{
  "gsd": {
    "metadata": {
      "exploitCode": "unknown",
      "remediation": "unknown",
      "reportConfidence": "confirmed",
      "type": "vulnerability"
    },
    "osvSchema": {
      "aliases": [
        "CVE-2024-23156"
      ],
      "id": "GSD-2024-23156",
      "modified": "2024-01-12T06:02:17.991579Z",
      "schema_version": "1.4.0"
    }
  },
  "namespaces": {
    "cve.org": {
      "CVE_data_meta": {
        "ASSIGNER": "cve@mitre.org",
        "ID": "CVE-2024-23156",
        "STATE": "RESERVED"
      },
      "data_format": "MITRE",
      "data_type": "CVE",
      "data_version": "4.0",
      "description": {
        "description_data": [
          {
            "lang": "eng",
            "value": "** RESERVED ** This candidate has been reserved by an organization or individual that will use it when announcing a new security problem. When the candidate has been publicized, the details for this candidate will be provided."
          }
        ]
      }
    }
  }
}

{
  "document": {
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "tlp": {
        "label": "WHITE"
      }
    },
    "lang": "nl",
    "notes": [
      {
        "category": "legal_disclaimer",
        "text": "The Netherlands Cyber Security Center (henceforth: NCSC-NL) maintains this page to enhance access to its information and security advisories. The use of this security advisory is subject to the following terms and conditions:\n\n    NCSC-NL makes every reasonable effort to ensure that the content of this page is kept up to date, and that it is accurate and complete. Nevertheless, NCSC-NL cannot entirely rule out the possibility of errors, and therefore cannot give any warranty in respect of its completeness, accuracy or continuous keeping up-to-date. The information contained in this security advisory is intended solely for the purpose of providing general information to professional users. No rights can be derived from the information provided therein.\n\n    NCSC-NL and the Kingdom of the Netherlands assume no legal liability or responsibility for any damage resulting from either the use or inability of use of this security advisory. This includes damage resulting from the inaccuracy of incompleteness of the information contained in the advisory.\n    This security advisory is subject to Dutch law. All disputes related to or arising from the use of this advisory will be submitted to the competent court in The Hague. This choice of means also applies to the court in summary proceedings."
      },
      {
        "category": "description",
        "text": "Autodesk heeft kwetsbaarheden verholpen in diverse AutoCad producten.",
        "title": "Feiten"
      },
      {
        "category": "description",
        "text": "De kwetsbaarheden bevinden zich in diverse parsers voor cad-bestandstypes. Een kwaadwillende kan de kwetsbaarheden misbruiken om een Denial-of-Service te veroorzaken, of mogelijk willekeurige code uit te voeren binnen de applicatie.\n\nVoor succesvol misbruik moet de kwaadwillende het slachtoffer misleiden een malafide bestand te openen.",
        "title": "Interpretaties"
      },
      {
        "category": "description",
        "text": "Autodesk heeft updates uitgebracht om de kwetsbaarheden te verhelpen. Zie bijgevoegde referenties voor meer informatie.",
        "title": "Oplossingen"
      },
      {
        "category": "general",
        "text": "medium",
        "title": "Kans"
      },
      {
        "category": "general",
        "text": "high",
        "title": "Schade"
      },
      {
        "category": "general",
        "text": "Improper Restriction of Operations within the Bounds of a Memory Buffer",
        "title": "CWE-119"
      },
      {
        "category": "general",
        "text": "Heap-based Buffer Overflow",
        "title": "CWE-122"
      },
      {
        "category": "general",
        "text": "Out-of-bounds Read",
        "title": "CWE-125"
      },
      {
        "category": "general",
        "text": "Out-of-bounds Write",
        "title": "CWE-787"
      },
      {
        "category": "general",
        "text": "Access of Uninitialized Pointer",
        "title": "CWE-824"
      }
    ],
    "publisher": {
      "category": "coordinator",
      "contact_details": "cert@ncsc.nl",
      "name": "Nationaal Cyber Security Centrum",
      "namespace": "https://www.ncsc.nl/"
    },
    "references": [
      {
        "category": "external",
        "summary": "Reference - ncscclear",
        "url": "https://www.autodesk.com/trust/security-advisories/adsk-sa-2024-0010"
      }
    ],
    "title": "Kwetsbaarheden verholpen in Autodesk Autocad",
    "tracking": {
      "current_release_date": "2024-06-20T14:09:54.121906Z",
      "id": "NCSC-2024-0263",
      "initial_release_date": "2024-06-20T14:09:54.121906Z",
      "revision_history": [
        {
          "date": "2024-06-20T14:09:54.121906Z",
          "number": "0",
          "summary": "Initiele versie"
        }
      ],
      "status": "final",
      "version": "1.0.0"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "category": "product_name",
            "name": "advance_steel",
            "product": {
              "name": "advance_steel",
              "product_id": "CSAFPID-705771",
              "product_identification_helper": {
                "cpe": "cpe:2.3:a:autodesk:advance_steel:*:*:*:*:*:*:*:*"
              }
            }
          },
          {
            "category": "product_name",
            "name": "autocad_architecture",
            "product": {
              "name": "autocad_architecture",
              "product_id": "CSAFPID-75351",
              "product_identification_helper": {
                "cpe": "cpe:2.3:a:autodesk:autocad_architecture:*:*:*:*:*:*:*:*"
              }
            }
          },
          {
            "category": "product_name",
            "name": "autocad_civil_3d",
            "product": {
              "name": "autocad_civil_3d",
              "product_id": "CSAFPID-75352",
              "product_identification_helper": {
                "cpe": "cpe:2.3:a:autodesk:autocad_civil_3d:*:*:*:*:*:*:*:*"
              }
            }
          },
          {
            "category": "product_name",
            "name": "autocad_electrical",
            "product": {
              "name": "autocad_electrical",
              "product_id": "CSAFPID-75353",
              "product_identification_helper": {
                "cpe": "cpe:2.3:a:autodesk:autocad_electrical:*:*:*:*:*:*:*:*"
              }
            }
          },
          {
            "category": "product_name",
            "name": "autocad_map_3d",
            "product": {
              "name": "autocad_map_3d",
              "product_id": "CSAFPID-75355",
              "product_identification_helper": {
                "cpe": "cpe:2.3:a:autodesk:autocad_map_3d:*:*:*:*:*:*:*:*"
              }
            }
          },
          {
            "category": "product_name",
            "name": "autocad_mechanical",
            "product": {
              "name": "autocad_mechanical",
              "product_id": "CSAFPID-75356",
              "product_identification_helper": {
                "cpe": "cpe:2.3:a:autodesk:autocad_mechanical:*:*:*:*:*:*:*:*"
              }
            }
          },
          {
            "category": "product_name",
            "name": "autocad_mep",
            "product": {
              "name": "autocad_mep",
              "product_id": "CSAFPID-75357",
              "product_identification_helper": {
                "cpe": "cpe:2.3:a:autodesk:autocad_mep:*:*:*:*:*:*:*:*"
              }
            }
          },
          {
            "category": "product_name",
            "name": "autocad_plant_3d",
            "product": {
              "name": "autocad_plant_3d",
              "product_id": "CSAFPID-75358",
              "product_identification_helper": {
                "cpe": "cpe:2.3:a:autodesk:autocad_plant_3d:*:*:*:*:*:*:*:*"
              }
            }
          },
          {
            "category": "product_name",
            "name": "autocad",
            "product": {
              "name": "autocad",
              "product_id": "CSAFPID-75349",
              "product_identification_helper": {
                "cpe": "cpe:2.3:a:autodesk:autocad:*:*:*:*:*:*:*:*"
              }
            }
          }
        ],
        "category": "vendor",
        "name": "autodesk"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2024-23150",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "other",
          "text": "Out-of-bounds Write",
          "title": "CWE-787"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-75349"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "CVE-2024-23150",
          "url": "https://api.ncsc.nl/velma/v1/vulnerabilities/2024/CVE-2024-23150.json"
        }
      ],
      "title": "CVE-2024-23150"
    },
    {
      "cve": "CVE-2024-23151",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "other",
          "text": "Out-of-bounds Write",
          "title": "CWE-787"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-75349"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "CVE-2024-23151",
          "url": "https://api.ncsc.nl/velma/v1/vulnerabilities/2024/CVE-2024-23151.json"
        }
      ],
      "title": "CVE-2024-23151"
    },
    {
      "cve": "CVE-2024-23152",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "other",
          "text": "Out-of-bounds Read",
          "title": "CWE-125"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-75349"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "CVE-2024-23152",
          "url": "https://api.ncsc.nl/velma/v1/vulnerabilities/2024/CVE-2024-23152.json"
        }
      ],
      "title": "CVE-2024-23152"
    },
    {
      "cve": "CVE-2024-23153",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "other",
          "text": "Out-of-bounds Read",
          "title": "CWE-125"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-75349"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "CVE-2024-23153",
          "url": "https://api.ncsc.nl/velma/v1/vulnerabilities/2024/CVE-2024-23153.json"
        }
      ],
      "title": "CVE-2024-23153"
    },
    {
      "cve": "CVE-2024-23154",
      "cwe": {
        "id": "CWE-122",
        "name": "Heap-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "other",
          "text": "Heap-based Buffer Overflow",
          "title": "CWE-122"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-75349"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "CVE-2024-23154",
          "url": "https://api.ncsc.nl/velma/v1/vulnerabilities/2024/CVE-2024-23154.json"
        }
      ],
      "title": "CVE-2024-23154"
    },
    {
      "cve": "CVE-2024-23155",
      "cwe": {
        "id": "CWE-122",
        "name": "Heap-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "other",
          "text": "Heap-based Buffer Overflow",
          "title": "CWE-122"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-75349"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "CVE-2024-23155",
          "url": "https://api.ncsc.nl/velma/v1/vulnerabilities/2024/CVE-2024-23155.json"
        }
      ],
      "title": "CVE-2024-23155"
    },
    {
      "cve": "CVE-2024-23156",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "other",
          "text": "Improper Restriction of Operations within the Bounds of a Memory Buffer",
          "title": "CWE-119"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-75349"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "CVE-2024-23156",
          "url": "https://api.ncsc.nl/velma/v1/vulnerabilities/2024/CVE-2024-23156.json"
        }
      ],
      "title": "CVE-2024-23156"
    },
    {
      "cve": "CVE-2024-23157",
      "references": [
        {
          "category": "self",
          "summary": "CVE-2024-23157",
          "url": "https://api.ncsc.nl/velma/v1/vulnerabilities/2024/CVE-2024-23157.json"
        }
      ],
      "title": "CVE-2024-23157"
    },
    {
      "cve": "CVE-2024-23158",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "other",
          "text": "Use After Free",
          "title": "CWE-416"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-75349"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "CVE-2024-23158",
          "url": "https://api.ncsc.nl/velma/v1/vulnerabilities/2024/CVE-2024-23158.json"
        }
      ],
      "title": "CVE-2024-23158"
    },
    {
      "cve": "CVE-2024-23159",
      "cwe": {
        "id": "CWE-824",
        "name": "Access of Uninitialized Pointer"
      },
      "notes": [
        {
          "category": "other",
          "text": "Access of Uninitialized Pointer",
          "title": "CWE-824"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-75349"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "CVE-2024-23159",
          "url": "https://api.ncsc.nl/velma/v1/vulnerabilities/2024/CVE-2024-23159.json"
        }
      ],
      "title": "CVE-2024-23159"
    },
    {
      "cve": "CVE-2024-36999",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "other",
          "text": "Out-of-bounds Write",
          "title": "CWE-787"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-75349"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "CVE-2024-36999",
          "url": "https://api.ncsc.nl/velma/v1/vulnerabilities/2024/CVE-2024-36999.json"
        }
      ],
      "title": "CVE-2024-36999"
    }
  ]
}

{
  "document": {
    "aggregate_severity": {
      "text": "mittel"
    },
    "category": "csaf_base",
    "csaf_version": "2.0",
    "distribution": {
      "tlp": {
        "label": "WHITE",
        "url": "https://www.first.org/tlp/"
      }
    },
    "lang": "de-DE",
    "notes": [
      {
        "category": "legal_disclaimer",
        "text": "Das BSI ist als Anbieter f\u00fcr die eigenen, zur Nutzung bereitgestellten Inhalte nach den allgemeinen Gesetzen verantwortlich. Nutzerinnen und Nutzer sind jedoch daf\u00fcr verantwortlich, die Verwendung und/oder die Umsetzung der mit den Inhalten bereitgestellten Informationen sorgf\u00e4ltig im Einzelfall zu pr\u00fcfen."
      },
      {
        "category": "description",
        "text": "AutoCAD ist Teil der CAD (Computer Aided Design) Produktpalette von Autodesk.",
        "title": "Produktbeschreibung"
      },
      {
        "category": "summary",
        "text": "Ein entfernter, anonymer Angreifer kann mehrere Schwachstellen in Autodesk AutoCAD ausnutzen, um beliebigen Programmcode auszuf\u00fchren.",
        "title": "Angriff"
      },
      {
        "category": "general",
        "text": "- Sonstiges\n- Windows",
        "title": "Betroffene Betriebssysteme"
      }
    ],
    "publisher": {
      "category": "other",
      "contact_details": "csaf-provider@cert-bund.de",
      "name": "Bundesamt f\u00fcr Sicherheit in der Informationstechnik",
      "namespace": "https://www.bsi.bund.de"
    },
    "references": [
      {
        "category": "self",
        "summary": "WID-SEC-W-2024-1404 - CSAF Version",
        "url": "https://wid.cert-bund.de/.well-known/csaf/white/2024/wid-sec-w-2024-1404.json"
      },
      {
        "category": "self",
        "summary": "WID-SEC-2024-1404 - Portal Version",
        "url": "https://wid.cert-bund.de/portal/wid/securityadvisory?name=WID-SEC-2024-1404"
      },
      {
        "category": "external",
        "summary": "AUTODESK Security advisory vom 2024-06-18",
        "url": "https://www.autodesk.com/trust/security-advisories/adsk-sa-2024-0010"
      }
    ],
    "source_lang": "en-US",
    "title": "Autodesk AutoCAD: Mehrere Schwachstellen erm\u00f6glichen Codeausf\u00fchrung",
    "tracking": {
      "current_release_date": "2024-06-24T22:00:00.000+00:00",
      "generator": {
        "date": "2024-08-15T18:10:18.666+00:00",
        "engine": {
          "name": "BSI-WID",
          "version": "1.3.5"
        }
      },
      "id": "WID-SEC-W-2024-1404",
      "initial_release_date": "2024-06-18T22:00:00.000+00:00",
      "revision_history": [
        {
          "date": "2024-06-18T22:00:00.000+00:00",
          "number": "1",
          "summary": "Initiale Fassung"
        },
        {
          "date": "2024-06-24T22:00:00.000+00:00",
          "number": "2",
          "summary": "CVE erg\u00e4nzt"
        }
      ],
      "status": "final",
      "version": "2"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version",
                "name": "2024",
                "product": {
                  "name": "Autodesk AutoCAD 2024",
                  "product_id": "T035556",
                  "product_identification_helper": {
                    "cpe": "cpe:/a:autodesk:autocad:2024"
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "AutoCAD"
          }
        ],
        "category": "vendor",
        "name": "Autodesk"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2024-23150",
      "notes": [
        {
          "category": "description",
          "text": "In Autodesk AutoCAD existieren mehrere Schwachstellen. Diese Schwachstellen bestehen beim Parsen verschiedener Dateitypen aufgrund verschiedener Sicherheitsprobleme wie einem Heap-basierten Puffer\u00fcberlauf, einem User-after-free und Out-of-bounds-Problemen unter anderem. Ein entfernter, anonymer Angreifer kann diese Schwachstellen zur Ausf\u00fchrung von beliebigem Code ausnutzen. Eine erfolgreiche Ausnutzung erfordert eine Benutzerinteraktion."
        }
      ],
      "product_status": {
        "known_affected": [
          "T035556"
        ]
      },
      "release_date": "2024-06-18T22:00:00.000+00:00",
      "title": "CVE-2024-23150"
    },
    {
      "cve": "CVE-2024-23151",
      "notes": [
        {
          "category": "description",
          "text": "In Autodesk AutoCAD existieren mehrere Schwachstellen. Diese Schwachstellen bestehen beim Parsen verschiedener Dateitypen aufgrund verschiedener Sicherheitsprobleme wie einem Heap-basierten Puffer\u00fcberlauf, einem User-after-free und Out-of-bounds-Problemen unter anderem. Ein entfernter, anonymer Angreifer kann diese Schwachstellen zur Ausf\u00fchrung von beliebigem Code ausnutzen. Eine erfolgreiche Ausnutzung erfordert eine Benutzerinteraktion."
        }
      ],
      "product_status": {
        "known_affected": [
          "T035556"
        ]
      },
      "release_date": "2024-06-18T22:00:00.000+00:00",
      "title": "CVE-2024-23151"
    },
    {
      "cve": "CVE-2024-23152",
      "notes": [
        {
          "category": "description",
          "text": "In Autodesk AutoCAD existieren mehrere Schwachstellen. Diese Schwachstellen bestehen beim Parsen verschiedener Dateitypen aufgrund verschiedener Sicherheitsprobleme wie einem Heap-basierten Puffer\u00fcberlauf, einem User-after-free und Out-of-bounds-Problemen unter anderem. Ein entfernter, anonymer Angreifer kann diese Schwachstellen zur Ausf\u00fchrung von beliebigem Code ausnutzen. Eine erfolgreiche Ausnutzung erfordert eine Benutzerinteraktion."
        }
      ],
      "product_status": {
        "known_affected": [
          "T035556"
        ]
      },
      "release_date": "2024-06-18T22:00:00.000+00:00",
      "title": "CVE-2024-23152"
    },
    {
      "cve": "CVE-2024-23153",
      "notes": [
        {
          "category": "description",
          "text": "In Autodesk AutoCAD existieren mehrere Schwachstellen. Diese Schwachstellen bestehen beim Parsen verschiedener Dateitypen aufgrund verschiedener Sicherheitsprobleme wie einem Heap-basierten Puffer\u00fcberlauf, einem User-after-free und Out-of-bounds-Problemen unter anderem. Ein entfernter, anonymer Angreifer kann diese Schwachstellen zur Ausf\u00fchrung von beliebigem Code ausnutzen. Eine erfolgreiche Ausnutzung erfordert eine Benutzerinteraktion."
        }
      ],
      "product_status": {
        "known_affected": [
          "T035556"
        ]
      },
      "release_date": "2024-06-18T22:00:00.000+00:00",
      "title": "CVE-2024-23153"
    },
    {
      "cve": "CVE-2024-23154",
      "notes": [
        {
          "category": "description",
          "text": "In Autodesk AutoCAD existieren mehrere Schwachstellen. Diese Schwachstellen bestehen beim Parsen verschiedener Dateitypen aufgrund verschiedener Sicherheitsprobleme wie einem Heap-basierten Puffer\u00fcberlauf, einem User-after-free und Out-of-bounds-Problemen unter anderem. Ein entfernter, anonymer Angreifer kann diese Schwachstellen zur Ausf\u00fchrung von beliebigem Code ausnutzen. Eine erfolgreiche Ausnutzung erfordert eine Benutzerinteraktion."
        }
      ],
      "product_status": {
        "known_affected": [
          "T035556"
        ]
      },
      "release_date": "2024-06-18T22:00:00.000+00:00",
      "title": "CVE-2024-23154"
    },
    {
      "cve": "CVE-2024-23155",
      "notes": [
        {
          "category": "description",
          "text": "In Autodesk AutoCAD existieren mehrere Schwachstellen. Diese Schwachstellen bestehen beim Parsen verschiedener Dateitypen aufgrund verschiedener Sicherheitsprobleme wie einem Heap-basierten Puffer\u00fcberlauf, einem User-after-free und Out-of-bounds-Problemen unter anderem. Ein entfernter, anonymer Angreifer kann diese Schwachstellen zur Ausf\u00fchrung von beliebigem Code ausnutzen. Eine erfolgreiche Ausnutzung erfordert eine Benutzerinteraktion."
        }
      ],
      "product_status": {
        "known_affected": [
          "T035556"
        ]
      },
      "release_date": "2024-06-18T22:00:00.000+00:00",
      "title": "CVE-2024-23155"
    },
    {
      "cve": "CVE-2024-23156",
      "notes": [
        {
          "category": "description",
          "text": "In Autodesk AutoCAD existieren mehrere Schwachstellen. Diese Schwachstellen bestehen beim Parsen verschiedener Dateitypen aufgrund verschiedener Sicherheitsprobleme wie einem Heap-basierten Puffer\u00fcberlauf, einem User-after-free und Out-of-bounds-Problemen unter anderem. Ein entfernter, anonymer Angreifer kann diese Schwachstellen zur Ausf\u00fchrung von beliebigem Code ausnutzen. Eine erfolgreiche Ausnutzung erfordert eine Benutzerinteraktion."
        }
      ],
      "product_status": {
        "known_affected": [
          "T035556"
        ]
      },
      "release_date": "2024-06-18T22:00:00.000+00:00",
      "title": "CVE-2024-23156"
    },
    {
      "cve": "CVE-2024-23157",
      "notes": [
        {
          "category": "description",
          "text": "In Autodesk AutoCAD existieren mehrere Schwachstellen. Diese Schwachstellen bestehen beim Parsen verschiedener Dateitypen aufgrund verschiedener Sicherheitsprobleme wie einem Heap-basierten Puffer\u00fcberlauf, einem User-after-free und Out-of-bounds-Problemen unter anderem. Ein entfernter, anonymer Angreifer kann diese Schwachstellen zur Ausf\u00fchrung von beliebigem Code ausnutzen. Eine erfolgreiche Ausnutzung erfordert eine Benutzerinteraktion."
        }
      ],
      "product_status": {
        "known_affected": [
          "T035556"
        ]
      },
      "release_date": "2024-06-18T22:00:00.000+00:00",
      "title": "CVE-2024-23157"
    },
    {
      "cve": "CVE-2024-23158",
      "notes": [
        {
          "category": "description",
          "text": "In Autodesk AutoCAD existieren mehrere Schwachstellen. Diese Schwachstellen bestehen beim Parsen verschiedener Dateitypen aufgrund verschiedener Sicherheitsprobleme wie einem Heap-basierten Puffer\u00fcberlauf, einem User-after-free und Out-of-bounds-Problemen unter anderem. Ein entfernter, anonymer Angreifer kann diese Schwachstellen zur Ausf\u00fchrung von beliebigem Code ausnutzen. Eine erfolgreiche Ausnutzung erfordert eine Benutzerinteraktion."
        }
      ],
      "product_status": {
        "known_affected": [
          "T035556"
        ]
      },
      "release_date": "2024-06-18T22:00:00.000+00:00",
      "title": "CVE-2024-23158"
    },
    {
      "cve": "CVE-2024-23159",
      "notes": [
        {
          "category": "description",
          "text": "In Autodesk AutoCAD existieren mehrere Schwachstellen. Diese Schwachstellen bestehen beim Parsen verschiedener Dateitypen aufgrund verschiedener Sicherheitsprobleme wie einem Heap-basierten Puffer\u00fcberlauf, einem User-after-free und Out-of-bounds-Problemen unter anderem. Ein entfernter, anonymer Angreifer kann diese Schwachstellen zur Ausf\u00fchrung von beliebigem Code ausnutzen. Eine erfolgreiche Ausnutzung erfordert eine Benutzerinteraktion."
        }
      ],
      "product_status": {
        "known_affected": [
          "T035556"
        ]
      },
      "release_date": "2024-06-18T22:00:00.000+00:00",
      "title": "CVE-2024-23159"
    },
    {
      "cve": "CVE-2024-36999",
      "notes": [
        {
          "category": "description",
          "text": "In Autodesk AutoCAD existieren mehrere Schwachstellen. Diese Schwachstellen bestehen beim Parsen verschiedener Dateitypen aufgrund verschiedener Sicherheitsprobleme wie einem Heap-basierten Puffer\u00fcberlauf, einem User-after-free und Out-of-bounds-Problemen unter anderem. Ein entfernter, anonymer Angreifer kann diese Schwachstellen zur Ausf\u00fchrung von beliebigem Code ausnutzen. Eine erfolgreiche Ausnutzung erfordert eine Benutzerinteraktion."
        }
      ],
      "product_status": {
        "known_affected": [
          "T035556"
        ]
      },
      "release_date": "2024-06-18T22:00:00.000+00:00",
      "title": "CVE-2024-36999"
    },
    {
      "cve": "CVE-2024-37007",
      "notes": [
        {
          "category": "description",
          "text": "In Autodesk AutoCAD existieren mehrere Schwachstellen. Diese Schwachstellen bestehen beim Parsen verschiedener Dateitypen aufgrund verschiedener Sicherheitsprobleme wie einem Heap-basierten Puffer\u00fcberlauf, einem User-after-free und Out-of-bounds-Problemen unter anderem. Ein entfernter, anonymer Angreifer kann diese Schwachstellen zur Ausf\u00fchrung von beliebigem Code ausnutzen. Eine erfolgreiche Ausnutzung erfordert eine Benutzerinteraktion."
        }
      ],
      "product_status": {
        "known_affected": [
          "T035556"
        ]
      },
      "release_date": "2024-06-18T22:00:00.000+00:00",
      "title": "CVE-2024-37007"
    }
  ]
}

{
  "affected": [],
  "aliases": [
    "CVE-2024-23156"
  ],
  "database_specific": {
    "cwe_ids": [
      "CWE-119",
      "CWE-787"
    ],
    "github_reviewed": false,
    "github_reviewed_at": null,
    "nvd_published_at": "2024-06-25T04:15:13Z",
    "severity": "HIGH"
  },
  "details": "A maliciously crafted 3DM file, when parsed in opennurbs.dll and ASMkern229A.dll through Autodesk applications, can lead to a memory corruption vulnerability by write access violation. This vulnerability, along with other vulnerabilities, can lead to code execution in the current process.",
  "id": "GHSA-x6j2-4hm4-hxj3",
  "modified": "2024-07-03T18:46:51Z",
  "published": "2024-06-25T06:30:39Z",
  "references": [
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2024-23156"
    },
    {
      "type": "WEB",
      "url": "https://www.autodesk.com/trust/security-advisories/adsk-sa-2024-0010"
    }
  ],
  "schema_version": "1.4.0",
  "severity": [
    {
      "score": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H",
      "type": "CVSS_V3"
    }
  ]
}

{
  "configurations": [
    {
      "nodes": [
        {
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:a:autodesk:autocad:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "F055DD1C-AE4F-4F46-996E-204A51B09FC7",
              "versionEndExcluding": "2022.1.5",
              "versionStartIncluding": "2022",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:a:autodesk:autocad:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "F0AECA1F-5E40-4EC9-9FB6-BE286D629C55",
              "versionEndExcluding": "2023.1.6",
              "versionStartIncluding": "2023",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:a:autodesk:autocad:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "CAEB267C-721B-4AC9-96CE-C3DA951519ED",
              "versionEndExcluding": "2024.1.5",
              "versionStartIncluding": "2024",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:a:autodesk:autocad:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "0B0EF835-F58E-4F6E-B35E-EDAB6F19A9CF",
              "versionEndExcluding": "2025.1",
              "versionStartIncluding": "2025",
              "vulnerable": true
            }
          ],
          "negate": false,
          "operator": "OR"
        }
      ]
    },
    {
      "nodes": [
        {
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:a:autodesk:autocad_architecture:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "B244631D-FEED-490B-BE83-51B166DF7B78",
              "versionEndExcluding": "2022.1.5",
              "versionStartIncluding": "2022",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:a:autodesk:autocad_architecture:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "1CA4601D-6F27-42E1-8685-0430583DEAA8",
              "versionEndExcluding": "2023.1.6",
              "versionStartIncluding": "2023",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:a:autodesk:autocad_architecture:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "6EDB7216-3270-44FB-A236-19CCCD6052D1",
              "versionEndExcluding": "2024.1.5",
              "versionStartIncluding": "2024",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:a:autodesk:autocad_architecture:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "55976EE6-BD1D-4DAB-9091-79962C64719C",
              "versionEndExcluding": "2025.1",
              "versionStartIncluding": "2025",
              "vulnerable": true
            }
          ],
          "negate": false,
          "operator": "OR"
        }
      ]
    },
    {
      "nodes": [
        {
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:a:autodesk:autocad_electrical:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "24FD0AE9-5CBA-4D55-A76A-E8B642ABC4D9",
              "versionEndExcluding": "2022.1.5",
              "versionStartIncluding": "2022",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:a:autodesk:autocad_electrical:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "8AE10283-8906-4A81-ACA0-14F7200AA204",
              "versionEndExcluding": "2023.1.6",
              "versionStartIncluding": "2023",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:a:autodesk:autocad_electrical:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "DF1EF951-7456-4621-A64B-C5C37B21D0FA",
              "versionEndExcluding": "2024.1.5",
              "versionStartIncluding": "2024",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:a:autodesk:autocad_electrical:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "9F533CA0-77A8-46BF-91B3-32A00500E23D",
              "versionEndExcluding": "2025.1",
              "versionStartIncluding": "2025",
              "vulnerable": true
            }
          ],
          "negate": false,
          "operator": "OR"
        }
      ]
    },
    {
      "nodes": [
        {
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:a:autodesk:autocad_map_3d:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "897AE769-8C96-4E4D-BE71-4851A183B725",
              "versionEndExcluding": "2022.1.5",
              "versionStartIncluding": "2022",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:a:autodesk:autocad_map_3d:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "BBEFA684-46BD-4766-BF0B-48243175B61C",
              "versionEndExcluding": "2023.1.6",
              "versionStartIncluding": "2023",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:a:autodesk:autocad_map_3d:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "F186FEF1-C88A-4F14-A30F-5B688FA5100C",
              "versionEndExcluding": "2024.1.5",
              "versionStartIncluding": "2024",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:a:autodesk:autocad_map_3d:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "BFDF5574-487C-4F12-96AD-6CB85D170D84",
              "versionEndExcluding": "2025.1",
              "versionStartIncluding": "2025",
              "vulnerable": true
            }
          ],
          "negate": false,
          "operator": "OR"
        }
      ]
    },
    {
      "nodes": [
        {
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:a:autodesk:autocad_mechanical:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "0C25DA26-ACF6-4810-A515-BD0C387DBA42",
              "versionEndExcluding": "2022.1.5",
              "versionStartIncluding": "2022",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:a:autodesk:autocad_mechanical:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "93D53690-4790-401B-BEFF-528381C36218",
              "versionEndExcluding": "2023.1.6",
              "versionStartIncluding": "2023",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:a:autodesk:autocad_mechanical:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "92C4C49E-FBB7-431B-AE0F-2BC74DB08338",
              "versionEndExcluding": "2024.1.5",
              "versionStartIncluding": "2024",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:a:autodesk:autocad_mechanical:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "4937D51A-6B3B-4A7A-AD57-806814812946",
              "versionEndExcluding": "2025.1",
              "versionStartIncluding": "2025",
              "vulnerable": true
            }
          ],
          "negate": false,
          "operator": "OR"
        }
      ]
    },
    {
      "nodes": [
        {
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:a:autodesk:autocad_mep:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "0D4DDC78-6974-4097-BA37-F92B1194CDE2",
              "versionEndExcluding": "2022.1.5",
              "versionStartIncluding": "2022",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:a:autodesk:autocad_mep:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "E678BEF6-B064-401E-92C6-247EC258FE07",
              "versionEndExcluding": "2023.1.6",
              "versionStartIncluding": "2023",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:a:autodesk:autocad_mep:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "93BCB8FD-3AE4-4C9F-A2A6-0D63CC5EE0B4",
              "versionEndExcluding": "2024.1.5",
              "versionStartIncluding": "2024",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:a:autodesk:autocad_mep:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "70F538D1-54CE-47AF-ADDA-C530A154DD5E",
              "versionEndExcluding": "2025.1",
              "versionStartIncluding": "2025",
              "vulnerable": true
            }
          ],
          "negate": false,
          "operator": "OR"
        }
      ]
    },
    {
      "nodes": [
        {
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:a:autodesk:autocad_plant_3d:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "CD7A1D9B-EF32-4415-BCC4-04E2A6972374",
              "versionEndExcluding": "2022.1.5",
              "versionStartIncluding": "2022",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:a:autodesk:autocad_plant_3d:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "65D59F58-0AA2-4D15-8C75-146CAEC19584",
              "versionEndExcluding": "2023.1.6",
              "versionStartIncluding": "2023",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:a:autodesk:autocad_plant_3d:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "8FC9B921-51F6-4A2B-A0AC-171FF1192C93",
              "versionEndExcluding": "2024.1.5",
              "versionStartIncluding": "2024",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:a:autodesk:autocad_plant_3d:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "BF817DAD-6928-4155-B005-430342CDA30B",
              "versionEndExcluding": "2025.1",
              "versionStartIncluding": "2025",
              "vulnerable": true
            }
          ],
          "negate": false,
          "operator": "OR"
        }
      ]
    },
    {
      "nodes": [
        {
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:a:autodesk:civil_3d:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "BF37A9E5-8B00-44AB-AFFF-CC89D2A96889",
              "versionEndExcluding": "2022.1.5",
              "versionStartIncluding": "2022",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:a:autodesk:civil_3d:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "F1309864-F4E5-4BF7-8453-F863F8C463CF",
              "versionEndExcluding": "2023.1.6",
              "versionStartIncluding": "2023",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:a:autodesk:civil_3d:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "7589C389-71FF-4E79-B51F-1C36FC72F81D",
              "versionEndExcluding": "2024.1.5",
              "versionStartIncluding": "2024",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:a:autodesk:civil_3d:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "E35E9352-AEC7-4185-BCBC-103000D084BD",
              "versionEndExcluding": "2025.1",
              "versionStartIncluding": "2025",
              "vulnerable": true
            }
          ],
          "negate": false,
          "operator": "OR"
        }
      ]
    },
    {
      "nodes": [
        {
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:a:autodesk:advance_steel:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "2E36BB72-4307-4DFC-AFC9-2A99EDEB5BB4",
              "versionEndExcluding": "2022.1.5",
              "versionStartIncluding": "2022",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:a:autodesk:advance_steel:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "C56F6AFC-3A8A-4FEE-8D55-184129DD08F6",
              "versionEndExcluding": "2023.1.6",
              "versionStartIncluding": "2023",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:a:autodesk:advance_steel:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "982A47A1-FAA7-45DB-A054-F13B13F3CA49",
              "versionEndExcluding": "2024.1.5",
              "versionStartIncluding": "2024",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:a:autodesk:advance_steel:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "33337803-1300-419A-B980-7689C7C93F81",
              "versionEndExcluding": "2025.1",
              "versionStartIncluding": "2025",
              "vulnerable": true
            }
          ],
          "negate": false,
          "operator": "OR"
        }
      ]
    }
  ],
  "cveTags": [],
  "descriptions": [
    {
      "lang": "en",
      "value": "A maliciously crafted 3DM file, when parsed in opennurbs.dll and ASMkern229A.dll through Autodesk applications, can lead to a memory corruption vulnerability by write access violation. This vulnerability, along with other vulnerabilities, can lead to code execution in the current process."
    },
    {
      "lang": "es",
      "value": "Un archivo 3DM creado con fines malintencionados, cuando se analiza en opennurbs.dll y ASMkern229A.dll a trav\u00e9s de aplicaciones de Autodesk, puede provocar una vulnerabilidad de corrupci\u00f3n de memoria por infracci\u00f3n de acceso de escritura. Esta vulnerabilidad, junto con otras vulnerabilidades, puede provocar la ejecuci\u00f3n de c\u00f3digo en el proceso actual."
    }
  ],
  "id": "CVE-2024-23156",
  "lastModified": "2025-05-06T19:43:16.420",
  "metrics": {
    "cvssMetricV31": [
      {
        "cvssData": {
          "attackComplexity": "LOW",
          "attackVector": "LOCAL",
          "availabilityImpact": "HIGH",
          "baseScore": 7.8,
          "baseSeverity": "HIGH",
          "confidentialityImpact": "HIGH",
          "integrityImpact": "HIGH",
          "privilegesRequired": "NONE",
          "scope": "UNCHANGED",
          "userInteraction": "REQUIRED",
          "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H",
          "version": "3.1"
        },
        "exploitabilityScore": 1.8,
        "impactScore": 5.9,
        "source": "psirt@autodesk.com",
        "type": "Secondary"
      },
      {
        "cvssData": {
          "attackComplexity": "LOW",
          "attackVector": "LOCAL",
          "availabilityImpact": "HIGH",
          "baseScore": 7.8,
          "baseSeverity": "HIGH",
          "confidentialityImpact": "HIGH",
          "integrityImpact": "HIGH",
          "privilegesRequired": "NONE",
          "scope": "UNCHANGED",
          "userInteraction": "REQUIRED",
          "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H",
          "version": "3.1"
        },
        "exploitabilityScore": 1.8,
        "impactScore": 5.9,
        "source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
        "type": "Secondary"
      }
    ]
  },
  "published": "2024-06-25T04:15:13.450",
  "references": [
    {
      "source": "psirt@autodesk.com",
      "tags": [
        "Vendor Advisory"
      ],
      "url": "https://www.autodesk.com/trust/security-advisories/adsk-sa-2024-0010"
    },
    {
      "source": "af854a3a-2127-422b-91ae-364da2661108",
      "tags": [
        "Vendor Advisory"
      ],
      "url": "https://www.autodesk.com/trust/security-advisories/adsk-sa-2024-0010"
    }
  ],
  "sourceIdentifier": "psirt@autodesk.com",
  "vulnStatus": "Analyzed",
  "weaknesses": [
    {
      "description": [
        {
          "lang": "en",
          "value": "CWE-119"
        }
      ],
      "source": "psirt@autodesk.com",
      "type": "Secondary"
    },
    {
      "description": [
        {
          "lang": "en",
          "value": "CWE-787"
        }
      ],
      "source": "nvd@nist.gov",
      "type": "Primary"
    }
  ]
}