cve-2024-49888
Vulnerability from cvelistv5
Published
2024-10-21 18:01
Modified
2024-12-19 09:28
Severity ?
Summary
In the Linux kernel, the following vulnerability has been resolved: bpf: Fix a sdiv overflow issue Zac Ecob reported a problem where a bpf program may cause kernel crash due to the following error: Oops: divide error: 0000 [#1] PREEMPT SMP KASAN PTI The failure is due to the below signed divide: LLONG_MIN/-1 where LLONG_MIN equals to -9,223,372,036,854,775,808. LLONG_MIN/-1 is supposed to give a positive number 9,223,372,036,854,775,808, but it is impossible since for 64-bit system, the maximum positive number is 9,223,372,036,854,775,807. On x86_64, LLONG_MIN/-1 will cause a kernel exception. On arm64, the result for LLONG_MIN/-1 is LLONG_MIN. Further investigation found all the following sdiv/smod cases may trigger an exception when bpf program is running on x86_64 platform: - LLONG_MIN/-1 for 64bit operation - INT_MIN/-1 for 32bit operation - LLONG_MIN%-1 for 64bit operation - INT_MIN%-1 for 32bit operation where -1 can be an immediate or in a register. On arm64, there are no exceptions: - LLONG_MIN/-1 = LLONG_MIN - INT_MIN/-1 = INT_MIN - LLONG_MIN%-1 = 0 - INT_MIN%-1 = 0 where -1 can be an immediate or in a register. Insn patching is needed to handle the above cases and the patched codes produced results aligned with above arm64 result. The below are pseudo codes to handle sdiv/smod exceptions including both divisor -1 and divisor 0 and the divisor is stored in a register. sdiv: tmp = rX tmp += 1 /* [-1, 0] -> [0, 1] if tmp >(unsigned) 1 goto L2 if tmp == 0 goto L1 rY = 0 L1: rY = -rY; goto L3 L2: rY /= rX L3: smod: tmp = rX tmp += 1 /* [-1, 0] -> [0, 1] if tmp >(unsigned) 1 goto L1 if tmp == 1 (is64 ? goto L2 : goto L3) rY = 0; goto L2 L1: rY %= rX L2: goto L4 // only when !is64 L3: wY = wY // only when !is64 L4: [1] https://lore.kernel.org/bpf/tPJLTEh7S_DxFEqAI2Ji5MBSoZVg7_G-Py2iaZpAaWtM961fFTWtsnlzwvTbzBzaUzwQAoNATXKUlt0LZOFgnDcIyKCswAnAGdUF3LBrhGQ=@protonmail.com/
References
416baaa9-dc9f-4396-8d5f-8c081fb06d67https://git.kernel.org/stable/c/4902a6a0dc593c82055fc8c9ada371bafe26c9ccPatch
416baaa9-dc9f-4396-8d5f-8c081fb06d67https://git.kernel.org/stable/c/7dd34d7b7dcf9309fc6224caf4dd5b35bedddcb7Patch
416baaa9-dc9f-4396-8d5f-8c081fb06d67https://git.kernel.org/stable/c/d22e45a369afc7c28f11acfa5b5e8e478227ca5dPatch
Impacted products
Vendor Product Version
Linux Linux Version: 6.6
Show details on NVD website

To clipboard 

{
  "containers": {
    "adp": [
      {
        "metrics": [
          {
            "other": {
              "content": {
                "id": "CVE-2024-49888",
                "options": [
                  {
                    "Exploitation": "none"
                  },
                  {
                    "Automatable": "no"
                  },
                  {
                    "Technical Impact": "partial"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2024-10-22T13:44:44.632925Z",
                "version": "2.0.3"
              },
              "type": "ssvc"
            }
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2024-10-22T13:48:49.455Z",
          "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
          "shortName": "CISA-ADP"
        },
        "title": "CISA ADP Vulnrichment"
      }
    ],
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "product": "Linux",
          "programFiles": [
            "kernel/bpf/verifier.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "lessThan": "4902a6a0dc593c82055fc8c9ada371bafe26c9cc",
              "status": "affected",
              "version": "ec0e2da95f72d4a46050a4d994e4fe471474fd80",
              "versionType": "git"
            },
            {
              "lessThan": "d22e45a369afc7c28f11acfa5b5e8e478227ca5d",
              "status": "affected",
              "version": "ec0e2da95f72d4a46050a4d994e4fe471474fd80",
              "versionType": "git"
            },
            {
              "lessThan": "7dd34d7b7dcf9309fc6224caf4dd5b35bedddcb7",
              "status": "affected",
              "version": "ec0e2da95f72d4a46050a4d994e4fe471474fd80",
              "versionType": "git"
            }
          ]
        },
        {
          "defaultStatus": "affected",
          "product": "Linux",
          "programFiles": [
            "kernel/bpf/verifier.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "6.6"
            },
            {
              "lessThan": "6.6",
              "status": "unaffected",
              "version": "0",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.10.*",
              "status": "unaffected",
              "version": "6.10.14",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.11.*",
              "status": "unaffected",
              "version": "6.11.3",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "*",
              "status": "unaffected",
              "version": "6.12",
              "versionType": "original_commit_for_fix"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nbpf: Fix a sdiv overflow issue\n\nZac Ecob reported a problem where a bpf program may cause kernel crash due\nto the following error:\n  Oops: divide error: 0000 [#1] PREEMPT SMP KASAN PTI\n\nThe failure is due to the below signed divide:\n  LLONG_MIN/-1 where LLONG_MIN equals to -9,223,372,036,854,775,808.\nLLONG_MIN/-1 is supposed to give a positive number 9,223,372,036,854,775,808,\nbut it is impossible since for 64-bit system, the maximum positive\nnumber is 9,223,372,036,854,775,807. On x86_64, LLONG_MIN/-1 will\ncause a kernel exception. On arm64, the result for LLONG_MIN/-1 is\nLLONG_MIN.\n\nFurther investigation found all the following sdiv/smod cases may trigger\nan exception when bpf program is running on x86_64 platform:\n  - LLONG_MIN/-1 for 64bit operation\n  - INT_MIN/-1 for 32bit operation\n  - LLONG_MIN%-1 for 64bit operation\n  - INT_MIN%-1 for 32bit operation\nwhere -1 can be an immediate or in a register.\n\nOn arm64, there are no exceptions:\n  - LLONG_MIN/-1 = LLONG_MIN\n  - INT_MIN/-1 = INT_MIN\n  - LLONG_MIN%-1 = 0\n  - INT_MIN%-1 = 0\nwhere -1 can be an immediate or in a register.\n\nInsn patching is needed to handle the above cases and the patched codes\nproduced results aligned with above arm64 result. The below are pseudo\ncodes to handle sdiv/smod exceptions including both divisor -1 and divisor 0\nand the divisor is stored in a register.\n\nsdiv:\n      tmp = rX\n      tmp += 1 /* [-1, 0] -\u003e [0, 1]\n      if tmp \u003e(unsigned) 1 goto L2\n      if tmp == 0 goto L1\n      rY = 0\n  L1:\n      rY = -rY;\n      goto L3\n  L2:\n      rY /= rX\n  L3:\n\nsmod:\n      tmp = rX\n      tmp += 1 /* [-1, 0] -\u003e [0, 1]\n      if tmp \u003e(unsigned) 1 goto L1\n      if tmp == 1 (is64 ? goto L2 : goto L3)\n      rY = 0;\n      goto L2\n  L1:\n      rY %= rX\n  L2:\n      goto L4  // only when !is64\n  L3:\n      wY = wY  // only when !is64\n  L4:\n\n  [1] https://lore.kernel.org/bpf/tPJLTEh7S_DxFEqAI2Ji5MBSoZVg7_G-Py2iaZpAaWtM961fFTWtsnlzwvTbzBzaUzwQAoNATXKUlt0LZOFgnDcIyKCswAnAGdUF3LBrhGQ=@protonmail.com/"
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2024-12-19T09:28:24.923Z",
        "orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "shortName": "Linux"
      },
      "references": [
        {
          "url": "https://git.kernel.org/stable/c/4902a6a0dc593c82055fc8c9ada371bafe26c9cc"
        },
        {
          "url": "https://git.kernel.org/stable/c/d22e45a369afc7c28f11acfa5b5e8e478227ca5d"
        },
        {
          "url": "https://git.kernel.org/stable/c/7dd34d7b7dcf9309fc6224caf4dd5b35bedddcb7"
        }
      ],
      "title": "bpf: Fix a sdiv overflow issue",
      "x_generator": {
        "engine": "bippy-5f407fcff5a0"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
    "assignerShortName": "Linux",
    "cveId": "CVE-2024-49888",
    "datePublished": "2024-10-21T18:01:24.235Z",
    "dateReserved": "2024-10-21T12:17:06.022Z",
    "dateUpdated": "2024-12-19T09:28:24.923Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.1",
  "vulnerability-lookup:meta": {
    "nvd": "{\"cve\":{\"id\":\"CVE-2024-49888\",\"sourceIdentifier\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\",\"published\":\"2024-10-21T18:15:11.443\",\"lastModified\":\"2024-11-13T14:54:25.787\",\"vulnStatus\":\"Analyzed\",\"cveTags\":[],\"descriptions\":[{\"lang\":\"en\",\"value\":\"In the Linux kernel, the following vulnerability has been resolved:\\n\\nbpf: Fix a sdiv overflow issue\\n\\nZac Ecob reported a problem where a bpf program may cause kernel crash due\\nto the following error:\\n  Oops: divide error: 0000 [#1] PREEMPT SMP KASAN PTI\\n\\nThe failure is due to the below signed divide:\\n  LLONG_MIN/-1 where LLONG_MIN equals to -9,223,372,036,854,775,808.\\nLLONG_MIN/-1 is supposed to give a positive number 9,223,372,036,854,775,808,\\nbut it is impossible since for 64-bit system, the maximum positive\\nnumber is 9,223,372,036,854,775,807. On x86_64, LLONG_MIN/-1 will\\ncause a kernel exception. On arm64, the result for LLONG_MIN/-1 is\\nLLONG_MIN.\\n\\nFurther investigation found all the following sdiv/smod cases may trigger\\nan exception when bpf program is running on x86_64 platform:\\n  - LLONG_MIN/-1 for 64bit operation\\n  - INT_MIN/-1 for 32bit operation\\n  - LLONG_MIN%-1 for 64bit operation\\n  - INT_MIN%-1 for 32bit operation\\nwhere -1 can be an immediate or in a register.\\n\\nOn arm64, there are no exceptions:\\n  - LLONG_MIN/-1 = LLONG_MIN\\n  - INT_MIN/-1 = INT_MIN\\n  - LLONG_MIN%-1 = 0\\n  - INT_MIN%-1 = 0\\nwhere -1 can be an immediate or in a register.\\n\\nInsn patching is needed to handle the above cases and the patched codes\\nproduced results aligned with above arm64 result. The below are pseudo\\ncodes to handle sdiv/smod exceptions including both divisor -1 and divisor 0\\nand the divisor is stored in a register.\\n\\nsdiv:\\n      tmp = rX\\n      tmp += 1 /* [-1, 0] -\u003e [0, 1]\\n      if tmp \u003e(unsigned) 1 goto L2\\n      if tmp == 0 goto L1\\n      rY = 0\\n  L1:\\n      rY = -rY;\\n      goto L3\\n  L2:\\n      rY /= rX\\n  L3:\\n\\nsmod:\\n      tmp = rX\\n      tmp += 1 /* [-1, 0] -\u003e [0, 1]\\n      if tmp \u003e(unsigned) 1 goto L1\\n      if tmp == 1 (is64 ? goto L2 : goto L3)\\n      rY = 0;\\n      goto L2\\n  L1:\\n      rY %= rX\\n  L2:\\n      goto L4  // only when !is64\\n  L3:\\n      wY = wY  // only when !is64\\n  L4:\\n\\n  [1] https://lore.kernel.org/bpf/tPJLTEh7S_DxFEqAI2Ji5MBSoZVg7_G-Py2iaZpAaWtM961fFTWtsnlzwvTbzBzaUzwQAoNATXKUlt0LZOFgnDcIyKCswAnAGdUF3LBrhGQ=@protonmail.com/\"},{\"lang\":\"es\",\"value\":\"En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: bpf: soluciona un problema de desbordamiento de sdiv Zac Ecob inform\u00f3 de un problema en el que un programa bpf puede provocar un fallo del kernel debido al siguiente error: Oops: error de divisi\u00f3n: 0000 [#1] PREEMPT SMP KASAN PTI El fallo se debe a la siguiente divisi\u00f3n con signo: LLONG_MIN/-1 donde LLONG_MIN equivale a -9.223.372.036.854.775.808. Se supone que LLONG_MIN/-1 da un n\u00famero positivo 9.223.372.036.854.775.808, pero es imposible ya que para sistemas de 64 bits, el n\u00famero positivo m\u00e1ximo es 9.223.372.036.854.775.807. En x86_64, LLONG_MIN/-1 provocar\u00e1 una excepci\u00f3n del kernel. En arm64, el resultado para LLONG_MIN/-1 es LLONG_MIN. Una investigaci\u00f3n m\u00e1s profunda encontr\u00f3 que todos los siguientes casos de sdiv/smod pueden activar una excepci\u00f3n cuando el programa bpf se ejecuta en la plataforma x86_64: - LLONG_MIN/-1 para operaci\u00f3n de 64 bits - INT_MIN/-1 para operaci\u00f3n de 32 bits - LLONG_MIN%-1 para operaci\u00f3n de 64 bits - INT_MIN%-1 para operaci\u00f3n de 32 bits donde -1 puede ser inmediato o en un registro. En arm64, no hay excepciones: - LLONG_MIN/-1 = LLONG_MIN - INT_MIN/-1 = INT_MIN - LLONG_MIN%-1 = 0 - INT_MIN%-1 = 0 donde -1 puede ser inmediato o en un registro. Se necesita aplicar un parche a Insn para manejar los casos anteriores y los c\u00f3digos parcheados produjeron resultados alineados con el resultado de arm64 anterior. Los siguientes son pseudoc\u00f3digos para manejar excepciones sdiv/smod incluyendo tanto el divisor -1 como el divisor 0 y el divisor se almacena en un registro. sdiv: tmp = rX tmp += 1 /* [-1, 0] -\u0026gt; [0, 1] if tmp \u0026gt;(unsigned) 1 goto L2 if tmp == 0 goto L1 rY = 0 L1: rY = -rY; goto L3 L2: rY /= rX L3: smod: tmp = rX tmp += 1 /* [-1, 0] -\u0026gt; [0, 1] if tmp \u0026gt;(unsigned) 1 goto L1 if tmp == 1 (is64 ? goto L2 : goto L3) rY = 0; goto L2 L1: rY %= rX L2: goto L4 // solo cuando !is64 L3: wY = wY // solo cuando !is64 L4: [1] https://lore.kernel.org/bpf/tPJLTEh7S_DxFEqAI2Ji5MBSoZVg7_G-Py2iaZpAaWtM961fFTWtsnlzwvTbzBzaUzwQAoNATXKUlt0LZOFgnDcIyKCswAnAGdUF3LBrhGQ=@protonmail.com/\"}],\"metrics\":{\"cvssMetricV31\":[{\"source\":\"nvd@nist.gov\",\"type\":\"Primary\",\"cvssData\":{\"version\":\"3.1\",\"vectorString\":\"CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H\",\"baseScore\":5.5,\"baseSeverity\":\"MEDIUM\",\"attackVector\":\"LOCAL\",\"attackComplexity\":\"LOW\",\"privilegesRequired\":\"LOW\",\"userInteraction\":\"NONE\",\"scope\":\"UNCHANGED\",\"confidentialityImpact\":\"NONE\",\"integrityImpact\":\"NONE\",\"availabilityImpact\":\"HIGH\"},\"exploitabilityScore\":1.8,\"impactScore\":3.6}]},\"weaknesses\":[{\"source\":\"nvd@nist.gov\",\"type\":\"Primary\",\"description\":[{\"lang\":\"en\",\"value\":\"CWE-190\"}]}],\"configurations\":[{\"nodes\":[{\"operator\":\"OR\",\"negate\":false,\"cpeMatch\":[{\"vulnerable\":true,\"criteria\":\"cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*\",\"versionEndExcluding\":\"6.10.14\",\"matchCriteriaId\":\"652638C5-5F25-4DF3-AD42-DD3252A97152\"},{\"vulnerable\":true,\"criteria\":\"cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*\",\"versionStartIncluding\":\"6.11\",\"versionEndExcluding\":\"6.11.3\",\"matchCriteriaId\":\"54D9C704-D679-41A7-9C40-10A6B1E7FFE9\"}]}]}],\"references\":[{\"url\":\"https://git.kernel.org/stable/c/4902a6a0dc593c82055fc8c9ada371bafe26c9cc\",\"source\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\",\"tags\":[\"Patch\"]},{\"url\":\"https://git.kernel.org/stable/c/7dd34d7b7dcf9309fc6224caf4dd5b35bedddcb7\",\"source\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\",\"tags\":[\"Patch\"]},{\"url\":\"https://git.kernel.org/stable/c/d22e45a369afc7c28f11acfa5b5e8e478227ca5d\",\"source\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\",\"tags\":[\"Patch\"]}]}}"
  }
}


Log in or create an account to share your comment.




Tags
Taxonomy of the tags.




Sightings

Author Source Type Date

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or seen somewhere by the user.
  • Confirmed: The vulnerability is confirmed from an analyst perspective.
  • Exploited: This vulnerability was exploited and seen by the user reporting the sighting.
  • Patched: This vulnerability was successfully patched by the user reporting the sighting.
  • Not exploited: This vulnerability was not exploited or seen by the user reporting the sighting.
  • Not confirmed: The user expresses doubt about the veracity of the vulnerability.
  • Not patched: This vulnerability was not successfully patched by the user reporting the sighting.