ICSA-18-142-01

Vulnerability from csaf_cisa - Published: 2018-05-22 00:00 - Updated: 2018-08-30 00:00
Summary
Martem TELEM-GW6/GWM (Update B)

Notes

CISA Disclaimer
This CSAF advisory was extracted from unstructured data and may contain inaccuracies. If you notice any errors, please reach out to the designated contact at CISA CSAF: central@cisa.dhs.gov
Legal Notice
All information products included in https://us-cert.cisa.gov/ics are provided "as is" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see https://us-cert.cisa.gov/tlp/.
Risk evaluation
Successful exploitation of these vulnerabilities could allow execution of unauthorized industrial process control commands, full control over RTU, denial of service, or client-side code execution.
Critical infrastructure sectors
Energy
Countries/areas deployed
Estonia, Latvia, Lithuania, and Finland
Company headquarters location
Estonia
Recommended Practices
NCCIC recommends users take defensive measures to minimize the risk of exploitation of these vulnerabilities. Specifically, users should:
Recommended Practices
NCCIC reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
Recommended Practices
NCCIC also provides a section for control systems security recommended practices on the ICS-CERT web page. Several recommended practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
Recommended Practices
Organizations observing any suspected malicious activity should follow their established internal procedures and report their findings to NCCIC for tracking and correlation against other incidents.
Recommended Practices
NCCIC also recommends that users take the following measures to protect themselves from social engineering attacks:
Recommended Practices
Additional mitigation guidance and recommended practices are publicly available on the ICS-CERT website in the Technical Information Paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
Exploitability
No known public exploits specifically target these vulnerabilities.
To clipboard 

{
  "document": {
    "acknowledgments": [
      {
        "names": [
          "Bernhards Blumbergs",
          "Arturs Danilevics"
        ],
        "organization": "CERT.LV, Latvia",
        "summary": "reporting these vulnerabilities to NCCIC"
      }
    ],
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Disclosure is not limited",
      "tlp": {
        "label": "WHITE",
        "url": "https://us-cert.cisa.gov/tlp/"
      }
    },
    "lang": "en-US",
    "notes": [
      {
        "category": "general",
        "text": "This CSAF advisory was extracted from unstructured data and may contain inaccuracies. If you notice any errors, please reach out to the designated contact at CISA CSAF: central@cisa.dhs.gov",
        "title": "CISA Disclaimer"
      },
      {
        "category": "legal_disclaimer",
        "text": "All information products included in https://us-cert.cisa.gov/ics are provided \"as is\" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see https://us-cert.cisa.gov/tlp/.",
        "title": "Legal Notice"
      },
      {
        "category": "summary",
        "text": "Successful exploitation of these vulnerabilities could allow execution of unauthorized industrial process control commands, full control over RTU, denial of service, or client-side code execution.",
        "title": "Risk evaluation"
      },
      {
        "category": "other",
        "text": "Energy",
        "title": "Critical infrastructure sectors"
      },
      {
        "category": "other",
        "text": "Estonia, Latvia, Lithuania, and Finland",
        "title": "Countries/areas deployed"
      },
      {
        "category": "other",
        "text": "Estonia",
        "title": "Company headquarters location"
      },
      {
        "category": "general",
        "text": "NCCIC recommends users take defensive measures to minimize the risk of exploitation of these vulnerabilities. Specifically, users should:",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "NCCIC reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "NCCIC also provides a section for control systems security recommended practices on the ICS-CERT web page. Several recommended practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Organizations observing any suspected malicious activity should follow their established internal procedures and report their findings to NCCIC for tracking and correlation against other incidents.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "NCCIC also recommends that users take the following measures to protect themselves from social engineering attacks:",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Additional mitigation guidance and recommended practices are publicly available on the ICS-CERT website in the Technical Information Paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "other",
        "text": "No known public exploits specifically target these vulnerabilities.",
        "title": "Exploitability"
      }
    ],
    "publisher": {
      "category": "coordinator",
      "contact_details": "Email: CISAservicedesk@cisa.dhs.gov;\n Toll Free: 1-888-282-0870",
      "name": "CISA",
      "namespace": "https://www.cisa.gov/"
    },
    "references": [
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-18-142-01 JSON",
        "url": "https://raw.githubusercontent.com/cisagov/CSAF/develop/csaf_files/OT/white/2018/icsa-18-142-01.json"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-18-142-01 Web Version",
        "url": "https://www.cisa.gov/news-events/ics-advisories/icsa-18-142-01"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/alerts/ICS-ALERT-10-301-01"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/news-events/ics-advisories/icsa-18-142-01"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf"
      }
    ],
    "title": "Martem TELEM-GW6/GWM (Update B)",
    "tracking": {
      "current_release_date": "2018-08-30T00:00:00.000000Z",
      "generator": {
        "engine": {
          "name": "CISA CSAF Generator",
          "version": "1.0.0"
        }
      },
      "id": "ICSA-18-142-01",
      "initial_release_date": "2018-05-22T00:00:00.000000Z",
      "revision_history": [
        {
          "date": "2018-05-22T00:00:00.000000Z",
          "legacy_version": "Initial",
          "number": "1",
          "summary": "ICSA-18-142-01 Martem TELEM-GW6/GWM"
        },
        {
          "date": "2018-05-24T00:00:00.000000Z",
          "legacy_version": "A",
          "number": "2",
          "summary": "ICSA-18-142-01 Martem TELEM-GW6/GWM (Update A)"
        },
        {
          "date": "2018-08-30T00:00:00.000000Z",
          "legacy_version": "B",
          "number": "3",
          "summary": "ICSA-18-142-01 Martem TELEM-GW6/GWM (Update B)"
        }
      ],
      "status": "final",
      "version": "3"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003c 2.0.87-4018403-k4",
                "product": {
                  "name": "GW6: versions prior to 2.0.87-4018403-k4",
                  "product_id": "CSAFPID-0001"
                }
              }
            ],
            "category": "product_name",
            "name": "GW6"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003c 2.0.87-4018403-k4",
                "product": {
                  "name": "GWM: versions prior to 2.0.87-4018403-k4",
                  "product_id": "CSAFPID-0002"
                }
              }
            ],
            "category": "product_name",
            "name": "GWM"
          }
        ],
        "category": "vendor",
        "name": "Martem"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2018-10603",
      "cwe": {
        "id": "CWE-306",
        "name": "Missing Authentication for Critical Function"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The RTU does not perform authentication of IEC-104 control commands, which may allow a rogue node a remote control of the industrial process.CVE-2018-10603 has been assigned to this vulnerability. A CVSS v3 base score of 10.0 has been calculated; the CVSS vector string is (AV:N/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:L).",
          "title": "Vulnerability Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "web.nvd.nist.gov",
          "url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2018-10603"
        },
        {
          "category": "external",
          "summary": "www.first.org",
          "url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:L"
        }
      ],
      "remediations": [
        {
          "category": "mitigation",
          "details": "Martem has provided updated information within the \u201cSecurity Considerations\u201d section of their Configuration Manual which can be accessed at following link:",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "http://phobos.martem.ee/shr/dsum/Telem-GWS_usermanual.pdf"
        },
        {
          "category": "mitigation",
          "details": "Using \"other side IP\" field in RTU configuration for every TCP/IP channel. This will minimize the risk of allowing unauthorized access and control over the communication channels (i.e., only trusted partners are allowed);",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        },
        {
          "category": "mitigation",
          "details": "Using secure VPN channels;",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        },
        {
          "category": "mitigation",
          "details": "Proper packet filtering by enabling firewall in RTU configuration. Note that the \"interface\" field of every communication channel must be properly set in RTU configuration when firewall is enabled.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        },
        {
          "category": "mitigation",
          "details": "See Martem Security Advisory SA1805182:",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "http://martem.eu/csa/Martem_CSA_Telem_1805182.pdf"
        },
        {
          "category": "mitigation",
          "details": "See Martem Security Advisory SA1805184:",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "http://martem.eu/csa/Martem_CSA_Telem_1805184.pdf"
        },
        {
          "category": "mitigation",
          "details": "See Martem Security Advisory SA1805183:",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://martem.eu/csa/Martem_CSA_Telem_1805183.pdf"
        },
        {
          "category": "mitigation",
          "details": "See Martem Security Advisory SA1805181:",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "http://martem.eu/csa/Martem_CSA_Telem_1805181.pdf"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 10.0,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:L",
            "version": "3.0"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ]
    },
    {
      "cve": "CVE-2018-10605",
      "cwe": {
        "id": "CWE-276",
        "name": "Incorrect Default Permissions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Using default credentials to connect to the RTU, unprivileged user may modify/upload a new system configuration or take the full control over the RTU.CVE-2018-10605 has been assigned to this vulnerability. A CVSS v3 base score of 8.8 has been calculated; the CVSS vector string is (AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H).",
          "title": "Vulnerability Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "web.nvd.nist.gov",
          "url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2018-10605"
        },
        {
          "category": "external",
          "summary": "www.first.org",
          "url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H"
        }
      ],
      "remediations": [
        {
          "category": "mitigation",
          "details": "Martem has provided updated information within the \u201cSecurity Considerations\u201d section of their Configuration Manual which can be accessed at following link:",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "http://phobos.martem.ee/shr/dsum/Telem-GWS_usermanual.pdf"
        },
        {
          "category": "mitigation",
          "details": "Using \"other side IP\" field in RTU configuration for every TCP/IP channel. This will minimize the risk of allowing unauthorized access and control over the communication channels (i.e., only trusted partners are allowed);",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        },
        {
          "category": "mitigation",
          "details": "Using secure VPN channels;",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        },
        {
          "category": "mitigation",
          "details": "Proper packet filtering by enabling firewall in RTU configuration. Note that the \"interface\" field of every communication channel must be properly set in RTU configuration when firewall is enabled.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        },
        {
          "category": "mitigation",
          "details": "See Martem Security Advisory SA1805182:",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "http://martem.eu/csa/Martem_CSA_Telem_1805182.pdf"
        },
        {
          "category": "mitigation",
          "details": "See Martem Security Advisory SA1805184:",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "http://martem.eu/csa/Martem_CSA_Telem_1805184.pdf"
        },
        {
          "category": "mitigation",
          "details": "Martem recommends the following mitigations for CVE-2018-10605: Upgrade to new firmware release 2.0.87-4018403- k4 or newer",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        },
        {
          "category": "mitigation",
          "details": "Martem recommends the following mitigations for CVE-2018-10605: Change default passwords to reasonably strong ones.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        },
        {
          "category": "mitigation",
          "details": "Martem recommends the following mitigations for CVE-2018-10605: Implement firewall rules to limit unsanctioned SSH access for IPv4 and IPv6.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        },
        {
          "category": "mitigation",
          "details": "Martem recommends the following mitigations for CVE-2018-10605: Use SSH public key authorization.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        },
        {
          "category": "mitigation",
          "details": "Martem recommends the following mitigations for CVE-2018-10605: Ensure GWS.exe is up to date.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        },
        {
          "category": "mitigation",
          "details": "See Martem Security Advisory SA1805183:",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://martem.eu/csa/Martem_CSA_Telem_1805183.pdf"
        },
        {
          "category": "mitigation",
          "details": "See Martem Security Advisory SA1805181:",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "http://martem.eu/csa/Martem_CSA_Telem_1805181.pdf"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.0"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ]
    },
    {
      "cve": "CVE-2018-10607",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Creating new connections to one or more IOAs, without closing them properly, may cause a denial of service within the industrial process control channel.CVE-2018-10607 has been assigned to this vulnerability. A CVSS v3 base score of 8.2 has been calculated; the CVSS vector string is (AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:H).",
          "title": "Vulnerability Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "web.nvd.nist.gov",
          "url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2018-10607"
        },
        {
          "category": "external",
          "summary": "www.first.org",
          "url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:H"
        }
      ],
      "remediations": [
        {
          "category": "mitigation",
          "details": "Martem has provided updated information within the \u201cSecurity Considerations\u201d section of their Configuration Manual which can be accessed at following link:",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "http://phobos.martem.ee/shr/dsum/Telem-GWS_usermanual.pdf"
        },
        {
          "category": "mitigation",
          "details": "Using \"other side IP\" field in RTU configuration for every TCP/IP channel. This will minimize the risk of allowing unauthorized access and control over the communication channels (i.e., only trusted partners are allowed);",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        },
        {
          "category": "mitigation",
          "details": "Using secure VPN channels;",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        },
        {
          "category": "mitigation",
          "details": "Proper packet filtering by enabling firewall in RTU configuration. Note that the \"interface\" field of every communication channel must be properly set in RTU configuration when firewall is enabled.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        },
        {
          "category": "mitigation",
          "details": "See Martem Security Advisory SA1805182:",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "http://martem.eu/csa/Martem_CSA_Telem_1805182.pdf"
        },
        {
          "category": "mitigation",
          "details": "See Martem Security Advisory SA1805184:",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "http://martem.eu/csa/Martem_CSA_Telem_1805184.pdf"
        },
        {
          "category": "mitigation",
          "details": "See Martem Security Advisory SA1805183:",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://martem.eu/csa/Martem_CSA_Telem_1805183.pdf"
        },
        {
          "category": "mitigation",
          "details": "See Martem Security Advisory SA1805181:",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "http://martem.eu/csa/Martem_CSA_Telem_1805181.pdf"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.2,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:H",
            "version": "3.0"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ]
    },
    {
      "cve": "CVE-2018-10609",
      "cwe": {
        "id": "CWE-79",
        "name": "Improper Neutralization of Input During Web Page Generation (\u0027Cross-site Scripting\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Improper sanitization of data over a Websocket may allow cross-site scripting and client-side code execution with target user privileges.CVE-2018-10609 has been assigned to this vulnerability. A CVSS v3 base score of 7.4 has been calculated; the CVSS vector string is (AV:N/AC:L/PR:N/UI:R/S:C/C:N/I:H/A:N).",
          "title": "Vulnerability Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002"
        ]
      },
      "references": [
        {
          "category": "external",
          "summary": "web.nvd.nist.gov",
          "url": "http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2018-10609"
        },
        {
          "category": "external",
          "summary": "www.first.org",
          "url": "https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:R/S:C/C:N/I:H/A:N"
        }
      ],
      "remediations": [
        {
          "category": "mitigation",
          "details": "Martem has provided updated information within the \u201cSecurity Considerations\u201d section of their Configuration Manual which can be accessed at following link:",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "http://phobos.martem.ee/shr/dsum/Telem-GWS_usermanual.pdf"
        },
        {
          "category": "mitigation",
          "details": "Using \"other side IP\" field in RTU configuration for every TCP/IP channel. This will minimize the risk of allowing unauthorized access and control over the communication channels (i.e., only trusted partners are allowed);",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        },
        {
          "category": "mitigation",
          "details": "Using secure VPN channels;",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        },
        {
          "category": "mitigation",
          "details": "Proper packet filtering by enabling firewall in RTU configuration. Note that the \"interface\" field of every communication channel must be properly set in RTU configuration when firewall is enabled.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        },
        {
          "category": "mitigation",
          "details": "See Martem Security Advisory SA1805182:",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "http://martem.eu/csa/Martem_CSA_Telem_1805182.pdf"
        },
        {
          "category": "mitigation",
          "details": "See Martem Security Advisory SA1805184:",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "http://martem.eu/csa/Martem_CSA_Telem_1805184.pdf"
        },
        {
          "category": "mitigation",
          "details": "See Martem Security Advisory SA1805183:",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "https://martem.eu/csa/Martem_CSA_Telem_1805183.pdf"
        },
        {
          "category": "mitigation",
          "details": "Martem recommends the following mitigations for CVE-2018-10609: Upgrade to firmware 2.0.72-cb42e64-k4 or newer. Contact Martem for more information.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        },
        {
          "category": "mitigation",
          "details": "Martem recommends the following mitigations for CVE-2018-10609: WebServer should be turned on according to need of the configurator. If the WebServer is not needed anymore, then it should be removed from the configuration.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        },
        {
          "category": "mitigation",
          "details": "Martem recommends the following mitigations for CVE-2018-10609: WebServer access should be protected by strong password to avoid unauthorized access. Other side IP should be defined in configuration. Use firewall to avoid untrusted connections and to restrict the number of parallel connections to the WebServer.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        },
        {
          "category": "mitigation",
          "details": "See Martem Security Advisory SA1805181:",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ],
          "url": "http://martem.eu/csa/Martem_CSA_Telem_1805181.pdf"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.0/AV:N/AC:L/PR:N/UI:R/S:C/C:N/I:H/A:N",
            "version": "3.0"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002"
          ]
        }
      ]
    }
  ]
}


Log in or create an account to share your comment.




Tags
Taxonomy of the tags.




Sightings

Author Source Type Date

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.



Detection rules are retrieved from Rulezet.