP-12-146-01B"
      }
    ],
    "title": "Siemens TIM 1531 IRC",
    "tracking": {
      "current_release_date": "2024-07-09T00:00:00.000000Z",
      "generator": {
        "engine": {
          "name": "CISA CSAF Generator",
          "version": "1.0.0"
        }
      },
      "id": "ICSA-24-165-06",
      "initial_release_date": "2024-06-11T00:00:00.000000Z",
      "revision_history": [
        {
          "date": "2024-06-11T00:00:00.000000Z",
          "legacy_version": "1.0",
          "number": "1",
          "summary": "Publication Date"
        },
        {
          "date": "2024-07-09T00:00:00.000000Z",
          "legacy_version": "1.1",
          "number": "2",
          "summary": "Updated contents of CVE-2023-27321 (OPC Foundation UA .NET Standard: Description, CVSS vector, CWE)"
        }
      ],
      "status": "final",
      "version": "2"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV2.4.8",
                "product": {
                  "name": "SIPLUS TIM 1531 IRC (6AG1543-1MX00-7XE0)",
                  "product_id": "CSAFPID-0001",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6AG1543-1MX00-7XE0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIPLUS TIM 1531 IRC (6AG1543-1MX00-7XE0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003cV2.4.8",
                "product": {
                  "name": "TIM 1531 IRC (6GK7543-1MX00-0XE0)",
                  "product_id": "CSAFPID-0002",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6GK7543-1MX00-0XE0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "TIM 1531 IRC (6GK7543-1MX00-0XE0)"
          }
        ],
        "category": "vendor",
        "name": "Siemens"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2021-47178",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: scsi: target: core: Avoid smp_processor_id() in preemptible code.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2021-47178"
    },
    {
      "cve": "CVE-2022-1015",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel in linux/net/netfilter/nf_tables_api.c of the netfilter subsystem. This flaw allows a local user to cause an out-of-bounds write issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.6,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2022-1015"
    },
    {
      "cve": "CVE-2022-4304",
      "cwe": {
        "id": "CWE-326",
        "name": "Inadequate Encryption Strength"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A timing based side channel exists in the OpenSSL RSA Decryption implementation which could be sufficient to recover a plaintext across a network in a Bleichenbacher style attack. To achieve a successful decryption an attacker would have to be able to send a very large number of trial messages for decryption. The vulnerability affects all RSA padding modes: PKCS#1 v1.5, RSA-OEAP and RSASVE. For example, in a TLS connection, RSA is commonly used by a client to send an encrypted pre-master secret to the server. An attacker that had observed a genuine connection between a client and a server could use this flaw to send trial messages to the server and record the time taken to process them. After a sufficiently large number of messages the attacker could recover the pre-master secret used for the original connection and thus be able to decrypt the application data sent over that connection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2022-4304"
    },
    {
      "cve": "CVE-2022-4450",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The function PEM_read_bio_ex() reads a PEM file from a BIO and parses and decodes the \"name\" (e.g. \"CERTIFICATE\"), any header data and the payload data. If the function succeeds then the \"name_out\", \"header\" and \"data\" arguments are populated with pointers to buffers containing the relevant decoded data. The caller is responsible for freeing those buffers. It is possible to construct a PEM file that results in 0 bytes of payload data. In this case PEM_read_bio_ex() will return a failure code but will populate the header argument with a pointer to a buffer that has already been freed. If the caller also frees this buffer then a double free will occur. This will most likely lead to a crash. This could be exploited by an attacker who has the ability to supply malicious PEM files for parsing to achieve a denial of service attack. The functions PEM_read_bio() and PEM_read() are simple wrappers around PEM_read_bio_ex() and therefore these functions are also directly affected. These functions are also called indirectly by a number of other OpenSSL functions including PEM_X509_INFO_read_bio_ex() and SSL_CTX_use_serverinfo_file() which are also vulnerable. Some OpenSSL internal uses of these functions are not vulnerable because the caller does not free the header argument if PEM_read_bio_ex() returns a failure code. These locations include the PEM_read_bio_TYPE() functions as well as the decoders introduced in OpenSSL 3.0. The OpenSSL asn1parse command line application is also impacted by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2022-4450"
    },
    {
      "cve": "CVE-2022-39189",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered the x86 KVM subsystem in the Linux kernel before 5.18.17. Unprivileged guest users can compromise the guest kernel because TLB flush operations are mishandled in certain KVM_VCPU_PREEMPTED situations.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2022-39189"
    },
    {
      "cve": "CVE-2022-40225",
      "cwe": {
        "id": "CWE-681",
        "name": "Incorrect Conversion between Numeric Types"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Casting an internal value could lead to floating point exception under certain circumstances. This could allow an attacker to cause a denial of service condition on affected devices.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2022-40225"
    },
    {
      "cve": "CVE-2022-40303",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.10.3. When parsing a multi-gigabyte XML document with the XML_PARSE_HUGE parser option enabled, several integer counters can overflow. This results in an attempt to access an array at a negative 2GB offset, typically leading to a segmentation fault.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2022-40303"
    },
    {
      "cve": "CVE-2022-40304",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.10.3. Certain invalid XML entity definitions can corrupt a hash table key, potentially leading to subsequent logic errors. In one case, a double-free can be provoked.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2022-40304"
    },
    {
      "cve": "CVE-2022-45886",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel through 6.0.9. drivers/media/dvb-core/dvb_net.c has a .disconnect versus dvb_device_open race condition that leads to a use-after-free.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2022-45886"
    },
    {
      "cve": "CVE-2022-45887",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel through 6.0.9. drivers/media/usb/ttusb-dec/ttusb_dec.c has a memory leak because of the lack of a dvb_frontend_detach call.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2022-45887"
    },
    {
      "cve": "CVE-2022-45919",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel through 6.0.10. In drivers/media/dvb-core/dvb_ca_en50221.c, a use-after-free can occur is there is a disconnect after an open, because of the lack of a wait_event.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2022-45919"
    },
    {
      "cve": "CVE-2023-0160",
      "cwe": {
        "id": "CWE-667",
        "name": "Improper Locking"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A deadlock flaw was found in the Linux kernel\u2019s BPF subsystem. This flaw allows a local user to potentially crash the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-0160"
    },
    {
      "cve": "CVE-2023-0215",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The public API function BIO_new_NDEF is a helper function used for streaming ASN.1 data via a BIO. It is primarily used internally to OpenSSL to support the SMIME, CMS and PKCS7 streaming capabilities, but may also be called directly by end user applications. The function receives a BIO from the caller, prepends a new BIO_f_asn1 filter BIO onto the front of it to form a BIO chain, and then returns the new head of the BIO chain to the caller. Under certain conditions, for example if a CMS recipient public key is invalid, the new filter BIO is freed and the function returns a NULL result indicating a failure. However, in this case, the BIO chain is not properly cleaned up and the BIO passed by the caller still retains internal pointers to the previously freed filter BIO. If the caller then goes on to call BIO_pop() on the BIO then a use-after-free will occur. This will most likely result in a crash. This scenario occurs directly in the internal function B64_write_ASN1() which may cause BIO_new_NDEF() to be called and will subsequently call BIO_pop() on the BIO. This internal function is in turn called by the public API functions PEM_write_bio_ASN1_stream, PEM_write_bio_CMS_stream, PEM_write_bio_PKCS7_stream, SMIME_write_ASN1, SMIME_write_CMS and SMIME_write_PKCS7. Other public API functions that may be impacted by this include i2d_ASN1_bio_stream, BIO_new_CMS, BIO_new_PKCS7, i2d_CMS_bio_stream and i2d_PKCS7_bio_stream. The OpenSSL cms and smime command line applications are similarly affected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-0215"
    },
    {
      "cve": "CVE-2023-0286",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a type confusion vulnerability relating to X.400 address processing inside an X.509 GeneralName. X.400 addresses were parsed as an ASN1_STRING but the public structure definition for GENERAL_NAME incorrectly specified the type of the x400Address field as ASN1_TYPE. This field is subsequently interpreted by the OpenSSL function GENERAL_NAME_cmp as an ASN1_TYPE rather than an ASN1_STRING. When CRL checking is enabled (i.e. the application sets the X509_V_FLAG_CRL_CHECK flag), this vulnerability may allow an attacker to pass arbitrary pointers to a memcmp call, enabling them to read memory contents or enact a denial of service. In most cases, the attack requires the attacker to provide both the certificate chain and CRL, neither of which need to have a valid signature. If the attacker only controls one of these inputs, the other input must already contain an X.400 address as a CRL distribution point, which is uncommon. As such, this vulnerability is most likely to only affect applications which have implemented their own functionality for retrieving CRLs over a network.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-0286"
    },
    {
      "cve": "CVE-2023-0464",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A security vulnerability has been identified in all supported versions of OpenSSL related to the verification of X.509 certificate chains that include policy constraints. Attackers may be able to exploit this vulnerability by creating a malicious certificate chain that triggers exponential use of computational resources, leading to a denial-of-service (DoS) attack on affected systems.\r\n\r\nPolicy processing is disabled by default but can be enabled by passing the `-policy` argument to the command line utilities or by calling the `X509_VERIFY_PARAM_set1_policies()` function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-0464"
    },
    {
      "cve": "CVE-2023-0465",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Applications that use a non-default option when verifying certificates may be\r\nvulnerable to an attack from a malicious CA to circumvent certain checks.\r\n\r\nInvalid certificate policies in leaf certificates are silently ignored by\r\nOpenSSL and other certificate policy checks are skipped for that certificate.\r\nA malicious CA could use this to deliberately assert invalid certificate policies\r\nin order to circumvent policy checking on the certificate altogether.\r\n\r\nPolicy processing is disabled by default but can be enabled by passing\r\nthe `-policy` argument to the command line utilities or by calling the\r\n`X509_VERIFY_PARAM_set1_policies()` function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-0465"
    },
    {
      "cve": "CVE-2023-0466",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The function X509_VERIFY_PARAM_add0_policy() is documented to\nimplicitly enable the certificate policy check when doing certificate\nverification. However the implementation of the function does not\nenable the check which allows certificates with invalid or incorrect\npolicies to pass the certificate verification.\n\nAs suddenly enabling the policy check could break existing deployments it was\ndecided to keep the existing behavior of the X509_VERIFY_PARAM_add0_policy()\nfunction.\n\nInstead the applications that require OpenSSL to perform certificate\npolicy check need to use X509_VERIFY_PARAM_set1_policies() or explicitly\nenable the policy check by calling X509_VERIFY_PARAM_set_flags() with\nthe X509_V_FLAG_POLICY_CHECK flag argument.\n\nCertificate policy checks are disabled by default in OpenSSL and are not\ncommonly used by applications.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-0466"
    },
    {
      "cve": "CVE-2023-1017",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds write vulnerability exists in TPM2.0\u0027s Module Library allowing writing of a 2-byte data past the end of TPM2.0 command in the CryptParameterDecryption routine. An attacker who can successfully exploit this vulnerability can lead to denial of service (crashing the TPM chip/process or rendering it unusable) and/or arbitrary code execution in the TPM context.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-1017"
    },
    {
      "cve": "CVE-2023-2124",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds memory access flaw was found in the Linux kernel\u2019s XFS file system in how a user restores an XFS image after failure (with a dirty log journal). This flaw allows a local user to crash or potentially escalate their privileges on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-2124"
    },
    {
      "cve": "CVE-2023-2269",
      "cwe": {
        "id": "CWE-667",
        "name": "Improper Locking"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A denial of service problem was found, due to a possible recursive locking scenario, resulting in a deadlock in table_clear in drivers/md/dm-ioctl.c in the Linux Kernel Device Mapper-Multipathing sub-component.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-2269"
    },
    {
      "cve": "CVE-2023-21255",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In multiple functions of binder.c, there is a possible memory corruption due to a use after free. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-21255"
    },
    {
      "cve": "CVE-2023-27321",
      "cwe": {
        "id": "CWE-1325",
        "name": "Improperly Controlled Sequential Memory Allocation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "OPC Foundation UA .NET Standard ConditionRefresh Resource Exhaustion Denial-of-Service Vulnerability. This vulnerability allows remote attackers to create a denial-of-service condition on affected installations of OPC Foundation UA .NET Standard. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of OPC UA ConditionRefresh requests. By sending a large number of requests, an attacker can consume all available resources on the server. An attacker can leverage this vulnerability to create a denial-of-service condition on the system. Was ZDI-CAN-20505.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-27321"
    },
    {
      "cve": "CVE-2023-28319",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use after free vulnerability exists in curl \u003cv8.1.0 in the way libcurl offers a feature to verify an SSH server\u0027s public key using a SHA 256 hash. When this check fails, libcurl would free the memory for the fingerprint before it returns an error message containing the (now freed) hash. This flaw risks inserting sensitive heap-based data into the error message that might be shown to users or otherwise get leaked and revealed.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-28319"
    },
    {
      "cve": "CVE-2023-35788",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in fl_set_geneve_opt in net/sched/cls_flower.c in the Linux kernel before 6.3.7. It allows an out-of-bounds write in the flower classifier code via TCA_FLOWER_KEY_ENC_OPTS_GENEVE packets. This may result in denial of service or privilege escalation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-35788"
    },
    {
      "cve": "CVE-2023-35823",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel before 6.3.2. A use-after-free was found in saa7134_finidev in drivers/media/pci/saa7134/saa7134-core.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-35823"
    },
    {
      "cve": "CVE-2023-35824",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel before 6.3.2. A use-after-free was found in dm1105_remove in drivers/media/pci/dm1105/dm1105.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-35824"
    },
    {
      "cve": "CVE-2023-35828",
      "cwe": {
        "id": "CWE-362",
        "name": "Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel before 6.3.2. A use-after-free was found in renesas_usb3_remove in drivers/usb/gadget/udc/renesas_usb3.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-35828"
    },
    {
      "cve": "CVE-2023-35829",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel before 6.3.2. A use-after-free was found in rkvdec_remove in drivers/staging/media/rkvdec/rkvdec.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-35829"
    },
    {
      "cve": "CVE-2023-41910",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in lldpd before 1.0.17. By crafting a CDP PDU packet with specific CDP_TLV_ADDRESSES TLVs, a malicious actor can remotely force the lldpd daemon to perform an out-of-bounds read on heap memory. This occurs in cdp_decode in daemon/protocols/cdp.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-41910"
    },
    {
      "cve": "CVE-2023-50763",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The web server of affected products, if configured to allow the import of PKCS12 containers, could end up in an infinite loop when processing incomplete certificate chains.\r\n\r\nThis could allow an authenticated remote attacker to create a denial of service condition by importing specially crafted PKCS12 containers.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-50763"
    },
    {
      "cve": "CVE-2023-52474",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, the following vulnerability has been resolved: IB/hfi1: Fix bugs with non-PAGE_SIZE-end multi-iovec user SDMA requests hfi1 user SDMA request processing has two bugs that can cause data corruption for user SDMA requests that have multiple payload iovecs where an iovec other than the tail iovec does not run up to the page boundary for the buffer pointed to by that iovec.a Here are the specific bugs: 1. user_sdma_txadd() does not use struct user_sdma_iovec-\u003eiov.iov_len. Rather, user_sdma_txadd() will add up to PAGE_SIZE bytes from iovec to the packet, even if some of those bytes are past iovec-\u003eiov.iov_len and are thus not intended to be in the packet. 2. user_sdma_txadd() and user_sdma_send_pkts() fail to advance to the next iovec in user_sdma_request-\u003eiovs when the current iovec is not PAGE_SIZE and does not contain enough data to complete the packet. The transmitted packet will contain the wrong data from the iovec pages. This has not been an issue with SDMA packets from hfi1 Verbs or PSM2 because they only produce iovecs that end short of PAGE_SIZE as the tail iovec of an SDMA request. Fixing these bugs exposes other bugs with the SDMA pin cache (struct mmu_rb_handler) that get in way of supporting user SDMA requests with multiple payload iovecs whose buffers do not end at PAGE_SIZE. So this commit fixes those issues as well. Here are the mmu_rb_handler bugs that non-PAGE_SIZE-end multi-iovec payload user SDMA requests can hit: 1. Overlapping memory ranges in mmu_rb_handler will result in duplicate pinnings. 2. When extending an existing mmu_rb_handler entry (struct mmu_rb_node), the mmu_rb code (1) removes the existing entry under a lock, (2) releases that lock, pins the new pages, (3) then reacquires the lock to insert the extended mmu_rb_node. If someone else comes in and inserts an overlapping entry between (2) and (3), insert in (3) will fail. The failure path code in this case unpins _all_ pages in either the original mmu_rb_node or the new mmu_rb_node that was inserted between (2) and (3). 3. In hfi1_mmu_rb_remove_unless_exact(), mmu_rb_node-\u003erefcount is incremented outside of mmu_rb_handler-\u003elock. As a result, mmu_rb_node could be evicted by another thread that gets mmu_rb_handler-\u003elock and checks mmu_rb_node-\u003erefcount before mmu_rb_node-\u003erefcount is incremented. 4. Related to #2 above, SDMA request submission failure path does not check mmu_rb_node-\u003erefcount before freeing mmu_rb_node object. If there are other SDMA requests in progress whose iovecs have pointers to the now-freed mmu_rb_node(s), those pointers to the now-freed mmu_rb nodes will be dereferenced when those SDMA requests complete.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2023-52474"
    },
    {
      "cve": "CVE-2024-0775",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free flaw was found in the __ext4_remount in fs/ext4/super.c in ext4 in the Linux kernel. This flaw allows a local user to cause an information leak problem while freeing the old quota file names before a potential failure, leading to a use-after-free.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Update to V2.4.8 or later version",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://support.industry.siemens.com/cs/ww/en/view/109954889/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ],
      "title": "CVE-2024-0775"
    }
  ]
}

{
  "document": {
    "aggregate_severity": {
      "namespace": "https://www.suse.com/support/security/rating/",
      "text": "moderate"
    },
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Copyright 2024 SUSE LLC. All rights reserved.",
      "tlp": {
        "label": "WHITE",
        "url": "https://www.first.org/tlp/"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "Security update for openssl-1_1",
        "title": "Title of the patch"
      },
      {
        "category": "description",
        "text": "This update for openssl-1_1 fixes the following issues:\n\n- CVE-2023-0464: Fixed excessive Resource Usage Verifying X.509 Policy Constraints (bsc#1209624).\n",
        "title": "Description of the patch"
      },
      {
        "category": "details",
        "text": "SUSE-2023-1748,SUSE-SLE-Product-HPC-15-SP1-LTSS-2023-1748,SUSE-SLE-Product-SLES-15-SP1-LTSS-2023-1748,SUSE-SLE-Product-SLES_SAP-15-SP1-2023-1748",
        "title": "Patchnames"
      },
      {
        "category": "legal_disclaimer",
        "text": "CSAF 2.0 data is provided by SUSE under the Creative Commons License 4.0 with Attribution (CC-BY-4.0).",
        "title": "Terms of use"
      }
    ],
    "publisher": {
      "category": "vendor",
      "contact_details": "https://www.suse.com/support/security/contact/",
      "name": "SUSE Product Security Team",
      "namespace": "https://www.suse.com/"
    },
    "references": [
      {
        "category": "external",
        "summary": "SUSE ratings",
        "url": "https://www.suse.com/support/security/rating/"
      },
      {
        "category": "self",
        "summary": "URL of this CSAF notice",
        "url": "https://ftp.suse.com/pub/projects/security/csaf/suse-su-2023_1748-1.json"
      },
      {
        "category": "self",
        "summary": "URL for SUSE-SU-2023:1748-1",
        "url": "https://www.suse.com/support/update/announcement/2023/suse-su-20231748-1/"
      },
      {
        "category": "self",
        "summary": "E-Mail link for SUSE-SU-2023:1748-1",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2023-April/014352.html"
      },
      {
        "category": "self",
        "summary": "SUSE Bug 1209624",
        "url": "https://bugzilla.suse.com/1209624"
      },
      {
        "category": "self",
        "summary": "SUSE CVE CVE-2023-0464 page",
        "url": "https://www.suse.com/security/cve/CVE-2023-0464/"
      }
    ],
    "title": "Security update for openssl-1_1",
    "tracking": {
      "current_release_date": "2023-04-04T07:07:07Z",
      "generator": {
        "date": "2023-04-04T07:07:07Z",
        "engine": {
          "name": "cve-database.git:bin/generate-csaf.pl",
          "version": "1"
        }
      },
      "id": "SUSE-SU-2023:1748-1",
      "initial_release_date": "2023-04-04T07:07:07Z",
      "revision_history": [
        {
          "date": "2023-04-04T07:07:07Z",
          "number": "1",
          "summary": "Current version"
        }
      ],
      "status": "final",
      "version": "1"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-1_1-devel-1.1.0i-150100.14.45.1.aarch64",
                "product": {
                  "name": "libopenssl-1_1-devel-1.1.0i-150100.14.45.1.aarch64",
                  "product_id": "libopenssl-1_1-devel-1.1.0i-150100.14.45.1.aarch64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-1.1.0i-150100.14.45.1.aarch64",
                "product": {
                  "name": "libopenssl1_1-1.1.0i-150100.14.45.1.aarch64",
                  "product_id": "libopenssl1_1-1.1.0i-150100.14.45.1.aarch64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-hmac-1.1.0i-150100.14.45.1.aarch64",
                "product": {
                  "name": "libopenssl1_1-hmac-1.1.0i-150100.14.45.1.aarch64",
                  "product_id": "libopenssl1_1-hmac-1.1.0i-150100.14.45.1.aarch64"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-1_1-1.1.0i-150100.14.45.1.aarch64",
                "product": {
                  "name": "openssl-1_1-1.1.0i-150100.14.45.1.aarch64",
                  "product_id": "openssl-1_1-1.1.0i-150100.14.45.1.aarch64"
                }
              }
            ],
            "category": "architecture",
            "name": "aarch64"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-1_1-devel-64bit-1.1.0i-150100.14.45.1.aarch64_ilp32",
                "product": {
                  "name": "libopenssl-1_1-devel-64bit-1.1.0i-150100.14.45.1.aarch64_ilp32",
                  "product_id": "libopenssl-1_1-devel-64bit-1.1.0i-150100.14.45.1.aarch64_ilp32"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-64bit-1.1.0i-150100.14.45.1.aarch64_ilp32",
                "product": {
                  "name": "libopenssl1_1-64bit-1.1.0i-150100.14.45.1.aarch64_ilp32",
                  "product_id": "libopenssl1_1-64bit-1.1.0i-150100.14.45.1.aarch64_ilp32"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-hmac-64bit-1.1.0i-150100.14.45.1.aarch64_ilp32",
                "product": {
                  "name": "libopenssl1_1-hmac-64bit-1.1.0i-150100.14.45.1.aarch64_ilp32",
                  "product_id": "libopenssl1_1-hmac-64bit-1.1.0i-150100.14.45.1.aarch64_ilp32"
                }
              }
            ],
            "category": "architecture",
            "name": "aarch64_ilp32"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-1_1-devel-1.1.0i-150100.14.45.1.i586",
                "product": {
                  "name": "libopenssl-1_1-devel-1.1.0i-150100.14.45.1.i586",
                  "product_id": "libopenssl-1_1-devel-1.1.0i-150100.14.45.1.i586"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-1.1.0i-150100.14.45.1.i586",
                "product": {
                  "name": "libopenssl1_1-1.1.0i-150100.14.45.1.i586",
                  "product_id": "libopenssl1_1-1.1.0i-150100.14.45.1.i586"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-hmac-1.1.0i-150100.14.45.1.i586",
                "product": {
                  "name": "libopenssl1_1-hmac-1.1.0i-150100.14.45.1.i586",
                  "product_id": "libopenssl1_1-hmac-1.1.0i-150100.14.45.1.i586"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-1_1-1.1.0i-150100.14.45.1.i586",
                "product": {
                  "name": "openssl-1_1-1.1.0i-150100.14.45.1.i586",
                  "product_id": "openssl-1_1-1.1.0i-150100.14.45.1.i586"
                }
              }
            ],
            "category": "architecture",
            "name": "i586"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "openssl-1_1-doc-1.1.0i-150100.14.45.1.noarch",
                "product": {
                  "name": "openssl-1_1-doc-1.1.0i-150100.14.45.1.noarch",
                  "product_id": "openssl-1_1-doc-1.1.0i-150100.14.45.1.noarch"
                }
              }
            ],
            "category": "architecture",
            "name": "noarch"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-1_1-devel-1.1.0i-150100.14.45.1.ppc64le",
                "product": {
                  "name": "libopenssl-1_1-devel-1.1.0i-150100.14.45.1.ppc64le",
                  "product_id": "libopenssl-1_1-devel-1.1.0i-150100.14.45.1.ppc64le"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-1.1.0i-150100.14.45.1.ppc64le",
                "product": {
                  "name": "libopenssl1_1-1.1.0i-150100.14.45.1.ppc64le",
                  "product_id": "libopenssl1_1-1.1.0i-150100.14.45.1.ppc64le"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-hmac-1.1.0i-150100.14.45.1.ppc64le",
                "product": {
                  "name": "libopenssl1_1-hmac-1.1.0i-150100.14.45.1.ppc64le",
                  "product_id": "libopenssl1_1-hmac-1.1.0i-150100.14.45.1.ppc64le"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-1_1-1.1.0i-150100.14.45.1.ppc64le",
                "product": {
                  "name": "openssl-1_1-1.1.0i-150100.14.45.1.ppc64le",
                  "product_id": "openssl-1_1-1.1.0i-150100.14.45.1.ppc64le"
                }
              }
            ],
            "category": "architecture",
            "name": "ppc64le"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-1_1-devel-1.1.0i-150100.14.45.1.s390x",
                "product": {
                  "name": "libopenssl-1_1-devel-1.1.0i-150100.14.45.1.s390x",
                  "product_id": "libopenssl-1_1-devel-1.1.0i-150100.14.45.1.s390x"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-1.1.0i-150100.14.45.1.s390x",
                "product": {
                  "name": "libopenssl1_1-1.1.0i-150100.14.45.1.s390x",
                  "product_id": "libopenssl1_1-1.1.0i-150100.14.45.1.s390x"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-hmac-1.1.0i-150100.14.45.1.s390x",
                "product": {
                  "name": "libopenssl1_1-hmac-1.1.0i-150100.14.45.1.s390x",
                  "product_id": "libopenssl1_1-hmac-1.1.0i-150100.14.45.1.s390x"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-1_1-1.1.0i-150100.14.45.1.s390x",
                "product": {
                  "name": "openssl-1_1-1.1.0i-150100.14.45.1.s390x",
                  "product_id": "openssl-1_1-1.1.0i-150100.14.45.1.s390x"
                }
              }
            ],
            "category": "architecture",
            "name": "s390x"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-1_1-devel-1.1.0i-150100.14.45.1.x86_64",
                "product": {
                  "name": "libopenssl-1_1-devel-1.1.0i-150100.14.45.1.x86_64",
                  "product_id": "libopenssl-1_1-devel-1.1.0i-150100.14.45.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl-1_1-devel-32bit-1.1.0i-150100.14.45.1.x86_64",
                "product": {
                  "name": "libopenssl-1_1-devel-32bit-1.1.0i-150100.14.45.1.x86_64",
                  "product_id": "libopenssl-1_1-devel-32bit-1.1.0i-150100.14.45.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-1.1.0i-150100.14.45.1.x86_64",
                "product": {
                  "name": "libopenssl1_1-1.1.0i-150100.14.45.1.x86_64",
                  "product_id": "libopenssl1_1-1.1.0i-150100.14.45.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-32bit-1.1.0i-150100.14.45.1.x86_64",
                "product": {
                  "name": "libopenssl1_1-32bit-1.1.0i-150100.14.45.1.x86_64",
                  "product_id": "libopenssl1_1-32bit-1.1.0i-150100.14.45.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-hmac-1.1.0i-150100.14.45.1.x86_64",
                "product": {
                  "name": "libopenssl1_1-hmac-1.1.0i-150100.14.45.1.x86_64",
                  "product_id": "libopenssl1_1-hmac-1.1.0i-150100.14.45.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-hmac-32bit-1.1.0i-150100.14.45.1.x86_64",
                "product": {
                  "name": "libopenssl1_1-hmac-32bit-1.1.0i-150100.14.45.1.x86_64",
                  "product_id": "libopenssl1_1-hmac-32bit-1.1.0i-150100.14.45.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-1_1-1.1.0i-150100.14.45.1.x86_64",
                "product": {
                  "name": "openssl-1_1-1.1.0i-150100.14.45.1.x86_64",
                  "product_id": "openssl-1_1-1.1.0i-150100.14.45.1.x86_64"
                }
              }
            ],
            "category": "architecture",
            "name": "x86_64"
          },
          {
            "branches": [
              {
                "category": "product_name",
                "name": "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS",
                "product": {
                  "name": "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS",
                  "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:sle_hpc-ltss:15:sp1"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "SUSE Linux Enterprise Server 15 SP1-LTSS",
                "product": {
                  "name": "SUSE Linux Enterprise Server 15 SP1-LTSS",
                  "product_id": "SUSE Linux Enterprise Server 15 SP1-LTSS",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:sles-ltss:15:sp1"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "SUSE Linux Enterprise Server for SAP Applications 15 SP1",
                "product": {
                  "name": "SUSE Linux Enterprise Server for SAP Applications 15 SP1",
                  "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP1",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:sles_sap:15:sp1"
                  }
                }
              }
            ],
            "category": "product_family",
            "name": "SUSE Linux Enterprise"
          }
        ],
        "category": "vendor",
        "name": "SUSE"
      }
    ],
    "relationships": [
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.0i-150100.14.45.1.aarch64 as component of SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS:libopenssl-1_1-devel-1.1.0i-150100.14.45.1.aarch64"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.0i-150100.14.45.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.0i-150100.14.45.1.x86_64 as component of SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS:libopenssl-1_1-devel-1.1.0i-150100.14.45.1.x86_64"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.0i-150100.14.45.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-32bit-1.1.0i-150100.14.45.1.x86_64 as component of SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS:libopenssl-1_1-devel-32bit-1.1.0i-150100.14.45.1.x86_64"
        },
        "product_reference": "libopenssl-1_1-devel-32bit-1.1.0i-150100.14.45.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.0i-150100.14.45.1.aarch64 as component of SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS:libopenssl1_1-1.1.0i-150100.14.45.1.aarch64"
        },
        "product_reference": "libopenssl1_1-1.1.0i-150100.14.45.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.0i-150100.14.45.1.x86_64 as component of SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS:libopenssl1_1-1.1.0i-150100.14.45.1.x86_64"
        },
        "product_reference": "libopenssl1_1-1.1.0i-150100.14.45.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-32bit-1.1.0i-150100.14.45.1.x86_64 as component of SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS:libopenssl1_1-32bit-1.1.0i-150100.14.45.1.x86_64"
        },
        "product_reference": "libopenssl1_1-32bit-1.1.0i-150100.14.45.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.0i-150100.14.45.1.aarch64 as component of SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS:libopenssl1_1-hmac-1.1.0i-150100.14.45.1.aarch64"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.0i-150100.14.45.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.0i-150100.14.45.1.x86_64 as component of SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS:libopenssl1_1-hmac-1.1.0i-150100.14.45.1.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.0i-150100.14.45.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-32bit-1.1.0i-150100.14.45.1.x86_64 as component of SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS:libopenssl1_1-hmac-32bit-1.1.0i-150100.14.45.1.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-32bit-1.1.0i-150100.14.45.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.0i-150100.14.45.1.aarch64 as component of SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS:openssl-1_1-1.1.0i-150100.14.45.1.aarch64"
        },
        "product_reference": "openssl-1_1-1.1.0i-150100.14.45.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.0i-150100.14.45.1.x86_64 as component of SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS:openssl-1_1-1.1.0i-150100.14.45.1.x86_64"
        },
        "product_reference": "openssl-1_1-1.1.0i-150100.14.45.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.0i-150100.14.45.1.aarch64 as component of SUSE Linux Enterprise Server 15 SP1-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl-1_1-devel-1.1.0i-150100.14.45.1.aarch64"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.0i-150100.14.45.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP1-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.0i-150100.14.45.1.ppc64le as component of SUSE Linux Enterprise Server 15 SP1-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl-1_1-devel-1.1.0i-150100.14.45.1.ppc64le"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.0i-150100.14.45.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP1-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.0i-150100.14.45.1.s390x as component of SUSE Linux Enterprise Server 15 SP1-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl-1_1-devel-1.1.0i-150100.14.45.1.s390x"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.0i-150100.14.45.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP1-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.0i-150100.14.45.1.x86_64 as component of SUSE Linux Enterprise Server 15 SP1-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl-1_1-devel-1.1.0i-150100.14.45.1.x86_64"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.0i-150100.14.45.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP1-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-32bit-1.1.0i-150100.14.45.1.x86_64 as component of SUSE Linux Enterprise Server 15 SP1-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl-1_1-devel-32bit-1.1.0i-150100.14.45.1.x86_64"
        },
        "product_reference": "libopenssl-1_1-devel-32bit-1.1.0i-150100.14.45.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP1-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.0i-150100.14.45.1.aarch64 as component of SUSE Linux Enterprise Server 15 SP1-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_1-1.1.0i-150100.14.45.1.aarch64"
        },
        "product_reference": "libopenssl1_1-1.1.0i-150100.14.45.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP1-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.0i-150100.14.45.1.ppc64le as component of SUSE Linux Enterprise Server 15 SP1-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_1-1.1.0i-150100.14.45.1.ppc64le"
        },
        "product_reference": "libopenssl1_1-1.1.0i-150100.14.45.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP1-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.0i-150100.14.45.1.s390x as component of SUSE Linux Enterprise Server 15 SP1-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_1-1.1.0i-150100.14.45.1.s390x"
        },
        "product_reference": "libopenssl1_1-1.1.0i-150100.14.45.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP1-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.0i-150100.14.45.1.x86_64 as component of SUSE Linux Enterprise Server 15 SP1-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_1-1.1.0i-150100.14.45.1.x86_64"
        },
        "product_reference": "libopenssl1_1-1.1.0i-150100.14.45.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP1-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-32bit-1.1.0i-150100.14.45.1.x86_64 as component of SUSE Linux Enterprise Server 15 SP1-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_1-32bit-1.1.0i-150100.14.45.1.x86_64"
        },
        "product_reference": "libopenssl1_1-32bit-1.1.0i-150100.14.45.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP1-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.0i-150100.14.45.1.aarch64 as component of SUSE Linux Enterprise Server 15 SP1-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_1-hmac-1.1.0i-150100.14.45.1.aarch64"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.0i-150100.14.45.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP1-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.0i-150100.14.45.1.ppc64le as component of SUSE Linux Enterprise Server 15 SP1-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_1-hmac-1.1.0i-150100.14.45.1.ppc64le"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.0i-150100.14.45.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP1-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.0i-150100.14.45.1.s390x as component of SUSE Linux Enterprise Server 15 SP1-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_1-hmac-1.1.0i-150100.14.45.1.s390x"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.0i-150100.14.45.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP1-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.0i-150100.14.45.1.x86_64 as component of SUSE Linux Enterprise Server 15 SP1-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_1-hmac-1.1.0i-150100.14.45.1.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.0i-150100.14.45.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP1-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-32bit-1.1.0i-150100.14.45.1.x86_64 as component of SUSE Linux Enterprise Server 15 SP1-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_1-hmac-32bit-1.1.0i-150100.14.45.1.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-32bit-1.1.0i-150100.14.45.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP1-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.0i-150100.14.45.1.aarch64 as component of SUSE Linux Enterprise Server 15 SP1-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP1-LTSS:openssl-1_1-1.1.0i-150100.14.45.1.aarch64"
        },
        "product_reference": "openssl-1_1-1.1.0i-150100.14.45.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP1-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.0i-150100.14.45.1.ppc64le as component of SUSE Linux Enterprise Server 15 SP1-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP1-LTSS:openssl-1_1-1.1.0i-150100.14.45.1.ppc64le"
        },
        "product_reference": "openssl-1_1-1.1.0i-150100.14.45.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP1-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.0i-150100.14.45.1.s390x as component of SUSE Linux Enterprise Server 15 SP1-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP1-LTSS:openssl-1_1-1.1.0i-150100.14.45.1.s390x"
        },
        "product_reference": "openssl-1_1-1.1.0i-150100.14.45.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP1-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.0i-150100.14.45.1.x86_64 as component of SUSE Linux Enterprise Server 15 SP1-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP1-LTSS:openssl-1_1-1.1.0i-150100.14.45.1.x86_64"
        },
        "product_reference": "openssl-1_1-1.1.0i-150100.14.45.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP1-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.0i-150100.14.45.1.ppc64le as component of SUSE Linux Enterprise Server for SAP Applications 15 SP1",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP1:libopenssl-1_1-devel-1.1.0i-150100.14.45.1.ppc64le"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.0i-150100.14.45.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP1"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.0i-150100.14.45.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 15 SP1",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP1:libopenssl-1_1-devel-1.1.0i-150100.14.45.1.x86_64"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.0i-150100.14.45.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP1"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-32bit-1.1.0i-150100.14.45.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 15 SP1",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP1:libopenssl-1_1-devel-32bit-1.1.0i-150100.14.45.1.x86_64"
        },
        "product_reference": "libopenssl-1_1-devel-32bit-1.1.0i-150100.14.45.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP1"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.0i-150100.14.45.1.ppc64le as component of SUSE Linux Enterprise Server for SAP Applications 15 SP1",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP1:libopenssl1_1-1.1.0i-150100.14.45.1.ppc64le"
        },
        "product_reference": "libopenssl1_1-1.1.0i-150100.14.45.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP1"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.0i-150100.14.45.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 15 SP1",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP1:libopenssl1_1-1.1.0i-150100.14.45.1.x86_64"
        },
        "product_reference": "libopenssl1_1-1.1.0i-150100.14.45.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP1"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-32bit-1.1.0i-150100.14.45.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 15 SP1",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP1:libopenssl1_1-32bit-1.1.0i-150100.14.45.1.x86_64"
        },
        "product_reference": "libopenssl1_1-32bit-1.1.0i-150100.14.45.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP1"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.0i-150100.14.45.1.ppc64le as component of SUSE Linux Enterprise Server for SAP Applications 15 SP1",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP1:libopenssl1_1-hmac-1.1.0i-150100.14.45.1.ppc64le"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.0i-150100.14.45.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP1"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.0i-150100.14.45.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 15 SP1",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP1:libopenssl1_1-hmac-1.1.0i-150100.14.45.1.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.0i-150100.14.45.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP1"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-32bit-1.1.0i-150100.14.45.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 15 SP1",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP1:libopenssl1_1-hmac-32bit-1.1.0i-150100.14.45.1.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-32bit-1.1.0i-150100.14.45.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP1"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.0i-150100.14.45.1.ppc64le as component of SUSE Linux Enterprise Server for SAP Applications 15 SP1",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP1:openssl-1_1-1.1.0i-150100.14.45.1.ppc64le"
        },
        "product_reference": "openssl-1_1-1.1.0i-150100.14.45.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP1"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.0i-150100.14.45.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 15 SP1",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP1:openssl-1_1-1.1.0i-150100.14.45.1.x86_64"
        },
        "product_reference": "openssl-1_1-1.1.0i-150100.14.45.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP1"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2023-0464",
      "ids": [
        {
          "system_name": "SUSE CVE Page",
          "text": "https://www.suse.com/security/cve/CVE-2023-0464"
        }
      ],
      "notes": [
        {
          "category": "general",
          "text": "A security vulnerability has been identified in all supported versions\n\nof OpenSSL related to the verification of X.509 certificate chains\nthat include policy constraints.  Attackers may be able to exploit this\nvulnerability by creating a malicious certificate chain that triggers\nexponential use of computational resources, leading to a denial-of-service\n(DoS) attack on affected systems.\n\nPolicy processing is disabled by default but can be enabled by passing\nthe `-policy\u0027 argument to the command line utilities or by calling the\n`X509_VERIFY_PARAM_set1_policies()\u0027 function.",
          "title": "CVE description"
        }
      ],
      "product_status": {
        "recommended": [
          "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS:libopenssl-1_1-devel-1.1.0i-150100.14.45.1.aarch64",
          "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS:libopenssl-1_1-devel-1.1.0i-150100.14.45.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS:libopenssl-1_1-devel-32bit-1.1.0i-150100.14.45.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS:libopenssl1_1-1.1.0i-150100.14.45.1.aarch64",
          "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS:libopenssl1_1-1.1.0i-150100.14.45.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS:libopenssl1_1-32bit-1.1.0i-150100.14.45.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS:libopenssl1_1-hmac-1.1.0i-150100.14.45.1.aarch64",
          "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS:libopenssl1_1-hmac-1.1.0i-150100.14.45.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS:libopenssl1_1-hmac-32bit-1.1.0i-150100.14.45.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS:openssl-1_1-1.1.0i-150100.14.45.1.aarch64",
          "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS:openssl-1_1-1.1.0i-150100.14.45.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl-1_1-devel-1.1.0i-150100.14.45.1.aarch64",
          "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl-1_1-devel-1.1.0i-150100.14.45.1.ppc64le",
          "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl-1_1-devel-1.1.0i-150100.14.45.1.s390x",
          "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl-1_1-devel-1.1.0i-150100.14.45.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl-1_1-devel-32bit-1.1.0i-150100.14.45.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_1-1.1.0i-150100.14.45.1.aarch64",
          "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_1-1.1.0i-150100.14.45.1.ppc64le",
          "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_1-1.1.0i-150100.14.45.1.s390x",
          "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_1-1.1.0i-150100.14.45.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_1-32bit-1.1.0i-150100.14.45.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_1-hmac-1.1.0i-150100.14.45.1.aarch64",
          "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_1-hmac-1.1.0i-150100.14.45.1.ppc64le",
          "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_1-hmac-1.1.0i-150100.14.45.1.s390x",
          "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_1-hmac-1.1.0i-150100.14.45.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_1-hmac-32bit-1.1.0i-150100.14.45.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP1-LTSS:openssl-1_1-1.1.0i-150100.14.45.1.aarch64",
          "SUSE Linux Enterprise Server 15 SP1-LTSS:openssl-1_1-1.1.0i-150100.14.45.1.ppc64le",
          "SUSE Linux Enterprise Server 15 SP1-LTSS:openssl-1_1-1.1.0i-150100.14.45.1.s390x",
          "SUSE Linux Enterprise Server 15 SP1-LTSS:openssl-1_1-1.1.0i-150100.14.45.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP1:libopenssl-1_1-devel-1.1.0i-150100.14.45.1.ppc64le",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP1:libopenssl-1_1-devel-1.1.0i-150100.14.45.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP1:libopenssl-1_1-devel-32bit-1.1.0i-150100.14.45.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP1:libopenssl1_1-1.1.0i-150100.14.45.1.ppc64le",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP1:libopenssl1_1-1.1.0i-150100.14.45.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP1:libopenssl1_1-32bit-1.1.0i-150100.14.45.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP1:libopenssl1_1-hmac-1.1.0i-150100.14.45.1.ppc64le",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP1:libopenssl1_1-hmac-1.1.0i-150100.14.45.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP1:libopenssl1_1-hmac-32bit-1.1.0i-150100.14.45.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP1:openssl-1_1-1.1.0i-150100.14.45.1.ppc64le",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP1:openssl-1_1-1.1.0i-150100.14.45.1.x86_64"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "CVE-2023-0464",
          "url": "https://www.suse.com/security/cve/CVE-2023-0464"
        },
        {
          "category": "external",
          "summary": "SUSE Bug 1209624 for CVE-2023-0464",
          "url": "https://bugzilla.suse.com/1209624"
        },
        {
          "category": "external",
          "summary": "SUSE Bug 1225628 for CVE-2023-0464",
          "url": "https://bugzilla.suse.com/1225628"
        }
      ],
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or \"zypper patch\".\n",
          "product_ids": [
            "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS:libopenssl-1_1-devel-1.1.0i-150100.14.45.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS:libopenssl-1_1-devel-1.1.0i-150100.14.45.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS:libopenssl-1_1-devel-32bit-1.1.0i-150100.14.45.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS:libopenssl1_1-1.1.0i-150100.14.45.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS:libopenssl1_1-1.1.0i-150100.14.45.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS:libopenssl1_1-32bit-1.1.0i-150100.14.45.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS:libopenssl1_1-hmac-1.1.0i-150100.14.45.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS:libopenssl1_1-hmac-1.1.0i-150100.14.45.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS:libopenssl1_1-hmac-32bit-1.1.0i-150100.14.45.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS:openssl-1_1-1.1.0i-150100.14.45.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS:openssl-1_1-1.1.0i-150100.14.45.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl-1_1-devel-1.1.0i-150100.14.45.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl-1_1-devel-1.1.0i-150100.14.45.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl-1_1-devel-1.1.0i-150100.14.45.1.s390x",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl-1_1-devel-1.1.0i-150100.14.45.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl-1_1-devel-32bit-1.1.0i-150100.14.45.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_1-1.1.0i-150100.14.45.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_1-1.1.0i-150100.14.45.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_1-1.1.0i-150100.14.45.1.s390x",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_1-1.1.0i-150100.14.45.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_1-32bit-1.1.0i-150100.14.45.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_1-hmac-1.1.0i-150100.14.45.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_1-hmac-1.1.0i-150100.14.45.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_1-hmac-1.1.0i-150100.14.45.1.s390x",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_1-hmac-1.1.0i-150100.14.45.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_1-hmac-32bit-1.1.0i-150100.14.45.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:openssl-1_1-1.1.0i-150100.14.45.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:openssl-1_1-1.1.0i-150100.14.45.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:openssl-1_1-1.1.0i-150100.14.45.1.s390x",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:openssl-1_1-1.1.0i-150100.14.45.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP1:libopenssl-1_1-devel-1.1.0i-150100.14.45.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP1:libopenssl-1_1-devel-1.1.0i-150100.14.45.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP1:libopenssl-1_1-devel-32bit-1.1.0i-150100.14.45.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP1:libopenssl1_1-1.1.0i-150100.14.45.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP1:libopenssl1_1-1.1.0i-150100.14.45.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP1:libopenssl1_1-32bit-1.1.0i-150100.14.45.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP1:libopenssl1_1-hmac-1.1.0i-150100.14.45.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP1:libopenssl1_1-hmac-1.1.0i-150100.14.45.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP1:libopenssl1_1-hmac-32bit-1.1.0i-150100.14.45.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP1:openssl-1_1-1.1.0i-150100.14.45.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP1:openssl-1_1-1.1.0i-150100.14.45.1.x86_64"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS:libopenssl-1_1-devel-1.1.0i-150100.14.45.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS:libopenssl-1_1-devel-1.1.0i-150100.14.45.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS:libopenssl-1_1-devel-32bit-1.1.0i-150100.14.45.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS:libopenssl1_1-1.1.0i-150100.14.45.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS:libopenssl1_1-1.1.0i-150100.14.45.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS:libopenssl1_1-32bit-1.1.0i-150100.14.45.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS:libopenssl1_1-hmac-1.1.0i-150100.14.45.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS:libopenssl1_1-hmac-1.1.0i-150100.14.45.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS:libopenssl1_1-hmac-32bit-1.1.0i-150100.14.45.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS:openssl-1_1-1.1.0i-150100.14.45.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP1-LTSS:openssl-1_1-1.1.0i-150100.14.45.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl-1_1-devel-1.1.0i-150100.14.45.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl-1_1-devel-1.1.0i-150100.14.45.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl-1_1-devel-1.1.0i-150100.14.45.1.s390x",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl-1_1-devel-1.1.0i-150100.14.45.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl-1_1-devel-32bit-1.1.0i-150100.14.45.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_1-1.1.0i-150100.14.45.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_1-1.1.0i-150100.14.45.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_1-1.1.0i-150100.14.45.1.s390x",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_1-1.1.0i-150100.14.45.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_1-32bit-1.1.0i-150100.14.45.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_1-hmac-1.1.0i-150100.14.45.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_1-hmac-1.1.0i-150100.14.45.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_1-hmac-1.1.0i-150100.14.45.1.s390x",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_1-hmac-1.1.0i-150100.14.45.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_1-hmac-32bit-1.1.0i-150100.14.45.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:openssl-1_1-1.1.0i-150100.14.45.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:openssl-1_1-1.1.0i-150100.14.45.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:openssl-1_1-1.1.0i-150100.14.45.1.s390x",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:openssl-1_1-1.1.0i-150100.14.45.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP1:libopenssl-1_1-devel-1.1.0i-150100.14.45.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP1:libopenssl-1_1-devel-1.1.0i-150100.14.45.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP1:libopenssl-1_1-devel-32bit-1.1.0i-150100.14.45.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP1:libopenssl1_1-1.1.0i-150100.14.45.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP1:libopenssl1_1-1.1.0i-150100.14.45.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP1:libopenssl1_1-32bit-1.1.0i-150100.14.45.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP1:libopenssl1_1-hmac-1.1.0i-150100.14.45.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP1:libopenssl1_1-hmac-1.1.0i-150100.14.45.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP1:libopenssl1_1-hmac-32bit-1.1.0i-150100.14.45.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP1:openssl-1_1-1.1.0i-150100.14.45.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP1:openssl-1_1-1.1.0i-150100.14.45.1.x86_64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "date": "2023-04-04T07:07:07Z",
          "details": "moderate"
        }
      ],
      "title": "CVE-2023-0464"
    }
  ]
}

{
  "document": {
    "aggregate_severity": {
      "namespace": "https://www.suse.com/support/security/rating/",
      "text": "moderate"
    },
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Copyright 2024 SUSE LLC. All rights reserved.",
      "tlp": {
        "label": "WHITE",
        "url": "https://www.first.org/tlp/"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "Security update for openssl-1_1",
        "title": "Title of the patch"
      },
      {
        "category": "description",
        "text": "This update for openssl-1_1 fixes the following issues:\n\n- CVE-2023-0464: Fixed excessive Resource Usage Verifying X.509 Policy Constraints (bsc#1209624).\n- CVE-2023-0465: Invalid certificate policies in leaf certificates were silently ignored (bsc#1209878).\n- CVE-2023-0466: Certificate policy check were not enabled (bsc#1209873).\n",
        "title": "Description of the patch"
      },
      {
        "category": "details",
        "text": "SUSE-2023-1790,SUSE-SLE-Product-HPC-15-SP2-LTSS-2023-1790,SUSE-SLE-Product-HPC-15-SP3-ESPOS-2023-1790,SUSE-SLE-Product-HPC-15-SP3-LTSS-2023-1790,SUSE-SLE-Product-RT-15-SP3-2023-1790,SUSE-SLE-Product-SLES-15-SP2-LTSS-2023-1790,SUSE-SLE-Product-SLES-15-SP3-LTSS-2023-1790,SUSE-SLE-Product-SLES_SAP-15-SP2-2023-1790,SUSE-SLE-Product-SLES_SAP-15-SP3-2023-1790,SUSE-SLE-Product-SUSE-Manager-Proxy-4.2-2023-1790,SUSE-SLE-Product-SUSE-Manager-Server-4.2-2023-1790,SUSE-SUSE-MicroOS-5.1-2023-1790,SUSE-SUSE-MicroOS-5.2-2023-1790,SUSE-Storage-7-2023-1790,SUSE-Storage-7.1-2023-1790",
        "title": "Patchnames"
      },
      {
        "category": "legal_disclaimer",
        "text": "CSAF 2.0 data is provided by SUSE under the Creative Commons License 4.0 with Attribution (CC-BY-4.0).",
        "title": "Terms of use"
      }
    ],
    "publisher": {
      "category": "vendor",
      "contact_details": "https://www.suse.com/support/security/contact/",
      "name": "SUSE Product Security Team",
      "namespace": "https://www.suse.com/"
    },
    "references": [
      {
        "category": "external",
        "summary": "SUSE ratings",
        "url": "https://www.suse.com/support/security/rating/"
      },
      {
        "category": "self",
        "summary": "URL of this CSAF notice",
        "url": "https://ftp.suse.com/pub/projects/security/csaf/suse-su-2023_1790-1.json"
      },
      {
        "category": "self",
        "summary": "URL for SUSE-SU-2023:1790-1",
        "url": "https://www.suse.com/support/update/announcement/2023/suse-su-20231790-1/"
      },
      {
        "category": "self",
        "summary": "E-Mail link for SUSE-SU-2023:1790-1",
        "url": "https://lists.suse.com/pipermail/sle-updates/2023-April/028696.html"
      },
      {
        "category": "self",
        "summary": "SUSE Bug 1209624",
        "url": "https://bugzilla.suse.com/1209624"
      },
      {
        "category": "self",
        "summary": "SUSE Bug 1209873",
        "url": "https://bugzilla.suse.com/1209873"
      },
      {
        "category": "self",
        "summary": "SUSE Bug 1209878",
        "url": "https://bugzilla.suse.com/1209878"
      },
      {
        "category": "self",
        "summary": "SUSE CVE CVE-2023-0464 page",
        "url": "https://www.suse.com/security/cve/CVE-2023-0464/"
      },
      {
        "category": "self",
        "summary": "SUSE CVE CVE-2023-0465 page",
        "url": "https://www.suse.com/security/cve/CVE-2023-0465/"
      },
      {
        "category": "self",
        "summary": "SUSE CVE CVE-2023-0466 page",
        "url": "https://www.suse.com/security/cve/CVE-2023-0466/"
      }
    ],
    "title": "Security update for openssl-1_1",
    "tracking": {
      "current_release_date": "2023-04-06T13:36:45Z",
      "generator": {
        "date": "2023-04-06T13:36:45Z",
        "engine": {
          "name": "cve-database.git:bin/generate-csaf.pl",
          "version": "1"
        }
      },
      "id": "SUSE-SU-2023:1790-1",
      "initial_release_date": "2023-04-06T13:36:45Z",
      "revision_history": [
        {
          "date": "2023-04-06T13:36:45Z",
          "number": "1",
          "summary": "Current version"
        }
      ],
      "status": "final",
      "version": "1"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
                "product": {
                  "name": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
                  "product_id": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
                "product": {
                  "name": "libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
                  "product_id": "libopenssl1_1-1.1.1d-150200.11.62.1.aarch64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
                "product": {
                  "name": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
                  "product_id": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
                "product": {
                  "name": "openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
                  "product_id": "openssl-1_1-1.1.1d-150200.11.62.1.aarch64"
                }
              }
            ],
            "category": "architecture",
            "name": "aarch64"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-1_1-devel-64bit-1.1.1d-150200.11.62.1.aarch64_ilp32",
                "product": {
                  "name": "libopenssl-1_1-devel-64bit-1.1.1d-150200.11.62.1.aarch64_ilp32",
                  "product_id": "libopenssl-1_1-devel-64bit-1.1.1d-150200.11.62.1.aarch64_ilp32"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-64bit-1.1.1d-150200.11.62.1.aarch64_ilp32",
                "product": {
                  "name": "libopenssl1_1-64bit-1.1.1d-150200.11.62.1.aarch64_ilp32",
                  "product_id": "libopenssl1_1-64bit-1.1.1d-150200.11.62.1.aarch64_ilp32"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-hmac-64bit-1.1.1d-150200.11.62.1.aarch64_ilp32",
                "product": {
                  "name": "libopenssl1_1-hmac-64bit-1.1.1d-150200.11.62.1.aarch64_ilp32",
                  "product_id": "libopenssl1_1-hmac-64bit-1.1.1d-150200.11.62.1.aarch64_ilp32"
                }
              }
            ],
            "category": "architecture",
            "name": "aarch64_ilp32"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.i586",
                "product": {
                  "name": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.i586",
                  "product_id": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.i586"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-1.1.1d-150200.11.62.1.i586",
                "product": {
                  "name": "libopenssl1_1-1.1.1d-150200.11.62.1.i586",
                  "product_id": "libopenssl1_1-1.1.1d-150200.11.62.1.i586"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.i586",
                "product": {
                  "name": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.i586",
                  "product_id": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.i586"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-1_1-1.1.1d-150200.11.62.1.i586",
                "product": {
                  "name": "openssl-1_1-1.1.1d-150200.11.62.1.i586",
                  "product_id": "openssl-1_1-1.1.1d-150200.11.62.1.i586"
                }
              }
            ],
            "category": "architecture",
            "name": "i586"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch",
                "product": {
                  "name": "openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch",
                  "product_id": "openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch"
                }
              }
            ],
            "category": "architecture",
            "name": "noarch"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le",
                "product": {
                  "name": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le",
                  "product_id": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le",
                "product": {
                  "name": "libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le",
                  "product_id": "libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le",
                "product": {
                  "name": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le",
                  "product_id": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-1_1-1.1.1d-150200.11.62.1.ppc64le",
                "product": {
                  "name": "openssl-1_1-1.1.1d-150200.11.62.1.ppc64le",
                  "product_id": "openssl-1_1-1.1.1d-150200.11.62.1.ppc64le"
                }
              }
            ],
            "category": "architecture",
            "name": "ppc64le"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x",
                "product": {
                  "name": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x",
                  "product_id": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-1.1.1d-150200.11.62.1.s390x",
                "product": {
                  "name": "libopenssl1_1-1.1.1d-150200.11.62.1.s390x",
                  "product_id": "libopenssl1_1-1.1.1d-150200.11.62.1.s390x"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x",
                "product": {
                  "name": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x",
                  "product_id": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-1_1-1.1.1d-150200.11.62.1.s390x",
                "product": {
                  "name": "openssl-1_1-1.1.1d-150200.11.62.1.s390x",
                  "product_id": "openssl-1_1-1.1.1d-150200.11.62.1.s390x"
                }
              }
            ],
            "category": "architecture",
            "name": "s390x"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
                "product": {
                  "name": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
                  "product_id": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
                "product": {
                  "name": "libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
                  "product_id": "libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
                "product": {
                  "name": "libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
                  "product_id": "libopenssl1_1-1.1.1d-150200.11.62.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
                "product": {
                  "name": "libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
                  "product_id": "libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
                "product": {
                  "name": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
                  "product_id": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
                "product": {
                  "name": "libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
                  "product_id": "libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
                "product": {
                  "name": "openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
                  "product_id": "openssl-1_1-1.1.1d-150200.11.62.1.x86_64"
                }
              }
            ],
            "category": "architecture",
            "name": "x86_64"
          },
          {
            "branches": [
              {
                "category": "product_name",
                "name": "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS",
                "product": {
                  "name": "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS",
                  "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:sle_hpc-ltss:15:sp2"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS",
                "product": {
                  "name": "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS",
                  "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:sle_hpc-espos:15:sp3"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS",
                "product": {
                  "name": "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS",
                  "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:sle_hpc-ltss:15:sp3"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "SUSE Linux Enterprise Real Time 15 SP3",
                "product": {
                  "name": "SUSE Linux Enterprise Real Time 15 SP3",
                  "product_id": "SUSE Linux Enterprise Real Time 15 SP3",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:sle_rt:15:sp3"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "SUSE Linux Enterprise Server 15 SP2-LTSS",
                "product": {
                  "name": "SUSE Linux Enterprise Server 15 SP2-LTSS",
                  "product_id": "SUSE Linux Enterprise Server 15 SP2-LTSS",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:sles-ltss:15:sp2"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "SUSE Linux Enterprise Server 15 SP3-LTSS",
                "product": {
                  "name": "SUSE Linux Enterprise Server 15 SP3-LTSS",
                  "product_id": "SUSE Linux Enterprise Server 15 SP3-LTSS",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:sles-ltss:15:sp3"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "SUSE Linux Enterprise Server for SAP Applications 15 SP2",
                "product": {
                  "name": "SUSE Linux Enterprise Server for SAP Applications 15 SP2",
                  "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP2",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:sles_sap:15:sp2"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "SUSE Linux Enterprise Server for SAP Applications 15 SP3",
                "product": {
                  "name": "SUSE Linux Enterprise Server for SAP Applications 15 SP3",
                  "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP3",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:sles_sap:15:sp3"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "SUSE Manager Proxy 4.2",
                "product": {
                  "name": "SUSE Manager Proxy 4.2",
                  "product_id": "SUSE Manager Proxy 4.2",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:suse-manager-proxy:4.2"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "SUSE Manager Server 4.2",
                "product": {
                  "name": "SUSE Manager Server 4.2",
                  "product_id": "SUSE Manager Server 4.2",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:suse-manager-server:4.2"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "SUSE Linux Enterprise Micro 5.1",
                "product": {
                  "name": "SUSE Linux Enterprise Micro 5.1",
                  "product_id": "SUSE Linux Enterprise Micro 5.1",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:suse-microos:5.1"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "SUSE Linux Enterprise Micro 5.2",
                "product": {
                  "name": "SUSE Linux Enterprise Micro 5.2",
                  "product_id": "SUSE Linux Enterprise Micro 5.2",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:suse-microos:5.2"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "SUSE Enterprise Storage 7",
                "product": {
                  "name": "SUSE Enterprise Storage 7",
                  "product_id": "SUSE Enterprise Storage 7",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:ses:7"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "SUSE Enterprise Storage 7.1",
                "product": {
                  "name": "SUSE Enterprise Storage 7.1",
                  "product_id": "SUSE Enterprise Storage 7.1",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:ses:7.1"
                  }
                }
              }
            ],
            "category": "product_family",
            "name": "SUSE Linux Enterprise"
          }
        ],
        "category": "vendor",
        "name": "SUSE"
      }
    ],
    "relationships": [
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64 as component of SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1d-150200.11.62.1.aarch64 as component of SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64"
        },
        "product_reference": "libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64 as component of SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1d-150200.11.62.1.aarch64 as component of SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.aarch64"
        },
        "product_reference": "openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64 as component of SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1d-150200.11.62.1.aarch64 as component of SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64"
        },
        "product_reference": "libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64 as component of SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1d-150200.11.62.1.aarch64 as component of SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:openssl-1_1-1.1.1d-150200.11.62.1.aarch64"
        },
        "product_reference": "openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:openssl-1_1-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch as component of SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch"
        },
        "product_reference": "openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64 as component of SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1d-150200.11.62.1.aarch64 as component of SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64"
        },
        "product_reference": "libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64 as component of SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1d-150200.11.62.1.aarch64 as component of SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.aarch64"
        },
        "product_reference": "openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch as component of SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch"
        },
        "product_reference": "openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise Real Time 15 SP3",
          "product_id": "SUSE Linux Enterprise Real Time 15 SP3:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Real Time 15 SP3"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise Real Time 15 SP3",
          "product_id": "SUSE Linux Enterprise Real Time 15 SP3:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Real Time 15 SP3"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise Real Time 15 SP3",
          "product_id": "SUSE Linux Enterprise Real Time 15 SP3:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Real Time 15 SP3"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise Real Time 15 SP3",
          "product_id": "SUSE Linux Enterprise Real Time 15 SP3:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Real Time 15 SP3"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise Real Time 15 SP3",
          "product_id": "SUSE Linux Enterprise Real Time 15 SP3:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Real Time 15 SP3"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise Real Time 15 SP3",
          "product_id": "SUSE Linux Enterprise Real Time 15 SP3:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Real Time 15 SP3"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise Real Time 15 SP3",
          "product_id": "SUSE Linux Enterprise Real Time 15 SP3:openssl-1_1-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Real Time 15 SP3"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64 as component of SUSE Linux Enterprise Server 15 SP2-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP2-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le as component of SUSE Linux Enterprise Server 15 SP2-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP2-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x as component of SUSE Linux Enterprise Server 15 SP2-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP2-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise Server 15 SP2-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP2-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1d-150200.11.62.1.aarch64 as component of SUSE Linux Enterprise Server 15 SP2-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64"
        },
        "product_reference": "libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP2-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le as component of SUSE Linux Enterprise Server 15 SP2-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le"
        },
        "product_reference": "libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP2-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1d-150200.11.62.1.s390x as component of SUSE Linux Enterprise Server 15 SP2-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.s390x"
        },
        "product_reference": "libopenssl1_1-1.1.1d-150200.11.62.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP2-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise Server 15 SP2-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP2-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise Server 15 SP2-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP2-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64 as component of SUSE Linux Enterprise Server 15 SP2-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP2-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le as component of SUSE Linux Enterprise Server 15 SP2-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP2-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x as component of SUSE Linux Enterprise Server 15 SP2-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP2-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise Server 15 SP2-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP2-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise Server 15 SP2-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP2-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1d-150200.11.62.1.aarch64 as component of SUSE Linux Enterprise Server 15 SP2-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.aarch64"
        },
        "product_reference": "openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP2-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1d-150200.11.62.1.ppc64le as component of SUSE Linux Enterprise Server 15 SP2-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.ppc64le"
        },
        "product_reference": "openssl-1_1-1.1.1d-150200.11.62.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP2-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1d-150200.11.62.1.s390x as component of SUSE Linux Enterprise Server 15 SP2-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.s390x"
        },
        "product_reference": "openssl-1_1-1.1.1d-150200.11.62.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP2-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise Server 15 SP2-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP2-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64 as component of SUSE Linux Enterprise Server 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le as component of SUSE Linux Enterprise Server 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x as component of SUSE Linux Enterprise Server 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise Server 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise Server 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1d-150200.11.62.1.aarch64 as component of SUSE Linux Enterprise Server 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64"
        },
        "product_reference": "libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le as component of SUSE Linux Enterprise Server 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le"
        },
        "product_reference": "libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1d-150200.11.62.1.s390x as component of SUSE Linux Enterprise Server 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.s390x"
        },
        "product_reference": "libopenssl1_1-1.1.1d-150200.11.62.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise Server 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise Server 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64 as component of SUSE Linux Enterprise Server 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le as component of SUSE Linux Enterprise Server 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x as component of SUSE Linux Enterprise Server 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise Server 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise Server 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1d-150200.11.62.1.aarch64 as component of SUSE Linux Enterprise Server 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.aarch64"
        },
        "product_reference": "openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1d-150200.11.62.1.ppc64le as component of SUSE Linux Enterprise Server 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.ppc64le"
        },
        "product_reference": "openssl-1_1-1.1.1d-150200.11.62.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1d-150200.11.62.1.s390x as component of SUSE Linux Enterprise Server 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.s390x"
        },
        "product_reference": "openssl-1_1-1.1.1d-150200.11.62.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise Server 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch as component of SUSE Linux Enterprise Server 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch"
        },
        "product_reference": "openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le as component of SUSE Linux Enterprise Server for SAP Applications 15 SP2",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP2"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 15 SP2",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP2"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le as component of SUSE Linux Enterprise Server for SAP Applications 15 SP2",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le"
        },
        "product_reference": "libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP2"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 15 SP2",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP2"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 15 SP2",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP2"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le as component of SUSE Linux Enterprise Server for SAP Applications 15 SP2",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP2"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 15 SP2",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP2"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 15 SP2",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP2"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1d-150200.11.62.1.ppc64le as component of SUSE Linux Enterprise Server for SAP Applications 15 SP2",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP2:openssl-1_1-1.1.1d-150200.11.62.1.ppc64le"
        },
        "product_reference": "openssl-1_1-1.1.1d-150200.11.62.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP2"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 15 SP2",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP2:openssl-1_1-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP2"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le as component of SUSE Linux Enterprise Server for SAP Applications 15 SP3",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP3"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 15 SP3",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP3"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 15 SP3",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP3"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le as component of SUSE Linux Enterprise Server for SAP Applications 15 SP3",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le"
        },
        "product_reference": "libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP3"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 15 SP3",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP3"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 15 SP3",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP3"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le as component of SUSE Linux Enterprise Server for SAP Applications 15 SP3",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP3"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 15 SP3",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP3"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 15 SP3",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP3"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1d-150200.11.62.1.ppc64le as component of SUSE Linux Enterprise Server for SAP Applications 15 SP3",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP3:openssl-1_1-1.1.1d-150200.11.62.1.ppc64le"
        },
        "product_reference": "openssl-1_1-1.1.1d-150200.11.62.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP3"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 15 SP3",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP3:openssl-1_1-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP3"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch as component of SUSE Linux Enterprise Server for SAP Applications 15 SP3",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP3:openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch"
        },
        "product_reference": "openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP3"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Manager Proxy 4.2",
          "product_id": "SUSE Manager Proxy 4.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Manager Proxy 4.2"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Manager Proxy 4.2",
          "product_id": "SUSE Manager Proxy 4.2:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Manager Proxy 4.2"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Manager Proxy 4.2",
          "product_id": "SUSE Manager Proxy 4.2:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Manager Proxy 4.2"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Manager Proxy 4.2",
          "product_id": "SUSE Manager Proxy 4.2:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Manager Proxy 4.2"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Manager Proxy 4.2",
          "product_id": "SUSE Manager Proxy 4.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Manager Proxy 4.2"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Manager Proxy 4.2",
          "product_id": "SUSE Manager Proxy 4.2:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Manager Proxy 4.2"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Manager Proxy 4.2",
          "product_id": "SUSE Manager Proxy 4.2:openssl-1_1-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Manager Proxy 4.2"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le as component of SUSE Manager Server 4.2",
          "product_id": "SUSE Manager Server 4.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le",
        "relates_to_product_reference": "SUSE Manager Server 4.2"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x as component of SUSE Manager Server 4.2",
          "product_id": "SUSE Manager Server 4.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x",
        "relates_to_product_reference": "SUSE Manager Server 4.2"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Manager Server 4.2",
          "product_id": "SUSE Manager Server 4.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Manager Server 4.2"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Manager Server 4.2",
          "product_id": "SUSE Manager Server 4.2:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Manager Server 4.2"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le as component of SUSE Manager Server 4.2",
          "product_id": "SUSE Manager Server 4.2:libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le"
        },
        "product_reference": "libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le",
        "relates_to_product_reference": "SUSE Manager Server 4.2"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1d-150200.11.62.1.s390x as component of SUSE Manager Server 4.2",
          "product_id": "SUSE Manager Server 4.2:libopenssl1_1-1.1.1d-150200.11.62.1.s390x"
        },
        "product_reference": "libopenssl1_1-1.1.1d-150200.11.62.1.s390x",
        "relates_to_product_reference": "SUSE Manager Server 4.2"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Manager Server 4.2",
          "product_id": "SUSE Manager Server 4.2:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Manager Server 4.2"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Manager Server 4.2",
          "product_id": "SUSE Manager Server 4.2:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Manager Server 4.2"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le as component of SUSE Manager Server 4.2",
          "product_id": "SUSE Manager Server 4.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le",
        "relates_to_product_reference": "SUSE Manager Server 4.2"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x as component of SUSE Manager Server 4.2",
          "product_id": "SUSE Manager Server 4.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x",
        "relates_to_product_reference": "SUSE Manager Server 4.2"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Manager Server 4.2",
          "product_id": "SUSE Manager Server 4.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Manager Server 4.2"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Manager Server 4.2",
          "product_id": "SUSE Manager Server 4.2:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Manager Server 4.2"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1d-150200.11.62.1.ppc64le as component of SUSE Manager Server 4.2",
          "product_id": "SUSE Manager Server 4.2:openssl-1_1-1.1.1d-150200.11.62.1.ppc64le"
        },
        "product_reference": "openssl-1_1-1.1.1d-150200.11.62.1.ppc64le",
        "relates_to_product_reference": "SUSE Manager Server 4.2"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1d-150200.11.62.1.s390x as component of SUSE Manager Server 4.2",
          "product_id": "SUSE Manager Server 4.2:openssl-1_1-1.1.1d-150200.11.62.1.s390x"
        },
        "product_reference": "openssl-1_1-1.1.1d-150200.11.62.1.s390x",
        "relates_to_product_reference": "SUSE Manager Server 4.2"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Manager Server 4.2",
          "product_id": "SUSE Manager Server 4.2:openssl-1_1-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Manager Server 4.2"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64 as component of SUSE Linux Enterprise Micro 5.1",
          "product_id": "SUSE Linux Enterprise Micro 5.1:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Micro 5.1"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x as component of SUSE Linux Enterprise Micro 5.1",
          "product_id": "SUSE Linux Enterprise Micro 5.1:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Micro 5.1"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise Micro 5.1",
          "product_id": "SUSE Linux Enterprise Micro 5.1:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Micro 5.1"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1d-150200.11.62.1.aarch64 as component of SUSE Linux Enterprise Micro 5.1",
          "product_id": "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64"
        },
        "product_reference": "libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Micro 5.1"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1d-150200.11.62.1.s390x as component of SUSE Linux Enterprise Micro 5.1",
          "product_id": "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-1.1.1d-150200.11.62.1.s390x"
        },
        "product_reference": "libopenssl1_1-1.1.1d-150200.11.62.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Micro 5.1"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise Micro 5.1",
          "product_id": "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Micro 5.1"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64 as component of SUSE Linux Enterprise Micro 5.1",
          "product_id": "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Micro 5.1"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x as component of SUSE Linux Enterprise Micro 5.1",
          "product_id": "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Micro 5.1"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise Micro 5.1",
          "product_id": "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Micro 5.1"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1d-150200.11.62.1.aarch64 as component of SUSE Linux Enterprise Micro 5.1",
          "product_id": "SUSE Linux Enterprise Micro 5.1:openssl-1_1-1.1.1d-150200.11.62.1.aarch64"
        },
        "product_reference": "openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Micro 5.1"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1d-150200.11.62.1.s390x as component of SUSE Linux Enterprise Micro 5.1",
          "product_id": "SUSE Linux Enterprise Micro 5.1:openssl-1_1-1.1.1d-150200.11.62.1.s390x"
        },
        "product_reference": "openssl-1_1-1.1.1d-150200.11.62.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Micro 5.1"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise Micro 5.1",
          "product_id": "SUSE Linux Enterprise Micro 5.1:openssl-1_1-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Micro 5.1"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64 as component of SUSE Linux Enterprise Micro 5.2",
          "product_id": "SUSE Linux Enterprise Micro 5.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Micro 5.2"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x as component of SUSE Linux Enterprise Micro 5.2",
          "product_id": "SUSE Linux Enterprise Micro 5.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Micro 5.2"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise Micro 5.2",
          "product_id": "SUSE Linux Enterprise Micro 5.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Micro 5.2"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1d-150200.11.62.1.aarch64 as component of SUSE Linux Enterprise Micro 5.2",
          "product_id": "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64"
        },
        "product_reference": "libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Micro 5.2"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1d-150200.11.62.1.s390x as component of SUSE Linux Enterprise Micro 5.2",
          "product_id": "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-1.1.1d-150200.11.62.1.s390x"
        },
        "product_reference": "libopenssl1_1-1.1.1d-150200.11.62.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Micro 5.2"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise Micro 5.2",
          "product_id": "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Micro 5.2"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64 as component of SUSE Linux Enterprise Micro 5.2",
          "product_id": "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Micro 5.2"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x as component of SUSE Linux Enterprise Micro 5.2",
          "product_id": "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Micro 5.2"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise Micro 5.2",
          "product_id": "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Micro 5.2"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1d-150200.11.62.1.aarch64 as component of SUSE Linux Enterprise Micro 5.2",
          "product_id": "SUSE Linux Enterprise Micro 5.2:openssl-1_1-1.1.1d-150200.11.62.1.aarch64"
        },
        "product_reference": "openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Micro 5.2"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1d-150200.11.62.1.s390x as component of SUSE Linux Enterprise Micro 5.2",
          "product_id": "SUSE Linux Enterprise Micro 5.2:openssl-1_1-1.1.1d-150200.11.62.1.s390x"
        },
        "product_reference": "openssl-1_1-1.1.1d-150200.11.62.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Micro 5.2"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Linux Enterprise Micro 5.2",
          "product_id": "SUSE Linux Enterprise Micro 5.2:openssl-1_1-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Micro 5.2"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64 as component of SUSE Enterprise Storage 7",
          "product_id": "SUSE Enterprise Storage 7:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
        "relates_to_product_reference": "SUSE Enterprise Storage 7"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Enterprise Storage 7",
          "product_id": "SUSE Enterprise Storage 7:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Enterprise Storage 7"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1d-150200.11.62.1.aarch64 as component of SUSE Enterprise Storage 7",
          "product_id": "SUSE Enterprise Storage 7:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64"
        },
        "product_reference": "libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
        "relates_to_product_reference": "SUSE Enterprise Storage 7"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Enterprise Storage 7",
          "product_id": "SUSE Enterprise Storage 7:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Enterprise Storage 7"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Enterprise Storage 7",
          "product_id": "SUSE Enterprise Storage 7:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Enterprise Storage 7"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64 as component of SUSE Enterprise Storage 7",
          "product_id": "SUSE Enterprise Storage 7:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
        "relates_to_product_reference": "SUSE Enterprise Storage 7"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Enterprise Storage 7",
          "product_id": "SUSE Enterprise Storage 7:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Enterprise Storage 7"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Enterprise Storage 7",
          "product_id": "SUSE Enterprise Storage 7:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Enterprise Storage 7"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1d-150200.11.62.1.aarch64 as component of SUSE Enterprise Storage 7",
          "product_id": "SUSE Enterprise Storage 7:openssl-1_1-1.1.1d-150200.11.62.1.aarch64"
        },
        "product_reference": "openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
        "relates_to_product_reference": "SUSE Enterprise Storage 7"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Enterprise Storage 7",
          "product_id": "SUSE Enterprise Storage 7:openssl-1_1-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Enterprise Storage 7"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64 as component of SUSE Enterprise Storage 7.1",
          "product_id": "SUSE Enterprise Storage 7.1:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
        "relates_to_product_reference": "SUSE Enterprise Storage 7.1"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Enterprise Storage 7.1",
          "product_id": "SUSE Enterprise Storage 7.1:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Enterprise Storage 7.1"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Enterprise Storage 7.1",
          "product_id": "SUSE Enterprise Storage 7.1:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Enterprise Storage 7.1"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1d-150200.11.62.1.aarch64 as component of SUSE Enterprise Storage 7.1",
          "product_id": "SUSE Enterprise Storage 7.1:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64"
        },
        "product_reference": "libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
        "relates_to_product_reference": "SUSE Enterprise Storage 7.1"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Enterprise Storage 7.1",
          "product_id": "SUSE Enterprise Storage 7.1:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Enterprise Storage 7.1"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Enterprise Storage 7.1",
          "product_id": "SUSE Enterprise Storage 7.1:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Enterprise Storage 7.1"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64 as component of SUSE Enterprise Storage 7.1",
          "product_id": "SUSE Enterprise Storage 7.1:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
        "relates_to_product_reference": "SUSE Enterprise Storage 7.1"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Enterprise Storage 7.1",
          "product_id": "SUSE Enterprise Storage 7.1:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Enterprise Storage 7.1"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Enterprise Storage 7.1",
          "product_id": "SUSE Enterprise Storage 7.1:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Enterprise Storage 7.1"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1d-150200.11.62.1.aarch64 as component of SUSE Enterprise Storage 7.1",
          "product_id": "SUSE Enterprise Storage 7.1:openssl-1_1-1.1.1d-150200.11.62.1.aarch64"
        },
        "product_reference": "openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
        "relates_to_product_reference": "SUSE Enterprise Storage 7.1"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1d-150200.11.62.1.x86_64 as component of SUSE Enterprise Storage 7.1",
          "product_id": "SUSE Enterprise Storage 7.1:openssl-1_1-1.1.1d-150200.11.62.1.x86_64"
        },
        "product_reference": "openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
        "relates_to_product_reference": "SUSE Enterprise Storage 7.1"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch as component of SUSE Enterprise Storage 7.1",
          "product_id": "SUSE Enterprise Storage 7.1:openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch"
        },
        "product_reference": "openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch",
        "relates_to_product_reference": "SUSE Enterprise Storage 7.1"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2023-0464",
      "ids": [
        {
          "system_name": "SUSE CVE Page",
          "text": "https://www.suse.com/security/cve/CVE-2023-0464"
        }
      ],
      "notes": [
        {
          "category": "general",
          "text": "A security vulnerability has been identified in all supported versions\n\nof OpenSSL related to the verification of X.509 certificate chains\nthat include policy constraints.  Attackers may be able to exploit this\nvulnerability by creating a malicious certificate chain that triggers\nexponential use of computational resources, leading to a denial-of-service\n(DoS) attack on affected systems.\n\nPolicy processing is disabled by default but can be enabled by passing\nthe `-policy\u0027 argument to the command line utilities or by calling the\n`X509_VERIFY_PARAM_set1_policies()\u0027 function.",
          "title": "CVE description"
        }
      ],
      "product_status": {
        "recommended": [
          "SUSE Enterprise Storage 7.1:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Enterprise Storage 7.1:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Enterprise Storage 7.1:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Enterprise Storage 7.1:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Enterprise Storage 7.1:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Enterprise Storage 7.1:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Enterprise Storage 7.1:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Enterprise Storage 7.1:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Enterprise Storage 7.1:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Enterprise Storage 7.1:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Enterprise Storage 7.1:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Enterprise Storage 7.1:openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch",
          "SUSE Enterprise Storage 7:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Enterprise Storage 7:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Enterprise Storage 7:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Enterprise Storage 7:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Enterprise Storage 7:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Enterprise Storage 7:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Enterprise Storage 7:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Enterprise Storage 7:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Enterprise Storage 7:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Enterprise Storage 7:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch",
          "SUSE Linux Enterprise Micro 5.1:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise Micro 5.1:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x",
          "SUSE Linux Enterprise Micro 5.1:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-1.1.1d-150200.11.62.1.s390x",
          "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x",
          "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Micro 5.1:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise Micro 5.1:openssl-1_1-1.1.1d-150200.11.62.1.s390x",
          "SUSE Linux Enterprise Micro 5.1:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Micro 5.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise Micro 5.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x",
          "SUSE Linux Enterprise Micro 5.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-1.1.1d-150200.11.62.1.s390x",
          "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x",
          "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Micro 5.2:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise Micro 5.2:openssl-1_1-1.1.1d-150200.11.62.1.s390x",
          "SUSE Linux Enterprise Micro 5.2:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Real Time 15 SP3:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Real Time 15 SP3:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Real Time 15 SP3:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Real Time 15 SP3:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Real Time 15 SP3:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Real Time 15 SP3:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Real Time 15 SP3:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.s390x",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.s390x",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.s390x",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.s390x",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP2:openssl-1_1-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP2:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP3:openssl-1_1-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP3:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP3:openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch",
          "SUSE Manager Proxy 4.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Manager Proxy 4.2:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Manager Proxy 4.2:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Manager Proxy 4.2:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Manager Proxy 4.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Manager Proxy 4.2:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Manager Proxy 4.2:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Manager Server 4.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Manager Server 4.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x",
          "SUSE Manager Server 4.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Manager Server 4.2:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Manager Server 4.2:libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Manager Server 4.2:libopenssl1_1-1.1.1d-150200.11.62.1.s390x",
          "SUSE Manager Server 4.2:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Manager Server 4.2:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Manager Server 4.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Manager Server 4.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x",
          "SUSE Manager Server 4.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Manager Server 4.2:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Manager Server 4.2:openssl-1_1-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Manager Server 4.2:openssl-1_1-1.1.1d-150200.11.62.1.s390x",
          "SUSE Manager Server 4.2:openssl-1_1-1.1.1d-150200.11.62.1.x86_64"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "CVE-2023-0464",
          "url": "https://www.suse.com/security/cve/CVE-2023-0464"
        },
        {
          "category": "external",
          "summary": "SUSE Bug 1209624 for CVE-2023-0464",
          "url": "https://bugzilla.suse.com/1209624"
        },
        {
          "category": "external",
          "summary": "SUSE Bug 1225628 for CVE-2023-0464",
          "url": "https://bugzilla.suse.com/1225628"
        }
      ],
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or \"zypper patch\".\n",
          "product_ids": [
            "SUSE Enterprise Storage 7.1:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Enterprise Storage 7.1:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7.1:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7.1:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Enterprise Storage 7.1:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7.1:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7.1:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Enterprise Storage 7.1:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7.1:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7.1:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Enterprise Storage 7.1:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7.1:openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch",
            "SUSE Enterprise Storage 7:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Enterprise Storage 7:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Enterprise Storage 7:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Enterprise Storage 7:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Enterprise Storage 7:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch",
            "SUSE Linux Enterprise Micro 5.1:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Micro 5.1:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Micro 5.1:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Micro 5.1:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Micro 5.1:openssl-1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Micro 5.1:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Micro 5.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Micro 5.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Micro 5.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Micro 5.2:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Micro 5.2:openssl-1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Micro 5.2:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Real Time 15 SP3:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Real Time 15 SP3:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Real Time 15 SP3:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Real Time 15 SP3:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Real Time 15 SP3:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Real Time 15 SP3:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Real Time 15 SP3:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:openssl-1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:openssl-1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch",
            "SUSE Manager Proxy 4.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Proxy 4.2:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Proxy 4.2:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Proxy 4.2:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Proxy 4.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Proxy 4.2:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Proxy 4.2:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Server 4.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Manager Server 4.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x",
            "SUSE Manager Server 4.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Server 4.2:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Server 4.2:libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Manager Server 4.2:libopenssl1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Manager Server 4.2:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Server 4.2:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Server 4.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Manager Server 4.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x",
            "SUSE Manager Server 4.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Server 4.2:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Server 4.2:openssl-1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Manager Server 4.2:openssl-1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Manager Server 4.2:openssl-1_1-1.1.1d-150200.11.62.1.x86_64"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "SUSE Enterprise Storage 7.1:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Enterprise Storage 7.1:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7.1:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7.1:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Enterprise Storage 7.1:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7.1:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7.1:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Enterprise Storage 7.1:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7.1:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7.1:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Enterprise Storage 7.1:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7.1:openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch",
            "SUSE Enterprise Storage 7:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Enterprise Storage 7:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Enterprise Storage 7:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Enterprise Storage 7:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Enterprise Storage 7:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch",
            "SUSE Linux Enterprise Micro 5.1:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Micro 5.1:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Micro 5.1:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Micro 5.1:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Micro 5.1:openssl-1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Micro 5.1:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Micro 5.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Micro 5.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Micro 5.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Micro 5.2:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Micro 5.2:openssl-1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Micro 5.2:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Real Time 15 SP3:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Real Time 15 SP3:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Real Time 15 SP3:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Real Time 15 SP3:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Real Time 15 SP3:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Real Time 15 SP3:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Real Time 15 SP3:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:openssl-1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:openssl-1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch",
            "SUSE Manager Proxy 4.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Proxy 4.2:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Proxy 4.2:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Proxy 4.2:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Proxy 4.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Proxy 4.2:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Proxy 4.2:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Server 4.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Manager Server 4.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x",
            "SUSE Manager Server 4.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Server 4.2:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Server 4.2:libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Manager Server 4.2:libopenssl1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Manager Server 4.2:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Server 4.2:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Server 4.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Manager Server 4.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x",
            "SUSE Manager Server 4.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Server 4.2:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Server 4.2:openssl-1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Manager Server 4.2:openssl-1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Manager Server 4.2:openssl-1_1-1.1.1d-150200.11.62.1.x86_64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "date": "2023-04-06T13:36:45Z",
          "details": "moderate"
        }
      ],
      "title": "CVE-2023-0464"
    },
    {
      "cve": "CVE-2023-0465",
      "ids": [
        {
          "system_name": "SUSE CVE Page",
          "text": "https://www.suse.com/security/cve/CVE-2023-0465"
        }
      ],
      "notes": [
        {
          "category": "general",
          "text": "Applications that use a non-default option when verifying certificates may be\nvulnerable to an attack from a malicious CA to circumvent certain checks.\n\nInvalid certificate policies in leaf certificates are silently ignored by\nOpenSSL and other certificate policy checks are skipped for that certificate.\nA malicious CA could use this to deliberately assert invalid certificate policies\nin order to circumvent policy checking on the certificate altogether.\n\nPolicy processing is disabled by default but can be enabled by passing\nthe `-policy\u0027 argument to the command line utilities or by calling the\n`X509_VERIFY_PARAM_set1_policies()\u0027 function.",
          "title": "CVE description"
        }
      ],
      "product_status": {
        "recommended": [
          "SUSE Enterprise Storage 7.1:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Enterprise Storage 7.1:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Enterprise Storage 7.1:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Enterprise Storage 7.1:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Enterprise Storage 7.1:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Enterprise Storage 7.1:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Enterprise Storage 7.1:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Enterprise Storage 7.1:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Enterprise Storage 7.1:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Enterprise Storage 7.1:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Enterprise Storage 7.1:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Enterprise Storage 7.1:openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch",
          "SUSE Enterprise Storage 7:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Enterprise Storage 7:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Enterprise Storage 7:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Enterprise Storage 7:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Enterprise Storage 7:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Enterprise Storage 7:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Enterprise Storage 7:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Enterprise Storage 7:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Enterprise Storage 7:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Enterprise Storage 7:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch",
          "SUSE Linux Enterprise Micro 5.1:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise Micro 5.1:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x",
          "SUSE Linux Enterprise Micro 5.1:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-1.1.1d-150200.11.62.1.s390x",
          "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x",
          "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Micro 5.1:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise Micro 5.1:openssl-1_1-1.1.1d-150200.11.62.1.s390x",
          "SUSE Linux Enterprise Micro 5.1:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Micro 5.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise Micro 5.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x",
          "SUSE Linux Enterprise Micro 5.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-1.1.1d-150200.11.62.1.s390x",
          "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x",
          "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Micro 5.2:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise Micro 5.2:openssl-1_1-1.1.1d-150200.11.62.1.s390x",
          "SUSE Linux Enterprise Micro 5.2:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Real Time 15 SP3:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Real Time 15 SP3:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Real Time 15 SP3:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Real Time 15 SP3:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Real Time 15 SP3:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Real Time 15 SP3:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Real Time 15 SP3:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.s390x",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.s390x",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.s390x",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.s390x",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP2:openssl-1_1-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP2:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP3:openssl-1_1-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP3:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP3:openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch",
          "SUSE Manager Proxy 4.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Manager Proxy 4.2:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Manager Proxy 4.2:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Manager Proxy 4.2:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Manager Proxy 4.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Manager Proxy 4.2:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Manager Proxy 4.2:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Manager Server 4.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Manager Server 4.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x",
          "SUSE Manager Server 4.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Manager Server 4.2:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Manager Server 4.2:libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Manager Server 4.2:libopenssl1_1-1.1.1d-150200.11.62.1.s390x",
          "SUSE Manager Server 4.2:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Manager Server 4.2:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Manager Server 4.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Manager Server 4.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x",
          "SUSE Manager Server 4.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Manager Server 4.2:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Manager Server 4.2:openssl-1_1-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Manager Server 4.2:openssl-1_1-1.1.1d-150200.11.62.1.s390x",
          "SUSE Manager Server 4.2:openssl-1_1-1.1.1d-150200.11.62.1.x86_64"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "CVE-2023-0465",
          "url": "https://www.suse.com/security/cve/CVE-2023-0465"
        },
        {
          "category": "external",
          "summary": "SUSE Bug 1209878 for CVE-2023-0465",
          "url": "https://bugzilla.suse.com/1209878"
        },
        {
          "category": "external",
          "summary": "SUSE Bug 1212331 for CVE-2023-0465",
          "url": "https://bugzilla.suse.com/1212331"
        },
        {
          "category": "external",
          "summary": "SUSE Bug 1215014 for CVE-2023-0465",
          "url": "https://bugzilla.suse.com/1215014"
        }
      ],
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or \"zypper patch\".\n",
          "product_ids": [
            "SUSE Enterprise Storage 7.1:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Enterprise Storage 7.1:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7.1:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7.1:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Enterprise Storage 7.1:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7.1:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7.1:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Enterprise Storage 7.1:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7.1:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7.1:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Enterprise Storage 7.1:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7.1:openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch",
            "SUSE Enterprise Storage 7:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Enterprise Storage 7:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Enterprise Storage 7:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Enterprise Storage 7:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Enterprise Storage 7:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch",
            "SUSE Linux Enterprise Micro 5.1:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Micro 5.1:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Micro 5.1:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Micro 5.1:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Micro 5.1:openssl-1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Micro 5.1:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Micro 5.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Micro 5.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Micro 5.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Micro 5.2:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Micro 5.2:openssl-1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Micro 5.2:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Real Time 15 SP3:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Real Time 15 SP3:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Real Time 15 SP3:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Real Time 15 SP3:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Real Time 15 SP3:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Real Time 15 SP3:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Real Time 15 SP3:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:openssl-1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:openssl-1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch",
            "SUSE Manager Proxy 4.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Proxy 4.2:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Proxy 4.2:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Proxy 4.2:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Proxy 4.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Proxy 4.2:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Proxy 4.2:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Server 4.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Manager Server 4.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x",
            "SUSE Manager Server 4.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Server 4.2:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Server 4.2:libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Manager Server 4.2:libopenssl1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Manager Server 4.2:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Server 4.2:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Server 4.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Manager Server 4.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x",
            "SUSE Manager Server 4.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Server 4.2:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Server 4.2:openssl-1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Manager Server 4.2:openssl-1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Manager Server 4.2:openssl-1_1-1.1.1d-150200.11.62.1.x86_64"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:U/C:H/I:H/A:N",
            "version": "3.1"
          },
          "products": [
            "SUSE Enterprise Storage 7.1:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Enterprise Storage 7.1:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7.1:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7.1:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Enterprise Storage 7.1:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7.1:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7.1:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Enterprise Storage 7.1:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7.1:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7.1:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Enterprise Storage 7.1:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7.1:openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch",
            "SUSE Enterprise Storage 7:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Enterprise Storage 7:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Enterprise Storage 7:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Enterprise Storage 7:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Enterprise Storage 7:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch",
            "SUSE Linux Enterprise Micro 5.1:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Micro 5.1:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Micro 5.1:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Micro 5.1:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Micro 5.1:openssl-1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Micro 5.1:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Micro 5.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Micro 5.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Micro 5.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Micro 5.2:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Micro 5.2:openssl-1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Micro 5.2:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Real Time 15 SP3:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Real Time 15 SP3:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Real Time 15 SP3:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Real Time 15 SP3:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Real Time 15 SP3:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Real Time 15 SP3:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Real Time 15 SP3:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:openssl-1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:openssl-1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch",
            "SUSE Manager Proxy 4.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Proxy 4.2:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Proxy 4.2:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Proxy 4.2:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Proxy 4.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Proxy 4.2:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Proxy 4.2:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Server 4.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Manager Server 4.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x",
            "SUSE Manager Server 4.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Server 4.2:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Server 4.2:libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Manager Server 4.2:libopenssl1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Manager Server 4.2:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Server 4.2:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Server 4.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Manager Server 4.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x",
            "SUSE Manager Server 4.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Server 4.2:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Server 4.2:openssl-1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Manager Server 4.2:openssl-1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Manager Server 4.2:openssl-1_1-1.1.1d-150200.11.62.1.x86_64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "date": "2023-04-06T13:36:45Z",
          "details": "moderate"
        }
      ],
      "title": "CVE-2023-0465"
    },
    {
      "cve": "CVE-2023-0466",
      "ids": [
        {
          "system_name": "SUSE CVE Page",
          "text": "https://www.suse.com/security/cve/CVE-2023-0466"
        }
      ],
      "notes": [
        {
          "category": "general",
          "text": "The function X509_VERIFY_PARAM_add0_policy() is documented to\nimplicitly enable the certificate policy check when doing certificate\nverification. However the implementation of the function does not\nenable the check which allows certificates with invalid or incorrect\npolicies to pass the certificate verification.\n\nAs suddenly enabling the policy check could break existing deployments it was\ndecided to keep the existing behavior of the X509_VERIFY_PARAM_add0_policy()\nfunction.\n\nInstead the applications that require OpenSSL to perform certificate\npolicy check need to use X509_VERIFY_PARAM_set1_policies() or explicitly\nenable the policy check by calling X509_VERIFY_PARAM_set_flags() with\nthe X509_V_FLAG_POLICY_CHECK flag argument.\n\nCertificate policy checks are disabled by default in OpenSSL and are not\ncommonly used by applications.",
          "title": "CVE description"
        }
      ],
      "product_status": {
        "recommended": [
          "SUSE Enterprise Storage 7.1:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Enterprise Storage 7.1:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Enterprise Storage 7.1:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Enterprise Storage 7.1:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Enterprise Storage 7.1:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Enterprise Storage 7.1:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Enterprise Storage 7.1:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Enterprise Storage 7.1:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Enterprise Storage 7.1:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Enterprise Storage 7.1:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Enterprise Storage 7.1:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Enterprise Storage 7.1:openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch",
          "SUSE Enterprise Storage 7:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Enterprise Storage 7:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Enterprise Storage 7:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Enterprise Storage 7:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Enterprise Storage 7:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Enterprise Storage 7:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Enterprise Storage 7:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Enterprise Storage 7:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Enterprise Storage 7:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Enterprise Storage 7:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch",
          "SUSE Linux Enterprise Micro 5.1:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise Micro 5.1:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x",
          "SUSE Linux Enterprise Micro 5.1:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-1.1.1d-150200.11.62.1.s390x",
          "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x",
          "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Micro 5.1:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise Micro 5.1:openssl-1_1-1.1.1d-150200.11.62.1.s390x",
          "SUSE Linux Enterprise Micro 5.1:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Micro 5.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise Micro 5.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x",
          "SUSE Linux Enterprise Micro 5.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-1.1.1d-150200.11.62.1.s390x",
          "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x",
          "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Micro 5.2:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise Micro 5.2:openssl-1_1-1.1.1d-150200.11.62.1.s390x",
          "SUSE Linux Enterprise Micro 5.2:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Real Time 15 SP3:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Real Time 15 SP3:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Real Time 15 SP3:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Real Time 15 SP3:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Real Time 15 SP3:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Real Time 15 SP3:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Real Time 15 SP3:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.s390x",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.s390x",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.s390x",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.s390x",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP2:openssl-1_1-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP2:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP3:openssl-1_1-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP3:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP3:openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch",
          "SUSE Manager Proxy 4.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Manager Proxy 4.2:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Manager Proxy 4.2:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Manager Proxy 4.2:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Manager Proxy 4.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Manager Proxy 4.2:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Manager Proxy 4.2:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Manager Server 4.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Manager Server 4.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x",
          "SUSE Manager Server 4.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Manager Server 4.2:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Manager Server 4.2:libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Manager Server 4.2:libopenssl1_1-1.1.1d-150200.11.62.1.s390x",
          "SUSE Manager Server 4.2:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Manager Server 4.2:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Manager Server 4.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Manager Server 4.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x",
          "SUSE Manager Server 4.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Manager Server 4.2:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
          "SUSE Manager Server 4.2:openssl-1_1-1.1.1d-150200.11.62.1.ppc64le",
          "SUSE Manager Server 4.2:openssl-1_1-1.1.1d-150200.11.62.1.s390x",
          "SUSE Manager Server 4.2:openssl-1_1-1.1.1d-150200.11.62.1.x86_64"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "CVE-2023-0466",
          "url": "https://www.suse.com/security/cve/CVE-2023-0466"
        },
        {
          "category": "external",
          "summary": "SUSE Bug 1209873 for CVE-2023-0466",
          "url": "https://bugzilla.suse.com/1209873"
        }
      ],
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or \"zypper patch\".\n",
          "product_ids": [
            "SUSE Enterprise Storage 7.1:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Enterprise Storage 7.1:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7.1:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7.1:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Enterprise Storage 7.1:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7.1:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7.1:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Enterprise Storage 7.1:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7.1:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7.1:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Enterprise Storage 7.1:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7.1:openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch",
            "SUSE Enterprise Storage 7:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Enterprise Storage 7:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Enterprise Storage 7:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Enterprise Storage 7:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Enterprise Storage 7:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch",
            "SUSE Linux Enterprise Micro 5.1:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Micro 5.1:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Micro 5.1:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Micro 5.1:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Micro 5.1:openssl-1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Micro 5.1:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Micro 5.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Micro 5.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Micro 5.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Micro 5.2:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Micro 5.2:openssl-1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Micro 5.2:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Real Time 15 SP3:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Real Time 15 SP3:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Real Time 15 SP3:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Real Time 15 SP3:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Real Time 15 SP3:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Real Time 15 SP3:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Real Time 15 SP3:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:openssl-1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:openssl-1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch",
            "SUSE Manager Proxy 4.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Proxy 4.2:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Proxy 4.2:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Proxy 4.2:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Proxy 4.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Proxy 4.2:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Proxy 4.2:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Server 4.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Manager Server 4.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x",
            "SUSE Manager Server 4.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Server 4.2:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Server 4.2:libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Manager Server 4.2:libopenssl1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Manager Server 4.2:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Server 4.2:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Server 4.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Manager Server 4.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x",
            "SUSE Manager Server 4.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Server 4.2:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Server 4.2:openssl-1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Manager Server 4.2:openssl-1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Manager Server 4.2:openssl-1_1-1.1.1d-150200.11.62.1.x86_64"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 2,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:H/UI:R/S:U/C:N/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "SUSE Enterprise Storage 7.1:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Enterprise Storage 7.1:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7.1:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7.1:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Enterprise Storage 7.1:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7.1:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7.1:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Enterprise Storage 7.1:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7.1:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7.1:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Enterprise Storage 7.1:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7.1:openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch",
            "SUSE Enterprise Storage 7:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Enterprise Storage 7:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Enterprise Storage 7:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Enterprise Storage 7:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Enterprise Storage 7:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Enterprise Storage 7:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch",
            "SUSE Linux Enterprise Micro 5.1:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Micro 5.1:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Micro 5.1:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Micro 5.1:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Micro 5.1:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Micro 5.1:openssl-1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Micro 5.1:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Micro 5.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Micro 5.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Micro 5.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Micro 5.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Micro 5.2:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Micro 5.2:openssl-1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Micro 5.2:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Real Time 15 SP3:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Real Time 15 SP3:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Real Time 15 SP3:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Real Time 15 SP3:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Real Time 15 SP3:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Real Time 15 SP3:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Real Time 15 SP3:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:openssl-1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:openssl-1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:openssl-1_1-doc-1.1.1d-150200.11.62.1.noarch",
            "SUSE Manager Proxy 4.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Proxy 4.2:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Proxy 4.2:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Proxy 4.2:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Proxy 4.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Proxy 4.2:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Proxy 4.2:openssl-1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Server 4.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Manager Server 4.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.s390x",
            "SUSE Manager Server 4.2:libopenssl-1_1-devel-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Server 4.2:libopenssl-1_1-devel-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Server 4.2:libopenssl1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Manager Server 4.2:libopenssl1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Manager Server 4.2:libopenssl1_1-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Server 4.2:libopenssl1_1-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Server 4.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Manager Server 4.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.s390x",
            "SUSE Manager Server 4.2:libopenssl1_1-hmac-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Server 4.2:libopenssl1_1-hmac-32bit-1.1.1d-150200.11.62.1.x86_64",
            "SUSE Manager Server 4.2:openssl-1_1-1.1.1d-150200.11.62.1.ppc64le",
            "SUSE Manager Server 4.2:openssl-1_1-1.1.1d-150200.11.62.1.s390x",
            "SUSE Manager Server 4.2:openssl-1_1-1.1.1d-150200.11.62.1.x86_64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "date": "2023-04-06T13:36:45Z",
          "details": "low"
        }
      ],
      "title": "CVE-2023-0466"
    }
  ]
}

{
  "document": {
    "aggregate_severity": {
      "namespace": "https://www.suse.com/support/security/rating/",
      "text": "moderate"
    },
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Copyright 2024 SUSE LLC. All rights reserved.",
      "tlp": {
        "label": "WHITE",
        "url": "https://www.first.org/tlp/"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "Security update for openssl-1_1",
        "title": "Title of the patch"
      },
      {
        "category": "description",
        "text": "This update for openssl-1_1 fixes the following issues:\n\n- CVE-2023-0464: Fixed excessive Resource Usage Verifying X.509 Policy Constraints (bsc#1209624).\n",
        "title": "Description of the patch"
      },
      {
        "category": "details",
        "text": "SUSE-2023-1747,SUSE-OpenStack-Cloud-9-2023-1747,SUSE-OpenStack-Cloud-Crowbar-9-2023-1747,SUSE-SLE-SAP-12-SP4-2023-1747,SUSE-SLE-SDK-12-SP5-2023-1747,SUSE-SLE-SERVER-12-SP4-ESPOS-2023-1747,SUSE-SLE-SERVER-12-SP4-LTSS-2023-1747,SUSE-SLE-SERVER-12-SP5-2023-1747",
        "title": "Patchnames"
      },
      {
        "category": "legal_disclaimer",
        "text": "CSAF 2.0 data is provided by SUSE under the Creative Commons License 4.0 with Attribution (CC-BY-4.0).",
        "title": "Terms of use"
      }
    ],
    "publisher": {
      "category": "vendor",
      "contact_details": "https://www.suse.com/support/security/contact/",
      "name": "SUSE Product Security Team",
      "namespace": "https://www.suse.com/"
    },
    "references": [
      {
        "category": "external",
        "summary": "SUSE ratings",
        "url": "https://www.suse.com/support/security/rating/"
      },
      {
        "category": "self",
        "summary": "URL of this CSAF notice",
        "url": "https://ftp.suse.com/pub/projects/security/csaf/suse-su-2023_1747-1.json"
      },
      {
        "category": "self",
        "summary": "URL for SUSE-SU-2023:1747-1",
        "url": "https://www.suse.com/support/update/announcement/2023/suse-su-20231747-1/"
      },
      {
        "category": "self",
        "summary": "E-Mail link for SUSE-SU-2023:1747-1",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2023-April/014353.html"
      },
      {
        "category": "self",
        "summary": "SUSE Bug 1209624",
        "url": "https://bugzilla.suse.com/1209624"
      },
      {
        "category": "self",
        "summary": "SUSE CVE CVE-2023-0464 page",
        "url": "https://www.suse.com/security/cve/CVE-2023-0464/"
      }
    ],
    "title": "Security update for openssl-1_1",
    "tracking": {
      "current_release_date": "2023-04-04T07:06:38Z",
      "generator": {
        "date": "2023-04-04T07:06:38Z",
        "engine": {
          "name": "cve-database.git:bin/generate-csaf.pl",
          "version": "1"
        }
      },
      "id": "SUSE-SU-2023:1747-1",
      "initial_release_date": "2023-04-04T07:06:38Z",
      "revision_history": [
        {
          "date": "2023-04-04T07:06:38Z",
          "number": "1",
          "summary": "Current version"
        }
      ],
      "status": "final",
      "version": "1"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-1_1-devel-1.1.1d-2.78.1.aarch64",
                "product": {
                  "name": "libopenssl-1_1-devel-1.1.1d-2.78.1.aarch64",
                  "product_id": "libopenssl-1_1-devel-1.1.1d-2.78.1.aarch64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-1.1.1d-2.78.1.aarch64",
                "product": {
                  "name": "libopenssl1_1-1.1.1d-2.78.1.aarch64",
                  "product_id": "libopenssl1_1-1.1.1d-2.78.1.aarch64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-hmac-1.1.1d-2.78.1.aarch64",
                "product": {
                  "name": "libopenssl1_1-hmac-1.1.1d-2.78.1.aarch64",
                  "product_id": "libopenssl1_1-hmac-1.1.1d-2.78.1.aarch64"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-1_1-1.1.1d-2.78.1.aarch64",
                "product": {
                  "name": "openssl-1_1-1.1.1d-2.78.1.aarch64",
                  "product_id": "openssl-1_1-1.1.1d-2.78.1.aarch64"
                }
              }
            ],
            "category": "architecture",
            "name": "aarch64"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-1_1-devel-64bit-1.1.1d-2.78.1.aarch64_ilp32",
                "product": {
                  "name": "libopenssl-1_1-devel-64bit-1.1.1d-2.78.1.aarch64_ilp32",
                  "product_id": "libopenssl-1_1-devel-64bit-1.1.1d-2.78.1.aarch64_ilp32"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-64bit-1.1.1d-2.78.1.aarch64_ilp32",
                "product": {
                  "name": "libopenssl1_1-64bit-1.1.1d-2.78.1.aarch64_ilp32",
                  "product_id": "libopenssl1_1-64bit-1.1.1d-2.78.1.aarch64_ilp32"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-hmac-64bit-1.1.1d-2.78.1.aarch64_ilp32",
                "product": {
                  "name": "libopenssl1_1-hmac-64bit-1.1.1d-2.78.1.aarch64_ilp32",
                  "product_id": "libopenssl1_1-hmac-64bit-1.1.1d-2.78.1.aarch64_ilp32"
                }
              }
            ],
            "category": "architecture",
            "name": "aarch64_ilp32"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-1_1-devel-1.1.1d-2.78.1.i586",
                "product": {
                  "name": "libopenssl-1_1-devel-1.1.1d-2.78.1.i586",
                  "product_id": "libopenssl-1_1-devel-1.1.1d-2.78.1.i586"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-1.1.1d-2.78.1.i586",
                "product": {
                  "name": "libopenssl1_1-1.1.1d-2.78.1.i586",
                  "product_id": "libopenssl1_1-1.1.1d-2.78.1.i586"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-hmac-1.1.1d-2.78.1.i586",
                "product": {
                  "name": "libopenssl1_1-hmac-1.1.1d-2.78.1.i586",
                  "product_id": "libopenssl1_1-hmac-1.1.1d-2.78.1.i586"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-1_1-1.1.1d-2.78.1.i586",
                "product": {
                  "name": "openssl-1_1-1.1.1d-2.78.1.i586",
                  "product_id": "openssl-1_1-1.1.1d-2.78.1.i586"
                }
              }
            ],
            "category": "architecture",
            "name": "i586"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "openssl-1_1-doc-1.1.1d-2.78.1.noarch",
                "product": {
                  "name": "openssl-1_1-doc-1.1.1d-2.78.1.noarch",
                  "product_id": "openssl-1_1-doc-1.1.1d-2.78.1.noarch"
                }
              }
            ],
            "category": "architecture",
            "name": "noarch"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-1_1-devel-1.1.1d-2.78.1.ppc64le",
                "product": {
                  "name": "libopenssl-1_1-devel-1.1.1d-2.78.1.ppc64le",
                  "product_id": "libopenssl-1_1-devel-1.1.1d-2.78.1.ppc64le"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-1.1.1d-2.78.1.ppc64le",
                "product": {
                  "name": "libopenssl1_1-1.1.1d-2.78.1.ppc64le",
                  "product_id": "libopenssl1_1-1.1.1d-2.78.1.ppc64le"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-hmac-1.1.1d-2.78.1.ppc64le",
                "product": {
                  "name": "libopenssl1_1-hmac-1.1.1d-2.78.1.ppc64le",
                  "product_id": "libopenssl1_1-hmac-1.1.1d-2.78.1.ppc64le"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-1_1-1.1.1d-2.78.1.ppc64le",
                "product": {
                  "name": "openssl-1_1-1.1.1d-2.78.1.ppc64le",
                  "product_id": "openssl-1_1-1.1.1d-2.78.1.ppc64le"
                }
              }
            ],
            "category": "architecture",
            "name": "ppc64le"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-1_1-devel-1.1.1d-2.78.1.s390",
                "product": {
                  "name": "libopenssl-1_1-devel-1.1.1d-2.78.1.s390",
                  "product_id": "libopenssl-1_1-devel-1.1.1d-2.78.1.s390"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-1.1.1d-2.78.1.s390",
                "product": {
                  "name": "libopenssl1_1-1.1.1d-2.78.1.s390",
                  "product_id": "libopenssl1_1-1.1.1d-2.78.1.s390"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-hmac-1.1.1d-2.78.1.s390",
                "product": {
                  "name": "libopenssl1_1-hmac-1.1.1d-2.78.1.s390",
                  "product_id": "libopenssl1_1-hmac-1.1.1d-2.78.1.s390"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-1_1-1.1.1d-2.78.1.s390",
                "product": {
                  "name": "openssl-1_1-1.1.1d-2.78.1.s390",
                  "product_id": "openssl-1_1-1.1.1d-2.78.1.s390"
                }
              }
            ],
            "category": "architecture",
            "name": "s390"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-1_1-devel-1.1.1d-2.78.1.s390x",
                "product": {
                  "name": "libopenssl-1_1-devel-1.1.1d-2.78.1.s390x",
                  "product_id": "libopenssl-1_1-devel-1.1.1d-2.78.1.s390x"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl-1_1-devel-32bit-1.1.1d-2.78.1.s390x",
                "product": {
                  "name": "libopenssl-1_1-devel-32bit-1.1.1d-2.78.1.s390x",
                  "product_id": "libopenssl-1_1-devel-32bit-1.1.1d-2.78.1.s390x"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-1.1.1d-2.78.1.s390x",
                "product": {
                  "name": "libopenssl1_1-1.1.1d-2.78.1.s390x",
                  "product_id": "libopenssl1_1-1.1.1d-2.78.1.s390x"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-32bit-1.1.1d-2.78.1.s390x",
                "product": {
                  "name": "libopenssl1_1-32bit-1.1.1d-2.78.1.s390x",
                  "product_id": "libopenssl1_1-32bit-1.1.1d-2.78.1.s390x"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-hmac-1.1.1d-2.78.1.s390x",
                "product": {
                  "name": "libopenssl1_1-hmac-1.1.1d-2.78.1.s390x",
                  "product_id": "libopenssl1_1-hmac-1.1.1d-2.78.1.s390x"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.s390x",
                "product": {
                  "name": "libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.s390x",
                  "product_id": "libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.s390x"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-1_1-1.1.1d-2.78.1.s390x",
                "product": {
                  "name": "openssl-1_1-1.1.1d-2.78.1.s390x",
                  "product_id": "openssl-1_1-1.1.1d-2.78.1.s390x"
                }
              }
            ],
            "category": "architecture",
            "name": "s390x"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-1_1-devel-1.1.1d-2.78.1.x86_64",
                "product": {
                  "name": "libopenssl-1_1-devel-1.1.1d-2.78.1.x86_64",
                  "product_id": "libopenssl-1_1-devel-1.1.1d-2.78.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl-1_1-devel-32bit-1.1.1d-2.78.1.x86_64",
                "product": {
                  "name": "libopenssl-1_1-devel-32bit-1.1.1d-2.78.1.x86_64",
                  "product_id": "libopenssl-1_1-devel-32bit-1.1.1d-2.78.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-1.1.1d-2.78.1.x86_64",
                "product": {
                  "name": "libopenssl1_1-1.1.1d-2.78.1.x86_64",
                  "product_id": "libopenssl1_1-1.1.1d-2.78.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-32bit-1.1.1d-2.78.1.x86_64",
                "product": {
                  "name": "libopenssl1_1-32bit-1.1.1d-2.78.1.x86_64",
                  "product_id": "libopenssl1_1-32bit-1.1.1d-2.78.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-hmac-1.1.1d-2.78.1.x86_64",
                "product": {
                  "name": "libopenssl1_1-hmac-1.1.1d-2.78.1.x86_64",
                  "product_id": "libopenssl1_1-hmac-1.1.1d-2.78.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.x86_64",
                "product": {
                  "name": "libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.x86_64",
                  "product_id": "libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-1_1-1.1.1d-2.78.1.x86_64",
                "product": {
                  "name": "openssl-1_1-1.1.1d-2.78.1.x86_64",
                  "product_id": "openssl-1_1-1.1.1d-2.78.1.x86_64"
                }
              }
            ],
            "category": "architecture",
            "name": "x86_64"
          },
          {
            "branches": [
              {
                "category": "product_name",
                "name": "SUSE OpenStack Cloud 9",
                "product": {
                  "name": "SUSE OpenStack Cloud 9",
                  "product_id": "SUSE OpenStack Cloud 9",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:suse-openstack-cloud:9"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "SUSE OpenStack Cloud Crowbar 9",
                "product": {
                  "name": "SUSE OpenStack Cloud Crowbar 9",
                  "product_id": "SUSE OpenStack Cloud Crowbar 9",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:suse-openstack-cloud-crowbar:9"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "SUSE Linux Enterprise Server for SAP Applications 12 SP4",
                "product": {
                  "name": "SUSE Linux Enterprise Server for SAP Applications 12 SP4",
                  "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP4",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:sles_sap:12:sp4"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "SUSE Linux Enterprise Software Development Kit 12 SP5",
                "product": {
                  "name": "SUSE Linux Enterprise Software Development Kit 12 SP5",
                  "product_id": "SUSE Linux Enterprise Software Development Kit 12 SP5",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:sle-sdk:12:sp5"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "SUSE Linux Enterprise Server 12 SP4-ESPOS",
                "product": {
                  "name": "SUSE Linux Enterprise Server 12 SP4-ESPOS",
                  "product_id": "SUSE Linux Enterprise Server 12 SP4-ESPOS",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:sles-espos:12:sp4"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "SUSE Linux Enterprise Server 12 SP4-LTSS",
                "product": {
                  "name": "SUSE Linux Enterprise Server 12 SP4-LTSS",
                  "product_id": "SUSE Linux Enterprise Server 12 SP4-LTSS",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:sles-ltss:12:sp4"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "SUSE Linux Enterprise Server 12 SP5",
                "product": {
                  "name": "SUSE Linux Enterprise Server 12 SP5",
                  "product_id": "SUSE Linux Enterprise Server 12 SP5",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:sles:12:sp5"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "SUSE Linux Enterprise Server for SAP Applications 12 SP5",
                "product": {
                  "name": "SUSE Linux Enterprise Server for SAP Applications 12 SP5",
                  "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP5",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:sles_sap:12:sp5"
                  }
                }
              }
            ],
            "category": "product_family",
            "name": "SUSE Linux Enterprise"
          }
        ],
        "category": "vendor",
        "name": "SUSE"
      }
    ],
    "relationships": [
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1d-2.78.1.x86_64 as component of SUSE OpenStack Cloud 9",
          "product_id": "SUSE OpenStack Cloud 9:libopenssl1_1-1.1.1d-2.78.1.x86_64"
        },
        "product_reference": "libopenssl1_1-1.1.1d-2.78.1.x86_64",
        "relates_to_product_reference": "SUSE OpenStack Cloud 9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-32bit-1.1.1d-2.78.1.x86_64 as component of SUSE OpenStack Cloud 9",
          "product_id": "SUSE OpenStack Cloud 9:libopenssl1_1-32bit-1.1.1d-2.78.1.x86_64"
        },
        "product_reference": "libopenssl1_1-32bit-1.1.1d-2.78.1.x86_64",
        "relates_to_product_reference": "SUSE OpenStack Cloud 9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1d-2.78.1.x86_64 as component of SUSE OpenStack Cloud 9",
          "product_id": "SUSE OpenStack Cloud 9:libopenssl1_1-hmac-1.1.1d-2.78.1.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1d-2.78.1.x86_64",
        "relates_to_product_reference": "SUSE OpenStack Cloud 9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.x86_64 as component of SUSE OpenStack Cloud 9",
          "product_id": "SUSE OpenStack Cloud 9:libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.x86_64",
        "relates_to_product_reference": "SUSE OpenStack Cloud 9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1d-2.78.1.x86_64 as component of SUSE OpenStack Cloud 9",
          "product_id": "SUSE OpenStack Cloud 9:openssl-1_1-1.1.1d-2.78.1.x86_64"
        },
        "product_reference": "openssl-1_1-1.1.1d-2.78.1.x86_64",
        "relates_to_product_reference": "SUSE OpenStack Cloud 9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1d-2.78.1.x86_64 as component of SUSE OpenStack Cloud Crowbar 9",
          "product_id": "SUSE OpenStack Cloud Crowbar 9:libopenssl1_1-1.1.1d-2.78.1.x86_64"
        },
        "product_reference": "libopenssl1_1-1.1.1d-2.78.1.x86_64",
        "relates_to_product_reference": "SUSE OpenStack Cloud Crowbar 9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-32bit-1.1.1d-2.78.1.x86_64 as component of SUSE OpenStack Cloud Crowbar 9",
          "product_id": "SUSE OpenStack Cloud Crowbar 9:libopenssl1_1-32bit-1.1.1d-2.78.1.x86_64"
        },
        "product_reference": "libopenssl1_1-32bit-1.1.1d-2.78.1.x86_64",
        "relates_to_product_reference": "SUSE OpenStack Cloud Crowbar 9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1d-2.78.1.x86_64 as component of SUSE OpenStack Cloud Crowbar 9",
          "product_id": "SUSE OpenStack Cloud Crowbar 9:libopenssl1_1-hmac-1.1.1d-2.78.1.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1d-2.78.1.x86_64",
        "relates_to_product_reference": "SUSE OpenStack Cloud Crowbar 9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.x86_64 as component of SUSE OpenStack Cloud Crowbar 9",
          "product_id": "SUSE OpenStack Cloud Crowbar 9:libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.x86_64",
        "relates_to_product_reference": "SUSE OpenStack Cloud Crowbar 9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1d-2.78.1.x86_64 as component of SUSE OpenStack Cloud Crowbar 9",
          "product_id": "SUSE OpenStack Cloud Crowbar 9:openssl-1_1-1.1.1d-2.78.1.x86_64"
        },
        "product_reference": "openssl-1_1-1.1.1d-2.78.1.x86_64",
        "relates_to_product_reference": "SUSE OpenStack Cloud Crowbar 9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1d-2.78.1.ppc64le as component of SUSE Linux Enterprise Server for SAP Applications 12 SP4",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl1_1-1.1.1d-2.78.1.ppc64le"
        },
        "product_reference": "libopenssl1_1-1.1.1d-2.78.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1d-2.78.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 12 SP4",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl1_1-1.1.1d-2.78.1.x86_64"
        },
        "product_reference": "libopenssl1_1-1.1.1d-2.78.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-32bit-1.1.1d-2.78.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 12 SP4",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl1_1-32bit-1.1.1d-2.78.1.x86_64"
        },
        "product_reference": "libopenssl1_1-32bit-1.1.1d-2.78.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1d-2.78.1.ppc64le as component of SUSE Linux Enterprise Server for SAP Applications 12 SP4",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl1_1-hmac-1.1.1d-2.78.1.ppc64le"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1d-2.78.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1d-2.78.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 12 SP4",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl1_1-hmac-1.1.1d-2.78.1.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1d-2.78.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 12 SP4",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1d-2.78.1.ppc64le as component of SUSE Linux Enterprise Server for SAP Applications 12 SP4",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP4:openssl-1_1-1.1.1d-2.78.1.ppc64le"
        },
        "product_reference": "openssl-1_1-1.1.1d-2.78.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1d-2.78.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 12 SP4",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP4:openssl-1_1-1.1.1d-2.78.1.x86_64"
        },
        "product_reference": "openssl-1_1-1.1.1d-2.78.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1d-2.78.1.aarch64 as component of SUSE Linux Enterprise Software Development Kit 12 SP5",
          "product_id": "SUSE Linux Enterprise Software Development Kit 12 SP5:libopenssl-1_1-devel-1.1.1d-2.78.1.aarch64"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1d-2.78.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Software Development Kit 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1d-2.78.1.ppc64le as component of SUSE Linux Enterprise Software Development Kit 12 SP5",
          "product_id": "SUSE Linux Enterprise Software Development Kit 12 SP5:libopenssl-1_1-devel-1.1.1d-2.78.1.ppc64le"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1d-2.78.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Software Development Kit 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1d-2.78.1.s390x as component of SUSE Linux Enterprise Software Development Kit 12 SP5",
          "product_id": "SUSE Linux Enterprise Software Development Kit 12 SP5:libopenssl-1_1-devel-1.1.1d-2.78.1.s390x"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1d-2.78.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Software Development Kit 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1d-2.78.1.x86_64 as component of SUSE Linux Enterprise Software Development Kit 12 SP5",
          "product_id": "SUSE Linux Enterprise Software Development Kit 12 SP5:libopenssl-1_1-devel-1.1.1d-2.78.1.x86_64"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1d-2.78.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Software Development Kit 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-32bit-1.1.1d-2.78.1.s390x as component of SUSE Linux Enterprise Software Development Kit 12 SP5",
          "product_id": "SUSE Linux Enterprise Software Development Kit 12 SP5:libopenssl-1_1-devel-32bit-1.1.1d-2.78.1.s390x"
        },
        "product_reference": "libopenssl-1_1-devel-32bit-1.1.1d-2.78.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Software Development Kit 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-32bit-1.1.1d-2.78.1.x86_64 as component of SUSE Linux Enterprise Software Development Kit 12 SP5",
          "product_id": "SUSE Linux Enterprise Software Development Kit 12 SP5:libopenssl-1_1-devel-32bit-1.1.1d-2.78.1.x86_64"
        },
        "product_reference": "libopenssl-1_1-devel-32bit-1.1.1d-2.78.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Software Development Kit 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1d-2.78.1.aarch64 as component of SUSE Linux Enterprise Server 12 SP4-ESPOS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl1_1-1.1.1d-2.78.1.aarch64"
        },
        "product_reference": "libopenssl1_1-1.1.1d-2.78.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-ESPOS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1d-2.78.1.x86_64 as component of SUSE Linux Enterprise Server 12 SP4-ESPOS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl1_1-1.1.1d-2.78.1.x86_64"
        },
        "product_reference": "libopenssl1_1-1.1.1d-2.78.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-ESPOS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-32bit-1.1.1d-2.78.1.x86_64 as component of SUSE Linux Enterprise Server 12 SP4-ESPOS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl1_1-32bit-1.1.1d-2.78.1.x86_64"
        },
        "product_reference": "libopenssl1_1-32bit-1.1.1d-2.78.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-ESPOS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1d-2.78.1.aarch64 as component of SUSE Linux Enterprise Server 12 SP4-ESPOS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl1_1-hmac-1.1.1d-2.78.1.aarch64"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1d-2.78.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-ESPOS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1d-2.78.1.x86_64 as component of SUSE Linux Enterprise Server 12 SP4-ESPOS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl1_1-hmac-1.1.1d-2.78.1.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1d-2.78.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-ESPOS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.x86_64 as component of SUSE Linux Enterprise Server 12 SP4-ESPOS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-ESPOS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1d-2.78.1.aarch64 as component of SUSE Linux Enterprise Server 12 SP4-ESPOS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-ESPOS:openssl-1_1-1.1.1d-2.78.1.aarch64"
        },
        "product_reference": "openssl-1_1-1.1.1d-2.78.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-ESPOS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1d-2.78.1.x86_64 as component of SUSE Linux Enterprise Server 12 SP4-ESPOS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-ESPOS:openssl-1_1-1.1.1d-2.78.1.x86_64"
        },
        "product_reference": "openssl-1_1-1.1.1d-2.78.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-ESPOS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1d-2.78.1.aarch64 as component of SUSE Linux Enterprise Server 12 SP4-LTSS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_1-1.1.1d-2.78.1.aarch64"
        },
        "product_reference": "libopenssl1_1-1.1.1d-2.78.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1d-2.78.1.ppc64le as component of SUSE Linux Enterprise Server 12 SP4-LTSS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_1-1.1.1d-2.78.1.ppc64le"
        },
        "product_reference": "libopenssl1_1-1.1.1d-2.78.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1d-2.78.1.s390x as component of SUSE Linux Enterprise Server 12 SP4-LTSS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_1-1.1.1d-2.78.1.s390x"
        },
        "product_reference": "libopenssl1_1-1.1.1d-2.78.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1d-2.78.1.x86_64 as component of SUSE Linux Enterprise Server 12 SP4-LTSS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_1-1.1.1d-2.78.1.x86_64"
        },
        "product_reference": "libopenssl1_1-1.1.1d-2.78.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-32bit-1.1.1d-2.78.1.s390x as component of SUSE Linux Enterprise Server 12 SP4-LTSS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_1-32bit-1.1.1d-2.78.1.s390x"
        },
        "product_reference": "libopenssl1_1-32bit-1.1.1d-2.78.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-32bit-1.1.1d-2.78.1.x86_64 as component of SUSE Linux Enterprise Server 12 SP4-LTSS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_1-32bit-1.1.1d-2.78.1.x86_64"
        },
        "product_reference": "libopenssl1_1-32bit-1.1.1d-2.78.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1d-2.78.1.aarch64 as component of SUSE Linux Enterprise Server 12 SP4-LTSS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_1-hmac-1.1.1d-2.78.1.aarch64"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1d-2.78.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1d-2.78.1.ppc64le as component of SUSE Linux Enterprise Server 12 SP4-LTSS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_1-hmac-1.1.1d-2.78.1.ppc64le"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1d-2.78.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1d-2.78.1.s390x as component of SUSE Linux Enterprise Server 12 SP4-LTSS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_1-hmac-1.1.1d-2.78.1.s390x"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1d-2.78.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1d-2.78.1.x86_64 as component of SUSE Linux Enterprise Server 12 SP4-LTSS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_1-hmac-1.1.1d-2.78.1.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1d-2.78.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.s390x as component of SUSE Linux Enterprise Server 12 SP4-LTSS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.s390x"
        },
        "product_reference": "libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.x86_64 as component of SUSE Linux Enterprise Server 12 SP4-LTSS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1d-2.78.1.aarch64 as component of SUSE Linux Enterprise Server 12 SP4-LTSS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-LTSS:openssl-1_1-1.1.1d-2.78.1.aarch64"
        },
        "product_reference": "openssl-1_1-1.1.1d-2.78.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1d-2.78.1.ppc64le as component of SUSE Linux Enterprise Server 12 SP4-LTSS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-LTSS:openssl-1_1-1.1.1d-2.78.1.ppc64le"
        },
        "product_reference": "openssl-1_1-1.1.1d-2.78.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1d-2.78.1.s390x as component of SUSE Linux Enterprise Server 12 SP4-LTSS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-LTSS:openssl-1_1-1.1.1d-2.78.1.s390x"
        },
        "product_reference": "openssl-1_1-1.1.1d-2.78.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1d-2.78.1.x86_64 as component of SUSE Linux Enterprise Server 12 SP4-LTSS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-LTSS:openssl-1_1-1.1.1d-2.78.1.x86_64"
        },
        "product_reference": "openssl-1_1-1.1.1d-2.78.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1d-2.78.1.aarch64 as component of SUSE Linux Enterprise Server 12 SP5",
          "product_id": "SUSE Linux Enterprise Server 12 SP5:libopenssl1_1-1.1.1d-2.78.1.aarch64"
        },
        "product_reference": "libopenssl1_1-1.1.1d-2.78.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1d-2.78.1.ppc64le as component of SUSE Linux Enterprise Server 12 SP5",
          "product_id": "SUSE Linux Enterprise Server 12 SP5:libopenssl1_1-1.1.1d-2.78.1.ppc64le"
        },
        "product_reference": "libopenssl1_1-1.1.1d-2.78.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1d-2.78.1.s390x as component of SUSE Linux Enterprise Server 12 SP5",
          "product_id": "SUSE Linux Enterprise Server 12 SP5:libopenssl1_1-1.1.1d-2.78.1.s390x"
        },
        "product_reference": "libopenssl1_1-1.1.1d-2.78.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1d-2.78.1.x86_64 as component of SUSE Linux Enterprise Server 12 SP5",
          "product_id": "SUSE Linux Enterprise Server 12 SP5:libopenssl1_1-1.1.1d-2.78.1.x86_64"
        },
        "product_reference": "libopenssl1_1-1.1.1d-2.78.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-32bit-1.1.1d-2.78.1.s390x as component of SUSE Linux Enterprise Server 12 SP5",
          "product_id": "SUSE Linux Enterprise Server 12 SP5:libopenssl1_1-32bit-1.1.1d-2.78.1.s390x"
        },
        "product_reference": "libopenssl1_1-32bit-1.1.1d-2.78.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-32bit-1.1.1d-2.78.1.x86_64 as component of SUSE Linux Enterprise Server 12 SP5",
          "product_id": "SUSE Linux Enterprise Server 12 SP5:libopenssl1_1-32bit-1.1.1d-2.78.1.x86_64"
        },
        "product_reference": "libopenssl1_1-32bit-1.1.1d-2.78.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1d-2.78.1.aarch64 as component of SUSE Linux Enterprise Server 12 SP5",
          "product_id": "SUSE Linux Enterprise Server 12 SP5:libopenssl1_1-hmac-1.1.1d-2.78.1.aarch64"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1d-2.78.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1d-2.78.1.ppc64le as component of SUSE Linux Enterprise Server 12 SP5",
          "product_id": "SUSE Linux Enterprise Server 12 SP5:libopenssl1_1-hmac-1.1.1d-2.78.1.ppc64le"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1d-2.78.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1d-2.78.1.s390x as component of SUSE Linux Enterprise Server 12 SP5",
          "product_id": "SUSE Linux Enterprise Server 12 SP5:libopenssl1_1-hmac-1.1.1d-2.78.1.s390x"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1d-2.78.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1d-2.78.1.x86_64 as component of SUSE Linux Enterprise Server 12 SP5",
          "product_id": "SUSE Linux Enterprise Server 12 SP5:libopenssl1_1-hmac-1.1.1d-2.78.1.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1d-2.78.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.s390x as component of SUSE Linux Enterprise Server 12 SP5",
          "product_id": "SUSE Linux Enterprise Server 12 SP5:libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.s390x"
        },
        "product_reference": "libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.x86_64 as component of SUSE Linux Enterprise Server 12 SP5",
          "product_id": "SUSE Linux Enterprise Server 12 SP5:libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1d-2.78.1.aarch64 as component of SUSE Linux Enterprise Server 12 SP5",
          "product_id": "SUSE Linux Enterprise Server 12 SP5:openssl-1_1-1.1.1d-2.78.1.aarch64"
        },
        "product_reference": "openssl-1_1-1.1.1d-2.78.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1d-2.78.1.ppc64le as component of SUSE Linux Enterprise Server 12 SP5",
          "product_id": "SUSE Linux Enterprise Server 12 SP5:openssl-1_1-1.1.1d-2.78.1.ppc64le"
        },
        "product_reference": "openssl-1_1-1.1.1d-2.78.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1d-2.78.1.s390x as component of SUSE Linux Enterprise Server 12 SP5",
          "product_id": "SUSE Linux Enterprise Server 12 SP5:openssl-1_1-1.1.1d-2.78.1.s390x"
        },
        "product_reference": "openssl-1_1-1.1.1d-2.78.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1d-2.78.1.x86_64 as component of SUSE Linux Enterprise Server 12 SP5",
          "product_id": "SUSE Linux Enterprise Server 12 SP5:openssl-1_1-1.1.1d-2.78.1.x86_64"
        },
        "product_reference": "openssl-1_1-1.1.1d-2.78.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1d-2.78.1.aarch64 as component of SUSE Linux Enterprise Server for SAP Applications 12 SP5",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_1-1.1.1d-2.78.1.aarch64"
        },
        "product_reference": "libopenssl1_1-1.1.1d-2.78.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1d-2.78.1.ppc64le as component of SUSE Linux Enterprise Server for SAP Applications 12 SP5",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_1-1.1.1d-2.78.1.ppc64le"
        },
        "product_reference": "libopenssl1_1-1.1.1d-2.78.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1d-2.78.1.s390x as component of SUSE Linux Enterprise Server for SAP Applications 12 SP5",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_1-1.1.1d-2.78.1.s390x"
        },
        "product_reference": "libopenssl1_1-1.1.1d-2.78.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1d-2.78.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 12 SP5",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_1-1.1.1d-2.78.1.x86_64"
        },
        "product_reference": "libopenssl1_1-1.1.1d-2.78.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-32bit-1.1.1d-2.78.1.s390x as component of SUSE Linux Enterprise Server for SAP Applications 12 SP5",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_1-32bit-1.1.1d-2.78.1.s390x"
        },
        "product_reference": "libopenssl1_1-32bit-1.1.1d-2.78.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-32bit-1.1.1d-2.78.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 12 SP5",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_1-32bit-1.1.1d-2.78.1.x86_64"
        },
        "product_reference": "libopenssl1_1-32bit-1.1.1d-2.78.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1d-2.78.1.aarch64 as component of SUSE Linux Enterprise Server for SAP Applications 12 SP5",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_1-hmac-1.1.1d-2.78.1.aarch64"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1d-2.78.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1d-2.78.1.ppc64le as component of SUSE Linux Enterprise Server for SAP Applications 12 SP5",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_1-hmac-1.1.1d-2.78.1.ppc64le"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1d-2.78.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1d-2.78.1.s390x as component of SUSE Linux Enterprise Server for SAP Applications 12 SP5",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_1-hmac-1.1.1d-2.78.1.s390x"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1d-2.78.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1d-2.78.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 12 SP5",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_1-hmac-1.1.1d-2.78.1.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1d-2.78.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.s390x as component of SUSE Linux Enterprise Server for SAP Applications 12 SP5",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.s390x"
        },
        "product_reference": "libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 12 SP5",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1d-2.78.1.aarch64 as component of SUSE Linux Enterprise Server for SAP Applications 12 SP5",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP5:openssl-1_1-1.1.1d-2.78.1.aarch64"
        },
        "product_reference": "openssl-1_1-1.1.1d-2.78.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1d-2.78.1.ppc64le as component of SUSE Linux Enterprise Server for SAP Applications 12 SP5",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP5:openssl-1_1-1.1.1d-2.78.1.ppc64le"
        },
        "product_reference": "openssl-1_1-1.1.1d-2.78.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1d-2.78.1.s390x as component of SUSE Linux Enterprise Server for SAP Applications 12 SP5",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP5:openssl-1_1-1.1.1d-2.78.1.s390x"
        },
        "product_reference": "openssl-1_1-1.1.1d-2.78.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1d-2.78.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 12 SP5",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP5:openssl-1_1-1.1.1d-2.78.1.x86_64"
        },
        "product_reference": "openssl-1_1-1.1.1d-2.78.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP5"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2023-0464",
      "ids": [
        {
          "system_name": "SUSE CVE Page",
          "text": "https://www.suse.com/security/cve/CVE-2023-0464"
        }
      ],
      "notes": [
        {
          "category": "general",
          "text": "A security vulnerability has been identified in all supported versions\n\nof OpenSSL related to the verification of X.509 certificate chains\nthat include policy constraints.  Attackers may be able to exploit this\nvulnerability by creating a malicious certificate chain that triggers\nexponential use of computational resources, leading to a denial-of-service\n(DoS) attack on affected systems.\n\nPolicy processing is disabled by default but can be enabled by passing\nthe `-policy\u0027 argument to the command line utilities or by calling the\n`X509_VERIFY_PARAM_set1_policies()\u0027 function.",
          "title": "CVE description"
        }
      ],
      "product_status": {
        "recommended": [
          "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl1_1-1.1.1d-2.78.1.aarch64",
          "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl1_1-1.1.1d-2.78.1.x86_64",
          "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl1_1-32bit-1.1.1d-2.78.1.x86_64",
          "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl1_1-hmac-1.1.1d-2.78.1.aarch64",
          "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl1_1-hmac-1.1.1d-2.78.1.x86_64",
          "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.x86_64",
          "SUSE Linux Enterprise Server 12 SP4-ESPOS:openssl-1_1-1.1.1d-2.78.1.aarch64",
          "SUSE Linux Enterprise Server 12 SP4-ESPOS:openssl-1_1-1.1.1d-2.78.1.x86_64",
          "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_1-1.1.1d-2.78.1.aarch64",
          "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_1-1.1.1d-2.78.1.ppc64le",
          "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_1-1.1.1d-2.78.1.s390x",
          "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_1-1.1.1d-2.78.1.x86_64",
          "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_1-32bit-1.1.1d-2.78.1.s390x",
          "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_1-32bit-1.1.1d-2.78.1.x86_64",
          "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_1-hmac-1.1.1d-2.78.1.aarch64",
          "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_1-hmac-1.1.1d-2.78.1.ppc64le",
          "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_1-hmac-1.1.1d-2.78.1.s390x",
          "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_1-hmac-1.1.1d-2.78.1.x86_64",
          "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.s390x",
          "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.x86_64",
          "SUSE Linux Enterprise Server 12 SP4-LTSS:openssl-1_1-1.1.1d-2.78.1.aarch64",
          "SUSE Linux Enterprise Server 12 SP4-LTSS:openssl-1_1-1.1.1d-2.78.1.ppc64le",
          "SUSE Linux Enterprise Server 12 SP4-LTSS:openssl-1_1-1.1.1d-2.78.1.s390x",
          "SUSE Linux Enterprise Server 12 SP4-LTSS:openssl-1_1-1.1.1d-2.78.1.x86_64",
          "SUSE Linux Enterprise Server 12 SP5:libopenssl1_1-1.1.1d-2.78.1.aarch64",
          "SUSE Linux Enterprise Server 12 SP5:libopenssl1_1-1.1.1d-2.78.1.ppc64le",
          "SUSE Linux Enterprise Server 12 SP5:libopenssl1_1-1.1.1d-2.78.1.s390x",
          "SUSE Linux Enterprise Server 12 SP5:libopenssl1_1-1.1.1d-2.78.1.x86_64",
          "SUSE Linux Enterprise Server 12 SP5:libopenssl1_1-32bit-1.1.1d-2.78.1.s390x",
          "SUSE Linux Enterprise Server 12 SP5:libopenssl1_1-32bit-1.1.1d-2.78.1.x86_64",
          "SUSE Linux Enterprise Server 12 SP5:libopenssl1_1-hmac-1.1.1d-2.78.1.aarch64",
          "SUSE Linux Enterprise Server 12 SP5:libopenssl1_1-hmac-1.1.1d-2.78.1.ppc64le",
          "SUSE Linux Enterprise Server 12 SP5:libopenssl1_1-hmac-1.1.1d-2.78.1.s390x",
          "SUSE Linux Enterprise Server 12 SP5:libopenssl1_1-hmac-1.1.1d-2.78.1.x86_64",
          "SUSE Linux Enterprise Server 12 SP5:libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.s390x",
          "SUSE Linux Enterprise Server 12 SP5:libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.x86_64",
          "SUSE Linux Enterprise Server 12 SP5:openssl-1_1-1.1.1d-2.78.1.aarch64",
          "SUSE Linux Enterprise Server 12 SP5:openssl-1_1-1.1.1d-2.78.1.ppc64le",
          "SUSE Linux Enterprise Server 12 SP5:openssl-1_1-1.1.1d-2.78.1.s390x",
          "SUSE Linux Enterprise Server 12 SP5:openssl-1_1-1.1.1d-2.78.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl1_1-1.1.1d-2.78.1.ppc64le",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl1_1-1.1.1d-2.78.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl1_1-32bit-1.1.1d-2.78.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl1_1-hmac-1.1.1d-2.78.1.ppc64le",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl1_1-hmac-1.1.1d-2.78.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP4:openssl-1_1-1.1.1d-2.78.1.ppc64le",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP4:openssl-1_1-1.1.1d-2.78.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_1-1.1.1d-2.78.1.aarch64",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_1-1.1.1d-2.78.1.ppc64le",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_1-1.1.1d-2.78.1.s390x",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_1-1.1.1d-2.78.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_1-32bit-1.1.1d-2.78.1.s390x",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_1-32bit-1.1.1d-2.78.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_1-hmac-1.1.1d-2.78.1.aarch64",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_1-hmac-1.1.1d-2.78.1.ppc64le",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_1-hmac-1.1.1d-2.78.1.s390x",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_1-hmac-1.1.1d-2.78.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.s390x",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP5:openssl-1_1-1.1.1d-2.78.1.aarch64",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP5:openssl-1_1-1.1.1d-2.78.1.ppc64le",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP5:openssl-1_1-1.1.1d-2.78.1.s390x",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP5:openssl-1_1-1.1.1d-2.78.1.x86_64",
          "SUSE Linux Enterprise Software Development Kit 12 SP5:libopenssl-1_1-devel-1.1.1d-2.78.1.aarch64",
          "SUSE Linux Enterprise Software Development Kit 12 SP5:libopenssl-1_1-devel-1.1.1d-2.78.1.ppc64le",
          "SUSE Linux Enterprise Software Development Kit 12 SP5:libopenssl-1_1-devel-1.1.1d-2.78.1.s390x",
          "SUSE Linux Enterprise Software Development Kit 12 SP5:libopenssl-1_1-devel-1.1.1d-2.78.1.x86_64",
          "SUSE Linux Enterprise Software Development Kit 12 SP5:libopenssl-1_1-devel-32bit-1.1.1d-2.78.1.s390x",
          "SUSE Linux Enterprise Software Development Kit 12 SP5:libopenssl-1_1-devel-32bit-1.1.1d-2.78.1.x86_64",
          "SUSE OpenStack Cloud 9:libopenssl1_1-1.1.1d-2.78.1.x86_64",
          "SUSE OpenStack Cloud 9:libopenssl1_1-32bit-1.1.1d-2.78.1.x86_64",
          "SUSE OpenStack Cloud 9:libopenssl1_1-hmac-1.1.1d-2.78.1.x86_64",
          "SUSE OpenStack Cloud 9:libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.x86_64",
          "SUSE OpenStack Cloud 9:openssl-1_1-1.1.1d-2.78.1.x86_64",
          "SUSE OpenStack Cloud Crowbar 9:libopenssl1_1-1.1.1d-2.78.1.x86_64",
          "SUSE OpenStack Cloud Crowbar 9:libopenssl1_1-32bit-1.1.1d-2.78.1.x86_64",
          "SUSE OpenStack Cloud Crowbar 9:libopenssl1_1-hmac-1.1.1d-2.78.1.x86_64",
          "SUSE OpenStack Cloud Crowbar 9:libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.x86_64",
          "SUSE OpenStack Cloud Crowbar 9:openssl-1_1-1.1.1d-2.78.1.x86_64"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "CVE-2023-0464",
          "url": "https://www.suse.com/security/cve/CVE-2023-0464"
        },
        {
          "category": "external",
          "summary": "SUSE Bug 1209624 for CVE-2023-0464",
          "url": "https://bugzilla.suse.com/1209624"
        },
        {
          "category": "external",
          "summary": "SUSE Bug 1225628 for CVE-2023-0464",
          "url": "https://bugzilla.suse.com/1225628"
        }
      ],
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or \"zypper patch\".\n",
          "product_ids": [
            "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl1_1-1.1.1d-2.78.1.aarch64",
            "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl1_1-1.1.1d-2.78.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl1_1-32bit-1.1.1d-2.78.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl1_1-hmac-1.1.1d-2.78.1.aarch64",
            "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl1_1-hmac-1.1.1d-2.78.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP4-ESPOS:openssl-1_1-1.1.1d-2.78.1.aarch64",
            "SUSE Linux Enterprise Server 12 SP4-ESPOS:openssl-1_1-1.1.1d-2.78.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_1-1.1.1d-2.78.1.aarch64",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_1-1.1.1d-2.78.1.ppc64le",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_1-1.1.1d-2.78.1.s390x",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_1-1.1.1d-2.78.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_1-32bit-1.1.1d-2.78.1.s390x",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_1-32bit-1.1.1d-2.78.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_1-hmac-1.1.1d-2.78.1.aarch64",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_1-hmac-1.1.1d-2.78.1.ppc64le",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_1-hmac-1.1.1d-2.78.1.s390x",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_1-hmac-1.1.1d-2.78.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.s390x",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:openssl-1_1-1.1.1d-2.78.1.aarch64",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:openssl-1_1-1.1.1d-2.78.1.ppc64le",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:openssl-1_1-1.1.1d-2.78.1.s390x",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:openssl-1_1-1.1.1d-2.78.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl1_1-1.1.1d-2.78.1.aarch64",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl1_1-1.1.1d-2.78.1.ppc64le",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl1_1-1.1.1d-2.78.1.s390x",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl1_1-1.1.1d-2.78.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl1_1-32bit-1.1.1d-2.78.1.s390x",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl1_1-32bit-1.1.1d-2.78.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl1_1-hmac-1.1.1d-2.78.1.aarch64",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl1_1-hmac-1.1.1d-2.78.1.ppc64le",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl1_1-hmac-1.1.1d-2.78.1.s390x",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl1_1-hmac-1.1.1d-2.78.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.s390x",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP5:openssl-1_1-1.1.1d-2.78.1.aarch64",
            "SUSE Linux Enterprise Server 12 SP5:openssl-1_1-1.1.1d-2.78.1.ppc64le",
            "SUSE Linux Enterprise Server 12 SP5:openssl-1_1-1.1.1d-2.78.1.s390x",
            "SUSE Linux Enterprise Server 12 SP5:openssl-1_1-1.1.1d-2.78.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl1_1-1.1.1d-2.78.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl1_1-1.1.1d-2.78.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl1_1-32bit-1.1.1d-2.78.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl1_1-hmac-1.1.1d-2.78.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl1_1-hmac-1.1.1d-2.78.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP4:openssl-1_1-1.1.1d-2.78.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP4:openssl-1_1-1.1.1d-2.78.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_1-1.1.1d-2.78.1.aarch64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_1-1.1.1d-2.78.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_1-1.1.1d-2.78.1.s390x",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_1-1.1.1d-2.78.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_1-32bit-1.1.1d-2.78.1.s390x",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_1-32bit-1.1.1d-2.78.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_1-hmac-1.1.1d-2.78.1.aarch64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_1-hmac-1.1.1d-2.78.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_1-hmac-1.1.1d-2.78.1.s390x",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_1-hmac-1.1.1d-2.78.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.s390x",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:openssl-1_1-1.1.1d-2.78.1.aarch64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:openssl-1_1-1.1.1d-2.78.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:openssl-1_1-1.1.1d-2.78.1.s390x",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:openssl-1_1-1.1.1d-2.78.1.x86_64",
            "SUSE Linux Enterprise Software Development Kit 12 SP5:libopenssl-1_1-devel-1.1.1d-2.78.1.aarch64",
            "SUSE Linux Enterprise Software Development Kit 12 SP5:libopenssl-1_1-devel-1.1.1d-2.78.1.ppc64le",
            "SUSE Linux Enterprise Software Development Kit 12 SP5:libopenssl-1_1-devel-1.1.1d-2.78.1.s390x",
            "SUSE Linux Enterprise Software Development Kit 12 SP5:libopenssl-1_1-devel-1.1.1d-2.78.1.x86_64",
            "SUSE Linux Enterprise Software Development Kit 12 SP5:libopenssl-1_1-devel-32bit-1.1.1d-2.78.1.s390x",
            "SUSE Linux Enterprise Software Development Kit 12 SP5:libopenssl-1_1-devel-32bit-1.1.1d-2.78.1.x86_64",
            "SUSE OpenStack Cloud 9:libopenssl1_1-1.1.1d-2.78.1.x86_64",
            "SUSE OpenStack Cloud 9:libopenssl1_1-32bit-1.1.1d-2.78.1.x86_64",
            "SUSE OpenStack Cloud 9:libopenssl1_1-hmac-1.1.1d-2.78.1.x86_64",
            "SUSE OpenStack Cloud 9:libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.x86_64",
            "SUSE OpenStack Cloud 9:openssl-1_1-1.1.1d-2.78.1.x86_64",
            "SUSE OpenStack Cloud Crowbar 9:libopenssl1_1-1.1.1d-2.78.1.x86_64",
            "SUSE OpenStack Cloud Crowbar 9:libopenssl1_1-32bit-1.1.1d-2.78.1.x86_64",
            "SUSE OpenStack Cloud Crowbar 9:libopenssl1_1-hmac-1.1.1d-2.78.1.x86_64",
            "SUSE OpenStack Cloud Crowbar 9:libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.x86_64",
            "SUSE OpenStack Cloud Crowbar 9:openssl-1_1-1.1.1d-2.78.1.x86_64"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl1_1-1.1.1d-2.78.1.aarch64",
            "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl1_1-1.1.1d-2.78.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl1_1-32bit-1.1.1d-2.78.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl1_1-hmac-1.1.1d-2.78.1.aarch64",
            "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl1_1-hmac-1.1.1d-2.78.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP4-ESPOS:openssl-1_1-1.1.1d-2.78.1.aarch64",
            "SUSE Linux Enterprise Server 12 SP4-ESPOS:openssl-1_1-1.1.1d-2.78.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_1-1.1.1d-2.78.1.aarch64",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_1-1.1.1d-2.78.1.ppc64le",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_1-1.1.1d-2.78.1.s390x",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_1-1.1.1d-2.78.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_1-32bit-1.1.1d-2.78.1.s390x",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_1-32bit-1.1.1d-2.78.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_1-hmac-1.1.1d-2.78.1.aarch64",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_1-hmac-1.1.1d-2.78.1.ppc64le",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_1-hmac-1.1.1d-2.78.1.s390x",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_1-hmac-1.1.1d-2.78.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.s390x",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:openssl-1_1-1.1.1d-2.78.1.aarch64",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:openssl-1_1-1.1.1d-2.78.1.ppc64le",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:openssl-1_1-1.1.1d-2.78.1.s390x",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:openssl-1_1-1.1.1d-2.78.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl1_1-1.1.1d-2.78.1.aarch64",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl1_1-1.1.1d-2.78.1.ppc64le",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl1_1-1.1.1d-2.78.1.s390x",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl1_1-1.1.1d-2.78.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl1_1-32bit-1.1.1d-2.78.1.s390x",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl1_1-32bit-1.1.1d-2.78.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl1_1-hmac-1.1.1d-2.78.1.aarch64",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl1_1-hmac-1.1.1d-2.78.1.ppc64le",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl1_1-hmac-1.1.1d-2.78.1.s390x",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl1_1-hmac-1.1.1d-2.78.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.s390x",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP5:openssl-1_1-1.1.1d-2.78.1.aarch64",
            "SUSE Linux Enterprise Server 12 SP5:openssl-1_1-1.1.1d-2.78.1.ppc64le",
            "SUSE Linux Enterprise Server 12 SP5:openssl-1_1-1.1.1d-2.78.1.s390x",
            "SUSE Linux Enterprise Server 12 SP5:openssl-1_1-1.1.1d-2.78.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl1_1-1.1.1d-2.78.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl1_1-1.1.1d-2.78.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl1_1-32bit-1.1.1d-2.78.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl1_1-hmac-1.1.1d-2.78.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl1_1-hmac-1.1.1d-2.78.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP4:openssl-1_1-1.1.1d-2.78.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP4:openssl-1_1-1.1.1d-2.78.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_1-1.1.1d-2.78.1.aarch64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_1-1.1.1d-2.78.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_1-1.1.1d-2.78.1.s390x",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_1-1.1.1d-2.78.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_1-32bit-1.1.1d-2.78.1.s390x",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_1-32bit-1.1.1d-2.78.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_1-hmac-1.1.1d-2.78.1.aarch64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_1-hmac-1.1.1d-2.78.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_1-hmac-1.1.1d-2.78.1.s390x",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_1-hmac-1.1.1d-2.78.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.s390x",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:openssl-1_1-1.1.1d-2.78.1.aarch64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:openssl-1_1-1.1.1d-2.78.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:openssl-1_1-1.1.1d-2.78.1.s390x",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:openssl-1_1-1.1.1d-2.78.1.x86_64",
            "SUSE Linux Enterprise Software Development Kit 12 SP5:libopenssl-1_1-devel-1.1.1d-2.78.1.aarch64",
            "SUSE Linux Enterprise Software Development Kit 12 SP5:libopenssl-1_1-devel-1.1.1d-2.78.1.ppc64le",
            "SUSE Linux Enterprise Software Development Kit 12 SP5:libopenssl-1_1-devel-1.1.1d-2.78.1.s390x",
            "SUSE Linux Enterprise Software Development Kit 12 SP5:libopenssl-1_1-devel-1.1.1d-2.78.1.x86_64",
            "SUSE Linux Enterprise Software Development Kit 12 SP5:libopenssl-1_1-devel-32bit-1.1.1d-2.78.1.s390x",
            "SUSE Linux Enterprise Software Development Kit 12 SP5:libopenssl-1_1-devel-32bit-1.1.1d-2.78.1.x86_64",
            "SUSE OpenStack Cloud 9:libopenssl1_1-1.1.1d-2.78.1.x86_64",
            "SUSE OpenStack Cloud 9:libopenssl1_1-32bit-1.1.1d-2.78.1.x86_64",
            "SUSE OpenStack Cloud 9:libopenssl1_1-hmac-1.1.1d-2.78.1.x86_64",
            "SUSE OpenStack Cloud 9:libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.x86_64",
            "SUSE OpenStack Cloud 9:openssl-1_1-1.1.1d-2.78.1.x86_64",
            "SUSE OpenStack Cloud Crowbar 9:libopenssl1_1-1.1.1d-2.78.1.x86_64",
            "SUSE OpenStack Cloud Crowbar 9:libopenssl1_1-32bit-1.1.1d-2.78.1.x86_64",
            "SUSE OpenStack Cloud Crowbar 9:libopenssl1_1-hmac-1.1.1d-2.78.1.x86_64",
            "SUSE OpenStack Cloud Crowbar 9:libopenssl1_1-hmac-32bit-1.1.1d-2.78.1.x86_64",
            "SUSE OpenStack Cloud Crowbar 9:openssl-1_1-1.1.1d-2.78.1.x86_64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "date": "2023-04-04T07:06:38Z",
          "details": "moderate"
        }
      ],
      "title": "CVE-2023-0464"
    }
  ]
}

{
  "document": {
    "aggregate_severity": {
      "namespace": "https://www.suse.com/support/security/rating/",
      "text": "moderate"
    },
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Copyright 2024 SUSE LLC. All rights reserved.",
      "tlp": {
        "label": "WHITE",
        "url": "https://www.first.org/tlp/"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "Security update for openssl",
        "title": "Title of the patch"
      },
      {
        "category": "description",
        "text": "This update for openssl fixes the following issues:\n\n- CVE-2023-0464: Fixed excessive Resource Usage Verifying X.509 Policy Constraints (bsc#1209624).\n",
        "title": "Description of the patch"
      },
      {
        "category": "details",
        "text": "SUSE-2023-1738,SUSE-SLE-SERVER-12-SP2-BCL-2023-1738",
        "title": "Patchnames"
      },
      {
        "category": "legal_disclaimer",
        "text": "CSAF 2.0 data is provided by SUSE under the Creative Commons License 4.0 with Attribution (CC-BY-4.0).",
        "title": "Terms of use"
      }
    ],
    "publisher": {
      "category": "vendor",
      "contact_details": "https://www.suse.com/support/security/contact/",
      "name": "SUSE Product Security Team",
      "namespace": "https://www.suse.com/"
    },
    "references": [
      {
        "category": "external",
        "summary": "SUSE ratings",
        "url": "https://www.suse.com/support/security/rating/"
      },
      {
        "category": "self",
        "summary": "URL of this CSAF notice",
        "url": "https://ftp.suse.com/pub/projects/security/csaf/suse-su-2023_1738-1.json"
      },
      {
        "category": "self",
        "summary": "URL for SUSE-SU-2023:1738-1",
        "url": "https://www.suse.com/support/update/announcement/2023/suse-su-20231738-1/"
      },
      {
        "category": "self",
        "summary": "E-Mail link for SUSE-SU-2023:1738-1",
        "url": "https://lists.suse.com/pipermail/sle-updates/2023-April/028601.html"
      },
      {
        "category": "self",
        "summary": "SUSE Bug 1209624",
        "url": "https://bugzilla.suse.com/1209624"
      },
      {
        "category": "self",
        "summary": "SUSE CVE CVE-2023-0464 page",
        "url": "https://www.suse.com/security/cve/CVE-2023-0464/"
      }
    ],
    "title": "Security update for openssl",
    "tracking": {
      "current_release_date": "2023-04-03T13:01:39Z",
      "generator": {
        "date": "2023-04-03T13:01:39Z",
        "engine": {
          "name": "cve-database.git:bin/generate-csaf.pl",
          "version": "1"
        }
      },
      "id": "SUSE-SU-2023:1738-1",
      "initial_release_date": "2023-04-03T13:01:39Z",
      "revision_history": [
        {
          "date": "2023-04-03T13:01:39Z",
          "number": "1",
          "summary": "Current version"
        }
      ],
      "status": "final",
      "version": "1"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-devel-1.0.2j-60.89.1.aarch64",
                "product": {
                  "name": "libopenssl-devel-1.0.2j-60.89.1.aarch64",
                  "product_id": "libopenssl-devel-1.0.2j-60.89.1.aarch64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-1.0.2j-60.89.1.aarch64",
                "product": {
                  "name": "libopenssl1_0_0-1.0.2j-60.89.1.aarch64",
                  "product_id": "libopenssl1_0_0-1.0.2j-60.89.1.aarch64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-hmac-1.0.2j-60.89.1.aarch64",
                "product": {
                  "name": "libopenssl1_0_0-hmac-1.0.2j-60.89.1.aarch64",
                  "product_id": "libopenssl1_0_0-hmac-1.0.2j-60.89.1.aarch64"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-1.0.2j-60.89.1.aarch64",
                "product": {
                  "name": "openssl-1.0.2j-60.89.1.aarch64",
                  "product_id": "openssl-1.0.2j-60.89.1.aarch64"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-cavs-1.0.2j-60.89.1.aarch64",
                "product": {
                  "name": "openssl-cavs-1.0.2j-60.89.1.aarch64",
                  "product_id": "openssl-cavs-1.0.2j-60.89.1.aarch64"
                }
              }
            ],
            "category": "architecture",
            "name": "aarch64"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-devel-64bit-1.0.2j-60.89.1.aarch64_ilp32",
                "product": {
                  "name": "libopenssl-devel-64bit-1.0.2j-60.89.1.aarch64_ilp32",
                  "product_id": "libopenssl-devel-64bit-1.0.2j-60.89.1.aarch64_ilp32"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-64bit-1.0.2j-60.89.1.aarch64_ilp32",
                "product": {
                  "name": "libopenssl1_0_0-64bit-1.0.2j-60.89.1.aarch64_ilp32",
                  "product_id": "libopenssl1_0_0-64bit-1.0.2j-60.89.1.aarch64_ilp32"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-hmac-64bit-1.0.2j-60.89.1.aarch64_ilp32",
                "product": {
                  "name": "libopenssl1_0_0-hmac-64bit-1.0.2j-60.89.1.aarch64_ilp32",
                  "product_id": "libopenssl1_0_0-hmac-64bit-1.0.2j-60.89.1.aarch64_ilp32"
                }
              }
            ],
            "category": "architecture",
            "name": "aarch64_ilp32"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-devel-1.0.2j-60.89.1.i586",
                "product": {
                  "name": "libopenssl-devel-1.0.2j-60.89.1.i586",
                  "product_id": "libopenssl-devel-1.0.2j-60.89.1.i586"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-1.0.2j-60.89.1.i586",
                "product": {
                  "name": "libopenssl1_0_0-1.0.2j-60.89.1.i586",
                  "product_id": "libopenssl1_0_0-1.0.2j-60.89.1.i586"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-hmac-1.0.2j-60.89.1.i586",
                "product": {
                  "name": "libopenssl1_0_0-hmac-1.0.2j-60.89.1.i586",
                  "product_id": "libopenssl1_0_0-hmac-1.0.2j-60.89.1.i586"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-1.0.2j-60.89.1.i586",
                "product": {
                  "name": "openssl-1.0.2j-60.89.1.i586",
                  "product_id": "openssl-1.0.2j-60.89.1.i586"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-cavs-1.0.2j-60.89.1.i586",
                "product": {
                  "name": "openssl-cavs-1.0.2j-60.89.1.i586",
                  "product_id": "openssl-cavs-1.0.2j-60.89.1.i586"
                }
              }
            ],
            "category": "architecture",
            "name": "i586"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "openssl-doc-1.0.2j-60.89.1.noarch",
                "product": {
                  "name": "openssl-doc-1.0.2j-60.89.1.noarch",
                  "product_id": "openssl-doc-1.0.2j-60.89.1.noarch"
                }
              }
            ],
            "category": "architecture",
            "name": "noarch"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-devel-1.0.2j-60.89.1.ppc64le",
                "product": {
                  "name": "libopenssl-devel-1.0.2j-60.89.1.ppc64le",
                  "product_id": "libopenssl-devel-1.0.2j-60.89.1.ppc64le"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-1.0.2j-60.89.1.ppc64le",
                "product": {
                  "name": "libopenssl1_0_0-1.0.2j-60.89.1.ppc64le",
                  "product_id": "libopenssl1_0_0-1.0.2j-60.89.1.ppc64le"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-hmac-1.0.2j-60.89.1.ppc64le",
                "product": {
                  "name": "libopenssl1_0_0-hmac-1.0.2j-60.89.1.ppc64le",
                  "product_id": "libopenssl1_0_0-hmac-1.0.2j-60.89.1.ppc64le"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-1.0.2j-60.89.1.ppc64le",
                "product": {
                  "name": "openssl-1.0.2j-60.89.1.ppc64le",
                  "product_id": "openssl-1.0.2j-60.89.1.ppc64le"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-cavs-1.0.2j-60.89.1.ppc64le",
                "product": {
                  "name": "openssl-cavs-1.0.2j-60.89.1.ppc64le",
                  "product_id": "openssl-cavs-1.0.2j-60.89.1.ppc64le"
                }
              }
            ],
            "category": "architecture",
            "name": "ppc64le"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-devel-1.0.2j-60.89.1.s390",
                "product": {
                  "name": "libopenssl-devel-1.0.2j-60.89.1.s390",
                  "product_id": "libopenssl-devel-1.0.2j-60.89.1.s390"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-1.0.2j-60.89.1.s390",
                "product": {
                  "name": "libopenssl1_0_0-1.0.2j-60.89.1.s390",
                  "product_id": "libopenssl1_0_0-1.0.2j-60.89.1.s390"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-hmac-1.0.2j-60.89.1.s390",
                "product": {
                  "name": "libopenssl1_0_0-hmac-1.0.2j-60.89.1.s390",
                  "product_id": "libopenssl1_0_0-hmac-1.0.2j-60.89.1.s390"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-1.0.2j-60.89.1.s390",
                "product": {
                  "name": "openssl-1.0.2j-60.89.1.s390",
                  "product_id": "openssl-1.0.2j-60.89.1.s390"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-cavs-1.0.2j-60.89.1.s390",
                "product": {
                  "name": "openssl-cavs-1.0.2j-60.89.1.s390",
                  "product_id": "openssl-cavs-1.0.2j-60.89.1.s390"
                }
              }
            ],
            "category": "architecture",
            "name": "s390"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-devel-1.0.2j-60.89.1.s390x",
                "product": {
                  "name": "libopenssl-devel-1.0.2j-60.89.1.s390x",
                  "product_id": "libopenssl-devel-1.0.2j-60.89.1.s390x"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl-devel-32bit-1.0.2j-60.89.1.s390x",
                "product": {
                  "name": "libopenssl-devel-32bit-1.0.2j-60.89.1.s390x",
                  "product_id": "libopenssl-devel-32bit-1.0.2j-60.89.1.s390x"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-1.0.2j-60.89.1.s390x",
                "product": {
                  "name": "libopenssl1_0_0-1.0.2j-60.89.1.s390x",
                  "product_id": "libopenssl1_0_0-1.0.2j-60.89.1.s390x"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-32bit-1.0.2j-60.89.1.s390x",
                "product": {
                  "name": "libopenssl1_0_0-32bit-1.0.2j-60.89.1.s390x",
                  "product_id": "libopenssl1_0_0-32bit-1.0.2j-60.89.1.s390x"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-hmac-1.0.2j-60.89.1.s390x",
                "product": {
                  "name": "libopenssl1_0_0-hmac-1.0.2j-60.89.1.s390x",
                  "product_id": "libopenssl1_0_0-hmac-1.0.2j-60.89.1.s390x"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-hmac-32bit-1.0.2j-60.89.1.s390x",
                "product": {
                  "name": "libopenssl1_0_0-hmac-32bit-1.0.2j-60.89.1.s390x",
                  "product_id": "libopenssl1_0_0-hmac-32bit-1.0.2j-60.89.1.s390x"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-1.0.2j-60.89.1.s390x",
                "product": {
                  "name": "openssl-1.0.2j-60.89.1.s390x",
                  "product_id": "openssl-1.0.2j-60.89.1.s390x"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-cavs-1.0.2j-60.89.1.s390x",
                "product": {
                  "name": "openssl-cavs-1.0.2j-60.89.1.s390x",
                  "product_id": "openssl-cavs-1.0.2j-60.89.1.s390x"
                }
              }
            ],
            "category": "architecture",
            "name": "s390x"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-devel-1.0.2j-60.89.1.x86_64",
                "product": {
                  "name": "libopenssl-devel-1.0.2j-60.89.1.x86_64",
                  "product_id": "libopenssl-devel-1.0.2j-60.89.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl-devel-32bit-1.0.2j-60.89.1.x86_64",
                "product": {
                  "name": "libopenssl-devel-32bit-1.0.2j-60.89.1.x86_64",
                  "product_id": "libopenssl-devel-32bit-1.0.2j-60.89.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-1.0.2j-60.89.1.x86_64",
                "product": {
                  "name": "libopenssl1_0_0-1.0.2j-60.89.1.x86_64",
                  "product_id": "libopenssl1_0_0-1.0.2j-60.89.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-32bit-1.0.2j-60.89.1.x86_64",
                "product": {
                  "name": "libopenssl1_0_0-32bit-1.0.2j-60.89.1.x86_64",
                  "product_id": "libopenssl1_0_0-32bit-1.0.2j-60.89.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-hmac-1.0.2j-60.89.1.x86_64",
                "product": {
                  "name": "libopenssl1_0_0-hmac-1.0.2j-60.89.1.x86_64",
                  "product_id": "libopenssl1_0_0-hmac-1.0.2j-60.89.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-hmac-32bit-1.0.2j-60.89.1.x86_64",
                "product": {
                  "name": "libopenssl1_0_0-hmac-32bit-1.0.2j-60.89.1.x86_64",
                  "product_id": "libopenssl1_0_0-hmac-32bit-1.0.2j-60.89.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-1.0.2j-60.89.1.x86_64",
                "product": {
                  "name": "openssl-1.0.2j-60.89.1.x86_64",
                  "product_id": "openssl-1.0.2j-60.89.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-cavs-1.0.2j-60.89.1.x86_64",
                "product": {
                  "name": "openssl-cavs-1.0.2j-60.89.1.x86_64",
                  "product_id": "openssl-cavs-1.0.2j-60.89.1.x86_64"
                }
              }
            ],
            "category": "architecture",
            "name": "x86_64"
          },
          {
            "branches": [
              {
                "category": "product_name",
                "name": "SUSE Linux Enterprise Server 12 SP2-BCL",
                "product": {
                  "name": "SUSE Linux Enterprise Server 12 SP2-BCL",
                  "product_id": "SUSE Linux Enterprise Server 12 SP2-BCL",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:sles-bcl:12:sp2"
                  }
                }
              }
            ],
            "category": "product_family",
            "name": "SUSE Linux Enterprise"
          }
        ],
        "category": "vendor",
        "name": "SUSE"
      }
    ],
    "relationships": [
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-devel-1.0.2j-60.89.1.x86_64 as component of SUSE Linux Enterprise Server 12 SP2-BCL",
          "product_id": "SUSE Linux Enterprise Server 12 SP2-BCL:libopenssl-devel-1.0.2j-60.89.1.x86_64"
        },
        "product_reference": "libopenssl-devel-1.0.2j-60.89.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP2-BCL"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2j-60.89.1.x86_64 as component of SUSE Linux Enterprise Server 12 SP2-BCL",
          "product_id": "SUSE Linux Enterprise Server 12 SP2-BCL:libopenssl1_0_0-1.0.2j-60.89.1.x86_64"
        },
        "product_reference": "libopenssl1_0_0-1.0.2j-60.89.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP2-BCL"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-32bit-1.0.2j-60.89.1.x86_64 as component of SUSE Linux Enterprise Server 12 SP2-BCL",
          "product_id": "SUSE Linux Enterprise Server 12 SP2-BCL:libopenssl1_0_0-32bit-1.0.2j-60.89.1.x86_64"
        },
        "product_reference": "libopenssl1_0_0-32bit-1.0.2j-60.89.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP2-BCL"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-hmac-1.0.2j-60.89.1.x86_64 as component of SUSE Linux Enterprise Server 12 SP2-BCL",
          "product_id": "SUSE Linux Enterprise Server 12 SP2-BCL:libopenssl1_0_0-hmac-1.0.2j-60.89.1.x86_64"
        },
        "product_reference": "libopenssl1_0_0-hmac-1.0.2j-60.89.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP2-BCL"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-hmac-32bit-1.0.2j-60.89.1.x86_64 as component of SUSE Linux Enterprise Server 12 SP2-BCL",
          "product_id": "SUSE Linux Enterprise Server 12 SP2-BCL:libopenssl1_0_0-hmac-32bit-1.0.2j-60.89.1.x86_64"
        },
        "product_reference": "libopenssl1_0_0-hmac-32bit-1.0.2j-60.89.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP2-BCL"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1.0.2j-60.89.1.x86_64 as component of SUSE Linux Enterprise Server 12 SP2-BCL",
          "product_id": "SUSE Linux Enterprise Server 12 SP2-BCL:openssl-1.0.2j-60.89.1.x86_64"
        },
        "product_reference": "openssl-1.0.2j-60.89.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP2-BCL"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-doc-1.0.2j-60.89.1.noarch as component of SUSE Linux Enterprise Server 12 SP2-BCL",
          "product_id": "SUSE Linux Enterprise Server 12 SP2-BCL:openssl-doc-1.0.2j-60.89.1.noarch"
        },
        "product_reference": "openssl-doc-1.0.2j-60.89.1.noarch",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP2-BCL"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2023-0464",
      "ids": [
        {
          "system_name": "SUSE CVE Page",
          "text": "https://www.suse.com/security/cve/CVE-2023-0464"
        }
      ],
      "notes": [
        {
          "category": "general",
          "text": "A security vulnerability has been identified in all supported versions\n\nof OpenSSL related to the verification of X.509 certificate chains\nthat include policy constraints.  Attackers may be able to exploit this\nvulnerability by creating a malicious certificate chain that triggers\nexponential use of computational resources, leading to a denial-of-service\n(DoS) attack on affected systems.\n\nPolicy processing is disabled by default but can be enabled by passing\nthe `-policy\u0027 argument to the command line utilities or by calling the\n`X509_VERIFY_PARAM_set1_policies()\u0027 function.",
          "title": "CVE description"
        }
      ],
      "product_status": {
        "recommended": [
          "SUSE Linux Enterprise Server 12 SP2-BCL:libopenssl-devel-1.0.2j-60.89.1.x86_64",
          "SUSE Linux Enterprise Server 12 SP2-BCL:libopenssl1_0_0-1.0.2j-60.89.1.x86_64",
          "SUSE Linux Enterprise Server 12 SP2-BCL:libopenssl1_0_0-32bit-1.0.2j-60.89.1.x86_64",
          "SUSE Linux Enterprise Server 12 SP2-BCL:libopenssl1_0_0-hmac-1.0.2j-60.89.1.x86_64",
          "SUSE Linux Enterprise Server 12 SP2-BCL:libopenssl1_0_0-hmac-32bit-1.0.2j-60.89.1.x86_64",
          "SUSE Linux Enterprise Server 12 SP2-BCL:openssl-1.0.2j-60.89.1.x86_64",
          "SUSE Linux Enterprise Server 12 SP2-BCL:openssl-doc-1.0.2j-60.89.1.noarch"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "CVE-2023-0464",
          "url": "https://www.suse.com/security/cve/CVE-2023-0464"
        },
        {
          "category": "external",
          "summary": "SUSE Bug 1209624 for CVE-2023-0464",
          "url": "https://bugzilla.suse.com/1209624"
        },
        {
          "category": "external",
          "summary": "SUSE Bug 1225628 for CVE-2023-0464",
          "url": "https://bugzilla.suse.com/1225628"
        }
      ],
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or \"zypper patch\".\n",
          "product_ids": [
            "SUSE Linux Enterprise Server 12 SP2-BCL:libopenssl-devel-1.0.2j-60.89.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP2-BCL:libopenssl1_0_0-1.0.2j-60.89.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP2-BCL:libopenssl1_0_0-32bit-1.0.2j-60.89.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP2-BCL:libopenssl1_0_0-hmac-1.0.2j-60.89.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP2-BCL:libopenssl1_0_0-hmac-32bit-1.0.2j-60.89.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP2-BCL:openssl-1.0.2j-60.89.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP2-BCL:openssl-doc-1.0.2j-60.89.1.noarch"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "SUSE Linux Enterprise Server 12 SP2-BCL:libopenssl-devel-1.0.2j-60.89.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP2-BCL:libopenssl1_0_0-1.0.2j-60.89.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP2-BCL:libopenssl1_0_0-32bit-1.0.2j-60.89.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP2-BCL:libopenssl1_0_0-hmac-1.0.2j-60.89.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP2-BCL:libopenssl1_0_0-hmac-32bit-1.0.2j-60.89.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP2-BCL:openssl-1.0.2j-60.89.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP2-BCL:openssl-doc-1.0.2j-60.89.1.noarch"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "date": "2023-04-03T13:01:39Z",
          "details": "moderate"
        }
      ],
      "title": "CVE-2023-0464"
    }
  ]
}

{
  "document": {
    "aggregate_severity": {
      "namespace": "https://www.suse.com/support/security/rating/",
      "text": "moderate"
    },
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Copyright 2024 SUSE LLC. All rights reserved.",
      "tlp": {
        "label": "WHITE",
        "url": "https://www.first.org/tlp/"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "Security update for openssl",
        "title": "Title of the patch"
      },
      {
        "category": "description",
        "text": "This update for openssl fixes the following issues:\n\n- CVE-2023-0464: Fixed excessive Resource Usage Verifying X.509 Policy Constraints (bsc#1209624).\n",
        "title": "Description of the patch"
      },
      {
        "category": "details",
        "text": "SUSE-2023-1764,SUSE-SLE-SERVER-11-SP4-LTSS-EXTREME-CORE-2023-1764",
        "title": "Patchnames"
      },
      {
        "category": "legal_disclaimer",
        "text": "CSAF 2.0 data is provided by SUSE under the Creative Commons License 4.0 with Attribution (CC-BY-4.0).",
        "title": "Terms of use"
      }
    ],
    "publisher": {
      "category": "vendor",
      "contact_details": "https://www.suse.com/support/security/contact/",
      "name": "SUSE Product Security Team",
      "namespace": "https://www.suse.com/"
    },
    "references": [
      {
        "category": "external",
        "summary": "SUSE ratings",
        "url": "https://www.suse.com/support/security/rating/"
      },
      {
        "category": "self",
        "summary": "URL of this CSAF notice",
        "url": "https://ftp.suse.com/pub/projects/security/csaf/suse-su-2023_1764-1.json"
      },
      {
        "category": "self",
        "summary": "URL for SUSE-SU-2023:1764-1",
        "url": "https://www.suse.com/support/update/announcement/2023/suse-su-20231764-1/"
      },
      {
        "category": "self",
        "summary": "E-Mail link for SUSE-SU-2023:1764-1",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2023-April/014362.html"
      },
      {
        "category": "self",
        "summary": "SUSE Bug 1209624",
        "url": "https://bugzilla.suse.com/1209624"
      },
      {
        "category": "self",
        "summary": "SUSE CVE CVE-2023-0464 page",
        "url": "https://www.suse.com/security/cve/CVE-2023-0464/"
      }
    ],
    "title": "Security update for openssl",
    "tracking": {
      "current_release_date": "2023-04-04T13:00:59Z",
      "generator": {
        "date": "2023-04-04T13:00:59Z",
        "engine": {
          "name": "cve-database.git:bin/generate-csaf.pl",
          "version": "1"
        }
      },
      "id": "SUSE-SU-2023:1764-1",
      "initial_release_date": "2023-04-04T13:00:59Z",
      "revision_history": [
        {
          "date": "2023-04-04T13:00:59Z",
          "number": "1",
          "summary": "Current version"
        }
      ],
      "status": "final",
      "version": "1"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-devel-0.9.8j-0.106.63.1.i586",
                "product": {
                  "name": "libopenssl-devel-0.9.8j-0.106.63.1.i586",
                  "product_id": "libopenssl-devel-0.9.8j-0.106.63.1.i586"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl0_9_8-0.9.8j-0.106.63.1.i586",
                "product": {
                  "name": "libopenssl0_9_8-0.9.8j-0.106.63.1.i586",
                  "product_id": "libopenssl0_9_8-0.9.8j-0.106.63.1.i586"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl0_9_8-hmac-0.9.8j-0.106.63.1.i586",
                "product": {
                  "name": "libopenssl0_9_8-hmac-0.9.8j-0.106.63.1.i586",
                  "product_id": "libopenssl0_9_8-hmac-0.9.8j-0.106.63.1.i586"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-0.9.8j-0.106.63.1.i586",
                "product": {
                  "name": "openssl-0.9.8j-0.106.63.1.i586",
                  "product_id": "openssl-0.9.8j-0.106.63.1.i586"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-doc-0.9.8j-0.106.63.1.i586",
                "product": {
                  "name": "openssl-doc-0.9.8j-0.106.63.1.i586",
                  "product_id": "openssl-doc-0.9.8j-0.106.63.1.i586"
                }
              }
            ],
            "category": "architecture",
            "name": "i586"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-devel-0.9.8j-0.106.63.1.ia64",
                "product": {
                  "name": "libopenssl-devel-0.9.8j-0.106.63.1.ia64",
                  "product_id": "libopenssl-devel-0.9.8j-0.106.63.1.ia64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl0_9_8-0.9.8j-0.106.63.1.ia64",
                "product": {
                  "name": "libopenssl0_9_8-0.9.8j-0.106.63.1.ia64",
                  "product_id": "libopenssl0_9_8-0.9.8j-0.106.63.1.ia64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl0_9_8-hmac-0.9.8j-0.106.63.1.ia64",
                "product": {
                  "name": "libopenssl0_9_8-hmac-0.9.8j-0.106.63.1.ia64",
                  "product_id": "libopenssl0_9_8-hmac-0.9.8j-0.106.63.1.ia64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl0_9_8-hmac-x86-0.9.8j-0.106.63.1.ia64",
                "product": {
                  "name": "libopenssl0_9_8-hmac-x86-0.9.8j-0.106.63.1.ia64",
                  "product_id": "libopenssl0_9_8-hmac-x86-0.9.8j-0.106.63.1.ia64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl0_9_8-x86-0.9.8j-0.106.63.1.ia64",
                "product": {
                  "name": "libopenssl0_9_8-x86-0.9.8j-0.106.63.1.ia64",
                  "product_id": "libopenssl0_9_8-x86-0.9.8j-0.106.63.1.ia64"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-0.9.8j-0.106.63.1.ia64",
                "product": {
                  "name": "openssl-0.9.8j-0.106.63.1.ia64",
                  "product_id": "openssl-0.9.8j-0.106.63.1.ia64"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-doc-0.9.8j-0.106.63.1.ia64",
                "product": {
                  "name": "openssl-doc-0.9.8j-0.106.63.1.ia64",
                  "product_id": "openssl-doc-0.9.8j-0.106.63.1.ia64"
                }
              }
            ],
            "category": "architecture",
            "name": "ia64"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-devel-0.9.8j-0.106.63.1.ppc",
                "product": {
                  "name": "libopenssl-devel-0.9.8j-0.106.63.1.ppc",
                  "product_id": "libopenssl-devel-0.9.8j-0.106.63.1.ppc"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl-devel-64bit-0.9.8j-0.106.63.1.ppc",
                "product": {
                  "name": "libopenssl-devel-64bit-0.9.8j-0.106.63.1.ppc",
                  "product_id": "libopenssl-devel-64bit-0.9.8j-0.106.63.1.ppc"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl0_9_8-0.9.8j-0.106.63.1.ppc",
                "product": {
                  "name": "libopenssl0_9_8-0.9.8j-0.106.63.1.ppc",
                  "product_id": "libopenssl0_9_8-0.9.8j-0.106.63.1.ppc"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl0_9_8-64bit-0.9.8j-0.106.63.1.ppc",
                "product": {
                  "name": "libopenssl0_9_8-64bit-0.9.8j-0.106.63.1.ppc",
                  "product_id": "libopenssl0_9_8-64bit-0.9.8j-0.106.63.1.ppc"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl0_9_8-hmac-0.9.8j-0.106.63.1.ppc",
                "product": {
                  "name": "libopenssl0_9_8-hmac-0.9.8j-0.106.63.1.ppc",
                  "product_id": "libopenssl0_9_8-hmac-0.9.8j-0.106.63.1.ppc"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl0_9_8-hmac-64bit-0.9.8j-0.106.63.1.ppc",
                "product": {
                  "name": "libopenssl0_9_8-hmac-64bit-0.9.8j-0.106.63.1.ppc",
                  "product_id": "libopenssl0_9_8-hmac-64bit-0.9.8j-0.106.63.1.ppc"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-0.9.8j-0.106.63.1.ppc",
                "product": {
                  "name": "openssl-0.9.8j-0.106.63.1.ppc",
                  "product_id": "openssl-0.9.8j-0.106.63.1.ppc"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-doc-0.9.8j-0.106.63.1.ppc",
                "product": {
                  "name": "openssl-doc-0.9.8j-0.106.63.1.ppc",
                  "product_id": "openssl-doc-0.9.8j-0.106.63.1.ppc"
                }
              }
            ],
            "category": "architecture",
            "name": "ppc"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-devel-0.9.8j-0.106.63.1.ppc64",
                "product": {
                  "name": "libopenssl-devel-0.9.8j-0.106.63.1.ppc64",
                  "product_id": "libopenssl-devel-0.9.8j-0.106.63.1.ppc64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl-devel-32bit-0.9.8j-0.106.63.1.ppc64",
                "product": {
                  "name": "libopenssl-devel-32bit-0.9.8j-0.106.63.1.ppc64",
                  "product_id": "libopenssl-devel-32bit-0.9.8j-0.106.63.1.ppc64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl0_9_8-0.9.8j-0.106.63.1.ppc64",
                "product": {
                  "name": "libopenssl0_9_8-0.9.8j-0.106.63.1.ppc64",
                  "product_id": "libopenssl0_9_8-0.9.8j-0.106.63.1.ppc64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl0_9_8-32bit-0.9.8j-0.106.63.1.ppc64",
                "product": {
                  "name": "libopenssl0_9_8-32bit-0.9.8j-0.106.63.1.ppc64",
                  "product_id": "libopenssl0_9_8-32bit-0.9.8j-0.106.63.1.ppc64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl0_9_8-hmac-0.9.8j-0.106.63.1.ppc64",
                "product": {
                  "name": "libopenssl0_9_8-hmac-0.9.8j-0.106.63.1.ppc64",
                  "product_id": "libopenssl0_9_8-hmac-0.9.8j-0.106.63.1.ppc64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl0_9_8-hmac-32bit-0.9.8j-0.106.63.1.ppc64",
                "product": {
                  "name": "libopenssl0_9_8-hmac-32bit-0.9.8j-0.106.63.1.ppc64",
                  "product_id": "libopenssl0_9_8-hmac-32bit-0.9.8j-0.106.63.1.ppc64"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-0.9.8j-0.106.63.1.ppc64",
                "product": {
                  "name": "openssl-0.9.8j-0.106.63.1.ppc64",
                  "product_id": "openssl-0.9.8j-0.106.63.1.ppc64"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-doc-0.9.8j-0.106.63.1.ppc64",
                "product": {
                  "name": "openssl-doc-0.9.8j-0.106.63.1.ppc64",
                  "product_id": "openssl-doc-0.9.8j-0.106.63.1.ppc64"
                }
              }
            ],
            "category": "architecture",
            "name": "ppc64"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-devel-0.9.8j-0.106.63.1.s390",
                "product": {
                  "name": "libopenssl-devel-0.9.8j-0.106.63.1.s390",
                  "product_id": "libopenssl-devel-0.9.8j-0.106.63.1.s390"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl0_9_8-0.9.8j-0.106.63.1.s390",
                "product": {
                  "name": "libopenssl0_9_8-0.9.8j-0.106.63.1.s390",
                  "product_id": "libopenssl0_9_8-0.9.8j-0.106.63.1.s390"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl0_9_8-hmac-0.9.8j-0.106.63.1.s390",
                "product": {
                  "name": "libopenssl0_9_8-hmac-0.9.8j-0.106.63.1.s390",
                  "product_id": "libopenssl0_9_8-hmac-0.9.8j-0.106.63.1.s390"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-0.9.8j-0.106.63.1.s390",
                "product": {
                  "name": "openssl-0.9.8j-0.106.63.1.s390",
                  "product_id": "openssl-0.9.8j-0.106.63.1.s390"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-doc-0.9.8j-0.106.63.1.s390",
                "product": {
                  "name": "openssl-doc-0.9.8j-0.106.63.1.s390",
                  "product_id": "openssl-doc-0.9.8j-0.106.63.1.s390"
                }
              }
            ],
            "category": "architecture",
            "name": "s390"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-devel-0.9.8j-0.106.63.1.s390x",
                "product": {
                  "name": "libopenssl-devel-0.9.8j-0.106.63.1.s390x",
                  "product_id": "libopenssl-devel-0.9.8j-0.106.63.1.s390x"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl-devel-32bit-0.9.8j-0.106.63.1.s390x",
                "product": {
                  "name": "libopenssl-devel-32bit-0.9.8j-0.106.63.1.s390x",
                  "product_id": "libopenssl-devel-32bit-0.9.8j-0.106.63.1.s390x"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl0_9_8-0.9.8j-0.106.63.1.s390x",
                "product": {
                  "name": "libopenssl0_9_8-0.9.8j-0.106.63.1.s390x",
                  "product_id": "libopenssl0_9_8-0.9.8j-0.106.63.1.s390x"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl0_9_8-32bit-0.9.8j-0.106.63.1.s390x",
                "product": {
                  "name": "libopenssl0_9_8-32bit-0.9.8j-0.106.63.1.s390x",
                  "product_id": "libopenssl0_9_8-32bit-0.9.8j-0.106.63.1.s390x"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl0_9_8-hmac-0.9.8j-0.106.63.1.s390x",
                "product": {
                  "name": "libopenssl0_9_8-hmac-0.9.8j-0.106.63.1.s390x",
                  "product_id": "libopenssl0_9_8-hmac-0.9.8j-0.106.63.1.s390x"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl0_9_8-hmac-32bit-0.9.8j-0.106.63.1.s390x",
                "product": {
                  "name": "libopenssl0_9_8-hmac-32bit-0.9.8j-0.106.63.1.s390x",
                  "product_id": "libopenssl0_9_8-hmac-32bit-0.9.8j-0.106.63.1.s390x"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-0.9.8j-0.106.63.1.s390x",
                "product": {
                  "name": "openssl-0.9.8j-0.106.63.1.s390x",
                  "product_id": "openssl-0.9.8j-0.106.63.1.s390x"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-doc-0.9.8j-0.106.63.1.s390x",
                "product": {
                  "name": "openssl-doc-0.9.8j-0.106.63.1.s390x",
                  "product_id": "openssl-doc-0.9.8j-0.106.63.1.s390x"
                }
              }
            ],
            "category": "architecture",
            "name": "s390x"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-devel-0.9.8j-0.106.63.1.x86_64",
                "product": {
                  "name": "libopenssl-devel-0.9.8j-0.106.63.1.x86_64",
                  "product_id": "libopenssl-devel-0.9.8j-0.106.63.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl-devel-32bit-0.9.8j-0.106.63.1.x86_64",
                "product": {
                  "name": "libopenssl-devel-32bit-0.9.8j-0.106.63.1.x86_64",
                  "product_id": "libopenssl-devel-32bit-0.9.8j-0.106.63.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl0_9_8-0.9.8j-0.106.63.1.x86_64",
                "product": {
                  "name": "libopenssl0_9_8-0.9.8j-0.106.63.1.x86_64",
                  "product_id": "libopenssl0_9_8-0.9.8j-0.106.63.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl0_9_8-32bit-0.9.8j-0.106.63.1.x86_64",
                "product": {
                  "name": "libopenssl0_9_8-32bit-0.9.8j-0.106.63.1.x86_64",
                  "product_id": "libopenssl0_9_8-32bit-0.9.8j-0.106.63.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl0_9_8-hmac-0.9.8j-0.106.63.1.x86_64",
                "product": {
                  "name": "libopenssl0_9_8-hmac-0.9.8j-0.106.63.1.x86_64",
                  "product_id": "libopenssl0_9_8-hmac-0.9.8j-0.106.63.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl0_9_8-hmac-32bit-0.9.8j-0.106.63.1.x86_64",
                "product": {
                  "name": "libopenssl0_9_8-hmac-32bit-0.9.8j-0.106.63.1.x86_64",
                  "product_id": "libopenssl0_9_8-hmac-32bit-0.9.8j-0.106.63.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-0.9.8j-0.106.63.1.x86_64",
                "product": {
                  "name": "openssl-0.9.8j-0.106.63.1.x86_64",
                  "product_id": "openssl-0.9.8j-0.106.63.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-doc-0.9.8j-0.106.63.1.x86_64",
                "product": {
                  "name": "openssl-doc-0.9.8j-0.106.63.1.x86_64",
                  "product_id": "openssl-doc-0.9.8j-0.106.63.1.x86_64"
                }
              }
            ],
            "category": "architecture",
            "name": "x86_64"
          },
          {
            "branches": [
              {
                "category": "product_name",
                "name": "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE",
                "product": {
                  "name": "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE",
                  "product_id": "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:suse_sles_ltss-extreme-core:11:sp4"
                  }
                }
              }
            ],
            "category": "product_family",
            "name": "SUSE Linux Enterprise"
          }
        ],
        "category": "vendor",
        "name": "SUSE"
      }
    ],
    "relationships": [
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl0_9_8-0.9.8j-0.106.63.1.x86_64 as component of SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE",
          "product_id": "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE:libopenssl0_9_8-0.9.8j-0.106.63.1.x86_64"
        },
        "product_reference": "libopenssl0_9_8-0.9.8j-0.106.63.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl0_9_8-32bit-0.9.8j-0.106.63.1.x86_64 as component of SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE",
          "product_id": "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE:libopenssl0_9_8-32bit-0.9.8j-0.106.63.1.x86_64"
        },
        "product_reference": "libopenssl0_9_8-32bit-0.9.8j-0.106.63.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl0_9_8-hmac-0.9.8j-0.106.63.1.x86_64 as component of SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE",
          "product_id": "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE:libopenssl0_9_8-hmac-0.9.8j-0.106.63.1.x86_64"
        },
        "product_reference": "libopenssl0_9_8-hmac-0.9.8j-0.106.63.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl0_9_8-hmac-32bit-0.9.8j-0.106.63.1.x86_64 as component of SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE",
          "product_id": "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE:libopenssl0_9_8-hmac-32bit-0.9.8j-0.106.63.1.x86_64"
        },
        "product_reference": "libopenssl0_9_8-hmac-32bit-0.9.8j-0.106.63.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-0.9.8j-0.106.63.1.x86_64 as component of SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE",
          "product_id": "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE:openssl-0.9.8j-0.106.63.1.x86_64"
        },
        "product_reference": "openssl-0.9.8j-0.106.63.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-doc-0.9.8j-0.106.63.1.x86_64 as component of SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE",
          "product_id": "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE:openssl-doc-0.9.8j-0.106.63.1.x86_64"
        },
        "product_reference": "openssl-doc-0.9.8j-0.106.63.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2023-0464",
      "ids": [
        {
          "system_name": "SUSE CVE Page",
          "text": "https://www.suse.com/security/cve/CVE-2023-0464"
        }
      ],
      "notes": [
        {
          "category": "general",
          "text": "A security vulnerability has been identified in all supported versions\n\nof OpenSSL related to the verification of X.509 certificate chains\nthat include policy constraints.  Attackers may be able to exploit this\nvulnerability by creating a malicious certificate chain that triggers\nexponential use of computational resources, leading to a denial-of-service\n(DoS) attack on affected systems.\n\nPolicy processing is disabled by default but can be enabled by passing\nthe `-policy\u0027 argument to the command line utilities or by calling the\n`X509_VERIFY_PARAM_set1_policies()\u0027 function.",
          "title": "CVE description"
        }
      ],
      "product_status": {
        "recommended": [
          "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE:libopenssl0_9_8-0.9.8j-0.106.63.1.x86_64",
          "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE:libopenssl0_9_8-32bit-0.9.8j-0.106.63.1.x86_64",
          "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE:libopenssl0_9_8-hmac-0.9.8j-0.106.63.1.x86_64",
          "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE:libopenssl0_9_8-hmac-32bit-0.9.8j-0.106.63.1.x86_64",
          "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE:openssl-0.9.8j-0.106.63.1.x86_64",
          "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE:openssl-doc-0.9.8j-0.106.63.1.x86_64"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "CVE-2023-0464",
          "url": "https://www.suse.com/security/cve/CVE-2023-0464"
        },
        {
          "category": "external",
          "summary": "SUSE Bug 1209624 for CVE-2023-0464",
          "url": "https://bugzilla.suse.com/1209624"
        },
        {
          "category": "external",
          "summary": "SUSE Bug 1225628 for CVE-2023-0464",
          "url": "https://bugzilla.suse.com/1225628"
        }
      ],
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or \"zypper patch\".\n",
          "product_ids": [
            "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE:libopenssl0_9_8-0.9.8j-0.106.63.1.x86_64",
            "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE:libopenssl0_9_8-32bit-0.9.8j-0.106.63.1.x86_64",
            "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE:libopenssl0_9_8-hmac-0.9.8j-0.106.63.1.x86_64",
            "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE:libopenssl0_9_8-hmac-32bit-0.9.8j-0.106.63.1.x86_64",
            "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE:openssl-0.9.8j-0.106.63.1.x86_64",
            "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE:openssl-doc-0.9.8j-0.106.63.1.x86_64"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE:libopenssl0_9_8-0.9.8j-0.106.63.1.x86_64",
            "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE:libopenssl0_9_8-32bit-0.9.8j-0.106.63.1.x86_64",
            "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE:libopenssl0_9_8-hmac-0.9.8j-0.106.63.1.x86_64",
            "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE:libopenssl0_9_8-hmac-32bit-0.9.8j-0.106.63.1.x86_64",
            "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE:openssl-0.9.8j-0.106.63.1.x86_64",
            "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE:openssl-doc-0.9.8j-0.106.63.1.x86_64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "date": "2023-04-04T13:00:59Z",
          "details": "moderate"
        }
      ],
      "title": "CVE-2023-0464"
    }
  ]
}

{
  "document": {
    "aggregate_severity": {
      "namespace": "https://www.suse.com/support/security/rating/",
      "text": "moderate"
    },
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Copyright 2024 SUSE LLC. All rights reserved.",
      "tlp": {
        "label": "WHITE",
        "url": "https://www.first.org/tlp/"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "Security update for openssl-1_0_0",
        "title": "Title of the patch"
      },
      {
        "category": "description",
        "text": "This update for openssl-1_0_0 fixes the following issues:\n\nSecurity fixes:\n\n- CVE-2023-0464: Fixed excessive Resource Usage Verifying X.509 Policy Constraints (bsc#1209624).\n\nOther fixes:\n\n- Fix DH key generation in FIPS mode, add support for constant BN for DH parameters (bsc#1202062)\n",
        "title": "Description of the patch"
      },
      {
        "category": "details",
        "text": "SUSE-2023-1703,SUSE-SLE-Module-Legacy-15-SP4-2023-1703,SUSE-SLE-Product-HPC-15-SP3-ESPOS-2023-1703,SUSE-SLE-Product-HPC-15-SP3-LTSS-2023-1703,SUSE-SLE-Product-SLES-15-SP1-LTSS-2023-1703,SUSE-SLE-Product-SLES-15-SP2-LTSS-2023-1703,SUSE-SLE-Product-SLES-15-SP3-LTSS-2023-1703,SUSE-SLE-Product-SLES_SAP-15-SP1-2023-1703,SUSE-SLE-Product-SLES_SAP-15-SP2-2023-1703,SUSE-SLE-Product-SLES_SAP-15-SP3-2023-1703,SUSE-Storage-7-2023-1703,SUSE-Storage-7.1-2023-1703,openSUSE-SLE-15.4-2023-1703",
        "title": "Patchnames"
      },
      {
        "category": "legal_disclaimer",
        "text": "CSAF 2.0 data is provided by SUSE under the Creative Commons License 4.0 with Attribution (CC-BY-4.0).",
        "title": "Terms of use"
      }
    ],
    "publisher": {
      "category": "vendor",
      "contact_details": "https://www.suse.com/support/security/contact/",
      "name": "SUSE Product Security Team",
      "namespace": "https://www.suse.com/"
    },
    "references": [
      {
        "category": "external",
        "summary": "SUSE ratings",
        "url": "https://www.suse.com/support/security/rating/"
      },
      {
        "category": "self",
        "summary": "URL of this CSAF notice",
        "url": "https://ftp.suse.com/pub/projects/security/csaf/suse-su-2023_1703-1.json"
      },
      {
        "category": "self",
        "summary": "URL for SUSE-SU-2023:1703-1",
        "url": "https://www.suse.com/support/update/announcement/2023/suse-su-20231703-1/"
      },
      {
        "category": "self",
        "summary": "E-Mail link for SUSE-SU-2023:1703-1",
        "url": "https://lists.suse.com/pipermail/sle-updates/2023-March/028508.html"
      },
      {
        "category": "self",
        "summary": "SUSE Bug 1202062",
        "url": "https://bugzilla.suse.com/1202062"
      },
      {
        "category": "self",
        "summary": "SUSE Bug 1209624",
        "url": "https://bugzilla.suse.com/1209624"
      },
      {
        "category": "self",
        "summary": "SUSE CVE CVE-2023-0464 page",
        "url": "https://www.suse.com/security/cve/CVE-2023-0464/"
      }
    ],
    "title": "Security update for openssl-1_0_0",
    "tracking": {
      "current_release_date": "2023-03-30T14:15:28Z",
      "generator": {
        "date": "2023-03-30T14:15:28Z",
        "engine": {
          "name": "cve-database.git:bin/generate-csaf.pl",
          "version": "1"
        }
      },
      "id": "SUSE-SU-2023:1703-1",
      "initial_release_date": "2023-03-30T14:15:28Z",
      "revision_history": [
        {
          "date": "2023-03-30T14:15:28Z",
          "number": "1",
          "summary": "Current version"
        }
      ],
      "status": "final",
      "version": "1"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64",
                "product": {
                  "name": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64",
                  "product_id": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl10-1.0.2p-150000.3.70.1.aarch64",
                "product": {
                  "name": "libopenssl10-1.0.2p-150000.3.70.1.aarch64",
                  "product_id": "libopenssl10-1.0.2p-150000.3.70.1.aarch64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64",
                "product": {
                  "name": "libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64",
                  "product_id": "libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.aarch64",
                "product": {
                  "name": "libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.aarch64",
                  "product_id": "libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.aarch64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-steam-1.0.2p-150000.3.70.1.aarch64",
                "product": {
                  "name": "libopenssl1_0_0-steam-1.0.2p-150000.3.70.1.aarch64",
                  "product_id": "libopenssl1_0_0-steam-1.0.2p-150000.3.70.1.aarch64"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64",
                "product": {
                  "name": "openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64",
                  "product_id": "openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-1_0_0-cavs-1.0.2p-150000.3.70.1.aarch64",
                "product": {
                  "name": "openssl-1_0_0-cavs-1.0.2p-150000.3.70.1.aarch64",
                  "product_id": "openssl-1_0_0-cavs-1.0.2p-150000.3.70.1.aarch64"
                }
              }
            ],
            "category": "architecture",
            "name": "aarch64"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-1_0_0-devel-64bit-1.0.2p-150000.3.70.1.aarch64_ilp32",
                "product": {
                  "name": "libopenssl-1_0_0-devel-64bit-1.0.2p-150000.3.70.1.aarch64_ilp32",
                  "product_id": "libopenssl-1_0_0-devel-64bit-1.0.2p-150000.3.70.1.aarch64_ilp32"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-64bit-1.0.2p-150000.3.70.1.aarch64_ilp32",
                "product": {
                  "name": "libopenssl1_0_0-64bit-1.0.2p-150000.3.70.1.aarch64_ilp32",
                  "product_id": "libopenssl1_0_0-64bit-1.0.2p-150000.3.70.1.aarch64_ilp32"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-hmac-64bit-1.0.2p-150000.3.70.1.aarch64_ilp32",
                "product": {
                  "name": "libopenssl1_0_0-hmac-64bit-1.0.2p-150000.3.70.1.aarch64_ilp32",
                  "product_id": "libopenssl1_0_0-hmac-64bit-1.0.2p-150000.3.70.1.aarch64_ilp32"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-steam-64bit-1.0.2p-150000.3.70.1.aarch64_ilp32",
                "product": {
                  "name": "libopenssl1_0_0-steam-64bit-1.0.2p-150000.3.70.1.aarch64_ilp32",
                  "product_id": "libopenssl1_0_0-steam-64bit-1.0.2p-150000.3.70.1.aarch64_ilp32"
                }
              }
            ],
            "category": "architecture",
            "name": "aarch64_ilp32"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.i586",
                "product": {
                  "name": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.i586",
                  "product_id": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.i586"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl10-1.0.2p-150000.3.70.1.i586",
                "product": {
                  "name": "libopenssl10-1.0.2p-150000.3.70.1.i586",
                  "product_id": "libopenssl10-1.0.2p-150000.3.70.1.i586"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-1.0.2p-150000.3.70.1.i586",
                "product": {
                  "name": "libopenssl1_0_0-1.0.2p-150000.3.70.1.i586",
                  "product_id": "libopenssl1_0_0-1.0.2p-150000.3.70.1.i586"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.i586",
                "product": {
                  "name": "libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.i586",
                  "product_id": "libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.i586"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-steam-1.0.2p-150000.3.70.1.i586",
                "product": {
                  "name": "libopenssl1_0_0-steam-1.0.2p-150000.3.70.1.i586",
                  "product_id": "libopenssl1_0_0-steam-1.0.2p-150000.3.70.1.i586"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-1_0_0-1.0.2p-150000.3.70.1.i586",
                "product": {
                  "name": "openssl-1_0_0-1.0.2p-150000.3.70.1.i586",
                  "product_id": "openssl-1_0_0-1.0.2p-150000.3.70.1.i586"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-1_0_0-cavs-1.0.2p-150000.3.70.1.i586",
                "product": {
                  "name": "openssl-1_0_0-cavs-1.0.2p-150000.3.70.1.i586",
                  "product_id": "openssl-1_0_0-cavs-1.0.2p-150000.3.70.1.i586"
                }
              }
            ],
            "category": "architecture",
            "name": "i586"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "openssl-1_0_0-doc-1.0.2p-150000.3.70.1.noarch",
                "product": {
                  "name": "openssl-1_0_0-doc-1.0.2p-150000.3.70.1.noarch",
                  "product_id": "openssl-1_0_0-doc-1.0.2p-150000.3.70.1.noarch"
                }
              }
            ],
            "category": "architecture",
            "name": "noarch"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.ppc64le",
                "product": {
                  "name": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.ppc64le",
                  "product_id": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.ppc64le"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl10-1.0.2p-150000.3.70.1.ppc64le",
                "product": {
                  "name": "libopenssl10-1.0.2p-150000.3.70.1.ppc64le",
                  "product_id": "libopenssl10-1.0.2p-150000.3.70.1.ppc64le"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-1.0.2p-150000.3.70.1.ppc64le",
                "product": {
                  "name": "libopenssl1_0_0-1.0.2p-150000.3.70.1.ppc64le",
                  "product_id": "libopenssl1_0_0-1.0.2p-150000.3.70.1.ppc64le"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.ppc64le",
                "product": {
                  "name": "libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.ppc64le",
                  "product_id": "libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.ppc64le"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-steam-1.0.2p-150000.3.70.1.ppc64le",
                "product": {
                  "name": "libopenssl1_0_0-steam-1.0.2p-150000.3.70.1.ppc64le",
                  "product_id": "libopenssl1_0_0-steam-1.0.2p-150000.3.70.1.ppc64le"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-1_0_0-1.0.2p-150000.3.70.1.ppc64le",
                "product": {
                  "name": "openssl-1_0_0-1.0.2p-150000.3.70.1.ppc64le",
                  "product_id": "openssl-1_0_0-1.0.2p-150000.3.70.1.ppc64le"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-1_0_0-cavs-1.0.2p-150000.3.70.1.ppc64le",
                "product": {
                  "name": "openssl-1_0_0-cavs-1.0.2p-150000.3.70.1.ppc64le",
                  "product_id": "openssl-1_0_0-cavs-1.0.2p-150000.3.70.1.ppc64le"
                }
              }
            ],
            "category": "architecture",
            "name": "ppc64le"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.s390x",
                "product": {
                  "name": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.s390x",
                  "product_id": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.s390x"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl10-1.0.2p-150000.3.70.1.s390x",
                "product": {
                  "name": "libopenssl10-1.0.2p-150000.3.70.1.s390x",
                  "product_id": "libopenssl10-1.0.2p-150000.3.70.1.s390x"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-1.0.2p-150000.3.70.1.s390x",
                "product": {
                  "name": "libopenssl1_0_0-1.0.2p-150000.3.70.1.s390x",
                  "product_id": "libopenssl1_0_0-1.0.2p-150000.3.70.1.s390x"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.s390x",
                "product": {
                  "name": "libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.s390x",
                  "product_id": "libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.s390x"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-steam-1.0.2p-150000.3.70.1.s390x",
                "product": {
                  "name": "libopenssl1_0_0-steam-1.0.2p-150000.3.70.1.s390x",
                  "product_id": "libopenssl1_0_0-steam-1.0.2p-150000.3.70.1.s390x"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-1_0_0-1.0.2p-150000.3.70.1.s390x",
                "product": {
                  "name": "openssl-1_0_0-1.0.2p-150000.3.70.1.s390x",
                  "product_id": "openssl-1_0_0-1.0.2p-150000.3.70.1.s390x"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-1_0_0-cavs-1.0.2p-150000.3.70.1.s390x",
                "product": {
                  "name": "openssl-1_0_0-cavs-1.0.2p-150000.3.70.1.s390x",
                  "product_id": "openssl-1_0_0-cavs-1.0.2p-150000.3.70.1.s390x"
                }
              }
            ],
            "category": "architecture",
            "name": "s390x"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64",
                "product": {
                  "name": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64",
                  "product_id": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl-1_0_0-devel-32bit-1.0.2p-150000.3.70.1.x86_64",
                "product": {
                  "name": "libopenssl-1_0_0-devel-32bit-1.0.2p-150000.3.70.1.x86_64",
                  "product_id": "libopenssl-1_0_0-devel-32bit-1.0.2p-150000.3.70.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl10-1.0.2p-150000.3.70.1.x86_64",
                "product": {
                  "name": "libopenssl10-1.0.2p-150000.3.70.1.x86_64",
                  "product_id": "libopenssl10-1.0.2p-150000.3.70.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64",
                "product": {
                  "name": "libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64",
                  "product_id": "libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-32bit-1.0.2p-150000.3.70.1.x86_64",
                "product": {
                  "name": "libopenssl1_0_0-32bit-1.0.2p-150000.3.70.1.x86_64",
                  "product_id": "libopenssl1_0_0-32bit-1.0.2p-150000.3.70.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.x86_64",
                "product": {
                  "name": "libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.x86_64",
                  "product_id": "libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-hmac-32bit-1.0.2p-150000.3.70.1.x86_64",
                "product": {
                  "name": "libopenssl1_0_0-hmac-32bit-1.0.2p-150000.3.70.1.x86_64",
                  "product_id": "libopenssl1_0_0-hmac-32bit-1.0.2p-150000.3.70.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-steam-1.0.2p-150000.3.70.1.x86_64",
                "product": {
                  "name": "libopenssl1_0_0-steam-1.0.2p-150000.3.70.1.x86_64",
                  "product_id": "libopenssl1_0_0-steam-1.0.2p-150000.3.70.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-steam-32bit-1.0.2p-150000.3.70.1.x86_64",
                "product": {
                  "name": "libopenssl1_0_0-steam-32bit-1.0.2p-150000.3.70.1.x86_64",
                  "product_id": "libopenssl1_0_0-steam-32bit-1.0.2p-150000.3.70.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64",
                "product": {
                  "name": "openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64",
                  "product_id": "openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-1_0_0-cavs-1.0.2p-150000.3.70.1.x86_64",
                "product": {
                  "name": "openssl-1_0_0-cavs-1.0.2p-150000.3.70.1.x86_64",
                  "product_id": "openssl-1_0_0-cavs-1.0.2p-150000.3.70.1.x86_64"
                }
              }
            ],
            "category": "architecture",
            "name": "x86_64"
          },
          {
            "branches": [
              {
                "category": "product_name",
                "name": "SUSE Linux Enterprise Module for Legacy 15 SP4",
                "product": {
                  "name": "SUSE Linux Enterprise Module for Legacy 15 SP4",
                  "product_id": "SUSE Linux Enterprise Module for Legacy 15 SP4",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:sle-module-legacy:15:sp4"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS",
                "product": {
                  "name": "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS",
                  "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:sle_hpc-espos:15:sp3"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS",
                "product": {
                  "name": "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS",
                  "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:sle_hpc-ltss:15:sp3"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "SUSE Linux Enterprise Server 15 SP1-LTSS",
                "product": {
                  "name": "SUSE Linux Enterprise Server 15 SP1-LTSS",
                  "product_id": "SUSE Linux Enterprise Server 15 SP1-LTSS",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:sles-ltss:15:sp1"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "SUSE Linux Enterprise Server 15 SP2-LTSS",
                "product": {
                  "name": "SUSE Linux Enterprise Server 15 SP2-LTSS",
                  "product_id": "SUSE Linux Enterprise Server 15 SP2-LTSS",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:sles-ltss:15:sp2"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "SUSE Linux Enterprise Server 15 SP3-LTSS",
                "product": {
                  "name": "SUSE Linux Enterprise Server 15 SP3-LTSS",
                  "product_id": "SUSE Linux Enterprise Server 15 SP3-LTSS",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:sles-ltss:15:sp3"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "SUSE Linux Enterprise Server for SAP Applications 15 SP1",
                "product": {
                  "name": "SUSE Linux Enterprise Server for SAP Applications 15 SP1",
                  "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP1",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:sles_sap:15:sp1"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "SUSE Linux Enterprise Server for SAP Applications 15 SP2",
                "product": {
                  "name": "SUSE Linux Enterprise Server for SAP Applications 15 SP2",
                  "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP2",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:sles_sap:15:sp2"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "SUSE Linux Enterprise Server for SAP Applications 15 SP3",
                "product": {
                  "name": "SUSE Linux Enterprise Server for SAP Applications 15 SP3",
                  "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP3",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:sles_sap:15:sp3"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "SUSE Enterprise Storage 7",
                "product": {
                  "name": "SUSE Enterprise Storage 7",
                  "product_id": "SUSE Enterprise Storage 7",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:ses:7"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "SUSE Enterprise Storage 7.1",
                "product": {
                  "name": "SUSE Enterprise Storage 7.1",
                  "product_id": "SUSE Enterprise Storage 7.1",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:ses:7.1"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "openSUSE Leap 15.4",
                "product": {
                  "name": "openSUSE Leap 15.4",
                  "product_id": "openSUSE Leap 15.4",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:opensuse:leap:15.4"
                  }
                }
              }
            ],
            "category": "product_family",
            "name": "SUSE Linux Enterprise"
          }
        ],
        "category": "vendor",
        "name": "SUSE"
      }
    ],
    "relationships": [
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64 as component of SUSE Linux Enterprise Module for Legacy 15 SP4",
          "product_id": "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Legacy 15 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.ppc64le as component of SUSE Linux Enterprise Module for Legacy 15 SP4",
          "product_id": "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.ppc64le"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Legacy 15 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.s390x as component of SUSE Linux Enterprise Module for Legacy 15 SP4",
          "product_id": "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.s390x"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Legacy 15 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64 as component of SUSE Linux Enterprise Module for Legacy 15 SP4",
          "product_id": "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Legacy 15 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl10-1.0.2p-150000.3.70.1.aarch64 as component of SUSE Linux Enterprise Module for Legacy 15 SP4",
          "product_id": "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl10-1.0.2p-150000.3.70.1.aarch64"
        },
        "product_reference": "libopenssl10-1.0.2p-150000.3.70.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Legacy 15 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl10-1.0.2p-150000.3.70.1.ppc64le as component of SUSE Linux Enterprise Module for Legacy 15 SP4",
          "product_id": "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl10-1.0.2p-150000.3.70.1.ppc64le"
        },
        "product_reference": "libopenssl10-1.0.2p-150000.3.70.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Legacy 15 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl10-1.0.2p-150000.3.70.1.s390x as component of SUSE Linux Enterprise Module for Legacy 15 SP4",
          "product_id": "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl10-1.0.2p-150000.3.70.1.s390x"
        },
        "product_reference": "libopenssl10-1.0.2p-150000.3.70.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Legacy 15 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl10-1.0.2p-150000.3.70.1.x86_64 as component of SUSE Linux Enterprise Module for Legacy 15 SP4",
          "product_id": "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl10-1.0.2p-150000.3.70.1.x86_64"
        },
        "product_reference": "libopenssl10-1.0.2p-150000.3.70.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Legacy 15 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64 as component of SUSE Linux Enterprise Module for Legacy 15 SP4",
          "product_id": "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64"
        },
        "product_reference": "libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Legacy 15 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2p-150000.3.70.1.ppc64le as component of SUSE Linux Enterprise Module for Legacy 15 SP4",
          "product_id": "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl1_0_0-1.0.2p-150000.3.70.1.ppc64le"
        },
        "product_reference": "libopenssl1_0_0-1.0.2p-150000.3.70.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Legacy 15 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2p-150000.3.70.1.s390x as component of SUSE Linux Enterprise Module for Legacy 15 SP4",
          "product_id": "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl1_0_0-1.0.2p-150000.3.70.1.s390x"
        },
        "product_reference": "libopenssl1_0_0-1.0.2p-150000.3.70.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Legacy 15 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64 as component of SUSE Linux Enterprise Module for Legacy 15 SP4",
          "product_id": "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64"
        },
        "product_reference": "libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Legacy 15 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.aarch64 as component of SUSE Linux Enterprise Module for Legacy 15 SP4",
          "product_id": "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.aarch64"
        },
        "product_reference": "libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Legacy 15 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.ppc64le as component of SUSE Linux Enterprise Module for Legacy 15 SP4",
          "product_id": "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.ppc64le"
        },
        "product_reference": "libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Legacy 15 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.s390x as component of SUSE Linux Enterprise Module for Legacy 15 SP4",
          "product_id": "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.s390x"
        },
        "product_reference": "libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Legacy 15 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.x86_64 as component of SUSE Linux Enterprise Module for Legacy 15 SP4",
          "product_id": "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.x86_64"
        },
        "product_reference": "libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Legacy 15 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64 as component of SUSE Linux Enterprise Module for Legacy 15 SP4",
          "product_id": "SUSE Linux Enterprise Module for Legacy 15 SP4:openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64"
        },
        "product_reference": "openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Legacy 15 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-1.0.2p-150000.3.70.1.ppc64le as component of SUSE Linux Enterprise Module for Legacy 15 SP4",
          "product_id": "SUSE Linux Enterprise Module for Legacy 15 SP4:openssl-1_0_0-1.0.2p-150000.3.70.1.ppc64le"
        },
        "product_reference": "openssl-1_0_0-1.0.2p-150000.3.70.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Legacy 15 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-1.0.2p-150000.3.70.1.s390x as component of SUSE Linux Enterprise Module for Legacy 15 SP4",
          "product_id": "SUSE Linux Enterprise Module for Legacy 15 SP4:openssl-1_0_0-1.0.2p-150000.3.70.1.s390x"
        },
        "product_reference": "openssl-1_0_0-1.0.2p-150000.3.70.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Legacy 15 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64 as component of SUSE Linux Enterprise Module for Legacy 15 SP4",
          "product_id": "SUSE Linux Enterprise Module for Legacy 15 SP4:openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64"
        },
        "product_reference": "openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Legacy 15 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64 as component of SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64 as component of SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl10-1.0.2p-150000.3.70.1.aarch64 as component of SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl10-1.0.2p-150000.3.70.1.aarch64"
        },
        "product_reference": "libopenssl10-1.0.2p-150000.3.70.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl10-1.0.2p-150000.3.70.1.x86_64 as component of SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl10-1.0.2p-150000.3.70.1.x86_64"
        },
        "product_reference": "libopenssl10-1.0.2p-150000.3.70.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64 as component of SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64"
        },
        "product_reference": "libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64 as component of SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64"
        },
        "product_reference": "libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64 as component of SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64"
        },
        "product_reference": "openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64 as component of SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64"
        },
        "product_reference": "openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64 as component of SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64 as component of SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl10-1.0.2p-150000.3.70.1.aarch64 as component of SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl10-1.0.2p-150000.3.70.1.aarch64"
        },
        "product_reference": "libopenssl10-1.0.2p-150000.3.70.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl10-1.0.2p-150000.3.70.1.x86_64 as component of SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl10-1.0.2p-150000.3.70.1.x86_64"
        },
        "product_reference": "libopenssl10-1.0.2p-150000.3.70.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64 as component of SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64"
        },
        "product_reference": "libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64 as component of SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64"
        },
        "product_reference": "libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64 as component of SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64"
        },
        "product_reference": "openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64 as component of SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64"
        },
        "product_reference": "openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64 as component of SUSE Linux Enterprise Server 15 SP1-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP1-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.ppc64le as component of SUSE Linux Enterprise Server 15 SP1-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.ppc64le"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP1-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.s390x as component of SUSE Linux Enterprise Server 15 SP1-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.s390x"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP1-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64 as component of SUSE Linux Enterprise Server 15 SP1-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP1-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64 as component of SUSE Linux Enterprise Server 15 SP1-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64"
        },
        "product_reference": "libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP1-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2p-150000.3.70.1.ppc64le as component of SUSE Linux Enterprise Server 15 SP1-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.ppc64le"
        },
        "product_reference": "libopenssl1_0_0-1.0.2p-150000.3.70.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP1-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2p-150000.3.70.1.s390x as component of SUSE Linux Enterprise Server 15 SP1-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.s390x"
        },
        "product_reference": "libopenssl1_0_0-1.0.2p-150000.3.70.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP1-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64 as component of SUSE Linux Enterprise Server 15 SP1-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64"
        },
        "product_reference": "libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP1-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64 as component of SUSE Linux Enterprise Server 15 SP1-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP1-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64"
        },
        "product_reference": "openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP1-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-1.0.2p-150000.3.70.1.ppc64le as component of SUSE Linux Enterprise Server 15 SP1-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP1-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.ppc64le"
        },
        "product_reference": "openssl-1_0_0-1.0.2p-150000.3.70.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP1-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-1.0.2p-150000.3.70.1.s390x as component of SUSE Linux Enterprise Server 15 SP1-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP1-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.s390x"
        },
        "product_reference": "openssl-1_0_0-1.0.2p-150000.3.70.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP1-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64 as component of SUSE Linux Enterprise Server 15 SP1-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP1-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64"
        },
        "product_reference": "openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP1-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64 as component of SUSE Linux Enterprise Server 15 SP2-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP2-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.ppc64le as component of SUSE Linux Enterprise Server 15 SP2-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.ppc64le"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP2-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.s390x as component of SUSE Linux Enterprise Server 15 SP2-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.s390x"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP2-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64 as component of SUSE Linux Enterprise Server 15 SP2-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP2-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64 as component of SUSE Linux Enterprise Server 15 SP2-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64"
        },
        "product_reference": "libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP2-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2p-150000.3.70.1.ppc64le as component of SUSE Linux Enterprise Server 15 SP2-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.ppc64le"
        },
        "product_reference": "libopenssl1_0_0-1.0.2p-150000.3.70.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP2-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2p-150000.3.70.1.s390x as component of SUSE Linux Enterprise Server 15 SP2-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.s390x"
        },
        "product_reference": "libopenssl1_0_0-1.0.2p-150000.3.70.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP2-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64 as component of SUSE Linux Enterprise Server 15 SP2-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64"
        },
        "product_reference": "libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP2-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64 as component of SUSE Linux Enterprise Server 15 SP2-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64"
        },
        "product_reference": "openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP2-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-1.0.2p-150000.3.70.1.ppc64le as component of SUSE Linux Enterprise Server 15 SP2-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.ppc64le"
        },
        "product_reference": "openssl-1_0_0-1.0.2p-150000.3.70.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP2-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-1.0.2p-150000.3.70.1.s390x as component of SUSE Linux Enterprise Server 15 SP2-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.s390x"
        },
        "product_reference": "openssl-1_0_0-1.0.2p-150000.3.70.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP2-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64 as component of SUSE Linux Enterprise Server 15 SP2-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64"
        },
        "product_reference": "openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP2-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64 as component of SUSE Linux Enterprise Server 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.ppc64le as component of SUSE Linux Enterprise Server 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.ppc64le"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.s390x as component of SUSE Linux Enterprise Server 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.s390x"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64 as component of SUSE Linux Enterprise Server 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl10-1.0.2p-150000.3.70.1.aarch64 as component of SUSE Linux Enterprise Server 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl10-1.0.2p-150000.3.70.1.aarch64"
        },
        "product_reference": "libopenssl10-1.0.2p-150000.3.70.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl10-1.0.2p-150000.3.70.1.ppc64le as component of SUSE Linux Enterprise Server 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl10-1.0.2p-150000.3.70.1.ppc64le"
        },
        "product_reference": "libopenssl10-1.0.2p-150000.3.70.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl10-1.0.2p-150000.3.70.1.s390x as component of SUSE Linux Enterprise Server 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl10-1.0.2p-150000.3.70.1.s390x"
        },
        "product_reference": "libopenssl10-1.0.2p-150000.3.70.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl10-1.0.2p-150000.3.70.1.x86_64 as component of SUSE Linux Enterprise Server 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl10-1.0.2p-150000.3.70.1.x86_64"
        },
        "product_reference": "libopenssl10-1.0.2p-150000.3.70.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64 as component of SUSE Linux Enterprise Server 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64"
        },
        "product_reference": "libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2p-150000.3.70.1.ppc64le as component of SUSE Linux Enterprise Server 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.ppc64le"
        },
        "product_reference": "libopenssl1_0_0-1.0.2p-150000.3.70.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2p-150000.3.70.1.s390x as component of SUSE Linux Enterprise Server 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.s390x"
        },
        "product_reference": "libopenssl1_0_0-1.0.2p-150000.3.70.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64 as component of SUSE Linux Enterprise Server 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64"
        },
        "product_reference": "libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64 as component of SUSE Linux Enterprise Server 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64"
        },
        "product_reference": "openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-1.0.2p-150000.3.70.1.ppc64le as component of SUSE Linux Enterprise Server 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.ppc64le"
        },
        "product_reference": "openssl-1_0_0-1.0.2p-150000.3.70.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-1.0.2p-150000.3.70.1.s390x as component of SUSE Linux Enterprise Server 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.s390x"
        },
        "product_reference": "openssl-1_0_0-1.0.2p-150000.3.70.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64 as component of SUSE Linux Enterprise Server 15 SP3-LTSS",
          "product_id": "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64"
        },
        "product_reference": "openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 15 SP3-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.ppc64le as component of SUSE Linux Enterprise Server for SAP Applications 15 SP1",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP1:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.ppc64le"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP1"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 15 SP1",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP1:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP1"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2p-150000.3.70.1.ppc64le as component of SUSE Linux Enterprise Server for SAP Applications 15 SP1",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP1:libopenssl1_0_0-1.0.2p-150000.3.70.1.ppc64le"
        },
        "product_reference": "libopenssl1_0_0-1.0.2p-150000.3.70.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP1"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 15 SP1",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP1:libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64"
        },
        "product_reference": "libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP1"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-1.0.2p-150000.3.70.1.ppc64le as component of SUSE Linux Enterprise Server for SAP Applications 15 SP1",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP1:openssl-1_0_0-1.0.2p-150000.3.70.1.ppc64le"
        },
        "product_reference": "openssl-1_0_0-1.0.2p-150000.3.70.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP1"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 15 SP1",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP1:openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64"
        },
        "product_reference": "openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP1"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.ppc64le as component of SUSE Linux Enterprise Server for SAP Applications 15 SP2",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.ppc64le"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP2"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 15 SP2",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP2"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2p-150000.3.70.1.ppc64le as component of SUSE Linux Enterprise Server for SAP Applications 15 SP2",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_0_0-1.0.2p-150000.3.70.1.ppc64le"
        },
        "product_reference": "libopenssl1_0_0-1.0.2p-150000.3.70.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP2"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 15 SP2",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64"
        },
        "product_reference": "libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP2"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-1.0.2p-150000.3.70.1.ppc64le as component of SUSE Linux Enterprise Server for SAP Applications 15 SP2",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP2:openssl-1_0_0-1.0.2p-150000.3.70.1.ppc64le"
        },
        "product_reference": "openssl-1_0_0-1.0.2p-150000.3.70.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP2"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 15 SP2",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP2:openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64"
        },
        "product_reference": "openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP2"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.ppc64le as component of SUSE Linux Enterprise Server for SAP Applications 15 SP3",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.ppc64le"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP3"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 15 SP3",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP3"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl10-1.0.2p-150000.3.70.1.ppc64le as component of SUSE Linux Enterprise Server for SAP Applications 15 SP3",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl10-1.0.2p-150000.3.70.1.ppc64le"
        },
        "product_reference": "libopenssl10-1.0.2p-150000.3.70.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP3"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl10-1.0.2p-150000.3.70.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 15 SP3",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl10-1.0.2p-150000.3.70.1.x86_64"
        },
        "product_reference": "libopenssl10-1.0.2p-150000.3.70.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP3"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2p-150000.3.70.1.ppc64le as component of SUSE Linux Enterprise Server for SAP Applications 15 SP3",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_0_0-1.0.2p-150000.3.70.1.ppc64le"
        },
        "product_reference": "libopenssl1_0_0-1.0.2p-150000.3.70.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP3"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 15 SP3",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64"
        },
        "product_reference": "libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP3"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-1.0.2p-150000.3.70.1.ppc64le as component of SUSE Linux Enterprise Server for SAP Applications 15 SP3",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP3:openssl-1_0_0-1.0.2p-150000.3.70.1.ppc64le"
        },
        "product_reference": "openssl-1_0_0-1.0.2p-150000.3.70.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP3"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 15 SP3",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 15 SP3:openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64"
        },
        "product_reference": "openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 15 SP3"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64 as component of SUSE Enterprise Storage 7",
          "product_id": "SUSE Enterprise Storage 7:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64",
        "relates_to_product_reference": "SUSE Enterprise Storage 7"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64 as component of SUSE Enterprise Storage 7",
          "product_id": "SUSE Enterprise Storage 7:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64",
        "relates_to_product_reference": "SUSE Enterprise Storage 7"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64 as component of SUSE Enterprise Storage 7",
          "product_id": "SUSE Enterprise Storage 7:libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64"
        },
        "product_reference": "libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64",
        "relates_to_product_reference": "SUSE Enterprise Storage 7"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64 as component of SUSE Enterprise Storage 7",
          "product_id": "SUSE Enterprise Storage 7:libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64"
        },
        "product_reference": "libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64",
        "relates_to_product_reference": "SUSE Enterprise Storage 7"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64 as component of SUSE Enterprise Storage 7",
          "product_id": "SUSE Enterprise Storage 7:openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64"
        },
        "product_reference": "openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64",
        "relates_to_product_reference": "SUSE Enterprise Storage 7"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64 as component of SUSE Enterprise Storage 7",
          "product_id": "SUSE Enterprise Storage 7:openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64"
        },
        "product_reference": "openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64",
        "relates_to_product_reference": "SUSE Enterprise Storage 7"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64 as component of SUSE Enterprise Storage 7.1",
          "product_id": "SUSE Enterprise Storage 7.1:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64",
        "relates_to_product_reference": "SUSE Enterprise Storage 7.1"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64 as component of SUSE Enterprise Storage 7.1",
          "product_id": "SUSE Enterprise Storage 7.1:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64",
        "relates_to_product_reference": "SUSE Enterprise Storage 7.1"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl10-1.0.2p-150000.3.70.1.aarch64 as component of SUSE Enterprise Storage 7.1",
          "product_id": "SUSE Enterprise Storage 7.1:libopenssl10-1.0.2p-150000.3.70.1.aarch64"
        },
        "product_reference": "libopenssl10-1.0.2p-150000.3.70.1.aarch64",
        "relates_to_product_reference": "SUSE Enterprise Storage 7.1"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl10-1.0.2p-150000.3.70.1.x86_64 as component of SUSE Enterprise Storage 7.1",
          "product_id": "SUSE Enterprise Storage 7.1:libopenssl10-1.0.2p-150000.3.70.1.x86_64"
        },
        "product_reference": "libopenssl10-1.0.2p-150000.3.70.1.x86_64",
        "relates_to_product_reference": "SUSE Enterprise Storage 7.1"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64 as component of SUSE Enterprise Storage 7.1",
          "product_id": "SUSE Enterprise Storage 7.1:libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64"
        },
        "product_reference": "libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64",
        "relates_to_product_reference": "SUSE Enterprise Storage 7.1"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64 as component of SUSE Enterprise Storage 7.1",
          "product_id": "SUSE Enterprise Storage 7.1:libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64"
        },
        "product_reference": "libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64",
        "relates_to_product_reference": "SUSE Enterprise Storage 7.1"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64 as component of SUSE Enterprise Storage 7.1",
          "product_id": "SUSE Enterprise Storage 7.1:openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64"
        },
        "product_reference": "openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64",
        "relates_to_product_reference": "SUSE Enterprise Storage 7.1"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64 as component of SUSE Enterprise Storage 7.1",
          "product_id": "SUSE Enterprise Storage 7.1:openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64"
        },
        "product_reference": "openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64",
        "relates_to_product_reference": "SUSE Enterprise Storage 7.1"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64 as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.ppc64le as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.ppc64le"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.ppc64le",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.s390x as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.s390x"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.s390x",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64 as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-32bit-1.0.2p-150000.3.70.1.x86_64 as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:libopenssl-1_0_0-devel-32bit-1.0.2p-150000.3.70.1.x86_64"
        },
        "product_reference": "libopenssl-1_0_0-devel-32bit-1.0.2p-150000.3.70.1.x86_64",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl10-1.0.2p-150000.3.70.1.aarch64 as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:libopenssl10-1.0.2p-150000.3.70.1.aarch64"
        },
        "product_reference": "libopenssl10-1.0.2p-150000.3.70.1.aarch64",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl10-1.0.2p-150000.3.70.1.ppc64le as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:libopenssl10-1.0.2p-150000.3.70.1.ppc64le"
        },
        "product_reference": "libopenssl10-1.0.2p-150000.3.70.1.ppc64le",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl10-1.0.2p-150000.3.70.1.s390x as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:libopenssl10-1.0.2p-150000.3.70.1.s390x"
        },
        "product_reference": "libopenssl10-1.0.2p-150000.3.70.1.s390x",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl10-1.0.2p-150000.3.70.1.x86_64 as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:libopenssl10-1.0.2p-150000.3.70.1.x86_64"
        },
        "product_reference": "libopenssl10-1.0.2p-150000.3.70.1.x86_64",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64 as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64"
        },
        "product_reference": "libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2p-150000.3.70.1.ppc64le as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:libopenssl1_0_0-1.0.2p-150000.3.70.1.ppc64le"
        },
        "product_reference": "libopenssl1_0_0-1.0.2p-150000.3.70.1.ppc64le",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2p-150000.3.70.1.s390x as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:libopenssl1_0_0-1.0.2p-150000.3.70.1.s390x"
        },
        "product_reference": "libopenssl1_0_0-1.0.2p-150000.3.70.1.s390x",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64 as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64"
        },
        "product_reference": "libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-32bit-1.0.2p-150000.3.70.1.x86_64 as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:libopenssl1_0_0-32bit-1.0.2p-150000.3.70.1.x86_64"
        },
        "product_reference": "libopenssl1_0_0-32bit-1.0.2p-150000.3.70.1.x86_64",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.aarch64 as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.aarch64"
        },
        "product_reference": "libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.aarch64",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.ppc64le as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.ppc64le"
        },
        "product_reference": "libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.ppc64le",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.s390x as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.s390x"
        },
        "product_reference": "libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.s390x",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.x86_64 as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.x86_64"
        },
        "product_reference": "libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.x86_64",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-hmac-32bit-1.0.2p-150000.3.70.1.x86_64 as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:libopenssl1_0_0-hmac-32bit-1.0.2p-150000.3.70.1.x86_64"
        },
        "product_reference": "libopenssl1_0_0-hmac-32bit-1.0.2p-150000.3.70.1.x86_64",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-steam-1.0.2p-150000.3.70.1.aarch64 as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:libopenssl1_0_0-steam-1.0.2p-150000.3.70.1.aarch64"
        },
        "product_reference": "libopenssl1_0_0-steam-1.0.2p-150000.3.70.1.aarch64",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-steam-1.0.2p-150000.3.70.1.ppc64le as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:libopenssl1_0_0-steam-1.0.2p-150000.3.70.1.ppc64le"
        },
        "product_reference": "libopenssl1_0_0-steam-1.0.2p-150000.3.70.1.ppc64le",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-steam-1.0.2p-150000.3.70.1.s390x as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:libopenssl1_0_0-steam-1.0.2p-150000.3.70.1.s390x"
        },
        "product_reference": "libopenssl1_0_0-steam-1.0.2p-150000.3.70.1.s390x",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-steam-1.0.2p-150000.3.70.1.x86_64 as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:libopenssl1_0_0-steam-1.0.2p-150000.3.70.1.x86_64"
        },
        "product_reference": "libopenssl1_0_0-steam-1.0.2p-150000.3.70.1.x86_64",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-steam-32bit-1.0.2p-150000.3.70.1.x86_64 as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:libopenssl1_0_0-steam-32bit-1.0.2p-150000.3.70.1.x86_64"
        },
        "product_reference": "libopenssl1_0_0-steam-32bit-1.0.2p-150000.3.70.1.x86_64",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64 as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64"
        },
        "product_reference": "openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-1.0.2p-150000.3.70.1.ppc64le as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:openssl-1_0_0-1.0.2p-150000.3.70.1.ppc64le"
        },
        "product_reference": "openssl-1_0_0-1.0.2p-150000.3.70.1.ppc64le",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-1.0.2p-150000.3.70.1.s390x as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:openssl-1_0_0-1.0.2p-150000.3.70.1.s390x"
        },
        "product_reference": "openssl-1_0_0-1.0.2p-150000.3.70.1.s390x",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64 as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64"
        },
        "product_reference": "openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-cavs-1.0.2p-150000.3.70.1.aarch64 as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:openssl-1_0_0-cavs-1.0.2p-150000.3.70.1.aarch64"
        },
        "product_reference": "openssl-1_0_0-cavs-1.0.2p-150000.3.70.1.aarch64",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-cavs-1.0.2p-150000.3.70.1.ppc64le as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:openssl-1_0_0-cavs-1.0.2p-150000.3.70.1.ppc64le"
        },
        "product_reference": "openssl-1_0_0-cavs-1.0.2p-150000.3.70.1.ppc64le",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-cavs-1.0.2p-150000.3.70.1.s390x as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:openssl-1_0_0-cavs-1.0.2p-150000.3.70.1.s390x"
        },
        "product_reference": "openssl-1_0_0-cavs-1.0.2p-150000.3.70.1.s390x",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-cavs-1.0.2p-150000.3.70.1.x86_64 as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:openssl-1_0_0-cavs-1.0.2p-150000.3.70.1.x86_64"
        },
        "product_reference": "openssl-1_0_0-cavs-1.0.2p-150000.3.70.1.x86_64",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-doc-1.0.2p-150000.3.70.1.noarch as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:openssl-1_0_0-doc-1.0.2p-150000.3.70.1.noarch"
        },
        "product_reference": "openssl-1_0_0-doc-1.0.2p-150000.3.70.1.noarch",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2023-0464",
      "ids": [
        {
          "system_name": "SUSE CVE Page",
          "text": "https://www.suse.com/security/cve/CVE-2023-0464"
        }
      ],
      "notes": [
        {
          "category": "general",
          "text": "A security vulnerability has been identified in all supported versions\n\nof OpenSSL related to the verification of X.509 certificate chains\nthat include policy constraints.  Attackers may be able to exploit this\nvulnerability by creating a malicious certificate chain that triggers\nexponential use of computational resources, leading to a denial-of-service\n(DoS) attack on affected systems.\n\nPolicy processing is disabled by default but can be enabled by passing\nthe `-policy\u0027 argument to the command line utilities or by calling the\n`X509_VERIFY_PARAM_set1_policies()\u0027 function.",
          "title": "CVE description"
        }
      ],
      "product_status": {
        "recommended": [
          "SUSE Enterprise Storage 7.1:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64",
          "SUSE Enterprise Storage 7.1:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64",
          "SUSE Enterprise Storage 7.1:libopenssl10-1.0.2p-150000.3.70.1.aarch64",
          "SUSE Enterprise Storage 7.1:libopenssl10-1.0.2p-150000.3.70.1.x86_64",
          "SUSE Enterprise Storage 7.1:libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64",
          "SUSE Enterprise Storage 7.1:libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64",
          "SUSE Enterprise Storage 7.1:openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64",
          "SUSE Enterprise Storage 7.1:openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64",
          "SUSE Enterprise Storage 7:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64",
          "SUSE Enterprise Storage 7:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64",
          "SUSE Enterprise Storage 7:libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64",
          "SUSE Enterprise Storage 7:libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64",
          "SUSE Enterprise Storage 7:openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64",
          "SUSE Enterprise Storage 7:openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl10-1.0.2p-150000.3.70.1.aarch64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl10-1.0.2p-150000.3.70.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl10-1.0.2p-150000.3.70.1.aarch64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl10-1.0.2p-150000.3.70.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64",
          "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64",
          "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64",
          "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.ppc64le",
          "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.s390x",
          "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64",
          "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl10-1.0.2p-150000.3.70.1.aarch64",
          "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl10-1.0.2p-150000.3.70.1.ppc64le",
          "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl10-1.0.2p-150000.3.70.1.s390x",
          "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl10-1.0.2p-150000.3.70.1.x86_64",
          "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64",
          "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl1_0_0-1.0.2p-150000.3.70.1.ppc64le",
          "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl1_0_0-1.0.2p-150000.3.70.1.s390x",
          "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64",
          "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.aarch64",
          "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.ppc64le",
          "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.s390x",
          "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.x86_64",
          "SUSE Linux Enterprise Module for Legacy 15 SP4:openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64",
          "SUSE Linux Enterprise Module for Legacy 15 SP4:openssl-1_0_0-1.0.2p-150000.3.70.1.ppc64le",
          "SUSE Linux Enterprise Module for Legacy 15 SP4:openssl-1_0_0-1.0.2p-150000.3.70.1.s390x",
          "SUSE Linux Enterprise Module for Legacy 15 SP4:openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64",
          "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.ppc64le",
          "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.s390x",
          "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64",
          "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.ppc64le",
          "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.s390x",
          "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP1-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64",
          "SUSE Linux Enterprise Server 15 SP1-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.ppc64le",
          "SUSE Linux Enterprise Server 15 SP1-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.s390x",
          "SUSE Linux Enterprise Server 15 SP1-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.ppc64le",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.s390x",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.ppc64le",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.s390x",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.ppc64le",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.s390x",
          "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.ppc64le",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.s390x",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl10-1.0.2p-150000.3.70.1.aarch64",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl10-1.0.2p-150000.3.70.1.ppc64le",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl10-1.0.2p-150000.3.70.1.s390x",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl10-1.0.2p-150000.3.70.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.ppc64le",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.s390x",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.ppc64le",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.s390x",
          "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP1:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.ppc64le",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP1:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP1:libopenssl1_0_0-1.0.2p-150000.3.70.1.ppc64le",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP1:libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP1:openssl-1_0_0-1.0.2p-150000.3.70.1.ppc64le",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP1:openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.ppc64le",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_0_0-1.0.2p-150000.3.70.1.ppc64le",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP2:openssl-1_0_0-1.0.2p-150000.3.70.1.ppc64le",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP2:openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.ppc64le",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl10-1.0.2p-150000.3.70.1.ppc64le",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl10-1.0.2p-150000.3.70.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_0_0-1.0.2p-150000.3.70.1.ppc64le",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP3:openssl-1_0_0-1.0.2p-150000.3.70.1.ppc64le",
          "SUSE Linux Enterprise Server for SAP Applications 15 SP3:openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64",
          "openSUSE Leap 15.4:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64",
          "openSUSE Leap 15.4:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.ppc64le",
          "openSUSE Leap 15.4:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.s390x",
          "openSUSE Leap 15.4:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64",
          "openSUSE Leap 15.4:libopenssl-1_0_0-devel-32bit-1.0.2p-150000.3.70.1.x86_64",
          "openSUSE Leap 15.4:libopenssl10-1.0.2p-150000.3.70.1.aarch64",
          "openSUSE Leap 15.4:libopenssl10-1.0.2p-150000.3.70.1.ppc64le",
          "openSUSE Leap 15.4:libopenssl10-1.0.2p-150000.3.70.1.s390x",
          "openSUSE Leap 15.4:libopenssl10-1.0.2p-150000.3.70.1.x86_64",
          "openSUSE Leap 15.4:libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64",
          "openSUSE Leap 15.4:libopenssl1_0_0-1.0.2p-150000.3.70.1.ppc64le",
          "openSUSE Leap 15.4:libopenssl1_0_0-1.0.2p-150000.3.70.1.s390x",
          "openSUSE Leap 15.4:libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64",
          "openSUSE Leap 15.4:libopenssl1_0_0-32bit-1.0.2p-150000.3.70.1.x86_64",
          "openSUSE Leap 15.4:libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.aarch64",
          "openSUSE Leap 15.4:libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.ppc64le",
          "openSUSE Leap 15.4:libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.s390x",
          "openSUSE Leap 15.4:libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.x86_64",
          "openSUSE Leap 15.4:libopenssl1_0_0-hmac-32bit-1.0.2p-150000.3.70.1.x86_64",
          "openSUSE Leap 15.4:libopenssl1_0_0-steam-1.0.2p-150000.3.70.1.aarch64",
          "openSUSE Leap 15.4:libopenssl1_0_0-steam-1.0.2p-150000.3.70.1.ppc64le",
          "openSUSE Leap 15.4:libopenssl1_0_0-steam-1.0.2p-150000.3.70.1.s390x",
          "openSUSE Leap 15.4:libopenssl1_0_0-steam-1.0.2p-150000.3.70.1.x86_64",
          "openSUSE Leap 15.4:libopenssl1_0_0-steam-32bit-1.0.2p-150000.3.70.1.x86_64",
          "openSUSE Leap 15.4:openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64",
          "openSUSE Leap 15.4:openssl-1_0_0-1.0.2p-150000.3.70.1.ppc64le",
          "openSUSE Leap 15.4:openssl-1_0_0-1.0.2p-150000.3.70.1.s390x",
          "openSUSE Leap 15.4:openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64",
          "openSUSE Leap 15.4:openssl-1_0_0-cavs-1.0.2p-150000.3.70.1.aarch64",
          "openSUSE Leap 15.4:openssl-1_0_0-cavs-1.0.2p-150000.3.70.1.ppc64le",
          "openSUSE Leap 15.4:openssl-1_0_0-cavs-1.0.2p-150000.3.70.1.s390x",
          "openSUSE Leap 15.4:openssl-1_0_0-cavs-1.0.2p-150000.3.70.1.x86_64",
          "openSUSE Leap 15.4:openssl-1_0_0-doc-1.0.2p-150000.3.70.1.noarch"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "CVE-2023-0464",
          "url": "https://www.suse.com/security/cve/CVE-2023-0464"
        },
        {
          "category": "external",
          "summary": "SUSE Bug 1209624 for CVE-2023-0464",
          "url": "https://bugzilla.suse.com/1209624"
        },
        {
          "category": "external",
          "summary": "SUSE Bug 1225628 for CVE-2023-0464",
          "url": "https://bugzilla.suse.com/1225628"
        }
      ],
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or \"zypper patch\".\n",
          "product_ids": [
            "SUSE Enterprise Storage 7.1:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Enterprise Storage 7.1:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Enterprise Storage 7.1:libopenssl10-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Enterprise Storage 7.1:libopenssl10-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Enterprise Storage 7.1:libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Enterprise Storage 7.1:libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Enterprise Storage 7.1:openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Enterprise Storage 7.1:openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Enterprise Storage 7:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Enterprise Storage 7:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Enterprise Storage 7:libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Enterprise Storage 7:libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Enterprise Storage 7:openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Enterprise Storage 7:openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl10-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl10-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl10-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl10-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.ppc64le",
            "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.s390x",
            "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl10-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl10-1.0.2p-150000.3.70.1.ppc64le",
            "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl10-1.0.2p-150000.3.70.1.s390x",
            "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl10-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl1_0_0-1.0.2p-150000.3.70.1.ppc64le",
            "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl1_0_0-1.0.2p-150000.3.70.1.s390x",
            "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.ppc64le",
            "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.s390x",
            "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise Module for Legacy 15 SP4:openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Linux Enterprise Module for Legacy 15 SP4:openssl-1_0_0-1.0.2p-150000.3.70.1.ppc64le",
            "SUSE Linux Enterprise Module for Legacy 15 SP4:openssl-1_0_0-1.0.2p-150000.3.70.1.s390x",
            "SUSE Linux Enterprise Module for Legacy 15 SP4:openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.s390x",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.s390x",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.s390x",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.s390x",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.s390x",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.s390x",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.s390x",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl10-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl10-1.0.2p-150000.3.70.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl10-1.0.2p-150000.3.70.1.s390x",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl10-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.s390x",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.s390x",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP1:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP1:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP1:libopenssl1_0_0-1.0.2p-150000.3.70.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP1:libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP1:openssl-1_0_0-1.0.2p-150000.3.70.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP1:openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_0_0-1.0.2p-150000.3.70.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:openssl-1_0_0-1.0.2p-150000.3.70.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl10-1.0.2p-150000.3.70.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl10-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_0_0-1.0.2p-150000.3.70.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:openssl-1_0_0-1.0.2p-150000.3.70.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64",
            "openSUSE Leap 15.4:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64",
            "openSUSE Leap 15.4:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.ppc64le",
            "openSUSE Leap 15.4:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.s390x",
            "openSUSE Leap 15.4:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64",
            "openSUSE Leap 15.4:libopenssl-1_0_0-devel-32bit-1.0.2p-150000.3.70.1.x86_64",
            "openSUSE Leap 15.4:libopenssl10-1.0.2p-150000.3.70.1.aarch64",
            "openSUSE Leap 15.4:libopenssl10-1.0.2p-150000.3.70.1.ppc64le",
            "openSUSE Leap 15.4:libopenssl10-1.0.2p-150000.3.70.1.s390x",
            "openSUSE Leap 15.4:libopenssl10-1.0.2p-150000.3.70.1.x86_64",
            "openSUSE Leap 15.4:libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64",
            "openSUSE Leap 15.4:libopenssl1_0_0-1.0.2p-150000.3.70.1.ppc64le",
            "openSUSE Leap 15.4:libopenssl1_0_0-1.0.2p-150000.3.70.1.s390x",
            "openSUSE Leap 15.4:libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64",
            "openSUSE Leap 15.4:libopenssl1_0_0-32bit-1.0.2p-150000.3.70.1.x86_64",
            "openSUSE Leap 15.4:libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.aarch64",
            "openSUSE Leap 15.4:libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.ppc64le",
            "openSUSE Leap 15.4:libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.s390x",
            "openSUSE Leap 15.4:libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.x86_64",
            "openSUSE Leap 15.4:libopenssl1_0_0-hmac-32bit-1.0.2p-150000.3.70.1.x86_64",
            "openSUSE Leap 15.4:libopenssl1_0_0-steam-1.0.2p-150000.3.70.1.aarch64",
            "openSUSE Leap 15.4:libopenssl1_0_0-steam-1.0.2p-150000.3.70.1.ppc64le",
            "openSUSE Leap 15.4:libopenssl1_0_0-steam-1.0.2p-150000.3.70.1.s390x",
            "openSUSE Leap 15.4:libopenssl1_0_0-steam-1.0.2p-150000.3.70.1.x86_64",
            "openSUSE Leap 15.4:libopenssl1_0_0-steam-32bit-1.0.2p-150000.3.70.1.x86_64",
            "openSUSE Leap 15.4:openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64",
            "openSUSE Leap 15.4:openssl-1_0_0-1.0.2p-150000.3.70.1.ppc64le",
            "openSUSE Leap 15.4:openssl-1_0_0-1.0.2p-150000.3.70.1.s390x",
            "openSUSE Leap 15.4:openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64",
            "openSUSE Leap 15.4:openssl-1_0_0-cavs-1.0.2p-150000.3.70.1.aarch64",
            "openSUSE Leap 15.4:openssl-1_0_0-cavs-1.0.2p-150000.3.70.1.ppc64le",
            "openSUSE Leap 15.4:openssl-1_0_0-cavs-1.0.2p-150000.3.70.1.s390x",
            "openSUSE Leap 15.4:openssl-1_0_0-cavs-1.0.2p-150000.3.70.1.x86_64",
            "openSUSE Leap 15.4:openssl-1_0_0-doc-1.0.2p-150000.3.70.1.noarch"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "SUSE Enterprise Storage 7.1:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Enterprise Storage 7.1:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Enterprise Storage 7.1:libopenssl10-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Enterprise Storage 7.1:libopenssl10-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Enterprise Storage 7.1:libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Enterprise Storage 7.1:libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Enterprise Storage 7.1:openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Enterprise Storage 7.1:openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Enterprise Storage 7:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Enterprise Storage 7:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Enterprise Storage 7:libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Enterprise Storage 7:libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Enterprise Storage 7:openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Enterprise Storage 7:openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl10-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl10-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-ESPOS:openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl10-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl10-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Linux Enterprise High Performance Computing 15 SP3-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.ppc64le",
            "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.s390x",
            "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl10-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl10-1.0.2p-150000.3.70.1.ppc64le",
            "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl10-1.0.2p-150000.3.70.1.s390x",
            "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl10-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl1_0_0-1.0.2p-150000.3.70.1.ppc64le",
            "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl1_0_0-1.0.2p-150000.3.70.1.s390x",
            "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.ppc64le",
            "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.s390x",
            "SUSE Linux Enterprise Module for Legacy 15 SP4:libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise Module for Legacy 15 SP4:openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Linux Enterprise Module for Legacy 15 SP4:openssl-1_0_0-1.0.2p-150000.3.70.1.ppc64le",
            "SUSE Linux Enterprise Module for Legacy 15 SP4:openssl-1_0_0-1.0.2p-150000.3.70.1.s390x",
            "SUSE Linux Enterprise Module for Legacy 15 SP4:openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.s390x",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.s390x",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.s390x",
            "SUSE Linux Enterprise Server 15 SP1-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.s390x",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.s390x",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.s390x",
            "SUSE Linux Enterprise Server 15 SP2-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.s390x",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl10-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl10-1.0.2p-150000.3.70.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl10-1.0.2p-150000.3.70.1.s390x",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl10-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.s390x",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.ppc64le",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.s390x",
            "SUSE Linux Enterprise Server 15 SP3-LTSS:openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP1:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP1:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP1:libopenssl1_0_0-1.0.2p-150000.3.70.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP1:libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP1:openssl-1_0_0-1.0.2p-150000.3.70.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP1:openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_0_0-1.0.2p-150000.3.70.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:openssl-1_0_0-1.0.2p-150000.3.70.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP2:openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl10-1.0.2p-150000.3.70.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl10-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_0_0-1.0.2p-150000.3.70.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:openssl-1_0_0-1.0.2p-150000.3.70.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 15 SP3:openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64",
            "openSUSE Leap 15.4:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.aarch64",
            "openSUSE Leap 15.4:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.ppc64le",
            "openSUSE Leap 15.4:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.s390x",
            "openSUSE Leap 15.4:libopenssl-1_0_0-devel-1.0.2p-150000.3.70.1.x86_64",
            "openSUSE Leap 15.4:libopenssl-1_0_0-devel-32bit-1.0.2p-150000.3.70.1.x86_64",
            "openSUSE Leap 15.4:libopenssl10-1.0.2p-150000.3.70.1.aarch64",
            "openSUSE Leap 15.4:libopenssl10-1.0.2p-150000.3.70.1.ppc64le",
            "openSUSE Leap 15.4:libopenssl10-1.0.2p-150000.3.70.1.s390x",
            "openSUSE Leap 15.4:libopenssl10-1.0.2p-150000.3.70.1.x86_64",
            "openSUSE Leap 15.4:libopenssl1_0_0-1.0.2p-150000.3.70.1.aarch64",
            "openSUSE Leap 15.4:libopenssl1_0_0-1.0.2p-150000.3.70.1.ppc64le",
            "openSUSE Leap 15.4:libopenssl1_0_0-1.0.2p-150000.3.70.1.s390x",
            "openSUSE Leap 15.4:libopenssl1_0_0-1.0.2p-150000.3.70.1.x86_64",
            "openSUSE Leap 15.4:libopenssl1_0_0-32bit-1.0.2p-150000.3.70.1.x86_64",
            "openSUSE Leap 15.4:libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.aarch64",
            "openSUSE Leap 15.4:libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.ppc64le",
            "openSUSE Leap 15.4:libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.s390x",
            "openSUSE Leap 15.4:libopenssl1_0_0-hmac-1.0.2p-150000.3.70.1.x86_64",
            "openSUSE Leap 15.4:libopenssl1_0_0-hmac-32bit-1.0.2p-150000.3.70.1.x86_64",
            "openSUSE Leap 15.4:libopenssl1_0_0-steam-1.0.2p-150000.3.70.1.aarch64",
            "openSUSE Leap 15.4:libopenssl1_0_0-steam-1.0.2p-150000.3.70.1.ppc64le",
            "openSUSE Leap 15.4:libopenssl1_0_0-steam-1.0.2p-150000.3.70.1.s390x",
            "openSUSE Leap 15.4:libopenssl1_0_0-steam-1.0.2p-150000.3.70.1.x86_64",
            "openSUSE Leap 15.4:libopenssl1_0_0-steam-32bit-1.0.2p-150000.3.70.1.x86_64",
            "openSUSE Leap 15.4:openssl-1_0_0-1.0.2p-150000.3.70.1.aarch64",
            "openSUSE Leap 15.4:openssl-1_0_0-1.0.2p-150000.3.70.1.ppc64le",
            "openSUSE Leap 15.4:openssl-1_0_0-1.0.2p-150000.3.70.1.s390x",
            "openSUSE Leap 15.4:openssl-1_0_0-1.0.2p-150000.3.70.1.x86_64",
            "openSUSE Leap 15.4:openssl-1_0_0-cavs-1.0.2p-150000.3.70.1.aarch64",
            "openSUSE Leap 15.4:openssl-1_0_0-cavs-1.0.2p-150000.3.70.1.ppc64le",
            "openSUSE Leap 15.4:openssl-1_0_0-cavs-1.0.2p-150000.3.70.1.s390x",
            "openSUSE Leap 15.4:openssl-1_0_0-cavs-1.0.2p-150000.3.70.1.x86_64",
            "openSUSE Leap 15.4:openssl-1_0_0-doc-1.0.2p-150000.3.70.1.noarch"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "date": "2023-03-30T14:15:28Z",
          "details": "moderate"
        }
      ],
      "title": "CVE-2023-0464"
    }
  ]
}

{
  "document": {
    "aggregate_severity": {
      "namespace": "https://www.suse.com/support/security/rating/",
      "text": "moderate"
    },
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Copyright 2024 SUSE LLC. All rights reserved.",
      "tlp": {
        "label": "WHITE",
        "url": "https://www.first.org/tlp/"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "Security update for openssl1",
        "title": "Title of the patch"
      },
      {
        "category": "description",
        "text": "This update for openssl1 fixes the following issues:\n\n- CVE-2023-0464: Fixed excessive Resource Usage Verifying X.509 Policy Constraints (bsc#1209624).\n",
        "title": "Description of the patch"
      },
      {
        "category": "details",
        "text": "SUSE-2023-1754,SUSE-SLE-SERVER-11-SP4-LTSS-EXTREME-CORE-2023-1754",
        "title": "Patchnames"
      },
      {
        "category": "legal_disclaimer",
        "text": "CSAF 2.0 data is provided by SUSE under the Creative Commons License 4.0 with Attribution (CC-BY-4.0).",
        "title": "Terms of use"
      }
    ],
    "publisher": {
      "category": "vendor",
      "contact_details": "https://www.suse.com/support/security/contact/",
      "name": "SUSE Product Security Team",
      "namespace": "https://www.suse.com/"
    },
    "references": [
      {
        "category": "external",
        "summary": "SUSE ratings",
        "url": "https://www.suse.com/support/security/rating/"
      },
      {
        "category": "self",
        "summary": "URL of this CSAF notice",
        "url": "https://ftp.suse.com/pub/projects/security/csaf/suse-su-2023_1754-1.json"
      },
      {
        "category": "self",
        "summary": "URL for SUSE-SU-2023:1754-1",
        "url": "https://www.suse.com/support/update/announcement/2023/suse-su-20231754-1/"
      },
      {
        "category": "self",
        "summary": "E-Mail link for SUSE-SU-2023:1754-1",
        "url": "https://lists.suse.com/pipermail/sle-updates/2023-April/028619.html"
      },
      {
        "category": "self",
        "summary": "SUSE Bug 1209624",
        "url": "https://bugzilla.suse.com/1209624"
      },
      {
        "category": "self",
        "summary": "SUSE CVE CVE-2023-0464 page",
        "url": "https://www.suse.com/security/cve/CVE-2023-0464/"
      }
    ],
    "title": "Security update for openssl1",
    "tracking": {
      "current_release_date": "2023-04-04T10:03:45Z",
      "generator": {
        "date": "2023-04-04T10:03:45Z",
        "engine": {
          "name": "cve-database.git:bin/generate-csaf.pl",
          "version": "1"
        }
      },
      "id": "SUSE-SU-2023:1754-1",
      "initial_release_date": "2023-04-04T10:03:45Z",
      "revision_history": [
        {
          "date": "2023-04-04T10:03:45Z",
          "number": "1",
          "summary": "Current version"
        }
      ],
      "status": "final",
      "version": "1"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl1-devel-1.0.1g-0.58.59.1.i586",
                "product": {
                  "name": "libopenssl1-devel-1.0.1g-0.58.59.1.i586",
                  "product_id": "libopenssl1-devel-1.0.1g-0.58.59.1.i586"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-1.0.1g-0.58.59.1.i586",
                "product": {
                  "name": "libopenssl1_0_0-1.0.1g-0.58.59.1.i586",
                  "product_id": "libopenssl1_0_0-1.0.1g-0.58.59.1.i586"
                }
              },
              {
                "category": "product_version",
                "name": "openssl1-1.0.1g-0.58.59.1.i586",
                "product": {
                  "name": "openssl1-1.0.1g-0.58.59.1.i586",
                  "product_id": "openssl1-1.0.1g-0.58.59.1.i586"
                }
              },
              {
                "category": "product_version",
                "name": "openssl1-doc-1.0.1g-0.58.59.1.i586",
                "product": {
                  "name": "openssl1-doc-1.0.1g-0.58.59.1.i586",
                  "product_id": "openssl1-doc-1.0.1g-0.58.59.1.i586"
                }
              }
            ],
            "category": "architecture",
            "name": "i586"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl1-devel-1.0.1g-0.58.59.1.ia64",
                "product": {
                  "name": "libopenssl1-devel-1.0.1g-0.58.59.1.ia64",
                  "product_id": "libopenssl1-devel-1.0.1g-0.58.59.1.ia64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-1.0.1g-0.58.59.1.ia64",
                "product": {
                  "name": "libopenssl1_0_0-1.0.1g-0.58.59.1.ia64",
                  "product_id": "libopenssl1_0_0-1.0.1g-0.58.59.1.ia64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-x86-1.0.1g-0.58.59.1.ia64",
                "product": {
                  "name": "libopenssl1_0_0-x86-1.0.1g-0.58.59.1.ia64",
                  "product_id": "libopenssl1_0_0-x86-1.0.1g-0.58.59.1.ia64"
                }
              },
              {
                "category": "product_version",
                "name": "openssl1-1.0.1g-0.58.59.1.ia64",
                "product": {
                  "name": "openssl1-1.0.1g-0.58.59.1.ia64",
                  "product_id": "openssl1-1.0.1g-0.58.59.1.ia64"
                }
              },
              {
                "category": "product_version",
                "name": "openssl1-doc-1.0.1g-0.58.59.1.ia64",
                "product": {
                  "name": "openssl1-doc-1.0.1g-0.58.59.1.ia64",
                  "product_id": "openssl1-doc-1.0.1g-0.58.59.1.ia64"
                }
              }
            ],
            "category": "architecture",
            "name": "ia64"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl1-devel-1.0.1g-0.58.59.1.ppc",
                "product": {
                  "name": "libopenssl1-devel-1.0.1g-0.58.59.1.ppc",
                  "product_id": "libopenssl1-devel-1.0.1g-0.58.59.1.ppc"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1-devel-64bit-1.0.1g-0.58.59.1.ppc",
                "product": {
                  "name": "libopenssl1-devel-64bit-1.0.1g-0.58.59.1.ppc",
                  "product_id": "libopenssl1-devel-64bit-1.0.1g-0.58.59.1.ppc"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-1.0.1g-0.58.59.1.ppc",
                "product": {
                  "name": "libopenssl1_0_0-1.0.1g-0.58.59.1.ppc",
                  "product_id": "libopenssl1_0_0-1.0.1g-0.58.59.1.ppc"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-64bit-1.0.1g-0.58.59.1.ppc",
                "product": {
                  "name": "libopenssl1_0_0-64bit-1.0.1g-0.58.59.1.ppc",
                  "product_id": "libopenssl1_0_0-64bit-1.0.1g-0.58.59.1.ppc"
                }
              },
              {
                "category": "product_version",
                "name": "openssl1-1.0.1g-0.58.59.1.ppc",
                "product": {
                  "name": "openssl1-1.0.1g-0.58.59.1.ppc",
                  "product_id": "openssl1-1.0.1g-0.58.59.1.ppc"
                }
              },
              {
                "category": "product_version",
                "name": "openssl1-doc-1.0.1g-0.58.59.1.ppc",
                "product": {
                  "name": "openssl1-doc-1.0.1g-0.58.59.1.ppc",
                  "product_id": "openssl1-doc-1.0.1g-0.58.59.1.ppc"
                }
              }
            ],
            "category": "architecture",
            "name": "ppc"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl1-devel-1.0.1g-0.58.59.1.ppc64",
                "product": {
                  "name": "libopenssl1-devel-1.0.1g-0.58.59.1.ppc64",
                  "product_id": "libopenssl1-devel-1.0.1g-0.58.59.1.ppc64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1-devel-32bit-1.0.1g-0.58.59.1.ppc64",
                "product": {
                  "name": "libopenssl1-devel-32bit-1.0.1g-0.58.59.1.ppc64",
                  "product_id": "libopenssl1-devel-32bit-1.0.1g-0.58.59.1.ppc64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-1.0.1g-0.58.59.1.ppc64",
                "product": {
                  "name": "libopenssl1_0_0-1.0.1g-0.58.59.1.ppc64",
                  "product_id": "libopenssl1_0_0-1.0.1g-0.58.59.1.ppc64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-32bit-1.0.1g-0.58.59.1.ppc64",
                "product": {
                  "name": "libopenssl1_0_0-32bit-1.0.1g-0.58.59.1.ppc64",
                  "product_id": "libopenssl1_0_0-32bit-1.0.1g-0.58.59.1.ppc64"
                }
              },
              {
                "category": "product_version",
                "name": "openssl1-1.0.1g-0.58.59.1.ppc64",
                "product": {
                  "name": "openssl1-1.0.1g-0.58.59.1.ppc64",
                  "product_id": "openssl1-1.0.1g-0.58.59.1.ppc64"
                }
              },
              {
                "category": "product_version",
                "name": "openssl1-doc-1.0.1g-0.58.59.1.ppc64",
                "product": {
                  "name": "openssl1-doc-1.0.1g-0.58.59.1.ppc64",
                  "product_id": "openssl1-doc-1.0.1g-0.58.59.1.ppc64"
                }
              }
            ],
            "category": "architecture",
            "name": "ppc64"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl1-devel-1.0.1g-0.58.59.1.s390",
                "product": {
                  "name": "libopenssl1-devel-1.0.1g-0.58.59.1.s390",
                  "product_id": "libopenssl1-devel-1.0.1g-0.58.59.1.s390"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-1.0.1g-0.58.59.1.s390",
                "product": {
                  "name": "libopenssl1_0_0-1.0.1g-0.58.59.1.s390",
                  "product_id": "libopenssl1_0_0-1.0.1g-0.58.59.1.s390"
                }
              },
              {
                "category": "product_version",
                "name": "openssl1-1.0.1g-0.58.59.1.s390",
                "product": {
                  "name": "openssl1-1.0.1g-0.58.59.1.s390",
                  "product_id": "openssl1-1.0.1g-0.58.59.1.s390"
                }
              },
              {
                "category": "product_version",
                "name": "openssl1-doc-1.0.1g-0.58.59.1.s390",
                "product": {
                  "name": "openssl1-doc-1.0.1g-0.58.59.1.s390",
                  "product_id": "openssl1-doc-1.0.1g-0.58.59.1.s390"
                }
              }
            ],
            "category": "architecture",
            "name": "s390"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl1-devel-1.0.1g-0.58.59.1.s390x",
                "product": {
                  "name": "libopenssl1-devel-1.0.1g-0.58.59.1.s390x",
                  "product_id": "libopenssl1-devel-1.0.1g-0.58.59.1.s390x"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1-devel-32bit-1.0.1g-0.58.59.1.s390x",
                "product": {
                  "name": "libopenssl1-devel-32bit-1.0.1g-0.58.59.1.s390x",
                  "product_id": "libopenssl1-devel-32bit-1.0.1g-0.58.59.1.s390x"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-1.0.1g-0.58.59.1.s390x",
                "product": {
                  "name": "libopenssl1_0_0-1.0.1g-0.58.59.1.s390x",
                  "product_id": "libopenssl1_0_0-1.0.1g-0.58.59.1.s390x"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-32bit-1.0.1g-0.58.59.1.s390x",
                "product": {
                  "name": "libopenssl1_0_0-32bit-1.0.1g-0.58.59.1.s390x",
                  "product_id": "libopenssl1_0_0-32bit-1.0.1g-0.58.59.1.s390x"
                }
              },
              {
                "category": "product_version",
                "name": "openssl1-1.0.1g-0.58.59.1.s390x",
                "product": {
                  "name": "openssl1-1.0.1g-0.58.59.1.s390x",
                  "product_id": "openssl1-1.0.1g-0.58.59.1.s390x"
                }
              },
              {
                "category": "product_version",
                "name": "openssl1-doc-1.0.1g-0.58.59.1.s390x",
                "product": {
                  "name": "openssl1-doc-1.0.1g-0.58.59.1.s390x",
                  "product_id": "openssl1-doc-1.0.1g-0.58.59.1.s390x"
                }
              }
            ],
            "category": "architecture",
            "name": "s390x"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl1-devel-1.0.1g-0.58.59.1.x86_64",
                "product": {
                  "name": "libopenssl1-devel-1.0.1g-0.58.59.1.x86_64",
                  "product_id": "libopenssl1-devel-1.0.1g-0.58.59.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1-devel-32bit-1.0.1g-0.58.59.1.x86_64",
                "product": {
                  "name": "libopenssl1-devel-32bit-1.0.1g-0.58.59.1.x86_64",
                  "product_id": "libopenssl1-devel-32bit-1.0.1g-0.58.59.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-1.0.1g-0.58.59.1.x86_64",
                "product": {
                  "name": "libopenssl1_0_0-1.0.1g-0.58.59.1.x86_64",
                  "product_id": "libopenssl1_0_0-1.0.1g-0.58.59.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-32bit-1.0.1g-0.58.59.1.x86_64",
                "product": {
                  "name": "libopenssl1_0_0-32bit-1.0.1g-0.58.59.1.x86_64",
                  "product_id": "libopenssl1_0_0-32bit-1.0.1g-0.58.59.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "openssl1-1.0.1g-0.58.59.1.x86_64",
                "product": {
                  "name": "openssl1-1.0.1g-0.58.59.1.x86_64",
                  "product_id": "openssl1-1.0.1g-0.58.59.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "openssl1-doc-1.0.1g-0.58.59.1.x86_64",
                "product": {
                  "name": "openssl1-doc-1.0.1g-0.58.59.1.x86_64",
                  "product_id": "openssl1-doc-1.0.1g-0.58.59.1.x86_64"
                }
              }
            ],
            "category": "architecture",
            "name": "x86_64"
          },
          {
            "branches": [
              {
                "category": "product_name",
                "name": "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE",
                "product": {
                  "name": "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE",
                  "product_id": "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:suse_sles_ltss-extreme-core:11:sp4"
                  }
                }
              }
            ],
            "category": "product_family",
            "name": "SUSE Linux Enterprise"
          }
        ],
        "category": "vendor",
        "name": "SUSE"
      }
    ],
    "relationships": [
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1-devel-1.0.1g-0.58.59.1.x86_64 as component of SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE",
          "product_id": "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE:libopenssl1-devel-1.0.1g-0.58.59.1.x86_64"
        },
        "product_reference": "libopenssl1-devel-1.0.1g-0.58.59.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.1g-0.58.59.1.x86_64 as component of SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE",
          "product_id": "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE:libopenssl1_0_0-1.0.1g-0.58.59.1.x86_64"
        },
        "product_reference": "libopenssl1_0_0-1.0.1g-0.58.59.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-32bit-1.0.1g-0.58.59.1.x86_64 as component of SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE",
          "product_id": "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE:libopenssl1_0_0-32bit-1.0.1g-0.58.59.1.x86_64"
        },
        "product_reference": "libopenssl1_0_0-32bit-1.0.1g-0.58.59.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl1-1.0.1g-0.58.59.1.x86_64 as component of SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE",
          "product_id": "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE:openssl1-1.0.1g-0.58.59.1.x86_64"
        },
        "product_reference": "openssl1-1.0.1g-0.58.59.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl1-doc-1.0.1g-0.58.59.1.x86_64 as component of SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE",
          "product_id": "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE:openssl1-doc-1.0.1g-0.58.59.1.x86_64"
        },
        "product_reference": "openssl1-doc-1.0.1g-0.58.59.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2023-0464",
      "ids": [
        {
          "system_name": "SUSE CVE Page",
          "text": "https://www.suse.com/security/cve/CVE-2023-0464"
        }
      ],
      "notes": [
        {
          "category": "general",
          "text": "A security vulnerability has been identified in all supported versions\n\nof OpenSSL related to the verification of X.509 certificate chains\nthat include policy constraints.  Attackers may be able to exploit this\nvulnerability by creating a malicious certificate chain that triggers\nexponential use of computational resources, leading to a denial-of-service\n(DoS) attack on affected systems.\n\nPolicy processing is disabled by default but can be enabled by passing\nthe `-policy\u0027 argument to the command line utilities or by calling the\n`X509_VERIFY_PARAM_set1_policies()\u0027 function.",
          "title": "CVE description"
        }
      ],
      "product_status": {
        "recommended": [
          "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE:libopenssl1-devel-1.0.1g-0.58.59.1.x86_64",
          "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE:libopenssl1_0_0-1.0.1g-0.58.59.1.x86_64",
          "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE:libopenssl1_0_0-32bit-1.0.1g-0.58.59.1.x86_64",
          "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE:openssl1-1.0.1g-0.58.59.1.x86_64",
          "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE:openssl1-doc-1.0.1g-0.58.59.1.x86_64"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "CVE-2023-0464",
          "url": "https://www.suse.com/security/cve/CVE-2023-0464"
        },
        {
          "category": "external",
          "summary": "SUSE Bug 1209624 for CVE-2023-0464",
          "url": "https://bugzilla.suse.com/1209624"
        },
        {
          "category": "external",
          "summary": "SUSE Bug 1225628 for CVE-2023-0464",
          "url": "https://bugzilla.suse.com/1225628"
        }
      ],
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or \"zypper patch\".\n",
          "product_ids": [
            "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE:libopenssl1-devel-1.0.1g-0.58.59.1.x86_64",
            "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE:libopenssl1_0_0-1.0.1g-0.58.59.1.x86_64",
            "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE:libopenssl1_0_0-32bit-1.0.1g-0.58.59.1.x86_64",
            "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE:openssl1-1.0.1g-0.58.59.1.x86_64",
            "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE:openssl1-doc-1.0.1g-0.58.59.1.x86_64"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE:libopenssl1-devel-1.0.1g-0.58.59.1.x86_64",
            "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE:libopenssl1_0_0-1.0.1g-0.58.59.1.x86_64",
            "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE:libopenssl1_0_0-32bit-1.0.1g-0.58.59.1.x86_64",
            "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE:openssl1-1.0.1g-0.58.59.1.x86_64",
            "SUSE Linux Enterprise Server 11 SP4 LTSS EXTREME CORE:openssl1-doc-1.0.1g-0.58.59.1.x86_64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "date": "2023-04-04T10:03:45Z",
          "details": "moderate"
        }
      ],
      "title": "CVE-2023-0464"
    }
  ]
}

{
  "document": {
    "aggregate_severity": {
      "namespace": "https://www.suse.com/support/security/rating/",
      "text": "moderate"
    },
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Copyright 2024 SUSE LLC. All rights reserved.",
      "tlp": {
        "label": "WHITE",
        "url": "https://www.first.org/tlp/"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "Security update for openssl-1_0_0",
        "title": "Title of the patch"
      },
      {
        "category": "description",
        "text": "This update for openssl-1_0_0 fixes the following issues:\n\nSecurity fixes:\n\n- CVE-2023-0464: Fixed excessive Resource Usage Verifying X.509 Policy Constraints (bsc#1209624).\n\nOther fixes:\n\n- Fix DH key generation in FIPS mode, add support for constant BN for DH parameters (bsc#1202062)\n",
        "title": "Description of the patch"
      },
      {
        "category": "details",
        "text": "SUSE-2023-1704,SUSE-OpenStack-Cloud-9-2023-1704,SUSE-OpenStack-Cloud-Crowbar-9-2023-1704,SUSE-SLE-SAP-12-SP4-2023-1704,SUSE-SLE-SDK-12-SP5-2023-1704,SUSE-SLE-SERVER-12-SP4-ESPOS-2023-1704,SUSE-SLE-SERVER-12-SP4-LTSS-2023-1704,SUSE-SLE-SERVER-12-SP5-2023-1704",
        "title": "Patchnames"
      },
      {
        "category": "legal_disclaimer",
        "text": "CSAF 2.0 data is provided by SUSE under the Creative Commons License 4.0 with Attribution (CC-BY-4.0).",
        "title": "Terms of use"
      }
    ],
    "publisher": {
      "category": "vendor",
      "contact_details": "https://www.suse.com/support/security/contact/",
      "name": "SUSE Product Security Team",
      "namespace": "https://www.suse.com/"
    },
    "references": [
      {
        "category": "external",
        "summary": "SUSE ratings",
        "url": "https://www.suse.com/support/security/rating/"
      },
      {
        "category": "self",
        "summary": "URL of this CSAF notice",
        "url": "https://ftp.suse.com/pub/projects/security/csaf/suse-su-2023_1704-1.json"
      },
      {
        "category": "self",
        "summary": "URL for SUSE-SU-2023:1704-1",
        "url": "https://www.suse.com/support/update/announcement/2023/suse-su-20231704-1/"
      },
      {
        "category": "self",
        "summary": "E-Mail link for SUSE-SU-2023:1704-1",
        "url": "https://lists.suse.com/pipermail/sle-security-updates/2023-March/014270.html"
      },
      {
        "category": "self",
        "summary": "SUSE Bug 1202062",
        "url": "https://bugzilla.suse.com/1202062"
      },
      {
        "category": "self",
        "summary": "SUSE Bug 1209624",
        "url": "https://bugzilla.suse.com/1209624"
      },
      {
        "category": "self",
        "summary": "SUSE CVE CVE-2023-0464 page",
        "url": "https://www.suse.com/security/cve/CVE-2023-0464/"
      }
    ],
    "title": "Security update for openssl-1_0_0",
    "tracking": {
      "current_release_date": "2023-03-30T14:16:24Z",
      "generator": {
        "date": "2023-03-30T14:16:24Z",
        "engine": {
          "name": "cve-database.git:bin/generate-csaf.pl",
          "version": "1"
        }
      },
      "id": "SUSE-SU-2023:1704-1",
      "initial_release_date": "2023-03-30T14:16:24Z",
      "revision_history": [
        {
          "date": "2023-03-30T14:16:24Z",
          "number": "1",
          "summary": "Current version"
        }
      ],
      "status": "final",
      "version": "1"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.aarch64",
                "product": {
                  "name": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.aarch64",
                  "product_id": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.aarch64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-1.0.2p-3.69.1.aarch64",
                "product": {
                  "name": "libopenssl1_0_0-1.0.2p-3.69.1.aarch64",
                  "product_id": "libopenssl1_0_0-1.0.2p-3.69.1.aarch64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.aarch64",
                "product": {
                  "name": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.aarch64",
                  "product_id": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.aarch64"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-1_0_0-1.0.2p-3.69.1.aarch64",
                "product": {
                  "name": "openssl-1_0_0-1.0.2p-3.69.1.aarch64",
                  "product_id": "openssl-1_0_0-1.0.2p-3.69.1.aarch64"
                }
              }
            ],
            "category": "architecture",
            "name": "aarch64"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-1_0_0-devel-64bit-1.0.2p-3.69.1.aarch64_ilp32",
                "product": {
                  "name": "libopenssl-1_0_0-devel-64bit-1.0.2p-3.69.1.aarch64_ilp32",
                  "product_id": "libopenssl-1_0_0-devel-64bit-1.0.2p-3.69.1.aarch64_ilp32"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-64bit-1.0.2p-3.69.1.aarch64_ilp32",
                "product": {
                  "name": "libopenssl1_0_0-64bit-1.0.2p-3.69.1.aarch64_ilp32",
                  "product_id": "libopenssl1_0_0-64bit-1.0.2p-3.69.1.aarch64_ilp32"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-hmac-64bit-1.0.2p-3.69.1.aarch64_ilp32",
                "product": {
                  "name": "libopenssl1_0_0-hmac-64bit-1.0.2p-3.69.1.aarch64_ilp32",
                  "product_id": "libopenssl1_0_0-hmac-64bit-1.0.2p-3.69.1.aarch64_ilp32"
                }
              }
            ],
            "category": "architecture",
            "name": "aarch64_ilp32"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.i586",
                "product": {
                  "name": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.i586",
                  "product_id": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.i586"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-1.0.2p-3.69.1.i586",
                "product": {
                  "name": "libopenssl1_0_0-1.0.2p-3.69.1.i586",
                  "product_id": "libopenssl1_0_0-1.0.2p-3.69.1.i586"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.i586",
                "product": {
                  "name": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.i586",
                  "product_id": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.i586"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-1_0_0-1.0.2p-3.69.1.i586",
                "product": {
                  "name": "openssl-1_0_0-1.0.2p-3.69.1.i586",
                  "product_id": "openssl-1_0_0-1.0.2p-3.69.1.i586"
                }
              }
            ],
            "category": "architecture",
            "name": "i586"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "openssl-1_0_0-doc-1.0.2p-3.69.1.noarch",
                "product": {
                  "name": "openssl-1_0_0-doc-1.0.2p-3.69.1.noarch",
                  "product_id": "openssl-1_0_0-doc-1.0.2p-3.69.1.noarch"
                }
              }
            ],
            "category": "architecture",
            "name": "noarch"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.ppc64le",
                "product": {
                  "name": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.ppc64le",
                  "product_id": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.ppc64le"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-1.0.2p-3.69.1.ppc64le",
                "product": {
                  "name": "libopenssl1_0_0-1.0.2p-3.69.1.ppc64le",
                  "product_id": "libopenssl1_0_0-1.0.2p-3.69.1.ppc64le"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.ppc64le",
                "product": {
                  "name": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.ppc64le",
                  "product_id": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.ppc64le"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-1_0_0-1.0.2p-3.69.1.ppc64le",
                "product": {
                  "name": "openssl-1_0_0-1.0.2p-3.69.1.ppc64le",
                  "product_id": "openssl-1_0_0-1.0.2p-3.69.1.ppc64le"
                }
              }
            ],
            "category": "architecture",
            "name": "ppc64le"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.s390",
                "product": {
                  "name": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.s390",
                  "product_id": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.s390"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-1.0.2p-3.69.1.s390",
                "product": {
                  "name": "libopenssl1_0_0-1.0.2p-3.69.1.s390",
                  "product_id": "libopenssl1_0_0-1.0.2p-3.69.1.s390"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.s390",
                "product": {
                  "name": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.s390",
                  "product_id": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.s390"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-1_0_0-1.0.2p-3.69.1.s390",
                "product": {
                  "name": "openssl-1_0_0-1.0.2p-3.69.1.s390",
                  "product_id": "openssl-1_0_0-1.0.2p-3.69.1.s390"
                }
              }
            ],
            "category": "architecture",
            "name": "s390"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.s390x",
                "product": {
                  "name": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.s390x",
                  "product_id": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.s390x"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl-1_0_0-devel-32bit-1.0.2p-3.69.1.s390x",
                "product": {
                  "name": "libopenssl-1_0_0-devel-32bit-1.0.2p-3.69.1.s390x",
                  "product_id": "libopenssl-1_0_0-devel-32bit-1.0.2p-3.69.1.s390x"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-1.0.2p-3.69.1.s390x",
                "product": {
                  "name": "libopenssl1_0_0-1.0.2p-3.69.1.s390x",
                  "product_id": "libopenssl1_0_0-1.0.2p-3.69.1.s390x"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-32bit-1.0.2p-3.69.1.s390x",
                "product": {
                  "name": "libopenssl1_0_0-32bit-1.0.2p-3.69.1.s390x",
                  "product_id": "libopenssl1_0_0-32bit-1.0.2p-3.69.1.s390x"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.s390x",
                "product": {
                  "name": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.s390x",
                  "product_id": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.s390x"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.s390x",
                "product": {
                  "name": "libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.s390x",
                  "product_id": "libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.s390x"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-1_0_0-1.0.2p-3.69.1.s390x",
                "product": {
                  "name": "openssl-1_0_0-1.0.2p-3.69.1.s390x",
                  "product_id": "openssl-1_0_0-1.0.2p-3.69.1.s390x"
                }
              }
            ],
            "category": "architecture",
            "name": "s390x"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.x86_64",
                "product": {
                  "name": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.x86_64",
                  "product_id": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl-1_0_0-devel-32bit-1.0.2p-3.69.1.x86_64",
                "product": {
                  "name": "libopenssl-1_0_0-devel-32bit-1.0.2p-3.69.1.x86_64",
                  "product_id": "libopenssl-1_0_0-devel-32bit-1.0.2p-3.69.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-1.0.2p-3.69.1.x86_64",
                "product": {
                  "name": "libopenssl1_0_0-1.0.2p-3.69.1.x86_64",
                  "product_id": "libopenssl1_0_0-1.0.2p-3.69.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-32bit-1.0.2p-3.69.1.x86_64",
                "product": {
                  "name": "libopenssl1_0_0-32bit-1.0.2p-3.69.1.x86_64",
                  "product_id": "libopenssl1_0_0-32bit-1.0.2p-3.69.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.x86_64",
                "product": {
                  "name": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.x86_64",
                  "product_id": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.x86_64",
                "product": {
                  "name": "libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.x86_64",
                  "product_id": "libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-1_0_0-1.0.2p-3.69.1.x86_64",
                "product": {
                  "name": "openssl-1_0_0-1.0.2p-3.69.1.x86_64",
                  "product_id": "openssl-1_0_0-1.0.2p-3.69.1.x86_64"
                }
              }
            ],
            "category": "architecture",
            "name": "x86_64"
          },
          {
            "branches": [
              {
                "category": "product_name",
                "name": "SUSE OpenStack Cloud 9",
                "product": {
                  "name": "SUSE OpenStack Cloud 9",
                  "product_id": "SUSE OpenStack Cloud 9",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:suse-openstack-cloud:9"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "SUSE OpenStack Cloud Crowbar 9",
                "product": {
                  "name": "SUSE OpenStack Cloud Crowbar 9",
                  "product_id": "SUSE OpenStack Cloud Crowbar 9",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:suse-openstack-cloud-crowbar:9"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "SUSE Linux Enterprise Server for SAP Applications 12 SP4",
                "product": {
                  "name": "SUSE Linux Enterprise Server for SAP Applications 12 SP4",
                  "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP4",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:sles_sap:12:sp4"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "SUSE Linux Enterprise Software Development Kit 12 SP5",
                "product": {
                  "name": "SUSE Linux Enterprise Software Development Kit 12 SP5",
                  "product_id": "SUSE Linux Enterprise Software Development Kit 12 SP5",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:sle-sdk:12:sp5"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "SUSE Linux Enterprise Server 12 SP4-ESPOS",
                "product": {
                  "name": "SUSE Linux Enterprise Server 12 SP4-ESPOS",
                  "product_id": "SUSE Linux Enterprise Server 12 SP4-ESPOS",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:sles-espos:12:sp4"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "SUSE Linux Enterprise Server 12 SP4-LTSS",
                "product": {
                  "name": "SUSE Linux Enterprise Server 12 SP4-LTSS",
                  "product_id": "SUSE Linux Enterprise Server 12 SP4-LTSS",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:sles-ltss:12:sp4"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "SUSE Linux Enterprise Server 12 SP5",
                "product": {
                  "name": "SUSE Linux Enterprise Server 12 SP5",
                  "product_id": "SUSE Linux Enterprise Server 12 SP5",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:sles:12:sp5"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "SUSE Linux Enterprise Server for SAP Applications 12 SP5",
                "product": {
                  "name": "SUSE Linux Enterprise Server for SAP Applications 12 SP5",
                  "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP5",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:sles_sap:12:sp5"
                  }
                }
              }
            ],
            "category": "product_family",
            "name": "SUSE Linux Enterprise"
          }
        ],
        "category": "vendor",
        "name": "SUSE"
      }
    ],
    "relationships": [
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.x86_64 as component of SUSE OpenStack Cloud 9",
          "product_id": "SUSE OpenStack Cloud 9:libopenssl-1_0_0-devel-1.0.2p-3.69.1.x86_64"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.x86_64",
        "relates_to_product_reference": "SUSE OpenStack Cloud 9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2p-3.69.1.x86_64 as component of SUSE OpenStack Cloud 9",
          "product_id": "SUSE OpenStack Cloud 9:libopenssl1_0_0-1.0.2p-3.69.1.x86_64"
        },
        "product_reference": "libopenssl1_0_0-1.0.2p-3.69.1.x86_64",
        "relates_to_product_reference": "SUSE OpenStack Cloud 9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-32bit-1.0.2p-3.69.1.x86_64 as component of SUSE OpenStack Cloud 9",
          "product_id": "SUSE OpenStack Cloud 9:libopenssl1_0_0-32bit-1.0.2p-3.69.1.x86_64"
        },
        "product_reference": "libopenssl1_0_0-32bit-1.0.2p-3.69.1.x86_64",
        "relates_to_product_reference": "SUSE OpenStack Cloud 9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.x86_64 as component of SUSE OpenStack Cloud 9",
          "product_id": "SUSE OpenStack Cloud 9:libopenssl1_0_0-hmac-1.0.2p-3.69.1.x86_64"
        },
        "product_reference": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.x86_64",
        "relates_to_product_reference": "SUSE OpenStack Cloud 9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.x86_64 as component of SUSE OpenStack Cloud 9",
          "product_id": "SUSE OpenStack Cloud 9:libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.x86_64"
        },
        "product_reference": "libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.x86_64",
        "relates_to_product_reference": "SUSE OpenStack Cloud 9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-1.0.2p-3.69.1.x86_64 as component of SUSE OpenStack Cloud 9",
          "product_id": "SUSE OpenStack Cloud 9:openssl-1_0_0-1.0.2p-3.69.1.x86_64"
        },
        "product_reference": "openssl-1_0_0-1.0.2p-3.69.1.x86_64",
        "relates_to_product_reference": "SUSE OpenStack Cloud 9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-doc-1.0.2p-3.69.1.noarch as component of SUSE OpenStack Cloud 9",
          "product_id": "SUSE OpenStack Cloud 9:openssl-1_0_0-doc-1.0.2p-3.69.1.noarch"
        },
        "product_reference": "openssl-1_0_0-doc-1.0.2p-3.69.1.noarch",
        "relates_to_product_reference": "SUSE OpenStack Cloud 9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.x86_64 as component of SUSE OpenStack Cloud Crowbar 9",
          "product_id": "SUSE OpenStack Cloud Crowbar 9:libopenssl-1_0_0-devel-1.0.2p-3.69.1.x86_64"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.x86_64",
        "relates_to_product_reference": "SUSE OpenStack Cloud Crowbar 9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2p-3.69.1.x86_64 as component of SUSE OpenStack Cloud Crowbar 9",
          "product_id": "SUSE OpenStack Cloud Crowbar 9:libopenssl1_0_0-1.0.2p-3.69.1.x86_64"
        },
        "product_reference": "libopenssl1_0_0-1.0.2p-3.69.1.x86_64",
        "relates_to_product_reference": "SUSE OpenStack Cloud Crowbar 9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-32bit-1.0.2p-3.69.1.x86_64 as component of SUSE OpenStack Cloud Crowbar 9",
          "product_id": "SUSE OpenStack Cloud Crowbar 9:libopenssl1_0_0-32bit-1.0.2p-3.69.1.x86_64"
        },
        "product_reference": "libopenssl1_0_0-32bit-1.0.2p-3.69.1.x86_64",
        "relates_to_product_reference": "SUSE OpenStack Cloud Crowbar 9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.x86_64 as component of SUSE OpenStack Cloud Crowbar 9",
          "product_id": "SUSE OpenStack Cloud Crowbar 9:libopenssl1_0_0-hmac-1.0.2p-3.69.1.x86_64"
        },
        "product_reference": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.x86_64",
        "relates_to_product_reference": "SUSE OpenStack Cloud Crowbar 9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.x86_64 as component of SUSE OpenStack Cloud Crowbar 9",
          "product_id": "SUSE OpenStack Cloud Crowbar 9:libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.x86_64"
        },
        "product_reference": "libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.x86_64",
        "relates_to_product_reference": "SUSE OpenStack Cloud Crowbar 9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-1.0.2p-3.69.1.x86_64 as component of SUSE OpenStack Cloud Crowbar 9",
          "product_id": "SUSE OpenStack Cloud Crowbar 9:openssl-1_0_0-1.0.2p-3.69.1.x86_64"
        },
        "product_reference": "openssl-1_0_0-1.0.2p-3.69.1.x86_64",
        "relates_to_product_reference": "SUSE OpenStack Cloud Crowbar 9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-doc-1.0.2p-3.69.1.noarch as component of SUSE OpenStack Cloud Crowbar 9",
          "product_id": "SUSE OpenStack Cloud Crowbar 9:openssl-1_0_0-doc-1.0.2p-3.69.1.noarch"
        },
        "product_reference": "openssl-1_0_0-doc-1.0.2p-3.69.1.noarch",
        "relates_to_product_reference": "SUSE OpenStack Cloud Crowbar 9"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.ppc64le as component of SUSE Linux Enterprise Server for SAP Applications 12 SP4",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl-1_0_0-devel-1.0.2p-3.69.1.ppc64le"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 12 SP4",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl-1_0_0-devel-1.0.2p-3.69.1.x86_64"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2p-3.69.1.ppc64le as component of SUSE Linux Enterprise Server for SAP Applications 12 SP4",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl1_0_0-1.0.2p-3.69.1.ppc64le"
        },
        "product_reference": "libopenssl1_0_0-1.0.2p-3.69.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2p-3.69.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 12 SP4",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl1_0_0-1.0.2p-3.69.1.x86_64"
        },
        "product_reference": "libopenssl1_0_0-1.0.2p-3.69.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-32bit-1.0.2p-3.69.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 12 SP4",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl1_0_0-32bit-1.0.2p-3.69.1.x86_64"
        },
        "product_reference": "libopenssl1_0_0-32bit-1.0.2p-3.69.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.ppc64le as component of SUSE Linux Enterprise Server for SAP Applications 12 SP4",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl1_0_0-hmac-1.0.2p-3.69.1.ppc64le"
        },
        "product_reference": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 12 SP4",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl1_0_0-hmac-1.0.2p-3.69.1.x86_64"
        },
        "product_reference": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 12 SP4",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.x86_64"
        },
        "product_reference": "libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-1.0.2p-3.69.1.ppc64le as component of SUSE Linux Enterprise Server for SAP Applications 12 SP4",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP4:openssl-1_0_0-1.0.2p-3.69.1.ppc64le"
        },
        "product_reference": "openssl-1_0_0-1.0.2p-3.69.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-1.0.2p-3.69.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 12 SP4",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP4:openssl-1_0_0-1.0.2p-3.69.1.x86_64"
        },
        "product_reference": "openssl-1_0_0-1.0.2p-3.69.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-doc-1.0.2p-3.69.1.noarch as component of SUSE Linux Enterprise Server for SAP Applications 12 SP4",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP4:openssl-1_0_0-doc-1.0.2p-3.69.1.noarch"
        },
        "product_reference": "openssl-1_0_0-doc-1.0.2p-3.69.1.noarch",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.aarch64 as component of SUSE Linux Enterprise Software Development Kit 12 SP5",
          "product_id": "SUSE Linux Enterprise Software Development Kit 12 SP5:libopenssl-1_0_0-devel-1.0.2p-3.69.1.aarch64"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Software Development Kit 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.ppc64le as component of SUSE Linux Enterprise Software Development Kit 12 SP5",
          "product_id": "SUSE Linux Enterprise Software Development Kit 12 SP5:libopenssl-1_0_0-devel-1.0.2p-3.69.1.ppc64le"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Software Development Kit 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.s390x as component of SUSE Linux Enterprise Software Development Kit 12 SP5",
          "product_id": "SUSE Linux Enterprise Software Development Kit 12 SP5:libopenssl-1_0_0-devel-1.0.2p-3.69.1.s390x"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Software Development Kit 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.x86_64 as component of SUSE Linux Enterprise Software Development Kit 12 SP5",
          "product_id": "SUSE Linux Enterprise Software Development Kit 12 SP5:libopenssl-1_0_0-devel-1.0.2p-3.69.1.x86_64"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Software Development Kit 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-32bit-1.0.2p-3.69.1.s390x as component of SUSE Linux Enterprise Software Development Kit 12 SP5",
          "product_id": "SUSE Linux Enterprise Software Development Kit 12 SP5:libopenssl-1_0_0-devel-32bit-1.0.2p-3.69.1.s390x"
        },
        "product_reference": "libopenssl-1_0_0-devel-32bit-1.0.2p-3.69.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Software Development Kit 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-32bit-1.0.2p-3.69.1.x86_64 as component of SUSE Linux Enterprise Software Development Kit 12 SP5",
          "product_id": "SUSE Linux Enterprise Software Development Kit 12 SP5:libopenssl-1_0_0-devel-32bit-1.0.2p-3.69.1.x86_64"
        },
        "product_reference": "libopenssl-1_0_0-devel-32bit-1.0.2p-3.69.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Software Development Kit 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.aarch64 as component of SUSE Linux Enterprise Server 12 SP4-ESPOS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl-1_0_0-devel-1.0.2p-3.69.1.aarch64"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-ESPOS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.x86_64 as component of SUSE Linux Enterprise Server 12 SP4-ESPOS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl-1_0_0-devel-1.0.2p-3.69.1.x86_64"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-ESPOS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2p-3.69.1.aarch64 as component of SUSE Linux Enterprise Server 12 SP4-ESPOS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl1_0_0-1.0.2p-3.69.1.aarch64"
        },
        "product_reference": "libopenssl1_0_0-1.0.2p-3.69.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-ESPOS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2p-3.69.1.x86_64 as component of SUSE Linux Enterprise Server 12 SP4-ESPOS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl1_0_0-1.0.2p-3.69.1.x86_64"
        },
        "product_reference": "libopenssl1_0_0-1.0.2p-3.69.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-ESPOS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-32bit-1.0.2p-3.69.1.x86_64 as component of SUSE Linux Enterprise Server 12 SP4-ESPOS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl1_0_0-32bit-1.0.2p-3.69.1.x86_64"
        },
        "product_reference": "libopenssl1_0_0-32bit-1.0.2p-3.69.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-ESPOS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.aarch64 as component of SUSE Linux Enterprise Server 12 SP4-ESPOS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl1_0_0-hmac-1.0.2p-3.69.1.aarch64"
        },
        "product_reference": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-ESPOS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.x86_64 as component of SUSE Linux Enterprise Server 12 SP4-ESPOS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl1_0_0-hmac-1.0.2p-3.69.1.x86_64"
        },
        "product_reference": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-ESPOS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.x86_64 as component of SUSE Linux Enterprise Server 12 SP4-ESPOS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.x86_64"
        },
        "product_reference": "libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-ESPOS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-1.0.2p-3.69.1.aarch64 as component of SUSE Linux Enterprise Server 12 SP4-ESPOS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-ESPOS:openssl-1_0_0-1.0.2p-3.69.1.aarch64"
        },
        "product_reference": "openssl-1_0_0-1.0.2p-3.69.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-ESPOS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-1.0.2p-3.69.1.x86_64 as component of SUSE Linux Enterprise Server 12 SP4-ESPOS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-ESPOS:openssl-1_0_0-1.0.2p-3.69.1.x86_64"
        },
        "product_reference": "openssl-1_0_0-1.0.2p-3.69.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-ESPOS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-doc-1.0.2p-3.69.1.noarch as component of SUSE Linux Enterprise Server 12 SP4-ESPOS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-ESPOS:openssl-1_0_0-doc-1.0.2p-3.69.1.noarch"
        },
        "product_reference": "openssl-1_0_0-doc-1.0.2p-3.69.1.noarch",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-ESPOS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.aarch64 as component of SUSE Linux Enterprise Server 12 SP4-LTSS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl-1_0_0-devel-1.0.2p-3.69.1.aarch64"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.ppc64le as component of SUSE Linux Enterprise Server 12 SP4-LTSS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl-1_0_0-devel-1.0.2p-3.69.1.ppc64le"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.s390x as component of SUSE Linux Enterprise Server 12 SP4-LTSS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl-1_0_0-devel-1.0.2p-3.69.1.s390x"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.x86_64 as component of SUSE Linux Enterprise Server 12 SP4-LTSS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl-1_0_0-devel-1.0.2p-3.69.1.x86_64"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2p-3.69.1.aarch64 as component of SUSE Linux Enterprise Server 12 SP4-LTSS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_0_0-1.0.2p-3.69.1.aarch64"
        },
        "product_reference": "libopenssl1_0_0-1.0.2p-3.69.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2p-3.69.1.ppc64le as component of SUSE Linux Enterprise Server 12 SP4-LTSS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_0_0-1.0.2p-3.69.1.ppc64le"
        },
        "product_reference": "libopenssl1_0_0-1.0.2p-3.69.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2p-3.69.1.s390x as component of SUSE Linux Enterprise Server 12 SP4-LTSS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_0_0-1.0.2p-3.69.1.s390x"
        },
        "product_reference": "libopenssl1_0_0-1.0.2p-3.69.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2p-3.69.1.x86_64 as component of SUSE Linux Enterprise Server 12 SP4-LTSS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_0_0-1.0.2p-3.69.1.x86_64"
        },
        "product_reference": "libopenssl1_0_0-1.0.2p-3.69.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-32bit-1.0.2p-3.69.1.s390x as component of SUSE Linux Enterprise Server 12 SP4-LTSS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_0_0-32bit-1.0.2p-3.69.1.s390x"
        },
        "product_reference": "libopenssl1_0_0-32bit-1.0.2p-3.69.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-32bit-1.0.2p-3.69.1.x86_64 as component of SUSE Linux Enterprise Server 12 SP4-LTSS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_0_0-32bit-1.0.2p-3.69.1.x86_64"
        },
        "product_reference": "libopenssl1_0_0-32bit-1.0.2p-3.69.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.aarch64 as component of SUSE Linux Enterprise Server 12 SP4-LTSS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_0_0-hmac-1.0.2p-3.69.1.aarch64"
        },
        "product_reference": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.ppc64le as component of SUSE Linux Enterprise Server 12 SP4-LTSS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_0_0-hmac-1.0.2p-3.69.1.ppc64le"
        },
        "product_reference": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.s390x as component of SUSE Linux Enterprise Server 12 SP4-LTSS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_0_0-hmac-1.0.2p-3.69.1.s390x"
        },
        "product_reference": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.x86_64 as component of SUSE Linux Enterprise Server 12 SP4-LTSS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_0_0-hmac-1.0.2p-3.69.1.x86_64"
        },
        "product_reference": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.s390x as component of SUSE Linux Enterprise Server 12 SP4-LTSS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.s390x"
        },
        "product_reference": "libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.x86_64 as component of SUSE Linux Enterprise Server 12 SP4-LTSS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.x86_64"
        },
        "product_reference": "libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-1.0.2p-3.69.1.aarch64 as component of SUSE Linux Enterprise Server 12 SP4-LTSS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-LTSS:openssl-1_0_0-1.0.2p-3.69.1.aarch64"
        },
        "product_reference": "openssl-1_0_0-1.0.2p-3.69.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-1.0.2p-3.69.1.ppc64le as component of SUSE Linux Enterprise Server 12 SP4-LTSS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-LTSS:openssl-1_0_0-1.0.2p-3.69.1.ppc64le"
        },
        "product_reference": "openssl-1_0_0-1.0.2p-3.69.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-1.0.2p-3.69.1.s390x as component of SUSE Linux Enterprise Server 12 SP4-LTSS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-LTSS:openssl-1_0_0-1.0.2p-3.69.1.s390x"
        },
        "product_reference": "openssl-1_0_0-1.0.2p-3.69.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-1.0.2p-3.69.1.x86_64 as component of SUSE Linux Enterprise Server 12 SP4-LTSS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-LTSS:openssl-1_0_0-1.0.2p-3.69.1.x86_64"
        },
        "product_reference": "openssl-1_0_0-1.0.2p-3.69.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-doc-1.0.2p-3.69.1.noarch as component of SUSE Linux Enterprise Server 12 SP4-LTSS",
          "product_id": "SUSE Linux Enterprise Server 12 SP4-LTSS:openssl-1_0_0-doc-1.0.2p-3.69.1.noarch"
        },
        "product_reference": "openssl-1_0_0-doc-1.0.2p-3.69.1.noarch",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP4-LTSS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.aarch64 as component of SUSE Linux Enterprise Server 12 SP5",
          "product_id": "SUSE Linux Enterprise Server 12 SP5:libopenssl-1_0_0-devel-1.0.2p-3.69.1.aarch64"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.ppc64le as component of SUSE Linux Enterprise Server 12 SP5",
          "product_id": "SUSE Linux Enterprise Server 12 SP5:libopenssl-1_0_0-devel-1.0.2p-3.69.1.ppc64le"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.s390x as component of SUSE Linux Enterprise Server 12 SP5",
          "product_id": "SUSE Linux Enterprise Server 12 SP5:libopenssl-1_0_0-devel-1.0.2p-3.69.1.s390x"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.x86_64 as component of SUSE Linux Enterprise Server 12 SP5",
          "product_id": "SUSE Linux Enterprise Server 12 SP5:libopenssl-1_0_0-devel-1.0.2p-3.69.1.x86_64"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2p-3.69.1.aarch64 as component of SUSE Linux Enterprise Server 12 SP5",
          "product_id": "SUSE Linux Enterprise Server 12 SP5:libopenssl1_0_0-1.0.2p-3.69.1.aarch64"
        },
        "product_reference": "libopenssl1_0_0-1.0.2p-3.69.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2p-3.69.1.ppc64le as component of SUSE Linux Enterprise Server 12 SP5",
          "product_id": "SUSE Linux Enterprise Server 12 SP5:libopenssl1_0_0-1.0.2p-3.69.1.ppc64le"
        },
        "product_reference": "libopenssl1_0_0-1.0.2p-3.69.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2p-3.69.1.s390x as component of SUSE Linux Enterprise Server 12 SP5",
          "product_id": "SUSE Linux Enterprise Server 12 SP5:libopenssl1_0_0-1.0.2p-3.69.1.s390x"
        },
        "product_reference": "libopenssl1_0_0-1.0.2p-3.69.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2p-3.69.1.x86_64 as component of SUSE Linux Enterprise Server 12 SP5",
          "product_id": "SUSE Linux Enterprise Server 12 SP5:libopenssl1_0_0-1.0.2p-3.69.1.x86_64"
        },
        "product_reference": "libopenssl1_0_0-1.0.2p-3.69.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-32bit-1.0.2p-3.69.1.s390x as component of SUSE Linux Enterprise Server 12 SP5",
          "product_id": "SUSE Linux Enterprise Server 12 SP5:libopenssl1_0_0-32bit-1.0.2p-3.69.1.s390x"
        },
        "product_reference": "libopenssl1_0_0-32bit-1.0.2p-3.69.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-32bit-1.0.2p-3.69.1.x86_64 as component of SUSE Linux Enterprise Server 12 SP5",
          "product_id": "SUSE Linux Enterprise Server 12 SP5:libopenssl1_0_0-32bit-1.0.2p-3.69.1.x86_64"
        },
        "product_reference": "libopenssl1_0_0-32bit-1.0.2p-3.69.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.aarch64 as component of SUSE Linux Enterprise Server 12 SP5",
          "product_id": "SUSE Linux Enterprise Server 12 SP5:libopenssl1_0_0-hmac-1.0.2p-3.69.1.aarch64"
        },
        "product_reference": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.ppc64le as component of SUSE Linux Enterprise Server 12 SP5",
          "product_id": "SUSE Linux Enterprise Server 12 SP5:libopenssl1_0_0-hmac-1.0.2p-3.69.1.ppc64le"
        },
        "product_reference": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.s390x as component of SUSE Linux Enterprise Server 12 SP5",
          "product_id": "SUSE Linux Enterprise Server 12 SP5:libopenssl1_0_0-hmac-1.0.2p-3.69.1.s390x"
        },
        "product_reference": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.x86_64 as component of SUSE Linux Enterprise Server 12 SP5",
          "product_id": "SUSE Linux Enterprise Server 12 SP5:libopenssl1_0_0-hmac-1.0.2p-3.69.1.x86_64"
        },
        "product_reference": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.s390x as component of SUSE Linux Enterprise Server 12 SP5",
          "product_id": "SUSE Linux Enterprise Server 12 SP5:libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.s390x"
        },
        "product_reference": "libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.x86_64 as component of SUSE Linux Enterprise Server 12 SP5",
          "product_id": "SUSE Linux Enterprise Server 12 SP5:libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.x86_64"
        },
        "product_reference": "libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-1.0.2p-3.69.1.aarch64 as component of SUSE Linux Enterprise Server 12 SP5",
          "product_id": "SUSE Linux Enterprise Server 12 SP5:openssl-1_0_0-1.0.2p-3.69.1.aarch64"
        },
        "product_reference": "openssl-1_0_0-1.0.2p-3.69.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-1.0.2p-3.69.1.ppc64le as component of SUSE Linux Enterprise Server 12 SP5",
          "product_id": "SUSE Linux Enterprise Server 12 SP5:openssl-1_0_0-1.0.2p-3.69.1.ppc64le"
        },
        "product_reference": "openssl-1_0_0-1.0.2p-3.69.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-1.0.2p-3.69.1.s390x as component of SUSE Linux Enterprise Server 12 SP5",
          "product_id": "SUSE Linux Enterprise Server 12 SP5:openssl-1_0_0-1.0.2p-3.69.1.s390x"
        },
        "product_reference": "openssl-1_0_0-1.0.2p-3.69.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-1.0.2p-3.69.1.x86_64 as component of SUSE Linux Enterprise Server 12 SP5",
          "product_id": "SUSE Linux Enterprise Server 12 SP5:openssl-1_0_0-1.0.2p-3.69.1.x86_64"
        },
        "product_reference": "openssl-1_0_0-1.0.2p-3.69.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-doc-1.0.2p-3.69.1.noarch as component of SUSE Linux Enterprise Server 12 SP5",
          "product_id": "SUSE Linux Enterprise Server 12 SP5:openssl-1_0_0-doc-1.0.2p-3.69.1.noarch"
        },
        "product_reference": "openssl-1_0_0-doc-1.0.2p-3.69.1.noarch",
        "relates_to_product_reference": "SUSE Linux Enterprise Server 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.aarch64 as component of SUSE Linux Enterprise Server for SAP Applications 12 SP5",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl-1_0_0-devel-1.0.2p-3.69.1.aarch64"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.ppc64le as component of SUSE Linux Enterprise Server for SAP Applications 12 SP5",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl-1_0_0-devel-1.0.2p-3.69.1.ppc64le"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.s390x as component of SUSE Linux Enterprise Server for SAP Applications 12 SP5",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl-1_0_0-devel-1.0.2p-3.69.1.s390x"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 12 SP5",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl-1_0_0-devel-1.0.2p-3.69.1.x86_64"
        },
        "product_reference": "libopenssl-1_0_0-devel-1.0.2p-3.69.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2p-3.69.1.aarch64 as component of SUSE Linux Enterprise Server for SAP Applications 12 SP5",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_0_0-1.0.2p-3.69.1.aarch64"
        },
        "product_reference": "libopenssl1_0_0-1.0.2p-3.69.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2p-3.69.1.ppc64le as component of SUSE Linux Enterprise Server for SAP Applications 12 SP5",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_0_0-1.0.2p-3.69.1.ppc64le"
        },
        "product_reference": "libopenssl1_0_0-1.0.2p-3.69.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2p-3.69.1.s390x as component of SUSE Linux Enterprise Server for SAP Applications 12 SP5",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_0_0-1.0.2p-3.69.1.s390x"
        },
        "product_reference": "libopenssl1_0_0-1.0.2p-3.69.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-1.0.2p-3.69.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 12 SP5",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_0_0-1.0.2p-3.69.1.x86_64"
        },
        "product_reference": "libopenssl1_0_0-1.0.2p-3.69.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-32bit-1.0.2p-3.69.1.s390x as component of SUSE Linux Enterprise Server for SAP Applications 12 SP5",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_0_0-32bit-1.0.2p-3.69.1.s390x"
        },
        "product_reference": "libopenssl1_0_0-32bit-1.0.2p-3.69.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-32bit-1.0.2p-3.69.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 12 SP5",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_0_0-32bit-1.0.2p-3.69.1.x86_64"
        },
        "product_reference": "libopenssl1_0_0-32bit-1.0.2p-3.69.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.aarch64 as component of SUSE Linux Enterprise Server for SAP Applications 12 SP5",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_0_0-hmac-1.0.2p-3.69.1.aarch64"
        },
        "product_reference": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.ppc64le as component of SUSE Linux Enterprise Server for SAP Applications 12 SP5",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_0_0-hmac-1.0.2p-3.69.1.ppc64le"
        },
        "product_reference": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.s390x as component of SUSE Linux Enterprise Server for SAP Applications 12 SP5",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_0_0-hmac-1.0.2p-3.69.1.s390x"
        },
        "product_reference": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 12 SP5",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_0_0-hmac-1.0.2p-3.69.1.x86_64"
        },
        "product_reference": "libopenssl1_0_0-hmac-1.0.2p-3.69.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.s390x as component of SUSE Linux Enterprise Server for SAP Applications 12 SP5",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.s390x"
        },
        "product_reference": "libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 12 SP5",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.x86_64"
        },
        "product_reference": "libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-1.0.2p-3.69.1.aarch64 as component of SUSE Linux Enterprise Server for SAP Applications 12 SP5",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP5:openssl-1_0_0-1.0.2p-3.69.1.aarch64"
        },
        "product_reference": "openssl-1_0_0-1.0.2p-3.69.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-1.0.2p-3.69.1.ppc64le as component of SUSE Linux Enterprise Server for SAP Applications 12 SP5",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP5:openssl-1_0_0-1.0.2p-3.69.1.ppc64le"
        },
        "product_reference": "openssl-1_0_0-1.0.2p-3.69.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-1.0.2p-3.69.1.s390x as component of SUSE Linux Enterprise Server for SAP Applications 12 SP5",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP5:openssl-1_0_0-1.0.2p-3.69.1.s390x"
        },
        "product_reference": "openssl-1_0_0-1.0.2p-3.69.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-1.0.2p-3.69.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 12 SP5",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP5:openssl-1_0_0-1.0.2p-3.69.1.x86_64"
        },
        "product_reference": "openssl-1_0_0-1.0.2p-3.69.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP5"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_0_0-doc-1.0.2p-3.69.1.noarch as component of SUSE Linux Enterprise Server for SAP Applications 12 SP5",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP5:openssl-1_0_0-doc-1.0.2p-3.69.1.noarch"
        },
        "product_reference": "openssl-1_0_0-doc-1.0.2p-3.69.1.noarch",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP5"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2023-0464",
      "ids": [
        {
          "system_name": "SUSE CVE Page",
          "text": "https://www.suse.com/security/cve/CVE-2023-0464"
        }
      ],
      "notes": [
        {
          "category": "general",
          "text": "A security vulnerability has been identified in all supported versions\n\nof OpenSSL related to the verification of X.509 certificate chains\nthat include policy constraints.  Attackers may be able to exploit this\nvulnerability by creating a malicious certificate chain that triggers\nexponential use of computational resources, leading to a denial-of-service\n(DoS) attack on affected systems.\n\nPolicy processing is disabled by default but can be enabled by passing\nthe `-policy\u0027 argument to the command line utilities or by calling the\n`X509_VERIFY_PARAM_set1_policies()\u0027 function.",
          "title": "CVE description"
        }
      ],
      "product_status": {
        "recommended": [
          "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl-1_0_0-devel-1.0.2p-3.69.1.aarch64",
          "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl-1_0_0-devel-1.0.2p-3.69.1.x86_64",
          "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl1_0_0-1.0.2p-3.69.1.aarch64",
          "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl1_0_0-1.0.2p-3.69.1.x86_64",
          "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl1_0_0-32bit-1.0.2p-3.69.1.x86_64",
          "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl1_0_0-hmac-1.0.2p-3.69.1.aarch64",
          "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl1_0_0-hmac-1.0.2p-3.69.1.x86_64",
          "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.x86_64",
          "SUSE Linux Enterprise Server 12 SP4-ESPOS:openssl-1_0_0-1.0.2p-3.69.1.aarch64",
          "SUSE Linux Enterprise Server 12 SP4-ESPOS:openssl-1_0_0-1.0.2p-3.69.1.x86_64",
          "SUSE Linux Enterprise Server 12 SP4-ESPOS:openssl-1_0_0-doc-1.0.2p-3.69.1.noarch",
          "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl-1_0_0-devel-1.0.2p-3.69.1.aarch64",
          "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl-1_0_0-devel-1.0.2p-3.69.1.ppc64le",
          "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl-1_0_0-devel-1.0.2p-3.69.1.s390x",
          "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl-1_0_0-devel-1.0.2p-3.69.1.x86_64",
          "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_0_0-1.0.2p-3.69.1.aarch64",
          "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_0_0-1.0.2p-3.69.1.ppc64le",
          "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_0_0-1.0.2p-3.69.1.s390x",
          "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_0_0-1.0.2p-3.69.1.x86_64",
          "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_0_0-32bit-1.0.2p-3.69.1.s390x",
          "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_0_0-32bit-1.0.2p-3.69.1.x86_64",
          "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_0_0-hmac-1.0.2p-3.69.1.aarch64",
          "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_0_0-hmac-1.0.2p-3.69.1.ppc64le",
          "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_0_0-hmac-1.0.2p-3.69.1.s390x",
          "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_0_0-hmac-1.0.2p-3.69.1.x86_64",
          "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.s390x",
          "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.x86_64",
          "SUSE Linux Enterprise Server 12 SP4-LTSS:openssl-1_0_0-1.0.2p-3.69.1.aarch64",
          "SUSE Linux Enterprise Server 12 SP4-LTSS:openssl-1_0_0-1.0.2p-3.69.1.ppc64le",
          "SUSE Linux Enterprise Server 12 SP4-LTSS:openssl-1_0_0-1.0.2p-3.69.1.s390x",
          "SUSE Linux Enterprise Server 12 SP4-LTSS:openssl-1_0_0-1.0.2p-3.69.1.x86_64",
          "SUSE Linux Enterprise Server 12 SP4-LTSS:openssl-1_0_0-doc-1.0.2p-3.69.1.noarch",
          "SUSE Linux Enterprise Server 12 SP5:libopenssl-1_0_0-devel-1.0.2p-3.69.1.aarch64",
          "SUSE Linux Enterprise Server 12 SP5:libopenssl-1_0_0-devel-1.0.2p-3.69.1.ppc64le",
          "SUSE Linux Enterprise Server 12 SP5:libopenssl-1_0_0-devel-1.0.2p-3.69.1.s390x",
          "SUSE Linux Enterprise Server 12 SP5:libopenssl-1_0_0-devel-1.0.2p-3.69.1.x86_64",
          "SUSE Linux Enterprise Server 12 SP5:libopenssl1_0_0-1.0.2p-3.69.1.aarch64",
          "SUSE Linux Enterprise Server 12 SP5:libopenssl1_0_0-1.0.2p-3.69.1.ppc64le",
          "SUSE Linux Enterprise Server 12 SP5:libopenssl1_0_0-1.0.2p-3.69.1.s390x",
          "SUSE Linux Enterprise Server 12 SP5:libopenssl1_0_0-1.0.2p-3.69.1.x86_64",
          "SUSE Linux Enterprise Server 12 SP5:libopenssl1_0_0-32bit-1.0.2p-3.69.1.s390x",
          "SUSE Linux Enterprise Server 12 SP5:libopenssl1_0_0-32bit-1.0.2p-3.69.1.x86_64",
          "SUSE Linux Enterprise Server 12 SP5:libopenssl1_0_0-hmac-1.0.2p-3.69.1.aarch64",
          "SUSE Linux Enterprise Server 12 SP5:libopenssl1_0_0-hmac-1.0.2p-3.69.1.ppc64le",
          "SUSE Linux Enterprise Server 12 SP5:libopenssl1_0_0-hmac-1.0.2p-3.69.1.s390x",
          "SUSE Linux Enterprise Server 12 SP5:libopenssl1_0_0-hmac-1.0.2p-3.69.1.x86_64",
          "SUSE Linux Enterprise Server 12 SP5:libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.s390x",
          "SUSE Linux Enterprise Server 12 SP5:libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.x86_64",
          "SUSE Linux Enterprise Server 12 SP5:openssl-1_0_0-1.0.2p-3.69.1.aarch64",
          "SUSE Linux Enterprise Server 12 SP5:openssl-1_0_0-1.0.2p-3.69.1.ppc64le",
          "SUSE Linux Enterprise Server 12 SP5:openssl-1_0_0-1.0.2p-3.69.1.s390x",
          "SUSE Linux Enterprise Server 12 SP5:openssl-1_0_0-1.0.2p-3.69.1.x86_64",
          "SUSE Linux Enterprise Server 12 SP5:openssl-1_0_0-doc-1.0.2p-3.69.1.noarch",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl-1_0_0-devel-1.0.2p-3.69.1.ppc64le",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl-1_0_0-devel-1.0.2p-3.69.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl1_0_0-1.0.2p-3.69.1.ppc64le",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl1_0_0-1.0.2p-3.69.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl1_0_0-32bit-1.0.2p-3.69.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl1_0_0-hmac-1.0.2p-3.69.1.ppc64le",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl1_0_0-hmac-1.0.2p-3.69.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP4:openssl-1_0_0-1.0.2p-3.69.1.ppc64le",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP4:openssl-1_0_0-1.0.2p-3.69.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP4:openssl-1_0_0-doc-1.0.2p-3.69.1.noarch",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl-1_0_0-devel-1.0.2p-3.69.1.aarch64",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl-1_0_0-devel-1.0.2p-3.69.1.ppc64le",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl-1_0_0-devel-1.0.2p-3.69.1.s390x",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl-1_0_0-devel-1.0.2p-3.69.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_0_0-1.0.2p-3.69.1.aarch64",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_0_0-1.0.2p-3.69.1.ppc64le",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_0_0-1.0.2p-3.69.1.s390x",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_0_0-1.0.2p-3.69.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_0_0-32bit-1.0.2p-3.69.1.s390x",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_0_0-32bit-1.0.2p-3.69.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_0_0-hmac-1.0.2p-3.69.1.aarch64",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_0_0-hmac-1.0.2p-3.69.1.ppc64le",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_0_0-hmac-1.0.2p-3.69.1.s390x",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_0_0-hmac-1.0.2p-3.69.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.s390x",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP5:openssl-1_0_0-1.0.2p-3.69.1.aarch64",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP5:openssl-1_0_0-1.0.2p-3.69.1.ppc64le",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP5:openssl-1_0_0-1.0.2p-3.69.1.s390x",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP5:openssl-1_0_0-1.0.2p-3.69.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP5:openssl-1_0_0-doc-1.0.2p-3.69.1.noarch",
          "SUSE Linux Enterprise Software Development Kit 12 SP5:libopenssl-1_0_0-devel-1.0.2p-3.69.1.aarch64",
          "SUSE Linux Enterprise Software Development Kit 12 SP5:libopenssl-1_0_0-devel-1.0.2p-3.69.1.ppc64le",
          "SUSE Linux Enterprise Software Development Kit 12 SP5:libopenssl-1_0_0-devel-1.0.2p-3.69.1.s390x",
          "SUSE Linux Enterprise Software Development Kit 12 SP5:libopenssl-1_0_0-devel-1.0.2p-3.69.1.x86_64",
          "SUSE Linux Enterprise Software Development Kit 12 SP5:libopenssl-1_0_0-devel-32bit-1.0.2p-3.69.1.s390x",
          "SUSE Linux Enterprise Software Development Kit 12 SP5:libopenssl-1_0_0-devel-32bit-1.0.2p-3.69.1.x86_64",
          "SUSE OpenStack Cloud 9:libopenssl-1_0_0-devel-1.0.2p-3.69.1.x86_64",
          "SUSE OpenStack Cloud 9:libopenssl1_0_0-1.0.2p-3.69.1.x86_64",
          "SUSE OpenStack Cloud 9:libopenssl1_0_0-32bit-1.0.2p-3.69.1.x86_64",
          "SUSE OpenStack Cloud 9:libopenssl1_0_0-hmac-1.0.2p-3.69.1.x86_64",
          "SUSE OpenStack Cloud 9:libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.x86_64",
          "SUSE OpenStack Cloud 9:openssl-1_0_0-1.0.2p-3.69.1.x86_64",
          "SUSE OpenStack Cloud 9:openssl-1_0_0-doc-1.0.2p-3.69.1.noarch",
          "SUSE OpenStack Cloud Crowbar 9:libopenssl-1_0_0-devel-1.0.2p-3.69.1.x86_64",
          "SUSE OpenStack Cloud Crowbar 9:libopenssl1_0_0-1.0.2p-3.69.1.x86_64",
          "SUSE OpenStack Cloud Crowbar 9:libopenssl1_0_0-32bit-1.0.2p-3.69.1.x86_64",
          "SUSE OpenStack Cloud Crowbar 9:libopenssl1_0_0-hmac-1.0.2p-3.69.1.x86_64",
          "SUSE OpenStack Cloud Crowbar 9:libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.x86_64",
          "SUSE OpenStack Cloud Crowbar 9:openssl-1_0_0-1.0.2p-3.69.1.x86_64",
          "SUSE OpenStack Cloud Crowbar 9:openssl-1_0_0-doc-1.0.2p-3.69.1.noarch"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "CVE-2023-0464",
          "url": "https://www.suse.com/security/cve/CVE-2023-0464"
        },
        {
          "category": "external",
          "summary": "SUSE Bug 1209624 for CVE-2023-0464",
          "url": "https://bugzilla.suse.com/1209624"
        },
        {
          "category": "external",
          "summary": "SUSE Bug 1225628 for CVE-2023-0464",
          "url": "https://bugzilla.suse.com/1225628"
        }
      ],
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or \"zypper patch\".\n",
          "product_ids": [
            "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl-1_0_0-devel-1.0.2p-3.69.1.aarch64",
            "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl-1_0_0-devel-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl1_0_0-1.0.2p-3.69.1.aarch64",
            "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl1_0_0-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl1_0_0-32bit-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl1_0_0-hmac-1.0.2p-3.69.1.aarch64",
            "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl1_0_0-hmac-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP4-ESPOS:openssl-1_0_0-1.0.2p-3.69.1.aarch64",
            "SUSE Linux Enterprise Server 12 SP4-ESPOS:openssl-1_0_0-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP4-ESPOS:openssl-1_0_0-doc-1.0.2p-3.69.1.noarch",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl-1_0_0-devel-1.0.2p-3.69.1.aarch64",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl-1_0_0-devel-1.0.2p-3.69.1.ppc64le",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl-1_0_0-devel-1.0.2p-3.69.1.s390x",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl-1_0_0-devel-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_0_0-1.0.2p-3.69.1.aarch64",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_0_0-1.0.2p-3.69.1.ppc64le",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_0_0-1.0.2p-3.69.1.s390x",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_0_0-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_0_0-32bit-1.0.2p-3.69.1.s390x",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_0_0-32bit-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_0_0-hmac-1.0.2p-3.69.1.aarch64",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_0_0-hmac-1.0.2p-3.69.1.ppc64le",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_0_0-hmac-1.0.2p-3.69.1.s390x",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_0_0-hmac-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.s390x",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:openssl-1_0_0-1.0.2p-3.69.1.aarch64",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:openssl-1_0_0-1.0.2p-3.69.1.ppc64le",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:openssl-1_0_0-1.0.2p-3.69.1.s390x",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:openssl-1_0_0-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:openssl-1_0_0-doc-1.0.2p-3.69.1.noarch",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl-1_0_0-devel-1.0.2p-3.69.1.aarch64",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl-1_0_0-devel-1.0.2p-3.69.1.ppc64le",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl-1_0_0-devel-1.0.2p-3.69.1.s390x",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl-1_0_0-devel-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl1_0_0-1.0.2p-3.69.1.aarch64",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl1_0_0-1.0.2p-3.69.1.ppc64le",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl1_0_0-1.0.2p-3.69.1.s390x",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl1_0_0-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl1_0_0-32bit-1.0.2p-3.69.1.s390x",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl1_0_0-32bit-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl1_0_0-hmac-1.0.2p-3.69.1.aarch64",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl1_0_0-hmac-1.0.2p-3.69.1.ppc64le",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl1_0_0-hmac-1.0.2p-3.69.1.s390x",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl1_0_0-hmac-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.s390x",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP5:openssl-1_0_0-1.0.2p-3.69.1.aarch64",
            "SUSE Linux Enterprise Server 12 SP5:openssl-1_0_0-1.0.2p-3.69.1.ppc64le",
            "SUSE Linux Enterprise Server 12 SP5:openssl-1_0_0-1.0.2p-3.69.1.s390x",
            "SUSE Linux Enterprise Server 12 SP5:openssl-1_0_0-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP5:openssl-1_0_0-doc-1.0.2p-3.69.1.noarch",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl-1_0_0-devel-1.0.2p-3.69.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl-1_0_0-devel-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl1_0_0-1.0.2p-3.69.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl1_0_0-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl1_0_0-32bit-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl1_0_0-hmac-1.0.2p-3.69.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl1_0_0-hmac-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP4:openssl-1_0_0-1.0.2p-3.69.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP4:openssl-1_0_0-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP4:openssl-1_0_0-doc-1.0.2p-3.69.1.noarch",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl-1_0_0-devel-1.0.2p-3.69.1.aarch64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl-1_0_0-devel-1.0.2p-3.69.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl-1_0_0-devel-1.0.2p-3.69.1.s390x",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl-1_0_0-devel-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_0_0-1.0.2p-3.69.1.aarch64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_0_0-1.0.2p-3.69.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_0_0-1.0.2p-3.69.1.s390x",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_0_0-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_0_0-32bit-1.0.2p-3.69.1.s390x",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_0_0-32bit-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_0_0-hmac-1.0.2p-3.69.1.aarch64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_0_0-hmac-1.0.2p-3.69.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_0_0-hmac-1.0.2p-3.69.1.s390x",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_0_0-hmac-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.s390x",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:openssl-1_0_0-1.0.2p-3.69.1.aarch64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:openssl-1_0_0-1.0.2p-3.69.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:openssl-1_0_0-1.0.2p-3.69.1.s390x",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:openssl-1_0_0-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:openssl-1_0_0-doc-1.0.2p-3.69.1.noarch",
            "SUSE Linux Enterprise Software Development Kit 12 SP5:libopenssl-1_0_0-devel-1.0.2p-3.69.1.aarch64",
            "SUSE Linux Enterprise Software Development Kit 12 SP5:libopenssl-1_0_0-devel-1.0.2p-3.69.1.ppc64le",
            "SUSE Linux Enterprise Software Development Kit 12 SP5:libopenssl-1_0_0-devel-1.0.2p-3.69.1.s390x",
            "SUSE Linux Enterprise Software Development Kit 12 SP5:libopenssl-1_0_0-devel-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Software Development Kit 12 SP5:libopenssl-1_0_0-devel-32bit-1.0.2p-3.69.1.s390x",
            "SUSE Linux Enterprise Software Development Kit 12 SP5:libopenssl-1_0_0-devel-32bit-1.0.2p-3.69.1.x86_64",
            "SUSE OpenStack Cloud 9:libopenssl-1_0_0-devel-1.0.2p-3.69.1.x86_64",
            "SUSE OpenStack Cloud 9:libopenssl1_0_0-1.0.2p-3.69.1.x86_64",
            "SUSE OpenStack Cloud 9:libopenssl1_0_0-32bit-1.0.2p-3.69.1.x86_64",
            "SUSE OpenStack Cloud 9:libopenssl1_0_0-hmac-1.0.2p-3.69.1.x86_64",
            "SUSE OpenStack Cloud 9:libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.x86_64",
            "SUSE OpenStack Cloud 9:openssl-1_0_0-1.0.2p-3.69.1.x86_64",
            "SUSE OpenStack Cloud 9:openssl-1_0_0-doc-1.0.2p-3.69.1.noarch",
            "SUSE OpenStack Cloud Crowbar 9:libopenssl-1_0_0-devel-1.0.2p-3.69.1.x86_64",
            "SUSE OpenStack Cloud Crowbar 9:libopenssl1_0_0-1.0.2p-3.69.1.x86_64",
            "SUSE OpenStack Cloud Crowbar 9:libopenssl1_0_0-32bit-1.0.2p-3.69.1.x86_64",
            "SUSE OpenStack Cloud Crowbar 9:libopenssl1_0_0-hmac-1.0.2p-3.69.1.x86_64",
            "SUSE OpenStack Cloud Crowbar 9:libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.x86_64",
            "SUSE OpenStack Cloud Crowbar 9:openssl-1_0_0-1.0.2p-3.69.1.x86_64",
            "SUSE OpenStack Cloud Crowbar 9:openssl-1_0_0-doc-1.0.2p-3.69.1.noarch"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl-1_0_0-devel-1.0.2p-3.69.1.aarch64",
            "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl-1_0_0-devel-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl1_0_0-1.0.2p-3.69.1.aarch64",
            "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl1_0_0-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl1_0_0-32bit-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl1_0_0-hmac-1.0.2p-3.69.1.aarch64",
            "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl1_0_0-hmac-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP4-ESPOS:libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP4-ESPOS:openssl-1_0_0-1.0.2p-3.69.1.aarch64",
            "SUSE Linux Enterprise Server 12 SP4-ESPOS:openssl-1_0_0-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP4-ESPOS:openssl-1_0_0-doc-1.0.2p-3.69.1.noarch",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl-1_0_0-devel-1.0.2p-3.69.1.aarch64",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl-1_0_0-devel-1.0.2p-3.69.1.ppc64le",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl-1_0_0-devel-1.0.2p-3.69.1.s390x",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl-1_0_0-devel-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_0_0-1.0.2p-3.69.1.aarch64",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_0_0-1.0.2p-3.69.1.ppc64le",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_0_0-1.0.2p-3.69.1.s390x",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_0_0-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_0_0-32bit-1.0.2p-3.69.1.s390x",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_0_0-32bit-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_0_0-hmac-1.0.2p-3.69.1.aarch64",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_0_0-hmac-1.0.2p-3.69.1.ppc64le",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_0_0-hmac-1.0.2p-3.69.1.s390x",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_0_0-hmac-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.s390x",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:openssl-1_0_0-1.0.2p-3.69.1.aarch64",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:openssl-1_0_0-1.0.2p-3.69.1.ppc64le",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:openssl-1_0_0-1.0.2p-3.69.1.s390x",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:openssl-1_0_0-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP4-LTSS:openssl-1_0_0-doc-1.0.2p-3.69.1.noarch",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl-1_0_0-devel-1.0.2p-3.69.1.aarch64",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl-1_0_0-devel-1.0.2p-3.69.1.ppc64le",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl-1_0_0-devel-1.0.2p-3.69.1.s390x",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl-1_0_0-devel-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl1_0_0-1.0.2p-3.69.1.aarch64",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl1_0_0-1.0.2p-3.69.1.ppc64le",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl1_0_0-1.0.2p-3.69.1.s390x",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl1_0_0-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl1_0_0-32bit-1.0.2p-3.69.1.s390x",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl1_0_0-32bit-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl1_0_0-hmac-1.0.2p-3.69.1.aarch64",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl1_0_0-hmac-1.0.2p-3.69.1.ppc64le",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl1_0_0-hmac-1.0.2p-3.69.1.s390x",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl1_0_0-hmac-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.s390x",
            "SUSE Linux Enterprise Server 12 SP5:libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP5:openssl-1_0_0-1.0.2p-3.69.1.aarch64",
            "SUSE Linux Enterprise Server 12 SP5:openssl-1_0_0-1.0.2p-3.69.1.ppc64le",
            "SUSE Linux Enterprise Server 12 SP5:openssl-1_0_0-1.0.2p-3.69.1.s390x",
            "SUSE Linux Enterprise Server 12 SP5:openssl-1_0_0-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server 12 SP5:openssl-1_0_0-doc-1.0.2p-3.69.1.noarch",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl-1_0_0-devel-1.0.2p-3.69.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl-1_0_0-devel-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl1_0_0-1.0.2p-3.69.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl1_0_0-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl1_0_0-32bit-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl1_0_0-hmac-1.0.2p-3.69.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl1_0_0-hmac-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP4:openssl-1_0_0-1.0.2p-3.69.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP4:openssl-1_0_0-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP4:openssl-1_0_0-doc-1.0.2p-3.69.1.noarch",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl-1_0_0-devel-1.0.2p-3.69.1.aarch64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl-1_0_0-devel-1.0.2p-3.69.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl-1_0_0-devel-1.0.2p-3.69.1.s390x",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl-1_0_0-devel-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_0_0-1.0.2p-3.69.1.aarch64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_0_0-1.0.2p-3.69.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_0_0-1.0.2p-3.69.1.s390x",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_0_0-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_0_0-32bit-1.0.2p-3.69.1.s390x",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_0_0-32bit-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_0_0-hmac-1.0.2p-3.69.1.aarch64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_0_0-hmac-1.0.2p-3.69.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_0_0-hmac-1.0.2p-3.69.1.s390x",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_0_0-hmac-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.s390x",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:openssl-1_0_0-1.0.2p-3.69.1.aarch64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:openssl-1_0_0-1.0.2p-3.69.1.ppc64le",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:openssl-1_0_0-1.0.2p-3.69.1.s390x",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:openssl-1_0_0-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:openssl-1_0_0-doc-1.0.2p-3.69.1.noarch",
            "SUSE Linux Enterprise Software Development Kit 12 SP5:libopenssl-1_0_0-devel-1.0.2p-3.69.1.aarch64",
            "SUSE Linux Enterprise Software Development Kit 12 SP5:libopenssl-1_0_0-devel-1.0.2p-3.69.1.ppc64le",
            "SUSE Linux Enterprise Software Development Kit 12 SP5:libopenssl-1_0_0-devel-1.0.2p-3.69.1.s390x",
            "SUSE Linux Enterprise Software Development Kit 12 SP5:libopenssl-1_0_0-devel-1.0.2p-3.69.1.x86_64",
            "SUSE Linux Enterprise Software Development Kit 12 SP5:libopenssl-1_0_0-devel-32bit-1.0.2p-3.69.1.s390x",
            "SUSE Linux Enterprise Software Development Kit 12 SP5:libopenssl-1_0_0-devel-32bit-1.0.2p-3.69.1.x86_64",
            "SUSE OpenStack Cloud 9:libopenssl-1_0_0-devel-1.0.2p-3.69.1.x86_64",
            "SUSE OpenStack Cloud 9:libopenssl1_0_0-1.0.2p-3.69.1.x86_64",
            "SUSE OpenStack Cloud 9:libopenssl1_0_0-32bit-1.0.2p-3.69.1.x86_64",
            "SUSE OpenStack Cloud 9:libopenssl1_0_0-hmac-1.0.2p-3.69.1.x86_64",
            "SUSE OpenStack Cloud 9:libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.x86_64",
            "SUSE OpenStack Cloud 9:openssl-1_0_0-1.0.2p-3.69.1.x86_64",
            "SUSE OpenStack Cloud 9:openssl-1_0_0-doc-1.0.2p-3.69.1.noarch",
            "SUSE OpenStack Cloud Crowbar 9:libopenssl-1_0_0-devel-1.0.2p-3.69.1.x86_64",
            "SUSE OpenStack Cloud Crowbar 9:libopenssl1_0_0-1.0.2p-3.69.1.x86_64",
            "SUSE OpenStack Cloud Crowbar 9:libopenssl1_0_0-32bit-1.0.2p-3.69.1.x86_64",
            "SUSE OpenStack Cloud Crowbar 9:libopenssl1_0_0-hmac-1.0.2p-3.69.1.x86_64",
            "SUSE OpenStack Cloud Crowbar 9:libopenssl1_0_0-hmac-32bit-1.0.2p-3.69.1.x86_64",
            "SUSE OpenStack Cloud Crowbar 9:openssl-1_0_0-1.0.2p-3.69.1.x86_64",
            "SUSE OpenStack Cloud Crowbar 9:openssl-1_0_0-doc-1.0.2p-3.69.1.noarch"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "date": "2023-03-30T14:16:24Z",
          "details": "moderate"
        }
      ],
      "title": "CVE-2023-0464"
    }
  ]
}

{
  "document": {
    "aggregate_severity": {
      "namespace": "https://www.suse.com/support/security/rating/",
      "text": "moderate"
    },
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Copyright 2024 SUSE LLC. All rights reserved.",
      "tlp": {
        "label": "WHITE",
        "url": "https://www.first.org/tlp/"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "Security update for openssl-1_1",
        "title": "Title of the patch"
      },
      {
        "category": "description",
        "text": "This update for openssl-1_1 fixes the following issues:\n\n- CVE-2023-0464: Fixed excessive Resource Usage Verifying X.509 Policy Constraints (bsc#1209624).\n",
        "title": "Description of the patch"
      },
      {
        "category": "details",
        "text": "SUSE-2023-1745,SUSE-SLE-Micro-5.3-2023-1745,SUSE-SLE-Micro-5.4-2023-1745,SUSE-SLE-Module-Basesystem-15-SP4-2023-1745,openSUSE-Leap-Micro-5.3-2023-1745,openSUSE-SLE-15.4-2023-1745",
        "title": "Patchnames"
      },
      {
        "category": "legal_disclaimer",
        "text": "CSAF 2.0 data is provided by SUSE under the Creative Commons License 4.0 with Attribution (CC-BY-4.0).",
        "title": "Terms of use"
      }
    ],
    "publisher": {
      "category": "vendor",
      "contact_details": "https://www.suse.com/support/security/contact/",
      "name": "SUSE Product Security Team",
      "namespace": "https://www.suse.com/"
    },
    "references": [
      {
        "category": "external",
        "summary": "SUSE ratings",
        "url": "https://www.suse.com/support/security/rating/"
      },
      {
        "category": "self",
        "summary": "URL of this CSAF notice",
        "url": "https://ftp.suse.com/pub/projects/security/csaf/suse-su-2023_1745-1.json"
      },
      {
        "category": "self",
        "summary": "URL for SUSE-SU-2023:1745-1",
        "url": "https://www.suse.com/support/update/announcement/2023/suse-su-20231745-1/"
      },
      {
        "category": "self",
        "summary": "E-Mail link for SUSE-SU-2023:1745-1",
        "url": "https://lists.suse.com/pipermail/sle-updates/2023-April/028609.html"
      },
      {
        "category": "self",
        "summary": "SUSE Bug 1209624",
        "url": "https://bugzilla.suse.com/1209624"
      },
      {
        "category": "self",
        "summary": "SUSE CVE CVE-2023-0464 page",
        "url": "https://www.suse.com/security/cve/CVE-2023-0464/"
      }
    ],
    "title": "Security update for openssl-1_1",
    "tracking": {
      "current_release_date": "2023-04-04T07:05:33Z",
      "generator": {
        "date": "2023-04-04T07:05:33Z",
        "engine": {
          "name": "cve-database.git:bin/generate-csaf.pl",
          "version": "1"
        }
      },
      "id": "SUSE-SU-2023:1745-1",
      "initial_release_date": "2023-04-04T07:05:33Z",
      "revision_history": [
        {
          "date": "2023-04-04T07:05:33Z",
          "number": "1",
          "summary": "Current version"
        }
      ],
      "status": "final",
      "version": "1"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-1_1-devel-1.1.1l-150400.7.31.2.aarch64",
                "product": {
                  "name": "libopenssl-1_1-devel-1.1.1l-150400.7.31.2.aarch64",
                  "product_id": "libopenssl-1_1-devel-1.1.1l-150400.7.31.2.aarch64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-1.1.1l-150400.7.31.2.aarch64",
                "product": {
                  "name": "libopenssl1_1-1.1.1l-150400.7.31.2.aarch64",
                  "product_id": "libopenssl1_1-1.1.1l-150400.7.31.2.aarch64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-hmac-1.1.1l-150400.7.31.2.aarch64",
                "product": {
                  "name": "libopenssl1_1-hmac-1.1.1l-150400.7.31.2.aarch64",
                  "product_id": "libopenssl1_1-hmac-1.1.1l-150400.7.31.2.aarch64"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-1_1-1.1.1l-150400.7.31.2.aarch64",
                "product": {
                  "name": "openssl-1_1-1.1.1l-150400.7.31.2.aarch64",
                  "product_id": "openssl-1_1-1.1.1l-150400.7.31.2.aarch64"
                }
              }
            ],
            "category": "architecture",
            "name": "aarch64"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-1_1-devel-64bit-1.1.1l-150400.7.31.2.aarch64_ilp32",
                "product": {
                  "name": "libopenssl-1_1-devel-64bit-1.1.1l-150400.7.31.2.aarch64_ilp32",
                  "product_id": "libopenssl-1_1-devel-64bit-1.1.1l-150400.7.31.2.aarch64_ilp32"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-64bit-1.1.1l-150400.7.31.2.aarch64_ilp32",
                "product": {
                  "name": "libopenssl1_1-64bit-1.1.1l-150400.7.31.2.aarch64_ilp32",
                  "product_id": "libopenssl1_1-64bit-1.1.1l-150400.7.31.2.aarch64_ilp32"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-hmac-64bit-1.1.1l-150400.7.31.2.aarch64_ilp32",
                "product": {
                  "name": "libopenssl1_1-hmac-64bit-1.1.1l-150400.7.31.2.aarch64_ilp32",
                  "product_id": "libopenssl1_1-hmac-64bit-1.1.1l-150400.7.31.2.aarch64_ilp32"
                }
              }
            ],
            "category": "architecture",
            "name": "aarch64_ilp32"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-1_1-devel-1.1.1l-150400.7.31.2.i586",
                "product": {
                  "name": "libopenssl-1_1-devel-1.1.1l-150400.7.31.2.i586",
                  "product_id": "libopenssl-1_1-devel-1.1.1l-150400.7.31.2.i586"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-1.1.1l-150400.7.31.2.i586",
                "product": {
                  "name": "libopenssl1_1-1.1.1l-150400.7.31.2.i586",
                  "product_id": "libopenssl1_1-1.1.1l-150400.7.31.2.i586"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-hmac-1.1.1l-150400.7.31.2.i586",
                "product": {
                  "name": "libopenssl1_1-hmac-1.1.1l-150400.7.31.2.i586",
                  "product_id": "libopenssl1_1-hmac-1.1.1l-150400.7.31.2.i586"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-1_1-1.1.1l-150400.7.31.2.i586",
                "product": {
                  "name": "openssl-1_1-1.1.1l-150400.7.31.2.i586",
                  "product_id": "openssl-1_1-1.1.1l-150400.7.31.2.i586"
                }
              }
            ],
            "category": "architecture",
            "name": "i586"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "openssl-1_1-doc-1.1.1l-150400.7.31.2.noarch",
                "product": {
                  "name": "openssl-1_1-doc-1.1.1l-150400.7.31.2.noarch",
                  "product_id": "openssl-1_1-doc-1.1.1l-150400.7.31.2.noarch"
                }
              }
            ],
            "category": "architecture",
            "name": "noarch"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-1_1-devel-1.1.1l-150400.7.31.2.ppc64le",
                "product": {
                  "name": "libopenssl-1_1-devel-1.1.1l-150400.7.31.2.ppc64le",
                  "product_id": "libopenssl-1_1-devel-1.1.1l-150400.7.31.2.ppc64le"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-1.1.1l-150400.7.31.2.ppc64le",
                "product": {
                  "name": "libopenssl1_1-1.1.1l-150400.7.31.2.ppc64le",
                  "product_id": "libopenssl1_1-1.1.1l-150400.7.31.2.ppc64le"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-hmac-1.1.1l-150400.7.31.2.ppc64le",
                "product": {
                  "name": "libopenssl1_1-hmac-1.1.1l-150400.7.31.2.ppc64le",
                  "product_id": "libopenssl1_1-hmac-1.1.1l-150400.7.31.2.ppc64le"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-1_1-1.1.1l-150400.7.31.2.ppc64le",
                "product": {
                  "name": "openssl-1_1-1.1.1l-150400.7.31.2.ppc64le",
                  "product_id": "openssl-1_1-1.1.1l-150400.7.31.2.ppc64le"
                }
              }
            ],
            "category": "architecture",
            "name": "ppc64le"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-1_1-devel-1.1.1l-150400.7.31.2.s390x",
                "product": {
                  "name": "libopenssl-1_1-devel-1.1.1l-150400.7.31.2.s390x",
                  "product_id": "libopenssl-1_1-devel-1.1.1l-150400.7.31.2.s390x"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-1.1.1l-150400.7.31.2.s390x",
                "product": {
                  "name": "libopenssl1_1-1.1.1l-150400.7.31.2.s390x",
                  "product_id": "libopenssl1_1-1.1.1l-150400.7.31.2.s390x"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-hmac-1.1.1l-150400.7.31.2.s390x",
                "product": {
                  "name": "libopenssl1_1-hmac-1.1.1l-150400.7.31.2.s390x",
                  "product_id": "libopenssl1_1-hmac-1.1.1l-150400.7.31.2.s390x"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-1_1-1.1.1l-150400.7.31.2.s390x",
                "product": {
                  "name": "openssl-1_1-1.1.1l-150400.7.31.2.s390x",
                  "product_id": "openssl-1_1-1.1.1l-150400.7.31.2.s390x"
                }
              }
            ],
            "category": "architecture",
            "name": "s390x"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-1_1-devel-1.1.1l-150400.7.31.2.x86_64",
                "product": {
                  "name": "libopenssl-1_1-devel-1.1.1l-150400.7.31.2.x86_64",
                  "product_id": "libopenssl-1_1-devel-1.1.1l-150400.7.31.2.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl-1_1-devel-32bit-1.1.1l-150400.7.31.2.x86_64",
                "product": {
                  "name": "libopenssl-1_1-devel-32bit-1.1.1l-150400.7.31.2.x86_64",
                  "product_id": "libopenssl-1_1-devel-32bit-1.1.1l-150400.7.31.2.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-1.1.1l-150400.7.31.2.x86_64",
                "product": {
                  "name": "libopenssl1_1-1.1.1l-150400.7.31.2.x86_64",
                  "product_id": "libopenssl1_1-1.1.1l-150400.7.31.2.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-32bit-1.1.1l-150400.7.31.2.x86_64",
                "product": {
                  "name": "libopenssl1_1-32bit-1.1.1l-150400.7.31.2.x86_64",
                  "product_id": "libopenssl1_1-32bit-1.1.1l-150400.7.31.2.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-hmac-1.1.1l-150400.7.31.2.x86_64",
                "product": {
                  "name": "libopenssl1_1-hmac-1.1.1l-150400.7.31.2.x86_64",
                  "product_id": "libopenssl1_1-hmac-1.1.1l-150400.7.31.2.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl1_1-hmac-32bit-1.1.1l-150400.7.31.2.x86_64",
                "product": {
                  "name": "libopenssl1_1-hmac-32bit-1.1.1l-150400.7.31.2.x86_64",
                  "product_id": "libopenssl1_1-hmac-32bit-1.1.1l-150400.7.31.2.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-1_1-1.1.1l-150400.7.31.2.x86_64",
                "product": {
                  "name": "openssl-1_1-1.1.1l-150400.7.31.2.x86_64",
                  "product_id": "openssl-1_1-1.1.1l-150400.7.31.2.x86_64"
                }
              }
            ],
            "category": "architecture",
            "name": "x86_64"
          },
          {
            "branches": [
              {
                "category": "product_name",
                "name": "SUSE Linux Enterprise Micro 5.3",
                "product": {
                  "name": "SUSE Linux Enterprise Micro 5.3",
                  "product_id": "SUSE Linux Enterprise Micro 5.3",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:sle-micro:5.3"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "SUSE Linux Enterprise Micro 5.4",
                "product": {
                  "name": "SUSE Linux Enterprise Micro 5.4",
                  "product_id": "SUSE Linux Enterprise Micro 5.4",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:sle-micro:5.4"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "SUSE Linux Enterprise Module for Basesystem 15 SP4",
                "product": {
                  "name": "SUSE Linux Enterprise Module for Basesystem 15 SP4",
                  "product_id": "SUSE Linux Enterprise Module for Basesystem 15 SP4",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:sle-module-basesystem:15:sp4"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "openSUSE Leap Micro 5.3",
                "product": {
                  "name": "openSUSE Leap Micro 5.3",
                  "product_id": "openSUSE Leap Micro 5.3",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:opensuse:leap-micro:5.3"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "openSUSE Leap 15.4",
                "product": {
                  "name": "openSUSE Leap 15.4",
                  "product_id": "openSUSE Leap 15.4",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:opensuse:leap:15.4"
                  }
                }
              }
            ],
            "category": "product_family",
            "name": "SUSE Linux Enterprise"
          }
        ],
        "category": "vendor",
        "name": "SUSE"
      }
    ],
    "relationships": [
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1l-150400.7.31.2.aarch64 as component of SUSE Linux Enterprise Micro 5.3",
          "product_id": "SUSE Linux Enterprise Micro 5.3:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.aarch64"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1l-150400.7.31.2.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Micro 5.3"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1l-150400.7.31.2.s390x as component of SUSE Linux Enterprise Micro 5.3",
          "product_id": "SUSE Linux Enterprise Micro 5.3:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.s390x"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1l-150400.7.31.2.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Micro 5.3"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1l-150400.7.31.2.x86_64 as component of SUSE Linux Enterprise Micro 5.3",
          "product_id": "SUSE Linux Enterprise Micro 5.3:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.x86_64"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1l-150400.7.31.2.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Micro 5.3"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1l-150400.7.31.2.aarch64 as component of SUSE Linux Enterprise Micro 5.3",
          "product_id": "SUSE Linux Enterprise Micro 5.3:libopenssl1_1-1.1.1l-150400.7.31.2.aarch64"
        },
        "product_reference": "libopenssl1_1-1.1.1l-150400.7.31.2.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Micro 5.3"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1l-150400.7.31.2.s390x as component of SUSE Linux Enterprise Micro 5.3",
          "product_id": "SUSE Linux Enterprise Micro 5.3:libopenssl1_1-1.1.1l-150400.7.31.2.s390x"
        },
        "product_reference": "libopenssl1_1-1.1.1l-150400.7.31.2.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Micro 5.3"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1l-150400.7.31.2.x86_64 as component of SUSE Linux Enterprise Micro 5.3",
          "product_id": "SUSE Linux Enterprise Micro 5.3:libopenssl1_1-1.1.1l-150400.7.31.2.x86_64"
        },
        "product_reference": "libopenssl1_1-1.1.1l-150400.7.31.2.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Micro 5.3"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1l-150400.7.31.2.aarch64 as component of SUSE Linux Enterprise Micro 5.3",
          "product_id": "SUSE Linux Enterprise Micro 5.3:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.aarch64"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1l-150400.7.31.2.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Micro 5.3"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1l-150400.7.31.2.s390x as component of SUSE Linux Enterprise Micro 5.3",
          "product_id": "SUSE Linux Enterprise Micro 5.3:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.s390x"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1l-150400.7.31.2.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Micro 5.3"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1l-150400.7.31.2.x86_64 as component of SUSE Linux Enterprise Micro 5.3",
          "product_id": "SUSE Linux Enterprise Micro 5.3:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1l-150400.7.31.2.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Micro 5.3"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1l-150400.7.31.2.aarch64 as component of SUSE Linux Enterprise Micro 5.3",
          "product_id": "SUSE Linux Enterprise Micro 5.3:openssl-1_1-1.1.1l-150400.7.31.2.aarch64"
        },
        "product_reference": "openssl-1_1-1.1.1l-150400.7.31.2.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Micro 5.3"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1l-150400.7.31.2.s390x as component of SUSE Linux Enterprise Micro 5.3",
          "product_id": "SUSE Linux Enterprise Micro 5.3:openssl-1_1-1.1.1l-150400.7.31.2.s390x"
        },
        "product_reference": "openssl-1_1-1.1.1l-150400.7.31.2.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Micro 5.3"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1l-150400.7.31.2.x86_64 as component of SUSE Linux Enterprise Micro 5.3",
          "product_id": "SUSE Linux Enterprise Micro 5.3:openssl-1_1-1.1.1l-150400.7.31.2.x86_64"
        },
        "product_reference": "openssl-1_1-1.1.1l-150400.7.31.2.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Micro 5.3"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1l-150400.7.31.2.aarch64 as component of SUSE Linux Enterprise Micro 5.4",
          "product_id": "SUSE Linux Enterprise Micro 5.4:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.aarch64"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1l-150400.7.31.2.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Micro 5.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1l-150400.7.31.2.s390x as component of SUSE Linux Enterprise Micro 5.4",
          "product_id": "SUSE Linux Enterprise Micro 5.4:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.s390x"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1l-150400.7.31.2.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Micro 5.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1l-150400.7.31.2.x86_64 as component of SUSE Linux Enterprise Micro 5.4",
          "product_id": "SUSE Linux Enterprise Micro 5.4:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.x86_64"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1l-150400.7.31.2.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Micro 5.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1l-150400.7.31.2.aarch64 as component of SUSE Linux Enterprise Micro 5.4",
          "product_id": "SUSE Linux Enterprise Micro 5.4:libopenssl1_1-1.1.1l-150400.7.31.2.aarch64"
        },
        "product_reference": "libopenssl1_1-1.1.1l-150400.7.31.2.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Micro 5.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1l-150400.7.31.2.s390x as component of SUSE Linux Enterprise Micro 5.4",
          "product_id": "SUSE Linux Enterprise Micro 5.4:libopenssl1_1-1.1.1l-150400.7.31.2.s390x"
        },
        "product_reference": "libopenssl1_1-1.1.1l-150400.7.31.2.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Micro 5.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1l-150400.7.31.2.x86_64 as component of SUSE Linux Enterprise Micro 5.4",
          "product_id": "SUSE Linux Enterprise Micro 5.4:libopenssl1_1-1.1.1l-150400.7.31.2.x86_64"
        },
        "product_reference": "libopenssl1_1-1.1.1l-150400.7.31.2.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Micro 5.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1l-150400.7.31.2.aarch64 as component of SUSE Linux Enterprise Micro 5.4",
          "product_id": "SUSE Linux Enterprise Micro 5.4:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.aarch64"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1l-150400.7.31.2.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Micro 5.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1l-150400.7.31.2.s390x as component of SUSE Linux Enterprise Micro 5.4",
          "product_id": "SUSE Linux Enterprise Micro 5.4:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.s390x"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1l-150400.7.31.2.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Micro 5.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1l-150400.7.31.2.x86_64 as component of SUSE Linux Enterprise Micro 5.4",
          "product_id": "SUSE Linux Enterprise Micro 5.4:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1l-150400.7.31.2.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Micro 5.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1l-150400.7.31.2.aarch64 as component of SUSE Linux Enterprise Micro 5.4",
          "product_id": "SUSE Linux Enterprise Micro 5.4:openssl-1_1-1.1.1l-150400.7.31.2.aarch64"
        },
        "product_reference": "openssl-1_1-1.1.1l-150400.7.31.2.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Micro 5.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1l-150400.7.31.2.s390x as component of SUSE Linux Enterprise Micro 5.4",
          "product_id": "SUSE Linux Enterprise Micro 5.4:openssl-1_1-1.1.1l-150400.7.31.2.s390x"
        },
        "product_reference": "openssl-1_1-1.1.1l-150400.7.31.2.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Micro 5.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1l-150400.7.31.2.x86_64 as component of SUSE Linux Enterprise Micro 5.4",
          "product_id": "SUSE Linux Enterprise Micro 5.4:openssl-1_1-1.1.1l-150400.7.31.2.x86_64"
        },
        "product_reference": "openssl-1_1-1.1.1l-150400.7.31.2.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Micro 5.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1l-150400.7.31.2.aarch64 as component of SUSE Linux Enterprise Module for Basesystem 15 SP4",
          "product_id": "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.aarch64"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1l-150400.7.31.2.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Basesystem 15 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1l-150400.7.31.2.ppc64le as component of SUSE Linux Enterprise Module for Basesystem 15 SP4",
          "product_id": "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.ppc64le"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1l-150400.7.31.2.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Basesystem 15 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1l-150400.7.31.2.s390x as component of SUSE Linux Enterprise Module for Basesystem 15 SP4",
          "product_id": "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.s390x"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1l-150400.7.31.2.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Basesystem 15 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1l-150400.7.31.2.x86_64 as component of SUSE Linux Enterprise Module for Basesystem 15 SP4",
          "product_id": "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.x86_64"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1l-150400.7.31.2.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Basesystem 15 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-32bit-1.1.1l-150400.7.31.2.x86_64 as component of SUSE Linux Enterprise Module for Basesystem 15 SP4",
          "product_id": "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl-1_1-devel-32bit-1.1.1l-150400.7.31.2.x86_64"
        },
        "product_reference": "libopenssl-1_1-devel-32bit-1.1.1l-150400.7.31.2.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Basesystem 15 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1l-150400.7.31.2.aarch64 as component of SUSE Linux Enterprise Module for Basesystem 15 SP4",
          "product_id": "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl1_1-1.1.1l-150400.7.31.2.aarch64"
        },
        "product_reference": "libopenssl1_1-1.1.1l-150400.7.31.2.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Basesystem 15 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1l-150400.7.31.2.ppc64le as component of SUSE Linux Enterprise Module for Basesystem 15 SP4",
          "product_id": "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl1_1-1.1.1l-150400.7.31.2.ppc64le"
        },
        "product_reference": "libopenssl1_1-1.1.1l-150400.7.31.2.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Basesystem 15 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1l-150400.7.31.2.s390x as component of SUSE Linux Enterprise Module for Basesystem 15 SP4",
          "product_id": "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl1_1-1.1.1l-150400.7.31.2.s390x"
        },
        "product_reference": "libopenssl1_1-1.1.1l-150400.7.31.2.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Basesystem 15 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1l-150400.7.31.2.x86_64 as component of SUSE Linux Enterprise Module for Basesystem 15 SP4",
          "product_id": "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl1_1-1.1.1l-150400.7.31.2.x86_64"
        },
        "product_reference": "libopenssl1_1-1.1.1l-150400.7.31.2.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Basesystem 15 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-32bit-1.1.1l-150400.7.31.2.x86_64 as component of SUSE Linux Enterprise Module for Basesystem 15 SP4",
          "product_id": "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl1_1-32bit-1.1.1l-150400.7.31.2.x86_64"
        },
        "product_reference": "libopenssl1_1-32bit-1.1.1l-150400.7.31.2.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Basesystem 15 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1l-150400.7.31.2.aarch64 as component of SUSE Linux Enterprise Module for Basesystem 15 SP4",
          "product_id": "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.aarch64"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1l-150400.7.31.2.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Basesystem 15 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1l-150400.7.31.2.ppc64le as component of SUSE Linux Enterprise Module for Basesystem 15 SP4",
          "product_id": "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.ppc64le"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1l-150400.7.31.2.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Basesystem 15 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1l-150400.7.31.2.s390x as component of SUSE Linux Enterprise Module for Basesystem 15 SP4",
          "product_id": "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.s390x"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1l-150400.7.31.2.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Basesystem 15 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1l-150400.7.31.2.x86_64 as component of SUSE Linux Enterprise Module for Basesystem 15 SP4",
          "product_id": "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1l-150400.7.31.2.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Basesystem 15 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-32bit-1.1.1l-150400.7.31.2.x86_64 as component of SUSE Linux Enterprise Module for Basesystem 15 SP4",
          "product_id": "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl1_1-hmac-32bit-1.1.1l-150400.7.31.2.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-32bit-1.1.1l-150400.7.31.2.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Basesystem 15 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1l-150400.7.31.2.aarch64 as component of SUSE Linux Enterprise Module for Basesystem 15 SP4",
          "product_id": "SUSE Linux Enterprise Module for Basesystem 15 SP4:openssl-1_1-1.1.1l-150400.7.31.2.aarch64"
        },
        "product_reference": "openssl-1_1-1.1.1l-150400.7.31.2.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Basesystem 15 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1l-150400.7.31.2.ppc64le as component of SUSE Linux Enterprise Module for Basesystem 15 SP4",
          "product_id": "SUSE Linux Enterprise Module for Basesystem 15 SP4:openssl-1_1-1.1.1l-150400.7.31.2.ppc64le"
        },
        "product_reference": "openssl-1_1-1.1.1l-150400.7.31.2.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Basesystem 15 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1l-150400.7.31.2.s390x as component of SUSE Linux Enterprise Module for Basesystem 15 SP4",
          "product_id": "SUSE Linux Enterprise Module for Basesystem 15 SP4:openssl-1_1-1.1.1l-150400.7.31.2.s390x"
        },
        "product_reference": "openssl-1_1-1.1.1l-150400.7.31.2.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Basesystem 15 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1l-150400.7.31.2.x86_64 as component of SUSE Linux Enterprise Module for Basesystem 15 SP4",
          "product_id": "SUSE Linux Enterprise Module for Basesystem 15 SP4:openssl-1_1-1.1.1l-150400.7.31.2.x86_64"
        },
        "product_reference": "openssl-1_1-1.1.1l-150400.7.31.2.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Basesystem 15 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1l-150400.7.31.2.aarch64 as component of openSUSE Leap Micro 5.3",
          "product_id": "openSUSE Leap Micro 5.3:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.aarch64"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1l-150400.7.31.2.aarch64",
        "relates_to_product_reference": "openSUSE Leap Micro 5.3"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1l-150400.7.31.2.x86_64 as component of openSUSE Leap Micro 5.3",
          "product_id": "openSUSE Leap Micro 5.3:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.x86_64"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1l-150400.7.31.2.x86_64",
        "relates_to_product_reference": "openSUSE Leap Micro 5.3"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1l-150400.7.31.2.aarch64 as component of openSUSE Leap Micro 5.3",
          "product_id": "openSUSE Leap Micro 5.3:libopenssl1_1-1.1.1l-150400.7.31.2.aarch64"
        },
        "product_reference": "libopenssl1_1-1.1.1l-150400.7.31.2.aarch64",
        "relates_to_product_reference": "openSUSE Leap Micro 5.3"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1l-150400.7.31.2.x86_64 as component of openSUSE Leap Micro 5.3",
          "product_id": "openSUSE Leap Micro 5.3:libopenssl1_1-1.1.1l-150400.7.31.2.x86_64"
        },
        "product_reference": "libopenssl1_1-1.1.1l-150400.7.31.2.x86_64",
        "relates_to_product_reference": "openSUSE Leap Micro 5.3"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1l-150400.7.31.2.aarch64 as component of openSUSE Leap Micro 5.3",
          "product_id": "openSUSE Leap Micro 5.3:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.aarch64"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1l-150400.7.31.2.aarch64",
        "relates_to_product_reference": "openSUSE Leap Micro 5.3"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1l-150400.7.31.2.x86_64 as component of openSUSE Leap Micro 5.3",
          "product_id": "openSUSE Leap Micro 5.3:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1l-150400.7.31.2.x86_64",
        "relates_to_product_reference": "openSUSE Leap Micro 5.3"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1l-150400.7.31.2.aarch64 as component of openSUSE Leap Micro 5.3",
          "product_id": "openSUSE Leap Micro 5.3:openssl-1_1-1.1.1l-150400.7.31.2.aarch64"
        },
        "product_reference": "openssl-1_1-1.1.1l-150400.7.31.2.aarch64",
        "relates_to_product_reference": "openSUSE Leap Micro 5.3"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1l-150400.7.31.2.x86_64 as component of openSUSE Leap Micro 5.3",
          "product_id": "openSUSE Leap Micro 5.3:openssl-1_1-1.1.1l-150400.7.31.2.x86_64"
        },
        "product_reference": "openssl-1_1-1.1.1l-150400.7.31.2.x86_64",
        "relates_to_product_reference": "openSUSE Leap Micro 5.3"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1l-150400.7.31.2.aarch64 as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.aarch64"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1l-150400.7.31.2.aarch64",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1l-150400.7.31.2.ppc64le as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.ppc64le"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1l-150400.7.31.2.ppc64le",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1l-150400.7.31.2.s390x as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.s390x"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1l-150400.7.31.2.s390x",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-1.1.1l-150400.7.31.2.x86_64 as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.x86_64"
        },
        "product_reference": "libopenssl-1_1-devel-1.1.1l-150400.7.31.2.x86_64",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-1_1-devel-32bit-1.1.1l-150400.7.31.2.x86_64 as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:libopenssl-1_1-devel-32bit-1.1.1l-150400.7.31.2.x86_64"
        },
        "product_reference": "libopenssl-1_1-devel-32bit-1.1.1l-150400.7.31.2.x86_64",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1l-150400.7.31.2.aarch64 as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:libopenssl1_1-1.1.1l-150400.7.31.2.aarch64"
        },
        "product_reference": "libopenssl1_1-1.1.1l-150400.7.31.2.aarch64",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1l-150400.7.31.2.ppc64le as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:libopenssl1_1-1.1.1l-150400.7.31.2.ppc64le"
        },
        "product_reference": "libopenssl1_1-1.1.1l-150400.7.31.2.ppc64le",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1l-150400.7.31.2.s390x as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:libopenssl1_1-1.1.1l-150400.7.31.2.s390x"
        },
        "product_reference": "libopenssl1_1-1.1.1l-150400.7.31.2.s390x",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-1.1.1l-150400.7.31.2.x86_64 as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:libopenssl1_1-1.1.1l-150400.7.31.2.x86_64"
        },
        "product_reference": "libopenssl1_1-1.1.1l-150400.7.31.2.x86_64",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-32bit-1.1.1l-150400.7.31.2.x86_64 as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:libopenssl1_1-32bit-1.1.1l-150400.7.31.2.x86_64"
        },
        "product_reference": "libopenssl1_1-32bit-1.1.1l-150400.7.31.2.x86_64",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1l-150400.7.31.2.aarch64 as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.aarch64"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1l-150400.7.31.2.aarch64",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1l-150400.7.31.2.ppc64le as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.ppc64le"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1l-150400.7.31.2.ppc64le",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1l-150400.7.31.2.s390x as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.s390x"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1l-150400.7.31.2.s390x",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-1.1.1l-150400.7.31.2.x86_64 as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-1.1.1l-150400.7.31.2.x86_64",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl1_1-hmac-32bit-1.1.1l-150400.7.31.2.x86_64 as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:libopenssl1_1-hmac-32bit-1.1.1l-150400.7.31.2.x86_64"
        },
        "product_reference": "libopenssl1_1-hmac-32bit-1.1.1l-150400.7.31.2.x86_64",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1l-150400.7.31.2.aarch64 as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:openssl-1_1-1.1.1l-150400.7.31.2.aarch64"
        },
        "product_reference": "openssl-1_1-1.1.1l-150400.7.31.2.aarch64",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1l-150400.7.31.2.ppc64le as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:openssl-1_1-1.1.1l-150400.7.31.2.ppc64le"
        },
        "product_reference": "openssl-1_1-1.1.1l-150400.7.31.2.ppc64le",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1l-150400.7.31.2.s390x as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:openssl-1_1-1.1.1l-150400.7.31.2.s390x"
        },
        "product_reference": "openssl-1_1-1.1.1l-150400.7.31.2.s390x",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-1.1.1l-150400.7.31.2.x86_64 as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:openssl-1_1-1.1.1l-150400.7.31.2.x86_64"
        },
        "product_reference": "openssl-1_1-1.1.1l-150400.7.31.2.x86_64",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-1_1-doc-1.1.1l-150400.7.31.2.noarch as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:openssl-1_1-doc-1.1.1l-150400.7.31.2.noarch"
        },
        "product_reference": "openssl-1_1-doc-1.1.1l-150400.7.31.2.noarch",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2023-0464",
      "ids": [
        {
          "system_name": "SUSE CVE Page",
          "text": "https://www.suse.com/security/cve/CVE-2023-0464"
        }
      ],
      "notes": [
        {
          "category": "general",
          "text": "A security vulnerability has been identified in all supported versions\n\nof OpenSSL related to the verification of X.509 certificate chains\nthat include policy constraints.  Attackers may be able to exploit this\nvulnerability by creating a malicious certificate chain that triggers\nexponential use of computational resources, leading to a denial-of-service\n(DoS) attack on affected systems.\n\nPolicy processing is disabled by default but can be enabled by passing\nthe `-policy\u0027 argument to the command line utilities or by calling the\n`X509_VERIFY_PARAM_set1_policies()\u0027 function.",
          "title": "CVE description"
        }
      ],
      "product_status": {
        "recommended": [
          "SUSE Linux Enterprise Micro 5.3:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.aarch64",
          "SUSE Linux Enterprise Micro 5.3:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.s390x",
          "SUSE Linux Enterprise Micro 5.3:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.x86_64",
          "SUSE Linux Enterprise Micro 5.3:libopenssl1_1-1.1.1l-150400.7.31.2.aarch64",
          "SUSE Linux Enterprise Micro 5.3:libopenssl1_1-1.1.1l-150400.7.31.2.s390x",
          "SUSE Linux Enterprise Micro 5.3:libopenssl1_1-1.1.1l-150400.7.31.2.x86_64",
          "SUSE Linux Enterprise Micro 5.3:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.aarch64",
          "SUSE Linux Enterprise Micro 5.3:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.s390x",
          "SUSE Linux Enterprise Micro 5.3:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.x86_64",
          "SUSE Linux Enterprise Micro 5.3:openssl-1_1-1.1.1l-150400.7.31.2.aarch64",
          "SUSE Linux Enterprise Micro 5.3:openssl-1_1-1.1.1l-150400.7.31.2.s390x",
          "SUSE Linux Enterprise Micro 5.3:openssl-1_1-1.1.1l-150400.7.31.2.x86_64",
          "SUSE Linux Enterprise Micro 5.4:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.aarch64",
          "SUSE Linux Enterprise Micro 5.4:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.s390x",
          "SUSE Linux Enterprise Micro 5.4:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.x86_64",
          "SUSE Linux Enterprise Micro 5.4:libopenssl1_1-1.1.1l-150400.7.31.2.aarch64",
          "SUSE Linux Enterprise Micro 5.4:libopenssl1_1-1.1.1l-150400.7.31.2.s390x",
          "SUSE Linux Enterprise Micro 5.4:libopenssl1_1-1.1.1l-150400.7.31.2.x86_64",
          "SUSE Linux Enterprise Micro 5.4:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.aarch64",
          "SUSE Linux Enterprise Micro 5.4:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.s390x",
          "SUSE Linux Enterprise Micro 5.4:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.x86_64",
          "SUSE Linux Enterprise Micro 5.4:openssl-1_1-1.1.1l-150400.7.31.2.aarch64",
          "SUSE Linux Enterprise Micro 5.4:openssl-1_1-1.1.1l-150400.7.31.2.s390x",
          "SUSE Linux Enterprise Micro 5.4:openssl-1_1-1.1.1l-150400.7.31.2.x86_64",
          "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.aarch64",
          "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.ppc64le",
          "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.s390x",
          "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.x86_64",
          "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl-1_1-devel-32bit-1.1.1l-150400.7.31.2.x86_64",
          "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl1_1-1.1.1l-150400.7.31.2.aarch64",
          "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl1_1-1.1.1l-150400.7.31.2.ppc64le",
          "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl1_1-1.1.1l-150400.7.31.2.s390x",
          "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl1_1-1.1.1l-150400.7.31.2.x86_64",
          "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl1_1-32bit-1.1.1l-150400.7.31.2.x86_64",
          "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.aarch64",
          "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.ppc64le",
          "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.s390x",
          "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.x86_64",
          "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl1_1-hmac-32bit-1.1.1l-150400.7.31.2.x86_64",
          "SUSE Linux Enterprise Module for Basesystem 15 SP4:openssl-1_1-1.1.1l-150400.7.31.2.aarch64",
          "SUSE Linux Enterprise Module for Basesystem 15 SP4:openssl-1_1-1.1.1l-150400.7.31.2.ppc64le",
          "SUSE Linux Enterprise Module for Basesystem 15 SP4:openssl-1_1-1.1.1l-150400.7.31.2.s390x",
          "SUSE Linux Enterprise Module for Basesystem 15 SP4:openssl-1_1-1.1.1l-150400.7.31.2.x86_64",
          "openSUSE Leap 15.4:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.aarch64",
          "openSUSE Leap 15.4:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.ppc64le",
          "openSUSE Leap 15.4:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.s390x",
          "openSUSE Leap 15.4:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.x86_64",
          "openSUSE Leap 15.4:libopenssl-1_1-devel-32bit-1.1.1l-150400.7.31.2.x86_64",
          "openSUSE Leap 15.4:libopenssl1_1-1.1.1l-150400.7.31.2.aarch64",
          "openSUSE Leap 15.4:libopenssl1_1-1.1.1l-150400.7.31.2.ppc64le",
          "openSUSE Leap 15.4:libopenssl1_1-1.1.1l-150400.7.31.2.s390x",
          "openSUSE Leap 15.4:libopenssl1_1-1.1.1l-150400.7.31.2.x86_64",
          "openSUSE Leap 15.4:libopenssl1_1-32bit-1.1.1l-150400.7.31.2.x86_64",
          "openSUSE Leap 15.4:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.aarch64",
          "openSUSE Leap 15.4:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.ppc64le",
          "openSUSE Leap 15.4:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.s390x",
          "openSUSE Leap 15.4:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.x86_64",
          "openSUSE Leap 15.4:libopenssl1_1-hmac-32bit-1.1.1l-150400.7.31.2.x86_64",
          "openSUSE Leap 15.4:openssl-1_1-1.1.1l-150400.7.31.2.aarch64",
          "openSUSE Leap 15.4:openssl-1_1-1.1.1l-150400.7.31.2.ppc64le",
          "openSUSE Leap 15.4:openssl-1_1-1.1.1l-150400.7.31.2.s390x",
          "openSUSE Leap 15.4:openssl-1_1-1.1.1l-150400.7.31.2.x86_64",
          "openSUSE Leap 15.4:openssl-1_1-doc-1.1.1l-150400.7.31.2.noarch",
          "openSUSE Leap Micro 5.3:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.aarch64",
          "openSUSE Leap Micro 5.3:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.x86_64",
          "openSUSE Leap Micro 5.3:libopenssl1_1-1.1.1l-150400.7.31.2.aarch64",
          "openSUSE Leap Micro 5.3:libopenssl1_1-1.1.1l-150400.7.31.2.x86_64",
          "openSUSE Leap Micro 5.3:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.aarch64",
          "openSUSE Leap Micro 5.3:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.x86_64",
          "openSUSE Leap Micro 5.3:openssl-1_1-1.1.1l-150400.7.31.2.aarch64",
          "openSUSE Leap Micro 5.3:openssl-1_1-1.1.1l-150400.7.31.2.x86_64"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "CVE-2023-0464",
          "url": "https://www.suse.com/security/cve/CVE-2023-0464"
        },
        {
          "category": "external",
          "summary": "SUSE Bug 1209624 for CVE-2023-0464",
          "url": "https://bugzilla.suse.com/1209624"
        },
        {
          "category": "external",
          "summary": "SUSE Bug 1225628 for CVE-2023-0464",
          "url": "https://bugzilla.suse.com/1225628"
        }
      ],
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or \"zypper patch\".\n",
          "product_ids": [
            "SUSE Linux Enterprise Micro 5.3:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.aarch64",
            "SUSE Linux Enterprise Micro 5.3:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.s390x",
            "SUSE Linux Enterprise Micro 5.3:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.x86_64",
            "SUSE Linux Enterprise Micro 5.3:libopenssl1_1-1.1.1l-150400.7.31.2.aarch64",
            "SUSE Linux Enterprise Micro 5.3:libopenssl1_1-1.1.1l-150400.7.31.2.s390x",
            "SUSE Linux Enterprise Micro 5.3:libopenssl1_1-1.1.1l-150400.7.31.2.x86_64",
            "SUSE Linux Enterprise Micro 5.3:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.aarch64",
            "SUSE Linux Enterprise Micro 5.3:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.s390x",
            "SUSE Linux Enterprise Micro 5.3:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.x86_64",
            "SUSE Linux Enterprise Micro 5.3:openssl-1_1-1.1.1l-150400.7.31.2.aarch64",
            "SUSE Linux Enterprise Micro 5.3:openssl-1_1-1.1.1l-150400.7.31.2.s390x",
            "SUSE Linux Enterprise Micro 5.3:openssl-1_1-1.1.1l-150400.7.31.2.x86_64",
            "SUSE Linux Enterprise Micro 5.4:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.aarch64",
            "SUSE Linux Enterprise Micro 5.4:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.s390x",
            "SUSE Linux Enterprise Micro 5.4:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.x86_64",
            "SUSE Linux Enterprise Micro 5.4:libopenssl1_1-1.1.1l-150400.7.31.2.aarch64",
            "SUSE Linux Enterprise Micro 5.4:libopenssl1_1-1.1.1l-150400.7.31.2.s390x",
            "SUSE Linux Enterprise Micro 5.4:libopenssl1_1-1.1.1l-150400.7.31.2.x86_64",
            "SUSE Linux Enterprise Micro 5.4:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.aarch64",
            "SUSE Linux Enterprise Micro 5.4:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.s390x",
            "SUSE Linux Enterprise Micro 5.4:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.x86_64",
            "SUSE Linux Enterprise Micro 5.4:openssl-1_1-1.1.1l-150400.7.31.2.aarch64",
            "SUSE Linux Enterprise Micro 5.4:openssl-1_1-1.1.1l-150400.7.31.2.s390x",
            "SUSE Linux Enterprise Micro 5.4:openssl-1_1-1.1.1l-150400.7.31.2.x86_64",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.aarch64",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.ppc64le",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.s390x",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.x86_64",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl-1_1-devel-32bit-1.1.1l-150400.7.31.2.x86_64",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl1_1-1.1.1l-150400.7.31.2.aarch64",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl1_1-1.1.1l-150400.7.31.2.ppc64le",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl1_1-1.1.1l-150400.7.31.2.s390x",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl1_1-1.1.1l-150400.7.31.2.x86_64",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl1_1-32bit-1.1.1l-150400.7.31.2.x86_64",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.aarch64",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.ppc64le",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.s390x",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.x86_64",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl1_1-hmac-32bit-1.1.1l-150400.7.31.2.x86_64",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:openssl-1_1-1.1.1l-150400.7.31.2.aarch64",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:openssl-1_1-1.1.1l-150400.7.31.2.ppc64le",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:openssl-1_1-1.1.1l-150400.7.31.2.s390x",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:openssl-1_1-1.1.1l-150400.7.31.2.x86_64",
            "openSUSE Leap 15.4:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.aarch64",
            "openSUSE Leap 15.4:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.ppc64le",
            "openSUSE Leap 15.4:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.s390x",
            "openSUSE Leap 15.4:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.x86_64",
            "openSUSE Leap 15.4:libopenssl-1_1-devel-32bit-1.1.1l-150400.7.31.2.x86_64",
            "openSUSE Leap 15.4:libopenssl1_1-1.1.1l-150400.7.31.2.aarch64",
            "openSUSE Leap 15.4:libopenssl1_1-1.1.1l-150400.7.31.2.ppc64le",
            "openSUSE Leap 15.4:libopenssl1_1-1.1.1l-150400.7.31.2.s390x",
            "openSUSE Leap 15.4:libopenssl1_1-1.1.1l-150400.7.31.2.x86_64",
            "openSUSE Leap 15.4:libopenssl1_1-32bit-1.1.1l-150400.7.31.2.x86_64",
            "openSUSE Leap 15.4:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.aarch64",
            "openSUSE Leap 15.4:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.ppc64le",
            "openSUSE Leap 15.4:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.s390x",
            "openSUSE Leap 15.4:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.x86_64",
            "openSUSE Leap 15.4:libopenssl1_1-hmac-32bit-1.1.1l-150400.7.31.2.x86_64",
            "openSUSE Leap 15.4:openssl-1_1-1.1.1l-150400.7.31.2.aarch64",
            "openSUSE Leap 15.4:openssl-1_1-1.1.1l-150400.7.31.2.ppc64le",
            "openSUSE Leap 15.4:openssl-1_1-1.1.1l-150400.7.31.2.s390x",
            "openSUSE Leap 15.4:openssl-1_1-1.1.1l-150400.7.31.2.x86_64",
            "openSUSE Leap 15.4:openssl-1_1-doc-1.1.1l-150400.7.31.2.noarch",
            "openSUSE Leap Micro 5.3:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.aarch64",
            "openSUSE Leap Micro 5.3:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.x86_64",
            "openSUSE Leap Micro 5.3:libopenssl1_1-1.1.1l-150400.7.31.2.aarch64",
            "openSUSE Leap Micro 5.3:libopenssl1_1-1.1.1l-150400.7.31.2.x86_64",
            "openSUSE Leap Micro 5.3:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.aarch64",
            "openSUSE Leap Micro 5.3:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.x86_64",
            "openSUSE Leap Micro 5.3:openssl-1_1-1.1.1l-150400.7.31.2.aarch64",
            "openSUSE Leap Micro 5.3:openssl-1_1-1.1.1l-150400.7.31.2.x86_64"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "SUSE Linux Enterprise Micro 5.3:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.aarch64",
            "SUSE Linux Enterprise Micro 5.3:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.s390x",
            "SUSE Linux Enterprise Micro 5.3:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.x86_64",
            "SUSE Linux Enterprise Micro 5.3:libopenssl1_1-1.1.1l-150400.7.31.2.aarch64",
            "SUSE Linux Enterprise Micro 5.3:libopenssl1_1-1.1.1l-150400.7.31.2.s390x",
            "SUSE Linux Enterprise Micro 5.3:libopenssl1_1-1.1.1l-150400.7.31.2.x86_64",
            "SUSE Linux Enterprise Micro 5.3:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.aarch64",
            "SUSE Linux Enterprise Micro 5.3:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.s390x",
            "SUSE Linux Enterprise Micro 5.3:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.x86_64",
            "SUSE Linux Enterprise Micro 5.3:openssl-1_1-1.1.1l-150400.7.31.2.aarch64",
            "SUSE Linux Enterprise Micro 5.3:openssl-1_1-1.1.1l-150400.7.31.2.s390x",
            "SUSE Linux Enterprise Micro 5.3:openssl-1_1-1.1.1l-150400.7.31.2.x86_64",
            "SUSE Linux Enterprise Micro 5.4:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.aarch64",
            "SUSE Linux Enterprise Micro 5.4:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.s390x",
            "SUSE Linux Enterprise Micro 5.4:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.x86_64",
            "SUSE Linux Enterprise Micro 5.4:libopenssl1_1-1.1.1l-150400.7.31.2.aarch64",
            "SUSE Linux Enterprise Micro 5.4:libopenssl1_1-1.1.1l-150400.7.31.2.s390x",
            "SUSE Linux Enterprise Micro 5.4:libopenssl1_1-1.1.1l-150400.7.31.2.x86_64",
            "SUSE Linux Enterprise Micro 5.4:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.aarch64",
            "SUSE Linux Enterprise Micro 5.4:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.s390x",
            "SUSE Linux Enterprise Micro 5.4:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.x86_64",
            "SUSE Linux Enterprise Micro 5.4:openssl-1_1-1.1.1l-150400.7.31.2.aarch64",
            "SUSE Linux Enterprise Micro 5.4:openssl-1_1-1.1.1l-150400.7.31.2.s390x",
            "SUSE Linux Enterprise Micro 5.4:openssl-1_1-1.1.1l-150400.7.31.2.x86_64",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.aarch64",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.ppc64le",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.s390x",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.x86_64",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl-1_1-devel-32bit-1.1.1l-150400.7.31.2.x86_64",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl1_1-1.1.1l-150400.7.31.2.aarch64",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl1_1-1.1.1l-150400.7.31.2.ppc64le",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl1_1-1.1.1l-150400.7.31.2.s390x",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl1_1-1.1.1l-150400.7.31.2.x86_64",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl1_1-32bit-1.1.1l-150400.7.31.2.x86_64",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.aarch64",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.ppc64le",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.s390x",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.x86_64",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl1_1-hmac-32bit-1.1.1l-150400.7.31.2.x86_64",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:openssl-1_1-1.1.1l-150400.7.31.2.aarch64",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:openssl-1_1-1.1.1l-150400.7.31.2.ppc64le",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:openssl-1_1-1.1.1l-150400.7.31.2.s390x",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:openssl-1_1-1.1.1l-150400.7.31.2.x86_64",
            "openSUSE Leap 15.4:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.aarch64",
            "openSUSE Leap 15.4:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.ppc64le",
            "openSUSE Leap 15.4:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.s390x",
            "openSUSE Leap 15.4:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.x86_64",
            "openSUSE Leap 15.4:libopenssl-1_1-devel-32bit-1.1.1l-150400.7.31.2.x86_64",
            "openSUSE Leap 15.4:libopenssl1_1-1.1.1l-150400.7.31.2.aarch64",
            "openSUSE Leap 15.4:libopenssl1_1-1.1.1l-150400.7.31.2.ppc64le",
            "openSUSE Leap 15.4:libopenssl1_1-1.1.1l-150400.7.31.2.s390x",
            "openSUSE Leap 15.4:libopenssl1_1-1.1.1l-150400.7.31.2.x86_64",
            "openSUSE Leap 15.4:libopenssl1_1-32bit-1.1.1l-150400.7.31.2.x86_64",
            "openSUSE Leap 15.4:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.aarch64",
            "openSUSE Leap 15.4:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.ppc64le",
            "openSUSE Leap 15.4:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.s390x",
            "openSUSE Leap 15.4:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.x86_64",
            "openSUSE Leap 15.4:libopenssl1_1-hmac-32bit-1.1.1l-150400.7.31.2.x86_64",
            "openSUSE Leap 15.4:openssl-1_1-1.1.1l-150400.7.31.2.aarch64",
            "openSUSE Leap 15.4:openssl-1_1-1.1.1l-150400.7.31.2.ppc64le",
            "openSUSE Leap 15.4:openssl-1_1-1.1.1l-150400.7.31.2.s390x",
            "openSUSE Leap 15.4:openssl-1_1-1.1.1l-150400.7.31.2.x86_64",
            "openSUSE Leap 15.4:openssl-1_1-doc-1.1.1l-150400.7.31.2.noarch",
            "openSUSE Leap Micro 5.3:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.aarch64",
            "openSUSE Leap Micro 5.3:libopenssl-1_1-devel-1.1.1l-150400.7.31.2.x86_64",
            "openSUSE Leap Micro 5.3:libopenssl1_1-1.1.1l-150400.7.31.2.aarch64",
            "openSUSE Leap Micro 5.3:libopenssl1_1-1.1.1l-150400.7.31.2.x86_64",
            "openSUSE Leap Micro 5.3:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.aarch64",
            "openSUSE Leap Micro 5.3:libopenssl1_1-hmac-1.1.1l-150400.7.31.2.x86_64",
            "openSUSE Leap Micro 5.3:openssl-1_1-1.1.1l-150400.7.31.2.aarch64",
            "openSUSE Leap Micro 5.3:openssl-1_1-1.1.1l-150400.7.31.2.x86_64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "date": "2023-04-04T07:05:33Z",
          "details": "moderate"
        }
      ],
      "title": "CVE-2023-0464"
    }
  ]
}

{
  "document": {
    "aggregate_severity": {
      "namespace": "https://www.suse.com/support/security/rating/",
      "text": "moderate"
    },
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Copyright 2024 SUSE LLC. All rights reserved.",
      "tlp": {
        "label": "WHITE",
        "url": "https://www.first.org/tlp/"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "Security update for openssl-3",
        "title": "Title of the patch"
      },
      {
        "category": "description",
        "text": "This update for openssl-3 fixes the following issues:\n\n- CVE-2023-0464: Fixed excessive Resource Usage Verifying X.509 Policy Constraints (bsc#1209624).\n",
        "title": "Description of the patch"
      },
      {
        "category": "details",
        "text": "SUSE-2023-1746,SUSE-SLE-Module-Basesystem-15-SP4-2023-1746,openSUSE-SLE-15.4-2023-1746",
        "title": "Patchnames"
      },
      {
        "category": "legal_disclaimer",
        "text": "CSAF 2.0 data is provided by SUSE under the Creative Commons License 4.0 with Attribution (CC-BY-4.0).",
        "title": "Terms of use"
      }
    ],
    "publisher": {
      "category": "vendor",
      "contact_details": "https://www.suse.com/support/security/contact/",
      "name": "SUSE Product Security Team",
      "namespace": "https://www.suse.com/"
    },
    "references": [
      {
        "category": "external",
        "summary": "SUSE ratings",
        "url": "https://www.suse.com/support/security/rating/"
      },
      {
        "category": "self",
        "summary": "URL of this CSAF notice",
        "url": "https://ftp.suse.com/pub/projects/security/csaf/suse-su-2023_1746-1.json"
      },
      {
        "category": "self",
        "summary": "URL for SUSE-SU-2023:1746-1",
        "url": "https://www.suse.com/support/update/announcement/2023/suse-su-20231746-1/"
      },
      {
        "category": "self",
        "summary": "E-Mail link for SUSE-SU-2023:1746-1",
        "url": "https://lists.suse.com/pipermail/sle-updates/2023-April/028608.html"
      },
      {
        "category": "self",
        "summary": "SUSE Bug 1209624",
        "url": "https://bugzilla.suse.com/1209624"
      },
      {
        "category": "self",
        "summary": "SUSE CVE CVE-2023-0464 page",
        "url": "https://www.suse.com/security/cve/CVE-2023-0464/"
      }
    ],
    "title": "Security update for openssl-3",
    "tracking": {
      "current_release_date": "2023-04-04T07:06:03Z",
      "generator": {
        "date": "2023-04-04T07:06:03Z",
        "engine": {
          "name": "cve-database.git:bin/generate-csaf.pl",
          "version": "1"
        }
      },
      "id": "SUSE-SU-2023:1746-1",
      "initial_release_date": "2023-04-04T07:06:03Z",
      "revision_history": [
        {
          "date": "2023-04-04T07:06:03Z",
          "number": "1",
          "summary": "Current version"
        }
      ],
      "status": "final",
      "version": "1"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-3-devel-3.0.1-150400.4.20.1.aarch64",
                "product": {
                  "name": "libopenssl-3-devel-3.0.1-150400.4.20.1.aarch64",
                  "product_id": "libopenssl-3-devel-3.0.1-150400.4.20.1.aarch64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl3-3.0.1-150400.4.20.1.aarch64",
                "product": {
                  "name": "libopenssl3-3.0.1-150400.4.20.1.aarch64",
                  "product_id": "libopenssl3-3.0.1-150400.4.20.1.aarch64"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-3-3.0.1-150400.4.20.1.aarch64",
                "product": {
                  "name": "openssl-3-3.0.1-150400.4.20.1.aarch64",
                  "product_id": "openssl-3-3.0.1-150400.4.20.1.aarch64"
                }
              }
            ],
            "category": "architecture",
            "name": "aarch64"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-3-devel-64bit-3.0.1-150400.4.20.1.aarch64_ilp32",
                "product": {
                  "name": "libopenssl-3-devel-64bit-3.0.1-150400.4.20.1.aarch64_ilp32",
                  "product_id": "libopenssl-3-devel-64bit-3.0.1-150400.4.20.1.aarch64_ilp32"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl3-64bit-3.0.1-150400.4.20.1.aarch64_ilp32",
                "product": {
                  "name": "libopenssl3-64bit-3.0.1-150400.4.20.1.aarch64_ilp32",
                  "product_id": "libopenssl3-64bit-3.0.1-150400.4.20.1.aarch64_ilp32"
                }
              }
            ],
            "category": "architecture",
            "name": "aarch64_ilp32"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-3-devel-3.0.1-150400.4.20.1.i586",
                "product": {
                  "name": "libopenssl-3-devel-3.0.1-150400.4.20.1.i586",
                  "product_id": "libopenssl-3-devel-3.0.1-150400.4.20.1.i586"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl3-3.0.1-150400.4.20.1.i586",
                "product": {
                  "name": "libopenssl3-3.0.1-150400.4.20.1.i586",
                  "product_id": "libopenssl3-3.0.1-150400.4.20.1.i586"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-3-3.0.1-150400.4.20.1.i586",
                "product": {
                  "name": "openssl-3-3.0.1-150400.4.20.1.i586",
                  "product_id": "openssl-3-3.0.1-150400.4.20.1.i586"
                }
              }
            ],
            "category": "architecture",
            "name": "i586"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "openssl-3-doc-3.0.1-150400.4.20.1.noarch",
                "product": {
                  "name": "openssl-3-doc-3.0.1-150400.4.20.1.noarch",
                  "product_id": "openssl-3-doc-3.0.1-150400.4.20.1.noarch"
                }
              }
            ],
            "category": "architecture",
            "name": "noarch"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-3-devel-3.0.1-150400.4.20.1.ppc64le",
                "product": {
                  "name": "libopenssl-3-devel-3.0.1-150400.4.20.1.ppc64le",
                  "product_id": "libopenssl-3-devel-3.0.1-150400.4.20.1.ppc64le"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl3-3.0.1-150400.4.20.1.ppc64le",
                "product": {
                  "name": "libopenssl3-3.0.1-150400.4.20.1.ppc64le",
                  "product_id": "libopenssl3-3.0.1-150400.4.20.1.ppc64le"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-3-3.0.1-150400.4.20.1.ppc64le",
                "product": {
                  "name": "openssl-3-3.0.1-150400.4.20.1.ppc64le",
                  "product_id": "openssl-3-3.0.1-150400.4.20.1.ppc64le"
                }
              }
            ],
            "category": "architecture",
            "name": "ppc64le"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-3-devel-3.0.1-150400.4.20.1.s390x",
                "product": {
                  "name": "libopenssl-3-devel-3.0.1-150400.4.20.1.s390x",
                  "product_id": "libopenssl-3-devel-3.0.1-150400.4.20.1.s390x"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl3-3.0.1-150400.4.20.1.s390x",
                "product": {
                  "name": "libopenssl3-3.0.1-150400.4.20.1.s390x",
                  "product_id": "libopenssl3-3.0.1-150400.4.20.1.s390x"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-3-3.0.1-150400.4.20.1.s390x",
                "product": {
                  "name": "openssl-3-3.0.1-150400.4.20.1.s390x",
                  "product_id": "openssl-3-3.0.1-150400.4.20.1.s390x"
                }
              }
            ],
            "category": "architecture",
            "name": "s390x"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl-3-devel-3.0.1-150400.4.20.1.x86_64",
                "product": {
                  "name": "libopenssl-3-devel-3.0.1-150400.4.20.1.x86_64",
                  "product_id": "libopenssl-3-devel-3.0.1-150400.4.20.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl-3-devel-32bit-3.0.1-150400.4.20.1.x86_64",
                "product": {
                  "name": "libopenssl-3-devel-32bit-3.0.1-150400.4.20.1.x86_64",
                  "product_id": "libopenssl-3-devel-32bit-3.0.1-150400.4.20.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl3-3.0.1-150400.4.20.1.x86_64",
                "product": {
                  "name": "libopenssl3-3.0.1-150400.4.20.1.x86_64",
                  "product_id": "libopenssl3-3.0.1-150400.4.20.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl3-32bit-3.0.1-150400.4.20.1.x86_64",
                "product": {
                  "name": "libopenssl3-32bit-3.0.1-150400.4.20.1.x86_64",
                  "product_id": "libopenssl3-32bit-3.0.1-150400.4.20.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "openssl-3-3.0.1-150400.4.20.1.x86_64",
                "product": {
                  "name": "openssl-3-3.0.1-150400.4.20.1.x86_64",
                  "product_id": "openssl-3-3.0.1-150400.4.20.1.x86_64"
                }
              }
            ],
            "category": "architecture",
            "name": "x86_64"
          },
          {
            "branches": [
              {
                "category": "product_name",
                "name": "SUSE Linux Enterprise Module for Basesystem 15 SP4",
                "product": {
                  "name": "SUSE Linux Enterprise Module for Basesystem 15 SP4",
                  "product_id": "SUSE Linux Enterprise Module for Basesystem 15 SP4",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:sle-module-basesystem:15:sp4"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "openSUSE Leap 15.4",
                "product": {
                  "name": "openSUSE Leap 15.4",
                  "product_id": "openSUSE Leap 15.4",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:opensuse:leap:15.4"
                  }
                }
              }
            ],
            "category": "product_family",
            "name": "SUSE Linux Enterprise"
          }
        ],
        "category": "vendor",
        "name": "SUSE"
      }
    ],
    "relationships": [
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-3-devel-3.0.1-150400.4.20.1.aarch64 as component of SUSE Linux Enterprise Module for Basesystem 15 SP4",
          "product_id": "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl-3-devel-3.0.1-150400.4.20.1.aarch64"
        },
        "product_reference": "libopenssl-3-devel-3.0.1-150400.4.20.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Basesystem 15 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-3-devel-3.0.1-150400.4.20.1.ppc64le as component of SUSE Linux Enterprise Module for Basesystem 15 SP4",
          "product_id": "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl-3-devel-3.0.1-150400.4.20.1.ppc64le"
        },
        "product_reference": "libopenssl-3-devel-3.0.1-150400.4.20.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Basesystem 15 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-3-devel-3.0.1-150400.4.20.1.s390x as component of SUSE Linux Enterprise Module for Basesystem 15 SP4",
          "product_id": "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl-3-devel-3.0.1-150400.4.20.1.s390x"
        },
        "product_reference": "libopenssl-3-devel-3.0.1-150400.4.20.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Basesystem 15 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-3-devel-3.0.1-150400.4.20.1.x86_64 as component of SUSE Linux Enterprise Module for Basesystem 15 SP4",
          "product_id": "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl-3-devel-3.0.1-150400.4.20.1.x86_64"
        },
        "product_reference": "libopenssl-3-devel-3.0.1-150400.4.20.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Basesystem 15 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl3-3.0.1-150400.4.20.1.aarch64 as component of SUSE Linux Enterprise Module for Basesystem 15 SP4",
          "product_id": "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl3-3.0.1-150400.4.20.1.aarch64"
        },
        "product_reference": "libopenssl3-3.0.1-150400.4.20.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Basesystem 15 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl3-3.0.1-150400.4.20.1.ppc64le as component of SUSE Linux Enterprise Module for Basesystem 15 SP4",
          "product_id": "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl3-3.0.1-150400.4.20.1.ppc64le"
        },
        "product_reference": "libopenssl3-3.0.1-150400.4.20.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Basesystem 15 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl3-3.0.1-150400.4.20.1.s390x as component of SUSE Linux Enterprise Module for Basesystem 15 SP4",
          "product_id": "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl3-3.0.1-150400.4.20.1.s390x"
        },
        "product_reference": "libopenssl3-3.0.1-150400.4.20.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Basesystem 15 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl3-3.0.1-150400.4.20.1.x86_64 as component of SUSE Linux Enterprise Module for Basesystem 15 SP4",
          "product_id": "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl3-3.0.1-150400.4.20.1.x86_64"
        },
        "product_reference": "libopenssl3-3.0.1-150400.4.20.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Basesystem 15 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-3-3.0.1-150400.4.20.1.aarch64 as component of SUSE Linux Enterprise Module for Basesystem 15 SP4",
          "product_id": "SUSE Linux Enterprise Module for Basesystem 15 SP4:openssl-3-3.0.1-150400.4.20.1.aarch64"
        },
        "product_reference": "openssl-3-3.0.1-150400.4.20.1.aarch64",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Basesystem 15 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-3-3.0.1-150400.4.20.1.ppc64le as component of SUSE Linux Enterprise Module for Basesystem 15 SP4",
          "product_id": "SUSE Linux Enterprise Module for Basesystem 15 SP4:openssl-3-3.0.1-150400.4.20.1.ppc64le"
        },
        "product_reference": "openssl-3-3.0.1-150400.4.20.1.ppc64le",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Basesystem 15 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-3-3.0.1-150400.4.20.1.s390x as component of SUSE Linux Enterprise Module for Basesystem 15 SP4",
          "product_id": "SUSE Linux Enterprise Module for Basesystem 15 SP4:openssl-3-3.0.1-150400.4.20.1.s390x"
        },
        "product_reference": "openssl-3-3.0.1-150400.4.20.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Basesystem 15 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-3-3.0.1-150400.4.20.1.x86_64 as component of SUSE Linux Enterprise Module for Basesystem 15 SP4",
          "product_id": "SUSE Linux Enterprise Module for Basesystem 15 SP4:openssl-3-3.0.1-150400.4.20.1.x86_64"
        },
        "product_reference": "openssl-3-3.0.1-150400.4.20.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Basesystem 15 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-3-devel-3.0.1-150400.4.20.1.aarch64 as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:libopenssl-3-devel-3.0.1-150400.4.20.1.aarch64"
        },
        "product_reference": "libopenssl-3-devel-3.0.1-150400.4.20.1.aarch64",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-3-devel-3.0.1-150400.4.20.1.ppc64le as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:libopenssl-3-devel-3.0.1-150400.4.20.1.ppc64le"
        },
        "product_reference": "libopenssl-3-devel-3.0.1-150400.4.20.1.ppc64le",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-3-devel-3.0.1-150400.4.20.1.s390x as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:libopenssl-3-devel-3.0.1-150400.4.20.1.s390x"
        },
        "product_reference": "libopenssl-3-devel-3.0.1-150400.4.20.1.s390x",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-3-devel-3.0.1-150400.4.20.1.x86_64 as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:libopenssl-3-devel-3.0.1-150400.4.20.1.x86_64"
        },
        "product_reference": "libopenssl-3-devel-3.0.1-150400.4.20.1.x86_64",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl-3-devel-32bit-3.0.1-150400.4.20.1.x86_64 as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:libopenssl-3-devel-32bit-3.0.1-150400.4.20.1.x86_64"
        },
        "product_reference": "libopenssl-3-devel-32bit-3.0.1-150400.4.20.1.x86_64",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl3-3.0.1-150400.4.20.1.aarch64 as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:libopenssl3-3.0.1-150400.4.20.1.aarch64"
        },
        "product_reference": "libopenssl3-3.0.1-150400.4.20.1.aarch64",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl3-3.0.1-150400.4.20.1.ppc64le as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:libopenssl3-3.0.1-150400.4.20.1.ppc64le"
        },
        "product_reference": "libopenssl3-3.0.1-150400.4.20.1.ppc64le",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl3-3.0.1-150400.4.20.1.s390x as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:libopenssl3-3.0.1-150400.4.20.1.s390x"
        },
        "product_reference": "libopenssl3-3.0.1-150400.4.20.1.s390x",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl3-3.0.1-150400.4.20.1.x86_64 as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:libopenssl3-3.0.1-150400.4.20.1.x86_64"
        },
        "product_reference": "libopenssl3-3.0.1-150400.4.20.1.x86_64",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl3-32bit-3.0.1-150400.4.20.1.x86_64 as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:libopenssl3-32bit-3.0.1-150400.4.20.1.x86_64"
        },
        "product_reference": "libopenssl3-32bit-3.0.1-150400.4.20.1.x86_64",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-3-3.0.1-150400.4.20.1.aarch64 as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:openssl-3-3.0.1-150400.4.20.1.aarch64"
        },
        "product_reference": "openssl-3-3.0.1-150400.4.20.1.aarch64",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-3-3.0.1-150400.4.20.1.ppc64le as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:openssl-3-3.0.1-150400.4.20.1.ppc64le"
        },
        "product_reference": "openssl-3-3.0.1-150400.4.20.1.ppc64le",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-3-3.0.1-150400.4.20.1.s390x as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:openssl-3-3.0.1-150400.4.20.1.s390x"
        },
        "product_reference": "openssl-3-3.0.1-150400.4.20.1.s390x",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-3-3.0.1-150400.4.20.1.x86_64 as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:openssl-3-3.0.1-150400.4.20.1.x86_64"
        },
        "product_reference": "openssl-3-3.0.1-150400.4.20.1.x86_64",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "openssl-3-doc-3.0.1-150400.4.20.1.noarch as component of openSUSE Leap 15.4",
          "product_id": "openSUSE Leap 15.4:openssl-3-doc-3.0.1-150400.4.20.1.noarch"
        },
        "product_reference": "openssl-3-doc-3.0.1-150400.4.20.1.noarch",
        "relates_to_product_reference": "openSUSE Leap 15.4"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2023-0464",
      "ids": [
        {
          "system_name": "SUSE CVE Page",
          "text": "https://www.suse.com/security/cve/CVE-2023-0464"
        }
      ],
      "notes": [
        {
          "category": "general",
          "text": "A security vulnerability has been identified in all supported versions\n\nof OpenSSL related to the verification of X.509 certificate chains\nthat include policy constraints.  Attackers may be able to exploit this\nvulnerability by creating a malicious certificate chain that triggers\nexponential use of computational resources, leading to a denial-of-service\n(DoS) attack on affected systems.\n\nPolicy processing is disabled by default but can be enabled by passing\nthe `-policy\u0027 argument to the command line utilities or by calling the\n`X509_VERIFY_PARAM_set1_policies()\u0027 function.",
          "title": "CVE description"
        }
      ],
      "product_status": {
        "recommended": [
          "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl-3-devel-3.0.1-150400.4.20.1.aarch64",
          "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl-3-devel-3.0.1-150400.4.20.1.ppc64le",
          "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl-3-devel-3.0.1-150400.4.20.1.s390x",
          "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl-3-devel-3.0.1-150400.4.20.1.x86_64",
          "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl3-3.0.1-150400.4.20.1.aarch64",
          "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl3-3.0.1-150400.4.20.1.ppc64le",
          "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl3-3.0.1-150400.4.20.1.s390x",
          "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl3-3.0.1-150400.4.20.1.x86_64",
          "SUSE Linux Enterprise Module for Basesystem 15 SP4:openssl-3-3.0.1-150400.4.20.1.aarch64",
          "SUSE Linux Enterprise Module for Basesystem 15 SP4:openssl-3-3.0.1-150400.4.20.1.ppc64le",
          "SUSE Linux Enterprise Module for Basesystem 15 SP4:openssl-3-3.0.1-150400.4.20.1.s390x",
          "SUSE Linux Enterprise Module for Basesystem 15 SP4:openssl-3-3.0.1-150400.4.20.1.x86_64",
          "openSUSE Leap 15.4:libopenssl-3-devel-3.0.1-150400.4.20.1.aarch64",
          "openSUSE Leap 15.4:libopenssl-3-devel-3.0.1-150400.4.20.1.ppc64le",
          "openSUSE Leap 15.4:libopenssl-3-devel-3.0.1-150400.4.20.1.s390x",
          "openSUSE Leap 15.4:libopenssl-3-devel-3.0.1-150400.4.20.1.x86_64",
          "openSUSE Leap 15.4:libopenssl-3-devel-32bit-3.0.1-150400.4.20.1.x86_64",
          "openSUSE Leap 15.4:libopenssl3-3.0.1-150400.4.20.1.aarch64",
          "openSUSE Leap 15.4:libopenssl3-3.0.1-150400.4.20.1.ppc64le",
          "openSUSE Leap 15.4:libopenssl3-3.0.1-150400.4.20.1.s390x",
          "openSUSE Leap 15.4:libopenssl3-3.0.1-150400.4.20.1.x86_64",
          "openSUSE Leap 15.4:libopenssl3-32bit-3.0.1-150400.4.20.1.x86_64",
          "openSUSE Leap 15.4:openssl-3-3.0.1-150400.4.20.1.aarch64",
          "openSUSE Leap 15.4:openssl-3-3.0.1-150400.4.20.1.ppc64le",
          "openSUSE Leap 15.4:openssl-3-3.0.1-150400.4.20.1.s390x",
          "openSUSE Leap 15.4:openssl-3-3.0.1-150400.4.20.1.x86_64",
          "openSUSE Leap 15.4:openssl-3-doc-3.0.1-150400.4.20.1.noarch"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "CVE-2023-0464",
          "url": "https://www.suse.com/security/cve/CVE-2023-0464"
        },
        {
          "category": "external",
          "summary": "SUSE Bug 1209624 for CVE-2023-0464",
          "url": "https://bugzilla.suse.com/1209624"
        },
        {
          "category": "external",
          "summary": "SUSE Bug 1225628 for CVE-2023-0464",
          "url": "https://bugzilla.suse.com/1225628"
        }
      ],
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or \"zypper patch\".\n",
          "product_ids": [
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl-3-devel-3.0.1-150400.4.20.1.aarch64",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl-3-devel-3.0.1-150400.4.20.1.ppc64le",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl-3-devel-3.0.1-150400.4.20.1.s390x",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl-3-devel-3.0.1-150400.4.20.1.x86_64",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl3-3.0.1-150400.4.20.1.aarch64",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl3-3.0.1-150400.4.20.1.ppc64le",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl3-3.0.1-150400.4.20.1.s390x",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl3-3.0.1-150400.4.20.1.x86_64",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:openssl-3-3.0.1-150400.4.20.1.aarch64",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:openssl-3-3.0.1-150400.4.20.1.ppc64le",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:openssl-3-3.0.1-150400.4.20.1.s390x",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:openssl-3-3.0.1-150400.4.20.1.x86_64",
            "openSUSE Leap 15.4:libopenssl-3-devel-3.0.1-150400.4.20.1.aarch64",
            "openSUSE Leap 15.4:libopenssl-3-devel-3.0.1-150400.4.20.1.ppc64le",
            "openSUSE Leap 15.4:libopenssl-3-devel-3.0.1-150400.4.20.1.s390x",
            "openSUSE Leap 15.4:libopenssl-3-devel-3.0.1-150400.4.20.1.x86_64",
            "openSUSE Leap 15.4:libopenssl-3-devel-32bit-3.0.1-150400.4.20.1.x86_64",
            "openSUSE Leap 15.4:libopenssl3-3.0.1-150400.4.20.1.aarch64",
            "openSUSE Leap 15.4:libopenssl3-3.0.1-150400.4.20.1.ppc64le",
            "openSUSE Leap 15.4:libopenssl3-3.0.1-150400.4.20.1.s390x",
            "openSUSE Leap 15.4:libopenssl3-3.0.1-150400.4.20.1.x86_64",
            "openSUSE Leap 15.4:libopenssl3-32bit-3.0.1-150400.4.20.1.x86_64",
            "openSUSE Leap 15.4:openssl-3-3.0.1-150400.4.20.1.aarch64",
            "openSUSE Leap 15.4:openssl-3-3.0.1-150400.4.20.1.ppc64le",
            "openSUSE Leap 15.4:openssl-3-3.0.1-150400.4.20.1.s390x",
            "openSUSE Leap 15.4:openssl-3-3.0.1-150400.4.20.1.x86_64",
            "openSUSE Leap 15.4:openssl-3-doc-3.0.1-150400.4.20.1.noarch"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl-3-devel-3.0.1-150400.4.20.1.aarch64",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl-3-devel-3.0.1-150400.4.20.1.ppc64le",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl-3-devel-3.0.1-150400.4.20.1.s390x",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl-3-devel-3.0.1-150400.4.20.1.x86_64",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl3-3.0.1-150400.4.20.1.aarch64",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl3-3.0.1-150400.4.20.1.ppc64le",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl3-3.0.1-150400.4.20.1.s390x",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:libopenssl3-3.0.1-150400.4.20.1.x86_64",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:openssl-3-3.0.1-150400.4.20.1.aarch64",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:openssl-3-3.0.1-150400.4.20.1.ppc64le",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:openssl-3-3.0.1-150400.4.20.1.s390x",
            "SUSE Linux Enterprise Module for Basesystem 15 SP4:openssl-3-3.0.1-150400.4.20.1.x86_64",
            "openSUSE Leap 15.4:libopenssl-3-devel-3.0.1-150400.4.20.1.aarch64",
            "openSUSE Leap 15.4:libopenssl-3-devel-3.0.1-150400.4.20.1.ppc64le",
            "openSUSE Leap 15.4:libopenssl-3-devel-3.0.1-150400.4.20.1.s390x",
            "openSUSE Leap 15.4:libopenssl-3-devel-3.0.1-150400.4.20.1.x86_64",
            "openSUSE Leap 15.4:libopenssl-3-devel-32bit-3.0.1-150400.4.20.1.x86_64",
            "openSUSE Leap 15.4:libopenssl3-3.0.1-150400.4.20.1.aarch64",
            "openSUSE Leap 15.4:libopenssl3-3.0.1-150400.4.20.1.ppc64le",
            "openSUSE Leap 15.4:libopenssl3-3.0.1-150400.4.20.1.s390x",
            "openSUSE Leap 15.4:libopenssl3-3.0.1-150400.4.20.1.x86_64",
            "openSUSE Leap 15.4:libopenssl3-32bit-3.0.1-150400.4.20.1.x86_64",
            "openSUSE Leap 15.4:openssl-3-3.0.1-150400.4.20.1.aarch64",
            "openSUSE Leap 15.4:openssl-3-3.0.1-150400.4.20.1.ppc64le",
            "openSUSE Leap 15.4:openssl-3-3.0.1-150400.4.20.1.s390x",
            "openSUSE Leap 15.4:openssl-3-3.0.1-150400.4.20.1.x86_64",
            "openSUSE Leap 15.4:openssl-3-doc-3.0.1-150400.4.20.1.noarch"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "date": "2023-04-04T07:06:03Z",
          "details": "moderate"
        }
      ],
      "title": "CVE-2023-0464"
    }
  ]
}

{
  "document": {
    "aggregate_severity": {
      "namespace": "https://www.suse.com/support/security/rating/",
      "text": "moderate"
    },
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Copyright 2024 SUSE LLC. All rights reserved.",
      "tlp": {
        "label": "WHITE",
        "url": "https://www.first.org/tlp/"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "Security update for compat-openssl098",
        "title": "Title of the patch"
      },
      {
        "category": "description",
        "text": "This update for compat-openssl098 fixes the following issues:\n  \n- CVE-2023-0464: Fixed excessive Resource Usage Verifying X.509 Policy Constraints (bsc#1209624).\n",
        "title": "Description of the patch"
      },
      {
        "category": "details",
        "text": "SUSE-2023-1737,SUSE-SLE-Module-Legacy-12-2023-1737,SUSE-SLE-SAP-12-SP4-2023-1737,SUSE-SLE-SAP-12-SP5-2023-1737",
        "title": "Patchnames"
      },
      {
        "category": "legal_disclaimer",
        "text": "CSAF 2.0 data is provided by SUSE under the Creative Commons License 4.0 with Attribution (CC-BY-4.0).",
        "title": "Terms of use"
      }
    ],
    "publisher": {
      "category": "vendor",
      "contact_details": "https://www.suse.com/support/security/contact/",
      "name": "SUSE Product Security Team",
      "namespace": "https://www.suse.com/"
    },
    "references": [
      {
        "category": "external",
        "summary": "SUSE ratings",
        "url": "https://www.suse.com/support/security/rating/"
      },
      {
        "category": "self",
        "summary": "URL of this CSAF notice",
        "url": "https://ftp.suse.com/pub/projects/security/csaf/suse-su-2023_1737-1.json"
      },
      {
        "category": "self",
        "summary": "URL for SUSE-SU-2023:1737-1",
        "url": "https://www.suse.com/support/update/announcement/2023/suse-su-20231737-1/"
      },
      {
        "category": "self",
        "summary": "E-Mail link for SUSE-SU-2023:1737-1",
        "url": "https://lists.suse.com/pipermail/sle-updates/2023-April/028602.html"
      },
      {
        "category": "self",
        "summary": "SUSE Bug 1209624",
        "url": "https://bugzilla.suse.com/1209624"
      },
      {
        "category": "self",
        "summary": "SUSE CVE CVE-2023-0464 page",
        "url": "https://www.suse.com/security/cve/CVE-2023-0464/"
      }
    ],
    "title": "Security update for compat-openssl098",
    "tracking": {
      "current_release_date": "2023-04-03T12:43:09Z",
      "generator": {
        "date": "2023-04-03T12:43:09Z",
        "engine": {
          "name": "cve-database.git:bin/generate-csaf.pl",
          "version": "1"
        }
      },
      "id": "SUSE-SU-2023:1737-1",
      "initial_release_date": "2023-04-03T12:43:09Z",
      "revision_history": [
        {
          "date": "2023-04-03T12:43:09Z",
          "number": "1",
          "summary": "Current version"
        }
      ],
      "status": "final",
      "version": "1"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl0_9_8-0.9.8j-106.45.1.i586",
                "product": {
                  "name": "libopenssl0_9_8-0.9.8j-106.45.1.i586",
                  "product_id": "libopenssl0_9_8-0.9.8j-106.45.1.i586"
                }
              }
            ],
            "category": "architecture",
            "name": "i586"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl0_9_8-0.9.8j-106.45.1.s390",
                "product": {
                  "name": "libopenssl0_9_8-0.9.8j-106.45.1.s390",
                  "product_id": "libopenssl0_9_8-0.9.8j-106.45.1.s390"
                }
              }
            ],
            "category": "architecture",
            "name": "s390"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl0_9_8-0.9.8j-106.45.1.s390x",
                "product": {
                  "name": "libopenssl0_9_8-0.9.8j-106.45.1.s390x",
                  "product_id": "libopenssl0_9_8-0.9.8j-106.45.1.s390x"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl0_9_8-32bit-0.9.8j-106.45.1.s390x",
                "product": {
                  "name": "libopenssl0_9_8-32bit-0.9.8j-106.45.1.s390x",
                  "product_id": "libopenssl0_9_8-32bit-0.9.8j-106.45.1.s390x"
                }
              }
            ],
            "category": "architecture",
            "name": "s390x"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "libopenssl0_9_8-0.9.8j-106.45.1.x86_64",
                "product": {
                  "name": "libopenssl0_9_8-0.9.8j-106.45.1.x86_64",
                  "product_id": "libopenssl0_9_8-0.9.8j-106.45.1.x86_64"
                }
              },
              {
                "category": "product_version",
                "name": "libopenssl0_9_8-32bit-0.9.8j-106.45.1.x86_64",
                "product": {
                  "name": "libopenssl0_9_8-32bit-0.9.8j-106.45.1.x86_64",
                  "product_id": "libopenssl0_9_8-32bit-0.9.8j-106.45.1.x86_64"
                }
              }
            ],
            "category": "architecture",
            "name": "x86_64"
          },
          {
            "branches": [
              {
                "category": "product_name",
                "name": "SUSE Linux Enterprise Module for Legacy 12",
                "product": {
                  "name": "SUSE Linux Enterprise Module for Legacy 12",
                  "product_id": "SUSE Linux Enterprise Module for Legacy 12",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:sle-module-legacy:12"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "SUSE Linux Enterprise Server for SAP Applications 12 SP4",
                "product": {
                  "name": "SUSE Linux Enterprise Server for SAP Applications 12 SP4",
                  "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP4",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:sles_sap:12:sp4"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "SUSE Linux Enterprise Server for SAP Applications 12 SP5",
                "product": {
                  "name": "SUSE Linux Enterprise Server for SAP Applications 12 SP5",
                  "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP5",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:suse:sles_sap:12:sp5"
                  }
                }
              }
            ],
            "category": "product_family",
            "name": "SUSE Linux Enterprise"
          }
        ],
        "category": "vendor",
        "name": "SUSE"
      }
    ],
    "relationships": [
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl0_9_8-0.9.8j-106.45.1.s390x as component of SUSE Linux Enterprise Module for Legacy 12",
          "product_id": "SUSE Linux Enterprise Module for Legacy 12:libopenssl0_9_8-0.9.8j-106.45.1.s390x"
        },
        "product_reference": "libopenssl0_9_8-0.9.8j-106.45.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Legacy 12"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl0_9_8-0.9.8j-106.45.1.x86_64 as component of SUSE Linux Enterprise Module for Legacy 12",
          "product_id": "SUSE Linux Enterprise Module for Legacy 12:libopenssl0_9_8-0.9.8j-106.45.1.x86_64"
        },
        "product_reference": "libopenssl0_9_8-0.9.8j-106.45.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Legacy 12"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl0_9_8-32bit-0.9.8j-106.45.1.s390x as component of SUSE Linux Enterprise Module for Legacy 12",
          "product_id": "SUSE Linux Enterprise Module for Legacy 12:libopenssl0_9_8-32bit-0.9.8j-106.45.1.s390x"
        },
        "product_reference": "libopenssl0_9_8-32bit-0.9.8j-106.45.1.s390x",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Legacy 12"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl0_9_8-32bit-0.9.8j-106.45.1.x86_64 as component of SUSE Linux Enterprise Module for Legacy 12",
          "product_id": "SUSE Linux Enterprise Module for Legacy 12:libopenssl0_9_8-32bit-0.9.8j-106.45.1.x86_64"
        },
        "product_reference": "libopenssl0_9_8-32bit-0.9.8j-106.45.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Module for Legacy 12"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl0_9_8-0.9.8j-106.45.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 12 SP4",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl0_9_8-0.9.8j-106.45.1.x86_64"
        },
        "product_reference": "libopenssl0_9_8-0.9.8j-106.45.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP4"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "libopenssl0_9_8-0.9.8j-106.45.1.x86_64 as component of SUSE Linux Enterprise Server for SAP Applications 12 SP5",
          "product_id": "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl0_9_8-0.9.8j-106.45.1.x86_64"
        },
        "product_reference": "libopenssl0_9_8-0.9.8j-106.45.1.x86_64",
        "relates_to_product_reference": "SUSE Linux Enterprise Server for SAP Applications 12 SP5"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2023-0464",
      "ids": [
        {
          "system_name": "SUSE CVE Page",
          "text": "https://www.suse.com/security/cve/CVE-2023-0464"
        }
      ],
      "notes": [
        {
          "category": "general",
          "text": "A security vulnerability has been identified in all supported versions\n\nof OpenSSL related to the verification of X.509 certificate chains\nthat include policy constraints.  Attackers may be able to exploit this\nvulnerability by creating a malicious certificate chain that triggers\nexponential use of computational resources, leading to a denial-of-service\n(DoS) attack on affected systems.\n\nPolicy processing is disabled by default but can be enabled by passing\nthe `-policy\u0027 argument to the command line utilities or by calling the\n`X509_VERIFY_PARAM_set1_policies()\u0027 function.",
          "title": "CVE description"
        }
      ],
      "product_status": {
        "recommended": [
          "SUSE Linux Enterprise Module for Legacy 12:libopenssl0_9_8-0.9.8j-106.45.1.s390x",
          "SUSE Linux Enterprise Module for Legacy 12:libopenssl0_9_8-0.9.8j-106.45.1.x86_64",
          "SUSE Linux Enterprise Module for Legacy 12:libopenssl0_9_8-32bit-0.9.8j-106.45.1.s390x",
          "SUSE Linux Enterprise Module for Legacy 12:libopenssl0_9_8-32bit-0.9.8j-106.45.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl0_9_8-0.9.8j-106.45.1.x86_64",
          "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl0_9_8-0.9.8j-106.45.1.x86_64"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "CVE-2023-0464",
          "url": "https://www.suse.com/security/cve/CVE-2023-0464"
        },
        {
          "category": "external",
          "summary": "SUSE Bug 1209624 for CVE-2023-0464",
          "url": "https://bugzilla.suse.com/1209624"
        },
        {
          "category": "external",
          "summary": "SUSE Bug 1225628 for CVE-2023-0464",
          "url": "https://bugzilla.suse.com/1225628"
        }
      ],
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or \"zypper patch\".\n",
          "product_ids": [
            "SUSE Linux Enterprise Module for Legacy 12:libopenssl0_9_8-0.9.8j-106.45.1.s390x",
            "SUSE Linux Enterprise Module for Legacy 12:libopenssl0_9_8-0.9.8j-106.45.1.x86_64",
            "SUSE Linux Enterprise Module for Legacy 12:libopenssl0_9_8-32bit-0.9.8j-106.45.1.s390x",
            "SUSE Linux Enterprise Module for Legacy 12:libopenssl0_9_8-32bit-0.9.8j-106.45.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl0_9_8-0.9.8j-106.45.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl0_9_8-0.9.8j-106.45.1.x86_64"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "SUSE Linux Enterprise Module for Legacy 12:libopenssl0_9_8-0.9.8j-106.45.1.s390x",
            "SUSE Linux Enterprise Module for Legacy 12:libopenssl0_9_8-0.9.8j-106.45.1.x86_64",
            "SUSE Linux Enterprise Module for Legacy 12:libopenssl0_9_8-32bit-0.9.8j-106.45.1.s390x",
            "SUSE Linux Enterprise Module for Legacy 12:libopenssl0_9_8-32bit-0.9.8j-106.45.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP4:libopenssl0_9_8-0.9.8j-106.45.1.x86_64",
            "SUSE Linux Enterprise Server for SAP Applications 12 SP5:libopenssl0_9_8-0.9.8j-106.45.1.x86_64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "date": "2023-04-03T12:43:09Z",
          "details": "moderate"
        }
      ],
      "title": "CVE-2023-0464"
    }
  ]
}

{
  "document": {
    "aggregate_severity": {
      "namespace": "https://access.redhat.com/security/updates/classification/",
      "text": "Important"
    },
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Copyright \u00a9 Red Hat, Inc. All rights reserved.",
      "tlp": {
        "label": "WHITE",
        "url": "https://www.first.org/tlp/"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "An update is now available for Red Hat JBoss Core Services.\n\nRed Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.",
        "title": "Topic"
      },
      {
        "category": "general",
        "text": "Red Hat JBoss Core Services is a set of supplementary software for Red Hat JBoss middleware products. This software, such as Apache HTTP Server, is common to multiple JBoss middleware products and packaged under Red Hat JBoss Core Services, to allow for faster distribution of updates and for a more consistent update experience.\n\nThis release of Red Hat JBoss Core Services Apache HTTP Server 2.4.57 Service Pack 2 serves as a replacement for Red Hat JBoss Core Services Apache HTTP Server 2.4.57 Service Pack 1, and includes bug fixes and enhancements, which are documented in the Release Notes linked to in the References section.\n\nSecurity Fix(es):\n\n* curl: a heap based buffer overflow in the SOCKS5 proxy handshake (CVE-2023-38545)\n* curl: out of heap memory issue due to missing limit on header quantity (CVE-2023-38039)\n* curl: cookie injection with none file (CVE-2023-38546)\n* jbcs-httpd24-mod_jk: httpd: Apache Tomcat Connectors (mod_jk) Information Disclosure (CVE-2023-41081)\n* jbcs-httpd24-openssl: OpenSSL: Excessive time spent checking DH q parameter value (CVE-2023-3817)\n* mod_http2: reset requests exhaust memory (incomplete fix of CVE-2023-44487) (CVE-2023-45802)\n* openssl: Excessive time spent checking DH keys and parameters (CVE-2023-3446)\n* openssl: Invalid certificate policies in leaf certificates are silently ignored (CVE-2023-0465)\n* openssl: Possible DoS translating ASN.1 object identifiers (CVE-2023-2650)\n* openssl: Denial of service by excessive resource usage in verifying X509 policy constraints (CVE-2023-0464)\n* openssl: Certificate policy check not enabled (CVE-2023-0466)\n\nA Red Hat Security Bulletin which addresses further details about this flaw is available in the References section.\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.",
        "title": "Details"
      },
      {
        "category": "legal_disclaimer",
        "text": "This content is licensed under the Creative Commons Attribution 4.0 International License (https://creativecommons.org/licenses/by/4.0/). If you distribute this content, or a modified version of it, you must provide attribution to Red Hat Inc. and provide a link to the original.",
        "title": "Terms of Use"
      }
    ],
    "publisher": {
      "category": "vendor",
      "contact_details": "https://access.redhat.com/security/team/contact/",
      "issuing_authority": "Red Hat Product Security is responsible for vulnerability handling across all Red Hat products and services.",
      "name": "Red Hat Product Security",
      "namespace": "https://www.redhat.com"
    },
    "references": [
      {
        "category": "self",
        "summary": "https://access.redhat.com/errata/RHSA-2023:7625",
        "url": "https://access.redhat.com/errata/RHSA-2023:7625"
      },
      {
        "category": "external",
        "summary": "https://access.redhat.com/security/updates/classification/#important",
        "url": "https://access.redhat.com/security/updates/classification/#important"
      },
      {
        "category": "external",
        "summary": "2181082",
        "url": "https://bugzilla.redhat.com/show_bug.cgi?id=2181082"
      },
      {
        "category": "external",
        "summary": "2182561",
        "url": "https://bugzilla.redhat.com/show_bug.cgi?id=2182561"
      },
      {
        "category": "external",
        "summary": "2182565",
        "url": "https://bugzilla.redhat.com/show_bug.cgi?id=2182565"
      },
      {
        "category": "external",
        "summary": "2207947",
        "url": "https://bugzilla.redhat.com/show_bug.cgi?id=2207947"
      },
      {
        "category": "external",
        "summary": "2224962",
        "url": "https://bugzilla.redhat.com/show_bug.cgi?id=2224962"
      },
      {
        "category": "external",
        "summary": "2227852",
        "url": "https://bugzilla.redhat.com/show_bug.cgi?id=2227852"
      },
      {
        "category": "external",
        "summary": "2238847",
        "url": "https://bugzilla.redhat.com/show_bug.cgi?id=2238847"
      },
      {
        "category": "external",
        "summary": "2239135",
        "url": "https://bugzilla.redhat.com/show_bug.cgi?id=2239135"
      },
      {
        "category": "external",
        "summary": "2241933",
        "url": "https://bugzilla.redhat.com/show_bug.cgi?id=2241933"
      },
      {
        "category": "external",
        "summary": "2241938",
        "url": "https://bugzilla.redhat.com/show_bug.cgi?id=2241938"
      },
      {
        "category": "external",
        "summary": "2243877",
        "url": "https://bugzilla.redhat.com/show_bug.cgi?id=2243877"
      },
      {
        "category": "self",
        "summary": "Canonical URL",
        "url": "https://security.access.redhat.com/data/csaf/v2/advisories/2023/rhsa-2023_7625.json"
      }
    ],
    "title": "Red Hat Security Advisory: Red Hat JBoss Core Services Apache HTTP Server 2.4.57 SP2 security update",
    "tracking": {
      "current_release_date": "2024-12-04T16:25:59+00:00",
      "generator": {
        "date": "2024-12-04T16:25:59+00:00",
        "engine": {
          "name": "Red Hat SDEngine",
          "version": "4.2.1"
        }
      },
      "id": "RHSA-2023:7625",
      "initial_release_date": "2023-12-07T13:53:38+00:00",
      "revision_history": [
        {
          "date": "2023-12-07T13:53:38+00:00",
          "number": "1",
          "summary": "Initial version"
        },
        {
          "date": "2023-12-07T13:53:38+00:00",
          "number": "2",
          "summary": "Last updated version"
        },
        {
          "date": "2024-12-04T16:25:59+00:00",
          "number": "3",
          "summary": "Last generated version"
        }
      ],
      "status": "final",
      "version": "3"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_name",
                "name": "Red Hat JBoss Core Services on RHEL 7 Server",
                "product": {
                  "name": "Red Hat JBoss Core Services on RHEL 7 Server",
                  "product_id": "7Server-JBCS",
                  "product_identification_helper": {
                    "cpe": "cpe:/a:redhat:jboss_core_services:1::el7"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "Red Hat JBoss Core Services on RHEL 8",
                "product": {
                  "name": "Red Hat JBoss Core Services on RHEL 8",
                  "product_id": "8Base-JBCS",
                  "product_identification_helper": {
                    "cpe": "cpe:/a:redhat:jboss_core_services:1::el8"
                  }
                }
              }
            ],
            "category": "product_family",
            "name": "Red Hat JBoss Core Services"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "jbcs-httpd24-openssl-1:1.1.1k-16.el7jbcs.src",
                "product": {
                  "name": "jbcs-httpd24-openssl-1:1.1.1k-16.el7jbcs.src",
                  "product_id": "jbcs-httpd24-openssl-1:1.1.1k-16.el7jbcs.src",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-openssl@1.1.1k-16.el7jbcs?arch=src\u0026epoch=1"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-curl-0:8.4.0-2.el7jbcs.src",
                "product": {
                  "name": "jbcs-httpd24-curl-0:8.4.0-2.el7jbcs.src",
                  "product_id": "jbcs-httpd24-curl-0:8.4.0-2.el7jbcs.src",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-curl@8.4.0-2.el7jbcs?arch=src"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-openssl-chil-0:1.0.0-19.el7jbcs.src",
                "product": {
                  "name": "jbcs-httpd24-openssl-chil-0:1.0.0-19.el7jbcs.src",
                  "product_id": "jbcs-httpd24-openssl-chil-0:1.0.0-19.el7jbcs.src",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-openssl-chil@1.0.0-19.el7jbcs?arch=src"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el7jbcs.src",
                "product": {
                  "name": "jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el7jbcs.src",
                  "product_id": "jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el7jbcs.src",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-openssl-pkcs11@0.4.10-34.el7jbcs?arch=src"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-apr-util-0:1.6.1-103.el7jbcs.src",
                "product": {
                  "name": "jbcs-httpd24-apr-util-0:1.6.1-103.el7jbcs.src",
                  "product_id": "jbcs-httpd24-apr-util-0:1.6.1-103.el7jbcs.src",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-apr-util@1.6.1-103.el7jbcs?arch=src"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-httpd-0:2.4.57-7.el7jbcs.src",
                "product": {
                  "name": "jbcs-httpd24-httpd-0:2.4.57-7.el7jbcs.src",
                  "product_id": "jbcs-httpd24-httpd-0:2.4.57-7.el7jbcs.src",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-httpd@2.4.57-7.el7jbcs?arch=src"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_http2-0:1.15.19-32.el7jbcs.src",
                "product": {
                  "name": "jbcs-httpd24-mod_http2-0:1.15.19-32.el7jbcs.src",
                  "product_id": "jbcs-httpd24-mod_http2-0:1.15.19-32.el7jbcs.src",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_http2@1.15.19-32.el7jbcs?arch=src"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_jk-0:1.2.49-1.redhat_1.el7jbcs.src",
                "product": {
                  "name": "jbcs-httpd24-mod_jk-0:1.2.49-1.redhat_1.el7jbcs.src",
                  "product_id": "jbcs-httpd24-mod_jk-0:1.2.49-1.redhat_1.el7jbcs.src",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_jk@1.2.49-1.redhat_1.el7jbcs?arch=src"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_md-1:2.4.24-2.el7jbcs.src",
                "product": {
                  "name": "jbcs-httpd24-mod_md-1:2.4.24-2.el7jbcs.src",
                  "product_id": "jbcs-httpd24-mod_md-1:2.4.24-2.el7jbcs.src",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_md@2.4.24-2.el7jbcs?arch=src\u0026epoch=1"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el7jbcs.src",
                "product": {
                  "name": "jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el7jbcs.src",
                  "product_id": "jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el7jbcs.src",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_proxy_cluster@1.3.19-7.el7jbcs?arch=src"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_security-0:2.9.3-32.el7jbcs.src",
                "product": {
                  "name": "jbcs-httpd24-mod_security-0:2.9.3-32.el7jbcs.src",
                  "product_id": "jbcs-httpd24-mod_security-0:2.9.3-32.el7jbcs.src",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_security@2.9.3-32.el7jbcs?arch=src"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-openssl-1:1.1.1k-16.el8jbcs.src",
                "product": {
                  "name": "jbcs-httpd24-openssl-1:1.1.1k-16.el8jbcs.src",
                  "product_id": "jbcs-httpd24-openssl-1:1.1.1k-16.el8jbcs.src",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-openssl@1.1.1k-16.el8jbcs?arch=src\u0026epoch=1"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-curl-0:8.4.0-2.el8jbcs.src",
                "product": {
                  "name": "jbcs-httpd24-curl-0:8.4.0-2.el8jbcs.src",
                  "product_id": "jbcs-httpd24-curl-0:8.4.0-2.el8jbcs.src",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-curl@8.4.0-2.el8jbcs?arch=src"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-openssl-chil-0:1.0.0-19.el8jbcs.src",
                "product": {
                  "name": "jbcs-httpd24-openssl-chil-0:1.0.0-19.el8jbcs.src",
                  "product_id": "jbcs-httpd24-openssl-chil-0:1.0.0-19.el8jbcs.src",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-openssl-chil@1.0.0-19.el8jbcs?arch=src"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el8jbcs.src",
                "product": {
                  "name": "jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el8jbcs.src",
                  "product_id": "jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el8jbcs.src",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-openssl-pkcs11@0.4.10-34.el8jbcs?arch=src"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-apr-util-0:1.6.1-103.el8jbcs.src",
                "product": {
                  "name": "jbcs-httpd24-apr-util-0:1.6.1-103.el8jbcs.src",
                  "product_id": "jbcs-httpd24-apr-util-0:1.6.1-103.el8jbcs.src",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-apr-util@1.6.1-103.el8jbcs?arch=src"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-httpd-0:2.4.57-7.el8jbcs.src",
                "product": {
                  "name": "jbcs-httpd24-httpd-0:2.4.57-7.el8jbcs.src",
                  "product_id": "jbcs-httpd24-httpd-0:2.4.57-7.el8jbcs.src",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-httpd@2.4.57-7.el8jbcs?arch=src"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_http2-0:1.15.19-32.el8jbcs.src",
                "product": {
                  "name": "jbcs-httpd24-mod_http2-0:1.15.19-32.el8jbcs.src",
                  "product_id": "jbcs-httpd24-mod_http2-0:1.15.19-32.el8jbcs.src",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_http2@1.15.19-32.el8jbcs?arch=src"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_jk-0:1.2.49-1.redhat_1.el8jbcs.src",
                "product": {
                  "name": "jbcs-httpd24-mod_jk-0:1.2.49-1.redhat_1.el8jbcs.src",
                  "product_id": "jbcs-httpd24-mod_jk-0:1.2.49-1.redhat_1.el8jbcs.src",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_jk@1.2.49-1.redhat_1.el8jbcs?arch=src"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_md-1:2.4.24-2.el8jbcs.src",
                "product": {
                  "name": "jbcs-httpd24-mod_md-1:2.4.24-2.el8jbcs.src",
                  "product_id": "jbcs-httpd24-mod_md-1:2.4.24-2.el8jbcs.src",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_md@2.4.24-2.el8jbcs?arch=src\u0026epoch=1"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el8jbcs.src",
                "product": {
                  "name": "jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el8jbcs.src",
                  "product_id": "jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el8jbcs.src",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_proxy_cluster@1.3.19-7.el8jbcs?arch=src"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_security-0:2.9.3-32.el8jbcs.src",
                "product": {
                  "name": "jbcs-httpd24-mod_security-0:2.9.3-32.el8jbcs.src",
                  "product_id": "jbcs-httpd24-mod_security-0:2.9.3-32.el8jbcs.src",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_security@2.9.3-32.el8jbcs?arch=src"
                  }
                }
              }
            ],
            "category": "architecture",
            "name": "src"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "jbcs-httpd24-openssl-1:1.1.1k-16.el7jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-openssl-1:1.1.1k-16.el7jbcs.x86_64",
                  "product_id": "jbcs-httpd24-openssl-1:1.1.1k-16.el7jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-openssl@1.1.1k-16.el7jbcs?arch=x86_64\u0026epoch=1"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-openssl-devel-1:1.1.1k-16.el7jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-openssl-devel-1:1.1.1k-16.el7jbcs.x86_64",
                  "product_id": "jbcs-httpd24-openssl-devel-1:1.1.1k-16.el7jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-openssl-devel@1.1.1k-16.el7jbcs?arch=x86_64\u0026epoch=1"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-openssl-libs-1:1.1.1k-16.el7jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-openssl-libs-1:1.1.1k-16.el7jbcs.x86_64",
                  "product_id": "jbcs-httpd24-openssl-libs-1:1.1.1k-16.el7jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-openssl-libs@1.1.1k-16.el7jbcs?arch=x86_64\u0026epoch=1"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-openssl-perl-1:1.1.1k-16.el7jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-openssl-perl-1:1.1.1k-16.el7jbcs.x86_64",
                  "product_id": "jbcs-httpd24-openssl-perl-1:1.1.1k-16.el7jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-openssl-perl@1.1.1k-16.el7jbcs?arch=x86_64\u0026epoch=1"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-openssl-static-1:1.1.1k-16.el7jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-openssl-static-1:1.1.1k-16.el7jbcs.x86_64",
                  "product_id": "jbcs-httpd24-openssl-static-1:1.1.1k-16.el7jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-openssl-static@1.1.1k-16.el7jbcs?arch=x86_64\u0026epoch=1"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-openssl-debuginfo-1:1.1.1k-16.el7jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-openssl-debuginfo-1:1.1.1k-16.el7jbcs.x86_64",
                  "product_id": "jbcs-httpd24-openssl-debuginfo-1:1.1.1k-16.el7jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-openssl-debuginfo@1.1.1k-16.el7jbcs?arch=x86_64\u0026epoch=1"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-curl-0:8.4.0-2.el7jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-curl-0:8.4.0-2.el7jbcs.x86_64",
                  "product_id": "jbcs-httpd24-curl-0:8.4.0-2.el7jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-curl@8.4.0-2.el7jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-libcurl-0:8.4.0-2.el7jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-libcurl-0:8.4.0-2.el7jbcs.x86_64",
                  "product_id": "jbcs-httpd24-libcurl-0:8.4.0-2.el7jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-libcurl@8.4.0-2.el7jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-libcurl-devel-0:8.4.0-2.el7jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-libcurl-devel-0:8.4.0-2.el7jbcs.x86_64",
                  "product_id": "jbcs-httpd24-libcurl-devel-0:8.4.0-2.el7jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-libcurl-devel@8.4.0-2.el7jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-curl-debuginfo-0:8.4.0-2.el7jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-curl-debuginfo-0:8.4.0-2.el7jbcs.x86_64",
                  "product_id": "jbcs-httpd24-curl-debuginfo-0:8.4.0-2.el7jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-curl-debuginfo@8.4.0-2.el7jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-openssl-chil-0:1.0.0-19.el7jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-openssl-chil-0:1.0.0-19.el7jbcs.x86_64",
                  "product_id": "jbcs-httpd24-openssl-chil-0:1.0.0-19.el7jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-openssl-chil@1.0.0-19.el7jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-openssl-chil-debuginfo-0:1.0.0-19.el7jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-openssl-chil-debuginfo-0:1.0.0-19.el7jbcs.x86_64",
                  "product_id": "jbcs-httpd24-openssl-chil-debuginfo-0:1.0.0-19.el7jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-openssl-chil-debuginfo@1.0.0-19.el7jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el7jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el7jbcs.x86_64",
                  "product_id": "jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el7jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-openssl-pkcs11@0.4.10-34.el7jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-34.el7jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-34.el7jbcs.x86_64",
                  "product_id": "jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-34.el7jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-openssl-pkcs11-debuginfo@0.4.10-34.el7jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-apr-util-0:1.6.1-103.el7jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-apr-util-0:1.6.1-103.el7jbcs.x86_64",
                  "product_id": "jbcs-httpd24-apr-util-0:1.6.1-103.el7jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-apr-util@1.6.1-103.el7jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-apr-util-devel-0:1.6.1-103.el7jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-apr-util-devel-0:1.6.1-103.el7jbcs.x86_64",
                  "product_id": "jbcs-httpd24-apr-util-devel-0:1.6.1-103.el7jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-apr-util-devel@1.6.1-103.el7jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-apr-util-ldap-0:1.6.1-103.el7jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-apr-util-ldap-0:1.6.1-103.el7jbcs.x86_64",
                  "product_id": "jbcs-httpd24-apr-util-ldap-0:1.6.1-103.el7jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-apr-util-ldap@1.6.1-103.el7jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-apr-util-mysql-0:1.6.1-103.el7jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-apr-util-mysql-0:1.6.1-103.el7jbcs.x86_64",
                  "product_id": "jbcs-httpd24-apr-util-mysql-0:1.6.1-103.el7jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-apr-util-mysql@1.6.1-103.el7jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-apr-util-nss-0:1.6.1-103.el7jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-apr-util-nss-0:1.6.1-103.el7jbcs.x86_64",
                  "product_id": "jbcs-httpd24-apr-util-nss-0:1.6.1-103.el7jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-apr-util-nss@1.6.1-103.el7jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-apr-util-odbc-0:1.6.1-103.el7jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-apr-util-odbc-0:1.6.1-103.el7jbcs.x86_64",
                  "product_id": "jbcs-httpd24-apr-util-odbc-0:1.6.1-103.el7jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-apr-util-odbc@1.6.1-103.el7jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-apr-util-openssl-0:1.6.1-103.el7jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-apr-util-openssl-0:1.6.1-103.el7jbcs.x86_64",
                  "product_id": "jbcs-httpd24-apr-util-openssl-0:1.6.1-103.el7jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-apr-util-openssl@1.6.1-103.el7jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-apr-util-pgsql-0:1.6.1-103.el7jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-apr-util-pgsql-0:1.6.1-103.el7jbcs.x86_64",
                  "product_id": "jbcs-httpd24-apr-util-pgsql-0:1.6.1-103.el7jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-apr-util-pgsql@1.6.1-103.el7jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-apr-util-sqlite-0:1.6.1-103.el7jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-apr-util-sqlite-0:1.6.1-103.el7jbcs.x86_64",
                  "product_id": "jbcs-httpd24-apr-util-sqlite-0:1.6.1-103.el7jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-apr-util-sqlite@1.6.1-103.el7jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-apr-util-debuginfo-0:1.6.1-103.el7jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-apr-util-debuginfo-0:1.6.1-103.el7jbcs.x86_64",
                  "product_id": "jbcs-httpd24-apr-util-debuginfo-0:1.6.1-103.el7jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-apr-util-debuginfo@1.6.1-103.el7jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-httpd-0:2.4.57-7.el7jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-httpd-0:2.4.57-7.el7jbcs.x86_64",
                  "product_id": "jbcs-httpd24-httpd-0:2.4.57-7.el7jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-httpd@2.4.57-7.el7jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-httpd-devel-0:2.4.57-7.el7jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-httpd-devel-0:2.4.57-7.el7jbcs.x86_64",
                  "product_id": "jbcs-httpd24-httpd-devel-0:2.4.57-7.el7jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-httpd-devel@2.4.57-7.el7jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-httpd-selinux-0:2.4.57-7.el7jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-httpd-selinux-0:2.4.57-7.el7jbcs.x86_64",
                  "product_id": "jbcs-httpd24-httpd-selinux-0:2.4.57-7.el7jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-httpd-selinux@2.4.57-7.el7jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-httpd-tools-0:2.4.57-7.el7jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-httpd-tools-0:2.4.57-7.el7jbcs.x86_64",
                  "product_id": "jbcs-httpd24-httpd-tools-0:2.4.57-7.el7jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-httpd-tools@2.4.57-7.el7jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_ldap-0:2.4.57-7.el7jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_ldap-0:2.4.57-7.el7jbcs.x86_64",
                  "product_id": "jbcs-httpd24-mod_ldap-0:2.4.57-7.el7jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_ldap@2.4.57-7.el7jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_proxy_html-1:2.4.57-7.el7jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_proxy_html-1:2.4.57-7.el7jbcs.x86_64",
                  "product_id": "jbcs-httpd24-mod_proxy_html-1:2.4.57-7.el7jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_proxy_html@2.4.57-7.el7jbcs?arch=x86_64\u0026epoch=1"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_session-0:2.4.57-7.el7jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_session-0:2.4.57-7.el7jbcs.x86_64",
                  "product_id": "jbcs-httpd24-mod_session-0:2.4.57-7.el7jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_session@2.4.57-7.el7jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_ssl-1:2.4.57-7.el7jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_ssl-1:2.4.57-7.el7jbcs.x86_64",
                  "product_id": "jbcs-httpd24-mod_ssl-1:2.4.57-7.el7jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_ssl@2.4.57-7.el7jbcs?arch=x86_64\u0026epoch=1"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-httpd-debuginfo-0:2.4.57-7.el7jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-httpd-debuginfo-0:2.4.57-7.el7jbcs.x86_64",
                  "product_id": "jbcs-httpd24-httpd-debuginfo-0:2.4.57-7.el7jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-httpd-debuginfo@2.4.57-7.el7jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_http2-0:1.15.19-32.el7jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_http2-0:1.15.19-32.el7jbcs.x86_64",
                  "product_id": "jbcs-httpd24-mod_http2-0:1.15.19-32.el7jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_http2@1.15.19-32.el7jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_http2-debuginfo-0:1.15.19-32.el7jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_http2-debuginfo-0:1.15.19-32.el7jbcs.x86_64",
                  "product_id": "jbcs-httpd24-mod_http2-debuginfo-0:1.15.19-32.el7jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_http2-debuginfo@1.15.19-32.el7jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_jk-ap24-0:1.2.49-1.redhat_1.el7jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_jk-ap24-0:1.2.49-1.redhat_1.el7jbcs.x86_64",
                  "product_id": "jbcs-httpd24-mod_jk-ap24-0:1.2.49-1.redhat_1.el7jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_jk-ap24@1.2.49-1.redhat_1.el7jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_jk-debuginfo-0:1.2.49-1.redhat_1.el7jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_jk-debuginfo-0:1.2.49-1.redhat_1.el7jbcs.x86_64",
                  "product_id": "jbcs-httpd24-mod_jk-debuginfo-0:1.2.49-1.redhat_1.el7jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_jk-debuginfo@1.2.49-1.redhat_1.el7jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_md-1:2.4.24-2.el7jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_md-1:2.4.24-2.el7jbcs.x86_64",
                  "product_id": "jbcs-httpd24-mod_md-1:2.4.24-2.el7jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_md@2.4.24-2.el7jbcs?arch=x86_64\u0026epoch=1"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_md-debuginfo-1:2.4.24-2.el7jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_md-debuginfo-1:2.4.24-2.el7jbcs.x86_64",
                  "product_id": "jbcs-httpd24-mod_md-debuginfo-1:2.4.24-2.el7jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_md-debuginfo@2.4.24-2.el7jbcs?arch=x86_64\u0026epoch=1"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el7jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el7jbcs.x86_64",
                  "product_id": "jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el7jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_proxy_cluster@1.3.19-7.el7jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_proxy_cluster-debuginfo-0:1.3.19-7.el7jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_proxy_cluster-debuginfo-0:1.3.19-7.el7jbcs.x86_64",
                  "product_id": "jbcs-httpd24-mod_proxy_cluster-debuginfo-0:1.3.19-7.el7jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_proxy_cluster-debuginfo@1.3.19-7.el7jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_security-0:2.9.3-32.el7jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_security-0:2.9.3-32.el7jbcs.x86_64",
                  "product_id": "jbcs-httpd24-mod_security-0:2.9.3-32.el7jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_security@2.9.3-32.el7jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_security-debuginfo-0:2.9.3-32.el7jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_security-debuginfo-0:2.9.3-32.el7jbcs.x86_64",
                  "product_id": "jbcs-httpd24-mod_security-debuginfo-0:2.9.3-32.el7jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_security-debuginfo@2.9.3-32.el7jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-openssl-1:1.1.1k-16.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-openssl-1:1.1.1k-16.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-openssl-1:1.1.1k-16.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-openssl@1.1.1k-16.el8jbcs?arch=x86_64\u0026epoch=1"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-openssl-devel-1:1.1.1k-16.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-openssl-devel-1:1.1.1k-16.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-openssl-devel-1:1.1.1k-16.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-openssl-devel@1.1.1k-16.el8jbcs?arch=x86_64\u0026epoch=1"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-openssl-libs-1:1.1.1k-16.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-openssl-libs-1:1.1.1k-16.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-openssl-libs-1:1.1.1k-16.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-openssl-libs@1.1.1k-16.el8jbcs?arch=x86_64\u0026epoch=1"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-openssl-perl-1:1.1.1k-16.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-openssl-perl-1:1.1.1k-16.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-openssl-perl-1:1.1.1k-16.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-openssl-perl@1.1.1k-16.el8jbcs?arch=x86_64\u0026epoch=1"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-openssl-static-1:1.1.1k-16.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-openssl-static-1:1.1.1k-16.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-openssl-static-1:1.1.1k-16.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-openssl-static@1.1.1k-16.el8jbcs?arch=x86_64\u0026epoch=1"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-openssl-debuginfo-1:1.1.1k-16.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-openssl-debuginfo-1:1.1.1k-16.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-openssl-debuginfo-1:1.1.1k-16.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-openssl-debuginfo@1.1.1k-16.el8jbcs?arch=x86_64\u0026epoch=1"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-openssl-libs-debuginfo-1:1.1.1k-16.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-openssl-libs-debuginfo-1:1.1.1k-16.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-openssl-libs-debuginfo-1:1.1.1k-16.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-openssl-libs-debuginfo@1.1.1k-16.el8jbcs?arch=x86_64\u0026epoch=1"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-curl-0:8.4.0-2.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-curl-0:8.4.0-2.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-curl-0:8.4.0-2.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-curl@8.4.0-2.el8jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-libcurl-0:8.4.0-2.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-libcurl-0:8.4.0-2.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-libcurl-0:8.4.0-2.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-libcurl@8.4.0-2.el8jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-libcurl-devel-0:8.4.0-2.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-libcurl-devel-0:8.4.0-2.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-libcurl-devel-0:8.4.0-2.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-libcurl-devel@8.4.0-2.el8jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-curl-debuginfo-0:8.4.0-2.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-curl-debuginfo-0:8.4.0-2.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-curl-debuginfo-0:8.4.0-2.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-curl-debuginfo@8.4.0-2.el8jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-libcurl-debuginfo-0:8.4.0-2.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-libcurl-debuginfo-0:8.4.0-2.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-libcurl-debuginfo-0:8.4.0-2.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-libcurl-debuginfo@8.4.0-2.el8jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-openssl-chil-0:1.0.0-19.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-openssl-chil-0:1.0.0-19.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-openssl-chil-0:1.0.0-19.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-openssl-chil@1.0.0-19.el8jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-openssl-chil-debuginfo-0:1.0.0-19.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-openssl-chil-debuginfo-0:1.0.0-19.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-openssl-chil-debuginfo-0:1.0.0-19.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-openssl-chil-debuginfo@1.0.0-19.el8jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-openssl-pkcs11@0.4.10-34.el8jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-34.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-34.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-34.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-openssl-pkcs11-debuginfo@0.4.10-34.el8jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-apr-util-0:1.6.1-103.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-apr-util-0:1.6.1-103.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-apr-util-0:1.6.1-103.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-apr-util@1.6.1-103.el8jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-apr-util-devel-0:1.6.1-103.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-apr-util-devel-0:1.6.1-103.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-apr-util-devel-0:1.6.1-103.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-apr-util-devel@1.6.1-103.el8jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-apr-util-ldap-0:1.6.1-103.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-apr-util-ldap-0:1.6.1-103.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-apr-util-ldap-0:1.6.1-103.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-apr-util-ldap@1.6.1-103.el8jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-apr-util-mysql-0:1.6.1-103.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-apr-util-mysql-0:1.6.1-103.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-apr-util-mysql-0:1.6.1-103.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-apr-util-mysql@1.6.1-103.el8jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-apr-util-nss-0:1.6.1-103.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-apr-util-nss-0:1.6.1-103.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-apr-util-nss-0:1.6.1-103.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-apr-util-nss@1.6.1-103.el8jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-apr-util-odbc-0:1.6.1-103.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-apr-util-odbc-0:1.6.1-103.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-apr-util-odbc-0:1.6.1-103.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-apr-util-odbc@1.6.1-103.el8jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-apr-util-openssl-0:1.6.1-103.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-apr-util-openssl-0:1.6.1-103.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-apr-util-openssl-0:1.6.1-103.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-apr-util-openssl@1.6.1-103.el8jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-apr-util-pgsql-0:1.6.1-103.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-apr-util-pgsql-0:1.6.1-103.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-apr-util-pgsql-0:1.6.1-103.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-apr-util-pgsql@1.6.1-103.el8jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-apr-util-sqlite-0:1.6.1-103.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-apr-util-sqlite-0:1.6.1-103.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-apr-util-sqlite-0:1.6.1-103.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-apr-util-sqlite@1.6.1-103.el8jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-apr-util-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-apr-util-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-apr-util-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-apr-util-debuginfo@1.6.1-103.el8jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-apr-util-ldap-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-apr-util-ldap-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-apr-util-ldap-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-apr-util-ldap-debuginfo@1.6.1-103.el8jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-apr-util-mysql-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-apr-util-mysql-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-apr-util-mysql-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-apr-util-mysql-debuginfo@1.6.1-103.el8jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-apr-util-nss-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-apr-util-nss-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-apr-util-nss-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-apr-util-nss-debuginfo@1.6.1-103.el8jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-apr-util-odbc-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-apr-util-odbc-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-apr-util-odbc-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-apr-util-odbc-debuginfo@1.6.1-103.el8jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-apr-util-openssl-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-apr-util-openssl-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-apr-util-openssl-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-apr-util-openssl-debuginfo@1.6.1-103.el8jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-apr-util-pgsql-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-apr-util-pgsql-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-apr-util-pgsql-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-apr-util-pgsql-debuginfo@1.6.1-103.el8jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-apr-util-sqlite-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-apr-util-sqlite-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-apr-util-sqlite-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-apr-util-sqlite-debuginfo@1.6.1-103.el8jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-httpd-0:2.4.57-7.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-httpd-0:2.4.57-7.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-httpd-0:2.4.57-7.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-httpd@2.4.57-7.el8jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-httpd-devel-0:2.4.57-7.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-httpd-devel-0:2.4.57-7.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-httpd-devel-0:2.4.57-7.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-httpd-devel@2.4.57-7.el8jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-httpd-selinux-0:2.4.57-7.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-httpd-selinux-0:2.4.57-7.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-httpd-selinux-0:2.4.57-7.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-httpd-selinux@2.4.57-7.el8jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-httpd-tools-0:2.4.57-7.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-httpd-tools-0:2.4.57-7.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-httpd-tools-0:2.4.57-7.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-httpd-tools@2.4.57-7.el8jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_ldap-0:2.4.57-7.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_ldap-0:2.4.57-7.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-mod_ldap-0:2.4.57-7.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_ldap@2.4.57-7.el8jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_proxy_html-1:2.4.57-7.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_proxy_html-1:2.4.57-7.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-mod_proxy_html-1:2.4.57-7.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_proxy_html@2.4.57-7.el8jbcs?arch=x86_64\u0026epoch=1"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_session-0:2.4.57-7.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_session-0:2.4.57-7.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-mod_session-0:2.4.57-7.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_session@2.4.57-7.el8jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_ssl-1:2.4.57-7.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_ssl-1:2.4.57-7.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-mod_ssl-1:2.4.57-7.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_ssl@2.4.57-7.el8jbcs?arch=x86_64\u0026epoch=1"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-httpd-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-httpd-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-httpd-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-httpd-debuginfo@2.4.57-7.el8jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-httpd-tools-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-httpd-tools-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-httpd-tools-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-httpd-tools-debuginfo@2.4.57-7.el8jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_ldap-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_ldap-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-mod_ldap-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_ldap-debuginfo@2.4.57-7.el8jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_proxy_html-debuginfo-1:2.4.57-7.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_proxy_html-debuginfo-1:2.4.57-7.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-mod_proxy_html-debuginfo-1:2.4.57-7.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_proxy_html-debuginfo@2.4.57-7.el8jbcs?arch=x86_64\u0026epoch=1"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_session-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_session-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-mod_session-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_session-debuginfo@2.4.57-7.el8jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_ssl-debuginfo-1:2.4.57-7.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_ssl-debuginfo-1:2.4.57-7.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-mod_ssl-debuginfo-1:2.4.57-7.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_ssl-debuginfo@2.4.57-7.el8jbcs?arch=x86_64\u0026epoch=1"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_http2-0:1.15.19-32.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_http2-0:1.15.19-32.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-mod_http2-0:1.15.19-32.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_http2@1.15.19-32.el8jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_http2-debuginfo-0:1.15.19-32.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_http2-debuginfo-0:1.15.19-32.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-mod_http2-debuginfo-0:1.15.19-32.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_http2-debuginfo@1.15.19-32.el8jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_jk-ap24-0:1.2.49-1.redhat_1.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_jk-ap24-0:1.2.49-1.redhat_1.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-mod_jk-ap24-0:1.2.49-1.redhat_1.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_jk-ap24@1.2.49-1.redhat_1.el8jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_jk-ap24-debuginfo-0:1.2.49-1.redhat_1.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_jk-ap24-debuginfo-0:1.2.49-1.redhat_1.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-mod_jk-ap24-debuginfo-0:1.2.49-1.redhat_1.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_jk-ap24-debuginfo@1.2.49-1.redhat_1.el8jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_md-1:2.4.24-2.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_md-1:2.4.24-2.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-mod_md-1:2.4.24-2.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_md@2.4.24-2.el8jbcs?arch=x86_64\u0026epoch=1"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_md-debuginfo-1:2.4.24-2.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_md-debuginfo-1:2.4.24-2.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-mod_md-debuginfo-1:2.4.24-2.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_md-debuginfo@2.4.24-2.el8jbcs?arch=x86_64\u0026epoch=1"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_proxy_cluster@1.3.19-7.el8jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_proxy_cluster-debuginfo-0:1.3.19-7.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_proxy_cluster-debuginfo-0:1.3.19-7.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-mod_proxy_cluster-debuginfo-0:1.3.19-7.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_proxy_cluster-debuginfo@1.3.19-7.el8jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_security-0:2.9.3-32.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_security-0:2.9.3-32.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-mod_security-0:2.9.3-32.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_security@2.9.3-32.el8jbcs?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-mod_security-debuginfo-0:2.9.3-32.el8jbcs.x86_64",
                "product": {
                  "name": "jbcs-httpd24-mod_security-debuginfo-0:2.9.3-32.el8jbcs.x86_64",
                  "product_id": "jbcs-httpd24-mod_security-debuginfo-0:2.9.3-32.el8jbcs.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-mod_security-debuginfo@2.9.3-32.el8jbcs?arch=x86_64"
                  }
                }
              }
            ],
            "category": "architecture",
            "name": "x86_64"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "jbcs-httpd24-httpd-manual-0:2.4.57-7.el7jbcs.noarch",
                "product": {
                  "name": "jbcs-httpd24-httpd-manual-0:2.4.57-7.el7jbcs.noarch",
                  "product_id": "jbcs-httpd24-httpd-manual-0:2.4.57-7.el7jbcs.noarch",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-httpd-manual@2.4.57-7.el7jbcs?arch=noarch"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "jbcs-httpd24-httpd-manual-0:2.4.57-7.el8jbcs.noarch",
                "product": {
                  "name": "jbcs-httpd24-httpd-manual-0:2.4.57-7.el8jbcs.noarch",
                  "product_id": "jbcs-httpd24-httpd-manual-0:2.4.57-7.el8jbcs.noarch",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/jbcs-httpd24-httpd-manual@2.4.57-7.el8jbcs?arch=noarch"
                  }
                }
              }
            ],
            "category": "architecture",
            "name": "noarch"
          }
        ],
        "category": "vendor",
        "name": "Red Hat"
      }
    ],
    "relationships": [
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-apr-util-0:1.6.1-103.el7jbcs.src as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el7jbcs.src"
        },
        "product_reference": "jbcs-httpd24-apr-util-0:1.6.1-103.el7jbcs.src",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-apr-util-0:1.6.1-103.el7jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el7jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-apr-util-0:1.6.1-103.el7jbcs.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-apr-util-debuginfo-0:1.6.1-103.el7jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-apr-util-debuginfo-0:1.6.1-103.el7jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-apr-util-debuginfo-0:1.6.1-103.el7jbcs.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-apr-util-devel-0:1.6.1-103.el7jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-apr-util-devel-0:1.6.1-103.el7jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-apr-util-devel-0:1.6.1-103.el7jbcs.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-apr-util-ldap-0:1.6.1-103.el7jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-apr-util-ldap-0:1.6.1-103.el7jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-apr-util-ldap-0:1.6.1-103.el7jbcs.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-apr-util-mysql-0:1.6.1-103.el7jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-apr-util-mysql-0:1.6.1-103.el7jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-apr-util-mysql-0:1.6.1-103.el7jbcs.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-apr-util-nss-0:1.6.1-103.el7jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-apr-util-nss-0:1.6.1-103.el7jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-apr-util-nss-0:1.6.1-103.el7jbcs.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-apr-util-odbc-0:1.6.1-103.el7jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-apr-util-odbc-0:1.6.1-103.el7jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-apr-util-odbc-0:1.6.1-103.el7jbcs.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-apr-util-openssl-0:1.6.1-103.el7jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-apr-util-openssl-0:1.6.1-103.el7jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-apr-util-openssl-0:1.6.1-103.el7jbcs.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-apr-util-pgsql-0:1.6.1-103.el7jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-apr-util-pgsql-0:1.6.1-103.el7jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-apr-util-pgsql-0:1.6.1-103.el7jbcs.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-apr-util-sqlite-0:1.6.1-103.el7jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-apr-util-sqlite-0:1.6.1-103.el7jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-apr-util-sqlite-0:1.6.1-103.el7jbcs.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-curl-0:8.4.0-2.el7jbcs.src as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el7jbcs.src"
        },
        "product_reference": "jbcs-httpd24-curl-0:8.4.0-2.el7jbcs.src",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-curl-0:8.4.0-2.el7jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el7jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-curl-0:8.4.0-2.el7jbcs.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-curl-debuginfo-0:8.4.0-2.el7jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-curl-debuginfo-0:8.4.0-2.el7jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-curl-debuginfo-0:8.4.0-2.el7jbcs.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-httpd-0:2.4.57-7.el7jbcs.src as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el7jbcs.src"
        },
        "product_reference": "jbcs-httpd24-httpd-0:2.4.57-7.el7jbcs.src",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-httpd-0:2.4.57-7.el7jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el7jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-httpd-0:2.4.57-7.el7jbcs.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-httpd-debuginfo-0:2.4.57-7.el7jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.57-7.el7jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-httpd-debuginfo-0:2.4.57-7.el7jbcs.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-httpd-devel-0:2.4.57-7.el7jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.57-7.el7jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-httpd-devel-0:2.4.57-7.el7jbcs.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-httpd-manual-0:2.4.57-7.el7jbcs.noarch as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.57-7.el7jbcs.noarch"
        },
        "product_reference": "jbcs-httpd24-httpd-manual-0:2.4.57-7.el7jbcs.noarch",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-httpd-selinux-0:2.4.57-7.el7jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.57-7.el7jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-httpd-selinux-0:2.4.57-7.el7jbcs.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-httpd-tools-0:2.4.57-7.el7jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.57-7.el7jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-httpd-tools-0:2.4.57-7.el7jbcs.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-libcurl-0:8.4.0-2.el7jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-libcurl-0:8.4.0-2.el7jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-libcurl-0:8.4.0-2.el7jbcs.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-libcurl-devel-0:8.4.0-2.el7jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-libcurl-devel-0:8.4.0-2.el7jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-libcurl-devel-0:8.4.0-2.el7jbcs.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_http2-0:1.15.19-32.el7jbcs.src as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el7jbcs.src"
        },
        "product_reference": "jbcs-httpd24-mod_http2-0:1.15.19-32.el7jbcs.src",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_http2-0:1.15.19-32.el7jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el7jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_http2-0:1.15.19-32.el7jbcs.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_http2-debuginfo-0:1.15.19-32.el7jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.19-32.el7jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_http2-debuginfo-0:1.15.19-32.el7jbcs.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_jk-0:1.2.49-1.redhat_1.el7jbcs.src as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.49-1.redhat_1.el7jbcs.src"
        },
        "product_reference": "jbcs-httpd24-mod_jk-0:1.2.49-1.redhat_1.el7jbcs.src",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_jk-ap24-0:1.2.49-1.redhat_1.el7jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.49-1.redhat_1.el7jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_jk-ap24-0:1.2.49-1.redhat_1.el7jbcs.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_jk-debuginfo-0:1.2.49-1.redhat_1.el7jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.49-1.redhat_1.el7jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_jk-debuginfo-0:1.2.49-1.redhat_1.el7jbcs.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_ldap-0:2.4.57-7.el7jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.57-7.el7jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_ldap-0:2.4.57-7.el7jbcs.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_md-1:2.4.24-2.el7jbcs.src as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el7jbcs.src"
        },
        "product_reference": "jbcs-httpd24-mod_md-1:2.4.24-2.el7jbcs.src",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_md-1:2.4.24-2.el7jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el7jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_md-1:2.4.24-2.el7jbcs.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_md-debuginfo-1:2.4.24-2.el7jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.4.24-2.el7jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_md-debuginfo-1:2.4.24-2.el7jbcs.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el7jbcs.src as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el7jbcs.src"
        },
        "product_reference": "jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el7jbcs.src",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el7jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el7jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el7jbcs.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_proxy_cluster-debuginfo-0:1.3.19-7.el7jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-mod_proxy_cluster-debuginfo-0:1.3.19-7.el7jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_proxy_cluster-debuginfo-0:1.3.19-7.el7jbcs.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_proxy_html-1:2.4.57-7.el7jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.57-7.el7jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_proxy_html-1:2.4.57-7.el7jbcs.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_security-0:2.9.3-32.el7jbcs.src as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el7jbcs.src"
        },
        "product_reference": "jbcs-httpd24-mod_security-0:2.9.3-32.el7jbcs.src",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_security-0:2.9.3-32.el7jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el7jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_security-0:2.9.3-32.el7jbcs.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_security-debuginfo-0:2.9.3-32.el7jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.3-32.el7jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_security-debuginfo-0:2.9.3-32.el7jbcs.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_session-0:2.4.57-7.el7jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-mod_session-0:2.4.57-7.el7jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_session-0:2.4.57-7.el7jbcs.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_ssl-1:2.4.57-7.el7jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.57-7.el7jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_ssl-1:2.4.57-7.el7jbcs.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-openssl-1:1.1.1k-16.el7jbcs.src as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el7jbcs.src"
        },
        "product_reference": "jbcs-httpd24-openssl-1:1.1.1k-16.el7jbcs.src",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-openssl-1:1.1.1k-16.el7jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el7jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-openssl-1:1.1.1k-16.el7jbcs.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-openssl-chil-0:1.0.0-19.el7jbcs.src as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el7jbcs.src"
        },
        "product_reference": "jbcs-httpd24-openssl-chil-0:1.0.0-19.el7jbcs.src",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-openssl-chil-0:1.0.0-19.el7jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el7jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-openssl-chil-0:1.0.0-19.el7jbcs.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-openssl-chil-debuginfo-0:1.0.0-19.el7jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-openssl-chil-debuginfo-0:1.0.0-19.el7jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-openssl-chil-debuginfo-0:1.0.0-19.el7jbcs.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-openssl-debuginfo-1:1.1.1k-16.el7jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-openssl-debuginfo-1:1.1.1k-16.el7jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-openssl-debuginfo-1:1.1.1k-16.el7jbcs.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-openssl-devel-1:1.1.1k-16.el7jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-openssl-devel-1:1.1.1k-16.el7jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-openssl-devel-1:1.1.1k-16.el7jbcs.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-openssl-libs-1:1.1.1k-16.el7jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-openssl-libs-1:1.1.1k-16.el7jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-openssl-libs-1:1.1.1k-16.el7jbcs.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-openssl-perl-1:1.1.1k-16.el7jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-openssl-perl-1:1.1.1k-16.el7jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-openssl-perl-1:1.1.1k-16.el7jbcs.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el7jbcs.src as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el7jbcs.src"
        },
        "product_reference": "jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el7jbcs.src",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el7jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el7jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el7jbcs.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-34.el7jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-34.el7jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-34.el7jbcs.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-openssl-static-1:1.1.1k-16.el7jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 7 Server",
          "product_id": "7Server-JBCS:jbcs-httpd24-openssl-static-1:1.1.1k-16.el7jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-openssl-static-1:1.1.1k-16.el7jbcs.x86_64",
        "relates_to_product_reference": "7Server-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-apr-util-0:1.6.1-103.el8jbcs.src as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el8jbcs.src"
        },
        "product_reference": "jbcs-httpd24-apr-util-0:1.6.1-103.el8jbcs.src",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-apr-util-0:1.6.1-103.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-apr-util-0:1.6.1-103.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-apr-util-debuginfo-0:1.6.1-103.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-apr-util-debuginfo-0:1.6.1-103.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-apr-util-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-apr-util-devel-0:1.6.1-103.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-apr-util-devel-0:1.6.1-103.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-apr-util-devel-0:1.6.1-103.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-apr-util-ldap-0:1.6.1-103.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-apr-util-ldap-0:1.6.1-103.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-apr-util-ldap-0:1.6.1-103.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-apr-util-ldap-debuginfo-0:1.6.1-103.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-apr-util-ldap-debuginfo-0:1.6.1-103.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-apr-util-ldap-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-apr-util-mysql-0:1.6.1-103.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-apr-util-mysql-0:1.6.1-103.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-apr-util-mysql-0:1.6.1-103.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-apr-util-mysql-debuginfo-0:1.6.1-103.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-apr-util-mysql-debuginfo-0:1.6.1-103.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-apr-util-mysql-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-apr-util-nss-0:1.6.1-103.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-apr-util-nss-0:1.6.1-103.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-apr-util-nss-0:1.6.1-103.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-apr-util-nss-debuginfo-0:1.6.1-103.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-apr-util-nss-debuginfo-0:1.6.1-103.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-apr-util-nss-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-apr-util-odbc-0:1.6.1-103.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-apr-util-odbc-0:1.6.1-103.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-apr-util-odbc-0:1.6.1-103.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-apr-util-odbc-debuginfo-0:1.6.1-103.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-apr-util-odbc-debuginfo-0:1.6.1-103.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-apr-util-odbc-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-apr-util-openssl-0:1.6.1-103.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-apr-util-openssl-0:1.6.1-103.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-apr-util-openssl-0:1.6.1-103.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-apr-util-openssl-debuginfo-0:1.6.1-103.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-apr-util-openssl-debuginfo-0:1.6.1-103.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-apr-util-openssl-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-apr-util-pgsql-0:1.6.1-103.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-apr-util-pgsql-0:1.6.1-103.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-apr-util-pgsql-0:1.6.1-103.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-apr-util-pgsql-debuginfo-0:1.6.1-103.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-apr-util-pgsql-debuginfo-0:1.6.1-103.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-apr-util-pgsql-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-apr-util-sqlite-0:1.6.1-103.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-apr-util-sqlite-0:1.6.1-103.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-apr-util-sqlite-0:1.6.1-103.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-apr-util-sqlite-debuginfo-0:1.6.1-103.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-apr-util-sqlite-debuginfo-0:1.6.1-103.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-apr-util-sqlite-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-curl-0:8.4.0-2.el8jbcs.src as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el8jbcs.src"
        },
        "product_reference": "jbcs-httpd24-curl-0:8.4.0-2.el8jbcs.src",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-curl-0:8.4.0-2.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-curl-0:8.4.0-2.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-curl-debuginfo-0:8.4.0-2.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-curl-debuginfo-0:8.4.0-2.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-curl-debuginfo-0:8.4.0-2.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-httpd-0:2.4.57-7.el8jbcs.src as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el8jbcs.src"
        },
        "product_reference": "jbcs-httpd24-httpd-0:2.4.57-7.el8jbcs.src",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-httpd-0:2.4.57-7.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-httpd-0:2.4.57-7.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-httpd-debuginfo-0:2.4.57-7.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.57-7.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-httpd-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-httpd-devel-0:2.4.57-7.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-httpd-devel-0:2.4.57-7.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-httpd-devel-0:2.4.57-7.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-httpd-manual-0:2.4.57-7.el8jbcs.noarch as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-httpd-manual-0:2.4.57-7.el8jbcs.noarch"
        },
        "product_reference": "jbcs-httpd24-httpd-manual-0:2.4.57-7.el8jbcs.noarch",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-httpd-selinux-0:2.4.57-7.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.57-7.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-httpd-selinux-0:2.4.57-7.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-httpd-tools-0:2.4.57-7.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-httpd-tools-0:2.4.57-7.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-httpd-tools-0:2.4.57-7.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-httpd-tools-debuginfo-0:2.4.57-7.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-httpd-tools-debuginfo-0:2.4.57-7.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-httpd-tools-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-libcurl-0:8.4.0-2.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-libcurl-0:8.4.0-2.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-libcurl-0:8.4.0-2.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-libcurl-debuginfo-0:8.4.0-2.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-libcurl-debuginfo-0:8.4.0-2.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-libcurl-debuginfo-0:8.4.0-2.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-libcurl-devel-0:8.4.0-2.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-libcurl-devel-0:8.4.0-2.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-libcurl-devel-0:8.4.0-2.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_http2-0:1.15.19-32.el8jbcs.src as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el8jbcs.src"
        },
        "product_reference": "jbcs-httpd24-mod_http2-0:1.15.19-32.el8jbcs.src",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_http2-0:1.15.19-32.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_http2-0:1.15.19-32.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_http2-debuginfo-0:1.15.19-32.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.19-32.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_http2-debuginfo-0:1.15.19-32.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_jk-0:1.2.49-1.redhat_1.el8jbcs.src as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-mod_jk-0:1.2.49-1.redhat_1.el8jbcs.src"
        },
        "product_reference": "jbcs-httpd24-mod_jk-0:1.2.49-1.redhat_1.el8jbcs.src",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_jk-ap24-0:1.2.49-1.redhat_1.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.49-1.redhat_1.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_jk-ap24-0:1.2.49-1.redhat_1.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_jk-ap24-debuginfo-0:1.2.49-1.redhat_1.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-mod_jk-ap24-debuginfo-0:1.2.49-1.redhat_1.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_jk-ap24-debuginfo-0:1.2.49-1.redhat_1.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_ldap-0:2.4.57-7.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-mod_ldap-0:2.4.57-7.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_ldap-0:2.4.57-7.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_ldap-debuginfo-0:2.4.57-7.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-mod_ldap-debuginfo-0:2.4.57-7.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_ldap-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_md-1:2.4.24-2.el8jbcs.src as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el8jbcs.src"
        },
        "product_reference": "jbcs-httpd24-mod_md-1:2.4.24-2.el8jbcs.src",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_md-1:2.4.24-2.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_md-1:2.4.24-2.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_md-debuginfo-1:2.4.24-2.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.4.24-2.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_md-debuginfo-1:2.4.24-2.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el8jbcs.src as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el8jbcs.src"
        },
        "product_reference": "jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el8jbcs.src",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_proxy_cluster-debuginfo-0:1.3.19-7.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-mod_proxy_cluster-debuginfo-0:1.3.19-7.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_proxy_cluster-debuginfo-0:1.3.19-7.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_proxy_html-1:2.4.57-7.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.57-7.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_proxy_html-1:2.4.57-7.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_proxy_html-debuginfo-1:2.4.57-7.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-mod_proxy_html-debuginfo-1:2.4.57-7.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_proxy_html-debuginfo-1:2.4.57-7.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_security-0:2.9.3-32.el8jbcs.src as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el8jbcs.src"
        },
        "product_reference": "jbcs-httpd24-mod_security-0:2.9.3-32.el8jbcs.src",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_security-0:2.9.3-32.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_security-0:2.9.3-32.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_security-debuginfo-0:2.9.3-32.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.3-32.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_security-debuginfo-0:2.9.3-32.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_session-0:2.4.57-7.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-mod_session-0:2.4.57-7.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_session-0:2.4.57-7.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_session-debuginfo-0:2.4.57-7.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-mod_session-debuginfo-0:2.4.57-7.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_session-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_ssl-1:2.4.57-7.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-mod_ssl-1:2.4.57-7.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_ssl-1:2.4.57-7.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-mod_ssl-debuginfo-1:2.4.57-7.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-mod_ssl-debuginfo-1:2.4.57-7.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-mod_ssl-debuginfo-1:2.4.57-7.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-openssl-1:1.1.1k-16.el8jbcs.src as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el8jbcs.src"
        },
        "product_reference": "jbcs-httpd24-openssl-1:1.1.1k-16.el8jbcs.src",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-openssl-1:1.1.1k-16.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-openssl-1:1.1.1k-16.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-openssl-chil-0:1.0.0-19.el8jbcs.src as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el8jbcs.src"
        },
        "product_reference": "jbcs-httpd24-openssl-chil-0:1.0.0-19.el8jbcs.src",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-openssl-chil-0:1.0.0-19.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-openssl-chil-0:1.0.0-19.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-openssl-chil-debuginfo-0:1.0.0-19.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-openssl-chil-debuginfo-0:1.0.0-19.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-openssl-chil-debuginfo-0:1.0.0-19.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-openssl-debuginfo-1:1.1.1k-16.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-openssl-debuginfo-1:1.1.1k-16.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-openssl-debuginfo-1:1.1.1k-16.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-openssl-devel-1:1.1.1k-16.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-openssl-devel-1:1.1.1k-16.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-openssl-devel-1:1.1.1k-16.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-openssl-libs-1:1.1.1k-16.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-openssl-libs-1:1.1.1k-16.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-openssl-libs-1:1.1.1k-16.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-openssl-libs-debuginfo-1:1.1.1k-16.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-openssl-libs-debuginfo-1:1.1.1k-16.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-openssl-libs-debuginfo-1:1.1.1k-16.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-openssl-perl-1:1.1.1k-16.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-openssl-perl-1:1.1.1k-16.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-openssl-perl-1:1.1.1k-16.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el8jbcs.src as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el8jbcs.src"
        },
        "product_reference": "jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el8jbcs.src",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-34.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-34.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-34.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "jbcs-httpd24-openssl-static-1:1.1.1k-16.el8jbcs.x86_64 as a component of Red Hat JBoss Core Services on RHEL 8",
          "product_id": "8Base-JBCS:jbcs-httpd24-openssl-static-1:1.1.1k-16.el8jbcs.x86_64"
        },
        "product_reference": "jbcs-httpd24-openssl-static-1:1.1.1k-16.el8jbcs.x86_64",
        "relates_to_product_reference": "8Base-JBCS"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2023-0464",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "discovery_date": "2023-03-23T00:00:00+00:00",
      "flags": [
        {
          "label": "vulnerable_code_not_present",
          "product_ids": [
            "7Server-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-debuginfo-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-devel-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-ldap-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-mysql-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-nss-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-odbc-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-openssl-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-pgsql-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-sqlite-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-curl-debuginfo-0:8.4.0-2.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.57-7.el7jbcs.noarch",
            "7Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-libcurl-0:8.4.0-2.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-libcurl-devel-0:8.4.0-2.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.19-32.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.49-1.redhat_1.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.49-1.redhat_1.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.49-1.redhat_1.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.4.24-2.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_proxy_cluster-debuginfo-0:1.3.19-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.3-32.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_session-0:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-chil-debuginfo-0:1.0.0-19.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-34.el7jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-devel-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-ldap-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-ldap-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-mysql-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-mysql-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-nss-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-nss-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-odbc-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-odbc-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-openssl-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-openssl-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-pgsql-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-pgsql-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-sqlite-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-sqlite-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-curl-debuginfo-0:8.4.0-2.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-httpd-devel-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-httpd-manual-0:2.4.57-7.el8jbcs.noarch",
            "8Base-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-httpd-tools-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-httpd-tools-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-libcurl-0:8.4.0-2.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-libcurl-debuginfo-0:8.4.0-2.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-libcurl-devel-0:8.4.0-2.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.19-32.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_jk-0:1.2.49-1.redhat_1.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.49-1.redhat_1.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_jk-ap24-debuginfo-0:1.2.49-1.redhat_1.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_ldap-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_ldap-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.4.24-2.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_proxy_cluster-debuginfo-0:1.3.19-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_proxy_html-debuginfo-1:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.3-32.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_session-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_session-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_ssl-1:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_ssl-debuginfo-1:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-chil-debuginfo-0:1.0.0-19.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-34.el8jbcs.x86_64"
          ]
        }
      ],
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "2181082"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "A security vulnerability has been identified in all supported OpenSSL versions related to verifying X.509 certificate chains that include policy constraints. This flaw allows attackers to exploit this vulnerability by creating a malicious certificate chain that triggers exponential use of computational resources, leading to a denial of service (DoS) attack on affected systems. Policy processing is disabled by default but can be enabled by passing the -policy\u0027 argument to the command line utilities or calling the X509_VERIFY_PARAM_set1_policies()\u0027 function.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "openssl: Denial of service by excessive resource usage in verifying X509 policy constraints",
          "title": "Vulnerability summary"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "7Server-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-debuginfo-1:1.1.1k-16.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-devel-1:1.1.1k-16.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-libs-1:1.1.1k-16.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-perl-1:1.1.1k-16.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-static-1:1.1.1k-16.el7jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-debuginfo-1:1.1.1k-16.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-devel-1:1.1.1k-16.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-libs-1:1.1.1k-16.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-libs-debuginfo-1:1.1.1k-16.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-perl-1:1.1.1k-16.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-static-1:1.1.1k-16.el8jbcs.x86_64"
        ],
        "known_not_affected": [
          "7Server-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-debuginfo-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-devel-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-ldap-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-mysql-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-nss-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-odbc-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-openssl-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-pgsql-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-sqlite-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-curl-debuginfo-0:8.4.0-2.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.57-7.el7jbcs.noarch",
          "7Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-libcurl-0:8.4.0-2.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-libcurl-devel-0:8.4.0-2.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.19-32.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.49-1.redhat_1.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.49-1.redhat_1.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.49-1.redhat_1.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.4.24-2.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_proxy_cluster-debuginfo-0:1.3.19-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.3-32.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_session-0:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-chil-debuginfo-0:1.0.0-19.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-34.el7jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-devel-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-ldap-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-ldap-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-mysql-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-mysql-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-nss-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-nss-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-odbc-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-odbc-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-openssl-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-openssl-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-pgsql-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-pgsql-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-sqlite-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-sqlite-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-curl-debuginfo-0:8.4.0-2.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-httpd-devel-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-httpd-manual-0:2.4.57-7.el8jbcs.noarch",
          "8Base-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-httpd-tools-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-httpd-tools-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-libcurl-0:8.4.0-2.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-libcurl-debuginfo-0:8.4.0-2.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-libcurl-devel-0:8.4.0-2.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.19-32.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_jk-0:1.2.49-1.redhat_1.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.49-1.redhat_1.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_jk-ap24-debuginfo-0:1.2.49-1.redhat_1.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_ldap-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_ldap-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.4.24-2.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_proxy_cluster-debuginfo-0:1.3.19-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_proxy_html-debuginfo-1:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.3-32.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_session-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_session-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_ssl-1:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_ssl-debuginfo-1:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-chil-debuginfo-0:1.0.0-19.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-34.el8jbcs.x86_64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2023-0464"
        },
        {
          "category": "external",
          "summary": "RHBZ#2181082",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=2181082"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2023-0464",
          "url": "https://www.cve.org/CVERecord?id=CVE-2023-0464"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2023-0464",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2023-0464"
        },
        {
          "category": "external",
          "summary": "https://www.openssl.org/news/secadv/20230322.txt",
          "url": "https://www.openssl.org/news/secadv/20230322.txt"
        }
      ],
      "release_date": "2023-03-22T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2023-12-07T13:53:38+00:00",
          "details": "Before applying this update, make sure all previously released errata relevant to your system have been applied.\n\nFor details on how to apply this update, refer to:\n\nhttps://access.redhat.com/articles/11258",
          "product_ids": [
            "7Server-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-debuginfo-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-devel-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-libs-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-perl-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-static-1:1.1.1k-16.el7jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-debuginfo-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-devel-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-libs-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-libs-debuginfo-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-perl-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-static-1:1.1.1k-16.el8jbcs.x86_64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2023:7625"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "HIGH",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "7Server-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-debuginfo-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-devel-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-libs-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-perl-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-static-1:1.1.1k-16.el7jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-debuginfo-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-devel-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-libs-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-libs-debuginfo-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-perl-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-static-1:1.1.1k-16.el8jbcs.x86_64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Low"
        }
      ],
      "title": "openssl: Denial of service by excessive resource usage in verifying X509 policy constraints"
    },
    {
      "cve": "CVE-2023-0465",
      "discovery_date": "2023-03-29T00:00:00+00:00",
      "flags": [
        {
          "label": "vulnerable_code_not_present",
          "product_ids": [
            "7Server-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-debuginfo-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-devel-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-ldap-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-mysql-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-nss-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-odbc-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-openssl-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-pgsql-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-sqlite-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-curl-debuginfo-0:8.4.0-2.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.57-7.el7jbcs.noarch",
            "7Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-libcurl-0:8.4.0-2.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-libcurl-devel-0:8.4.0-2.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.19-32.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.49-1.redhat_1.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.49-1.redhat_1.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.49-1.redhat_1.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.4.24-2.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_proxy_cluster-debuginfo-0:1.3.19-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.3-32.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_session-0:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-chil-debuginfo-0:1.0.0-19.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-34.el7jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-devel-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-ldap-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-ldap-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-mysql-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-mysql-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-nss-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-nss-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-odbc-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-odbc-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-openssl-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-openssl-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-pgsql-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-pgsql-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-sqlite-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-sqlite-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-curl-debuginfo-0:8.4.0-2.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-httpd-devel-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-httpd-manual-0:2.4.57-7.el8jbcs.noarch",
            "8Base-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-httpd-tools-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-httpd-tools-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-libcurl-0:8.4.0-2.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-libcurl-debuginfo-0:8.4.0-2.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-libcurl-devel-0:8.4.0-2.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.19-32.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_jk-0:1.2.49-1.redhat_1.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.49-1.redhat_1.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_jk-ap24-debuginfo-0:1.2.49-1.redhat_1.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_ldap-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_ldap-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.4.24-2.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_proxy_cluster-debuginfo-0:1.3.19-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_proxy_html-debuginfo-1:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.3-32.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_session-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_session-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_ssl-1:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_ssl-debuginfo-1:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-chil-debuginfo-0:1.0.0-19.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-34.el8jbcs.x86_64"
          ]
        }
      ],
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "2182561"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "A flaw was found in OpenSSL. Applications that use a non-default option when verifying certificates may be vulnerable to an attack from a malicious CA to circumvent certain checks. OpenSSL and other certificate policy checks silently ignore invalid certificate policies in leaf certificates that are skipped for that certificate. A malicious CA could use this to deliberately assert invalid certificate policies to circumvent policy checking on the certificate altogether. Policy processing is disabled by default but can be enabled by passing the `-policy\u0027 argument to the command line utilities or by calling the `X509_VERIFY_PARAM_set1_policies()\u0027 function.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "openssl: Invalid certificate policies in leaf certificates are silently ignored",
          "title": "Vulnerability summary"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "7Server-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-debuginfo-1:1.1.1k-16.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-devel-1:1.1.1k-16.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-libs-1:1.1.1k-16.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-perl-1:1.1.1k-16.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-static-1:1.1.1k-16.el7jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-debuginfo-1:1.1.1k-16.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-devel-1:1.1.1k-16.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-libs-1:1.1.1k-16.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-libs-debuginfo-1:1.1.1k-16.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-perl-1:1.1.1k-16.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-static-1:1.1.1k-16.el8jbcs.x86_64"
        ],
        "known_not_affected": [
          "7Server-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-debuginfo-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-devel-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-ldap-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-mysql-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-nss-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-odbc-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-openssl-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-pgsql-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-sqlite-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-curl-debuginfo-0:8.4.0-2.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.57-7.el7jbcs.noarch",
          "7Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-libcurl-0:8.4.0-2.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-libcurl-devel-0:8.4.0-2.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.19-32.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.49-1.redhat_1.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.49-1.redhat_1.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.49-1.redhat_1.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.4.24-2.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_proxy_cluster-debuginfo-0:1.3.19-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.3-32.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_session-0:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-chil-debuginfo-0:1.0.0-19.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-34.el7jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-devel-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-ldap-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-ldap-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-mysql-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-mysql-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-nss-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-nss-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-odbc-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-odbc-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-openssl-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-openssl-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-pgsql-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-pgsql-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-sqlite-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-sqlite-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-curl-debuginfo-0:8.4.0-2.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-httpd-devel-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-httpd-manual-0:2.4.57-7.el8jbcs.noarch",
          "8Base-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-httpd-tools-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-httpd-tools-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-libcurl-0:8.4.0-2.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-libcurl-debuginfo-0:8.4.0-2.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-libcurl-devel-0:8.4.0-2.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.19-32.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_jk-0:1.2.49-1.redhat_1.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.49-1.redhat_1.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_jk-ap24-debuginfo-0:1.2.49-1.redhat_1.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_ldap-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_ldap-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.4.24-2.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_proxy_cluster-debuginfo-0:1.3.19-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_proxy_html-debuginfo-1:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.3-32.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_session-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_session-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_ssl-1:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_ssl-debuginfo-1:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-chil-debuginfo-0:1.0.0-19.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-34.el8jbcs.x86_64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2023-0465"
        },
        {
          "category": "external",
          "summary": "RHBZ#2182561",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=2182561"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2023-0465",
          "url": "https://www.cve.org/CVERecord?id=CVE-2023-0465"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2023-0465",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2023-0465"
        },
        {
          "category": "external",
          "summary": "https://www.openssl.org/news/secadv/20230328.txt",
          "url": "https://www.openssl.org/news/secadv/20230328.txt"
        }
      ],
      "release_date": "2023-03-28T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2023-12-07T13:53:38+00:00",
          "details": "Before applying this update, make sure all previously released errata relevant to your system have been applied.\n\nFor details on how to apply this update, refer to:\n\nhttps://access.redhat.com/articles/11258",
          "product_ids": [
            "7Server-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-debuginfo-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-devel-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-libs-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-perl-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-static-1:1.1.1k-16.el7jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-debuginfo-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-devel-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-libs-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-libs-debuginfo-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-perl-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-static-1:1.1.1k-16.el8jbcs.x86_64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2023:7625"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "NONE",
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "NONE",
            "integrityImpact": "LOW",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "7Server-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-debuginfo-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-devel-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-libs-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-perl-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-static-1:1.1.1k-16.el7jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-debuginfo-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-devel-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-libs-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-libs-debuginfo-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-perl-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-static-1:1.1.1k-16.el8jbcs.x86_64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Low"
        }
      ],
      "title": "openssl: Invalid certificate policies in leaf certificates are silently ignored"
    },
    {
      "cve": "CVE-2023-0466",
      "discovery_date": "2023-03-29T00:00:00+00:00",
      "flags": [
        {
          "label": "vulnerable_code_not_present",
          "product_ids": [
            "7Server-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-debuginfo-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-devel-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-ldap-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-mysql-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-nss-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-odbc-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-openssl-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-pgsql-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-sqlite-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-curl-debuginfo-0:8.4.0-2.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.57-7.el7jbcs.noarch",
            "7Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-libcurl-0:8.4.0-2.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-libcurl-devel-0:8.4.0-2.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.19-32.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.49-1.redhat_1.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.49-1.redhat_1.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.49-1.redhat_1.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.4.24-2.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_proxy_cluster-debuginfo-0:1.3.19-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.3-32.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_session-0:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-chil-debuginfo-0:1.0.0-19.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-34.el7jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-devel-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-ldap-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-ldap-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-mysql-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-mysql-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-nss-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-nss-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-odbc-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-odbc-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-openssl-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-openssl-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-pgsql-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-pgsql-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-sqlite-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-sqlite-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-curl-debuginfo-0:8.4.0-2.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-httpd-devel-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-httpd-manual-0:2.4.57-7.el8jbcs.noarch",
            "8Base-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-httpd-tools-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-httpd-tools-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-libcurl-0:8.4.0-2.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-libcurl-debuginfo-0:8.4.0-2.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-libcurl-devel-0:8.4.0-2.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.19-32.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_jk-0:1.2.49-1.redhat_1.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.49-1.redhat_1.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_jk-ap24-debuginfo-0:1.2.49-1.redhat_1.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_ldap-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_ldap-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.4.24-2.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_proxy_cluster-debuginfo-0:1.3.19-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_proxy_html-debuginfo-1:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.3-32.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_session-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_session-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_ssl-1:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_ssl-debuginfo-1:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-chil-debuginfo-0:1.0.0-19.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-34.el8jbcs.x86_64"
          ]
        }
      ],
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "2182565"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "A flaw was found in OpenSSL. The X509_VERIFY_PARAM_add0_policy() function is documented to enable the certificate policy check when doing certificate verification implicitly. However, implementing the function does not enable the check, allowing certificates with invalid or incorrect policies to pass the certificate verification. Suddenly enabling the policy check could break existing deployments, so it was decided to keep the existing behavior of the X509_VERIFY_PARAM_add0_policy() function. The applications that require OpenSSL to perform certificate policy check need to use X509_VERIFY_PARAM_set1_policies() or explicitly enable the policy check by calling X509_VERIFY_PARAM_set_flags() with the X509_V_FLAG_POLICY_CHECK flag argument. Certificate policy checks are disabled by default in OpenSSL and are not commonly used by applications.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "openssl: Certificate policy check not enabled",
          "title": "Vulnerability summary"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "7Server-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-debuginfo-1:1.1.1k-16.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-devel-1:1.1.1k-16.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-libs-1:1.1.1k-16.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-perl-1:1.1.1k-16.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-static-1:1.1.1k-16.el7jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-debuginfo-1:1.1.1k-16.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-devel-1:1.1.1k-16.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-libs-1:1.1.1k-16.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-libs-debuginfo-1:1.1.1k-16.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-perl-1:1.1.1k-16.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-static-1:1.1.1k-16.el8jbcs.x86_64"
        ],
        "known_not_affected": [
          "7Server-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-debuginfo-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-devel-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-ldap-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-mysql-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-nss-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-odbc-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-openssl-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-pgsql-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-sqlite-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-curl-debuginfo-0:8.4.0-2.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.57-7.el7jbcs.noarch",
          "7Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-libcurl-0:8.4.0-2.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-libcurl-devel-0:8.4.0-2.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.19-32.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.49-1.redhat_1.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.49-1.redhat_1.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.49-1.redhat_1.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.4.24-2.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_proxy_cluster-debuginfo-0:1.3.19-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.3-32.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_session-0:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-chil-debuginfo-0:1.0.0-19.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-34.el7jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-devel-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-ldap-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-ldap-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-mysql-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-mysql-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-nss-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-nss-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-odbc-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-odbc-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-openssl-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-openssl-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-pgsql-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-pgsql-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-sqlite-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-sqlite-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-curl-debuginfo-0:8.4.0-2.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-httpd-devel-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-httpd-manual-0:2.4.57-7.el8jbcs.noarch",
          "8Base-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-httpd-tools-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-httpd-tools-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-libcurl-0:8.4.0-2.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-libcurl-debuginfo-0:8.4.0-2.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-libcurl-devel-0:8.4.0-2.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.19-32.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_jk-0:1.2.49-1.redhat_1.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.49-1.redhat_1.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_jk-ap24-debuginfo-0:1.2.49-1.redhat_1.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_ldap-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_ldap-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.4.24-2.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_proxy_cluster-debuginfo-0:1.3.19-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_proxy_html-debuginfo-1:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.3-32.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_session-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_session-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_ssl-1:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_ssl-debuginfo-1:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-chil-debuginfo-0:1.0.0-19.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-34.el8jbcs.x86_64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2023-0466"
        },
        {
          "category": "external",
          "summary": "RHBZ#2182565",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=2182565"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2023-0466",
          "url": "https://www.cve.org/CVERecord?id=CVE-2023-0466"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2023-0466",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2023-0466"
        },
        {
          "category": "external",
          "summary": "https://www.openssl.org/news/secadv/20230328.txt",
          "url": "https://www.openssl.org/news/secadv/20230328.txt"
        }
      ],
      "release_date": "2023-03-28T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2023-12-07T13:53:38+00:00",
          "details": "Before applying this update, make sure all previously released errata relevant to your system have been applied.\n\nFor details on how to apply this update, refer to:\n\nhttps://access.redhat.com/articles/11258",
          "product_ids": [
            "7Server-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-debuginfo-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-devel-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-libs-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-perl-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-static-1:1.1.1k-16.el7jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-debuginfo-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-devel-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-libs-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-libs-debuginfo-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-perl-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-static-1:1.1.1k-16.el8jbcs.x86_64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2023:7625"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "NONE",
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "NONE",
            "integrityImpact": "LOW",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "7Server-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-debuginfo-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-devel-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-libs-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-perl-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-static-1:1.1.1k-16.el7jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-debuginfo-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-devel-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-libs-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-libs-debuginfo-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-perl-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-static-1:1.1.1k-16.el8jbcs.x86_64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Low"
        }
      ],
      "title": "openssl: Certificate policy check not enabled"
    },
    {
      "cve": "CVE-2023-2650",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "discovery_date": "2023-05-17T00:00:00+00:00",
      "flags": [
        {
          "label": "vulnerable_code_not_present",
          "product_ids": [
            "7Server-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-debuginfo-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-devel-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-ldap-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-mysql-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-nss-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-odbc-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-openssl-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-pgsql-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-sqlite-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-curl-debuginfo-0:8.4.0-2.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.57-7.el7jbcs.noarch",
            "7Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-libcurl-0:8.4.0-2.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-libcurl-devel-0:8.4.0-2.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.19-32.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.49-1.redhat_1.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.49-1.redhat_1.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.49-1.redhat_1.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.4.24-2.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_proxy_cluster-debuginfo-0:1.3.19-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.3-32.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_session-0:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-chil-debuginfo-0:1.0.0-19.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-34.el7jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-devel-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-ldap-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-ldap-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-mysql-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-mysql-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-nss-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-nss-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-odbc-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-odbc-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-openssl-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-openssl-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-pgsql-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-pgsql-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-sqlite-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-sqlite-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-curl-debuginfo-0:8.4.0-2.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-httpd-devel-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-httpd-manual-0:2.4.57-7.el8jbcs.noarch",
            "8Base-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-httpd-tools-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-httpd-tools-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-libcurl-0:8.4.0-2.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-libcurl-debuginfo-0:8.4.0-2.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-libcurl-devel-0:8.4.0-2.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.19-32.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_jk-0:1.2.49-1.redhat_1.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.49-1.redhat_1.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_jk-ap24-debuginfo-0:1.2.49-1.redhat_1.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_ldap-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_ldap-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.4.24-2.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_proxy_cluster-debuginfo-0:1.3.19-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_proxy_html-debuginfo-1:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.3-32.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_session-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_session-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_ssl-1:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_ssl-debuginfo-1:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-chil-debuginfo-0:1.0.0-19.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-34.el8jbcs.x86_64"
          ]
        }
      ],
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "2207947"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "A flaw was found in OpenSSL resulting in a possible denial of service while translating ASN.1 object identifiers. Applications that use OBJ_obj2txt() directly, or use any of the OpenSSL subsystems OCSP, PKCS7/SMIME, CMS, CMP/CRMF or TS with no message size limit may experience long delays when processing messages, which may lead to a denial of service.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "openssl: Possible DoS translating ASN.1 object identifiers",
          "title": "Vulnerability summary"
        },
        {
          "category": "other",
          "text": "CVE-2023-2650 can\u0027t cause DoS on machines with OpenSSL 1.1.1 and so is considered LOW for RHEL 8.",
          "title": "Statement"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "7Server-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-debuginfo-1:1.1.1k-16.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-devel-1:1.1.1k-16.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-libs-1:1.1.1k-16.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-perl-1:1.1.1k-16.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-static-1:1.1.1k-16.el7jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-debuginfo-1:1.1.1k-16.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-devel-1:1.1.1k-16.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-libs-1:1.1.1k-16.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-libs-debuginfo-1:1.1.1k-16.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-perl-1:1.1.1k-16.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-static-1:1.1.1k-16.el8jbcs.x86_64"
        ],
        "known_not_affected": [
          "7Server-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-debuginfo-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-devel-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-ldap-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-mysql-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-nss-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-odbc-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-openssl-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-pgsql-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-sqlite-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-curl-debuginfo-0:8.4.0-2.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.57-7.el7jbcs.noarch",
          "7Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-libcurl-0:8.4.0-2.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-libcurl-devel-0:8.4.0-2.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.19-32.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.49-1.redhat_1.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.49-1.redhat_1.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.49-1.redhat_1.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.4.24-2.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_proxy_cluster-debuginfo-0:1.3.19-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.3-32.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_session-0:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-chil-debuginfo-0:1.0.0-19.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-34.el7jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-devel-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-ldap-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-ldap-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-mysql-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-mysql-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-nss-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-nss-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-odbc-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-odbc-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-openssl-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-openssl-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-pgsql-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-pgsql-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-sqlite-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-sqlite-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-curl-debuginfo-0:8.4.0-2.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-httpd-devel-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-httpd-manual-0:2.4.57-7.el8jbcs.noarch",
          "8Base-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-httpd-tools-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-httpd-tools-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-libcurl-0:8.4.0-2.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-libcurl-debuginfo-0:8.4.0-2.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-libcurl-devel-0:8.4.0-2.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.19-32.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_jk-0:1.2.49-1.redhat_1.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.49-1.redhat_1.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_jk-ap24-debuginfo-0:1.2.49-1.redhat_1.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_ldap-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_ldap-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.4.24-2.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_proxy_cluster-debuginfo-0:1.3.19-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_proxy_html-debuginfo-1:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.3-32.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_session-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_session-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_ssl-1:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_ssl-debuginfo-1:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-chil-debuginfo-0:1.0.0-19.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-34.el8jbcs.x86_64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2023-2650"
        },
        {
          "category": "external",
          "summary": "RHBZ#2207947",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=2207947"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2023-2650",
          "url": "https://www.cve.org/CVERecord?id=CVE-2023-2650"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2023-2650",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2023-2650"
        },
        {
          "category": "external",
          "summary": "https://www.openssl.org/news/secadv/20230530.txt",
          "url": "https://www.openssl.org/news/secadv/20230530.txt"
        }
      ],
      "release_date": "2023-05-30T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2023-12-07T13:53:38+00:00",
          "details": "Before applying this update, make sure all previously released errata relevant to your system have been applied.\n\nFor details on how to apply this update, refer to:\n\nhttps://access.redhat.com/articles/11258",
          "product_ids": [
            "7Server-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-debuginfo-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-devel-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-libs-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-perl-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-static-1:1.1.1k-16.el7jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-debuginfo-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-devel-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-libs-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-libs-debuginfo-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-perl-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-static-1:1.1.1k-16.el8jbcs.x86_64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2023:7625"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "REQUIRED",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "7Server-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-debuginfo-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-devel-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-libs-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-perl-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-static-1:1.1.1k-16.el7jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-debuginfo-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-devel-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-libs-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-libs-debuginfo-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-perl-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-static-1:1.1.1k-16.el8jbcs.x86_64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Moderate"
        }
      ],
      "title": "openssl: Possible DoS translating ASN.1 object identifiers"
    },
    {
      "cve": "CVE-2023-3446",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "discovery_date": "2023-07-24T00:00:00+00:00",
      "flags": [
        {
          "label": "vulnerable_code_not_present",
          "product_ids": [
            "7Server-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-debuginfo-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-devel-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-ldap-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-mysql-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-nss-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-odbc-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-openssl-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-pgsql-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-sqlite-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-curl-debuginfo-0:8.4.0-2.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.57-7.el7jbcs.noarch",
            "7Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-libcurl-0:8.4.0-2.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-libcurl-devel-0:8.4.0-2.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.19-32.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.49-1.redhat_1.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.49-1.redhat_1.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.49-1.redhat_1.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.4.24-2.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_proxy_cluster-debuginfo-0:1.3.19-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.3-32.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_session-0:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-chil-debuginfo-0:1.0.0-19.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-34.el7jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-devel-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-ldap-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-ldap-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-mysql-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-mysql-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-nss-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-nss-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-odbc-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-odbc-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-openssl-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-openssl-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-pgsql-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-pgsql-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-sqlite-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-sqlite-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-curl-debuginfo-0:8.4.0-2.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-httpd-devel-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-httpd-manual-0:2.4.57-7.el8jbcs.noarch",
            "8Base-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-httpd-tools-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-httpd-tools-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-libcurl-0:8.4.0-2.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-libcurl-debuginfo-0:8.4.0-2.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-libcurl-devel-0:8.4.0-2.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.19-32.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_jk-0:1.2.49-1.redhat_1.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.49-1.redhat_1.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_jk-ap24-debuginfo-0:1.2.49-1.redhat_1.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_ldap-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_ldap-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.4.24-2.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_proxy_cluster-debuginfo-0:1.3.19-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_proxy_html-debuginfo-1:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.3-32.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_session-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_session-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_ssl-1:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_ssl-debuginfo-1:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-chil-debuginfo-0:1.0.0-19.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-34.el8jbcs.x86_64"
          ]
        }
      ],
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "2224962"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "A vulnerability was found in OpenSSL. This security flaw occurs because the applications that use the DH_check(), DH_check_ex(), or EVP_PKEY_param_check() functions to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source may lead to a denial of service.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "openssl: Excessive time spent checking DH keys and parameters",
          "title": "Vulnerability summary"
        },
        {
          "category": "other",
          "text": "The CVE-2023-3446 vulnerability in OpenSSL has been classified as having a low impact due to several factors. Firstly, while the potential for a Denial of Service (DoS) attack exists, it requires specific conditions to be met, notably the use of DH_check(), DH_check_ex(), or EVP_PKEY_param_check() functions with DH keys or parameters obtained from untrusted sources. Secondly, the issue primarily affects the efficiency of key and parameter checks, rather than directly compromising the security or integrity of cryptographic operations. Given these considerations and the absence of widespread exploitation or significant consequences beyond performance degradation, the overall impact of this vulnerability is deemed low rather than moderate.",
          "title": "Statement"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "7Server-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-debuginfo-1:1.1.1k-16.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-devel-1:1.1.1k-16.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-libs-1:1.1.1k-16.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-perl-1:1.1.1k-16.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-static-1:1.1.1k-16.el7jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-debuginfo-1:1.1.1k-16.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-devel-1:1.1.1k-16.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-libs-1:1.1.1k-16.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-libs-debuginfo-1:1.1.1k-16.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-perl-1:1.1.1k-16.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-static-1:1.1.1k-16.el8jbcs.x86_64"
        ],
        "known_not_affected": [
          "7Server-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-debuginfo-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-devel-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-ldap-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-mysql-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-nss-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-odbc-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-openssl-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-pgsql-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-sqlite-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-curl-debuginfo-0:8.4.0-2.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.57-7.el7jbcs.noarch",
          "7Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-libcurl-0:8.4.0-2.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-libcurl-devel-0:8.4.0-2.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.19-32.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.49-1.redhat_1.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.49-1.redhat_1.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.49-1.redhat_1.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.4.24-2.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_proxy_cluster-debuginfo-0:1.3.19-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.3-32.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_session-0:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-chil-debuginfo-0:1.0.0-19.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-34.el7jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-devel-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-ldap-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-ldap-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-mysql-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-mysql-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-nss-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-nss-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-odbc-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-odbc-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-openssl-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-openssl-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-pgsql-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-pgsql-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-sqlite-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-sqlite-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-curl-debuginfo-0:8.4.0-2.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-httpd-devel-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-httpd-manual-0:2.4.57-7.el8jbcs.noarch",
          "8Base-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-httpd-tools-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-httpd-tools-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-libcurl-0:8.4.0-2.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-libcurl-debuginfo-0:8.4.0-2.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-libcurl-devel-0:8.4.0-2.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.19-32.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_jk-0:1.2.49-1.redhat_1.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.49-1.redhat_1.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_jk-ap24-debuginfo-0:1.2.49-1.redhat_1.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_ldap-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_ldap-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.4.24-2.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_proxy_cluster-debuginfo-0:1.3.19-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_proxy_html-debuginfo-1:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.3-32.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_session-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_session-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_ssl-1:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-mod_ssl-debuginfo-1:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-chil-debuginfo-0:1.0.0-19.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-34.el8jbcs.x86_64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2023-3446"
        },
        {
          "category": "external",
          "summary": "RHBZ#2224962",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=2224962"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2023-3446",
          "url": "https://www.cve.org/CVERecord?id=CVE-2023-3446"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2023-3446",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2023-3446"
        },
        {
          "category": "external",
          "summary": "https://www.openssl.org/news/secadv/20230719.txt",
          "url": "https://www.openssl.org/news/secadv/20230719.txt"
        }
      ],
      "release_date": "2023-07-19T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2023-12-07T13:53:38+00:00",
          "details": "Before applying this update, make sure all previously released errata relevant to your system have been applied.\n\nFor details on how to apply this update, refer to:\n\nhttps://access.redhat.com/articles/11258",
          "product_ids": [
            "7Server-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-debuginfo-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-devel-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-libs-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-perl-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-static-1:1.1.1k-16.el7jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-debuginfo-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-devel-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-libs-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-libs-debuginfo-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-perl-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-static-1:1.1.1k-16.el8jbcs.x86_64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2023:7625"
        },
        {
          "category": "workaround",
          "details": "Mitigation for this issue is either not available or the currently available options do not meet the Red Hat Product Security criteria comprising ease of use and deployment, applicability to widespread installation base or stability.",
          "product_ids": [
            "7Server-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-debuginfo-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-devel-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-ldap-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-mysql-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-nss-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-odbc-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-openssl-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-pgsql-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-sqlite-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-curl-debuginfo-0:8.4.0-2.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.57-7.el7jbcs.noarch",
            "7Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-libcurl-0:8.4.0-2.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-libcurl-devel-0:8.4.0-2.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.19-32.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.49-1.redhat_1.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.49-1.redhat_1.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.49-1.redhat_1.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.4.24-2.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_proxy_cluster-debuginfo-0:1.3.19-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.3-32.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_session-0:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-chil-debuginfo-0:1.0.0-19.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-debuginfo-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-devel-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-libs-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-perl-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-34.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-static-1:1.1.1k-16.el7jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-devel-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-ldap-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-ldap-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-mysql-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-mysql-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-nss-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-nss-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-odbc-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-odbc-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-openssl-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-openssl-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-pgsql-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-pgsql-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-sqlite-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-sqlite-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-curl-debuginfo-0:8.4.0-2.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-httpd-devel-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-httpd-manual-0:2.4.57-7.el8jbcs.noarch",
            "8Base-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-httpd-tools-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-httpd-tools-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-libcurl-0:8.4.0-2.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-libcurl-debuginfo-0:8.4.0-2.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-libcurl-devel-0:8.4.0-2.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.19-32.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_jk-0:1.2.49-1.redhat_1.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.49-1.redhat_1.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_jk-ap24-debuginfo-0:1.2.49-1.redhat_1.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_ldap-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_ldap-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.4.24-2.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_proxy_cluster-debuginfo-0:1.3.19-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_proxy_html-debuginfo-1:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.3-32.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_session-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_session-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_ssl-1:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_ssl-debuginfo-1:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-chil-debuginfo-0:1.0.0-19.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-debuginfo-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-devel-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-libs-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-libs-debuginfo-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-perl-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-34.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-static-1:1.1.1k-16.el8jbcs.x86_64"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "LOW",
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "7Server-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-debuginfo-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-devel-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-libs-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-perl-1:1.1.1k-16.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-static-1:1.1.1k-16.el7jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-debuginfo-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-devel-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-libs-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-libs-debuginfo-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-perl-1:1.1.1k-16.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-static-1:1.1.1k-16.el8jbcs.x86_64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Low"
        }
      ],
      "title": "openssl: Excessive time spent checking DH keys and parameters"
    },
    {
      "cve": "CVE-2023-3817",
      "discovery_date": "2023-07-31T00:00:00+00:00",
      "flags": [
        {
          "label": "vulnerable_code_not_present",
          "product_ids": [
            "7Server-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-debuginfo-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-devel-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-ldap-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-mysql-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-nss-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-odbc-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-openssl-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-pgsql-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-apr-util-sqlite-0:1.6.1-103.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-curl-debuginfo-0:8.4.0-2.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.57-7.el7jbcs.noarch",
            "7Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-libcurl-0:8.4.0-2.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-libcurl-devel-0:8.4.0-2.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.19-32.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.49-1.redhat_1.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.49-1.redhat_1.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.49-1.redhat_1.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.4.24-2.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_proxy_cluster-debuginfo-0:1.3.19-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.3-32.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_session-0:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.57-7.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-chil-debuginfo-0:1.0.0-19.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el7jbcs.src",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el7jbcs.x86_64",
            "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-34.el7jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-devel-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-ldap-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-ldap-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-mysql-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-mysql-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-nss-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-nss-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-odbc-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-odbc-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-openssl-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-openssl-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-pgsql-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-pgsql-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-sqlite-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-apr-util-sqlite-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-curl-debuginfo-0:8.4.0-2.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-httpd-devel-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-httpd-manual-0:2.4.57-7.el8jbcs.noarch",
            "8Base-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-httpd-tools-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-httpd-tools-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-libcurl-0:8.4.0-2.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-libcurl-debuginfo-0:8.4.0-2.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-libcurl-devel-0:8.4.0-2.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.19-32.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_jk-0:1.2.49-1.redhat_1.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.49-1.redhat_1.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_jk-ap24-debuginfo-0:1.2.49-1.redhat_1.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_ldap-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_ldap-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.4.24-2.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_proxy_cluster-debuginfo-0:1.3.19-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_proxy_html-debuginfo-1:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.3-32.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_session-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_session-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_ssl-1:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-mod_ssl-debuginfo-1:2.4.57-7.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-chil-debuginfo-0:1.0.0-19.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el8jbcs.src",
            "8Base-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el8jbcs.x86_64",
            "8Base-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-34.el8jbcs.x86_64"
          ]
        }
      ],
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "2227852"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "A vulnerability was found in OpenSSL. This security issue occurs because the applications that use the DH_check(), DH_check_ex(), or EVP_PKEY_param_check() functions to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source may lead to a denial of service.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "OpenSSL: Excessive time spent checking DH q parameter value",
          "title": "Vulnerability summary"
        },
        {
          "category": "other",
          "text": "This vulnerability in OpenSSL is considered low severity primarily because it requires specific conditions to be exploited and has limited impact. While excessive computation time during DH parameter checks could potentially lead to denial of service (DoS) attacks, the likelihood of successful exploitation is relatively low. Additionally, the vulnerability mainly affects applications that use certain OpenSSL functions for DH parameter validation, rather than the broader SSL/TLS implementation.",
          "title": "Statement"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "7Server-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-debuginfo-1:1.1.1k-16.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-devel-1:1.1.1k-16.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-libs-1:1.1.1k-16.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-perl-1:1.1.1k-16.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-static-1:1.1.1k-16.el7jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-openssl-1:1.1.1k-16.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-debuginfo-1:1.1.1k-16.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-devel-1:1.1.1k-16.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-libs-1:1.1.1k-16.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-libs-debuginfo-1:1.1.1k-16.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-perl-1:1.1.1k-16.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-openssl-static-1:1.1.1k-16.el8jbcs.x86_64"
        ],
        "known_not_affected": [
          "7Server-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-debuginfo-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-devel-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-ldap-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-mysql-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-nss-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-odbc-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-openssl-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-pgsql-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-apr-util-sqlite-0:1.6.1-103.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-curl-debuginfo-0:8.4.0-2.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-devel-0:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-manual-0:2.4.57-7.el7jbcs.noarch",
          "7Server-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-httpd-tools-0:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-libcurl-0:8.4.0-2.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-libcurl-devel-0:8.4.0-2.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-mod_http2-0:1.15.19-32.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_http2-debuginfo-0:1.15.19-32.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_jk-0:1.2.49-1.redhat_1.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-mod_jk-ap24-0:1.2.49-1.redhat_1.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_jk-debuginfo-0:1.2.49-1.redhat_1.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_ldap-0:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-mod_md-1:2.4.24-2.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_md-debuginfo-1:2.4.24-2.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-mod_proxy_cluster-0:1.3.19-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_proxy_cluster-debuginfo-0:1.3.19-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_proxy_html-1:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-mod_security-0:2.9.3-32.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_security-debuginfo-0:2.9.3-32.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_session-0:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-mod_ssl-1:2.4.57-7.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-openssl-chil-0:1.0.0-19.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-chil-debuginfo-0:1.0.0-19.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el7jbcs.src",
          "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-0:0.4.10-34.el7jbcs.x86_64",
          "7Server-JBCS:jbcs-httpd24-openssl-pkcs11-debuginfo-0:0.4.10-34.el7jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-apr-util-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-devel-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-ldap-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-ldap-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-mysql-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-mysql-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-nss-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-nss-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-odbc-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-odbc-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-openssl-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-openssl-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-pgsql-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-pgsql-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-sqlite-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-apr-util-sqlite-debuginfo-0:1.6.1-103.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-curl-0:8.4.0-2.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-curl-debuginfo-0:8.4.0-2.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el8jbcs.src",
          "8Base-JBCS:jbcs-httpd24-httpd-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-httpd-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-httpd-devel-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-httpd-manual-0:2.4.57-7.el8jbcs.noarch",
          "8Base-JBCS:jbcs-httpd24-httpd-selinux-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-httpd-tools-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-httpd-tools-debuginfo-0:2.4.57-7.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd24-libcurl-0:8.4.0-2.el8jbcs.x86_64",
          "8Base-JBCS:jbcs-httpd