CVE-2026-10683 (GCVE-0-2026-10683)
Vulnerability from cvelistv5 – Published: 2026-07-27 18:30 – Updated: 2026-07-27 19:00
VLAI
EPSS
VEX
Title
DesignWare I2C target driver can be wedged into a permanent stuck state by an on-bus master (DoS)
Summary
In the Synopsys DesignWare I2C driver (drivers/i2c/i2c_dw.c) operating in target/slave mode, the rx_full interrupt handler gates the write_requested() callback on dw->state != CMD_SEND, and dw->state is only reset to READY on a STOP interrupt. The START_DET interrupt, whose handler in i2c_dw_slave_read_clear_intr_bits() would reset the state on every (re)START, was never added to the enabled interrupt mask in i2c_dw_slave_register(), so that recovery path was dead code.
As a result, if the STOP interrupt is lost (bus glitch/reset, or a concurrent master driving STOP) or the bus master issues a legal WRITE-repeated-START-WRITE sequence with the same direction, the driver remains in CMD_SEND permanently and never invokes write_requested() again for the life of the target.
An I2C master on the same physical bus can deliberately trigger this, causing the I2C target function to malfunction for all subsequent write transactions and desynchronizing consumer framing state (e.g. MCTP-over-I2C), a recoverable-by-reset denial of service of the target peripheral.
The fix unmasks START_DET so the state is reset at every bus (re)START. Impact is availability-only over a local board-level bus; no memory corruption results in the in-tree consumer, whose per-byte buffer write is independently bounds-checked.
Severity
SSVC
Exploitation: none
Automatable: no
Technical Impact: partial
CISA Coordinator (v2.0.3)
CWE
- CWE-835 - dos
Assigner
References
2 references
Impacted products
1 product
| Vendor | Product | Version | |
|---|---|---|---|
| zephyrproject | zephyr |
Affected:
4.0.0 , < 4.5.0
(semver)
|
{
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-10683",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-07-27T19:00:44.389419Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-07-27T19:00:53.973Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
"defaultStatus": "unaffected",
"packageName": "zephyr",
"product": "zephyr",
"programFiles": [
"drivers/i2c/i2c_dw.c"
],
"vendor": "zephyrproject",
"versions": [
{
"lessThan": "4.5.0",
"status": "affected",
"version": "4.0.0",
"versionType": "semver"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "In the Synopsys DesignWare I2C driver (drivers/i2c/i2c_dw.c) operating in target/slave mode, the rx_full interrupt handler gates the write_requested() callback on dw-\u003estate != CMD_SEND, and dw-\u003estate is only reset to READY on a STOP interrupt. The START_DET interrupt, whose handler in i2c_dw_slave_read_clear_intr_bits() would reset the state on every (re)START, was never added to the enabled interrupt mask in i2c_dw_slave_register(), so that recovery path was dead code.\n\nAs a result, if the STOP interrupt is lost (bus glitch/reset, or a concurrent master driving STOP) or the bus master issues a legal WRITE-repeated-START-WRITE sequence with the same direction, the driver remains in CMD_SEND permanently and never invokes write_requested() again for the life of the target.\n\nAn I2C master on the same physical bus can deliberately trigger this, causing the I2C target function to malfunction for all subsequent write transactions and desynchronizing consumer framing state (e.g. MCTP-over-I2C), a recoverable-by-reset denial of service of the target peripheral.\n\nThe fix unmasks START_DET so the state is reset at every bus (re)START. Impact is availability-only over a local board-level bus; no memory corruption results in the in-tree consumer, whose per-byte buffer write is independently bounds-checked."
}
],
"metrics": [
{
"cvssV3_1": {
"baseScore": 2.4,
"baseSeverity": "LOW",
"vectorString": "CVSS:3.1/AV:P/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
"version": "3.1"
},
"format": "CVSS"
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-835",
"description": "dos",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-07-27T18:30:49.935Z",
"orgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
"shortName": "zephyr"
},
"references": [
{
"name": "Fix commit",
"tags": [
"patch"
],
"url": "https://github.com/zephyrproject-rtos/zephyr/commit/06e2053efe0e324d71cc29cdd95160fff643730a"
},
{
"name": "GHSA-fj9c-r5qw-3639",
"url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-fj9c-r5qw-3639"
}
],
"title": "DesignWare I2C target driver can be wedged into a permanent stuck state by an on-bus master (DoS)",
"x_generator": {
"engine": "cvelib 1.8.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
"assignerShortName": "zephyr",
"cveId": "CVE-2026-10683",
"datePublished": "2026-07-27T18:30:49.935Z",
"dateReserved": "2026-06-02T15:26:20.475Z",
"dateUpdated": "2026-07-27T19:00:53.973Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2",
"vulnerability-lookup:meta": {
"epss": {
"cve": "CVE-2026-10683",
"date": "2026-07-28",
"epss": "0.0014",
"percentile": "0.03832"
},
"nvd": "{\"cve\":{\"id\":\"CVE-2026-10683\",\"sourceIdentifier\":\"vulnerabilities@zephyrproject.org\",\"published\":\"2026-07-27T19:17:14.683\",\"lastModified\":\"2026-07-27T20:32:27.703\",\"vulnStatus\":\"Awaiting Analysis\",\"cveTags\":[],\"descriptions\":[{\"lang\":\"en\",\"value\":\"In the Synopsys DesignWare I2C driver (drivers/i2c/i2c_dw.c) operating in target/slave mode, the rx_full interrupt handler gates the write_requested() callback on dw-\u003estate != CMD_SEND, and dw-\u003estate is only reset to READY on a STOP interrupt. The START_DET interrupt, whose handler in i2c_dw_slave_read_clear_intr_bits() would reset the state on every (re)START, was never added to the enabled interrupt mask in i2c_dw_slave_register(), so that recovery path was dead code.\\n\\nAs a result, if the STOP interrupt is lost (bus glitch/reset, or a concurrent master driving STOP) or the bus master issues a legal WRITE-repeated-START-WRITE sequence with the same direction, the driver remains in CMD_SEND permanently and never invokes write_requested() again for the life of the target.\\n\\nAn I2C master on the same physical bus can deliberately trigger this, causing the I2C target function to malfunction for all subsequent write transactions and desynchronizing consumer framing state (e.g. MCTP-over-I2C), a recoverable-by-reset denial of service of the target peripheral.\\n\\nThe fix unmasks START_DET so the state is reset at every bus (re)START. Impact is availability-only over a local board-level bus; no memory corruption results in the in-tree consumer, whose per-byte buffer write is independently bounds-checked.\"}],\"affected\":[{\"source\":\"vulnerabilities@zephyrproject.org\",\"affectedData\":[{\"vendor\":\"zephyrproject\",\"product\":\"zephyr\",\"defaultStatus\":\"unaffected\",\"collectionURL\":\"https://github.com/zephyrproject-rtos/zephyr\",\"packageName\":\"zephyr\",\"programFiles\":[\"drivers/i2c/i2c_dw.c\"],\"versions\":[{\"version\":\"4.0.0\",\"lessThan\":\"4.5.0\",\"versionType\":\"semver\",\"status\":\"affected\"}]}]}],\"metrics\":{\"cvssMetricV31\":[{\"source\":\"vulnerabilities@zephyrproject.org\",\"type\":\"Secondary\",\"cvssData\":{\"version\":\"3.1\",\"vectorString\":\"CVSS:3.1/AV:P/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L\",\"baseScore\":2.4,\"baseSeverity\":\"LOW\",\"attackVector\":\"PHYSICAL\",\"attackComplexity\":\"LOW\",\"privilegesRequired\":\"NONE\",\"userInteraction\":\"NONE\",\"scope\":\"UNCHANGED\",\"confidentialityImpact\":\"NONE\",\"integrityImpact\":\"NONE\",\"availabilityImpact\":\"LOW\"},\"exploitabilityScore\":0.9,\"impactScore\":1.4}],\"ssvcV203\":[{\"source\":\"134c704f-9b21-4f2e-91b3-4a467353bcc0\",\"ssvcData\":{\"timestamp\":\"2026-07-27T19:00:44.389419Z\",\"id\":\"CVE-2026-10683\",\"options\":[{\"exploitation\":\"none\"},{\"automatable\":\"no\"},{\"technicalImpact\":\"partial\"}],\"role\":\"CISA Coordinator\",\"version\":\"2.0.3\"}}]},\"weaknesses\":[{\"source\":\"vulnerabilities@zephyrproject.org\",\"type\":\"Secondary\",\"description\":[{\"lang\":\"en\",\"value\":\"CWE-835\"}]}],\"references\":[{\"url\":\"https://github.com/zephyrproject-rtos/zephyr/commit/06e2053efe0e324d71cc29cdd95160fff643730a\",\"source\":\"vulnerabilities@zephyrproject.org\"},{\"url\":\"https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-fj9c-r5qw-3639\",\"source\":\"vulnerabilities@zephyrproject.org\"}]}}",
"vulnrichment": {
"containers": "{\"adp\": [{\"title\": \"CISA ADP Vulnrichment\", \"metrics\": [{\"other\": {\"type\": \"ssvc\", \"content\": {\"id\": \"CVE-2026-10683\", \"role\": \"CISA Coordinator\", \"options\": [{\"Exploitation\": \"none\"}, {\"Automatable\": \"no\"}, {\"Technical Impact\": \"partial\"}], \"version\": \"2.0.3\", \"timestamp\": \"2026-07-27T19:00:44.389419Z\"}}}], \"providerMetadata\": {\"orgId\": \"134c704f-9b21-4f2e-91b3-4a467353bcc0\", \"shortName\": \"CISA-ADP\", \"dateUpdated\": \"2026-07-27T19:00:49.180Z\"}}], \"cna\": {\"title\": \"DesignWare I2C target driver can be wedged into a permanent stuck state by an on-bus master (DoS)\", \"metrics\": [{\"format\": \"CVSS\", \"cvssV3_1\": {\"version\": \"3.1\", \"baseScore\": 2.4, \"baseSeverity\": \"LOW\", \"vectorString\": \"CVSS:3.1/AV:P/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L\"}}], \"affected\": [{\"vendor\": \"zephyrproject\", \"product\": \"zephyr\", \"versions\": [{\"status\": \"affected\", \"version\": \"4.0.0\", \"lessThan\": \"4.5.0\", \"versionType\": \"semver\"}], \"packageName\": \"zephyr\", \"programFiles\": [\"drivers/i2c/i2c_dw.c\"], \"collectionURL\": \"https://github.com/zephyrproject-rtos/zephyr\", \"defaultStatus\": \"unaffected\"}], \"references\": [{\"url\": \"https://github.com/zephyrproject-rtos/zephyr/commit/06e2053efe0e324d71cc29cdd95160fff643730a\", \"name\": \"Fix commit\", \"tags\": [\"patch\"]}, {\"url\": \"https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-fj9c-r5qw-3639\", \"name\": \"GHSA-fj9c-r5qw-3639\"}], \"x_generator\": {\"engine\": \"cvelib 1.8.0\"}, \"descriptions\": [{\"lang\": \"en\", \"value\": \"In the Synopsys DesignWare I2C driver (drivers/i2c/i2c_dw.c) operating in target/slave mode, the rx_full interrupt handler gates the write_requested() callback on dw-\u003estate != CMD_SEND, and dw-\u003estate is only reset to READY on a STOP interrupt. The START_DET interrupt, whose handler in i2c_dw_slave_read_clear_intr_bits() would reset the state on every (re)START, was never added to the enabled interrupt mask in i2c_dw_slave_register(), so that recovery path was dead code.\\n\\nAs a result, if the STOP interrupt is lost (bus glitch/reset, or a concurrent master driving STOP) or the bus master issues a legal WRITE-repeated-START-WRITE sequence with the same direction, the driver remains in CMD_SEND permanently and never invokes write_requested() again for the life of the target.\\n\\nAn I2C master on the same physical bus can deliberately trigger this, causing the I2C target function to malfunction for all subsequent write transactions and desynchronizing consumer framing state (e.g. MCTP-over-I2C), a recoverable-by-reset denial of service of the target peripheral.\\n\\nThe fix unmasks START_DET so the state is reset at every bus (re)START. Impact is availability-only over a local board-level bus; no memory corruption results in the in-tree consumer, whose per-byte buffer write is independently bounds-checked.\"}], \"problemTypes\": [{\"descriptions\": [{\"lang\": \"en\", \"type\": \"CWE\", \"cweId\": \"CWE-835\", \"description\": \"dos\"}]}], \"providerMetadata\": {\"orgId\": \"e2e69745-5e70-4e92-8431-deb5529a81ad\", \"shortName\": \"zephyr\", \"dateUpdated\": \"2026-07-27T18:30:49.935Z\"}}}",
"cveMetadata": "{\"cveId\": \"CVE-2026-10683\", \"state\": \"PUBLISHED\", \"dateUpdated\": \"2026-07-27T19:00:53.973Z\", \"dateReserved\": \"2026-06-02T15:26:20.475Z\", \"assignerOrgId\": \"e2e69745-5e70-4e92-8431-deb5529a81ad\", \"datePublished\": \"2026-07-27T18:30:49.935Z\", \"assignerShortName\": \"zephyr\"}",
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
}
}
Loading…
Loading…
Experimental. This forecast is provided for visualization only and may change without notice. Do not use it for operational decisions.
Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.
Sightings
| Author | Source | Type | Date | Other |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or observed by the user.
- Confirmed: The vulnerability has been validated from an analyst's perspective.
- Published Proof of Concept: A public proof of concept is available for this vulnerability.
- Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
- Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
- Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
- Not confirmed: The user expressed doubt about the validity of the vulnerability.
- Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Loading…
The MITRE ATT&CK techniques below are AI-generated suggestions, inferred from the description of the
vulnerability by the CIRCL/vulnerability-attack-technique-classification-roberta-base
model, served locally by ML-Gateway.
They have not been verified by an analyst and are provided for guidance only.
Loading…
Loading…