{
  "document": {
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Disclosure is not limited. (TLPv2: TLP:CLEAR)",
      "tlp": {
        "label": "WHITE"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the firmware version V3.1 for the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP (incl. SIPLUS variant).\n\nThese GNU/Linux vulnerabilities have been externally identified. Siemens is preparing fix versions and recommends specific countermeasures for products where fixes are not, or not yet available.\n\nNote: This SSA advises vulnerabilities for firmware version V3.1 only; for versions \u003c V3.1 refer to Siemens Security Bulletin SSB-439005 (\nhttps://cert-portal.siemens.com/productcert/html/ssb-439005.html).",
        "title": "Summary"
      },
      {
        "category": "general",
        "text": "As a general security measure, Siemens strongly recommends to protect network access to devices with appropriate mechanisms. In order to operate the devices in a protected IT environment, Siemens recommends to configure the environment according to Siemens\u0027 operational guidelines for Industrial Security (Download: \nhttps://www.siemens.com/cert/operational-guidelines-industrial-security), and to follow the recommendations in the product manuals.\nAdditional information on Industrial Security by Siemens can be found at: https://www.siemens.com/industrialsecurity",
        "title": "General Recommendations"
      },
      {
        "category": "general",
        "text": "For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories",
        "title": "Additional Resources"
      },
      {
        "category": "legal_disclaimer",
        "text": "Siemens Security Advisories are subject to the terms and conditions contained in Siemens\u0027 underlying license terms or other applicable agreements previously agreed to with Siemens (hereinafter \"License Terms\"). To the extent applicable to information, software or documentation made available in or through a Siemens Security Advisory, the Terms of Use of Siemens\u0027 Global Website (https://www.siemens.com/terms_of_use, hereinafter \"Terms of Use\"), in particular Sections 8-10 of the Terms of Use, shall apply additionally. In case of conflicts, the License Terms shall prevail over the Terms of Use.",
        "title": "Terms of Use"
      }
    ],
    "publisher": {
      "category": "vendor",
      "contact_details": "productcert@siemens.com",
      "name": "Siemens ProductCERT",
      "namespace": "https://www.siemens.com"
    },
    "references": [
      {
        "category": "self",
        "summary": "SSA-398330: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP V3.1 - HTML Version",
        "url": "https://cert-portal.siemens.com/productcert/html/ssa-398330.html"
      },
      {
        "category": "self",
        "summary": "SSA-398330: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP V3.1 - CSAF Version",
        "url": "https://cert-portal.siemens.com/productcert/csaf/ssa-398330.json"
      },
      {
        "category": "self",
        "summary": "SSA-398330: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP V3.1 - PDF Version",
        "url": "https://cert-portal.siemens.com/productcert/pdf/ssa-398330.pdf"
      },
      {
        "category": "self",
        "summary": "SSA-398330: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP V3.1 - TXT Version",
        "url": "https://cert-portal.siemens.com/productcert/txt/ssa-398330.txt"
      }
    ],
    "title": "SSA-398330: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP V3.1",
    "tracking": {
      "current_release_date": "2024-06-11T00:00:00Z",
      "generator": {
        "engine": {
          "name": "Siemens ProductCERT CSAF Generator",
          "version": "1"
        }
      },
      "id": "SSA-398330",
      "initial_release_date": "2023-12-12T00:00:00Z",
      "revision_history": [
        {
          "date": "2023-12-12T00:00:00Z",
          "legacy_version": "1.0",
          "number": "1",
          "summary": "Publication Date"
        },
        {
          "date": "2024-01-09T00:00:00Z",
          "legacy_version": "1.1",
          "number": "2",
          "summary": "Added CVE-2021-44879, CVE-2023-46218, CVE-2023-46219, and CVE-2023-48795"
        },
        {
          "date": "2024-02-13T00:00:00Z",
          "legacy_version": "1.2",
          "number": "3",
          "summary": "Added CVE-2023-45898, CVE-2023-46862, CVE-2023-6121, CVE-2023-6817, CVE-2023-6931, CVE-2023-6932, CVE-2024-0584"
        },
        {
          "date": "2024-03-12T00:00:00Z",
          "legacy_version": "1.3",
          "number": "4",
          "summary": "Added CVE-2023-52425, CVE-2023-52426, CVE-2023-45918"
        },
        {
          "date": "2024-04-09T00:00:00Z",
          "legacy_version": "1.4",
          "number": "5",
          "summary": "Added CVE-2024-28757"
        },
        {
          "date": "2024-05-14T00:00:00Z",
          "legacy_version": "1.5",
          "number": "6",
          "summary": "Added CVE-2024-2004, CVE-2024-2379, CVE-2024-2398, CVE-2024-2466, CVE-2024-2511, CVE-2024-28085, CVE-2024-28182, CVE-2024-28834, CVE-2024-28835"
        },
        {
          "date": "2024-06-11T00:00:00Z",
          "legacy_version": "1.6",
          "number": "7",
          "summary": "Added CVE-2024-2961, CVE-2024-33599, CVE-2024-33600, CVE-2024-33601, CVE-2024-33602, CVE-2024-34459"
        }
      ],
      "status": "interim",
      "version": "7"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003e=V3.1.0",
                "product": {
                  "name": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)",
                  "product_id": "1",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6ES7518-4AX00-1AB0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003e=V3.1.0",
                "product": {
                  "name": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)",
                  "product_id": "2",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6ES7518-4AX00-1AC0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003e=V3.1.0",
                "product": {
                  "name": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)",
                  "product_id": "3",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6ES7518-4FX00-1AB0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003e=V3.1.0",
                "product": {
                  "name": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)",
                  "product_id": "4",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6ES7518-4FX00-1AC0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003e=V3.1.0",
                "product": {
                  "name": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)",
                  "product_id": "5",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6AG1518-4AX00-4AC0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)"
          }
        ],
        "category": "vendor",
        "name": "Siemens"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2013-0340",
      "cwe": {
        "id": "CWE-611",
        "name": "Improper Restriction of XML External Entity Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "expat 2.1.0 and earlier does not properly handle entities expansion unless an application developer uses the XML_SetEntityDeclHandler function, which allows remote attackers to cause a denial of service (resource consumption), send HTTP requests to intranet servers, or read arbitrary files via a crafted XML document, aka an XML External Entity (XXE) issue.  NOTE: it could be argued that because expat already provides the ability to disable external entity expansion, the responsibility for resolving this issue lies with application developers; according to this argument, this entry should be REJECTed, and each affected application would need its own CVE.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2013-0340"
    },
    {
      "cve": "CVE-2013-4235",
      "cwe": {
        "id": "CWE-367",
        "name": "Time-of-check Time-of-use (TOCTOU) Race Condition"
      },
      "notes": [
        {
          "category": "summary",
          "text": "shadow: TOCTOU (time-of-check time-of-use) race condition when copying and removing directory trees",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2013-4235"
    },
    {
      "cve": "CVE-2014-7209",
      "cwe": {
        "id": "CWE-77",
        "name": "Improper Neutralization of Special Elements used in a Command (\u0027Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "run-mailcap in the Debian mime-support package before 3.52-1+deb7u1 allows context-dependent attackers to execute arbitrary commands via shell metacharacters in a filename.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.0,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:R/S:C/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2014-7209"
    },
    {
      "cve": "CVE-2015-20107",
      "cwe": {
        "id": "CWE-77",
        "name": "Improper Neutralization of Special Elements used in a Command (\u0027Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Python (aka CPython) up to 3.10.8, the mailcap module does not add escape characters into commands discovered in the system mailcap file. This may allow attackers to inject shell commands into applications that call mailcap.findmatch with untrusted input (if they lack validation of user-provided filenames or arguments). The fix is also back-ported to 3.7, 3.8, 3.9",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.6,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:H/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2015-20107"
    },
    {
      "cve": "CVE-2016-3189",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Use-after-free vulnerability in bzip2recover in bzip2 1.0.6 allows remote attackers to cause a denial of service (crash) via a crafted bzip2 file, related to block ends set to before the start of the block.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2016-3189"
    },
    {
      "cve": "CVE-2016-3709",
      "cwe": {
        "id": "CWE-79",
        "name": "Improper Neutralization of Input During Web Page Generation (\u0027Cross-site Scripting\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Possible cross-site scripting vulnerability in libxml after commit 960f0e2.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2016-3709"
    },
    {
      "cve": "CVE-2016-4658",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "xpointer.c in libxml2 before 2.9.5 (as used in Apple iOS before 10, OS X before 10.12, tvOS before 10, and watchOS before 3, and other products) does not forbid namespace nodes in XPointer ranges, which allows remote attackers to execute arbitrary code or cause a denial of service (use-after-free and memory corruption) via a crafted XML document.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2016-4658"
    },
    {
      "cve": "CVE-2016-5131",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Use-after-free vulnerability in libxml2 through 2.9.4, as used in Google Chrome before 52.0.2743.82, allows remote attackers to cause a denial of service or possibly have unspecified other impact via vectors related to the XPointer range-to function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2016-5131"
    },
    {
      "cve": "CVE-2016-9318",
      "cwe": {
        "id": "CWE-611",
        "name": "Improper Restriction of XML External Entity Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libxml2 2.9.4 and earlier, as used in XMLSec 1.2.23 and earlier and other products, does not offer a flag directly indicating that the current document may be read but other files may not be opened, which makes it easier for remote attackers to conduct XML External Entity (XXE) attacks via a crafted document.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2016-9318"
    },
    {
      "cve": "CVE-2016-10228",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The iconv program in the GNU C Library (aka glibc or libc6) 2.31 and earlier, when invoked with multiple suffixes in the destination encoding (TRANSLATE or IGNORE) along with the -c option, enters an infinite loop when processing invalid multi-byte input sequences, leading to a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2016-10228"
    },
    {
      "cve": "CVE-2016-10739",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the GNU C Library (aka glibc or libc6) through 2.28, the getaddrinfo function would successfully parse a string that contained an IPv4 address followed by whitespace and arbitrary characters, which could lead applications to incorrectly assume that it had parsed a valid string, without the possibility of embedded HTTP headers or other potentially dangerous substrings.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2016-10739"
    },
    {
      "cve": "CVE-2017-0663",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A remote code execution vulnerability in libxml2 could enable an attacker using a specially crafted file to execute arbitrary code within the context of an unprivileged process. This issue is rated as High due to the possibility of remote code execution in an application that uses this library. Product: Android. Versions: 4.4.4, 5.0.2, 5.1.1, 6.0, 6.0.1, 7.0, 7.1.1, 7.1.2. Android ID: A-37104170.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2017-0663"
    },
    {
      "cve": "CVE-2017-7375",
      "cwe": {
        "id": "CWE-611",
        "name": "Improper Restriction of XML External Entity Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw in libxml2 allows remote XML entity inclusion with default parser flags (i.e., when the caller did not request entity substitution, DTD validation, external DTD subset loading, or default DTD attributes). Depending on the context, this may expose a higher-risk attack surface in libxml2 not usually reachable with default parser flags, and expose content from local files, HTTP, or FTP servers (which might be otherwise unreachable).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2017-7375"
    },
    {
      "cve": "CVE-2017-7376",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer overflow in libxml2 allows remote attackers to execute arbitrary code by leveraging an incorrect limit for port values when handling redirects.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2017-7376"
    },
    {
      "cve": "CVE-2017-9047",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A buffer overflow was discovered in libxml2 20904-GITv2.9.4-16-g0741801. The function xmlSnprintfElementContent in valid.c is supposed to recursively dump the element content definition into a char buffer \u0027buf\u0027 of size \u0027size\u0027. The variable len is assigned strlen(buf). If the content-\u003etype is XML_ELEMENT_CONTENT_ELEMENT, then (i) the content-\u003eprefix is appended to buf (if it actually fits) whereupon (ii) content-\u003ename is written to the buffer. However, the check for whether the content-\u003ename actually fits also uses \u0027len\u0027 rather than the updated buffer length strlen(buf). This allows us to write about \"size\" many bytes beyond the allocated memory. This vulnerability causes programs that use libxml2, such as PHP, to crash.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2017-9047"
    },
    {
      "cve": "CVE-2017-9048",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libxml2 20904-GITv2.9.4-16-g0741801 is vulnerable to a stack-based buffer overflow. The function xmlSnprintfElementContent in valid.c is supposed to recursively dump the element content definition into a char buffer \u0027buf\u0027 of size \u0027size\u0027. At the end of the routine, the function may strcat two more characters without checking whether the current strlen(buf) + 2 \u003c size. This vulnerability causes programs that use libxml2, such as PHP, to crash.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2017-9048"
    },
    {
      "cve": "CVE-2017-9049",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libxml2 20904-GITv2.9.4-16-g0741801 is vulnerable to a heap-based buffer over-read in the xmlDictComputeFastKey function in dict.c. This vulnerability causes programs that use libxml2, such as PHP, to crash. This vulnerability exists because of an incomplete fix for libxml2 Bug 759398.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2017-9049"
    },
    {
      "cve": "CVE-2017-9050",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libxml2 20904-GITv2.9.4-16-g0741801 is vulnerable to a heap-based buffer over-read in the xmlDictAddString function in dict.c. This vulnerability causes programs that use libxml2, such as PHP, to crash. This vulnerability exists because of an incomplete fix for CVE-2016-1839.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2017-9050"
    },
    {
      "cve": "CVE-2017-16931",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "parser.c in libxml2 before 2.9.5 mishandles parameter-entity references because the NEXTL macro calls the xmlParserHandlePEReference function in the case of a \u0027%\u0027 character in a DTD name.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2017-16931"
    },
    {
      "cve": "CVE-2017-16932",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "parser.c in libxml2 before 2.9.5 does not prevent infinite recursion in parameter entities.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2017-16932"
    },
    {
      "cve": "CVE-2017-17512",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "sensible-browser in sensible-utils before 0.0.11 does not validate strings before launching the program specified by the BROWSER environment variable, which allows remote attackers to conduct argument-injection attacks via a crafted URL, as demonstrated by a --proxy-pac-file argument.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2017-17512"
    },
    {
      "cve": "CVE-2017-18258",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The xz_head function in xzlib.c in libxml2 before 2.9.6 allows remote attackers to cause a denial of service (memory consumption) via a crafted LZMA file, because the decoder functionality does not restrict memory usage to what is required for a legitimate file.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2017-18258"
    },
    {
      "cve": "CVE-2018-0495",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Libgcrypt before 1.7.10 and 1.8.x before 1.8.3 allows a memory-cache side-channel attack on ECDSA signatures that can be mitigated through the use of blinding during the signing process in the _gcry_ecc_ecdsa_sign function in cipher/ecc-ecdsa.c, aka the Return Of the Hidden Number Problem or ROHNP. To discover an ECDSA key, the attacker needs access to either the local machine or a different virtual machine on the same physical host.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2018-0495"
    },
    {
      "cve": "CVE-2018-12886",
      "cwe": {
        "id": "CWE-209",
        "name": "Generation of Error Message Containing Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "stack_protect_prologue in cfgexpand.c and stack_protect_epilogue in function.c in GNU Compiler Collection (GCC) 4.1 through 8 (under certain circumstances) generate instruction sequences when targeting ARM targets that spill the address of the stack protector guard, which allows an attacker to bypass the protection of -fstack-protector, -fstack-protector-all, -fstack-protector-strong, and -fstack-protector-explicit against stack overflow by controlling what the stack canary is compared against.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2018-12886"
    },
    {
      "cve": "CVE-2018-14404",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer dereference vulnerability exists in the xpath.c:xmlXPathCompOpEval() function of libxml2 through 2.9.8 when parsing an invalid XPath expression in the XPATH_OP_AND or XPATH_OP_OR case. Applications processing untrusted XSL format inputs with the use of the libxml2 library may be vulnerable to a denial of service attack due to a crash of the application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2018-14404"
    },
    {
      "cve": "CVE-2018-14567",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libxml2 2.9.8, if --with-lzma is used, allows remote attackers to cause a denial of service (infinite loop) via a crafted XML file that triggers LZMA_MEMLIMIT_ERROR, as demonstrated by xmllint, a different vulnerability than CVE-2015-8035 and CVE-2018-9251.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2018-14567"
    },
    {
      "cve": "CVE-2018-18928",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "International Components for Unicode (ICU) for C/C++ 63.1 has an integer overflow in number::impl::DecimalQuantity::toScientificString() in i18n/number_decimalquantity.cpp.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2018-18928"
    },
    {
      "cve": "CVE-2018-19591",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the GNU C Library (aka glibc or libc6) through 2.28, attempting to resolve a crafted hostname via getaddrinfo() leads to the allocation of a socket descriptor that is not closed. This is related to the if_nametoindex() function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2018-19591"
    },
    {
      "cve": "CVE-2018-20482",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU Tar through 1.30, when --sparse is used, mishandles file shrinkage during read access, which allows local users to cause a denial of service (infinite read loop in sparse_dump_region in sparse.c) by modifying a file that is supposed to be archived by a different user\u0027s process (e.g., a system backup running as root).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2018-20482"
    },
    {
      "cve": "CVE-2018-20843",
      "cwe": {
        "id": "CWE-611",
        "name": "Improper Restriction of XML External Entity Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libexpat in Expat before 2.2.7, XML input including XML names that contain a large number of colons could make the XML parser consume a high amount of RAM and CPU resources while processing (enough to be usable for denial-of-service attacks).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2018-20843"
    },
    {
      "cve": "CVE-2018-25032",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "zlib before 1.2.12 allows memory corruption when deflating (i.e., when compressing) if the input has many distant matches.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2018-25032"
    },
    {
      "cve": "CVE-2019-3855",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer overflow flaw which could lead to an out of bounds write was discovered in libssh2 before 1.8.1 in the way packets are read from the server. A remote attacker who compromises a SSH server may be able to execute code on the client system when a user connects to the server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-3855"
    },
    {
      "cve": "CVE-2019-3856",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer overflow flaw, which could lead to an out of bounds write, was discovered in libssh2 before 1.8.1 in the way keyboard prompt requests are parsed. A remote attacker who compromises a SSH server may be able to execute code on the client system when a user connects to the server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-3856"
    },
    {
      "cve": "CVE-2019-3857",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer overflow flaw which could lead to an out of bounds write was discovered in libssh2 before 1.8.1 in the way SSH_MSG_CHANNEL_REQUEST packets with an exit signal are parsed. A remote attacker who compromises a SSH server may be able to execute code on the client system when a user connects to the server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-3857"
    },
    {
      "cve": "CVE-2019-3858",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out of bounds read flaw was discovered in libssh2 before 1.8.1 when a specially crafted SFTP packet is received from the server. A remote attacker who compromises a SSH server may be able to cause a Denial of Service or read data in the client memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-3858"
    },
    {
      "cve": "CVE-2019-3859",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out of bounds read flaw was discovered in libssh2 before 1.8.1 in the _libssh2_packet_require and _libssh2_packet_requirev functions. A remote attacker who compromises a SSH server may be able to cause a Denial of Service or read data in the client memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-3859"
    },
    {
      "cve": "CVE-2019-3860",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out of bounds read flaw was discovered in libssh2 before 1.8.1 in the way SFTP packets with empty payloads are parsed. A remote attacker who compromises a SSH server may be able to cause a Denial of Service or read data in the client memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-3860"
    },
    {
      "cve": "CVE-2019-3861",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out of bounds read flaw was discovered in libssh2 before 1.8.1 in the way SSH packets with a padding length value greater than the packet length are parsed. A remote attacker who compromises a SSH server may be able to cause a Denial of Service or read data in the client memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-3861"
    },
    {
      "cve": "CVE-2019-3862",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out of bounds read flaw was discovered in libssh2 before 1.8.1 in the way SSH_MSG_CHANNEL_REQUEST packets with an exit status message and no payload are parsed. A remote attacker who compromises a SSH server may be able to cause a Denial of Service or read data in the client memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-3862"
    },
    {
      "cve": "CVE-2019-3863",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in libssh2 before 1.8.1. A server could send a multiple keyboard interactive response messages whose total length are greater than unsigned char max characters. This value is used as an index to copy memory causing in an out of bounds memory write error.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-3863"
    },
    {
      "cve": "CVE-2019-5018",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An exploitable use after free vulnerability exists in the window function functionality of Sqlite3 3.26.0. A specially crafted SQL command can cause a use after free vulnerability, potentially resulting in remote code execution. An attacker can send a malicious SQL command to trigger this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-5018"
    },
    {
      "cve": "CVE-2019-5094",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An exploitable code execution vulnerability exists in the quota file functionality of E2fsprogs 1.45.3. A specially crafted ext4 partition can cause an out-of-bounds write on the heap, resulting in code execution. An attacker can corrupt a partition to trigger this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-5094"
    },
    {
      "cve": "CVE-2019-5188",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A code execution vulnerability exists in the directory rehashing functionality of E2fsprogs e2fsck 1.45.4. A specially crafted ext4 directory can cause an out-of-bounds write on the stack, resulting in code execution. An attacker can corrupt a partition to trigger this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-5188"
    },
    {
      "cve": "CVE-2019-5435",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer overflow in curl\u0027s URL API results in a buffer overflow in libcurl 7.62.0 to and including 7.64.1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-5435"
    },
    {
      "cve": "CVE-2019-5436",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A heap buffer overflow in the TFTP receiving code allows for DoS or arbitrary code execution in libcurl versions 7.19.4 through 7.64.1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-5436"
    },
    {
      "cve": "CVE-2019-5443",
      "cwe": {
        "id": "CWE-427",
        "name": "Uncontrolled Search Path Element"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A non-privileged user or program can put code and a config file in a known non-privileged path (under C:/usr/local/) that will make curl \u003c= 7.65.1 automatically run the code (as an openssl \"engine\") on invocation. If that curl is invoked by a privileged user it can do anything it wants.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-5443"
    },
    {
      "cve": "CVE-2019-5481",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Double-free vulnerability in the FTP-kerberos code in cURL 7.52.0 to 7.65.3.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-5481"
    },
    {
      "cve": "CVE-2019-5482",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Heap buffer overflow in the TFTP protocol handler in cURL 7.19.4 to 7.65.3.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-5482"
    },
    {
      "cve": "CVE-2019-6109",
      "cwe": {
        "id": "CWE-116",
        "name": "Improper Encoding or Escaping of Output"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in OpenSSH 7.9. Due to missing character encoding in the progress display, a malicious server (or Man-in-The-Middle attacker) can employ crafted object names to manipulate the client output, e.g., by using ANSI control codes to hide additional files being transferred. This affects refresh_progress_meter() in progressmeter.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.8,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-6109"
    },
    {
      "cve": "CVE-2019-6110",
      "cwe": {
        "id": "CWE-838",
        "name": "Inappropriate Encoding for Output Context"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In OpenSSH 7.9, due to accepting and displaying arbitrary stderr output from the server, a malicious server (or Man-in-The-Middle attacker) can manipulate the client output, for example to use ANSI control codes to hide additional files being transferred.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.8,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-6110"
    },
    {
      "cve": "CVE-2019-6111",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in OpenSSH 7.9. Due to the scp implementation being derived from 1983 rcp, the server chooses which files/directories are sent to the client. However, the scp client only performs cursory validation of the object name returned (only directory traversal attacks are prevented). A malicious scp server (or Man-in-The-Middle attacker) can overwrite arbitrary files in the scp client target directory. If recursive operation (-r) is performed, the server can manipulate subdirectories as well (for example, to overwrite the .ssh/authorized_keys file).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-6111"
    },
    {
      "cve": "CVE-2019-6488",
      "cwe": {
        "id": "CWE-404",
        "name": "Improper Resource Shutdown or Release"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The string component in the GNU C Library (aka glibc or libc6) through 2.28, when running on the x32 architecture, incorrectly attempts to use a 64-bit register for size_t in assembly codes, which can lead to a segmentation fault or possibly unspecified other impact, as demonstrated by a crash in __memmove_avx_unaligned_erms in sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S during a memcpy.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-6488"
    },
    {
      "cve": "CVE-2019-7309",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the GNU C Library (aka glibc or libc6) through 2.29, the memcmp function for the x32 architecture can incorrectly return zero (indicating that the inputs are equal) because the RDX most significant bit is mishandled.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-7309"
    },
    {
      "cve": "CVE-2019-8457",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite3 from 3.6.0 to and including 3.27.2 is vulnerable to heap out-of-bound read in the rtreenode() function when handling invalid rtree tables.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-8457"
    },
    {
      "cve": "CVE-2019-9169",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the GNU C Library (aka glibc or libc6) through 2.29, proceed_next_node in posix/regexec.c has a heap-based buffer over-read via an attempted case-insensitive regular-expression match.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-9169"
    },
    {
      "cve": "CVE-2019-9636",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Python 2.7.x through 2.7.16 and 3.x through 3.7.2 is affected by: Improper Handling of Unicode Encoding (with an incorrect netloc) during NFKC normalization. The impact is: Information disclosure (credentials, cookies, etc. that are cached against a given hostname). The components are: urllib.parse.urlsplit, urllib.parse.urlparse. The attack vector is: A specially crafted URL could be incorrectly parsed to locate cookies or authentication data and send that information to a different host than when parsed correctly. This is fixed in: v2.7.17, v2.7.17rc1, v2.7.18, v2.7.18rc1; v3.5.10, v3.5.10rc1, v3.5.7, v3.5.8, v3.5.8rc1, v3.5.8rc2, v3.5.9; v3.6.10, v3.6.10rc1, v3.6.11, v3.6.11rc1, v3.6.12, v3.6.9, v3.6.9rc1; v3.7.3, v3.7.3rc1, v3.7.4, v3.7.4rc1, v3.7.4rc2, v3.7.5, v3.7.5rc1, v3.7.6, v3.7.6rc1, v3.7.7, v3.7.7rc1, v3.7.8, v3.7.8rc1, v3.7.9.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-9636"
    },
    {
      "cve": "CVE-2019-9674",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Lib/zipfile.py in Python through 3.7.2 allows remote attackers to cause a denial of service (resource consumption) via a ZIP bomb.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-9674"
    },
    {
      "cve": "CVE-2019-9740",
      "cwe": {
        "id": "CWE-93",
        "name": "Improper Neutralization of CRLF Sequences (\u0027CRLF Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in urllib2 in Python 2.x through 2.7.16 and urllib in Python 3.x through 3.7.3. CRLF injection is possible if the attacker controls a url parameter, as demonstrated by the first argument to urllib.request.urlopen with \\r\\n (specifically in the query string after a ? character) followed by an HTTP header or a Redis command. This is fixed in: v2.7.17, v2.7.17rc1, v2.7.18, v2.7.18rc1; v3.5.10, v3.5.10rc1, v3.5.8, v3.5.8rc1, v3.5.8rc2, v3.5.9; v3.6.10, v3.6.10rc1, v3.6.11, v3.6.11rc1, v3.6.12, v3.6.9, v3.6.9rc1; v3.7.4, v3.7.4rc1, v3.7.4rc2, v3.7.5, v3.7.5rc1, v3.7.6, v3.7.6rc1, v3.7.7, v3.7.7rc1, v3.7.8, v3.7.8rc1, v3.7.9.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-9740"
    },
    {
      "cve": "CVE-2019-9923",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "pax_decode_header in sparse.c in GNU Tar before 1.32 had a NULL pointer dereference when parsing certain archives that have malformed extended headers.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-9923"
    },
    {
      "cve": "CVE-2019-9936",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite 3.27.2, running fts5 prefix queries inside a transaction could trigger a heap-based buffer over-read in fts5HashEntrySort in sqlite3.c, which may lead to an information leak. This is related to ext/fts5/fts5_hash.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-9936"
    },
    {
      "cve": "CVE-2019-9937",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite 3.27.2, interleaving reads and writes in a single transaction with an fts5 virtual table will lead to a NULL Pointer Dereference in fts5ChunkIterate in sqlite3.c. This is related to ext/fts5/fts5_hash.c and ext/fts5/fts5_index.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-9937"
    },
    {
      "cve": "CVE-2019-9947",
      "cwe": {
        "id": "CWE-93",
        "name": "Improper Neutralization of CRLF Sequences (\u0027CRLF Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in urllib2 in Python 2.x through 2.7.16 and urllib in Python 3.x through 3.7.3. CRLF injection is possible if the attacker controls a url parameter, as demonstrated by the first argument to urllib.request.urlopen with \\r\\n (specifically in the path component of a URL that lacks a ? character) followed by an HTTP header or a Redis command. This is similar to the CVE-2019-9740 query string issue. This is fixed in: v2.7.17, v2.7.17rc1, v2.7.18, v2.7.18rc1; v3.5.10, v3.5.10rc1, v3.5.8, v3.5.8rc1, v3.5.8rc2, v3.5.9; v3.6.10, v3.6.10rc1, v3.6.11, v3.6.11rc1, v3.6.12, v3.6.9, v3.6.9rc1; v3.7.4, v3.7.4rc1, v3.7.4rc2, v3.7.5, v3.7.5rc1, v3.7.6, v3.7.6rc1, v3.7.7, v3.7.7rc1, v3.7.8, v3.7.8rc1, v3.7.9.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-9947"
    },
    {
      "cve": "CVE-2019-9948",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "urllib in Python 2.x through 2.7.16 supports the local_file: scheme, which makes it easier for remote attackers to bypass protection mechanisms that blacklist file: URIs, as demonstrated by triggering a urllib.urlopen(\u0027local_file:///etc/passwd\u0027) call.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-9948"
    },
    {
      "cve": "CVE-2019-10160",
      "cwe": {
        "id": "CWE-172",
        "name": "Encoding Error"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A security regression of CVE-2019-9636 was discovered in python since commit d537ab0ff9767ef024f26246899728f0116b1ec3 affecting versions 2.7, 3.5, 3.6, 3.7 and from v3.8.0a4 through v3.8.0b1, which still allows an attacker to exploit CVE-2019-9636 by abusing the user and password parts of a URL. When an application parses user-supplied URLs to store cookies, authentication credentials, or other kind of information, it is possible for an attacker to provide specially crafted URLs to make the application locate host-related information (e.g. cookies, authentication data) and send them to a different host than where it should, unlike if the URLs had been correctly parsed. The result of an attack may vary based on the application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-10160"
    },
    {
      "cve": "CVE-2019-11360",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A buffer overflow in iptables-restore in netfilter iptables 1.8.2 allows an attacker to (at least) crash the program or potentially gain code execution via a specially crafted iptables-save file. This is related to add_param_to_argv in xshared.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.2,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-11360"
    },
    {
      "cve": "CVE-2019-12290",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU libidn2 before 2.2.0 fails to perform the roundtrip checks specified in RFC3490 Section 4.2 when converting A-labels to U-labels. This makes it possible in some circumstances for one domain to impersonate another. By creating a malicious domain that matches a target domain except for the inclusion of certain punycoded Unicode characters (that would be discarded when converted first to a Unicode label and then back to an ASCII label), arbitrary domains can be impersonated.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-12290"
    },
    {
      "cve": "CVE-2019-12900",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "BZ2_decompress in decompress.c in bzip2 through 1.0.6 has an out-of-bounds write when there are many selectors.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-12900"
    },
    {
      "cve": "CVE-2019-12904",
      "cwe": {
        "id": "CWE-668",
        "name": "Exposure of Resource to Wrong Sphere"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Libgcrypt 1.8.4, the C implementation of AES is vulnerable to a flush-and-reload side-channel attack because physical addresses are available to other processes. (The C implementation is used on platforms where an assembly-language implementation is unavailable.) NOTE: the vendor\u0027s position is that the issue report cannot be validated because there is no description of an attack",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-12904"
    },
    {
      "cve": "CVE-2019-13057",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the server in OpenLDAP before 2.4.48. When the server administrator delegates rootDN (database admin) privileges for certain databases but wants to maintain isolation (e.g., for multi-tenant deployments), slapd does not properly stop a rootDN from requesting authorization as an identity from another database during a SASL bind or with a proxyAuthz (RFC 4370) control. (It is not a common configuration to deploy a system where the server administrator and a DB administrator enjoy different levels of trust.)",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-13057"
    },
    {
      "cve": "CVE-2019-13565",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in OpenLDAP 2.x before 2.4.48. When using SASL authentication and session encryption, and relying on the SASL security layers in slapd access controls, it is possible to obtain access that would otherwise be denied via a simple bind for any identity covered in those ACLs. After the first SASL bind is completed, the sasl_ssf value is retained for all new non-SASL connections. Depending on the ACL configuration, this can affect different types of operations (searches, modifications, etc.). In other words, a successful authorization step completed by one user affects the authorization requirement for a different user.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-13565"
    },
    {
      "cve": "CVE-2019-13627",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "It was discovered that there was a ECDSA timing attack in the libgcrypt20 cryptographic library. Version affected: 1.8.4-5, 1.7.6-2+deb9u3, and 1.6.3-2+deb8u4. Versions fixed: 1.8.5-2 and 1.6.3-2+deb8u7.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:N/UI:R/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-13627"
    },
    {
      "cve": "CVE-2019-15847",
      "cwe": {
        "id": "CWE-331",
        "name": "Insufficient Entropy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The POWER9 backend in GNU Compiler Collection (GCC) before version 10 could optimize multiple calls of the __builtin_darn intrinsic into a single call, thus reducing the entropy of the random number generator. This occurred because a volatile operation was not specified. For example, within a single execution of a program, the output of every __builtin_darn() call may be the same.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-15847"
    },
    {
      "cve": "CVE-2019-15903",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libexpat before 2.2.8, crafted XML input could fool the parser into changing from DTD parsing to document parsing too early; a consecutive call to XML_GetCurrentLineNumber (or XML_GetCurrentColumnNumber) then resulted in a heap-based buffer over-read.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-15903"
    },
    {
      "cve": "CVE-2019-16056",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in Python through 2.7.16, 3.x through 3.5.7, 3.6.x through 3.6.9, and 3.7.x through 3.7.4. The email module wrongly parses email addresses that contain multiple @ characters. An application that uses the email module and implements some kind of checks on the From/To headers of a message could be tricked into accepting an email address that should be denied. An attack may be the same as in CVE-2019-11340; however, this CVE applies to Python more generally.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-16056"
    },
    {
      "cve": "CVE-2019-16168",
      "cwe": {
        "id": "CWE-369",
        "name": "Divide By Zero"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite through 3.29.0, whereLoopAddBtreeIndex in sqlite3.c can crash a browser or other application because of missing validation of a sqlite_stat1 sz field, aka a \"severe division by zero in the query planner.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-16168"
    },
    {
      "cve": "CVE-2019-16905",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "OpenSSH 7.7 through 7.9 and 8.x before 8.1, when compiled with an experimental key type, has a pre-authentication integer overflow if a client or server is configured to use a crafted XMSS key. This leads to memory corruption and local code execution because of an error in the XMSS key parsing algorithm. NOTE: the XMSS implementation is considered experimental in all released OpenSSH versions, and there is no supported way to enable it when building portable OpenSSH.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-16905"
    },
    {
      "cve": "CVE-2019-17498",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libssh2 v1.9.0 and earlier versions, the SSH_MSG_DISCONNECT logic in packet.c has an integer overflow in a bounds check, enabling an attacker to specify an arbitrary (out-of-bounds) offset for a subsequent memory read. A crafted SSH server may be able to disclose sensitive information or cause a denial of service condition on the client system when a user connects to the server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-17498"
    },
    {
      "cve": "CVE-2019-17543",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "LZ4 before 1.9.2 has a heap-based buffer overflow in LZ4_write32 (related to LZ4_compress_destSize), affecting applications that call LZ4_compress_fast with a large input. (This issue can also lead to data corruption.) NOTE: the vendor states \"only a few specific / uncommon usages of the API are at risk.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-17543"
    },
    {
      "cve": "CVE-2019-17594",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a heap-based buffer over-read in the _nc_find_entry function in tinfo/comp_hash.c in the terminfo library in ncurses before 6.1-20191012.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-17594"
    },
    {
      "cve": "CVE-2019-17595",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a heap-based buffer over-read in the fmt_entry function in tinfo/comp_hash.c in the terminfo library in ncurses before 6.1-20191012.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:L/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-17595"
    },
    {
      "cve": "CVE-2019-18224",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "idn2_to_ascii_4i in lib/lookup.c in GNU libidn2 before 2.1.1 has a heap-based buffer overflow via a long domain string.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-18224"
    },
    {
      "cve": "CVE-2019-18276",
      "cwe": {
        "id": "CWE-273",
        "name": "Improper Check for Dropped Privileges"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in disable_priv_mode in shell.c in GNU Bash through 5.0 patch 11. By default, if Bash is run with its effective UID not equal to its real UID, it will drop privileges by setting its effective UID to its real UID. However, it does so incorrectly. On Linux and other systems that support \"saved UID\" functionality, the saved UID is not dropped. An attacker with command execution in the shell can use \"enable -f\" for runtime loading of a new builtin, which can be a shared object that calls setuid() and therefore regains privileges. However, binaries running with an effective UID of 0 are unaffected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-18276"
    },
    {
      "cve": "CVE-2019-18348",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in urllib2 in Python 2.x through 2.7.17 and urllib in Python 3.x through 3.8.0. CRLF injection is possible if the attacker controls a url parameter, as demonstrated by the first argument to urllib.request.urlopen with \\r\\n (specifically in the host component of a URL) followed by an HTTP header. This is similar to the CVE-2019-9740 query string issue and the CVE-2019-9947 path string issue. (This is not exploitable when glibc has CVE-2016-10739 fixed.). This is fixed in: v2.7.18, v2.7.18rc1; v3.5.10, v3.5.10rc1; v3.6.11, v3.6.11rc1, v3.6.12; v3.7.8, v3.7.8rc1, v3.7.9; v3.8.3, v3.8.3rc1, v3.8.4, v3.8.4rc1, v3.8.5, v3.8.6, v3.8.6rc1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-18348"
    },
    {
      "cve": "CVE-2019-19126",
      "cwe": {
        "id": "CWE-665",
        "name": "Improper Initialization"
      },
      "notes": [
        {
          "category": "summary",
          "text": "On the x86-64 architecture, the GNU C Library (aka glibc) before 2.31 fails to ignore the LD_PREFER_MAP_32BIT_EXEC environment variable during program execution after a security transition, allowing local attackers to restrict the possible mapping addresses for loaded libraries and thus bypass ASLR for a setuid program.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19126"
    },
    {
      "cve": "CVE-2019-19242",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite 3.30.1 mishandles pExpr-\u003ey.pTab, as demonstrated by the TK_COLUMN case in sqlite3ExprCodeTarget in expr.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19242"
    },
    {
      "cve": "CVE-2019-19244",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Select in select.c in SQLite 3.30.1 allows a crash if a sub-select uses both DISTINCT and window functions, and also has certain ORDER BY usage.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19244"
    },
    {
      "cve": "CVE-2019-19317",
      "cwe": {
        "id": "CWE-681",
        "name": "Incorrect Conversion between Numeric Types"
      },
      "notes": [
        {
          "category": "summary",
          "text": "lookupName in resolve.c in SQLite 3.30.1 omits bits from the colUsed bitmask in the case of a generated column, which allows attackers to cause a denial of service or possibly have unspecified other impact.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19317"
    },
    {
      "cve": "CVE-2019-19603",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite 3.30.1 mishandles certain SELECT statements with a nonexistent VIEW, leading to an application crash.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19603"
    },
    {
      "cve": "CVE-2019-19645",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "alter.c in SQLite through 3.30.1 allows attackers to trigger infinite recursion via certain types of self-referential views in conjunction with ALTER TABLE statements.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19645"
    },
    {
      "cve": "CVE-2019-19646",
      "cwe": {
        "id": "CWE-754",
        "name": "Improper Check for Unusual or Exceptional Conditions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "pragma.c in SQLite through 3.30.1 mishandles NOT NULL in an integrity_check PRAGMA command in certain cases of generated columns.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19646"
    },
    {
      "cve": "CVE-2019-19880",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "exprListAppendList in window.c in SQLite 3.30.1 allows attackers to trigger an invalid pointer dereference because constant integer values in ORDER BY clauses of window definitions are mishandled.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19880"
    },
    {
      "cve": "CVE-2019-19906",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "cyrus-sasl (aka Cyrus SASL) 2.1.27 has an out-of-bounds write leading to unauthenticated remote denial-of-service in OpenLDAP via a malformed LDAP packet. The OpenLDAP crash is ultimately caused by an off-by-one error in _sasl_add_string in common.c in cyrus-sasl.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19906"
    },
    {
      "cve": "CVE-2019-19923",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "flattenSubquery in select.c in SQLite 3.30.1 mishandles certain uses of SELECT DISTINCT involving a LEFT JOIN in which the right-hand side is a view. This can cause a NULL pointer dereference (or incorrect results).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19923"
    },
    {
      "cve": "CVE-2019-19924",
      "cwe": {
        "id": "CWE-755",
        "name": "Improper Handling of Exceptional Conditions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite 3.30.1 mishandles certain parser-tree rewriting, related to expr.c, vdbeaux.c, and window.c. This is caused by incorrect sqlite3WindowRewrite() error handling.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19924"
    },
    {
      "cve": "CVE-2019-19925",
      "cwe": {
        "id": "CWE-434",
        "name": "Unrestricted Upload of File with Dangerous Type"
      },
      "notes": [
        {
          "category": "summary",
          "text": "zipfileUpdate in ext/misc/zipfile.c in SQLite 3.30.1 mishandles a NULL pathname during an update of a ZIP archive.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19925"
    },
    {
      "cve": "CVE-2019-19926",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "multiSelect in select.c in SQLite 3.30.1 mishandles certain errors during parsing, as demonstrated by errors from sqlite3WindowRewrite() calls. NOTE: this vulnerability exists because of an incomplete fix for CVE-2019-19880.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19926"
    },
    {
      "cve": "CVE-2019-19956",
      "cwe": {
        "id": "CWE-772",
        "name": "Missing Release of Resource after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "xmlParseBalancedChunkMemoryRecover in parser.c in libxml2 before 2.9.10 has a memory leak related to newDoc-\u003eoldNs.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19956"
    },
    {
      "cve": "CVE-2019-19959",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ext/misc/zipfile.c in SQLite 3.30.1 mishandles certain uses of INSERT INTO in situations involving embedded \u0027\\0\u0027 characters in filenames, leading to a memory-management error that can be detected by (for example) valgrind.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19959"
    },
    {
      "cve": "CVE-2019-20218",
      "cwe": {
        "id": "CWE-755",
        "name": "Improper Handling of Exceptional Conditions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "selectExpander in select.c in SQLite 3.30.1 proceeds with WITH stack unwinding even after a parsing error.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-20218"
    },
    {
      "cve": "CVE-2019-20367",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nlist.c in libbsd before 0.10.0 has an out-of-bounds read during a comparison for a symbol name from the string table (strtab).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-20367"
    },
    {
      "cve": "CVE-2019-20388",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "xmlSchemaPreRun in xmlschemas.c in libxml2 2.9.10 allows an xmlSchemaValidateStream memory leak.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-20388"
    },
    {
      "cve": "CVE-2019-20795",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "iproute2 before 5.1.0 has a use-after-free in get_netnsid_from_name in ip/ipnetns.c. NOTE: security relevance may be limited to certain uses of setuid that, although not a default, are sometimes a configuration option offered to end users. Even when setuid is used, other factors (such as C library configuration) may block exploitability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-20795"
    },
    {
      "cve": "CVE-2019-20907",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Lib/tarfile.py in Python through 3.8.3, an attacker is able to craft a TAR archive leading to an infinite loop when opened by tarfile.open, because _proc_pax lacks header validation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-20907"
    },
    {
      "cve": "CVE-2019-25013",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The iconv feature in the GNU C Library (aka glibc or libc6) through 2.32, when processing invalid multi-byte input sequences in the EUC-KR encoding, may have a buffer over-read.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-25013"
    },
    {
      "cve": "CVE-2019-1010022",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "** DISPUTED ** GNU Libc current is affected by: Mitigation bypass. The impact is: Attacker may bypass stack guard protection. The component is: nptl. The attack vector is: Exploit stack buffer overflow vulnerability and use this bypass vulnerability to bypass stack guard. NOTE: Upstream comments indicate \"this is being treated as a non-security bug and no real threat.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-1010022"
    },
    {
      "cve": "CVE-2019-1010023",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "** DISPUTED ** GNU Libc current is affected by: Re-mapping current loaded library with malicious ELF file. The impact is: In worst case attacker may evaluate privileges. The component is: libld. The attack vector is: Attacker sends 2 ELF files to victim and asks to run ldd on it. ldd execute code. NOTE: Upstream comments indicate \"this is being treated as a non-security bug and no real threat.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-1010023"
    },
    {
      "cve": "CVE-2019-1010024",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "** DISPUTED ** GNU Libc current is affected by: Mitigation bypass. The impact is: Attacker may bypass ASLR using cache of thread stack and heap. The component is: glibc. NOTE: Upstream comments indicate \"this is being treated as a non-security bug and no real threat.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-1010024"
    },
    {
      "cve": "CVE-2019-1010025",
      "cwe": {
        "id": "CWE-330",
        "name": "Use of Insufficiently Random Values"
      },
      "notes": [
        {
          "category": "summary",
          "text": "** DISPUTED ** GNU Libc current is affected by: Mitigation bypass. The impact is: Attacker may guess the heap addresses of pthread_created thread. The component is: glibc. NOTE: the vendor\u0027s position is \"ASLR bypass itself is not a vulnerability.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-1010025"
    },
    {
      "cve": "CVE-2019-1010180",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU gdb All versions is affected by: Buffer Overflow - Out of bound memory access. The impact is: Deny of Service, Memory Disclosure, and Possible Code Execution. The component is: The main gdb module. The attack vector is: Open an ELF for debugging. The fixed version is: Not fixed yet.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-1010180"
    },
    {
      "cve": "CVE-2020-1712",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A heap use-after-free vulnerability was found in systemd before version v245-rc1, where asynchronous Polkit queries are performed while handling dbus messages. A local unprivileged attacker can abuse this flaw to crash systemd services or potentially execute code and elevate their privileges, by sending specially crafted dbus messages.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-1712"
    },
    {
      "cve": "CVE-2020-1751",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds write vulnerability was found in glibc before 2.31 when handling signal trampolines on PowerPC. Specifically, the backtrace function did not properly check the array bounds when storing the frame address, resulting in a denial of service or potential code execution. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-1751"
    },
    {
      "cve": "CVE-2020-1752",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability introduced in glibc upstream version 2.14 was found in the way the tilde expansion was carried out. Directory paths containing an initial tilde followed by a valid username were affected by this issue. A local attacker could exploit this flaw by creating a specially crafted path that, when processed by the glob function, would potentially lead to arbitrary code execution. This was fixed in version 2.32.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-1752"
    },
    {
      "cve": "CVE-2020-6096",
      "cwe": {
        "id": "CWE-195",
        "name": "Signed to Unsigned Conversion Error"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An exploitable signed comparison vulnerability exists in the ARMv7 memcpy() implementation of GNU glibc 2.30.9000. Calling memcpy() (on ARMv7 targets that utilize the GNU glibc implementation) with a negative value for the \u0027num\u0027 parameter results in a signed comparison vulnerability. If an attacker underflows the \u0027num\u0027 parameter to memcpy(), this vulnerability could lead to undefined behavior such as writing to out-of-bounds memory and potentially remote code execution. Furthermore, this memcpy() implementation allows for program execution to continue in scenarios where a segmentation fault or crash should have occurred. The dangers occur in that subsequent execution and iterations of this code will be executed with this corrupted data.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-6096"
    },
    {
      "cve": "CVE-2020-7595",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "xmlStringLenDecodeEntities in parser.c in libxml2 2.9.10 has an infinite loop in a certain end-of-file situation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-7595"
    },
    {
      "cve": "CVE-2020-8169",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The libcurl library versions 7.62.0 to and including  7.70.0 are vulnerable to an information disclosure vulnerability that can lead to a partial password being leaked over the network and to the DNS server(s).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-8169"
    },
    {
      "cve": "CVE-2020-8177",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl 7.20.0 through 7.70.0 is vulnerable to improper restriction of names for files and other resources that can lead too overwriting a local file when the -J flag is used.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-8177"
    },
    {
      "cve": "CVE-2020-8231",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Due to use of a dangling pointer, libcurl 7.29.0 through 7.71.1 can use the wrong connection when sending data.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-8231"
    },
    {
      "cve": "CVE-2020-8284",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A malicious server can use the FTP PASV response to trick curl 7.73.0 and earlier into connecting back to a given IP address and port, and this way potentially make curl extract information about services that are otherwise private and not disclosed, for example doing port scanning and service banner extractions.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-8284"
    },
    {
      "cve": "CVE-2020-8285",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl 7.21.0 to and including 7.73.0 is vulnerable to uncontrolled recursion due to a stack overflow issue in FTP wildcard match parsing.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-8285"
    },
    {
      "cve": "CVE-2020-8286",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The libcurl library versions 7.41.0 to and including  7.73.0 are vulnerable to an improper check for certificate revocation due to insufficient verification of the OCSP response. This vulnerability could allow an attacker to pass a revoked certificate as valid.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-8286"
    },
    {
      "cve": "CVE-2020-8315",
      "cwe": {
        "id": "CWE-427",
        "name": "Uncontrolled Search Path Element"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Python (CPython) 3.6 through 3.6.10, 3.7 through 3.7.6, and 3.8 through 3.8.1, an insecure dependency load upon launch on Windows 7 may result in an attacker\u0027s copy of api-ms-win-core-path-l1-1-0.dll being loaded and used instead of the system\u0027s copy. Windows 8 and later are unaffected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-8315"
    },
    {
      "cve": "CVE-2020-8492",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Python 2.7 through 2.7.17, 3.5 through 3.5.9, 3.6 through 3.6.10, 3.7 through 3.7.6, and 3.8 through 3.8.1 allows an HTTP server to conduct Regular Expression Denial of Service (ReDoS) attacks against a client because of urllib.request.AbstractBasicAuthHandler catastrophic backtracking.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-8492"
    },
    {
      "cve": "CVE-2020-9327",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite 3.31.1, isAuxiliaryVtabOperator allows attackers to trigger a NULL pointer dereference and segmentation fault because of generated column optimizations.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-9327"
    },
    {
      "cve": "CVE-2020-10029",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The GNU C Library (aka glibc or libc6) before 2.32 could overflow an on-stack buffer during range reduction if an input to an 80-bit long double function contains a non-canonical bit pattern, a seen when passing a 0x5d414141414141410000 value to sinl on x86 targets. This is related to sysdeps/ieee754/ldbl-96/e_rem_pio2l.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-10029"
    },
    {
      "cve": "CVE-2020-10531",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in International Components for Unicode (ICU) for C/C++ through 66.1. An integer overflow, leading to a heap-based buffer overflow, exists in the UnicodeString::doAppend() function in common/unistr.cpp.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-10531"
    },
    {
      "cve": "CVE-2020-10543",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Perl before 5.30.3 on 32-bit platforms allows a heap-based buffer overflow because nested regular expression quantifiers have an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.2,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-10543"
    },
    {
      "cve": "CVE-2020-10735",
      "cwe": {
        "id": "CWE-704",
        "name": "Incorrect Type Conversion or Cast"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in python. In algorithms with quadratic time complexity using non-binary bases, when using int(\"text\"), a system could take 50ms to parse an int string with 100,000 digits and 5s for 1,000,000 digits (float, decimal, int.from_bytes(), and int() for binary bases 2, 4, 8, 16, and 32 are not affected). The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-10735"
    },
    {
      "cve": "CVE-2020-10878",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Perl before 5.30.3 has an integer overflow related to mishandling of a \"PL_regkind[OP(n)] == NOTHING\" situation. A crafted regular expression could lead to malformed bytecode with a possibility of instruction injection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.6,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-10878"
    },
    {
      "cve": "CVE-2020-11501",
      "cwe": {
        "id": "CWE-330",
        "name": "Use of Insufficiently Random Values"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GnuTLS 3.6.x before 3.6.13 uses incorrect cryptography for DTLS. The earliest affected version is 3.6.3 (2018-07-16) because of an error in a 2017-10-06 commit. The DTLS client always uses 32 \u0027\\0\u0027 bytes instead of a random value, and thus contributes no randomness to a DTLS negotiation. This breaks the security guarantees of the DTLS protocol.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-11501"
    },
    {
      "cve": "CVE-2020-11655",
      "cwe": {
        "id": "CWE-665",
        "name": "Improper Initialization"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite through 3.31.1 allows attackers to cause a denial of service (segmentation fault) via a malformed window-function query because the AggInfo object\u0027s initialization is mishandled.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-11655"
    },
    {
      "cve": "CVE-2020-11656",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite through 3.31.1, the ALTER TABLE implementation has a use-after-free, as demonstrated by an ORDER BY clause that belongs to a compound SELECT statement.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-11656"
    },
    {
      "cve": "CVE-2020-12062",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The scp client in OpenSSH 8.2 incorrectly sends duplicate responses to the server upon a utimes system call failure, which allows a malicious unprivileged user on the remote server to overwrite arbitrary files in the client\u0027s download directory by creating a crafted subdirectory anywhere on the remote server. The victim must use the command scp -rp to download a file hierarchy containing, anywhere inside, this crafted subdirectory. NOTE: the vendor points out that \"this attack can achieve no more than a hostile peer is already able to achieve within the scp protocol\" and \"utimes does not fail under normal circumstances.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-12062"
    },
    {
      "cve": "CVE-2020-12243",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In filter.c in slapd in OpenLDAP before 2.4.50, LDAP search filters with nested boolean expressions can result in denial of service (daemon crash).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-12243"
    },
    {
      "cve": "CVE-2020-12723",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "regcomp.c in Perl before 5.30.3 allows a buffer overflow via a crafted regular expression because of recursive S_study_chunk calls.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-12723"
    },
    {
      "cve": "CVE-2020-12762",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "json-c through 0.14 has an integer overflow and out-of-bounds write via a large JSON file, as demonstrated by printbuf_memappend.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-12762"
    },
    {
      "cve": "CVE-2020-13434",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite through 3.32.0 has an integer overflow in sqlite3_str_vappendf in printf.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-13434"
    },
    {
      "cve": "CVE-2020-13435",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite through 3.32.0 has a segmentation fault in sqlite3ExprCodeTarget in expr.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-13435"
    },
    {
      "cve": "CVE-2020-13529",
      "cwe": {
        "id": "CWE-290",
        "name": "Authentication Bypass by Spoofing"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An exploitable denial-of-service vulnerability exists in Systemd 245. A specially crafted DHCP FORCERENEW packet can cause a server running the DHCP client to be vulnerable to a DHCP ACK spoofing attack. An attacker can forge a pair of FORCERENEW and DCHP ACK packets to reconfigure the server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:A/AC:H/PR:N/UI:N/S:C/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-13529"
    },
    {
      "cve": "CVE-2020-13630",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ext/fts3/fts3.c in SQLite before 3.32.0 has a use-after-free in fts3EvalNextRow, related to the snippet feature.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-13630"
    },
    {
      "cve": "CVE-2020-13631",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite before 3.32.0 allows a virtual table to be renamed to the name of one of its shadow tables, related to alter.c and build.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-13631"
    },
    {
      "cve": "CVE-2020-13632",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ext/fts3/fts3_snippet.c in SQLite before 3.32.0 has a NULL pointer dereference via a crafted matchinfo() query.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-13632"
    },
    {
      "cve": "CVE-2020-13776",
      "cwe": {
        "id": "CWE-269",
        "name": "Improper Privilege Management"
      },
      "notes": [
        {
          "category": "summary",
          "text": "systemd through v245 mishandles numerical usernames such as ones composed of decimal digits or 0x followed by hex digits, as demonstrated by use of root privileges when privileges of the 0x0 user account were intended. NOTE: this issue exists because of an incomplete fix for CVE-2017-1000082.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-13776"
    },
    {
      "cve": "CVE-2020-13777",
      "cwe": {
        "id": "CWE-327",
        "name": "Use of a Broken or Risky Cryptographic Algorithm"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GnuTLS 3.6.x before 3.6.14 uses incorrect cryptography for encrypting a session ticket (a loss of confidentiality in TLS 1.2, and an authentication bypass in TLS 1.3). The earliest affected version is 3.6.4 (2018-09-24) because of an error in a 2018-09-18 commit. Until the first key rotation, the TLS server always uses wrong data in place of an encryption key derived from an application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-13777"
    },
    {
      "cve": "CVE-2020-13871",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite 3.32.2 has a use-after-free in resetAccumulator in select.c because the parse tree rewrite for window functions is too late.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-13871"
    },
    {
      "cve": "CVE-2020-14145",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The client side in OpenSSH 5.7 through 8.4 has an Observable Discrepancy leading to an information leak in the algorithm negotiation. This allows man-in-the-middle attackers to target initial connection attempts (where no host key for the server has been cached by the client). NOTE: some reports state that 8.5 and 8.6 are also affected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-14145"
    },
    {
      "cve": "CVE-2020-14422",
      "cwe": {
        "id": "CWE-682",
        "name": "Incorrect Calculation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Lib/ipaddress.py in Python through 3.8.3 improperly computes hash values in the IPv4Interface and IPv6Interface classes, which might allow a remote attacker to cause a denial of service if an application is affected by the performance of a dictionary containing IPv4Interface or IPv6Interface objects, and this attacker can cause many dictionary entries to be created. This is fixed in: v3.5.10, v3.5.10rc1; v3.6.12; v3.7.9; v3.8.4, v3.8.4rc1, v3.8.5, v3.8.6, v3.8.6rc1; v3.9.0, v3.9.0b4, v3.9.0b5, v3.9.0rc1, v3.9.0rc2.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-14422"
    },
    {
      "cve": "CVE-2020-15358",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite before 3.32.3, select.c mishandles query-flattener optimization, leading to a multiSelectOrderBy heap overflow because of misuse of transitive properties for constant propagation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-15358"
    },
    {
      "cve": "CVE-2020-15523",
      "cwe": {
        "id": "CWE-427",
        "name": "Uncontrolled Search Path Element"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Python 3.6 through 3.6.10, 3.7 through 3.7.8, 3.8 through 3.8.4rc1, and 3.9 through 3.9.0b4 on Windows, a Trojan horse python3.dll might be used in cases where CPython is embedded in a native application. This occurs because python3X.dll may use an invalid search path for python3.dll loading (after Py_SetPath has been used). NOTE: this issue CANNOT occur when using python.exe from a standard (non-embedded) Python installation on Windows.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-15523"
    },
    {
      "cve": "CVE-2020-15778",
      "cwe": {
        "id": "CWE-78",
        "name": "Improper Neutralization of Special Elements used in an OS Command (\u0027OS Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "scp in OpenSSH through 8.3p1 allows command injection in the scp.c toremote function, as demonstrated by backtick characters in the destination argument. NOTE: the vendor reportedly has stated that they intentionally omit validation of \"anomalous argument transfers\" because that could \"stand a great chance of breaking existing workflows.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-15778"
    },
    {
      "cve": "CVE-2020-15801",
      "cwe": {
        "id": "CWE-426",
        "name": "Untrusted Search Path"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Python 3.8.4, sys.path restrictions specified in a python38._pth file are ignored, allowing code to be loaded from arbitrary locations. The \u003cexecutable-name\u003e._pth file (e.g., the python._pth file) is not affected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-15801"
    },
    {
      "cve": "CVE-2020-19185",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer Overflow vulnerability in one_one_mapping function in progs/dump_entry.c:1373 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-19185"
    },
    {
      "cve": "CVE-2020-19186",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer Overflow vulnerability in _nc_find_entry function in tinfo/comp_hash.c:66 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-19186"
    },
    {
      "cve": "CVE-2020-19187",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer Overflow vulnerability in fmt_entry function in progs/dump_entry.c:1100 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-19187"
    },
    {
      "cve": "CVE-2020-19188",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer Overflow vulnerability in fmt_entry function in progs/dump_entry.c:1116 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-19188"
    },
    {
      "cve": "CVE-2020-19189",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer Overflow vulnerability in postprocess_terminfo function in tinfo/parse_entry.c:997 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-19189"
    },
    {
      "cve": "CVE-2020-19190",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer Overflow vulnerability in _nc_find_entry in tinfo/comp_hash.c:70 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-19190"
    },
    {
      "cve": "CVE-2020-19909",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Integer overflow vulnerability in tool_operate.c in curl 7.65.2 via a large value as the retry delay. NOTE: many parties report that this has no direct security impact on the curl user; however, it may (in theory) cause a denial of service to associated systems or networks if, for example, --retry-delay is misinterpreted as a value much smaller than what was intended. This is not especially plausible because the overflow only happens if the user was trying to specify that curl should wait weeks (or longer) before trying to recover from a transient error.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-19909"
    },
    {
      "cve": "CVE-2020-21047",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The libcpu component which is used by libasm of elfutils version 0.177 (git 47780c9e), suffers from denial-of-service vulnerability caused by application crashes due to out-of-bounds write (CWE-787), off-by-one error (CWE-193) and reachable assertion (CWE-617); to exploit the vulnerability, the attackers need to craft certain ELF files which bypass the missing bound checks.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-21047"
    },
    {
      "cve": "CVE-2020-21913",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "International Components for Unicode (ICU-20850) v66.1 was discovered to contain a use after free bug in the pkg_createWithAssemblyCode function in the file tools/pkgdata/pkgdata.cpp.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-21913"
    },
    {
      "cve": "CVE-2020-22218",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in function _libssh2_packet_add in libssh2 1.10.0 allows attackers to access out of bounds memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-22218"
    },
    {
      "cve": "CVE-2020-24659",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in GnuTLS before 3.6.15. A server can trigger a NULL pointer dereference in a TLS 1.3 client if a no_renegotiation alert is sent with unexpected timing, and then an invalid second handshake occurs. The crash happens in the application\u0027s error handling path, where the gnutls_deinit function is called after detecting a handshake failure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-24659"
    },
    {
      "cve": "CVE-2020-24977",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNOME project libxml2 v2.9.10 has a global buffer over-read vulnerability in xmlEncodeEntitiesInternal at libxml2/entities.c. The issue has been fixed in commit 50f06b3e.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-24977"
    },
    {
      "cve": "CVE-2020-25692",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer dereference was found in OpenLDAP server and was fixed in openldap 2.4.55, during a request for renaming RDNs. An unauthenticated attacker could remotely crash the slapd process by sending a specially crafted request, causing a Denial of Service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-25692"
    },
    {
      "cve": "CVE-2020-25709",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in OpenLDAP. This flaw allows an attacker who can send a malicious packet to be processed by OpenLDAP\u2019s slapd server, to trigger an assertion failure. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-25709"
    },
    {
      "cve": "CVE-2020-25710",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in OpenLDAP in versions before 2.4.56. This flaw allows an attacker who sends a malicious packet processed by OpenLDAP to force a failed assertion in csnNormalize23(). The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-25710"
    },
    {
      "cve": "CVE-2020-26116",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "http.client in Python 3.x before 3.5.10, 3.6.x before 3.6.12, 3.7.x before 3.7.9, and 3.8.x before 3.8.5 allows CRLF injection if the attacker controls the HTTP request method, as demonstrated by inserting CR and LF control characters in the first argument of HTTPConnection.request.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.2,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-26116"
    },
    {
      "cve": "CVE-2020-27618",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The iconv function in the GNU C Library (aka glibc or libc6) 2.32 and earlier, when processing invalid multi-byte input sequences in IBM1364, IBM1371, IBM1388, IBM1390, and IBM1399 encodings, fails to advance the input state, which could lead to an infinite loop in applications, resulting in a denial of service, a different vulnerability from CVE-2016-10228.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-27618"
    },
    {
      "cve": "CVE-2020-28196",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "MIT Kerberos 5 (aka krb5) before 1.17.2 and 1.18.x before 1.18.3 allows unbounded recursion via an ASN.1-encoded Kerberos message because the lib/krb5/asn.1/asn1_encode.c support for BER indefinite lengths lacks a recursion limit.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-28196"
    },
    {
      "cve": "CVE-2020-29361",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in p11-kit 0.21.1 through 0.23.21. Multiple integer overflows have been discovered in the array allocations in the p11-kit library and the p11-kit list command, where overflow checks are missing before calling realloc or calloc.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-29361"
    },
    {
      "cve": "CVE-2020-29362",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in p11-kit 0.21.1 through 0.23.21. A heap-based buffer over-read has been discovered in the RPC protocol used by thep11-kit server/remote commands and the client library. When the remote entity supplies a byte array through a serialized PKCS#11 function call, the receiving entity may allow the reading of up to 4 bytes of memory past the heap allocation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-29362"
    },
    {
      "cve": "CVE-2020-29363",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in p11-kit 0.23.6 through 0.23.21. A heap-based buffer overflow has been discovered in the RPC protocol used by p11-kit server/remote commands and the client library. When the remote entity supplies a serialized byte array in a CK_ATTRIBUTE, the receiving entity may not allocate sufficient length for the buffer to store the deserialized value.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-29363"
    },
    {
      "cve": "CVE-2020-29562",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The iconv function in the GNU C Library (aka glibc or libc6) 2.30 to 2.32, when converting UCS4 text containing an irreversible character, fails an assertion in the code path and aborts the program, potentially resulting in a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.8,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:L/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-29562"
    },
    {
      "cve": "CVE-2020-29573",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "sysdeps/i386/ldbl2mpn.c in the GNU C Library (aka glibc or libc6) before 2.23 on x86 targets has a stack-based buffer overflow if the input to any of the printf family of functions is an 80-bit long double with a non-canonical bit pattern, as seen when passing a \\x00\\x04\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x04 value to sprintf. NOTE: the issue does not affect glibc by default in 2016 or later (i.e., 2.23 or later) because of commits made in 2015 for inlining of C99 math functions through use of GCC built-ins. In other words, the reference to 2.23 is intentional despite the mention of \"Fixed for glibc 2.33\" in the 26649 reference.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-29573"
    },
    {
      "cve": "CVE-2020-35525",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQlite 3.31.1, a potential null pointer derreference was found in the INTERSEC query processing.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-35525"
    },
    {
      "cve": "CVE-2020-35527",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite 3.31.1, there is an out of bounds access problem through ALTER TABLE for views that have a nested FROM clause.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-35527"
    },
    {
      "cve": "CVE-2020-36221",
      "cwe": {
        "id": "CWE-191",
        "name": "Integer Underflow (Wrap or Wraparound)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer underflow was discovered in OpenLDAP before 2.4.57 leading to slapd crashes in the Certificate Exact Assertion processing, resulting in denial of service (schema_init.c serialNumberAndIssuerCheck).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-36221"
    },
    {
      "cve": "CVE-2020-36222",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading to an assertion failure in slapd in the saslAuthzTo validation, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-36222"
    },
    {
      "cve": "CVE-2020-36223",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading to a slapd crash in the Values Return Filter control handling, resulting in denial of service (double free and out-of-bounds read).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-36223"
    },
    {
      "cve": "CVE-2020-36224",
      "cwe": {
        "id": "CWE-763",
        "name": "Release of Invalid Pointer or Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading to an invalid pointer free and slapd crash in the saslAuthzTo processing, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-36224"
    },
    {
      "cve": "CVE-2020-36225",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading to a double free and slapd crash in the saslAuthzTo processing, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-36225"
    },
    {
      "cve": "CVE-2020-36226",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading to a memch-\u003ebv_len miscalculation and slapd crash in the saslAuthzTo processing, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-36226"
    },
    {
      "cve": "CVE-2020-36227",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading to an infinite loop in slapd with the cancel_extop Cancel operation, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-36227"
    },
    {
      "cve": "CVE-2020-36228",
      "cwe": {
        "id": "CWE-191",
        "name": "Integer Underflow (Wrap or Wraparound)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer underflow was discovered in OpenLDAP before 2.4.57 leading to a slapd crash in the Certificate List Exact Assertion processing, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-36228"
    },
    {
      "cve": "CVE-2020-36229",
      "cwe": {
        "id": "CWE-843",
        "name": "Access of Resource Using Incompatible Type (\u0027Type Confusion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in ldap_X509dn2bv in OpenLDAP before 2.4.57 leading to a slapd crash in the X.509 DN parsing in ad_keystring, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-36229"
    },
    {
      "cve": "CVE-2020-36230",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading in an assertion failure in slapd in the X.509 DN parsing in decode.c ber_next_element, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-36230"
    },
    {
      "cve": "CVE-2021-3177",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Python 3.x through 3.9.1 has a buffer overflow in PyCArg_repr in _ctypes/callproc.c, which may lead to remote code execution in certain Python applications that accept floating-point numbers as untrusted input, as demonstrated by a 1e300 argument to c_double.from_param. This occurs because sprintf is used unsafely.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3177"
    },
    {
      "cve": "CVE-2021-3326",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The iconv function in the GNU C Library (aka glibc or libc6) 2.32 and earlier, when processing invalid input sequences in the ISO-2022-JP-3 encoding, fails an assertion in the code path and aborts the program, potentially resulting in a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3326"
    },
    {
      "cve": "CVE-2021-3426",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There\u0027s a flaw in Python 3\u0027s pydoc. A local or adjacent attacker who discovers or is able to convince another local or adjacent user to start a pydoc server could access the server and use it to disclose sensitive information belonging to the other user that they would not normally be able to access. The highest risk of this flaw is to data confidentiality. This flaw affects Python versions before 3.8.9, Python versions before 3.9.3 and Python versions before 3.10.0a7.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3426"
    },
    {
      "cve": "CVE-2021-3516",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There\u0027s a flaw in libxml2\u0027s xmllint in versions before 2.9.11. An attacker who is able to submit a crafted file to be processed by xmllint could trigger a use-after-free. The greatest impact of this flaw is to confidentiality, integrity, and availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3516"
    },
    {
      "cve": "CVE-2021-3517",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a flaw in the xml entity encoding functionality of libxml2 in versions before 2.9.11. An attacker who is able to supply a crafted file to be processed by an application linked with the affected functionality of libxml2 could trigger an out-of-bounds read. The most likely impact of this flaw is to application availability, with some potential impact to confidentiality and integrity if an attacker is able to use memory information to further exploit the application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.6,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3517"
    },
    {
      "cve": "CVE-2021-3518",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There\u0027s a flaw in libxml2 in versions before 2.9.11. An attacker who is able to submit a crafted file to be processed by an application linked with libxml2 could trigger a use-after-free. The greatest impact from this flaw is to confidentiality, integrity, and availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3518"
    },
    {
      "cve": "CVE-2021-3520",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There\u0027s a flaw in lz4. An attacker who submits a crafted file to an application linked with lz4 may be able to trigger an integer overflow, leading to calling of memmove() on a negative size argument, causing an out-of-bounds write and/or a crash. The greatest impact of this flaw is to availability, with some potential impact to confidentiality and integrity as well.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3520"
    },
    {
      "cve": "CVE-2021-3537",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability found in libxml2 in versions before 2.9.11 shows that it did not propagate errors while parsing XML mixed content, causing a NULL dereference. If an untrusted XML document was parsed in recovery mode and post-validated, the flaw could be used to crash the application. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3537"
    },
    {
      "cve": "CVE-2021-3541",
      "cwe": {
        "id": "CWE-776",
        "name": "Improper Restriction of Recursive Entity References in DTDs (\u0027XML Entity Expansion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in libxml2. Exponential entity expansion attack its possible bypassing all existing protection mechanisms and leading to denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3541"
    },
    {
      "cve": "CVE-2021-3580",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the way nettle\u0027s RSA decryption functions handled specially crafted ciphertext. An attacker could use this flaw to provide a manipulated ciphertext leading to application crash and denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3580"
    },
    {
      "cve": "CVE-2021-3733",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There\u0027s a flaw in urllib\u0027s AbstractBasicAuthHandler class. An attacker who controls a malicious HTTP server that an HTTP client (such as web browser) connects to, could trigger a Regular Expression Denial of Service (ReDOS) during an authentication request with a specially crafted payload that is sent by the server to the client. The greatest threat that this flaw poses is to application availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3733"
    },
    {
      "cve": "CVE-2021-3737",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in python. An improperly handled HTTP response in the HTTP client code of python may allow a remote attacker, who controls the HTTP server, to make the client script enter an infinite loop, consuming CPU time. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3737"
    },
    {
      "cve": "CVE-2021-3826",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Heap/stack buffer overflow in the dlang_lname function in d-demangle.c in libiberty allows attackers to potentially cause a denial of service (segmentation fault and crash) via a crafted mangled symbol.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3826"
    },
    {
      "cve": "CVE-2021-3997",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in systemd. An uncontrolled recursion in systemd-tmpfiles may lead to a denial of service at boot time when too many nested directories are created in /tmp.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3997"
    },
    {
      "cve": "CVE-2021-3998",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in glibc. The realpath() function can mistakenly return an unexpected value, potentially leading to information leakage and disclosure of sensitive data.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3998"
    },
    {
      "cve": "CVE-2021-3999",
      "cwe": {
        "id": "CWE-193",
        "name": "Off-by-one Error"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in glibc. An off-by-one buffer overflow and underflow in getcwd() may lead to memory corruption when the size of the buffer is exactly 1. A local attacker who can control the input buffer and size passed to getcwd() in a setuid program could use this flaw to potentially execute arbitrary code and escalate their privileges on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3999"
    },
    {
      "cve": "CVE-2021-4122",
      "cwe": {
        "id": "CWE-345",
        "name": "Insufficient Verification of Data Authenticity"
      },
      "notes": [
        {
          "category": "summary",
          "text": "It was found that a specially crafted LUKS header could trick cryptsetup into disabling encryption during the recovery of the device. An attacker with physical access to the medium, such as a flash disk, could use this flaw to force a user into permanently disabling the encryption layer of that medium.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:P/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-4122"
    },
    {
      "cve": "CVE-2021-4189",
      "cwe": {
        "id": "CWE-252",
        "name": "Unchecked Return Value"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in Python, specifically in the FTP (File Transfer Protocol) client library in PASV (passive) mode. The issue is how the FTP client trusts the host from the PASV response by default. This flaw allows an attacker to set up a malicious FTP server that can trick FTP clients into connecting back to a given IP address and port. This vulnerability could lead to FTP client scanning ports, which otherwise would not have been possible.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-4189"
    },
    {
      "cve": "CVE-2021-4209",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer dereference flaw was found in GnuTLS. As Nettle\u0027s hash update functions internally call memcpy, providing zero-length input may cause undefined behavior. This flaw leads to a denial of service after authentication in rare circumstances.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-4209"
    },
    {
      "cve": "CVE-2021-20193",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the src/list.c of tar 1.33 and earlier. This flaw allows an attacker who can submit a crafted input file to tar to cause uncontrolled consumption of memory. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-20193"
    },
    {
      "cve": "CVE-2021-20227",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in SQLite\u0027s SELECT query functionality (src/select.c). This flaw allows an attacker who is capable of running SQL queries locally on the SQLite database to cause a denial of service or possible code execution by triggering a use-after-free. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-20227"
    },
    {
      "cve": "CVE-2021-20231",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in gnutls. A use after free issue in client sending key_share extension may lead to memory corruption and other consequences.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-20231"
    },
    {
      "cve": "CVE-2021-20232",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in gnutls. A use after free issue in client_send_params in lib/ext/pre_shared_key.c may lead to memory corruption and other potential consequences.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-20232"
    },
    {
      "cve": "CVE-2021-20305",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in Nettle in versions before 3.7.2, where several Nettle signature verification functions (GOST DSA, EDDSA \u0026 ECDSA) result in the Elliptic Curve Cryptography point (ECC) multiply function being called with out-of-range scalers, possibly resulting in incorrect results. This flaw allows an attacker to force an invalid signature, causing an assertion failure or possible validation. The highest threat to this vulnerability is to confidentiality, integrity, as well as system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-20305"
    },
    {
      "cve": "CVE-2021-22876",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl 7.1.1 to and including 7.75.0 is vulnerable to an \"Exposure of Private Personal Information to an Unauthorized Actor\" by leaking credentials in the HTTP Referer: header. libcurl does not strip off user credentials from the URL when automatically populating the Referer: HTTP request header field in outgoing HTTP requests, and therefore risks leaking sensitive data to the server that is the target of the second HTTP request.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-22876"
    },
    {
      "cve": "CVE-2021-22890",
      "cwe": {
        "id": "CWE-290",
        "name": "Authentication Bypass by Spoofing"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl 7.63.0 to and including 7.75.0 includes vulnerability that allows a malicious HTTPS proxy to MITM a connection due to bad handling of TLS 1.3 session tickets. When using a HTTPS proxy and TLS 1.3, libcurl can confuse session tickets arriving from the HTTPS proxy but work as if they arrived from the remote server and then wrongly \"short-cut\" the host handshake. When confusing the tickets, a HTTPS proxy can trick libcurl to use the wrong session ticket resume for the host and thereby circumvent the server TLS certificate check and make a MITM attack to be possible to perform unnoticed. Note that such a malicious HTTPS proxy needs to provide a certificate that curl will accept for the MITMed server for an attack to work - unless curl has been told to ignore the server certificate check.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-22890"
    },
    {
      "cve": "CVE-2021-22897",
      "cwe": {
        "id": "CWE-668",
        "name": "Exposure of Resource to Wrong Sphere"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl 7.61.0 through 7.76.1 suffers from exposure of data element to wrong session due to a mistake in the code for CURLOPT_SSL_CIPHER_LIST when libcurl is built to use the Schannel TLS library. The selected cipher set was stored in a single \"static\" variable in the library, which has the surprising side-effect that if an application sets up multiple concurrent transfers, the last one that sets the ciphers will accidentally control the set used by all transfers. In a worst-case scenario, this weakens transport security significantly.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-22897"
    },
    {
      "cve": "CVE-2021-22898",
      "cwe": {
        "id": "CWE-909",
        "name": "Missing Initialization of Resource"
      },
      "notes": [
        {
          "category": "summary",
          "text": "**NOTE: CVE-2021-22898 is an incomplete fix (see https://hackerone.com/reports/1223882)! Check if affected products also have fixed CVE-22925 instead! Do not use CVE-2021-22898 in public advisories!**\r\n\r\ncurl 7.7 through 7.76.1 suffers from an information disclosure when the `-t` command line option, known as `CURLOPT_TELNETOPTIONS` in libcurl, is used to send variable=content pairs to TELNET servers. Due to a flaw in the option parser for sending NEW_ENV variables, libcurl could be made to pass on uninitialized data from a stack based buffer to the server, resulting in potentially revealing sensitive internal information to the server using a clear-text network protocol.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.1,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-22898"
    },
    {
      "cve": "CVE-2021-22901",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl 7.75.0 through 7.76.1 suffers from a use-after-free vulnerability resulting in already freed memory being used when a TLS 1.3 session ticket arrives over a connection. A malicious server can use this in rare unfortunate circumstances to potentially reach remote code execution in the client. When libcurl at run-time sets up support for TLS 1.3 session tickets on a connection using OpenSSL, it stores pointers to the transfer in-memory object for later retrieval when a session ticket arrives. If the connection is used by multiple transfers (like with a reused HTTP/1.1 connection or multiplexed HTTP/2 connection) that first transfer object might be freed before the new session is established on that connection and then the function will access a memory buffer that might be freed. When using that memory, libcurl might even call a function pointer in the object, making it possible for a remote code execution if the server could somehow manage to get crafted memory content into the correct place in memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-22901"
    },
    {
      "cve": "CVE-2021-22922",
      "cwe": {
        "id": "CWE-354",
        "name": "Improper Validation of Integrity Check Value"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl is instructed to download content using the metalink feature, thecontents is verified against a hash provided in the metalink XML file.The metalink XML file points out to the client how to get the same contentfrom a set of different URLs, potentially hosted by different servers and theclient can then download the file from one or several of them. In a serial orparallel manner.If one of the servers hosting the contents has been breached and the contentsof the specific file on that server is replaced with a modified payload, curlshould detect this when the hash of the file mismatches after a completeddownload. It should remove the contents and instead try getting the contentsfrom another URL. This is not done, and instead such a hash mismatch is onlymentioned in text and the potentially malicious content is kept in the file ondisk.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-22922"
    },
    {
      "cve": "CVE-2021-22923",
      "cwe": {
        "id": "CWE-522",
        "name": "Insufficiently Protected Credentials"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl is instructed to get content using the metalink feature, and a user name and password are used to download the metalink XML file, those same credentials are then subsequently passed on to each of the servers from which curl will download or try to download the contents from. Often contrary to the user\u0027s expectations and intentions and without telling the user it happened.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-22923"
    },
    {
      "cve": "CVE-2021-22924",
      "cwe": {
        "id": "CWE-706",
        "name": "Use of Incorrectly-Resolved Name or Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl keeps previously used connections in a connection pool for subsequent transfers to reuse, if one of them matches the setup. Due to errors in the logic, the config matching function did not take \u0027issuercert\u0027 into account and it compared the involved paths *case insensitively*, which could lead to libcurl reusing wrong connections. File paths are, or can be, case sensitive on many systems but not all, and can even vary depending on used file systems. The comparison also didn\u0027t include the \u0027issuer cert\u0027 which a transfer can set to qualify how to verify the server certificate.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-22924"
    },
    {
      "cve": "CVE-2021-22925",
      "cwe": {
        "id": "CWE-908",
        "name": "Use of Uninitialized Resource"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl supports the `-t` command line option, known as `CURLOPT_TELNETOPTIONS` in libcurl. This rarely used option is used to send variable=content pairs to TELNET servers. Due to flaw in the option parser for sending `NEW_ENV` variables, libcurl could be made to pass on uninitialized data from a stack based buffer to the server. Therefore potentially revealing sensitive internal information to the server using a clear-text network protocol. This could happen because curl did not call and use sscanf() correctly when parsing the string provided by the application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-22925"
    },
    {
      "cve": "CVE-2021-22926",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl-using applications can ask for a specific client certificate to be used in a transfer. This is done with the `CURLOPT_SSLCERT` option (`--cert` with the command line tool).When libcurl is built to use the macOS native TLS library Secure Transport, an application can ask for the client certificate by name or with a file name - using the same option. If the name exists as a file, it will be used instead of by name.If the appliction runs with a current working directory that is writable by other users (like `/tmp`), a malicious user can create a file name with the same name as the app wants to use by name, and thereby trick the application to use the file based cert instead of the one referred to by name making libcurl send the wrong client certificate in the TLS connection handshake.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-22926"
    },
    {
      "cve": "CVE-2021-22945",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When sending data to an MQTT server, libcurl \u003c= 7.73.0 and 7.78.0 could in some circumstances erroneously keep a pointer to an already freed memory area and both use that again in a subsequent call to send data and also free it *again*.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-22945"
    },
    {
      "cve": "CVE-2021-22946",
      "cwe": {
        "id": "CWE-319",
        "name": "Cleartext Transmission of Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A user can tell curl \u003e= 7.20.0 and \u003c= 7.78.0 to require a successful upgrade to TLS when speaking to an IMAP, POP3 or FTP server (`--ssl-reqd` on the command line or`CURLOPT_USE_SSL` set to `CURLUSESSL_CONTROL` or `CURLUSESSL_ALL` withlibcurl). This requirement could be bypassed if the server would return a properly crafted but perfectly legitimate response.This flaw would then make curl silently continue its operations **withoutTLS** contrary to the instructions and expectations, exposing possibly sensitive data in clear text over the network.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-22946"
    },
    {
      "cve": "CVE-2021-22947",
      "cwe": {
        "id": "CWE-345",
        "name": "Insufficient Verification of Data Authenticity"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl \u003e= 7.20.0 and \u003c= 7.78.0 connects to an IMAP or POP3 server to retrieve data using STARTTLS to upgrade to TLS security, the server can respond and send back multiple responses at once that curl caches. curl would then upgrade to TLS but not flush the in-queue of cached responses but instead continue using and trustingthe responses it got *before* the TLS handshake as if they were authenticated.Using this flaw, it allows a Man-In-The-Middle attacker to first inject the fake responses, then pass-through the TLS traffic from the legitimate server and trick curl into sending data back to the user thinking the attacker\u0027s injected data comes from the TLS-protected server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-22947"
    },
    {
      "cve": "CVE-2021-23336",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The package python/cpython from 0 and before 3.6.13, from 3.7.0 and before 3.7.10, from 3.8.0 and before 3.8.8, from 3.9.0 and before 3.9.2 are vulnerable to Web Cache Poisoning via urllib.parse.parse_qsl and urllib.parse.parse_qs by using a vector called parameter cloaking. When the attacker can separate query parameters using a semicolon (;), they can cause a difference in the interpretation of the request between the proxy (running with default configuration) and the server. This can result in malicious requests being cached as completely safe ones, as the proxy would usually not see the semicolon as a separator, and therefore would not include it in a cache key of an unkeyed parameter.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:N/I:L/A:H/E:P/RL:U/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-23336"
    },
    {
      "cve": "CVE-2021-27212",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In OpenLDAP through 2.4.57 and 2.5.x through 2.5.1alpha, an assertion failure in slapd can occur in the issuerAndThisUpdateCheck function via a crafted packet, resulting in a denial of service (daemon exit) via a short timestamp. This is related to schema_init.c and checkTime.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-27212"
    },
    {
      "cve": "CVE-2021-27218",
      "cwe": {
        "id": "CWE-681",
        "name": "Incorrect Conversion between Numeric Types"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in GNOME GLib before 2.66.7 and 2.67.x before 2.67.4. If g_byte_array_new_take() was called with a buffer of 4GB or more on a 64-bit platform, the length would be truncated modulo 2**32, causing unintended length truncation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-27218"
    },
    {
      "cve": "CVE-2021-27219",
      "cwe": {
        "id": "CWE-681",
        "name": "Incorrect Conversion between Numeric Types"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in GNOME GLib before 2.66.6 and 2.67.x before 2.67.3. The function g_bytes_new has an integer overflow on 64-bit platforms due to an implicit cast from 64 bits to 32 bits. The overflow could potentially lead to memory corruption.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-27219"
    },
    {
      "cve": "CVE-2021-27645",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The nameserver caching daemon (nscd) in the GNU C Library (aka glibc or libc6) 2.29 through 2.33, when processing a request for netgroup lookup, may crash due to a double-free, potentially resulting in degraded service or Denial of Service on the local system. This is related to netgroupcache.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 2.5,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-27645"
    },
    {
      "cve": "CVE-2021-28041",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ssh-agent in OpenSSH before 8.5 has a double free that may be relevant in a few less-common scenarios, such as unconstrained agent-socket access on a legacy operating system, or the forwarding of an agent to an attacker-controlled host.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:L/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-28041"
    },
    {
      "cve": "CVE-2021-28153",
      "cwe": {
        "id": "CWE-59",
        "name": "Improper Link Resolution Before File Access (\u0027Link Following\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in GNOME GLib before 2.66.8. When g_file_replace() is used with G_FILE_CREATE_REPLACE_DESTINATION to replace a path that is a dangling symlink, it incorrectly also creates the target of the symlink as an empty file, which could conceivably have security relevance if the symlink is attacker-controlled. (If the path is a symlink to a file that already exists, then the contents of that file correctly remain unchanged.)",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-28153"
    },
    {
      "cve": "CVE-2021-28363",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The urllib3 library 1.26.x before 1.26.4 for Python omits SSL certificate validation in some cases involving HTTPS to HTTPS proxies. The initial connection to the HTTPS proxy (if an SSLContext isn\u0027t given via proxy_config) doesn\u0027t verify the hostname of the certificate. This means certificates for different servers that still validate properly with the default urllib3 SSLContext will be silently accepted.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-28363"
    },
    {
      "cve": "CVE-2021-28861",
      "cwe": {
        "id": "CWE-601",
        "name": "URL Redirection to Untrusted Site (\u0027Open Redirect\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Python 3.x through 3.10 has an open redirection vulnerability in lib/http/server.py due to no protection against multiple (/) at the beginning of URI path which may leads to information disclosure. NOTE: this is disputed by a third party because the http.server.html documentation page states \"Warning: http.server is not recommended for production. It only implements basic security checks.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-28861"
    },
    {
      "cve": "CVE-2021-31239",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue found in SQLite SQLite3 v.3.35.4 that could allow a remote attacker to cause a denial of service via the appendvfs.c function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-31239"
    },
    {
      "cve": "CVE-2021-32292",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in json-c from 20200420 (post 0.14 unreleased code) through 0.15-20200726. A stack-buffer-overflow exists in the auxiliary sample program json_parse which is located in the function parseit.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-32292"
    },
    {
      "cve": "CVE-2021-33294",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In elfutils 0.183, an infinite loop was found in the function handle_symtab in readelf.c .Which allows attackers to cause a denial of service (infinite loop) via crafted file.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-33294"
    },
    {
      "cve": "CVE-2021-33560",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Libgcrypt before 1.8.8 and 1.9.x before 1.9.3 mishandles ElGamal encryption because it lacks exponent blinding to address a side-channel attack against mpi_powm, and the window size is not chosen appropriately. This, for example, affects use of ElGamal in OpenPGP.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-33560"
    },
    {
      "cve": "CVE-2021-33574",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The mq_notify function in the GNU C Library (aka glibc) versions 2.32 and 2.33 has a use-after-free. It may use the notification thread attributes object (passed through its struct sigevent parameter) after it has been freed by the caller, leading to a denial of service (application crash) or possibly unspecified other impact.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-33574"
    },
    {
      "cve": "CVE-2021-33910",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The use of alloca function with an uncontrolled size in function unit_name_path_escape allows a local attacker, able to mount a filesystem on a very long path, to crash systemd and the whole system by allocating a very large space in the stack.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-33910"
    },
    {
      "cve": "CVE-2021-35942",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The wordexp function in the GNU C Library (aka glibc) through 2.33 may crash or read arbitrary memory in parse_param (in posix/wordexp.c) when called with an untrusted, crafted pattern, potentially resulting in a denial of service or disclosure of information. This occurs because atoi was used but strtoul should have been used to ensure correct calculations.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-35942"
    },
    {
      "cve": "CVE-2021-36084",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The CIL compiler in SELinux 3.2 has a use-after-free in __cil_verify_classperms (called from __cil_verify_classpermission and __cil_pre_verify_helper).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-36084"
    },
    {
      "cve": "CVE-2021-36085",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The CIL compiler in SELinux 3.2 has a use-after-free in __cil_verify_classperms (called from __verify_map_perm_classperms and hashtab_map).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-36085"
    },
    {
      "cve": "CVE-2021-36086",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The CIL compiler in SELinux 3.2 has a use-after-free in cil_reset_classpermission (called from cil_reset_classperms_set and cil_reset_classperms_list).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-36086"
    },
    {
      "cve": "CVE-2021-36087",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The CIL compiler in SELinux 3.2 has a heap-based buffer over-read in ebitmap_match_any (called indirectly from cil_check_neverallow). This occurs because there is sometimes a lack of checks for invalid statements in an optional block.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-36087"
    },
    {
      "cve": "CVE-2021-36222",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ec_verify in kdc/kdc_preauth_ec.c in the Key Distribution Center (KDC) in MIT Kerberos 5 (aka krb5) before 1.18.4 and 1.19.x before 1.19.2 allows remote attackers to cause a NULL pointer dereference and daemon crash. This occurs because a return value is not properly managed in a certain situation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-36222"
    },
    {
      "cve": "CVE-2021-36690",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A segmentation fault can occur in the sqlite3.exe command-line component of SQLite 3.36.0 via the idxGetTableInfo function when there is a crafted SQL query. NOTE: the vendor disputes the relevance of this report because a sqlite3.exe user already has full privileges (e.g., is intentionally allowed to execute commands). This report does NOT imply any problem in the SQLite library.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-36690"
    },
    {
      "cve": "CVE-2021-37600",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer overflow in util-linux through 2.37.1 can potentially cause a buffer overflow if an attacker were able to use system resources in a way that leads to a large number in the /proc/sysvipc/sem file. NOTE: this is unexploitable in GNU C Library environments, and possibly in all realistic environments",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-37600"
    },
    {
      "cve": "CVE-2021-37750",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The Key Distribution Center (KDC) in MIT Kerberos 5 (aka krb5) before 1.18.5 and 1.19.x before 1.19.3 has a NULL pointer dereference in kdc/do_tgs_req.c via a FAST inner body that lacks a server field.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-37750"
    },
    {
      "cve": "CVE-2021-38604",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In librt in the GNU C Library (aka glibc) through 2.34, sysdeps/unix/sysv/linux/mq_notify.c mishandles certain NOTIFY_REMOVED data, leading to a NULL pointer dereference. NOTE: this vulnerability was introduced as a side effect of the CVE-2021-33574 fix.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-38604"
    },
    {
      "cve": "CVE-2021-41617",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "sshd in OpenSSH 6.2 through 8.x before 8.8, when certain non-default configurations are used, allows privilege escalation because supplemental groups are not initialized as expected. Helper programs for AuthorizedKeysCommand and AuthorizedPrincipalsCommand may run with privileges associated with group memberships of the sshd process, if the configuration specifies running the command as a different user.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-41617"
    },
    {
      "cve": "CVE-2021-43396",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "** DISPUTED ** In iconvdata/iso-2022-jp-3.c in the GNU C Library (aka glibc) 2.34, remote attackers can force iconv() to emit a spurious \u0027\\0\u0027 character via crafted ISO-2022-JP-3 data that is accompanied by an internal state reset. This may affect data integrity in certain iconv() use cases. NOTE: the vendor states \"the bug cannot be invoked through user input and requires iconv to be invoked with a NULL inbuf, which ought to require a separate application bug to do so unintentionally. Hence there\u0027s no security impact to the bug.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-43396"
    },
    {
      "cve": "CVE-2021-43618",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU Multiple Precision Arithmetic Library (GMP) through 6.2.1 has an mpz/inp_raw.c integer overflow and resultant buffer overflow via crafted input, leading to a segmentation fault on 32-bit platforms.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-43618"
    },
    {
      "cve": "CVE-2021-44879",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In gc_data_segment in fs/f2fs/gc.c in the Linux kernel before 5.16.3, special files are not considered, leading to a move_data_page NULL pointer dereference.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-44879"
    },
    {
      "cve": "CVE-2021-45960",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Expat (aka libexpat) before 2.4.3, a left shift by 29 (or more) places in the storeAtts function in xmlparse.c can lead to realloc misbehavior (e.g., allocating too few bytes, or only freeing memory).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-45960"
    },
    {
      "cve": "CVE-2021-46143",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In doProlog in xmlparse.c in Expat (aka libexpat) before 2.4.3, an integer overflow exists for m_groupSize.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-46143"
    },
    {
      "cve": "CVE-2021-46195",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GCC v12.0 was discovered to contain an uncontrolled recursion via the component libiberty/rust-demangle.c. This vulnerability allows attackers to cause a Denial of Service (DoS) by consuming excessive CPU and memory resources.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-46195"
    },
    {
      "cve": "CVE-2021-46828",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libtirpc before 1.3.3rc1, remote attackers could exhaust the file descriptors of a process that uses libtirpc because idle TCP connections are mishandled. This can, in turn, lead to an svc_run infinite loop without accepting new connections.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-46828"
    },
    {
      "cve": "CVE-2021-46848",
      "cwe": {
        "id": "CWE-193",
        "name": "Off-by-one Error"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU Libtasn1 before 4.19.0 has an ETYPE_OK off-by-one array size check that affects asn1_encode_simple_der.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-46848"
    },
    {
      "cve": "CVE-2022-0391",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in Python, specifically within the urllib.parse module. This module helps break Uniform Resource Locator (URL) strings into components. The issue involves how the urlparse method does not sanitize input and allows characters like \u0027\\r\u0027 and \u0027\\n\u0027 in the URL path. This flaw allows an attacker to input a crafted URL, leading to injection attacks. This flaw affects Python versions prior to 3.10.0b1, 3.9.5, 3.8.11, 3.7.11 and 3.6.14.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-0391"
    },
    {
      "cve": "CVE-2022-0563",
      "cwe": {
        "id": "CWE-209",
        "name": "Generation of Error Message Containing Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the util-linux chfn and chsh utilities when compiled with Readline support. The Readline library uses an \"INPUTRC\" environment variable to get a path to the library config file. When the library cannot parse the specified file, it prints an error message containing data from the file. This flaw allows an unprivileged user to read root-owned files, potentially leading to privilege escalation. This flaw affects util-linux versions prior to 2.37.4.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-0563"
    },
    {
      "cve": "CVE-2022-0778",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The BN_mod_sqrt() function in openSSL, which computes a modular square root, contains a bug that can cause it to loop forever for non-prime moduli. Internally this function is used when parsing certificates that contain elliptic curve public keys in compressed form or explicit elliptic curve parameters with a base point encoded in compressed form. It is possible to trigger the infinite loop by crafting a certificate that has invalid explicit curve parameters. Since certificate parsing happens prior to verification of the certificate signature, any process that parses an externally supplied certificate may thus be subject to a denial of service attack. The infinite loop can also be reached when parsing crafted private keys as they can contain explicit elliptic curve parameters.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-0778"
    },
    {
      "cve": "CVE-2022-1271",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An arbitrary file write vulnerability was found in GNU gzip\u0027s zgrep utility. When zgrep is applied on the attacker\u0027s chosen file name (for example, a crafted file name), this can overwrite an attacker\u0027s content to an arbitrary attacker-selected file. This flaw occurs due to insufficient validation when processing filenames with two or more newlines where selected content and the target file names are embedded in crafted multi-line file names. This flaw allows a remote, low privileged attacker to force zgrep to write arbitrary files on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-1271"
    },
    {
      "cve": "CVE-2022-1292",
      "cwe": {
        "id": "CWE-78",
        "name": "Improper Neutralization of Special Elements used in an OS Command (\u0027OS Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The c_rehash script does not properly sanitise shell metacharacters to prevent command injection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-1292"
    },
    {
      "cve": "CVE-2022-1304",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds read/write vulnerability was found in e2fsprogs 1.46.5. This issue leads to a segmentation fault and possibly arbitrary code execution via a specially crafted filesystem.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-1304"
    },
    {
      "cve": "CVE-2022-1343",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Under certain circumstances, the command line OCSP verify function reports successful verification when the verification in fact failed. In this case the incorrect successful response will also be accompanied by error messages showing the failure and contradicting the apparently successful result.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-1343"
    },
    {
      "cve": "CVE-2022-1434",
      "cwe": {
        "id": "CWE-327",
        "name": "Use of a Broken or Risky Cryptographic Algorithm"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When using the RC4-MD5 ciphersuite, which is disabled by default, an attacker is able to modify data in transit due to an incorrect use of the AAD data as the MAC key in OpenSSL 3.0. An attacker is not able to decrypt any communication.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-1434"
    },
    {
      "cve": "CVE-2022-1473",
      "cwe": {
        "id": "CWE-404",
        "name": "Improper Resource Shutdown or Release"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The used OpenSSL version improperly reuses memory when decoding certificates or keys. This can lead to a process termination and Denial of Service for long lived processes.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-1473"
    },
    {
      "cve": "CVE-2022-2068",
      "cwe": {
        "id": "CWE-78",
        "name": "Improper Neutralization of Special Elements used in an OS Command (\u0027OS Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In addition to the c_rehash shell command injection identified in CVE-2022-1292, further circumstances where the c_rehash script does not properly sanitise shell metacharacters to prevent command injection were found by code review. When the CVE-2022-1292 was fixed it was not discovered that there are other places in the script where the file names of certificates being hashed were possibly passed to a command executed through the shell. This script is distributed by some operating systems in a manner where it is automatically executed. On such operating systems, an attacker could execute arbitrary commands with the privileges of the script. Use of the c_rehash script is considered obsolete and should be replaced by the OpenSSL rehash command line tool.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-2068"
    },
    {
      "cve": "CVE-2022-2097",
      "cwe": {
        "id": "CWE-326",
        "name": "Inadequate Encryption Strength"
      },
      "notes": [
        {
          "category": "summary",
          "text": "AES OCB mode for 32-bit x86 platforms using the AES-NI assembly optimised implementation will not encrypt the entirety of the data under some circumstances. This could reveal sixteen bytes of data that was preexisting in the memory that wasn\u0027t written. In the special case of \"in place\" encryption, sixteen bytes of the plaintext would be revealed. Since OpenSSL does not support OCB based cipher suites for TLS and DTLS, they are both unaffected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-2097"
    },
    {
      "cve": "CVE-2022-2274",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The OpenSSL 3.0.4 release introduced a serious bug in the RSA implementation for X86_64 CPUs supporting the AVX512IFMA instructions. This issue makes the RSA implementation with 2048 bit private keys incorrect on such machines and memory corruption will happen during the computation. As a consequence of the memory corruption an attacker may be able to trigger a remote code execution on the machine performing the computation. SSL/TLS servers or other servers using 2048 bit RSA private keys running on machines supporting AVX512IFMA instructions of the X86_64 architecture are affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-2274"
    },
    {
      "cve": "CVE-2022-2509",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability found in gnutls. This security flaw happens because of a double free error occurs during verification of pkcs7 signatures in gnutls_pkcs7_verify function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-2509"
    },
    {
      "cve": "CVE-2022-3715",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the bash package, where a heap-buffer overflow can occur in valid parameter_transform. This issue may lead to memory problems.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-3715"
    },
    {
      "cve": "CVE-2022-3821",
      "cwe": {
        "id": "CWE-193",
        "name": "Off-by-one Error"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An off-by-one Error issue was discovered in Systemd in format_timespan() function of time-util.c. An attacker could supply specific values for time and accuracy that leads to buffer overrun in format_timespan(), leading to a Denial of Service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-3821"
    },
    {
      "cve": "CVE-2022-4304",
      "cwe": {
        "id": "CWE-326",
        "name": "Inadequate Encryption Strength"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A timing based side channel exists in the OpenSSL RSA Decryption implementation which could be sufficient to recover a plaintext across a network in a Bleichenbacher style attack. To achieve a successful decryption an attacker would have to be able to send a very large number of trial messages for decryption. The vulnerability affects all RSA padding modes: PKCS#1 v1.5, RSA-OEAP and RSASVE. For example, in a TLS connection, RSA is commonly used by a client to send an encrypted pre-master secret to the server. An attacker that had observed a genuine connection between a client and a server could use this flaw to send trial messages to the server and record the time taken to process them. After a sufficiently large number of messages the attacker could recover the pre-master secret used for the original connection and thus be able to decrypt the application data sent over that connection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-4304"
    },
    {
      "cve": "CVE-2022-4450",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The function PEM_read_bio_ex() reads a PEM file from a BIO and parses and decodes the \"name\" (e.g. \"CERTIFICATE\"), any header data and the payload data. If the function succeeds then the \"name_out\", \"header\" and \"data\" arguments are populated with pointers to buffers containing the relevant decoded data. The caller is responsible for freeing those buffers. It is possible to construct a PEM file that results in 0 bytes of payload data. In this case PEM_read_bio_ex() will return a failure code but will populate the header argument with a pointer to a buffer that has already been freed. If the caller also frees this buffer then a double free will occur. This will most likely lead to a crash. This could be exploited by an attacker who has the ability to supply malicious PEM files for parsing to achieve a denial of service attack. The functions PEM_read_bio() and PEM_read() are simple wrappers around PEM_read_bio_ex() and therefore these functions are also directly affected. These functions are also called indirectly by a number of other OpenSSL functions including PEM_X509_INFO_read_bio_ex() and SSL_CTX_use_serverinfo_file() which are also vulnerable. Some OpenSSL internal uses of these functions are not vulnerable because the caller does not free the header argument if PEM_read_bio_ex() returns a failure code. These locations include the PEM_read_bio_TYPE() functions as well as the decoders introduced in OpenSSL 3.0. The OpenSSL asn1parse command line application is also impacted by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-4450"
    },
    {
      "cve": "CVE-2022-22576",
      "cwe": {
        "id": "CWE-287",
        "name": "Improper Authentication"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S), IMAP(S), POP3(S) and LDAP(S) (openldap only).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-22576"
    },
    {
      "cve": "CVE-2022-22822",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "addBinding in xmlparse.c in Expat (aka libexpat) before 2.4.3 has an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-22822"
    },
    {
      "cve": "CVE-2022-22823",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "build_model in xmlparse.c in Expat (aka libexpat) before 2.4.3 has an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-22823"
    },
    {
      "cve": "CVE-2022-22824",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "defineAttribute in xmlparse.c in Expat (aka libexpat) before 2.4.3 has an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-22824"
    },
    {
      "cve": "CVE-2022-22825",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "lookup in xmlparse.c in Expat (aka libexpat) before 2.4.3 has an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-22825"
    },
    {
      "cve": "CVE-2022-22826",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nextScaffoldPart in xmlparse.c in Expat (aka libexpat) before 2.4.3 has an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-22826"
    },
    {
      "cve": "CVE-2022-22827",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "storeAtts in xmlparse.c in Expat (aka libexpat) before 2.4.3 has an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-22827"
    },
    {
      "cve": "CVE-2022-23218",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The deprecated compatibility function svcunix_create in the sunrpc module of the GNU C Library (aka glibc) through 2.34 copies its path argument on the stack without validating its length, which may result in a buffer overflow, potentially resulting in a denial of service or (if an application is not built with a stack protector enabled) arbitrary code execution.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-23218"
    },
    {
      "cve": "CVE-2022-23219",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The deprecated compatibility function clnt_create in the sunrpc module of the GNU C Library (aka glibc) through 2.34 copies its hostname argument on the stack without validating its length, which may result in a buffer overflow, potentially resulting in a denial of service or (if an application is not built with a stack protector enabled) arbitrary code execution.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-23219"
    },
    {
      "cve": "CVE-2022-23308",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "valid.c in libxml2 before 2.9.13 has a use-after-free of ID and IDREF attributes.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-23308"
    },
    {
      "cve": "CVE-2022-23852",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Expat (aka libexpat) before 2.4.4 has a signed integer overflow in XML_GetBuffer, for configurations with a nonzero XML_CONTEXT_BYTES.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-23852"
    },
    {
      "cve": "CVE-2022-23990",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Expat (aka libexpat) before 2.4.4 has an integer overflow in the doProlog function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-23990"
    },
    {
      "cve": "CVE-2022-24407",
      "cwe": {
        "id": "CWE-89",
        "name": "Improper Neutralization of Special Elements used in an SQL Command (\u0027SQL Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Cyrus SASL 2.1.17 through 2.1.27 before 2.1.28, plugins/sql.c does not escape the password for a SQL INSERT or UPDATE statement.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-24407"
    },
    {
      "cve": "CVE-2022-25235",
      "cwe": {
        "id": "CWE-116",
        "name": "Improper Encoding or Escaping of Output"
      },
      "notes": [
        {
          "category": "summary",
          "text": "xmltok_impl.c in Expat (aka libexpat) before 2.4.5 lacks certain validation of encoding, such as checks for whether a UTF-8 character is valid in a certain context.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-25235"
    },
    {
      "cve": "CVE-2022-25236",
      "cwe": {
        "id": "CWE-668",
        "name": "Exposure of Resource to Wrong Sphere"
      },
      "notes": [
        {
          "category": "summary",
          "text": "xmlparse.c in Expat (aka libexpat) before 2.4.5 allows attackers to insert namespace-separator characters into namespace URIs.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-25236"
    },
    {
      "cve": "CVE-2022-25313",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Expat (aka libexpat) before 2.4.5, an attacker can trigger stack exhaustion in build_model via a large nesting depth in the DTD element.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-25313"
    },
    {
      "cve": "CVE-2022-25314",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Expat (aka libexpat) before 2.4.5, there is an integer overflow in copyString.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-25314"
    },
    {
      "cve": "CVE-2022-25315",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Expat (aka libexpat) before 2.4.5, there is an integer overflow in storeRawNames.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-25315"
    },
    {
      "cve": "CVE-2022-26488",
      "cwe": {
        "id": "CWE-426",
        "name": "Untrusted Search Path"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Python before 3.10.3 on Windows, local users can gain privileges because the search path is inadequately secured. The installer may allow a local attacker to add user-writable directories to the system search path. To exploit, an administrator must have installed Python for all users and enabled PATH entries. A non-administrative user can trigger a repair that incorrectly adds user-writable paths into PATH, enabling search-path hijacking of other users and system services. This affects Python (CPython) through 3.7.12, 3.8.x through 3.8.12, 3.9.x through 3.9.10, and 3.10.x through 3.10.2.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-26488"
    },
    {
      "cve": "CVE-2022-27774",
      "cwe": {
        "id": "CWE-522",
        "name": "Insufficiently Protected Credentials"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with authentication could leak credentials to other services that exist on different protocols or port numbers.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:R/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-27774"
    },
    {
      "cve": "CVE-2022-27775",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An information disclosure vulnerability exists in curl 7.65.0 to 7.82.0 are vulnerable that by using an IPv6 address that was in the connection pool but with a different zone id it could reuse a connection instead.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-27775"
    },
    {
      "cve": "CVE-2022-27776",
      "cwe": {
        "id": "CWE-522",
        "name": "Insufficiently Protected Credentials"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or cookie header data on HTTP redirects to the same host but another port number.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-27776"
    },
    {
      "cve": "CVE-2022-27778",
      "cwe": {
        "id": "CWE-706",
        "name": "Use of Incorrectly-Resolved Name or Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use of incorrectly resolved name vulnerability fixed in 7.83.1 might remove the wrong file when `--no-clobber` is used together with `--remove-on-error`.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-27778"
    },
    {
      "cve": "CVE-2022-27779",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl wrongly allows cookies to be set for Top Level Domains (TLDs) if thehost name is provided with a trailing dot.curl can be told to receive and send cookies. curl\u0027s \"cookie engine\" can bebuilt with or without [Public Suffix List](https://publicsuffix.org/)awareness. If PSL support not provided, a more rudimentary check exists to atleast prevent cookies from being set on TLDs. This check was broken if thehost name in the URL uses a trailing dot.This can allow arbitrary sites to set cookies that then would get sent to adifferent and unrelated site or domain.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-27779"
    },
    {
      "cve": "CVE-2022-27780",
      "cwe": {
        "id": "CWE-918",
        "name": "Server-Side Request Forgery (SSRF)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The curl URL parser wrongly accepts percent-encoded URL separators like \u0027/\u0027when decoding the host name part of a URL, making it a *different* URL usingthe wrong host name when it is later retrieved.For example, a URL like `http://example.com%2F127.0.0.1/`, would be allowed bythe parser and get transposed into `http://example.com/127.0.0.1/`. This flawcan be used to circumvent filters, checks and more.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-27780"
    },
    {
      "cve": "CVE-2022-27781",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl provides the `CURLOPT_CERTINFO` option to allow applications torequest details to be returned about a server\u0027s certificate chain.Due to an erroneous function, a malicious server could make libcurl built withNSS get stuck in a never-ending busy-loop when trying to retrieve thatinformation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-27781"
    },
    {
      "cve": "CVE-2022-27782",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl would reuse a previously created connection even when a TLS or SSHrelated option had been changed that should have prohibited reuse.libcurl keeps previously used connections in a connection pool for subsequenttransfers to reuse if one of them matches the setup. However, several TLS andSSH settings were left out from the configuration match checks, making themmatch too easily.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-27782"
    },
    {
      "cve": "CVE-2022-27943",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libiberty/rust-demangle.c in GNU GCC 11.2 allows stack consumption in demangle_const, as demonstrated by nm-new.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-27943"
    },
    {
      "cve": "CVE-2022-28321",
      "cwe": {
        "id": "CWE-287",
        "name": "Improper Authentication"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The Linux-PAM package before 1.5.2-6.1 for openSUSE Tumbleweed allows authentication bypass for SSH logins. The pam_access.so module doesn\u0027t correctly restrict login if a user tries to connect from an IP address that is not resolvable via DNS. In such conditions, a user with denied access to a machine can still get access. NOTE: the relevance of this issue is largely limited to openSUSE Tumbleweed and openSUSE Factory; it does not affect Linux-PAM upstream.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-28321"
    },
    {
      "cve": "CVE-2022-29155",
      "cwe": {
        "id": "CWE-89",
        "name": "Improper Neutralization of Special Elements used in an SQL Command (\u0027SQL Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In OpenLDAP 2.x before 2.5.12 and 2.6.x before 2.6.2, a SQL injection vulnerability exists in the experimental back-sql backend to slapd, via a SQL statement within an LDAP query. This can occur during an LDAP search operation when the search filter is processed, due to a lack of proper escaping.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-29155"
    },
    {
      "cve": "CVE-2022-29824",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libxml2 before 2.9.14, several buffer handling functions in buf.c (xmlBuf*) and tree.c (xmlBuffer*) don\u0027t check for integer overflows. This can result in out-of-bounds memory writes. Exploitation requires a victim to open a crafted, multi-gigabyte XML file. Other software using libxml2\u0027s buffer functions, for example libxslt through 1.1.35, is affected as well.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-29824"
    },
    {
      "cve": "CVE-2022-30115",
      "cwe": {
        "id": "CWE-319",
        "name": "Cleartext Transmission of Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Using its HSTS support, curl can be instructed to use HTTPS directly insteadof using an insecure clear-text HTTP step even when HTTP is provided in theURL. This mechanism could be bypassed if the host name in the given URL used atrailing dot while not using one when it built the HSTS cache. Or the otherway around - by having the trailing dot in the HSTS cache and *not* using thetrailing dot in the URL.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-30115"
    },
    {
      "cve": "CVE-2022-32205",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A malicious server can serve excessive amounts of \"Set-Cookie:\" headers in a HTTP response to curl and curl \u003c 7.84.0 stores all of them. A sufficiently large amount of (big) cookies make subsequent HTTP requests to this, or other servers to which the cookies match, create requests that become larger than the threshold that curl uses internally to avoid sending crazy large requests (1048576 bytes) and instead returns an error.This denial state might remain for as long as the same cookies are kept, match and haven\u0027t expired. Due to cookie matching rules, a server on \"foo.example.com\" can set cookies that also would match for \"bar.example.com\", making it it possible for a \"sister server\" to effectively cause a denial of service for a sibling site on the same second level domain using this method.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-32205"
    },
    {
      "cve": "CVE-2022-32206",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl \u003c 7.84.0 supports \"chained\" HTTP compression algorithms, meaning that a serverresponse can be compressed multiple times and potentially with different algorithms. The number of acceptable \"links\" in this \"decompression chain\" was unbounded, allowing a malicious server to insert a virtually unlimited number of compression steps.The use of such a decompression chain could result in a \"malloc bomb\", makingcurl end up spending enormous amounts of allocated heap memory, or trying toand returning out of memory errors.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-32206"
    },
    {
      "cve": "CVE-2022-32207",
      "cwe": {
        "id": "CWE-276",
        "name": "Incorrect Default Permissions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl \u003c 7.84.0 saves cookies, alt-svc and hsts data to local files, it makes the operation atomic by finalizing the operation with a rename from a temporary name to the final target file name.In that rename operation, it might accidentally *widen* the permissions for the target file, leaving the updated file accessible to more users than intended.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-32207"
    },
    {
      "cve": "CVE-2022-32208",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl \u003c 7.84.0 does FTP transfers secured by krb5, it handles message verification failures wrongly. This flaw makes it possible for a Man-In-The-Middle attack to go unnoticed and even allows it to inject data to the client.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-32208"
    },
    {
      "cve": "CVE-2022-32221",
      "cwe": {
        "id": "CWE-440",
        "name": "Expected Behavior Violation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When doing HTTP(S) transfers, libcurl might erroneously use the read callback (`CURLOPT_READFUNCTION`) to ask for data to send, even when the `CURLOPT_POSTFIELDS` option has been set, if the same handle previously was used to issue a `PUT` request which used that callback. This flaw may surprise the application and cause it to misbehave and either send off the wrong data or use memory after free or similar in the subsequent `POST` request. The problem exists in the logic for a reused handle when it is changed from a PUT to a POST.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.2,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-32221"
    },
    {
      "cve": "CVE-2022-35252",
      "cwe": {
        "id": "CWE-1286",
        "name": "Improper Validation of Syntactic Correctness of Input"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl is used to retrieve and parse cookies from a HTTP(S) server, itaccepts cookies using control codes that when later are sent back to a HTTPserver might make the server return 400 responses. Effectively allowing a\"sister site\" to deny service to all siblings.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-35252"
    },
    {
      "cve": "CVE-2022-35260",
      "cwe": {
        "id": "CWE-121",
        "name": "Stack-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl can be told to parse a `.netrc` file for credentials. If that file endsin a line with 4095 consecutive non-white space letters and no newline, curlwould first read past the end of the stack-based buffer, and if the readworks, write a zero byte beyond its boundary.This will in most cases cause a segfault or similar, but circumstances might also cause different outcomes.If a malicious user can provide a custom netrc file to an application or otherwise affect its contents, this flaw could be used as denial-of-service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.6,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-35260"
    },
    {
      "cve": "CVE-2022-35737",
      "cwe": {
        "id": "CWE-129",
        "name": "Improper Validation of Array Index"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite 1.0.12 through 3.39.x before 3.39.2 sometimes allows an array-bounds overflow if billions of bytes are used in a string argument to a C API.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-35737"
    },
    {
      "cve": "CVE-2022-37434",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "zlib through 1.2.12 has a heap-based buffer over-read or buffer overflow in inflate in inflate.c via a large gzip header extra field. NOTE: only applications that call inflateGetHeader are affected. Some common applications bundle the affected zlib source code but may be unable to call inflateGetHeader (e.g., see the nodejs/node reference).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-37434"
    },
    {
      "cve": "CVE-2022-37454",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The Keccak XKCP SHA-3 reference implementation before fdc6fef has an integer overflow and resultant buffer overflow that allows attackers to execute arbitrary code or eliminate expected cryptographic properties. This occurs in the sponge function interface.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-37454"
    },
    {
      "cve": "CVE-2022-40303",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.10.3. When parsing a multi-gigabyte XML document with the XML_PARSE_HUGE parser option enabled, several integer counters can overflow. This results in an attempt to access an array at a negative 2GB offset, typically leading to a segmentation fault.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-40303"
    },
    {
      "cve": "CVE-2022-40304",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.10.3. Certain invalid XML entity definitions can corrupt a hash table key, potentially leading to subsequent logic errors. In one case, a double-free can be provoked.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-40304"
    },
    {
      "cve": "CVE-2022-40674",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libexpat before 2.4.9 has a use-after-free in the doContent function in xmlparse.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-40674"
    },
    {
      "cve": "CVE-2022-42898",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "PAC parsing in MIT Kerberos 5 (aka krb5) before 1.19.4 and 1.20.x before 1.20.1 has integer overflows that may lead to remote code execution (in KDC, kadmind, or a GSS or Kerberos application server) on 32-bit platforms (which have a resultant heap-based buffer overflow), and cause a denial of service on other platforms. This occurs in krb5_pac_parse in lib/krb5/krb/pac.c. Heimdal before 7.7.1 has \"a similar bug.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-42898"
    },
    {
      "cve": "CVE-2022-42915",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl before 7.86.0 has a double free. If curl is told to use an HTTP proxy for a transfer with a non-HTTP(S) URL, it sets up the connection to the remote server by issuing a CONNECT request to the proxy, and then tunnels the rest of the protocol through. An HTTP proxy might refuse this request (HTTP proxies often only allow outgoing connections to specific port numbers, like 443 for HTTPS) and instead return a non-200 status code to the client. Due to flaws in the error/cleanup handling, this could trigger a double free in curl if one of the following schemes were used in the URL for the transfer: dict, gopher, gophers, ldap, ldaps, rtmp, rtmps, or telnet. The earliest affected version is 7.77.0.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-42915"
    },
    {
      "cve": "CVE-2022-42916",
      "cwe": {
        "id": "CWE-319",
        "name": "Cleartext Transmission of Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In curl before 7.86.0, the HSTS check could be bypassed to trick it into staying with HTTP. Using its HSTS support, curl can be instructed to use HTTPS directly (instead of using an insecure cleartext HTTP step) even when HTTP is provided in the URL. This mechanism could be bypassed if the host name in the given URL uses IDN characters that get replaced with ASCII counterparts as part of the IDN conversion, e.g., using the character UTF-8 U+3002 (IDEOGRAPHIC FULL STOP) instead of the common ASCII full stop of U+002E (.). The earliest affected version is 7.77.0 2021-05-26.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-42916"
    },
    {
      "cve": "CVE-2022-43551",
      "cwe": {
        "id": "CWE-319",
        "name": "Cleartext Transmission of Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability exists in curl \u003c7.87.0 HSTS check that could be bypassed to trick it to keep using HTTP. Using its HSTS support, curl can be instructed to use HTTPS instead of using an insecure clear-text HTTP step even when HTTP is provided in the URL. However, the HSTS mechanism could be bypassed if the host name in the given URL first uses IDN characters that get replaced to ASCII counterparts as part of the IDN conversion. Like using the character UTF-8 U+3002 (IDEOGRAPHIC FULL STOP) instead of the common ASCII full stop U+002E (.). Then in a subsequent request, it does not detect the HSTS state and makes a clear text transfer. Because it would store the info IDN encoded but look for it IDN decoded.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-43551"
    },
    {
      "cve": "CVE-2022-43552",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl can be asked to tunnel virtually all protocols it supports through an HTTP proxy. HTTP proxies can (and often do) deny such tunnel operations using an appropriate HTTP error response code. When getting denied to tunnel the specific protocols SMB or TELNET, curl would use a heap-allocated struct after it had been freed, in its transfer shutdown code path.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-43552"
    },
    {
      "cve": "CVE-2022-43680",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libexpat through 2.4.9, there is a use-after free caused by overeager destruction of a shared DTD in XML_ExternalEntityParserCreate in out-of-memory situations.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-43680"
    },
    {
      "cve": "CVE-2022-45061",
      "cwe": {
        "id": "CWE-407",
        "name": "Inefficient Algorithmic Complexity"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in Python before 3.11.1. An unnecessary quadratic algorithm exists in one path when processing some inputs to the IDNA (RFC 3490) decoder, such that a crafted, unreasonably long name being presented to the decoder could lead to a CPU denial of service. Hostnames are often supplied by remote servers that could be controlled by a malicious actor; in such a scenario, they could trigger excessive CPU consumption on the client attempting to make use of an attacker-supplied supposed hostname. For example, the attack payload could be placed in the Location header of an HTTP response with status code 302. A fix is planned in 3.11.1, 3.10.9, 3.9.16, 3.8.16, and 3.7.16.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-45061"
    },
    {
      "cve": "CVE-2022-45873",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "systemd 250 and 251 allows local users to achieve a systemd-coredump deadlock by triggering a crash that has a long backtrace. This occurs in parse_elf_object in shared/elf-util.c. The exploitation methodology is to crash a binary calling the same function recursively, and put it in a deeply nested directory to make its backtrace large enough to cause the deadlock. This must be done 16 times when MaxConnections=16 is set for the systemd/units/systemd-coredump.socket file.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-45873"
    },
    {
      "cve": "CVE-2022-46908",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite through 3.40.0, when relying on --safe for execution of an untrusted CLI script, does not properly implement the azProhibitedFunctions protection mechanism, and instead allows UDF functions such as WRITEFILE.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.3,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-46908"
    },
    {
      "cve": "CVE-2022-48303",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU Tar through 1.34 has a one-byte out-of-bounds read that results in use of uninitialized memory for a conditional jump. Exploitation to change the flow of control has not been demonstrated. The issue occurs in from_header in list.c via a V7 archive in which mtime has approximately 11 whitespace characters.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-48303"
    },
    {
      "cve": "CVE-2022-48522",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Perl 5.34.0, function S_find_uninit_var in sv.c has a stack-based crash that can lead to remote code execution or local privilege escalation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-48522"
    },
    {
      "cve": "CVE-2022-48560",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free exists in Python through 3.9 via heappushpop in heapq.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-48560"
    },
    {
      "cve": "CVE-2023-0215",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The public API function BIO_new_NDEF is a helper function used for streaming ASN.1 data via a BIO. It is primarily used internally to OpenSSL to support the SMIME, CMS and PKCS7 streaming capabilities, but may also be called directly by end user applications. The function receives a BIO from the caller, prepends a new BIO_f_asn1 filter BIO onto the front of it to form a BIO chain, and then returns the new head of the BIO chain to the caller. Under certain conditions, for example if a CMS recipient public key is invalid, the new filter BIO is freed and the function returns a NULL result indicating a failure. However, in this case, the BIO chain is not properly cleaned up and the BIO passed by the caller still retains internal pointers to the previously freed filter BIO. If the caller then goes on to call BIO_pop() on the BIO then a use-after-free will occur. This will most likely result in a crash. This scenario occurs directly in the internal function B64_write_ASN1() which may cause BIO_new_NDEF() to be called and will subsequently call BIO_pop() on the BIO. This internal function is in turn called by the public API functions PEM_write_bio_ASN1_stream, PEM_write_bio_CMS_stream, PEM_write_bio_PKCS7_stream, SMIME_write_ASN1, SMIME_write_CMS and SMIME_write_PKCS7. Other public API functions that may be impacted by this include i2d_ASN1_bio_stream, BIO_new_CMS, BIO_new_PKCS7, i2d_CMS_bio_stream and i2d_PKCS7_bio_stream. The OpenSSL cms and smime command line applications are similarly affected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-0215"
    },
    {
      "cve": "CVE-2023-0286",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a type confusion vulnerability relating to X.400 address processing inside an X.509 GeneralName. X.400 addresses were parsed as an ASN1_STRING but the public structure definition for GENERAL_NAME incorrectly specified the type of the x400Address field as ASN1_TYPE. This field is subsequently interpreted by the OpenSSL function GENERAL_NAME_cmp as an ASN1_TYPE rather than an ASN1_STRING. When CRL checking is enabled (i.e. the application sets the X509_V_FLAG_CRL_CHECK flag), this vulnerability may allow an attacker to pass arbitrary pointers to a memcmp call, enabling them to read memory contents or enact a denial of service. In most cases, the attack requires the attacker to provide both the certificate chain and CRL, neither of which need to have a valid signature. If the attacker only controls one of these inputs, the other input must already contain an X.400 address as a CRL distribution point, which is uncommon. As such, this vulnerability is most likely to only affect applications which have implemented their own functionality for retrieving CRLs over a network.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-0286"
    },
    {
      "cve": "CVE-2023-0361",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A timing side-channel in the handling of RSA ClientKeyExchange messages was discovered in GnuTLS. This side-channel can be sufficient to recover the key encrypted in the RSA ciphertext across a network in a Bleichenbacher style attack. To achieve a successful decryption the attacker would need to send a large amount of specially crafted messages to the vulnerable server. By recovering the secret from the ClientKeyExchange message, the attacker would be able to decrypt the application data exchanged over that connection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-0361"
    },
    {
      "cve": "CVE-2023-0464",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A security vulnerability has been identified in all supported versions of OpenSSL related to the verification of X.509 certificate chains that include policy constraints. Attackers may be able to exploit this vulnerability by creating a malicious certificate chain that triggers exponential use of computational resources, leading to a denial-of-service (DoS) attack on affected systems.\r\n\r\nPolicy processing is disabled by default but can be enabled by passing the `-policy` argument to the command line utilities or by calling the `X509_VERIFY_PARAM_set1_policies()` function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-0464"
    },
    {
      "cve": "CVE-2023-0465",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Applications that use a non-default option when verifying certificates may be\r\nvulnerable to an attack from a malicious CA to circumvent certain checks.\r\n\r\nInvalid certificate policies in leaf certificates are silently ignored by\r\nOpenSSL and other certificate policy checks are skipped for that certificate.\r\nA malicious CA could use this to deliberately assert invalid certificate policies\r\nin order to circumvent policy checking on the certificate altogether.\r\n\r\nPolicy processing is disabled by default but can be enabled by passing\r\nthe `-policy` argument to the command line utilities or by calling the\r\n`X509_VERIFY_PARAM_set1_policies()` function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-0465"
    },
    {
      "cve": "CVE-2023-0466",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The function X509_VERIFY_PARAM_add0_policy() is documented to\nimplicitly enable the certificate policy check when doing certificate\nverification. However the implementation of the function does not\nenable the check which allows certificates with invalid or incorrect\npolicies to pass the certificate verification.\n\nAs suddenly enabling the policy check could break existing deployments it was\ndecided to keep the existing behavior of the X509_VERIFY_PARAM_add0_policy()\nfunction.\n\nInstead the applications that require OpenSSL to perform certificate\npolicy check need to use X509_VERIFY_PARAM_set1_policies() or explicitly\nenable the policy check by calling X509_VERIFY_PARAM_set_flags() with\nthe X509_V_FLAG_POLICY_CHECK flag argument.\n\nCertificate policy checks are disabled by default in OpenSSL and are not\ncommonly used by applications.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-0466"
    },
    {
      "cve": "CVE-2023-0687",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in GNU C Library 2.38. It has been declared as critical. This vulnerability affects the function __monstartup of the file gmon.c of the component Call Graph Monitor. The manipulation leads to buffer overflow. It is recommended to apply a patch to fix this issue. VDB-220246 is the identifier assigned to this vulnerability. NOTE: The real existence of this vulnerability is still doubted at the moment. The inputs that induce this vulnerability are basically addresses of the running application that is built with gmon enabled. It\u0027s basically trusted input or input that needs an actual security flaw to be compromised or controlled.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.6,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:A/AC:H/PR:L/UI:N/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-0687"
    },
    {
      "cve": "CVE-2023-1077",
      "cwe": {
        "id": "CWE-843",
        "name": "Access of Resource Using Incompatible Type (\u0027Type Confusion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, pick_next_rt_entity() may return a type confused entry, not detected by the BUG_ON condition, as the confused entry will not be NULL, but list_head.The buggy error condition would lead to a type confused entry with the list head,which would then be used as a type confused sched_rt_entity,causing memory corruption.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-1077"
    },
    {
      "cve": "CVE-2023-1206",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A hash collision flaw was found in the IPv6 connection lookup table in the Linux kernel\u2019s IPv6 functionality when a user makes a new kind of SYN flood attack. A user located in the local network or with a high bandwidth connection can increase the CPU usage of the server that accepts IPV6 connections up to 95%.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-1206"
    },
    {
      "cve": "CVE-2023-2650",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Processing some specially crafted ASN.1 object identifiers or data containing them may be very slow. Impact summary: Applications that use OBJ_obj2txt() directly, or use any of the OpenSSL subsystems OCSP, PKCS7/SMIME, CMS, CMP/CRMF or TS with no message size limit may experience notable to very long delays when processing those messages, which may lead to a Denial of Service. An OBJECT IDENTIFIER is composed of a series of numbers - sub-identifiers - most of which have no size limit. OBJ_obj2txt() may be used to translate an ASN.1 OBJECT IDENTIFIER given in DER encoding form (using the OpenSSL type ASN1_OBJECT) to its canonical numeric text form, which are the sub-identifiers of the OBJECT IDENTIFIER in decimal form, separated by periods. When one of the sub-identifiers in the OBJECT IDENTIFIER is very large (these are sizes that are seen as absurdly large, taking up tens or hundreds of KiBs), the translation to a decimal number in text may take a very long time. The time complexity is O(square(n)) with \u0027n\u0027 being the size of the sub-identifiers in bytes (*). With OpenSSL 3.0, support to fetch cryptographic algorithms using names / identifiers in string form was introduced. This includes using OBJECT IDENTIFIERs in canonical numeric text form as identifiers for fetching algorithms. Such OBJECT IDENTIFIERs may be received through the ASN.1 structure AlgorithmIdentifier, which is commonly used in multiple protocols to specify what cryptographic algorithm should be used to sign or verify, encrypt or decrypt, or digest passed data. Applications that call OBJ_obj2txt() directly with untrusted data are affected, with any version of OpenSSL. If the use is for the mere purpose of display, the severity is considered low. In OpenSSL 3.0 and newer, this affects the subsystems OCSP, PKCS7/SMIME, CMS, CMP/CRMF or TS. It also impacts anything that processes X.509 certificates, including simple things like verifying its signature. The impact on TLS is relatively low, because all versions of OpenSSL have a 100KiB limit on the peer\u0027s certificate chain. Additionally, this only impacts clients, or servers that have explicitly enabled client authentication. In OpenSSL 1.1.1 and 1.0.2, this only affects displaying diverse objects, such as X.509 certificates. This is assumed to not happen in such a way that it would cause a Denial of Service, so these versions are considered not affected by this issue in such a way that it would be cause for concern, and the severity is therefore considered low.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-2650"
    },
    {
      "cve": "CVE-2023-2953",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in openldap. This security flaw causes a null pointer dereference in ber_memalloc_x() function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-2953"
    },
    {
      "cve": "CVE-2023-3212",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer dereference issue was found in the gfs2 file system in the Linux kernel. It occurs on corrupt gfs2 file systems when the evict code tries to reference the journal descriptor structure after it has been freed and set to NULL. A privileged local user could use this flaw to cause a kernel panic.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-3212"
    },
    {
      "cve": "CVE-2023-3446",
      "cwe": {
        "id": "CWE-1333",
        "name": "Inefficient Regular Expression Complexity"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. One of those checks confirms that the modulus (\u0027p\u0027 parameter) is not too large. Trying to use a very large modulus is slow and OpenSSL will not normally use a modulus which is over 10,000 bits in length. However the DH_check() function checks numerous aspects of the key or parameters that have been supplied. Some of those checks use the supplied modulus value even if it has already been found to be too large. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulernable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the \u0027-check\u0027 option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-3446"
    },
    {
      "cve": "CVE-2023-3609",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s net/sched: cls_u32 component can be exploited to achieve local privilege escalation.\r\n\r\nIf tcf_change_indev() fails, u32_set_parms() will immediately return an error after incrementing or decrementing the reference counter in tcf_bind_filter(). If an attacker can control the reference counter and set it to zero, they can cause the reference to be freed, leading to a use-after-free vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-3609"
    },
    {
      "cve": "CVE-2023-3611",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds write vulnerability in the Linux kernel\u0027s net/sched: sch_qfq component can be exploited to achieve local privilege escalation.\r\n\r\nThe qfq_change_agg() function in net/sched/sch_qfq.c allows an out-of-bounds write because lmax is updated according to packet sizes without bounds checks.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-3611"
    },
    {
      "cve": "CVE-2023-3772",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel\u0027s IP framework for transforming packets (XFRM subsystem). This issue may allow a malicious user with CAP_NET_ADMIN privileges to directly dereference a NULL pointer in xfrm_update_ae_params(), leading to a possible kernel crash and denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-3772"
    },
    {
      "cve": "CVE-2023-3817",
      "cwe": {
        "id": "CWE-834",
        "name": "Excessive Iteration"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. After fixing CVE-2023-3446 it was discovered that a large q parameter value can also trigger an overly long computation during some of these checks. A correct q value, if present, cannot be larger than the modulus p parameter, thus it is unnecessary to perform these checks if q is larger than p. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the \"-check\" option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-3817"
    },
    {
      "cve": "CVE-2023-4016",
      "cwe": {
        "id": "CWE-122",
        "name": "Heap-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Under some circumstances, this weakness allows a user who has access to run the \u201cps\u201d utility on a machine, the ability to write almost unlimited amounts of unfiltered data into the process heap.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 2.5,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-4016"
    },
    {
      "cve": "CVE-2023-4039",
      "cwe": {
        "id": "CWE-693",
        "name": "Protection Mechanism Failure"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A failure in the -fstack-protector feature in GCC-based toolchains \nthat target AArch64 allows an attacker to exploit an existing buffer \noverflow in dynamically-sized local variables in your application \nwithout this being detected. This stack-protector failure only applies \nto C99-style dynamically-sized local variables or those created using \nalloca(). The stack-protector operates as intended for statically-sized \nlocal variables.\n\nThe default behavior when the stack-protector \ndetects an overflow is to terminate your application, resulting in \ncontrolled loss of availability. An attacker who can exploit a buffer \noverflow without triggering the stack-protector might be able to change \nprogram flow control to cause an uncontrolled loss of availability or to\n go further and affect confidentiality or integrity.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.8,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-4039"
    },
    {
      "cve": "CVE-2023-4527",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in glibc. When the getaddrinfo function is called with the AF_UNSPEC address family and the system is configured with no-aaaa mode via /etc/resolv.conf, a DNS response via TCP larger than 2048 bytes can potentially disclose stack contents through the function returned address data, and may cause a crash.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-4527"
    },
    {
      "cve": "CVE-2023-4623",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s net/sched: sch_hfsc (HFSC qdisc traffic control) component can be exploited to achieve local privilege escalation.\n\nIf a class with a link-sharing curve (i.e. with the HFSC_FSC flag set) has a parent without a link-sharing curve, then init_vf() will call vttree_insert() on the parent, but vttree_remove() will be skipped in update_vf(). This leaves a dangling pointer that can cause a use-after-free.\n\nWe recommend upgrading past commit b3d26c5702c7d6c45456326e56d2ccf3f103e60f.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-4623"
    },
    {
      "cve": "CVE-2023-4806",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in glibc. In an extremely rare situation, the getaddrinfo function may access memory that has been freed, resulting in an application crash. This issue is only exploitable when a NSS module implements only the _nss_*_gethostbyname2_r and _nss_*_getcanonname_r hooks without implementing the _nss_*_gethostbyname3_r hook. The resolved name should return a large number of IPv6 and IPv4, and the call to the getaddrinfo function should have the AF_INET6 address family with AI_CANONNAME, AI_ALL and AI_V4MAPPED as flags.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-4806"
    },
    {
      "cve": "CVE-2023-4807",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: The POLY1305 MAC (message authentication code) implementation contains a bug that might corrupt the internal state of applications on the Windows 64 platform when running on newer X86_64 processors supporting the AVX512-IFMA instructions. Impact summary: If in an application that uses the OpenSSL library an attacker can influence whether the POLY1305 MAC algorithm is used, the application state might be corrupted with various application dependent consequences. The POLY1305 MAC (message authentication code) implementation in OpenSSL does not save the contents of non-volatile XMM registers on Windows 64 platform when calculating the MAC of data larger than 64 bytes. Before returning to the caller all the XMM registers are set to zero rather than restoring their previous content. The vulnerable code is used only on newer x86_64 processors supporting the AVX512-IFMA instructions. The consequences of this kind of internal application state corruption can be various - from no consequences, if the calling application does not depend on the contents of non-volatile XMM registers at all, to the worst consequences, where the attacker could get complete control of the application process. However given the contents of the registers are just zeroized so the attacker cannot put arbitrary values inside, the most likely consequence, if any, would be an incorrect result of some application dependent calculations or a crash leading to a denial of service. The POLY1305 MAC algorithm is most frequently used as part of the CHACHA20-POLY1305 AEAD (authenticated encryption with associated data) algorithm. The most common usage of this AEAD cipher is with TLS protocol versions 1.2 and 1.3 and a malicious client can influence whether this AEAD cipher is used by the server. This implies that server applications using OpenSSL can be potentially impacted. However we are currently not aware of any concrete application that would be affected by this issue therefore we consider this a Low severity security issue. As a workaround the AVX512-IFMA instructions support can be disabled at runtime by setting the environment variable OPENSSL_ia32cap: OPENSSL_ia32cap=:~0x200000 The FIPS provider is not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-4807"
    },
    {
      "cve": "CVE-2023-4813",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in glibc. In an uncommon situation, the gaih_inet function may use memory that has been freed, resulting in an application crash. This issue is only exploitable when the getaddrinfo function is called and the hosts database in /etc/nsswitch.conf is configured with SUCCESS=continue or SUCCESS=merge.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-4813"
    },
    {
      "cve": "CVE-2023-4911",
      "cwe": {
        "id": "CWE-121",
        "name": "Stack-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A buffer overflow was discovered in the GNU C Library\u0027s dynamic loader ld.so while processing the GLIBC_TUNABLES environment variable. This issue could allow a local attacker to use maliciously crafted GLIBC_TUNABLES environment variables when launching binaries with SUID permission to execute code with elevated privileges.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-4911"
    },
    {
      "cve": "CVE-2023-4921",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s net/sched: sch_qfq component can be exploited to achieve local privilege escalation.\n\nWhen the plug qdisc is used as a class of the qfq qdisc, sending network packets triggers use-after-free in qfq_dequeue() due to the incorrect .peek handler of sch_plug and lack of error checking in agg_dequeue().\n\nWe recommend upgrading past commit 8fc134fee27f2263988ae38920bc03da416b03d8.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-4921"
    },
    {
      "cve": "CVE-2023-5156",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the GNU C Library. A recent fix for CVE-2023-4806 introduced the potential for a memory leak, which may result in an application crash.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-5156"
    },
    {
      "cve": "CVE-2023-5678",
      "cwe": {
        "id": "CWE-754",
        "name": "Improper Check for Unusual or Exceptional Conditions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Generating excessively long X9.42 DH keys or checking excessively long X9.42 DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_generate_key() to generate an X9.42 DH key may experience long delays. Likewise, applications that use DH_check_pub_key(), DH_check_pub_key_ex() or EVP_PKEY_public_check() to check an X9.42 DH key or X9.42 DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. While DH_check() performs all the necessary checks (as of CVE-2023-3817), DH_check_pub_key() doesn\u0027t make any of these checks, and is therefore vulnerable for excessively large P and Q parameters. Likewise, while DH_generate_key() performs a check for an excessively large P, it doesn\u0027t check for an excessively large Q. An application that calls DH_generate_key() or DH_check_pub_key() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. DH_generate_key() and DH_check_pub_key() are also called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_pub_key_ex(), EVP_PKEY_public_check(), and EVP_PKEY_generate(). Also vulnerable are the OpenSSL pkey command line application when using the \"-pubcheck\" option, as well as the OpenSSL genpkey command line application. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-5678"
    },
    {
      "cve": "CVE-2023-5717",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A heap out-of-bounds write vulnerability in the Linux kernel\u0027s Linux Kernel Performance Events (perf) component can be exploited to achieve local privilege escalation.\r\n\r\nIf perf_read_group() is called while an event\u0027s sibling_list is smaller than its child\u0027s sibling_list, it can increment or write to memory locations outside of the allocated buffer.\r\n\r\nWe recommend upgrading past commit 32671e3799ca2e4590773fd0e63aaa4229e50c06.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-5717"
    },
    {
      "cve": "CVE-2023-5981",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found that the response times to malformed ciphertexts in RSA-PSK ClientKeyExchange differ from response times of ciphertexts with correct PKCS#1 v1.5 padding.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-5981"
    },
    {
      "cve": "CVE-2023-6121",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds read vulnerability was found in the NVMe-oF/TCP subsystem in the Linux kernel. This issue may allow a remote attacker to send a crafted TCP packet, triggering a heap-based buffer overflow that results in kmalloc data being printed and potentially leaked to the kernel ring buffer (dmesg).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-6121"
    },
    {
      "cve": "CVE-2023-6817",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s netfilter: nf_tables component can be exploited to achieve local privilege escalation.\n\nThe function nft_pipapo_walk did not skip inactive elements during set walk which could lead double deactivations of PIPAPO (Pile Packet Policies) elements, leading to use-after-free.\n\nWe recommend upgrading past commit 317eb9685095678f2c9f5a8189de698c5354316a.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-6817"
    },
    {
      "cve": "CVE-2023-6931",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A heap out-of-bounds write vulnerability in the Linux kernel\u0027s Performance Events system component can be exploited to achieve local privilege escalation.\n\nA perf_event\u0027s read_size can overflow, leading to an heap out-of-bounds increment or write in perf_read_group().\n\nWe recommend upgrading past commit 382c27f4ed28f803b1f1473ac2d8db0afc795a1b.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-6931"
    },
    {
      "cve": "CVE-2023-6932",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s ipv4: igmp component can be exploited to achieve local privilege escalation.\n\nA race condition can be exploited to cause a timer be mistakenly registered on a RCU read locked object which is freed by another thread.\n\nWe recommend upgrading past commit e2b706c691905fe78468c361aaabc719d0a496f1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-6932"
    },
    {
      "cve": "CVE-2023-23914",
      "cwe": {
        "id": "CWE-319",
        "name": "Cleartext Transmission of Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A cleartext transmission of sensitive information vulnerability exists in curl \u003cv7.88.0 that could cause HSTS functionality fail when multiple URLs are requested serially. Using its HSTS support, curl can be instructed to use HTTPS instead of usingan insecure clear-text HTTP step even when HTTP is provided in the URL. ThisHSTS mechanism would however surprisingly be ignored by subsequent transferswhen done on the same command line because the state would not be properlycarried on.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-23914"
    },
    {
      "cve": "CVE-2023-23915",
      "cwe": {
        "id": "CWE-319",
        "name": "Cleartext Transmission of Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A cleartext transmission of sensitive information vulnerability exists in curl \u003cv7.88.0 that could cause HSTS functionality to behave incorrectly when multiple URLs are requested in parallel. Using its HSTS support, curl can be instructed to use HTTPS instead of using an insecure clear-text HTTP step even when HTTP is provided in the URL. This HSTS mechanism would however surprisingly fail when multiple transfers are done in parallel as the HSTS cache file gets overwritten by the most recentlycompleted transfer. A later HTTP-only transfer to the earlier host name would then *not* get upgraded properly to HSTS.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-23915"
    },
    {
      "cve": "CVE-2023-23916",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An allocation of resources without limits or throttling vulnerability exists in curl \u003cv7.88.0 based on the \"chained\" HTTP compression algorithms, meaning that a server response can be compressed multiple times and potentially with differentalgorithms. The number of acceptable \"links\" in this \"decompression chain\" wascapped, but the cap was implemented on a per-header basis allowing a maliciousserver to insert a virtually unlimited number of compression steps simply byusing many headers. The use of such a decompression chain could result in a \"malloc bomb\", making curl end up spending enormous amounts of allocated heap memory, or trying to and returning out of memory errors.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-23916"
    },
    {
      "cve": "CVE-2023-24329",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue in the urllib.parse component of Python before 3.11.4 allows attackers to bypass blocklisting methods by supplying a URL that starts with blank characters.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-24329"
    },
    {
      "cve": "CVE-2023-25136",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "OpenSSH server (sshd) 9.1 introduced a double-free vulnerability during options.kex_algorithms handling. This is fixed in OpenSSH 9.2. The double free can be leveraged, by an unauthenticated remote attacker in the default configuration, to jump to any location in the sshd address space. One third-party report states \"remote code execution is theoretically possible.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-25136"
    },
    {
      "cve": "CVE-2023-25139",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "sprintf in the GNU C Library (glibc) 2.37 has a buffer overflow (out-of-bounds write) in some situations with a correct buffer size. This is unrelated to CWE-676. It may write beyond the bounds of the destination buffer when attempting to write a padded, thousands-separated string representation of a number, if the buffer is allocated the exact size required to represent that number as a string. For example, 1,234,567 (with padding to 13) overflows by two bytes.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-25139"
    },
    {
      "cve": "CVE-2023-26604",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "systemd before 247 does not adequately block local privilege escalation for some Sudo configurations, e.g., plausible sudoers files in which the \"systemctl status\" command may be executed. Specifically, systemd does not set LESSSECURE to 1, and thus other programs may be launched from the less program. This presents a substantial security risk when running systemctl from Sudo, because less executes as root when the terminal size is too small to show the complete systemctl output.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-26604"
    },
    {
      "cve": "CVE-2023-27371",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU libmicrohttpd before 0.9.76 allows remote DoS (Denial of Service) due to improper parsing of a multipart/form-data boundary in the postprocessor.c MHD_create_post_processor() method. This allows an attacker to remotely send a malicious HTTP POST packet that includes one or more \u0027\\0\u0027 bytes in a multipart/form-data boundary field, which - assuming a specific heap layout - will result in an out-of-bounds read and a crash in the find_boundary() function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AC:H/AV:N/A:H/C:N/I:N/PR:N/S:U/UI:N",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-27371"
    },
    {
      "cve": "CVE-2023-27533",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability in input validation exists in curl \u003c8.0 during communication using the TELNET protocol may allow an attacker to pass on maliciously crafted user name and \"telnet options\" during server negotiation. The lack of proper input scrubbing allows an attacker to send content or perform option negotiation without the application\u0027s intent. This vulnerability could be exploited if an application allows user input, thereby enabling attackers to execute arbitrary code on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-27533"
    },
    {
      "cve": "CVE-2023-27534",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A path traversal vulnerability exists in curl \u003c8.0.0 SFTP implementation causes the tilde (~) character to be wrongly replaced when used as a prefix in the first path element, in addition to its intended use as the first element to indicate a path relative to the user\u0027s home directory. Attackers can exploit this flaw to bypass filtering or execute arbitrary code by crafting a path like /~2/foo while accessing a server with a specific user.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-27534"
    },
    {
      "cve": "CVE-2023-27535",
      "cwe": {
        "id": "CWE-287",
        "name": "Improper Authentication"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An authentication bypass vulnerability exists in libcurl \u003c8.0.0 in the FTP connection reuse feature that can result in wrong credentials being used during subsequent transfers. Previously created connections are kept in a connection pool for reuse if they match the current setup. However, certain FTP settings such as CURLOPT_FTP_ACCOUNT, CURLOPT_FTP_ALTERNATIVE_TO_USER, CURLOPT_FTP_SSL_CCC, and CURLOPT_USE_SSL were not included in the configuration match checks, causing them to match too easily. This could lead to libcurl using the wrong credentials when performing a transfer, potentially allowing unauthorized access to sensitive information.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-27535"
    },
    {
      "cve": "CVE-2023-27536",
      "cwe": {
        "id": "CWE-287",
        "name": "Improper Authentication"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An authentication bypass vulnerability exists libcurl \u003c8.0.0 in the connection reuse feature which can reuse previously established connections with incorrect user permissions due to a failure to check for changes in the CURLOPT_GSSAPI_DELEGATION option. This vulnerability affects krb5/kerberos/negotiate/GSSAPI transfers and could potentially result in unauthorized access to sensitive information. The safest option is to not reuse connections if the CURLOPT_GSSAPI_DELEGATION option has been changed.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-27536"
    },
    {
      "cve": "CVE-2023-27537",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A double free vulnerability exists in libcurl \u003c8.0.0 when sharing HSTS data between separate \"handles\". This sharing was introduced without considerations for do this sharing across separate threads but there was no indication of this fact in the documentation. Due to missing mutexes or thread locks, two threads sharing the same HSTS data could end up doing a double-free or use-after-free.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-27537"
    },
    {
      "cve": "CVE-2023-27538",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl would reuse a previously created connection even when an SSH related option had been changed that should have prohibited reuse. libcurl keeps previously used connections in a connection pool for subsequent transfers to reuse if one of them matches the setup. However, two SSH settings were left out from the configuration match checks, making them match too easily.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-27538"
    },
    {
      "cve": "CVE-2023-28484",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libxml2 before 2.10.4, parsing of certain invalid XSD schemas can lead to a NULL pointer dereference and subsequently a segfault. This occurs in xmlSchemaFixupComplexType in xmlschemas.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-28484"
    },
    {
      "cve": "CVE-2023-28531",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ssh-add in OpenSSH before 9.3 adds smartcard keys to ssh-agent without the intended per-hop destination constraints. The earliest affected version is 8.9.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-28531"
    },
    {
      "cve": "CVE-2023-29383",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Shadow 4.13, it is possible to inject control characters into fields provided to the SUID program chfn (change finger). Although it is not possible to exploit this directly (e.g., adding a new user fails because \\n is in the block list), it is possible to misrepresent the /etc/passwd file when viewed. Use of \\r manipulations and Unicode characters to work around blocking of the : character make it possible to give the impression that a new user has been added. In other words, an adversary may be able to convince a system administrator to take the system offline (an indirect, social-engineered denial of service) by demonstrating that \"cat /etc/passwd\" shows a rogue user account.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-29383"
    },
    {
      "cve": "CVE-2023-29469",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.10.4. When hashing empty dict strings in a crafted XML document, xmlDictComputeFastKey in dict.c can produce non-deterministic values, leading to various logic and memory errors, such as a double free. This behavior occurs because there is an attempt to use the first byte of an empty string, and any value is possible (not solely the \u0027\\0\u0027 value).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-29469"
    },
    {
      "cve": "CVE-2023-29491",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ncurses before 6.4 20230408, when used by a setuid application, allows local users to trigger security-relevant memory corruption via malformed data in a terminfo database file that is found in $HOME/.terminfo or reached via the TERMINFO or TERM environment variable.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-29491"
    },
    {
      "cve": "CVE-2023-29499",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in GLib. GVariant deserialization fails to validate that the input conforms to the expected format, leading to denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-29499"
    },
    {
      "cve": "CVE-2023-31085",
      "cwe": {
        "id": "CWE-369",
        "name": "Divide By Zero"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in drivers/mtd/ubi/cdev.c in the Linux kernel 6.2. There is a divide-by-zero error in do_div(sz,mtd-\u003eerasesize), used indirectly by ctrl_cdev_ioctl, when mtd-\u003eerasesize is 0.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-31085"
    },
    {
      "cve": "CVE-2023-32611",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in GLib. GVariant deserialization is vulnerable to a slowdown issue where a crafted GVariant can cause excessive processing, leading to denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-32611"
    },
    {
      "cve": "CVE-2023-32636",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in glib, where the gvariant deserialization code is vulnerable to a denial of service introduced by additional input validation added to resolve CVE-2023-29499. The offset table validation may be very slow. This bug does not affect any released version of glib but does affect glib distributors who followed the guidance of glib developers to backport the initial fix for CVE-2023-29499.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-32636"
    },
    {
      "cve": "CVE-2023-32643",
      "cwe": {
        "id": "CWE-122",
        "name": "Heap-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in GLib. The GVariant deserialization code is vulnerable to a heap buffer overflow introduced by the fix for CVE-2023-32665. This bug does not affect any released version of GLib, but does affect GLib distributors who followed the guidance of GLib developers to backport the initial fix for CVE-2023-32665.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-32643"
    },
    {
      "cve": "CVE-2023-32665",
      "cwe": {
        "id": "CWE-502",
        "name": "Deserialization of Untrusted Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in GLib. GVariant deserialization is vulnerable to an exponential blowup issue where a crafted GVariant can cause excessive processing, leading to denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-32665"
    },
    {
      "cve": "CVE-2023-34319",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The fix for XSA-423 added logic to Linux\u0027es netback driver to deal with\na frontend splitting a packet in a way such that not all of the headers\nwould come in one piece.  Unfortunately the logic introduced there\ndidn\u0027t account for the extreme case of the entire packet being split\ninto as many pieces as permitted by the protocol, yet still being\nsmaller than the area that\u0027s specially dealt with to keep all (possible)\nheaders together.  Such an unusual packet would therefore trigger a\nbuffer overrun in the driver.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-34319"
    },
    {
      "cve": "CVE-2023-34969",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "D-Bus before 1.15.6 sometimes allows unprivileged users to crash dbus-daemon. If a privileged user with control over the dbus-daemon is using the org.freedesktop.DBus.Monitoring interface to monitor message bus traffic, then an unprivileged user with the ability to connect to the same dbus-daemon can cause a dbus-daemon crash under some circumstances via an unreplyable message. When done on the well-known system bus, this is a denial-of-service vulnerability. The fixed versions are 1.12.28, 1.14.8, and 1.15.6.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-34969"
    },
    {
      "cve": "CVE-2023-35001",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Linux Kernel nftables Out-Of-Bounds Read/Write Vulnerability; nft_byteorder poorly handled vm register contents when CAP_NET_ADMIN is in any user or network namespace",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-35001"
    },
    {
      "cve": "CVE-2023-35945",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Envoy is a cloud-native high-performance edge/middle/service proxy. Envoy\u2019s HTTP/2 codec may leak a header map and bookkeeping structures upon receiving `RST_STREAM` immediately followed by the `GOAWAY` frames from an upstream server. In nghttp2, cleanup of pending requests due to receipt of the `GOAWAY` frame skips de-allocation of the bookkeeping structure and pending compressed header. The error return [code path] is taken if connection is already marked for not sending more requests due to `GOAWAY` frame. The clean-up code is right after the return statement, causing memory leak. Denial of service through memory exhaustion. This vulnerability was patched in versions(s) 1.26.3, 1.25.8, 1.24.9, 1.23.11.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-35945"
    },
    {
      "cve": "CVE-2023-38408",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The PKCS#11 feature in ssh-agent in OpenSSH before 9.3p2 has an insufficiently trustworthy search path, leading to remote code execution if an agent is forwarded to an attacker-controlled system. (Code in /usr/lib is not necessarily safe for loading into ssh-agent.) NOTE: this issue exists because of an incomplete fix for CVE-2016-10009.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.7,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:R/S:C/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-38408"
    },
    {
      "cve": "CVE-2023-38545",
      "cwe": {
        "id": "CWE-122",
        "name": "Heap-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "This flaw makes curl overflow a heap based buffer in the SOCKS5 proxy handshake.\r\n\r\nWhen curl is asked to pass along the hostname to the SOCKS5 proxy to allow that to resolve the address instead of it getting done by curl itself, the maximum length that hostname can be is 255 bytes.\r\n\r\nIf the hostname is detected to be longer than 255 bytes, curl switches to local name resolving and instead passes on the resolved address only to the proxy. Due to a bug, the local variable that means \"let the host resolve the name\" could get the wrong value during a slow SOCKS5 handshake, and contrary to the intention, copy the too long hostname to the target buffer instead of copying just the resolved address there.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-38545"
    },
    {
      "cve": "CVE-2023-38546",
      "cwe": {
        "id": "CWE-73",
        "name": "External Control of File Name or Path"
      },
      "notes": [
        {
          "category": "summary",
          "text": "This flaw allows an attacker to insert cookies at will into a running program\r\nusing libcurl, if the specific series of conditions are met.\r\n\r\nlibcurl performs transfers. In its API, an application creates \"easy handles\"\r\nthat are the individual handles for single transfers.\r\n\r\nlibcurl provides a function call that duplicates en easy handle called\r\n[curl_easy_duphandle](https://curl.se/libcurl/c/curl_easy_duphandle.html).\r\n\r\nIf a transfer has cookies enabled when the handle is duplicated, the\r\ncookie-enable state is also cloned - but without cloning the actual\r\ncookies. If the source handle did not read any cookies from a specific file on\r\ndisk, the cloned version of the handle would instead store the file name as\r\n`none` (using the four ASCII letters, no quotes).\r\n\r\nSubsequent use of the cloned handle that does not explicitly set a source to\r\nload cookies from would then inadvertently load cookies from a file named\r\n`none` - if such a file exists and is readable in the current directory of the\r\nprogram using libcurl. And if using the correct file format of course.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-38546"
    },
    {
      "cve": "CVE-2023-39128",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU gdb (GDB) 13.0.50.20220805-git was discovered to contain a stack overflow via the function ada_decode at /gdb/ada-lang.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-39128"
    },
    {
      "cve": "CVE-2023-39189",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Netfilter subsystem in the Linux kernel. The nfnl_osf_add_callback function did not validate the user mode controlled opt_num field. This flaw allows a local privileged (CAP_NET_ADMIN) attacker to trigger an out-of-bounds read, leading to a crash or information disclosure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-39189"
    },
    {
      "cve": "CVE-2023-39192",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Netfilter subsystem in the Linux kernel. The xt_u32 module did not validate the fields in the xt_u32 structure. This flaw allows a local privileged attacker to trigger an out-of-bounds read by setting the size fields with a value beyond the array boundaries, leading to a crash or information disclosure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:C/C:H/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-39192"
    },
    {
      "cve": "CVE-2023-39193",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Netfilter subsystem in the Linux kernel. The sctp_mt_check did not validate the flag_count field. This flaw allows a local privileged (CAP_NET_ADMIN) attacker to trigger an out-of-bounds read, leading to a crash or information disclosure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-39193"
    },
    {
      "cve": "CVE-2023-39194",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the XFRM subsystem in the Linux kernel. The specific flaw exists within the processing of state filters, which can result in a read past the end of an allocated buffer. This flaw allows a local privileged (CAP_NET_ADMIN) attacker to trigger an out-of-bounds read, potentially leading to an information disclosure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.2,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:C/C:L/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-39194"
    },
    {
      "cve": "CVE-2023-39615",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Xmlsoft Libxml2 v2.11.0 was discovered to contain an out-of-bounds read via the xmlSAX2StartElement() function at /libxml2/SAX2.c. This vulnerability allows attackers to cause a Denial of Service (DoS) via supplying a crafted XML file. NOTE: the vendor\u0027s position is that the product does not support the legacy SAX1 interface with custom callbacks; there is a crash even without crafted input.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-39615"
    },
    {
      "cve": "CVE-2023-40283",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in l2cap_sock_release in net/bluetooth/l2cap_sock.c in the Linux kernel before 6.4.10. There is a use-after-free because the children of an sk are mishandled.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-40283"
    },
    {
      "cve": "CVE-2023-42754",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer dereference flaw was found in the Linux kernel ipv4 stack. The socket buffer (skb) was assumed to be associated with a device before calling __ip_options_compile, which is not always the case if the skb is re-routed by ipvs. This issue may allow a local user with CAP_NET_ADMIN privileges to crash the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-42754"
    },
    {
      "cve": "CVE-2023-42755",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the IPv4 Resource Reservation Protocol (RSVP) classifier in the Linux kernel. The xprt pointer may go beyond the linear part of the skb, leading to an out-of-bounds read in the `rsvp_classify` function. This issue may allow a local user to crash the system and cause a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-42755"
    },
    {
      "cve": "CVE-2023-44487",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The HTTP/2 protocol allows a denial of service (server resource consumption) because request cancellation can reset many streams quickly, as exploited in the wild in August through October 2023.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-44487"
    },
    {
      "cve": "CVE-2023-45322",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libxml2 through 2.11.5 has a use-after-free that can only occur after a certain memory allocation fails. This occurs in xmlUnlinkNode in tree.c. NOTE: the vendor\u0027s position is \"I don\u0027t think these issues are critical enough to warrant a CVE ID ... because an attacker typically can\u0027t control when memory allocations fail.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-45322"
    },
    {
      "cve": "CVE-2023-45853",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "MiniZip in zlib through 1.3 has an integer overflow and resultant heap-based buffer overflow in zipOpenNewFileInZip4_64 via a long filename, comment, or extra field. NOTE: MiniZip is not a supported part of the zlib product.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-45853"
    },
    {
      "cve": "CVE-2023-45871",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in drivers/net/ethernet/intel/igb/igb_main.c in the IGB driver in the Linux kernel before 6.5.3. A buffer size may not be adequate for frames larger than the MTU.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-45871"
    },
    {
      "cve": "CVE-2023-45898",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The Linux kernel before 6.5.4 has an es1 use-after-free in fs/ext4/extents_status.c, related to ext4_es_insert_extent.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-45898"
    },
    {
      "cve": "CVE-2023-45918",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ncurses 6.4-20230610 has a NULL pointer dereference in tgetstr in tinfo/lib_termcap.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-45918"
    },
    {
      "cve": "CVE-2023-46218",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "This flaw allows a malicious HTTP server to set \"super cookies\" in curl that are then passed back to more origins than what is otherwise allowed or possible. This allows a site to set cookies that then would get sent to different and unrelated sites and domains. It could do this by exploiting a mixed case flaw in curl\u0027s function that verifies a given cookie domain against the Public Suffix List (PSL). For example a cookie could be set with `domain=co.UK` when the URL used a lower case hostname `curl.co.uk`, even though `co.uk` is listed as a PSL domain.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-46218"
    },
    {
      "cve": "CVE-2023-46219",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When saving HSTS data to an excessively long file name, curl could end up removing all contents, making subsequent requests using that file unaware of the HSTS status they should otherwise use.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-46219"
    },
    {
      "cve": "CVE-2023-46862",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel through 6.5.9. During a race with SQ thread exit, an io_uring/fdinfo.c io_uring_show_fdinfo NULL pointer dereference can occur.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-46862"
    },
    {
      "cve": "CVE-2023-48795",
      "cwe": {
        "id": "CWE-222",
        "name": "Truncation of Security-relevant Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The SSH transport protocol with certain OpenSSH extensions, found in OpenSSH before 9.6 and other products, allows remote attackers to bypass integrity checks such that some packets are omitted (from the extension negotiation message), and a client and server may consequently end up with a connection for which some security features have been downgraded or disabled, aka a Terrapin attack. This occurs because the SSH Binary Packet Protocol (BPP), implemented by these extensions, mishandles the handshake phase and mishandles use of sequence numbers. For example, there is an effective attack against SSH\u0027s use of ChaCha20-Poly1305 (and CBC with Encrypt-then-MAC). The bypass occurs in chacha20-poly1305@openssh.com and (if CBC is used) the -etm@openssh.com MAC algorithms. This also affects Maverick Synergy Java SSH API before 3.1.0-SNAPSHOT, Dropbear through 2022.83, Ssh before 5.1.1 in Erlang/OTP, PuTTY before 0.80, AsyncSSH before 2.14.2, golang.org/x/crypto before 0.17.0, libssh before 0.10.6, libssh2 through 1.11.0, Thorn Tech SFTP Gateway before 3.4.6, Tera Term before 5.1, Paramiko before 3.4.0, jsch before 0.2.15, SFTPGo before 2.5.6, Netgate pfSense Plus through 23.09.1, Netgate pfSense CE through 2.7.2, HPN-SSH through 18.2.0, ProFTPD before 1.3.8b (and before1.3.9rc2), ORYX CycloneSSH before 2.3.4, NetSarang XShell 7 before Build 0144, CrushFTP before 10.6.0, ConnectBot SSH library before 2.2.22, Apache MINA sshd through 2.11.0, sshj through 0.37.0, TinySSH through 20230101, trilead-ssh2 6401, the net-ssh gem 7.2.0 for Ruby, the mscdex ssh2 module before 1.15.0 for Node.js, the thrussh library before 0.35.1 for Rust, and the Russh crate before 0.40.2 for Rust; and there could be effects on Bitvise SSH through 9.31.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-48795"
    },
    {
      "cve": "CVE-2023-52425",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libexpat through 2.5.0 allows a denial of service (resource consumption) because many full reparsings are required in the case of a large token for which multiple buffer fills are needed.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-52425"
    },
    {
      "cve": "CVE-2023-52426",
      "cwe": {
        "id": "CWE-776",
        "name": "Improper Restriction of Recursive Entity References in DTDs (\u0027XML Entity Expansion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libexpat through 2.5.0 allows recursive XML Entity Expansion if XML_DTD is undefined at compile time.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-52426"
    },
    {
      "cve": "CVE-2024-0584",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free issue was found in igmp_start_timer in net/ipv4/igmp.c in the network sub-component in the Linux Kernel. This flaw allows a local user to observe a refcnt use-after-free issue when receiving an igmp query packet, leading to a kernel information leak.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2024-0584"
    },
    {
      "cve": "CVE-2024-2004",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When a protocol selection parameter option disables all protocols without adding any then the default set of protocols would remain in the allowed set due to an error in the logic for removing protocols. The below command would perform a request to curl.se with a plaintext protocol which has been explicitly disabled.      curl --proto -all,-http http://curl.se  The flaw is only present if the set of selected protocols disables the entire set of available protocols, in itself a command with no practical use and therefore unlikely to be encountered in real situations. The curl security team has thus assessed this to be low severity bug.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2024-2004"
    },
    {
      "cve": "CVE-2024-2379",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl skips the certificate verification for a QUIC connection under certain conditions, when built to use wolfSSL. If told to use an unknown/bad cipher or curve, the error path accidentally skips the verification and returns OK, thus ignoring any certificate problems.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2024-2379"
    },
    {
      "cve": "CVE-2024-2398",
      "cwe": {
        "id": "CWE-772",
        "name": "Missing Release of Resource after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When an application tells libcurl it wants to allow HTTP/2 server push, and the amount of received headers for the push surpasses the maximum allowed limit (1000), libcurl aborts the server push. When aborting, libcurl inadvertently does not free all the previously allocated headers and instead leaks the memory.  Further, this error condition fails silently and is therefore not easily detected by an application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2024-2398"
    },
    {
      "cve": "CVE-2024-2466",
      "cwe": {
        "id": "CWE-297",
        "name": "Improper Validation of Certificate with Host Mismatch"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl did not check the server certificate of TLS connections done to a host specified as an IP address, when built to use mbedTLS.  libcurl would wrongly avoid using the set hostname function when the specified hostname was given as an IP address, therefore completely skipping the certificate check. This affects all uses of TLS protocols (HTTPS, FTPS, IMAPS, POPS3, SMTPS, etc).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2024-2466"
    },
    {
      "cve": "CVE-2024-2511",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Some non-default TLS server configurations can cause unbounded memory growth when processing TLSv1.3 sessions\r\nImpact summary: An attacker may exploit certain server configurations to trigger unbounded memory growth that would lead to a Denial of Service This problem can occur in TLSv1.3 if the non-default SSL_OP_NO_TICKET option is being used (but not if early_data support is also configured and the default anti-replay protection is in use). In this case, under certain conditions, the session cache can get into an incorrect state and it will fail to flush properly as it fills. The session cache will continue to grow in an unbounded manner. A malicious client could deliberately create the scenario for this failure to force a Denial of Service. It may also happen by accident in normal operation. This issue only affects TLS servers supporting TLSv1.3. It does not affect TLS clients. The FIPS modules in 3.2, 3.1 and 3.0 are not affected by this issue. OpenSSL 1.0.2 is also not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2024-2511"
    },
    {
      "cve": "CVE-2024-2961",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The iconv() function in the GNU C Library versions 2.39 and older may overflow the output buffer passed to it by up to 4 bytes when converting strings to the ISO-2022-CN-EXT character set, which may be used to crash an application or overwrite a neighbouring variable.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2024-2961"
    },
    {
      "cve": "CVE-2024-28085",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "wall in util-linux through 2.40, often installed with setgid tty permissions, allows escape sequences to be sent to other users\u0027 terminals through argv. (Specifically, escape sequences received from stdin are blocked, but escape sequences received from argv are not blocked.) There may be plausible scenarios where this leads to account takeover.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.0"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2024-28085"
    },
    {
      "cve": "CVE-2024-28182",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nghttp2 is an implementation of the Hypertext Transfer Protocol version 2 in C. The nghttp2 library prior to version 1.61.0 keeps reading the unbounded number of HTTP/2 CONTINUATION frames even after a stream is reset to keep HPACK context in sync.  This causes excessive CPU usage to decode HPACK stream. nghttp2 v1.61.0 mitigates this vulnerability by limiting the number of CONTINUATION frames it accepts per stream. There is no workaround for this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2024-28182"
    },
    {
      "cve": "CVE-2024-28757",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libexpat through 2.6.1 allows an XML Entity Expansion attack when there is isolated use of external parsers (created via XML_ExternalEntityParserCreate).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2024-28757"
    },
    {
      "cve": "CVE-2024-28834",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in GnuTLS. The Minerva attack is a cryptographic vulnerability that exploits deterministic behavior in systems like GnuTLS, leading to side-channel leaks. In specific scenarios, such as when using the GNUTLS_PRIVKEY_FLAG_REPRODUCIBLE flag, it can result in a noticeable step in nonce size from 513 to 512 bits, exposing a potential timing side-channel.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2024-28834"
    },
    {
      "cve": "CVE-2024-28835",
      "cwe": {
        "id": "CWE-248",
        "name": "Uncaught Exception"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw has been discovered in GnuTLS where an application crash can be induced when attempting to verify a specially crafted .pem bundle using the \"certtool --verify-chain\" command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.0,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2024-28835"
    },
    {
      "cve": "CVE-2024-33599",
      "cwe": {
        "id": "CWE-121",
        "name": "Stack-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nscd: Stack-based buffer overflow in netgroup cache\r\n\r\nIf the Name Service Cache Daemon\u0027s (nscd) fixed size cache is exhausted\r\nby client requests then a subsequent client request for netgroup data\r\nmay result in a stack-based buffer overflow.  This flaw was introduced\r\nin glibc 2.15 when the cache was added to nscd.\r\n\r\nThis vulnerability is only present in the nscd binary.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.6,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2024-33599"
    },
    {
      "cve": "CVE-2024-33600",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nscd: Null pointer crashes after notfound response\r\n\r\nIf the Name Service Cache Daemon\u0027s (nscd) cache fails to add a not-found\r\nnetgroup response to the cache, the client request can result in a null\r\npointer dereference.  This flaw was introduced in glibc 2.15 when the\r\ncache was added to nscd.\r\n\r\nThis vulnerability is only present in the nscd binary.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2024-33600"
    },
    {
      "cve": "CVE-2024-33601",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nscd: netgroup cache may terminate daemon on memory allocation failure\r\n\r\nThe Name Service Cache Daemon\u0027s (nscd) netgroup cache uses xmalloc or\r\nxrealloc and these functions may terminate the process due to a memory\r\nallocation failure resulting in a denial of service to the clients.  The\r\nflaw was introduced in glibc 2.15 when the cache was added to nscd.\r\n\r\nThis vulnerability is only present in the nscd binary.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.0,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2024-33601"
    },
    {
      "cve": "CVE-2024-33602",
      "cwe": {
        "id": "CWE-466",
        "name": "Return of Pointer Value Outside of Expected Range"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nscd: netgroup cache assumes NSS callback uses in-buffer strings\r\n\r\nThe Name Service Cache Daemon\u0027s (nscd) netgroup cache can corrupt memory\r\nwhen the NSS callback does not store all strings in the provided buffer.\r\nThe flaw was introduced in glibc 2.15 when the cache was added to nscd.\r\n\r\nThis vulnerability is only present in the nscd binary.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.0,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2024-33602"
    },
    {
      "cve": "CVE-2024-34459",
      "cwe": {
        "id": "CWE-126",
        "name": "Buffer Over-read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in xmllint (from libxml2) before 2.11.8 and 2.12.x before 2.12.7. Formatting error messages with xmllint --htmlout can result in a buffer over-read in xmlHTMLPrintFileContext in xmllint.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2024-34459"
    }
  ]
}

{
  "document": {
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Disclosure is not limited. (TLPv2: TLP:CLEAR)",
      "tlp": {
        "label": "WHITE"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the firmware version V3.1 for the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP (incl. SIPLUS variant).\n\nThese GNU/Linux vulnerabilities have been externally identified. Siemens is preparing fix versions and recommends specific countermeasures for products where fixes are not, or not yet available.\n\nNote: This SSA advises vulnerabilities for firmware version V3.1 only; for versions \u003c V3.1 refer to Siemens Security Bulletin SSB-439005 (\nhttps://cert-portal.siemens.com/productcert/html/ssb-439005.html).",
        "title": "Summary"
      },
      {
        "category": "general",
        "text": "As a general security measure, Siemens strongly recommends to protect network access to devices with appropriate mechanisms. In order to operate the devices in a protected IT environment, Siemens recommends to configure the environment according to Siemens\u0027 operational guidelines for Industrial Security (Download: \nhttps://www.siemens.com/cert/operational-guidelines-industrial-security), and to follow the recommendations in the product manuals.\nAdditional information on Industrial Security by Siemens can be found at: https://www.siemens.com/industrialsecurity",
        "title": "General Recommendations"
      },
      {
        "category": "general",
        "text": "For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories",
        "title": "Additional Resources"
      },
      {
        "category": "legal_disclaimer",
        "text": "Siemens Security Advisories are subject to the terms and conditions contained in Siemens\u0027 underlying license terms or other applicable agreements previously agreed to with Siemens (hereinafter \"License Terms\"). To the extent applicable to information, software or documentation made available in or through a Siemens Security Advisory, the Terms of Use of Siemens\u0027 Global Website (https://www.siemens.com/terms_of_use, hereinafter \"Terms of Use\"), in particular Sections 8-10 of the Terms of Use, shall apply additionally. In case of conflicts, the License Terms shall prevail over the Terms of Use.",
        "title": "Terms of Use"
      }
    ],
    "publisher": {
      "category": "vendor",
      "contact_details": "productcert@siemens.com",
      "name": "Siemens ProductCERT",
      "namespace": "https://www.siemens.com"
    },
    "references": [
      {
        "category": "self",
        "summary": "SSA-398330: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP V3.1 - HTML Version",
        "url": "https://cert-portal.siemens.com/productcert/html/ssa-398330.html"
      },
      {
        "category": "self",
        "summary": "SSA-398330: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP V3.1 - CSAF Version",
        "url": "https://cert-portal.siemens.com/productcert/csaf/ssa-398330.json"
      },
      {
        "category": "self",
        "summary": "SSA-398330: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP V3.1 - PDF Version",
        "url": "https://cert-portal.siemens.com/productcert/pdf/ssa-398330.pdf"
      },
      {
        "category": "self",
        "summary": "SSA-398330: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP V3.1 - TXT Version",
        "url": "https://cert-portal.siemens.com/productcert/txt/ssa-398330.txt"
      }
    ],
    "title": "SSA-398330: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP V3.1",
    "tracking": {
      "current_release_date": "2024-06-11T00:00:00Z",
      "generator": {
        "engine": {
          "name": "Siemens ProductCERT CSAF Generator",
          "version": "1"
        }
      },
      "id": "SSA-398330",
      "initial_release_date": "2023-12-12T00:00:00Z",
      "revision_history": [
        {
          "date": "2023-12-12T00:00:00Z",
          "legacy_version": "1.0",
          "number": "1",
          "summary": "Publication Date"
        },
        {
          "date": "2024-01-09T00:00:00Z",
          "legacy_version": "1.1",
          "number": "2",
          "summary": "Added CVE-2021-44879, CVE-2023-46218, CVE-2023-46219, and CVE-2023-48795"
        },
        {
          "date": "2024-02-13T00:00:00Z",
          "legacy_version": "1.2",
          "number": "3",
          "summary": "Added CVE-2023-45898, CVE-2023-46862, CVE-2023-6121, CVE-2023-6817, CVE-2023-6931, CVE-2023-6932, CVE-2024-0584"
        },
        {
          "date": "2024-03-12T00:00:00Z",
          "legacy_version": "1.3",
          "number": "4",
          "summary": "Added CVE-2023-52425, CVE-2023-52426, CVE-2023-45918"
        },
        {
          "date": "2024-04-09T00:00:00Z",
          "legacy_version": "1.4",
          "number": "5",
          "summary": "Added CVE-2024-28757"
        },
        {
          "date": "2024-05-14T00:00:00Z",
          "legacy_version": "1.5",
          "number": "6",
          "summary": "Added CVE-2024-2004, CVE-2024-2379, CVE-2024-2398, CVE-2024-2466, CVE-2024-2511, CVE-2024-28085, CVE-2024-28182, CVE-2024-28834, CVE-2024-28835"
        },
        {
          "date": "2024-06-11T00:00:00Z",
          "legacy_version": "1.6",
          "number": "7",
          "summary": "Added CVE-2024-2961, CVE-2024-33599, CVE-2024-33600, CVE-2024-33601, CVE-2024-33602, CVE-2024-34459"
        }
      ],
      "status": "interim",
      "version": "7"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003e=V3.1.0",
                "product": {
                  "name": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)",
                  "product_id": "1",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6ES7518-4AX00-1AB0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003e=V3.1.0",
                "product": {
                  "name": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)",
                  "product_id": "2",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6ES7518-4AX00-1AC0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003e=V3.1.0",
                "product": {
                  "name": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)",
                  "product_id": "3",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6ES7518-4FX00-1AB0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003e=V3.1.0",
                "product": {
                  "name": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)",
                  "product_id": "4",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6ES7518-4FX00-1AC0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003e=V3.1.0",
                "product": {
                  "name": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)",
                  "product_id": "5",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6AG1518-4AX00-4AC0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)"
          }
        ],
        "category": "vendor",
        "name": "Siemens"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2013-0340",
      "cwe": {
        "id": "CWE-611",
        "name": "Improper Restriction of XML External Entity Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "expat 2.1.0 and earlier does not properly handle entities expansion unless an application developer uses the XML_SetEntityDeclHandler function, which allows remote attackers to cause a denial of service (resource consumption), send HTTP requests to intranet servers, or read arbitrary files via a crafted XML document, aka an XML External Entity (XXE) issue.  NOTE: it could be argued that because expat already provides the ability to disable external entity expansion, the responsibility for resolving this issue lies with application developers; according to this argument, this entry should be REJECTed, and each affected application would need its own CVE.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2013-0340"
    },
    {
      "cve": "CVE-2013-4235",
      "cwe": {
        "id": "CWE-367",
        "name": "Time-of-check Time-of-use (TOCTOU) Race Condition"
      },
      "notes": [
        {
          "category": "summary",
          "text": "shadow: TOCTOU (time-of-check time-of-use) race condition when copying and removing directory trees",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2013-4235"
    },
    {
      "cve": "CVE-2014-7209",
      "cwe": {
        "id": "CWE-77",
        "name": "Improper Neutralization of Special Elements used in a Command (\u0027Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "run-mailcap in the Debian mime-support package before 3.52-1+deb7u1 allows context-dependent attackers to execute arbitrary commands via shell metacharacters in a filename.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.0,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:R/S:C/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2014-7209"
    },
    {
      "cve": "CVE-2015-20107",
      "cwe": {
        "id": "CWE-77",
        "name": "Improper Neutralization of Special Elements used in a Command (\u0027Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Python (aka CPython) up to 3.10.8, the mailcap module does not add escape characters into commands discovered in the system mailcap file. This may allow attackers to inject shell commands into applications that call mailcap.findmatch with untrusted input (if they lack validation of user-provided filenames or arguments). The fix is also back-ported to 3.7, 3.8, 3.9",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.6,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:H/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2015-20107"
    },
    {
      "cve": "CVE-2016-3189",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Use-after-free vulnerability in bzip2recover in bzip2 1.0.6 allows remote attackers to cause a denial of service (crash) via a crafted bzip2 file, related to block ends set to before the start of the block.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2016-3189"
    },
    {
      "cve": "CVE-2016-3709",
      "cwe": {
        "id": "CWE-79",
        "name": "Improper Neutralization of Input During Web Page Generation (\u0027Cross-site Scripting\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Possible cross-site scripting vulnerability in libxml after commit 960f0e2.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2016-3709"
    },
    {
      "cve": "CVE-2016-4658",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "xpointer.c in libxml2 before 2.9.5 (as used in Apple iOS before 10, OS X before 10.12, tvOS before 10, and watchOS before 3, and other products) does not forbid namespace nodes in XPointer ranges, which allows remote attackers to execute arbitrary code or cause a denial of service (use-after-free and memory corruption) via a crafted XML document.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2016-4658"
    },
    {
      "cve": "CVE-2016-5131",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Use-after-free vulnerability in libxml2 through 2.9.4, as used in Google Chrome before 52.0.2743.82, allows remote attackers to cause a denial of service or possibly have unspecified other impact via vectors related to the XPointer range-to function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2016-5131"
    },
    {
      "cve": "CVE-2016-9318",
      "cwe": {
        "id": "CWE-611",
        "name": "Improper Restriction of XML External Entity Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libxml2 2.9.4 and earlier, as used in XMLSec 1.2.23 and earlier and other products, does not offer a flag directly indicating that the current document may be read but other files may not be opened, which makes it easier for remote attackers to conduct XML External Entity (XXE) attacks via a crafted document.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2016-9318"
    },
    {
      "cve": "CVE-2016-10228",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The iconv program in the GNU C Library (aka glibc or libc6) 2.31 and earlier, when invoked with multiple suffixes in the destination encoding (TRANSLATE or IGNORE) along with the -c option, enters an infinite loop when processing invalid multi-byte input sequences, leading to a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2016-10228"
    },
    {
      "cve": "CVE-2016-10739",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the GNU C Library (aka glibc or libc6) through 2.28, the getaddrinfo function would successfully parse a string that contained an IPv4 address followed by whitespace and arbitrary characters, which could lead applications to incorrectly assume that it had parsed a valid string, without the possibility of embedded HTTP headers or other potentially dangerous substrings.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2016-10739"
    },
    {
      "cve": "CVE-2017-0663",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A remote code execution vulnerability in libxml2 could enable an attacker using a specially crafted file to execute arbitrary code within the context of an unprivileged process. This issue is rated as High due to the possibility of remote code execution in an application that uses this library. Product: Android. Versions: 4.4.4, 5.0.2, 5.1.1, 6.0, 6.0.1, 7.0, 7.1.1, 7.1.2. Android ID: A-37104170.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2017-0663"
    },
    {
      "cve": "CVE-2017-7375",
      "cwe": {
        "id": "CWE-611",
        "name": "Improper Restriction of XML External Entity Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw in libxml2 allows remote XML entity inclusion with default parser flags (i.e., when the caller did not request entity substitution, DTD validation, external DTD subset loading, or default DTD attributes). Depending on the context, this may expose a higher-risk attack surface in libxml2 not usually reachable with default parser flags, and expose content from local files, HTTP, or FTP servers (which might be otherwise unreachable).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2017-7375"
    },
    {
      "cve": "CVE-2017-7376",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer overflow in libxml2 allows remote attackers to execute arbitrary code by leveraging an incorrect limit for port values when handling redirects.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2017-7376"
    },
    {
      "cve": "CVE-2017-9047",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A buffer overflow was discovered in libxml2 20904-GITv2.9.4-16-g0741801. The function xmlSnprintfElementContent in valid.c is supposed to recursively dump the element content definition into a char buffer \u0027buf\u0027 of size \u0027size\u0027. The variable len is assigned strlen(buf). If the content-\u003etype is XML_ELEMENT_CONTENT_ELEMENT, then (i) the content-\u003eprefix is appended to buf (if it actually fits) whereupon (ii) content-\u003ename is written to the buffer. However, the check for whether the content-\u003ename actually fits also uses \u0027len\u0027 rather than the updated buffer length strlen(buf). This allows us to write about \"size\" many bytes beyond the allocated memory. This vulnerability causes programs that use libxml2, such as PHP, to crash.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2017-9047"
    },
    {
      "cve": "CVE-2017-9048",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libxml2 20904-GITv2.9.4-16-g0741801 is vulnerable to a stack-based buffer overflow. The function xmlSnprintfElementContent in valid.c is supposed to recursively dump the element content definition into a char buffer \u0027buf\u0027 of size \u0027size\u0027. At the end of the routine, the function may strcat two more characters without checking whether the current strlen(buf) + 2 \u003c size. This vulnerability causes programs that use libxml2, such as PHP, to crash.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2017-9048"
    },
    {
      "cve": "CVE-2017-9049",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libxml2 20904-GITv2.9.4-16-g0741801 is vulnerable to a heap-based buffer over-read in the xmlDictComputeFastKey function in dict.c. This vulnerability causes programs that use libxml2, such as PHP, to crash. This vulnerability exists because of an incomplete fix for libxml2 Bug 759398.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2017-9049"
    },
    {
      "cve": "CVE-2017-9050",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libxml2 20904-GITv2.9.4-16-g0741801 is vulnerable to a heap-based buffer over-read in the xmlDictAddString function in dict.c. This vulnerability causes programs that use libxml2, such as PHP, to crash. This vulnerability exists because of an incomplete fix for CVE-2016-1839.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2017-9050"
    },
    {
      "cve": "CVE-2017-16931",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "parser.c in libxml2 before 2.9.5 mishandles parameter-entity references because the NEXTL macro calls the xmlParserHandlePEReference function in the case of a \u0027%\u0027 character in a DTD name.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2017-16931"
    },
    {
      "cve": "CVE-2017-16932",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "parser.c in libxml2 before 2.9.5 does not prevent infinite recursion in parameter entities.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2017-16932"
    },
    {
      "cve": "CVE-2017-17512",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "sensible-browser in sensible-utils before 0.0.11 does not validate strings before launching the program specified by the BROWSER environment variable, which allows remote attackers to conduct argument-injection attacks via a crafted URL, as demonstrated by a --proxy-pac-file argument.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2017-17512"
    },
    {
      "cve": "CVE-2017-18258",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The xz_head function in xzlib.c in libxml2 before 2.9.6 allows remote attackers to cause a denial of service (memory consumption) via a crafted LZMA file, because the decoder functionality does not restrict memory usage to what is required for a legitimate file.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2017-18258"
    },
    {
      "cve": "CVE-2018-0495",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Libgcrypt before 1.7.10 and 1.8.x before 1.8.3 allows a memory-cache side-channel attack on ECDSA signatures that can be mitigated through the use of blinding during the signing process in the _gcry_ecc_ecdsa_sign function in cipher/ecc-ecdsa.c, aka the Return Of the Hidden Number Problem or ROHNP. To discover an ECDSA key, the attacker needs access to either the local machine or a different virtual machine on the same physical host.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2018-0495"
    },
    {
      "cve": "CVE-2018-12886",
      "cwe": {
        "id": "CWE-209",
        "name": "Generation of Error Message Containing Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "stack_protect_prologue in cfgexpand.c and stack_protect_epilogue in function.c in GNU Compiler Collection (GCC) 4.1 through 8 (under certain circumstances) generate instruction sequences when targeting ARM targets that spill the address of the stack protector guard, which allows an attacker to bypass the protection of -fstack-protector, -fstack-protector-all, -fstack-protector-strong, and -fstack-protector-explicit against stack overflow by controlling what the stack canary is compared against.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2018-12886"
    },
    {
      "cve": "CVE-2018-14404",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer dereference vulnerability exists in the xpath.c:xmlXPathCompOpEval() function of libxml2 through 2.9.8 when parsing an invalid XPath expression in the XPATH_OP_AND or XPATH_OP_OR case. Applications processing untrusted XSL format inputs with the use of the libxml2 library may be vulnerable to a denial of service attack due to a crash of the application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2018-14404"
    },
    {
      "cve": "CVE-2018-14567",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libxml2 2.9.8, if --with-lzma is used, allows remote attackers to cause a denial of service (infinite loop) via a crafted XML file that triggers LZMA_MEMLIMIT_ERROR, as demonstrated by xmllint, a different vulnerability than CVE-2015-8035 and CVE-2018-9251.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2018-14567"
    },
    {
      "cve": "CVE-2018-18928",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "International Components for Unicode (ICU) for C/C++ 63.1 has an integer overflow in number::impl::DecimalQuantity::toScientificString() in i18n/number_decimalquantity.cpp.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2018-18928"
    },
    {
      "cve": "CVE-2018-19591",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the GNU C Library (aka glibc or libc6) through 2.28, attempting to resolve a crafted hostname via getaddrinfo() leads to the allocation of a socket descriptor that is not closed. This is related to the if_nametoindex() function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2018-19591"
    },
    {
      "cve": "CVE-2018-20482",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU Tar through 1.30, when --sparse is used, mishandles file shrinkage during read access, which allows local users to cause a denial of service (infinite read loop in sparse_dump_region in sparse.c) by modifying a file that is supposed to be archived by a different user\u0027s process (e.g., a system backup running as root).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2018-20482"
    },
    {
      "cve": "CVE-2018-20843",
      "cwe": {
        "id": "CWE-611",
        "name": "Improper Restriction of XML External Entity Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libexpat in Expat before 2.2.7, XML input including XML names that contain a large number of colons could make the XML parser consume a high amount of RAM and CPU resources while processing (enough to be usable for denial-of-service attacks).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2018-20843"
    },
    {
      "cve": "CVE-2018-25032",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "zlib before 1.2.12 allows memory corruption when deflating (i.e., when compressing) if the input has many distant matches.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2018-25032"
    },
    {
      "cve": "CVE-2019-3855",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer overflow flaw which could lead to an out of bounds write was discovered in libssh2 before 1.8.1 in the way packets are read from the server. A remote attacker who compromises a SSH server may be able to execute code on the client system when a user connects to the server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-3855"
    },
    {
      "cve": "CVE-2019-3856",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer overflow flaw, which could lead to an out of bounds write, was discovered in libssh2 before 1.8.1 in the way keyboard prompt requests are parsed. A remote attacker who compromises a SSH server may be able to execute code on the client system when a user connects to the server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-3856"
    },
    {
      "cve": "CVE-2019-3857",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer overflow flaw which could lead to an out of bounds write was discovered in libssh2 before 1.8.1 in the way SSH_MSG_CHANNEL_REQUEST packets with an exit signal are parsed. A remote attacker who compromises a SSH server may be able to execute code on the client system when a user connects to the server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-3857"
    },
    {
      "cve": "CVE-2019-3858",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out of bounds read flaw was discovered in libssh2 before 1.8.1 when a specially crafted SFTP packet is received from the server. A remote attacker who compromises a SSH server may be able to cause a Denial of Service or read data in the client memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-3858"
    },
    {
      "cve": "CVE-2019-3859",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out of bounds read flaw was discovered in libssh2 before 1.8.1 in the _libssh2_packet_require and _libssh2_packet_requirev functions. A remote attacker who compromises a SSH server may be able to cause a Denial of Service or read data in the client memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-3859"
    },
    {
      "cve": "CVE-2019-3860",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out of bounds read flaw was discovered in libssh2 before 1.8.1 in the way SFTP packets with empty payloads are parsed. A remote attacker who compromises a SSH server may be able to cause a Denial of Service or read data in the client memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-3860"
    },
    {
      "cve": "CVE-2019-3861",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out of bounds read flaw was discovered in libssh2 before 1.8.1 in the way SSH packets with a padding length value greater than the packet length are parsed. A remote attacker who compromises a SSH server may be able to cause a Denial of Service or read data in the client memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-3861"
    },
    {
      "cve": "CVE-2019-3862",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out of bounds read flaw was discovered in libssh2 before 1.8.1 in the way SSH_MSG_CHANNEL_REQUEST packets with an exit status message and no payload are parsed. A remote attacker who compromises a SSH server may be able to cause a Denial of Service or read data in the client memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-3862"
    },
    {
      "cve": "CVE-2019-3863",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in libssh2 before 1.8.1. A server could send a multiple keyboard interactive response messages whose total length are greater than unsigned char max characters. This value is used as an index to copy memory causing in an out of bounds memory write error.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-3863"
    },
    {
      "cve": "CVE-2019-5018",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An exploitable use after free vulnerability exists in the window function functionality of Sqlite3 3.26.0. A specially crafted SQL command can cause a use after free vulnerability, potentially resulting in remote code execution. An attacker can send a malicious SQL command to trigger this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-5018"
    },
    {
      "cve": "CVE-2019-5094",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An exploitable code execution vulnerability exists in the quota file functionality of E2fsprogs 1.45.3. A specially crafted ext4 partition can cause an out-of-bounds write on the heap, resulting in code execution. An attacker can corrupt a partition to trigger this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-5094"
    },
    {
      "cve": "CVE-2019-5188",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A code execution vulnerability exists in the directory rehashing functionality of E2fsprogs e2fsck 1.45.4. A specially crafted ext4 directory can cause an out-of-bounds write on the stack, resulting in code execution. An attacker can corrupt a partition to trigger this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-5188"
    },
    {
      "cve": "CVE-2019-5435",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer overflow in curl\u0027s URL API results in a buffer overflow in libcurl 7.62.0 to and including 7.64.1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-5435"
    },
    {
      "cve": "CVE-2019-5436",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A heap buffer overflow in the TFTP receiving code allows for DoS or arbitrary code execution in libcurl versions 7.19.4 through 7.64.1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-5436"
    },
    {
      "cve": "CVE-2019-5443",
      "cwe": {
        "id": "CWE-427",
        "name": "Uncontrolled Search Path Element"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A non-privileged user or program can put code and a config file in a known non-privileged path (under C:/usr/local/) that will make curl \u003c= 7.65.1 automatically run the code (as an openssl \"engine\") on invocation. If that curl is invoked by a privileged user it can do anything it wants.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-5443"
    },
    {
      "cve": "CVE-2019-5481",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Double-free vulnerability in the FTP-kerberos code in cURL 7.52.0 to 7.65.3.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-5481"
    },
    {
      "cve": "CVE-2019-5482",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Heap buffer overflow in the TFTP protocol handler in cURL 7.19.4 to 7.65.3.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-5482"
    },
    {
      "cve": "CVE-2019-6109",
      "cwe": {
        "id": "CWE-116",
        "name": "Improper Encoding or Escaping of Output"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in OpenSSH 7.9. Due to missing character encoding in the progress display, a malicious server (or Man-in-The-Middle attacker) can employ crafted object names to manipulate the client output, e.g., by using ANSI control codes to hide additional files being transferred. This affects refresh_progress_meter() in progressmeter.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.8,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-6109"
    },
    {
      "cve": "CVE-2019-6110",
      "cwe": {
        "id": "CWE-838",
        "name": "Inappropriate Encoding for Output Context"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In OpenSSH 7.9, due to accepting and displaying arbitrary stderr output from the server, a malicious server (or Man-in-The-Middle attacker) can manipulate the client output, for example to use ANSI control codes to hide additional files being transferred.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.8,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-6110"
    },
    {
      "cve": "CVE-2019-6111",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in OpenSSH 7.9. Due to the scp implementation being derived from 1983 rcp, the server chooses which files/directories are sent to the client. However, the scp client only performs cursory validation of the object name returned (only directory traversal attacks are prevented). A malicious scp server (or Man-in-The-Middle attacker) can overwrite arbitrary files in the scp client target directory. If recursive operation (-r) is performed, the server can manipulate subdirectories as well (for example, to overwrite the .ssh/authorized_keys file).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-6111"
    },
    {
      "cve": "CVE-2019-6488",
      "cwe": {
        "id": "CWE-404",
        "name": "Improper Resource Shutdown or Release"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The string component in the GNU C Library (aka glibc or libc6) through 2.28, when running on the x32 architecture, incorrectly attempts to use a 64-bit register for size_t in assembly codes, which can lead to a segmentation fault or possibly unspecified other impact, as demonstrated by a crash in __memmove_avx_unaligned_erms in sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S during a memcpy.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-6488"
    },
    {
      "cve": "CVE-2019-7309",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the GNU C Library (aka glibc or libc6) through 2.29, the memcmp function for the x32 architecture can incorrectly return zero (indicating that the inputs are equal) because the RDX most significant bit is mishandled.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-7309"
    },
    {
      "cve": "CVE-2019-8457",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite3 from 3.6.0 to and including 3.27.2 is vulnerable to heap out-of-bound read in the rtreenode() function when handling invalid rtree tables.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-8457"
    },
    {
      "cve": "CVE-2019-9169",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the GNU C Library (aka glibc or libc6) through 2.29, proceed_next_node in posix/regexec.c has a heap-based buffer over-read via an attempted case-insensitive regular-expression match.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-9169"
    },
    {
      "cve": "CVE-2019-9636",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Python 2.7.x through 2.7.16 and 3.x through 3.7.2 is affected by: Improper Handling of Unicode Encoding (with an incorrect netloc) during NFKC normalization. The impact is: Information disclosure (credentials, cookies, etc. that are cached against a given hostname). The components are: urllib.parse.urlsplit, urllib.parse.urlparse. The attack vector is: A specially crafted URL could be incorrectly parsed to locate cookies or authentication data and send that information to a different host than when parsed correctly. This is fixed in: v2.7.17, v2.7.17rc1, v2.7.18, v2.7.18rc1; v3.5.10, v3.5.10rc1, v3.5.7, v3.5.8, v3.5.8rc1, v3.5.8rc2, v3.5.9; v3.6.10, v3.6.10rc1, v3.6.11, v3.6.11rc1, v3.6.12, v3.6.9, v3.6.9rc1; v3.7.3, v3.7.3rc1, v3.7.4, v3.7.4rc1, v3.7.4rc2, v3.7.5, v3.7.5rc1, v3.7.6, v3.7.6rc1, v3.7.7, v3.7.7rc1, v3.7.8, v3.7.8rc1, v3.7.9.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-9636"
    },
    {
      "cve": "CVE-2019-9674",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Lib/zipfile.py in Python through 3.7.2 allows remote attackers to cause a denial of service (resource consumption) via a ZIP bomb.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-9674"
    },
    {
      "cve": "CVE-2019-9740",
      "cwe": {
        "id": "CWE-93",
        "name": "Improper Neutralization of CRLF Sequences (\u0027CRLF Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in urllib2 in Python 2.x through 2.7.16 and urllib in Python 3.x through 3.7.3. CRLF injection is possible if the attacker controls a url parameter, as demonstrated by the first argument to urllib.request.urlopen with \\r\\n (specifically in the query string after a ? character) followed by an HTTP header or a Redis command. This is fixed in: v2.7.17, v2.7.17rc1, v2.7.18, v2.7.18rc1; v3.5.10, v3.5.10rc1, v3.5.8, v3.5.8rc1, v3.5.8rc2, v3.5.9; v3.6.10, v3.6.10rc1, v3.6.11, v3.6.11rc1, v3.6.12, v3.6.9, v3.6.9rc1; v3.7.4, v3.7.4rc1, v3.7.4rc2, v3.7.5, v3.7.5rc1, v3.7.6, v3.7.6rc1, v3.7.7, v3.7.7rc1, v3.7.8, v3.7.8rc1, v3.7.9.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-9740"
    },
    {
      "cve": "CVE-2019-9923",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "pax_decode_header in sparse.c in GNU Tar before 1.32 had a NULL pointer dereference when parsing certain archives that have malformed extended headers.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-9923"
    },
    {
      "cve": "CVE-2019-9936",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite 3.27.2, running fts5 prefix queries inside a transaction could trigger a heap-based buffer over-read in fts5HashEntrySort in sqlite3.c, which may lead to an information leak. This is related to ext/fts5/fts5_hash.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-9936"
    },
    {
      "cve": "CVE-2019-9937",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite 3.27.2, interleaving reads and writes in a single transaction with an fts5 virtual table will lead to a NULL Pointer Dereference in fts5ChunkIterate in sqlite3.c. This is related to ext/fts5/fts5_hash.c and ext/fts5/fts5_index.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-9937"
    },
    {
      "cve": "CVE-2019-9947",
      "cwe": {
        "id": "CWE-93",
        "name": "Improper Neutralization of CRLF Sequences (\u0027CRLF Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in urllib2 in Python 2.x through 2.7.16 and urllib in Python 3.x through 3.7.3. CRLF injection is possible if the attacker controls a url parameter, as demonstrated by the first argument to urllib.request.urlopen with \\r\\n (specifically in the path component of a URL that lacks a ? character) followed by an HTTP header or a Redis command. This is similar to the CVE-2019-9740 query string issue. This is fixed in: v2.7.17, v2.7.17rc1, v2.7.18, v2.7.18rc1; v3.5.10, v3.5.10rc1, v3.5.8, v3.5.8rc1, v3.5.8rc2, v3.5.9; v3.6.10, v3.6.10rc1, v3.6.11, v3.6.11rc1, v3.6.12, v3.6.9, v3.6.9rc1; v3.7.4, v3.7.4rc1, v3.7.4rc2, v3.7.5, v3.7.5rc1, v3.7.6, v3.7.6rc1, v3.7.7, v3.7.7rc1, v3.7.8, v3.7.8rc1, v3.7.9.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-9947"
    },
    {
      "cve": "CVE-2019-9948",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "urllib in Python 2.x through 2.7.16 supports the local_file: scheme, which makes it easier for remote attackers to bypass protection mechanisms that blacklist file: URIs, as demonstrated by triggering a urllib.urlopen(\u0027local_file:///etc/passwd\u0027) call.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-9948"
    },
    {
      "cve": "CVE-2019-10160",
      "cwe": {
        "id": "CWE-172",
        "name": "Encoding Error"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A security regression of CVE-2019-9636 was discovered in python since commit d537ab0ff9767ef024f26246899728f0116b1ec3 affecting versions 2.7, 3.5, 3.6, 3.7 and from v3.8.0a4 through v3.8.0b1, which still allows an attacker to exploit CVE-2019-9636 by abusing the user and password parts of a URL. When an application parses user-supplied URLs to store cookies, authentication credentials, or other kind of information, it is possible for an attacker to provide specially crafted URLs to make the application locate host-related information (e.g. cookies, authentication data) and send them to a different host than where it should, unlike if the URLs had been correctly parsed. The result of an attack may vary based on the application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-10160"
    },
    {
      "cve": "CVE-2019-11360",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A buffer overflow in iptables-restore in netfilter iptables 1.8.2 allows an attacker to (at least) crash the program or potentially gain code execution via a specially crafted iptables-save file. This is related to add_param_to_argv in xshared.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.2,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-11360"
    },
    {
      "cve": "CVE-2019-12290",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU libidn2 before 2.2.0 fails to perform the roundtrip checks specified in RFC3490 Section 4.2 when converting A-labels to U-labels. This makes it possible in some circumstances for one domain to impersonate another. By creating a malicious domain that matches a target domain except for the inclusion of certain punycoded Unicode characters (that would be discarded when converted first to a Unicode label and then back to an ASCII label), arbitrary domains can be impersonated.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-12290"
    },
    {
      "cve": "CVE-2019-12900",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "BZ2_decompress in decompress.c in bzip2 through 1.0.6 has an out-of-bounds write when there are many selectors.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-12900"
    },
    {
      "cve": "CVE-2019-12904",
      "cwe": {
        "id": "CWE-668",
        "name": "Exposure of Resource to Wrong Sphere"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Libgcrypt 1.8.4, the C implementation of AES is vulnerable to a flush-and-reload side-channel attack because physical addresses are available to other processes. (The C implementation is used on platforms where an assembly-language implementation is unavailable.) NOTE: the vendor\u0027s position is that the issue report cannot be validated because there is no description of an attack",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-12904"
    },
    {
      "cve": "CVE-2019-13057",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the server in OpenLDAP before 2.4.48. When the server administrator delegates rootDN (database admin) privileges for certain databases but wants to maintain isolation (e.g., for multi-tenant deployments), slapd does not properly stop a rootDN from requesting authorization as an identity from another database during a SASL bind or with a proxyAuthz (RFC 4370) control. (It is not a common configuration to deploy a system where the server administrator and a DB administrator enjoy different levels of trust.)",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-13057"
    },
    {
      "cve": "CVE-2019-13565",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in OpenLDAP 2.x before 2.4.48. When using SASL authentication and session encryption, and relying on the SASL security layers in slapd access controls, it is possible to obtain access that would otherwise be denied via a simple bind for any identity covered in those ACLs. After the first SASL bind is completed, the sasl_ssf value is retained for all new non-SASL connections. Depending on the ACL configuration, this can affect different types of operations (searches, modifications, etc.). In other words, a successful authorization step completed by one user affects the authorization requirement for a different user.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-13565"
    },
    {
      "cve": "CVE-2019-13627",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "It was discovered that there was a ECDSA timing attack in the libgcrypt20 cryptographic library. Version affected: 1.8.4-5, 1.7.6-2+deb9u3, and 1.6.3-2+deb8u4. Versions fixed: 1.8.5-2 and 1.6.3-2+deb8u7.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:N/UI:R/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-13627"
    },
    {
      "cve": "CVE-2019-15847",
      "cwe": {
        "id": "CWE-331",
        "name": "Insufficient Entropy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The POWER9 backend in GNU Compiler Collection (GCC) before version 10 could optimize multiple calls of the __builtin_darn intrinsic into a single call, thus reducing the entropy of the random number generator. This occurred because a volatile operation was not specified. For example, within a single execution of a program, the output of every __builtin_darn() call may be the same.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-15847"
    },
    {
      "cve": "CVE-2019-15903",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libexpat before 2.2.8, crafted XML input could fool the parser into changing from DTD parsing to document parsing too early; a consecutive call to XML_GetCurrentLineNumber (or XML_GetCurrentColumnNumber) then resulted in a heap-based buffer over-read.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-15903"
    },
    {
      "cve": "CVE-2019-16056",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in Python through 2.7.16, 3.x through 3.5.7, 3.6.x through 3.6.9, and 3.7.x through 3.7.4. The email module wrongly parses email addresses that contain multiple @ characters. An application that uses the email module and implements some kind of checks on the From/To headers of a message could be tricked into accepting an email address that should be denied. An attack may be the same as in CVE-2019-11340; however, this CVE applies to Python more generally.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-16056"
    },
    {
      "cve": "CVE-2019-16168",
      "cwe": {
        "id": "CWE-369",
        "name": "Divide By Zero"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite through 3.29.0, whereLoopAddBtreeIndex in sqlite3.c can crash a browser or other application because of missing validation of a sqlite_stat1 sz field, aka a \"severe division by zero in the query planner.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-16168"
    },
    {
      "cve": "CVE-2019-16905",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "OpenSSH 7.7 through 7.9 and 8.x before 8.1, when compiled with an experimental key type, has a pre-authentication integer overflow if a client or server is configured to use a crafted XMSS key. This leads to memory corruption and local code execution because of an error in the XMSS key parsing algorithm. NOTE: the XMSS implementation is considered experimental in all released OpenSSH versions, and there is no supported way to enable it when building portable OpenSSH.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-16905"
    },
    {
      "cve": "CVE-2019-17498",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libssh2 v1.9.0 and earlier versions, the SSH_MSG_DISCONNECT logic in packet.c has an integer overflow in a bounds check, enabling an attacker to specify an arbitrary (out-of-bounds) offset for a subsequent memory read. A crafted SSH server may be able to disclose sensitive information or cause a denial of service condition on the client system when a user connects to the server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-17498"
    },
    {
      "cve": "CVE-2019-17543",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "LZ4 before 1.9.2 has a heap-based buffer overflow in LZ4_write32 (related to LZ4_compress_destSize), affecting applications that call LZ4_compress_fast with a large input. (This issue can also lead to data corruption.) NOTE: the vendor states \"only a few specific / uncommon usages of the API are at risk.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-17543"
    },
    {
      "cve": "CVE-2019-17594",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a heap-based buffer over-read in the _nc_find_entry function in tinfo/comp_hash.c in the terminfo library in ncurses before 6.1-20191012.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-17594"
    },
    {
      "cve": "CVE-2019-17595",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a heap-based buffer over-read in the fmt_entry function in tinfo/comp_hash.c in the terminfo library in ncurses before 6.1-20191012.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:L/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-17595"
    },
    {
      "cve": "CVE-2019-18224",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "idn2_to_ascii_4i in lib/lookup.c in GNU libidn2 before 2.1.1 has a heap-based buffer overflow via a long domain string.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-18224"
    },
    {
      "cve": "CVE-2019-18276",
      "cwe": {
        "id": "CWE-273",
        "name": "Improper Check for Dropped Privileges"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in disable_priv_mode in shell.c in GNU Bash through 5.0 patch 11. By default, if Bash is run with its effective UID not equal to its real UID, it will drop privileges by setting its effective UID to its real UID. However, it does so incorrectly. On Linux and other systems that support \"saved UID\" functionality, the saved UID is not dropped. An attacker with command execution in the shell can use \"enable -f\" for runtime loading of a new builtin, which can be a shared object that calls setuid() and therefore regains privileges. However, binaries running with an effective UID of 0 are unaffected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-18276"
    },
    {
      "cve": "CVE-2019-18348",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in urllib2 in Python 2.x through 2.7.17 and urllib in Python 3.x through 3.8.0. CRLF injection is possible if the attacker controls a url parameter, as demonstrated by the first argument to urllib.request.urlopen with \\r\\n (specifically in the host component of a URL) followed by an HTTP header. This is similar to the CVE-2019-9740 query string issue and the CVE-2019-9947 path string issue. (This is not exploitable when glibc has CVE-2016-10739 fixed.). This is fixed in: v2.7.18, v2.7.18rc1; v3.5.10, v3.5.10rc1; v3.6.11, v3.6.11rc1, v3.6.12; v3.7.8, v3.7.8rc1, v3.7.9; v3.8.3, v3.8.3rc1, v3.8.4, v3.8.4rc1, v3.8.5, v3.8.6, v3.8.6rc1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-18348"
    },
    {
      "cve": "CVE-2019-19126",
      "cwe": {
        "id": "CWE-665",
        "name": "Improper Initialization"
      },
      "notes": [
        {
          "category": "summary",
          "text": "On the x86-64 architecture, the GNU C Library (aka glibc) before 2.31 fails to ignore the LD_PREFER_MAP_32BIT_EXEC environment variable during program execution after a security transition, allowing local attackers to restrict the possible mapping addresses for loaded libraries and thus bypass ASLR for a setuid program.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19126"
    },
    {
      "cve": "CVE-2019-19242",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite 3.30.1 mishandles pExpr-\u003ey.pTab, as demonstrated by the TK_COLUMN case in sqlite3ExprCodeTarget in expr.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19242"
    },
    {
      "cve": "CVE-2019-19244",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Select in select.c in SQLite 3.30.1 allows a crash if a sub-select uses both DISTINCT and window functions, and also has certain ORDER BY usage.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19244"
    },
    {
      "cve": "CVE-2019-19317",
      "cwe": {
        "id": "CWE-681",
        "name": "Incorrect Conversion between Numeric Types"
      },
      "notes": [
        {
          "category": "summary",
          "text": "lookupName in resolve.c in SQLite 3.30.1 omits bits from the colUsed bitmask in the case of a generated column, which allows attackers to cause a denial of service or possibly have unspecified other impact.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19317"
    },
    {
      "cve": "CVE-2019-19603",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite 3.30.1 mishandles certain SELECT statements with a nonexistent VIEW, leading to an application crash.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19603"
    },
    {
      "cve": "CVE-2019-19645",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "alter.c in SQLite through 3.30.1 allows attackers to trigger infinite recursion via certain types of self-referential views in conjunction with ALTER TABLE statements.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19645"
    },
    {
      "cve": "CVE-2019-19646",
      "cwe": {
        "id": "CWE-754",
        "name": "Improper Check for Unusual or Exceptional Conditions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "pragma.c in SQLite through 3.30.1 mishandles NOT NULL in an integrity_check PRAGMA command in certain cases of generated columns.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19646"
    },
    {
      "cve": "CVE-2019-19880",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "exprListAppendList in window.c in SQLite 3.30.1 allows attackers to trigger an invalid pointer dereference because constant integer values in ORDER BY clauses of window definitions are mishandled.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19880"
    },
    {
      "cve": "CVE-2019-19906",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "cyrus-sasl (aka Cyrus SASL) 2.1.27 has an out-of-bounds write leading to unauthenticated remote denial-of-service in OpenLDAP via a malformed LDAP packet. The OpenLDAP crash is ultimately caused by an off-by-one error in _sasl_add_string in common.c in cyrus-sasl.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19906"
    },
    {
      "cve": "CVE-2019-19923",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "flattenSubquery in select.c in SQLite 3.30.1 mishandles certain uses of SELECT DISTINCT involving a LEFT JOIN in which the right-hand side is a view. This can cause a NULL pointer dereference (or incorrect results).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19923"
    },
    {
      "cve": "CVE-2019-19924",
      "cwe": {
        "id": "CWE-755",
        "name": "Improper Handling of Exceptional Conditions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite 3.30.1 mishandles certain parser-tree rewriting, related to expr.c, vdbeaux.c, and window.c. This is caused by incorrect sqlite3WindowRewrite() error handling.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19924"
    },
    {
      "cve": "CVE-2019-19925",
      "cwe": {
        "id": "CWE-434",
        "name": "Unrestricted Upload of File with Dangerous Type"
      },
      "notes": [
        {
          "category": "summary",
          "text": "zipfileUpdate in ext/misc/zipfile.c in SQLite 3.30.1 mishandles a NULL pathname during an update of a ZIP archive.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19925"
    },
    {
      "cve": "CVE-2019-19926",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "multiSelect in select.c in SQLite 3.30.1 mishandles certain errors during parsing, as demonstrated by errors from sqlite3WindowRewrite() calls. NOTE: this vulnerability exists because of an incomplete fix for CVE-2019-19880.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19926"
    },
    {
      "cve": "CVE-2019-19956",
      "cwe": {
        "id": "CWE-772",
        "name": "Missing Release of Resource after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "xmlParseBalancedChunkMemoryRecover in parser.c in libxml2 before 2.9.10 has a memory leak related to newDoc-\u003eoldNs.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19956"
    },
    {
      "cve": "CVE-2019-19959",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ext/misc/zipfile.c in SQLite 3.30.1 mishandles certain uses of INSERT INTO in situations involving embedded \u0027\\0\u0027 characters in filenames, leading to a memory-management error that can be detected by (for example) valgrind.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-19959"
    },
    {
      "cve": "CVE-2019-20218",
      "cwe": {
        "id": "CWE-755",
        "name": "Improper Handling of Exceptional Conditions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "selectExpander in select.c in SQLite 3.30.1 proceeds with WITH stack unwinding even after a parsing error.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-20218"
    },
    {
      "cve": "CVE-2019-20367",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nlist.c in libbsd before 0.10.0 has an out-of-bounds read during a comparison for a symbol name from the string table (strtab).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-20367"
    },
    {
      "cve": "CVE-2019-20388",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "xmlSchemaPreRun in xmlschemas.c in libxml2 2.9.10 allows an xmlSchemaValidateStream memory leak.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-20388"
    },
    {
      "cve": "CVE-2019-20795",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "iproute2 before 5.1.0 has a use-after-free in get_netnsid_from_name in ip/ipnetns.c. NOTE: security relevance may be limited to certain uses of setuid that, although not a default, are sometimes a configuration option offered to end users. Even when setuid is used, other factors (such as C library configuration) may block exploitability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-20795"
    },
    {
      "cve": "CVE-2019-20907",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Lib/tarfile.py in Python through 3.8.3, an attacker is able to craft a TAR archive leading to an infinite loop when opened by tarfile.open, because _proc_pax lacks header validation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-20907"
    },
    {
      "cve": "CVE-2019-25013",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The iconv feature in the GNU C Library (aka glibc or libc6) through 2.32, when processing invalid multi-byte input sequences in the EUC-KR encoding, may have a buffer over-read.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-25013"
    },
    {
      "cve": "CVE-2019-1010022",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "** DISPUTED ** GNU Libc current is affected by: Mitigation bypass. The impact is: Attacker may bypass stack guard protection. The component is: nptl. The attack vector is: Exploit stack buffer overflow vulnerability and use this bypass vulnerability to bypass stack guard. NOTE: Upstream comments indicate \"this is being treated as a non-security bug and no real threat.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-1010022"
    },
    {
      "cve": "CVE-2019-1010023",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "** DISPUTED ** GNU Libc current is affected by: Re-mapping current loaded library with malicious ELF file. The impact is: In worst case attacker may evaluate privileges. The component is: libld. The attack vector is: Attacker sends 2 ELF files to victim and asks to run ldd on it. ldd execute code. NOTE: Upstream comments indicate \"this is being treated as a non-security bug and no real threat.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-1010023"
    },
    {
      "cve": "CVE-2019-1010024",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "** DISPUTED ** GNU Libc current is affected by: Mitigation bypass. The impact is: Attacker may bypass ASLR using cache of thread stack and heap. The component is: glibc. NOTE: Upstream comments indicate \"this is being treated as a non-security bug and no real threat.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-1010024"
    },
    {
      "cve": "CVE-2019-1010025",
      "cwe": {
        "id": "CWE-330",
        "name": "Use of Insufficiently Random Values"
      },
      "notes": [
        {
          "category": "summary",
          "text": "** DISPUTED ** GNU Libc current is affected by: Mitigation bypass. The impact is: Attacker may guess the heap addresses of pthread_created thread. The component is: glibc. NOTE: the vendor\u0027s position is \"ASLR bypass itself is not a vulnerability.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-1010025"
    },
    {
      "cve": "CVE-2019-1010180",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU gdb All versions is affected by: Buffer Overflow - Out of bound memory access. The impact is: Deny of Service, Memory Disclosure, and Possible Code Execution. The component is: The main gdb module. The attack vector is: Open an ELF for debugging. The fixed version is: Not fixed yet.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2019-1010180"
    },
    {
      "cve": "CVE-2020-1712",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A heap use-after-free vulnerability was found in systemd before version v245-rc1, where asynchronous Polkit queries are performed while handling dbus messages. A local unprivileged attacker can abuse this flaw to crash systemd services or potentially execute code and elevate their privileges, by sending specially crafted dbus messages.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-1712"
    },
    {
      "cve": "CVE-2020-1751",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds write vulnerability was found in glibc before 2.31 when handling signal trampolines on PowerPC. Specifically, the backtrace function did not properly check the array bounds when storing the frame address, resulting in a denial of service or potential code execution. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-1751"
    },
    {
      "cve": "CVE-2020-1752",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability introduced in glibc upstream version 2.14 was found in the way the tilde expansion was carried out. Directory paths containing an initial tilde followed by a valid username were affected by this issue. A local attacker could exploit this flaw by creating a specially crafted path that, when processed by the glob function, would potentially lead to arbitrary code execution. This was fixed in version 2.32.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-1752"
    },
    {
      "cve": "CVE-2020-6096",
      "cwe": {
        "id": "CWE-195",
        "name": "Signed to Unsigned Conversion Error"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An exploitable signed comparison vulnerability exists in the ARMv7 memcpy() implementation of GNU glibc 2.30.9000. Calling memcpy() (on ARMv7 targets that utilize the GNU glibc implementation) with a negative value for the \u0027num\u0027 parameter results in a signed comparison vulnerability. If an attacker underflows the \u0027num\u0027 parameter to memcpy(), this vulnerability could lead to undefined behavior such as writing to out-of-bounds memory and potentially remote code execution. Furthermore, this memcpy() implementation allows for program execution to continue in scenarios where a segmentation fault or crash should have occurred. The dangers occur in that subsequent execution and iterations of this code will be executed with this corrupted data.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-6096"
    },
    {
      "cve": "CVE-2020-7595",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "xmlStringLenDecodeEntities in parser.c in libxml2 2.9.10 has an infinite loop in a certain end-of-file situation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-7595"
    },
    {
      "cve": "CVE-2020-8169",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The libcurl library versions 7.62.0 to and including  7.70.0 are vulnerable to an information disclosure vulnerability that can lead to a partial password being leaked over the network and to the DNS server(s).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-8169"
    },
    {
      "cve": "CVE-2020-8177",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl 7.20.0 through 7.70.0 is vulnerable to improper restriction of names for files and other resources that can lead too overwriting a local file when the -J flag is used.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-8177"
    },
    {
      "cve": "CVE-2020-8231",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Due to use of a dangling pointer, libcurl 7.29.0 through 7.71.1 can use the wrong connection when sending data.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-8231"
    },
    {
      "cve": "CVE-2020-8284",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A malicious server can use the FTP PASV response to trick curl 7.73.0 and earlier into connecting back to a given IP address and port, and this way potentially make curl extract information about services that are otherwise private and not disclosed, for example doing port scanning and service banner extractions.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-8284"
    },
    {
      "cve": "CVE-2020-8285",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl 7.21.0 to and including 7.73.0 is vulnerable to uncontrolled recursion due to a stack overflow issue in FTP wildcard match parsing.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-8285"
    },
    {
      "cve": "CVE-2020-8286",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The libcurl library versions 7.41.0 to and including  7.73.0 are vulnerable to an improper check for certificate revocation due to insufficient verification of the OCSP response. This vulnerability could allow an attacker to pass a revoked certificate as valid.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-8286"
    },
    {
      "cve": "CVE-2020-8315",
      "cwe": {
        "id": "CWE-427",
        "name": "Uncontrolled Search Path Element"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Python (CPython) 3.6 through 3.6.10, 3.7 through 3.7.6, and 3.8 through 3.8.1, an insecure dependency load upon launch on Windows 7 may result in an attacker\u0027s copy of api-ms-win-core-path-l1-1-0.dll being loaded and used instead of the system\u0027s copy. Windows 8 and later are unaffected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-8315"
    },
    {
      "cve": "CVE-2020-8492",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Python 2.7 through 2.7.17, 3.5 through 3.5.9, 3.6 through 3.6.10, 3.7 through 3.7.6, and 3.8 through 3.8.1 allows an HTTP server to conduct Regular Expression Denial of Service (ReDoS) attacks against a client because of urllib.request.AbstractBasicAuthHandler catastrophic backtracking.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-8492"
    },
    {
      "cve": "CVE-2020-9327",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite 3.31.1, isAuxiliaryVtabOperator allows attackers to trigger a NULL pointer dereference and segmentation fault because of generated column optimizations.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-9327"
    },
    {
      "cve": "CVE-2020-10029",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The GNU C Library (aka glibc or libc6) before 2.32 could overflow an on-stack buffer during range reduction if an input to an 80-bit long double function contains a non-canonical bit pattern, a seen when passing a 0x5d414141414141410000 value to sinl on x86 targets. This is related to sysdeps/ieee754/ldbl-96/e_rem_pio2l.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-10029"
    },
    {
      "cve": "CVE-2020-10531",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in International Components for Unicode (ICU) for C/C++ through 66.1. An integer overflow, leading to a heap-based buffer overflow, exists in the UnicodeString::doAppend() function in common/unistr.cpp.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-10531"
    },
    {
      "cve": "CVE-2020-10543",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Perl before 5.30.3 on 32-bit platforms allows a heap-based buffer overflow because nested regular expression quantifiers have an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.2,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-10543"
    },
    {
      "cve": "CVE-2020-10735",
      "cwe": {
        "id": "CWE-704",
        "name": "Incorrect Type Conversion or Cast"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in python. In algorithms with quadratic time complexity using non-binary bases, when using int(\"text\"), a system could take 50ms to parse an int string with 100,000 digits and 5s for 1,000,000 digits (float, decimal, int.from_bytes(), and int() for binary bases 2, 4, 8, 16, and 32 are not affected). The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-10735"
    },
    {
      "cve": "CVE-2020-10878",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Perl before 5.30.3 has an integer overflow related to mishandling of a \"PL_regkind[OP(n)] == NOTHING\" situation. A crafted regular expression could lead to malformed bytecode with a possibility of instruction injection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.6,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-10878"
    },
    {
      "cve": "CVE-2020-11501",
      "cwe": {
        "id": "CWE-330",
        "name": "Use of Insufficiently Random Values"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GnuTLS 3.6.x before 3.6.13 uses incorrect cryptography for DTLS. The earliest affected version is 3.6.3 (2018-07-16) because of an error in a 2017-10-06 commit. The DTLS client always uses 32 \u0027\\0\u0027 bytes instead of a random value, and thus contributes no randomness to a DTLS negotiation. This breaks the security guarantees of the DTLS protocol.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-11501"
    },
    {
      "cve": "CVE-2020-11655",
      "cwe": {
        "id": "CWE-665",
        "name": "Improper Initialization"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite through 3.31.1 allows attackers to cause a denial of service (segmentation fault) via a malformed window-function query because the AggInfo object\u0027s initialization is mishandled.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-11655"
    },
    {
      "cve": "CVE-2020-11656",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite through 3.31.1, the ALTER TABLE implementation has a use-after-free, as demonstrated by an ORDER BY clause that belongs to a compound SELECT statement.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-11656"
    },
    {
      "cve": "CVE-2020-12062",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The scp client in OpenSSH 8.2 incorrectly sends duplicate responses to the server upon a utimes system call failure, which allows a malicious unprivileged user on the remote server to overwrite arbitrary files in the client\u0027s download directory by creating a crafted subdirectory anywhere on the remote server. The victim must use the command scp -rp to download a file hierarchy containing, anywhere inside, this crafted subdirectory. NOTE: the vendor points out that \"this attack can achieve no more than a hostile peer is already able to achieve within the scp protocol\" and \"utimes does not fail under normal circumstances.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-12062"
    },
    {
      "cve": "CVE-2020-12243",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In filter.c in slapd in OpenLDAP before 2.4.50, LDAP search filters with nested boolean expressions can result in denial of service (daemon crash).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-12243"
    },
    {
      "cve": "CVE-2020-12723",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "regcomp.c in Perl before 5.30.3 allows a buffer overflow via a crafted regular expression because of recursive S_study_chunk calls.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-12723"
    },
    {
      "cve": "CVE-2020-12762",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "json-c through 0.14 has an integer overflow and out-of-bounds write via a large JSON file, as demonstrated by printbuf_memappend.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-12762"
    },
    {
      "cve": "CVE-2020-13434",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite through 3.32.0 has an integer overflow in sqlite3_str_vappendf in printf.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-13434"
    },
    {
      "cve": "CVE-2020-13435",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite through 3.32.0 has a segmentation fault in sqlite3ExprCodeTarget in expr.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-13435"
    },
    {
      "cve": "CVE-2020-13529",
      "cwe": {
        "id": "CWE-290",
        "name": "Authentication Bypass by Spoofing"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An exploitable denial-of-service vulnerability exists in Systemd 245. A specially crafted DHCP FORCERENEW packet can cause a server running the DHCP client to be vulnerable to a DHCP ACK spoofing attack. An attacker can forge a pair of FORCERENEW and DCHP ACK packets to reconfigure the server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:A/AC:H/PR:N/UI:N/S:C/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-13529"
    },
    {
      "cve": "CVE-2020-13630",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ext/fts3/fts3.c in SQLite before 3.32.0 has a use-after-free in fts3EvalNextRow, related to the snippet feature.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-13630"
    },
    {
      "cve": "CVE-2020-13631",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite before 3.32.0 allows a virtual table to be renamed to the name of one of its shadow tables, related to alter.c and build.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-13631"
    },
    {
      "cve": "CVE-2020-13632",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ext/fts3/fts3_snippet.c in SQLite before 3.32.0 has a NULL pointer dereference via a crafted matchinfo() query.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-13632"
    },
    {
      "cve": "CVE-2020-13776",
      "cwe": {
        "id": "CWE-269",
        "name": "Improper Privilege Management"
      },
      "notes": [
        {
          "category": "summary",
          "text": "systemd through v245 mishandles numerical usernames such as ones composed of decimal digits or 0x followed by hex digits, as demonstrated by use of root privileges when privileges of the 0x0 user account were intended. NOTE: this issue exists because of an incomplete fix for CVE-2017-1000082.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-13776"
    },
    {
      "cve": "CVE-2020-13777",
      "cwe": {
        "id": "CWE-327",
        "name": "Use of a Broken or Risky Cryptographic Algorithm"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GnuTLS 3.6.x before 3.6.14 uses incorrect cryptography for encrypting a session ticket (a loss of confidentiality in TLS 1.2, and an authentication bypass in TLS 1.3). The earliest affected version is 3.6.4 (2018-09-24) because of an error in a 2018-09-18 commit. Until the first key rotation, the TLS server always uses wrong data in place of an encryption key derived from an application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-13777"
    },
    {
      "cve": "CVE-2020-13871",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite 3.32.2 has a use-after-free in resetAccumulator in select.c because the parse tree rewrite for window functions is too late.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-13871"
    },
    {
      "cve": "CVE-2020-14145",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The client side in OpenSSH 5.7 through 8.4 has an Observable Discrepancy leading to an information leak in the algorithm negotiation. This allows man-in-the-middle attackers to target initial connection attempts (where no host key for the server has been cached by the client). NOTE: some reports state that 8.5 and 8.6 are also affected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-14145"
    },
    {
      "cve": "CVE-2020-14422",
      "cwe": {
        "id": "CWE-682",
        "name": "Incorrect Calculation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Lib/ipaddress.py in Python through 3.8.3 improperly computes hash values in the IPv4Interface and IPv6Interface classes, which might allow a remote attacker to cause a denial of service if an application is affected by the performance of a dictionary containing IPv4Interface or IPv6Interface objects, and this attacker can cause many dictionary entries to be created. This is fixed in: v3.5.10, v3.5.10rc1; v3.6.12; v3.7.9; v3.8.4, v3.8.4rc1, v3.8.5, v3.8.6, v3.8.6rc1; v3.9.0, v3.9.0b4, v3.9.0b5, v3.9.0rc1, v3.9.0rc2.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-14422"
    },
    {
      "cve": "CVE-2020-15358",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite before 3.32.3, select.c mishandles query-flattener optimization, leading to a multiSelectOrderBy heap overflow because of misuse of transitive properties for constant propagation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-15358"
    },
    {
      "cve": "CVE-2020-15523",
      "cwe": {
        "id": "CWE-427",
        "name": "Uncontrolled Search Path Element"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Python 3.6 through 3.6.10, 3.7 through 3.7.8, 3.8 through 3.8.4rc1, and 3.9 through 3.9.0b4 on Windows, a Trojan horse python3.dll might be used in cases where CPython is embedded in a native application. This occurs because python3X.dll may use an invalid search path for python3.dll loading (after Py_SetPath has been used). NOTE: this issue CANNOT occur when using python.exe from a standard (non-embedded) Python installation on Windows.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-15523"
    },
    {
      "cve": "CVE-2020-15778",
      "cwe": {
        "id": "CWE-78",
        "name": "Improper Neutralization of Special Elements used in an OS Command (\u0027OS Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "scp in OpenSSH through 8.3p1 allows command injection in the scp.c toremote function, as demonstrated by backtick characters in the destination argument. NOTE: the vendor reportedly has stated that they intentionally omit validation of \"anomalous argument transfers\" because that could \"stand a great chance of breaking existing workflows.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-15778"
    },
    {
      "cve": "CVE-2020-15801",
      "cwe": {
        "id": "CWE-426",
        "name": "Untrusted Search Path"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Python 3.8.4, sys.path restrictions specified in a python38._pth file are ignored, allowing code to be loaded from arbitrary locations. The \u003cexecutable-name\u003e._pth file (e.g., the python._pth file) is not affected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-15801"
    },
    {
      "cve": "CVE-2020-19185",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer Overflow vulnerability in one_one_mapping function in progs/dump_entry.c:1373 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-19185"
    },
    {
      "cve": "CVE-2020-19186",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer Overflow vulnerability in _nc_find_entry function in tinfo/comp_hash.c:66 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-19186"
    },
    {
      "cve": "CVE-2020-19187",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer Overflow vulnerability in fmt_entry function in progs/dump_entry.c:1100 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-19187"
    },
    {
      "cve": "CVE-2020-19188",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer Overflow vulnerability in fmt_entry function in progs/dump_entry.c:1116 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-19188"
    },
    {
      "cve": "CVE-2020-19189",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer Overflow vulnerability in postprocess_terminfo function in tinfo/parse_entry.c:997 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-19189"
    },
    {
      "cve": "CVE-2020-19190",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer Overflow vulnerability in _nc_find_entry in tinfo/comp_hash.c:70 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-19190"
    },
    {
      "cve": "CVE-2020-19909",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Integer overflow vulnerability in tool_operate.c in curl 7.65.2 via a large value as the retry delay. NOTE: many parties report that this has no direct security impact on the curl user; however, it may (in theory) cause a denial of service to associated systems or networks if, for example, --retry-delay is misinterpreted as a value much smaller than what was intended. This is not especially plausible because the overflow only happens if the user was trying to specify that curl should wait weeks (or longer) before trying to recover from a transient error.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-19909"
    },
    {
      "cve": "CVE-2020-21047",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The libcpu component which is used by libasm of elfutils version 0.177 (git 47780c9e), suffers from denial-of-service vulnerability caused by application crashes due to out-of-bounds write (CWE-787), off-by-one error (CWE-193) and reachable assertion (CWE-617); to exploit the vulnerability, the attackers need to craft certain ELF files which bypass the missing bound checks.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-21047"
    },
    {
      "cve": "CVE-2020-21913",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "International Components for Unicode (ICU-20850) v66.1 was discovered to contain a use after free bug in the pkg_createWithAssemblyCode function in the file tools/pkgdata/pkgdata.cpp.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-21913"
    },
    {
      "cve": "CVE-2020-22218",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in function _libssh2_packet_add in libssh2 1.10.0 allows attackers to access out of bounds memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-22218"
    },
    {
      "cve": "CVE-2020-24659",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in GnuTLS before 3.6.15. A server can trigger a NULL pointer dereference in a TLS 1.3 client if a no_renegotiation alert is sent with unexpected timing, and then an invalid second handshake occurs. The crash happens in the application\u0027s error handling path, where the gnutls_deinit function is called after detecting a handshake failure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-24659"
    },
    {
      "cve": "CVE-2020-24977",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNOME project libxml2 v2.9.10 has a global buffer over-read vulnerability in xmlEncodeEntitiesInternal at libxml2/entities.c. The issue has been fixed in commit 50f06b3e.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-24977"
    },
    {
      "cve": "CVE-2020-25692",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer dereference was found in OpenLDAP server and was fixed in openldap 2.4.55, during a request for renaming RDNs. An unauthenticated attacker could remotely crash the slapd process by sending a specially crafted request, causing a Denial of Service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-25692"
    },
    {
      "cve": "CVE-2020-25709",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in OpenLDAP. This flaw allows an attacker who can send a malicious packet to be processed by OpenLDAP\u2019s slapd server, to trigger an assertion failure. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-25709"
    },
    {
      "cve": "CVE-2020-25710",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in OpenLDAP in versions before 2.4.56. This flaw allows an attacker who sends a malicious packet processed by OpenLDAP to force a failed assertion in csnNormalize23(). The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-25710"
    },
    {
      "cve": "CVE-2020-26116",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "http.client in Python 3.x before 3.5.10, 3.6.x before 3.6.12, 3.7.x before 3.7.9, and 3.8.x before 3.8.5 allows CRLF injection if the attacker controls the HTTP request method, as demonstrated by inserting CR and LF control characters in the first argument of HTTPConnection.request.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.2,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-26116"
    },
    {
      "cve": "CVE-2020-27618",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The iconv function in the GNU C Library (aka glibc or libc6) 2.32 and earlier, when processing invalid multi-byte input sequences in IBM1364, IBM1371, IBM1388, IBM1390, and IBM1399 encodings, fails to advance the input state, which could lead to an infinite loop in applications, resulting in a denial of service, a different vulnerability from CVE-2016-10228.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-27618"
    },
    {
      "cve": "CVE-2020-28196",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "MIT Kerberos 5 (aka krb5) before 1.17.2 and 1.18.x before 1.18.3 allows unbounded recursion via an ASN.1-encoded Kerberos message because the lib/krb5/asn.1/asn1_encode.c support for BER indefinite lengths lacks a recursion limit.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-28196"
    },
    {
      "cve": "CVE-2020-29361",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in p11-kit 0.21.1 through 0.23.21. Multiple integer overflows have been discovered in the array allocations in the p11-kit library and the p11-kit list command, where overflow checks are missing before calling realloc or calloc.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-29361"
    },
    {
      "cve": "CVE-2020-29362",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in p11-kit 0.21.1 through 0.23.21. A heap-based buffer over-read has been discovered in the RPC protocol used by thep11-kit server/remote commands and the client library. When the remote entity supplies a byte array through a serialized PKCS#11 function call, the receiving entity may allow the reading of up to 4 bytes of memory past the heap allocation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-29362"
    },
    {
      "cve": "CVE-2020-29363",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in p11-kit 0.23.6 through 0.23.21. A heap-based buffer overflow has been discovered in the RPC protocol used by p11-kit server/remote commands and the client library. When the remote entity supplies a serialized byte array in a CK_ATTRIBUTE, the receiving entity may not allocate sufficient length for the buffer to store the deserialized value.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-29363"
    },
    {
      "cve": "CVE-2020-29562",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The iconv function in the GNU C Library (aka glibc or libc6) 2.30 to 2.32, when converting UCS4 text containing an irreversible character, fails an assertion in the code path and aborts the program, potentially resulting in a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.8,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:L/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-29562"
    },
    {
      "cve": "CVE-2020-29573",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "sysdeps/i386/ldbl2mpn.c in the GNU C Library (aka glibc or libc6) before 2.23 on x86 targets has a stack-based buffer overflow if the input to any of the printf family of functions is an 80-bit long double with a non-canonical bit pattern, as seen when passing a \\x00\\x04\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x04 value to sprintf. NOTE: the issue does not affect glibc by default in 2016 or later (i.e., 2.23 or later) because of commits made in 2015 for inlining of C99 math functions through use of GCC built-ins. In other words, the reference to 2.23 is intentional despite the mention of \"Fixed for glibc 2.33\" in the 26649 reference.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-29573"
    },
    {
      "cve": "CVE-2020-35525",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQlite 3.31.1, a potential null pointer derreference was found in the INTERSEC query processing.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-35525"
    },
    {
      "cve": "CVE-2020-35527",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite 3.31.1, there is an out of bounds access problem through ALTER TABLE for views that have a nested FROM clause.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-35527"
    },
    {
      "cve": "CVE-2020-36221",
      "cwe": {
        "id": "CWE-191",
        "name": "Integer Underflow (Wrap or Wraparound)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer underflow was discovered in OpenLDAP before 2.4.57 leading to slapd crashes in the Certificate Exact Assertion processing, resulting in denial of service (schema_init.c serialNumberAndIssuerCheck).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-36221"
    },
    {
      "cve": "CVE-2020-36222",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading to an assertion failure in slapd in the saslAuthzTo validation, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-36222"
    },
    {
      "cve": "CVE-2020-36223",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading to a slapd crash in the Values Return Filter control handling, resulting in denial of service (double free and out-of-bounds read).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-36223"
    },
    {
      "cve": "CVE-2020-36224",
      "cwe": {
        "id": "CWE-763",
        "name": "Release of Invalid Pointer or Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading to an invalid pointer free and slapd crash in the saslAuthzTo processing, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-36224"
    },
    {
      "cve": "CVE-2020-36225",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading to a double free and slapd crash in the saslAuthzTo processing, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-36225"
    },
    {
      "cve": "CVE-2020-36226",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading to a memch-\u003ebv_len miscalculation and slapd crash in the saslAuthzTo processing, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-36226"
    },
    {
      "cve": "CVE-2020-36227",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading to an infinite loop in slapd with the cancel_extop Cancel operation, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-36227"
    },
    {
      "cve": "CVE-2020-36228",
      "cwe": {
        "id": "CWE-191",
        "name": "Integer Underflow (Wrap or Wraparound)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer underflow was discovered in OpenLDAP before 2.4.57 leading to a slapd crash in the Certificate List Exact Assertion processing, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-36228"
    },
    {
      "cve": "CVE-2020-36229",
      "cwe": {
        "id": "CWE-843",
        "name": "Access of Resource Using Incompatible Type (\u0027Type Confusion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in ldap_X509dn2bv in OpenLDAP before 2.4.57 leading to a slapd crash in the X.509 DN parsing in ad_keystring, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-36229"
    },
    {
      "cve": "CVE-2020-36230",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading in an assertion failure in slapd in the X.509 DN parsing in decode.c ber_next_element, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2020-36230"
    },
    {
      "cve": "CVE-2021-3177",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Python 3.x through 3.9.1 has a buffer overflow in PyCArg_repr in _ctypes/callproc.c, which may lead to remote code execution in certain Python applications that accept floating-point numbers as untrusted input, as demonstrated by a 1e300 argument to c_double.from_param. This occurs because sprintf is used unsafely.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3177"
    },
    {
      "cve": "CVE-2021-3326",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The iconv function in the GNU C Library (aka glibc or libc6) 2.32 and earlier, when processing invalid input sequences in the ISO-2022-JP-3 encoding, fails an assertion in the code path and aborts the program, potentially resulting in a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3326"
    },
    {
      "cve": "CVE-2021-3426",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There\u0027s a flaw in Python 3\u0027s pydoc. A local or adjacent attacker who discovers or is able to convince another local or adjacent user to start a pydoc server could access the server and use it to disclose sensitive information belonging to the other user that they would not normally be able to access. The highest risk of this flaw is to data confidentiality. This flaw affects Python versions before 3.8.9, Python versions before 3.9.3 and Python versions before 3.10.0a7.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3426"
    },
    {
      "cve": "CVE-2021-3516",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There\u0027s a flaw in libxml2\u0027s xmllint in versions before 2.9.11. An attacker who is able to submit a crafted file to be processed by xmllint could trigger a use-after-free. The greatest impact of this flaw is to confidentiality, integrity, and availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3516"
    },
    {
      "cve": "CVE-2021-3517",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a flaw in the xml entity encoding functionality of libxml2 in versions before 2.9.11. An attacker who is able to supply a crafted file to be processed by an application linked with the affected functionality of libxml2 could trigger an out-of-bounds read. The most likely impact of this flaw is to application availability, with some potential impact to confidentiality and integrity if an attacker is able to use memory information to further exploit the application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.6,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3517"
    },
    {
      "cve": "CVE-2021-3518",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There\u0027s a flaw in libxml2 in versions before 2.9.11. An attacker who is able to submit a crafted file to be processed by an application linked with libxml2 could trigger a use-after-free. The greatest impact from this flaw is to confidentiality, integrity, and availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3518"
    },
    {
      "cve": "CVE-2021-3520",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There\u0027s a flaw in lz4. An attacker who submits a crafted file to an application linked with lz4 may be able to trigger an integer overflow, leading to calling of memmove() on a negative size argument, causing an out-of-bounds write and/or a crash. The greatest impact of this flaw is to availability, with some potential impact to confidentiality and integrity as well.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3520"
    },
    {
      "cve": "CVE-2021-3537",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability found in libxml2 in versions before 2.9.11 shows that it did not propagate errors while parsing XML mixed content, causing a NULL dereference. If an untrusted XML document was parsed in recovery mode and post-validated, the flaw could be used to crash the application. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3537"
    },
    {
      "cve": "CVE-2021-3541",
      "cwe": {
        "id": "CWE-776",
        "name": "Improper Restriction of Recursive Entity References in DTDs (\u0027XML Entity Expansion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in libxml2. Exponential entity expansion attack its possible bypassing all existing protection mechanisms and leading to denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3541"
    },
    {
      "cve": "CVE-2021-3580",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the way nettle\u0027s RSA decryption functions handled specially crafted ciphertext. An attacker could use this flaw to provide a manipulated ciphertext leading to application crash and denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3580"
    },
    {
      "cve": "CVE-2021-3733",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There\u0027s a flaw in urllib\u0027s AbstractBasicAuthHandler class. An attacker who controls a malicious HTTP server that an HTTP client (such as web browser) connects to, could trigger a Regular Expression Denial of Service (ReDOS) during an authentication request with a specially crafted payload that is sent by the server to the client. The greatest threat that this flaw poses is to application availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3733"
    },
    {
      "cve": "CVE-2021-3737",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in python. An improperly handled HTTP response in the HTTP client code of python may allow a remote attacker, who controls the HTTP server, to make the client script enter an infinite loop, consuming CPU time. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3737"
    },
    {
      "cve": "CVE-2021-3826",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Heap/stack buffer overflow in the dlang_lname function in d-demangle.c in libiberty allows attackers to potentially cause a denial of service (segmentation fault and crash) via a crafted mangled symbol.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3826"
    },
    {
      "cve": "CVE-2021-3997",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in systemd. An uncontrolled recursion in systemd-tmpfiles may lead to a denial of service at boot time when too many nested directories are created in /tmp.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3997"
    },
    {
      "cve": "CVE-2021-3998",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in glibc. The realpath() function can mistakenly return an unexpected value, potentially leading to information leakage and disclosure of sensitive data.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3998"
    },
    {
      "cve": "CVE-2021-3999",
      "cwe": {
        "id": "CWE-193",
        "name": "Off-by-one Error"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in glibc. An off-by-one buffer overflow and underflow in getcwd() may lead to memory corruption when the size of the buffer is exactly 1. A local attacker who can control the input buffer and size passed to getcwd() in a setuid program could use this flaw to potentially execute arbitrary code and escalate their privileges on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-3999"
    },
    {
      "cve": "CVE-2021-4122",
      "cwe": {
        "id": "CWE-345",
        "name": "Insufficient Verification of Data Authenticity"
      },
      "notes": [
        {
          "category": "summary",
          "text": "It was found that a specially crafted LUKS header could trick cryptsetup into disabling encryption during the recovery of the device. An attacker with physical access to the medium, such as a flash disk, could use this flaw to force a user into permanently disabling the encryption layer of that medium.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:P/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-4122"
    },
    {
      "cve": "CVE-2021-4189",
      "cwe": {
        "id": "CWE-252",
        "name": "Unchecked Return Value"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in Python, specifically in the FTP (File Transfer Protocol) client library in PASV (passive) mode. The issue is how the FTP client trusts the host from the PASV response by default. This flaw allows an attacker to set up a malicious FTP server that can trick FTP clients into connecting back to a given IP address and port. This vulnerability could lead to FTP client scanning ports, which otherwise would not have been possible.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-4189"
    },
    {
      "cve": "CVE-2021-4209",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer dereference flaw was found in GnuTLS. As Nettle\u0027s hash update functions internally call memcpy, providing zero-length input may cause undefined behavior. This flaw leads to a denial of service after authentication in rare circumstances.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-4209"
    },
    {
      "cve": "CVE-2021-20193",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the src/list.c of tar 1.33 and earlier. This flaw allows an attacker who can submit a crafted input file to tar to cause uncontrolled consumption of memory. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-20193"
    },
    {
      "cve": "CVE-2021-20227",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in SQLite\u0027s SELECT query functionality (src/select.c). This flaw allows an attacker who is capable of running SQL queries locally on the SQLite database to cause a denial of service or possible code execution by triggering a use-after-free. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-20227"
    },
    {
      "cve": "CVE-2021-20231",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in gnutls. A use after free issue in client sending key_share extension may lead to memory corruption and other consequences.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-20231"
    },
    {
      "cve": "CVE-2021-20232",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in gnutls. A use after free issue in client_send_params in lib/ext/pre_shared_key.c may lead to memory corruption and other potential consequences.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-20232"
    },
    {
      "cve": "CVE-2021-20305",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in Nettle in versions before 3.7.2, where several Nettle signature verification functions (GOST DSA, EDDSA \u0026 ECDSA) result in the Elliptic Curve Cryptography point (ECC) multiply function being called with out-of-range scalers, possibly resulting in incorrect results. This flaw allows an attacker to force an invalid signature, causing an assertion failure or possible validation. The highest threat to this vulnerability is to confidentiality, integrity, as well as system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-20305"
    },
    {
      "cve": "CVE-2021-22876",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl 7.1.1 to and including 7.75.0 is vulnerable to an \"Exposure of Private Personal Information to an Unauthorized Actor\" by leaking credentials in the HTTP Referer: header. libcurl does not strip off user credentials from the URL when automatically populating the Referer: HTTP request header field in outgoing HTTP requests, and therefore risks leaking sensitive data to the server that is the target of the second HTTP request.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-22876"
    },
    {
      "cve": "CVE-2021-22890",
      "cwe": {
        "id": "CWE-290",
        "name": "Authentication Bypass by Spoofing"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl 7.63.0 to and including 7.75.0 includes vulnerability that allows a malicious HTTPS proxy to MITM a connection due to bad handling of TLS 1.3 session tickets. When using a HTTPS proxy and TLS 1.3, libcurl can confuse session tickets arriving from the HTTPS proxy but work as if they arrived from the remote server and then wrongly \"short-cut\" the host handshake. When confusing the tickets, a HTTPS proxy can trick libcurl to use the wrong session ticket resume for the host and thereby circumvent the server TLS certificate check and make a MITM attack to be possible to perform unnoticed. Note that such a malicious HTTPS proxy needs to provide a certificate that curl will accept for the MITMed server for an attack to work - unless curl has been told to ignore the server certificate check.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-22890"
    },
    {
      "cve": "CVE-2021-22897",
      "cwe": {
        "id": "CWE-668",
        "name": "Exposure of Resource to Wrong Sphere"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl 7.61.0 through 7.76.1 suffers from exposure of data element to wrong session due to a mistake in the code for CURLOPT_SSL_CIPHER_LIST when libcurl is built to use the Schannel TLS library. The selected cipher set was stored in a single \"static\" variable in the library, which has the surprising side-effect that if an application sets up multiple concurrent transfers, the last one that sets the ciphers will accidentally control the set used by all transfers. In a worst-case scenario, this weakens transport security significantly.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-22897"
    },
    {
      "cve": "CVE-2021-22898",
      "cwe": {
        "id": "CWE-909",
        "name": "Missing Initialization of Resource"
      },
      "notes": [
        {
          "category": "summary",
          "text": "**NOTE: CVE-2021-22898 is an incomplete fix (see https://hackerone.com/reports/1223882)! Check if affected products also have fixed CVE-22925 instead! Do not use CVE-2021-22898 in public advisories!**\r\n\r\ncurl 7.7 through 7.76.1 suffers from an information disclosure when the `-t` command line option, known as `CURLOPT_TELNETOPTIONS` in libcurl, is used to send variable=content pairs to TELNET servers. Due to a flaw in the option parser for sending NEW_ENV variables, libcurl could be made to pass on uninitialized data from a stack based buffer to the server, resulting in potentially revealing sensitive internal information to the server using a clear-text network protocol.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.1,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-22898"
    },
    {
      "cve": "CVE-2021-22901",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl 7.75.0 through 7.76.1 suffers from a use-after-free vulnerability resulting in already freed memory being used when a TLS 1.3 session ticket arrives over a connection. A malicious server can use this in rare unfortunate circumstances to potentially reach remote code execution in the client. When libcurl at run-time sets up support for TLS 1.3 session tickets on a connection using OpenSSL, it stores pointers to the transfer in-memory object for later retrieval when a session ticket arrives. If the connection is used by multiple transfers (like with a reused HTTP/1.1 connection or multiplexed HTTP/2 connection) that first transfer object might be freed before the new session is established on that connection and then the function will access a memory buffer that might be freed. When using that memory, libcurl might even call a function pointer in the object, making it possible for a remote code execution if the server could somehow manage to get crafted memory content into the correct place in memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-22901"
    },
    {
      "cve": "CVE-2021-22922",
      "cwe": {
        "id": "CWE-354",
        "name": "Improper Validation of Integrity Check Value"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl is instructed to download content using the metalink feature, thecontents is verified against a hash provided in the metalink XML file.The metalink XML file points out to the client how to get the same contentfrom a set of different URLs, potentially hosted by different servers and theclient can then download the file from one or several of them. In a serial orparallel manner.If one of the servers hosting the contents has been breached and the contentsof the specific file on that server is replaced with a modified payload, curlshould detect this when the hash of the file mismatches after a completeddownload. It should remove the contents and instead try getting the contentsfrom another URL. This is not done, and instead such a hash mismatch is onlymentioned in text and the potentially malicious content is kept in the file ondisk.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-22922"
    },
    {
      "cve": "CVE-2021-22923",
      "cwe": {
        "id": "CWE-522",
        "name": "Insufficiently Protected Credentials"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl is instructed to get content using the metalink feature, and a user name and password are used to download the metalink XML file, those same credentials are then subsequently passed on to each of the servers from which curl will download or try to download the contents from. Often contrary to the user\u0027s expectations and intentions and without telling the user it happened.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-22923"
    },
    {
      "cve": "CVE-2021-22924",
      "cwe": {
        "id": "CWE-706",
        "name": "Use of Incorrectly-Resolved Name or Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl keeps previously used connections in a connection pool for subsequent transfers to reuse, if one of them matches the setup. Due to errors in the logic, the config matching function did not take \u0027issuercert\u0027 into account and it compared the involved paths *case insensitively*, which could lead to libcurl reusing wrong connections. File paths are, or can be, case sensitive on many systems but not all, and can even vary depending on used file systems. The comparison also didn\u0027t include the \u0027issuer cert\u0027 which a transfer can set to qualify how to verify the server certificate.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-22924"
    },
    {
      "cve": "CVE-2021-22925",
      "cwe": {
        "id": "CWE-908",
        "name": "Use of Uninitialized Resource"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl supports the `-t` command line option, known as `CURLOPT_TELNETOPTIONS` in libcurl. This rarely used option is used to send variable=content pairs to TELNET servers. Due to flaw in the option parser for sending `NEW_ENV` variables, libcurl could be made to pass on uninitialized data from a stack based buffer to the server. Therefore potentially revealing sensitive internal information to the server using a clear-text network protocol. This could happen because curl did not call and use sscanf() correctly when parsing the string provided by the application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-22925"
    },
    {
      "cve": "CVE-2021-22926",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl-using applications can ask for a specific client certificate to be used in a transfer. This is done with the `CURLOPT_SSLCERT` option (`--cert` with the command line tool).When libcurl is built to use the macOS native TLS library Secure Transport, an application can ask for the client certificate by name or with a file name - using the same option. If the name exists as a file, it will be used instead of by name.If the appliction runs with a current working directory that is writable by other users (like `/tmp`), a malicious user can create a file name with the same name as the app wants to use by name, and thereby trick the application to use the file based cert instead of the one referred to by name making libcurl send the wrong client certificate in the TLS connection handshake.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-22926"
    },
    {
      "cve": "CVE-2021-22945",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When sending data to an MQTT server, libcurl \u003c= 7.73.0 and 7.78.0 could in some circumstances erroneously keep a pointer to an already freed memory area and both use that again in a subsequent call to send data and also free it *again*.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-22945"
    },
    {
      "cve": "CVE-2021-22946",
      "cwe": {
        "id": "CWE-319",
        "name": "Cleartext Transmission of Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A user can tell curl \u003e= 7.20.0 and \u003c= 7.78.0 to require a successful upgrade to TLS when speaking to an IMAP, POP3 or FTP server (`--ssl-reqd` on the command line or`CURLOPT_USE_SSL` set to `CURLUSESSL_CONTROL` or `CURLUSESSL_ALL` withlibcurl). This requirement could be bypassed if the server would return a properly crafted but perfectly legitimate response.This flaw would then make curl silently continue its operations **withoutTLS** contrary to the instructions and expectations, exposing possibly sensitive data in clear text over the network.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-22946"
    },
    {
      "cve": "CVE-2021-22947",
      "cwe": {
        "id": "CWE-345",
        "name": "Insufficient Verification of Data Authenticity"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl \u003e= 7.20.0 and \u003c= 7.78.0 connects to an IMAP or POP3 server to retrieve data using STARTTLS to upgrade to TLS security, the server can respond and send back multiple responses at once that curl caches. curl would then upgrade to TLS but not flush the in-queue of cached responses but instead continue using and trustingthe responses it got *before* the TLS handshake as if they were authenticated.Using this flaw, it allows a Man-In-The-Middle attacker to first inject the fake responses, then pass-through the TLS traffic from the legitimate server and trick curl into sending data back to the user thinking the attacker\u0027s injected data comes from the TLS-protected server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-22947"
    },
    {
      "cve": "CVE-2021-23336",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The package python/cpython from 0 and before 3.6.13, from 3.7.0 and before 3.7.10, from 3.8.0 and before 3.8.8, from 3.9.0 and before 3.9.2 are vulnerable to Web Cache Poisoning via urllib.parse.parse_qsl and urllib.parse.parse_qs by using a vector called parameter cloaking. When the attacker can separate query parameters using a semicolon (;), they can cause a difference in the interpretation of the request between the proxy (running with default configuration) and the server. This can result in malicious requests being cached as completely safe ones, as the proxy would usually not see the semicolon as a separator, and therefore would not include it in a cache key of an unkeyed parameter.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:N/I:L/A:H/E:P/RL:U/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-23336"
    },
    {
      "cve": "CVE-2021-27212",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In OpenLDAP through 2.4.57 and 2.5.x through 2.5.1alpha, an assertion failure in slapd can occur in the issuerAndThisUpdateCheck function via a crafted packet, resulting in a denial of service (daemon exit) via a short timestamp. This is related to schema_init.c and checkTime.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-27212"
    },
    {
      "cve": "CVE-2021-27218",
      "cwe": {
        "id": "CWE-681",
        "name": "Incorrect Conversion between Numeric Types"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in GNOME GLib before 2.66.7 and 2.67.x before 2.67.4. If g_byte_array_new_take() was called with a buffer of 4GB or more on a 64-bit platform, the length would be truncated modulo 2**32, causing unintended length truncation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-27218"
    },
    {
      "cve": "CVE-2021-27219",
      "cwe": {
        "id": "CWE-681",
        "name": "Incorrect Conversion between Numeric Types"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in GNOME GLib before 2.66.6 and 2.67.x before 2.67.3. The function g_bytes_new has an integer overflow on 64-bit platforms due to an implicit cast from 64 bits to 32 bits. The overflow could potentially lead to memory corruption.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-27219"
    },
    {
      "cve": "CVE-2021-27645",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The nameserver caching daemon (nscd) in the GNU C Library (aka glibc or libc6) 2.29 through 2.33, when processing a request for netgroup lookup, may crash due to a double-free, potentially resulting in degraded service or Denial of Service on the local system. This is related to netgroupcache.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 2.5,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-27645"
    },
    {
      "cve": "CVE-2021-28041",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ssh-agent in OpenSSH before 8.5 has a double free that may be relevant in a few less-common scenarios, such as unconstrained agent-socket access on a legacy operating system, or the forwarding of an agent to an attacker-controlled host.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:L/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-28041"
    },
    {
      "cve": "CVE-2021-28153",
      "cwe": {
        "id": "CWE-59",
        "name": "Improper Link Resolution Before File Access (\u0027Link Following\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in GNOME GLib before 2.66.8. When g_file_replace() is used with G_FILE_CREATE_REPLACE_DESTINATION to replace a path that is a dangling symlink, it incorrectly also creates the target of the symlink as an empty file, which could conceivably have security relevance if the symlink is attacker-controlled. (If the path is a symlink to a file that already exists, then the contents of that file correctly remain unchanged.)",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-28153"
    },
    {
      "cve": "CVE-2021-28363",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The urllib3 library 1.26.x before 1.26.4 for Python omits SSL certificate validation in some cases involving HTTPS to HTTPS proxies. The initial connection to the HTTPS proxy (if an SSLContext isn\u0027t given via proxy_config) doesn\u0027t verify the hostname of the certificate. This means certificates for different servers that still validate properly with the default urllib3 SSLContext will be silently accepted.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-28363"
    },
    {
      "cve": "CVE-2021-28861",
      "cwe": {
        "id": "CWE-601",
        "name": "URL Redirection to Untrusted Site (\u0027Open Redirect\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Python 3.x through 3.10 has an open redirection vulnerability in lib/http/server.py due to no protection against multiple (/) at the beginning of URI path which may leads to information disclosure. NOTE: this is disputed by a third party because the http.server.html documentation page states \"Warning: http.server is not recommended for production. It only implements basic security checks.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-28861"
    },
    {
      "cve": "CVE-2021-31239",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue found in SQLite SQLite3 v.3.35.4 that could allow a remote attacker to cause a denial of service via the appendvfs.c function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-31239"
    },
    {
      "cve": "CVE-2021-32292",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in json-c from 20200420 (post 0.14 unreleased code) through 0.15-20200726. A stack-buffer-overflow exists in the auxiliary sample program json_parse which is located in the function parseit.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-32292"
    },
    {
      "cve": "CVE-2021-33294",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In elfutils 0.183, an infinite loop was found in the function handle_symtab in readelf.c .Which allows attackers to cause a denial of service (infinite loop) via crafted file.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-33294"
    },
    {
      "cve": "CVE-2021-33560",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Libgcrypt before 1.8.8 and 1.9.x before 1.9.3 mishandles ElGamal encryption because it lacks exponent blinding to address a side-channel attack against mpi_powm, and the window size is not chosen appropriately. This, for example, affects use of ElGamal in OpenPGP.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-33560"
    },
    {
      "cve": "CVE-2021-33574",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The mq_notify function in the GNU C Library (aka glibc) versions 2.32 and 2.33 has a use-after-free. It may use the notification thread attributes object (passed through its struct sigevent parameter) after it has been freed by the caller, leading to a denial of service (application crash) or possibly unspecified other impact.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-33574"
    },
    {
      "cve": "CVE-2021-33910",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The use of alloca function with an uncontrolled size in function unit_name_path_escape allows a local attacker, able to mount a filesystem on a very long path, to crash systemd and the whole system by allocating a very large space in the stack.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-33910"
    },
    {
      "cve": "CVE-2021-35942",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The wordexp function in the GNU C Library (aka glibc) through 2.33 may crash or read arbitrary memory in parse_param (in posix/wordexp.c) when called with an untrusted, crafted pattern, potentially resulting in a denial of service or disclosure of information. This occurs because atoi was used but strtoul should have been used to ensure correct calculations.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-35942"
    },
    {
      "cve": "CVE-2021-36084",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The CIL compiler in SELinux 3.2 has a use-after-free in __cil_verify_classperms (called from __cil_verify_classpermission and __cil_pre_verify_helper).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-36084"
    },
    {
      "cve": "CVE-2021-36085",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The CIL compiler in SELinux 3.2 has a use-after-free in __cil_verify_classperms (called from __verify_map_perm_classperms and hashtab_map).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-36085"
    },
    {
      "cve": "CVE-2021-36086",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The CIL compiler in SELinux 3.2 has a use-after-free in cil_reset_classpermission (called from cil_reset_classperms_set and cil_reset_classperms_list).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-36086"
    },
    {
      "cve": "CVE-2021-36087",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The CIL compiler in SELinux 3.2 has a heap-based buffer over-read in ebitmap_match_any (called indirectly from cil_check_neverallow). This occurs because there is sometimes a lack of checks for invalid statements in an optional block.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-36087"
    },
    {
      "cve": "CVE-2021-36222",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ec_verify in kdc/kdc_preauth_ec.c in the Key Distribution Center (KDC) in MIT Kerberos 5 (aka krb5) before 1.18.4 and 1.19.x before 1.19.2 allows remote attackers to cause a NULL pointer dereference and daemon crash. This occurs because a return value is not properly managed in a certain situation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-36222"
    },
    {
      "cve": "CVE-2021-36690",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A segmentation fault can occur in the sqlite3.exe command-line component of SQLite 3.36.0 via the idxGetTableInfo function when there is a crafted SQL query. NOTE: the vendor disputes the relevance of this report because a sqlite3.exe user already has full privileges (e.g., is intentionally allowed to execute commands). This report does NOT imply any problem in the SQLite library.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-36690"
    },
    {
      "cve": "CVE-2021-37600",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer overflow in util-linux through 2.37.1 can potentially cause a buffer overflow if an attacker were able to use system resources in a way that leads to a large number in the /proc/sysvipc/sem file. NOTE: this is unexploitable in GNU C Library environments, and possibly in all realistic environments",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-37600"
    },
    {
      "cve": "CVE-2021-37750",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The Key Distribution Center (KDC) in MIT Kerberos 5 (aka krb5) before 1.18.5 and 1.19.x before 1.19.3 has a NULL pointer dereference in kdc/do_tgs_req.c via a FAST inner body that lacks a server field.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-37750"
    },
    {
      "cve": "CVE-2021-38604",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In librt in the GNU C Library (aka glibc) through 2.34, sysdeps/unix/sysv/linux/mq_notify.c mishandles certain NOTIFY_REMOVED data, leading to a NULL pointer dereference. NOTE: this vulnerability was introduced as a side effect of the CVE-2021-33574 fix.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-38604"
    },
    {
      "cve": "CVE-2021-41617",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "sshd in OpenSSH 6.2 through 8.x before 8.8, when certain non-default configurations are used, allows privilege escalation because supplemental groups are not initialized as expected. Helper programs for AuthorizedKeysCommand and AuthorizedPrincipalsCommand may run with privileges associated with group memberships of the sshd process, if the configuration specifies running the command as a different user.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-41617"
    },
    {
      "cve": "CVE-2021-43396",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "** DISPUTED ** In iconvdata/iso-2022-jp-3.c in the GNU C Library (aka glibc) 2.34, remote attackers can force iconv() to emit a spurious \u0027\\0\u0027 character via crafted ISO-2022-JP-3 data that is accompanied by an internal state reset. This may affect data integrity in certain iconv() use cases. NOTE: the vendor states \"the bug cannot be invoked through user input and requires iconv to be invoked with a NULL inbuf, which ought to require a separate application bug to do so unintentionally. Hence there\u0027s no security impact to the bug.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-43396"
    },
    {
      "cve": "CVE-2021-43618",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU Multiple Precision Arithmetic Library (GMP) through 6.2.1 has an mpz/inp_raw.c integer overflow and resultant buffer overflow via crafted input, leading to a segmentation fault on 32-bit platforms.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-43618"
    },
    {
      "cve": "CVE-2021-44879",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In gc_data_segment in fs/f2fs/gc.c in the Linux kernel before 5.16.3, special files are not considered, leading to a move_data_page NULL pointer dereference.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-44879"
    },
    {
      "cve": "CVE-2021-45960",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Expat (aka libexpat) before 2.4.3, a left shift by 29 (or more) places in the storeAtts function in xmlparse.c can lead to realloc misbehavior (e.g., allocating too few bytes, or only freeing memory).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-45960"
    },
    {
      "cve": "CVE-2021-46143",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In doProlog in xmlparse.c in Expat (aka libexpat) before 2.4.3, an integer overflow exists for m_groupSize.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-46143"
    },
    {
      "cve": "CVE-2021-46195",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GCC v12.0 was discovered to contain an uncontrolled recursion via the component libiberty/rust-demangle.c. This vulnerability allows attackers to cause a Denial of Service (DoS) by consuming excessive CPU and memory resources.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-46195"
    },
    {
      "cve": "CVE-2021-46828",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libtirpc before 1.3.3rc1, remote attackers could exhaust the file descriptors of a process that uses libtirpc because idle TCP connections are mishandled. This can, in turn, lead to an svc_run infinite loop without accepting new connections.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-46828"
    },
    {
      "cve": "CVE-2021-46848",
      "cwe": {
        "id": "CWE-193",
        "name": "Off-by-one Error"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU Libtasn1 before 4.19.0 has an ETYPE_OK off-by-one array size check that affects asn1_encode_simple_der.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2021-46848"
    },
    {
      "cve": "CVE-2022-0391",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in Python, specifically within the urllib.parse module. This module helps break Uniform Resource Locator (URL) strings into components. The issue involves how the urlparse method does not sanitize input and allows characters like \u0027\\r\u0027 and \u0027\\n\u0027 in the URL path. This flaw allows an attacker to input a crafted URL, leading to injection attacks. This flaw affects Python versions prior to 3.10.0b1, 3.9.5, 3.8.11, 3.7.11 and 3.6.14.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-0391"
    },
    {
      "cve": "CVE-2022-0563",
      "cwe": {
        "id": "CWE-209",
        "name": "Generation of Error Message Containing Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the util-linux chfn and chsh utilities when compiled with Readline support. The Readline library uses an \"INPUTRC\" environment variable to get a path to the library config file. When the library cannot parse the specified file, it prints an error message containing data from the file. This flaw allows an unprivileged user to read root-owned files, potentially leading to privilege escalation. This flaw affects util-linux versions prior to 2.37.4.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-0563"
    },
    {
      "cve": "CVE-2022-0778",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The BN_mod_sqrt() function in openSSL, which computes a modular square root, contains a bug that can cause it to loop forever for non-prime moduli. Internally this function is used when parsing certificates that contain elliptic curve public keys in compressed form or explicit elliptic curve parameters with a base point encoded in compressed form. It is possible to trigger the infinite loop by crafting a certificate that has invalid explicit curve parameters. Since certificate parsing happens prior to verification of the certificate signature, any process that parses an externally supplied certificate may thus be subject to a denial of service attack. The infinite loop can also be reached when parsing crafted private keys as they can contain explicit elliptic curve parameters.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-0778"
    },
    {
      "cve": "CVE-2022-1271",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An arbitrary file write vulnerability was found in GNU gzip\u0027s zgrep utility. When zgrep is applied on the attacker\u0027s chosen file name (for example, a crafted file name), this can overwrite an attacker\u0027s content to an arbitrary attacker-selected file. This flaw occurs due to insufficient validation when processing filenames with two or more newlines where selected content and the target file names are embedded in crafted multi-line file names. This flaw allows a remote, low privileged attacker to force zgrep to write arbitrary files on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-1271"
    },
    {
      "cve": "CVE-2022-1292",
      "cwe": {
        "id": "CWE-78",
        "name": "Improper Neutralization of Special Elements used in an OS Command (\u0027OS Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The c_rehash script does not properly sanitise shell metacharacters to prevent command injection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-1292"
    },
    {
      "cve": "CVE-2022-1304",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds read/write vulnerability was found in e2fsprogs 1.46.5. This issue leads to a segmentation fault and possibly arbitrary code execution via a specially crafted filesystem.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-1304"
    },
    {
      "cve": "CVE-2022-1343",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Under certain circumstances, the command line OCSP verify function reports successful verification when the verification in fact failed. In this case the incorrect successful response will also be accompanied by error messages showing the failure and contradicting the apparently successful result.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-1343"
    },
    {
      "cve": "CVE-2022-1434",
      "cwe": {
        "id": "CWE-327",
        "name": "Use of a Broken or Risky Cryptographic Algorithm"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When using the RC4-MD5 ciphersuite, which is disabled by default, an attacker is able to modify data in transit due to an incorrect use of the AAD data as the MAC key in OpenSSL 3.0. An attacker is not able to decrypt any communication.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-1434"
    },
    {
      "cve": "CVE-2022-1473",
      "cwe": {
        "id": "CWE-404",
        "name": "Improper Resource Shutdown or Release"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The used OpenSSL version improperly reuses memory when decoding certificates or keys. This can lead to a process termination and Denial of Service for long lived processes.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-1473"
    },
    {
      "cve": "CVE-2022-2068",
      "cwe": {
        "id": "CWE-78",
        "name": "Improper Neutralization of Special Elements used in an OS Command (\u0027OS Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In addition to the c_rehash shell command injection identified in CVE-2022-1292, further circumstances where the c_rehash script does not properly sanitise shell metacharacters to prevent command injection were found by code review. When the CVE-2022-1292 was fixed it was not discovered that there are other places in the script where the file names of certificates being hashed were possibly passed to a command executed through the shell. This script is distributed by some operating systems in a manner where it is automatically executed. On such operating systems, an attacker could execute arbitrary commands with the privileges of the script. Use of the c_rehash script is considered obsolete and should be replaced by the OpenSSL rehash command line tool.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-2068"
    },
    {
      "cve": "CVE-2022-2097",
      "cwe": {
        "id": "CWE-326",
        "name": "Inadequate Encryption Strength"
      },
      "notes": [
        {
          "category": "summary",
          "text": "AES OCB mode for 32-bit x86 platforms using the AES-NI assembly optimised implementation will not encrypt the entirety of the data under some circumstances. This could reveal sixteen bytes of data that was preexisting in the memory that wasn\u0027t written. In the special case of \"in place\" encryption, sixteen bytes of the plaintext would be revealed. Since OpenSSL does not support OCB based cipher suites for TLS and DTLS, they are both unaffected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-2097"
    },
    {
      "cve": "CVE-2022-2274",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The OpenSSL 3.0.4 release introduced a serious bug in the RSA implementation for X86_64 CPUs supporting the AVX512IFMA instructions. This issue makes the RSA implementation with 2048 bit private keys incorrect on such machines and memory corruption will happen during the computation. As a consequence of the memory corruption an attacker may be able to trigger a remote code execution on the machine performing the computation. SSL/TLS servers or other servers using 2048 bit RSA private keys running on machines supporting AVX512IFMA instructions of the X86_64 architecture are affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-2274"
    },
    {
      "cve": "CVE-2022-2509",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability found in gnutls. This security flaw happens because of a double free error occurs during verification of pkcs7 signatures in gnutls_pkcs7_verify function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-2509"
    },
    {
      "cve": "CVE-2022-3715",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the bash package, where a heap-buffer overflow can occur in valid parameter_transform. This issue may lead to memory problems.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-3715"
    },
    {
      "cve": "CVE-2022-3821",
      "cwe": {
        "id": "CWE-193",
        "name": "Off-by-one Error"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An off-by-one Error issue was discovered in Systemd in format_timespan() function of time-util.c. An attacker could supply specific values for time and accuracy that leads to buffer overrun in format_timespan(), leading to a Denial of Service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-3821"
    },
    {
      "cve": "CVE-2022-4304",
      "cwe": {
        "id": "CWE-326",
        "name": "Inadequate Encryption Strength"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A timing based side channel exists in the OpenSSL RSA Decryption implementation which could be sufficient to recover a plaintext across a network in a Bleichenbacher style attack. To achieve a successful decryption an attacker would have to be able to send a very large number of trial messages for decryption. The vulnerability affects all RSA padding modes: PKCS#1 v1.5, RSA-OEAP and RSASVE. For example, in a TLS connection, RSA is commonly used by a client to send an encrypted pre-master secret to the server. An attacker that had observed a genuine connection between a client and a server could use this flaw to send trial messages to the server and record the time taken to process them. After a sufficiently large number of messages the attacker could recover the pre-master secret used for the original connection and thus be able to decrypt the application data sent over that connection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-4304"
    },
    {
      "cve": "CVE-2022-4450",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The function PEM_read_bio_ex() reads a PEM file from a BIO and parses and decodes the \"name\" (e.g. \"CERTIFICATE\"), any header data and the payload data. If the function succeeds then the \"name_out\", \"header\" and \"data\" arguments are populated with pointers to buffers containing the relevant decoded data. The caller is responsible for freeing those buffers. It is possible to construct a PEM file that results in 0 bytes of payload data. In this case PEM_read_bio_ex() will return a failure code but will populate the header argument with a pointer to a buffer that has already been freed. If the caller also frees this buffer then a double free will occur. This will most likely lead to a crash. This could be exploited by an attacker who has the ability to supply malicious PEM files for parsing to achieve a denial of service attack. The functions PEM_read_bio() and PEM_read() are simple wrappers around PEM_read_bio_ex() and therefore these functions are also directly affected. These functions are also called indirectly by a number of other OpenSSL functions including PEM_X509_INFO_read_bio_ex() and SSL_CTX_use_serverinfo_file() which are also vulnerable. Some OpenSSL internal uses of these functions are not vulnerable because the caller does not free the header argument if PEM_read_bio_ex() returns a failure code. These locations include the PEM_read_bio_TYPE() functions as well as the decoders introduced in OpenSSL 3.0. The OpenSSL asn1parse command line application is also impacted by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-4450"
    },
    {
      "cve": "CVE-2022-22576",
      "cwe": {
        "id": "CWE-287",
        "name": "Improper Authentication"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S), IMAP(S), POP3(S) and LDAP(S) (openldap only).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-22576"
    },
    {
      "cve": "CVE-2022-22822",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "addBinding in xmlparse.c in Expat (aka libexpat) before 2.4.3 has an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-22822"
    },
    {
      "cve": "CVE-2022-22823",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "build_model in xmlparse.c in Expat (aka libexpat) before 2.4.3 has an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-22823"
    },
    {
      "cve": "CVE-2022-22824",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "defineAttribute in xmlparse.c in Expat (aka libexpat) before 2.4.3 has an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-22824"
    },
    {
      "cve": "CVE-2022-22825",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "lookup in xmlparse.c in Expat (aka libexpat) before 2.4.3 has an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-22825"
    },
    {
      "cve": "CVE-2022-22826",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nextScaffoldPart in xmlparse.c in Expat (aka libexpat) before 2.4.3 has an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-22826"
    },
    {
      "cve": "CVE-2022-22827",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "storeAtts in xmlparse.c in Expat (aka libexpat) before 2.4.3 has an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-22827"
    },
    {
      "cve": "CVE-2022-23218",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The deprecated compatibility function svcunix_create in the sunrpc module of the GNU C Library (aka glibc) through 2.34 copies its path argument on the stack without validating its length, which may result in a buffer overflow, potentially resulting in a denial of service or (if an application is not built with a stack protector enabled) arbitrary code execution.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-23218"
    },
    {
      "cve": "CVE-2022-23219",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The deprecated compatibility function clnt_create in the sunrpc module of the GNU C Library (aka glibc) through 2.34 copies its hostname argument on the stack without validating its length, which may result in a buffer overflow, potentially resulting in a denial of service or (if an application is not built with a stack protector enabled) arbitrary code execution.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-23219"
    },
    {
      "cve": "CVE-2022-23308",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "valid.c in libxml2 before 2.9.13 has a use-after-free of ID and IDREF attributes.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-23308"
    },
    {
      "cve": "CVE-2022-23852",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Expat (aka libexpat) before 2.4.4 has a signed integer overflow in XML_GetBuffer, for configurations with a nonzero XML_CONTEXT_BYTES.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-23852"
    },
    {
      "cve": "CVE-2022-23990",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Expat (aka libexpat) before 2.4.4 has an integer overflow in the doProlog function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-23990"
    },
    {
      "cve": "CVE-2022-24407",
      "cwe": {
        "id": "CWE-89",
        "name": "Improper Neutralization of Special Elements used in an SQL Command (\u0027SQL Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Cyrus SASL 2.1.17 through 2.1.27 before 2.1.28, plugins/sql.c does not escape the password for a SQL INSERT or UPDATE statement.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-24407"
    },
    {
      "cve": "CVE-2022-25235",
      "cwe": {
        "id": "CWE-116",
        "name": "Improper Encoding or Escaping of Output"
      },
      "notes": [
        {
          "category": "summary",
          "text": "xmltok_impl.c in Expat (aka libexpat) before 2.4.5 lacks certain validation of encoding, such as checks for whether a UTF-8 character is valid in a certain context.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-25235"
    },
    {
      "cve": "CVE-2022-25236",
      "cwe": {
        "id": "CWE-668",
        "name": "Exposure of Resource to Wrong Sphere"
      },
      "notes": [
        {
          "category": "summary",
          "text": "xmlparse.c in Expat (aka libexpat) before 2.4.5 allows attackers to insert namespace-separator characters into namespace URIs.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-25236"
    },
    {
      "cve": "CVE-2022-25313",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Expat (aka libexpat) before 2.4.5, an attacker can trigger stack exhaustion in build_model via a large nesting depth in the DTD element.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-25313"
    },
    {
      "cve": "CVE-2022-25314",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Expat (aka libexpat) before 2.4.5, there is an integer overflow in copyString.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-25314"
    },
    {
      "cve": "CVE-2022-25315",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Expat (aka libexpat) before 2.4.5, there is an integer overflow in storeRawNames.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-25315"
    },
    {
      "cve": "CVE-2022-26488",
      "cwe": {
        "id": "CWE-426",
        "name": "Untrusted Search Path"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Python before 3.10.3 on Windows, local users can gain privileges because the search path is inadequately secured. The installer may allow a local attacker to add user-writable directories to the system search path. To exploit, an administrator must have installed Python for all users and enabled PATH entries. A non-administrative user can trigger a repair that incorrectly adds user-writable paths into PATH, enabling search-path hijacking of other users and system services. This affects Python (CPython) through 3.7.12, 3.8.x through 3.8.12, 3.9.x through 3.9.10, and 3.10.x through 3.10.2.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-26488"
    },
    {
      "cve": "CVE-2022-27774",
      "cwe": {
        "id": "CWE-522",
        "name": "Insufficiently Protected Credentials"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with authentication could leak credentials to other services that exist on different protocols or port numbers.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:R/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-27774"
    },
    {
      "cve": "CVE-2022-27775",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An information disclosure vulnerability exists in curl 7.65.0 to 7.82.0 are vulnerable that by using an IPv6 address that was in the connection pool but with a different zone id it could reuse a connection instead.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-27775"
    },
    {
      "cve": "CVE-2022-27776",
      "cwe": {
        "id": "CWE-522",
        "name": "Insufficiently Protected Credentials"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or cookie header data on HTTP redirects to the same host but another port number.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-27776"
    },
    {
      "cve": "CVE-2022-27778",
      "cwe": {
        "id": "CWE-706",
        "name": "Use of Incorrectly-Resolved Name or Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use of incorrectly resolved name vulnerability fixed in 7.83.1 might remove the wrong file when `--no-clobber` is used together with `--remove-on-error`.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-27778"
    },
    {
      "cve": "CVE-2022-27779",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl wrongly allows cookies to be set for Top Level Domains (TLDs) if thehost name is provided with a trailing dot.curl can be told to receive and send cookies. curl\u0027s \"cookie engine\" can bebuilt with or without [Public Suffix List](https://publicsuffix.org/)awareness. If PSL support not provided, a more rudimentary check exists to atleast prevent cookies from being set on TLDs. This check was broken if thehost name in the URL uses a trailing dot.This can allow arbitrary sites to set cookies that then would get sent to adifferent and unrelated site or domain.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-27779"
    },
    {
      "cve": "CVE-2022-27780",
      "cwe": {
        "id": "CWE-918",
        "name": "Server-Side Request Forgery (SSRF)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The curl URL parser wrongly accepts percent-encoded URL separators like \u0027/\u0027when decoding the host name part of a URL, making it a *different* URL usingthe wrong host name when it is later retrieved.For example, a URL like `http://example.com%2F127.0.0.1/`, would be allowed bythe parser and get transposed into `http://example.com/127.0.0.1/`. This flawcan be used to circumvent filters, checks and more.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-27780"
    },
    {
      "cve": "CVE-2022-27781",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl provides the `CURLOPT_CERTINFO` option to allow applications torequest details to be returned about a server\u0027s certificate chain.Due to an erroneous function, a malicious server could make libcurl built withNSS get stuck in a never-ending busy-loop when trying to retrieve thatinformation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-27781"
    },
    {
      "cve": "CVE-2022-27782",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl would reuse a previously created connection even when a TLS or SSHrelated option had been changed that should have prohibited reuse.libcurl keeps previously used connections in a connection pool for subsequenttransfers to reuse if one of them matches the setup. However, several TLS andSSH settings were left out from the configuration match checks, making themmatch too easily.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-27782"
    },
    {
      "cve": "CVE-2022-27943",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libiberty/rust-demangle.c in GNU GCC 11.2 allows stack consumption in demangle_const, as demonstrated by nm-new.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-27943"
    },
    {
      "cve": "CVE-2022-28321",
      "cwe": {
        "id": "CWE-287",
        "name": "Improper Authentication"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The Linux-PAM package before 1.5.2-6.1 for openSUSE Tumbleweed allows authentication bypass for SSH logins. The pam_access.so module doesn\u0027t correctly restrict login if a user tries to connect from an IP address that is not resolvable via DNS. In such conditions, a user with denied access to a machine can still get access. NOTE: the relevance of this issue is largely limited to openSUSE Tumbleweed and openSUSE Factory; it does not affect Linux-PAM upstream.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-28321"
    },
    {
      "cve": "CVE-2022-29155",
      "cwe": {
        "id": "CWE-89",
        "name": "Improper Neutralization of Special Elements used in an SQL Command (\u0027SQL Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In OpenLDAP 2.x before 2.5.12 and 2.6.x before 2.6.2, a SQL injection vulnerability exists in the experimental back-sql backend to slapd, via a SQL statement within an LDAP query. This can occur during an LDAP search operation when the search filter is processed, due to a lack of proper escaping.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-29155"
    },
    {
      "cve": "CVE-2022-29824",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libxml2 before 2.9.14, several buffer handling functions in buf.c (xmlBuf*) and tree.c (xmlBuffer*) don\u0027t check for integer overflows. This can result in out-of-bounds memory writes. Exploitation requires a victim to open a crafted, multi-gigabyte XML file. Other software using libxml2\u0027s buffer functions, for example libxslt through 1.1.35, is affected as well.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-29824"
    },
    {
      "cve": "CVE-2022-30115",
      "cwe": {
        "id": "CWE-319",
        "name": "Cleartext Transmission of Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Using its HSTS support, curl can be instructed to use HTTPS directly insteadof using an insecure clear-text HTTP step even when HTTP is provided in theURL. This mechanism could be bypassed if the host name in the given URL used atrailing dot while not using one when it built the HSTS cache. Or the otherway around - by having the trailing dot in the HSTS cache and *not* using thetrailing dot in the URL.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-30115"
    },
    {
      "cve": "CVE-2022-32205",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A malicious server can serve excessive amounts of \"Set-Cookie:\" headers in a HTTP response to curl and curl \u003c 7.84.0 stores all of them. A sufficiently large amount of (big) cookies make subsequent HTTP requests to this, or other servers to which the cookies match, create requests that become larger than the threshold that curl uses internally to avoid sending crazy large requests (1048576 bytes) and instead returns an error.This denial state might remain for as long as the same cookies are kept, match and haven\u0027t expired. Due to cookie matching rules, a server on \"foo.example.com\" can set cookies that also would match for \"bar.example.com\", making it it possible for a \"sister server\" to effectively cause a denial of service for a sibling site on the same second level domain using this method.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-32205"
    },
    {
      "cve": "CVE-2022-32206",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl \u003c 7.84.0 supports \"chained\" HTTP compression algorithms, meaning that a serverresponse can be compressed multiple times and potentially with different algorithms. The number of acceptable \"links\" in this \"decompression chain\" was unbounded, allowing a malicious server to insert a virtually unlimited number of compression steps.The use of such a decompression chain could result in a \"malloc bomb\", makingcurl end up spending enormous amounts of allocated heap memory, or trying toand returning out of memory errors.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-32206"
    },
    {
      "cve": "CVE-2022-32207",
      "cwe": {
        "id": "CWE-276",
        "name": "Incorrect Default Permissions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl \u003c 7.84.0 saves cookies, alt-svc and hsts data to local files, it makes the operation atomic by finalizing the operation with a rename from a temporary name to the final target file name.In that rename operation, it might accidentally *widen* the permissions for the target file, leaving the updated file accessible to more users than intended.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-32207"
    },
    {
      "cve": "CVE-2022-32208",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl \u003c 7.84.0 does FTP transfers secured by krb5, it handles message verification failures wrongly. This flaw makes it possible for a Man-In-The-Middle attack to go unnoticed and even allows it to inject data to the client.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-32208"
    },
    {
      "cve": "CVE-2022-32221",
      "cwe": {
        "id": "CWE-440",
        "name": "Expected Behavior Violation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When doing HTTP(S) transfers, libcurl might erroneously use the read callback (`CURLOPT_READFUNCTION`) to ask for data to send, even when the `CURLOPT_POSTFIELDS` option has been set, if the same handle previously was used to issue a `PUT` request which used that callback. This flaw may surprise the application and cause it to misbehave and either send off the wrong data or use memory after free or similar in the subsequent `POST` request. The problem exists in the logic for a reused handle when it is changed from a PUT to a POST.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.2,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-32221"
    },
    {
      "cve": "CVE-2022-35252",
      "cwe": {
        "id": "CWE-1286",
        "name": "Improper Validation of Syntactic Correctness of Input"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl is used to retrieve and parse cookies from a HTTP(S) server, itaccepts cookies using control codes that when later are sent back to a HTTPserver might make the server return 400 responses. Effectively allowing a\"sister site\" to deny service to all siblings.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-35252"
    },
    {
      "cve": "CVE-2022-35260",
      "cwe": {
        "id": "CWE-121",
        "name": "Stack-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl can be told to parse a `.netrc` file for credentials. If that file endsin a line with 4095 consecutive non-white space letters and no newline, curlwould first read past the end of the stack-based buffer, and if the readworks, write a zero byte beyond its boundary.This will in most cases cause a segfault or similar, but circumstances might also cause different outcomes.If a malicious user can provide a custom netrc file to an application or otherwise affect its contents, this flaw could be used as denial-of-service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.6,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-35260"
    },
    {
      "cve": "CVE-2022-35737",
      "cwe": {
        "id": "CWE-129",
        "name": "Improper Validation of Array Index"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite 1.0.12 through 3.39.x before 3.39.2 sometimes allows an array-bounds overflow if billions of bytes are used in a string argument to a C API.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-35737"
    },
    {
      "cve": "CVE-2022-37434",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "zlib through 1.2.12 has a heap-based buffer over-read or buffer overflow in inflate in inflate.c via a large gzip header extra field. NOTE: only applications that call inflateGetHeader are affected. Some common applications bundle the affected zlib source code but may be unable to call inflateGetHeader (e.g., see the nodejs/node reference).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-37434"
    },
    {
      "cve": "CVE-2022-37454",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The Keccak XKCP SHA-3 reference implementation before fdc6fef has an integer overflow and resultant buffer overflow that allows attackers to execute arbitrary code or eliminate expected cryptographic properties. This occurs in the sponge function interface.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-37454"
    },
    {
      "cve": "CVE-2022-40303",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.10.3. When parsing a multi-gigabyte XML document with the XML_PARSE_HUGE parser option enabled, several integer counters can overflow. This results in an attempt to access an array at a negative 2GB offset, typically leading to a segmentation fault.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-40303"
    },
    {
      "cve": "CVE-2022-40304",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.10.3. Certain invalid XML entity definitions can corrupt a hash table key, potentially leading to subsequent logic errors. In one case, a double-free can be provoked.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-40304"
    },
    {
      "cve": "CVE-2022-40674",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libexpat before 2.4.9 has a use-after-free in the doContent function in xmlparse.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-40674"
    },
    {
      "cve": "CVE-2022-42898",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "PAC parsing in MIT Kerberos 5 (aka krb5) before 1.19.4 and 1.20.x before 1.20.1 has integer overflows that may lead to remote code execution (in KDC, kadmind, or a GSS or Kerberos application server) on 32-bit platforms (which have a resultant heap-based buffer overflow), and cause a denial of service on other platforms. This occurs in krb5_pac_parse in lib/krb5/krb/pac.c. Heimdal before 7.7.1 has \"a similar bug.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-42898"
    },
    {
      "cve": "CVE-2022-42915",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl before 7.86.0 has a double free. If curl is told to use an HTTP proxy for a transfer with a non-HTTP(S) URL, it sets up the connection to the remote server by issuing a CONNECT request to the proxy, and then tunnels the rest of the protocol through. An HTTP proxy might refuse this request (HTTP proxies often only allow outgoing connections to specific port numbers, like 443 for HTTPS) and instead return a non-200 status code to the client. Due to flaws in the error/cleanup handling, this could trigger a double free in curl if one of the following schemes were used in the URL for the transfer: dict, gopher, gophers, ldap, ldaps, rtmp, rtmps, or telnet. The earliest affected version is 7.77.0.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-42915"
    },
    {
      "cve": "CVE-2022-42916",
      "cwe": {
        "id": "CWE-319",
        "name": "Cleartext Transmission of Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In curl before 7.86.0, the HSTS check could be bypassed to trick it into staying with HTTP. Using its HSTS support, curl can be instructed to use HTTPS directly (instead of using an insecure cleartext HTTP step) even when HTTP is provided in the URL. This mechanism could be bypassed if the host name in the given URL uses IDN characters that get replaced with ASCII counterparts as part of the IDN conversion, e.g., using the character UTF-8 U+3002 (IDEOGRAPHIC FULL STOP) instead of the common ASCII full stop of U+002E (.). The earliest affected version is 7.77.0 2021-05-26.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-42916"
    },
    {
      "cve": "CVE-2022-43551",
      "cwe": {
        "id": "CWE-319",
        "name": "Cleartext Transmission of Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability exists in curl \u003c7.87.0 HSTS check that could be bypassed to trick it to keep using HTTP. Using its HSTS support, curl can be instructed to use HTTPS instead of using an insecure clear-text HTTP step even when HTTP is provided in the URL. However, the HSTS mechanism could be bypassed if the host name in the given URL first uses IDN characters that get replaced to ASCII counterparts as part of the IDN conversion. Like using the character UTF-8 U+3002 (IDEOGRAPHIC FULL STOP) instead of the common ASCII full stop U+002E (.). Then in a subsequent request, it does not detect the HSTS state and makes a clear text transfer. Because it would store the info IDN encoded but look for it IDN decoded.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-43551"
    },
    {
      "cve": "CVE-2022-43552",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl can be asked to tunnel virtually all protocols it supports through an HTTP proxy. HTTP proxies can (and often do) deny such tunnel operations using an appropriate HTTP error response code. When getting denied to tunnel the specific protocols SMB or TELNET, curl would use a heap-allocated struct after it had been freed, in its transfer shutdown code path.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-43552"
    },
    {
      "cve": "CVE-2022-43680",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libexpat through 2.4.9, there is a use-after free caused by overeager destruction of a shared DTD in XML_ExternalEntityParserCreate in out-of-memory situations.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-43680"
    },
    {
      "cve": "CVE-2022-45061",
      "cwe": {
        "id": "CWE-407",
        "name": "Inefficient Algorithmic Complexity"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in Python before 3.11.1. An unnecessary quadratic algorithm exists in one path when processing some inputs to the IDNA (RFC 3490) decoder, such that a crafted, unreasonably long name being presented to the decoder could lead to a CPU denial of service. Hostnames are often supplied by remote servers that could be controlled by a malicious actor; in such a scenario, they could trigger excessive CPU consumption on the client attempting to make use of an attacker-supplied supposed hostname. For example, the attack payload could be placed in the Location header of an HTTP response with status code 302. A fix is planned in 3.11.1, 3.10.9, 3.9.16, 3.8.16, and 3.7.16.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-45061"
    },
    {
      "cve": "CVE-2022-45873",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "systemd 250 and 251 allows local users to achieve a systemd-coredump deadlock by triggering a crash that has a long backtrace. This occurs in parse_elf_object in shared/elf-util.c. The exploitation methodology is to crash a binary calling the same function recursively, and put it in a deeply nested directory to make its backtrace large enough to cause the deadlock. This must be done 16 times when MaxConnections=16 is set for the systemd/units/systemd-coredump.socket file.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-45873"
    },
    {
      "cve": "CVE-2022-46908",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite through 3.40.0, when relying on --safe for execution of an untrusted CLI script, does not properly implement the azProhibitedFunctions protection mechanism, and instead allows UDF functions such as WRITEFILE.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.3,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-46908"
    },
    {
      "cve": "CVE-2022-48303",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU Tar through 1.34 has a one-byte out-of-bounds read that results in use of uninitialized memory for a conditional jump. Exploitation to change the flow of control has not been demonstrated. The issue occurs in from_header in list.c via a V7 archive in which mtime has approximately 11 whitespace characters.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-48303"
    },
    {
      "cve": "CVE-2022-48522",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Perl 5.34.0, function S_find_uninit_var in sv.c has a stack-based crash that can lead to remote code execution or local privilege escalation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-48522"
    },
    {
      "cve": "CVE-2022-48560",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free exists in Python through 3.9 via heappushpop in heapq.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2022-48560"
    },
    {
      "cve": "CVE-2023-0215",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The public API function BIO_new_NDEF is a helper function used for streaming ASN.1 data via a BIO. It is primarily used internally to OpenSSL to support the SMIME, CMS and PKCS7 streaming capabilities, but may also be called directly by end user applications. The function receives a BIO from the caller, prepends a new BIO_f_asn1 filter BIO onto the front of it to form a BIO chain, and then returns the new head of the BIO chain to the caller. Under certain conditions, for example if a CMS recipient public key is invalid, the new filter BIO is freed and the function returns a NULL result indicating a failure. However, in this case, the BIO chain is not properly cleaned up and the BIO passed by the caller still retains internal pointers to the previously freed filter BIO. If the caller then goes on to call BIO_pop() on the BIO then a use-after-free will occur. This will most likely result in a crash. This scenario occurs directly in the internal function B64_write_ASN1() which may cause BIO_new_NDEF() to be called and will subsequently call BIO_pop() on the BIO. This internal function is in turn called by the public API functions PEM_write_bio_ASN1_stream, PEM_write_bio_CMS_stream, PEM_write_bio_PKCS7_stream, SMIME_write_ASN1, SMIME_write_CMS and SMIME_write_PKCS7. Other public API functions that may be impacted by this include i2d_ASN1_bio_stream, BIO_new_CMS, BIO_new_PKCS7, i2d_CMS_bio_stream and i2d_PKCS7_bio_stream. The OpenSSL cms and smime command line applications are similarly affected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-0215"
    },
    {
      "cve": "CVE-2023-0286",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a type confusion vulnerability relating to X.400 address processing inside an X.509 GeneralName. X.400 addresses were parsed as an ASN1_STRING but the public structure definition for GENERAL_NAME incorrectly specified the type of the x400Address field as ASN1_TYPE. This field is subsequently interpreted by the OpenSSL function GENERAL_NAME_cmp as an ASN1_TYPE rather than an ASN1_STRING. When CRL checking is enabled (i.e. the application sets the X509_V_FLAG_CRL_CHECK flag), this vulnerability may allow an attacker to pass arbitrary pointers to a memcmp call, enabling them to read memory contents or enact a denial of service. In most cases, the attack requires the attacker to provide both the certificate chain and CRL, neither of which need to have a valid signature. If the attacker only controls one of these inputs, the other input must already contain an X.400 address as a CRL distribution point, which is uncommon. As such, this vulnerability is most likely to only affect applications which have implemented their own functionality for retrieving CRLs over a network.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-0286"
    },
    {
      "cve": "CVE-2023-0361",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A timing side-channel in the handling of RSA ClientKeyExchange messages was discovered in GnuTLS. This side-channel can be sufficient to recover the key encrypted in the RSA ciphertext across a network in a Bleichenbacher style attack. To achieve a successful decryption the attacker would need to send a large amount of specially crafted messages to the vulnerable server. By recovering the secret from the ClientKeyExchange message, the attacker would be able to decrypt the application data exchanged over that connection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-0361"
    },
    {
      "cve": "CVE-2023-0464",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A security vulnerability has been identified in all supported versions of OpenSSL related to the verification of X.509 certificate chains that include policy constraints. Attackers may be able to exploit this vulnerability by creating a malicious certificate chain that triggers exponential use of computational resources, leading to a denial-of-service (DoS) attack on affected systems.\r\n\r\nPolicy processing is disabled by default but can be enabled by passing the `-policy` argument to the command line utilities or by calling the `X509_VERIFY_PARAM_set1_policies()` function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-0464"
    },
    {
      "cve": "CVE-2023-0465",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Applications that use a non-default option when verifying certificates may be\r\nvulnerable to an attack from a malicious CA to circumvent certain checks.\r\n\r\nInvalid certificate policies in leaf certificates are silently ignored by\r\nOpenSSL and other certificate policy checks are skipped for that certificate.\r\nA malicious CA could use this to deliberately assert invalid certificate policies\r\nin order to circumvent policy checking on the certificate altogether.\r\n\r\nPolicy processing is disabled by default but can be enabled by passing\r\nthe `-policy` argument to the command line utilities or by calling the\r\n`X509_VERIFY_PARAM_set1_policies()` function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-0465"
    },
    {
      "cve": "CVE-2023-0466",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The function X509_VERIFY_PARAM_add0_policy() is documented to\nimplicitly enable the certificate policy check when doing certificate\nverification. However the implementation of the function does not\nenable the check which allows certificates with invalid or incorrect\npolicies to pass the certificate verification.\n\nAs suddenly enabling the policy check could break existing deployments it was\ndecided to keep the existing behavior of the X509_VERIFY_PARAM_add0_policy()\nfunction.\n\nInstead the applications that require OpenSSL to perform certificate\npolicy check need to use X509_VERIFY_PARAM_set1_policies() or explicitly\nenable the policy check by calling X509_VERIFY_PARAM_set_flags() with\nthe X509_V_FLAG_POLICY_CHECK flag argument.\n\nCertificate policy checks are disabled by default in OpenSSL and are not\ncommonly used by applications.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-0466"
    },
    {
      "cve": "CVE-2023-0687",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in GNU C Library 2.38. It has been declared as critical. This vulnerability affects the function __monstartup of the file gmon.c of the component Call Graph Monitor. The manipulation leads to buffer overflow. It is recommended to apply a patch to fix this issue. VDB-220246 is the identifier assigned to this vulnerability. NOTE: The real existence of this vulnerability is still doubted at the moment. The inputs that induce this vulnerability are basically addresses of the running application that is built with gmon enabled. It\u0027s basically trusted input or input that needs an actual security flaw to be compromised or controlled.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.6,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:A/AC:H/PR:L/UI:N/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-0687"
    },
    {
      "cve": "CVE-2023-1077",
      "cwe": {
        "id": "CWE-843",
        "name": "Access of Resource Using Incompatible Type (\u0027Type Confusion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, pick_next_rt_entity() may return a type confused entry, not detected by the BUG_ON condition, as the confused entry will not be NULL, but list_head.The buggy error condition would lead to a type confused entry with the list head,which would then be used as a type confused sched_rt_entity,causing memory corruption.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-1077"
    },
    {
      "cve": "CVE-2023-1206",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A hash collision flaw was found in the IPv6 connection lookup table in the Linux kernel\u2019s IPv6 functionality when a user makes a new kind of SYN flood attack. A user located in the local network or with a high bandwidth connection can increase the CPU usage of the server that accepts IPV6 connections up to 95%.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-1206"
    },
    {
      "cve": "CVE-2023-2650",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Processing some specially crafted ASN.1 object identifiers or data containing them may be very slow. Impact summary: Applications that use OBJ_obj2txt() directly, or use any of the OpenSSL subsystems OCSP, PKCS7/SMIME, CMS, CMP/CRMF or TS with no message size limit may experience notable to very long delays when processing those messages, which may lead to a Denial of Service. An OBJECT IDENTIFIER is composed of a series of numbers - sub-identifiers - most of which have no size limit. OBJ_obj2txt() may be used to translate an ASN.1 OBJECT IDENTIFIER given in DER encoding form (using the OpenSSL type ASN1_OBJECT) to its canonical numeric text form, which are the sub-identifiers of the OBJECT IDENTIFIER in decimal form, separated by periods. When one of the sub-identifiers in the OBJECT IDENTIFIER is very large (these are sizes that are seen as absurdly large, taking up tens or hundreds of KiBs), the translation to a decimal number in text may take a very long time. The time complexity is O(square(n)) with \u0027n\u0027 being the size of the sub-identifiers in bytes (*). With OpenSSL 3.0, support to fetch cryptographic algorithms using names / identifiers in string form was introduced. This includes using OBJECT IDENTIFIERs in canonical numeric text form as identifiers for fetching algorithms. Such OBJECT IDENTIFIERs may be received through the ASN.1 structure AlgorithmIdentifier, which is commonly used in multiple protocols to specify what cryptographic algorithm should be used to sign or verify, encrypt or decrypt, or digest passed data. Applications that call OBJ_obj2txt() directly with untrusted data are affected, with any version of OpenSSL. If the use is for the mere purpose of display, the severity is considered low. In OpenSSL 3.0 and newer, this affects the subsystems OCSP, PKCS7/SMIME, CMS, CMP/CRMF or TS. It also impacts anything that processes X.509 certificates, including simple things like verifying its signature. The impact on TLS is relatively low, because all versions of OpenSSL have a 100KiB limit on the peer\u0027s certificate chain. Additionally, this only impacts clients, or servers that have explicitly enabled client authentication. In OpenSSL 1.1.1 and 1.0.2, this only affects displaying diverse objects, such as X.509 certificates. This is assumed to not happen in such a way that it would cause a Denial of Service, so these versions are considered not affected by this issue in such a way that it would be cause for concern, and the severity is therefore considered low.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-2650"
    },
    {
      "cve": "CVE-2023-2953",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in openldap. This security flaw causes a null pointer dereference in ber_memalloc_x() function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-2953"
    },
    {
      "cve": "CVE-2023-3212",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer dereference issue was found in the gfs2 file system in the Linux kernel. It occurs on corrupt gfs2 file systems when the evict code tries to reference the journal descriptor structure after it has been freed and set to NULL. A privileged local user could use this flaw to cause a kernel panic.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-3212"
    },
    {
      "cve": "CVE-2023-3446",
      "cwe": {
        "id": "CWE-1333",
        "name": "Inefficient Regular Expression Complexity"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. One of those checks confirms that the modulus (\u0027p\u0027 parameter) is not too large. Trying to use a very large modulus is slow and OpenSSL will not normally use a modulus which is over 10,000 bits in length. However the DH_check() function checks numerous aspects of the key or parameters that have been supplied. Some of those checks use the supplied modulus value even if it has already been found to be too large. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulernable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the \u0027-check\u0027 option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-3446"
    },
    {
      "cve": "CVE-2023-3609",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s net/sched: cls_u32 component can be exploited to achieve local privilege escalation.\r\n\r\nIf tcf_change_indev() fails, u32_set_parms() will immediately return an error after incrementing or decrementing the reference counter in tcf_bind_filter(). If an attacker can control the reference counter and set it to zero, they can cause the reference to be freed, leading to a use-after-free vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-3609"
    },
    {
      "cve": "CVE-2023-3611",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds write vulnerability in the Linux kernel\u0027s net/sched: sch_qfq component can be exploited to achieve local privilege escalation.\r\n\r\nThe qfq_change_agg() function in net/sched/sch_qfq.c allows an out-of-bounds write because lmax is updated according to packet sizes without bounds checks.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-3611"
    },
    {
      "cve": "CVE-2023-3772",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel\u0027s IP framework for transforming packets (XFRM subsystem). This issue may allow a malicious user with CAP_NET_ADMIN privileges to directly dereference a NULL pointer in xfrm_update_ae_params(), leading to a possible kernel crash and denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-3772"
    },
    {
      "cve": "CVE-2023-3817",
      "cwe": {
        "id": "CWE-834",
        "name": "Excessive Iteration"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. After fixing CVE-2023-3446 it was discovered that a large q parameter value can also trigger an overly long computation during some of these checks. A correct q value, if present, cannot be larger than the modulus p parameter, thus it is unnecessary to perform these checks if q is larger than p. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the \"-check\" option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-3817"
    },
    {
      "cve": "CVE-2023-4016",
      "cwe": {
        "id": "CWE-122",
        "name": "Heap-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Under some circumstances, this weakness allows a user who has access to run the \u201cps\u201d utility on a machine, the ability to write almost unlimited amounts of unfiltered data into the process heap.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 2.5,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-4016"
    },
    {
      "cve": "CVE-2023-4039",
      "cwe": {
        "id": "CWE-693",
        "name": "Protection Mechanism Failure"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A failure in the -fstack-protector feature in GCC-based toolchains \nthat target AArch64 allows an attacker to exploit an existing buffer \noverflow in dynamically-sized local variables in your application \nwithout this being detected. This stack-protector failure only applies \nto C99-style dynamically-sized local variables or those created using \nalloca(). The stack-protector operates as intended for statically-sized \nlocal variables.\n\nThe default behavior when the stack-protector \ndetects an overflow is to terminate your application, resulting in \ncontrolled loss of availability. An attacker who can exploit a buffer \noverflow without triggering the stack-protector might be able to change \nprogram flow control to cause an uncontrolled loss of availability or to\n go further and affect confidentiality or integrity.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.8,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-4039"
    },
    {
      "cve": "CVE-2023-4527",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in glibc. When the getaddrinfo function is called with the AF_UNSPEC address family and the system is configured with no-aaaa mode via /etc/resolv.conf, a DNS response via TCP larger than 2048 bytes can potentially disclose stack contents through the function returned address data, and may cause a crash.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-4527"
    },
    {
      "cve": "CVE-2023-4623",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s net/sched: sch_hfsc (HFSC qdisc traffic control) component can be exploited to achieve local privilege escalation.\n\nIf a class with a link-sharing curve (i.e. with the HFSC_FSC flag set) has a parent without a link-sharing curve, then init_vf() will call vttree_insert() on the parent, but vttree_remove() will be skipped in update_vf(). This leaves a dangling pointer that can cause a use-after-free.\n\nWe recommend upgrading past commit b3d26c5702c7d6c45456326e56d2ccf3f103e60f.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-4623"
    },
    {
      "cve": "CVE-2023-4806",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in glibc. In an extremely rare situation, the getaddrinfo function may access memory that has been freed, resulting in an application crash. This issue is only exploitable when a NSS module implements only the _nss_*_gethostbyname2_r and _nss_*_getcanonname_r hooks without implementing the _nss_*_gethostbyname3_r hook. The resolved name should return a large number of IPv6 and IPv4, and the call to the getaddrinfo function should have the AF_INET6 address family with AI_CANONNAME, AI_ALL and AI_V4MAPPED as flags.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-4806"
    },
    {
      "cve": "CVE-2023-4807",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: The POLY1305 MAC (message authentication code) implementation contains a bug that might corrupt the internal state of applications on the Windows 64 platform when running on newer X86_64 processors supporting the AVX512-IFMA instructions. Impact summary: If in an application that uses the OpenSSL library an attacker can influence whether the POLY1305 MAC algorithm is used, the application state might be corrupted with various application dependent consequences. The POLY1305 MAC (message authentication code) implementation in OpenSSL does not save the contents of non-volatile XMM registers on Windows 64 platform when calculating the MAC of data larger than 64 bytes. Before returning to the caller all the XMM registers are set to zero rather than restoring their previous content. The vulnerable code is used only on newer x86_64 processors supporting the AVX512-IFMA instructions. The consequences of this kind of internal application state corruption can be various - from no consequences, if the calling application does not depend on the contents of non-volatile XMM registers at all, to the worst consequences, where the attacker could get complete control of the application process. However given the contents of the registers are just zeroized so the attacker cannot put arbitrary values inside, the most likely consequence, if any, would be an incorrect result of some application dependent calculations or a crash leading to a denial of service. The POLY1305 MAC algorithm is most frequently used as part of the CHACHA20-POLY1305 AEAD (authenticated encryption with associated data) algorithm. The most common usage of this AEAD cipher is with TLS protocol versions 1.2 and 1.3 and a malicious client can influence whether this AEAD cipher is used by the server. This implies that server applications using OpenSSL can be potentially impacted. However we are currently not aware of any concrete application that would be affected by this issue therefore we consider this a Low severity security issue. As a workaround the AVX512-IFMA instructions support can be disabled at runtime by setting the environment variable OPENSSL_ia32cap: OPENSSL_ia32cap=:~0x200000 The FIPS provider is not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-4807"
    },
    {
      "cve": "CVE-2023-4813",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in glibc. In an uncommon situation, the gaih_inet function may use memory that has been freed, resulting in an application crash. This issue is only exploitable when the getaddrinfo function is called and the hosts database in /etc/nsswitch.conf is configured with SUCCESS=continue or SUCCESS=merge.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-4813"
    },
    {
      "cve": "CVE-2023-4911",
      "cwe": {
        "id": "CWE-121",
        "name": "Stack-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A buffer overflow was discovered in the GNU C Library\u0027s dynamic loader ld.so while processing the GLIBC_TUNABLES environment variable. This issue could allow a local attacker to use maliciously crafted GLIBC_TUNABLES environment variables when launching binaries with SUID permission to execute code with elevated privileges.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-4911"
    },
    {
      "cve": "CVE-2023-4921",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s net/sched: sch_qfq component can be exploited to achieve local privilege escalation.\n\nWhen the plug qdisc is used as a class of the qfq qdisc, sending network packets triggers use-after-free in qfq_dequeue() due to the incorrect .peek handler of sch_plug and lack of error checking in agg_dequeue().\n\nWe recommend upgrading past commit 8fc134fee27f2263988ae38920bc03da416b03d8.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-4921"
    },
    {
      "cve": "CVE-2023-5156",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the GNU C Library. A recent fix for CVE-2023-4806 introduced the potential for a memory leak, which may result in an application crash.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-5156"
    },
    {
      "cve": "CVE-2023-5678",
      "cwe": {
        "id": "CWE-754",
        "name": "Improper Check for Unusual or Exceptional Conditions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Generating excessively long X9.42 DH keys or checking excessively long X9.42 DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_generate_key() to generate an X9.42 DH key may experience long delays. Likewise, applications that use DH_check_pub_key(), DH_check_pub_key_ex() or EVP_PKEY_public_check() to check an X9.42 DH key or X9.42 DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. While DH_check() performs all the necessary checks (as of CVE-2023-3817), DH_check_pub_key() doesn\u0027t make any of these checks, and is therefore vulnerable for excessively large P and Q parameters. Likewise, while DH_generate_key() performs a check for an excessively large P, it doesn\u0027t check for an excessively large Q. An application that calls DH_generate_key() or DH_check_pub_key() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. DH_generate_key() and DH_check_pub_key() are also called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_pub_key_ex(), EVP_PKEY_public_check(), and EVP_PKEY_generate(). Also vulnerable are the OpenSSL pkey command line application when using the \"-pubcheck\" option, as well as the OpenSSL genpkey command line application. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-5678"
    },
    {
      "cve": "CVE-2023-5717",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A heap out-of-bounds write vulnerability in the Linux kernel\u0027s Linux Kernel Performance Events (perf) component can be exploited to achieve local privilege escalation.\r\n\r\nIf perf_read_group() is called while an event\u0027s sibling_list is smaller than its child\u0027s sibling_list, it can increment or write to memory locations outside of the allocated buffer.\r\n\r\nWe recommend upgrading past commit 32671e3799ca2e4590773fd0e63aaa4229e50c06.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-5717"
    },
    {
      "cve": "CVE-2023-5981",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found that the response times to malformed ciphertexts in RSA-PSK ClientKeyExchange differ from response times of ciphertexts with correct PKCS#1 v1.5 padding.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-5981"
    },
    {
      "cve": "CVE-2023-6121",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds read vulnerability was found in the NVMe-oF/TCP subsystem in the Linux kernel. This issue may allow a remote attacker to send a crafted TCP packet, triggering a heap-based buffer overflow that results in kmalloc data being printed and potentially leaked to the kernel ring buffer (dmesg).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-6121"
    },
    {
      "cve": "CVE-2023-6817",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s netfilter: nf_tables component can be exploited to achieve local privilege escalation.\n\nThe function nft_pipapo_walk did not skip inactive elements during set walk which could lead double deactivations of PIPAPO (Pile Packet Policies) elements, leading to use-after-free.\n\nWe recommend upgrading past commit 317eb9685095678f2c9f5a8189de698c5354316a.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-6817"
    },
    {
      "cve": "CVE-2023-6931",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A heap out-of-bounds write vulnerability in the Linux kernel\u0027s Performance Events system component can be exploited to achieve local privilege escalation.\n\nA perf_event\u0027s read_size can overflow, leading to an heap out-of-bounds increment or write in perf_read_group().\n\nWe recommend upgrading past commit 382c27f4ed28f803b1f1473ac2d8db0afc795a1b.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-6931"
    },
    {
      "cve": "CVE-2023-6932",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s ipv4: igmp component can be exploited to achieve local privilege escalation.\n\nA race condition can be exploited to cause a timer be mistakenly registered on a RCU read locked object which is freed by another thread.\n\nWe recommend upgrading past commit e2b706c691905fe78468c361aaabc719d0a496f1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-6932"
    },
    {
      "cve": "CVE-2023-23914",
      "cwe": {
        "id": "CWE-319",
        "name": "Cleartext Transmission of Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A cleartext transmission of sensitive information vulnerability exists in curl \u003cv7.88.0 that could cause HSTS functionality fail when multiple URLs are requested serially. Using its HSTS support, curl can be instructed to use HTTPS instead of usingan insecure clear-text HTTP step even when HTTP is provided in the URL. ThisHSTS mechanism would however surprisingly be ignored by subsequent transferswhen done on the same command line because the state would not be properlycarried on.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-23914"
    },
    {
      "cve": "CVE-2023-23915",
      "cwe": {
        "id": "CWE-319",
        "name": "Cleartext Transmission of Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A cleartext transmission of sensitive information vulnerability exists in curl \u003cv7.88.0 that could cause HSTS functionality to behave incorrectly when multiple URLs are requested in parallel. Using its HSTS support, curl can be instructed to use HTTPS instead of using an insecure clear-text HTTP step even when HTTP is provided in the URL. This HSTS mechanism would however surprisingly fail when multiple transfers are done in parallel as the HSTS cache file gets overwritten by the most recentlycompleted transfer. A later HTTP-only transfer to the earlier host name would then *not* get upgraded properly to HSTS.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-23915"
    },
    {
      "cve": "CVE-2023-23916",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An allocation of resources without limits or throttling vulnerability exists in curl \u003cv7.88.0 based on the \"chained\" HTTP compression algorithms, meaning that a server response can be compressed multiple times and potentially with differentalgorithms. The number of acceptable \"links\" in this \"decompression chain\" wascapped, but the cap was implemented on a per-header basis allowing a maliciousserver to insert a virtually unlimited number of compression steps simply byusing many headers. The use of such a decompression chain could result in a \"malloc bomb\", making curl end up spending enormous amounts of allocated heap memory, or trying to and returning out of memory errors.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-23916"
    },
    {
      "cve": "CVE-2023-24329",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue in the urllib.parse component of Python before 3.11.4 allows attackers to bypass blocklisting methods by supplying a URL that starts with blank characters.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-24329"
    },
    {
      "cve": "CVE-2023-25136",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "OpenSSH server (sshd) 9.1 introduced a double-free vulnerability during options.kex_algorithms handling. This is fixed in OpenSSH 9.2. The double free can be leveraged, by an unauthenticated remote attacker in the default configuration, to jump to any location in the sshd address space. One third-party report states \"remote code execution is theoretically possible.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-25136"
    },
    {
      "cve": "CVE-2023-25139",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "sprintf in the GNU C Library (glibc) 2.37 has a buffer overflow (out-of-bounds write) in some situations with a correct buffer size. This is unrelated to CWE-676. It may write beyond the bounds of the destination buffer when attempting to write a padded, thousands-separated string representation of a number, if the buffer is allocated the exact size required to represent that number as a string. For example, 1,234,567 (with padding to 13) overflows by two bytes.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-25139"
    },
    {
      "cve": "CVE-2023-26604",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "systemd before 247 does not adequately block local privilege escalation for some Sudo configurations, e.g., plausible sudoers files in which the \"systemctl status\" command may be executed. Specifically, systemd does not set LESSSECURE to 1, and thus other programs may be launched from the less program. This presents a substantial security risk when running systemctl from Sudo, because less executes as root when the terminal size is too small to show the complete systemctl output.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-26604"
    },
    {
      "cve": "CVE-2023-27371",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU libmicrohttpd before 0.9.76 allows remote DoS (Denial of Service) due to improper parsing of a multipart/form-data boundary in the postprocessor.c MHD_create_post_processor() method. This allows an attacker to remotely send a malicious HTTP POST packet that includes one or more \u0027\\0\u0027 bytes in a multipart/form-data boundary field, which - assuming a specific heap layout - will result in an out-of-bounds read and a crash in the find_boundary() function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AC:H/AV:N/A:H/C:N/I:N/PR:N/S:U/UI:N",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-27371"
    },
    {
      "cve": "CVE-2023-27533",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability in input validation exists in curl \u003c8.0 during communication using the TELNET protocol may allow an attacker to pass on maliciously crafted user name and \"telnet options\" during server negotiation. The lack of proper input scrubbing allows an attacker to send content or perform option negotiation without the application\u0027s intent. This vulnerability could be exploited if an application allows user input, thereby enabling attackers to execute arbitrary code on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-27533"
    },
    {
      "cve": "CVE-2023-27534",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A path traversal vulnerability exists in curl \u003c8.0.0 SFTP implementation causes the tilde (~) character to be wrongly replaced when used as a prefix in the first path element, in addition to its intended use as the first element to indicate a path relative to the user\u0027s home directory. Attackers can exploit this flaw to bypass filtering or execute arbitrary code by crafting a path like /~2/foo while accessing a server with a specific user.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-27534"
    },
    {
      "cve": "CVE-2023-27535",
      "cwe": {
        "id": "CWE-287",
        "name": "Improper Authentication"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An authentication bypass vulnerability exists in libcurl \u003c8.0.0 in the FTP connection reuse feature that can result in wrong credentials being used during subsequent transfers. Previously created connections are kept in a connection pool for reuse if they match the current setup. However, certain FTP settings such as CURLOPT_FTP_ACCOUNT, CURLOPT_FTP_ALTERNATIVE_TO_USER, CURLOPT_FTP_SSL_CCC, and CURLOPT_USE_SSL were not included in the configuration match checks, causing them to match too easily. This could lead to libcurl using the wrong credentials when performing a transfer, potentially allowing unauthorized access to sensitive information.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-27535"
    },
    {
      "cve": "CVE-2023-27536",
      "cwe": {
        "id": "CWE-287",
        "name": "Improper Authentication"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An authentication bypass vulnerability exists libcurl \u003c8.0.0 in the connection reuse feature which can reuse previously established connections with incorrect user permissions due to a failure to check for changes in the CURLOPT_GSSAPI_DELEGATION option. This vulnerability affects krb5/kerberos/negotiate/GSSAPI transfers and could potentially result in unauthorized access to sensitive information. The safest option is to not reuse connections if the CURLOPT_GSSAPI_DELEGATION option has been changed.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-27536"
    },
    {
      "cve": "CVE-2023-27537",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A double free vulnerability exists in libcurl \u003c8.0.0 when sharing HSTS data between separate \"handles\". This sharing was introduced without considerations for do this sharing across separate threads but there was no indication of this fact in the documentation. Due to missing mutexes or thread locks, two threads sharing the same HSTS data could end up doing a double-free or use-after-free.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-27537"
    },
    {
      "cve": "CVE-2023-27538",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl would reuse a previously created connection even when an SSH related option had been changed that should have prohibited reuse. libcurl keeps previously used connections in a connection pool for subsequent transfers to reuse if one of them matches the setup. However, two SSH settings were left out from the configuration match checks, making them match too easily.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-27538"
    },
    {
      "cve": "CVE-2023-28484",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libxml2 before 2.10.4, parsing of certain invalid XSD schemas can lead to a NULL pointer dereference and subsequently a segfault. This occurs in xmlSchemaFixupComplexType in xmlschemas.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-28484"
    },
    {
      "cve": "CVE-2023-28531",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ssh-add in OpenSSH before 9.3 adds smartcard keys to ssh-agent without the intended per-hop destination constraints. The earliest affected version is 8.9.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-28531"
    },
    {
      "cve": "CVE-2023-29383",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Shadow 4.13, it is possible to inject control characters into fields provided to the SUID program chfn (change finger). Although it is not possible to exploit this directly (e.g., adding a new user fails because \\n is in the block list), it is possible to misrepresent the /etc/passwd file when viewed. Use of \\r manipulations and Unicode characters to work around blocking of the : character make it possible to give the impression that a new user has been added. In other words, an adversary may be able to convince a system administrator to take the system offline (an indirect, social-engineered denial of service) by demonstrating that \"cat /etc/passwd\" shows a rogue user account.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-29383"
    },
    {
      "cve": "CVE-2023-29469",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.10.4. When hashing empty dict strings in a crafted XML document, xmlDictComputeFastKey in dict.c can produce non-deterministic values, leading to various logic and memory errors, such as a double free. This behavior occurs because there is an attempt to use the first byte of an empty string, and any value is possible (not solely the \u0027\\0\u0027 value).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-29469"
    },
    {
      "cve": "CVE-2023-29491",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ncurses before 6.4 20230408, when used by a setuid application, allows local users to trigger security-relevant memory corruption via malformed data in a terminfo database file that is found in $HOME/.terminfo or reached via the TERMINFO or TERM environment variable.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-29491"
    },
    {
      "cve": "CVE-2023-29499",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in GLib. GVariant deserialization fails to validate that the input conforms to the expected format, leading to denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-29499"
    },
    {
      "cve": "CVE-2023-31085",
      "cwe": {
        "id": "CWE-369",
        "name": "Divide By Zero"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in drivers/mtd/ubi/cdev.c in the Linux kernel 6.2. There is a divide-by-zero error in do_div(sz,mtd-\u003eerasesize), used indirectly by ctrl_cdev_ioctl, when mtd-\u003eerasesize is 0.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-31085"
    },
    {
      "cve": "CVE-2023-32611",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in GLib. GVariant deserialization is vulnerable to a slowdown issue where a crafted GVariant can cause excessive processing, leading to denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-32611"
    },
    {
      "cve": "CVE-2023-32636",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in glib, where the gvariant deserialization code is vulnerable to a denial of service introduced by additional input validation added to resolve CVE-2023-29499. The offset table validation may be very slow. This bug does not affect any released version of glib but does affect glib distributors who followed the guidance of glib developers to backport the initial fix for CVE-2023-29499.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-32636"
    },
    {
      "cve": "CVE-2023-32643",
      "cwe": {
        "id": "CWE-122",
        "name": "Heap-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in GLib. The GVariant deserialization code is vulnerable to a heap buffer overflow introduced by the fix for CVE-2023-32665. This bug does not affect any released version of GLib, but does affect GLib distributors who followed the guidance of GLib developers to backport the initial fix for CVE-2023-32665.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-32643"
    },
    {
      "cve": "CVE-2023-32665",
      "cwe": {
        "id": "CWE-502",
        "name": "Deserialization of Untrusted Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in GLib. GVariant deserialization is vulnerable to an exponential blowup issue where a crafted GVariant can cause excessive processing, leading to denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-32665"
    },
    {
      "cve": "CVE-2023-34319",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The fix for XSA-423 added logic to Linux\u0027es netback driver to deal with\na frontend splitting a packet in a way such that not all of the headers\nwould come in one piece.  Unfortunately the logic introduced there\ndidn\u0027t account for the extreme case of the entire packet being split\ninto as many pieces as permitted by the protocol, yet still being\nsmaller than the area that\u0027s specially dealt with to keep all (possible)\nheaders together.  Such an unusual packet would therefore trigger a\nbuffer overrun in the driver.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-34319"
    },
    {
      "cve": "CVE-2023-34969",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "D-Bus before 1.15.6 sometimes allows unprivileged users to crash dbus-daemon. If a privileged user with control over the dbus-daemon is using the org.freedesktop.DBus.Monitoring interface to monitor message bus traffic, then an unprivileged user with the ability to connect to the same dbus-daemon can cause a dbus-daemon crash under some circumstances via an unreplyable message. When done on the well-known system bus, this is a denial-of-service vulnerability. The fixed versions are 1.12.28, 1.14.8, and 1.15.6.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-34969"
    },
    {
      "cve": "CVE-2023-35001",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Linux Kernel nftables Out-Of-Bounds Read/Write Vulnerability; nft_byteorder poorly handled vm register contents when CAP_NET_ADMIN is in any user or network namespace",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-35001"
    },
    {
      "cve": "CVE-2023-35945",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Envoy is a cloud-native high-performance edge/middle/service proxy. Envoy\u2019s HTTP/2 codec may leak a header map and bookkeeping structures upon receiving `RST_STREAM` immediately followed by the `GOAWAY` frames from an upstream server. In nghttp2, cleanup of pending requests due to receipt of the `GOAWAY` frame skips de-allocation of the bookkeeping structure and pending compressed header. The error return [code path] is taken if connection is already marked for not sending more requests due to `GOAWAY` frame. The clean-up code is right after the return statement, causing memory leak. Denial of service through memory exhaustion. This vulnerability was patched in versions(s) 1.26.3, 1.25.8, 1.24.9, 1.23.11.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-35945"
    },
    {
      "cve": "CVE-2023-38408",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The PKCS#11 feature in ssh-agent in OpenSSH before 9.3p2 has an insufficiently trustworthy search path, leading to remote code execution if an agent is forwarded to an attacker-controlled system. (Code in /usr/lib is not necessarily safe for loading into ssh-agent.) NOTE: this issue exists because of an incomplete fix for CVE-2016-10009.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.7,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:R/S:C/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-38408"
    },
    {
      "cve": "CVE-2023-38545",
      "cwe": {
        "id": "CWE-122",
        "name": "Heap-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "This flaw makes curl overflow a heap based buffer in the SOCKS5 proxy handshake.\r\n\r\nWhen curl is asked to pass along the hostname to the SOCKS5 proxy to allow that to resolve the address instead of it getting done by curl itself, the maximum length that hostname can be is 255 bytes.\r\n\r\nIf the hostname is detected to be longer than 255 bytes, curl switches to local name resolving and instead passes on the resolved address only to the proxy. Due to a bug, the local variable that means \"let the host resolve the name\" could get the wrong value during a slow SOCKS5 handshake, and contrary to the intention, copy the too long hostname to the target buffer instead of copying just the resolved address there.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-38545"
    },
    {
      "cve": "CVE-2023-38546",
      "cwe": {
        "id": "CWE-73",
        "name": "External Control of File Name or Path"
      },
      "notes": [
        {
          "category": "summary",
          "text": "This flaw allows an attacker to insert cookies at will into a running program\r\nusing libcurl, if the specific series of conditions are met.\r\n\r\nlibcurl performs transfers. In its API, an application creates \"easy handles\"\r\nthat are the individual handles for single transfers.\r\n\r\nlibcurl provides a function call that duplicates en easy handle called\r\n[curl_easy_duphandle](https://curl.se/libcurl/c/curl_easy_duphandle.html).\r\n\r\nIf a transfer has cookies enabled when the handle is duplicated, the\r\ncookie-enable state is also cloned - but without cloning the actual\r\ncookies. If the source handle did not read any cookies from a specific file on\r\ndisk, the cloned version of the handle would instead store the file name as\r\n`none` (using the four ASCII letters, no quotes).\r\n\r\nSubsequent use of the cloned handle that does not explicitly set a source to\r\nload cookies from would then inadvertently load cookies from a file named\r\n`none` - if such a file exists and is readable in the current directory of the\r\nprogram using libcurl. And if using the correct file format of course.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-38546"
    },
    {
      "cve": "CVE-2023-39128",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU gdb (GDB) 13.0.50.20220805-git was discovered to contain a stack overflow via the function ada_decode at /gdb/ada-lang.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-39128"
    },
    {
      "cve": "CVE-2023-39189",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Netfilter subsystem in the Linux kernel. The nfnl_osf_add_callback function did not validate the user mode controlled opt_num field. This flaw allows a local privileged (CAP_NET_ADMIN) attacker to trigger an out-of-bounds read, leading to a crash or information disclosure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-39189"
    },
    {
      "cve": "CVE-2023-39192",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Netfilter subsystem in the Linux kernel. The xt_u32 module did not validate the fields in the xt_u32 structure. This flaw allows a local privileged attacker to trigger an out-of-bounds read by setting the size fields with a value beyond the array boundaries, leading to a crash or information disclosure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:C/C:H/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-39192"
    },
    {
      "cve": "CVE-2023-39193",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Netfilter subsystem in the Linux kernel. The sctp_mt_check did not validate the flag_count field. This flaw allows a local privileged (CAP_NET_ADMIN) attacker to trigger an out-of-bounds read, leading to a crash or information disclosure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-39193"
    },
    {
      "cve": "CVE-2023-39194",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the XFRM subsystem in the Linux kernel. The specific flaw exists within the processing of state filters, which can result in a read past the end of an allocated buffer. This flaw allows a local privileged (CAP_NET_ADMIN) attacker to trigger an out-of-bounds read, potentially leading to an information disclosure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.2,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:C/C:L/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-39194"
    },
    {
      "cve": "CVE-2023-39615",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Xmlsoft Libxml2 v2.11.0 was discovered to contain an out-of-bounds read via the xmlSAX2StartElement() function at /libxml2/SAX2.c. This vulnerability allows attackers to cause a Denial of Service (DoS) via supplying a crafted XML file. NOTE: the vendor\u0027s position is that the product does not support the legacy SAX1 interface with custom callbacks; there is a crash even without crafted input.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-39615"
    },
    {
      "cve": "CVE-2023-40283",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in l2cap_sock_release in net/bluetooth/l2cap_sock.c in the Linux kernel before 6.4.10. There is a use-after-free because the children of an sk are mishandled.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-40283"
    },
    {
      "cve": "CVE-2023-42754",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer dereference flaw was found in the Linux kernel ipv4 stack. The socket buffer (skb) was assumed to be associated with a device before calling __ip_options_compile, which is not always the case if the skb is re-routed by ipvs. This issue may allow a local user with CAP_NET_ADMIN privileges to crash the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-42754"
    },
    {
      "cve": "CVE-2023-42755",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the IPv4 Resource Reservation Protocol (RSVP) classifier in the Linux kernel. The xprt pointer may go beyond the linear part of the skb, leading to an out-of-bounds read in the `rsvp_classify` function. This issue may allow a local user to crash the system and cause a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-42755"
    },
    {
      "cve": "CVE-2023-44487",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The HTTP/2 protocol allows a denial of service (server resource consumption) because request cancellation can reset many streams quickly, as exploited in the wild in August through October 2023.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-44487"
    },
    {
      "cve": "CVE-2023-45322",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libxml2 through 2.11.5 has a use-after-free that can only occur after a certain memory allocation fails. This occurs in xmlUnlinkNode in tree.c. NOTE: the vendor\u0027s position is \"I don\u0027t think these issues are critical enough to warrant a CVE ID ... because an attacker typically can\u0027t control when memory allocations fail.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-45322"
    },
    {
      "cve": "CVE-2023-45853",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "MiniZip in zlib through 1.3 has an integer overflow and resultant heap-based buffer overflow in zipOpenNewFileInZip4_64 via a long filename, comment, or extra field. NOTE: MiniZip is not a supported part of the zlib product.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-45853"
    },
    {
      "cve": "CVE-2023-45871",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in drivers/net/ethernet/intel/igb/igb_main.c in the IGB driver in the Linux kernel before 6.5.3. A buffer size may not be adequate for frames larger than the MTU.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-45871"
    },
    {
      "cve": "CVE-2023-45898",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The Linux kernel before 6.5.4 has an es1 use-after-free in fs/ext4/extents_status.c, related to ext4_es_insert_extent.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-45898"
    },
    {
      "cve": "CVE-2023-45918",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ncurses 6.4-20230610 has a NULL pointer dereference in tgetstr in tinfo/lib_termcap.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-45918"
    },
    {
      "cve": "CVE-2023-46218",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "This flaw allows a malicious HTTP server to set \"super cookies\" in curl that are then passed back to more origins than what is otherwise allowed or possible. This allows a site to set cookies that then would get sent to different and unrelated sites and domains. It could do this by exploiting a mixed case flaw in curl\u0027s function that verifies a given cookie domain against the Public Suffix List (PSL). For example a cookie could be set with `domain=co.UK` when the URL used a lower case hostname `curl.co.uk`, even though `co.uk` is listed as a PSL domain.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-46218"
    },
    {
      "cve": "CVE-2023-46219",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When saving HSTS data to an excessively long file name, curl could end up removing all contents, making subsequent requests using that file unaware of the HSTS status they should otherwise use.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-46219"
    },
    {
      "cve": "CVE-2023-46862",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel through 6.5.9. During a race with SQ thread exit, an io_uring/fdinfo.c io_uring_show_fdinfo NULL pointer dereference can occur.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-46862"
    },
    {
      "cve": "CVE-2023-48795",
      "cwe": {
        "id": "CWE-222",
        "name": "Truncation of Security-relevant Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The SSH transport protocol with certain OpenSSH extensions, found in OpenSSH before 9.6 and other products, allows remote attackers to bypass integrity checks such that some packets are omitted (from the extension negotiation message), and a client and server may consequently end up with a connection for which some security features have been downgraded or disabled, aka a Terrapin attack. This occurs because the SSH Binary Packet Protocol (BPP), implemented by these extensions, mishandles the handshake phase and mishandles use of sequence numbers. For example, there is an effective attack against SSH\u0027s use of ChaCha20-Poly1305 (and CBC with Encrypt-then-MAC). The bypass occurs in chacha20-poly1305@openssh.com and (if CBC is used) the -etm@openssh.com MAC algorithms. This also affects Maverick Synergy Java SSH API before 3.1.0-SNAPSHOT, Dropbear through 2022.83, Ssh before 5.1.1 in Erlang/OTP, PuTTY before 0.80, AsyncSSH before 2.14.2, golang.org/x/crypto before 0.17.0, libssh before 0.10.6, libssh2 through 1.11.0, Thorn Tech SFTP Gateway before 3.4.6, Tera Term before 5.1, Paramiko before 3.4.0, jsch before 0.2.15, SFTPGo before 2.5.6, Netgate pfSense Plus through 23.09.1, Netgate pfSense CE through 2.7.2, HPN-SSH through 18.2.0, ProFTPD before 1.3.8b (and before1.3.9rc2), ORYX CycloneSSH before 2.3.4, NetSarang XShell 7 before Build 0144, CrushFTP before 10.6.0, ConnectBot SSH library before 2.2.22, Apache MINA sshd through 2.11.0, sshj through 0.37.0, TinySSH through 20230101, trilead-ssh2 6401, the net-ssh gem 7.2.0 for Ruby, the mscdex ssh2 module before 1.15.0 for Node.js, the thrussh library before 0.35.1 for Rust, and the Russh crate before 0.40.2 for Rust; and there could be effects on Bitvise SSH through 9.31.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-48795"
    },
    {
      "cve": "CVE-2023-52425",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libexpat through 2.5.0 allows a denial of service (resource consumption) because many full reparsings are required in the case of a large token for which multiple buffer fills are needed.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-52425"
    },
    {
      "cve": "CVE-2023-52426",
      "cwe": {
        "id": "CWE-776",
        "name": "Improper Restriction of Recursive Entity References in DTDs (\u0027XML Entity Expansion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libexpat through 2.5.0 allows recursive XML Entity Expansion if XML_DTD is undefined at compile time.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2023-52426"
    },
    {
      "cve": "CVE-2024-0584",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free issue was found in igmp_start_timer in net/ipv4/igmp.c in the network sub-component in the Linux Kernel. This flaw allows a local user to observe a refcnt use-after-free issue when receiving an igmp query packet, leading to a kernel information leak.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2024-0584"
    },
    {
      "cve": "CVE-2024-2004",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When a protocol selection parameter option disables all protocols without adding any then the default set of protocols would remain in the allowed set due to an error in the logic for removing protocols. The below command would perform a request to curl.se with a plaintext protocol which has been explicitly disabled.      curl --proto -all,-http http://curl.se  The flaw is only present if the set of selected protocols disables the entire set of available protocols, in itself a command with no practical use and therefore unlikely to be encountered in real situations. The curl security team has thus assessed this to be low severity bug.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2024-2004"
    },
    {
      "cve": "CVE-2024-2379",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl skips the certificate verification for a QUIC connection under certain conditions, when built to use wolfSSL. If told to use an unknown/bad cipher or curve, the error path accidentally skips the verification and returns OK, thus ignoring any certificate problems.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2024-2379"
    },
    {
      "cve": "CVE-2024-2398",
      "cwe": {
        "id": "CWE-772",
        "name": "Missing Release of Resource after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When an application tells libcurl it wants to allow HTTP/2 server push, and the amount of received headers for the push surpasses the maximum allowed limit (1000), libcurl aborts the server push. When aborting, libcurl inadvertently does not free all the previously allocated headers and instead leaks the memory.  Further, this error condition fails silently and is therefore not easily detected by an application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2024-2398"
    },
    {
      "cve": "CVE-2024-2466",
      "cwe": {
        "id": "CWE-297",
        "name": "Improper Validation of Certificate with Host Mismatch"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl did not check the server certificate of TLS connections done to a host specified as an IP address, when built to use mbedTLS.  libcurl would wrongly avoid using the set hostname function when the specified hostname was given as an IP address, therefore completely skipping the certificate check. This affects all uses of TLS protocols (HTTPS, FTPS, IMAPS, POPS3, SMTPS, etc).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2024-2466"
    },
    {
      "cve": "CVE-2024-2511",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Some non-default TLS server configurations can cause unbounded memory growth when processing TLSv1.3 sessions\r\nImpact summary: An attacker may exploit certain server configurations to trigger unbounded memory growth that would lead to a Denial of Service This problem can occur in TLSv1.3 if the non-default SSL_OP_NO_TICKET option is being used (but not if early_data support is also configured and the default anti-replay protection is in use). In this case, under certain conditions, the session cache can get into an incorrect state and it will fail to flush properly as it fills. The session cache will continue to grow in an unbounded manner. A malicious client could deliberately create the scenario for this failure to force a Denial of Service. It may also happen by accident in normal operation. This issue only affects TLS servers supporting TLSv1.3. It does not affect TLS clients. The FIPS modules in 3.2, 3.1 and 3.0 are not affected by this issue. OpenSSL 1.0.2 is also not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2024-2511"
    },
    {
      "cve": "CVE-2024-2961",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The iconv() function in the GNU C Library versions 2.39 and older may overflow the output buffer passed to it by up to 4 bytes when converting strings to the ISO-2022-CN-EXT character set, which may be used to crash an application or overwrite a neighbouring variable.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2024-2961"
    },
    {
      "cve": "CVE-2024-28085",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "wall in util-linux through 2.40, often installed with setgid tty permissions, allows escape sequences to be sent to other users\u0027 terminals through argv. (Specifically, escape sequences received from stdin are blocked, but escape sequences received from argv are not blocked.) There may be plausible scenarios where this leads to account takeover.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.0"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2024-28085"
    },
    {
      "cve": "CVE-2024-28182",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nghttp2 is an implementation of the Hypertext Transfer Protocol version 2 in C. The nghttp2 library prior to version 1.61.0 keeps reading the unbounded number of HTTP/2 CONTINUATION frames even after a stream is reset to keep HPACK context in sync.  This causes excessive CPU usage to decode HPACK stream. nghttp2 v1.61.0 mitigates this vulnerability by limiting the number of CONTINUATION frames it accepts per stream. There is no workaround for this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2024-28182"
    },
    {
      "cve": "CVE-2024-28757",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libexpat through 2.6.1 allows an XML Entity Expansion attack when there is isolated use of external parsers (created via XML_ExternalEntityParserCreate).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2024-28757"
    },
    {
      "cve": "CVE-2024-28834",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in GnuTLS. The Minerva attack is a cryptographic vulnerability that exploits deterministic behavior in systems like GnuTLS, leading to side-channel leaks. In specific scenarios, such as when using the GNUTLS_PRIVKEY_FLAG_REPRODUCIBLE flag, it can result in a noticeable step in nonce size from 513 to 512 bits, exposing a potential timing side-channel.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2024-28834"
    },
    {
      "cve": "CVE-2024-28835",
      "cwe": {
        "id": "CWE-248",
        "name": "Uncaught Exception"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw has been discovered in GnuTLS where an application crash can be induced when attempting to verify a specially crafted .pem bundle using the \"certtool --verify-chain\" command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.0,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2024-28835"
    },
    {
      "cve": "CVE-2024-33599",
      "cwe": {
        "id": "CWE-121",
        "name": "Stack-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nscd: Stack-based buffer overflow in netgroup cache\r\n\r\nIf the Name Service Cache Daemon\u0027s (nscd) fixed size cache is exhausted\r\nby client requests then a subsequent client request for netgroup data\r\nmay result in a stack-based buffer overflow.  This flaw was introduced\r\nin glibc 2.15 when the cache was added to nscd.\r\n\r\nThis vulnerability is only present in the nscd binary.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.6,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2024-33599"
    },
    {
      "cve": "CVE-2024-33600",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nscd: Null pointer crashes after notfound response\r\n\r\nIf the Name Service Cache Daemon\u0027s (nscd) cache fails to add a not-found\r\nnetgroup response to the cache, the client request can result in a null\r\npointer dereference.  This flaw was introduced in glibc 2.15 when the\r\ncache was added to nscd.\r\n\r\nThis vulnerability is only present in the nscd binary.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2024-33600"
    },
    {
      "cve": "CVE-2024-33601",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nscd: netgroup cache may terminate daemon on memory allocation failure\r\n\r\nThe Name Service Cache Daemon\u0027s (nscd) netgroup cache uses xmalloc or\r\nxrealloc and these functions may terminate the process due to a memory\r\nallocation failure resulting in a denial of service to the clients.  The\r\nflaw was introduced in glibc 2.15 when the cache was added to nscd.\r\n\r\nThis vulnerability is only present in the nscd binary.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.0,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2024-33601"
    },
    {
      "cve": "CVE-2024-33602",
      "cwe": {
        "id": "CWE-466",
        "name": "Return of Pointer Value Outside of Expected Range"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nscd: netgroup cache assumes NSS callback uses in-buffer strings\r\n\r\nThe Name Service Cache Daemon\u0027s (nscd) netgroup cache can corrupt memory\r\nwhen the NSS callback does not store all strings in the provided buffer.\r\nThe flaw was introduced in glibc 2.15 when the cache was added to nscd.\r\n\r\nThis vulnerability is only present in the nscd binary.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.0,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2024-33602"
    },
    {
      "cve": "CVE-2024-34459",
      "cwe": {
        "id": "CWE-126",
        "name": "Buffer Over-read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in xmllint (from libxml2) before 2.11.8 and 2.12.x before 2.12.7. Formatting error messages with xmllint --htmlout can result in a buffer over-read in xmlHTMLPrintFileContext in xmllint.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5"
          ]
        }
      ],
      "title": "CVE-2024-34459"
    }
  ]
}

{
  "document": {
    "aggregate_severity": {
      "text": "hoch"
    },
    "category": "csaf_base",
    "csaf_version": "2.0",
    "distribution": {
      "tlp": {
        "label": "WHITE",
        "url": "https://www.first.org/tlp/"
      }
    },
    "lang": "de-DE",
    "notes": [
      {
        "category": "legal_disclaimer",
        "text": "Das BSI ist als Anbieter f\u00fcr die eigenen, zur Nutzung bereitgestellten Inhalte nach den allgemeinen Gesetzen verantwortlich. Nutzerinnen und Nutzer sind jedoch daf\u00fcr verantwortlich, die Verwendung und/oder die Umsetzung der mit den Inhalten bereitgestellten Informationen sorgf\u00e4ltig im Einzelfall zu pr\u00fcfen."
      },
      {
        "category": "description",
        "text": "Tenable Nessus Network Monitor ist eine L\u00f6sung zur Inventarisierung und \u00dcberwachung von Netzwerkger\u00e4ten und den genutzten Protokollen.",
        "title": "Produktbeschreibung"
      },
      {
        "category": "summary",
        "text": "Ein entfernter, anonymer, authentisierter oder lokaler Angreifer kann mehrere Schwachstellen in Tenable Security Nessus Network Monitor ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren.",
        "title": "Angriff"
      },
      {
        "category": "general",
        "text": "- Sonstiges",
        "title": "Betroffene Betriebssysteme"
      }
    ],
    "publisher": {
      "category": "other",
      "contact_details": "csaf-provider@cert-bund.de",
      "name": "Bundesamt f\u00fcr Sicherheit in der Informationstechnik",
      "namespace": "https://www.bsi.bund.de"
    },
    "references": [
      {
        "category": "self",
        "summary": "WID-SEC-W-2023-1614 - CSAF Version",
        "url": "https://wid.cert-bund.de/.well-known/csaf/white/2023/wid-sec-w-2023-1614.json"
      },
      {
        "category": "self",
        "summary": "WID-SEC-2023-1614 - Portal Version",
        "url": "https://wid.cert-bund.de/portal/wid/securityadvisory?name=WID-SEC-2023-1614"
      },
      {
        "category": "external",
        "summary": "Tenable Security Advisory TNS-2023-34 vom 2023-10-25",
        "url": "https://de.tenable.com/security/tns-2023-34"
      },
      {
        "category": "external",
        "summary": "Tenable Security Advisory vom 2023-06-29",
        "url": "https://de.tenable.com/security/tns-2023-23"
      }
    ],
    "source_lang": "en-US",
    "title": "Tenable Security Nessus Network Monitor: Mehrere Schwachstellen",
    "tracking": {
      "current_release_date": "2023-10-25T22:00:00.000+00:00",
      "generator": {
        "date": "2024-02-15T17:33:55.765+00:00",
        "engine": {
          "name": "BSI-WID",
          "version": "1.3.0"
        }
      },
      "id": "WID-SEC-W-2023-1614",
      "initial_release_date": "2023-06-29T22:00:00.000+00:00",
      "revision_history": [
        {
          "date": "2023-06-29T22:00:00.000+00:00",
          "number": "1",
          "summary": "Initiale Fassung"
        },
        {
          "date": "2023-07-03T22:00:00.000+00:00",
          "number": "2",
          "summary": "Produkt berichtigt"
        },
        {
          "date": "2023-10-25T22:00:00.000+00:00",
          "number": "3",
          "summary": "Neue Updates von Tenable aufgenommen"
        }
      ],
      "status": "final",
      "version": "3"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "category": "product_name",
            "name": "Tenable Security Nessus Network Monitor \u003c 6.2.2",
            "product": {
              "name": "Tenable Security Nessus Network Monitor \u003c 6.2.2",
              "product_id": "T028403",
              "product_identification_helper": {
                "cpe": "cpe:/a:tenable:nessus_network_monitor:6.2.2"
              }
            }
          }
        ],
        "category": "vendor",
        "name": "Tenable Security"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2023-32067",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-32067"
    },
    {
      "cve": "CVE-2023-31147",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-31147"
    },
    {
      "cve": "CVE-2023-31130",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-31130"
    },
    {
      "cve": "CVE-2023-31124",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-31124"
    },
    {
      "cve": "CVE-2023-29469",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-29469"
    },
    {
      "cve": "CVE-2023-28484",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-28484"
    },
    {
      "cve": "CVE-2023-28322",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-28322"
    },
    {
      "cve": "CVE-2023-28321",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-28321"
    },
    {
      "cve": "CVE-2023-28320",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-28320"
    },
    {
      "cve": "CVE-2023-27538",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-27538"
    },
    {
      "cve": "CVE-2023-27536",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-27536"
    },
    {
      "cve": "CVE-2023-27535",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-27535"
    },
    {
      "cve": "CVE-2023-27534",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-27534"
    },
    {
      "cve": "CVE-2023-27533",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-27533"
    },
    {
      "cve": "CVE-2023-2650",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-2650"
    },
    {
      "cve": "CVE-2023-23916",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-23916"
    },
    {
      "cve": "CVE-2023-23915",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-23915"
    },
    {
      "cve": "CVE-2023-23914",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-23914"
    },
    {
      "cve": "CVE-2023-1255",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-1255"
    },
    {
      "cve": "CVE-2023-0466",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-0466"
    },
    {
      "cve": "CVE-2023-0465",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-0465"
    },
    {
      "cve": "CVE-2022-4904",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-4904"
    },
    {
      "cve": "CVE-2022-46908",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-46908"
    },
    {
      "cve": "CVE-2022-43552",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-43552"
    },
    {
      "cve": "CVE-2022-43551",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-43551"
    },
    {
      "cve": "CVE-2022-42916",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-42916"
    },
    {
      "cve": "CVE-2022-42915",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-42915"
    },
    {
      "cve": "CVE-2022-40304",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-40304"
    },
    {
      "cve": "CVE-2022-40303",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-40303"
    },
    {
      "cve": "CVE-2022-35737",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-35737"
    },
    {
      "cve": "CVE-2022-35252",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-35252"
    },
    {
      "cve": "CVE-2022-32221",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-32221"
    },
    {
      "cve": "CVE-2022-32208",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-32208"
    },
    {
      "cve": "CVE-2022-32207",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-32207"
    },
    {
      "cve": "CVE-2022-32206",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-32206"
    },
    {
      "cve": "CVE-2022-32205",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-32205"
    },
    {
      "cve": "CVE-2022-31160",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-31160"
    },
    {
      "cve": "CVE-2022-29824",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-29824"
    },
    {
      "cve": "CVE-2022-27782",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-27782"
    },
    {
      "cve": "CVE-2022-27781",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-27781"
    },
    {
      "cve": "CVE-2022-27776",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-27776"
    },
    {
      "cve": "CVE-2022-27775",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-27775"
    },
    {
      "cve": "CVE-2022-27774",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-27774"
    },
    {
      "cve": "CVE-2022-23395",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-23395"
    },
    {
      "cve": "CVE-2022-23308",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-23308"
    },
    {
      "cve": "CVE-2022-22576",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-22576"
    },
    {
      "cve": "CVE-2021-45346",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2021-45346"
    },
    {
      "cve": "CVE-2021-3672",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2021-3672"
    },
    {
      "cve": "CVE-2021-36690",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2021-36690"
    },
    {
      "cve": "CVE-2021-3541",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2021-3541"
    },
    {
      "cve": "CVE-2021-3537",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2021-3537"
    },
    {
      "cve": "CVE-2021-3518",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2021-3518"
    },
    {
      "cve": "CVE-2021-3517",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2021-3517"
    },
    {
      "cve": "CVE-2021-31239",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2021-31239"
    },
    {
      "cve": "CVE-2021-30560",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2021-30560"
    },
    {
      "cve": "CVE-2021-20227",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2021-20227"
    },
    {
      "cve": "CVE-2020-9327",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2020-9327"
    },
    {
      "cve": "CVE-2020-7595",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2020-7595"
    },
    {
      "cve": "CVE-2020-35527",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2020-35527"
    },
    {
      "cve": "CVE-2020-35525",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2020-35525"
    },
    {
      "cve": "CVE-2020-24977",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2020-24977"
    },
    {
      "cve": "CVE-2020-15358",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2020-15358"
    },
    {
      "cve": "CVE-2020-14155",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2020-14155"
    },
    {
      "cve": "CVE-2020-13871",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2020-13871"
    },
    {
      "cve": "CVE-2020-13632",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2020-13632"
    },
    {
      "cve": "CVE-2020-13631",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2020-13631"
    },
    {
      "cve": "CVE-2020-13630",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2020-13630"
    },
    {
      "cve": "CVE-2020-13435",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2020-13435"
    },
    {
      "cve": "CVE-2020-13434",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2020-13434"
    },
    {
      "cve": "CVE-2020-11656",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2020-11656"
    },
    {
      "cve": "CVE-2020-11655",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2020-11655"
    },
    {
      "cve": "CVE-2019-9937",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-9937"
    },
    {
      "cve": "CVE-2019-9936",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-9936"
    },
    {
      "cve": "CVE-2019-8457",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-8457"
    },
    {
      "cve": "CVE-2019-5815",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-5815"
    },
    {
      "cve": "CVE-2019-20838",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-20838"
    },
    {
      "cve": "CVE-2019-20388",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-20388"
    },
    {
      "cve": "CVE-2019-20218",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-20218"
    },
    {
      "cve": "CVE-2019-19959",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-19959"
    },
    {
      "cve": "CVE-2019-19956",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-19956"
    },
    {
      "cve": "CVE-2019-19926",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-19926"
    },
    {
      "cve": "CVE-2019-19925",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-19925"
    },
    {
      "cve": "CVE-2019-19924",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-19924"
    },
    {
      "cve": "CVE-2019-19923",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-19923"
    },
    {
      "cve": "CVE-2019-19880",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-19880"
    },
    {
      "cve": "CVE-2019-19646",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-19646"
    },
    {
      "cve": "CVE-2019-19645",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-19645"
    },
    {
      "cve": "CVE-2019-19603",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-19603"
    },
    {
      "cve": "CVE-2019-19317",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-19317"
    },
    {
      "cve": "CVE-2019-19244",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-19244"
    },
    {
      "cve": "CVE-2019-19242",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-19242"
    },
    {
      "cve": "CVE-2019-16168",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-16168"
    },
    {
      "cve": "CVE-2019-13118",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-13118"
    },
    {
      "cve": "CVE-2019-13117",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-13117"
    },
    {
      "cve": "CVE-2019-12900",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-12900"
    },
    {
      "cve": "CVE-2019-11068",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-11068"
    },
    {
      "cve": "CVE-2018-9251",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2018-9251"
    },
    {
      "cve": "CVE-2018-14567",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2018-14567"
    },
    {
      "cve": "CVE-2018-14404",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2018-14404"
    },
    {
      "cve": "CVE-2017-9050",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2017-9050"
    },
    {
      "cve": "CVE-2017-9049",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2017-9049"
    },
    {
      "cve": "CVE-2017-9048",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2017-9048"
    },
    {
      "cve": "CVE-2017-9047",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2017-9047"
    },
    {
      "cve": "CVE-2017-8872",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2017-8872"
    },
    {
      "cve": "CVE-2017-7376",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2017-7376"
    },
    {
      "cve": "CVE-2017-7375",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2017-7375"
    },
    {
      "cve": "CVE-2017-5969",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2017-5969"
    },
    {
      "cve": "CVE-2017-5130",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2017-5130"
    },
    {
      "cve": "CVE-2017-5029",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2017-5029"
    },
    {
      "cve": "CVE-2017-18258",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2017-18258"
    },
    {
      "cve": "CVE-2017-16932",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2017-16932"
    },
    {
      "cve": "CVE-2017-16931",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2017-16931"
    },
    {
      "cve": "CVE-2017-15412",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2017-15412"
    },
    {
      "cve": "CVE-2017-1000381",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2017-1000381"
    },
    {
      "cve": "CVE-2017-1000061",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2017-1000061"
    },
    {
      "cve": "CVE-2016-9598",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-9598"
    },
    {
      "cve": "CVE-2016-9597",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-9597"
    },
    {
      "cve": "CVE-2016-9596",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-9596"
    },
    {
      "cve": "CVE-2016-5180",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-5180"
    },
    {
      "cve": "CVE-2016-5131",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-5131"
    },
    {
      "cve": "CVE-2016-4658",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-4658"
    },
    {
      "cve": "CVE-2016-4609",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-4609"
    },
    {
      "cve": "CVE-2016-4607",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-4607"
    },
    {
      "cve": "CVE-2016-4483",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-4483"
    },
    {
      "cve": "CVE-2016-4449",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-4449"
    },
    {
      "cve": "CVE-2016-4448",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-4448"
    },
    {
      "cve": "CVE-2016-4447",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-4447"
    },
    {
      "cve": "CVE-2016-3709",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-3709"
    },
    {
      "cve": "CVE-2016-3705",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-3705"
    },
    {
      "cve": "CVE-2016-3627",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-3627"
    },
    {
      "cve": "CVE-2016-3189",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-3189"
    },
    {
      "cve": "CVE-2016-2073",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-2073"
    },
    {
      "cve": "CVE-2016-1840",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-1840"
    },
    {
      "cve": "CVE-2016-1839",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-1839"
    },
    {
      "cve": "CVE-2016-1838",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-1838"
    },
    {
      "cve": "CVE-2016-1837",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-1837"
    },
    {
      "cve": "CVE-2016-1836",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-1836"
    },
    {
      "cve": "CVE-2016-1834",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-1834"
    },
    {
      "cve": "CVE-2016-1833",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-1833"
    },
    {
      "cve": "CVE-2016-1762",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-1762"
    },
    {
      "cve": "CVE-2016-1684",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-1684"
    },
    {
      "cve": "CVE-2016-1683",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-1683"
    },
    {
      "cve": "CVE-2015-9019",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2015-9019"
    },
    {
      "cve": "CVE-2015-8806",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2015-8806"
    },
    {
      "cve": "CVE-2015-8710",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2015-8710"
    },
    {
      "cve": "CVE-2015-8317",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2015-8317"
    },
    {
      "cve": "CVE-2015-8242",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2015-8242"
    },
    {
      "cve": "CVE-2015-8241",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2015-8241"
    },
    {
      "cve": "CVE-2015-8035",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2015-8035"
    },
    {
      "cve": "CVE-2015-7995",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2015-7995"
    },
    {
      "cve": "CVE-2015-7942",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2015-7942"
    },
    {
      "cve": "CVE-2015-7941",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2015-7941"
    },
    {
      "cve": "CVE-2015-7500",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2015-7500"
    },
    {
      "cve": "CVE-2015-7499",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2015-7499"
    },
    {
      "cve": "CVE-2015-7498",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2015-7498"
    },
    {
      "cve": "CVE-2015-7497",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2015-7497"
    },
    {
      "cve": "CVE-2015-5312",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2015-5312"
    },
    {
      "cve": "CVE-2014-3660",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2014-3660"
    },
    {
      "cve": "CVE-2013-4520",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2013-4520"
    },
    {
      "cve": "CVE-2013-2877",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2013-2877"
    },
    {
      "cve": "CVE-2013-1969",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2013-1969"
    },
    {
      "cve": "CVE-2013-0339",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2013-0339"
    },
    {
      "cve": "CVE-2013-0338",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2013-0338"
    },
    {
      "cve": "CVE-2012-6139",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2012-6139"
    },
    {
      "cve": "CVE-2012-5134",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2012-5134"
    },
    {
      "cve": "CVE-2012-2871",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2012-2871"
    },
    {
      "cve": "CVE-2012-2870",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2012-2870"
    },
    {
      "cve": "CVE-2012-0841",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2012-0841"
    },
    {
      "cve": "CVE-2011-3970",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2011-3970"
    },
    {
      "cve": "CVE-2011-1944",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2011-1944"
    },
    {
      "cve": "CVE-2011-1202",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2011-1202"
    },
    {
      "cve": "CVE-2010-4494",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2010-4494"
    },
    {
      "cve": "CVE-2010-4008",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2010-4008"
    }
  ]
}

{
  "document": {
    "aggregate_severity": {
      "text": "hoch"
    },
    "category": "csaf_base",
    "csaf_version": "2.0",
    "distribution": {
      "tlp": {
        "label": "WHITE",
        "url": "https://www.first.org/tlp/"
      }
    },
    "lang": "de-DE",
    "notes": [
      {
        "category": "legal_disclaimer",
        "text": "Das BSI ist als Anbieter f\u00fcr die eigenen, zur Nutzung bereitgestellten Inhalte nach den allgemeinen Gesetzen verantwortlich. Nutzerinnen und Nutzer sind jedoch daf\u00fcr verantwortlich, die Verwendung und/oder die Umsetzung der mit den Inhalten bereitgestellten Informationen sorgf\u00e4ltig im Einzelfall zu pr\u00fcfen."
      },
      {
        "category": "description",
        "text": "IBM QRadar Security Information and Event Management (SIEM) bietet Unterst\u00fctzung bei der Erkennung und Priorisierung von Sicherheitsbedrohungen im Unternehmen.",
        "title": "Produktbeschreibung"
      },
      {
        "category": "summary",
        "text": "Ein entfernter, anonymer Angreifer kann mehrere Schwachstellen in IBM QRadar SIEM ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden.",
        "title": "Angriff"
      },
      {
        "category": "general",
        "text": "- Linux",
        "title": "Betroffene Betriebssysteme"
      }
    ],
    "publisher": {
      "category": "other",
      "contact_details": "csaf-provider@cert-bund.de",
      "name": "Bundesamt f\u00fcr Sicherheit in der Informationstechnik",
      "namespace": "https://www.bsi.bund.de"
    },
    "references": [
      {
        "category": "self",
        "summary": "WID-SEC-W-2023-0856 - CSAF Version",
        "url": "https://wid.cert-bund.de/.well-known/csaf/white/2022/wid-sec-w-2023-0856.json"
      },
      {
        "category": "self",
        "summary": "WID-SEC-2023-0856 - Portal Version",
        "url": "https://wid.cert-bund.de/portal/wid/securityadvisory?name=WID-SEC-2023-0856"
      },
      {
        "category": "external",
        "summary": "IBM Security Bulletin 6980799 vom 2023-04-04",
        "url": "https://www.ibm.com/support/pages/node/6980799"
      },
      {
        "category": "external",
        "summary": "IBM Security Bulletin vom 2022-05-31",
        "url": "https://www.ibm.com/support/pages/node/6590981"
      }
    ],
    "source_lang": "en-US",
    "title": "IBM QRadar SIEM: Mehrere Schwachstellen",
    "tracking": {
      "current_release_date": "2023-04-04T22:00:00.000+00:00",
      "generator": {
        "date": "2024-02-15T17:22:15.406+00:00",
        "engine": {
          "name": "BSI-WID",
          "version": "1.3.0"
        }
      },
      "id": "WID-SEC-W-2023-0856",
      "initial_release_date": "2022-05-31T22:00:00.000+00:00",
      "revision_history": [
        {
          "date": "2022-05-31T22:00:00.000+00:00",
          "number": "1",
          "summary": "Initiale Fassung"
        },
        {
          "date": "2023-04-04T22:00:00.000+00:00",
          "number": "2",
          "summary": "Neue Updates von IBM aufgenommen"
        }
      ],
      "status": "final",
      "version": "2"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "category": "product_name",
            "name": "IBM QRadar SIEM \u003c 3.0.1",
            "product": {
              "name": "IBM QRadar SIEM \u003c 3.0.1",
              "product_id": "T023376",
              "product_identification_helper": {
                "cpe": "cpe:/a:ibm:qradar_siem:3.0.1"
              }
            }
          }
        ],
        "category": "vendor",
        "name": "IBM"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2020-11655",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2020-11655"
    },
    {
      "cve": "CVE-2020-11656",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2020-11656"
    },
    {
      "cve": "CVE-2020-13434",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2020-13434"
    },
    {
      "cve": "CVE-2020-13435",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2020-13435"
    },
    {
      "cve": "CVE-2020-13630",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2020-13630"
    },
    {
      "cve": "CVE-2020-13631",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2020-13631"
    },
    {
      "cve": "CVE-2020-13632",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2020-13632"
    },
    {
      "cve": "CVE-2020-15168",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2020-15168"
    },
    {
      "cve": "CVE-2020-15358",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2020-15358"
    },
    {
      "cve": "CVE-2020-28469",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2020-28469"
    },
    {
      "cve": "CVE-2020-7788",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2020-7788"
    },
    {
      "cve": "CVE-2020-9327",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2020-9327"
    },
    {
      "cve": "CVE-2021-22918",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2021-22918"
    },
    {
      "cve": "CVE-2021-22930",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2021-22930"
    },
    {
      "cve": "CVE-2021-22931",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2021-22931"
    },
    {
      "cve": "CVE-2021-22939",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2021-22939"
    },
    {
      "cve": "CVE-2021-22940",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2021-22940"
    },
    {
      "cve": "CVE-2021-23343",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2021-23343"
    },
    {
      "cve": "CVE-2021-23362",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2021-23362"
    },
    {
      "cve": "CVE-2021-27290",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2021-27290"
    },
    {
      "cve": "CVE-2021-32803",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2021-32803"
    },
    {
      "cve": "CVE-2021-32804",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2021-32804"
    },
    {
      "cve": "CVE-2021-33502",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2021-33502"
    },
    {
      "cve": "CVE-2021-3672",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2021-3672"
    },
    {
      "cve": "CVE-2021-37701",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2021-37701"
    },
    {
      "cve": "CVE-2021-37712",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2021-37712"
    },
    {
      "cve": "CVE-2021-37713",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2021-37713"
    },
    {
      "cve": "CVE-2021-3807",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2021-3807"
    },
    {
      "cve": "CVE-2021-3918",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2021-3918"
    }
  ]
}

{
  "document": {
    "aggregate_severity": {
      "text": "hoch"
    },
    "category": "csaf_base",
    "csaf_version": "2.0",
    "distribution": {
      "tlp": {
        "label": "WHITE",
        "url": "https://www.first.org/tlp/"
      }
    },
    "lang": "de-DE",
    "notes": [
      {
        "category": "legal_disclaimer",
        "text": "Das BSI ist als Anbieter f\u00fcr die eigenen, zur Nutzung bereitgestellten Inhalte nach den allgemeinen Gesetzen verantwortlich. Nutzerinnen und Nutzer sind jedoch daf\u00fcr verantwortlich, die Verwendung und/oder die Umsetzung der mit den Inhalten bereitgestellten Informationen sorgf\u00e4ltig im Einzelfall zu pr\u00fcfen."
      },
      {
        "category": "description",
        "text": "Tenable Nessus Network Monitor ist eine L\u00f6sung zur Inventarisierung und \u00dcberwachung von Netzwerkger\u00e4ten und den genutzten Protokollen.",
        "title": "Produktbeschreibung"
      },
      {
        "category": "summary",
        "text": "Ein entfernter, anonymer, authentisierter oder lokaler Angreifer kann mehrere Schwachstellen in Tenable Security Nessus Network Monitor ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren.",
        "title": "Angriff"
      },
      {
        "category": "general",
        "text": "- Sonstiges",
        "title": "Betroffene Betriebssysteme"
      }
    ],
    "publisher": {
      "category": "other",
      "contact_details": "csaf-provider@cert-bund.de",
      "name": "Bundesamt f\u00fcr Sicherheit in der Informationstechnik",
      "namespace": "https://www.bsi.bund.de"
    },
    "references": [
      {
        "category": "self",
        "summary": "WID-SEC-W-2023-1614 - CSAF Version",
        "url": "https://wid.cert-bund.de/.well-known/csaf/white/2023/wid-sec-w-2023-1614.json"
      },
      {
        "category": "self",
        "summary": "WID-SEC-2023-1614 - Portal Version",
        "url": "https://wid.cert-bund.de/portal/wid/securityadvisory?name=WID-SEC-2023-1614"
      },
      {
        "category": "external",
        "summary": "Tenable Security Advisory TNS-2023-34 vom 2023-10-25",
        "url": "https://de.tenable.com/security/tns-2023-34"
      },
      {
        "category": "external",
        "summary": "Tenable Security Advisory vom 2023-06-29",
        "url": "https://de.tenable.com/security/tns-2023-23"
      }
    ],
    "source_lang": "en-US",
    "title": "Tenable Security Nessus Network Monitor: Mehrere Schwachstellen",
    "tracking": {
      "current_release_date": "2023-10-25T22:00:00.000+00:00",
      "generator": {
        "date": "2024-02-15T17:33:55.765+00:00",
        "engine": {
          "name": "BSI-WID",
          "version": "1.3.0"
        }
      },
      "id": "WID-SEC-W-2023-1614",
      "initial_release_date": "2023-06-29T22:00:00.000+00:00",
      "revision_history": [
        {
          "date": "2023-06-29T22:00:00.000+00:00",
          "number": "1",
          "summary": "Initiale Fassung"
        },
        {
          "date": "2023-07-03T22:00:00.000+00:00",
          "number": "2",
          "summary": "Produkt berichtigt"
        },
        {
          "date": "2023-10-25T22:00:00.000+00:00",
          "number": "3",
          "summary": "Neue Updates von Tenable aufgenommen"
        }
      ],
      "status": "final",
      "version": "3"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "category": "product_name",
            "name": "Tenable Security Nessus Network Monitor \u003c 6.2.2",
            "product": {
              "name": "Tenable Security Nessus Network Monitor \u003c 6.2.2",
              "product_id": "T028403",
              "product_identification_helper": {
                "cpe": "cpe:/a:tenable:nessus_network_monitor:6.2.2"
              }
            }
          }
        ],
        "category": "vendor",
        "name": "Tenable Security"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2023-32067",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-32067"
    },
    {
      "cve": "CVE-2023-31147",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-31147"
    },
    {
      "cve": "CVE-2023-31130",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-31130"
    },
    {
      "cve": "CVE-2023-31124",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-31124"
    },
    {
      "cve": "CVE-2023-29469",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-29469"
    },
    {
      "cve": "CVE-2023-28484",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-28484"
    },
    {
      "cve": "CVE-2023-28322",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-28322"
    },
    {
      "cve": "CVE-2023-28321",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-28321"
    },
    {
      "cve": "CVE-2023-28320",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-28320"
    },
    {
      "cve": "CVE-2023-27538",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-27538"
    },
    {
      "cve": "CVE-2023-27536",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-27536"
    },
    {
      "cve": "CVE-2023-27535",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-27535"
    },
    {
      "cve": "CVE-2023-27534",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-27534"
    },
    {
      "cve": "CVE-2023-27533",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-27533"
    },
    {
      "cve": "CVE-2023-2650",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-2650"
    },
    {
      "cve": "CVE-2023-23916",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-23916"
    },
    {
      "cve": "CVE-2023-23915",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-23915"
    },
    {
      "cve": "CVE-2023-23914",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-23914"
    },
    {
      "cve": "CVE-2023-1255",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-1255"
    },
    {
      "cve": "CVE-2023-0466",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-0466"
    },
    {
      "cve": "CVE-2023-0465",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2023-0465"
    },
    {
      "cve": "CVE-2022-4904",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-4904"
    },
    {
      "cve": "CVE-2022-46908",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-46908"
    },
    {
      "cve": "CVE-2022-43552",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-43552"
    },
    {
      "cve": "CVE-2022-43551",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-43551"
    },
    {
      "cve": "CVE-2022-42916",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-42916"
    },
    {
      "cve": "CVE-2022-42915",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-42915"
    },
    {
      "cve": "CVE-2022-40304",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-40304"
    },
    {
      "cve": "CVE-2022-40303",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-40303"
    },
    {
      "cve": "CVE-2022-35737",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-35737"
    },
    {
      "cve": "CVE-2022-35252",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-35252"
    },
    {
      "cve": "CVE-2022-32221",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-32221"
    },
    {
      "cve": "CVE-2022-32208",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-32208"
    },
    {
      "cve": "CVE-2022-32207",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-32207"
    },
    {
      "cve": "CVE-2022-32206",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-32206"
    },
    {
      "cve": "CVE-2022-32205",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-32205"
    },
    {
      "cve": "CVE-2022-31160",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-31160"
    },
    {
      "cve": "CVE-2022-29824",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-29824"
    },
    {
      "cve": "CVE-2022-27782",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-27782"
    },
    {
      "cve": "CVE-2022-27781",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-27781"
    },
    {
      "cve": "CVE-2022-27776",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-27776"
    },
    {
      "cve": "CVE-2022-27775",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-27775"
    },
    {
      "cve": "CVE-2022-27774",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-27774"
    },
    {
      "cve": "CVE-2022-23395",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-23395"
    },
    {
      "cve": "CVE-2022-23308",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-23308"
    },
    {
      "cve": "CVE-2022-22576",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2022-22576"
    },
    {
      "cve": "CVE-2021-45346",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2021-45346"
    },
    {
      "cve": "CVE-2021-3672",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2021-3672"
    },
    {
      "cve": "CVE-2021-36690",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2021-36690"
    },
    {
      "cve": "CVE-2021-3541",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2021-3541"
    },
    {
      "cve": "CVE-2021-3537",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2021-3537"
    },
    {
      "cve": "CVE-2021-3518",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2021-3518"
    },
    {
      "cve": "CVE-2021-3517",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2021-3517"
    },
    {
      "cve": "CVE-2021-31239",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2021-31239"
    },
    {
      "cve": "CVE-2021-30560",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2021-30560"
    },
    {
      "cve": "CVE-2021-20227",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2021-20227"
    },
    {
      "cve": "CVE-2020-9327",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2020-9327"
    },
    {
      "cve": "CVE-2020-7595",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2020-7595"
    },
    {
      "cve": "CVE-2020-35527",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2020-35527"
    },
    {
      "cve": "CVE-2020-35525",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2020-35525"
    },
    {
      "cve": "CVE-2020-24977",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2020-24977"
    },
    {
      "cve": "CVE-2020-15358",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2020-15358"
    },
    {
      "cve": "CVE-2020-14155",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2020-14155"
    },
    {
      "cve": "CVE-2020-13871",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2020-13871"
    },
    {
      "cve": "CVE-2020-13632",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2020-13632"
    },
    {
      "cve": "CVE-2020-13631",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2020-13631"
    },
    {
      "cve": "CVE-2020-13630",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2020-13630"
    },
    {
      "cve": "CVE-2020-13435",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2020-13435"
    },
    {
      "cve": "CVE-2020-13434",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2020-13434"
    },
    {
      "cve": "CVE-2020-11656",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2020-11656"
    },
    {
      "cve": "CVE-2020-11655",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2020-11655"
    },
    {
      "cve": "CVE-2019-9937",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-9937"
    },
    {
      "cve": "CVE-2019-9936",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-9936"
    },
    {
      "cve": "CVE-2019-8457",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-8457"
    },
    {
      "cve": "CVE-2019-5815",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-5815"
    },
    {
      "cve": "CVE-2019-20838",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-20838"
    },
    {
      "cve": "CVE-2019-20388",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-20388"
    },
    {
      "cve": "CVE-2019-20218",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-20218"
    },
    {
      "cve": "CVE-2019-19959",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-19959"
    },
    {
      "cve": "CVE-2019-19956",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-19956"
    },
    {
      "cve": "CVE-2019-19926",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-19926"
    },
    {
      "cve": "CVE-2019-19925",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-19925"
    },
    {
      "cve": "CVE-2019-19924",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-19924"
    },
    {
      "cve": "CVE-2019-19923",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-19923"
    },
    {
      "cve": "CVE-2019-19880",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-19880"
    },
    {
      "cve": "CVE-2019-19646",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-19646"
    },
    {
      "cve": "CVE-2019-19645",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-19645"
    },
    {
      "cve": "CVE-2019-19603",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-19603"
    },
    {
      "cve": "CVE-2019-19317",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-19317"
    },
    {
      "cve": "CVE-2019-19244",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-19244"
    },
    {
      "cve": "CVE-2019-19242",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-19242"
    },
    {
      "cve": "CVE-2019-16168",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-16168"
    },
    {
      "cve": "CVE-2019-13118",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-13118"
    },
    {
      "cve": "CVE-2019-13117",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-13117"
    },
    {
      "cve": "CVE-2019-12900",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-12900"
    },
    {
      "cve": "CVE-2019-11068",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2019-11068"
    },
    {
      "cve": "CVE-2018-9251",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2018-9251"
    },
    {
      "cve": "CVE-2018-14567",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2018-14567"
    },
    {
      "cve": "CVE-2018-14404",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2018-14404"
    },
    {
      "cve": "CVE-2017-9050",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2017-9050"
    },
    {
      "cve": "CVE-2017-9049",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2017-9049"
    },
    {
      "cve": "CVE-2017-9048",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2017-9048"
    },
    {
      "cve": "CVE-2017-9047",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2017-9047"
    },
    {
      "cve": "CVE-2017-8872",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2017-8872"
    },
    {
      "cve": "CVE-2017-7376",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2017-7376"
    },
    {
      "cve": "CVE-2017-7375",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2017-7375"
    },
    {
      "cve": "CVE-2017-5969",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2017-5969"
    },
    {
      "cve": "CVE-2017-5130",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2017-5130"
    },
    {
      "cve": "CVE-2017-5029",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2017-5029"
    },
    {
      "cve": "CVE-2017-18258",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2017-18258"
    },
    {
      "cve": "CVE-2017-16932",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2017-16932"
    },
    {
      "cve": "CVE-2017-16931",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2017-16931"
    },
    {
      "cve": "CVE-2017-15412",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2017-15412"
    },
    {
      "cve": "CVE-2017-1000381",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2017-1000381"
    },
    {
      "cve": "CVE-2017-1000061",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2017-1000061"
    },
    {
      "cve": "CVE-2016-9598",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-9598"
    },
    {
      "cve": "CVE-2016-9597",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-9597"
    },
    {
      "cve": "CVE-2016-9596",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-9596"
    },
    {
      "cve": "CVE-2016-5180",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-5180"
    },
    {
      "cve": "CVE-2016-5131",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-5131"
    },
    {
      "cve": "CVE-2016-4658",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-4658"
    },
    {
      "cve": "CVE-2016-4609",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-4609"
    },
    {
      "cve": "CVE-2016-4607",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-4607"
    },
    {
      "cve": "CVE-2016-4483",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-4483"
    },
    {
      "cve": "CVE-2016-4449",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-4449"
    },
    {
      "cve": "CVE-2016-4448",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-4448"
    },
    {
      "cve": "CVE-2016-4447",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-4447"
    },
    {
      "cve": "CVE-2016-3709",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-3709"
    },
    {
      "cve": "CVE-2016-3705",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-3705"
    },
    {
      "cve": "CVE-2016-3627",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-3627"
    },
    {
      "cve": "CVE-2016-3189",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-3189"
    },
    {
      "cve": "CVE-2016-2073",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-2073"
    },
    {
      "cve": "CVE-2016-1840",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-1840"
    },
    {
      "cve": "CVE-2016-1839",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-1839"
    },
    {
      "cve": "CVE-2016-1838",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-1838"
    },
    {
      "cve": "CVE-2016-1837",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-1837"
    },
    {
      "cve": "CVE-2016-1836",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-1836"
    },
    {
      "cve": "CVE-2016-1834",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-1834"
    },
    {
      "cve": "CVE-2016-1833",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-1833"
    },
    {
      "cve": "CVE-2016-1762",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-1762"
    },
    {
      "cve": "CVE-2016-1684",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-1684"
    },
    {
      "cve": "CVE-2016-1683",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2016-1683"
    },
    {
      "cve": "CVE-2015-9019",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2015-9019"
    },
    {
      "cve": "CVE-2015-8806",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2015-8806"
    },
    {
      "cve": "CVE-2015-8710",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2015-8710"
    },
    {
      "cve": "CVE-2015-8317",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2015-8317"
    },
    {
      "cve": "CVE-2015-8242",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2015-8242"
    },
    {
      "cve": "CVE-2015-8241",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2015-8241"
    },
    {
      "cve": "CVE-2015-8035",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2015-8035"
    },
    {
      "cve": "CVE-2015-7995",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2015-7995"
    },
    {
      "cve": "CVE-2015-7942",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2015-7942"
    },
    {
      "cve": "CVE-2015-7941",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2015-7941"
    },
    {
      "cve": "CVE-2015-7500",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2015-7500"
    },
    {
      "cve": "CVE-2015-7499",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2015-7499"
    },
    {
      "cve": "CVE-2015-7498",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2015-7498"
    },
    {
      "cve": "CVE-2015-7497",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2015-7497"
    },
    {
      "cve": "CVE-2015-5312",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2015-5312"
    },
    {
      "cve": "CVE-2014-3660",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2014-3660"
    },
    {
      "cve": "CVE-2013-4520",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2013-4520"
    },
    {
      "cve": "CVE-2013-2877",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2013-2877"
    },
    {
      "cve": "CVE-2013-1969",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2013-1969"
    },
    {
      "cve": "CVE-2013-0339",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2013-0339"
    },
    {
      "cve": "CVE-2013-0338",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2013-0338"
    },
    {
      "cve": "CVE-2012-6139",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2012-6139"
    },
    {
      "cve": "CVE-2012-5134",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2012-5134"
    },
    {
      "cve": "CVE-2012-2871",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2012-2871"
    },
    {
      "cve": "CVE-2012-2870",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2012-2870"
    },
    {
      "cve": "CVE-2012-0841",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2012-0841"
    },
    {
      "cve": "CVE-2011-3970",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2011-3970"
    },
    {
      "cve": "CVE-2011-1944",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2011-1944"
    },
    {
      "cve": "CVE-2011-1202",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2011-1202"
    },
    {
      "cve": "CVE-2010-4494",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2010-4494"
    },
    {
      "cve": "CVE-2010-4008",
      "notes": [
        {
          "category": "description",
          "text": "In Tenable Security Nessus Network Monitor existieren mehrere Schwachstellen. Die Fehler bestehen unter anderem in Komponenten von Drittanbietern wie c-ares, curl, libbzip2, libpcre, libxml2, sqlite und OpenSSL. Ein Angreifer kann diese Schwachstellen ausnutzen, um beliebigen Code auszuf\u00fchren, vertrauliche Informationen offenzulegen, einen Denial-of-Service-Zustand auszul\u00f6sen und Daten zu manipulieren. Die erfolgreiche Ausnutzung einiger dieser Schwachstellen erfordert eine Benutzerinteraktion oder erh\u00f6hte Rechte."
        }
      ],
      "release_date": "2023-06-29T22:00:00Z",
      "title": "CVE-2010-4008"
    }
  ]
}

{
  "document": {
    "aggregate_severity": {
      "text": "hoch"
    },
    "category": "csaf_base",
    "csaf_version": "2.0",
    "distribution": {
      "tlp": {
        "label": "WHITE",
        "url": "https://www.first.org/tlp/"
      }
    },
    "lang": "de-DE",
    "notes": [
      {
        "category": "legal_disclaimer",
        "text": "Das BSI ist als Anbieter f\u00fcr die eigenen, zur Nutzung bereitgestellten Inhalte nach den allgemeinen Gesetzen verantwortlich. Nutzerinnen und Nutzer sind jedoch daf\u00fcr verantwortlich, die Verwendung und/oder die Umsetzung der mit den Inhalten bereitgestellten Informationen sorgf\u00e4ltig im Einzelfall zu pr\u00fcfen."
      },
      {
        "category": "description",
        "text": "IBM QRadar Security Information and Event Management (SIEM) bietet Unterst\u00fctzung bei der Erkennung und Priorisierung von Sicherheitsbedrohungen im Unternehmen.",
        "title": "Produktbeschreibung"
      },
      {
        "category": "summary",
        "text": "Ein entfernter, anonymer Angreifer kann mehrere Schwachstellen in IBM QRadar SIEM ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden.",
        "title": "Angriff"
      },
      {
        "category": "general",
        "text": "- Linux",
        "title": "Betroffene Betriebssysteme"
      }
    ],
    "publisher": {
      "category": "other",
      "contact_details": "csaf-provider@cert-bund.de",
      "name": "Bundesamt f\u00fcr Sicherheit in der Informationstechnik",
      "namespace": "https://www.bsi.bund.de"
    },
    "references": [
      {
        "category": "self",
        "summary": "WID-SEC-W-2023-0856 - CSAF Version",
        "url": "https://wid.cert-bund.de/.well-known/csaf/white/2022/wid-sec-w-2023-0856.json"
      },
      {
        "category": "self",
        "summary": "WID-SEC-2023-0856 - Portal Version",
        "url": "https://wid.cert-bund.de/portal/wid/securityadvisory?name=WID-SEC-2023-0856"
      },
      {
        "category": "external",
        "summary": "IBM Security Bulletin 6980799 vom 2023-04-04",
        "url": "https://www.ibm.com/support/pages/node/6980799"
      },
      {
        "category": "external",
        "summary": "IBM Security Bulletin vom 2022-05-31",
        "url": "https://www.ibm.com/support/pages/node/6590981"
      }
    ],
    "source_lang": "en-US",
    "title": "IBM QRadar SIEM: Mehrere Schwachstellen",
    "tracking": {
      "current_release_date": "2023-04-04T22:00:00.000+00:00",
      "generator": {
        "date": "2024-02-15T17:22:15.406+00:00",
        "engine": {
          "name": "BSI-WID",
          "version": "1.3.0"
        }
      },
      "id": "WID-SEC-W-2023-0856",
      "initial_release_date": "2022-05-31T22:00:00.000+00:00",
      "revision_history": [
        {
          "date": "2022-05-31T22:00:00.000+00:00",
          "number": "1",
          "summary": "Initiale Fassung"
        },
        {
          "date": "2023-04-04T22:00:00.000+00:00",
          "number": "2",
          "summary": "Neue Updates von IBM aufgenommen"
        }
      ],
      "status": "final",
      "version": "2"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "category": "product_name",
            "name": "IBM QRadar SIEM \u003c 3.0.1",
            "product": {
              "name": "IBM QRadar SIEM \u003c 3.0.1",
              "product_id": "T023376",
              "product_identification_helper": {
                "cpe": "cpe:/a:ibm:qradar_siem:3.0.1"
              }
            }
          }
        ],
        "category": "vendor",
        "name": "IBM"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2020-11655",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2020-11655"
    },
    {
      "cve": "CVE-2020-11656",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2020-11656"
    },
    {
      "cve": "CVE-2020-13434",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2020-13434"
    },
    {
      "cve": "CVE-2020-13435",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2020-13435"
    },
    {
      "cve": "CVE-2020-13630",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2020-13630"
    },
    {
      "cve": "CVE-2020-13631",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2020-13631"
    },
    {
      "cve": "CVE-2020-13632",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2020-13632"
    },
    {
      "cve": "CVE-2020-15168",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2020-15168"
    },
    {
      "cve": "CVE-2020-15358",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2020-15358"
    },
    {
      "cve": "CVE-2020-28469",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2020-28469"
    },
    {
      "cve": "CVE-2020-7788",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2020-7788"
    },
    {
      "cve": "CVE-2020-9327",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2020-9327"
    },
    {
      "cve": "CVE-2021-22918",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2021-22918"
    },
    {
      "cve": "CVE-2021-22930",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2021-22930"
    },
    {
      "cve": "CVE-2021-22931",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2021-22931"
    },
    {
      "cve": "CVE-2021-22939",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2021-22939"
    },
    {
      "cve": "CVE-2021-22940",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2021-22940"
    },
    {
      "cve": "CVE-2021-23343",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2021-23343"
    },
    {
      "cve": "CVE-2021-23362",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2021-23362"
    },
    {
      "cve": "CVE-2021-27290",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2021-27290"
    },
    {
      "cve": "CVE-2021-32803",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2021-32803"
    },
    {
      "cve": "CVE-2021-32804",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2021-32804"
    },
    {
      "cve": "CVE-2021-33502",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2021-33502"
    },
    {
      "cve": "CVE-2021-3672",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2021-3672"
    },
    {
      "cve": "CVE-2021-37701",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2021-37701"
    },
    {
      "cve": "CVE-2021-37712",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2021-37712"
    },
    {
      "cve": "CVE-2021-37713",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2021-37713"
    },
    {
      "cve": "CVE-2021-3807",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2021-3807"
    },
    {
      "cve": "CVE-2021-3918",
      "notes": [
        {
          "category": "description",
          "text": "In IBM QRadar SIEM existieren mehrere Schwachstellen im Zusammenhang mit bekannten Sicherheitsl\u00fccken in den Komponenten Node.js und SQLite. Ein Angreifer kann diese Schwachstellen ausnutzen, um die Vertraulichkeit, Integrit\u00e4t und Verf\u00fcgbarkeit zu gef\u00e4hrden."
        }
      ],
      "release_date": "2022-05-31T22:00:00Z",
      "title": "CVE-2021-3918"
    }
  ]
}

{
  "GSD": {
    "alias": "CVE-2020-13434",
    "description": "SQLite through 3.32.0 has an integer overflow in sqlite3_str_vappendf in printf.c.",
    "id": "GSD-2020-13434",
    "references": [
      "https://www.suse.com/security/cve/CVE-2020-13434.html",
      "https://access.redhat.com/errata/RHSA-2021:1968",
      "https://access.redhat.com/errata/RHSA-2021:1581",
      "https://ubuntu.com/security/CVE-2020-13434",
      "https://advisories.mageia.org/CVE-2020-13434.html",
      "https://linux.oracle.com/cve/CVE-2020-13434.html"
    ]
  },
  "gsd": {
    "metadata": {
      "exploitCode": "unknown",
      "remediation": "unknown",
      "reportConfidence": "confirmed",
      "type": "vulnerability"
    },
    "osvSchema": {
      "aliases": [
        "CVE-2020-13434"
      ],
      "details": "SQLite through 3.32.0 has an integer overflow in sqlite3_str_vappendf in printf.c.",
      "id": "GSD-2020-13434",
      "modified": "2023-12-13T01:21:47.266120Z",
      "schema_version": "1.4.0"
    }
  },
  "namespaces": {
    "cve.org": {
      "CVE_data_meta": {
        "ASSIGNER": "cve@mitre.org",
        "ID": "CVE-2020-13434",
        "STATE": "PUBLIC"
      },
      "affects": {
        "vendor": {
          "vendor_data": [
            {
              "product": {
                "product_data": [
                  {
                    "product_name": "n/a",
                    "version": {
                      "version_data": [
                        {
                          "version_value": "n/a"
                        }
                      ]
                    }
                  }
                ]
              },
              "vendor_name": "n/a"
            }
          ]
        }
      },
      "data_format": "MITRE",
      "data_type": "CVE",
      "data_version": "4.0",
      "description": {
        "description_data": [
          {
            "lang": "eng",
            "value": "SQLite through 3.32.0 has an integer overflow in sqlite3_str_vappendf in printf.c."
          }
        ]
      },
      "problemtype": {
        "problemtype_data": [
          {
            "description": [
              {
                "lang": "eng",
                "value": "n/a"
              }
            ]
          }
        ]
      },
      "references": {
        "reference_data": [
          {
            "name": "[debian-lts-announce] 20200526 [SECURITY] [DLA 2221-1] sqlite3",
            "refsource": "MLIST",
            "url": "https://lists.debian.org/debian-lts-announce/2020/05/msg00024.html"
          },
          {
            "name": "FEDORA-2020-0477f8840e",
            "refsource": "FEDORA",
            "url": "https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/L7KXQWHIY2MQP4LNM6ODWJENMXYYQYBN/"
          },
          {
            "name": "USN-4394-1",
            "refsource": "UBUNTU",
            "url": "https://usn.ubuntu.com/4394-1/"
          },
          {
            "name": "https://www.oracle.com/security-alerts/cpujul2020.html",
            "refsource": "MISC",
            "url": "https://www.oracle.com/security-alerts/cpujul2020.html"
          },
          {
            "name": "https://www.sqlite.org/src/info/23439ea582241138",
            "refsource": "MISC",
            "url": "https://www.sqlite.org/src/info/23439ea582241138"
          },
          {
            "name": "https://www.sqlite.org/src/info/d08d3405878d394e",
            "refsource": "MISC",
            "url": "https://www.sqlite.org/src/info/d08d3405878d394e"
          },
          {
            "name": "https://security.netapp.com/advisory/ntap-20200528-0004/",
            "refsource": "CONFIRM",
            "url": "https://security.netapp.com/advisory/ntap-20200528-0004/"
          },
          {
            "name": "GLSA-202007-26",
            "refsource": "GENTOO",
            "url": "https://security.gentoo.org/glsa/202007-26"
          },
          {
            "name": "FreeBSD-SA-20:22",
            "refsource": "FREEBSD",
            "url": "https://security.FreeBSD.org/advisories/FreeBSD-SA-20:22.sqlite.asc"
          },
          {
            "name": "[debian-lts-announce] 20200822 [SECURITY] [DLA 2340-1] sqlite3 security update",
            "refsource": "MLIST",
            "url": "https://lists.debian.org/debian-lts-announce/2020/08/msg00037.html"
          },
          {
            "name": "20201115 APPLE-SA-2020-11-13-4 Additional information for APPLE-SA-2020-09-16-2 tvOS 14.0",
            "refsource": "FULLDISC",
            "url": "http://seclists.org/fulldisclosure/2020/Nov/19"
          },
          {
            "name": "20201115 APPLE-SA-2020-11-13-3 Additional information for APPLE-SA-2020-09-16-1 iOS 14.0 and iPadOS 14.0",
            "refsource": "FULLDISC",
            "url": "http://seclists.org/fulldisclosure/2020/Nov/20"
          },
          {
            "name": "20201115 APPLE-SA-2020-11-13-6 Additional information for APPLE-SA-2020-09-16-4 watchOS 7.0",
            "refsource": "FULLDISC",
            "url": "http://seclists.org/fulldisclosure/2020/Nov/22"
          },
          {
            "name": "20201215 APPLE-SA-2020-12-14-4 Additional information for APPLE-SA-2020-11-13-1 macOS Big Sur 11.0.1",
            "refsource": "FULLDISC",
            "url": "http://seclists.org/fulldisclosure/2020/Dec/32"
          },
          {
            "name": "https://support.apple.com/kb/HT211843",
            "refsource": "CONFIRM",
            "url": "https://support.apple.com/kb/HT211843"
          },
          {
            "name": "https://support.apple.com/kb/HT211850",
            "refsource": "CONFIRM",
            "url": "https://support.apple.com/kb/HT211850"
          },
          {
            "name": "https://support.apple.com/kb/HT211844",
            "refsource": "CONFIRM",
            "url": "https://support.apple.com/kb/HT211844"
          },
          {
            "name": "https://support.apple.com/kb/HT211931",
            "refsource": "CONFIRM",
            "url": "https://support.apple.com/kb/HT211931"
          },
          {
            "name": "https://www.oracle.com/security-alerts/cpuApr2021.html",
            "refsource": "MISC",
            "url": "https://www.oracle.com/security-alerts/cpuApr2021.html"
          },
          {
            "name": "https://support.apple.com/kb/HT211952",
            "refsource": "CONFIRM",
            "url": "https://support.apple.com/kb/HT211952"
          },
          {
            "name": "https://support.apple.com/kb/HT211935",
            "refsource": "CONFIRM",
            "url": "https://support.apple.com/kb/HT211935"
          },
          {
            "name": "https://www.oracle.com/security-alerts/cpuapr2022.html",
            "refsource": "MISC",
            "url": "https://www.oracle.com/security-alerts/cpuapr2022.html"
          }
        ]
      }
    },
    "nvd.nist.gov": {
      "configurations": {
        "CVE_data_version": "4.0",
        "nodes": [
          {
            "children": [],
            "cpe_match": [
              {
                "cpe23Uri": "cpe:2.3:a:sqlite:sqlite:*:*:*:*:*:*:*:*",
                "cpe_name": [],
                "versionEndIncluding": "3.32.0",
                "vulnerable": true
              }
            ],
            "operator": "OR"
          },
          {
            "children": [],
            "cpe_match": [
              {
                "cpe23Uri": "cpe:2.3:o:debian:debian_linux:8.0:*:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:debian:debian_linux:9.0:*:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              }
            ],
            "operator": "OR"
          },
          {
            "children": [],
            "cpe_match": [
              {
                "cpe23Uri": "cpe:2.3:o:fedoraproject:fedora:32:*:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              }
            ],
            "operator": "OR"
          },
          {
            "children": [],
            "cpe_match": [
              {
                "cpe23Uri": "cpe:2.3:o:canonical:ubuntu_linux:18.04:*:*:*:lts:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:canonical:ubuntu_linux:19.10:*:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:canonical:ubuntu_linux:20.04:*:*:*:lts:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:canonical:ubuntu_linux:16.04:*:*:*:esm:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              }
            ],
            "operator": "OR"
          },
          {
            "children": [],
            "cpe_match": [
              {
                "cpe23Uri": "cpe:2.3:o:freebsd:freebsd:12.0:p1:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:freebsd:freebsd:12.0:-:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:freebsd:freebsd:12.0:p3:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:freebsd:freebsd:12.0:p2:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:freebsd:freebsd:12.0:p4:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:freebsd:freebsd:12.0:p5:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:freebsd:freebsd:12.0:p6:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:freebsd:freebsd:12.0:p8:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:freebsd:freebsd:12.1:p1:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:freebsd:freebsd:12.1:-:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:freebsd:freebsd:12.0:p7:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:freebsd:freebsd:12.0:p9:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:freebsd:freebsd:12.0:p10:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:freebsd:freebsd:12.0:p11:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:freebsd:freebsd:12.0:p12:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:freebsd:freebsd:12.1:p2:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:freebsd:freebsd:12.1:p3:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:freebsd:freebsd:12.1:p4:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:freebsd:freebsd:11.4:-:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:freebsd:freebsd:12.1:p5:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:freebsd:freebsd:12.1:p6:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:freebsd:freebsd:11.4:p1:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:freebsd:freebsd:12.1:p7:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:freebsd:freebsd:*:*:*:*:*:*:*:*",
                "cpe_name": [],
                "versionEndExcluding": "11.4",
                "versionStartIncluding": "11.0",
                "vulnerable": true
              }
            ],
            "operator": "OR"
          },
          {
            "children": [],
            "cpe_match": [
              {
                "cpe23Uri": "cpe:2.3:a:oracle:outside_in_technology:8.5.5:*:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:a:oracle:communications_network_charging_and_control:6.0.1:*:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:a:oracle:communications_network_charging_and_control:*:*:*:*:*:*:*:*",
                "cpe_name": [],
                "versionEndIncluding": "12.0.3",
                "versionStartIncluding": "12.0.0",
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:a:oracle:communications_cloud_native_core_policy:1.14.0:*:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              }
            ],
            "operator": "OR"
          },
          {
            "children": [],
            "cpe_match": [
              {
                "cpe23Uri": "cpe:2.3:o:apple:iphone_os:*:*:*:*:*:*:*:*",
                "cpe_name": [],
                "versionEndExcluding": "14.0",
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:apple:watchos:*:*:*:*:*:*:*:*",
                "cpe_name": [],
                "versionEndExcluding": "7.0",
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:apple:tvos:*:*:*:*:*:*:*:*",
                "cpe_name": [],
                "versionEndExcluding": "14.0",
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:apple:ipados:*:*:*:*:*:*:*:*",
                "cpe_name": [],
                "versionEndExcluding": "14.0",
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:a:apple:icloud:*:*:*:*:*:windows:*:*",
                "cpe_name": [],
                "versionEndExcluding": "11.5",
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:a:apple:itunes:*:*:*:*:*:windows:*:*",
                "cpe_name": [],
                "versionEndExcluding": "12.10.9",
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:apple:macos:*:*:*:*:*:*:*:*",
                "cpe_name": [],
                "versionEndExcluding": "11.0.1",
                "versionStartIncluding": "11.0",
                "vulnerable": true
              }
            ],
            "operator": "OR"
          }
        ]
      },
      "cve": {
        "CVE_data_meta": {
          "ASSIGNER": "cve@mitre.org",
          "ID": "CVE-2020-13434"
        },
        "data_format": "MITRE",
        "data_type": "CVE",
        "data_version": "4.0",
        "description": {
          "description_data": [
            {
              "lang": "en",
              "value": "SQLite through 3.32.0 has an integer overflow in sqlite3_str_vappendf in printf.c."
            }
          ]
        },
        "problemtype": {
          "problemtype_data": [
            {
              "description": [
                {
                  "lang": "en",
                  "value": "CWE-190"
                }
              ]
            }
          ]
        },
        "references": {
          "reference_data": [
            {
              "name": "https://www.sqlite.org/src/info/23439ea582241138",
              "refsource": "MISC",
              "tags": [
                "Exploit",
                "Patch",
                "Vendor Advisory"
              ],
              "url": "https://www.sqlite.org/src/info/23439ea582241138"
            },
            {
              "name": "https://www.sqlite.org/src/info/d08d3405878d394e",
              "refsource": "MISC",
              "tags": [
                "Patch",
                "Vendor Advisory"
              ],
              "url": "https://www.sqlite.org/src/info/d08d3405878d394e"
            },
            {
              "name": "[debian-lts-announce] 20200526 [SECURITY] [DLA 2221-1] sqlite3",
              "refsource": "MLIST",
              "tags": [
                "Mailing List",
                "Third Party Advisory"
              ],
              "url": "https://lists.debian.org/debian-lts-announce/2020/05/msg00024.html"
            },
            {
              "name": "https://security.netapp.com/advisory/ntap-20200528-0004/",
              "refsource": "CONFIRM",
              "tags": [
                "Third Party Advisory"
              ],
              "url": "https://security.netapp.com/advisory/ntap-20200528-0004/"
            },
            {
              "name": "FEDORA-2020-0477f8840e",
              "refsource": "FEDORA",
              "tags": [
                "Mailing List",
                "Third Party Advisory"
              ],
              "url": "https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/L7KXQWHIY2MQP4LNM6ODWJENMXYYQYBN/"
            },
            {
              "name": "USN-4394-1",
              "refsource": "UBUNTU",
              "tags": [
                "Third Party Advisory"
              ],
              "url": "https://usn.ubuntu.com/4394-1/"
            },
            {
              "name": "https://www.oracle.com/security-alerts/cpujul2020.html",
              "refsource": "MISC",
              "tags": [
                "Patch",
                "Third Party Advisory"
              ],
              "url": "https://www.oracle.com/security-alerts/cpujul2020.html"
            },
            {
              "name": "GLSA-202007-26",
              "refsource": "GENTOO",
              "tags": [
                "Third Party Advisory"
              ],
              "url": "https://security.gentoo.org/glsa/202007-26"
            },
            {
              "name": "FreeBSD-SA-20:22",
              "refsource": "FREEBSD",
              "tags": [
                "Third Party Advisory"
              ],
              "url": "https://security.FreeBSD.org/advisories/FreeBSD-SA-20:22.sqlite.asc"
            },
            {
              "name": "[debian-lts-announce] 20200822 [SECURITY] [DLA 2340-1] sqlite3 security update",
              "refsource": "MLIST",
              "tags": [
                "Mailing List",
                "Third Party Advisory"
              ],
              "url": "https://lists.debian.org/debian-lts-announce/2020/08/msg00037.html"
            },
            {
              "name": "https://support.apple.com/kb/HT211931",
              "refsource": "CONFIRM",
              "tags": [
                "Third Party Advisory"
              ],
              "url": "https://support.apple.com/kb/HT211931"
            },
            {
              "name": "https://support.apple.com/kb/HT211844",
              "refsource": "CONFIRM",
              "tags": [
                "Third Party Advisory"
              ],
              "url": "https://support.apple.com/kb/HT211844"
            },
            {
              "name": "https://support.apple.com/kb/HT211850",
              "refsource": "CONFIRM",
              "tags": [
                "Third Party Advisory"
              ],
              "url": "https://support.apple.com/kb/HT211850"
            },
            {
              "name": "https://support.apple.com/kb/HT211843",
              "refsource": "CONFIRM",
              "tags": [
                "Third Party Advisory"
              ],
              "url": "https://support.apple.com/kb/HT211843"
            },
            {
              "name": "https://support.apple.com/kb/HT211952",
              "refsource": "CONFIRM",
              "tags": [
                "Third Party Advisory"
              ],
              "url": "https://support.apple.com/kb/HT211952"
            },
            {
              "name": "20201115 APPLE-SA-2020-11-13-4 Additional information for APPLE-SA-2020-09-16-2 tvOS 14.0",
              "refsource": "FULLDISC",
              "tags": [
                "Mailing List",
                "Third Party Advisory"
              ],
              "url": "http://seclists.org/fulldisclosure/2020/Nov/19"
            },
            {
              "name": "20201115 APPLE-SA-2020-11-13-6 Additional information for APPLE-SA-2020-09-16-4 watchOS 7.0",
              "refsource": "FULLDISC",
              "tags": [
                "Mailing List",
                "Third Party Advisory"
              ],
              "url": "http://seclists.org/fulldisclosure/2020/Nov/22"
            },
            {
              "name": "20201115 APPLE-SA-2020-11-13-3 Additional information for APPLE-SA-2020-09-16-1 iOS 14.0 and iPadOS 14.0",
              "refsource": "FULLDISC",
              "tags": [
                "Mailing List",
                "Third Party Advisory"
              ],
              "url": "http://seclists.org/fulldisclosure/2020/Nov/20"
            },
            {
              "name": "https://support.apple.com/kb/HT211935",
              "refsource": "CONFIRM",
              "tags": [
                "Third Party Advisory"
              ],
              "url": "https://support.apple.com/kb/HT211935"
            },
            {
              "name": "20201215 APPLE-SA-2020-12-14-4 Additional information for APPLE-SA-2020-11-13-1 macOS Big Sur 11.0.1",
              "refsource": "FULLDISC",
              "tags": [
                "Mailing List",
                "Third Party Advisory"
              ],
              "url": "http://seclists.org/fulldisclosure/2020/Dec/32"
            },
            {
              "name": "https://www.oracle.com/security-alerts/cpuApr2021.html",
              "refsource": "MISC",
              "tags": [
                "Patch",
                "Third Party Advisory"
              ],
              "url": "https://www.oracle.com/security-alerts/cpuApr2021.html"
            },
            {
              "name": "https://www.oracle.com/security-alerts/cpuapr2022.html",
              "refsource": "MISC",
              "tags": [
                "Patch",
                "Third Party Advisory"
              ],
              "url": "https://www.oracle.com/security-alerts/cpuapr2022.html"
            }
          ]
        }
      },
      "impact": {
        "baseMetricV2": {
          "acInsufInfo": false,
          "cvssV2": {
            "accessComplexity": "LOW",
            "accessVector": "LOCAL",
            "authentication": "NONE",
            "availabilityImpact": "PARTIAL",
            "baseScore": 2.1,
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "vectorString": "AV:L/AC:L/Au:N/C:N/I:N/A:P",
            "version": "2.0"
          },
          "exploitabilityScore": 3.9,
          "impactScore": 2.9,
          "obtainAllPrivilege": false,
          "obtainOtherPrivilege": false,
          "obtainUserPrivilege": false,
          "severity": "LOW",
          "userInteractionRequired": false
        },
        "baseMetricV3": {
          "cvssV3": {
            "attackComplexity": "LOW",
            "attackVector": "LOCAL",
            "availabilityImpact": "HIGH",
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "LOW",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "exploitabilityScore": 1.8,
          "impactScore": 3.6
        }
      },
      "lastModifiedDate": "2023-01-09T16:41Z",
      "publishedDate": "2020-05-24T22:15Z"
    }
  }
}

{
  "document": {
    "acknowledgments": [
      {
        "organization": "Siemens ProductCERT",
        "summary": "reporting these vulnerabilities to CISA."
      }
    ],
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Disclosure is not limited",
      "tlp": {
        "label": "WHITE",
        "url": "https://us-cert.cisa.gov/tlp/"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the firmware version V3.1 for the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP (incl. SIPLUS variant).\n\nThese GNU/Linux vulnerabilities have been externally identified. Siemens is preparing fix versions and recommends specific countermeasures for products where fixes are not, or not yet available.\n\nNote: This SSA advises vulnerabilities for firmware version V3.1 only; for versions \u003c V3.1 refer to Siemens Security Bulletin SSB-439005 (\nhttps://cert-portal.siemens.com/productcert/html/ssb-439005.html).",
        "title": "Summary"
      },
      {
        "category": "general",
        "text": "As a general security measure, Siemens strongly recommends to protect network access to devices with appropriate mechanisms. In order to operate the devices in a protected IT environment, Siemens recommends to configure the environment according to Siemens\u0027 operational guidelines for Industrial Security (Download: \nhttps://www.siemens.com/cert/operational-guidelines-industrial-security), and to follow the recommendations in the product manuals.\nAdditional information on Industrial Security by Siemens can be found at: https://www.siemens.com/industrialsecurity",
        "title": "General Recommendations"
      },
      {
        "category": "general",
        "text": "For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories",
        "title": "Additional Resources"
      },
      {
        "category": "legal_disclaimer",
        "text": "The use of Siemens Security Advisories is subject to the terms and conditions listed on: https://www.siemens.com/productcert/terms-of-use.",
        "title": "Terms of Use"
      },
      {
        "category": "legal_disclaimer",
        "text": "All information products included in https://us-cert.cisa.gov/ics are provided \"as is\" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see https://us-cert.cisa.gov/tlp/.",
        "title": "Legal Notice"
      },
      {
        "category": "other",
        "text": "This CISA CSAF advisory was converted from Siemens ProductCERT\u0027s CSAF advisory.",
        "title": "Advisory Conversion Disclaimer"
      },
      {
        "category": "other",
        "text": "Multiple",
        "title": "Critical infrastructure sectors"
      },
      {
        "category": "other",
        "text": "Worldwide",
        "title": "Countries/areas deployed"
      },
      {
        "category": "other",
        "text": "Germany",
        "title": "Company headquarters location"
      },
      {
        "category": "general",
        "text": "CISA recommends users take defensive measures to minimize the exploitation risk of this vulnerability.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Minimize network exposure for all control system devices and/or systems, and ensure they are not accessible from the internet.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Locate control system networks and remote devices behind firewalls and isolate them from business networks.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "When remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most recent version available. Also recognize VPN is only as secure as its connected devices.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets. Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.",
        "title": "Recommended Practices"
      }
    ],
    "publisher": {
      "category": "other",
      "contact_details": "central@cisa.dhs.gov",
      "name": "CISA",
      "namespace": "https://www.cisa.gov/"
    },
    "references": [
      {
        "category": "self",
        "summary": "SSA-398330: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP V3.1 - CSAF Version",
        "url": "https://cert-portal.siemens.com/productcert/csaf/ssa-398330.json"
      },
      {
        "category": "self",
        "summary": "SSA-398330: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP V3.1 - HTML Version",
        "url": "https://cert-portal.siemens.com/productcert/html/ssa-398330.html"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-23-348-10 JSON",
        "url": "https://raw.githubusercontent.com/cisagov/CSAF/develop/csaf_files/OT/white/2023/icsa-23-348-10.json"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-23-348-10 - Web Version",
        "url": "https://www.cisa.gov/news-events/ics-advisories/icsa-23-348-10"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/alerts/ICS-ALERT-10-301-01"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/resources-tools/resources/ics-recommended-practices"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/topics/industrial-control-systems"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/sites/default/files/publications/Cybersecurity_Best_Practices_for_Industrial_Control_Systems.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/tips/ICS-TIP-12-146-01B"
      }
    ],
    "title": "Siemens SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP V3.1",
    "tracking": {
      "current_release_date": "2024-11-12T00:00:00.000000Z",
      "generator": {
        "engine": {
          "name": "CISA CSAF Generator",
          "version": "1.0.0"
        }
      },
      "id": "ICSA-23-348-10",
      "initial_release_date": "2023-12-12T00:00:00.000000Z",
      "revision_history": [
        {
          "date": "2023-12-12T00:00:00.000000Z",
          "legacy_version": "1.0",
          "number": "1",
          "summary": "Publication Date"
        },
        {
          "date": "2024-01-09T00:00:00.000000Z",
          "legacy_version": "1.1",
          "number": "2",
          "summary": "Added CVE-2021-44879, CVE-2023-46218, CVE-2023-46219, and CVE-2023-48795"
        },
        {
          "date": "2024-02-13T00:00:00.000000Z",
          "legacy_version": "1.2",
          "number": "3",
          "summary": "Added CVE-2023-45898, CVE-2023-46862, CVE-2023-6121, CVE-2023-6817, CVE-2023-6931, CVE-2023-6932, CVE-2024-0584"
        },
        {
          "date": "2024-03-12T00:00:00.000000Z",
          "legacy_version": "1.3",
          "number": "4",
          "summary": "Added CVE-2023-52425, CVE-2023-52426, CVE-2023-45918"
        },
        {
          "date": "2024-04-09T00:00:00.000000Z",
          "legacy_version": "1.4",
          "number": "5",
          "summary": "Added CVE-2024-28757"
        },
        {
          "date": "2024-05-14T00:00:00.000000Z",
          "legacy_version": "1.5",
          "number": "6",
          "summary": "Added CVE-2024-2004, CVE-2024-2379, CVE-2024-2398, CVE-2024-2466, CVE-2024-2511, CVE-2024-28085, CVE-2024-28182, CVE-2024-28834, CVE-2024-28835"
        },
        {
          "date": "2024-06-11T00:00:00.000000Z",
          "legacy_version": "1.6",
          "number": "7",
          "summary": "Added CVE-2024-2961, CVE-2024-33599, CVE-2024-33600, CVE-2024-33601, CVE-2024-33602, CVE-2024-34459"
        },
        {
          "date": "2024-07-09T00:00:00.000000Z",
          "legacy_version": "1.7",
          "number": "8",
          "summary": "Added CVE-2024-5535, CVE-2024-5742"
        },
        {
          "date": "2024-08-13T00:00:00.000000Z",
          "legacy_version": "1.8",
          "number": "9",
          "summary": "Added CVE-2017-15422, CVE-2024-7264, CVE-2024-37370, CVE-2024-37371"
        },
        {
          "date": "2024-10-08T00:00:00.000000Z",
          "legacy_version": "1.9",
          "number": "10",
          "summary": "Added CVE-2024-6409, CVE-2024-8096, CVE-2024-45490, CVE-2024-45491, CVE-2024-45492"
        },
        {
          "date": "2024-11-12T00:00:00.000000Z",
          "legacy_version": "2.0",
          "number": "11",
          "summary": "Added CVE-2024-2236, CVE-2024-9143"
        }
      ],
      "status": "final",
      "version": "11"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "vers:all/\u003e=V3.1.0",
                "product": {
                  "name": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)",
                  "product_id": "CSAFPID-0001",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6ES7518-4AX00-1AB0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "vers:all/\u003e=V3.1.0",
                "product": {
                  "name": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)",
                  "product_id": "CSAFPID-0002",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6ES7518-4AX00-1AC0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "vers:all/\u003e=V3.1.0",
                "product": {
                  "name": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)",
                  "product_id": "CSAFPID-0003",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6ES7518-4FX00-1AB0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "vers:all/\u003e=V3.1.0",
                "product": {
                  "name": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)",
                  "product_id": "CSAFPID-0004",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6ES7518-4FX00-1AC0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "vers:all/\u003e=V3.1.0",
                "product": {
                  "name": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)",
                  "product_id": "CSAFPID-0005",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6AG1518-4AX00-4AC0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)"
          }
        ],
        "category": "vendor",
        "name": "Siemens"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2013-0340",
      "cwe": {
        "id": "CWE-611",
        "name": "Improper Restriction of XML External Entity Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "expat 2.1.0 and earlier does not properly handle entities expansion unless an application developer uses the XML_SetEntityDeclHandler function, which allows remote attackers to cause a denial of service (resource consumption), send HTTP requests to intranet servers, or read arbitrary files via a crafted XML document, aka an XML External Entity (XXE) issue.  NOTE: it could be argued that because expat already provides the ability to disable external entity expansion, the responsibility for resolving this issue lies with application developers; according to this argument, this entry should be REJECTed, and each affected application would need its own CVE.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2013-0340"
    },
    {
      "cve": "CVE-2013-4235",
      "cwe": {
        "id": "CWE-367",
        "name": "Time-of-check Time-of-use (TOCTOU) Race Condition"
      },
      "notes": [
        {
          "category": "summary",
          "text": "shadow: TOCTOU (time-of-check time-of-use) race condition when copying and removing directory trees",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2013-4235"
    },
    {
      "cve": "CVE-2014-7209",
      "cwe": {
        "id": "CWE-77",
        "name": "Improper Neutralization of Special Elements used in a Command (\u0027Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "run-mailcap in the Debian mime-support package before 3.52-1+deb7u1 allows context-dependent attackers to execute arbitrary commands via shell metacharacters in a filename.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.0,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:R/S:C/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2014-7209"
    },
    {
      "cve": "CVE-2015-20107",
      "cwe": {
        "id": "CWE-77",
        "name": "Improper Neutralization of Special Elements used in a Command (\u0027Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Python (aka CPython) up to 3.10.8, the mailcap module does not add escape characters into commands discovered in the system mailcap file. This may allow attackers to inject shell commands into applications that call mailcap.findmatch with untrusted input (if they lack validation of user-provided filenames or arguments). The fix is also back-ported to 3.7, 3.8, 3.9",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.6,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:H/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2015-20107"
    },
    {
      "cve": "CVE-2016-3189",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Use-after-free vulnerability in bzip2recover in bzip2 1.0.6 allows remote attackers to cause a denial of service (crash) via a crafted bzip2 file, related to block ends set to before the start of the block.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2016-3189"
    },
    {
      "cve": "CVE-2016-3709",
      "cwe": {
        "id": "CWE-79",
        "name": "Improper Neutralization of Input During Web Page Generation (\u0027Cross-site Scripting\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Possible cross-site scripting vulnerability in libxml after commit 960f0e2.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2016-3709"
    },
    {
      "cve": "CVE-2016-4658",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "xpointer.c in libxml2 before 2.9.5 (as used in Apple iOS before 10, OS X before 10.12, tvOS before 10, and watchOS before 3, and other products) does not forbid namespace nodes in XPointer ranges, which allows remote attackers to execute arbitrary code or cause a denial of service (use-after-free and memory corruption) via a crafted XML document.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2016-4658"
    },
    {
      "cve": "CVE-2016-5131",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Use-after-free vulnerability in libxml2 through 2.9.4, as used in Google Chrome before 52.0.2743.82, allows remote attackers to cause a denial of service or possibly have unspecified other impact via vectors related to the XPointer range-to function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2016-5131"
    },
    {
      "cve": "CVE-2016-9318",
      "cwe": {
        "id": "CWE-611",
        "name": "Improper Restriction of XML External Entity Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libxml2 2.9.4 and earlier, as used in XMLSec 1.2.23 and earlier and other products, does not offer a flag directly indicating that the current document may be read but other files may not be opened, which makes it easier for remote attackers to conduct XML External Entity (XXE) attacks via a crafted document.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2016-9318"
    },
    {
      "cve": "CVE-2016-10228",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The iconv program in the GNU C Library (aka glibc or libc6) 2.31 and earlier, when invoked with multiple suffixes in the destination encoding (TRANSLATE or IGNORE) along with the -c option, enters an infinite loop when processing invalid multi-byte input sequences, leading to a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2016-10228"
    },
    {
      "cve": "CVE-2016-10739",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the GNU C Library (aka glibc or libc6) through 2.28, the getaddrinfo function would successfully parse a string that contained an IPv4 address followed by whitespace and arbitrary characters, which could lead applications to incorrectly assume that it had parsed a valid string, without the possibility of embedded HTTP headers or other potentially dangerous substrings.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2016-10739"
    },
    {
      "cve": "CVE-2017-0663",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A remote code execution vulnerability in libxml2 could enable an attacker using a specially crafted file to execute arbitrary code within the context of an unprivileged process. This issue is rated as High due to the possibility of remote code execution in an application that uses this library. Product: Android. Versions: 4.4.4, 5.0.2, 5.1.1, 6.0, 6.0.1, 7.0, 7.1.1, 7.1.2. Android ID: A-37104170.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2017-0663"
    },
    {
      "cve": "CVE-2017-7375",
      "cwe": {
        "id": "CWE-611",
        "name": "Improper Restriction of XML External Entity Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw in libxml2 allows remote XML entity inclusion with default parser flags (i.e., when the caller did not request entity substitution, DTD validation, external DTD subset loading, or default DTD attributes). Depending on the context, this may expose a higher-risk attack surface in libxml2 not usually reachable with default parser flags, and expose content from local files, HTTP, or FTP servers (which might be otherwise unreachable).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2017-7375"
    },
    {
      "cve": "CVE-2017-7376",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer overflow in libxml2 allows remote attackers to execute arbitrary code by leveraging an incorrect limit for port values when handling redirects.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2017-7376"
    },
    {
      "cve": "CVE-2017-9047",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A buffer overflow was discovered in libxml2 20904-GITv2.9.4-16-g0741801. The function xmlSnprintfElementContent in valid.c is supposed to recursively dump the element content definition into a char buffer \u0027buf\u0027 of size \u0027size\u0027. The variable len is assigned strlen(buf). If the content-\u003etype is XML_ELEMENT_CONTENT_ELEMENT, then (i) the content-\u003eprefix is appended to buf (if it actually fits) whereupon (ii) content-\u003ename is written to the buffer. However, the check for whether the content-\u003ename actually fits also uses \u0027len\u0027 rather than the updated buffer length strlen(buf). This allows us to write about \"size\" many bytes beyond the allocated memory. This vulnerability causes programs that use libxml2, such as PHP, to crash.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2017-9047"
    },
    {
      "cve": "CVE-2017-9048",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libxml2 20904-GITv2.9.4-16-g0741801 is vulnerable to a stack-based buffer overflow. The function xmlSnprintfElementContent in valid.c is supposed to recursively dump the element content definition into a char buffer \u0027buf\u0027 of size \u0027size\u0027. At the end of the routine, the function may strcat two more characters without checking whether the current strlen(buf) + 2 \u003c size. This vulnerability causes programs that use libxml2, such as PHP, to crash.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2017-9048"
    },
    {
      "cve": "CVE-2017-9049",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libxml2 20904-GITv2.9.4-16-g0741801 is vulnerable to a heap-based buffer over-read in the xmlDictComputeFastKey function in dict.c. This vulnerability causes programs that use libxml2, such as PHP, to crash. This vulnerability exists because of an incomplete fix for libxml2 Bug 759398.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2017-9049"
    },
    {
      "cve": "CVE-2017-9050",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libxml2 20904-GITv2.9.4-16-g0741801 is vulnerable to a heap-based buffer over-read in the xmlDictAddString function in dict.c. This vulnerability causes programs that use libxml2, such as PHP, to crash. This vulnerability exists because of an incomplete fix for CVE-2016-1839.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2017-9050"
    },
    {
      "cve": "CVE-2017-15422",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Integer overflow in international date handling in International Components for Unicode (ICU) for C/C++ before 60.1, as used in V8 in Google Chrome prior to 63.0.3239.84 and other products, allowed a remote attacker to perform an out of bounds memory read via a crafted HTML page.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2017-15422"
    },
    {
      "cve": "CVE-2017-16931",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "parser.c in libxml2 before 2.9.5 mishandles parameter-entity references because the NEXTL macro calls the xmlParserHandlePEReference function in the case of a \u0027%\u0027 character in a DTD name.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2017-16931"
    },
    {
      "cve": "CVE-2017-16932",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "parser.c in libxml2 before 2.9.5 does not prevent infinite recursion in parameter entities.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2017-16932"
    },
    {
      "cve": "CVE-2017-17512",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "sensible-browser in sensible-utils before 0.0.11 does not validate strings before launching the program specified by the BROWSER environment variable, which allows remote attackers to conduct argument-injection attacks via a crafted URL, as demonstrated by a --proxy-pac-file argument.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2017-17512"
    },
    {
      "cve": "CVE-2017-18258",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The xz_head function in xzlib.c in libxml2 before 2.9.6 allows remote attackers to cause a denial of service (memory consumption) via a crafted LZMA file, because the decoder functionality does not restrict memory usage to what is required for a legitimate file.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2017-18258"
    },
    {
      "cve": "CVE-2018-0495",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Libgcrypt before 1.7.10 and 1.8.x before 1.8.3 allows a memory-cache side-channel attack on ECDSA signatures that can be mitigated through the use of blinding during the signing process in the _gcry_ecc_ecdsa_sign function in cipher/ecc-ecdsa.c, aka the Return Of the Hidden Number Problem or ROHNP. To discover an ECDSA key, the attacker needs access to either the local machine or a different virtual machine on the same physical host.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2018-0495"
    },
    {
      "cve": "CVE-2018-12886",
      "cwe": {
        "id": "CWE-209",
        "name": "Generation of Error Message Containing Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "stack_protect_prologue in cfgexpand.c and stack_protect_epilogue in function.c in GNU Compiler Collection (GCC) 4.1 through 8 (under certain circumstances) generate instruction sequences when targeting ARM targets that spill the address of the stack protector guard, which allows an attacker to bypass the protection of -fstack-protector, -fstack-protector-all, -fstack-protector-strong, and -fstack-protector-explicit against stack overflow by controlling what the stack canary is compared against.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2018-12886"
    },
    {
      "cve": "CVE-2018-14404",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer dereference vulnerability exists in the xpath.c:xmlXPathCompOpEval() function of libxml2 through 2.9.8 when parsing an invalid XPath expression in the XPATH_OP_AND or XPATH_OP_OR case. Applications processing untrusted XSL format inputs with the use of the libxml2 library may be vulnerable to a denial of service attack due to a crash of the application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2018-14404"
    },
    {
      "cve": "CVE-2018-14567",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libxml2 2.9.8, if --with-lzma is used, allows remote attackers to cause a denial of service (infinite loop) via a crafted XML file that triggers LZMA_MEMLIMIT_ERROR, as demonstrated by xmllint, a different vulnerability than CVE-2015-8035 and CVE-2018-9251.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2018-14567"
    },
    {
      "cve": "CVE-2018-18928",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "International Components for Unicode (ICU) for C/C++ 63.1 has an integer overflow in number::impl::DecimalQuantity::toScientificString() in i18n/number_decimalquantity.cpp.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2018-18928"
    },
    {
      "cve": "CVE-2018-19591",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the GNU C Library (aka glibc or libc6) through 2.28, attempting to resolve a crafted hostname via getaddrinfo() leads to the allocation of a socket descriptor that is not closed. This is related to the if_nametoindex() function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2018-19591"
    },
    {
      "cve": "CVE-2018-20482",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU Tar through 1.30, when --sparse is used, mishandles file shrinkage during read access, which allows local users to cause a denial of service (infinite read loop in sparse_dump_region in sparse.c) by modifying a file that is supposed to be archived by a different user\u0027s process (e.g., a system backup running as root).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2018-20482"
    },
    {
      "cve": "CVE-2018-20843",
      "cwe": {
        "id": "CWE-611",
        "name": "Improper Restriction of XML External Entity Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libexpat in Expat before 2.2.7, XML input including XML names that contain a large number of colons could make the XML parser consume a high amount of RAM and CPU resources while processing (enough to be usable for denial-of-service attacks).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2018-20843"
    },
    {
      "cve": "CVE-2018-25032",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "zlib before 1.2.12 allows memory corruption when deflating (i.e., when compressing) if the input has many distant matches.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2018-25032"
    },
    {
      "cve": "CVE-2019-3855",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer overflow flaw which could lead to an out of bounds write was discovered in libssh2 before 1.8.1 in the way packets are read from the server. A remote attacker who compromises a SSH server may be able to execute code on the client system when a user connects to the server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-3855"
    },
    {
      "cve": "CVE-2019-3856",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer overflow flaw, which could lead to an out of bounds write, was discovered in libssh2 before 1.8.1 in the way keyboard prompt requests are parsed. A remote attacker who compromises a SSH server may be able to execute code on the client system when a user connects to the server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-3856"
    },
    {
      "cve": "CVE-2019-3857",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer overflow flaw which could lead to an out of bounds write was discovered in libssh2 before 1.8.1 in the way SSH_MSG_CHANNEL_REQUEST packets with an exit signal are parsed. A remote attacker who compromises a SSH server may be able to execute code on the client system when a user connects to the server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-3857"
    },
    {
      "cve": "CVE-2019-3858",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out of bounds read flaw was discovered in libssh2 before 1.8.1 when a specially crafted SFTP packet is received from the server. A remote attacker who compromises a SSH server may be able to cause a Denial of Service or read data in the client memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-3858"
    },
    {
      "cve": "CVE-2019-3859",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out of bounds read flaw was discovered in libssh2 before 1.8.1 in the _libssh2_packet_require and _libssh2_packet_requirev functions. A remote attacker who compromises a SSH server may be able to cause a Denial of Service or read data in the client memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-3859"
    },
    {
      "cve": "CVE-2019-3860",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out of bounds read flaw was discovered in libssh2 before 1.8.1 in the way SFTP packets with empty payloads are parsed. A remote attacker who compromises a SSH server may be able to cause a Denial of Service or read data in the client memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-3860"
    },
    {
      "cve": "CVE-2019-3861",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out of bounds read flaw was discovered in libssh2 before 1.8.1 in the way SSH packets with a padding length value greater than the packet length are parsed. A remote attacker who compromises a SSH server may be able to cause a Denial of Service or read data in the client memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-3861"
    },
    {
      "cve": "CVE-2019-3862",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out of bounds read flaw was discovered in libssh2 before 1.8.1 in the way SSH_MSG_CHANNEL_REQUEST packets with an exit status message and no payload are parsed. A remote attacker who compromises a SSH server may be able to cause a Denial of Service or read data in the client memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-3862"
    },
    {
      "cve": "CVE-2019-3863",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in libssh2 before 1.8.1. A server could send a multiple keyboard interactive response messages whose total length are greater than unsigned char max characters. This value is used as an index to copy memory causing in an out of bounds memory write error.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-3863"
    },
    {
      "cve": "CVE-2019-5018",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An exploitable use after free vulnerability exists in the window function functionality of Sqlite3 3.26.0. A specially crafted SQL command can cause a use after free vulnerability, potentially resulting in remote code execution. An attacker can send a malicious SQL command to trigger this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-5018"
    },
    {
      "cve": "CVE-2019-5094",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An exploitable code execution vulnerability exists in the quota file functionality of E2fsprogs 1.45.3. A specially crafted ext4 partition can cause an out-of-bounds write on the heap, resulting in code execution. An attacker can corrupt a partition to trigger this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-5094"
    },
    {
      "cve": "CVE-2019-5188",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A code execution vulnerability exists in the directory rehashing functionality of E2fsprogs e2fsck 1.45.4. A specially crafted ext4 directory can cause an out-of-bounds write on the stack, resulting in code execution. An attacker can corrupt a partition to trigger this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-5188"
    },
    {
      "cve": "CVE-2019-5435",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer overflow in curl\u0027s URL API results in a buffer overflow in libcurl 7.62.0 to and including 7.64.1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-5435"
    },
    {
      "cve": "CVE-2019-5436",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A heap buffer overflow in the TFTP receiving code allows for DoS or arbitrary code execution in libcurl versions 7.19.4 through 7.64.1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-5436"
    },
    {
      "cve": "CVE-2019-5443",
      "cwe": {
        "id": "CWE-427",
        "name": "Uncontrolled Search Path Element"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A non-privileged user or program can put code and a config file in a known non-privileged path (under C:/usr/local/) that will make curl \u003c= 7.65.1 automatically run the code (as an openssl \"engine\") on invocation. If that curl is invoked by a privileged user it can do anything it wants.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-5443"
    },
    {
      "cve": "CVE-2019-5481",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Double-free vulnerability in the FTP-kerberos code in cURL 7.52.0 to 7.65.3.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-5481"
    },
    {
      "cve": "CVE-2019-5482",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Heap buffer overflow in the TFTP protocol handler in cURL 7.19.4 to 7.65.3.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-5482"
    },
    {
      "cve": "CVE-2019-6109",
      "cwe": {
        "id": "CWE-116",
        "name": "Improper Encoding or Escaping of Output"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in OpenSSH 7.9. Due to missing character encoding in the progress display, a malicious server (or Man-in-The-Middle attacker) can employ crafted object names to manipulate the client output, e.g., by using ANSI control codes to hide additional files being transferred. This affects refresh_progress_meter() in progressmeter.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.8,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-6109"
    },
    {
      "cve": "CVE-2019-6110",
      "cwe": {
        "id": "CWE-838",
        "name": "Inappropriate Encoding for Output Context"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In OpenSSH 7.9, due to accepting and displaying arbitrary stderr output from the server, a malicious server (or Man-in-The-Middle attacker) can manipulate the client output, for example to use ANSI control codes to hide additional files being transferred.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.8,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-6110"
    },
    {
      "cve": "CVE-2019-6111",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in OpenSSH 7.9. Due to the scp implementation being derived from 1983 rcp, the server chooses which files/directories are sent to the client. However, the scp client only performs cursory validation of the object name returned (only directory traversal attacks are prevented). A malicious scp server (or Man-in-The-Middle attacker) can overwrite arbitrary files in the scp client target directory. If recursive operation (-r) is performed, the server can manipulate subdirectories as well (for example, to overwrite the .ssh/authorized_keys file).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-6111"
    },
    {
      "cve": "CVE-2019-6488",
      "cwe": {
        "id": "CWE-404",
        "name": "Improper Resource Shutdown or Release"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The string component in the GNU C Library (aka glibc or libc6) through 2.28, when running on the x32 architecture, incorrectly attempts to use a 64-bit register for size_t in assembly codes, which can lead to a segmentation fault or possibly unspecified other impact, as demonstrated by a crash in __memmove_avx_unaligned_erms in sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S during a memcpy.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-6488"
    },
    {
      "cve": "CVE-2019-7309",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the GNU C Library (aka glibc or libc6) through 2.29, the memcmp function for the x32 architecture can incorrectly return zero (indicating that the inputs are equal) because the RDX most significant bit is mishandled.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-7309"
    },
    {
      "cve": "CVE-2019-8457",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite3 from 3.6.0 to and including 3.27.2 is vulnerable to heap out-of-bound read in the rtreenode() function when handling invalid rtree tables.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-8457"
    },
    {
      "cve": "CVE-2019-9169",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the GNU C Library (aka glibc or libc6) through 2.29, proceed_next_node in posix/regexec.c has a heap-based buffer over-read via an attempted case-insensitive regular-expression match.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-9169"
    },
    {
      "cve": "CVE-2019-9636",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Python 2.7.x through 2.7.16 and 3.x through 3.7.2 is affected by: Improper Handling of Unicode Encoding (with an incorrect netloc) during NFKC normalization. The impact is: Information disclosure (credentials, cookies, etc. that are cached against a given hostname). The components are: urllib.parse.urlsplit, urllib.parse.urlparse. The attack vector is: A specially crafted URL could be incorrectly parsed to locate cookies or authentication data and send that information to a different host than when parsed correctly. This is fixed in: v2.7.17, v2.7.17rc1, v2.7.18, v2.7.18rc1; v3.5.10, v3.5.10rc1, v3.5.7, v3.5.8, v3.5.8rc1, v3.5.8rc2, v3.5.9; v3.6.10, v3.6.10rc1, v3.6.11, v3.6.11rc1, v3.6.12, v3.6.9, v3.6.9rc1; v3.7.3, v3.7.3rc1, v3.7.4, v3.7.4rc1, v3.7.4rc2, v3.7.5, v3.7.5rc1, v3.7.6, v3.7.6rc1, v3.7.7, v3.7.7rc1, v3.7.8, v3.7.8rc1, v3.7.9.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-9636"
    },
    {
      "cve": "CVE-2019-9674",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Lib/zipfile.py in Python through 3.7.2 allows remote attackers to cause a denial of service (resource consumption) via a ZIP bomb.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-9674"
    },
    {
      "cve": "CVE-2019-9740",
      "cwe": {
        "id": "CWE-93",
        "name": "Improper Neutralization of CRLF Sequences (\u0027CRLF Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in urllib2 in Python 2.x through 2.7.16 and urllib in Python 3.x through 3.7.3. CRLF injection is possible if the attacker controls a url parameter, as demonstrated by the first argument to urllib.request.urlopen with \\r\\n (specifically in the query string after a ? character) followed by an HTTP header or a Redis command. This is fixed in: v2.7.17, v2.7.17rc1, v2.7.18, v2.7.18rc1; v3.5.10, v3.5.10rc1, v3.5.8, v3.5.8rc1, v3.5.8rc2, v3.5.9; v3.6.10, v3.6.10rc1, v3.6.11, v3.6.11rc1, v3.6.12, v3.6.9, v3.6.9rc1; v3.7.4, v3.7.4rc1, v3.7.4rc2, v3.7.5, v3.7.5rc1, v3.7.6, v3.7.6rc1, v3.7.7, v3.7.7rc1, v3.7.8, v3.7.8rc1, v3.7.9.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-9740"
    },
    {
      "cve": "CVE-2019-9923",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "pax_decode_header in sparse.c in GNU Tar before 1.32 had a NULL pointer dereference when parsing certain archives that have malformed extended headers.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-9923"
    },
    {
      "cve": "CVE-2019-9936",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite 3.27.2, running fts5 prefix queries inside a transaction could trigger a heap-based buffer over-read in fts5HashEntrySort in sqlite3.c, which may lead to an information leak. This is related to ext/fts5/fts5_hash.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-9936"
    },
    {
      "cve": "CVE-2019-9937",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite 3.27.2, interleaving reads and writes in a single transaction with an fts5 virtual table will lead to a NULL Pointer Dereference in fts5ChunkIterate in sqlite3.c. This is related to ext/fts5/fts5_hash.c and ext/fts5/fts5_index.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-9937"
    },
    {
      "cve": "CVE-2019-9947",
      "cwe": {
        "id": "CWE-93",
        "name": "Improper Neutralization of CRLF Sequences (\u0027CRLF Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in urllib2 in Python 2.x through 2.7.16 and urllib in Python 3.x through 3.7.3. CRLF injection is possible if the attacker controls a url parameter, as demonstrated by the first argument to urllib.request.urlopen with \\r\\n (specifically in the path component of a URL that lacks a ? character) followed by an HTTP header or a Redis command. This is similar to the CVE-2019-9740 query string issue. This is fixed in: v2.7.17, v2.7.17rc1, v2.7.18, v2.7.18rc1; v3.5.10, v3.5.10rc1, v3.5.8, v3.5.8rc1, v3.5.8rc2, v3.5.9; v3.6.10, v3.6.10rc1, v3.6.11, v3.6.11rc1, v3.6.12, v3.6.9, v3.6.9rc1; v3.7.4, v3.7.4rc1, v3.7.4rc2, v3.7.5, v3.7.5rc1, v3.7.6, v3.7.6rc1, v3.7.7, v3.7.7rc1, v3.7.8, v3.7.8rc1, v3.7.9.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-9947"
    },
    {
      "cve": "CVE-2019-9948",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "urllib in Python 2.x through 2.7.16 supports the local_file: scheme, which makes it easier for remote attackers to bypass protection mechanisms that blacklist file: URIs, as demonstrated by triggering a urllib.urlopen(\u0027local_file:///etc/passwd\u0027) call.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-9948"
    },
    {
      "cve": "CVE-2019-10160",
      "cwe": {
        "id": "CWE-172",
        "name": "Encoding Error"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A security regression of CVE-2019-9636 was discovered in python since commit d537ab0ff9767ef024f26246899728f0116b1ec3 affecting versions 2.7, 3.5, 3.6, 3.7 and from v3.8.0a4 through v3.8.0b1, which still allows an attacker to exploit CVE-2019-9636 by abusing the user and password parts of a URL. When an application parses user-supplied URLs to store cookies, authentication credentials, or other kind of information, it is possible for an attacker to provide specially crafted URLs to make the application locate host-related information (e.g. cookies, authentication data) and send them to a different host than where it should, unlike if the URLs had been correctly parsed. The result of an attack may vary based on the application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-10160"
    },
    {
      "cve": "CVE-2019-11360",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A buffer overflow in iptables-restore in netfilter iptables 1.8.2 allows an attacker to (at least) crash the program or potentially gain code execution via a specially crafted iptables-save file. This is related to add_param_to_argv in xshared.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.2,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-11360"
    },
    {
      "cve": "CVE-2019-12290",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU libidn2 before 2.2.0 fails to perform the roundtrip checks specified in RFC3490 Section 4.2 when converting A-labels to U-labels. This makes it possible in some circumstances for one domain to impersonate another. By creating a malicious domain that matches a target domain except for the inclusion of certain punycoded Unicode characters (that would be discarded when converted first to a Unicode label and then back to an ASCII label), arbitrary domains can be impersonated.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-12290"
    },
    {
      "cve": "CVE-2019-12900",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "BZ2_decompress in decompress.c in bzip2 through 1.0.6 has an out-of-bounds write when there are many selectors.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-12900"
    },
    {
      "cve": "CVE-2019-12904",
      "cwe": {
        "id": "CWE-668",
        "name": "Exposure of Resource to Wrong Sphere"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Libgcrypt 1.8.4, the C implementation of AES is vulnerable to a flush-and-reload side-channel attack because physical addresses are available to other processes. (The C implementation is used on platforms where an assembly-language implementation is unavailable.) NOTE: the vendor\u0027s position is that the issue report cannot be validated because there is no description of an attack",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-12904"
    },
    {
      "cve": "CVE-2019-13057",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the server in OpenLDAP before 2.4.48. When the server administrator delegates rootDN (database admin) privileges for certain databases but wants to maintain isolation (e.g., for multi-tenant deployments), slapd does not properly stop a rootDN from requesting authorization as an identity from another database during a SASL bind or with a proxyAuthz (RFC 4370) control. (It is not a common configuration to deploy a system where the server administrator and a DB administrator enjoy different levels of trust.)",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-13057"
    },
    {
      "cve": "CVE-2019-13565",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in OpenLDAP 2.x before 2.4.48. When using SASL authentication and session encryption, and relying on the SASL security layers in slapd access controls, it is possible to obtain access that would otherwise be denied via a simple bind for any identity covered in those ACLs. After the first SASL bind is completed, the sasl_ssf value is retained for all new non-SASL connections. Depending on the ACL configuration, this can affect different types of operations (searches, modifications, etc.). In other words, a successful authorization step completed by one user affects the authorization requirement for a different user.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-13565"
    },
    {
      "cve": "CVE-2019-13627",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "It was discovered that there was a ECDSA timing attack in the libgcrypt20 cryptographic library. Version affected: 1.8.4-5, 1.7.6-2+deb9u3, and 1.6.3-2+deb8u4. Versions fixed: 1.8.5-2 and 1.6.3-2+deb8u7.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:N/UI:R/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-13627"
    },
    {
      "cve": "CVE-2019-15847",
      "cwe": {
        "id": "CWE-331",
        "name": "Insufficient Entropy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The POWER9 backend in GNU Compiler Collection (GCC) before version 10 could optimize multiple calls of the __builtin_darn intrinsic into a single call, thus reducing the entropy of the random number generator. This occurred because a volatile operation was not specified. For example, within a single execution of a program, the output of every __builtin_darn() call may be the same.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-15847"
    },
    {
      "cve": "CVE-2019-15903",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libexpat before 2.2.8, crafted XML input could fool the parser into changing from DTD parsing to document parsing too early; a consecutive call to XML_GetCurrentLineNumber (or XML_GetCurrentColumnNumber) then resulted in a heap-based buffer over-read.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-15903"
    },
    {
      "cve": "CVE-2019-16056",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in Python through 2.7.16, 3.x through 3.5.7, 3.6.x through 3.6.9, and 3.7.x through 3.7.4. The email module wrongly parses email addresses that contain multiple @ characters. An application that uses the email module and implements some kind of checks on the From/To headers of a message could be tricked into accepting an email address that should be denied. An attack may be the same as in CVE-2019-11340; however, this CVE applies to Python more generally.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-16056"
    },
    {
      "cve": "CVE-2019-16168",
      "cwe": {
        "id": "CWE-369",
        "name": "Divide By Zero"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite through 3.29.0, whereLoopAddBtreeIndex in sqlite3.c can crash a browser or other application because of missing validation of a sqlite_stat1 sz field, aka a \"severe division by zero in the query planner.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-16168"
    },
    {
      "cve": "CVE-2019-16905",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "OpenSSH 7.7 through 7.9 and 8.x before 8.1, when compiled with an experimental key type, has a pre-authentication integer overflow if a client or server is configured to use a crafted XMSS key. This leads to memory corruption and local code execution because of an error in the XMSS key parsing algorithm. NOTE: the XMSS implementation is considered experimental in all released OpenSSH versions, and there is no supported way to enable it when building portable OpenSSH.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-16905"
    },
    {
      "cve": "CVE-2019-17498",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libssh2 v1.9.0 and earlier versions, the SSH_MSG_DISCONNECT logic in packet.c has an integer overflow in a bounds check, enabling an attacker to specify an arbitrary (out-of-bounds) offset for a subsequent memory read. A crafted SSH server may be able to disclose sensitive information or cause a denial of service condition on the client system when a user connects to the server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-17498"
    },
    {
      "cve": "CVE-2019-17543",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "LZ4 before 1.9.2 has a heap-based buffer overflow in LZ4_write32 (related to LZ4_compress_destSize), affecting applications that call LZ4_compress_fast with a large input. (This issue can also lead to data corruption.) NOTE: the vendor states \"only a few specific / uncommon usages of the API are at risk.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-17543"
    },
    {
      "cve": "CVE-2019-17594",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a heap-based buffer over-read in the _nc_find_entry function in tinfo/comp_hash.c in the terminfo library in ncurses before 6.1-20191012.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-17594"
    },
    {
      "cve": "CVE-2019-17595",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a heap-based buffer over-read in the fmt_entry function in tinfo/comp_hash.c in the terminfo library in ncurses before 6.1-20191012.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:L/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-17595"
    },
    {
      "cve": "CVE-2019-18224",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "idn2_to_ascii_4i in lib/lookup.c in GNU libidn2 before 2.1.1 has a heap-based buffer overflow via a long domain string.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-18224"
    },
    {
      "cve": "CVE-2019-18276",
      "cwe": {
        "id": "CWE-273",
        "name": "Improper Check for Dropped Privileges"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in disable_priv_mode in shell.c in GNU Bash through 5.0 patch 11. By default, if Bash is run with its effective UID not equal to its real UID, it will drop privileges by setting its effective UID to its real UID. However, it does so incorrectly. On Linux and other systems that support \"saved UID\" functionality, the saved UID is not dropped. An attacker with command execution in the shell can use \"enable -f\" for runtime loading of a new builtin, which can be a shared object that calls setuid() and therefore regains privileges. However, binaries running with an effective UID of 0 are unaffected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-18276"
    },
    {
      "cve": "CVE-2019-18348",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in urllib2 in Python 2.x through 2.7.17 and urllib in Python 3.x through 3.8.0. CRLF injection is possible if the attacker controls a url parameter, as demonstrated by the first argument to urllib.request.urlopen with \\r\\n (specifically in the host component of a URL) followed by an HTTP header. This is similar to the CVE-2019-9740 query string issue and the CVE-2019-9947 path string issue. (This is not exploitable when glibc has CVE-2016-10739 fixed.). This is fixed in: v2.7.18, v2.7.18rc1; v3.5.10, v3.5.10rc1; v3.6.11, v3.6.11rc1, v3.6.12; v3.7.8, v3.7.8rc1, v3.7.9; v3.8.3, v3.8.3rc1, v3.8.4, v3.8.4rc1, v3.8.5, v3.8.6, v3.8.6rc1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-18348"
    },
    {
      "cve": "CVE-2019-19126",
      "cwe": {
        "id": "CWE-665",
        "name": "Improper Initialization"
      },
      "notes": [
        {
          "category": "summary",
          "text": "On the x86-64 architecture, the GNU C Library (aka glibc) before 2.31 fails to ignore the LD_PREFER_MAP_32BIT_EXEC environment variable during program execution after a security transition, allowing local attackers to restrict the possible mapping addresses for loaded libraries and thus bypass ASLR for a setuid program.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19126"
    },
    {
      "cve": "CVE-2019-19242",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite 3.30.1 mishandles pExpr-\u003ey.pTab, as demonstrated by the TK_COLUMN case in sqlite3ExprCodeTarget in expr.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19242"
    },
    {
      "cve": "CVE-2019-19244",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Select in select.c in SQLite 3.30.1 allows a crash if a sub-select uses both DISTINCT and window functions, and also has certain ORDER BY usage.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19244"
    },
    {
      "cve": "CVE-2019-19317",
      "cwe": {
        "id": "CWE-681",
        "name": "Incorrect Conversion between Numeric Types"
      },
      "notes": [
        {
          "category": "summary",
          "text": "lookupName in resolve.c in SQLite 3.30.1 omits bits from the colUsed bitmask in the case of a generated column, which allows attackers to cause a denial of service or possibly have unspecified other impact.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19317"
    },
    {
      "cve": "CVE-2019-19603",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite 3.30.1 mishandles certain SELECT statements with a nonexistent VIEW, leading to an application crash.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19603"
    },
    {
      "cve": "CVE-2019-19645",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "alter.c in SQLite through 3.30.1 allows attackers to trigger infinite recursion via certain types of self-referential views in conjunction with ALTER TABLE statements.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19645"
    },
    {
      "cve": "CVE-2019-19646",
      "cwe": {
        "id": "CWE-754",
        "name": "Improper Check for Unusual or Exceptional Conditions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "pragma.c in SQLite through 3.30.1 mishandles NOT NULL in an integrity_check PRAGMA command in certain cases of generated columns.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19646"
    },
    {
      "cve": "CVE-2019-19880",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "exprListAppendList in window.c in SQLite 3.30.1 allows attackers to trigger an invalid pointer dereference because constant integer values in ORDER BY clauses of window definitions are mishandled.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19880"
    },
    {
      "cve": "CVE-2019-19906",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "cyrus-sasl (aka Cyrus SASL) 2.1.27 has an out-of-bounds write leading to unauthenticated remote denial-of-service in OpenLDAP via a malformed LDAP packet. The OpenLDAP crash is ultimately caused by an off-by-one error in _sasl_add_string in common.c in cyrus-sasl.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19906"
    },
    {
      "cve": "CVE-2019-19923",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "flattenSubquery in select.c in SQLite 3.30.1 mishandles certain uses of SELECT DISTINCT involving a LEFT JOIN in which the right-hand side is a view. This can cause a NULL pointer dereference (or incorrect results).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19923"
    },
    {
      "cve": "CVE-2019-19924",
      "cwe": {
        "id": "CWE-755",
        "name": "Improper Handling of Exceptional Conditions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite 3.30.1 mishandles certain parser-tree rewriting, related to expr.c, vdbeaux.c, and window.c. This is caused by incorrect sqlite3WindowRewrite() error handling.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19924"
    },
    {
      "cve": "CVE-2019-19925",
      "cwe": {
        "id": "CWE-434",
        "name": "Unrestricted Upload of File with Dangerous Type"
      },
      "notes": [
        {
          "category": "summary",
          "text": "zipfileUpdate in ext/misc/zipfile.c in SQLite 3.30.1 mishandles a NULL pathname during an update of a ZIP archive.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19925"
    },
    {
      "cve": "CVE-2019-19926",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "multiSelect in select.c in SQLite 3.30.1 mishandles certain errors during parsing, as demonstrated by errors from sqlite3WindowRewrite() calls. NOTE: this vulnerability exists because of an incomplete fix for CVE-2019-19880.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19926"
    },
    {
      "cve": "CVE-2019-19956",
      "cwe": {
        "id": "CWE-772",
        "name": "Missing Release of Resource after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "xmlParseBalancedChunkMemoryRecover in parser.c in libxml2 before 2.9.10 has a memory leak related to newDoc-\u003eoldNs.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19956"
    },
    {
      "cve": "CVE-2019-19959",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ext/misc/zipfile.c in SQLite 3.30.1 mishandles certain uses of INSERT INTO in situations involving embedded \u0027\\0\u0027 characters in filenames, leading to a memory-management error that can be detected by (for example) valgrind.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19959"
    },
    {
      "cve": "CVE-2019-20218",
      "cwe": {
        "id": "CWE-755",
        "name": "Improper Handling of Exceptional Conditions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "selectExpander in select.c in SQLite 3.30.1 proceeds with WITH stack unwinding even after a parsing error.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-20218"
    },
    {
      "cve": "CVE-2019-20367",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nlist.c in libbsd before 0.10.0 has an out-of-bounds read during a comparison for a symbol name from the string table (strtab).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-20367"
    },
    {
      "cve": "CVE-2019-20388",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "xmlSchemaPreRun in xmlschemas.c in libxml2 2.9.10 allows an xmlSchemaValidateStream memory leak.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-20388"
    },
    {
      "cve": "CVE-2019-20795",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "iproute2 before 5.1.0 has a use-after-free in get_netnsid_from_name in ip/ipnetns.c. NOTE: security relevance may be limited to certain uses of setuid that, although not a default, are sometimes a configuration option offered to end users. Even when setuid is used, other factors (such as C library configuration) may block exploitability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-20795"
    },
    {
      "cve": "CVE-2019-20907",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Lib/tarfile.py in Python through 3.8.3, an attacker is able to craft a TAR archive leading to an infinite loop when opened by tarfile.open, because _proc_pax lacks header validation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-20907"
    },
    {
      "cve": "CVE-2019-25013",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The iconv feature in the GNU C Library (aka glibc or libc6) through 2.32, when processing invalid multi-byte input sequences in the EUC-KR encoding, may have a buffer over-read.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-25013"
    },
    {
      "cve": "CVE-2019-1010022",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "** DISPUTED ** GNU Libc current is affected by: Mitigation bypass. The impact is: Attacker may bypass stack guard protection. The component is: nptl. The attack vector is: Exploit stack buffer overflow vulnerability and use this bypass vulnerability to bypass stack guard. NOTE: Upstream comments indicate \"this is being treated as a non-security bug and no real threat.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-1010022"
    },
    {
      "cve": "CVE-2019-1010023",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "** DISPUTED ** GNU Libc current is affected by: Re-mapping current loaded library with malicious ELF file. The impact is: In worst case attacker may evaluate privileges. The component is: libld. The attack vector is: Attacker sends 2 ELF files to victim and asks to run ldd on it. ldd execute code. NOTE: Upstream comments indicate \"this is being treated as a non-security bug and no real threat.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-1010023"
    },
    {
      "cve": "CVE-2019-1010024",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "** DISPUTED ** GNU Libc current is affected by: Mitigation bypass. The impact is: Attacker may bypass ASLR using cache of thread stack and heap. The component is: glibc. NOTE: Upstream comments indicate \"this is being treated as a non-security bug and no real threat.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-1010024"
    },
    {
      "cve": "CVE-2019-1010025",
      "cwe": {
        "id": "CWE-330",
        "name": "Use of Insufficiently Random Values"
      },
      "notes": [
        {
          "category": "summary",
          "text": "** DISPUTED ** GNU Libc current is affected by: Mitigation bypass. The impact is: Attacker may guess the heap addresses of pthread_created thread. The component is: glibc. NOTE: the vendor\u0027s position is \"ASLR bypass itself is not a vulnerability.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-1010025"
    },
    {
      "cve": "CVE-2019-1010180",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU gdb All versions is affected by: Buffer Overflow - Out of bound memory access. The impact is: Deny of Service, Memory Disclosure, and Possible Code Execution. The component is: The main gdb module. The attack vector is: Open an ELF for debugging. The fixed version is: Not fixed yet.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-1010180"
    },
    {
      "cve": "CVE-2020-1712",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A heap use-after-free vulnerability was found in systemd before version v245-rc1, where asynchronous Polkit queries are performed while handling dbus messages. A local unprivileged attacker can abuse this flaw to crash systemd services or potentially execute code and elevate their privileges, by sending specially crafted dbus messages.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-1712"
    },
    {
      "cve": "CVE-2020-1751",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds write vulnerability was found in glibc before 2.31 when handling signal trampolines on PowerPC. Specifically, the backtrace function did not properly check the array bounds when storing the frame address, resulting in a denial of service or potential code execution. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-1751"
    },
    {
      "cve": "CVE-2020-1752",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability introduced in glibc upstream version 2.14 was found in the way the tilde expansion was carried out. Directory paths containing an initial tilde followed by a valid username were affected by this issue. A local attacker could exploit this flaw by creating a specially crafted path that, when processed by the glob function, would potentially lead to arbitrary code execution. This was fixed in version 2.32.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-1752"
    },
    {
      "cve": "CVE-2020-6096",
      "cwe": {
        "id": "CWE-195",
        "name": "Signed to Unsigned Conversion Error"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An exploitable signed comparison vulnerability exists in the ARMv7 memcpy() implementation of GNU glibc 2.30.9000. Calling memcpy() (on ARMv7 targets that utilize the GNU glibc implementation) with a negative value for the \u0027num\u0027 parameter results in a signed comparison vulnerability. If an attacker underflows the \u0027num\u0027 parameter to memcpy(), this vulnerability could lead to undefined behavior such as writing to out-of-bounds memory and potentially remote code execution. Furthermore, this memcpy() implementation allows for program execution to continue in scenarios where a segmentation fault or crash should have occurred. The dangers occur in that subsequent execution and iterations of this code will be executed with this corrupted data.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-6096"
    },
    {
      "cve": "CVE-2020-7595",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "xmlStringLenDecodeEntities in parser.c in libxml2 2.9.10 has an infinite loop in a certain end-of-file situation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-7595"
    },
    {
      "cve": "CVE-2020-8169",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The libcurl library versions 7.62.0 to and including  7.70.0 are vulnerable to an information disclosure vulnerability that can lead to a partial password being leaked over the network and to the DNS server(s).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-8169"
    },
    {
      "cve": "CVE-2020-8177",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl 7.20.0 through 7.70.0 is vulnerable to improper restriction of names for files and other resources that can lead too overwriting a local file when the -J flag is used.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-8177"
    },
    {
      "cve": "CVE-2020-8231",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Due to use of a dangling pointer, libcurl 7.29.0 through 7.71.1 can use the wrong connection when sending data.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-8231"
    },
    {
      "cve": "CVE-2020-8284",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A malicious server can use the FTP PASV response to trick curl 7.73.0 and earlier into connecting back to a given IP address and port, and this way potentially make curl extract information about services that are otherwise private and not disclosed, for example doing port scanning and service banner extractions.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-8284"
    },
    {
      "cve": "CVE-2020-8285",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl 7.21.0 to and including 7.73.0 is vulnerable to uncontrolled recursion due to a stack overflow issue in FTP wildcard match parsing.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-8285"
    },
    {
      "cve": "CVE-2020-8286",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The libcurl library versions 7.41.0 to and including  7.73.0 are vulnerable to an improper check for certificate revocation due to insufficient verification of the OCSP response. This vulnerability could allow an attacker to pass a revoked certificate as valid.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-8286"
    },
    {
      "cve": "CVE-2020-8315",
      "cwe": {
        "id": "CWE-427",
        "name": "Uncontrolled Search Path Element"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Python (CPython) 3.6 through 3.6.10, 3.7 through 3.7.6, and 3.8 through 3.8.1, an insecure dependency load upon launch on Windows 7 may result in an attacker\u0027s copy of api-ms-win-core-path-l1-1-0.dll being loaded and used instead of the system\u0027s copy. Windows 8 and later are unaffected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-8315"
    },
    {
      "cve": "CVE-2020-8492",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Python 2.7 through 2.7.17, 3.5 through 3.5.9, 3.6 through 3.6.10, 3.7 through 3.7.6, and 3.8 through 3.8.1 allows an HTTP server to conduct Regular Expression Denial of Service (ReDoS) attacks against a client because of urllib.request.AbstractBasicAuthHandler catastrophic backtracking.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-8492"
    },
    {
      "cve": "CVE-2020-9327",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite 3.31.1, isAuxiliaryVtabOperator allows attackers to trigger a NULL pointer dereference and segmentation fault because of generated column optimizations.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-9327"
    },
    {
      "cve": "CVE-2020-10029",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The GNU C Library (aka glibc or libc6) before 2.32 could overflow an on-stack buffer during range reduction if an input to an 80-bit long double function contains a non-canonical bit pattern, a seen when passing a 0x5d414141414141410000 value to sinl on x86 targets. This is related to sysdeps/ieee754/ldbl-96/e_rem_pio2l.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-10029"
    },
    {
      "cve": "CVE-2020-10531",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in International Components for Unicode (ICU) for C/C++ through 66.1. An integer overflow, leading to a heap-based buffer overflow, exists in the UnicodeString::doAppend() function in common/unistr.cpp.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-10531"
    },
    {
      "cve": "CVE-2020-10543",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Perl before 5.30.3 on 32-bit platforms allows a heap-based buffer overflow because nested regular expression quantifiers have an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.2,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-10543"
    },
    {
      "cve": "CVE-2020-10735",
      "cwe": {
        "id": "CWE-704",
        "name": "Incorrect Type Conversion or Cast"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in python. In algorithms with quadratic time complexity using non-binary bases, when using int(\"text\"), a system could take 50ms to parse an int string with 100,000 digits and 5s for 1,000,000 digits (float, decimal, int.from_bytes(), and int() for binary bases 2, 4, 8, 16, and 32 are not affected). The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-10735"
    },
    {
      "cve": "CVE-2020-10878",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Perl before 5.30.3 has an integer overflow related to mishandling of a \"PL_regkind[OP(n)] == NOTHING\" situation. A crafted regular expression could lead to malformed bytecode with a possibility of instruction injection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.6,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-10878"
    },
    {
      "cve": "CVE-2020-11501",
      "cwe": {
        "id": "CWE-330",
        "name": "Use of Insufficiently Random Values"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GnuTLS 3.6.x before 3.6.13 uses incorrect cryptography for DTLS. The earliest affected version is 3.6.3 (2018-07-16) because of an error in a 2017-10-06 commit. The DTLS client always uses 32 \u0027\\0\u0027 bytes instead of a random value, and thus contributes no randomness to a DTLS negotiation. This breaks the security guarantees of the DTLS protocol.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-11501"
    },
    {
      "cve": "CVE-2020-11655",
      "cwe": {
        "id": "CWE-665",
        "name": "Improper Initialization"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite through 3.31.1 allows attackers to cause a denial of service (segmentation fault) via a malformed window-function query because the AggInfo object\u0027s initialization is mishandled.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-11655"
    },
    {
      "cve": "CVE-2020-11656",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite through 3.31.1, the ALTER TABLE implementation has a use-after-free, as demonstrated by an ORDER BY clause that belongs to a compound SELECT statement.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-11656"
    },
    {
      "cve": "CVE-2020-12062",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The scp client in OpenSSH 8.2 incorrectly sends duplicate responses to the server upon a utimes system call failure, which allows a malicious unprivileged user on the remote server to overwrite arbitrary files in the client\u0027s download directory by creating a crafted subdirectory anywhere on the remote server. The victim must use the command scp -rp to download a file hierarchy containing, anywhere inside, this crafted subdirectory. NOTE: the vendor points out that \"this attack can achieve no more than a hostile peer is already able to achieve within the scp protocol\" and \"utimes does not fail under normal circumstances.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-12062"
    },
    {
      "cve": "CVE-2020-12243",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In filter.c in slapd in OpenLDAP before 2.4.50, LDAP search filters with nested boolean expressions can result in denial of service (daemon crash).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-12243"
    },
    {
      "cve": "CVE-2020-12723",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "regcomp.c in Perl before 5.30.3 allows a buffer overflow via a crafted regular expression because of recursive S_study_chunk calls.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-12723"
    },
    {
      "cve": "CVE-2020-12762",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "json-c through 0.14 has an integer overflow and out-of-bounds write via a large JSON file, as demonstrated by printbuf_memappend.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-12762"
    },
    {
      "cve": "CVE-2020-13434",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite through 3.32.0 has an integer overflow in sqlite3_str_vappendf in printf.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-13434"
    },
    {
      "cve": "CVE-2020-13435",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite through 3.32.0 has a segmentation fault in sqlite3ExprCodeTarget in expr.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-13435"
    },
    {
      "cve": "CVE-2020-13529",
      "cwe": {
        "id": "CWE-290",
        "name": "Authentication Bypass by Spoofing"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An exploitable denial-of-service vulnerability exists in Systemd 245. A specially crafted DHCP FORCERENEW packet can cause a server running the DHCP client to be vulnerable to a DHCP ACK spoofing attack. An attacker can forge a pair of FORCERENEW and DCHP ACK packets to reconfigure the server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:A/AC:H/PR:N/UI:N/S:C/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-13529"
    },
    {
      "cve": "CVE-2020-13630",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ext/fts3/fts3.c in SQLite before 3.32.0 has a use-after-free in fts3EvalNextRow, related to the snippet feature.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-13630"
    },
    {
      "cve": "CVE-2020-13631",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite before 3.32.0 allows a virtual table to be renamed to the name of one of its shadow tables, related to alter.c and build.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-13631"
    },
    {
      "cve": "CVE-2020-13632",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ext/fts3/fts3_snippet.c in SQLite before 3.32.0 has a NULL pointer dereference via a crafted matchinfo() query.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-13632"
    },
    {
      "cve": "CVE-2020-13776",
      "cwe": {
        "id": "CWE-269",
        "name": "Improper Privilege Management"
      },
      "notes": [
        {
          "category": "summary",
          "text": "systemd through v245 mishandles numerical usernames such as ones composed of decimal digits or 0x followed by hex digits, as demonstrated by use of root privileges when privileges of the 0x0 user account were intended. NOTE: this issue exists because of an incomplete fix for CVE-2017-1000082.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-13776"
    },
    {
      "cve": "CVE-2020-13777",
      "cwe": {
        "id": "CWE-327",
        "name": "Use of a Broken or Risky Cryptographic Algorithm"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GnuTLS 3.6.x before 3.6.14 uses incorrect cryptography for encrypting a session ticket (a loss of confidentiality in TLS 1.2, and an authentication bypass in TLS 1.3). The earliest affected version is 3.6.4 (2018-09-24) because of an error in a 2018-09-18 commit. Until the first key rotation, the TLS server always uses wrong data in place of an encryption key derived from an application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-13777"
    },
    {
      "cve": "CVE-2020-13871",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite 3.32.2 has a use-after-free in resetAccumulator in select.c because the parse tree rewrite for window functions is too late.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-13871"
    },
    {
      "cve": "CVE-2020-14145",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The client side in OpenSSH 5.7 through 8.4 has an Observable Discrepancy leading to an information leak in the algorithm negotiation. This allows man-in-the-middle attackers to target initial connection attempts (where no host key for the server has been cached by the client). NOTE: some reports state that 8.5 and 8.6 are also affected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-14145"
    },
    {
      "cve": "CVE-2020-14422",
      "cwe": {
        "id": "CWE-682",
        "name": "Incorrect Calculation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Lib/ipaddress.py in Python through 3.8.3 improperly computes hash values in the IPv4Interface and IPv6Interface classes, which might allow a remote attacker to cause a denial of service if an application is affected by the performance of a dictionary containing IPv4Interface or IPv6Interface objects, and this attacker can cause many dictionary entries to be created. This is fixed in: v3.5.10, v3.5.10rc1; v3.6.12; v3.7.9; v3.8.4, v3.8.4rc1, v3.8.5, v3.8.6, v3.8.6rc1; v3.9.0, v3.9.0b4, v3.9.0b5, v3.9.0rc1, v3.9.0rc2.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-14422"
    },
    {
      "cve": "CVE-2020-15358",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite before 3.32.3, select.c mishandles query-flattener optimization, leading to a multiSelectOrderBy heap overflow because of misuse of transitive properties for constant propagation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-15358"
    },
    {
      "cve": "CVE-2020-15523",
      "cwe": {
        "id": "CWE-427",
        "name": "Uncontrolled Search Path Element"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Python 3.6 through 3.6.10, 3.7 through 3.7.8, 3.8 through 3.8.4rc1, and 3.9 through 3.9.0b4 on Windows, a Trojan horse python3.dll might be used in cases where CPython is embedded in a native application. This occurs because python3X.dll may use an invalid search path for python3.dll loading (after Py_SetPath has been used). NOTE: this issue CANNOT occur when using python.exe from a standard (non-embedded) Python installation on Windows.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-15523"
    },
    {
      "cve": "CVE-2020-15778",
      "cwe": {
        "id": "CWE-78",
        "name": "Improper Neutralization of Special Elements used in an OS Command (\u0027OS Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "scp in OpenSSH through 8.3p1 allows command injection in the scp.c toremote function, as demonstrated by backtick characters in the destination argument. NOTE: the vendor reportedly has stated that they intentionally omit validation of \"anomalous argument transfers\" because that could \"stand a great chance of breaking existing workflows.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-15778"
    },
    {
      "cve": "CVE-2020-15801",
      "cwe": {
        "id": "CWE-426",
        "name": "Untrusted Search Path"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Python 3.8.4, sys.path restrictions specified in a python38._pth file are ignored, allowing code to be loaded from arbitrary locations. The \u003cexecutable-name\u003e._pth file (e.g., the python._pth file) is not affected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-15801"
    },
    {
      "cve": "CVE-2020-19185",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer Overflow vulnerability in one_one_mapping function in progs/dump_entry.c:1373 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-19185"
    },
    {
      "cve": "CVE-2020-19186",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer Overflow vulnerability in _nc_find_entry function in tinfo/comp_hash.c:66 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-19186"
    },
    {
      "cve": "CVE-2020-19187",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer Overflow vulnerability in fmt_entry function in progs/dump_entry.c:1100 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-19187"
    },
    {
      "cve": "CVE-2020-19188",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer Overflow vulnerability in fmt_entry function in progs/dump_entry.c:1116 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-19188"
    },
    {
      "cve": "CVE-2020-19189",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer Overflow vulnerability in postprocess_terminfo function in tinfo/parse_entry.c:997 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-19189"
    },
    {
      "cve": "CVE-2020-19190",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer Overflow vulnerability in _nc_find_entry in tinfo/comp_hash.c:70 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-19190"
    },
    {
      "cve": "CVE-2020-19909",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Integer overflow vulnerability in tool_operate.c in curl 7.65.2 via a large value as the retry delay. NOTE: many parties report that this has no direct security impact on the curl user; however, it may (in theory) cause a denial of service to associated systems or networks if, for example, --retry-delay is misinterpreted as a value much smaller than what was intended. This is not especially plausible because the overflow only happens if the user was trying to specify that curl should wait weeks (or longer) before trying to recover from a transient error.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-19909"
    },
    {
      "cve": "CVE-2020-21047",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The libcpu component which is used by libasm of elfutils version 0.177 (git 47780c9e), suffers from denial-of-service vulnerability caused by application crashes due to out-of-bounds write (CWE-787), off-by-one error (CWE-193) and reachable assertion (CWE-617); to exploit the vulnerability, the attackers need to craft certain ELF files which bypass the missing bound checks.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-21047"
    },
    {
      "cve": "CVE-2020-21913",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "International Components for Unicode (ICU-20850) v66.1 was discovered to contain a use after free bug in the pkg_createWithAssemblyCode function in the file tools/pkgdata/pkgdata.cpp.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-21913"
    },
    {
      "cve": "CVE-2020-22218",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in function _libssh2_packet_add in libssh2 1.10.0 allows attackers to access out of bounds memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-22218"
    },
    {
      "cve": "CVE-2020-24659",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in GnuTLS before 3.6.15. A server can trigger a NULL pointer dereference in a TLS 1.3 client if a no_renegotiation alert is sent with unexpected timing, and then an invalid second handshake occurs. The crash happens in the application\u0027s error handling path, where the gnutls_deinit function is called after detecting a handshake failure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-24659"
    },
    {
      "cve": "CVE-2020-24977",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNOME project libxml2 v2.9.10 has a global buffer over-read vulnerability in xmlEncodeEntitiesInternal at libxml2/entities.c. The issue has been fixed in commit 50f06b3e.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-24977"
    },
    {
      "cve": "CVE-2020-25692",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer dereference was found in OpenLDAP server and was fixed in openldap 2.4.55, during a request for renaming RDNs. An unauthenticated attacker could remotely crash the slapd process by sending a specially crafted request, causing a Denial of Service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-25692"
    },
    {
      "cve": "CVE-2020-25709",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in OpenLDAP. This flaw allows an attacker who can send a malicious packet to be processed by OpenLDAP\u2019s slapd server, to trigger an assertion failure. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-25709"
    },
    {
      "cve": "CVE-2020-25710",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in OpenLDAP in versions before 2.4.56. This flaw allows an attacker who sends a malicious packet processed by OpenLDAP to force a failed assertion in csnNormalize23(). The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-25710"
    },
    {
      "cve": "CVE-2020-26116",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "http.client in Python 3.x before 3.5.10, 3.6.x before 3.6.12, 3.7.x before 3.7.9, and 3.8.x before 3.8.5 allows CRLF injection if the attacker controls the HTTP request method, as demonstrated by inserting CR and LF control characters in the first argument of HTTPConnection.request.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.2,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-26116"
    },
    {
      "cve": "CVE-2020-27618",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The iconv function in the GNU C Library (aka glibc or libc6) 2.32 and earlier, when processing invalid multi-byte input sequences in IBM1364, IBM1371, IBM1388, IBM1390, and IBM1399 encodings, fails to advance the input state, which could lead to an infinite loop in applications, resulting in a denial of service, a different vulnerability from CVE-2016-10228.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-27618"
    },
    {
      "cve": "CVE-2020-28196",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "MIT Kerberos 5 (aka krb5) before 1.17.2 and 1.18.x before 1.18.3 allows unbounded recursion via an ASN.1-encoded Kerberos message because the lib/krb5/asn.1/asn1_encode.c support for BER indefinite lengths lacks a recursion limit.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-28196"
    },
    {
      "cve": "CVE-2020-29361",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in p11-kit 0.21.1 through 0.23.21. Multiple integer overflows have been discovered in the array allocations in the p11-kit library and the p11-kit list command, where overflow checks are missing before calling realloc or calloc.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-29361"
    },
    {
      "cve": "CVE-2020-29362",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in p11-kit 0.21.1 through 0.23.21. A heap-based buffer over-read has been discovered in the RPC protocol used by thep11-kit server/remote commands and the client library. When the remote entity supplies a byte array through a serialized PKCS#11 function call, the receiving entity may allow the reading of up to 4 bytes of memory past the heap allocation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-29362"
    },
    {
      "cve": "CVE-2020-29363",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in p11-kit 0.23.6 through 0.23.21. A heap-based buffer overflow has been discovered in the RPC protocol used by p11-kit server/remote commands and the client library. When the remote entity supplies a serialized byte array in a CK_ATTRIBUTE, the receiving entity may not allocate sufficient length for the buffer to store the deserialized value.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-29363"
    },
    {
      "cve": "CVE-2020-29562",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The iconv function in the GNU C Library (aka glibc or libc6) 2.30 to 2.32, when converting UCS4 text containing an irreversible character, fails an assertion in the code path and aborts the program, potentially resulting in a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.8,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:L/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-29562"
    },
    {
      "cve": "CVE-2020-29573",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "sysdeps/i386/ldbl2mpn.c in the GNU C Library (aka glibc or libc6) before 2.23 on x86 targets has a stack-based buffer overflow if the input to any of the printf family of functions is an 80-bit long double with a non-canonical bit pattern, as seen when passing a \\x00\\x04\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x04 value to sprintf. NOTE: the issue does not affect glibc by default in 2016 or later (i.e., 2.23 or later) because of commits made in 2015 for inlining of C99 math functions through use of GCC built-ins. In other words, the reference to 2.23 is intentional despite the mention of \"Fixed for glibc 2.33\" in the 26649 reference.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-29573"
    },
    {
      "cve": "CVE-2020-35525",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQlite 3.31.1, a potential null pointer derreference was found in the INTERSEC query processing.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-35525"
    },
    {
      "cve": "CVE-2020-35527",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite 3.31.1, there is an out of bounds access problem through ALTER TABLE for views that have a nested FROM clause.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-35527"
    },
    {
      "cve": "CVE-2020-36221",
      "cwe": {
        "id": "CWE-191",
        "name": "Integer Underflow (Wrap or Wraparound)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer underflow was discovered in OpenLDAP before 2.4.57 leading to slapd crashes in the Certificate Exact Assertion processing, resulting in denial of service (schema_init.c serialNumberAndIssuerCheck).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-36221"
    },
    {
      "cve": "CVE-2020-36222",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading to an assertion failure in slapd in the saslAuthzTo validation, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-36222"
    },
    {
      "cve": "CVE-2020-36223",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading to a slapd crash in the Values Return Filter control handling, resulting in denial of service (double free and out-of-bounds read).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-36223"
    },
    {
      "cve": "CVE-2020-36224",
      "cwe": {
        "id": "CWE-763",
        "name": "Release of Invalid Pointer or Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading to an invalid pointer free and slapd crash in the saslAuthzTo processing, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-36224"
    },
    {
      "cve": "CVE-2020-36225",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading to a double free and slapd crash in the saslAuthzTo processing, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-36225"
    },
    {
      "cve": "CVE-2020-36226",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading to a memch-\u003ebv_len miscalculation and slapd crash in the saslAuthzTo processing, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-36226"
    },
    {
      "cve": "CVE-2020-36227",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading to an infinite loop in slapd with the cancel_extop Cancel operation, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-36227"
    },
    {
      "cve": "CVE-2020-36228",
      "cwe": {
        "id": "CWE-191",
        "name": "Integer Underflow (Wrap or Wraparound)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer underflow was discovered in OpenLDAP before 2.4.57 leading to a slapd crash in the Certificate List Exact Assertion processing, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-36228"
    },
    {
      "cve": "CVE-2020-36229",
      "cwe": {
        "id": "CWE-843",
        "name": "Access of Resource Using Incompatible Type (\u0027Type Confusion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in ldap_X509dn2bv in OpenLDAP before 2.4.57 leading to a slapd crash in the X.509 DN parsing in ad_keystring, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-36229"
    },
    {
      "cve": "CVE-2020-36230",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading in an assertion failure in slapd in the X.509 DN parsing in decode.c ber_next_element, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-36230"
    },
    {
      "cve": "CVE-2021-3177",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Python 3.x through 3.9.1 has a buffer overflow in PyCArg_repr in _ctypes/callproc.c, which may lead to remote code execution in certain Python applications that accept floating-point numbers as untrusted input, as demonstrated by a 1e300 argument to c_double.from_param. This occurs because sprintf is used unsafely.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3177"
    },
    {
      "cve": "CVE-2021-3326",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The iconv function in the GNU C Library (aka glibc or libc6) 2.32 and earlier, when processing invalid input sequences in the ISO-2022-JP-3 encoding, fails an assertion in the code path and aborts the program, potentially resulting in a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3326"
    },
    {
      "cve": "CVE-2021-3426",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There\u0027s a flaw in Python 3\u0027s pydoc. A local or adjacent attacker who discovers or is able to convince another local or adjacent user to start a pydoc server could access the server and use it to disclose sensitive information belonging to the other user that they would not normally be able to access. The highest risk of this flaw is to data confidentiality. This flaw affects Python versions before 3.8.9, Python versions before 3.9.3 and Python versions before 3.10.0a7.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3426"
    },
    {
      "cve": "CVE-2021-3516",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There\u0027s a flaw in libxml2\u0027s xmllint in versions before 2.9.11. An attacker who is able to submit a crafted file to be processed by xmllint could trigger a use-after-free. The greatest impact of this flaw is to confidentiality, integrity, and availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3516"
    },
    {
      "cve": "CVE-2021-3517",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a flaw in the xml entity encoding functionality of libxml2 in versions before 2.9.11. An attacker who is able to supply a crafted file to be processed by an application linked with the affected functionality of libxml2 could trigger an out-of-bounds read. The most likely impact of this flaw is to application availability, with some potential impact to confidentiality and integrity if an attacker is able to use memory information to further exploit the application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.6,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3517"
    },
    {
      "cve": "CVE-2021-3518",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There\u0027s a flaw in libxml2 in versions before 2.9.11. An attacker who is able to submit a crafted file to be processed by an application linked with libxml2 could trigger a use-after-free. The greatest impact from this flaw is to confidentiality, integrity, and availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3518"
    },
    {
      "cve": "CVE-2021-3520",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There\u0027s a flaw in lz4. An attacker who submits a crafted file to an application linked with lz4 may be able to trigger an integer overflow, leading to calling of memmove() on a negative size argument, causing an out-of-bounds write and/or a crash. The greatest impact of this flaw is to availability, with some potential impact to confidentiality and integrity as well.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3520"
    },
    {
      "cve": "CVE-2021-3537",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability found in libxml2 in versions before 2.9.11 shows that it did not propagate errors while parsing XML mixed content, causing a NULL dereference. If an untrusted XML document was parsed in recovery mode and post-validated, the flaw could be used to crash the application. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3537"
    },
    {
      "cve": "CVE-2021-3541",
      "cwe": {
        "id": "CWE-776",
        "name": "Improper Restriction of Recursive Entity References in DTDs (\u0027XML Entity Expansion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in libxml2. Exponential entity expansion attack its possible bypassing all existing protection mechanisms and leading to denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3541"
    },
    {
      "cve": "CVE-2021-3580",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the way nettle\u0027s RSA decryption functions handled specially crafted ciphertext. An attacker could use this flaw to provide a manipulated ciphertext leading to application crash and denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3580"
    },
    {
      "cve": "CVE-2021-3733",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There\u0027s a flaw in urllib\u0027s AbstractBasicAuthHandler class. An attacker who controls a malicious HTTP server that an HTTP client (such as web browser) connects to, could trigger a Regular Expression Denial of Service (ReDOS) during an authentication request with a specially crafted payload that is sent by the server to the client. The greatest threat that this flaw poses is to application availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3733"
    },
    {
      "cve": "CVE-2021-3737",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in python. An improperly handled HTTP response in the HTTP client code of python may allow a remote attacker, who controls the HTTP server, to make the client script enter an infinite loop, consuming CPU time. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3737"
    },
    {
      "cve": "CVE-2021-3826",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Heap/stack buffer overflow in the dlang_lname function in d-demangle.c in libiberty allows attackers to potentially cause a denial of service (segmentation fault and crash) via a crafted mangled symbol.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3826"
    },
    {
      "cve": "CVE-2021-3997",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in systemd. An uncontrolled recursion in systemd-tmpfiles may lead to a denial of service at boot time when too many nested directories are created in /tmp.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3997"
    },
    {
      "cve": "CVE-2021-3998",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in glibc. The realpath() function can mistakenly return an unexpected value, potentially leading to information leakage and disclosure of sensitive data.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3998"
    },
    {
      "cve": "CVE-2021-3999",
      "cwe": {
        "id": "CWE-193",
        "name": "Off-by-one Error"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in glibc. An off-by-one buffer overflow and underflow in getcwd() may lead to memory corruption when the size of the buffer is exactly 1. A local attacker who can control the input buffer and size passed to getcwd() in a setuid program could use this flaw to potentially execute arbitrary code and escalate their privileges on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3999"
    },
    {
      "cve": "CVE-2021-4122",
      "cwe": {
        "id": "CWE-345",
        "name": "Insufficient Verification of Data Authenticity"
      },
      "notes": [
        {
          "category": "summary",
          "text": "It was found that a specially crafted LUKS header could trick cryptsetup into disabling encryption during the recovery of the device. An attacker with physical access to the medium, such as a flash disk, could use this flaw to force a user into permanently disabling the encryption layer of that medium.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:P/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-4122"
    },
    {
      "cve": "CVE-2021-4189",
      "cwe": {
        "id": "CWE-252",
        "name": "Unchecked Return Value"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in Python, specifically in the FTP (File Transfer Protocol) client library in PASV (passive) mode. The issue is how the FTP client trusts the host from the PASV response by default. This flaw allows an attacker to set up a malicious FTP server that can trick FTP clients into connecting back to a given IP address and port. This vulnerability could lead to FTP client scanning ports, which otherwise would not have been possible.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-4189"
    },
    {
      "cve": "CVE-2021-4209",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer dereference flaw was found in GnuTLS. As Nettle\u0027s hash update functions internally call memcpy, providing zero-length input may cause undefined behavior. This flaw leads to a denial of service after authentication in rare circumstances.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-4209"
    },
    {
      "cve": "CVE-2021-20193",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the src/list.c of tar 1.33 and earlier. This flaw allows an attacker who can submit a crafted input file to tar to cause uncontrolled consumption of memory. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-20193"
    },
    {
      "cve": "CVE-2021-20227",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in SQLite\u0027s SELECT query functionality (src/select.c). This flaw allows an attacker who is capable of running SQL queries locally on the SQLite database to cause a denial of service or possible code execution by triggering a use-after-free. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-20227"
    },
    {
      "cve": "CVE-2021-20231",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in gnutls. A use after free issue in client sending key_share extension may lead to memory corruption and other consequences.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-20231"
    },
    {
      "cve": "CVE-2021-20232",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in gnutls. A use after free issue in client_send_params in lib/ext/pre_shared_key.c may lead to memory corruption and other potential consequences.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-20232"
    },
    {
      "cve": "CVE-2021-20305",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in Nettle in versions before 3.7.2, where several Nettle signature verification functions (GOST DSA, EDDSA \u0026 ECDSA) result in the Elliptic Curve Cryptography point (ECC) multiply function being called with out-of-range scalers, possibly resulting in incorrect results. This flaw allows an attacker to force an invalid signature, causing an assertion failure or possible validation. The highest threat to this vulnerability is to confidentiality, integrity, as well as system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-20305"
    },
    {
      "cve": "CVE-2021-22876",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl 7.1.1 to and including 7.75.0 is vulnerable to an \"Exposure of Private Personal Information to an Unauthorized Actor\" by leaking credentials in the HTTP Referer: header. libcurl does not strip off user credentials from the URL when automatically populating the Referer: HTTP request header field in outgoing HTTP requests, and therefore risks leaking sensitive data to the server that is the target of the second HTTP request.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-22876"
    },
    {
      "cve": "CVE-2021-22890",
      "cwe": {
        "id": "CWE-290",
        "name": "Authentication Bypass by Spoofing"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl 7.63.0 to and including 7.75.0 includes vulnerability that allows a malicious HTTPS proxy to MITM a connection due to bad handling of TLS 1.3 session tickets. When using a HTTPS proxy and TLS 1.3, libcurl can confuse session tickets arriving from the HTTPS proxy but work as if they arrived from the remote server and then wrongly \"short-cut\" the host handshake. When confusing the tickets, a HTTPS proxy can trick libcurl to use the wrong session ticket resume for the host and thereby circumvent the server TLS certificate check and make a MITM attack to be possible to perform unnoticed. Note that such a malicious HTTPS proxy needs to provide a certificate that curl will accept for the MITMed server for an attack to work - unless curl has been told to ignore the server certificate check.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-22890"
    },
    {
      "cve": "CVE-2021-22897",
      "cwe": {
        "id": "CWE-668",
        "name": "Exposure of Resource to Wrong Sphere"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl 7.61.0 through 7.76.1 suffers from exposure of data element to wrong session due to a mistake in the code for CURLOPT_SSL_CIPHER_LIST when libcurl is built to use the Schannel TLS library. The selected cipher set was stored in a single \"static\" variable in the library, which has the surprising side-effect that if an application sets up multiple concurrent transfers, the last one that sets the ciphers will accidentally control the set used by all transfers. In a worst-case scenario, this weakens transport security significantly.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-22897"
    },
    {
      "cve": "CVE-2021-22898",
      "cwe": {
        "id": "CWE-909",
        "name": "Missing Initialization of Resource"
      },
      "notes": [
        {
          "category": "summary",
          "text": "**NOTE: CVE-2021-22898 is an incomplete fix (see https://hackerone.com/reports/1223882)! Check if affected products also have fixed CVE-22925 instead! Do not use CVE-2021-22898 in public advisories!**\r\n\r\ncurl 7.7 through 7.76.1 suffers from an information disclosure when the `-t` command line option, known as `CURLOPT_TELNETOPTIONS` in libcurl, is used to send variable=content pairs to TELNET servers. Due to a flaw in the option parser for sending NEW_ENV variables, libcurl could be made to pass on uninitialized data from a stack based buffer to the server, resulting in potentially revealing sensitive internal information to the server using a clear-text network protocol.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.1,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-22898"
    },
    {
      "cve": "CVE-2021-22901",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl 7.75.0 through 7.76.1 suffers from a use-after-free vulnerability resulting in already freed memory being used when a TLS 1.3 session ticket arrives over a connection. A malicious server can use this in rare unfortunate circumstances to potentially reach remote code execution in the client. When libcurl at run-time sets up support for TLS 1.3 session tickets on a connection using OpenSSL, it stores pointers to the transfer in-memory object for later retrieval when a session ticket arrives. If the connection is used by multiple transfers (like with a reused HTTP/1.1 connection or multiplexed HTTP/2 connection) that first transfer object might be freed before the new session is established on that connection and then the function will access a memory buffer that might be freed. When using that memory, libcurl might even call a function pointer in the object, making it possible for a remote code execution if the server could somehow manage to get crafted memory content into the correct place in memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-22901"
    },
    {
      "cve": "CVE-2021-22922",
      "cwe": {
        "id": "CWE-354",
        "name": "Improper Validation of Integrity Check Value"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl is instructed to download content using the metalink feature, thecontents is verified against a hash provided in the metalink XML file.The metalink XML file points out to the client how to get the same contentfrom a set of different URLs, potentially hosted by different servers and theclient can then download the file from one or several of them. In a serial orparallel manner.If one of the servers hosting the contents has been breached and the contentsof the specific file on that server is replaced with a modified payload, curlshould detect this when the hash of the file mismatches after a completeddownload. It should remove the contents and instead try getting the contentsfrom another URL. This is not done, and instead such a hash mismatch is onlymentioned in text and the potentially malicious content is kept in the file ondisk.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-22922"
    },
    {
      "cve": "CVE-2021-22923",
      "cwe": {
        "id": "CWE-522",
        "name": "Insufficiently Protected Credentials"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl is instructed to get content using the metalink feature, and a user name and password are used to download the metalink XML file, those same credentials are then subsequently passed on to each of the servers from which curl will download or try to download the contents from. Often contrary to the user\u0027s expectations and intentions and without telling the user it happened.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-22923"
    },
    {
      "cve": "CVE-2021-22924",
      "cwe": {
        "id": "CWE-706",
        "name": "Use of Incorrectly-Resolved Name or Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl keeps previously used connections in a connection pool for subsequent transfers to reuse, if one of them matches the setup. Due to errors in the logic, the config matching function did not take \u0027issuercert\u0027 into account and it compared the involved paths *case insensitively*, which could lead to libcurl reusing wrong connections. File paths are, or can be, case sensitive on many systems but not all, and can even vary depending on used file systems. The comparison also didn\u0027t include the \u0027issuer cert\u0027 which a transfer can set to qualify how to verify the server certificate.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-22924"
    },
    {
      "cve": "CVE-2021-22925",
      "cwe": {
        "id": "CWE-908",
        "name": "Use of Uninitialized Resource"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl supports the `-t` command line option, known as `CURLOPT_TELNETOPTIONS` in libcurl. This rarely used option is used to send variable=content pairs to TELNET servers. Due to flaw in the option parser for sending `NEW_ENV` variables, libcurl could be made to pass on uninitialized data from a stack based buffer to the server. Therefore potentially revealing sensitive internal information to the server using a clear-text network protocol. This could happen because curl did not call and use sscanf() correctly when parsing the string provided by the application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-22925"
    },
    {
      "cve": "CVE-2021-22926",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl-using applications can ask for a specific client certificate to be used in a transfer. This is done with the `CURLOPT_SSLCERT` option (`--cert` with the command line tool).When libcurl is built to use the macOS native TLS library Secure Transport, an application can ask for the client certificate by name or with a file name - using the same option. If the name exists as a file, it will be used instead of by name.If the appliction runs with a current working directory that is writable by other users (like `/tmp`), a malicious user can create a file name with the same name as the app wants to use by name, and thereby trick the application to use the file based cert instead of the one referred to by name making libcurl send the wrong client certificate in the TLS connection handshake.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-22926"
    },
    {
      "cve": "CVE-2021-22945",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When sending data to an MQTT server, libcurl \u003c= 7.73.0 and 7.78.0 could in some circumstances erroneously keep a pointer to an already freed memory area and both use that again in a subsequent call to send data and also free it *again*.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-22945"
    },
    {
      "cve": "CVE-2021-22946",
      "cwe": {
        "id": "CWE-319",
        "name": "Cleartext Transmission of Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A user can tell curl \u003e= 7.20.0 and \u003c= 7.78.0 to require a successful upgrade to TLS when speaking to an IMAP, POP3 or FTP server (`--ssl-reqd` on the command line or`CURLOPT_USE_SSL` set to `CURLUSESSL_CONTROL` or `CURLUSESSL_ALL` withlibcurl). This requirement could be bypassed if the server would return a properly crafted but perfectly legitimate response.This flaw would then make curl silently continue its operations **withoutTLS** contrary to the instructions and expectations, exposing possibly sensitive data in clear text over the network.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-22946"
    },
    {
      "cve": "CVE-2021-22947",
      "cwe": {
        "id": "CWE-345",
        "name": "Insufficient Verification of Data Authenticity"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl \u003e= 7.20.0 and \u003c= 7.78.0 connects to an IMAP or POP3 server to retrieve data using STARTTLS to upgrade to TLS security, the server can respond and send back multiple responses at once that curl caches. curl would then upgrade to TLS but not flush the in-queue of cached responses but instead continue using and trustingthe responses it got *before* the TLS handshake as if they were authenticated.Using this flaw, it allows a Man-In-The-Middle attacker to first inject the fake responses, then pass-through the TLS traffic from the legitimate server and trick curl into sending data back to the user thinking the attacker\u0027s injected data comes from the TLS-protected server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-22947"
    },
    {
      "cve": "CVE-2021-23336",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The package python/cpython from 0 and before 3.6.13, from 3.7.0 and before 3.7.10, from 3.8.0 and before 3.8.8, from 3.9.0 and before 3.9.2 are vulnerable to Web Cache Poisoning via urllib.parse.parse_qsl and urllib.parse.parse_qs by using a vector called parameter cloaking. When the attacker can separate query parameters using a semicolon (;), they can cause a difference in the interpretation of the request between the proxy (running with default configuration) and the server. This can result in malicious requests being cached as completely safe ones, as the proxy would usually not see the semicolon as a separator, and therefore would not include it in a cache key of an unkeyed parameter.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:N/I:L/A:H/E:P/RL:U/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-23336"
    },
    {
      "cve": "CVE-2021-27212",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In OpenLDAP through 2.4.57 and 2.5.x through 2.5.1alpha, an assertion failure in slapd can occur in the issuerAndThisUpdateCheck function via a crafted packet, resulting in a denial of service (daemon exit) via a short timestamp. This is related to schema_init.c and checkTime.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-27212"
    },
    {
      "cve": "CVE-2021-27218",
      "cwe": {
        "id": "CWE-681",
        "name": "Incorrect Conversion between Numeric Types"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in GNOME GLib before 2.66.7 and 2.67.x before 2.67.4. If g_byte_array_new_take() was called with a buffer of 4GB or more on a 64-bit platform, the length would be truncated modulo 2**32, causing unintended length truncation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-27218"
    },
    {
      "cve": "CVE-2021-27219",
      "cwe": {
        "id": "CWE-681",
        "name": "Incorrect Conversion between Numeric Types"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in GNOME GLib before 2.66.6 and 2.67.x before 2.67.3. The function g_bytes_new has an integer overflow on 64-bit platforms due to an implicit cast from 64 bits to 32 bits. The overflow could potentially lead to memory corruption.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-27219"
    },
    {
      "cve": "CVE-2021-27645",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The nameserver caching daemon (nscd) in the GNU C Library (aka glibc or libc6) 2.29 through 2.33, when processing a request for netgroup lookup, may crash due to a double-free, potentially resulting in degraded service or Denial of Service on the local system. This is related to netgroupcache.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 2.5,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-27645"
    },
    {
      "cve": "CVE-2021-28041",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ssh-agent in OpenSSH before 8.5 has a double free that may be relevant in a few less-common scenarios, such as unconstrained agent-socket access on a legacy operating system, or the forwarding of an agent to an attacker-controlled host.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:L/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-28041"
    },
    {
      "cve": "CVE-2021-28153",
      "cwe": {
        "id": "CWE-59",
        "name": "Improper Link Resolution Before File Access (\u0027Link Following\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in GNOME GLib before 2.66.8. When g_file_replace() is used with G_FILE_CREATE_REPLACE_DESTINATION to replace a path that is a dangling symlink, it incorrectly also creates the target of the symlink as an empty file, which could conceivably have security relevance if the symlink is attacker-controlled. (If the path is a symlink to a file that already exists, then the contents of that file correctly remain unchanged.)",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-28153"
    },
    {
      "cve": "CVE-2021-28363",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The urllib3 library 1.26.x before 1.26.4 for Python omits SSL certificate validation in some cases involving HTTPS to HTTPS proxies. The initial connection to the HTTPS proxy (if an SSLContext isn\u0027t given via proxy_config) doesn\u0027t verify the hostname of the certificate. This means certificates for different servers that still validate properly with the default urllib3 SSLContext will be silently accepted.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-28363"
    },
    {
      "cve": "CVE-2021-28861",
      "cwe": {
        "id": "CWE-601",
        "name": "URL Redirection to Untrusted Site (\u0027Open Redirect\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Python 3.x through 3.10 has an open redirection vulnerability in lib/http/server.py due to no protection against multiple (/) at the beginning of URI path which may leads to information disclosure. NOTE: this is disputed by a third party because the http.server.html documentation page states \"Warning: http.server is not recommended for production. It only implements basic security checks.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-28861"
    },
    {
      "cve": "CVE-2021-31239",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue found in SQLite SQLite3 v.3.35.4 that could allow a remote attacker to cause a denial of service via the appendvfs.c function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-31239"
    },
    {
      "cve": "CVE-2021-32292",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in json-c from 20200420 (post 0.14 unreleased code) through 0.15-20200726. A stack-buffer-overflow exists in the auxiliary sample program json_parse which is located in the function parseit.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-32292"
    },
    {
      "cve": "CVE-2021-33294",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In elfutils 0.183, an infinite loop was found in the function handle_symtab in readelf.c .Which allows attackers to cause a denial of service (infinite loop) via crafted file.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-33294"
    },
    {
      "cve": "CVE-2021-33560",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Libgcrypt before 1.8.8 and 1.9.x before 1.9.3 mishandles ElGamal encryption because it lacks exponent blinding to address a side-channel attack against mpi_powm, and the window size is not chosen appropriately. This, for example, affects use of ElGamal in OpenPGP.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-33560"
    },
    {
      "cve": "CVE-2021-33574",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The mq_notify function in the GNU C Library (aka glibc) versions 2.32 and 2.33 has a use-after-free. It may use the notification thread attributes object (passed through its struct sigevent parameter) after it has been freed by the caller, leading to a denial of service (application crash) or possibly unspecified other impact.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-33574"
    },
    {
      "cve": "CVE-2021-33910",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The use of alloca function with an uncontrolled size in function unit_name_path_escape allows a local attacker, able to mount a filesystem on a very long path, to crash systemd and the whole system by allocating a very large space in the stack.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-33910"
    },
    {
      "cve": "CVE-2021-35942",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The wordexp function in the GNU C Library (aka glibc) through 2.33 may crash or read arbitrary memory in parse_param (in posix/wordexp.c) when called with an untrusted, crafted pattern, potentially resulting in a denial of service or disclosure of information. This occurs because atoi was used but strtoul should have been used to ensure correct calculations.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-35942"
    },
    {
      "cve": "CVE-2021-36084",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The CIL compiler in SELinux 3.2 has a use-after-free in __cil_verify_classperms (called from __cil_verify_classpermission and __cil_pre_verify_helper).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-36084"
    },
    {
      "cve": "CVE-2021-36085",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The CIL compiler in SELinux 3.2 has a use-after-free in __cil_verify_classperms (called from __verify_map_perm_classperms and hashtab_map).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-36085"
    },
    {
      "cve": "CVE-2021-36086",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The CIL compiler in SELinux 3.2 has a use-after-free in cil_reset_classpermission (called from cil_reset_classperms_set and cil_reset_classperms_list).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-36086"
    },
    {
      "cve": "CVE-2021-36087",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The CIL compiler in SELinux 3.2 has a heap-based buffer over-read in ebitmap_match_any (called indirectly from cil_check_neverallow). This occurs because there is sometimes a lack of checks for invalid statements in an optional block.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-36087"
    },
    {
      "cve": "CVE-2021-36222",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ec_verify in kdc/kdc_preauth_ec.c in the Key Distribution Center (KDC) in MIT Kerberos 5 (aka krb5) before 1.18.4 and 1.19.x before 1.19.2 allows remote attackers to cause a NULL pointer dereference and daemon crash. This occurs because a return value is not properly managed in a certain situation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-36222"
    },
    {
      "cve": "CVE-2021-36690",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A segmentation fault can occur in the sqlite3.exe command-line component of SQLite 3.36.0 via the idxGetTableInfo function when there is a crafted SQL query. NOTE: the vendor disputes the relevance of this report because a sqlite3.exe user already has full privileges (e.g., is intentionally allowed to execute commands). This report does NOT imply any problem in the SQLite library.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-36690"
    },
    {
      "cve": "CVE-2021-37600",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer overflow in util-linux through 2.37.1 can potentially cause a buffer overflow if an attacker were able to use system resources in a way that leads to a large number in the /proc/sysvipc/sem file. NOTE: this is unexploitable in GNU C Library environments, and possibly in all realistic environments",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-37600"
    },
    {
      "cve": "CVE-2021-37750",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The Key Distribution Center (KDC) in MIT Kerberos 5 (aka krb5) before 1.18.5 and 1.19.x before 1.19.3 has a NULL pointer dereference in kdc/do_tgs_req.c via a FAST inner body that lacks a server field.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-37750"
    },
    {
      "cve": "CVE-2021-38604",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In librt in the GNU C Library (aka glibc) through 2.34, sysdeps/unix/sysv/linux/mq_notify.c mishandles certain NOTIFY_REMOVED data, leading to a NULL pointer dereference. NOTE: this vulnerability was introduced as a side effect of the CVE-2021-33574 fix.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-38604"
    },
    {
      "cve": "CVE-2021-41617",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "sshd in OpenSSH 6.2 through 8.x before 8.8, when certain non-default configurations are used, allows privilege escalation because supplemental groups are not initialized as expected. Helper programs for AuthorizedKeysCommand and AuthorizedPrincipalsCommand may run with privileges associated with group memberships of the sshd process, if the configuration specifies running the command as a different user.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-41617"
    },
    {
      "cve": "CVE-2021-43396",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "** DISPUTED ** In iconvdata/iso-2022-jp-3.c in the GNU C Library (aka glibc) 2.34, remote attackers can force iconv() to emit a spurious \u0027\\0\u0027 character via crafted ISO-2022-JP-3 data that is accompanied by an internal state reset. This may affect data integrity in certain iconv() use cases. NOTE: the vendor states \"the bug cannot be invoked through user input and requires iconv to be invoked with a NULL inbuf, which ought to require a separate application bug to do so unintentionally. Hence there\u0027s no security impact to the bug.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-43396"
    },
    {
      "cve": "CVE-2021-43618",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU Multiple Precision Arithmetic Library (GMP) through 6.2.1 has an mpz/inp_raw.c integer overflow and resultant buffer overflow via crafted input, leading to a segmentation fault on 32-bit platforms.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-43618"
    },
    {
      "cve": "CVE-2021-44879",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In gc_data_segment in fs/f2fs/gc.c in the Linux kernel before 5.16.3, special files are not considered, leading to a move_data_page NULL pointer dereference.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-44879"
    },
    {
      "cve": "CVE-2021-45960",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Expat (aka libexpat) before 2.4.3, a left shift by 29 (or more) places in the storeAtts function in xmlparse.c can lead to realloc misbehavior (e.g., allocating too few bytes, or only freeing memory).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-45960"
    },
    {
      "cve": "CVE-2021-46143",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In doProlog in xmlparse.c in Expat (aka libexpat) before 2.4.3, an integer overflow exists for m_groupSize.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-46143"
    },
    {
      "cve": "CVE-2021-46195",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GCC v12.0 was discovered to contain an uncontrolled recursion via the component libiberty/rust-demangle.c. This vulnerability allows attackers to cause a Denial of Service (DoS) by consuming excessive CPU and memory resources.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-46195"
    },
    {
      "cve": "CVE-2021-46828",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libtirpc before 1.3.3rc1, remote attackers could exhaust the file descriptors of a process that uses libtirpc because idle TCP connections are mishandled. This can, in turn, lead to an svc_run infinite loop without accepting new connections.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-46828"
    },
    {
      "cve": "CVE-2021-46848",
      "cwe": {
        "id": "CWE-193",
        "name": "Off-by-one Error"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU Libtasn1 before 4.19.0 has an ETYPE_OK off-by-one array size check that affects asn1_encode_simple_der.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-46848"
    },
    {
      "cve": "CVE-2022-0391",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in Python, specifically within the urllib.parse module. This module helps break Uniform Resource Locator (URL) strings into components. The issue involves how the urlparse method does not sanitize input and allows characters like \u0027\\r\u0027 and \u0027\\n\u0027 in the URL path. This flaw allows an attacker to input a crafted URL, leading to injection attacks. This flaw affects Python versions prior to 3.10.0b1, 3.9.5, 3.8.11, 3.7.11 and 3.6.14.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-0391"
    },
    {
      "cve": "CVE-2022-0563",
      "cwe": {
        "id": "CWE-209",
        "name": "Generation of Error Message Containing Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the util-linux chfn and chsh utilities when compiled with Readline support. The Readline library uses an \"INPUTRC\" environment variable to get a path to the library config file. When the library cannot parse the specified file, it prints an error message containing data from the file. This flaw allows an unprivileged user to read root-owned files, potentially leading to privilege escalation. This flaw affects util-linux versions prior to 2.37.4.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-0563"
    },
    {
      "cve": "CVE-2022-0778",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The BN_mod_sqrt() function in openSSL, which computes a modular square root, contains a bug that can cause it to loop forever for non-prime moduli. Internally this function is used when parsing certificates that contain elliptic curve public keys in compressed form or explicit elliptic curve parameters with a base point encoded in compressed form. It is possible to trigger the infinite loop by crafting a certificate that has invalid explicit curve parameters. Since certificate parsing happens prior to verification of the certificate signature, any process that parses an externally supplied certificate may thus be subject to a denial of service attack. The infinite loop can also be reached when parsing crafted private keys as they can contain explicit elliptic curve parameters.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-0778"
    },
    {
      "cve": "CVE-2022-1271",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An arbitrary file write vulnerability was found in GNU gzip\u0027s zgrep utility. When zgrep is applied on the attacker\u0027s chosen file name (for example, a crafted file name), this can overwrite an attacker\u0027s content to an arbitrary attacker-selected file. This flaw occurs due to insufficient validation when processing filenames with two or more newlines where selected content and the target file names are embedded in crafted multi-line file names. This flaw allows a remote, low privileged attacker to force zgrep to write arbitrary files on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-1271"
    },
    {
      "cve": "CVE-2022-1292",
      "cwe": {
        "id": "CWE-78",
        "name": "Improper Neutralization of Special Elements used in an OS Command (\u0027OS Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The c_rehash script does not properly sanitise shell metacharacters to prevent command injection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-1292"
    },
    {
      "cve": "CVE-2022-1304",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds read/write vulnerability was found in e2fsprogs 1.46.5. This issue leads to a segmentation fault and possibly arbitrary code execution via a specially crafted filesystem.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-1304"
    },
    {
      "cve": "CVE-2022-1343",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Under certain circumstances, the command line OCSP verify function reports successful verification when the verification in fact failed. In this case the incorrect successful response will also be accompanied by error messages showing the failure and contradicting the apparently successful result.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-1343"
    },
    {
      "cve": "CVE-2022-1434",
      "cwe": {
        "id": "CWE-327",
        "name": "Use of a Broken or Risky Cryptographic Algorithm"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When using the RC4-MD5 ciphersuite, which is disabled by default, an attacker is able to modify data in transit due to an incorrect use of the AAD data as the MAC key in OpenSSL 3.0. An attacker is not able to decrypt any communication.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-1434"
    },
    {
      "cve": "CVE-2022-1473",
      "cwe": {
        "id": "CWE-404",
        "name": "Improper Resource Shutdown or Release"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The used OpenSSL version improperly reuses memory when decoding certificates or keys. This can lead to a process termination and Denial of Service for long lived processes.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-1473"
    },
    {
      "cve": "CVE-2022-2068",
      "cwe": {
        "id": "CWE-78",
        "name": "Improper Neutralization of Special Elements used in an OS Command (\u0027OS Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In addition to the c_rehash shell command injection identified in CVE-2022-1292, further circumstances where the c_rehash script does not properly sanitise shell metacharacters to prevent command injection were found by code review. When the CVE-2022-1292 was fixed it was not discovered that there are other places in the script where the file names of certificates being hashed were possibly passed to a command executed through the shell. This script is distributed by some operating systems in a manner where it is automatically executed. On such operating systems, an attacker could execute arbitrary commands with the privileges of the script. Use of the c_rehash script is considered obsolete and should be replaced by the OpenSSL rehash command line tool.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-2068"
    },
    {
      "cve": "CVE-2022-2097",
      "cwe": {
        "id": "CWE-326",
        "name": "Inadequate Encryption Strength"
      },
      "notes": [
        {
          "category": "summary",
          "text": "AES OCB mode for 32-bit x86 platforms using the AES-NI assembly optimised implementation will not encrypt the entirety of the data under some circumstances. This could reveal sixteen bytes of data that was preexisting in the memory that wasn\u0027t written. In the special case of \"in place\" encryption, sixteen bytes of the plaintext would be revealed. Since OpenSSL does not support OCB based cipher suites for TLS and DTLS, they are both unaffected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-2097"
    },
    {
      "cve": "CVE-2022-2274",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The OpenSSL 3.0.4 release introduced a serious bug in the RSA implementation for X86_64 CPUs supporting the AVX512IFMA instructions. This issue makes the RSA implementation with 2048 bit private keys incorrect on such machines and memory corruption will happen during the computation. As a consequence of the memory corruption an attacker may be able to trigger a remote code execution on the machine performing the computation. SSL/TLS servers or other servers using 2048 bit RSA private keys running on machines supporting AVX512IFMA instructions of the X86_64 architecture are affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-2274"
    },
    {
      "cve": "CVE-2022-2509",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability found in gnutls. This security flaw happens because of a double free error occurs during verification of pkcs7 signatures in gnutls_pkcs7_verify function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-2509"
    },
    {
      "cve": "CVE-2022-3715",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the bash package, where a heap-buffer overflow can occur in valid parameter_transform. This issue may lead to memory problems.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-3715"
    },
    {
      "cve": "CVE-2022-3821",
      "cwe": {
        "id": "CWE-193",
        "name": "Off-by-one Error"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An off-by-one Error issue was discovered in Systemd in format_timespan() function of time-util.c. An attacker could supply specific values for time and accuracy that leads to buffer overrun in format_timespan(), leading to a Denial of Service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-3821"
    },
    {
      "cve": "CVE-2022-4304",
      "cwe": {
        "id": "CWE-326",
        "name": "Inadequate Encryption Strength"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A timing based side channel exists in the OpenSSL RSA Decryption implementation which could be sufficient to recover a plaintext across a network in a Bleichenbacher style attack. To achieve a successful decryption an attacker would have to be able to send a very large number of trial messages for decryption. The vulnerability affects all RSA padding modes: PKCS#1 v1.5, RSA-OEAP and RSASVE. For example, in a TLS connection, RSA is commonly used by a client to send an encrypted pre-master secret to the server. An attacker that had observed a genuine connection between a client and a server could use this flaw to send trial messages to the server and record the time taken to process them. After a sufficiently large number of messages the attacker could recover the pre-master secret used for the original connection and thus be able to decrypt the application data sent over that connection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-4304"
    },
    {
      "cve": "CVE-2022-4450",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The function PEM_read_bio_ex() reads a PEM file from a BIO and parses and decodes the \"name\" (e.g. \"CERTIFICATE\"), any header data and the payload data. If the function succeeds then the \"name_out\", \"header\" and \"data\" arguments are populated with pointers to buffers containing the relevant decoded data. The caller is responsible for freeing those buffers. It is possible to construct a PEM file that results in 0 bytes of payload data. In this case PEM_read_bio_ex() will return a failure code but will populate the header argument with a pointer to a buffer that has already been freed. If the caller also frees this buffer then a double free will occur. This will most likely lead to a crash. This could be exploited by an attacker who has the ability to supply malicious PEM files for parsing to achieve a denial of service attack. The functions PEM_read_bio() and PEM_read() are simple wrappers around PEM_read_bio_ex() and therefore these functions are also directly affected. These functions are also called indirectly by a number of other OpenSSL functions including PEM_X509_INFO_read_bio_ex() and SSL_CTX_use_serverinfo_file() which are also vulnerable. Some OpenSSL internal uses of these functions are not vulnerable because the caller does not free the header argument if PEM_read_bio_ex() returns a failure code. These locations include the PEM_read_bio_TYPE() functions as well as the decoders introduced in OpenSSL 3.0. The OpenSSL asn1parse command line application is also impacted by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-4450"
    },
    {
      "cve": "CVE-2022-22576",
      "cwe": {
        "id": "CWE-287",
        "name": "Improper Authentication"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S), IMAP(S), POP3(S) and LDAP(S) (openldap only).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-22576"
    },
    {
      "cve": "CVE-2022-22822",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "addBinding in xmlparse.c in Expat (aka libexpat) before 2.4.3 has an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-22822"
    },
    {
      "cve": "CVE-2022-22823",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "build_model in xmlparse.c in Expat (aka libexpat) before 2.4.3 has an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-22823"
    },
    {
      "cve": "CVE-2022-22824",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "defineAttribute in xmlparse.c in Expat (aka libexpat) before 2.4.3 has an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-22824"
    },
    {
      "cve": "CVE-2022-22825",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "lookup in xmlparse.c in Expat (aka libexpat) before 2.4.3 has an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-22825"
    },
    {
      "cve": "CVE-2022-22826",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nextScaffoldPart in xmlparse.c in Expat (aka libexpat) before 2.4.3 has an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-22826"
    },
    {
      "cve": "CVE-2022-22827",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "storeAtts in xmlparse.c in Expat (aka libexpat) before 2.4.3 has an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-22827"
    },
    {
      "cve": "CVE-2022-23218",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The deprecated compatibility function svcunix_create in the sunrpc module of the GNU C Library (aka glibc) through 2.34 copies its path argument on the stack without validating its length, which may result in a buffer overflow, potentially resulting in a denial of service or (if an application is not built with a stack protector enabled) arbitrary code execution.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-23218"
    },
    {
      "cve": "CVE-2022-23219",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The deprecated compatibility function clnt_create in the sunrpc module of the GNU C Library (aka glibc) through 2.34 copies its hostname argument on the stack without validating its length, which may result in a buffer overflow, potentially resulting in a denial of service or (if an application is not built with a stack protector enabled) arbitrary code execution.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-23219"
    },
    {
      "cve": "CVE-2022-23308",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "valid.c in libxml2 before 2.9.13 has a use-after-free of ID and IDREF attributes.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-23308"
    },
    {
      "cve": "CVE-2022-23852",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Expat (aka libexpat) before 2.4.4 has a signed integer overflow in XML_GetBuffer, for configurations with a nonzero XML_CONTEXT_BYTES.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-23852"
    },
    {
      "cve": "CVE-2022-23990",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Expat (aka libexpat) before 2.4.4 has an integer overflow in the doProlog function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-23990"
    },
    {
      "cve": "CVE-2022-24407",
      "cwe": {
        "id": "CWE-89",
        "name": "Improper Neutralization of Special Elements used in an SQL Command (\u0027SQL Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Cyrus SASL 2.1.17 through 2.1.27 before 2.1.28, plugins/sql.c does not escape the password for a SQL INSERT or UPDATE statement.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-24407"
    },
    {
      "cve": "CVE-2022-25235",
      "cwe": {
        "id": "CWE-116",
        "name": "Improper Encoding or Escaping of Output"
      },
      "notes": [
        {
          "category": "summary",
          "text": "xmltok_impl.c in Expat (aka libexpat) before 2.4.5 lacks certain validation of encoding, such as checks for whether a UTF-8 character is valid in a certain context.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-25235"
    },
    {
      "cve": "CVE-2022-25236",
      "cwe": {
        "id": "CWE-668",
        "name": "Exposure of Resource to Wrong Sphere"
      },
      "notes": [
        {
          "category": "summary",
          "text": "xmlparse.c in Expat (aka libexpat) before 2.4.5 allows attackers to insert namespace-separator characters into namespace URIs.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-25236"
    },
    {
      "cve": "CVE-2022-25313",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Expat (aka libexpat) before 2.4.5, an attacker can trigger stack exhaustion in build_model via a large nesting depth in the DTD element.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-25313"
    },
    {
      "cve": "CVE-2022-25314",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Expat (aka libexpat) before 2.4.5, there is an integer overflow in copyString.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-25314"
    },
    {
      "cve": "CVE-2022-25315",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Expat (aka libexpat) before 2.4.5, there is an integer overflow in storeRawNames.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-25315"
    },
    {
      "cve": "CVE-2022-26488",
      "cwe": {
        "id": "CWE-426",
        "name": "Untrusted Search Path"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Python before 3.10.3 on Windows, local users can gain privileges because the search path is inadequately secured. The installer may allow a local attacker to add user-writable directories to the system search path. To exploit, an administrator must have installed Python for all users and enabled PATH entries. A non-administrative user can trigger a repair that incorrectly adds user-writable paths into PATH, enabling search-path hijacking of other users and system services. This affects Python (CPython) through 3.7.12, 3.8.x through 3.8.12, 3.9.x through 3.9.10, and 3.10.x through 3.10.2.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-26488"
    },
    {
      "cve": "CVE-2022-27774",
      "cwe": {
        "id": "CWE-522",
        "name": "Insufficiently Protected Credentials"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with authentication could leak credentials to other services that exist on different protocols or port numbers.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:R/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-27774"
    },
    {
      "cve": "CVE-2022-27775",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An information disclosure vulnerability exists in curl 7.65.0 to 7.82.0 are vulnerable that by using an IPv6 address that was in the connection pool but with a different zone id it could reuse a connection instead.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-27775"
    },
    {
      "cve": "CVE-2022-27776",
      "cwe": {
        "id": "CWE-522",
        "name": "Insufficiently Protected Credentials"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or cookie header data on HTTP redirects to the same host but another port number.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-27776"
    },
    {
      "cve": "CVE-2022-27778",
      "cwe": {
        "id": "CWE-706",
        "name": "Use of Incorrectly-Resolved Name or Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use of incorrectly resolved name vulnerability fixed in 7.83.1 might remove the wrong file when `--no-clobber` is used together with `--remove-on-error`.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-27778"
    },
    {
      "cve": "CVE-2022-27779",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl wrongly allows cookies to be set for Top Level Domains (TLDs) if thehost name is provided with a trailing dot.curl can be told to receive and send cookies. curl\u0027s \"cookie engine\" can bebuilt with or without [Public Suffix List](https://publicsuffix.org/)awareness. If PSL support not provided, a more rudimentary check exists to atleast prevent cookies from being set on TLDs. This check was broken if thehost name in the URL uses a trailing dot.This can allow arbitrary sites to set cookies that then would get sent to adifferent and unrelated site or domain.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-27779"
    },
    {
      "cve": "CVE-2022-27780",
      "cwe": {
        "id": "CWE-918",
        "name": "Server-Side Request Forgery (SSRF)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The curl URL parser wrongly accepts percent-encoded URL separators like \u0027/\u0027when decoding the host name part of a URL, making it a *different* URL usingthe wrong host name when it is later retrieved.For example, a URL like `http://example.com%2F127.0.0.1/`, would be allowed bythe parser and get transposed into `http://example.com/127.0.0.1/`. This flawcan be used to circumvent filters, checks and more.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-27780"
    },
    {
      "cve": "CVE-2022-27781",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl provides the `CURLOPT_CERTINFO` option to allow applications torequest details to be returned about a server\u0027s certificate chain.Due to an erroneous function, a malicious server could make libcurl built withNSS get stuck in a never-ending busy-loop when trying to retrieve thatinformation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-27781"
    },
    {
      "cve": "CVE-2022-27782",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl would reuse a previously created connection even when a TLS or SSHrelated option had been changed that should have prohibited reuse.libcurl keeps previously used connections in a connection pool for subsequenttransfers to reuse if one of them matches the setup. However, several TLS andSSH settings were left out from the configuration match checks, making themmatch too easily.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-27782"
    },
    {
      "cve": "CVE-2022-27943",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libiberty/rust-demangle.c in GNU GCC 11.2 allows stack consumption in demangle_const, as demonstrated by nm-new.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-27943"
    },
    {
      "cve": "CVE-2022-28321",
      "cwe": {
        "id": "CWE-287",
        "name": "Improper Authentication"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The Linux-PAM package before 1.5.2-6.1 for openSUSE Tumbleweed allows authentication bypass for SSH logins. The pam_access.so module doesn\u0027t correctly restrict login if a user tries to connect from an IP address that is not resolvable via DNS. In such conditions, a user with denied access to a machine can still get access. NOTE: the relevance of this issue is largely limited to openSUSE Tumbleweed and openSUSE Factory; it does not affect Linux-PAM upstream.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-28321"
    },
    {
      "cve": "CVE-2022-29155",
      "cwe": {
        "id": "CWE-89",
        "name": "Improper Neutralization of Special Elements used in an SQL Command (\u0027SQL Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In OpenLDAP 2.x before 2.5.12 and 2.6.x before 2.6.2, a SQL injection vulnerability exists in the experimental back-sql backend to slapd, via a SQL statement within an LDAP query. This can occur during an LDAP search operation when the search filter is processed, due to a lack of proper escaping.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-29155"
    },
    {
      "cve": "CVE-2022-29824",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libxml2 before 2.9.14, several buffer handling functions in buf.c (xmlBuf*) and tree.c (xmlBuffer*) don\u0027t check for integer overflows. This can result in out-of-bounds memory writes. Exploitation requires a victim to open a crafted, multi-gigabyte XML file. Other software using libxml2\u0027s buffer functions, for example libxslt through 1.1.35, is affected as well.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-29824"
    },
    {
      "cve": "CVE-2022-30115",
      "cwe": {
        "id": "CWE-319",
        "name": "Cleartext Transmission of Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Using its HSTS support, curl can be instructed to use HTTPS directly insteadof using an insecure clear-text HTTP step even when HTTP is provided in theURL. This mechanism could be bypassed if the host name in the given URL used atrailing dot while not using one when it built the HSTS cache. Or the otherway around - by having the trailing dot in the HSTS cache and *not* using thetrailing dot in the URL.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-30115"
    },
    {
      "cve": "CVE-2022-32205",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A malicious server can serve excessive amounts of \"Set-Cookie:\" headers in a HTTP response to curl and curl \u003c 7.84.0 stores all of them. A sufficiently large amount of (big) cookies make subsequent HTTP requests to this, or other servers to which the cookies match, create requests that become larger than the threshold that curl uses internally to avoid sending crazy large requests (1048576 bytes) and instead returns an error.This denial state might remain for as long as the same cookies are kept, match and haven\u0027t expired. Due to cookie matching rules, a server on \"foo.example.com\" can set cookies that also would match for \"bar.example.com\", making it it possible for a \"sister server\" to effectively cause a denial of service for a sibling site on the same second level domain using this method.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-32205"
    },
    {
      "cve": "CVE-2022-32206",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl \u003c 7.84.0 supports \"chained\" HTTP compression algorithms, meaning that a serverresponse can be compressed multiple times and potentially with different algorithms. The number of acceptable \"links\" in this \"decompression chain\" was unbounded, allowing a malicious server to insert a virtually unlimited number of compression steps.The use of such a decompression chain could result in a \"malloc bomb\", makingcurl end up spending enormous amounts of allocated heap memory, or trying toand returning out of memory errors.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-32206"
    },
    {
      "cve": "CVE-2022-32207",
      "cwe": {
        "id": "CWE-276",
        "name": "Incorrect Default Permissions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl \u003c 7.84.0 saves cookies, alt-svc and hsts data to local files, it makes the operation atomic by finalizing the operation with a rename from a temporary name to the final target file name.In that rename operation, it might accidentally *widen* the permissions for the target file, leaving the updated file accessible to more users than intended.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-32207"
    },
    {
      "cve": "CVE-2022-32208",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl \u003c 7.84.0 does FTP transfers secured by krb5, it handles message verification failures wrongly. This flaw makes it possible for a Man-In-The-Middle attack to go unnoticed and even allows it to inject data to the client.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-32208"
    },
    {
      "cve": "CVE-2022-32221",
      "cwe": {
        "id": "CWE-440",
        "name": "Expected Behavior Violation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When doing HTTP(S) transfers, libcurl might erroneously use the read callback (`CURLOPT_READFUNCTION`) to ask for data to send, even when the `CURLOPT_POSTFIELDS` option has been set, if the same handle previously was used to issue a `PUT` request which used that callback. This flaw may surprise the application and cause it to misbehave and either send off the wrong data or use memory after free or similar in the subsequent `POST` request. The problem exists in the logic for a reused handle when it is changed from a PUT to a POST.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.2,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-32221"
    },
    {
      "cve": "CVE-2022-35252",
      "cwe": {
        "id": "CWE-1286",
        "name": "Improper Validation of Syntactic Correctness of Input"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl is used to retrieve and parse cookies from a HTTP(S) server, itaccepts cookies using control codes that when later are sent back to a HTTPserver might make the server return 400 responses. Effectively allowing a\"sister site\" to deny service to all siblings.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-35252"
    },
    {
      "cve": "CVE-2022-35260",
      "cwe": {
        "id": "CWE-121",
        "name": "Stack-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl can be told to parse a `.netrc` file for credentials. If that file endsin a line with 4095 consecutive non-white space letters and no newline, curlwould first read past the end of the stack-based buffer, and if the readworks, write a zero byte beyond its boundary.This will in most cases cause a segfault or similar, but circumstances might also cause different outcomes.If a malicious user can provide a custom netrc file to an application or otherwise affect its contents, this flaw could be used as denial-of-service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.6,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-35260"
    },
    {
      "cve": "CVE-2022-35737",
      "cwe": {
        "id": "CWE-129",
        "name": "Improper Validation of Array Index"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite 1.0.12 through 3.39.x before 3.39.2 sometimes allows an array-bounds overflow if billions of bytes are used in a string argument to a C API.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-35737"
    },
    {
      "cve": "CVE-2022-37434",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "zlib through 1.2.12 has a heap-based buffer over-read or buffer overflow in inflate in inflate.c via a large gzip header extra field. NOTE: only applications that call inflateGetHeader are affected. Some common applications bundle the affected zlib source code but may be unable to call inflateGetHeader (e.g., see the nodejs/node reference).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-37434"
    },
    {
      "cve": "CVE-2022-37454",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The Keccak XKCP SHA-3 reference implementation before fdc6fef has an integer overflow and resultant buffer overflow that allows attackers to execute arbitrary code or eliminate expected cryptographic properties. This occurs in the sponge function interface.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-37454"
    },
    {
      "cve": "CVE-2022-40303",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.10.3. When parsing a multi-gigabyte XML document with the XML_PARSE_HUGE parser option enabled, several integer counters can overflow. This results in an attempt to access an array at a negative 2GB offset, typically leading to a segmentation fault.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-40303"
    },
    {
      "cve": "CVE-2022-40304",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.10.3. Certain invalid XML entity definitions can corrupt a hash table key, potentially leading to subsequent logic errors. In one case, a double-free can be provoked.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-40304"
    },
    {
      "cve": "CVE-2022-40674",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libexpat before 2.4.9 has a use-after-free in the doContent function in xmlparse.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-40674"
    },
    {
      "cve": "CVE-2022-42898",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "PAC parsing in MIT Kerberos 5 (aka krb5) before 1.19.4 and 1.20.x before 1.20.1 has integer overflows that may lead to remote code execution (in KDC, kadmind, or a GSS or Kerberos application server) on 32-bit platforms (which have a resultant heap-based buffer overflow), and cause a denial of service on other platforms. This occurs in krb5_pac_parse in lib/krb5/krb/pac.c. Heimdal before 7.7.1 has \"a similar bug.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-42898"
    },
    {
      "cve": "CVE-2022-42915",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl before 7.86.0 has a double free. If curl is told to use an HTTP proxy for a transfer with a non-HTTP(S) URL, it sets up the connection to the remote server by issuing a CONNECT request to the proxy, and then tunnels the rest of the protocol through. An HTTP proxy might refuse this request (HTTP proxies often only allow outgoing connections to specific port numbers, like 443 for HTTPS) and instead return a non-200 status code to the client. Due to flaws in the error/cleanup handling, this could trigger a double free in curl if one of the following schemes were used in the URL for the transfer: dict, gopher, gophers, ldap, ldaps, rtmp, rtmps, or telnet. The earliest affected version is 7.77.0.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-42915"
    },
    {
      "cve": "CVE-2022-42916",
      "cwe": {
        "id": "CWE-319",
        "name": "Cleartext Transmission of Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In curl before 7.86.0, the HSTS check could be bypassed to trick it into staying with HTTP. Using its HSTS support, curl can be instructed to use HTTPS directly (instead of using an insecure cleartext HTTP step) even when HTTP is provided in the URL. This mechanism could be bypassed if the host name in the given URL uses IDN characters that get replaced with ASCII counterparts as part of the IDN conversion, e.g., using the character UTF-8 U+3002 (IDEOGRAPHIC FULL STOP) instead of the common ASCII full stop of U+002E (.). The earliest affected version is 7.77.0 2021-05-26.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-42916"
    },
    {
      "cve": "CVE-2022-43551",
      "cwe": {
        "id": "CWE-319",
        "name": "Cleartext Transmission of Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability exists in curl \u003c7.87.0 HSTS check that could be bypassed to trick it to keep using HTTP. Using its HSTS support, curl can be instructed to use HTTPS instead of using an insecure clear-text HTTP step even when HTTP is provided in the URL. However, the HSTS mechanism could be bypassed if the host name in the given URL first uses IDN characters that get replaced to ASCII counterparts as part of the IDN conversion. Like using the character UTF-8 U+3002 (IDEOGRAPHIC FULL STOP) instead of the common ASCII full stop U+002E (.). Then in a subsequent request, it does not detect the HSTS state and makes a clear text transfer. Because it would store the info IDN encoded but look for it IDN decoded.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-43551"
    },
    {
      "cve": "CVE-2022-43552",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl can be asked to tunnel virtually all protocols it supports through an HTTP proxy. HTTP proxies can (and often do) deny such tunnel operations using an appropriate HTTP error response code. When getting denied to tunnel the specific protocols SMB or TELNET, curl would use a heap-allocated struct after it had been freed, in its transfer shutdown code path.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-43552"
    },
    {
      "cve": "CVE-2022-43680",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libexpat through 2.4.9, there is a use-after free caused by overeager destruction of a shared DTD in XML_ExternalEntityParserCreate in out-of-memory situations.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-43680"
    },
    {
      "cve": "CVE-2022-45061",
      "cwe": {
        "id": "CWE-407",
        "name": "Inefficient Algorithmic Complexity"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in Python before 3.11.1. An unnecessary quadratic algorithm exists in one path when processing some inputs to the IDNA (RFC 3490) decoder, such that a crafted, unreasonably long name being presented to the decoder could lead to a CPU denial of service. Hostnames are often supplied by remote servers that could be controlled by a malicious actor; in such a scenario, they could trigger excessive CPU consumption on the client attempting to make use of an attacker-supplied supposed hostname. For example, the attack payload could be placed in the Location header of an HTTP response with status code 302. A fix is planned in 3.11.1, 3.10.9, 3.9.16, 3.8.16, and 3.7.16.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-45061"
    },
    {
      "cve": "CVE-2022-45873",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "systemd 250 and 251 allows local users to achieve a systemd-coredump deadlock by triggering a crash that has a long backtrace. This occurs in parse_elf_object in shared/elf-util.c. The exploitation methodology is to crash a binary calling the same function recursively, and put it in a deeply nested directory to make its backtrace large enough to cause the deadlock. This must be done 16 times when MaxConnections=16 is set for the systemd/units/systemd-coredump.socket file.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-45873"
    },
    {
      "cve": "CVE-2022-46908",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite through 3.40.0, when relying on --safe for execution of an untrusted CLI script, does not properly implement the azProhibitedFunctions protection mechanism, and instead allows UDF functions such as WRITEFILE.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.3,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-46908"
    },
    {
      "cve": "CVE-2022-48303",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU Tar through 1.34 has a one-byte out-of-bounds read that results in use of uninitialized memory for a conditional jump. Exploitation to change the flow of control has not been demonstrated. The issue occurs in from_header in list.c via a V7 archive in which mtime has approximately 11 whitespace characters.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-48303"
    },
    {
      "cve": "CVE-2022-48522",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Perl 5.34.0, function S_find_uninit_var in sv.c has a stack-based crash that can lead to remote code execution or local privilege escalation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-48522"
    },
    {
      "cve": "CVE-2022-48560",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free exists in Python through 3.9 via heappushpop in heapq.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-48560"
    },
    {
      "cve": "CVE-2023-0215",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The public API function BIO_new_NDEF is a helper function used for streaming ASN.1 data via a BIO. It is primarily used internally to OpenSSL to support the SMIME, CMS and PKCS7 streaming capabilities, but may also be called directly by end user applications. The function receives a BIO from the caller, prepends a new BIO_f_asn1 filter BIO onto the front of it to form a BIO chain, and then returns the new head of the BIO chain to the caller. Under certain conditions, for example if a CMS recipient public key is invalid, the new filter BIO is freed and the function returns a NULL result indicating a failure. However, in this case, the BIO chain is not properly cleaned up and the BIO passed by the caller still retains internal pointers to the previously freed filter BIO. If the caller then goes on to call BIO_pop() on the BIO then a use-after-free will occur. This will most likely result in a crash. This scenario occurs directly in the internal function B64_write_ASN1() which may cause BIO_new_NDEF() to be called and will subsequently call BIO_pop() on the BIO. This internal function is in turn called by the public API functions PEM_write_bio_ASN1_stream, PEM_write_bio_CMS_stream, PEM_write_bio_PKCS7_stream, SMIME_write_ASN1, SMIME_write_CMS and SMIME_write_PKCS7. Other public API functions that may be impacted by this include i2d_ASN1_bio_stream, BIO_new_CMS, BIO_new_PKCS7, i2d_CMS_bio_stream and i2d_PKCS7_bio_stream. The OpenSSL cms and smime command line applications are similarly affected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-0215"
    },
    {
      "cve": "CVE-2023-0286",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a type confusion vulnerability relating to X.400 address processing inside an X.509 GeneralName. X.400 addresses were parsed as an ASN1_STRING but the public structure definition for GENERAL_NAME incorrectly specified the type of the x400Address field as ASN1_TYPE. This field is subsequently interpreted by the OpenSSL function GENERAL_NAME_cmp as an ASN1_TYPE rather than an ASN1_STRING. When CRL checking is enabled (i.e. the application sets the X509_V_FLAG_CRL_CHECK flag), this vulnerability may allow an attacker to pass arbitrary pointers to a memcmp call, enabling them to read memory contents or enact a denial of service. In most cases, the attack requires the attacker to provide both the certificate chain and CRL, neither of which need to have a valid signature. If the attacker only controls one of these inputs, the other input must already contain an X.400 address as a CRL distribution point, which is uncommon. As such, this vulnerability is most likely to only affect applications which have implemented their own functionality for retrieving CRLs over a network.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-0286"
    },
    {
      "cve": "CVE-2023-0361",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A timing side-channel in the handling of RSA ClientKeyExchange messages was discovered in GnuTLS. This side-channel can be sufficient to recover the key encrypted in the RSA ciphertext across a network in a Bleichenbacher style attack. To achieve a successful decryption the attacker would need to send a large amount of specially crafted messages to the vulnerable server. By recovering the secret from the ClientKeyExchange message, the attacker would be able to decrypt the application data exchanged over that connection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-0361"
    },
    {
      "cve": "CVE-2023-0464",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A security vulnerability has been identified in all supported versions of OpenSSL related to the verification of X.509 certificate chains that include policy constraints. Attackers may be able to exploit this vulnerability by creating a malicious certificate chain that triggers exponential use of computational resources, leading to a denial-of-service (DoS) attack on affected systems.\r\n\r\nPolicy processing is disabled by default but can be enabled by passing the `-policy` argument to the command line utilities or by calling the `X509_VERIFY_PARAM_set1_policies()` function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-0464"
    },
    {
      "cve": "CVE-2023-0465",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Applications that use a non-default option when verifying certificates may be\r\nvulnerable to an attack from a malicious CA to circumvent certain checks.\r\n\r\nInvalid certificate policies in leaf certificates are silently ignored by\r\nOpenSSL and other certificate policy checks are skipped for that certificate.\r\nA malicious CA could use this to deliberately assert invalid certificate policies\r\nin order to circumvent policy checking on the certificate altogether.\r\n\r\nPolicy processing is disabled by default but can be enabled by passing\r\nthe `-policy` argument to the command line utilities or by calling the\r\n`X509_VERIFY_PARAM_set1_policies()` function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-0465"
    },
    {
      "cve": "CVE-2023-0466",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The function X509_VERIFY_PARAM_add0_policy() is documented to\nimplicitly enable the certificate policy check when doing certificate\nverification. However the implementation of the function does not\nenable the check which allows certificates with invalid or incorrect\npolicies to pass the certificate verification.\n\nAs suddenly enabling the policy check could break existing deployments it was\ndecided to keep the existing behavior of the X509_VERIFY_PARAM_add0_policy()\nfunction.\n\nInstead the applications that require OpenSSL to perform certificate\npolicy check need to use X509_VERIFY_PARAM_set1_policies() or explicitly\nenable the policy check by calling X509_VERIFY_PARAM_set_flags() with\nthe X509_V_FLAG_POLICY_CHECK flag argument.\n\nCertificate policy checks are disabled by default in OpenSSL and are not\ncommonly used by applications.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-0466"
    },
    {
      "cve": "CVE-2023-0687",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in GNU C Library 2.38. It has been declared as critical. This vulnerability affects the function __monstartup of the file gmon.c of the component Call Graph Monitor. The manipulation leads to buffer overflow. It is recommended to apply a patch to fix this issue. VDB-220246 is the identifier assigned to this vulnerability. NOTE: The real existence of this vulnerability is still doubted at the moment. The inputs that induce this vulnerability are basically addresses of the running application that is built with gmon enabled. It\u0027s basically trusted input or input that needs an actual security flaw to be compromised or controlled.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.6,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:A/AC:H/PR:L/UI:N/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-0687"
    },
    {
      "cve": "CVE-2023-1077",
      "cwe": {
        "id": "CWE-843",
        "name": "Access of Resource Using Incompatible Type (\u0027Type Confusion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, pick_next_rt_entity() may return a type confused entry, not detected by the BUG_ON condition, as the confused entry will not be NULL, but list_head.The buggy error condition would lead to a type confused entry with the list head,which would then be used as a type confused sched_rt_entity,causing memory corruption.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-1077"
    },
    {
      "cve": "CVE-2023-1206",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A hash collision flaw was found in the IPv6 connection lookup table in the Linux kernel\u2019s IPv6 functionality when a user makes a new kind of SYN flood attack. A user located in the local network or with a high bandwidth connection can increase the CPU usage of the server that accepts IPV6 connections up to 95%.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-1206"
    },
    {
      "cve": "CVE-2023-2650",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Processing some specially crafted ASN.1 object identifiers or data containing them may be very slow. Impact summary: Applications that use OBJ_obj2txt() directly, or use any of the OpenSSL subsystems OCSP, PKCS7/SMIME, CMS, CMP/CRMF or TS with no message size limit may experience notable to very long delays when processing those messages, which may lead to a Denial of Service. An OBJECT IDENTIFIER is composed of a series of numbers - sub-identifiers - most of which have no size limit. OBJ_obj2txt() may be used to translate an ASN.1 OBJECT IDENTIFIER given in DER encoding form (using the OpenSSL type ASN1_OBJECT) to its canonical numeric text form, which are the sub-identifiers of the OBJECT IDENTIFIER in decimal form, separated by periods. When one of the sub-identifiers in the OBJECT IDENTIFIER is very large (these are sizes that are seen as absurdly large, taking up tens or hundreds of KiBs), the translation to a decimal number in text may take a very long time. The time complexity is O(square(n)) with \u0027n\u0027 being the size of the sub-identifiers in bytes (*). With OpenSSL 3.0, support to fetch cryptographic algorithms using names / identifiers in string form was introduced. This includes using OBJECT IDENTIFIERs in canonical numeric text form as identifiers for fetching algorithms. Such OBJECT IDENTIFIERs may be received through the ASN.1 structure AlgorithmIdentifier, which is commonly used in multiple protocols to specify what cryptographic algorithm should be used to sign or verify, encrypt or decrypt, or digest passed data. Applications that call OBJ_obj2txt() directly with untrusted data are affected, with any version of OpenSSL. If the use is for the mere purpose of display, the severity is considered low. In OpenSSL 3.0 and newer, this affects the subsystems OCSP, PKCS7/SMIME, CMS, CMP/CRMF or TS. It also impacts anything that processes X.509 certificates, including simple things like verifying its signature. The impact on TLS is relatively low, because all versions of OpenSSL have a 100KiB limit on the peer\u0027s certificate chain. Additionally, this only impacts clients, or servers that have explicitly enabled client authentication. In OpenSSL 1.1.1 and 1.0.2, this only affects displaying diverse objects, such as X.509 certificates. This is assumed to not happen in such a way that it would cause a Denial of Service, so these versions are considered not affected by this issue in such a way that it would be cause for concern, and the severity is therefore considered low.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-2650"
    },
    {
      "cve": "CVE-2023-2953",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in openldap. This security flaw causes a null pointer dereference in ber_memalloc_x() function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-2953"
    },
    {
      "cve": "CVE-2023-3212",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer dereference issue was found in the gfs2 file system in the Linux kernel. It occurs on corrupt gfs2 file systems when the evict code tries to reference the journal descriptor structure after it has been freed and set to NULL. A privileged local user could use this flaw to cause a kernel panic.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-3212"
    },
    {
      "cve": "CVE-2023-3446",
      "cwe": {
        "id": "CWE-1333",
        "name": "Inefficient Regular Expression Complexity"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. One of those checks confirms that the modulus (\u0027p\u0027 parameter) is not too large. Trying to use a very large modulus is slow and OpenSSL will not normally use a modulus which is over 10,000 bits in length. However the DH_check() function checks numerous aspects of the key or parameters that have been supplied. Some of those checks use the supplied modulus value even if it has already been found to be too large. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulernable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the \u0027-check\u0027 option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-3446"
    },
    {
      "cve": "CVE-2023-3609",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s net/sched: cls_u32 component can be exploited to achieve local privilege escalation.\r\n\r\nIf tcf_change_indev() fails, u32_set_parms() will immediately return an error after incrementing or decrementing the reference counter in tcf_bind_filter(). If an attacker can control the reference counter and set it to zero, they can cause the reference to be freed, leading to a use-after-free vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-3609"
    },
    {
      "cve": "CVE-2023-3611",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds write vulnerability in the Linux kernel\u0027s net/sched: sch_qfq component can be exploited to achieve local privilege escalation.\r\n\r\nThe qfq_change_agg() function in net/sched/sch_qfq.c allows an out-of-bounds write because lmax is updated according to packet sizes without bounds checks.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-3611"
    },
    {
      "cve": "CVE-2023-3772",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel\u0027s IP framework for transforming packets (XFRM subsystem). This issue may allow a malicious user with CAP_NET_ADMIN privileges to directly dereference a NULL pointer in xfrm_update_ae_params(), leading to a possible kernel crash and denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-3772"
    },
    {
      "cve": "CVE-2023-3817",
      "cwe": {
        "id": "CWE-834",
        "name": "Excessive Iteration"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. After fixing CVE-2023-3446 it was discovered that a large q parameter value can also trigger an overly long computation during some of these checks. A correct q value, if present, cannot be larger than the modulus p parameter, thus it is unnecessary to perform these checks if q is larger than p. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the \"-check\" option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-3817"
    },
    {
      "cve": "CVE-2023-4016",
      "cwe": {
        "id": "CWE-122",
        "name": "Heap-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Under some circumstances, this weakness allows a user who has access to run the \u201cps\u201d utility on a machine, the ability to write almost unlimited amounts of unfiltered data into the process heap.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 2.5,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-4016"
    },
    {
      "cve": "CVE-2023-4039",
      "cwe": {
        "id": "CWE-693",
        "name": "Protection Mechanism Failure"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A failure in the -fstack-protector feature in GCC-based toolchains \nthat target AArch64 allows an attacker to exploit an existing buffer \noverflow in dynamically-sized local variables in your application \nwithout this being detected. This stack-protector failure only applies \nto C99-style dynamically-sized local variables or those created using \nalloca(). The stack-protector operates as intended for statically-sized \nlocal variables.\n\nThe default behavior when the stack-protector \ndetects an overflow is to terminate your application, resulting in \ncontrolled loss of availability. An attacker who can exploit a buffer \noverflow without triggering the stack-protector might be able to change \nprogram flow control to cause an uncontrolled loss of availability or to\n go further and affect confidentiality or integrity.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.8,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-4039"
    },
    {
      "cve": "CVE-2023-4527",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in glibc. When the getaddrinfo function is called with the AF_UNSPEC address family and the system is configured with no-aaaa mode via /etc/resolv.conf, a DNS response via TCP larger than 2048 bytes can potentially disclose stack contents through the function returned address data, and may cause a crash.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-4527"
    },
    {
      "cve": "CVE-2023-4623",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s net/sched: sch_hfsc (HFSC qdisc traffic control) component can be exploited to achieve local privilege escalation.\n\nIf a class with a link-sharing curve (i.e. with the HFSC_FSC flag set) has a parent without a link-sharing curve, then init_vf() will call vttree_insert() on the parent, but vttree_remove() will be skipped in update_vf(). This leaves a dangling pointer that can cause a use-after-free.\n\nWe recommend upgrading past commit b3d26c5702c7d6c45456326e56d2ccf3f103e60f.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-4623"
    },
    {
      "cve": "CVE-2023-4806",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in glibc. In an extremely rare situation, the getaddrinfo function may access memory that has been freed, resulting in an application crash. This issue is only exploitable when a NSS module implements only the _nss_*_gethostbyname2_r and _nss_*_getcanonname_r hooks without implementing the _nss_*_gethostbyname3_r hook. The resolved name should return a large number of IPv6 and IPv4, and the call to the getaddrinfo function should have the AF_INET6 address family with AI_CANONNAME, AI_ALL and AI_V4MAPPED as flags.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-4806"
    },
    {
      "cve": "CVE-2023-4807",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: The POLY1305 MAC (message authentication code) implementation contains a bug that might corrupt the internal state of applications on the Windows 64 platform when running on newer X86_64 processors supporting the AVX512-IFMA instructions. Impact summary: If in an application that uses the OpenSSL library an attacker can influence whether the POLY1305 MAC algorithm is used, the application state might be corrupted with various application dependent consequences. The POLY1305 MAC (message authentication code) implementation in OpenSSL does not save the contents of non-volatile XMM registers on Windows 64 platform when calculating the MAC of data larger than 64 bytes. Before returning to the caller all the XMM registers are set to zero rather than restoring their previous content. The vulnerable code is used only on newer x86_64 processors supporting the AVX512-IFMA instructions. The consequences of this kind of internal application state corruption can be various - from no consequences, if the calling application does not depend on the contents of non-volatile XMM registers at all, to the worst consequences, where the attacker could get complete control of the application process. However given the contents of the registers are just zeroized so the attacker cannot put arbitrary values inside, the most likely consequence, if any, would be an incorrect result of some application dependent calculations or a crash leading to a denial of service. The POLY1305 MAC algorithm is most frequently used as part of the CHACHA20-POLY1305 AEAD (authenticated encryption with associated data) algorithm. The most common usage of this AEAD cipher is with TLS protocol versions 1.2 and 1.3 and a malicious client can influence whether this AEAD cipher is used by the server. This implies that server applications using OpenSSL can be potentially impacted. However we are currently not aware of any concrete application that would be affected by this issue therefore we consider this a Low severity security issue. As a workaround the AVX512-IFMA instructions support can be disabled at runtime by setting the environment variable OPENSSL_ia32cap: OPENSSL_ia32cap=:~0x200000 The FIPS provider is not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-4807"
    },
    {
      "cve": "CVE-2023-4813",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in glibc. In an uncommon situation, the gaih_inet function may use memory that has been freed, resulting in an application crash. This issue is only exploitable when the getaddrinfo function is called and the hosts database in /etc/nsswitch.conf is configured with SUCCESS=continue or SUCCESS=merge.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-4813"
    },
    {
      "cve": "CVE-2023-4911",
      "cwe": {
        "id": "CWE-121",
        "name": "Stack-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A buffer overflow was discovered in the GNU C Library\u0027s dynamic loader ld.so while processing the GLIBC_TUNABLES environment variable. This issue could allow a local attacker to use maliciously crafted GLIBC_TUNABLES environment variables when launching binaries with SUID permission to execute code with elevated privileges.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-4911"
    },
    {
      "cve": "CVE-2023-4921",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s net/sched: sch_qfq component can be exploited to achieve local privilege escalation.\n\nWhen the plug qdisc is used as a class of the qfq qdisc, sending network packets triggers use-after-free in qfq_dequeue() due to the incorrect .peek handler of sch_plug and lack of error checking in agg_dequeue().\n\nWe recommend upgrading past commit 8fc134fee27f2263988ae38920bc03da416b03d8.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-4921"
    },
    {
      "cve": "CVE-2023-5156",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the GNU C Library. A recent fix for CVE-2023-4806 introduced the potential for a memory leak, which may result in an application crash.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-5156"
    },
    {
      "cve": "CVE-2023-5678",
      "cwe": {
        "id": "CWE-754",
        "name": "Improper Check for Unusual or Exceptional Conditions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Generating excessively long X9.42 DH keys or checking excessively long X9.42 DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_generate_key() to generate an X9.42 DH key may experience long delays. Likewise, applications that use DH_check_pub_key(), DH_check_pub_key_ex() or EVP_PKEY_public_check() to check an X9.42 DH key or X9.42 DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. While DH_check() performs all the necessary checks (as of CVE-2023-3817), DH_check_pub_key() doesn\u0027t make any of these checks, and is therefore vulnerable for excessively large P and Q parameters. Likewise, while DH_generate_key() performs a check for an excessively large P, it doesn\u0027t check for an excessively large Q. An application that calls DH_generate_key() or DH_check_pub_key() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. DH_generate_key() and DH_check_pub_key() are also called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_pub_key_ex(), EVP_PKEY_public_check(), and EVP_PKEY_generate(). Also vulnerable are the OpenSSL pkey command line application when using the \"-pubcheck\" option, as well as the OpenSSL genpkey command line application. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-5678"
    },
    {
      "cve": "CVE-2023-5717",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A heap out-of-bounds write vulnerability in the Linux kernel\u0027s Linux Kernel Performance Events (perf) component can be exploited to achieve local privilege escalation.\r\n\r\nIf perf_read_group() is called while an event\u0027s sibling_list is smaller than its child\u0027s sibling_list, it can increment or write to memory locations outside of the allocated buffer.\r\n\r\nWe recommend upgrading past commit 32671e3799ca2e4590773fd0e63aaa4229e50c06.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-5717"
    },
    {
      "cve": "CVE-2023-5981",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found that the response times to malformed ciphertexts in RSA-PSK ClientKeyExchange differ from response times of ciphertexts with correct PKCS#1 v1.5 padding.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-5981"
    },
    {
      "cve": "CVE-2023-6121",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds read vulnerability was found in the NVMe-oF/TCP subsystem in the Linux kernel. This issue may allow a remote attacker to send a crafted TCP packet, triggering a heap-based buffer overflow that results in kmalloc data being printed and potentially leaked to the kernel ring buffer (dmesg).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-6121"
    },
    {
      "cve": "CVE-2023-6817",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s netfilter: nf_tables component can be exploited to achieve local privilege escalation.\n\nThe function nft_pipapo_walk did not skip inactive elements during set walk which could lead double deactivations of PIPAPO (Pile Packet Policies) elements, leading to use-after-free.\n\nWe recommend upgrading past commit 317eb9685095678f2c9f5a8189de698c5354316a.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-6817"
    },
    {
      "cve": "CVE-2023-6931",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A heap out-of-bounds write vulnerability in the Linux kernel\u0027s Performance Events system component can be exploited to achieve local privilege escalation.\n\nA perf_event\u0027s read_size can overflow, leading to an heap out-of-bounds increment or write in perf_read_group().\n\nWe recommend upgrading past commit 382c27f4ed28f803b1f1473ac2d8db0afc795a1b.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-6931"
    },
    {
      "cve": "CVE-2023-6932",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s ipv4: igmp component can be exploited to achieve local privilege escalation.\n\nA race condition can be exploited to cause a timer be mistakenly registered on a RCU read locked object which is freed by another thread.\n\nWe recommend upgrading past commit e2b706c691905fe78468c361aaabc719d0a496f1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-6932"
    },
    {
      "cve": "CVE-2023-23914",
      "cwe": {
        "id": "CWE-319",
        "name": "Cleartext Transmission of Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A cleartext transmission of sensitive information vulnerability exists in curl \u003cv7.88.0 that could cause HSTS functionality fail when multiple URLs are requested serially. Using its HSTS support, curl can be instructed to use HTTPS instead of usingan insecure clear-text HTTP step even when HTTP is provided in the URL. ThisHSTS mechanism would however surprisingly be ignored by subsequent transferswhen done on the same command line because the state would not be properlycarried on.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-23914"
    },
    {
      "cve": "CVE-2023-23915",
      "cwe": {
        "id": "CWE-319",
        "name": "Cleartext Transmission of Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A cleartext transmission of sensitive information vulnerability exists in curl \u003cv7.88.0 that could cause HSTS functionality to behave incorrectly when multiple URLs are requested in parallel. Using its HSTS support, curl can be instructed to use HTTPS instead of using an insecure clear-text HTTP step even when HTTP is provided in the URL. This HSTS mechanism would however surprisingly fail when multiple transfers are done in parallel as the HSTS cache file gets overwritten by the most recentlycompleted transfer. A later HTTP-only transfer to the earlier host name would then *not* get upgraded properly to HSTS.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-23915"
    },
    {
      "cve": "CVE-2023-23916",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An allocation of resources without limits or throttling vulnerability exists in curl \u003cv7.88.0 based on the \"chained\" HTTP compression algorithms, meaning that a server response can be compressed multiple times and potentially with differentalgorithms. The number of acceptable \"links\" in this \"decompression chain\" wascapped, but the cap was implemented on a per-header basis allowing a maliciousserver to insert a virtually unlimited number of compression steps simply byusing many headers. The use of such a decompression chain could result in a \"malloc bomb\", making curl end up spending enormous amounts of allocated heap memory, or trying to and returning out of memory errors.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-23916"
    },
    {
      "cve": "CVE-2023-24329",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue in the urllib.parse component of Python before 3.11.4 allows attackers to bypass blocklisting methods by supplying a URL that starts with blank characters.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-24329"
    },
    {
      "cve": "CVE-2023-25136",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "OpenSSH server (sshd) 9.1 introduced a double-free vulnerability during options.kex_algorithms handling. This is fixed in OpenSSH 9.2. The double free can be leveraged, by an unauthenticated remote attacker in the default configuration, to jump to any location in the sshd address space. One third-party report states \"remote code execution is theoretically possible.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-25136"
    },
    {
      "cve": "CVE-2023-25139",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "sprintf in the GNU C Library (glibc) 2.37 has a buffer overflow (out-of-bounds write) in some situations with a correct buffer size. This is unrelated to CWE-676. It may write beyond the bounds of the destination buffer when attempting to write a padded, thousands-separated string representation of a number, if the buffer is allocated the exact size required to represent that number as a string. For example, 1,234,567 (with padding to 13) overflows by two bytes.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-25139"
    },
    {
      "cve": "CVE-2023-26604",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "systemd before 247 does not adequately block local privilege escalation for some Sudo configurations, e.g., plausible sudoers files in which the \"systemctl status\" command may be executed. Specifically, systemd does not set LESSSECURE to 1, and thus other programs may be launched from the less program. This presents a substantial security risk when running systemctl from Sudo, because less executes as root when the terminal size is too small to show the complete systemctl output.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-26604"
    },
    {
      "cve": "CVE-2023-27371",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU libmicrohttpd before 0.9.76 allows remote DoS (Denial of Service) due to improper parsing of a multipart/form-data boundary in the postprocessor.c MHD_create_post_processor() method. This allows an attacker to remotely send a malicious HTTP POST packet that includes one or more \u0027\\0\u0027 bytes in a multipart/form-data boundary field, which - assuming a specific heap layout - will result in an out-of-bounds read and a crash in the find_boundary() function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AC:H/AV:N/A:H/C:N/I:N/PR:N/S:U/UI:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-27371"
    },
    {
      "cve": "CVE-2023-27533",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability in input validation exists in curl \u003c8.0 during communication using the TELNET protocol may allow an attacker to pass on maliciously crafted user name and \"telnet options\" during server negotiation. The lack of proper input scrubbing allows an attacker to send content or perform option negotiation without the application\u0027s intent. This vulnerability could be exploited if an application allows user input, thereby enabling attackers to execute arbitrary code on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-27533"
    },
    {
      "cve": "CVE-2023-27534",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A path traversal vulnerability exists in curl \u003c8.0.0 SFTP implementation causes the tilde (~) character to be wrongly replaced when used as a prefix in the first path element, in addition to its intended use as the first element to indicate a path relative to the user\u0027s home directory. Attackers can exploit this flaw to bypass filtering or execute arbitrary code by crafting a path like /~2/foo while accessing a server with a specific user.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-27534"
    },
    {
      "cve": "CVE-2023-27535",
      "cwe": {
        "id": "CWE-287",
        "name": "Improper Authentication"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An authentication bypass vulnerability exists in libcurl \u003c8.0.0 in the FTP connection reuse feature that can result in wrong credentials being used during subsequent transfers. Previously created connections are kept in a connection pool for reuse if they match the current setup. However, certain FTP settings such as CURLOPT_FTP_ACCOUNT, CURLOPT_FTP_ALTERNATIVE_TO_USER, CURLOPT_FTP_SSL_CCC, and CURLOPT_USE_SSL were not included in the configuration match checks, causing them to match too easily. This could lead to libcurl using the wrong credentials when performing a transfer, potentially allowing unauthorized access to sensitive information.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-27535"
    },
    {
      "cve": "CVE-2023-27536",
      "cwe": {
        "id": "CWE-287",
        "name": "Improper Authentication"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An authentication bypass vulnerability exists libcurl \u003c8.0.0 in the connection reuse feature which can reuse previously established connections with incorrect user permissions due to a failure to check for changes in the CURLOPT_GSSAPI_DELEGATION option. This vulnerability affects krb5/kerberos/negotiate/GSSAPI transfers and could potentially result in unauthorized access to sensitive information. The safest option is to not reuse connections if the CURLOPT_GSSAPI_DELEGATION option has been changed.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-27536"
    },
    {
      "cve": "CVE-2023-27537",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A double free vulnerability exists in libcurl \u003c8.0.0 when sharing HSTS data between separate \"handles\". This sharing was introduced without considerations for do this sharing across separate threads but there was no indication of this fact in the documentation. Due to missing mutexes or thread locks, two threads sharing the same HSTS data could end up doing a double-free or use-after-free.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-27537"
    },
    {
      "cve": "CVE-2023-27538",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl would reuse a previously created connection even when an SSH related option had been changed that should have prohibited reuse. libcurl keeps previously used connections in a connection pool for subsequent transfers to reuse if one of them matches the setup. However, two SSH settings were left out from the configuration match checks, making them match too easily.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-27538"
    },
    {
      "cve": "CVE-2023-28484",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libxml2 before 2.10.4, parsing of certain invalid XSD schemas can lead to a NULL pointer dereference and subsequently a segfault. This occurs in xmlSchemaFixupComplexType in xmlschemas.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-28484"
    },
    {
      "cve": "CVE-2023-28531",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ssh-add in OpenSSH before 9.3 adds smartcard keys to ssh-agent without the intended per-hop destination constraints. The earliest affected version is 8.9.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-28531"
    },
    {
      "cve": "CVE-2023-29383",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Shadow 4.13, it is possible to inject control characters into fields provided to the SUID program chfn (change finger). Although it is not possible to exploit this directly (e.g., adding a new user fails because \\n is in the block list), it is possible to misrepresent the /etc/passwd file when viewed. Use of \\r manipulations and Unicode characters to work around blocking of the : character make it possible to give the impression that a new user has been added. In other words, an adversary may be able to convince a system administrator to take the system offline (an indirect, social-engineered denial of service) by demonstrating that \"cat /etc/passwd\" shows a rogue user account.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-29383"
    },
    {
      "cve": "CVE-2023-29469",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.10.4. When hashing empty dict strings in a crafted XML document, xmlDictComputeFastKey in dict.c can produce non-deterministic values, leading to various logic and memory errors, such as a double free. This behavior occurs because there is an attempt to use the first byte of an empty string, and any value is possible (not solely the \u0027\\0\u0027 value).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-29469"
    },
    {
      "cve": "CVE-2023-29491",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ncurses before 6.4 20230408, when used by a setuid application, allows local users to trigger security-relevant memory corruption via malformed data in a terminfo database file that is found in $HOME/.terminfo or reached via the TERMINFO or TERM environment variable.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-29491"
    },
    {
      "cve": "CVE-2023-29499",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in GLib. GVariant deserialization fails to validate that the input conforms to the expected format, leading to denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-29499"
    },
    {
      "cve": "CVE-2023-31085",
      "cwe": {
        "id": "CWE-369",
        "name": "Divide By Zero"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in drivers/mtd/ubi/cdev.c in the Linux kernel 6.2. There is a divide-by-zero error in do_div(sz,mtd-\u003eerasesize), used indirectly by ctrl_cdev_ioctl, when mtd-\u003eerasesize is 0.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-31085"
    },
    {
      "cve": "CVE-2023-32611",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in GLib. GVariant deserialization is vulnerable to a slowdown issue where a crafted GVariant can cause excessive processing, leading to denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-32611"
    },
    {
      "cve": "CVE-2023-32636",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in glib, where the gvariant deserialization code is vulnerable to a denial of service introduced by additional input validation added to resolve CVE-2023-29499. The offset table validation may be very slow. This bug does not affect any released version of glib but does affect glib distributors who followed the guidance of glib developers to backport the initial fix for CVE-2023-29499.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-32636"
    },
    {
      "cve": "CVE-2023-32643",
      "cwe": {
        "id": "CWE-122",
        "name": "Heap-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in GLib. The GVariant deserialization code is vulnerable to a heap buffer overflow introduced by the fix for CVE-2023-32665. This bug does not affect any released version of GLib, but does affect GLib distributors who followed the guidance of GLib developers to backport the initial fix for CVE-2023-32665.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-32643"
    },
    {
      "cve": "CVE-2023-32665",
      "cwe": {
        "id": "CWE-502",
        "name": "Deserialization of Untrusted Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in GLib. GVariant deserialization is vulnerable to an exponential blowup issue where a crafted GVariant can cause excessive processing, leading to denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-32665"
    },
    {
      "cve": "CVE-2023-34319",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The fix for XSA-423 added logic to Linux\u0027es netback driver to deal with\na frontend splitting a packet in a way such that not all of the headers\nwould come in one piece.  Unfortunately the logic introduced there\ndidn\u0027t account for the extreme case of the entire packet being split\ninto as many pieces as permitted by the protocol, yet still being\nsmaller than the area that\u0027s specially dealt with to keep all (possible)\nheaders together.  Such an unusual packet would therefore trigger a\nbuffer overrun in the driver.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-34319"
    },
    {
      "cve": "CVE-2023-34969",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "D-Bus before 1.15.6 sometimes allows unprivileged users to crash dbus-daemon. If a privileged user with control over the dbus-daemon is using the org.freedesktop.DBus.Monitoring interface to monitor message bus traffic, then an unprivileged user with the ability to connect to the same dbus-daemon can cause a dbus-daemon crash under some circumstances via an unreplyable message. When done on the well-known system bus, this is a denial-of-service vulnerability. The fixed versions are 1.12.28, 1.14.8, and 1.15.6.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-34969"
    },
    {
      "cve": "CVE-2023-35001",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Linux Kernel nftables Out-Of-Bounds Read/Write Vulnerability; nft_byteorder poorly handled vm register contents when CAP_NET_ADMIN is in any user or network namespace",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-35001"
    },
    {
      "cve": "CVE-2023-35945",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Envoy is a cloud-native high-performance edge/middle/service proxy. Envoy\u2019s HTTP/2 codec may leak a header map and bookkeeping structures upon receiving `RST_STREAM` immediately followed by the `GOAWAY` frames from an upstream server. In nghttp2, cleanup of pending requests due to receipt of the `GOAWAY` frame skips de-allocation of the bookkeeping structure and pending compressed header. The error return [code path] is taken if connection is already marked for not sending more requests due to `GOAWAY` frame. The clean-up code is right after the return statement, causing memory leak. Denial of service through memory exhaustion. This vulnerability was patched in versions(s) 1.26.3, 1.25.8, 1.24.9, 1.23.11.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-35945"
    },
    {
      "cve": "CVE-2023-38408",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The PKCS#11 feature in ssh-agent in OpenSSH before 9.3p2 has an insufficiently trustworthy search path, leading to remote code execution if an agent is forwarded to an attacker-controlled system. (Code in /usr/lib is not necessarily safe for loading into ssh-agent.) NOTE: this issue exists because of an incomplete fix for CVE-2016-10009.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.7,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:R/S:C/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-38408"
    },
    {
      "cve": "CVE-2023-38545",
      "cwe": {
        "id": "CWE-122",
        "name": "Heap-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "This flaw makes curl overflow a heap based buffer in the SOCKS5 proxy handshake.\r\n\r\nWhen curl is asked to pass along the hostname to the SOCKS5 proxy to allow that to resolve the address instead of it getting done by curl itself, the maximum length that hostname can be is 255 bytes.\r\n\r\nIf the hostname is detected to be longer than 255 bytes, curl switches to local name resolving and instead passes on the resolved address only to the proxy. Due to a bug, the local variable that means \"let the host resolve the name\" could get the wrong value during a slow SOCKS5 handshake, and contrary to the intention, copy the too long hostname to the target buffer instead of copying just the resolved address there.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-38545"
    },
    {
      "cve": "CVE-2023-38546",
      "cwe": {
        "id": "CWE-73",
        "name": "External Control of File Name or Path"
      },
      "notes": [
        {
          "category": "summary",
          "text": "This flaw allows an attacker to insert cookies at will into a running program\r\nusing libcurl, if the specific series of conditions are met.\r\n\r\nlibcurl performs transfers. In its API, an application creates \"easy handles\"\r\nthat are the individual handles for single transfers.\r\n\r\nlibcurl provides a function call that duplicates en easy handle called\r\n[curl_easy_duphandle](https://curl.se/libcurl/c/curl_easy_duphandle.html).\r\n\r\nIf a transfer has cookies enabled when the handle is duplicated, the\r\ncookie-enable state is also cloned - but without cloning the actual\r\ncookies. If the source handle did not read any cookies from a specific file on\r\ndisk, the cloned version of the handle would instead store the file name as\r\n`none` (using the four ASCII letters, no quotes).\r\n\r\nSubsequent use of the cloned handle that does not explicitly set a source to\r\nload cookies from would then inadvertently load cookies from a file named\r\n`none` - if such a file exists and is readable in the current directory of the\r\nprogram using libcurl. And if using the correct file format of course.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-38546"
    },
    {
      "cve": "CVE-2023-39128",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU gdb (GDB) 13.0.50.20220805-git was discovered to contain a stack overflow via the function ada_decode at /gdb/ada-lang.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-39128"
    },
    {
      "cve": "CVE-2023-39189",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Netfilter subsystem in the Linux kernel. The nfnl_osf_add_callback function did not validate the user mode controlled opt_num field. This flaw allows a local privileged (CAP_NET_ADMIN) attacker to trigger an out-of-bounds read, leading to a crash or information disclosure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-39189"
    },
    {
      "cve": "CVE-2023-39192",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Netfilter subsystem in the Linux kernel. The xt_u32 module did not validate the fields in the xt_u32 structure. This flaw allows a local privileged attacker to trigger an out-of-bounds read by setting the size fields with a value beyond the array boundaries, leading to a crash or information disclosure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:C/C:H/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-39192"
    },
    {
      "cve": "CVE-2023-39193",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Netfilter subsystem in the Linux kernel. The sctp_mt_check did not validate the flag_count field. This flaw allows a local privileged (CAP_NET_ADMIN) attacker to trigger an out-of-bounds read, leading to a crash or information disclosure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-39193"
    },
    {
      "cve": "CVE-2023-39194",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the XFRM subsystem in the Linux kernel. The specific flaw exists within the processing of state filters, which can result in a read past the end of an allocated buffer. This flaw allows a local privileged (CAP_NET_ADMIN) attacker to trigger an out-of-bounds read, potentially leading to an information disclosure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.2,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:C/C:L/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-39194"
    },
    {
      "cve": "CVE-2023-39615",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Xmlsoft Libxml2 v2.11.0 was discovered to contain an out-of-bounds read via the xmlSAX2StartElement() function at /libxml2/SAX2.c. This vulnerability allows attackers to cause a Denial of Service (DoS) via supplying a crafted XML file. NOTE: the vendor\u0027s position is that the product does not support the legacy SAX1 interface with custom callbacks; there is a crash even without crafted input.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-39615"
    },
    {
      "cve": "CVE-2023-40283",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in l2cap_sock_release in net/bluetooth/l2cap_sock.c in the Linux kernel before 6.4.10. There is a use-after-free because the children of an sk are mishandled.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-40283"
    },
    {
      "cve": "CVE-2023-42754",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer dereference flaw was found in the Linux kernel ipv4 stack. The socket buffer (skb) was assumed to be associated with a device before calling __ip_options_compile, which is not always the case if the skb is re-routed by ipvs. This issue may allow a local user with CAP_NET_ADMIN privileges to crash the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-42754"
    },
    {
      "cve": "CVE-2023-42755",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the IPv4 Resource Reservation Protocol (RSVP) classifier in the Linux kernel. The xprt pointer may go beyond the linear part of the skb, leading to an out-of-bounds read in the `rsvp_classify` function. This issue may allow a local user to crash the system and cause a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-42755"
    },
    {
      "cve": "CVE-2023-44487",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The HTTP/2 protocol allows a denial of service (server resource consumption) because request cancellation can reset many streams quickly, as exploited in the wild in August through October 2023.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-44487"
    },
    {
      "cve": "CVE-2023-45322",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libxml2 through 2.11.5 has a use-after-free that can only occur after a certain memory allocation fails. This occurs in xmlUnlinkNode in tree.c. NOTE: the vendor\u0027s position is \"I don\u0027t think these issues are critical enough to warrant a CVE ID ... because an attacker typically can\u0027t control when memory allocations fail.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-45322"
    },
    {
      "cve": "CVE-2023-45853",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "MiniZip in zlib through 1.3 has an integer overflow and resultant heap-based buffer overflow in zipOpenNewFileInZip4_64 via a long filename, comment, or extra field. NOTE: MiniZip is not a supported part of the zlib product.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-45853"
    },
    {
      "cve": "CVE-2023-45871",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in drivers/net/ethernet/intel/igb/igb_main.c in the IGB driver in the Linux kernel before 6.5.3. A buffer size may not be adequate for frames larger than the MTU.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-45871"
    },
    {
      "cve": "CVE-2023-45898",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The Linux kernel before 6.5.4 has an es1 use-after-free in fs/ext4/extents_status.c, related to ext4_es_insert_extent.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-45898"
    },
    {
      "cve": "CVE-2023-45918",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ncurses 6.4-20230610 has a NULL pointer dereference in tgetstr in tinfo/lib_termcap.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-45918"
    },
    {
      "cve": "CVE-2023-46218",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "This flaw allows a malicious HTTP server to set \"super cookies\" in curl that are then passed back to more origins than what is otherwise allowed or possible. This allows a site to set cookies that then would get sent to different and unrelated sites and domains. It could do this by exploiting a mixed case flaw in curl\u0027s function that verifies a given cookie domain against the Public Suffix List (PSL). For example a cookie could be set with `domain=co.UK` when the URL used a lower case hostname `curl.co.uk`, even though `co.uk` is listed as a PSL domain.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-46218"
    },
    {
      "cve": "CVE-2023-46219",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When saving HSTS data to an excessively long file name, curl could end up removing all contents, making subsequent requests using that file unaware of the HSTS status they should otherwise use.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-46219"
    },
    {
      "cve": "CVE-2023-46862",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel through 6.5.9. During a race with SQ thread exit, an io_uring/fdinfo.c io_uring_show_fdinfo NULL pointer dereference can occur.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-46862"
    },
    {
      "cve": "CVE-2023-48795",
      "cwe": {
        "id": "CWE-222",
        "name": "Truncation of Security-relevant Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The SSH transport protocol with certain OpenSSH extensions, found in OpenSSH before 9.6 and other products, allows remote attackers to bypass integrity checks such that some packets are omitted (from the extension negotiation message), and a client and server may consequently end up with a connection for which some security features have been downgraded or disabled, aka a Terrapin attack. This occurs because the SSH Binary Packet Protocol (BPP), implemented by these extensions, mishandles the handshake phase and mishandles use of sequence numbers. For example, there is an effective attack against SSH\u0027s use of ChaCha20-Poly1305 (and CBC with Encrypt-then-MAC). The bypass occurs in chacha20-poly1305@openssh.com and (if CBC is used) the -etm@openssh.com MAC algorithms. This also affects Maverick Synergy Java SSH API before 3.1.0-SNAPSHOT, Dropbear through 2022.83, Ssh before 5.1.1 in Erlang/OTP, PuTTY before 0.80, AsyncSSH before 2.14.2, golang.org/x/crypto before 0.17.0, libssh before 0.10.6, libssh2 through 1.11.0, Thorn Tech SFTP Gateway before 3.4.6, Tera Term before 5.1, Paramiko before 3.4.0, jsch before 0.2.15, SFTPGo before 2.5.6, Netgate pfSense Plus through 23.09.1, Netgate pfSense CE through 2.7.2, HPN-SSH through 18.2.0, ProFTPD before 1.3.8b (and before1.3.9rc2), ORYX CycloneSSH before 2.3.4, NetSarang XShell 7 before Build 0144, CrushFTP before 10.6.0, ConnectBot SSH library before 2.2.22, Apache MINA sshd through 2.11.0, sshj through 0.37.0, TinySSH through 20230101, trilead-ssh2 6401, the net-ssh gem 7.2.0 for Ruby, the mscdex ssh2 module before 1.15.0 for Node.js, the thrussh library before 0.35.1 for Rust, and the Russh crate before 0.40.2 for Rust; and there could be effects on Bitvise SSH through 9.31.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-48795"
    },
    {
      "cve": "CVE-2023-52425",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libexpat through 2.5.0 allows a denial of service (resource consumption) because many full reparsings are required in the case of a large token for which multiple buffer fills are needed.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-52425"
    },
    {
      "cve": "CVE-2023-52426",
      "cwe": {
        "id": "CWE-776",
        "name": "Improper Restriction of Recursive Entity References in DTDs (\u0027XML Entity Expansion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libexpat through 2.5.0 allows recursive XML Entity Expansion if XML_DTD is undefined at compile time.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-52426"
    },
    {
      "cve": "CVE-2024-0584",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free issue was found in igmp_start_timer in net/ipv4/igmp.c in the network sub-component in the Linux Kernel. This flaw allows a local user to observe a refcnt use-after-free issue when receiving an igmp query packet, leading to a kernel information leak.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-0584"
    },
    {
      "cve": "CVE-2024-2004",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When a protocol selection parameter option disables all protocols without adding any then the default set of protocols would remain in the allowed set due to an error in the logic for removing protocols. The below command would perform a request to curl.se with a plaintext protocol which has been explicitly disabled.      curl --proto -all,-http http://curl.se  The flaw is only present if the set of selected protocols disables the entire set of available protocols, in itself a command with no practical use and therefore unlikely to be encountered in real situations. The curl security team has thus assessed this to be low severity bug.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-2004"
    },
    {
      "cve": "CVE-2024-2236",
      "cwe": {
        "id": "CWE-208",
        "name": "Observable Timing Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A timing-based side-channel flaw was found in libgcrypt\u0027s RSA implementation. This issue may allow a remote attacker to initiate a Bleichenbacher-style attack, which can lead to the decryption of RSA ciphertexts.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-2236"
    },
    {
      "cve": "CVE-2024-2379",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl skips the certificate verification for a QUIC connection under certain conditions, when built to use wolfSSL. If told to use an unknown/bad cipher or curve, the error path accidentally skips the verification and returns OK, thus ignoring any certificate problems.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-2379"
    },
    {
      "cve": "CVE-2024-2398",
      "cwe": {
        "id": "CWE-772",
        "name": "Missing Release of Resource after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When an application tells libcurl it wants to allow HTTP/2 server push, and the amount of received headers for the push surpasses the maximum allowed limit (1000), libcurl aborts the server push. When aborting, libcurl inadvertently does not free all the previously allocated headers and instead leaks the memory.  Further, this error condition fails silently and is therefore not easily detected by an application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-2398"
    },
    {
      "cve": "CVE-2024-2466",
      "cwe": {
        "id": "CWE-297",
        "name": "Improper Validation of Certificate with Host Mismatch"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl did not check the server certificate of TLS connections done to a host specified as an IP address, when built to use mbedTLS.  libcurl would wrongly avoid using the set hostname function when the specified hostname was given as an IP address, therefore completely skipping the certificate check. This affects all uses of TLS protocols (HTTPS, FTPS, IMAPS, POPS3, SMTPS, etc).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-2466"
    },
    {
      "cve": "CVE-2024-2511",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Some non-default TLS server configurations can cause unbounded memory growth when processing TLSv1.3 sessions\r\nImpact summary: An attacker may exploit certain server configurations to trigger unbounded memory growth that would lead to a Denial of Service This problem can occur in TLSv1.3 if the non-default SSL_OP_NO_TICKET option is being used (but not if early_data support is also configured and the default anti-replay protection is in use). In this case, under certain conditions, the session cache can get into an incorrect state and it will fail to flush properly as it fills. The session cache will continue to grow in an unbounded manner. A malicious client could deliberately create the scenario for this failure to force a Denial of Service. It may also happen by accident in normal operation. This issue only affects TLS servers supporting TLSv1.3. It does not affect TLS clients. The FIPS modules in 3.2, 3.1 and 3.0 are not affected by this issue. OpenSSL 1.0.2 is also not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-2511"
    },
    {
      "cve": "CVE-2024-2961",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The iconv() function in the GNU C Library versions 2.39 and older may overflow the output buffer passed to it by up to 4 bytes when converting strings to the ISO-2022-CN-EXT character set, which may be used to crash an application or overwrite a neighbouring variable.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-2961"
    },
    {
      "cve": "CVE-2024-5535",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Calling the OpenSSL API function SSL_select_next_proto with an empty supported client protocols buffer may cause a crash or memory contents to be sent to the peer. Impact summary: A buffer overread can have a range of potential consequences such as unexpected application beahviour or a crash. In particular this issue could result in up to 255 bytes of arbitrary private data from memory being sent to the peer leading to a loss of confidentiality. However, only applications that directly call the SSL_select_next_proto function with a 0 length list of supported client protocols are affected by this issue. This would normally never be a valid scenario and is typically not under attacker control but may occur by accident in the case of a configuration or programming error in the calling application. The OpenSSL API function SSL_select_next_proto is typically used by TLS applications that support ALPN (Application Layer Protocol Negotiation) or NPN (Next Protocol Negotiation). NPN is older, was never standardised and is deprecated in favour of ALPN. We believe that ALPN is significantly more widely deployed than NPN. The SSL_select_next_proto function accepts a list of protocols from the server and a list of protocols from the client and returns the first protocol that appears in the server list that also appears in the client list. In the case of no overlap between the two lists it returns the first item in the client list. In either case it will signal whether an overlap between the two lists was found. In the case where SSL_select_next_proto is called with a zero length client list it fails to notice this condition and returns the memory immediately following the client list pointer (and reports that there was no overlap in the lists). This function is typically called from a server side application callback for ALPN or a client side application callback for NPN. In the case of ALPN the list of protocols supplied by the client is guaranteed by libssl to never be zero in length. The list of server protocols comes from the application and should never normally be expected to be of zero length. In this case if the SSL_select_next_proto function has been called as expected (with the list supplied by the client passed in the client/client_len parameters), then the application will not be vulnerable to this issue. If the application has accidentally been configured with a zero length server list, and has accidentally passed that zero length server list in the client/client_len parameters, and has additionally failed to correctly handle a \"no overlap\" response (which would normally result in a handshake failure in ALPN) then it will be vulnerable to this problem. In the case of NPN, the protocol permits the client to opportunistically select a protocol when there is no overlap. OpenSSL returns the first client protocol in the no overlap case in support of this. The list of client protocols comes from the application and should never normally be expected to be of zero length. However if the SSL_select_next_proto function is accidentally called with a client_len of 0 then an invalid memory pointer will be returned instead. If the application uses this output as the opportunistic protocol then the loss of confidentiality will occur. This issue has been assessed as Low severity because applications are most likely to be vulnerable if they are using NPN instead of ALPN - but NPN is not widely used. It also requires an application configuration or programming error. Finally, this issue would not typically be under attacker control making active exploitation unlikely. The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. Due to the low severity of this issue we are not issuing new releases of OpenSSL at this time. The fix will be included in the next releases when they become available.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-5535"
    },
    {
      "cve": "CVE-2024-5742",
      "cwe": {
        "id": "CWE-377",
        "name": "Insecure Temporary File"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in GNU Nano that allows a possible privilege escalation through an insecure temporary file. If Nano is killed while editing, a file it saves to an emergency file with the permissions of the running user provides a window of opportunity for attackers to escalate privileges through a malicious symlink.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:H/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-5742"
    },
    {
      "cve": "CVE-2024-6409",
      "cwe": {
        "id": "CWE-364",
        "name": "Signal Handler Race Condition"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A race condition vulnerability was discovered in how signals are handled by OpenSSH\u0027s server (sshd). If a remote attacker does not authenticate within a set time period, then sshd\u0027s SIGALRM handler is called asynchronously. However, this signal handler calls various functions that are not async-signal-safe, for example, syslog(). As a consequence of a successful attack, in the worst case scenario, an attacker may be able to perform a remote code execution (RCE) as an unprivileged user running the sshd server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:L/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-6409"
    },
    {
      "cve": "CVE-2024-7264",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl\u0027s ASN1 parser code has the `GTime2str()` function, used for parsing an ASN.1 Generalized Time field. If given an syntactically incorrect field, the parser might end up using -1 for the length of the *time fraction*, leading to a `strlen()` getting performed on a pointer to a heap buffer area that is not (purposely) null terminated. This flaw most likely leads to a crash, but can also lead to heap contents getting returned to the application when [CURLINFO_CERTINFO](https://curl.se/libcurl/c/CURLINFO_CERTINFO.html) is used.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-7264"
    },
    {
      "cve": "CVE-2024-8096",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl is told to use the Certificate Status Request TLS extension, often referred to as OCSP stapling, to verify that the server certificate is valid, it might fail to detect some OCSP problems and instead wrongly consider the response as fine. If the returned status reports another error than \u0027revoked\u0027 (like for example \u0027unauthorized\u0027) it is not treated as a bad certficate.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-8096"
    },
    {
      "cve": "CVE-2024-9143",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Use of the low-level GF(2m) elliptic curve APIs with untrusted explicit values for the field polynomial can lead to out-of-bounds memory reads or writes. Impact summary: Out of bound memory writes can lead to an application crash or even a possibility of a remote code execution, however, in all the protocols involving Elliptic Curve Cryptography that we\u0027re aware of, either only \"named curves\" are supported, or, if explicit curve parameters are supported, they specify an X9.62 encoding of binary (GF(2m)) curves that can\u0027t represent problematic input values. Thus the likelihood of existence of a vulnerable application is low. In particular, the X9.62 encoding is used for ECC keys in X.509 certificates, so problematic inputs cannot occur in the context of processing X.509 certificates. Any problematic use-cases would have to be using an \"exotic\" curve encoding. The affected APIs include: EC_GROUP_new_curve_GF2m(), EC_GROUP_new_from_params(), and various supporting BN_GF2m_*() functions. Applications working with \"exotic\" explicit binary (GF(2m)) curve parameters, that make it possible to represent invalid field polynomials with a zero constant term, via the above or similar APIs, may terminate abruptly as a result of reading or writing outside of array bounds. Remote code execution cannot easily be ruled out. The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-9143"
    },
    {
      "cve": "CVE-2024-28085",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "wall in util-linux through 2.40, often installed with setgid tty permissions, allows escape sequences to be sent to other users\u0027 terminals through argv. (Specifically, escape sequences received from stdin are blocked, but escape sequences received from argv are not blocked.) There may be plausible scenarios where this leads to account takeover.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.0"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-28085"
    },
    {
      "cve": "CVE-2024-28182",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nghttp2 is an implementation of the Hypertext Transfer Protocol version 2 in C. The nghttp2 library prior to version 1.61.0 keeps reading the unbounded number of HTTP/2 CONTINUATION frames even after a stream is reset to keep HPACK context in sync.  This causes excessive CPU usage to decode HPACK stream. nghttp2 v1.61.0 mitigates this vulnerability by limiting the number of CONTINUATION frames it accepts per stream. There is no workaround for this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-28182"
    },
    {
      "cve": "CVE-2024-28757",
      "cwe": {
        "id": "CWE-776",
        "name": "Improper Restriction of Recursive Entity References in DTDs (\u0027XML Entity Expansion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libexpat through 2.6.1 allows an XML Entity Expansion attack when there is isolated use of external parsers (created via XML_ExternalEntityParserCreate).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-28757"
    },
    {
      "cve": "CVE-2024-28834",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in GnuTLS. The Minerva attack is a cryptographic vulnerability that exploits deterministic behavior in systems like GnuTLS, leading to side-channel leaks. In specific scenarios, such as when using the GNUTLS_PRIVKEY_FLAG_REPRODUCIBLE flag, it can result in a noticeable step in nonce size from 513 to 512 bits, exposing a potential timing side-channel.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-28834"
    },
    {
      "cve": "CVE-2024-28835",
      "cwe": {
        "id": "CWE-248",
        "name": "Uncaught Exception"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw has been discovered in GnuTLS where an application crash can be induced when attempting to verify a specially crafted .pem bundle using the \"certtool --verify-chain\" command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.0,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-28835"
    },
    {
      "cve": "CVE-2024-33599",
      "cwe": {
        "id": "CWE-121",
        "name": "Stack-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nscd: Stack-based buffer overflow in netgroup cache\r\n\r\nIf the Name Service Cache Daemon\u0027s (nscd) fixed size cache is exhausted\r\nby client requests then a subsequent client request for netgroup data\r\nmay result in a stack-based buffer overflow.  This flaw was introduced\r\nin glibc 2.15 when the cache was added to nscd.\r\n\r\nThis vulnerability is only present in the nscd binary.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.6,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-33599"
    },
    {
      "cve": "CVE-2024-33600",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nscd: Null pointer crashes after notfound response\r\n\r\nIf the Name Service Cache Daemon\u0027s (nscd) cache fails to add a not-found\r\nnetgroup response to the cache, the client request can result in a null\r\npointer dereference.  This flaw was introduced in glibc 2.15 when the\r\ncache was added to nscd.\r\n\r\nThis vulnerability is only present in the nscd binary.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-33600"
    },
    {
      "cve": "CVE-2024-33601",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nscd: netgroup cache may terminate daemon on memory allocation failure\r\n\r\nThe Name Service Cache Daemon\u0027s (nscd) netgroup cache uses xmalloc or\r\nxrealloc and these functions may terminate the process due to a memory\r\nallocation failure resulting in a denial of service to the clients.  The\r\nflaw was introduced in glibc 2.15 when the cache was added to nscd.\r\n\r\nThis vulnerability is only present in the nscd binary.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.0,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-33601"
    },
    {
      "cve": "CVE-2024-33602",
      "cwe": {
        "id": "CWE-466",
        "name": "Return of Pointer Value Outside of Expected Range"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nscd: netgroup cache assumes NSS callback uses in-buffer strings\r\n\r\nThe Name Service Cache Daemon\u0027s (nscd) netgroup cache can corrupt memory\r\nwhen the NSS callback does not store all strings in the provided buffer.\r\nThe flaw was introduced in glibc 2.15 when the cache was added to nscd.\r\n\r\nThis vulnerability is only present in the nscd binary.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.0,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-33602"
    },
    {
      "cve": "CVE-2024-34459",
      "cwe": {
        "id": "CWE-126",
        "name": "Buffer Over-read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in xmllint (from libxml2) before 2.11.8 and 2.12.x before 2.12.7. Formatting error messages with xmllint --htmlout can result in a buffer over-read in xmlHTMLPrintFileContext in xmllint.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-34459"
    },
    {
      "cve": "CVE-2024-37370",
      "cwe": {
        "id": "CWE-130",
        "name": "Improper Handling of Length Parameter Inconsistency"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In MIT Kerberos 5 (aka krb5) before 1.21.3, an attacker can modify the plaintext Extra Count field of a confidential GSS krb5 wrap token, causing the unwrapped token to appear truncated to the application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-37370"
    },
    {
      "cve": "CVE-2024-37371",
      "cwe": {
        "id": "CWE-130",
        "name": "Improper Handling of Length Parameter Inconsistency"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In MIT Kerberos 5 (aka krb5) before 1.21.3, an attacker can cause invalid memory reads during GSS message token handling by sending message tokens with invalid length fields.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-37371"
    },
    {
      "cve": "CVE-2024-45490",
      "cwe": {
        "id": "CWE-131",
        "name": "Incorrect Calculation of Buffer Size"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libexpat before 2.6.3. xmlparse.c does not reject a negative length for XML_ParseBuffer.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-45490"
    },
    {
      "cve": "CVE-2024-45491",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libexpat before 2.6.3. dtdCopy in xmlparse.c can have an integer overflow for nDefaultAtts on 32-bit platforms (where UINT_MAX equals SIZE_MAX).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.3,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-45491"
    },
    {
      "cve": "CVE-2024-45492",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libexpat before 2.6.3. nextScaffoldPart in xmlparse.c can have an integer overflow for m_groupSize on 32-bit platforms (where UINT_MAX equals SIZE_MAX).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.3,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-45492"
    }
  ]
}

{
  "document": {
    "acknowledgments": [
      {
        "organization": "Siemens ProductCERT",
        "summary": "reporting these vulnerabilities to CISA."
      }
    ],
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Disclosure is not limited",
      "tlp": {
        "label": "WHITE",
        "url": "https://us-cert.cisa.gov/tlp/"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the firmware version V3.1 for the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP (incl. SIPLUS variant).\n\nThese GNU/Linux vulnerabilities have been externally identified. Siemens is preparing fix versions and recommends specific countermeasures for products where fixes are not, or not yet available.\n\nNote: This SSA advises vulnerabilities for firmware version V3.1 only; for versions \u003c V3.1 refer to Siemens Security Bulletin SSB-439005 (\nhttps://cert-portal.siemens.com/productcert/html/ssb-439005.html).",
        "title": "Summary"
      },
      {
        "category": "general",
        "text": "As a general security measure, Siemens strongly recommends to protect network access to devices with appropriate mechanisms. In order to operate the devices in a protected IT environment, Siemens recommends to configure the environment according to Siemens\u0027 operational guidelines for Industrial Security (Download: \nhttps://www.siemens.com/cert/operational-guidelines-industrial-security), and to follow the recommendations in the product manuals.\nAdditional information on Industrial Security by Siemens can be found at: https://www.siemens.com/industrialsecurity",
        "title": "General Recommendations"
      },
      {
        "category": "general",
        "text": "For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories",
        "title": "Additional Resources"
      },
      {
        "category": "legal_disclaimer",
        "text": "The use of Siemens Security Advisories is subject to the terms and conditions listed on: https://www.siemens.com/productcert/terms-of-use.",
        "title": "Terms of Use"
      },
      {
        "category": "legal_disclaimer",
        "text": "All information products included in https://us-cert.cisa.gov/ics are provided \"as is\" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see https://us-cert.cisa.gov/tlp/.",
        "title": "Legal Notice"
      },
      {
        "category": "other",
        "text": "This CISA CSAF advisory was converted from Siemens ProductCERT\u0027s CSAF advisory.",
        "title": "Advisory Conversion Disclaimer"
      },
      {
        "category": "other",
        "text": "Multiple",
        "title": "Critical infrastructure sectors"
      },
      {
        "category": "other",
        "text": "Worldwide",
        "title": "Countries/areas deployed"
      },
      {
        "category": "other",
        "text": "Germany",
        "title": "Company headquarters location"
      },
      {
        "category": "general",
        "text": "CISA recommends users take defensive measures to minimize the exploitation risk of this vulnerability.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Minimize network exposure for all control system devices and/or systems, and ensure they are not accessible from the internet.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Locate control system networks and remote devices behind firewalls and isolate them from business networks.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "When remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most recent version available. Also recognize VPN is only as secure as its connected devices.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "CISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets. Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.",
        "title": "Recommended Practices"
      },
      {
        "category": "general",
        "text": "Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.",
        "title": "Recommended Practices"
      }
    ],
    "publisher": {
      "category": "other",
      "contact_details": "central@cisa.dhs.gov",
      "name": "CISA",
      "namespace": "https://www.cisa.gov/"
    },
    "references": [
      {
        "category": "self",
        "summary": "SSA-398330: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP V3.1 - CSAF Version",
        "url": "https://cert-portal.siemens.com/productcert/csaf/ssa-398330.json"
      },
      {
        "category": "self",
        "summary": "SSA-398330: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP V3.1 - HTML Version",
        "url": "https://cert-portal.siemens.com/productcert/html/ssa-398330.html"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-23-348-10 JSON",
        "url": "https://raw.githubusercontent.com/cisagov/CSAF/develop/csaf_files/OT/white/2023/icsa-23-348-10.json"
      },
      {
        "category": "self",
        "summary": "ICS Advisory ICSA-23-348-10 - Web Version",
        "url": "https://www.cisa.gov/news-events/ics-advisories/icsa-23-348-10"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/alerts/ICS-ALERT-10-301-01"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/resources-tools/resources/ics-recommended-practices"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/topics/industrial-control-systems"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/sites/default/files/publications/Cybersecurity_Best_Practices_for_Industrial_Control_Systems.pdf"
      },
      {
        "category": "external",
        "summary": "Recommended Practices",
        "url": "https://www.cisa.gov/uscert/ics/tips/ICS-TIP-12-146-01B"
      }
    ],
    "title": "Siemens SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP V3.1",
    "tracking": {
      "current_release_date": "2024-11-12T00:00:00.000000Z",
      "generator": {
        "engine": {
          "name": "CISA CSAF Generator",
          "version": "1.0.0"
        }
      },
      "id": "ICSA-23-348-10",
      "initial_release_date": "2023-12-12T00:00:00.000000Z",
      "revision_history": [
        {
          "date": "2023-12-12T00:00:00.000000Z",
          "legacy_version": "1.0",
          "number": "1",
          "summary": "Publication Date"
        },
        {
          "date": "2024-01-09T00:00:00.000000Z",
          "legacy_version": "1.1",
          "number": "2",
          "summary": "Added CVE-2021-44879, CVE-2023-46218, CVE-2023-46219, and CVE-2023-48795"
        },
        {
          "date": "2024-02-13T00:00:00.000000Z",
          "legacy_version": "1.2",
          "number": "3",
          "summary": "Added CVE-2023-45898, CVE-2023-46862, CVE-2023-6121, CVE-2023-6817, CVE-2023-6931, CVE-2023-6932, CVE-2024-0584"
        },
        {
          "date": "2024-03-12T00:00:00.000000Z",
          "legacy_version": "1.3",
          "number": "4",
          "summary": "Added CVE-2023-52425, CVE-2023-52426, CVE-2023-45918"
        },
        {
          "date": "2024-04-09T00:00:00.000000Z",
          "legacy_version": "1.4",
          "number": "5",
          "summary": "Added CVE-2024-28757"
        },
        {
          "date": "2024-05-14T00:00:00.000000Z",
          "legacy_version": "1.5",
          "number": "6",
          "summary": "Added CVE-2024-2004, CVE-2024-2379, CVE-2024-2398, CVE-2024-2466, CVE-2024-2511, CVE-2024-28085, CVE-2024-28182, CVE-2024-28834, CVE-2024-28835"
        },
        {
          "date": "2024-06-11T00:00:00.000000Z",
          "legacy_version": "1.6",
          "number": "7",
          "summary": "Added CVE-2024-2961, CVE-2024-33599, CVE-2024-33600, CVE-2024-33601, CVE-2024-33602, CVE-2024-34459"
        },
        {
          "date": "2024-07-09T00:00:00.000000Z",
          "legacy_version": "1.7",
          "number": "8",
          "summary": "Added CVE-2024-5535, CVE-2024-5742"
        },
        {
          "date": "2024-08-13T00:00:00.000000Z",
          "legacy_version": "1.8",
          "number": "9",
          "summary": "Added CVE-2017-15422, CVE-2024-7264, CVE-2024-37370, CVE-2024-37371"
        },
        {
          "date": "2024-10-08T00:00:00.000000Z",
          "legacy_version": "1.9",
          "number": "10",
          "summary": "Added CVE-2024-6409, CVE-2024-8096, CVE-2024-45490, CVE-2024-45491, CVE-2024-45492"
        },
        {
          "date": "2024-11-12T00:00:00.000000Z",
          "legacy_version": "2.0",
          "number": "11",
          "summary": "Added CVE-2024-2236, CVE-2024-9143"
        }
      ],
      "status": "final",
      "version": "11"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "vers:all/\u003e=V3.1.0",
                "product": {
                  "name": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)",
                  "product_id": "CSAFPID-0001",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6ES7518-4AX00-1AB0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "vers:all/\u003e=V3.1.0",
                "product": {
                  "name": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)",
                  "product_id": "CSAFPID-0002",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6ES7518-4AX00-1AC0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "vers:all/\u003e=V3.1.0",
                "product": {
                  "name": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)",
                  "product_id": "CSAFPID-0003",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6ES7518-4FX00-1AB0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "vers:all/\u003e=V3.1.0",
                "product": {
                  "name": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)",
                  "product_id": "CSAFPID-0004",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6ES7518-4FX00-1AC0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "vers:all/\u003e=V3.1.0",
                "product": {
                  "name": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)",
                  "product_id": "CSAFPID-0005",
                  "product_identification_helper": {
                    "model_numbers": [
                      "6AG1518-4AX00-4AC0"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)"
          }
        ],
        "category": "vendor",
        "name": "Siemens"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2013-0340",
      "cwe": {
        "id": "CWE-611",
        "name": "Improper Restriction of XML External Entity Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "expat 2.1.0 and earlier does not properly handle entities expansion unless an application developer uses the XML_SetEntityDeclHandler function, which allows remote attackers to cause a denial of service (resource consumption), send HTTP requests to intranet servers, or read arbitrary files via a crafted XML document, aka an XML External Entity (XXE) issue.  NOTE: it could be argued that because expat already provides the ability to disable external entity expansion, the responsibility for resolving this issue lies with application developers; according to this argument, this entry should be REJECTed, and each affected application would need its own CVE.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2013-0340"
    },
    {
      "cve": "CVE-2013-4235",
      "cwe": {
        "id": "CWE-367",
        "name": "Time-of-check Time-of-use (TOCTOU) Race Condition"
      },
      "notes": [
        {
          "category": "summary",
          "text": "shadow: TOCTOU (time-of-check time-of-use) race condition when copying and removing directory trees",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2013-4235"
    },
    {
      "cve": "CVE-2014-7209",
      "cwe": {
        "id": "CWE-77",
        "name": "Improper Neutralization of Special Elements used in a Command (\u0027Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "run-mailcap in the Debian mime-support package before 3.52-1+deb7u1 allows context-dependent attackers to execute arbitrary commands via shell metacharacters in a filename.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.0,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:R/S:C/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2014-7209"
    },
    {
      "cve": "CVE-2015-20107",
      "cwe": {
        "id": "CWE-77",
        "name": "Improper Neutralization of Special Elements used in a Command (\u0027Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Python (aka CPython) up to 3.10.8, the mailcap module does not add escape characters into commands discovered in the system mailcap file. This may allow attackers to inject shell commands into applications that call mailcap.findmatch with untrusted input (if they lack validation of user-provided filenames or arguments). The fix is also back-ported to 3.7, 3.8, 3.9",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.6,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:H/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2015-20107"
    },
    {
      "cve": "CVE-2016-3189",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Use-after-free vulnerability in bzip2recover in bzip2 1.0.6 allows remote attackers to cause a denial of service (crash) via a crafted bzip2 file, related to block ends set to before the start of the block.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2016-3189"
    },
    {
      "cve": "CVE-2016-3709",
      "cwe": {
        "id": "CWE-79",
        "name": "Improper Neutralization of Input During Web Page Generation (\u0027Cross-site Scripting\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Possible cross-site scripting vulnerability in libxml after commit 960f0e2.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2016-3709"
    },
    {
      "cve": "CVE-2016-4658",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "xpointer.c in libxml2 before 2.9.5 (as used in Apple iOS before 10, OS X before 10.12, tvOS before 10, and watchOS before 3, and other products) does not forbid namespace nodes in XPointer ranges, which allows remote attackers to execute arbitrary code or cause a denial of service (use-after-free and memory corruption) via a crafted XML document.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2016-4658"
    },
    {
      "cve": "CVE-2016-5131",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Use-after-free vulnerability in libxml2 through 2.9.4, as used in Google Chrome before 52.0.2743.82, allows remote attackers to cause a denial of service or possibly have unspecified other impact via vectors related to the XPointer range-to function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2016-5131"
    },
    {
      "cve": "CVE-2016-9318",
      "cwe": {
        "id": "CWE-611",
        "name": "Improper Restriction of XML External Entity Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libxml2 2.9.4 and earlier, as used in XMLSec 1.2.23 and earlier and other products, does not offer a flag directly indicating that the current document may be read but other files may not be opened, which makes it easier for remote attackers to conduct XML External Entity (XXE) attacks via a crafted document.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2016-9318"
    },
    {
      "cve": "CVE-2016-10228",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The iconv program in the GNU C Library (aka glibc or libc6) 2.31 and earlier, when invoked with multiple suffixes in the destination encoding (TRANSLATE or IGNORE) along with the -c option, enters an infinite loop when processing invalid multi-byte input sequences, leading to a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2016-10228"
    },
    {
      "cve": "CVE-2016-10739",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the GNU C Library (aka glibc or libc6) through 2.28, the getaddrinfo function would successfully parse a string that contained an IPv4 address followed by whitespace and arbitrary characters, which could lead applications to incorrectly assume that it had parsed a valid string, without the possibility of embedded HTTP headers or other potentially dangerous substrings.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2016-10739"
    },
    {
      "cve": "CVE-2017-0663",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A remote code execution vulnerability in libxml2 could enable an attacker using a specially crafted file to execute arbitrary code within the context of an unprivileged process. This issue is rated as High due to the possibility of remote code execution in an application that uses this library. Product: Android. Versions: 4.4.4, 5.0.2, 5.1.1, 6.0, 6.0.1, 7.0, 7.1.1, 7.1.2. Android ID: A-37104170.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2017-0663"
    },
    {
      "cve": "CVE-2017-7375",
      "cwe": {
        "id": "CWE-611",
        "name": "Improper Restriction of XML External Entity Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw in libxml2 allows remote XML entity inclusion with default parser flags (i.e., when the caller did not request entity substitution, DTD validation, external DTD subset loading, or default DTD attributes). Depending on the context, this may expose a higher-risk attack surface in libxml2 not usually reachable with default parser flags, and expose content from local files, HTTP, or FTP servers (which might be otherwise unreachable).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2017-7375"
    },
    {
      "cve": "CVE-2017-7376",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer overflow in libxml2 allows remote attackers to execute arbitrary code by leveraging an incorrect limit for port values when handling redirects.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2017-7376"
    },
    {
      "cve": "CVE-2017-9047",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A buffer overflow was discovered in libxml2 20904-GITv2.9.4-16-g0741801. The function xmlSnprintfElementContent in valid.c is supposed to recursively dump the element content definition into a char buffer \u0027buf\u0027 of size \u0027size\u0027. The variable len is assigned strlen(buf). If the content-\u003etype is XML_ELEMENT_CONTENT_ELEMENT, then (i) the content-\u003eprefix is appended to buf (if it actually fits) whereupon (ii) content-\u003ename is written to the buffer. However, the check for whether the content-\u003ename actually fits also uses \u0027len\u0027 rather than the updated buffer length strlen(buf). This allows us to write about \"size\" many bytes beyond the allocated memory. This vulnerability causes programs that use libxml2, such as PHP, to crash.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2017-9047"
    },
    {
      "cve": "CVE-2017-9048",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libxml2 20904-GITv2.9.4-16-g0741801 is vulnerable to a stack-based buffer overflow. The function xmlSnprintfElementContent in valid.c is supposed to recursively dump the element content definition into a char buffer \u0027buf\u0027 of size \u0027size\u0027. At the end of the routine, the function may strcat two more characters without checking whether the current strlen(buf) + 2 \u003c size. This vulnerability causes programs that use libxml2, such as PHP, to crash.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2017-9048"
    },
    {
      "cve": "CVE-2017-9049",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libxml2 20904-GITv2.9.4-16-g0741801 is vulnerable to a heap-based buffer over-read in the xmlDictComputeFastKey function in dict.c. This vulnerability causes programs that use libxml2, such as PHP, to crash. This vulnerability exists because of an incomplete fix for libxml2 Bug 759398.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2017-9049"
    },
    {
      "cve": "CVE-2017-9050",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libxml2 20904-GITv2.9.4-16-g0741801 is vulnerable to a heap-based buffer over-read in the xmlDictAddString function in dict.c. This vulnerability causes programs that use libxml2, such as PHP, to crash. This vulnerability exists because of an incomplete fix for CVE-2016-1839.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2017-9050"
    },
    {
      "cve": "CVE-2017-15422",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Integer overflow in international date handling in International Components for Unicode (ICU) for C/C++ before 60.1, as used in V8 in Google Chrome prior to 63.0.3239.84 and other products, allowed a remote attacker to perform an out of bounds memory read via a crafted HTML page.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2017-15422"
    },
    {
      "cve": "CVE-2017-16931",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "parser.c in libxml2 before 2.9.5 mishandles parameter-entity references because the NEXTL macro calls the xmlParserHandlePEReference function in the case of a \u0027%\u0027 character in a DTD name.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2017-16931"
    },
    {
      "cve": "CVE-2017-16932",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "parser.c in libxml2 before 2.9.5 does not prevent infinite recursion in parameter entities.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2017-16932"
    },
    {
      "cve": "CVE-2017-17512",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "sensible-browser in sensible-utils before 0.0.11 does not validate strings before launching the program specified by the BROWSER environment variable, which allows remote attackers to conduct argument-injection attacks via a crafted URL, as demonstrated by a --proxy-pac-file argument.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2017-17512"
    },
    {
      "cve": "CVE-2017-18258",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The xz_head function in xzlib.c in libxml2 before 2.9.6 allows remote attackers to cause a denial of service (memory consumption) via a crafted LZMA file, because the decoder functionality does not restrict memory usage to what is required for a legitimate file.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2017-18258"
    },
    {
      "cve": "CVE-2018-0495",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Libgcrypt before 1.7.10 and 1.8.x before 1.8.3 allows a memory-cache side-channel attack on ECDSA signatures that can be mitigated through the use of blinding during the signing process in the _gcry_ecc_ecdsa_sign function in cipher/ecc-ecdsa.c, aka the Return Of the Hidden Number Problem or ROHNP. To discover an ECDSA key, the attacker needs access to either the local machine or a different virtual machine on the same physical host.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2018-0495"
    },
    {
      "cve": "CVE-2018-12886",
      "cwe": {
        "id": "CWE-209",
        "name": "Generation of Error Message Containing Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "stack_protect_prologue in cfgexpand.c and stack_protect_epilogue in function.c in GNU Compiler Collection (GCC) 4.1 through 8 (under certain circumstances) generate instruction sequences when targeting ARM targets that spill the address of the stack protector guard, which allows an attacker to bypass the protection of -fstack-protector, -fstack-protector-all, -fstack-protector-strong, and -fstack-protector-explicit against stack overflow by controlling what the stack canary is compared against.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2018-12886"
    },
    {
      "cve": "CVE-2018-14404",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer dereference vulnerability exists in the xpath.c:xmlXPathCompOpEval() function of libxml2 through 2.9.8 when parsing an invalid XPath expression in the XPATH_OP_AND or XPATH_OP_OR case. Applications processing untrusted XSL format inputs with the use of the libxml2 library may be vulnerable to a denial of service attack due to a crash of the application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2018-14404"
    },
    {
      "cve": "CVE-2018-14567",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libxml2 2.9.8, if --with-lzma is used, allows remote attackers to cause a denial of service (infinite loop) via a crafted XML file that triggers LZMA_MEMLIMIT_ERROR, as demonstrated by xmllint, a different vulnerability than CVE-2015-8035 and CVE-2018-9251.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2018-14567"
    },
    {
      "cve": "CVE-2018-18928",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "International Components for Unicode (ICU) for C/C++ 63.1 has an integer overflow in number::impl::DecimalQuantity::toScientificString() in i18n/number_decimalquantity.cpp.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2018-18928"
    },
    {
      "cve": "CVE-2018-19591",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the GNU C Library (aka glibc or libc6) through 2.28, attempting to resolve a crafted hostname via getaddrinfo() leads to the allocation of a socket descriptor that is not closed. This is related to the if_nametoindex() function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2018-19591"
    },
    {
      "cve": "CVE-2018-20482",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU Tar through 1.30, when --sparse is used, mishandles file shrinkage during read access, which allows local users to cause a denial of service (infinite read loop in sparse_dump_region in sparse.c) by modifying a file that is supposed to be archived by a different user\u0027s process (e.g., a system backup running as root).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2018-20482"
    },
    {
      "cve": "CVE-2018-20843",
      "cwe": {
        "id": "CWE-611",
        "name": "Improper Restriction of XML External Entity Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libexpat in Expat before 2.2.7, XML input including XML names that contain a large number of colons could make the XML parser consume a high amount of RAM and CPU resources while processing (enough to be usable for denial-of-service attacks).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2018-20843"
    },
    {
      "cve": "CVE-2018-25032",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "zlib before 1.2.12 allows memory corruption when deflating (i.e., when compressing) if the input has many distant matches.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2018-25032"
    },
    {
      "cve": "CVE-2019-3855",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer overflow flaw which could lead to an out of bounds write was discovered in libssh2 before 1.8.1 in the way packets are read from the server. A remote attacker who compromises a SSH server may be able to execute code on the client system when a user connects to the server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-3855"
    },
    {
      "cve": "CVE-2019-3856",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer overflow flaw, which could lead to an out of bounds write, was discovered in libssh2 before 1.8.1 in the way keyboard prompt requests are parsed. A remote attacker who compromises a SSH server may be able to execute code on the client system when a user connects to the server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-3856"
    },
    {
      "cve": "CVE-2019-3857",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer overflow flaw which could lead to an out of bounds write was discovered in libssh2 before 1.8.1 in the way SSH_MSG_CHANNEL_REQUEST packets with an exit signal are parsed. A remote attacker who compromises a SSH server may be able to execute code on the client system when a user connects to the server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-3857"
    },
    {
      "cve": "CVE-2019-3858",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out of bounds read flaw was discovered in libssh2 before 1.8.1 when a specially crafted SFTP packet is received from the server. A remote attacker who compromises a SSH server may be able to cause a Denial of Service or read data in the client memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-3858"
    },
    {
      "cve": "CVE-2019-3859",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out of bounds read flaw was discovered in libssh2 before 1.8.1 in the _libssh2_packet_require and _libssh2_packet_requirev functions. A remote attacker who compromises a SSH server may be able to cause a Denial of Service or read data in the client memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-3859"
    },
    {
      "cve": "CVE-2019-3860",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out of bounds read flaw was discovered in libssh2 before 1.8.1 in the way SFTP packets with empty payloads are parsed. A remote attacker who compromises a SSH server may be able to cause a Denial of Service or read data in the client memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-3860"
    },
    {
      "cve": "CVE-2019-3861",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out of bounds read flaw was discovered in libssh2 before 1.8.1 in the way SSH packets with a padding length value greater than the packet length are parsed. A remote attacker who compromises a SSH server may be able to cause a Denial of Service or read data in the client memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-3861"
    },
    {
      "cve": "CVE-2019-3862",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out of bounds read flaw was discovered in libssh2 before 1.8.1 in the way SSH_MSG_CHANNEL_REQUEST packets with an exit status message and no payload are parsed. A remote attacker who compromises a SSH server may be able to cause a Denial of Service or read data in the client memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-3862"
    },
    {
      "cve": "CVE-2019-3863",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in libssh2 before 1.8.1. A server could send a multiple keyboard interactive response messages whose total length are greater than unsigned char max characters. This value is used as an index to copy memory causing in an out of bounds memory write error.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-3863"
    },
    {
      "cve": "CVE-2019-5018",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An exploitable use after free vulnerability exists in the window function functionality of Sqlite3 3.26.0. A specially crafted SQL command can cause a use after free vulnerability, potentially resulting in remote code execution. An attacker can send a malicious SQL command to trigger this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-5018"
    },
    {
      "cve": "CVE-2019-5094",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An exploitable code execution vulnerability exists in the quota file functionality of E2fsprogs 1.45.3. A specially crafted ext4 partition can cause an out-of-bounds write on the heap, resulting in code execution. An attacker can corrupt a partition to trigger this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-5094"
    },
    {
      "cve": "CVE-2019-5188",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A code execution vulnerability exists in the directory rehashing functionality of E2fsprogs e2fsck 1.45.4. A specially crafted ext4 directory can cause an out-of-bounds write on the stack, resulting in code execution. An attacker can corrupt a partition to trigger this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-5188"
    },
    {
      "cve": "CVE-2019-5435",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer overflow in curl\u0027s URL API results in a buffer overflow in libcurl 7.62.0 to and including 7.64.1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-5435"
    },
    {
      "cve": "CVE-2019-5436",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A heap buffer overflow in the TFTP receiving code allows for DoS or arbitrary code execution in libcurl versions 7.19.4 through 7.64.1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-5436"
    },
    {
      "cve": "CVE-2019-5443",
      "cwe": {
        "id": "CWE-427",
        "name": "Uncontrolled Search Path Element"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A non-privileged user or program can put code and a config file in a known non-privileged path (under C:/usr/local/) that will make curl \u003c= 7.65.1 automatically run the code (as an openssl \"engine\") on invocation. If that curl is invoked by a privileged user it can do anything it wants.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-5443"
    },
    {
      "cve": "CVE-2019-5481",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Double-free vulnerability in the FTP-kerberos code in cURL 7.52.0 to 7.65.3.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-5481"
    },
    {
      "cve": "CVE-2019-5482",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Heap buffer overflow in the TFTP protocol handler in cURL 7.19.4 to 7.65.3.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-5482"
    },
    {
      "cve": "CVE-2019-6109",
      "cwe": {
        "id": "CWE-116",
        "name": "Improper Encoding or Escaping of Output"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in OpenSSH 7.9. Due to missing character encoding in the progress display, a malicious server (or Man-in-The-Middle attacker) can employ crafted object names to manipulate the client output, e.g., by using ANSI control codes to hide additional files being transferred. This affects refresh_progress_meter() in progressmeter.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.8,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-6109"
    },
    {
      "cve": "CVE-2019-6110",
      "cwe": {
        "id": "CWE-838",
        "name": "Inappropriate Encoding for Output Context"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In OpenSSH 7.9, due to accepting and displaying arbitrary stderr output from the server, a malicious server (or Man-in-The-Middle attacker) can manipulate the client output, for example to use ANSI control codes to hide additional files being transferred.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.8,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-6110"
    },
    {
      "cve": "CVE-2019-6111",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in OpenSSH 7.9. Due to the scp implementation being derived from 1983 rcp, the server chooses which files/directories are sent to the client. However, the scp client only performs cursory validation of the object name returned (only directory traversal attacks are prevented). A malicious scp server (or Man-in-The-Middle attacker) can overwrite arbitrary files in the scp client target directory. If recursive operation (-r) is performed, the server can manipulate subdirectories as well (for example, to overwrite the .ssh/authorized_keys file).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-6111"
    },
    {
      "cve": "CVE-2019-6488",
      "cwe": {
        "id": "CWE-404",
        "name": "Improper Resource Shutdown or Release"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The string component in the GNU C Library (aka glibc or libc6) through 2.28, when running on the x32 architecture, incorrectly attempts to use a 64-bit register for size_t in assembly codes, which can lead to a segmentation fault or possibly unspecified other impact, as demonstrated by a crash in __memmove_avx_unaligned_erms in sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S during a memcpy.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-6488"
    },
    {
      "cve": "CVE-2019-7309",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the GNU C Library (aka glibc or libc6) through 2.29, the memcmp function for the x32 architecture can incorrectly return zero (indicating that the inputs are equal) because the RDX most significant bit is mishandled.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-7309"
    },
    {
      "cve": "CVE-2019-8457",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite3 from 3.6.0 to and including 3.27.2 is vulnerable to heap out-of-bound read in the rtreenode() function when handling invalid rtree tables.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-8457"
    },
    {
      "cve": "CVE-2019-9169",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the GNU C Library (aka glibc or libc6) through 2.29, proceed_next_node in posix/regexec.c has a heap-based buffer over-read via an attempted case-insensitive regular-expression match.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-9169"
    },
    {
      "cve": "CVE-2019-9636",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Python 2.7.x through 2.7.16 and 3.x through 3.7.2 is affected by: Improper Handling of Unicode Encoding (with an incorrect netloc) during NFKC normalization. The impact is: Information disclosure (credentials, cookies, etc. that are cached against a given hostname). The components are: urllib.parse.urlsplit, urllib.parse.urlparse. The attack vector is: A specially crafted URL could be incorrectly parsed to locate cookies or authentication data and send that information to a different host than when parsed correctly. This is fixed in: v2.7.17, v2.7.17rc1, v2.7.18, v2.7.18rc1; v3.5.10, v3.5.10rc1, v3.5.7, v3.5.8, v3.5.8rc1, v3.5.8rc2, v3.5.9; v3.6.10, v3.6.10rc1, v3.6.11, v3.6.11rc1, v3.6.12, v3.6.9, v3.6.9rc1; v3.7.3, v3.7.3rc1, v3.7.4, v3.7.4rc1, v3.7.4rc2, v3.7.5, v3.7.5rc1, v3.7.6, v3.7.6rc1, v3.7.7, v3.7.7rc1, v3.7.8, v3.7.8rc1, v3.7.9.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-9636"
    },
    {
      "cve": "CVE-2019-9674",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Lib/zipfile.py in Python through 3.7.2 allows remote attackers to cause a denial of service (resource consumption) via a ZIP bomb.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-9674"
    },
    {
      "cve": "CVE-2019-9740",
      "cwe": {
        "id": "CWE-93",
        "name": "Improper Neutralization of CRLF Sequences (\u0027CRLF Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in urllib2 in Python 2.x through 2.7.16 and urllib in Python 3.x through 3.7.3. CRLF injection is possible if the attacker controls a url parameter, as demonstrated by the first argument to urllib.request.urlopen with \\r\\n (specifically in the query string after a ? character) followed by an HTTP header or a Redis command. This is fixed in: v2.7.17, v2.7.17rc1, v2.7.18, v2.7.18rc1; v3.5.10, v3.5.10rc1, v3.5.8, v3.5.8rc1, v3.5.8rc2, v3.5.9; v3.6.10, v3.6.10rc1, v3.6.11, v3.6.11rc1, v3.6.12, v3.6.9, v3.6.9rc1; v3.7.4, v3.7.4rc1, v3.7.4rc2, v3.7.5, v3.7.5rc1, v3.7.6, v3.7.6rc1, v3.7.7, v3.7.7rc1, v3.7.8, v3.7.8rc1, v3.7.9.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-9740"
    },
    {
      "cve": "CVE-2019-9923",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "pax_decode_header in sparse.c in GNU Tar before 1.32 had a NULL pointer dereference when parsing certain archives that have malformed extended headers.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-9923"
    },
    {
      "cve": "CVE-2019-9936",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite 3.27.2, running fts5 prefix queries inside a transaction could trigger a heap-based buffer over-read in fts5HashEntrySort in sqlite3.c, which may lead to an information leak. This is related to ext/fts5/fts5_hash.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-9936"
    },
    {
      "cve": "CVE-2019-9937",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite 3.27.2, interleaving reads and writes in a single transaction with an fts5 virtual table will lead to a NULL Pointer Dereference in fts5ChunkIterate in sqlite3.c. This is related to ext/fts5/fts5_hash.c and ext/fts5/fts5_index.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-9937"
    },
    {
      "cve": "CVE-2019-9947",
      "cwe": {
        "id": "CWE-93",
        "name": "Improper Neutralization of CRLF Sequences (\u0027CRLF Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in urllib2 in Python 2.x through 2.7.16 and urllib in Python 3.x through 3.7.3. CRLF injection is possible if the attacker controls a url parameter, as demonstrated by the first argument to urllib.request.urlopen with \\r\\n (specifically in the path component of a URL that lacks a ? character) followed by an HTTP header or a Redis command. This is similar to the CVE-2019-9740 query string issue. This is fixed in: v2.7.17, v2.7.17rc1, v2.7.18, v2.7.18rc1; v3.5.10, v3.5.10rc1, v3.5.8, v3.5.8rc1, v3.5.8rc2, v3.5.9; v3.6.10, v3.6.10rc1, v3.6.11, v3.6.11rc1, v3.6.12, v3.6.9, v3.6.9rc1; v3.7.4, v3.7.4rc1, v3.7.4rc2, v3.7.5, v3.7.5rc1, v3.7.6, v3.7.6rc1, v3.7.7, v3.7.7rc1, v3.7.8, v3.7.8rc1, v3.7.9.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-9947"
    },
    {
      "cve": "CVE-2019-9948",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "urllib in Python 2.x through 2.7.16 supports the local_file: scheme, which makes it easier for remote attackers to bypass protection mechanisms that blacklist file: URIs, as demonstrated by triggering a urllib.urlopen(\u0027local_file:///etc/passwd\u0027) call.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-9948"
    },
    {
      "cve": "CVE-2019-10160",
      "cwe": {
        "id": "CWE-172",
        "name": "Encoding Error"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A security regression of CVE-2019-9636 was discovered in python since commit d537ab0ff9767ef024f26246899728f0116b1ec3 affecting versions 2.7, 3.5, 3.6, 3.7 and from v3.8.0a4 through v3.8.0b1, which still allows an attacker to exploit CVE-2019-9636 by abusing the user and password parts of a URL. When an application parses user-supplied URLs to store cookies, authentication credentials, or other kind of information, it is possible for an attacker to provide specially crafted URLs to make the application locate host-related information (e.g. cookies, authentication data) and send them to a different host than where it should, unlike if the URLs had been correctly parsed. The result of an attack may vary based on the application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-10160"
    },
    {
      "cve": "CVE-2019-11360",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A buffer overflow in iptables-restore in netfilter iptables 1.8.2 allows an attacker to (at least) crash the program or potentially gain code execution via a specially crafted iptables-save file. This is related to add_param_to_argv in xshared.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.2,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-11360"
    },
    {
      "cve": "CVE-2019-12290",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU libidn2 before 2.2.0 fails to perform the roundtrip checks specified in RFC3490 Section 4.2 when converting A-labels to U-labels. This makes it possible in some circumstances for one domain to impersonate another. By creating a malicious domain that matches a target domain except for the inclusion of certain punycoded Unicode characters (that would be discarded when converted first to a Unicode label and then back to an ASCII label), arbitrary domains can be impersonated.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-12290"
    },
    {
      "cve": "CVE-2019-12900",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "BZ2_decompress in decompress.c in bzip2 through 1.0.6 has an out-of-bounds write when there are many selectors.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-12900"
    },
    {
      "cve": "CVE-2019-12904",
      "cwe": {
        "id": "CWE-668",
        "name": "Exposure of Resource to Wrong Sphere"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Libgcrypt 1.8.4, the C implementation of AES is vulnerable to a flush-and-reload side-channel attack because physical addresses are available to other processes. (The C implementation is used on platforms where an assembly-language implementation is unavailable.) NOTE: the vendor\u0027s position is that the issue report cannot be validated because there is no description of an attack",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-12904"
    },
    {
      "cve": "CVE-2019-13057",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the server in OpenLDAP before 2.4.48. When the server administrator delegates rootDN (database admin) privileges for certain databases but wants to maintain isolation (e.g., for multi-tenant deployments), slapd does not properly stop a rootDN from requesting authorization as an identity from another database during a SASL bind or with a proxyAuthz (RFC 4370) control. (It is not a common configuration to deploy a system where the server administrator and a DB administrator enjoy different levels of trust.)",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-13057"
    },
    {
      "cve": "CVE-2019-13565",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in OpenLDAP 2.x before 2.4.48. When using SASL authentication and session encryption, and relying on the SASL security layers in slapd access controls, it is possible to obtain access that would otherwise be denied via a simple bind for any identity covered in those ACLs. After the first SASL bind is completed, the sasl_ssf value is retained for all new non-SASL connections. Depending on the ACL configuration, this can affect different types of operations (searches, modifications, etc.). In other words, a successful authorization step completed by one user affects the authorization requirement for a different user.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-13565"
    },
    {
      "cve": "CVE-2019-13627",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "It was discovered that there was a ECDSA timing attack in the libgcrypt20 cryptographic library. Version affected: 1.8.4-5, 1.7.6-2+deb9u3, and 1.6.3-2+deb8u4. Versions fixed: 1.8.5-2 and 1.6.3-2+deb8u7.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:N/UI:R/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-13627"
    },
    {
      "cve": "CVE-2019-15847",
      "cwe": {
        "id": "CWE-331",
        "name": "Insufficient Entropy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The POWER9 backend in GNU Compiler Collection (GCC) before version 10 could optimize multiple calls of the __builtin_darn intrinsic into a single call, thus reducing the entropy of the random number generator. This occurred because a volatile operation was not specified. For example, within a single execution of a program, the output of every __builtin_darn() call may be the same.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-15847"
    },
    {
      "cve": "CVE-2019-15903",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libexpat before 2.2.8, crafted XML input could fool the parser into changing from DTD parsing to document parsing too early; a consecutive call to XML_GetCurrentLineNumber (or XML_GetCurrentColumnNumber) then resulted in a heap-based buffer over-read.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-15903"
    },
    {
      "cve": "CVE-2019-16056",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in Python through 2.7.16, 3.x through 3.5.7, 3.6.x through 3.6.9, and 3.7.x through 3.7.4. The email module wrongly parses email addresses that contain multiple @ characters. An application that uses the email module and implements some kind of checks on the From/To headers of a message could be tricked into accepting an email address that should be denied. An attack may be the same as in CVE-2019-11340; however, this CVE applies to Python more generally.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-16056"
    },
    {
      "cve": "CVE-2019-16168",
      "cwe": {
        "id": "CWE-369",
        "name": "Divide By Zero"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite through 3.29.0, whereLoopAddBtreeIndex in sqlite3.c can crash a browser or other application because of missing validation of a sqlite_stat1 sz field, aka a \"severe division by zero in the query planner.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-16168"
    },
    {
      "cve": "CVE-2019-16905",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "OpenSSH 7.7 through 7.9 and 8.x before 8.1, when compiled with an experimental key type, has a pre-authentication integer overflow if a client or server is configured to use a crafted XMSS key. This leads to memory corruption and local code execution because of an error in the XMSS key parsing algorithm. NOTE: the XMSS implementation is considered experimental in all released OpenSSH versions, and there is no supported way to enable it when building portable OpenSSH.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-16905"
    },
    {
      "cve": "CVE-2019-17498",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libssh2 v1.9.0 and earlier versions, the SSH_MSG_DISCONNECT logic in packet.c has an integer overflow in a bounds check, enabling an attacker to specify an arbitrary (out-of-bounds) offset for a subsequent memory read. A crafted SSH server may be able to disclose sensitive information or cause a denial of service condition on the client system when a user connects to the server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-17498"
    },
    {
      "cve": "CVE-2019-17543",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "LZ4 before 1.9.2 has a heap-based buffer overflow in LZ4_write32 (related to LZ4_compress_destSize), affecting applications that call LZ4_compress_fast with a large input. (This issue can also lead to data corruption.) NOTE: the vendor states \"only a few specific / uncommon usages of the API are at risk.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-17543"
    },
    {
      "cve": "CVE-2019-17594",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a heap-based buffer over-read in the _nc_find_entry function in tinfo/comp_hash.c in the terminfo library in ncurses before 6.1-20191012.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-17594"
    },
    {
      "cve": "CVE-2019-17595",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a heap-based buffer over-read in the fmt_entry function in tinfo/comp_hash.c in the terminfo library in ncurses before 6.1-20191012.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:L/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-17595"
    },
    {
      "cve": "CVE-2019-18224",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "idn2_to_ascii_4i in lib/lookup.c in GNU libidn2 before 2.1.1 has a heap-based buffer overflow via a long domain string.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-18224"
    },
    {
      "cve": "CVE-2019-18276",
      "cwe": {
        "id": "CWE-273",
        "name": "Improper Check for Dropped Privileges"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in disable_priv_mode in shell.c in GNU Bash through 5.0 patch 11. By default, if Bash is run with its effective UID not equal to its real UID, it will drop privileges by setting its effective UID to its real UID. However, it does so incorrectly. On Linux and other systems that support \"saved UID\" functionality, the saved UID is not dropped. An attacker with command execution in the shell can use \"enable -f\" for runtime loading of a new builtin, which can be a shared object that calls setuid() and therefore regains privileges. However, binaries running with an effective UID of 0 are unaffected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-18276"
    },
    {
      "cve": "CVE-2019-18348",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in urllib2 in Python 2.x through 2.7.17 and urllib in Python 3.x through 3.8.0. CRLF injection is possible if the attacker controls a url parameter, as demonstrated by the first argument to urllib.request.urlopen with \\r\\n (specifically in the host component of a URL) followed by an HTTP header. This is similar to the CVE-2019-9740 query string issue and the CVE-2019-9947 path string issue. (This is not exploitable when glibc has CVE-2016-10739 fixed.). This is fixed in: v2.7.18, v2.7.18rc1; v3.5.10, v3.5.10rc1; v3.6.11, v3.6.11rc1, v3.6.12; v3.7.8, v3.7.8rc1, v3.7.9; v3.8.3, v3.8.3rc1, v3.8.4, v3.8.4rc1, v3.8.5, v3.8.6, v3.8.6rc1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-18348"
    },
    {
      "cve": "CVE-2019-19126",
      "cwe": {
        "id": "CWE-665",
        "name": "Improper Initialization"
      },
      "notes": [
        {
          "category": "summary",
          "text": "On the x86-64 architecture, the GNU C Library (aka glibc) before 2.31 fails to ignore the LD_PREFER_MAP_32BIT_EXEC environment variable during program execution after a security transition, allowing local attackers to restrict the possible mapping addresses for loaded libraries and thus bypass ASLR for a setuid program.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19126"
    },
    {
      "cve": "CVE-2019-19242",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite 3.30.1 mishandles pExpr-\u003ey.pTab, as demonstrated by the TK_COLUMN case in sqlite3ExprCodeTarget in expr.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19242"
    },
    {
      "cve": "CVE-2019-19244",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Select in select.c in SQLite 3.30.1 allows a crash if a sub-select uses both DISTINCT and window functions, and also has certain ORDER BY usage.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19244"
    },
    {
      "cve": "CVE-2019-19317",
      "cwe": {
        "id": "CWE-681",
        "name": "Incorrect Conversion between Numeric Types"
      },
      "notes": [
        {
          "category": "summary",
          "text": "lookupName in resolve.c in SQLite 3.30.1 omits bits from the colUsed bitmask in the case of a generated column, which allows attackers to cause a denial of service or possibly have unspecified other impact.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19317"
    },
    {
      "cve": "CVE-2019-19603",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite 3.30.1 mishandles certain SELECT statements with a nonexistent VIEW, leading to an application crash.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19603"
    },
    {
      "cve": "CVE-2019-19645",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "alter.c in SQLite through 3.30.1 allows attackers to trigger infinite recursion via certain types of self-referential views in conjunction with ALTER TABLE statements.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19645"
    },
    {
      "cve": "CVE-2019-19646",
      "cwe": {
        "id": "CWE-754",
        "name": "Improper Check for Unusual or Exceptional Conditions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "pragma.c in SQLite through 3.30.1 mishandles NOT NULL in an integrity_check PRAGMA command in certain cases of generated columns.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19646"
    },
    {
      "cve": "CVE-2019-19880",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "exprListAppendList in window.c in SQLite 3.30.1 allows attackers to trigger an invalid pointer dereference because constant integer values in ORDER BY clauses of window definitions are mishandled.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19880"
    },
    {
      "cve": "CVE-2019-19906",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "cyrus-sasl (aka Cyrus SASL) 2.1.27 has an out-of-bounds write leading to unauthenticated remote denial-of-service in OpenLDAP via a malformed LDAP packet. The OpenLDAP crash is ultimately caused by an off-by-one error in _sasl_add_string in common.c in cyrus-sasl.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19906"
    },
    {
      "cve": "CVE-2019-19923",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "flattenSubquery in select.c in SQLite 3.30.1 mishandles certain uses of SELECT DISTINCT involving a LEFT JOIN in which the right-hand side is a view. This can cause a NULL pointer dereference (or incorrect results).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19923"
    },
    {
      "cve": "CVE-2019-19924",
      "cwe": {
        "id": "CWE-755",
        "name": "Improper Handling of Exceptional Conditions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite 3.30.1 mishandles certain parser-tree rewriting, related to expr.c, vdbeaux.c, and window.c. This is caused by incorrect sqlite3WindowRewrite() error handling.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19924"
    },
    {
      "cve": "CVE-2019-19925",
      "cwe": {
        "id": "CWE-434",
        "name": "Unrestricted Upload of File with Dangerous Type"
      },
      "notes": [
        {
          "category": "summary",
          "text": "zipfileUpdate in ext/misc/zipfile.c in SQLite 3.30.1 mishandles a NULL pathname during an update of a ZIP archive.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19925"
    },
    {
      "cve": "CVE-2019-19926",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "multiSelect in select.c in SQLite 3.30.1 mishandles certain errors during parsing, as demonstrated by errors from sqlite3WindowRewrite() calls. NOTE: this vulnerability exists because of an incomplete fix for CVE-2019-19880.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19926"
    },
    {
      "cve": "CVE-2019-19956",
      "cwe": {
        "id": "CWE-772",
        "name": "Missing Release of Resource after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "xmlParseBalancedChunkMemoryRecover in parser.c in libxml2 before 2.9.10 has a memory leak related to newDoc-\u003eoldNs.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19956"
    },
    {
      "cve": "CVE-2019-19959",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ext/misc/zipfile.c in SQLite 3.30.1 mishandles certain uses of INSERT INTO in situations involving embedded \u0027\\0\u0027 characters in filenames, leading to a memory-management error that can be detected by (for example) valgrind.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-19959"
    },
    {
      "cve": "CVE-2019-20218",
      "cwe": {
        "id": "CWE-755",
        "name": "Improper Handling of Exceptional Conditions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "selectExpander in select.c in SQLite 3.30.1 proceeds with WITH stack unwinding even after a parsing error.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-20218"
    },
    {
      "cve": "CVE-2019-20367",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nlist.c in libbsd before 0.10.0 has an out-of-bounds read during a comparison for a symbol name from the string table (strtab).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-20367"
    },
    {
      "cve": "CVE-2019-20388",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "xmlSchemaPreRun in xmlschemas.c in libxml2 2.9.10 allows an xmlSchemaValidateStream memory leak.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-20388"
    },
    {
      "cve": "CVE-2019-20795",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "iproute2 before 5.1.0 has a use-after-free in get_netnsid_from_name in ip/ipnetns.c. NOTE: security relevance may be limited to certain uses of setuid that, although not a default, are sometimes a configuration option offered to end users. Even when setuid is used, other factors (such as C library configuration) may block exploitability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-20795"
    },
    {
      "cve": "CVE-2019-20907",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Lib/tarfile.py in Python through 3.8.3, an attacker is able to craft a TAR archive leading to an infinite loop when opened by tarfile.open, because _proc_pax lacks header validation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-20907"
    },
    {
      "cve": "CVE-2019-25013",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The iconv feature in the GNU C Library (aka glibc or libc6) through 2.32, when processing invalid multi-byte input sequences in the EUC-KR encoding, may have a buffer over-read.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-25013"
    },
    {
      "cve": "CVE-2019-1010022",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "** DISPUTED ** GNU Libc current is affected by: Mitigation bypass. The impact is: Attacker may bypass stack guard protection. The component is: nptl. The attack vector is: Exploit stack buffer overflow vulnerability and use this bypass vulnerability to bypass stack guard. NOTE: Upstream comments indicate \"this is being treated as a non-security bug and no real threat.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-1010022"
    },
    {
      "cve": "CVE-2019-1010023",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "** DISPUTED ** GNU Libc current is affected by: Re-mapping current loaded library with malicious ELF file. The impact is: In worst case attacker may evaluate privileges. The component is: libld. The attack vector is: Attacker sends 2 ELF files to victim and asks to run ldd on it. ldd execute code. NOTE: Upstream comments indicate \"this is being treated as a non-security bug and no real threat.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-1010023"
    },
    {
      "cve": "CVE-2019-1010024",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "** DISPUTED ** GNU Libc current is affected by: Mitigation bypass. The impact is: Attacker may bypass ASLR using cache of thread stack and heap. The component is: glibc. NOTE: Upstream comments indicate \"this is being treated as a non-security bug and no real threat.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-1010024"
    },
    {
      "cve": "CVE-2019-1010025",
      "cwe": {
        "id": "CWE-330",
        "name": "Use of Insufficiently Random Values"
      },
      "notes": [
        {
          "category": "summary",
          "text": "** DISPUTED ** GNU Libc current is affected by: Mitigation bypass. The impact is: Attacker may guess the heap addresses of pthread_created thread. The component is: glibc. NOTE: the vendor\u0027s position is \"ASLR bypass itself is not a vulnerability.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-1010025"
    },
    {
      "cve": "CVE-2019-1010180",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU gdb All versions is affected by: Buffer Overflow - Out of bound memory access. The impact is: Deny of Service, Memory Disclosure, and Possible Code Execution. The component is: The main gdb module. The attack vector is: Open an ELF for debugging. The fixed version is: Not fixed yet.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2019-1010180"
    },
    {
      "cve": "CVE-2020-1712",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A heap use-after-free vulnerability was found in systemd before version v245-rc1, where asynchronous Polkit queries are performed while handling dbus messages. A local unprivileged attacker can abuse this flaw to crash systemd services or potentially execute code and elevate their privileges, by sending specially crafted dbus messages.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-1712"
    },
    {
      "cve": "CVE-2020-1751",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds write vulnerability was found in glibc before 2.31 when handling signal trampolines on PowerPC. Specifically, the backtrace function did not properly check the array bounds when storing the frame address, resulting in a denial of service or potential code execution. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-1751"
    },
    {
      "cve": "CVE-2020-1752",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability introduced in glibc upstream version 2.14 was found in the way the tilde expansion was carried out. Directory paths containing an initial tilde followed by a valid username were affected by this issue. A local attacker could exploit this flaw by creating a specially crafted path that, when processed by the glob function, would potentially lead to arbitrary code execution. This was fixed in version 2.32.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-1752"
    },
    {
      "cve": "CVE-2020-6096",
      "cwe": {
        "id": "CWE-195",
        "name": "Signed to Unsigned Conversion Error"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An exploitable signed comparison vulnerability exists in the ARMv7 memcpy() implementation of GNU glibc 2.30.9000. Calling memcpy() (on ARMv7 targets that utilize the GNU glibc implementation) with a negative value for the \u0027num\u0027 parameter results in a signed comparison vulnerability. If an attacker underflows the \u0027num\u0027 parameter to memcpy(), this vulnerability could lead to undefined behavior such as writing to out-of-bounds memory and potentially remote code execution. Furthermore, this memcpy() implementation allows for program execution to continue in scenarios where a segmentation fault or crash should have occurred. The dangers occur in that subsequent execution and iterations of this code will be executed with this corrupted data.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-6096"
    },
    {
      "cve": "CVE-2020-7595",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "xmlStringLenDecodeEntities in parser.c in libxml2 2.9.10 has an infinite loop in a certain end-of-file situation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-7595"
    },
    {
      "cve": "CVE-2020-8169",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The libcurl library versions 7.62.0 to and including  7.70.0 are vulnerable to an information disclosure vulnerability that can lead to a partial password being leaked over the network and to the DNS server(s).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-8169"
    },
    {
      "cve": "CVE-2020-8177",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl 7.20.0 through 7.70.0 is vulnerable to improper restriction of names for files and other resources that can lead too overwriting a local file when the -J flag is used.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-8177"
    },
    {
      "cve": "CVE-2020-8231",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Due to use of a dangling pointer, libcurl 7.29.0 through 7.71.1 can use the wrong connection when sending data.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-8231"
    },
    {
      "cve": "CVE-2020-8284",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A malicious server can use the FTP PASV response to trick curl 7.73.0 and earlier into connecting back to a given IP address and port, and this way potentially make curl extract information about services that are otherwise private and not disclosed, for example doing port scanning and service banner extractions.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-8284"
    },
    {
      "cve": "CVE-2020-8285",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl 7.21.0 to and including 7.73.0 is vulnerable to uncontrolled recursion due to a stack overflow issue in FTP wildcard match parsing.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-8285"
    },
    {
      "cve": "CVE-2020-8286",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The libcurl library versions 7.41.0 to and including  7.73.0 are vulnerable to an improper check for certificate revocation due to insufficient verification of the OCSP response. This vulnerability could allow an attacker to pass a revoked certificate as valid.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-8286"
    },
    {
      "cve": "CVE-2020-8315",
      "cwe": {
        "id": "CWE-427",
        "name": "Uncontrolled Search Path Element"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Python (CPython) 3.6 through 3.6.10, 3.7 through 3.7.6, and 3.8 through 3.8.1, an insecure dependency load upon launch on Windows 7 may result in an attacker\u0027s copy of api-ms-win-core-path-l1-1-0.dll being loaded and used instead of the system\u0027s copy. Windows 8 and later are unaffected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-8315"
    },
    {
      "cve": "CVE-2020-8492",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Python 2.7 through 2.7.17, 3.5 through 3.5.9, 3.6 through 3.6.10, 3.7 through 3.7.6, and 3.8 through 3.8.1 allows an HTTP server to conduct Regular Expression Denial of Service (ReDoS) attacks against a client because of urllib.request.AbstractBasicAuthHandler catastrophic backtracking.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-8492"
    },
    {
      "cve": "CVE-2020-9327",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite 3.31.1, isAuxiliaryVtabOperator allows attackers to trigger a NULL pointer dereference and segmentation fault because of generated column optimizations.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-9327"
    },
    {
      "cve": "CVE-2020-10029",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The GNU C Library (aka glibc or libc6) before 2.32 could overflow an on-stack buffer during range reduction if an input to an 80-bit long double function contains a non-canonical bit pattern, a seen when passing a 0x5d414141414141410000 value to sinl on x86 targets. This is related to sysdeps/ieee754/ldbl-96/e_rem_pio2l.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-10029"
    },
    {
      "cve": "CVE-2020-10531",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in International Components for Unicode (ICU) for C/C++ through 66.1. An integer overflow, leading to a heap-based buffer overflow, exists in the UnicodeString::doAppend() function in common/unistr.cpp.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-10531"
    },
    {
      "cve": "CVE-2020-10543",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Perl before 5.30.3 on 32-bit platforms allows a heap-based buffer overflow because nested regular expression quantifiers have an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.2,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-10543"
    },
    {
      "cve": "CVE-2020-10735",
      "cwe": {
        "id": "CWE-704",
        "name": "Incorrect Type Conversion or Cast"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in python. In algorithms with quadratic time complexity using non-binary bases, when using int(\"text\"), a system could take 50ms to parse an int string with 100,000 digits and 5s for 1,000,000 digits (float, decimal, int.from_bytes(), and int() for binary bases 2, 4, 8, 16, and 32 are not affected). The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-10735"
    },
    {
      "cve": "CVE-2020-10878",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Perl before 5.30.3 has an integer overflow related to mishandling of a \"PL_regkind[OP(n)] == NOTHING\" situation. A crafted regular expression could lead to malformed bytecode with a possibility of instruction injection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.6,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-10878"
    },
    {
      "cve": "CVE-2020-11501",
      "cwe": {
        "id": "CWE-330",
        "name": "Use of Insufficiently Random Values"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GnuTLS 3.6.x before 3.6.13 uses incorrect cryptography for DTLS. The earliest affected version is 3.6.3 (2018-07-16) because of an error in a 2017-10-06 commit. The DTLS client always uses 32 \u0027\\0\u0027 bytes instead of a random value, and thus contributes no randomness to a DTLS negotiation. This breaks the security guarantees of the DTLS protocol.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-11501"
    },
    {
      "cve": "CVE-2020-11655",
      "cwe": {
        "id": "CWE-665",
        "name": "Improper Initialization"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite through 3.31.1 allows attackers to cause a denial of service (segmentation fault) via a malformed window-function query because the AggInfo object\u0027s initialization is mishandled.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-11655"
    },
    {
      "cve": "CVE-2020-11656",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite through 3.31.1, the ALTER TABLE implementation has a use-after-free, as demonstrated by an ORDER BY clause that belongs to a compound SELECT statement.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-11656"
    },
    {
      "cve": "CVE-2020-12062",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The scp client in OpenSSH 8.2 incorrectly sends duplicate responses to the server upon a utimes system call failure, which allows a malicious unprivileged user on the remote server to overwrite arbitrary files in the client\u0027s download directory by creating a crafted subdirectory anywhere on the remote server. The victim must use the command scp -rp to download a file hierarchy containing, anywhere inside, this crafted subdirectory. NOTE: the vendor points out that \"this attack can achieve no more than a hostile peer is already able to achieve within the scp protocol\" and \"utimes does not fail under normal circumstances.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-12062"
    },
    {
      "cve": "CVE-2020-12243",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In filter.c in slapd in OpenLDAP before 2.4.50, LDAP search filters with nested boolean expressions can result in denial of service (daemon crash).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-12243"
    },
    {
      "cve": "CVE-2020-12723",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "regcomp.c in Perl before 5.30.3 allows a buffer overflow via a crafted regular expression because of recursive S_study_chunk calls.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-12723"
    },
    {
      "cve": "CVE-2020-12762",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "json-c through 0.14 has an integer overflow and out-of-bounds write via a large JSON file, as demonstrated by printbuf_memappend.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-12762"
    },
    {
      "cve": "CVE-2020-13434",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite through 3.32.0 has an integer overflow in sqlite3_str_vappendf in printf.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-13434"
    },
    {
      "cve": "CVE-2020-13435",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite through 3.32.0 has a segmentation fault in sqlite3ExprCodeTarget in expr.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-13435"
    },
    {
      "cve": "CVE-2020-13529",
      "cwe": {
        "id": "CWE-290",
        "name": "Authentication Bypass by Spoofing"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An exploitable denial-of-service vulnerability exists in Systemd 245. A specially crafted DHCP FORCERENEW packet can cause a server running the DHCP client to be vulnerable to a DHCP ACK spoofing attack. An attacker can forge a pair of FORCERENEW and DCHP ACK packets to reconfigure the server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:A/AC:H/PR:N/UI:N/S:C/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-13529"
    },
    {
      "cve": "CVE-2020-13630",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ext/fts3/fts3.c in SQLite before 3.32.0 has a use-after-free in fts3EvalNextRow, related to the snippet feature.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-13630"
    },
    {
      "cve": "CVE-2020-13631",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite before 3.32.0 allows a virtual table to be renamed to the name of one of its shadow tables, related to alter.c and build.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-13631"
    },
    {
      "cve": "CVE-2020-13632",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ext/fts3/fts3_snippet.c in SQLite before 3.32.0 has a NULL pointer dereference via a crafted matchinfo() query.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-13632"
    },
    {
      "cve": "CVE-2020-13776",
      "cwe": {
        "id": "CWE-269",
        "name": "Improper Privilege Management"
      },
      "notes": [
        {
          "category": "summary",
          "text": "systemd through v245 mishandles numerical usernames such as ones composed of decimal digits or 0x followed by hex digits, as demonstrated by use of root privileges when privileges of the 0x0 user account were intended. NOTE: this issue exists because of an incomplete fix for CVE-2017-1000082.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-13776"
    },
    {
      "cve": "CVE-2020-13777",
      "cwe": {
        "id": "CWE-327",
        "name": "Use of a Broken or Risky Cryptographic Algorithm"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GnuTLS 3.6.x before 3.6.14 uses incorrect cryptography for encrypting a session ticket (a loss of confidentiality in TLS 1.2, and an authentication bypass in TLS 1.3). The earliest affected version is 3.6.4 (2018-09-24) because of an error in a 2018-09-18 commit. Until the first key rotation, the TLS server always uses wrong data in place of an encryption key derived from an application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-13777"
    },
    {
      "cve": "CVE-2020-13871",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite 3.32.2 has a use-after-free in resetAccumulator in select.c because the parse tree rewrite for window functions is too late.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-13871"
    },
    {
      "cve": "CVE-2020-14145",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The client side in OpenSSH 5.7 through 8.4 has an Observable Discrepancy leading to an information leak in the algorithm negotiation. This allows man-in-the-middle attackers to target initial connection attempts (where no host key for the server has been cached by the client). NOTE: some reports state that 8.5 and 8.6 are also affected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-14145"
    },
    {
      "cve": "CVE-2020-14422",
      "cwe": {
        "id": "CWE-682",
        "name": "Incorrect Calculation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Lib/ipaddress.py in Python through 3.8.3 improperly computes hash values in the IPv4Interface and IPv6Interface classes, which might allow a remote attacker to cause a denial of service if an application is affected by the performance of a dictionary containing IPv4Interface or IPv6Interface objects, and this attacker can cause many dictionary entries to be created. This is fixed in: v3.5.10, v3.5.10rc1; v3.6.12; v3.7.9; v3.8.4, v3.8.4rc1, v3.8.5, v3.8.6, v3.8.6rc1; v3.9.0, v3.9.0b4, v3.9.0b5, v3.9.0rc1, v3.9.0rc2.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-14422"
    },
    {
      "cve": "CVE-2020-15358",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite before 3.32.3, select.c mishandles query-flattener optimization, leading to a multiSelectOrderBy heap overflow because of misuse of transitive properties for constant propagation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-15358"
    },
    {
      "cve": "CVE-2020-15523",
      "cwe": {
        "id": "CWE-427",
        "name": "Uncontrolled Search Path Element"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Python 3.6 through 3.6.10, 3.7 through 3.7.8, 3.8 through 3.8.4rc1, and 3.9 through 3.9.0b4 on Windows, a Trojan horse python3.dll might be used in cases where CPython is embedded in a native application. This occurs because python3X.dll may use an invalid search path for python3.dll loading (after Py_SetPath has been used). NOTE: this issue CANNOT occur when using python.exe from a standard (non-embedded) Python installation on Windows.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-15523"
    },
    {
      "cve": "CVE-2020-15778",
      "cwe": {
        "id": "CWE-78",
        "name": "Improper Neutralization of Special Elements used in an OS Command (\u0027OS Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "scp in OpenSSH through 8.3p1 allows command injection in the scp.c toremote function, as demonstrated by backtick characters in the destination argument. NOTE: the vendor reportedly has stated that they intentionally omit validation of \"anomalous argument transfers\" because that could \"stand a great chance of breaking existing workflows.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-15778"
    },
    {
      "cve": "CVE-2020-15801",
      "cwe": {
        "id": "CWE-426",
        "name": "Untrusted Search Path"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Python 3.8.4, sys.path restrictions specified in a python38._pth file are ignored, allowing code to be loaded from arbitrary locations. The \u003cexecutable-name\u003e._pth file (e.g., the python._pth file) is not affected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-15801"
    },
    {
      "cve": "CVE-2020-19185",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer Overflow vulnerability in one_one_mapping function in progs/dump_entry.c:1373 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-19185"
    },
    {
      "cve": "CVE-2020-19186",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer Overflow vulnerability in _nc_find_entry function in tinfo/comp_hash.c:66 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-19186"
    },
    {
      "cve": "CVE-2020-19187",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer Overflow vulnerability in fmt_entry function in progs/dump_entry.c:1100 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-19187"
    },
    {
      "cve": "CVE-2020-19188",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer Overflow vulnerability in fmt_entry function in progs/dump_entry.c:1116 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-19188"
    },
    {
      "cve": "CVE-2020-19189",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer Overflow vulnerability in postprocess_terminfo function in tinfo/parse_entry.c:997 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-19189"
    },
    {
      "cve": "CVE-2020-19190",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Buffer Overflow vulnerability in _nc_find_entry in tinfo/comp_hash.c:70 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-19190"
    },
    {
      "cve": "CVE-2020-19909",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Integer overflow vulnerability in tool_operate.c in curl 7.65.2 via a large value as the retry delay. NOTE: many parties report that this has no direct security impact on the curl user; however, it may (in theory) cause a denial of service to associated systems or networks if, for example, --retry-delay is misinterpreted as a value much smaller than what was intended. This is not especially plausible because the overflow only happens if the user was trying to specify that curl should wait weeks (or longer) before trying to recover from a transient error.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-19909"
    },
    {
      "cve": "CVE-2020-21047",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The libcpu component which is used by libasm of elfutils version 0.177 (git 47780c9e), suffers from denial-of-service vulnerability caused by application crashes due to out-of-bounds write (CWE-787), off-by-one error (CWE-193) and reachable assertion (CWE-617); to exploit the vulnerability, the attackers need to craft certain ELF files which bypass the missing bound checks.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-21047"
    },
    {
      "cve": "CVE-2020-21913",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "International Components for Unicode (ICU-20850) v66.1 was discovered to contain a use after free bug in the pkg_createWithAssemblyCode function in the file tools/pkgdata/pkgdata.cpp.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-21913"
    },
    {
      "cve": "CVE-2020-22218",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in function _libssh2_packet_add in libssh2 1.10.0 allows attackers to access out of bounds memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-22218"
    },
    {
      "cve": "CVE-2020-24659",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in GnuTLS before 3.6.15. A server can trigger a NULL pointer dereference in a TLS 1.3 client if a no_renegotiation alert is sent with unexpected timing, and then an invalid second handshake occurs. The crash happens in the application\u0027s error handling path, where the gnutls_deinit function is called after detecting a handshake failure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-24659"
    },
    {
      "cve": "CVE-2020-24977",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNOME project libxml2 v2.9.10 has a global buffer over-read vulnerability in xmlEncodeEntitiesInternal at libxml2/entities.c. The issue has been fixed in commit 50f06b3e.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-24977"
    },
    {
      "cve": "CVE-2020-25692",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer dereference was found in OpenLDAP server and was fixed in openldap 2.4.55, during a request for renaming RDNs. An unauthenticated attacker could remotely crash the slapd process by sending a specially crafted request, causing a Denial of Service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-25692"
    },
    {
      "cve": "CVE-2020-25709",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in OpenLDAP. This flaw allows an attacker who can send a malicious packet to be processed by OpenLDAP\u2019s slapd server, to trigger an assertion failure. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-25709"
    },
    {
      "cve": "CVE-2020-25710",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in OpenLDAP in versions before 2.4.56. This flaw allows an attacker who sends a malicious packet processed by OpenLDAP to force a failed assertion in csnNormalize23(). The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-25710"
    },
    {
      "cve": "CVE-2020-26116",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "http.client in Python 3.x before 3.5.10, 3.6.x before 3.6.12, 3.7.x before 3.7.9, and 3.8.x before 3.8.5 allows CRLF injection if the attacker controls the HTTP request method, as demonstrated by inserting CR and LF control characters in the first argument of HTTPConnection.request.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.2,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-26116"
    },
    {
      "cve": "CVE-2020-27618",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The iconv function in the GNU C Library (aka glibc or libc6) 2.32 and earlier, when processing invalid multi-byte input sequences in IBM1364, IBM1371, IBM1388, IBM1390, and IBM1399 encodings, fails to advance the input state, which could lead to an infinite loop in applications, resulting in a denial of service, a different vulnerability from CVE-2016-10228.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-27618"
    },
    {
      "cve": "CVE-2020-28196",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "MIT Kerberos 5 (aka krb5) before 1.17.2 and 1.18.x before 1.18.3 allows unbounded recursion via an ASN.1-encoded Kerberos message because the lib/krb5/asn.1/asn1_encode.c support for BER indefinite lengths lacks a recursion limit.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-28196"
    },
    {
      "cve": "CVE-2020-29361",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in p11-kit 0.21.1 through 0.23.21. Multiple integer overflows have been discovered in the array allocations in the p11-kit library and the p11-kit list command, where overflow checks are missing before calling realloc or calloc.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-29361"
    },
    {
      "cve": "CVE-2020-29362",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in p11-kit 0.21.1 through 0.23.21. A heap-based buffer over-read has been discovered in the RPC protocol used by thep11-kit server/remote commands and the client library. When the remote entity supplies a byte array through a serialized PKCS#11 function call, the receiving entity may allow the reading of up to 4 bytes of memory past the heap allocation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-29362"
    },
    {
      "cve": "CVE-2020-29363",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in p11-kit 0.23.6 through 0.23.21. A heap-based buffer overflow has been discovered in the RPC protocol used by p11-kit server/remote commands and the client library. When the remote entity supplies a serialized byte array in a CK_ATTRIBUTE, the receiving entity may not allocate sufficient length for the buffer to store the deserialized value.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-29363"
    },
    {
      "cve": "CVE-2020-29562",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The iconv function in the GNU C Library (aka glibc or libc6) 2.30 to 2.32, when converting UCS4 text containing an irreversible character, fails an assertion in the code path and aborts the program, potentially resulting in a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.8,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:L/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-29562"
    },
    {
      "cve": "CVE-2020-29573",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "sysdeps/i386/ldbl2mpn.c in the GNU C Library (aka glibc or libc6) before 2.23 on x86 targets has a stack-based buffer overflow if the input to any of the printf family of functions is an 80-bit long double with a non-canonical bit pattern, as seen when passing a \\x00\\x04\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x04 value to sprintf. NOTE: the issue does not affect glibc by default in 2016 or later (i.e., 2.23 or later) because of commits made in 2015 for inlining of C99 math functions through use of GCC built-ins. In other words, the reference to 2.23 is intentional despite the mention of \"Fixed for glibc 2.33\" in the 26649 reference.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-29573"
    },
    {
      "cve": "CVE-2020-35525",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQlite 3.31.1, a potential null pointer derreference was found in the INTERSEC query processing.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-35525"
    },
    {
      "cve": "CVE-2020-35527",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In SQLite 3.31.1, there is an out of bounds access problem through ALTER TABLE for views that have a nested FROM clause.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-35527"
    },
    {
      "cve": "CVE-2020-36221",
      "cwe": {
        "id": "CWE-191",
        "name": "Integer Underflow (Wrap or Wraparound)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer underflow was discovered in OpenLDAP before 2.4.57 leading to slapd crashes in the Certificate Exact Assertion processing, resulting in denial of service (schema_init.c serialNumberAndIssuerCheck).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-36221"
    },
    {
      "cve": "CVE-2020-36222",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading to an assertion failure in slapd in the saslAuthzTo validation, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-36222"
    },
    {
      "cve": "CVE-2020-36223",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading to a slapd crash in the Values Return Filter control handling, resulting in denial of service (double free and out-of-bounds read).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-36223"
    },
    {
      "cve": "CVE-2020-36224",
      "cwe": {
        "id": "CWE-763",
        "name": "Release of Invalid Pointer or Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading to an invalid pointer free and slapd crash in the saslAuthzTo processing, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-36224"
    },
    {
      "cve": "CVE-2020-36225",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading to a double free and slapd crash in the saslAuthzTo processing, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-36225"
    },
    {
      "cve": "CVE-2020-36226",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading to a memch-\u003ebv_len miscalculation and slapd crash in the saslAuthzTo processing, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-36226"
    },
    {
      "cve": "CVE-2020-36227",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading to an infinite loop in slapd with the cancel_extop Cancel operation, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-36227"
    },
    {
      "cve": "CVE-2020-36228",
      "cwe": {
        "id": "CWE-191",
        "name": "Integer Underflow (Wrap or Wraparound)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer underflow was discovered in OpenLDAP before 2.4.57 leading to a slapd crash in the Certificate List Exact Assertion processing, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-36228"
    },
    {
      "cve": "CVE-2020-36229",
      "cwe": {
        "id": "CWE-843",
        "name": "Access of Resource Using Incompatible Type (\u0027Type Confusion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in ldap_X509dn2bv in OpenLDAP before 2.4.57 leading to a slapd crash in the X.509 DN parsing in ad_keystring, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-36229"
    },
    {
      "cve": "CVE-2020-36230",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was discovered in OpenLDAP before 2.4.57 leading in an assertion failure in slapd in the X.509 DN parsing in decode.c ber_next_element, resulting in denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2020-36230"
    },
    {
      "cve": "CVE-2021-3177",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Python 3.x through 3.9.1 has a buffer overflow in PyCArg_repr in _ctypes/callproc.c, which may lead to remote code execution in certain Python applications that accept floating-point numbers as untrusted input, as demonstrated by a 1e300 argument to c_double.from_param. This occurs because sprintf is used unsafely.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3177"
    },
    {
      "cve": "CVE-2021-3326",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The iconv function in the GNU C Library (aka glibc or libc6) 2.32 and earlier, when processing invalid input sequences in the ISO-2022-JP-3 encoding, fails an assertion in the code path and aborts the program, potentially resulting in a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3326"
    },
    {
      "cve": "CVE-2021-3426",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There\u0027s a flaw in Python 3\u0027s pydoc. A local or adjacent attacker who discovers or is able to convince another local or adjacent user to start a pydoc server could access the server and use it to disclose sensitive information belonging to the other user that they would not normally be able to access. The highest risk of this flaw is to data confidentiality. This flaw affects Python versions before 3.8.9, Python versions before 3.9.3 and Python versions before 3.10.0a7.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3426"
    },
    {
      "cve": "CVE-2021-3516",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There\u0027s a flaw in libxml2\u0027s xmllint in versions before 2.9.11. An attacker who is able to submit a crafted file to be processed by xmllint could trigger a use-after-free. The greatest impact of this flaw is to confidentiality, integrity, and availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3516"
    },
    {
      "cve": "CVE-2021-3517",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a flaw in the xml entity encoding functionality of libxml2 in versions before 2.9.11. An attacker who is able to supply a crafted file to be processed by an application linked with the affected functionality of libxml2 could trigger an out-of-bounds read. The most likely impact of this flaw is to application availability, with some potential impact to confidentiality and integrity if an attacker is able to use memory information to further exploit the application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.6,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3517"
    },
    {
      "cve": "CVE-2021-3518",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There\u0027s a flaw in libxml2 in versions before 2.9.11. An attacker who is able to submit a crafted file to be processed by an application linked with libxml2 could trigger a use-after-free. The greatest impact from this flaw is to confidentiality, integrity, and availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3518"
    },
    {
      "cve": "CVE-2021-3520",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There\u0027s a flaw in lz4. An attacker who submits a crafted file to an application linked with lz4 may be able to trigger an integer overflow, leading to calling of memmove() on a negative size argument, causing an out-of-bounds write and/or a crash. The greatest impact of this flaw is to availability, with some potential impact to confidentiality and integrity as well.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3520"
    },
    {
      "cve": "CVE-2021-3537",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability found in libxml2 in versions before 2.9.11 shows that it did not propagate errors while parsing XML mixed content, causing a NULL dereference. If an untrusted XML document was parsed in recovery mode and post-validated, the flaw could be used to crash the application. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3537"
    },
    {
      "cve": "CVE-2021-3541",
      "cwe": {
        "id": "CWE-776",
        "name": "Improper Restriction of Recursive Entity References in DTDs (\u0027XML Entity Expansion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in libxml2. Exponential entity expansion attack its possible bypassing all existing protection mechanisms and leading to denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3541"
    },
    {
      "cve": "CVE-2021-3580",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the way nettle\u0027s RSA decryption functions handled specially crafted ciphertext. An attacker could use this flaw to provide a manipulated ciphertext leading to application crash and denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3580"
    },
    {
      "cve": "CVE-2021-3733",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There\u0027s a flaw in urllib\u0027s AbstractBasicAuthHandler class. An attacker who controls a malicious HTTP server that an HTTP client (such as web browser) connects to, could trigger a Regular Expression Denial of Service (ReDOS) during an authentication request with a specially crafted payload that is sent by the server to the client. The greatest threat that this flaw poses is to application availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3733"
    },
    {
      "cve": "CVE-2021-3737",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in python. An improperly handled HTTP response in the HTTP client code of python may allow a remote attacker, who controls the HTTP server, to make the client script enter an infinite loop, consuming CPU time. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3737"
    },
    {
      "cve": "CVE-2021-3826",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Heap/stack buffer overflow in the dlang_lname function in d-demangle.c in libiberty allows attackers to potentially cause a denial of service (segmentation fault and crash) via a crafted mangled symbol.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3826"
    },
    {
      "cve": "CVE-2021-3997",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in systemd. An uncontrolled recursion in systemd-tmpfiles may lead to a denial of service at boot time when too many nested directories are created in /tmp.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3997"
    },
    {
      "cve": "CVE-2021-3998",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in glibc. The realpath() function can mistakenly return an unexpected value, potentially leading to information leakage and disclosure of sensitive data.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3998"
    },
    {
      "cve": "CVE-2021-3999",
      "cwe": {
        "id": "CWE-193",
        "name": "Off-by-one Error"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in glibc. An off-by-one buffer overflow and underflow in getcwd() may lead to memory corruption when the size of the buffer is exactly 1. A local attacker who can control the input buffer and size passed to getcwd() in a setuid program could use this flaw to potentially execute arbitrary code and escalate their privileges on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-3999"
    },
    {
      "cve": "CVE-2021-4122",
      "cwe": {
        "id": "CWE-345",
        "name": "Insufficient Verification of Data Authenticity"
      },
      "notes": [
        {
          "category": "summary",
          "text": "It was found that a specially crafted LUKS header could trick cryptsetup into disabling encryption during the recovery of the device. An attacker with physical access to the medium, such as a flash disk, could use this flaw to force a user into permanently disabling the encryption layer of that medium.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:P/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-4122"
    },
    {
      "cve": "CVE-2021-4189",
      "cwe": {
        "id": "CWE-252",
        "name": "Unchecked Return Value"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in Python, specifically in the FTP (File Transfer Protocol) client library in PASV (passive) mode. The issue is how the FTP client trusts the host from the PASV response by default. This flaw allows an attacker to set up a malicious FTP server that can trick FTP clients into connecting back to a given IP address and port. This vulnerability could lead to FTP client scanning ports, which otherwise would not have been possible.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-4189"
    },
    {
      "cve": "CVE-2021-4209",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer dereference flaw was found in GnuTLS. As Nettle\u0027s hash update functions internally call memcpy, providing zero-length input may cause undefined behavior. This flaw leads to a denial of service after authentication in rare circumstances.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-4209"
    },
    {
      "cve": "CVE-2021-20193",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the src/list.c of tar 1.33 and earlier. This flaw allows an attacker who can submit a crafted input file to tar to cause uncontrolled consumption of memory. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-20193"
    },
    {
      "cve": "CVE-2021-20227",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in SQLite\u0027s SELECT query functionality (src/select.c). This flaw allows an attacker who is capable of running SQL queries locally on the SQLite database to cause a denial of service or possible code execution by triggering a use-after-free. The highest threat from this vulnerability is to system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-20227"
    },
    {
      "cve": "CVE-2021-20231",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in gnutls. A use after free issue in client sending key_share extension may lead to memory corruption and other consequences.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-20231"
    },
    {
      "cve": "CVE-2021-20232",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in gnutls. A use after free issue in client_send_params in lib/ext/pre_shared_key.c may lead to memory corruption and other potential consequences.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-20232"
    },
    {
      "cve": "CVE-2021-20305",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in Nettle in versions before 3.7.2, where several Nettle signature verification functions (GOST DSA, EDDSA \u0026 ECDSA) result in the Elliptic Curve Cryptography point (ECC) multiply function being called with out-of-range scalers, possibly resulting in incorrect results. This flaw allows an attacker to force an invalid signature, causing an assertion failure or possible validation. The highest threat to this vulnerability is to confidentiality, integrity, as well as system availability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-20305"
    },
    {
      "cve": "CVE-2021-22876",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl 7.1.1 to and including 7.75.0 is vulnerable to an \"Exposure of Private Personal Information to an Unauthorized Actor\" by leaking credentials in the HTTP Referer: header. libcurl does not strip off user credentials from the URL when automatically populating the Referer: HTTP request header field in outgoing HTTP requests, and therefore risks leaking sensitive data to the server that is the target of the second HTTP request.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-22876"
    },
    {
      "cve": "CVE-2021-22890",
      "cwe": {
        "id": "CWE-290",
        "name": "Authentication Bypass by Spoofing"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl 7.63.0 to and including 7.75.0 includes vulnerability that allows a malicious HTTPS proxy to MITM a connection due to bad handling of TLS 1.3 session tickets. When using a HTTPS proxy and TLS 1.3, libcurl can confuse session tickets arriving from the HTTPS proxy but work as if they arrived from the remote server and then wrongly \"short-cut\" the host handshake. When confusing the tickets, a HTTPS proxy can trick libcurl to use the wrong session ticket resume for the host and thereby circumvent the server TLS certificate check and make a MITM attack to be possible to perform unnoticed. Note that such a malicious HTTPS proxy needs to provide a certificate that curl will accept for the MITMed server for an attack to work - unless curl has been told to ignore the server certificate check.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-22890"
    },
    {
      "cve": "CVE-2021-22897",
      "cwe": {
        "id": "CWE-668",
        "name": "Exposure of Resource to Wrong Sphere"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl 7.61.0 through 7.76.1 suffers from exposure of data element to wrong session due to a mistake in the code for CURLOPT_SSL_CIPHER_LIST when libcurl is built to use the Schannel TLS library. The selected cipher set was stored in a single \"static\" variable in the library, which has the surprising side-effect that if an application sets up multiple concurrent transfers, the last one that sets the ciphers will accidentally control the set used by all transfers. In a worst-case scenario, this weakens transport security significantly.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-22897"
    },
    {
      "cve": "CVE-2021-22898",
      "cwe": {
        "id": "CWE-909",
        "name": "Missing Initialization of Resource"
      },
      "notes": [
        {
          "category": "summary",
          "text": "**NOTE: CVE-2021-22898 is an incomplete fix (see https://hackerone.com/reports/1223882)! Check if affected products also have fixed CVE-22925 instead! Do not use CVE-2021-22898 in public advisories!**\r\n\r\ncurl 7.7 through 7.76.1 suffers from an information disclosure when the `-t` command line option, known as `CURLOPT_TELNETOPTIONS` in libcurl, is used to send variable=content pairs to TELNET servers. Due to a flaw in the option parser for sending NEW_ENV variables, libcurl could be made to pass on uninitialized data from a stack based buffer to the server, resulting in potentially revealing sensitive internal information to the server using a clear-text network protocol.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.1,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-22898"
    },
    {
      "cve": "CVE-2021-22901",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl 7.75.0 through 7.76.1 suffers from a use-after-free vulnerability resulting in already freed memory being used when a TLS 1.3 session ticket arrives over a connection. A malicious server can use this in rare unfortunate circumstances to potentially reach remote code execution in the client. When libcurl at run-time sets up support for TLS 1.3 session tickets on a connection using OpenSSL, it stores pointers to the transfer in-memory object for later retrieval when a session ticket arrives. If the connection is used by multiple transfers (like with a reused HTTP/1.1 connection or multiplexed HTTP/2 connection) that first transfer object might be freed before the new session is established on that connection and then the function will access a memory buffer that might be freed. When using that memory, libcurl might even call a function pointer in the object, making it possible for a remote code execution if the server could somehow manage to get crafted memory content into the correct place in memory.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-22901"
    },
    {
      "cve": "CVE-2021-22922",
      "cwe": {
        "id": "CWE-354",
        "name": "Improper Validation of Integrity Check Value"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl is instructed to download content using the metalink feature, thecontents is verified against a hash provided in the metalink XML file.The metalink XML file points out to the client how to get the same contentfrom a set of different URLs, potentially hosted by different servers and theclient can then download the file from one or several of them. In a serial orparallel manner.If one of the servers hosting the contents has been breached and the contentsof the specific file on that server is replaced with a modified payload, curlshould detect this when the hash of the file mismatches after a completeddownload. It should remove the contents and instead try getting the contentsfrom another URL. This is not done, and instead such a hash mismatch is onlymentioned in text and the potentially malicious content is kept in the file ondisk.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-22922"
    },
    {
      "cve": "CVE-2021-22923",
      "cwe": {
        "id": "CWE-522",
        "name": "Insufficiently Protected Credentials"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl is instructed to get content using the metalink feature, and a user name and password are used to download the metalink XML file, those same credentials are then subsequently passed on to each of the servers from which curl will download or try to download the contents from. Often contrary to the user\u0027s expectations and intentions and without telling the user it happened.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-22923"
    },
    {
      "cve": "CVE-2021-22924",
      "cwe": {
        "id": "CWE-706",
        "name": "Use of Incorrectly-Resolved Name or Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl keeps previously used connections in a connection pool for subsequent transfers to reuse, if one of them matches the setup. Due to errors in the logic, the config matching function did not take \u0027issuercert\u0027 into account and it compared the involved paths *case insensitively*, which could lead to libcurl reusing wrong connections. File paths are, or can be, case sensitive on many systems but not all, and can even vary depending on used file systems. The comparison also didn\u0027t include the \u0027issuer cert\u0027 which a transfer can set to qualify how to verify the server certificate.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-22924"
    },
    {
      "cve": "CVE-2021-22925",
      "cwe": {
        "id": "CWE-908",
        "name": "Use of Uninitialized Resource"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl supports the `-t` command line option, known as `CURLOPT_TELNETOPTIONS` in libcurl. This rarely used option is used to send variable=content pairs to TELNET servers. Due to flaw in the option parser for sending `NEW_ENV` variables, libcurl could be made to pass on uninitialized data from a stack based buffer to the server. Therefore potentially revealing sensitive internal information to the server using a clear-text network protocol. This could happen because curl did not call and use sscanf() correctly when parsing the string provided by the application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-22925"
    },
    {
      "cve": "CVE-2021-22926",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl-using applications can ask for a specific client certificate to be used in a transfer. This is done with the `CURLOPT_SSLCERT` option (`--cert` with the command line tool).When libcurl is built to use the macOS native TLS library Secure Transport, an application can ask for the client certificate by name or with a file name - using the same option. If the name exists as a file, it will be used instead of by name.If the appliction runs with a current working directory that is writable by other users (like `/tmp`), a malicious user can create a file name with the same name as the app wants to use by name, and thereby trick the application to use the file based cert instead of the one referred to by name making libcurl send the wrong client certificate in the TLS connection handshake.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-22926"
    },
    {
      "cve": "CVE-2021-22945",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When sending data to an MQTT server, libcurl \u003c= 7.73.0 and 7.78.0 could in some circumstances erroneously keep a pointer to an already freed memory area and both use that again in a subsequent call to send data and also free it *again*.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-22945"
    },
    {
      "cve": "CVE-2021-22946",
      "cwe": {
        "id": "CWE-319",
        "name": "Cleartext Transmission of Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A user can tell curl \u003e= 7.20.0 and \u003c= 7.78.0 to require a successful upgrade to TLS when speaking to an IMAP, POP3 or FTP server (`--ssl-reqd` on the command line or`CURLOPT_USE_SSL` set to `CURLUSESSL_CONTROL` or `CURLUSESSL_ALL` withlibcurl). This requirement could be bypassed if the server would return a properly crafted but perfectly legitimate response.This flaw would then make curl silently continue its operations **withoutTLS** contrary to the instructions and expectations, exposing possibly sensitive data in clear text over the network.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-22946"
    },
    {
      "cve": "CVE-2021-22947",
      "cwe": {
        "id": "CWE-345",
        "name": "Insufficient Verification of Data Authenticity"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl \u003e= 7.20.0 and \u003c= 7.78.0 connects to an IMAP or POP3 server to retrieve data using STARTTLS to upgrade to TLS security, the server can respond and send back multiple responses at once that curl caches. curl would then upgrade to TLS but not flush the in-queue of cached responses but instead continue using and trustingthe responses it got *before* the TLS handshake as if they were authenticated.Using this flaw, it allows a Man-In-The-Middle attacker to first inject the fake responses, then pass-through the TLS traffic from the legitimate server and trick curl into sending data back to the user thinking the attacker\u0027s injected data comes from the TLS-protected server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-22947"
    },
    {
      "cve": "CVE-2021-23336",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The package python/cpython from 0 and before 3.6.13, from 3.7.0 and before 3.7.10, from 3.8.0 and before 3.8.8, from 3.9.0 and before 3.9.2 are vulnerable to Web Cache Poisoning via urllib.parse.parse_qsl and urllib.parse.parse_qs by using a vector called parameter cloaking. When the attacker can separate query parameters using a semicolon (;), they can cause a difference in the interpretation of the request between the proxy (running with default configuration) and the server. This can result in malicious requests being cached as completely safe ones, as the proxy would usually not see the semicolon as a separator, and therefore would not include it in a cache key of an unkeyed parameter.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:N/I:L/A:H/E:P/RL:U/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-23336"
    },
    {
      "cve": "CVE-2021-27212",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In OpenLDAP through 2.4.57 and 2.5.x through 2.5.1alpha, an assertion failure in slapd can occur in the issuerAndThisUpdateCheck function via a crafted packet, resulting in a denial of service (daemon exit) via a short timestamp. This is related to schema_init.c and checkTime.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-27212"
    },
    {
      "cve": "CVE-2021-27218",
      "cwe": {
        "id": "CWE-681",
        "name": "Incorrect Conversion between Numeric Types"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in GNOME GLib before 2.66.7 and 2.67.x before 2.67.4. If g_byte_array_new_take() was called with a buffer of 4GB or more on a 64-bit platform, the length would be truncated modulo 2**32, causing unintended length truncation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-27218"
    },
    {
      "cve": "CVE-2021-27219",
      "cwe": {
        "id": "CWE-681",
        "name": "Incorrect Conversion between Numeric Types"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in GNOME GLib before 2.66.6 and 2.67.x before 2.67.3. The function g_bytes_new has an integer overflow on 64-bit platforms due to an implicit cast from 64 bits to 32 bits. The overflow could potentially lead to memory corruption.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-27219"
    },
    {
      "cve": "CVE-2021-27645",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The nameserver caching daemon (nscd) in the GNU C Library (aka glibc or libc6) 2.29 through 2.33, when processing a request for netgroup lookup, may crash due to a double-free, potentially resulting in degraded service or Denial of Service on the local system. This is related to netgroupcache.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 2.5,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-27645"
    },
    {
      "cve": "CVE-2021-28041",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ssh-agent in OpenSSH before 8.5 has a double free that may be relevant in a few less-common scenarios, such as unconstrained agent-socket access on a legacy operating system, or the forwarding of an agent to an attacker-controlled host.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:L/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-28041"
    },
    {
      "cve": "CVE-2021-28153",
      "cwe": {
        "id": "CWE-59",
        "name": "Improper Link Resolution Before File Access (\u0027Link Following\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in GNOME GLib before 2.66.8. When g_file_replace() is used with G_FILE_CREATE_REPLACE_DESTINATION to replace a path that is a dangling symlink, it incorrectly also creates the target of the symlink as an empty file, which could conceivably have security relevance if the symlink is attacker-controlled. (If the path is a symlink to a file that already exists, then the contents of that file correctly remain unchanged.)",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-28153"
    },
    {
      "cve": "CVE-2021-28363",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The urllib3 library 1.26.x before 1.26.4 for Python omits SSL certificate validation in some cases involving HTTPS to HTTPS proxies. The initial connection to the HTTPS proxy (if an SSLContext isn\u0027t given via proxy_config) doesn\u0027t verify the hostname of the certificate. This means certificates for different servers that still validate properly with the default urllib3 SSLContext will be silently accepted.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-28363"
    },
    {
      "cve": "CVE-2021-28861",
      "cwe": {
        "id": "CWE-601",
        "name": "URL Redirection to Untrusted Site (\u0027Open Redirect\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Python 3.x through 3.10 has an open redirection vulnerability in lib/http/server.py due to no protection against multiple (/) at the beginning of URI path which may leads to information disclosure. NOTE: this is disputed by a third party because the http.server.html documentation page states \"Warning: http.server is not recommended for production. It only implements basic security checks.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-28861"
    },
    {
      "cve": "CVE-2021-31239",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue found in SQLite SQLite3 v.3.35.4 that could allow a remote attacker to cause a denial of service via the appendvfs.c function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-31239"
    },
    {
      "cve": "CVE-2021-32292",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in json-c from 20200420 (post 0.14 unreleased code) through 0.15-20200726. A stack-buffer-overflow exists in the auxiliary sample program json_parse which is located in the function parseit.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-32292"
    },
    {
      "cve": "CVE-2021-33294",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In elfutils 0.183, an infinite loop was found in the function handle_symtab in readelf.c .Which allows attackers to cause a denial of service (infinite loop) via crafted file.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-33294"
    },
    {
      "cve": "CVE-2021-33560",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Libgcrypt before 1.8.8 and 1.9.x before 1.9.3 mishandles ElGamal encryption because it lacks exponent blinding to address a side-channel attack against mpi_powm, and the window size is not chosen appropriately. This, for example, affects use of ElGamal in OpenPGP.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-33560"
    },
    {
      "cve": "CVE-2021-33574",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The mq_notify function in the GNU C Library (aka glibc) versions 2.32 and 2.33 has a use-after-free. It may use the notification thread attributes object (passed through its struct sigevent parameter) after it has been freed by the caller, leading to a denial of service (application crash) or possibly unspecified other impact.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-33574"
    },
    {
      "cve": "CVE-2021-33910",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The use of alloca function with an uncontrolled size in function unit_name_path_escape allows a local attacker, able to mount a filesystem on a very long path, to crash systemd and the whole system by allocating a very large space in the stack.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-33910"
    },
    {
      "cve": "CVE-2021-35942",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The wordexp function in the GNU C Library (aka glibc) through 2.33 may crash or read arbitrary memory in parse_param (in posix/wordexp.c) when called with an untrusted, crafted pattern, potentially resulting in a denial of service or disclosure of information. This occurs because atoi was used but strtoul should have been used to ensure correct calculations.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-35942"
    },
    {
      "cve": "CVE-2021-36084",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The CIL compiler in SELinux 3.2 has a use-after-free in __cil_verify_classperms (called from __cil_verify_classpermission and __cil_pre_verify_helper).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-36084"
    },
    {
      "cve": "CVE-2021-36085",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The CIL compiler in SELinux 3.2 has a use-after-free in __cil_verify_classperms (called from __verify_map_perm_classperms and hashtab_map).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-36085"
    },
    {
      "cve": "CVE-2021-36086",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The CIL compiler in SELinux 3.2 has a use-after-free in cil_reset_classpermission (called from cil_reset_classperms_set and cil_reset_classperms_list).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-36086"
    },
    {
      "cve": "CVE-2021-36087",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The CIL compiler in SELinux 3.2 has a heap-based buffer over-read in ebitmap_match_any (called indirectly from cil_check_neverallow). This occurs because there is sometimes a lack of checks for invalid statements in an optional block.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-36087"
    },
    {
      "cve": "CVE-2021-36222",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ec_verify in kdc/kdc_preauth_ec.c in the Key Distribution Center (KDC) in MIT Kerberos 5 (aka krb5) before 1.18.4 and 1.19.x before 1.19.2 allows remote attackers to cause a NULL pointer dereference and daemon crash. This occurs because a return value is not properly managed in a certain situation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-36222"
    },
    {
      "cve": "CVE-2021-36690",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A segmentation fault can occur in the sqlite3.exe command-line component of SQLite 3.36.0 via the idxGetTableInfo function when there is a crafted SQL query. NOTE: the vendor disputes the relevance of this report because a sqlite3.exe user already has full privileges (e.g., is intentionally allowed to execute commands). This report does NOT imply any problem in the SQLite library.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-36690"
    },
    {
      "cve": "CVE-2021-37600",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An integer overflow in util-linux through 2.37.1 can potentially cause a buffer overflow if an attacker were able to use system resources in a way that leads to a large number in the /proc/sysvipc/sem file. NOTE: this is unexploitable in GNU C Library environments, and possibly in all realistic environments",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-37600"
    },
    {
      "cve": "CVE-2021-37750",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The Key Distribution Center (KDC) in MIT Kerberos 5 (aka krb5) before 1.18.5 and 1.19.x before 1.19.3 has a NULL pointer dereference in kdc/do_tgs_req.c via a FAST inner body that lacks a server field.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-37750"
    },
    {
      "cve": "CVE-2021-38604",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In librt in the GNU C Library (aka glibc) through 2.34, sysdeps/unix/sysv/linux/mq_notify.c mishandles certain NOTIFY_REMOVED data, leading to a NULL pointer dereference. NOTE: this vulnerability was introduced as a side effect of the CVE-2021-33574 fix.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-38604"
    },
    {
      "cve": "CVE-2021-41617",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "sshd in OpenSSH 6.2 through 8.x before 8.8, when certain non-default configurations are used, allows privilege escalation because supplemental groups are not initialized as expected. Helper programs for AuthorizedKeysCommand and AuthorizedPrincipalsCommand may run with privileges associated with group memberships of the sshd process, if the configuration specifies running the command as a different user.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-41617"
    },
    {
      "cve": "CVE-2021-43396",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "** DISPUTED ** In iconvdata/iso-2022-jp-3.c in the GNU C Library (aka glibc) 2.34, remote attackers can force iconv() to emit a spurious \u0027\\0\u0027 character via crafted ISO-2022-JP-3 data that is accompanied by an internal state reset. This may affect data integrity in certain iconv() use cases. NOTE: the vendor states \"the bug cannot be invoked through user input and requires iconv to be invoked with a NULL inbuf, which ought to require a separate application bug to do so unintentionally. Hence there\u0027s no security impact to the bug.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-43396"
    },
    {
      "cve": "CVE-2021-43618",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU Multiple Precision Arithmetic Library (GMP) through 6.2.1 has an mpz/inp_raw.c integer overflow and resultant buffer overflow via crafted input, leading to a segmentation fault on 32-bit platforms.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-43618"
    },
    {
      "cve": "CVE-2021-44879",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In gc_data_segment in fs/f2fs/gc.c in the Linux kernel before 5.16.3, special files are not considered, leading to a move_data_page NULL pointer dereference.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-44879"
    },
    {
      "cve": "CVE-2021-45960",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Expat (aka libexpat) before 2.4.3, a left shift by 29 (or more) places in the storeAtts function in xmlparse.c can lead to realloc misbehavior (e.g., allocating too few bytes, or only freeing memory).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-45960"
    },
    {
      "cve": "CVE-2021-46143",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In doProlog in xmlparse.c in Expat (aka libexpat) before 2.4.3, an integer overflow exists for m_groupSize.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-46143"
    },
    {
      "cve": "CVE-2021-46195",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GCC v12.0 was discovered to contain an uncontrolled recursion via the component libiberty/rust-demangle.c. This vulnerability allows attackers to cause a Denial of Service (DoS) by consuming excessive CPU and memory resources.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-46195"
    },
    {
      "cve": "CVE-2021-46828",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libtirpc before 1.3.3rc1, remote attackers could exhaust the file descriptors of a process that uses libtirpc because idle TCP connections are mishandled. This can, in turn, lead to an svc_run infinite loop without accepting new connections.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-46828"
    },
    {
      "cve": "CVE-2021-46848",
      "cwe": {
        "id": "CWE-193",
        "name": "Off-by-one Error"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU Libtasn1 before 4.19.0 has an ETYPE_OK off-by-one array size check that affects asn1_encode_simple_der.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2021-46848"
    },
    {
      "cve": "CVE-2022-0391",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in Python, specifically within the urllib.parse module. This module helps break Uniform Resource Locator (URL) strings into components. The issue involves how the urlparse method does not sanitize input and allows characters like \u0027\\r\u0027 and \u0027\\n\u0027 in the URL path. This flaw allows an attacker to input a crafted URL, leading to injection attacks. This flaw affects Python versions prior to 3.10.0b1, 3.9.5, 3.8.11, 3.7.11 and 3.6.14.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-0391"
    },
    {
      "cve": "CVE-2022-0563",
      "cwe": {
        "id": "CWE-209",
        "name": "Generation of Error Message Containing Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the util-linux chfn and chsh utilities when compiled with Readline support. The Readline library uses an \"INPUTRC\" environment variable to get a path to the library config file. When the library cannot parse the specified file, it prints an error message containing data from the file. This flaw allows an unprivileged user to read root-owned files, potentially leading to privilege escalation. This flaw affects util-linux versions prior to 2.37.4.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-0563"
    },
    {
      "cve": "CVE-2022-0778",
      "cwe": {
        "id": "CWE-835",
        "name": "Loop with Unreachable Exit Condition (\u0027Infinite Loop\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The BN_mod_sqrt() function in openSSL, which computes a modular square root, contains a bug that can cause it to loop forever for non-prime moduli. Internally this function is used when parsing certificates that contain elliptic curve public keys in compressed form or explicit elliptic curve parameters with a base point encoded in compressed form. It is possible to trigger the infinite loop by crafting a certificate that has invalid explicit curve parameters. Since certificate parsing happens prior to verification of the certificate signature, any process that parses an externally supplied certificate may thus be subject to a denial of service attack. The infinite loop can also be reached when parsing crafted private keys as they can contain explicit elliptic curve parameters.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-0778"
    },
    {
      "cve": "CVE-2022-1271",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An arbitrary file write vulnerability was found in GNU gzip\u0027s zgrep utility. When zgrep is applied on the attacker\u0027s chosen file name (for example, a crafted file name), this can overwrite an attacker\u0027s content to an arbitrary attacker-selected file. This flaw occurs due to insufficient validation when processing filenames with two or more newlines where selected content and the target file names are embedded in crafted multi-line file names. This flaw allows a remote, low privileged attacker to force zgrep to write arbitrary files on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-1271"
    },
    {
      "cve": "CVE-2022-1292",
      "cwe": {
        "id": "CWE-78",
        "name": "Improper Neutralization of Special Elements used in an OS Command (\u0027OS Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The c_rehash script does not properly sanitise shell metacharacters to prevent command injection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-1292"
    },
    {
      "cve": "CVE-2022-1304",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds read/write vulnerability was found in e2fsprogs 1.46.5. This issue leads to a segmentation fault and possibly arbitrary code execution via a specially crafted filesystem.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-1304"
    },
    {
      "cve": "CVE-2022-1343",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Under certain circumstances, the command line OCSP verify function reports successful verification when the verification in fact failed. In this case the incorrect successful response will also be accompanied by error messages showing the failure and contradicting the apparently successful result.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-1343"
    },
    {
      "cve": "CVE-2022-1434",
      "cwe": {
        "id": "CWE-327",
        "name": "Use of a Broken or Risky Cryptographic Algorithm"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When using the RC4-MD5 ciphersuite, which is disabled by default, an attacker is able to modify data in transit due to an incorrect use of the AAD data as the MAC key in OpenSSL 3.0. An attacker is not able to decrypt any communication.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-1434"
    },
    {
      "cve": "CVE-2022-1473",
      "cwe": {
        "id": "CWE-404",
        "name": "Improper Resource Shutdown or Release"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The used OpenSSL version improperly reuses memory when decoding certificates or keys. This can lead to a process termination and Denial of Service for long lived processes.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-1473"
    },
    {
      "cve": "CVE-2022-2068",
      "cwe": {
        "id": "CWE-78",
        "name": "Improper Neutralization of Special Elements used in an OS Command (\u0027OS Command Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In addition to the c_rehash shell command injection identified in CVE-2022-1292, further circumstances where the c_rehash script does not properly sanitise shell metacharacters to prevent command injection were found by code review. When the CVE-2022-1292 was fixed it was not discovered that there are other places in the script where the file names of certificates being hashed were possibly passed to a command executed through the shell. This script is distributed by some operating systems in a manner where it is automatically executed. On such operating systems, an attacker could execute arbitrary commands with the privileges of the script. Use of the c_rehash script is considered obsolete and should be replaced by the OpenSSL rehash command line tool.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-2068"
    },
    {
      "cve": "CVE-2022-2097",
      "cwe": {
        "id": "CWE-326",
        "name": "Inadequate Encryption Strength"
      },
      "notes": [
        {
          "category": "summary",
          "text": "AES OCB mode for 32-bit x86 platforms using the AES-NI assembly optimised implementation will not encrypt the entirety of the data under some circumstances. This could reveal sixteen bytes of data that was preexisting in the memory that wasn\u0027t written. In the special case of \"in place\" encryption, sixteen bytes of the plaintext would be revealed. Since OpenSSL does not support OCB based cipher suites for TLS and DTLS, they are both unaffected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-2097"
    },
    {
      "cve": "CVE-2022-2274",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The OpenSSL 3.0.4 release introduced a serious bug in the RSA implementation for X86_64 CPUs supporting the AVX512IFMA instructions. This issue makes the RSA implementation with 2048 bit private keys incorrect on such machines and memory corruption will happen during the computation. As a consequence of the memory corruption an attacker may be able to trigger a remote code execution on the machine performing the computation. SSL/TLS servers or other servers using 2048 bit RSA private keys running on machines supporting AVX512IFMA instructions of the X86_64 architecture are affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-2274"
    },
    {
      "cve": "CVE-2022-2509",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability found in gnutls. This security flaw happens because of a double free error occurs during verification of pkcs7 signatures in gnutls_pkcs7_verify function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-2509"
    },
    {
      "cve": "CVE-2022-3715",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the bash package, where a heap-buffer overflow can occur in valid parameter_transform. This issue may lead to memory problems.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-3715"
    },
    {
      "cve": "CVE-2022-3821",
      "cwe": {
        "id": "CWE-193",
        "name": "Off-by-one Error"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An off-by-one Error issue was discovered in Systemd in format_timespan() function of time-util.c. An attacker could supply specific values for time and accuracy that leads to buffer overrun in format_timespan(), leading to a Denial of Service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-3821"
    },
    {
      "cve": "CVE-2022-4304",
      "cwe": {
        "id": "CWE-326",
        "name": "Inadequate Encryption Strength"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A timing based side channel exists in the OpenSSL RSA Decryption implementation which could be sufficient to recover a plaintext across a network in a Bleichenbacher style attack. To achieve a successful decryption an attacker would have to be able to send a very large number of trial messages for decryption. The vulnerability affects all RSA padding modes: PKCS#1 v1.5, RSA-OEAP and RSASVE. For example, in a TLS connection, RSA is commonly used by a client to send an encrypted pre-master secret to the server. An attacker that had observed a genuine connection between a client and a server could use this flaw to send trial messages to the server and record the time taken to process them. After a sufficiently large number of messages the attacker could recover the pre-master secret used for the original connection and thus be able to decrypt the application data sent over that connection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-4304"
    },
    {
      "cve": "CVE-2022-4450",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The function PEM_read_bio_ex() reads a PEM file from a BIO and parses and decodes the \"name\" (e.g. \"CERTIFICATE\"), any header data and the payload data. If the function succeeds then the \"name_out\", \"header\" and \"data\" arguments are populated with pointers to buffers containing the relevant decoded data. The caller is responsible for freeing those buffers. It is possible to construct a PEM file that results in 0 bytes of payload data. In this case PEM_read_bio_ex() will return a failure code but will populate the header argument with a pointer to a buffer that has already been freed. If the caller also frees this buffer then a double free will occur. This will most likely lead to a crash. This could be exploited by an attacker who has the ability to supply malicious PEM files for parsing to achieve a denial of service attack. The functions PEM_read_bio() and PEM_read() are simple wrappers around PEM_read_bio_ex() and therefore these functions are also directly affected. These functions are also called indirectly by a number of other OpenSSL functions including PEM_X509_INFO_read_bio_ex() and SSL_CTX_use_serverinfo_file() which are also vulnerable. Some OpenSSL internal uses of these functions are not vulnerable because the caller does not free the header argument if PEM_read_bio_ex() returns a failure code. These locations include the PEM_read_bio_TYPE() functions as well as the decoders introduced in OpenSSL 3.0. The OpenSSL asn1parse command line application is also impacted by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-4450"
    },
    {
      "cve": "CVE-2022-22576",
      "cwe": {
        "id": "CWE-287",
        "name": "Improper Authentication"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An improper authentication vulnerability exists in curl 7.33.0 to and including 7.82.0 which might allow reuse OAUTH2-authenticated connections without properly making sure that the connection was authenticated with the same credentials as set for this transfer. This affects SASL-enabled protocols: SMPTP(S), IMAP(S), POP3(S) and LDAP(S) (openldap only).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-22576"
    },
    {
      "cve": "CVE-2022-22822",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "addBinding in xmlparse.c in Expat (aka libexpat) before 2.4.3 has an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-22822"
    },
    {
      "cve": "CVE-2022-22823",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "build_model in xmlparse.c in Expat (aka libexpat) before 2.4.3 has an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-22823"
    },
    {
      "cve": "CVE-2022-22824",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "defineAttribute in xmlparse.c in Expat (aka libexpat) before 2.4.3 has an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-22824"
    },
    {
      "cve": "CVE-2022-22825",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "lookup in xmlparse.c in Expat (aka libexpat) before 2.4.3 has an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-22825"
    },
    {
      "cve": "CVE-2022-22826",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nextScaffoldPart in xmlparse.c in Expat (aka libexpat) before 2.4.3 has an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-22826"
    },
    {
      "cve": "CVE-2022-22827",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "storeAtts in xmlparse.c in Expat (aka libexpat) before 2.4.3 has an integer overflow.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-22827"
    },
    {
      "cve": "CVE-2022-23218",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The deprecated compatibility function svcunix_create in the sunrpc module of the GNU C Library (aka glibc) through 2.34 copies its path argument on the stack without validating its length, which may result in a buffer overflow, potentially resulting in a denial of service or (if an application is not built with a stack protector enabled) arbitrary code execution.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-23218"
    },
    {
      "cve": "CVE-2022-23219",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The deprecated compatibility function clnt_create in the sunrpc module of the GNU C Library (aka glibc) through 2.34 copies its hostname argument on the stack without validating its length, which may result in a buffer overflow, potentially resulting in a denial of service or (if an application is not built with a stack protector enabled) arbitrary code execution.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-23219"
    },
    {
      "cve": "CVE-2022-23308",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "valid.c in libxml2 before 2.9.13 has a use-after-free of ID and IDREF attributes.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-23308"
    },
    {
      "cve": "CVE-2022-23852",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Expat (aka libexpat) before 2.4.4 has a signed integer overflow in XML_GetBuffer, for configurations with a nonzero XML_CONTEXT_BYTES.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-23852"
    },
    {
      "cve": "CVE-2022-23990",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Expat (aka libexpat) before 2.4.4 has an integer overflow in the doProlog function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-23990"
    },
    {
      "cve": "CVE-2022-24407",
      "cwe": {
        "id": "CWE-89",
        "name": "Improper Neutralization of Special Elements used in an SQL Command (\u0027SQL Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Cyrus SASL 2.1.17 through 2.1.27 before 2.1.28, plugins/sql.c does not escape the password for a SQL INSERT or UPDATE statement.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-24407"
    },
    {
      "cve": "CVE-2022-25235",
      "cwe": {
        "id": "CWE-116",
        "name": "Improper Encoding or Escaping of Output"
      },
      "notes": [
        {
          "category": "summary",
          "text": "xmltok_impl.c in Expat (aka libexpat) before 2.4.5 lacks certain validation of encoding, such as checks for whether a UTF-8 character is valid in a certain context.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-25235"
    },
    {
      "cve": "CVE-2022-25236",
      "cwe": {
        "id": "CWE-668",
        "name": "Exposure of Resource to Wrong Sphere"
      },
      "notes": [
        {
          "category": "summary",
          "text": "xmlparse.c in Expat (aka libexpat) before 2.4.5 allows attackers to insert namespace-separator characters into namespace URIs.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-25236"
    },
    {
      "cve": "CVE-2022-25313",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Expat (aka libexpat) before 2.4.5, an attacker can trigger stack exhaustion in build_model via a large nesting depth in the DTD element.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-25313"
    },
    {
      "cve": "CVE-2022-25314",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Expat (aka libexpat) before 2.4.5, there is an integer overflow in copyString.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-25314"
    },
    {
      "cve": "CVE-2022-25315",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Expat (aka libexpat) before 2.4.5, there is an integer overflow in storeRawNames.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-25315"
    },
    {
      "cve": "CVE-2022-26488",
      "cwe": {
        "id": "CWE-426",
        "name": "Untrusted Search Path"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Python before 3.10.3 on Windows, local users can gain privileges because the search path is inadequately secured. The installer may allow a local attacker to add user-writable directories to the system search path. To exploit, an administrator must have installed Python for all users and enabled PATH entries. A non-administrative user can trigger a repair that incorrectly adds user-writable paths into PATH, enabling search-path hijacking of other users and system services. This affects Python (CPython) through 3.7.12, 3.8.x through 3.8.12, 3.9.x through 3.9.10, and 3.10.x through 3.10.2.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-26488"
    },
    {
      "cve": "CVE-2022-27774",
      "cwe": {
        "id": "CWE-522",
        "name": "Insufficiently Protected Credentials"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with authentication could leak credentials to other services that exist on different protocols or port numbers.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:R/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-27774"
    },
    {
      "cve": "CVE-2022-27775",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An information disclosure vulnerability exists in curl 7.65.0 to 7.82.0 are vulnerable that by using an IPv6 address that was in the connection pool but with a different zone id it could reuse a connection instead.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-27775"
    },
    {
      "cve": "CVE-2022-27776",
      "cwe": {
        "id": "CWE-522",
        "name": "Insufficiently Protected Credentials"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A insufficiently protected credentials vulnerability in fixed in curl 7.83.0 might leak authentication or cookie header data on HTTP redirects to the same host but another port number.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-27776"
    },
    {
      "cve": "CVE-2022-27778",
      "cwe": {
        "id": "CWE-706",
        "name": "Use of Incorrectly-Resolved Name or Reference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use of incorrectly resolved name vulnerability fixed in 7.83.1 might remove the wrong file when `--no-clobber` is used together with `--remove-on-error`.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-27778"
    },
    {
      "cve": "CVE-2022-27779",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl wrongly allows cookies to be set for Top Level Domains (TLDs) if thehost name is provided with a trailing dot.curl can be told to receive and send cookies. curl\u0027s \"cookie engine\" can bebuilt with or without [Public Suffix List](https://publicsuffix.org/)awareness. If PSL support not provided, a more rudimentary check exists to atleast prevent cookies from being set on TLDs. This check was broken if thehost name in the URL uses a trailing dot.This can allow arbitrary sites to set cookies that then would get sent to adifferent and unrelated site or domain.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-27779"
    },
    {
      "cve": "CVE-2022-27780",
      "cwe": {
        "id": "CWE-918",
        "name": "Server-Side Request Forgery (SSRF)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The curl URL parser wrongly accepts percent-encoded URL separators like \u0027/\u0027when decoding the host name part of a URL, making it a *different* URL usingthe wrong host name when it is later retrieved.For example, a URL like `http://example.com%2F127.0.0.1/`, would be allowed bythe parser and get transposed into `http://example.com/127.0.0.1/`. This flawcan be used to circumvent filters, checks and more.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-27780"
    },
    {
      "cve": "CVE-2022-27781",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl provides the `CURLOPT_CERTINFO` option to allow applications torequest details to be returned about a server\u0027s certificate chain.Due to an erroneous function, a malicious server could make libcurl built withNSS get stuck in a never-ending busy-loop when trying to retrieve thatinformation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-27781"
    },
    {
      "cve": "CVE-2022-27782",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl would reuse a previously created connection even when a TLS or SSHrelated option had been changed that should have prohibited reuse.libcurl keeps previously used connections in a connection pool for subsequenttransfers to reuse if one of them matches the setup. However, several TLS andSSH settings were left out from the configuration match checks, making themmatch too easily.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-27782"
    },
    {
      "cve": "CVE-2022-27943",
      "cwe": {
        "id": "CWE-674",
        "name": "Uncontrolled Recursion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libiberty/rust-demangle.c in GNU GCC 11.2 allows stack consumption in demangle_const, as demonstrated by nm-new.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-27943"
    },
    {
      "cve": "CVE-2022-28321",
      "cwe": {
        "id": "CWE-287",
        "name": "Improper Authentication"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The Linux-PAM package before 1.5.2-6.1 for openSUSE Tumbleweed allows authentication bypass for SSH logins. The pam_access.so module doesn\u0027t correctly restrict login if a user tries to connect from an IP address that is not resolvable via DNS. In such conditions, a user with denied access to a machine can still get access. NOTE: the relevance of this issue is largely limited to openSUSE Tumbleweed and openSUSE Factory; it does not affect Linux-PAM upstream.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-28321"
    },
    {
      "cve": "CVE-2022-29155",
      "cwe": {
        "id": "CWE-89",
        "name": "Improper Neutralization of Special Elements used in an SQL Command (\u0027SQL Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In OpenLDAP 2.x before 2.5.12 and 2.6.x before 2.6.2, a SQL injection vulnerability exists in the experimental back-sql backend to slapd, via a SQL statement within an LDAP query. This can occur during an LDAP search operation when the search filter is processed, due to a lack of proper escaping.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-29155"
    },
    {
      "cve": "CVE-2022-29824",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libxml2 before 2.9.14, several buffer handling functions in buf.c (xmlBuf*) and tree.c (xmlBuffer*) don\u0027t check for integer overflows. This can result in out-of-bounds memory writes. Exploitation requires a victim to open a crafted, multi-gigabyte XML file. Other software using libxml2\u0027s buffer functions, for example libxslt through 1.1.35, is affected as well.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-29824"
    },
    {
      "cve": "CVE-2022-30115",
      "cwe": {
        "id": "CWE-319",
        "name": "Cleartext Transmission of Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Using its HSTS support, curl can be instructed to use HTTPS directly insteadof using an insecure clear-text HTTP step even when HTTP is provided in theURL. This mechanism could be bypassed if the host name in the given URL used atrailing dot while not using one when it built the HSTS cache. Or the otherway around - by having the trailing dot in the HSTS cache and *not* using thetrailing dot in the URL.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-30115"
    },
    {
      "cve": "CVE-2022-32205",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A malicious server can serve excessive amounts of \"Set-Cookie:\" headers in a HTTP response to curl and curl \u003c 7.84.0 stores all of them. A sufficiently large amount of (big) cookies make subsequent HTTP requests to this, or other servers to which the cookies match, create requests that become larger than the threshold that curl uses internally to avoid sending crazy large requests (1048576 bytes) and instead returns an error.This denial state might remain for as long as the same cookies are kept, match and haven\u0027t expired. Due to cookie matching rules, a server on \"foo.example.com\" can set cookies that also would match for \"bar.example.com\", making it it possible for a \"sister server\" to effectively cause a denial of service for a sibling site on the same second level domain using this method.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-32205"
    },
    {
      "cve": "CVE-2022-32206",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl \u003c 7.84.0 supports \"chained\" HTTP compression algorithms, meaning that a serverresponse can be compressed multiple times and potentially with different algorithms. The number of acceptable \"links\" in this \"decompression chain\" was unbounded, allowing a malicious server to insert a virtually unlimited number of compression steps.The use of such a decompression chain could result in a \"malloc bomb\", makingcurl end up spending enormous amounts of allocated heap memory, or trying toand returning out of memory errors.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-32206"
    },
    {
      "cve": "CVE-2022-32207",
      "cwe": {
        "id": "CWE-276",
        "name": "Incorrect Default Permissions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl \u003c 7.84.0 saves cookies, alt-svc and hsts data to local files, it makes the operation atomic by finalizing the operation with a rename from a temporary name to the final target file name.In that rename operation, it might accidentally *widen* the permissions for the target file, leaving the updated file accessible to more users than intended.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-32207"
    },
    {
      "cve": "CVE-2022-32208",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl \u003c 7.84.0 does FTP transfers secured by krb5, it handles message verification failures wrongly. This flaw makes it possible for a Man-In-The-Middle attack to go unnoticed and even allows it to inject data to the client.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-32208"
    },
    {
      "cve": "CVE-2022-32221",
      "cwe": {
        "id": "CWE-440",
        "name": "Expected Behavior Violation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When doing HTTP(S) transfers, libcurl might erroneously use the read callback (`CURLOPT_READFUNCTION`) to ask for data to send, even when the `CURLOPT_POSTFIELDS` option has been set, if the same handle previously was used to issue a `PUT` request which used that callback. This flaw may surprise the application and cause it to misbehave and either send off the wrong data or use memory after free or similar in the subsequent `POST` request. The problem exists in the logic for a reused handle when it is changed from a PUT to a POST.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.2,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-32221"
    },
    {
      "cve": "CVE-2022-35252",
      "cwe": {
        "id": "CWE-1286",
        "name": "Improper Validation of Syntactic Correctness of Input"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl is used to retrieve and parse cookies from a HTTP(S) server, itaccepts cookies using control codes that when later are sent back to a HTTPserver might make the server return 400 responses. Effectively allowing a\"sister site\" to deny service to all siblings.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-35252"
    },
    {
      "cve": "CVE-2022-35260",
      "cwe": {
        "id": "CWE-121",
        "name": "Stack-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl can be told to parse a `.netrc` file for credentials. If that file endsin a line with 4095 consecutive non-white space letters and no newline, curlwould first read past the end of the stack-based buffer, and if the readworks, write a zero byte beyond its boundary.This will in most cases cause a segfault or similar, but circumstances might also cause different outcomes.If a malicious user can provide a custom netrc file to an application or otherwise affect its contents, this flaw could be used as denial-of-service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.6,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-35260"
    },
    {
      "cve": "CVE-2022-35737",
      "cwe": {
        "id": "CWE-129",
        "name": "Improper Validation of Array Index"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite 1.0.12 through 3.39.x before 3.39.2 sometimes allows an array-bounds overflow if billions of bytes are used in a string argument to a C API.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-35737"
    },
    {
      "cve": "CVE-2022-37434",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "zlib through 1.2.12 has a heap-based buffer over-read or buffer overflow in inflate in inflate.c via a large gzip header extra field. NOTE: only applications that call inflateGetHeader are affected. Some common applications bundle the affected zlib source code but may be unable to call inflateGetHeader (e.g., see the nodejs/node reference).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-37434"
    },
    {
      "cve": "CVE-2022-37454",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The Keccak XKCP SHA-3 reference implementation before fdc6fef has an integer overflow and resultant buffer overflow that allows attackers to execute arbitrary code or eliminate expected cryptographic properties. This occurs in the sponge function interface.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-37454"
    },
    {
      "cve": "CVE-2022-40303",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.10.3. When parsing a multi-gigabyte XML document with the XML_PARSE_HUGE parser option enabled, several integer counters can overflow. This results in an attempt to access an array at a negative 2GB offset, typically leading to a segmentation fault.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-40303"
    },
    {
      "cve": "CVE-2022-40304",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.10.3. Certain invalid XML entity definitions can corrupt a hash table key, potentially leading to subsequent logic errors. In one case, a double-free can be provoked.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-40304"
    },
    {
      "cve": "CVE-2022-40674",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libexpat before 2.4.9 has a use-after-free in the doContent function in xmlparse.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-40674"
    },
    {
      "cve": "CVE-2022-42898",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "PAC parsing in MIT Kerberos 5 (aka krb5) before 1.19.4 and 1.20.x before 1.20.1 has integer overflows that may lead to remote code execution (in KDC, kadmind, or a GSS or Kerberos application server) on 32-bit platforms (which have a resultant heap-based buffer overflow), and cause a denial of service on other platforms. This occurs in krb5_pac_parse in lib/krb5/krb/pac.c. Heimdal before 7.7.1 has \"a similar bug.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-42898"
    },
    {
      "cve": "CVE-2022-42915",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl before 7.86.0 has a double free. If curl is told to use an HTTP proxy for a transfer with a non-HTTP(S) URL, it sets up the connection to the remote server by issuing a CONNECT request to the proxy, and then tunnels the rest of the protocol through. An HTTP proxy might refuse this request (HTTP proxies often only allow outgoing connections to specific port numbers, like 443 for HTTPS) and instead return a non-200 status code to the client. Due to flaws in the error/cleanup handling, this could trigger a double free in curl if one of the following schemes were used in the URL for the transfer: dict, gopher, gophers, ldap, ldaps, rtmp, rtmps, or telnet. The earliest affected version is 7.77.0.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-42915"
    },
    {
      "cve": "CVE-2022-42916",
      "cwe": {
        "id": "CWE-319",
        "name": "Cleartext Transmission of Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In curl before 7.86.0, the HSTS check could be bypassed to trick it into staying with HTTP. Using its HSTS support, curl can be instructed to use HTTPS directly (instead of using an insecure cleartext HTTP step) even when HTTP is provided in the URL. This mechanism could be bypassed if the host name in the given URL uses IDN characters that get replaced with ASCII counterparts as part of the IDN conversion, e.g., using the character UTF-8 U+3002 (IDEOGRAPHIC FULL STOP) instead of the common ASCII full stop of U+002E (.). The earliest affected version is 7.77.0 2021-05-26.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-42916"
    },
    {
      "cve": "CVE-2022-43551",
      "cwe": {
        "id": "CWE-319",
        "name": "Cleartext Transmission of Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability exists in curl \u003c7.87.0 HSTS check that could be bypassed to trick it to keep using HTTP. Using its HSTS support, curl can be instructed to use HTTPS instead of using an insecure clear-text HTTP step even when HTTP is provided in the URL. However, the HSTS mechanism could be bypassed if the host name in the given URL first uses IDN characters that get replaced to ASCII counterparts as part of the IDN conversion. Like using the character UTF-8 U+3002 (IDEOGRAPHIC FULL STOP) instead of the common ASCII full stop U+002E (.). Then in a subsequent request, it does not detect the HSTS state and makes a clear text transfer. Because it would store the info IDN encoded but look for it IDN decoded.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-43551"
    },
    {
      "cve": "CVE-2022-43552",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "curl can be asked to tunnel virtually all protocols it supports through an HTTP proxy. HTTP proxies can (and often do) deny such tunnel operations using an appropriate HTTP error response code. When getting denied to tunnel the specific protocols SMB or TELNET, curl would use a heap-allocated struct after it had been freed, in its transfer shutdown code path.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-43552"
    },
    {
      "cve": "CVE-2022-43680",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libexpat through 2.4.9, there is a use-after free caused by overeager destruction of a shared DTD in XML_ExternalEntityParserCreate in out-of-memory situations.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-43680"
    },
    {
      "cve": "CVE-2022-45061",
      "cwe": {
        "id": "CWE-407",
        "name": "Inefficient Algorithmic Complexity"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in Python before 3.11.1. An unnecessary quadratic algorithm exists in one path when processing some inputs to the IDNA (RFC 3490) decoder, such that a crafted, unreasonably long name being presented to the decoder could lead to a CPU denial of service. Hostnames are often supplied by remote servers that could be controlled by a malicious actor; in such a scenario, they could trigger excessive CPU consumption on the client attempting to make use of an attacker-supplied supposed hostname. For example, the attack payload could be placed in the Location header of an HTTP response with status code 302. A fix is planned in 3.11.1, 3.10.9, 3.9.16, 3.8.16, and 3.7.16.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-45061"
    },
    {
      "cve": "CVE-2022-45873",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "systemd 250 and 251 allows local users to achieve a systemd-coredump deadlock by triggering a crash that has a long backtrace. This occurs in parse_elf_object in shared/elf-util.c. The exploitation methodology is to crash a binary calling the same function recursively, and put it in a deeply nested directory to make its backtrace large enough to cause the deadlock. This must be done 16 times when MaxConnections=16 is set for the systemd/units/systemd-coredump.socket file.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-45873"
    },
    {
      "cve": "CVE-2022-46908",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "SQLite through 3.40.0, when relying on --safe for execution of an untrusted CLI script, does not properly implement the azProhibitedFunctions protection mechanism, and instead allows UDF functions such as WRITEFILE.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.3,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-46908"
    },
    {
      "cve": "CVE-2022-48303",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU Tar through 1.34 has a one-byte out-of-bounds read that results in use of uninitialized memory for a conditional jump. Exploitation to change the flow of control has not been demonstrated. The issue occurs in from_header in list.c via a V7 archive in which mtime has approximately 11 whitespace characters.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-48303"
    },
    {
      "cve": "CVE-2022-48522",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Perl 5.34.0, function S_find_uninit_var in sv.c has a stack-based crash that can lead to remote code execution or local privilege escalation.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-48522"
    },
    {
      "cve": "CVE-2022-48560",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free exists in Python through 3.9 via heappushpop in heapq.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2022-48560"
    },
    {
      "cve": "CVE-2023-0215",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The public API function BIO_new_NDEF is a helper function used for streaming ASN.1 data via a BIO. It is primarily used internally to OpenSSL to support the SMIME, CMS and PKCS7 streaming capabilities, but may also be called directly by end user applications. The function receives a BIO from the caller, prepends a new BIO_f_asn1 filter BIO onto the front of it to form a BIO chain, and then returns the new head of the BIO chain to the caller. Under certain conditions, for example if a CMS recipient public key is invalid, the new filter BIO is freed and the function returns a NULL result indicating a failure. However, in this case, the BIO chain is not properly cleaned up and the BIO passed by the caller still retains internal pointers to the previously freed filter BIO. If the caller then goes on to call BIO_pop() on the BIO then a use-after-free will occur. This will most likely result in a crash. This scenario occurs directly in the internal function B64_write_ASN1() which may cause BIO_new_NDEF() to be called and will subsequently call BIO_pop() on the BIO. This internal function is in turn called by the public API functions PEM_write_bio_ASN1_stream, PEM_write_bio_CMS_stream, PEM_write_bio_PKCS7_stream, SMIME_write_ASN1, SMIME_write_CMS and SMIME_write_PKCS7. Other public API functions that may be impacted by this include i2d_ASN1_bio_stream, BIO_new_CMS, BIO_new_PKCS7, i2d_CMS_bio_stream and i2d_PKCS7_bio_stream. The OpenSSL cms and smime command line applications are similarly affected.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-0215"
    },
    {
      "cve": "CVE-2023-0286",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "There is a type confusion vulnerability relating to X.400 address processing inside an X.509 GeneralName. X.400 addresses were parsed as an ASN1_STRING but the public structure definition for GENERAL_NAME incorrectly specified the type of the x400Address field as ASN1_TYPE. This field is subsequently interpreted by the OpenSSL function GENERAL_NAME_cmp as an ASN1_TYPE rather than an ASN1_STRING. When CRL checking is enabled (i.e. the application sets the X509_V_FLAG_CRL_CHECK flag), this vulnerability may allow an attacker to pass arbitrary pointers to a memcmp call, enabling them to read memory contents or enact a denial of service. In most cases, the attack requires the attacker to provide both the certificate chain and CRL, neither of which need to have a valid signature. If the attacker only controls one of these inputs, the other input must already contain an X.400 address as a CRL distribution point, which is uncommon. As such, this vulnerability is most likely to only affect applications which have implemented their own functionality for retrieving CRLs over a network.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-0286"
    },
    {
      "cve": "CVE-2023-0361",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A timing side-channel in the handling of RSA ClientKeyExchange messages was discovered in GnuTLS. This side-channel can be sufficient to recover the key encrypted in the RSA ciphertext across a network in a Bleichenbacher style attack. To achieve a successful decryption the attacker would need to send a large amount of specially crafted messages to the vulnerable server. By recovering the secret from the ClientKeyExchange message, the attacker would be able to decrypt the application data exchanged over that connection.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-0361"
    },
    {
      "cve": "CVE-2023-0464",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A security vulnerability has been identified in all supported versions of OpenSSL related to the verification of X.509 certificate chains that include policy constraints. Attackers may be able to exploit this vulnerability by creating a malicious certificate chain that triggers exponential use of computational resources, leading to a denial-of-service (DoS) attack on affected systems.\r\n\r\nPolicy processing is disabled by default but can be enabled by passing the `-policy` argument to the command line utilities or by calling the `X509_VERIFY_PARAM_set1_policies()` function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-0464"
    },
    {
      "cve": "CVE-2023-0465",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Applications that use a non-default option when verifying certificates may be\r\nvulnerable to an attack from a malicious CA to circumvent certain checks.\r\n\r\nInvalid certificate policies in leaf certificates are silently ignored by\r\nOpenSSL and other certificate policy checks are skipped for that certificate.\r\nA malicious CA could use this to deliberately assert invalid certificate policies\r\nin order to circumvent policy checking on the certificate altogether.\r\n\r\nPolicy processing is disabled by default but can be enabled by passing\r\nthe `-policy` argument to the command line utilities or by calling the\r\n`X509_VERIFY_PARAM_set1_policies()` function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-0465"
    },
    {
      "cve": "CVE-2023-0466",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The function X509_VERIFY_PARAM_add0_policy() is documented to\nimplicitly enable the certificate policy check when doing certificate\nverification. However the implementation of the function does not\nenable the check which allows certificates with invalid or incorrect\npolicies to pass the certificate verification.\n\nAs suddenly enabling the policy check could break existing deployments it was\ndecided to keep the existing behavior of the X509_VERIFY_PARAM_add0_policy()\nfunction.\n\nInstead the applications that require OpenSSL to perform certificate\npolicy check need to use X509_VERIFY_PARAM_set1_policies() or explicitly\nenable the policy check by calling X509_VERIFY_PARAM_set_flags() with\nthe X509_V_FLAG_POLICY_CHECK flag argument.\n\nCertificate policy checks are disabled by default in OpenSSL and are not\ncommonly used by applications.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-0466"
    },
    {
      "cve": "CVE-2023-0687",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in GNU C Library 2.38. It has been declared as critical. This vulnerability affects the function __monstartup of the file gmon.c of the component Call Graph Monitor. The manipulation leads to buffer overflow. It is recommended to apply a patch to fix this issue. VDB-220246 is the identifier assigned to this vulnerability. NOTE: The real existence of this vulnerability is still doubted at the moment. The inputs that induce this vulnerability are basically addresses of the running application that is built with gmon enabled. It\u0027s basically trusted input or input that needs an actual security flaw to be compromised or controlled.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.6,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:A/AC:H/PR:L/UI:N/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-0687"
    },
    {
      "cve": "CVE-2023-1077",
      "cwe": {
        "id": "CWE-843",
        "name": "Access of Resource Using Incompatible Type (\u0027Type Confusion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In the Linux kernel, pick_next_rt_entity() may return a type confused entry, not detected by the BUG_ON condition, as the confused entry will not be NULL, but list_head.The buggy error condition would lead to a type confused entry with the list head,which would then be used as a type confused sched_rt_entity,causing memory corruption.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-1077"
    },
    {
      "cve": "CVE-2023-1206",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A hash collision flaw was found in the IPv6 connection lookup table in the Linux kernel\u2019s IPv6 functionality when a user makes a new kind of SYN flood attack. A user located in the local network or with a high bandwidth connection can increase the CPU usage of the server that accepts IPV6 connections up to 95%.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:A/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-1206"
    },
    {
      "cve": "CVE-2023-2650",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Processing some specially crafted ASN.1 object identifiers or data containing them may be very slow. Impact summary: Applications that use OBJ_obj2txt() directly, or use any of the OpenSSL subsystems OCSP, PKCS7/SMIME, CMS, CMP/CRMF or TS with no message size limit may experience notable to very long delays when processing those messages, which may lead to a Denial of Service. An OBJECT IDENTIFIER is composed of a series of numbers - sub-identifiers - most of which have no size limit. OBJ_obj2txt() may be used to translate an ASN.1 OBJECT IDENTIFIER given in DER encoding form (using the OpenSSL type ASN1_OBJECT) to its canonical numeric text form, which are the sub-identifiers of the OBJECT IDENTIFIER in decimal form, separated by periods. When one of the sub-identifiers in the OBJECT IDENTIFIER is very large (these are sizes that are seen as absurdly large, taking up tens or hundreds of KiBs), the translation to a decimal number in text may take a very long time. The time complexity is O(square(n)) with \u0027n\u0027 being the size of the sub-identifiers in bytes (*). With OpenSSL 3.0, support to fetch cryptographic algorithms using names / identifiers in string form was introduced. This includes using OBJECT IDENTIFIERs in canonical numeric text form as identifiers for fetching algorithms. Such OBJECT IDENTIFIERs may be received through the ASN.1 structure AlgorithmIdentifier, which is commonly used in multiple protocols to specify what cryptographic algorithm should be used to sign or verify, encrypt or decrypt, or digest passed data. Applications that call OBJ_obj2txt() directly with untrusted data are affected, with any version of OpenSSL. If the use is for the mere purpose of display, the severity is considered low. In OpenSSL 3.0 and newer, this affects the subsystems OCSP, PKCS7/SMIME, CMS, CMP/CRMF or TS. It also impacts anything that processes X.509 certificates, including simple things like verifying its signature. The impact on TLS is relatively low, because all versions of OpenSSL have a 100KiB limit on the peer\u0027s certificate chain. Additionally, this only impacts clients, or servers that have explicitly enabled client authentication. In OpenSSL 1.1.1 and 1.0.2, this only affects displaying diverse objects, such as X.509 certificates. This is assumed to not happen in such a way that it would cause a Denial of Service, so these versions are considered not affected by this issue in such a way that it would be cause for concern, and the severity is therefore considered low.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-2650"
    },
    {
      "cve": "CVE-2023-2953",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in openldap. This security flaw causes a null pointer dereference in ber_memalloc_x() function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-2953"
    },
    {
      "cve": "CVE-2023-3212",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer dereference issue was found in the gfs2 file system in the Linux kernel. It occurs on corrupt gfs2 file systems when the evict code tries to reference the journal descriptor structure after it has been freed and set to NULL. A privileged local user could use this flaw to cause a kernel panic.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.4,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-3212"
    },
    {
      "cve": "CVE-2023-3446",
      "cwe": {
        "id": "CWE-1333",
        "name": "Inefficient Regular Expression Complexity"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. One of those checks confirms that the modulus (\u0027p\u0027 parameter) is not too large. Trying to use a very large modulus is slow and OpenSSL will not normally use a modulus which is over 10,000 bits in length. However the DH_check() function checks numerous aspects of the key or parameters that have been supplied. Some of those checks use the supplied modulus value even if it has already been found to be too large. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulernable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the \u0027-check\u0027 option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-3446"
    },
    {
      "cve": "CVE-2023-3609",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s net/sched: cls_u32 component can be exploited to achieve local privilege escalation.\r\n\r\nIf tcf_change_indev() fails, u32_set_parms() will immediately return an error after incrementing or decrementing the reference counter in tcf_bind_filter(). If an attacker can control the reference counter and set it to zero, they can cause the reference to be freed, leading to a use-after-free vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-3609"
    },
    {
      "cve": "CVE-2023-3611",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds write vulnerability in the Linux kernel\u0027s net/sched: sch_qfq component can be exploited to achieve local privilege escalation.\r\n\r\nThe qfq_change_agg() function in net/sched/sch_qfq.c allows an out-of-bounds write because lmax is updated according to packet sizes without bounds checks.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-3611"
    },
    {
      "cve": "CVE-2023-3772",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Linux kernel\u0027s IP framework for transforming packets (XFRM subsystem). This issue may allow a malicious user with CAP_NET_ADMIN privileges to directly dereference a NULL pointer in xfrm_update_ae_params(), leading to a possible kernel crash and denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-3772"
    },
    {
      "cve": "CVE-2023-3817",
      "cwe": {
        "id": "CWE-834",
        "name": "Excessive Iteration"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. After fixing CVE-2023-3446 it was discovered that a large q parameter value can also trigger an overly long computation during some of these checks. A correct q value, if present, cannot be larger than the modulus p parameter, thus it is unnecessary to perform these checks if q is larger than p. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the \"-check\" option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-3817"
    },
    {
      "cve": "CVE-2023-4016",
      "cwe": {
        "id": "CWE-122",
        "name": "Heap-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Under some circumstances, this weakness allows a user who has access to run the \u201cps\u201d utility on a machine, the ability to write almost unlimited amounts of unfiltered data into the process heap.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 2.5,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-4016"
    },
    {
      "cve": "CVE-2023-4039",
      "cwe": {
        "id": "CWE-693",
        "name": "Protection Mechanism Failure"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A failure in the -fstack-protector feature in GCC-based toolchains \nthat target AArch64 allows an attacker to exploit an existing buffer \noverflow in dynamically-sized local variables in your application \nwithout this being detected. This stack-protector failure only applies \nto C99-style dynamically-sized local variables or those created using \nalloca(). The stack-protector operates as intended for statically-sized \nlocal variables.\n\nThe default behavior when the stack-protector \ndetects an overflow is to terminate your application, resulting in \ncontrolled loss of availability. An attacker who can exploit a buffer \noverflow without triggering the stack-protector might be able to change \nprogram flow control to cause an uncontrolled loss of availability or to\n go further and affect confidentiality or integrity.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.8,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-4039"
    },
    {
      "cve": "CVE-2023-4527",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in glibc. When the getaddrinfo function is called with the AF_UNSPEC address family and the system is configured with no-aaaa mode via /etc/resolv.conf, a DNS response via TCP larger than 2048 bytes can potentially disclose stack contents through the function returned address data, and may cause a crash.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-4527"
    },
    {
      "cve": "CVE-2023-4623",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s net/sched: sch_hfsc (HFSC qdisc traffic control) component can be exploited to achieve local privilege escalation.\n\nIf a class with a link-sharing curve (i.e. with the HFSC_FSC flag set) has a parent without a link-sharing curve, then init_vf() will call vttree_insert() on the parent, but vttree_remove() will be skipped in update_vf(). This leaves a dangling pointer that can cause a use-after-free.\n\nWe recommend upgrading past commit b3d26c5702c7d6c45456326e56d2ccf3f103e60f.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-4623"
    },
    {
      "cve": "CVE-2023-4806",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in glibc. In an extremely rare situation, the getaddrinfo function may access memory that has been freed, resulting in an application crash. This issue is only exploitable when a NSS module implements only the _nss_*_gethostbyname2_r and _nss_*_getcanonname_r hooks without implementing the _nss_*_gethostbyname3_r hook. The resolved name should return a large number of IPv6 and IPv4, and the call to the getaddrinfo function should have the AF_INET6 address family with AI_CANONNAME, AI_ALL and AI_V4MAPPED as flags.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-4806"
    },
    {
      "cve": "CVE-2023-4807",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: The POLY1305 MAC (message authentication code) implementation contains a bug that might corrupt the internal state of applications on the Windows 64 platform when running on newer X86_64 processors supporting the AVX512-IFMA instructions. Impact summary: If in an application that uses the OpenSSL library an attacker can influence whether the POLY1305 MAC algorithm is used, the application state might be corrupted with various application dependent consequences. The POLY1305 MAC (message authentication code) implementation in OpenSSL does not save the contents of non-volatile XMM registers on Windows 64 platform when calculating the MAC of data larger than 64 bytes. Before returning to the caller all the XMM registers are set to zero rather than restoring their previous content. The vulnerable code is used only on newer x86_64 processors supporting the AVX512-IFMA instructions. The consequences of this kind of internal application state corruption can be various - from no consequences, if the calling application does not depend on the contents of non-volatile XMM registers at all, to the worst consequences, where the attacker could get complete control of the application process. However given the contents of the registers are just zeroized so the attacker cannot put arbitrary values inside, the most likely consequence, if any, would be an incorrect result of some application dependent calculations or a crash leading to a denial of service. The POLY1305 MAC algorithm is most frequently used as part of the CHACHA20-POLY1305 AEAD (authenticated encryption with associated data) algorithm. The most common usage of this AEAD cipher is with TLS protocol versions 1.2 and 1.3 and a malicious client can influence whether this AEAD cipher is used by the server. This implies that server applications using OpenSSL can be potentially impacted. However we are currently not aware of any concrete application that would be affected by this issue therefore we consider this a Low severity security issue. As a workaround the AVX512-IFMA instructions support can be disabled at runtime by setting the environment variable OPENSSL_ia32cap: OPENSSL_ia32cap=:~0x200000 The FIPS provider is not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-4807"
    },
    {
      "cve": "CVE-2023-4813",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in glibc. In an uncommon situation, the gaih_inet function may use memory that has been freed, resulting in an application crash. This issue is only exploitable when the getaddrinfo function is called and the hosts database in /etc/nsswitch.conf is configured with SUCCESS=continue or SUCCESS=merge.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-4813"
    },
    {
      "cve": "CVE-2023-4911",
      "cwe": {
        "id": "CWE-121",
        "name": "Stack-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A buffer overflow was discovered in the GNU C Library\u0027s dynamic loader ld.so while processing the GLIBC_TUNABLES environment variable. This issue could allow a local attacker to use maliciously crafted GLIBC_TUNABLES environment variables when launching binaries with SUID permission to execute code with elevated privileges.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-4911"
    },
    {
      "cve": "CVE-2023-4921",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s net/sched: sch_qfq component can be exploited to achieve local privilege escalation.\n\nWhen the plug qdisc is used as a class of the qfq qdisc, sending network packets triggers use-after-free in qfq_dequeue() due to the incorrect .peek handler of sch_plug and lack of error checking in agg_dequeue().\n\nWe recommend upgrading past commit 8fc134fee27f2263988ae38920bc03da416b03d8.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-4921"
    },
    {
      "cve": "CVE-2023-5156",
      "cwe": {
        "id": "CWE-401",
        "name": "Missing Release of Memory after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the GNU C Library. A recent fix for CVE-2023-4806 introduced the potential for a memory leak, which may result in an application crash.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-5156"
    },
    {
      "cve": "CVE-2023-5678",
      "cwe": {
        "id": "CWE-754",
        "name": "Improper Check for Unusual or Exceptional Conditions"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Generating excessively long X9.42 DH keys or checking excessively long X9.42 DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_generate_key() to generate an X9.42 DH key may experience long delays. Likewise, applications that use DH_check_pub_key(), DH_check_pub_key_ex() or EVP_PKEY_public_check() to check an X9.42 DH key or X9.42 DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. While DH_check() performs all the necessary checks (as of CVE-2023-3817), DH_check_pub_key() doesn\u0027t make any of these checks, and is therefore vulnerable for excessively large P and Q parameters. Likewise, while DH_generate_key() performs a check for an excessively large P, it doesn\u0027t check for an excessively large Q. An application that calls DH_generate_key() or DH_check_pub_key() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. DH_generate_key() and DH_check_pub_key() are also called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_pub_key_ex(), EVP_PKEY_public_check(), and EVP_PKEY_generate(). Also vulnerable are the OpenSSL pkey command line application when using the \"-pubcheck\" option, as well as the OpenSSL genpkey command line application. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-5678"
    },
    {
      "cve": "CVE-2023-5717",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A heap out-of-bounds write vulnerability in the Linux kernel\u0027s Linux Kernel Performance Events (perf) component can be exploited to achieve local privilege escalation.\r\n\r\nIf perf_read_group() is called while an event\u0027s sibling_list is smaller than its child\u0027s sibling_list, it can increment or write to memory locations outside of the allocated buffer.\r\n\r\nWe recommend upgrading past commit 32671e3799ca2e4590773fd0e63aaa4229e50c06.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-5717"
    },
    {
      "cve": "CVE-2023-5981",
      "cwe": {
        "id": "CWE-203",
        "name": "Observable Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found that the response times to malformed ciphertexts in RSA-PSK ClientKeyExchange differ from response times of ciphertexts with correct PKCS#1 v1.5 padding.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-5981"
    },
    {
      "cve": "CVE-2023-6121",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An out-of-bounds read vulnerability was found in the NVMe-oF/TCP subsystem in the Linux kernel. This issue may allow a remote attacker to send a crafted TCP packet, triggering a heap-based buffer overflow that results in kmalloc data being printed and potentially leaked to the kernel ring buffer (dmesg).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-6121"
    },
    {
      "cve": "CVE-2023-6817",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s netfilter: nf_tables component can be exploited to achieve local privilege escalation.\n\nThe function nft_pipapo_walk did not skip inactive elements during set walk which could lead double deactivations of PIPAPO (Pile Packet Policies) elements, leading to use-after-free.\n\nWe recommend upgrading past commit 317eb9685095678f2c9f5a8189de698c5354316a.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-6817"
    },
    {
      "cve": "CVE-2023-6931",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A heap out-of-bounds write vulnerability in the Linux kernel\u0027s Performance Events system component can be exploited to achieve local privilege escalation.\n\nA perf_event\u0027s read_size can overflow, leading to an heap out-of-bounds increment or write in perf_read_group().\n\nWe recommend upgrading past commit 382c27f4ed28f803b1f1473ac2d8db0afc795a1b.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-6931"
    },
    {
      "cve": "CVE-2023-6932",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free vulnerability in the Linux kernel\u0027s ipv4: igmp component can be exploited to achieve local privilege escalation.\n\nA race condition can be exploited to cause a timer be mistakenly registered on a RCU read locked object which is freed by another thread.\n\nWe recommend upgrading past commit e2b706c691905fe78468c361aaabc719d0a496f1.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-6932"
    },
    {
      "cve": "CVE-2023-23914",
      "cwe": {
        "id": "CWE-319",
        "name": "Cleartext Transmission of Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A cleartext transmission of sensitive information vulnerability exists in curl \u003cv7.88.0 that could cause HSTS functionality fail when multiple URLs are requested serially. Using its HSTS support, curl can be instructed to use HTTPS instead of usingan insecure clear-text HTTP step even when HTTP is provided in the URL. ThisHSTS mechanism would however surprisingly be ignored by subsequent transferswhen done on the same command line because the state would not be properlycarried on.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.1,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-23914"
    },
    {
      "cve": "CVE-2023-23915",
      "cwe": {
        "id": "CWE-319",
        "name": "Cleartext Transmission of Sensitive Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A cleartext transmission of sensitive information vulnerability exists in curl \u003cv7.88.0 that could cause HSTS functionality to behave incorrectly when multiple URLs are requested in parallel. Using its HSTS support, curl can be instructed to use HTTPS instead of using an insecure clear-text HTTP step even when HTTP is provided in the URL. This HSTS mechanism would however surprisingly fail when multiple transfers are done in parallel as the HSTS cache file gets overwritten by the most recentlycompleted transfer. A later HTTP-only transfer to the earlier host name would then *not* get upgraded properly to HSTS.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-23915"
    },
    {
      "cve": "CVE-2023-23916",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An allocation of resources without limits or throttling vulnerability exists in curl \u003cv7.88.0 based on the \"chained\" HTTP compression algorithms, meaning that a server response can be compressed multiple times and potentially with differentalgorithms. The number of acceptable \"links\" in this \"decompression chain\" wascapped, but the cap was implemented on a per-header basis allowing a maliciousserver to insert a virtually unlimited number of compression steps simply byusing many headers. The use of such a decompression chain could result in a \"malloc bomb\", making curl end up spending enormous amounts of allocated heap memory, or trying to and returning out of memory errors.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-23916"
    },
    {
      "cve": "CVE-2023-24329",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue in the urllib.parse component of Python before 3.11.4 allows attackers to bypass blocklisting methods by supplying a URL that starts with blank characters.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-24329"
    },
    {
      "cve": "CVE-2023-25136",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "OpenSSH server (sshd) 9.1 introduced a double-free vulnerability during options.kex_algorithms handling. This is fixed in OpenSSH 9.2. The double free can be leveraged, by an unauthenticated remote attacker in the default configuration, to jump to any location in the sshd address space. One third-party report states \"remote code execution is theoretically possible.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-25136"
    },
    {
      "cve": "CVE-2023-25139",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "sprintf in the GNU C Library (glibc) 2.37 has a buffer overflow (out-of-bounds write) in some situations with a correct buffer size. This is unrelated to CWE-676. It may write beyond the bounds of the destination buffer when attempting to write a padded, thousands-separated string representation of a number, if the buffer is allocated the exact size required to represent that number as a string. For example, 1,234,567 (with padding to 13) overflows by two bytes.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-25139"
    },
    {
      "cve": "CVE-2023-26604",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "systemd before 247 does not adequately block local privilege escalation for some Sudo configurations, e.g., plausible sudoers files in which the \"systemctl status\" command may be executed. Specifically, systemd does not set LESSSECURE to 1, and thus other programs may be launched from the less program. This presents a substantial security risk when running systemctl from Sudo, because less executes as root when the terminal size is too small to show the complete systemctl output.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-26604"
    },
    {
      "cve": "CVE-2023-27371",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU libmicrohttpd before 0.9.76 allows remote DoS (Denial of Service) due to improper parsing of a multipart/form-data boundary in the postprocessor.c MHD_create_post_processor() method. This allows an attacker to remotely send a malicious HTTP POST packet that includes one or more \u0027\\0\u0027 bytes in a multipart/form-data boundary field, which - assuming a specific heap layout - will result in an out-of-bounds read and a crash in the find_boundary() function.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AC:H/AV:N/A:H/C:N/I:N/PR:N/S:U/UI:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-27371"
    },
    {
      "cve": "CVE-2023-27533",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability in input validation exists in curl \u003c8.0 during communication using the TELNET protocol may allow an attacker to pass on maliciously crafted user name and \"telnet options\" during server negotiation. The lack of proper input scrubbing allows an attacker to send content or perform option negotiation without the application\u0027s intent. This vulnerability could be exploited if an application allows user input, thereby enabling attackers to execute arbitrary code on the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-27533"
    },
    {
      "cve": "CVE-2023-27534",
      "cwe": {
        "id": "CWE-22",
        "name": "Improper Limitation of a Pathname to a Restricted Directory (\u0027Path Traversal\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A path traversal vulnerability exists in curl \u003c8.0.0 SFTP implementation causes the tilde (~) character to be wrongly replaced when used as a prefix in the first path element, in addition to its intended use as the first element to indicate a path relative to the user\u0027s home directory. Attackers can exploit this flaw to bypass filtering or execute arbitrary code by crafting a path like /~2/foo while accessing a server with a specific user.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-27534"
    },
    {
      "cve": "CVE-2023-27535",
      "cwe": {
        "id": "CWE-287",
        "name": "Improper Authentication"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An authentication bypass vulnerability exists in libcurl \u003c8.0.0 in the FTP connection reuse feature that can result in wrong credentials being used during subsequent transfers. Previously created connections are kept in a connection pool for reuse if they match the current setup. However, certain FTP settings such as CURLOPT_FTP_ACCOUNT, CURLOPT_FTP_ALTERNATIVE_TO_USER, CURLOPT_FTP_SSL_CCC, and CURLOPT_USE_SSL were not included in the configuration match checks, causing them to match too easily. This could lead to libcurl using the wrong credentials when performing a transfer, potentially allowing unauthorized access to sensitive information.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-27535"
    },
    {
      "cve": "CVE-2023-27536",
      "cwe": {
        "id": "CWE-287",
        "name": "Improper Authentication"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An authentication bypass vulnerability exists libcurl \u003c8.0.0 in the connection reuse feature which can reuse previously established connections with incorrect user permissions due to a failure to check for changes in the CURLOPT_GSSAPI_DELEGATION option. This vulnerability affects krb5/kerberos/negotiate/GSSAPI transfers and could potentially result in unauthorized access to sensitive information. The safest option is to not reuse connections if the CURLOPT_GSSAPI_DELEGATION option has been changed.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-27536"
    },
    {
      "cve": "CVE-2023-27537",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A double free vulnerability exists in libcurl \u003c8.0.0 when sharing HSTS data between separate \"handles\". This sharing was introduced without considerations for do this sharing across separate threads but there was no indication of this fact in the documentation. Due to missing mutexes or thread locks, two threads sharing the same HSTS data could end up doing a double-free or use-after-free.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-27537"
    },
    {
      "cve": "CVE-2023-27538",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl would reuse a previously created connection even when an SSH related option had been changed that should have prohibited reuse. libcurl keeps previously used connections in a connection pool for subsequent transfers to reuse if one of them matches the setup. However, two SSH settings were left out from the configuration match checks, making them match too easily.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-27538"
    },
    {
      "cve": "CVE-2023-28484",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In libxml2 before 2.10.4, parsing of certain invalid XSD schemas can lead to a NULL pointer dereference and subsequently a segfault. This occurs in xmlSchemaFixupComplexType in xmlschemas.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-28484"
    },
    {
      "cve": "CVE-2023-28531",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ssh-add in OpenSSH before 9.3 adds smartcard keys to ssh-agent without the intended per-hop destination constraints. The earliest affected version is 8.9.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-28531"
    },
    {
      "cve": "CVE-2023-29383",
      "cwe": {
        "id": "CWE-74",
        "name": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In Shadow 4.13, it is possible to inject control characters into fields provided to the SUID program chfn (change finger). Although it is not possible to exploit this directly (e.g., adding a new user fails because \\n is in the block list), it is possible to misrepresent the /etc/passwd file when viewed. Use of \\r manipulations and Unicode characters to work around blocking of the : character make it possible to give the impression that a new user has been added. In other words, an adversary may be able to convince a system administrator to take the system offline (an indirect, social-engineered denial of service) by demonstrating that \"cat /etc/passwd\" shows a rogue user account.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.3,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-29383"
    },
    {
      "cve": "CVE-2023-29469",
      "cwe": {
        "id": "CWE-415",
        "name": "Double Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libxml2 before 2.10.4. When hashing empty dict strings in a crafted XML document, xmlDictComputeFastKey in dict.c can produce non-deterministic values, leading to various logic and memory errors, such as a double free. This behavior occurs because there is an attempt to use the first byte of an empty string, and any value is possible (not solely the \u0027\\0\u0027 value).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-29469"
    },
    {
      "cve": "CVE-2023-29491",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ncurses before 6.4 20230408, when used by a setuid application, allows local users to trigger security-relevant memory corruption via malformed data in a terminfo database file that is found in $HOME/.terminfo or reached via the TERMINFO or TERM environment variable.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-29491"
    },
    {
      "cve": "CVE-2023-29499",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in GLib. GVariant deserialization fails to validate that the input conforms to the expected format, leading to denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-29499"
    },
    {
      "cve": "CVE-2023-31085",
      "cwe": {
        "id": "CWE-369",
        "name": "Divide By Zero"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in drivers/mtd/ubi/cdev.c in the Linux kernel 6.2. There is a divide-by-zero error in do_div(sz,mtd-\u003eerasesize), used indirectly by ctrl_cdev_ioctl, when mtd-\u003eerasesize is 0.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-31085"
    },
    {
      "cve": "CVE-2023-32611",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in GLib. GVariant deserialization is vulnerable to a slowdown issue where a crafted GVariant can cause excessive processing, leading to denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-32611"
    },
    {
      "cve": "CVE-2023-32636",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in glib, where the gvariant deserialization code is vulnerable to a denial of service introduced by additional input validation added to resolve CVE-2023-29499. The offset table validation may be very slow. This bug does not affect any released version of glib but does affect glib distributors who followed the guidance of glib developers to backport the initial fix for CVE-2023-29499.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-32636"
    },
    {
      "cve": "CVE-2023-32643",
      "cwe": {
        "id": "CWE-122",
        "name": "Heap-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in GLib. The GVariant deserialization code is vulnerable to a heap buffer overflow introduced by the fix for CVE-2023-32665. This bug does not affect any released version of GLib, but does affect GLib distributors who followed the guidance of GLib developers to backport the initial fix for CVE-2023-32665.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-32643"
    },
    {
      "cve": "CVE-2023-32665",
      "cwe": {
        "id": "CWE-502",
        "name": "Deserialization of Untrusted Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in GLib. GVariant deserialization is vulnerable to an exponential blowup issue where a crafted GVariant can cause excessive processing, leading to denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-32665"
    },
    {
      "cve": "CVE-2023-34319",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The fix for XSA-423 added logic to Linux\u0027es netback driver to deal with\na frontend splitting a packet in a way such that not all of the headers\nwould come in one piece.  Unfortunately the logic introduced there\ndidn\u0027t account for the extreme case of the entire packet being split\ninto as many pieces as permitted by the protocol, yet still being\nsmaller than the area that\u0027s specially dealt with to keep all (possible)\nheaders together.  Such an unusual packet would therefore trigger a\nbuffer overrun in the driver.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-34319"
    },
    {
      "cve": "CVE-2023-34969",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "D-Bus before 1.15.6 sometimes allows unprivileged users to crash dbus-daemon. If a privileged user with control over the dbus-daemon is using the org.freedesktop.DBus.Monitoring interface to monitor message bus traffic, then an unprivileged user with the ability to connect to the same dbus-daemon can cause a dbus-daemon crash under some circumstances via an unreplyable message. When done on the well-known system bus, this is a denial-of-service vulnerability. The fixed versions are 1.12.28, 1.14.8, and 1.15.6.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-34969"
    },
    {
      "cve": "CVE-2023-35001",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Linux Kernel nftables Out-Of-Bounds Read/Write Vulnerability; nft_byteorder poorly handled vm register contents when CAP_NET_ADMIN is in any user or network namespace",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-35001"
    },
    {
      "cve": "CVE-2023-35945",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Envoy is a cloud-native high-performance edge/middle/service proxy. Envoy\u2019s HTTP/2 codec may leak a header map and bookkeeping structures upon receiving `RST_STREAM` immediately followed by the `GOAWAY` frames from an upstream server. In nghttp2, cleanup of pending requests due to receipt of the `GOAWAY` frame skips de-allocation of the bookkeeping structure and pending compressed header. The error return [code path] is taken if connection is already marked for not sending more requests due to `GOAWAY` frame. The clean-up code is right after the return statement, causing memory leak. Denial of service through memory exhaustion. This vulnerability was patched in versions(s) 1.26.3, 1.25.8, 1.24.9, 1.23.11.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-35945"
    },
    {
      "cve": "CVE-2023-38408",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The PKCS#11 feature in ssh-agent in OpenSSH before 9.3p2 has an insufficiently trustworthy search path, leading to remote code execution if an agent is forwarded to an attacker-controlled system. (Code in /usr/lib is not necessarily safe for loading into ssh-agent.) NOTE: this issue exists because of an incomplete fix for CVE-2016-10009.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.7,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:R/S:C/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-38408"
    },
    {
      "cve": "CVE-2023-38545",
      "cwe": {
        "id": "CWE-122",
        "name": "Heap-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "This flaw makes curl overflow a heap based buffer in the SOCKS5 proxy handshake.\r\n\r\nWhen curl is asked to pass along the hostname to the SOCKS5 proxy to allow that to resolve the address instead of it getting done by curl itself, the maximum length that hostname can be is 255 bytes.\r\n\r\nIf the hostname is detected to be longer than 255 bytes, curl switches to local name resolving and instead passes on the resolved address only to the proxy. Due to a bug, the local variable that means \"let the host resolve the name\" could get the wrong value during a slow SOCKS5 handshake, and contrary to the intention, copy the too long hostname to the target buffer instead of copying just the resolved address there.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-38545"
    },
    {
      "cve": "CVE-2023-38546",
      "cwe": {
        "id": "CWE-73",
        "name": "External Control of File Name or Path"
      },
      "notes": [
        {
          "category": "summary",
          "text": "This flaw allows an attacker to insert cookies at will into a running program\r\nusing libcurl, if the specific series of conditions are met.\r\n\r\nlibcurl performs transfers. In its API, an application creates \"easy handles\"\r\nthat are the individual handles for single transfers.\r\n\r\nlibcurl provides a function call that duplicates en easy handle called\r\n[curl_easy_duphandle](https://curl.se/libcurl/c/curl_easy_duphandle.html).\r\n\r\nIf a transfer has cookies enabled when the handle is duplicated, the\r\ncookie-enable state is also cloned - but without cloning the actual\r\ncookies. If the source handle did not read any cookies from a specific file on\r\ndisk, the cloned version of the handle would instead store the file name as\r\n`none` (using the four ASCII letters, no quotes).\r\n\r\nSubsequent use of the cloned handle that does not explicitly set a source to\r\nload cookies from would then inadvertently load cookies from a file named\r\n`none` - if such a file exists and is readable in the current directory of the\r\nprogram using libcurl. And if using the correct file format of course.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-38546"
    },
    {
      "cve": "CVE-2023-39128",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "GNU gdb (GDB) 13.0.50.20220805-git was discovered to contain a stack overflow via the function ada_decode at /gdb/ada-lang.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-39128"
    },
    {
      "cve": "CVE-2023-39189",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Netfilter subsystem in the Linux kernel. The nfnl_osf_add_callback function did not validate the user mode controlled opt_num field. This flaw allows a local privileged (CAP_NET_ADMIN) attacker to trigger an out-of-bounds read, leading to a crash or information disclosure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-39189"
    },
    {
      "cve": "CVE-2023-39192",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Netfilter subsystem in the Linux kernel. The xt_u32 module did not validate the fields in the xt_u32 structure. This flaw allows a local privileged attacker to trigger an out-of-bounds read by setting the size fields with a value beyond the array boundaries, leading to a crash or information disclosure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:C/C:H/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-39192"
    },
    {
      "cve": "CVE-2023-39193",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the Netfilter subsystem in the Linux kernel. The sctp_mt_check did not validate the flag_count field. This flaw allows a local privileged (CAP_NET_ADMIN) attacker to trigger an out-of-bounds read, leading to a crash or information disclosure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.1,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-39193"
    },
    {
      "cve": "CVE-2023-39194",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the XFRM subsystem in the Linux kernel. The specific flaw exists within the processing of state filters, which can result in a read past the end of an allocated buffer. This flaw allows a local privileged (CAP_NET_ADMIN) attacker to trigger an out-of-bounds read, potentially leading to an information disclosure.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.2,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:C/C:L/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-39194"
    },
    {
      "cve": "CVE-2023-39615",
      "cwe": {
        "id": "CWE-119",
        "name": "Improper Restriction of Operations within the Bounds of a Memory Buffer"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Xmlsoft Libxml2 v2.11.0 was discovered to contain an out-of-bounds read via the xmlSAX2StartElement() function at /libxml2/SAX2.c. This vulnerability allows attackers to cause a Denial of Service (DoS) via supplying a crafted XML file. NOTE: the vendor\u0027s position is that the product does not support the legacy SAX1 interface with custom callbacks; there is a crash even without crafted input.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-39615"
    },
    {
      "cve": "CVE-2023-40283",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in l2cap_sock_release in net/bluetooth/l2cap_sock.c in the Linux kernel before 6.4.10. There is a use-after-free because the children of an sk are mishandled.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-40283"
    },
    {
      "cve": "CVE-2023-42754",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A NULL pointer dereference flaw was found in the Linux kernel ipv4 stack. The socket buffer (skb) was assumed to be associated with a device before calling __ip_options_compile, which is not always the case if the skb is re-routed by ipvs. This issue may allow a local user with CAP_NET_ADMIN privileges to crash the system.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-42754"
    },
    {
      "cve": "CVE-2023-42755",
      "cwe": {
        "id": "CWE-125",
        "name": "Out-of-bounds Read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in the IPv4 Resource Reservation Protocol (RSVP) classifier in the Linux kernel. The xprt pointer may go beyond the linear part of the skb, leading to an out-of-bounds read in the `rsvp_classify` function. This issue may allow a local user to crash the system and cause a denial of service.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-42755"
    },
    {
      "cve": "CVE-2023-44487",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The HTTP/2 protocol allows a denial of service (server resource consumption) because request cancellation can reset many streams quickly, as exploited in the wild in August through October 2023.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-44487"
    },
    {
      "cve": "CVE-2023-45322",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libxml2 through 2.11.5 has a use-after-free that can only occur after a certain memory allocation fails. This occurs in xmlUnlinkNode in tree.c. NOTE: the vendor\u0027s position is \"I don\u0027t think these issues are critical enough to warrant a CVE ID ... because an attacker typically can\u0027t control when memory allocations fail.\"",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-45322"
    },
    {
      "cve": "CVE-2023-45853",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "MiniZip in zlib through 1.3 has an integer overflow and resultant heap-based buffer overflow in zipOpenNewFileInZip4_64 via a long filename, comment, or extra field. NOTE: MiniZip is not a supported part of the zlib product.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-45853"
    },
    {
      "cve": "CVE-2023-45871",
      "cwe": {
        "id": "CWE-120",
        "name": "Buffer Copy without Checking Size of Input (\u0027Classic Buffer Overflow\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in drivers/net/ethernet/intel/igb/igb_main.c in the IGB driver in the Linux kernel before 6.5.3. A buffer size may not be adequate for frames larger than the MTU.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-45871"
    },
    {
      "cve": "CVE-2023-45898",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The Linux kernel before 6.5.4 has an es1 use-after-free in fs/ext4/extents_status.c, related to ext4_es_insert_extent.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-45898"
    },
    {
      "cve": "CVE-2023-45918",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "ncurses 6.4-20230610 has a NULL pointer dereference in tgetstr in tinfo/lib_termcap.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-45918"
    },
    {
      "cve": "CVE-2023-46218",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "This flaw allows a malicious HTTP server to set \"super cookies\" in curl that are then passed back to more origins than what is otherwise allowed or possible. This allows a site to set cookies that then would get sent to different and unrelated sites and domains. It could do this by exploiting a mixed case flaw in curl\u0027s function that verifies a given cookie domain against the Public Suffix List (PSL). For example a cookie could be set with `domain=co.UK` when the URL used a lower case hostname `curl.co.uk`, even though `co.uk` is listed as a PSL domain.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-46218"
    },
    {
      "cve": "CVE-2023-46219",
      "cwe": {
        "id": "CWE-311",
        "name": "Missing Encryption of Sensitive Data"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When saving HSTS data to an excessively long file name, curl could end up removing all contents, making subsequent requests using that file unaware of the HSTS status they should otherwise use.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-46219"
    },
    {
      "cve": "CVE-2023-46862",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in the Linux kernel through 6.5.9. During a race with SQ thread exit, an io_uring/fdinfo.c io_uring_show_fdinfo NULL pointer dereference can occur.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-46862"
    },
    {
      "cve": "CVE-2023-48795",
      "cwe": {
        "id": "CWE-222",
        "name": "Truncation of Security-relevant Information"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The SSH transport protocol with certain OpenSSH extensions, found in OpenSSH before 9.6 and other products, allows remote attackers to bypass integrity checks such that some packets are omitted (from the extension negotiation message), and a client and server may consequently end up with a connection for which some security features have been downgraded or disabled, aka a Terrapin attack. This occurs because the SSH Binary Packet Protocol (BPP), implemented by these extensions, mishandles the handshake phase and mishandles use of sequence numbers. For example, there is an effective attack against SSH\u0027s use of ChaCha20-Poly1305 (and CBC with Encrypt-then-MAC). The bypass occurs in chacha20-poly1305@openssh.com and (if CBC is used) the -etm@openssh.com MAC algorithms. This also affects Maverick Synergy Java SSH API before 3.1.0-SNAPSHOT, Dropbear through 2022.83, Ssh before 5.1.1 in Erlang/OTP, PuTTY before 0.80, AsyncSSH before 2.14.2, golang.org/x/crypto before 0.17.0, libssh before 0.10.6, libssh2 through 1.11.0, Thorn Tech SFTP Gateway before 3.4.6, Tera Term before 5.1, Paramiko before 3.4.0, jsch before 0.2.15, SFTPGo before 2.5.6, Netgate pfSense Plus through 23.09.1, Netgate pfSense CE through 2.7.2, HPN-SSH through 18.2.0, ProFTPD before 1.3.8b (and before1.3.9rc2), ORYX CycloneSSH before 2.3.4, NetSarang XShell 7 before Build 0144, CrushFTP before 10.6.0, ConnectBot SSH library before 2.2.22, Apache MINA sshd through 2.11.0, sshj through 0.37.0, TinySSH through 20230101, trilead-ssh2 6401, the net-ssh gem 7.2.0 for Ruby, the mscdex ssh2 module before 1.15.0 for Node.js, the thrussh library before 0.35.1 for Rust, and the Russh crate before 0.40.2 for Rust; and there could be effects on Bitvise SSH through 9.31.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-48795"
    },
    {
      "cve": "CVE-2023-52425",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libexpat through 2.5.0 allows a denial of service (resource consumption) because many full reparsings are required in the case of a large token for which multiple buffer fills are needed.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-52425"
    },
    {
      "cve": "CVE-2023-52426",
      "cwe": {
        "id": "CWE-776",
        "name": "Improper Restriction of Recursive Entity References in DTDs (\u0027XML Entity Expansion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libexpat through 2.5.0 allows recursive XML Entity Expansion if XML_DTD is undefined at compile time.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2023-52426"
    },
    {
      "cve": "CVE-2024-0584",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A use-after-free issue was found in igmp_start_timer in net/ipv4/igmp.c in the network sub-component in the Linux Kernel. This flaw allows a local user to observe a refcnt use-after-free issue when receiving an igmp query packet, leading to a kernel information leak.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-0584"
    },
    {
      "cve": "CVE-2024-2004",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When a protocol selection parameter option disables all protocols without adding any then the default set of protocols would remain in the allowed set due to an error in the logic for removing protocols. The below command would perform a request to curl.se with a plaintext protocol which has been explicitly disabled.      curl --proto -all,-http http://curl.se  The flaw is only present if the set of selected protocols disables the entire set of available protocols, in itself a command with no practical use and therefore unlikely to be encountered in real situations. The curl security team has thus assessed this to be low severity bug.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-2004"
    },
    {
      "cve": "CVE-2024-2236",
      "cwe": {
        "id": "CWE-208",
        "name": "Observable Timing Discrepancy"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A timing-based side-channel flaw was found in libgcrypt\u0027s RSA implementation. This issue may allow a remote attacker to initiate a Bleichenbacher-style attack, which can lead to the decryption of RSA ciphertexts.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-2236"
    },
    {
      "cve": "CVE-2024-2379",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl skips the certificate verification for a QUIC connection under certain conditions, when built to use wolfSSL. If told to use an unknown/bad cipher or curve, the error path accidentally skips the verification and returns OK, thus ignoring any certificate problems.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-2379"
    },
    {
      "cve": "CVE-2024-2398",
      "cwe": {
        "id": "CWE-772",
        "name": "Missing Release of Resource after Effective Lifetime"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When an application tells libcurl it wants to allow HTTP/2 server push, and the amount of received headers for the push surpasses the maximum allowed limit (1000), libcurl aborts the server push. When aborting, libcurl inadvertently does not free all the previously allocated headers and instead leaks the memory.  Further, this error condition fails silently and is therefore not easily detected by an application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-2398"
    },
    {
      "cve": "CVE-2024-2466",
      "cwe": {
        "id": "CWE-297",
        "name": "Improper Validation of Certificate with Host Mismatch"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl did not check the server certificate of TLS connections done to a host specified as an IP address, when built to use mbedTLS.  libcurl would wrongly avoid using the set hostname function when the specified hostname was given as an IP address, therefore completely skipping the certificate check. This affects all uses of TLS protocols (HTTPS, FTPS, IMAPS, POPS3, SMTPS, etc).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.1,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:H/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-2466"
    },
    {
      "cve": "CVE-2024-2511",
      "cwe": {
        "id": "CWE-400",
        "name": "Uncontrolled Resource Consumption"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Some non-default TLS server configurations can cause unbounded memory growth when processing TLSv1.3 sessions\r\nImpact summary: An attacker may exploit certain server configurations to trigger unbounded memory growth that would lead to a Denial of Service This problem can occur in TLSv1.3 if the non-default SSL_OP_NO_TICKET option is being used (but not if early_data support is also configured and the default anti-replay protection is in use). In this case, under certain conditions, the session cache can get into an incorrect state and it will fail to flush properly as it fills. The session cache will continue to grow in an unbounded manner. A malicious client could deliberately create the scenario for this failure to force a Denial of Service. It may also happen by accident in normal operation. This issue only affects TLS servers supporting TLSv1.3. It does not affect TLS clients. The FIPS modules in 3.2, 3.1 and 3.0 are not affected by this issue. OpenSSL 1.0.2 is also not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-2511"
    },
    {
      "cve": "CVE-2024-2961",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "The iconv() function in the GNU C Library versions 2.39 and older may overflow the output buffer passed to it by up to 4 bytes when converting strings to the ISO-2022-CN-EXT character set, which may be used to crash an application or overwrite a neighbouring variable.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-2961"
    },
    {
      "cve": "CVE-2024-5535",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Issue summary: Calling the OpenSSL API function SSL_select_next_proto with an empty supported client protocols buffer may cause a crash or memory contents to be sent to the peer. Impact summary: A buffer overread can have a range of potential consequences such as unexpected application beahviour or a crash. In particular this issue could result in up to 255 bytes of arbitrary private data from memory being sent to the peer leading to a loss of confidentiality. However, only applications that directly call the SSL_select_next_proto function with a 0 length list of supported client protocols are affected by this issue. This would normally never be a valid scenario and is typically not under attacker control but may occur by accident in the case of a configuration or programming error in the calling application. The OpenSSL API function SSL_select_next_proto is typically used by TLS applications that support ALPN (Application Layer Protocol Negotiation) or NPN (Next Protocol Negotiation). NPN is older, was never standardised and is deprecated in favour of ALPN. We believe that ALPN is significantly more widely deployed than NPN. The SSL_select_next_proto function accepts a list of protocols from the server and a list of protocols from the client and returns the first protocol that appears in the server list that also appears in the client list. In the case of no overlap between the two lists it returns the first item in the client list. In either case it will signal whether an overlap between the two lists was found. In the case where SSL_select_next_proto is called with a zero length client list it fails to notice this condition and returns the memory immediately following the client list pointer (and reports that there was no overlap in the lists). This function is typically called from a server side application callback for ALPN or a client side application callback for NPN. In the case of ALPN the list of protocols supplied by the client is guaranteed by libssl to never be zero in length. The list of server protocols comes from the application and should never normally be expected to be of zero length. In this case if the SSL_select_next_proto function has been called as expected (with the list supplied by the client passed in the client/client_len parameters), then the application will not be vulnerable to this issue. If the application has accidentally been configured with a zero length server list, and has accidentally passed that zero length server list in the client/client_len parameters, and has additionally failed to correctly handle a \"no overlap\" response (which would normally result in a handshake failure in ALPN) then it will be vulnerable to this problem. In the case of NPN, the protocol permits the client to opportunistically select a protocol when there is no overlap. OpenSSL returns the first client protocol in the no overlap case in support of this. The list of client protocols comes from the application and should never normally be expected to be of zero length. However if the SSL_select_next_proto function is accidentally called with a client_len of 0 then an invalid memory pointer will be returned instead. If the application uses this output as the opportunistic protocol then the loss of confidentiality will occur. This issue has been assessed as Low severity because applications are most likely to be vulnerable if they are using NPN instead of ALPN - but NPN is not widely used. It also requires an application configuration or programming error. Finally, this issue would not typically be under attacker control making active exploitation unlikely. The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. Due to the low severity of this issue we are not issuing new releases of OpenSSL at this time. The fix will be included in the next releases when they become available.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.9,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-5535"
    },
    {
      "cve": "CVE-2024-5742",
      "cwe": {
        "id": "CWE-377",
        "name": "Insecure Temporary File"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A vulnerability was found in GNU Nano that allows a possible privilege escalation through an insecure temporary file. If Nano is killed while editing, a file it saves to an emergency file with the permissions of the running user provides a window of opportunity for attackers to escalate privileges through a malicious symlink.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.7,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:H/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-5742"
    },
    {
      "cve": "CVE-2024-6409",
      "cwe": {
        "id": "CWE-364",
        "name": "Signal Handler Race Condition"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A race condition vulnerability was discovered in how signals are handled by OpenSSH\u0027s server (sshd). If a remote attacker does not authenticate within a set time period, then sshd\u0027s SIGALRM handler is called asynchronously. However, this signal handler calls various functions that are not async-signal-safe, for example, syslog(). As a consequence of a successful attack, in the worst case scenario, an attacker may be able to perform a remote code execution (RCE) as an unprivileged user running the sshd server.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:L/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-6409"
    },
    {
      "cve": "CVE-2024-7264",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libcurl\u0027s ASN1 parser code has the `GTime2str()` function, used for parsing an ASN.1 Generalized Time field. If given an syntactically incorrect field, the parser might end up using -1 for the length of the *time fraction*, leading to a `strlen()` getting performed on a pointer to a heap buffer area that is not (purposely) null terminated. This flaw most likely leads to a crash, but can also lead to heap contents getting returned to the application when [CURLINFO_CERTINFO](https://curl.se/libcurl/c/CURLINFO_CERTINFO.html) is used.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-7264"
    },
    {
      "cve": "CVE-2024-8096",
      "cwe": {
        "id": "CWE-295",
        "name": "Improper Certificate Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "When curl is told to use the Certificate Status Request TLS extension, often referred to as OCSP stapling, to verify that the server certificate is valid, it might fail to detect some OCSP problems and instead wrongly consider the response as fine. If the returned status reports another error than \u0027revoked\u0027 (like for example \u0027unauthorized\u0027) it is not treated as a bad certficate.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-8096"
    },
    {
      "cve": "CVE-2024-9143",
      "cwe": {
        "id": "CWE-787",
        "name": "Out-of-bounds Write"
      },
      "notes": [
        {
          "category": "summary",
          "text": "Use of the low-level GF(2m) elliptic curve APIs with untrusted explicit values for the field polynomial can lead to out-of-bounds memory reads or writes. Impact summary: Out of bound memory writes can lead to an application crash or even a possibility of a remote code execution, however, in all the protocols involving Elliptic Curve Cryptography that we\u0027re aware of, either only \"named curves\" are supported, or, if explicit curve parameters are supported, they specify an X9.62 encoding of binary (GF(2m)) curves that can\u0027t represent problematic input values. Thus the likelihood of existence of a vulnerable application is low. In particular, the X9.62 encoding is used for ECC keys in X.509 certificates, so problematic inputs cannot occur in the context of processing X.509 certificates. Any problematic use-cases would have to be using an \"exotic\" curve encoding. The affected APIs include: EC_GROUP_new_curve_GF2m(), EC_GROUP_new_from_params(), and various supporting BN_GF2m_*() functions. Applications working with \"exotic\" explicit binary (GF(2m)) curve parameters, that make it possible to represent invalid field polynomials with a zero constant term, via the above or similar APIs, may terminate abruptly as a result of reading or writing outside of array bounds. Remote code execution cannot easily be ruled out. The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 3.7,
            "baseSeverity": "LOW",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-9143"
    },
    {
      "cve": "CVE-2024-28085",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "notes": [
        {
          "category": "summary",
          "text": "wall in util-linux through 2.40, often installed with setgid tty permissions, allows escape sequences to be sent to other users\u0027 terminals through argv. (Specifically, escape sequences received from stdin are blocked, but escape sequences received from argv are not blocked.) There may be plausible scenarios where this leads to account takeover.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.0"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-28085"
    },
    {
      "cve": "CVE-2024-28182",
      "cwe": {
        "id": "CWE-770",
        "name": "Allocation of Resources Without Limits or Throttling"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nghttp2 is an implementation of the Hypertext Transfer Protocol version 2 in C. The nghttp2 library prior to version 1.61.0 keeps reading the unbounded number of HTTP/2 CONTINUATION frames even after a stream is reset to keep HPACK context in sync.  This causes excessive CPU usage to decode HPACK stream. nghttp2 v1.61.0 mitigates this vulnerability by limiting the number of CONTINUATION frames it accepts per stream. There is no workaround for this vulnerability.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-28182"
    },
    {
      "cve": "CVE-2024-28757",
      "cwe": {
        "id": "CWE-776",
        "name": "Improper Restriction of Recursive Entity References in DTDs (\u0027XML Entity Expansion\u0027)"
      },
      "notes": [
        {
          "category": "summary",
          "text": "libexpat through 2.6.1 allows an XML Entity Expansion attack when there is isolated use of external parsers (created via XML_ExternalEntityParserCreate).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-28757"
    },
    {
      "cve": "CVE-2024-28834",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw was found in GnuTLS. The Minerva attack is a cryptographic vulnerability that exploits deterministic behavior in systems like GnuTLS, leading to side-channel leaks. In specific scenarios, such as when using the GNUTLS_PRIVKEY_FLAG_REPRODUCIBLE flag, it can result in a noticeable step in nonce size from 513 to 512 bits, exposing a potential timing side-channel.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:N/A:N/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-28834"
    },
    {
      "cve": "CVE-2024-28835",
      "cwe": {
        "id": "CWE-248",
        "name": "Uncaught Exception"
      },
      "notes": [
        {
          "category": "summary",
          "text": "A flaw has been discovered in GnuTLS where an application crash can be induced when attempting to verify a specially crafted .pem bundle using the \"certtool --verify-chain\" command.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.0,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-28835"
    },
    {
      "cve": "CVE-2024-33599",
      "cwe": {
        "id": "CWE-121",
        "name": "Stack-based Buffer Overflow"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nscd: Stack-based buffer overflow in netgroup cache\r\n\r\nIf the Name Service Cache Daemon\u0027s (nscd) fixed size cache is exhausted\r\nby client requests then a subsequent client request for netgroup data\r\nmay result in a stack-based buffer overflow.  This flaw was introduced\r\nin glibc 2.15 when the cache was added to nscd.\r\n\r\nThis vulnerability is only present in the nscd binary.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.6,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-33599"
    },
    {
      "cve": "CVE-2024-33600",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nscd: Null pointer crashes after notfound response\r\n\r\nIf the Name Service Cache Daemon\u0027s (nscd) cache fails to add a not-found\r\nnetgroup response to the cache, the client request can result in a null\r\npointer dereference.  This flaw was introduced in glibc 2.15 when the\r\ncache was added to nscd.\r\n\r\nThis vulnerability is only present in the nscd binary.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.3,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-33600"
    },
    {
      "cve": "CVE-2024-33601",
      "cwe": {
        "id": "CWE-617",
        "name": "Reachable Assertion"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nscd: netgroup cache may terminate daemon on memory allocation failure\r\n\r\nThe Name Service Cache Daemon\u0027s (nscd) netgroup cache uses xmalloc or\r\nxrealloc and these functions may terminate the process due to a memory\r\nallocation failure resulting in a denial of service to the clients.  The\r\nflaw was introduced in glibc 2.15 when the cache was added to nscd.\r\n\r\nThis vulnerability is only present in the nscd binary.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.0,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-33601"
    },
    {
      "cve": "CVE-2024-33602",
      "cwe": {
        "id": "CWE-466",
        "name": "Return of Pointer Value Outside of Expected Range"
      },
      "notes": [
        {
          "category": "summary",
          "text": "nscd: netgroup cache assumes NSS callback uses in-buffer strings\r\n\r\nThe Name Service Cache Daemon\u0027s (nscd) netgroup cache can corrupt memory\r\nwhen the NSS callback does not store all strings in the provided buffer.\r\nThe flaw was introduced in glibc 2.15 when the cache was added to nscd.\r\n\r\nThis vulnerability is only present in the nscd binary.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 4.0,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-33602"
    },
    {
      "cve": "CVE-2024-34459",
      "cwe": {
        "id": "CWE-126",
        "name": "Buffer Over-read"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in xmllint (from libxml2) before 2.11.8 and 2.12.x before 2.12.7. Formatting error messages with xmllint --htmlout can result in a buffer over-read in xmlHTMLPrintFileContext in xmllint.c.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-34459"
    },
    {
      "cve": "CVE-2024-37370",
      "cwe": {
        "id": "CWE-130",
        "name": "Improper Handling of Length Parameter Inconsistency"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In MIT Kerberos 5 (aka krb5) before 1.21.3, an attacker can modify the plaintext Extra Count field of a confidential GSS krb5 wrap token, causing the unwrapped token to appear truncated to the application.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-37370"
    },
    {
      "cve": "CVE-2024-37371",
      "cwe": {
        "id": "CWE-130",
        "name": "Improper Handling of Length Parameter Inconsistency"
      },
      "notes": [
        {
          "category": "summary",
          "text": "In MIT Kerberos 5 (aka krb5) before 1.21.3, an attacker can cause invalid memory reads during GSS message token handling by sending message tokens with invalid length fields.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-37371"
    },
    {
      "cve": "CVE-2024-45490",
      "cwe": {
        "id": "CWE-131",
        "name": "Incorrect Calculation of Buffer Size"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libexpat before 2.6.3. xmlparse.c does not reject a negative length for XML_ParseBuffer.",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-45490"
    },
    {
      "cve": "CVE-2024-45491",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libexpat before 2.6.3. dtdCopy in xmlparse.c can have an integer overflow for nDefaultAtts on 32-bit platforms (where UINT_MAX equals SIZE_MAX).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.3,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-45491"
    },
    {
      "cve": "CVE-2024-45492",
      "cwe": {
        "id": "CWE-190",
        "name": "Integer Overflow or Wraparound"
      },
      "notes": [
        {
          "category": "summary",
          "text": "An issue was discovered in libexpat before 2.6.3. nextScaffoldPart in xmlparse.c can have an integer overflow for m_groupSize on 32-bit platforms (where UINT_MAX equals SIZE_MAX).",
          "title": "Summary"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-0001",
          "CSAFPID-0002",
          "CSAFPID-0003",
          "CSAFPID-0004",
          "CSAFPID-0005"
        ]
      },
      "remediations": [
        {
          "category": "mitigation",
          "details": "Only build and run applications from trusted sources.",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        },
        {
          "category": "none_available",
          "details": "Currently no fix is available",
          "product_ids": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 7.3,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-0001",
            "CSAFPID-0002",
            "CSAFPID-0003",
            "CSAFPID-0004",
            "CSAFPID-0005"
          ]
        }
      ],
      "title": "CVE-2024-45492"
    }
  ]
}

{
  "affected": [],
  "aliases": [
    "CVE-2020-13434"
  ],
  "database_specific": {
    "cwe_ids": [
      "CWE-190"
    ],
    "github_reviewed": false,
    "github_reviewed_at": null,
    "nvd_published_at": "2020-05-24T22:15:00Z",
    "severity": "MODERATE"
  },
  "details": "SQLite through 3.32.0 has an integer overflow in sqlite3_str_vappendf in printf.c.",
  "id": "GHSA-fjp7-rxx4-gq9h",
  "modified": "2024-04-04T02:51:02Z",
  "published": "2022-05-24T17:18:38Z",
  "references": [
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2020-13434"
    },
    {
      "type": "WEB",
      "url": "https://www.sqlite.org/src/info/d08d3405878d394e"
    },
    {
      "type": "WEB",
      "url": "https://www.sqlite.org/src/info/23439ea582241138"
    },
    {
      "type": "WEB",
      "url": "https://www.oracle.com/security-alerts/cpujul2020.html"
    },
    {
      "type": "WEB",
      "url": "https://www.oracle.com/security-alerts/cpuapr2022.html"
    },
    {
      "type": "WEB",
      "url": "https://www.oracle.com/security-alerts/cpuApr2021.html"
    },
    {
      "type": "WEB",
      "url": "https://usn.ubuntu.com/4394-1"
    },
    {
      "type": "WEB",
      "url": "https://support.apple.com/kb/HT211952"
    },
    {
      "type": "WEB",
      "url": "https://support.apple.com/kb/HT211935"
    },
    {
      "type": "WEB",
      "url": "https://support.apple.com/kb/HT211931"
    },
    {
      "type": "WEB",
      "url": "https://support.apple.com/kb/HT211850"
    },
    {
      "type": "WEB",
      "url": "https://support.apple.com/kb/HT211844"
    },
    {
      "type": "WEB",
      "url": "https://support.apple.com/kb/HT211843"
    },
    {
      "type": "WEB",
      "url": "https://security.netapp.com/advisory/ntap-20200528-0004"
    },
    {
      "type": "WEB",
      "url": "https://security.gentoo.org/glsa/202007-26"
    },
    {
      "type": "WEB",
      "url": "https://security.FreeBSD.org/advisories/FreeBSD-SA-20:22.sqlite.asc"
    },
    {
      "type": "WEB",
      "url": "https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/L7KXQWHIY2MQP4LNM6ODWJENMXYYQYBN"
    },
    {
      "type": "WEB",
      "url": "https://lists.fedoraproject.org/archives/list/package-announce%40lists.fedoraproject.org/message/L7KXQWHIY2MQP4LNM6ODWJENMXYYQYBN"
    },
    {
      "type": "WEB",
      "url": "https://lists.debian.org/debian-lts-announce/2020/08/msg00037.html"
    },
    {
      "type": "WEB",
      "url": "https://lists.debian.org/debian-lts-announce/2020/05/msg00024.html"
    },
    {
      "type": "WEB",
      "url": "http://seclists.org/fulldisclosure/2020/Dec/32"
    },
    {
      "type": "WEB",
      "url": "http://seclists.org/fulldisclosure/2020/Nov/19"
    },
    {
      "type": "WEB",
      "url": "http://seclists.org/fulldisclosure/2020/Nov/20"
    },
    {
      "type": "WEB",
      "url": "http://seclists.org/fulldisclosure/2020/Nov/22"
    }
  ],
  "schema_version": "1.4.0",
  "severity": [
    {
      "score": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
      "type": "CVSS_V3"
    }
  ]
}

{
  "document": {
    "aggregate_severity": {
      "namespace": "https://access.redhat.com/security/updates/classification/",
      "text": "Moderate"
    },
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Copyright \u00a9 Red Hat, Inc. All rights reserved.",
      "tlp": {
        "label": "WHITE",
        "url": "https://www.first.org/tlp/"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "An update for mingw-binutils, mingw-bzip2, mingw-filesystem, and mingw-sqlite is now available for Red Hat Enterprise Linux 8.\n\nRed Hat Product Security has rated this update as having a security impact of Moderate. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.",
        "title": "Topic"
      },
      {
        "category": "general",
        "text": "MinGW is a free and open source software development environment to create Microsoft Windows applications.\n\nThe following packages have been upgraded to a later upstream version: mingw-sqlite (3.26.0.0). (BZ#1845475)\n\nSecurity Fix(es):\n\n* sqlite: Division by zero in whereLoopAddBtreeIndex in sqlite3.c (CVE-2019-16168)\n\n* sqlite: Integer overflow in sqlite3_str_vappendf function in printf.c (CVE-2020-13434)\n\n* sqlite: Use-after-free in fts3EvalNextRow in ext/fts3/fts3.c (CVE-2020-13630)\n\n* sqlite: Virtual table can be renamed into the name of one of its shadow tables (CVE-2020-13631)\n\n* sqlite: NULL pointer dereference in ext/fts3/fts3_snippet.c via a crafted matchinfo() query (CVE-2020-13632)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.\n\nAdditional Changes:\n\nFor detailed information on changes in this release, see the Red Hat Enterprise Linux 8.4 Release Notes linked from the References section.",
        "title": "Details"
      },
      {
        "category": "legal_disclaimer",
        "text": "This content is licensed under the Creative Commons Attribution 4.0 International License (https://creativecommons.org/licenses/by/4.0/). If you distribute this content, or a modified version of it, you must provide attribution to Red Hat Inc. and provide a link to the original.",
        "title": "Terms of Use"
      }
    ],
    "publisher": {
      "category": "vendor",
      "contact_details": "https://access.redhat.com/security/team/contact/",
      "issuing_authority": "Red Hat Product Security is responsible for vulnerability handling across all Red Hat products and services.",
      "name": "Red Hat Product Security",
      "namespace": "https://www.redhat.com"
    },
    "references": [
      {
        "category": "self",
        "summary": "https://access.redhat.com/errata/RHSA-2021:1968",
        "url": "https://access.redhat.com/errata/RHSA-2021:1968"
      },
      {
        "category": "external",
        "summary": "https://access.redhat.com/security/updates/classification/#moderate",
        "url": "https://access.redhat.com/security/updates/classification/#moderate"
      },
      {
        "category": "external",
        "summary": "https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/8/html/8.4_release_notes/",
        "url": "https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/8/html/8.4_release_notes/"
      },
      {
        "category": "external",
        "summary": "1768986",
        "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1768986"
      },
      {
        "category": "external",
        "summary": "1841223",
        "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1841223"
      },
      {
        "category": "external",
        "summary": "1841562",
        "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1841562"
      },
      {
        "category": "external",
        "summary": "1841568",
        "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1841568"
      },
      {
        "category": "external",
        "summary": "1841574",
        "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1841574"
      },
      {
        "category": "external",
        "summary": "1918306",
        "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1918306"
      },
      {
        "category": "self",
        "summary": "Canonical URL",
        "url": "https://security.access.redhat.com/data/csaf/v2/advisories/2021/rhsa-2021_1968.json"
      }
    ],
    "title": "Red Hat Security Advisory: mingw packages security and bug fix update",
    "tracking": {
      "current_release_date": "2024-11-15T08:43:16+00:00",
      "generator": {
        "date": "2024-11-15T08:43:16+00:00",
        "engine": {
          "name": "Red Hat SDEngine",
          "version": "4.2.1"
        }
      },
      "id": "RHSA-2021:1968",
      "initial_release_date": "2021-05-18T15:23:23+00:00",
      "revision_history": [
        {
          "date": "2021-05-18T15:23:23+00:00",
          "number": "1",
          "summary": "Initial version"
        },
        {
          "date": "2021-05-18T15:23:23+00:00",
          "number": "2",
          "summary": "Last updated version"
        },
        {
          "date": "2024-11-15T08:43:16+00:00",
          "number": "3",
          "summary": "Last generated version"
        }
      ],
      "status": "final",
      "version": "3"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_name",
                "name": "Red Hat CodeReady Linux Builder (v. 8)",
                "product": {
                  "name": "Red Hat CodeReady Linux Builder (v. 8)",
                  "product_id": "CRB-8.4.0.GA",
                  "product_identification_helper": {
                    "cpe": "cpe:/a:redhat:enterprise_linux:8::crb"
                  }
                }
              }
            ],
            "category": "product_family",
            "name": "Red Hat Enterprise Linux"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "mingw-binutils-0:2.30-3.el8.src",
                "product": {
                  "name": "mingw-binutils-0:2.30-3.el8.src",
                  "product_id": "mingw-binutils-0:2.30-3.el8.src",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/mingw-binutils@2.30-3.el8?arch=src"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "mingw-sqlite-0:3.26.0.0-1.el8.src",
                "product": {
                  "name": "mingw-sqlite-0:3.26.0.0-1.el8.src",
                  "product_id": "mingw-sqlite-0:3.26.0.0-1.el8.src",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/mingw-sqlite@3.26.0.0-1.el8?arch=src"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "mingw-bzip2-0:1.0.6-14.el8.src",
                "product": {
                  "name": "mingw-bzip2-0:1.0.6-14.el8.src",
                  "product_id": "mingw-bzip2-0:1.0.6-14.el8.src",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/mingw-bzip2@1.0.6-14.el8?arch=src"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "mingw-filesystem-0:104-2.el8.src",
                "product": {
                  "name": "mingw-filesystem-0:104-2.el8.src",
                  "product_id": "mingw-filesystem-0:104-2.el8.src",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/mingw-filesystem@104-2.el8?arch=src"
                  }
                }
              }
            ],
            "category": "architecture",
            "name": "src"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "mingw-binutils-generic-0:2.30-3.el8.aarch64",
                "product": {
                  "name": "mingw-binutils-generic-0:2.30-3.el8.aarch64",
                  "product_id": "mingw-binutils-generic-0:2.30-3.el8.aarch64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/mingw-binutils-generic@2.30-3.el8?arch=aarch64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "mingw32-binutils-0:2.30-3.el8.aarch64",
                "product": {
                  "name": "mingw32-binutils-0:2.30-3.el8.aarch64",
                  "product_id": "mingw32-binutils-0:2.30-3.el8.aarch64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/mingw32-binutils@2.30-3.el8?arch=aarch64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "mingw64-binutils-0:2.30-3.el8.aarch64",
                "product": {
                  "name": "mingw64-binutils-0:2.30-3.el8.aarch64",
                  "product_id": "mingw64-binutils-0:2.30-3.el8.aarch64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/mingw64-binutils@2.30-3.el8?arch=aarch64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "mingw-binutils-debugsource-0:2.30-3.el8.aarch64",
                "product": {
                  "name": "mingw-binutils-debugsource-0:2.30-3.el8.aarch64",
                  "product_id": "mingw-binutils-debugsource-0:2.30-3.el8.aarch64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/mingw-binutils-debugsource@2.30-3.el8?arch=aarch64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "mingw-binutils-debuginfo-0:2.30-3.el8.aarch64",
                "product": {
                  "name": "mingw-binutils-debuginfo-0:2.30-3.el8.aarch64",
                  "product_id": "mingw-binutils-debuginfo-0:2.30-3.el8.aarch64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/mingw-binutils-debuginfo@2.30-3.el8?arch=aarch64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "mingw-binutils-generic-debuginfo-0:2.30-3.el8.aarch64",
                "product": {
                  "name": "mingw-binutils-generic-debuginfo-0:2.30-3.el8.aarch64",
                  "product_id": "mingw-binutils-generic-debuginfo-0:2.30-3.el8.aarch64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/mingw-binutils-generic-debuginfo@2.30-3.el8?arch=aarch64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "mingw32-binutils-debuginfo-0:2.30-3.el8.aarch64",
                "product": {
                  "name": "mingw32-binutils-debuginfo-0:2.30-3.el8.aarch64",
                  "product_id": "mingw32-binutils-debuginfo-0:2.30-3.el8.aarch64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/mingw32-binutils-debuginfo@2.30-3.el8?arch=aarch64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "mingw64-binutils-debuginfo-0:2.30-3.el8.aarch64",
                "product": {
                  "name": "mingw64-binutils-debuginfo-0:2.30-3.el8.aarch64",
                  "product_id": "mingw64-binutils-debuginfo-0:2.30-3.el8.aarch64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/mingw64-binutils-debuginfo@2.30-3.el8?arch=aarch64"
                  }
                }
              }
            ],
            "category": "architecture",
            "name": "aarch64"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "mingw-binutils-generic-0:2.30-3.el8.ppc64le",
                "product": {
                  "name": "mingw-binutils-generic-0:2.30-3.el8.ppc64le",
                  "product_id": "mingw-binutils-generic-0:2.30-3.el8.ppc64le",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/mingw-binutils-generic@2.30-3.el8?arch=ppc64le"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "mingw32-binutils-0:2.30-3.el8.ppc64le",
                "product": {
                  "name": "mingw32-binutils-0:2.30-3.el8.ppc64le",
                  "product_id": "mingw32-binutils-0:2.30-3.el8.ppc64le",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/mingw32-binutils@2.30-3.el8?arch=ppc64le"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "mingw64-binutils-0:2.30-3.el8.ppc64le",
                "product": {
                  "name": "mingw64-binutils-0:2.30-3.el8.ppc64le",
                  "product_id": "mingw64-binutils-0:2.30-3.el8.ppc64le",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/mingw64-binutils@2.30-3.el8?arch=ppc64le"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "mingw-binutils-debugsource-0:2.30-3.el8.ppc64le",
                "product": {
                  "name": "mingw-binutils-debugsource-0:2.30-3.el8.ppc64le",
                  "product_id": "mingw-binutils-debugsource-0:2.30-3.el8.ppc64le",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/mingw-binutils-debugsource@2.30-3.el8?arch=ppc64le"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "mingw-binutils-debuginfo-0:2.30-3.el8.ppc64le",
                "product": {
                  "name": "mingw-binutils-debuginfo-0:2.30-3.el8.ppc64le",
                  "product_id": "mingw-binutils-debuginfo-0:2.30-3.el8.ppc64le",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/mingw-binutils-debuginfo@2.30-3.el8?arch=ppc64le"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "mingw-binutils-generic-debuginfo-0:2.30-3.el8.ppc64le",
                "product": {
                  "name": "mingw-binutils-generic-debuginfo-0:2.30-3.el8.ppc64le",
                  "product_id": "mingw-binutils-generic-debuginfo-0:2.30-3.el8.ppc64le",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/mingw-binutils-generic-debuginfo@2.30-3.el8?arch=ppc64le"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "mingw32-binutils-debuginfo-0:2.30-3.el8.ppc64le",
                "product": {
                  "name": "mingw32-binutils-debuginfo-0:2.30-3.el8.ppc64le",
                  "product_id": "mingw32-binutils-debuginfo-0:2.30-3.el8.ppc64le",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/mingw32-binutils-debuginfo@2.30-3.el8?arch=ppc64le"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "mingw64-binutils-debuginfo-0:2.30-3.el8.ppc64le",
                "product": {
                  "name": "mingw64-binutils-debuginfo-0:2.30-3.el8.ppc64le",
                  "product_id": "mingw64-binutils-debuginfo-0:2.30-3.el8.ppc64le",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/mingw64-binutils-debuginfo@2.30-3.el8?arch=ppc64le"
                  }
                }
              }
            ],
            "category": "architecture",
            "name": "ppc64le"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "mingw-binutils-generic-0:2.30-3.el8.x86_64",
                "product": {
                  "name": "mingw-binutils-generic-0:2.30-3.el8.x86_64",
                  "product_id": "mingw-binutils-generic-0:2.30-3.el8.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/mingw-binutils-generic@2.30-3.el8?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "mingw32-binutils-0:2.30-3.el8.x86_64",
                "product": {
                  "name": "mingw32-binutils-0:2.30-3.el8.x86_64",
                  "product_id": "mingw32-binutils-0:2.30-3.el8.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/mingw32-binutils@2.30-3.el8?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "mingw64-binutils-0:2.30-3.el8.x86_64",
                "product": {
                  "name": "mingw64-binutils-0:2.30-3.el8.x86_64",
                  "product_id": "mingw64-binutils-0:2.30-3.el8.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/mingw64-binutils@2.30-3.el8?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "mingw-binutils-debugsource-0:2.30-3.el8.x86_64",
                "product": {
                  "name": "mingw-binutils-debugsource-0:2.30-3.el8.x86_64",
                  "product_id": "mingw-binutils-debugsource-0:2.30-3.el8.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/mingw-binutils-debugsource@2.30-3.el8?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "mingw-binutils-debuginfo-0:2.30-3.el8.x86_64",
                "product": {
                  "name": "mingw-binutils-debuginfo-0:2.30-3.el8.x86_64",
                  "product_id": "mingw-binutils-debuginfo-0:2.30-3.el8.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/mingw-binutils-debuginfo@2.30-3.el8?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "mingw-binutils-generic-debuginfo-0:2.30-3.el8.x86_64",
                "product": {
                  "name": "mingw-binutils-generic-debuginfo-0:2.30-3.el8.x86_64",
                  "product_id": "mingw-binutils-generic-debuginfo-0:2.30-3.el8.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/mingw-binutils-generic-debuginfo@2.30-3.el8?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "mingw32-binutils-debuginfo-0:2.30-3.el8.x86_64",
                "product": {
                  "name": "mingw32-binutils-debuginfo-0:2.30-3.el8.x86_64",
                  "product_id": "mingw32-binutils-debuginfo-0:2.30-3.el8.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/mingw32-binutils-debuginfo@2.30-3.el8?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "mingw64-binutils-debuginfo-0:2.30-3.el8.x86_64",
                "product": {
                  "name": "mingw64-binutils-debuginfo-0:2.30-3.el8.x86_64",
                  "product_id": "mingw64-binutils-debuginfo-0:2.30-3.el8.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/mingw64-binutils-debuginfo@2.30-3.el8?arch=x86_64"
                  }
                }
              }
            ],
            "category": "architecture",
            "name": "x86_64"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "mingw-binutils-generic-0:2.30-3.el8.s390x",
                "product": {
                  "name": "mingw-binutils-generic-0:2.30-3.el8.s390x",
                  "product_id": "mingw-binutils-generic-0:2.30-3.el8.s390x",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/mingw-binutils-generic@2.30-3.el8?arch=s390x"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "mingw32-binutils-0:2.30-3.el8.s390x",
                "product": {
                  "name": "mingw32-binutils-0:2.30-3.el8.s390x",
                  "product_id": "mingw32-binutils-0:2.30-3.el8.s390x",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/mingw32-binutils@2.30-3.el8?arch=s390x"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "mingw64-binutils-0:2.30-3.el8.s390x",
                "product": {
                  "name": "mingw64-binutils-0:2.30-3.el8.s390x",
                  "product_id": "mingw64-binutils-0:2.30-3.el8.s390x",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/mingw64-binutils@2.30-3.el8?arch=s390x"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "mingw-binutils-debugsource-0:2.30-3.el8.s390x",
                "product": {
                  "name": "mingw-binutils-debugsource-0:2.30-3.el8.s390x",
                  "product_id": "mingw-binutils-debugsource-0:2.30-3.el8.s390x",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/mingw-binutils-debugsource@2.30-3.el8?arch=s390x"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "mingw-binutils-debuginfo-0:2.30-3.el8.s390x",
                "product": {
                  "name": "mingw-binutils-debuginfo-0:2.30-3.el8.s390x",
                  "product_id": "mingw-binutils-debuginfo-0:2.30-3.el8.s390x",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/mingw-binutils-debuginfo@2.30-3.el8?arch=s390x"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "mingw-binutils-generic-debuginfo-0:2.30-3.el8.s390x",
                "product": {
                  "name": "mingw-binutils-generic-debuginfo-0:2.30-3.el8.s390x",
                  "product_id": "mingw-binutils-generic-debuginfo-0:2.30-3.el8.s390x",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/mingw-binutils-generic-debuginfo@2.30-3.el8?arch=s390x"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "mingw32-binutils-debuginfo-0:2.30-3.el8.s390x",
                "product": {
                  "name": "mingw32-binutils-debuginfo-0:2.30-3.el8.s390x",
                  "product_id": "mingw32-binutils-debuginfo-0:2.30-3.el8.s390x",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/mingw32-binutils-debuginfo@2.30-3.el8?arch=s390x"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "mingw64-binutils-debuginfo-0:2.30-3.el8.s390x",
                "product": {
                  "name": "mingw64-binutils-debuginfo-0:2.30-3.el8.s390x",
                  "product_id": "mingw64-binutils-debuginfo-0:2.30-3.el8.s390x",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/mingw64-binutils-debuginfo@2.30-3.el8?arch=s390x"
                  }
                }
              }
            ],
            "category": "architecture",
            "name": "s390x"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "mingw32-sqlite-0:3.26.0.0-1.el8.noarch",
                "product": {
                  "name": "mingw32-sqlite-0:3.26.0.0-1.el8.noarch",
                  "product_id": "mingw32-sqlite-0:3.26.0.0-1.el8.noarch",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/mingw32-sqlite@3.26.0.0-1.el8?arch=noarch"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "mingw32-sqlite-static-0:3.26.0.0-1.el8.noarch",
                "product": {
                  "name": "mingw32-sqlite-static-0:3.26.0.0-1.el8.noarch",
                  "product_id": "mingw32-sqlite-static-0:3.26.0.0-1.el8.noarch",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/mingw32-sqlite-static@3.26.0.0-1.el8?arch=noarch"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "mingw64-sqlite-0:3.26.0.0-1.el8.noarch",
                "product": {
                  "name": "mingw64-sqlite-0:3.26.0.0-1.el8.noarch",
                  "product_id": "mingw64-sqlite-0:3.26.0.0-1.el8.noarch",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/mingw64-sqlite@3.26.0.0-1.el8?arch=noarch"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "mingw64-sqlite-static-0:3.26.0.0-1.el8.noarch",
                "product": {
                  "name": "mingw64-sqlite-static-0:3.26.0.0-1.el8.noarch",
                  "product_id": "mingw64-sqlite-static-0:3.26.0.0-1.el8.noarch",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/mingw64-sqlite-static@3.26.0.0-1.el8?arch=noarch"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "mingw32-sqlite-debuginfo-0:3.26.0.0-1.el8.noarch",
                "product": {
                  "name": "mingw32-sqlite-debuginfo-0:3.26.0.0-1.el8.noarch",
                  "product_id": "mingw32-sqlite-debuginfo-0:3.26.0.0-1.el8.noarch",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/mingw32-sqlite-debuginfo@3.26.0.0-1.el8?arch=noarch"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "mingw64-sqlite-debuginfo-0:3.26.0.0-1.el8.noarch",
                "product": {
                  "name": "mingw64-sqlite-debuginfo-0:3.26.0.0-1.el8.noarch",
                  "product_id": "mingw64-sqlite-debuginfo-0:3.26.0.0-1.el8.noarch",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/mingw64-sqlite-debuginfo@3.26.0.0-1.el8?arch=noarch"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "mingw32-bzip2-0:1.0.6-14.el8.noarch",
                "product": {
                  "name": "mingw32-bzip2-0:1.0.6-14.el8.noarch",
                  "product_id": "mingw32-bzip2-0:1.0.6-14.el8.noarch",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/mingw32-bzip2@1.0.6-14.el8?arch=noarch"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "mingw32-bzip2-static-0:1.0.6-14.el8.noarch",
                "product": {
                  "name": "mingw32-bzip2-static-0:1.0.6-14.el8.noarch",
                  "product_id": "mingw32-bzip2-static-0:1.0.6-14.el8.noarch",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/mingw32-bzip2-static@1.0.6-14.el8?arch=noarch"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "mingw64-bzip2-0:1.0.6-14.el8.noarch",
                "product": {
                  "name": "mingw64-bzip2-0:1.0.6-14.el8.noarch",
                  "product_id": "mingw64-bzip2-0:1.0.6-14.el8.noarch",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/mingw64-bzip2@1.0.6-14.el8?arch=noarch"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "mingw64-bzip2-static-0:1.0.6-14.el8.noarch",
                "product": {
                  "name": "mingw64-bzip2-static-0:1.0.6-14.el8.noarch",
                  "product_id": "mingw64-bzip2-static-0:1.0.6-14.el8.noarch",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/mingw64-bzip2-static@1.0.6-14.el8?arch=noarch"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "mingw32-bzip2-debuginfo-0:1.0.6-14.el8.noarch",
                "product": {
                  "name": "mingw32-bzip2-debuginfo-0:1.0.6-14.el8.noarch",
                  "product_id": "mingw32-bzip2-debuginfo-0:1.0.6-14.el8.noarch",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/mingw32-bzip2-debuginfo@1.0.6-14.el8?arch=noarch"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "mingw64-bzip2-debuginfo-0:1.0.6-14.el8.noarch",
                "product": {
                  "name": "mingw64-bzip2-debuginfo-0:1.0.6-14.el8.noarch",
                  "product_id": "mingw64-bzip2-debuginfo-0:1.0.6-14.el8.noarch",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/mingw64-bzip2-debuginfo@1.0.6-14.el8?arch=noarch"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "mingw-filesystem-base-0:104-2.el8.noarch",
                "product": {
                  "name": "mingw-filesystem-base-0:104-2.el8.noarch",
                  "product_id": "mingw-filesystem-base-0:104-2.el8.noarch",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/mingw-filesystem-base@104-2.el8?arch=noarch"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "mingw32-filesystem-0:104-2.el8.noarch",
                "product": {
                  "name": "mingw32-filesystem-0:104-2.el8.noarch",
                  "product_id": "mingw32-filesystem-0:104-2.el8.noarch",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/mingw32-filesystem@104-2.el8?arch=noarch"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "mingw64-filesystem-0:104-2.el8.noarch",
                "product": {
                  "name": "mingw64-filesystem-0:104-2.el8.noarch",
                  "product_id": "mingw64-filesystem-0:104-2.el8.noarch",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/mingw64-filesystem@104-2.el8?arch=noarch"
                  }
                }
              }
            ],
            "category": "architecture",
            "name": "noarch"
          }
        ],
        "category": "vendor",
        "name": "Red Hat"
      }
    ],
    "relationships": [
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "mingw-binutils-0:2.30-3.el8.src as a component of Red Hat CodeReady Linux Builder (v. 8)",
          "product_id": "CRB-8.4.0.GA:mingw-binutils-0:2.30-3.el8.src"
        },
        "product_reference": "mingw-binutils-0:2.30-3.el8.src",
        "relates_to_product_reference": "CRB-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "mingw-binutils-debuginfo-0:2.30-3.el8.aarch64 as a component of Red Hat CodeReady Linux Builder (v. 8)",
          "product_id": "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.aarch64"
        },
        "product_reference": "mingw-binutils-debuginfo-0:2.30-3.el8.aarch64",
        "relates_to_product_reference": "CRB-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "mingw-binutils-debuginfo-0:2.30-3.el8.ppc64le as a component of Red Hat CodeReady Linux Builder (v. 8)",
          "product_id": "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.ppc64le"
        },
        "product_reference": "mingw-binutils-debuginfo-0:2.30-3.el8.ppc64le",
        "relates_to_product_reference": "CRB-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "mingw-binutils-debuginfo-0:2.30-3.el8.s390x as a component of Red Hat CodeReady Linux Builder (v. 8)",
          "product_id": "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.s390x"
        },
        "product_reference": "mingw-binutils-debuginfo-0:2.30-3.el8.s390x",
        "relates_to_product_reference": "CRB-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "mingw-binutils-debuginfo-0:2.30-3.el8.x86_64 as a component of Red Hat CodeReady Linux Builder (v. 8)",
          "product_id": "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.x86_64"
        },
        "product_reference": "mingw-binutils-debuginfo-0:2.30-3.el8.x86_64",
        "relates_to_product_reference": "CRB-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "mingw-binutils-debugsource-0:2.30-3.el8.aarch64 as a component of Red Hat CodeReady Linux Builder (v. 8)",
          "product_id": "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.aarch64"
        },
        "product_reference": "mingw-binutils-debugsource-0:2.30-3.el8.aarch64",
        "relates_to_product_reference": "CRB-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "mingw-binutils-debugsource-0:2.30-3.el8.ppc64le as a component of Red Hat CodeReady Linux Builder (v. 8)",
          "product_id": "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.ppc64le"
        },
        "product_reference": "mingw-binutils-debugsource-0:2.30-3.el8.ppc64le",
        "relates_to_product_reference": "CRB-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "mingw-binutils-debugsource-0:2.30-3.el8.s390x as a component of Red Hat CodeReady Linux Builder (v. 8)",
          "product_id": "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.s390x"
        },
        "product_reference": "mingw-binutils-debugsource-0:2.30-3.el8.s390x",
        "relates_to_product_reference": "CRB-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "mingw-binutils-debugsource-0:2.30-3.el8.x86_64 as a component of Red Hat CodeReady Linux Builder (v. 8)",
          "product_id": "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.x86_64"
        },
        "product_reference": "mingw-binutils-debugsource-0:2.30-3.el8.x86_64",
        "relates_to_product_reference": "CRB-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "mingw-binutils-generic-0:2.30-3.el8.aarch64 as a component of Red Hat CodeReady Linux Builder (v. 8)",
          "product_id": "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.aarch64"
        },
        "product_reference": "mingw-binutils-generic-0:2.30-3.el8.aarch64",
        "relates_to_product_reference": "CRB-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "mingw-binutils-generic-0:2.30-3.el8.ppc64le as a component of Red Hat CodeReady Linux Builder (v. 8)",
          "product_id": "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.ppc64le"
        },
        "product_reference": "mingw-binutils-generic-0:2.30-3.el8.ppc64le",
        "relates_to_product_reference": "CRB-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "mingw-binutils-generic-0:2.30-3.el8.s390x as a component of Red Hat CodeReady Linux Builder (v. 8)",
          "product_id": "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.s390x"
        },
        "product_reference": "mingw-binutils-generic-0:2.30-3.el8.s390x",
        "relates_to_product_reference": "CRB-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "mingw-binutils-generic-0:2.30-3.el8.x86_64 as a component of Red Hat CodeReady Linux Builder (v. 8)",
          "product_id": "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.x86_64"
        },
        "product_reference": "mingw-binutils-generic-0:2.30-3.el8.x86_64",
        "relates_to_product_reference": "CRB-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "mingw-binutils-generic-debuginfo-0:2.30-3.el8.aarch64 as a component of Red Hat CodeReady Linux Builder (v. 8)",
          "product_id": "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.aarch64"
        },
        "product_reference": "mingw-binutils-generic-debuginfo-0:2.30-3.el8.aarch64",
        "relates_to_product_reference": "CRB-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "mingw-binutils-generic-debuginfo-0:2.30-3.el8.ppc64le as a component of Red Hat CodeReady Linux Builder (v. 8)",
          "product_id": "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.ppc64le"
        },
        "product_reference": "mingw-binutils-generic-debuginfo-0:2.30-3.el8.ppc64le",
        "relates_to_product_reference": "CRB-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "mingw-binutils-generic-debuginfo-0:2.30-3.el8.s390x as a component of Red Hat CodeReady Linux Builder (v. 8)",
          "product_id": "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.s390x"
        },
        "product_reference": "mingw-binutils-generic-debuginfo-0:2.30-3.el8.s390x",
        "relates_to_product_reference": "CRB-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "mingw-binutils-generic-debuginfo-0:2.30-3.el8.x86_64 as a component of Red Hat CodeReady Linux Builder (v. 8)",
          "product_id": "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.x86_64"
        },
        "product_reference": "mingw-binutils-generic-debuginfo-0:2.30-3.el8.x86_64",
        "relates_to_product_reference": "CRB-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "mingw-bzip2-0:1.0.6-14.el8.src as a component of Red Hat CodeReady Linux Builder (v. 8)",
          "product_id": "CRB-8.4.0.GA:mingw-bzip2-0:1.0.6-14.el8.src"
        },
        "product_reference": "mingw-bzip2-0:1.0.6-14.el8.src",
        "relates_to_product_reference": "CRB-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "mingw-filesystem-0:104-2.el8.src as a component of Red Hat CodeReady Linux Builder (v. 8)",
          "product_id": "CRB-8.4.0.GA:mingw-filesystem-0:104-2.el8.src"
        },
        "product_reference": "mingw-filesystem-0:104-2.el8.src",
        "relates_to_product_reference": "CRB-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "mingw-filesystem-base-0:104-2.el8.noarch as a component of Red Hat CodeReady Linux Builder (v. 8)",
          "product_id": "CRB-8.4.0.GA:mingw-filesystem-base-0:104-2.el8.noarch"
        },
        "product_reference": "mingw-filesystem-base-0:104-2.el8.noarch",
        "relates_to_product_reference": "CRB-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "mingw-sqlite-0:3.26.0.0-1.el8.src as a component of Red Hat CodeReady Linux Builder (v. 8)",
          "product_id": "CRB-8.4.0.GA:mingw-sqlite-0:3.26.0.0-1.el8.src"
        },
        "product_reference": "mingw-sqlite-0:3.26.0.0-1.el8.src",
        "relates_to_product_reference": "CRB-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "mingw32-binutils-0:2.30-3.el8.aarch64 as a component of Red Hat CodeReady Linux Builder (v. 8)",
          "product_id": "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.aarch64"
        },
        "product_reference": "mingw32-binutils-0:2.30-3.el8.aarch64",
        "relates_to_product_reference": "CRB-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "mingw32-binutils-0:2.30-3.el8.ppc64le as a component of Red Hat CodeReady Linux Builder (v. 8)",
          "product_id": "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.ppc64le"
        },
        "product_reference": "mingw32-binutils-0:2.30-3.el8.ppc64le",
        "relates_to_product_reference": "CRB-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "mingw32-binutils-0:2.30-3.el8.s390x as a component of Red Hat CodeReady Linux Builder (v. 8)",
          "product_id": "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.s390x"
        },
        "product_reference": "mingw32-binutils-0:2.30-3.el8.s390x",
        "relates_to_product_reference": "CRB-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "mingw32-binutils-0:2.30-3.el8.x86_64 as a component of Red Hat CodeReady Linux Builder (v. 8)",
          "product_id": "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.x86_64"
        },
        "product_reference": "mingw32-binutils-0:2.30-3.el8.x86_64",
        "relates_to_product_reference": "CRB-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "mingw32-binutils-debuginfo-0:2.30-3.el8.aarch64 as a component of Red Hat CodeReady Linux Builder (v. 8)",
          "product_id": "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.aarch64"
        },
        "product_reference": "mingw32-binutils-debuginfo-0:2.30-3.el8.aarch64",
        "relates_to_product_reference": "CRB-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "mingw32-binutils-debuginfo-0:2.30-3.el8.ppc64le as a component of Red Hat CodeReady Linux Builder (v. 8)",
          "product_id": "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.ppc64le"
        },
        "product_reference": "mingw32-binutils-debuginfo-0:2.30-3.el8.ppc64le",
        "relates_to_product_reference": "CRB-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "mingw32-binutils-debuginfo-0:2.30-3.el8.s390x as a component of Red Hat CodeReady Linux Builder (v. 8)",
          "product_id": "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.s390x"
        },
        "product_reference": "mingw32-binutils-debuginfo-0:2.30-3.el8.s390x",
        "relates_to_product_reference": "CRB-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "mingw32-binutils-debuginfo-0:2.30-3.el8.x86_64 as a component of Red Hat CodeReady Linux Builder (v. 8)",
          "product_id": "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.x86_64"
        },
        "product_reference": "mingw32-binutils-debuginfo-0:2.30-3.el8.x86_64",
        "relates_to_product_reference": "CRB-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "mingw32-bzip2-0:1.0.6-14.el8.noarch as a component of Red Hat CodeReady Linux Builder (v. 8)",
          "product_id": "CRB-8.4.0.GA:mingw32-bzip2-0:1.0.6-14.el8.noarch"
        },
        "product_reference": "mingw32-bzip2-0:1.0.6-14.el8.noarch",
        "relates_to_product_reference": "CRB-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "mingw32-bzip2-debuginfo-0:1.0.6-14.el8.noarch as a component of Red Hat CodeReady Linux Builder (v. 8)",
          "product_id": "CRB-8.4.0.GA:mingw32-bzip2-debuginfo-0:1.0.6-14.el8.noarch"
        },
        "product_reference": "mingw32-bzip2-debuginfo-0:1.0.6-14.el8.noarch",
        "relates_to_product_reference": "CRB-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "mingw32-bzip2-static-0:1.0.6-14.el8.noarch as a component of Red Hat CodeReady Linux Builder (v. 8)",
          "product_id": "CRB-8.4.0.GA:mingw32-bzip2-static-0:1.0.6-14.el8.noarch"
        },
        "product_reference": "mingw32-bzip2-static-0:1.0.6-14.el8.noarch",
        "relates_to_product_reference": "CRB-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "mingw32-filesystem-0:104-2.el8.noarch as a component of Red Hat CodeReady Linux Builder (v. 8)",
          "product_id": "CRB-8.4.0.GA:mingw32-filesystem-0:104-2.el8.noarch"
        },
        "product_reference": "mingw32-filesystem-0:104-2.el8.noarch",
        "relates_to_product_reference": "CRB-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "mingw32-sqlite-0:3.26.0.0-1.el8.noarch as a component of Red Hat CodeReady Linux Builder (v. 8)",
          "product_id": "CRB-8.4.0.GA:mingw32-sqlite-0:3.26.0.0-1.el8.noarch"
        },
        "product_reference": "mingw32-sqlite-0:3.26.0.0-1.el8.noarch",
        "relates_to_product_reference": "CRB-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "mingw32-sqlite-debuginfo-0:3.26.0.0-1.el8.noarch as a component of Red Hat CodeReady Linux Builder (v. 8)",
          "product_id": "CRB-8.4.0.GA:mingw32-sqlite-debuginfo-0:3.26.0.0-1.el8.noarch"
        },
        "product_reference": "mingw32-sqlite-debuginfo-0:3.26.0.0-1.el8.noarch",
        "relates_to_product_reference": "CRB-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "mingw32-sqlite-static-0:3.26.0.0-1.el8.noarch as a component of Red Hat CodeReady Linux Builder (v. 8)",
          "product_id": "CRB-8.4.0.GA:mingw32-sqlite-static-0:3.26.0.0-1.el8.noarch"
        },
        "product_reference": "mingw32-sqlite-static-0:3.26.0.0-1.el8.noarch",
        "relates_to_product_reference": "CRB-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "mingw64-binutils-0:2.30-3.el8.aarch64 as a component of Red Hat CodeReady Linux Builder (v. 8)",
          "product_id": "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.aarch64"
        },
        "product_reference": "mingw64-binutils-0:2.30-3.el8.aarch64",
        "relates_to_product_reference": "CRB-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "mingw64-binutils-0:2.30-3.el8.ppc64le as a component of Red Hat CodeReady Linux Builder (v. 8)",
          "product_id": "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.ppc64le"
        },
        "product_reference": "mingw64-binutils-0:2.30-3.el8.ppc64le",
        "relates_to_product_reference": "CRB-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "mingw64-binutils-0:2.30-3.el8.s390x as a component of Red Hat CodeReady Linux Builder (v. 8)",
          "product_id": "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.s390x"
        },
        "product_reference": "mingw64-binutils-0:2.30-3.el8.s390x",
        "relates_to_product_reference": "CRB-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "mingw64-binutils-0:2.30-3.el8.x86_64 as a component of Red Hat CodeReady Linux Builder (v. 8)",
          "product_id": "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.x86_64"
        },
        "product_reference": "mingw64-binutils-0:2.30-3.el8.x86_64",
        "relates_to_product_reference": "CRB-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "mingw64-binutils-debuginfo-0:2.30-3.el8.aarch64 as a component of Red Hat CodeReady Linux Builder (v. 8)",
          "product_id": "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.aarch64"
        },
        "product_reference": "mingw64-binutils-debuginfo-0:2.30-3.el8.aarch64",
        "relates_to_product_reference": "CRB-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "mingw64-binutils-debuginfo-0:2.30-3.el8.ppc64le as a component of Red Hat CodeReady Linux Builder (v. 8)",
          "product_id": "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.ppc64le"
        },
        "product_reference": "mingw64-binutils-debuginfo-0:2.30-3.el8.ppc64le",
        "relates_to_product_reference": "CRB-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "mingw64-binutils-debuginfo-0:2.30-3.el8.s390x as a component of Red Hat CodeReady Linux Builder (v. 8)",
          "product_id": "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.s390x"
        },
        "product_reference": "mingw64-binutils-debuginfo-0:2.30-3.el8.s390x",
        "relates_to_product_reference": "CRB-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "mingw64-binutils-debuginfo-0:2.30-3.el8.x86_64 as a component of Red Hat CodeReady Linux Builder (v. 8)",
          "product_id": "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.x86_64"
        },
        "product_reference": "mingw64-binutils-debuginfo-0:2.30-3.el8.x86_64",
        "relates_to_product_reference": "CRB-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "mingw64-bzip2-0:1.0.6-14.el8.noarch as a component of Red Hat CodeReady Linux Builder (v. 8)",
          "product_id": "CRB-8.4.0.GA:mingw64-bzip2-0:1.0.6-14.el8.noarch"
        },
        "product_reference": "mingw64-bzip2-0:1.0.6-14.el8.noarch",
        "relates_to_product_reference": "CRB-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "mingw64-bzip2-debuginfo-0:1.0.6-14.el8.noarch as a component of Red Hat CodeReady Linux Builder (v. 8)",
          "product_id": "CRB-8.4.0.GA:mingw64-bzip2-debuginfo-0:1.0.6-14.el8.noarch"
        },
        "product_reference": "mingw64-bzip2-debuginfo-0:1.0.6-14.el8.noarch",
        "relates_to_product_reference": "CRB-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "mingw64-bzip2-static-0:1.0.6-14.el8.noarch as a component of Red Hat CodeReady Linux Builder (v. 8)",
          "product_id": "CRB-8.4.0.GA:mingw64-bzip2-static-0:1.0.6-14.el8.noarch"
        },
        "product_reference": "mingw64-bzip2-static-0:1.0.6-14.el8.noarch",
        "relates_to_product_reference": "CRB-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "mingw64-filesystem-0:104-2.el8.noarch as a component of Red Hat CodeReady Linux Builder (v. 8)",
          "product_id": "CRB-8.4.0.GA:mingw64-filesystem-0:104-2.el8.noarch"
        },
        "product_reference": "mingw64-filesystem-0:104-2.el8.noarch",
        "relates_to_product_reference": "CRB-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "mingw64-sqlite-0:3.26.0.0-1.el8.noarch as a component of Red Hat CodeReady Linux Builder (v. 8)",
          "product_id": "CRB-8.4.0.GA:mingw64-sqlite-0:3.26.0.0-1.el8.noarch"
        },
        "product_reference": "mingw64-sqlite-0:3.26.0.0-1.el8.noarch",
        "relates_to_product_reference": "CRB-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "mingw64-sqlite-debuginfo-0:3.26.0.0-1.el8.noarch as a component of Red Hat CodeReady Linux Builder (v. 8)",
          "product_id": "CRB-8.4.0.GA:mingw64-sqlite-debuginfo-0:3.26.0.0-1.el8.noarch"
        },
        "product_reference": "mingw64-sqlite-debuginfo-0:3.26.0.0-1.el8.noarch",
        "relates_to_product_reference": "CRB-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "mingw64-sqlite-static-0:3.26.0.0-1.el8.noarch as a component of Red Hat CodeReady Linux Builder (v. 8)",
          "product_id": "CRB-8.4.0.GA:mingw64-sqlite-static-0:3.26.0.0-1.el8.noarch"
        },
        "product_reference": "mingw64-sqlite-static-0:3.26.0.0-1.el8.noarch",
        "relates_to_product_reference": "CRB-8.4.0.GA"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2019-16168",
      "cwe": {
        "id": "CWE-369",
        "name": "Divide By Zero"
      },
      "discovery_date": "2019-11-05T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1768986"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "In SQLite through 3.29.0, whereLoopAddBtreeIndex in sqlite3.c can crash a browser or other application because of missing validation of a sqlite_stat1 sz field, aka a \"severe division by zero in the query planner.\"",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "sqlite: Division by zero in whereLoopAddBtreeIndex in sqlite3.c",
          "title": "Vulnerability summary"
        },
        {
          "category": "other",
          "text": "The SQLite package as shipped with Red Hat Enterprise Linux 7 and previous versions are not affected by this flaw. The bug was introduced on sqlite-3.8.5 while Red Hat Enterprise Linux 7 and previous releases ships sqlite \u003c= 3.7.17.",
          "title": "Statement"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "CRB-8.4.0.GA:mingw-binutils-0:2.30-3.el8.src",
          "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.aarch64",
          "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.ppc64le",
          "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.s390x",
          "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.x86_64",
          "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.aarch64",
          "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.ppc64le",
          "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.s390x",
          "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.x86_64",
          "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.aarch64",
          "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.ppc64le",
          "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.s390x",
          "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.x86_64",
          "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.aarch64",
          "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.ppc64le",
          "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.s390x",
          "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.x86_64",
          "CRB-8.4.0.GA:mingw-bzip2-0:1.0.6-14.el8.src",
          "CRB-8.4.0.GA:mingw-filesystem-0:104-2.el8.src",
          "CRB-8.4.0.GA:mingw-filesystem-base-0:104-2.el8.noarch",
          "CRB-8.4.0.GA:mingw-sqlite-0:3.26.0.0-1.el8.src",
          "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.aarch64",
          "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.ppc64le",
          "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.s390x",
          "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.x86_64",
          "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.aarch64",
          "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.ppc64le",
          "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.s390x",
          "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.x86_64",
          "CRB-8.4.0.GA:mingw32-bzip2-0:1.0.6-14.el8.noarch",
          "CRB-8.4.0.GA:mingw32-bzip2-debuginfo-0:1.0.6-14.el8.noarch",
          "CRB-8.4.0.GA:mingw32-bzip2-static-0:1.0.6-14.el8.noarch",
          "CRB-8.4.0.GA:mingw32-filesystem-0:104-2.el8.noarch",
          "CRB-8.4.0.GA:mingw32-sqlite-0:3.26.0.0-1.el8.noarch",
          "CRB-8.4.0.GA:mingw32-sqlite-debuginfo-0:3.26.0.0-1.el8.noarch",
          "CRB-8.4.0.GA:mingw32-sqlite-static-0:3.26.0.0-1.el8.noarch",
          "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.aarch64",
          "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.ppc64le",
          "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.s390x",
          "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.x86_64",
          "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.aarch64",
          "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.ppc64le",
          "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.s390x",
          "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.x86_64",
          "CRB-8.4.0.GA:mingw64-bzip2-0:1.0.6-14.el8.noarch",
          "CRB-8.4.0.GA:mingw64-bzip2-debuginfo-0:1.0.6-14.el8.noarch",
          "CRB-8.4.0.GA:mingw64-bzip2-static-0:1.0.6-14.el8.noarch",
          "CRB-8.4.0.GA:mingw64-filesystem-0:104-2.el8.noarch",
          "CRB-8.4.0.GA:mingw64-sqlite-0:3.26.0.0-1.el8.noarch",
          "CRB-8.4.0.GA:mingw64-sqlite-debuginfo-0:3.26.0.0-1.el8.noarch",
          "CRB-8.4.0.GA:mingw64-sqlite-static-0:3.26.0.0-1.el8.noarch"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2019-16168"
        },
        {
          "category": "external",
          "summary": "RHBZ#1768986",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1768986"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2019-16168",
          "url": "https://www.cve.org/CVERecord?id=CVE-2019-16168"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2019-16168",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2019-16168"
        }
      ],
      "release_date": "2019-08-15T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2021-05-18T15:23:23+00:00",
          "details": "For details on how to apply this update, which includes the changes described in this advisory, refer to:\n\nhttps://access.redhat.com/articles/11258",
          "product_ids": [
            "CRB-8.4.0.GA:mingw-binutils-0:2.30-3.el8.src",
            "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw-bzip2-0:1.0.6-14.el8.src",
            "CRB-8.4.0.GA:mingw-filesystem-0:104-2.el8.src",
            "CRB-8.4.0.GA:mingw-filesystem-base-0:104-2.el8.noarch",
            "CRB-8.4.0.GA:mingw-sqlite-0:3.26.0.0-1.el8.src",
            "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw32-bzip2-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw32-bzip2-debuginfo-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw32-bzip2-static-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw32-filesystem-0:104-2.el8.noarch",
            "CRB-8.4.0.GA:mingw32-sqlite-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw32-sqlite-debuginfo-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw32-sqlite-static-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw64-bzip2-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw64-bzip2-debuginfo-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw64-bzip2-static-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw64-filesystem-0:104-2.el8.noarch",
            "CRB-8.4.0.GA:mingw64-sqlite-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw64-sqlite-debuginfo-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw64-sqlite-static-0:3.26.0.0-1.el8.noarch"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2021:1968"
        },
        {
          "category": "workaround",
          "details": "An user can mitigate the risk of this vulnerability by:\n\n1) Avoid using ANALYZE command on queries;\n2) Disabling the PRAGMA optimize for affected SQLite instances;",
          "product_ids": [
            "CRB-8.4.0.GA:mingw-binutils-0:2.30-3.el8.src",
            "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw-bzip2-0:1.0.6-14.el8.src",
            "CRB-8.4.0.GA:mingw-filesystem-0:104-2.el8.src",
            "CRB-8.4.0.GA:mingw-filesystem-base-0:104-2.el8.noarch",
            "CRB-8.4.0.GA:mingw-sqlite-0:3.26.0.0-1.el8.src",
            "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw32-bzip2-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw32-bzip2-debuginfo-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw32-bzip2-static-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw32-filesystem-0:104-2.el8.noarch",
            "CRB-8.4.0.GA:mingw32-sqlite-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw32-sqlite-debuginfo-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw32-sqlite-static-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw64-bzip2-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw64-bzip2-debuginfo-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw64-bzip2-static-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw64-filesystem-0:104-2.el8.noarch",
            "CRB-8.4.0.GA:mingw64-sqlite-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw64-sqlite-debuginfo-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw64-sqlite-static-0:3.26.0.0-1.el8.noarch"
          ]
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "REQUIRED",
            "vectorString": "CVSS:3.0/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H",
            "version": "3.0"
          },
          "products": [
            "CRB-8.4.0.GA:mingw-binutils-0:2.30-3.el8.src",
            "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw-bzip2-0:1.0.6-14.el8.src",
            "CRB-8.4.0.GA:mingw-filesystem-0:104-2.el8.src",
            "CRB-8.4.0.GA:mingw-filesystem-base-0:104-2.el8.noarch",
            "CRB-8.4.0.GA:mingw-sqlite-0:3.26.0.0-1.el8.src",
            "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw32-bzip2-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw32-bzip2-debuginfo-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw32-bzip2-static-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw32-filesystem-0:104-2.el8.noarch",
            "CRB-8.4.0.GA:mingw32-sqlite-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw32-sqlite-debuginfo-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw32-sqlite-static-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw64-bzip2-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw64-bzip2-debuginfo-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw64-bzip2-static-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw64-filesystem-0:104-2.el8.noarch",
            "CRB-8.4.0.GA:mingw64-sqlite-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw64-sqlite-debuginfo-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw64-sqlite-static-0:3.26.0.0-1.el8.noarch"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Moderate"
        }
      ],
      "title": "sqlite: Division by zero in whereLoopAddBtreeIndex in sqlite3.c"
    },
    {
      "cve": "CVE-2020-13434",
      "cwe": {
        "id": "CWE-121",
        "name": "Stack-based Buffer Overflow"
      },
      "discovery_date": "2020-05-24T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1841223"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "An integer overflow flaw was found in the SQLite implementation of the printf() function. This flaw allows an attacker who can control the precision of floating-point conversions, to crash the application, resulting in a denial of service.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "sqlite: integer overflow in sqlite3_str_vappendf function in printf.c",
          "title": "Vulnerability summary"
        },
        {
          "category": "other",
          "text": "This flaw did not affect the versions of SQLite as shipped with Red Hat Enterprise Linux 7 as they did not include support for the printf() function, which was introduced in a later version of the package.",
          "title": "Statement"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "CRB-8.4.0.GA:mingw-binutils-0:2.30-3.el8.src",
          "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.aarch64",
          "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.ppc64le",
          "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.s390x",
          "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.x86_64",
          "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.aarch64",
          "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.ppc64le",
          "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.s390x",
          "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.x86_64",
          "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.aarch64",
          "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.ppc64le",
          "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.s390x",
          "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.x86_64",
          "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.aarch64",
          "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.ppc64le",
          "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.s390x",
          "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.x86_64",
          "CRB-8.4.0.GA:mingw-bzip2-0:1.0.6-14.el8.src",
          "CRB-8.4.0.GA:mingw-filesystem-0:104-2.el8.src",
          "CRB-8.4.0.GA:mingw-filesystem-base-0:104-2.el8.noarch",
          "CRB-8.4.0.GA:mingw-sqlite-0:3.26.0.0-1.el8.src",
          "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.aarch64",
          "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.ppc64le",
          "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.s390x",
          "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.x86_64",
          "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.aarch64",
          "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.ppc64le",
          "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.s390x",
          "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.x86_64",
          "CRB-8.4.0.GA:mingw32-bzip2-0:1.0.6-14.el8.noarch",
          "CRB-8.4.0.GA:mingw32-bzip2-debuginfo-0:1.0.6-14.el8.noarch",
          "CRB-8.4.0.GA:mingw32-bzip2-static-0:1.0.6-14.el8.noarch",
          "CRB-8.4.0.GA:mingw32-filesystem-0:104-2.el8.noarch",
          "CRB-8.4.0.GA:mingw32-sqlite-0:3.26.0.0-1.el8.noarch",
          "CRB-8.4.0.GA:mingw32-sqlite-debuginfo-0:3.26.0.0-1.el8.noarch",
          "CRB-8.4.0.GA:mingw32-sqlite-static-0:3.26.0.0-1.el8.noarch",
          "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.aarch64",
          "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.ppc64le",
          "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.s390x",
          "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.x86_64",
          "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.aarch64",
          "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.ppc64le",
          "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.s390x",
          "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.x86_64",
          "CRB-8.4.0.GA:mingw64-bzip2-0:1.0.6-14.el8.noarch",
          "CRB-8.4.0.GA:mingw64-bzip2-debuginfo-0:1.0.6-14.el8.noarch",
          "CRB-8.4.0.GA:mingw64-bzip2-static-0:1.0.6-14.el8.noarch",
          "CRB-8.4.0.GA:mingw64-filesystem-0:104-2.el8.noarch",
          "CRB-8.4.0.GA:mingw64-sqlite-0:3.26.0.0-1.el8.noarch",
          "CRB-8.4.0.GA:mingw64-sqlite-debuginfo-0:3.26.0.0-1.el8.noarch",
          "CRB-8.4.0.GA:mingw64-sqlite-static-0:3.26.0.0-1.el8.noarch"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2020-13434"
        },
        {
          "category": "external",
          "summary": "RHBZ#1841223",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1841223"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2020-13434",
          "url": "https://www.cve.org/CVERecord?id=CVE-2020-13434"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2020-13434",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2020-13434"
        }
      ],
      "release_date": "2020-05-23T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2021-05-18T15:23:23+00:00",
          "details": "For details on how to apply this update, which includes the changes described in this advisory, refer to:\n\nhttps://access.redhat.com/articles/11258",
          "product_ids": [
            "CRB-8.4.0.GA:mingw-binutils-0:2.30-3.el8.src",
            "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw-bzip2-0:1.0.6-14.el8.src",
            "CRB-8.4.0.GA:mingw-filesystem-0:104-2.el8.src",
            "CRB-8.4.0.GA:mingw-filesystem-base-0:104-2.el8.noarch",
            "CRB-8.4.0.GA:mingw-sqlite-0:3.26.0.0-1.el8.src",
            "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw32-bzip2-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw32-bzip2-debuginfo-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw32-bzip2-static-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw32-filesystem-0:104-2.el8.noarch",
            "CRB-8.4.0.GA:mingw32-sqlite-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw32-sqlite-debuginfo-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw32-sqlite-static-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw64-bzip2-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw64-bzip2-debuginfo-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw64-bzip2-static-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw64-filesystem-0:104-2.el8.noarch",
            "CRB-8.4.0.GA:mingw64-sqlite-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw64-sqlite-debuginfo-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw64-sqlite-static-0:3.26.0.0-1.el8.noarch"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2021:1968"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "LOCAL",
            "availabilityImpact": "HIGH",
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "LOW",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CRB-8.4.0.GA:mingw-binutils-0:2.30-3.el8.src",
            "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw-bzip2-0:1.0.6-14.el8.src",
            "CRB-8.4.0.GA:mingw-filesystem-0:104-2.el8.src",
            "CRB-8.4.0.GA:mingw-filesystem-base-0:104-2.el8.noarch",
            "CRB-8.4.0.GA:mingw-sqlite-0:3.26.0.0-1.el8.src",
            "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw32-bzip2-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw32-bzip2-debuginfo-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw32-bzip2-static-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw32-filesystem-0:104-2.el8.noarch",
            "CRB-8.4.0.GA:mingw32-sqlite-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw32-sqlite-debuginfo-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw32-sqlite-static-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw64-bzip2-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw64-bzip2-debuginfo-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw64-bzip2-static-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw64-filesystem-0:104-2.el8.noarch",
            "CRB-8.4.0.GA:mingw64-sqlite-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw64-sqlite-debuginfo-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw64-sqlite-static-0:3.26.0.0-1.el8.noarch"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Moderate"
        }
      ],
      "title": "sqlite: integer overflow in sqlite3_str_vappendf function in printf.c"
    },
    {
      "cve": "CVE-2020-13630",
      "cwe": {
        "id": "CWE-416",
        "name": "Use After Free"
      },
      "discovery_date": "2020-05-27T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1841562"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "A use-after-free vulnerability was found in the SQLite FTS3 extension module in the way it implemented the snippet function. This flaw allows an attacker who can execute SQL statements to crash the application or potentially execute arbitrary code.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "sqlite: Use-after-free in fts3EvalNextRow in ext/fts3/fts3.c",
          "title": "Vulnerability summary"
        },
        {
          "category": "other",
          "text": "This flaw did not affect the versions of SQLite as shipped with Red Hat Enterprise Linux 7 as they did not include the vulnerable code, which was introduced in a later version of the package.",
          "title": "Statement"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "CRB-8.4.0.GA:mingw-binutils-0:2.30-3.el8.src",
          "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.aarch64",
          "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.ppc64le",
          "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.s390x",
          "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.x86_64",
          "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.aarch64",
          "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.ppc64le",
          "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.s390x",
          "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.x86_64",
          "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.aarch64",
          "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.ppc64le",
          "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.s390x",
          "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.x86_64",
          "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.aarch64",
          "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.ppc64le",
          "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.s390x",
          "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.x86_64",
          "CRB-8.4.0.GA:mingw-bzip2-0:1.0.6-14.el8.src",
          "CRB-8.4.0.GA:mingw-filesystem-0:104-2.el8.src",
          "CRB-8.4.0.GA:mingw-filesystem-base-0:104-2.el8.noarch",
          "CRB-8.4.0.GA:mingw-sqlite-0:3.26.0.0-1.el8.src",
          "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.aarch64",
          "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.ppc64le",
          "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.s390x",
          "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.x86_64",
          "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.aarch64",
          "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.ppc64le",
          "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.s390x",
          "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.x86_64",
          "CRB-8.4.0.GA:mingw32-bzip2-0:1.0.6-14.el8.noarch",
          "CRB-8.4.0.GA:mingw32-bzip2-debuginfo-0:1.0.6-14.el8.noarch",
          "CRB-8.4.0.GA:mingw32-bzip2-static-0:1.0.6-14.el8.noarch",
          "CRB-8.4.0.GA:mingw32-filesystem-0:104-2.el8.noarch",
          "CRB-8.4.0.GA:mingw32-sqlite-0:3.26.0.0-1.el8.noarch",
          "CRB-8.4.0.GA:mingw32-sqlite-debuginfo-0:3.26.0.0-1.el8.noarch",
          "CRB-8.4.0.GA:mingw32-sqlite-static-0:3.26.0.0-1.el8.noarch",
          "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.aarch64",
          "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.ppc64le",
          "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.s390x",
          "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.x86_64",
          "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.aarch64",
          "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.ppc64le",
          "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.s390x",
          "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.x86_64",
          "CRB-8.4.0.GA:mingw64-bzip2-0:1.0.6-14.el8.noarch",
          "CRB-8.4.0.GA:mingw64-bzip2-debuginfo-0:1.0.6-14.el8.noarch",
          "CRB-8.4.0.GA:mingw64-bzip2-static-0:1.0.6-14.el8.noarch",
          "CRB-8.4.0.GA:mingw64-filesystem-0:104-2.el8.noarch",
          "CRB-8.4.0.GA:mingw64-sqlite-0:3.26.0.0-1.el8.noarch",
          "CRB-8.4.0.GA:mingw64-sqlite-debuginfo-0:3.26.0.0-1.el8.noarch",
          "CRB-8.4.0.GA:mingw64-sqlite-static-0:3.26.0.0-1.el8.noarch"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2020-13630"
        },
        {
          "category": "external",
          "summary": "RHBZ#1841562",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1841562"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2020-13630",
          "url": "https://www.cve.org/CVERecord?id=CVE-2020-13630"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2020-13630",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2020-13630"
        }
      ],
      "release_date": "2020-05-16T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2021-05-18T15:23:23+00:00",
          "details": "For details on how to apply this update, which includes the changes described in this advisory, refer to:\n\nhttps://access.redhat.com/articles/11258",
          "product_ids": [
            "CRB-8.4.0.GA:mingw-binutils-0:2.30-3.el8.src",
            "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw-bzip2-0:1.0.6-14.el8.src",
            "CRB-8.4.0.GA:mingw-filesystem-0:104-2.el8.src",
            "CRB-8.4.0.GA:mingw-filesystem-base-0:104-2.el8.noarch",
            "CRB-8.4.0.GA:mingw-sqlite-0:3.26.0.0-1.el8.src",
            "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw32-bzip2-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw32-bzip2-debuginfo-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw32-bzip2-static-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw32-filesystem-0:104-2.el8.noarch",
            "CRB-8.4.0.GA:mingw32-sqlite-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw32-sqlite-debuginfo-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw32-sqlite-static-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw64-bzip2-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw64-bzip2-debuginfo-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw64-bzip2-static-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw64-filesystem-0:104-2.el8.noarch",
            "CRB-8.4.0.GA:mingw64-sqlite-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw64-sqlite-debuginfo-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw64-sqlite-static-0:3.26.0.0-1.el8.noarch"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2021:1968"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "HIGH",
            "attackVector": "LOCAL",
            "availabilityImpact": "HIGH",
            "baseScore": 7.0,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "HIGH",
            "integrityImpact": "HIGH",
            "privilegesRequired": "LOW",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CRB-8.4.0.GA:mingw-binutils-0:2.30-3.el8.src",
            "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw-bzip2-0:1.0.6-14.el8.src",
            "CRB-8.4.0.GA:mingw-filesystem-0:104-2.el8.src",
            "CRB-8.4.0.GA:mingw-filesystem-base-0:104-2.el8.noarch",
            "CRB-8.4.0.GA:mingw-sqlite-0:3.26.0.0-1.el8.src",
            "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw32-bzip2-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw32-bzip2-debuginfo-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw32-bzip2-static-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw32-filesystem-0:104-2.el8.noarch",
            "CRB-8.4.0.GA:mingw32-sqlite-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw32-sqlite-debuginfo-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw32-sqlite-static-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw64-bzip2-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw64-bzip2-debuginfo-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw64-bzip2-static-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw64-filesystem-0:104-2.el8.noarch",
            "CRB-8.4.0.GA:mingw64-sqlite-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw64-sqlite-debuginfo-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw64-sqlite-static-0:3.26.0.0-1.el8.noarch"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Moderate"
        }
      ],
      "title": "sqlite: Use-after-free in fts3EvalNextRow in ext/fts3/fts3.c"
    },
    {
      "cve": "CVE-2020-13631",
      "cwe": {
        "id": "CWE-20",
        "name": "Improper Input Validation"
      },
      "discovery_date": "2020-05-27T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1841568"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "A flaw was found in the virtual table implementation of SQLite. This flaw allows an attacker who can execute SQL statements to rename a virtual table to the name of one of its shadow tables, leading to potential data corruption.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "sqlite: Virtual table can be renamed into the name of one of its shadow tables",
          "title": "Vulnerability summary"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "CRB-8.4.0.GA:mingw-binutils-0:2.30-3.el8.src",
          "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.aarch64",
          "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.ppc64le",
          "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.s390x",
          "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.x86_64",
          "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.aarch64",
          "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.ppc64le",
          "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.s390x",
          "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.x86_64",
          "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.aarch64",
          "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.ppc64le",
          "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.s390x",
          "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.x86_64",
          "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.aarch64",
          "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.ppc64le",
          "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.s390x",
          "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.x86_64",
          "CRB-8.4.0.GA:mingw-bzip2-0:1.0.6-14.el8.src",
          "CRB-8.4.0.GA:mingw-filesystem-0:104-2.el8.src",
          "CRB-8.4.0.GA:mingw-filesystem-base-0:104-2.el8.noarch",
          "CRB-8.4.0.GA:mingw-sqlite-0:3.26.0.0-1.el8.src",
          "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.aarch64",
          "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.ppc64le",
          "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.s390x",
          "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.x86_64",
          "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.aarch64",
          "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.ppc64le",
          "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.s390x",
          "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.x86_64",
          "CRB-8.4.0.GA:mingw32-bzip2-0:1.0.6-14.el8.noarch",
          "CRB-8.4.0.GA:mingw32-bzip2-debuginfo-0:1.0.6-14.el8.noarch",
          "CRB-8.4.0.GA:mingw32-bzip2-static-0:1.0.6-14.el8.noarch",
          "CRB-8.4.0.GA:mingw32-filesystem-0:104-2.el8.noarch",
          "CRB-8.4.0.GA:mingw32-sqlite-0:3.26.0.0-1.el8.noarch",
          "CRB-8.4.0.GA:mingw32-sqlite-debuginfo-0:3.26.0.0-1.el8.noarch",
          "CRB-8.4.0.GA:mingw32-sqlite-static-0:3.26.0.0-1.el8.noarch",
          "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.aarch64",
          "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.ppc64le",
          "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.s390x",
          "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.x86_64",
          "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.aarch64",
          "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.ppc64le",
          "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.s390x",
          "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.x86_64",
          "CRB-8.4.0.GA:mingw64-bzip2-0:1.0.6-14.el8.noarch",
          "CRB-8.4.0.GA:mingw64-bzip2-debuginfo-0:1.0.6-14.el8.noarch",
          "CRB-8.4.0.GA:mingw64-bzip2-static-0:1.0.6-14.el8.noarch",
          "CRB-8.4.0.GA:mingw64-filesystem-0:104-2.el8.noarch",
          "CRB-8.4.0.GA:mingw64-sqlite-0:3.26.0.0-1.el8.noarch",
          "CRB-8.4.0.GA:mingw64-sqlite-debuginfo-0:3.26.0.0-1.el8.noarch",
          "CRB-8.4.0.GA:mingw64-sqlite-static-0:3.26.0.0-1.el8.noarch"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2020-13631"
        },
        {
          "category": "external",
          "summary": "RHBZ#1841568",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1841568"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2020-13631",
          "url": "https://www.cve.org/CVERecord?id=CVE-2020-13631"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2020-13631",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2020-13631"
        }
      ],
      "release_date": "2020-05-14T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2021-05-18T15:23:23+00:00",
          "details": "For details on how to apply this update, which includes the changes described in this advisory, refer to:\n\nhttps://access.redhat.com/articles/11258",
          "product_ids": [
            "CRB-8.4.0.GA:mingw-binutils-0:2.30-3.el8.src",
            "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw-bzip2-0:1.0.6-14.el8.src",
            "CRB-8.4.0.GA:mingw-filesystem-0:104-2.el8.src",
            "CRB-8.4.0.GA:mingw-filesystem-base-0:104-2.el8.noarch",
            "CRB-8.4.0.GA:mingw-sqlite-0:3.26.0.0-1.el8.src",
            "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw32-bzip2-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw32-bzip2-debuginfo-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw32-bzip2-static-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw32-filesystem-0:104-2.el8.noarch",
            "CRB-8.4.0.GA:mingw32-sqlite-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw32-sqlite-debuginfo-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw32-sqlite-static-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw64-bzip2-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw64-bzip2-debuginfo-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw64-bzip2-static-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw64-filesystem-0:104-2.el8.noarch",
            "CRB-8.4.0.GA:mingw64-sqlite-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw64-sqlite-debuginfo-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw64-sqlite-static-0:3.26.0.0-1.el8.noarch"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2021:1968"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "LOCAL",
            "availabilityImpact": "NONE",
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "NONE",
            "integrityImpact": "HIGH",
            "privilegesRequired": "LOW",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:H/A:N",
            "version": "3.1"
          },
          "products": [
            "CRB-8.4.0.GA:mingw-binutils-0:2.30-3.el8.src",
            "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw-bzip2-0:1.0.6-14.el8.src",
            "CRB-8.4.0.GA:mingw-filesystem-0:104-2.el8.src",
            "CRB-8.4.0.GA:mingw-filesystem-base-0:104-2.el8.noarch",
            "CRB-8.4.0.GA:mingw-sqlite-0:3.26.0.0-1.el8.src",
            "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw32-bzip2-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw32-bzip2-debuginfo-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw32-bzip2-static-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw32-filesystem-0:104-2.el8.noarch",
            "CRB-8.4.0.GA:mingw32-sqlite-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw32-sqlite-debuginfo-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw32-sqlite-static-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw64-bzip2-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw64-bzip2-debuginfo-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw64-bzip2-static-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw64-filesystem-0:104-2.el8.noarch",
            "CRB-8.4.0.GA:mingw64-sqlite-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw64-sqlite-debuginfo-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw64-sqlite-static-0:3.26.0.0-1.el8.noarch"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Moderate"
        }
      ],
      "title": "sqlite: Virtual table can be renamed into the name of one of its shadow tables"
    },
    {
      "cve": "CVE-2020-13632",
      "cwe": {
        "id": "CWE-476",
        "name": "NULL Pointer Dereference"
      },
      "discovery_date": "2020-05-27T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1841574"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "A NULL pointer dereference flaw was found in the matchinfo auxiliary function of the SQLite FTS3 extension module. This flaw allows an attacker who can execute SQL statements to crash the application, resulting in a denial of service.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "sqlite: NULL pointer dereference in ext/fts3/fts3_snippet.c via a crafted matchinfo() query",
          "title": "Vulnerability summary"
        },
        {
          "category": "other",
          "text": "This flaw did not affect the versions of SQLite as shipped with Red Hat Enterprise Linux 7 as they did not include the vulnerable code, which was introduced in a later version of the package.",
          "title": "Statement"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "CRB-8.4.0.GA:mingw-binutils-0:2.30-3.el8.src",
          "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.aarch64",
          "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.ppc64le",
          "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.s390x",
          "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.x86_64",
          "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.aarch64",
          "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.ppc64le",
          "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.s390x",
          "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.x86_64",
          "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.aarch64",
          "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.ppc64le",
          "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.s390x",
          "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.x86_64",
          "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.aarch64",
          "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.ppc64le",
          "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.s390x",
          "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.x86_64",
          "CRB-8.4.0.GA:mingw-bzip2-0:1.0.6-14.el8.src",
          "CRB-8.4.0.GA:mingw-filesystem-0:104-2.el8.src",
          "CRB-8.4.0.GA:mingw-filesystem-base-0:104-2.el8.noarch",
          "CRB-8.4.0.GA:mingw-sqlite-0:3.26.0.0-1.el8.src",
          "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.aarch64",
          "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.ppc64le",
          "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.s390x",
          "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.x86_64",
          "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.aarch64",
          "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.ppc64le",
          "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.s390x",
          "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.x86_64",
          "CRB-8.4.0.GA:mingw32-bzip2-0:1.0.6-14.el8.noarch",
          "CRB-8.4.0.GA:mingw32-bzip2-debuginfo-0:1.0.6-14.el8.noarch",
          "CRB-8.4.0.GA:mingw32-bzip2-static-0:1.0.6-14.el8.noarch",
          "CRB-8.4.0.GA:mingw32-filesystem-0:104-2.el8.noarch",
          "CRB-8.4.0.GA:mingw32-sqlite-0:3.26.0.0-1.el8.noarch",
          "CRB-8.4.0.GA:mingw32-sqlite-debuginfo-0:3.26.0.0-1.el8.noarch",
          "CRB-8.4.0.GA:mingw32-sqlite-static-0:3.26.0.0-1.el8.noarch",
          "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.aarch64",
          "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.ppc64le",
          "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.s390x",
          "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.x86_64",
          "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.aarch64",
          "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.ppc64le",
          "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.s390x",
          "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.x86_64",
          "CRB-8.4.0.GA:mingw64-bzip2-0:1.0.6-14.el8.noarch",
          "CRB-8.4.0.GA:mingw64-bzip2-debuginfo-0:1.0.6-14.el8.noarch",
          "CRB-8.4.0.GA:mingw64-bzip2-static-0:1.0.6-14.el8.noarch",
          "CRB-8.4.0.GA:mingw64-filesystem-0:104-2.el8.noarch",
          "CRB-8.4.0.GA:mingw64-sqlite-0:3.26.0.0-1.el8.noarch",
          "CRB-8.4.0.GA:mingw64-sqlite-debuginfo-0:3.26.0.0-1.el8.noarch",
          "CRB-8.4.0.GA:mingw64-sqlite-static-0:3.26.0.0-1.el8.noarch"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2020-13632"
        },
        {
          "category": "external",
          "summary": "RHBZ#1841574",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1841574"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2020-13632",
          "url": "https://www.cve.org/CVERecord?id=CVE-2020-13632"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2020-13632",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2020-13632"
        }
      ],
      "release_date": "2020-05-14T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2021-05-18T15:23:23+00:00",
          "details": "For details on how to apply this update, which includes the changes described in this advisory, refer to:\n\nhttps://access.redhat.com/articles/11258",
          "product_ids": [
            "CRB-8.4.0.GA:mingw-binutils-0:2.30-3.el8.src",
            "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw-bzip2-0:1.0.6-14.el8.src",
            "CRB-8.4.0.GA:mingw-filesystem-0:104-2.el8.src",
            "CRB-8.4.0.GA:mingw-filesystem-base-0:104-2.el8.noarch",
            "CRB-8.4.0.GA:mingw-sqlite-0:3.26.0.0-1.el8.src",
            "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw32-bzip2-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw32-bzip2-debuginfo-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw32-bzip2-static-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw32-filesystem-0:104-2.el8.noarch",
            "CRB-8.4.0.GA:mingw32-sqlite-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw32-sqlite-debuginfo-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw32-sqlite-static-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw64-bzip2-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw64-bzip2-debuginfo-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw64-bzip2-static-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw64-filesystem-0:104-2.el8.noarch",
            "CRB-8.4.0.GA:mingw64-sqlite-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw64-sqlite-debuginfo-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw64-sqlite-static-0:3.26.0.0-1.el8.noarch"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2021:1968"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "LOCAL",
            "availabilityImpact": "HIGH",
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "LOW",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "CRB-8.4.0.GA:mingw-binutils-0:2.30-3.el8.src",
            "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw-binutils-debuginfo-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw-binutils-debugsource-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw-binutils-generic-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw-binutils-generic-debuginfo-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw-bzip2-0:1.0.6-14.el8.src",
            "CRB-8.4.0.GA:mingw-filesystem-0:104-2.el8.src",
            "CRB-8.4.0.GA:mingw-filesystem-base-0:104-2.el8.noarch",
            "CRB-8.4.0.GA:mingw-sqlite-0:3.26.0.0-1.el8.src",
            "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw32-binutils-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw32-binutils-debuginfo-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw32-bzip2-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw32-bzip2-debuginfo-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw32-bzip2-static-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw32-filesystem-0:104-2.el8.noarch",
            "CRB-8.4.0.GA:mingw32-sqlite-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw32-sqlite-debuginfo-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw32-sqlite-static-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw64-binutils-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.aarch64",
            "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.ppc64le",
            "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.s390x",
            "CRB-8.4.0.GA:mingw64-binutils-debuginfo-0:2.30-3.el8.x86_64",
            "CRB-8.4.0.GA:mingw64-bzip2-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw64-bzip2-debuginfo-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw64-bzip2-static-0:1.0.6-14.el8.noarch",
            "CRB-8.4.0.GA:mingw64-filesystem-0:104-2.el8.noarch",
            "CRB-8.4.0.GA:mingw64-sqlite-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw64-sqlite-debuginfo-0:3.26.0.0-1.el8.noarch",
            "CRB-8.4.0.GA:mingw64-sqlite-static-0:3.26.0.0-1.el8.noarch"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Moderate"
        }
      ],
      "title": "sqlite: NULL pointer dereference in ext/fts3/fts3_snippet.c via a crafted matchinfo() query"
    }
  ]
}

{
  "document": {
    "aggregate_severity": {
      "namespace": "https://access.redhat.com/security/updates/classification/",
      "text": "Moderate"
    },
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Copyright \u00a9 Red Hat, Inc. All rights reserved.",
      "tlp": {
        "label": "WHITE",
        "url": "https://www.first.org/tlp/"
      }
    },
    "lang": "en",
    "notes": [
      {
        "category": "summary",
        "text": "An update for sqlite is now available for Red Hat Enterprise Linux 8.\n\nRed Hat Product Security has rated this update as having a security impact of Moderate. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.",
        "title": "Topic"
      },
      {
        "category": "general",
        "text": "SQLite is a C library that implements an SQL database engine. A large subset of SQL92 is supported. A complete database is stored in a single disk file. The API is designed for convenience and ease of use. Applications that link against SQLite can enjoy the power and flexibility of an SQL database without the administrative hassles of supporting a separate database server.\n\nSecurity Fix(es):\n\n* sqlite: integer overflow in sqlite3_str_vappendf function in printf.c (CVE-2020-13434)\n\n* sqlite: heap-based buffer overflow in multiSelectOrderBy due to mishandling of query-flattener optimization in select.c (CVE-2020-15358)\n\nFor more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.\n\nAdditional Changes:\n\nFor detailed information on changes in this release, see the Red Hat Enterprise Linux 8.4 Release Notes linked from the References section.",
        "title": "Details"
      },
      {
        "category": "legal_disclaimer",
        "text": "This content is licensed under the Creative Commons Attribution 4.0 International License (https://creativecommons.org/licenses/by/4.0/). If you distribute this content, or a modified version of it, you must provide attribution to Red Hat Inc. and provide a link to the original.",
        "title": "Terms of Use"
      }
    ],
    "publisher": {
      "category": "vendor",
      "contact_details": "https://access.redhat.com/security/team/contact/",
      "issuing_authority": "Red Hat Product Security is responsible for vulnerability handling across all Red Hat products and services.",
      "name": "Red Hat Product Security",
      "namespace": "https://www.redhat.com"
    },
    "references": [
      {
        "category": "self",
        "summary": "https://access.redhat.com/errata/RHSA-2021:1581",
        "url": "https://access.redhat.com/errata/RHSA-2021:1581"
      },
      {
        "category": "external",
        "summary": "https://access.redhat.com/security/updates/classification/#moderate",
        "url": "https://access.redhat.com/security/updates/classification/#moderate"
      },
      {
        "category": "external",
        "summary": "https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/8/html/8.4_release_notes/",
        "url": "https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/8/html/8.4_release_notes/"
      },
      {
        "category": "external",
        "summary": "1785564",
        "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1785564"
      },
      {
        "category": "external",
        "summary": "1841223",
        "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1841223"
      },
      {
        "category": "external",
        "summary": "1851957",
        "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1851957"
      },
      {
        "category": "self",
        "summary": "Canonical URL",
        "url": "https://security.access.redhat.com/data/csaf/v2/advisories/2021/rhsa-2021_1581.json"
      }
    ],
    "title": "Red Hat Security Advisory: sqlite security update",
    "tracking": {
      "current_release_date": "2024-11-22T15:47:19+00:00",
      "generator": {
        "date": "2024-11-22T15:47:19+00:00",
        "engine": {
          "name": "Red Hat SDEngine",
          "version": "4.2.1"
        }
      },
      "id": "RHSA-2021:1581",
      "initial_release_date": "2021-05-18T13:34:10+00:00",
      "revision_history": [
        {
          "date": "2021-05-18T13:34:10+00:00",
          "number": "1",
          "summary": "Initial version"
        },
        {
          "date": "2021-05-18T13:34:10+00:00",
          "number": "2",
          "summary": "Last updated version"
        },
        {
          "date": "2024-11-22T15:47:19+00:00",
          "number": "3",
          "summary": "Last generated version"
        }
      ],
      "status": "final",
      "version": "3"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_name",
                "name": "Red Hat Enterprise Linux AppStream (v. 8)",
                "product": {
                  "name": "Red Hat Enterprise Linux AppStream (v. 8)",
                  "product_id": "AppStream-8.4.0.GA",
                  "product_identification_helper": {
                    "cpe": "cpe:/a:redhat:enterprise_linux:8::appstream"
                  }
                }
              },
              {
                "category": "product_name",
                "name": "Red Hat Enterprise Linux BaseOS (v. 8)",
                "product": {
                  "name": "Red Hat Enterprise Linux BaseOS (v. 8)",
                  "product_id": "BaseOS-8.4.0.GA",
                  "product_identification_helper": {
                    "cpe": "cpe:/o:redhat:enterprise_linux:8::baseos"
                  }
                }
              }
            ],
            "category": "product_family",
            "name": "Red Hat Enterprise Linux"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "lemon-0:3.26.0-13.el8.s390x",
                "product": {
                  "name": "lemon-0:3.26.0-13.el8.s390x",
                  "product_id": "lemon-0:3.26.0-13.el8.s390x",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/lemon@3.26.0-13.el8?arch=s390x"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "sqlite-debugsource-0:3.26.0-13.el8.s390x",
                "product": {
                  "name": "sqlite-debugsource-0:3.26.0-13.el8.s390x",
                  "product_id": "sqlite-debugsource-0:3.26.0-13.el8.s390x",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/sqlite-debugsource@3.26.0-13.el8?arch=s390x"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "lemon-debuginfo-0:3.26.0-13.el8.s390x",
                "product": {
                  "name": "lemon-debuginfo-0:3.26.0-13.el8.s390x",
                  "product_id": "lemon-debuginfo-0:3.26.0-13.el8.s390x",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/lemon-debuginfo@3.26.0-13.el8?arch=s390x"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "sqlite-analyzer-debuginfo-0:3.26.0-13.el8.s390x",
                "product": {
                  "name": "sqlite-analyzer-debuginfo-0:3.26.0-13.el8.s390x",
                  "product_id": "sqlite-analyzer-debuginfo-0:3.26.0-13.el8.s390x",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/sqlite-analyzer-debuginfo@3.26.0-13.el8?arch=s390x"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "sqlite-debuginfo-0:3.26.0-13.el8.s390x",
                "product": {
                  "name": "sqlite-debuginfo-0:3.26.0-13.el8.s390x",
                  "product_id": "sqlite-debuginfo-0:3.26.0-13.el8.s390x",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/sqlite-debuginfo@3.26.0-13.el8?arch=s390x"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "sqlite-libs-debuginfo-0:3.26.0-13.el8.s390x",
                "product": {
                  "name": "sqlite-libs-debuginfo-0:3.26.0-13.el8.s390x",
                  "product_id": "sqlite-libs-debuginfo-0:3.26.0-13.el8.s390x",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/sqlite-libs-debuginfo@3.26.0-13.el8?arch=s390x"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "sqlite-tcl-debuginfo-0:3.26.0-13.el8.s390x",
                "product": {
                  "name": "sqlite-tcl-debuginfo-0:3.26.0-13.el8.s390x",
                  "product_id": "sqlite-tcl-debuginfo-0:3.26.0-13.el8.s390x",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/sqlite-tcl-debuginfo@3.26.0-13.el8?arch=s390x"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "sqlite-0:3.26.0-13.el8.s390x",
                "product": {
                  "name": "sqlite-0:3.26.0-13.el8.s390x",
                  "product_id": "sqlite-0:3.26.0-13.el8.s390x",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/sqlite@3.26.0-13.el8?arch=s390x"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "sqlite-devel-0:3.26.0-13.el8.s390x",
                "product": {
                  "name": "sqlite-devel-0:3.26.0-13.el8.s390x",
                  "product_id": "sqlite-devel-0:3.26.0-13.el8.s390x",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/sqlite-devel@3.26.0-13.el8?arch=s390x"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "sqlite-libs-0:3.26.0-13.el8.s390x",
                "product": {
                  "name": "sqlite-libs-0:3.26.0-13.el8.s390x",
                  "product_id": "sqlite-libs-0:3.26.0-13.el8.s390x",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/sqlite-libs@3.26.0-13.el8?arch=s390x"
                  }
                }
              }
            ],
            "category": "architecture",
            "name": "s390x"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "lemon-0:3.26.0-13.el8.x86_64",
                "product": {
                  "name": "lemon-0:3.26.0-13.el8.x86_64",
                  "product_id": "lemon-0:3.26.0-13.el8.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/lemon@3.26.0-13.el8?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "sqlite-debugsource-0:3.26.0-13.el8.x86_64",
                "product": {
                  "name": "sqlite-debugsource-0:3.26.0-13.el8.x86_64",
                  "product_id": "sqlite-debugsource-0:3.26.0-13.el8.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/sqlite-debugsource@3.26.0-13.el8?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "lemon-debuginfo-0:3.26.0-13.el8.x86_64",
                "product": {
                  "name": "lemon-debuginfo-0:3.26.0-13.el8.x86_64",
                  "product_id": "lemon-debuginfo-0:3.26.0-13.el8.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/lemon-debuginfo@3.26.0-13.el8?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "sqlite-analyzer-debuginfo-0:3.26.0-13.el8.x86_64",
                "product": {
                  "name": "sqlite-analyzer-debuginfo-0:3.26.0-13.el8.x86_64",
                  "product_id": "sqlite-analyzer-debuginfo-0:3.26.0-13.el8.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/sqlite-analyzer-debuginfo@3.26.0-13.el8?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "sqlite-debuginfo-0:3.26.0-13.el8.x86_64",
                "product": {
                  "name": "sqlite-debuginfo-0:3.26.0-13.el8.x86_64",
                  "product_id": "sqlite-debuginfo-0:3.26.0-13.el8.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/sqlite-debuginfo@3.26.0-13.el8?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "sqlite-libs-debuginfo-0:3.26.0-13.el8.x86_64",
                "product": {
                  "name": "sqlite-libs-debuginfo-0:3.26.0-13.el8.x86_64",
                  "product_id": "sqlite-libs-debuginfo-0:3.26.0-13.el8.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/sqlite-libs-debuginfo@3.26.0-13.el8?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "sqlite-tcl-debuginfo-0:3.26.0-13.el8.x86_64",
                "product": {
                  "name": "sqlite-tcl-debuginfo-0:3.26.0-13.el8.x86_64",
                  "product_id": "sqlite-tcl-debuginfo-0:3.26.0-13.el8.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/sqlite-tcl-debuginfo@3.26.0-13.el8?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "sqlite-0:3.26.0-13.el8.x86_64",
                "product": {
                  "name": "sqlite-0:3.26.0-13.el8.x86_64",
                  "product_id": "sqlite-0:3.26.0-13.el8.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/sqlite@3.26.0-13.el8?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "sqlite-devel-0:3.26.0-13.el8.x86_64",
                "product": {
                  "name": "sqlite-devel-0:3.26.0-13.el8.x86_64",
                  "product_id": "sqlite-devel-0:3.26.0-13.el8.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/sqlite-devel@3.26.0-13.el8?arch=x86_64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "sqlite-libs-0:3.26.0-13.el8.x86_64",
                "product": {
                  "name": "sqlite-libs-0:3.26.0-13.el8.x86_64",
                  "product_id": "sqlite-libs-0:3.26.0-13.el8.x86_64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/sqlite-libs@3.26.0-13.el8?arch=x86_64"
                  }
                }
              }
            ],
            "category": "architecture",
            "name": "x86_64"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "lemon-0:3.26.0-13.el8.ppc64le",
                "product": {
                  "name": "lemon-0:3.26.0-13.el8.ppc64le",
                  "product_id": "lemon-0:3.26.0-13.el8.ppc64le",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/lemon@3.26.0-13.el8?arch=ppc64le"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "sqlite-debugsource-0:3.26.0-13.el8.ppc64le",
                "product": {
                  "name": "sqlite-debugsource-0:3.26.0-13.el8.ppc64le",
                  "product_id": "sqlite-debugsource-0:3.26.0-13.el8.ppc64le",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/sqlite-debugsource@3.26.0-13.el8?arch=ppc64le"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "lemon-debuginfo-0:3.26.0-13.el8.ppc64le",
                "product": {
                  "name": "lemon-debuginfo-0:3.26.0-13.el8.ppc64le",
                  "product_id": "lemon-debuginfo-0:3.26.0-13.el8.ppc64le",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/lemon-debuginfo@3.26.0-13.el8?arch=ppc64le"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "sqlite-analyzer-debuginfo-0:3.26.0-13.el8.ppc64le",
                "product": {
                  "name": "sqlite-analyzer-debuginfo-0:3.26.0-13.el8.ppc64le",
                  "product_id": "sqlite-analyzer-debuginfo-0:3.26.0-13.el8.ppc64le",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/sqlite-analyzer-debuginfo@3.26.0-13.el8?arch=ppc64le"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "sqlite-debuginfo-0:3.26.0-13.el8.ppc64le",
                "product": {
                  "name": "sqlite-debuginfo-0:3.26.0-13.el8.ppc64le",
                  "product_id": "sqlite-debuginfo-0:3.26.0-13.el8.ppc64le",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/sqlite-debuginfo@3.26.0-13.el8?arch=ppc64le"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "sqlite-libs-debuginfo-0:3.26.0-13.el8.ppc64le",
                "product": {
                  "name": "sqlite-libs-debuginfo-0:3.26.0-13.el8.ppc64le",
                  "product_id": "sqlite-libs-debuginfo-0:3.26.0-13.el8.ppc64le",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/sqlite-libs-debuginfo@3.26.0-13.el8?arch=ppc64le"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "sqlite-tcl-debuginfo-0:3.26.0-13.el8.ppc64le",
                "product": {
                  "name": "sqlite-tcl-debuginfo-0:3.26.0-13.el8.ppc64le",
                  "product_id": "sqlite-tcl-debuginfo-0:3.26.0-13.el8.ppc64le",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/sqlite-tcl-debuginfo@3.26.0-13.el8?arch=ppc64le"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "sqlite-0:3.26.0-13.el8.ppc64le",
                "product": {
                  "name": "sqlite-0:3.26.0-13.el8.ppc64le",
                  "product_id": "sqlite-0:3.26.0-13.el8.ppc64le",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/sqlite@3.26.0-13.el8?arch=ppc64le"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "sqlite-devel-0:3.26.0-13.el8.ppc64le",
                "product": {
                  "name": "sqlite-devel-0:3.26.0-13.el8.ppc64le",
                  "product_id": "sqlite-devel-0:3.26.0-13.el8.ppc64le",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/sqlite-devel@3.26.0-13.el8?arch=ppc64le"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "sqlite-libs-0:3.26.0-13.el8.ppc64le",
                "product": {
                  "name": "sqlite-libs-0:3.26.0-13.el8.ppc64le",
                  "product_id": "sqlite-libs-0:3.26.0-13.el8.ppc64le",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/sqlite-libs@3.26.0-13.el8?arch=ppc64le"
                  }
                }
              }
            ],
            "category": "architecture",
            "name": "ppc64le"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "lemon-0:3.26.0-13.el8.aarch64",
                "product": {
                  "name": "lemon-0:3.26.0-13.el8.aarch64",
                  "product_id": "lemon-0:3.26.0-13.el8.aarch64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/lemon@3.26.0-13.el8?arch=aarch64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "sqlite-debugsource-0:3.26.0-13.el8.aarch64",
                "product": {
                  "name": "sqlite-debugsource-0:3.26.0-13.el8.aarch64",
                  "product_id": "sqlite-debugsource-0:3.26.0-13.el8.aarch64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/sqlite-debugsource@3.26.0-13.el8?arch=aarch64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "lemon-debuginfo-0:3.26.0-13.el8.aarch64",
                "product": {
                  "name": "lemon-debuginfo-0:3.26.0-13.el8.aarch64",
                  "product_id": "lemon-debuginfo-0:3.26.0-13.el8.aarch64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/lemon-debuginfo@3.26.0-13.el8?arch=aarch64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "sqlite-analyzer-debuginfo-0:3.26.0-13.el8.aarch64",
                "product": {
                  "name": "sqlite-analyzer-debuginfo-0:3.26.0-13.el8.aarch64",
                  "product_id": "sqlite-analyzer-debuginfo-0:3.26.0-13.el8.aarch64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/sqlite-analyzer-debuginfo@3.26.0-13.el8?arch=aarch64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "sqlite-debuginfo-0:3.26.0-13.el8.aarch64",
                "product": {
                  "name": "sqlite-debuginfo-0:3.26.0-13.el8.aarch64",
                  "product_id": "sqlite-debuginfo-0:3.26.0-13.el8.aarch64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/sqlite-debuginfo@3.26.0-13.el8?arch=aarch64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "sqlite-libs-debuginfo-0:3.26.0-13.el8.aarch64",
                "product": {
                  "name": "sqlite-libs-debuginfo-0:3.26.0-13.el8.aarch64",
                  "product_id": "sqlite-libs-debuginfo-0:3.26.0-13.el8.aarch64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/sqlite-libs-debuginfo@3.26.0-13.el8?arch=aarch64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "sqlite-tcl-debuginfo-0:3.26.0-13.el8.aarch64",
                "product": {
                  "name": "sqlite-tcl-debuginfo-0:3.26.0-13.el8.aarch64",
                  "product_id": "sqlite-tcl-debuginfo-0:3.26.0-13.el8.aarch64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/sqlite-tcl-debuginfo@3.26.0-13.el8?arch=aarch64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "sqlite-0:3.26.0-13.el8.aarch64",
                "product": {
                  "name": "sqlite-0:3.26.0-13.el8.aarch64",
                  "product_id": "sqlite-0:3.26.0-13.el8.aarch64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/sqlite@3.26.0-13.el8?arch=aarch64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "sqlite-devel-0:3.26.0-13.el8.aarch64",
                "product": {
                  "name": "sqlite-devel-0:3.26.0-13.el8.aarch64",
                  "product_id": "sqlite-devel-0:3.26.0-13.el8.aarch64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/sqlite-devel@3.26.0-13.el8?arch=aarch64"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "sqlite-libs-0:3.26.0-13.el8.aarch64",
                "product": {
                  "name": "sqlite-libs-0:3.26.0-13.el8.aarch64",
                  "product_id": "sqlite-libs-0:3.26.0-13.el8.aarch64",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/sqlite-libs@3.26.0-13.el8?arch=aarch64"
                  }
                }
              }
            ],
            "category": "architecture",
            "name": "aarch64"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "sqlite-0:3.26.0-13.el8.i686",
                "product": {
                  "name": "sqlite-0:3.26.0-13.el8.i686",
                  "product_id": "sqlite-0:3.26.0-13.el8.i686",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/sqlite@3.26.0-13.el8?arch=i686"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "sqlite-devel-0:3.26.0-13.el8.i686",
                "product": {
                  "name": "sqlite-devel-0:3.26.0-13.el8.i686",
                  "product_id": "sqlite-devel-0:3.26.0-13.el8.i686",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/sqlite-devel@3.26.0-13.el8?arch=i686"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "sqlite-libs-0:3.26.0-13.el8.i686",
                "product": {
                  "name": "sqlite-libs-0:3.26.0-13.el8.i686",
                  "product_id": "sqlite-libs-0:3.26.0-13.el8.i686",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/sqlite-libs@3.26.0-13.el8?arch=i686"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "sqlite-debugsource-0:3.26.0-13.el8.i686",
                "product": {
                  "name": "sqlite-debugsource-0:3.26.0-13.el8.i686",
                  "product_id": "sqlite-debugsource-0:3.26.0-13.el8.i686",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/sqlite-debugsource@3.26.0-13.el8?arch=i686"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "lemon-debuginfo-0:3.26.0-13.el8.i686",
                "product": {
                  "name": "lemon-debuginfo-0:3.26.0-13.el8.i686",
                  "product_id": "lemon-debuginfo-0:3.26.0-13.el8.i686",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/lemon-debuginfo@3.26.0-13.el8?arch=i686"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "sqlite-analyzer-debuginfo-0:3.26.0-13.el8.i686",
                "product": {
                  "name": "sqlite-analyzer-debuginfo-0:3.26.0-13.el8.i686",
                  "product_id": "sqlite-analyzer-debuginfo-0:3.26.0-13.el8.i686",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/sqlite-analyzer-debuginfo@3.26.0-13.el8?arch=i686"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "sqlite-debuginfo-0:3.26.0-13.el8.i686",
                "product": {
                  "name": "sqlite-debuginfo-0:3.26.0-13.el8.i686",
                  "product_id": "sqlite-debuginfo-0:3.26.0-13.el8.i686",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/sqlite-debuginfo@3.26.0-13.el8?arch=i686"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "sqlite-libs-debuginfo-0:3.26.0-13.el8.i686",
                "product": {
                  "name": "sqlite-libs-debuginfo-0:3.26.0-13.el8.i686",
                  "product_id": "sqlite-libs-debuginfo-0:3.26.0-13.el8.i686",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/sqlite-libs-debuginfo@3.26.0-13.el8?arch=i686"
                  }
                }
              },
              {
                "category": "product_version",
                "name": "sqlite-tcl-debuginfo-0:3.26.0-13.el8.i686",
                "product": {
                  "name": "sqlite-tcl-debuginfo-0:3.26.0-13.el8.i686",
                  "product_id": "sqlite-tcl-debuginfo-0:3.26.0-13.el8.i686",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/sqlite-tcl-debuginfo@3.26.0-13.el8?arch=i686"
                  }
                }
              }
            ],
            "category": "architecture",
            "name": "i686"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "sqlite-0:3.26.0-13.el8.src",
                "product": {
                  "name": "sqlite-0:3.26.0-13.el8.src",
                  "product_id": "sqlite-0:3.26.0-13.el8.src",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/sqlite@3.26.0-13.el8?arch=src"
                  }
                }
              }
            ],
            "category": "architecture",
            "name": "src"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "sqlite-doc-0:3.26.0-13.el8.noarch",
                "product": {
                  "name": "sqlite-doc-0:3.26.0-13.el8.noarch",
                  "product_id": "sqlite-doc-0:3.26.0-13.el8.noarch",
                  "product_identification_helper": {
                    "purl": "pkg:rpm/redhat/sqlite-doc@3.26.0-13.el8?arch=noarch"
                  }
                }
              }
            ],
            "category": "architecture",
            "name": "noarch"
          }
        ],
        "category": "vendor",
        "name": "Red Hat"
      }
    ],
    "relationships": [
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "lemon-0:3.26.0-13.el8.aarch64 as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.4.0.GA:lemon-0:3.26.0-13.el8.aarch64"
        },
        "product_reference": "lemon-0:3.26.0-13.el8.aarch64",
        "relates_to_product_reference": "AppStream-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "lemon-0:3.26.0-13.el8.ppc64le as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.4.0.GA:lemon-0:3.26.0-13.el8.ppc64le"
        },
        "product_reference": "lemon-0:3.26.0-13.el8.ppc64le",
        "relates_to_product_reference": "AppStream-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "lemon-0:3.26.0-13.el8.s390x as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.4.0.GA:lemon-0:3.26.0-13.el8.s390x"
        },
        "product_reference": "lemon-0:3.26.0-13.el8.s390x",
        "relates_to_product_reference": "AppStream-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "lemon-0:3.26.0-13.el8.x86_64 as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.4.0.GA:lemon-0:3.26.0-13.el8.x86_64"
        },
        "product_reference": "lemon-0:3.26.0-13.el8.x86_64",
        "relates_to_product_reference": "AppStream-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "lemon-debuginfo-0:3.26.0-13.el8.aarch64 as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.aarch64"
        },
        "product_reference": "lemon-debuginfo-0:3.26.0-13.el8.aarch64",
        "relates_to_product_reference": "AppStream-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "lemon-debuginfo-0:3.26.0-13.el8.i686 as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.i686"
        },
        "product_reference": "lemon-debuginfo-0:3.26.0-13.el8.i686",
        "relates_to_product_reference": "AppStream-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "lemon-debuginfo-0:3.26.0-13.el8.ppc64le as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.ppc64le"
        },
        "product_reference": "lemon-debuginfo-0:3.26.0-13.el8.ppc64le",
        "relates_to_product_reference": "AppStream-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "lemon-debuginfo-0:3.26.0-13.el8.s390x as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.s390x"
        },
        "product_reference": "lemon-debuginfo-0:3.26.0-13.el8.s390x",
        "relates_to_product_reference": "AppStream-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "lemon-debuginfo-0:3.26.0-13.el8.x86_64 as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.x86_64"
        },
        "product_reference": "lemon-debuginfo-0:3.26.0-13.el8.x86_64",
        "relates_to_product_reference": "AppStream-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-0:3.26.0-13.el8.aarch64 as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.4.0.GA:sqlite-0:3.26.0-13.el8.aarch64"
        },
        "product_reference": "sqlite-0:3.26.0-13.el8.aarch64",
        "relates_to_product_reference": "AppStream-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-0:3.26.0-13.el8.i686 as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.4.0.GA:sqlite-0:3.26.0-13.el8.i686"
        },
        "product_reference": "sqlite-0:3.26.0-13.el8.i686",
        "relates_to_product_reference": "AppStream-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-0:3.26.0-13.el8.ppc64le as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.4.0.GA:sqlite-0:3.26.0-13.el8.ppc64le"
        },
        "product_reference": "sqlite-0:3.26.0-13.el8.ppc64le",
        "relates_to_product_reference": "AppStream-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-0:3.26.0-13.el8.s390x as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.4.0.GA:sqlite-0:3.26.0-13.el8.s390x"
        },
        "product_reference": "sqlite-0:3.26.0-13.el8.s390x",
        "relates_to_product_reference": "AppStream-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-0:3.26.0-13.el8.src as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.4.0.GA:sqlite-0:3.26.0-13.el8.src"
        },
        "product_reference": "sqlite-0:3.26.0-13.el8.src",
        "relates_to_product_reference": "AppStream-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-0:3.26.0-13.el8.x86_64 as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.4.0.GA:sqlite-0:3.26.0-13.el8.x86_64"
        },
        "product_reference": "sqlite-0:3.26.0-13.el8.x86_64",
        "relates_to_product_reference": "AppStream-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-analyzer-debuginfo-0:3.26.0-13.el8.aarch64 as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.aarch64"
        },
        "product_reference": "sqlite-analyzer-debuginfo-0:3.26.0-13.el8.aarch64",
        "relates_to_product_reference": "AppStream-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-analyzer-debuginfo-0:3.26.0-13.el8.i686 as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.i686"
        },
        "product_reference": "sqlite-analyzer-debuginfo-0:3.26.0-13.el8.i686",
        "relates_to_product_reference": "AppStream-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-analyzer-debuginfo-0:3.26.0-13.el8.ppc64le as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.ppc64le"
        },
        "product_reference": "sqlite-analyzer-debuginfo-0:3.26.0-13.el8.ppc64le",
        "relates_to_product_reference": "AppStream-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-analyzer-debuginfo-0:3.26.0-13.el8.s390x as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.s390x"
        },
        "product_reference": "sqlite-analyzer-debuginfo-0:3.26.0-13.el8.s390x",
        "relates_to_product_reference": "AppStream-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-analyzer-debuginfo-0:3.26.0-13.el8.x86_64 as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.x86_64"
        },
        "product_reference": "sqlite-analyzer-debuginfo-0:3.26.0-13.el8.x86_64",
        "relates_to_product_reference": "AppStream-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-debuginfo-0:3.26.0-13.el8.aarch64 as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.aarch64"
        },
        "product_reference": "sqlite-debuginfo-0:3.26.0-13.el8.aarch64",
        "relates_to_product_reference": "AppStream-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-debuginfo-0:3.26.0-13.el8.i686 as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.i686"
        },
        "product_reference": "sqlite-debuginfo-0:3.26.0-13.el8.i686",
        "relates_to_product_reference": "AppStream-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-debuginfo-0:3.26.0-13.el8.ppc64le as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.ppc64le"
        },
        "product_reference": "sqlite-debuginfo-0:3.26.0-13.el8.ppc64le",
        "relates_to_product_reference": "AppStream-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-debuginfo-0:3.26.0-13.el8.s390x as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.s390x"
        },
        "product_reference": "sqlite-debuginfo-0:3.26.0-13.el8.s390x",
        "relates_to_product_reference": "AppStream-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-debuginfo-0:3.26.0-13.el8.x86_64 as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.x86_64"
        },
        "product_reference": "sqlite-debuginfo-0:3.26.0-13.el8.x86_64",
        "relates_to_product_reference": "AppStream-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-debugsource-0:3.26.0-13.el8.aarch64 as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.aarch64"
        },
        "product_reference": "sqlite-debugsource-0:3.26.0-13.el8.aarch64",
        "relates_to_product_reference": "AppStream-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-debugsource-0:3.26.0-13.el8.i686 as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.i686"
        },
        "product_reference": "sqlite-debugsource-0:3.26.0-13.el8.i686",
        "relates_to_product_reference": "AppStream-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-debugsource-0:3.26.0-13.el8.ppc64le as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.ppc64le"
        },
        "product_reference": "sqlite-debugsource-0:3.26.0-13.el8.ppc64le",
        "relates_to_product_reference": "AppStream-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-debugsource-0:3.26.0-13.el8.s390x as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.s390x"
        },
        "product_reference": "sqlite-debugsource-0:3.26.0-13.el8.s390x",
        "relates_to_product_reference": "AppStream-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-debugsource-0:3.26.0-13.el8.x86_64 as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.x86_64"
        },
        "product_reference": "sqlite-debugsource-0:3.26.0-13.el8.x86_64",
        "relates_to_product_reference": "AppStream-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-devel-0:3.26.0-13.el8.aarch64 as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.aarch64"
        },
        "product_reference": "sqlite-devel-0:3.26.0-13.el8.aarch64",
        "relates_to_product_reference": "AppStream-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-devel-0:3.26.0-13.el8.i686 as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.i686"
        },
        "product_reference": "sqlite-devel-0:3.26.0-13.el8.i686",
        "relates_to_product_reference": "AppStream-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-devel-0:3.26.0-13.el8.ppc64le as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.ppc64le"
        },
        "product_reference": "sqlite-devel-0:3.26.0-13.el8.ppc64le",
        "relates_to_product_reference": "AppStream-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-devel-0:3.26.0-13.el8.s390x as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.s390x"
        },
        "product_reference": "sqlite-devel-0:3.26.0-13.el8.s390x",
        "relates_to_product_reference": "AppStream-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-devel-0:3.26.0-13.el8.x86_64 as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.x86_64"
        },
        "product_reference": "sqlite-devel-0:3.26.0-13.el8.x86_64",
        "relates_to_product_reference": "AppStream-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-doc-0:3.26.0-13.el8.noarch as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.4.0.GA:sqlite-doc-0:3.26.0-13.el8.noarch"
        },
        "product_reference": "sqlite-doc-0:3.26.0-13.el8.noarch",
        "relates_to_product_reference": "AppStream-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-libs-0:3.26.0-13.el8.aarch64 as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.aarch64"
        },
        "product_reference": "sqlite-libs-0:3.26.0-13.el8.aarch64",
        "relates_to_product_reference": "AppStream-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-libs-0:3.26.0-13.el8.i686 as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.i686"
        },
        "product_reference": "sqlite-libs-0:3.26.0-13.el8.i686",
        "relates_to_product_reference": "AppStream-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-libs-0:3.26.0-13.el8.ppc64le as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.ppc64le"
        },
        "product_reference": "sqlite-libs-0:3.26.0-13.el8.ppc64le",
        "relates_to_product_reference": "AppStream-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-libs-0:3.26.0-13.el8.s390x as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.s390x"
        },
        "product_reference": "sqlite-libs-0:3.26.0-13.el8.s390x",
        "relates_to_product_reference": "AppStream-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-libs-0:3.26.0-13.el8.x86_64 as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.x86_64"
        },
        "product_reference": "sqlite-libs-0:3.26.0-13.el8.x86_64",
        "relates_to_product_reference": "AppStream-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-libs-debuginfo-0:3.26.0-13.el8.aarch64 as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.aarch64"
        },
        "product_reference": "sqlite-libs-debuginfo-0:3.26.0-13.el8.aarch64",
        "relates_to_product_reference": "AppStream-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-libs-debuginfo-0:3.26.0-13.el8.i686 as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.i686"
        },
        "product_reference": "sqlite-libs-debuginfo-0:3.26.0-13.el8.i686",
        "relates_to_product_reference": "AppStream-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-libs-debuginfo-0:3.26.0-13.el8.ppc64le as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.ppc64le"
        },
        "product_reference": "sqlite-libs-debuginfo-0:3.26.0-13.el8.ppc64le",
        "relates_to_product_reference": "AppStream-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-libs-debuginfo-0:3.26.0-13.el8.s390x as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.s390x"
        },
        "product_reference": "sqlite-libs-debuginfo-0:3.26.0-13.el8.s390x",
        "relates_to_product_reference": "AppStream-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-libs-debuginfo-0:3.26.0-13.el8.x86_64 as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.x86_64"
        },
        "product_reference": "sqlite-libs-debuginfo-0:3.26.0-13.el8.x86_64",
        "relates_to_product_reference": "AppStream-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-tcl-debuginfo-0:3.26.0-13.el8.aarch64 as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.aarch64"
        },
        "product_reference": "sqlite-tcl-debuginfo-0:3.26.0-13.el8.aarch64",
        "relates_to_product_reference": "AppStream-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-tcl-debuginfo-0:3.26.0-13.el8.i686 as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.i686"
        },
        "product_reference": "sqlite-tcl-debuginfo-0:3.26.0-13.el8.i686",
        "relates_to_product_reference": "AppStream-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-tcl-debuginfo-0:3.26.0-13.el8.ppc64le as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.ppc64le"
        },
        "product_reference": "sqlite-tcl-debuginfo-0:3.26.0-13.el8.ppc64le",
        "relates_to_product_reference": "AppStream-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-tcl-debuginfo-0:3.26.0-13.el8.s390x as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.s390x"
        },
        "product_reference": "sqlite-tcl-debuginfo-0:3.26.0-13.el8.s390x",
        "relates_to_product_reference": "AppStream-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-tcl-debuginfo-0:3.26.0-13.el8.x86_64 as a component of Red Hat Enterprise Linux AppStream (v. 8)",
          "product_id": "AppStream-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.x86_64"
        },
        "product_reference": "sqlite-tcl-debuginfo-0:3.26.0-13.el8.x86_64",
        "relates_to_product_reference": "AppStream-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "lemon-0:3.26.0-13.el8.aarch64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.4.0.GA:lemon-0:3.26.0-13.el8.aarch64"
        },
        "product_reference": "lemon-0:3.26.0-13.el8.aarch64",
        "relates_to_product_reference": "BaseOS-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "lemon-0:3.26.0-13.el8.ppc64le as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.4.0.GA:lemon-0:3.26.0-13.el8.ppc64le"
        },
        "product_reference": "lemon-0:3.26.0-13.el8.ppc64le",
        "relates_to_product_reference": "BaseOS-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "lemon-0:3.26.0-13.el8.s390x as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.4.0.GA:lemon-0:3.26.0-13.el8.s390x"
        },
        "product_reference": "lemon-0:3.26.0-13.el8.s390x",
        "relates_to_product_reference": "BaseOS-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "lemon-0:3.26.0-13.el8.x86_64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.4.0.GA:lemon-0:3.26.0-13.el8.x86_64"
        },
        "product_reference": "lemon-0:3.26.0-13.el8.x86_64",
        "relates_to_product_reference": "BaseOS-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "lemon-debuginfo-0:3.26.0-13.el8.aarch64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.aarch64"
        },
        "product_reference": "lemon-debuginfo-0:3.26.0-13.el8.aarch64",
        "relates_to_product_reference": "BaseOS-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "lemon-debuginfo-0:3.26.0-13.el8.i686 as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.i686"
        },
        "product_reference": "lemon-debuginfo-0:3.26.0-13.el8.i686",
        "relates_to_product_reference": "BaseOS-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "lemon-debuginfo-0:3.26.0-13.el8.ppc64le as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.ppc64le"
        },
        "product_reference": "lemon-debuginfo-0:3.26.0-13.el8.ppc64le",
        "relates_to_product_reference": "BaseOS-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "lemon-debuginfo-0:3.26.0-13.el8.s390x as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.s390x"
        },
        "product_reference": "lemon-debuginfo-0:3.26.0-13.el8.s390x",
        "relates_to_product_reference": "BaseOS-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "lemon-debuginfo-0:3.26.0-13.el8.x86_64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.x86_64"
        },
        "product_reference": "lemon-debuginfo-0:3.26.0-13.el8.x86_64",
        "relates_to_product_reference": "BaseOS-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-0:3.26.0-13.el8.aarch64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.4.0.GA:sqlite-0:3.26.0-13.el8.aarch64"
        },
        "product_reference": "sqlite-0:3.26.0-13.el8.aarch64",
        "relates_to_product_reference": "BaseOS-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-0:3.26.0-13.el8.i686 as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.4.0.GA:sqlite-0:3.26.0-13.el8.i686"
        },
        "product_reference": "sqlite-0:3.26.0-13.el8.i686",
        "relates_to_product_reference": "BaseOS-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-0:3.26.0-13.el8.ppc64le as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.4.0.GA:sqlite-0:3.26.0-13.el8.ppc64le"
        },
        "product_reference": "sqlite-0:3.26.0-13.el8.ppc64le",
        "relates_to_product_reference": "BaseOS-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-0:3.26.0-13.el8.s390x as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.4.0.GA:sqlite-0:3.26.0-13.el8.s390x"
        },
        "product_reference": "sqlite-0:3.26.0-13.el8.s390x",
        "relates_to_product_reference": "BaseOS-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-0:3.26.0-13.el8.src as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.4.0.GA:sqlite-0:3.26.0-13.el8.src"
        },
        "product_reference": "sqlite-0:3.26.0-13.el8.src",
        "relates_to_product_reference": "BaseOS-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-0:3.26.0-13.el8.x86_64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.4.0.GA:sqlite-0:3.26.0-13.el8.x86_64"
        },
        "product_reference": "sqlite-0:3.26.0-13.el8.x86_64",
        "relates_to_product_reference": "BaseOS-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-analyzer-debuginfo-0:3.26.0-13.el8.aarch64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.aarch64"
        },
        "product_reference": "sqlite-analyzer-debuginfo-0:3.26.0-13.el8.aarch64",
        "relates_to_product_reference": "BaseOS-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-analyzer-debuginfo-0:3.26.0-13.el8.i686 as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.i686"
        },
        "product_reference": "sqlite-analyzer-debuginfo-0:3.26.0-13.el8.i686",
        "relates_to_product_reference": "BaseOS-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-analyzer-debuginfo-0:3.26.0-13.el8.ppc64le as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.ppc64le"
        },
        "product_reference": "sqlite-analyzer-debuginfo-0:3.26.0-13.el8.ppc64le",
        "relates_to_product_reference": "BaseOS-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-analyzer-debuginfo-0:3.26.0-13.el8.s390x as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.s390x"
        },
        "product_reference": "sqlite-analyzer-debuginfo-0:3.26.0-13.el8.s390x",
        "relates_to_product_reference": "BaseOS-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-analyzer-debuginfo-0:3.26.0-13.el8.x86_64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.x86_64"
        },
        "product_reference": "sqlite-analyzer-debuginfo-0:3.26.0-13.el8.x86_64",
        "relates_to_product_reference": "BaseOS-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-debuginfo-0:3.26.0-13.el8.aarch64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.aarch64"
        },
        "product_reference": "sqlite-debuginfo-0:3.26.0-13.el8.aarch64",
        "relates_to_product_reference": "BaseOS-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-debuginfo-0:3.26.0-13.el8.i686 as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.i686"
        },
        "product_reference": "sqlite-debuginfo-0:3.26.0-13.el8.i686",
        "relates_to_product_reference": "BaseOS-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-debuginfo-0:3.26.0-13.el8.ppc64le as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.ppc64le"
        },
        "product_reference": "sqlite-debuginfo-0:3.26.0-13.el8.ppc64le",
        "relates_to_product_reference": "BaseOS-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-debuginfo-0:3.26.0-13.el8.s390x as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.s390x"
        },
        "product_reference": "sqlite-debuginfo-0:3.26.0-13.el8.s390x",
        "relates_to_product_reference": "BaseOS-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-debuginfo-0:3.26.0-13.el8.x86_64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.x86_64"
        },
        "product_reference": "sqlite-debuginfo-0:3.26.0-13.el8.x86_64",
        "relates_to_product_reference": "BaseOS-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-debugsource-0:3.26.0-13.el8.aarch64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.aarch64"
        },
        "product_reference": "sqlite-debugsource-0:3.26.0-13.el8.aarch64",
        "relates_to_product_reference": "BaseOS-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-debugsource-0:3.26.0-13.el8.i686 as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.i686"
        },
        "product_reference": "sqlite-debugsource-0:3.26.0-13.el8.i686",
        "relates_to_product_reference": "BaseOS-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-debugsource-0:3.26.0-13.el8.ppc64le as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.ppc64le"
        },
        "product_reference": "sqlite-debugsource-0:3.26.0-13.el8.ppc64le",
        "relates_to_product_reference": "BaseOS-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-debugsource-0:3.26.0-13.el8.s390x as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.s390x"
        },
        "product_reference": "sqlite-debugsource-0:3.26.0-13.el8.s390x",
        "relates_to_product_reference": "BaseOS-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-debugsource-0:3.26.0-13.el8.x86_64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.x86_64"
        },
        "product_reference": "sqlite-debugsource-0:3.26.0-13.el8.x86_64",
        "relates_to_product_reference": "BaseOS-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-devel-0:3.26.0-13.el8.aarch64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.aarch64"
        },
        "product_reference": "sqlite-devel-0:3.26.0-13.el8.aarch64",
        "relates_to_product_reference": "BaseOS-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-devel-0:3.26.0-13.el8.i686 as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.i686"
        },
        "product_reference": "sqlite-devel-0:3.26.0-13.el8.i686",
        "relates_to_product_reference": "BaseOS-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-devel-0:3.26.0-13.el8.ppc64le as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.ppc64le"
        },
        "product_reference": "sqlite-devel-0:3.26.0-13.el8.ppc64le",
        "relates_to_product_reference": "BaseOS-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-devel-0:3.26.0-13.el8.s390x as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.s390x"
        },
        "product_reference": "sqlite-devel-0:3.26.0-13.el8.s390x",
        "relates_to_product_reference": "BaseOS-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-devel-0:3.26.0-13.el8.x86_64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.x86_64"
        },
        "product_reference": "sqlite-devel-0:3.26.0-13.el8.x86_64",
        "relates_to_product_reference": "BaseOS-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-doc-0:3.26.0-13.el8.noarch as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.4.0.GA:sqlite-doc-0:3.26.0-13.el8.noarch"
        },
        "product_reference": "sqlite-doc-0:3.26.0-13.el8.noarch",
        "relates_to_product_reference": "BaseOS-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-libs-0:3.26.0-13.el8.aarch64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.aarch64"
        },
        "product_reference": "sqlite-libs-0:3.26.0-13.el8.aarch64",
        "relates_to_product_reference": "BaseOS-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-libs-0:3.26.0-13.el8.i686 as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.i686"
        },
        "product_reference": "sqlite-libs-0:3.26.0-13.el8.i686",
        "relates_to_product_reference": "BaseOS-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-libs-0:3.26.0-13.el8.ppc64le as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.ppc64le"
        },
        "product_reference": "sqlite-libs-0:3.26.0-13.el8.ppc64le",
        "relates_to_product_reference": "BaseOS-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-libs-0:3.26.0-13.el8.s390x as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.s390x"
        },
        "product_reference": "sqlite-libs-0:3.26.0-13.el8.s390x",
        "relates_to_product_reference": "BaseOS-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-libs-0:3.26.0-13.el8.x86_64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.x86_64"
        },
        "product_reference": "sqlite-libs-0:3.26.0-13.el8.x86_64",
        "relates_to_product_reference": "BaseOS-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-libs-debuginfo-0:3.26.0-13.el8.aarch64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.aarch64"
        },
        "product_reference": "sqlite-libs-debuginfo-0:3.26.0-13.el8.aarch64",
        "relates_to_product_reference": "BaseOS-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-libs-debuginfo-0:3.26.0-13.el8.i686 as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.i686"
        },
        "product_reference": "sqlite-libs-debuginfo-0:3.26.0-13.el8.i686",
        "relates_to_product_reference": "BaseOS-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-libs-debuginfo-0:3.26.0-13.el8.ppc64le as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.ppc64le"
        },
        "product_reference": "sqlite-libs-debuginfo-0:3.26.0-13.el8.ppc64le",
        "relates_to_product_reference": "BaseOS-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-libs-debuginfo-0:3.26.0-13.el8.s390x as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.s390x"
        },
        "product_reference": "sqlite-libs-debuginfo-0:3.26.0-13.el8.s390x",
        "relates_to_product_reference": "BaseOS-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-libs-debuginfo-0:3.26.0-13.el8.x86_64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.x86_64"
        },
        "product_reference": "sqlite-libs-debuginfo-0:3.26.0-13.el8.x86_64",
        "relates_to_product_reference": "BaseOS-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-tcl-debuginfo-0:3.26.0-13.el8.aarch64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.aarch64"
        },
        "product_reference": "sqlite-tcl-debuginfo-0:3.26.0-13.el8.aarch64",
        "relates_to_product_reference": "BaseOS-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-tcl-debuginfo-0:3.26.0-13.el8.i686 as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.i686"
        },
        "product_reference": "sqlite-tcl-debuginfo-0:3.26.0-13.el8.i686",
        "relates_to_product_reference": "BaseOS-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-tcl-debuginfo-0:3.26.0-13.el8.ppc64le as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.ppc64le"
        },
        "product_reference": "sqlite-tcl-debuginfo-0:3.26.0-13.el8.ppc64le",
        "relates_to_product_reference": "BaseOS-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-tcl-debuginfo-0:3.26.0-13.el8.s390x as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.s390x"
        },
        "product_reference": "sqlite-tcl-debuginfo-0:3.26.0-13.el8.s390x",
        "relates_to_product_reference": "BaseOS-8.4.0.GA"
      },
      {
        "category": "default_component_of",
        "full_product_name": {
          "name": "sqlite-tcl-debuginfo-0:3.26.0-13.el8.x86_64 as a component of Red Hat Enterprise Linux BaseOS (v. 8)",
          "product_id": "BaseOS-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.x86_64"
        },
        "product_reference": "sqlite-tcl-debuginfo-0:3.26.0-13.el8.x86_64",
        "relates_to_product_reference": "BaseOS-8.4.0.GA"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2020-13434",
      "cwe": {
        "id": "CWE-121",
        "name": "Stack-based Buffer Overflow"
      },
      "discovery_date": "2020-05-24T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1841223"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "An integer overflow flaw was found in the SQLite implementation of the printf() function. This flaw allows an attacker who can control the precision of floating-point conversions, to crash the application, resulting in a denial of service.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "sqlite: integer overflow in sqlite3_str_vappendf function in printf.c",
          "title": "Vulnerability summary"
        },
        {
          "category": "other",
          "text": "This flaw did not affect the versions of SQLite as shipped with Red Hat Enterprise Linux 7 as they did not include support for the printf() function, which was introduced in a later version of the package.",
          "title": "Statement"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "AppStream-8.4.0.GA:lemon-0:3.26.0-13.el8.aarch64",
          "AppStream-8.4.0.GA:lemon-0:3.26.0-13.el8.ppc64le",
          "AppStream-8.4.0.GA:lemon-0:3.26.0-13.el8.s390x",
          "AppStream-8.4.0.GA:lemon-0:3.26.0-13.el8.x86_64",
          "AppStream-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.aarch64",
          "AppStream-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.i686",
          "AppStream-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.ppc64le",
          "AppStream-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.s390x",
          "AppStream-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.x86_64",
          "AppStream-8.4.0.GA:sqlite-0:3.26.0-13.el8.aarch64",
          "AppStream-8.4.0.GA:sqlite-0:3.26.0-13.el8.i686",
          "AppStream-8.4.0.GA:sqlite-0:3.26.0-13.el8.ppc64le",
          "AppStream-8.4.0.GA:sqlite-0:3.26.0-13.el8.s390x",
          "AppStream-8.4.0.GA:sqlite-0:3.26.0-13.el8.src",
          "AppStream-8.4.0.GA:sqlite-0:3.26.0-13.el8.x86_64",
          "AppStream-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.aarch64",
          "AppStream-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.i686",
          "AppStream-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.ppc64le",
          "AppStream-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.s390x",
          "AppStream-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.x86_64",
          "AppStream-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.aarch64",
          "AppStream-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.i686",
          "AppStream-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.ppc64le",
          "AppStream-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.s390x",
          "AppStream-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.x86_64",
          "AppStream-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.aarch64",
          "AppStream-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.i686",
          "AppStream-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.ppc64le",
          "AppStream-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.s390x",
          "AppStream-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.x86_64",
          "AppStream-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.aarch64",
          "AppStream-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.i686",
          "AppStream-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.ppc64le",
          "AppStream-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.s390x",
          "AppStream-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.x86_64",
          "AppStream-8.4.0.GA:sqlite-doc-0:3.26.0-13.el8.noarch",
          "AppStream-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.aarch64",
          "AppStream-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.i686",
          "AppStream-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.ppc64le",
          "AppStream-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.s390x",
          "AppStream-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.x86_64",
          "AppStream-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.aarch64",
          "AppStream-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.i686",
          "AppStream-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.ppc64le",
          "AppStream-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.s390x",
          "AppStream-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.x86_64",
          "AppStream-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.aarch64",
          "AppStream-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.i686",
          "AppStream-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.ppc64le",
          "AppStream-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.s390x",
          "AppStream-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.x86_64",
          "BaseOS-8.4.0.GA:lemon-0:3.26.0-13.el8.aarch64",
          "BaseOS-8.4.0.GA:lemon-0:3.26.0-13.el8.ppc64le",
          "BaseOS-8.4.0.GA:lemon-0:3.26.0-13.el8.s390x",
          "BaseOS-8.4.0.GA:lemon-0:3.26.0-13.el8.x86_64",
          "BaseOS-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.aarch64",
          "BaseOS-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.i686",
          "BaseOS-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.ppc64le",
          "BaseOS-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.s390x",
          "BaseOS-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.x86_64",
          "BaseOS-8.4.0.GA:sqlite-0:3.26.0-13.el8.aarch64",
          "BaseOS-8.4.0.GA:sqlite-0:3.26.0-13.el8.i686",
          "BaseOS-8.4.0.GA:sqlite-0:3.26.0-13.el8.ppc64le",
          "BaseOS-8.4.0.GA:sqlite-0:3.26.0-13.el8.s390x",
          "BaseOS-8.4.0.GA:sqlite-0:3.26.0-13.el8.src",
          "BaseOS-8.4.0.GA:sqlite-0:3.26.0-13.el8.x86_64",
          "BaseOS-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.aarch64",
          "BaseOS-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.i686",
          "BaseOS-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.ppc64le",
          "BaseOS-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.s390x",
          "BaseOS-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.x86_64",
          "BaseOS-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.aarch64",
          "BaseOS-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.i686",
          "BaseOS-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.ppc64le",
          "BaseOS-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.s390x",
          "BaseOS-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.x86_64",
          "BaseOS-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.aarch64",
          "BaseOS-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.i686",
          "BaseOS-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.ppc64le",
          "BaseOS-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.s390x",
          "BaseOS-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.x86_64",
          "BaseOS-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.aarch64",
          "BaseOS-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.i686",
          "BaseOS-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.ppc64le",
          "BaseOS-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.s390x",
          "BaseOS-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.x86_64",
          "BaseOS-8.4.0.GA:sqlite-doc-0:3.26.0-13.el8.noarch",
          "BaseOS-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.aarch64",
          "BaseOS-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.i686",
          "BaseOS-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.ppc64le",
          "BaseOS-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.s390x",
          "BaseOS-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.x86_64",
          "BaseOS-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.aarch64",
          "BaseOS-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.i686",
          "BaseOS-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.ppc64le",
          "BaseOS-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.s390x",
          "BaseOS-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.x86_64",
          "BaseOS-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.aarch64",
          "BaseOS-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.i686",
          "BaseOS-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.ppc64le",
          "BaseOS-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.s390x",
          "BaseOS-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.x86_64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2020-13434"
        },
        {
          "category": "external",
          "summary": "RHBZ#1841223",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1841223"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2020-13434",
          "url": "https://www.cve.org/CVERecord?id=CVE-2020-13434"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2020-13434",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2020-13434"
        }
      ],
      "release_date": "2020-05-23T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2021-05-18T13:34:10+00:00",
          "details": "For details on how to apply this update, which includes the changes described in this advisory, refer to:\n\nhttps://access.redhat.com/articles/11258",
          "product_ids": [
            "AppStream-8.4.0.GA:lemon-0:3.26.0-13.el8.aarch64",
            "AppStream-8.4.0.GA:lemon-0:3.26.0-13.el8.ppc64le",
            "AppStream-8.4.0.GA:lemon-0:3.26.0-13.el8.s390x",
            "AppStream-8.4.0.GA:lemon-0:3.26.0-13.el8.x86_64",
            "AppStream-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.aarch64",
            "AppStream-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.i686",
            "AppStream-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.ppc64le",
            "AppStream-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.s390x",
            "AppStream-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.x86_64",
            "AppStream-8.4.0.GA:sqlite-0:3.26.0-13.el8.aarch64",
            "AppStream-8.4.0.GA:sqlite-0:3.26.0-13.el8.i686",
            "AppStream-8.4.0.GA:sqlite-0:3.26.0-13.el8.ppc64le",
            "AppStream-8.4.0.GA:sqlite-0:3.26.0-13.el8.s390x",
            "AppStream-8.4.0.GA:sqlite-0:3.26.0-13.el8.src",
            "AppStream-8.4.0.GA:sqlite-0:3.26.0-13.el8.x86_64",
            "AppStream-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.aarch64",
            "AppStream-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.i686",
            "AppStream-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.ppc64le",
            "AppStream-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.s390x",
            "AppStream-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.x86_64",
            "AppStream-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.aarch64",
            "AppStream-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.i686",
            "AppStream-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.ppc64le",
            "AppStream-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.s390x",
            "AppStream-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.x86_64",
            "AppStream-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.aarch64",
            "AppStream-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.i686",
            "AppStream-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.ppc64le",
            "AppStream-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.s390x",
            "AppStream-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.x86_64",
            "AppStream-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.aarch64",
            "AppStream-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.i686",
            "AppStream-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.ppc64le",
            "AppStream-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.s390x",
            "AppStream-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.x86_64",
            "AppStream-8.4.0.GA:sqlite-doc-0:3.26.0-13.el8.noarch",
            "AppStream-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.aarch64",
            "AppStream-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.i686",
            "AppStream-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.ppc64le",
            "AppStream-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.s390x",
            "AppStream-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.x86_64",
            "AppStream-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.aarch64",
            "AppStream-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.i686",
            "AppStream-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.ppc64le",
            "AppStream-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.s390x",
            "AppStream-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.x86_64",
            "AppStream-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.aarch64",
            "AppStream-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.i686",
            "AppStream-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.ppc64le",
            "AppStream-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.s390x",
            "AppStream-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.x86_64",
            "BaseOS-8.4.0.GA:lemon-0:3.26.0-13.el8.aarch64",
            "BaseOS-8.4.0.GA:lemon-0:3.26.0-13.el8.ppc64le",
            "BaseOS-8.4.0.GA:lemon-0:3.26.0-13.el8.s390x",
            "BaseOS-8.4.0.GA:lemon-0:3.26.0-13.el8.x86_64",
            "BaseOS-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.aarch64",
            "BaseOS-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.i686",
            "BaseOS-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.ppc64le",
            "BaseOS-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.s390x",
            "BaseOS-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.x86_64",
            "BaseOS-8.4.0.GA:sqlite-0:3.26.0-13.el8.aarch64",
            "BaseOS-8.4.0.GA:sqlite-0:3.26.0-13.el8.i686",
            "BaseOS-8.4.0.GA:sqlite-0:3.26.0-13.el8.ppc64le",
            "BaseOS-8.4.0.GA:sqlite-0:3.26.0-13.el8.s390x",
            "BaseOS-8.4.0.GA:sqlite-0:3.26.0-13.el8.src",
            "BaseOS-8.4.0.GA:sqlite-0:3.26.0-13.el8.x86_64",
            "BaseOS-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.aarch64",
            "BaseOS-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.i686",
            "BaseOS-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.ppc64le",
            "BaseOS-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.s390x",
            "BaseOS-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.x86_64",
            "BaseOS-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.aarch64",
            "BaseOS-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.i686",
            "BaseOS-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.ppc64le",
            "BaseOS-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.s390x",
            "BaseOS-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.x86_64",
            "BaseOS-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.aarch64",
            "BaseOS-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.i686",
            "BaseOS-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.ppc64le",
            "BaseOS-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.s390x",
            "BaseOS-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.x86_64",
            "BaseOS-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.aarch64",
            "BaseOS-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.i686",
            "BaseOS-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.ppc64le",
            "BaseOS-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.s390x",
            "BaseOS-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.x86_64",
            "BaseOS-8.4.0.GA:sqlite-doc-0:3.26.0-13.el8.noarch",
            "BaseOS-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.aarch64",
            "BaseOS-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.i686",
            "BaseOS-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.ppc64le",
            "BaseOS-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.s390x",
            "BaseOS-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.x86_64",
            "BaseOS-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.aarch64",
            "BaseOS-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.i686",
            "BaseOS-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.ppc64le",
            "BaseOS-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.s390x",
            "BaseOS-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.x86_64",
            "BaseOS-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.aarch64",
            "BaseOS-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.i686",
            "BaseOS-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.ppc64le",
            "BaseOS-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.s390x",
            "BaseOS-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.x86_64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2021:1581"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "LOCAL",
            "availabilityImpact": "HIGH",
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "LOW",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "AppStream-8.4.0.GA:lemon-0:3.26.0-13.el8.aarch64",
            "AppStream-8.4.0.GA:lemon-0:3.26.0-13.el8.ppc64le",
            "AppStream-8.4.0.GA:lemon-0:3.26.0-13.el8.s390x",
            "AppStream-8.4.0.GA:lemon-0:3.26.0-13.el8.x86_64",
            "AppStream-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.aarch64",
            "AppStream-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.i686",
            "AppStream-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.ppc64le",
            "AppStream-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.s390x",
            "AppStream-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.x86_64",
            "AppStream-8.4.0.GA:sqlite-0:3.26.0-13.el8.aarch64",
            "AppStream-8.4.0.GA:sqlite-0:3.26.0-13.el8.i686",
            "AppStream-8.4.0.GA:sqlite-0:3.26.0-13.el8.ppc64le",
            "AppStream-8.4.0.GA:sqlite-0:3.26.0-13.el8.s390x",
            "AppStream-8.4.0.GA:sqlite-0:3.26.0-13.el8.src",
            "AppStream-8.4.0.GA:sqlite-0:3.26.0-13.el8.x86_64",
            "AppStream-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.aarch64",
            "AppStream-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.i686",
            "AppStream-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.ppc64le",
            "AppStream-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.s390x",
            "AppStream-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.x86_64",
            "AppStream-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.aarch64",
            "AppStream-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.i686",
            "AppStream-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.ppc64le",
            "AppStream-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.s390x",
            "AppStream-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.x86_64",
            "AppStream-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.aarch64",
            "AppStream-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.i686",
            "AppStream-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.ppc64le",
            "AppStream-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.s390x",
            "AppStream-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.x86_64",
            "AppStream-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.aarch64",
            "AppStream-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.i686",
            "AppStream-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.ppc64le",
            "AppStream-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.s390x",
            "AppStream-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.x86_64",
            "AppStream-8.4.0.GA:sqlite-doc-0:3.26.0-13.el8.noarch",
            "AppStream-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.aarch64",
            "AppStream-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.i686",
            "AppStream-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.ppc64le",
            "AppStream-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.s390x",
            "AppStream-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.x86_64",
            "AppStream-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.aarch64",
            "AppStream-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.i686",
            "AppStream-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.ppc64le",
            "AppStream-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.s390x",
            "AppStream-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.x86_64",
            "AppStream-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.aarch64",
            "AppStream-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.i686",
            "AppStream-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.ppc64le",
            "AppStream-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.s390x",
            "AppStream-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.x86_64",
            "BaseOS-8.4.0.GA:lemon-0:3.26.0-13.el8.aarch64",
            "BaseOS-8.4.0.GA:lemon-0:3.26.0-13.el8.ppc64le",
            "BaseOS-8.4.0.GA:lemon-0:3.26.0-13.el8.s390x",
            "BaseOS-8.4.0.GA:lemon-0:3.26.0-13.el8.x86_64",
            "BaseOS-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.aarch64",
            "BaseOS-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.i686",
            "BaseOS-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.ppc64le",
            "BaseOS-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.s390x",
            "BaseOS-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.x86_64",
            "BaseOS-8.4.0.GA:sqlite-0:3.26.0-13.el8.aarch64",
            "BaseOS-8.4.0.GA:sqlite-0:3.26.0-13.el8.i686",
            "BaseOS-8.4.0.GA:sqlite-0:3.26.0-13.el8.ppc64le",
            "BaseOS-8.4.0.GA:sqlite-0:3.26.0-13.el8.s390x",
            "BaseOS-8.4.0.GA:sqlite-0:3.26.0-13.el8.src",
            "BaseOS-8.4.0.GA:sqlite-0:3.26.0-13.el8.x86_64",
            "BaseOS-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.aarch64",
            "BaseOS-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.i686",
            "BaseOS-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.ppc64le",
            "BaseOS-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.s390x",
            "BaseOS-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.x86_64",
            "BaseOS-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.aarch64",
            "BaseOS-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.i686",
            "BaseOS-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.ppc64le",
            "BaseOS-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.s390x",
            "BaseOS-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.x86_64",
            "BaseOS-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.aarch64",
            "BaseOS-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.i686",
            "BaseOS-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.ppc64le",
            "BaseOS-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.s390x",
            "BaseOS-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.x86_64",
            "BaseOS-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.aarch64",
            "BaseOS-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.i686",
            "BaseOS-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.ppc64le",
            "BaseOS-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.s390x",
            "BaseOS-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.x86_64",
            "BaseOS-8.4.0.GA:sqlite-doc-0:3.26.0-13.el8.noarch",
            "BaseOS-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.aarch64",
            "BaseOS-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.i686",
            "BaseOS-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.ppc64le",
            "BaseOS-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.s390x",
            "BaseOS-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.x86_64",
            "BaseOS-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.aarch64",
            "BaseOS-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.i686",
            "BaseOS-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.ppc64le",
            "BaseOS-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.s390x",
            "BaseOS-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.x86_64",
            "BaseOS-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.aarch64",
            "BaseOS-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.i686",
            "BaseOS-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.ppc64le",
            "BaseOS-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.s390x",
            "BaseOS-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.x86_64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Moderate"
        }
      ],
      "title": "sqlite: integer overflow in sqlite3_str_vappendf function in printf.c"
    },
    {
      "cve": "CVE-2020-15358",
      "cwe": {
        "id": "CWE-122",
        "name": "Heap-based Buffer Overflow"
      },
      "discovery_date": "2020-06-27T00:00:00+00:00",
      "ids": [
        {
          "system_name": "Red Hat Bugzilla ID",
          "text": "1851957"
        }
      ],
      "notes": [
        {
          "category": "description",
          "text": "A heap buffer overflow was found in SQLite in the query flattening optimization technique. This flaw allows an attacker to execute SQL statements to crash the application, resulting in a denial of service.",
          "title": "Vulnerability description"
        },
        {
          "category": "summary",
          "text": "sqlite: heap-based buffer overflow in multiSelectOrderBy due to mishandling of query-flattener optimization in select.c",
          "title": "Vulnerability summary"
        },
        {
          "category": "other",
          "text": "This flaw did not affect the versions of SQLite as shipped with Red Hat Enterprise Linux 7 as they did not include support for the WHERE-clause constant propagation optimization. This optimization was introduced in a later version of the package (3.25.0).",
          "title": "Statement"
        },
        {
          "category": "general",
          "text": "The CVSS score(s) listed for this vulnerability do not reflect the associated product\u0027s status, and are included for informational purposes to better understand the severity of this vulnerability.",
          "title": "CVSS score applicability"
        }
      ],
      "product_status": {
        "fixed": [
          "AppStream-8.4.0.GA:lemon-0:3.26.0-13.el8.aarch64",
          "AppStream-8.4.0.GA:lemon-0:3.26.0-13.el8.ppc64le",
          "AppStream-8.4.0.GA:lemon-0:3.26.0-13.el8.s390x",
          "AppStream-8.4.0.GA:lemon-0:3.26.0-13.el8.x86_64",
          "AppStream-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.aarch64",
          "AppStream-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.i686",
          "AppStream-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.ppc64le",
          "AppStream-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.s390x",
          "AppStream-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.x86_64",
          "AppStream-8.4.0.GA:sqlite-0:3.26.0-13.el8.aarch64",
          "AppStream-8.4.0.GA:sqlite-0:3.26.0-13.el8.i686",
          "AppStream-8.4.0.GA:sqlite-0:3.26.0-13.el8.ppc64le",
          "AppStream-8.4.0.GA:sqlite-0:3.26.0-13.el8.s390x",
          "AppStream-8.4.0.GA:sqlite-0:3.26.0-13.el8.src",
          "AppStream-8.4.0.GA:sqlite-0:3.26.0-13.el8.x86_64",
          "AppStream-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.aarch64",
          "AppStream-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.i686",
          "AppStream-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.ppc64le",
          "AppStream-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.s390x",
          "AppStream-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.x86_64",
          "AppStream-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.aarch64",
          "AppStream-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.i686",
          "AppStream-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.ppc64le",
          "AppStream-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.s390x",
          "AppStream-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.x86_64",
          "AppStream-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.aarch64",
          "AppStream-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.i686",
          "AppStream-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.ppc64le",
          "AppStream-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.s390x",
          "AppStream-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.x86_64",
          "AppStream-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.aarch64",
          "AppStream-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.i686",
          "AppStream-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.ppc64le",
          "AppStream-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.s390x",
          "AppStream-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.x86_64",
          "AppStream-8.4.0.GA:sqlite-doc-0:3.26.0-13.el8.noarch",
          "AppStream-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.aarch64",
          "AppStream-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.i686",
          "AppStream-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.ppc64le",
          "AppStream-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.s390x",
          "AppStream-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.x86_64",
          "AppStream-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.aarch64",
          "AppStream-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.i686",
          "AppStream-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.ppc64le",
          "AppStream-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.s390x",
          "AppStream-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.x86_64",
          "AppStream-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.aarch64",
          "AppStream-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.i686",
          "AppStream-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.ppc64le",
          "AppStream-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.s390x",
          "AppStream-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.x86_64",
          "BaseOS-8.4.0.GA:lemon-0:3.26.0-13.el8.aarch64",
          "BaseOS-8.4.0.GA:lemon-0:3.26.0-13.el8.ppc64le",
          "BaseOS-8.4.0.GA:lemon-0:3.26.0-13.el8.s390x",
          "BaseOS-8.4.0.GA:lemon-0:3.26.0-13.el8.x86_64",
          "BaseOS-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.aarch64",
          "BaseOS-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.i686",
          "BaseOS-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.ppc64le",
          "BaseOS-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.s390x",
          "BaseOS-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.x86_64",
          "BaseOS-8.4.0.GA:sqlite-0:3.26.0-13.el8.aarch64",
          "BaseOS-8.4.0.GA:sqlite-0:3.26.0-13.el8.i686",
          "BaseOS-8.4.0.GA:sqlite-0:3.26.0-13.el8.ppc64le",
          "BaseOS-8.4.0.GA:sqlite-0:3.26.0-13.el8.s390x",
          "BaseOS-8.4.0.GA:sqlite-0:3.26.0-13.el8.src",
          "BaseOS-8.4.0.GA:sqlite-0:3.26.0-13.el8.x86_64",
          "BaseOS-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.aarch64",
          "BaseOS-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.i686",
          "BaseOS-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.ppc64le",
          "BaseOS-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.s390x",
          "BaseOS-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.x86_64",
          "BaseOS-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.aarch64",
          "BaseOS-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.i686",
          "BaseOS-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.ppc64le",
          "BaseOS-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.s390x",
          "BaseOS-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.x86_64",
          "BaseOS-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.aarch64",
          "BaseOS-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.i686",
          "BaseOS-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.ppc64le",
          "BaseOS-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.s390x",
          "BaseOS-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.x86_64",
          "BaseOS-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.aarch64",
          "BaseOS-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.i686",
          "BaseOS-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.ppc64le",
          "BaseOS-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.s390x",
          "BaseOS-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.x86_64",
          "BaseOS-8.4.0.GA:sqlite-doc-0:3.26.0-13.el8.noarch",
          "BaseOS-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.aarch64",
          "BaseOS-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.i686",
          "BaseOS-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.ppc64le",
          "BaseOS-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.s390x",
          "BaseOS-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.x86_64",
          "BaseOS-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.aarch64",
          "BaseOS-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.i686",
          "BaseOS-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.ppc64le",
          "BaseOS-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.s390x",
          "BaseOS-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.x86_64",
          "BaseOS-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.aarch64",
          "BaseOS-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.i686",
          "BaseOS-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.ppc64le",
          "BaseOS-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.s390x",
          "BaseOS-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.x86_64"
        ]
      },
      "references": [
        {
          "category": "self",
          "summary": "Canonical URL",
          "url": "https://access.redhat.com/security/cve/CVE-2020-15358"
        },
        {
          "category": "external",
          "summary": "RHBZ#1851957",
          "url": "https://bugzilla.redhat.com/show_bug.cgi?id=1851957"
        },
        {
          "category": "external",
          "summary": "https://www.cve.org/CVERecord?id=CVE-2020-15358",
          "url": "https://www.cve.org/CVERecord?id=CVE-2020-15358"
        },
        {
          "category": "external",
          "summary": "https://nvd.nist.gov/vuln/detail/CVE-2020-15358",
          "url": "https://nvd.nist.gov/vuln/detail/CVE-2020-15358"
        }
      ],
      "release_date": "2020-06-15T00:00:00+00:00",
      "remediations": [
        {
          "category": "vendor_fix",
          "date": "2021-05-18T13:34:10+00:00",
          "details": "For details on how to apply this update, which includes the changes described in this advisory, refer to:\n\nhttps://access.redhat.com/articles/11258",
          "product_ids": [
            "AppStream-8.4.0.GA:lemon-0:3.26.0-13.el8.aarch64",
            "AppStream-8.4.0.GA:lemon-0:3.26.0-13.el8.ppc64le",
            "AppStream-8.4.0.GA:lemon-0:3.26.0-13.el8.s390x",
            "AppStream-8.4.0.GA:lemon-0:3.26.0-13.el8.x86_64",
            "AppStream-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.aarch64",
            "AppStream-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.i686",
            "AppStream-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.ppc64le",
            "AppStream-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.s390x",
            "AppStream-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.x86_64",
            "AppStream-8.4.0.GA:sqlite-0:3.26.0-13.el8.aarch64",
            "AppStream-8.4.0.GA:sqlite-0:3.26.0-13.el8.i686",
            "AppStream-8.4.0.GA:sqlite-0:3.26.0-13.el8.ppc64le",
            "AppStream-8.4.0.GA:sqlite-0:3.26.0-13.el8.s390x",
            "AppStream-8.4.0.GA:sqlite-0:3.26.0-13.el8.src",
            "AppStream-8.4.0.GA:sqlite-0:3.26.0-13.el8.x86_64",
            "AppStream-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.aarch64",
            "AppStream-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.i686",
            "AppStream-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.ppc64le",
            "AppStream-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.s390x",
            "AppStream-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.x86_64",
            "AppStream-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.aarch64",
            "AppStream-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.i686",
            "AppStream-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.ppc64le",
            "AppStream-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.s390x",
            "AppStream-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.x86_64",
            "AppStream-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.aarch64",
            "AppStream-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.i686",
            "AppStream-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.ppc64le",
            "AppStream-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.s390x",
            "AppStream-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.x86_64",
            "AppStream-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.aarch64",
            "AppStream-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.i686",
            "AppStream-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.ppc64le",
            "AppStream-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.s390x",
            "AppStream-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.x86_64",
            "AppStream-8.4.0.GA:sqlite-doc-0:3.26.0-13.el8.noarch",
            "AppStream-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.aarch64",
            "AppStream-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.i686",
            "AppStream-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.ppc64le",
            "AppStream-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.s390x",
            "AppStream-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.x86_64",
            "AppStream-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.aarch64",
            "AppStream-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.i686",
            "AppStream-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.ppc64le",
            "AppStream-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.s390x",
            "AppStream-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.x86_64",
            "AppStream-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.aarch64",
            "AppStream-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.i686",
            "AppStream-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.ppc64le",
            "AppStream-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.s390x",
            "AppStream-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.x86_64",
            "BaseOS-8.4.0.GA:lemon-0:3.26.0-13.el8.aarch64",
            "BaseOS-8.4.0.GA:lemon-0:3.26.0-13.el8.ppc64le",
            "BaseOS-8.4.0.GA:lemon-0:3.26.0-13.el8.s390x",
            "BaseOS-8.4.0.GA:lemon-0:3.26.0-13.el8.x86_64",
            "BaseOS-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.aarch64",
            "BaseOS-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.i686",
            "BaseOS-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.ppc64le",
            "BaseOS-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.s390x",
            "BaseOS-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.x86_64",
            "BaseOS-8.4.0.GA:sqlite-0:3.26.0-13.el8.aarch64",
            "BaseOS-8.4.0.GA:sqlite-0:3.26.0-13.el8.i686",
            "BaseOS-8.4.0.GA:sqlite-0:3.26.0-13.el8.ppc64le",
            "BaseOS-8.4.0.GA:sqlite-0:3.26.0-13.el8.s390x",
            "BaseOS-8.4.0.GA:sqlite-0:3.26.0-13.el8.src",
            "BaseOS-8.4.0.GA:sqlite-0:3.26.0-13.el8.x86_64",
            "BaseOS-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.aarch64",
            "BaseOS-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.i686",
            "BaseOS-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.ppc64le",
            "BaseOS-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.s390x",
            "BaseOS-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.x86_64",
            "BaseOS-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.aarch64",
            "BaseOS-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.i686",
            "BaseOS-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.ppc64le",
            "BaseOS-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.s390x",
            "BaseOS-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.x86_64",
            "BaseOS-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.aarch64",
            "BaseOS-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.i686",
            "BaseOS-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.ppc64le",
            "BaseOS-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.s390x",
            "BaseOS-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.x86_64",
            "BaseOS-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.aarch64",
            "BaseOS-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.i686",
            "BaseOS-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.ppc64le",
            "BaseOS-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.s390x",
            "BaseOS-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.x86_64",
            "BaseOS-8.4.0.GA:sqlite-doc-0:3.26.0-13.el8.noarch",
            "BaseOS-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.aarch64",
            "BaseOS-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.i686",
            "BaseOS-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.ppc64le",
            "BaseOS-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.s390x",
            "BaseOS-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.x86_64",
            "BaseOS-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.aarch64",
            "BaseOS-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.i686",
            "BaseOS-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.ppc64le",
            "BaseOS-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.s390x",
            "BaseOS-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.x86_64",
            "BaseOS-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.aarch64",
            "BaseOS-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.i686",
            "BaseOS-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.ppc64le",
            "BaseOS-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.s390x",
            "BaseOS-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.x86_64"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://access.redhat.com/errata/RHSA-2021:1581"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "LOCAL",
            "availabilityImpact": "HIGH",
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "NONE",
            "integrityImpact": "NONE",
            "privilegesRequired": "LOW",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "products": [
            "AppStream-8.4.0.GA:lemon-0:3.26.0-13.el8.aarch64",
            "AppStream-8.4.0.GA:lemon-0:3.26.0-13.el8.ppc64le",
            "AppStream-8.4.0.GA:lemon-0:3.26.0-13.el8.s390x",
            "AppStream-8.4.0.GA:lemon-0:3.26.0-13.el8.x86_64",
            "AppStream-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.aarch64",
            "AppStream-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.i686",
            "AppStream-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.ppc64le",
            "AppStream-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.s390x",
            "AppStream-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.x86_64",
            "AppStream-8.4.0.GA:sqlite-0:3.26.0-13.el8.aarch64",
            "AppStream-8.4.0.GA:sqlite-0:3.26.0-13.el8.i686",
            "AppStream-8.4.0.GA:sqlite-0:3.26.0-13.el8.ppc64le",
            "AppStream-8.4.0.GA:sqlite-0:3.26.0-13.el8.s390x",
            "AppStream-8.4.0.GA:sqlite-0:3.26.0-13.el8.src",
            "AppStream-8.4.0.GA:sqlite-0:3.26.0-13.el8.x86_64",
            "AppStream-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.aarch64",
            "AppStream-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.i686",
            "AppStream-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.ppc64le",
            "AppStream-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.s390x",
            "AppStream-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.x86_64",
            "AppStream-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.aarch64",
            "AppStream-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.i686",
            "AppStream-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.ppc64le",
            "AppStream-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.s390x",
            "AppStream-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.x86_64",
            "AppStream-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.aarch64",
            "AppStream-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.i686",
            "AppStream-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.ppc64le",
            "AppStream-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.s390x",
            "AppStream-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.x86_64",
            "AppStream-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.aarch64",
            "AppStream-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.i686",
            "AppStream-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.ppc64le",
            "AppStream-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.s390x",
            "AppStream-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.x86_64",
            "AppStream-8.4.0.GA:sqlite-doc-0:3.26.0-13.el8.noarch",
            "AppStream-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.aarch64",
            "AppStream-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.i686",
            "AppStream-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.ppc64le",
            "AppStream-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.s390x",
            "AppStream-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.x86_64",
            "AppStream-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.aarch64",
            "AppStream-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.i686",
            "AppStream-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.ppc64le",
            "AppStream-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.s390x",
            "AppStream-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.x86_64",
            "AppStream-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.aarch64",
            "AppStream-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.i686",
            "AppStream-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.ppc64le",
            "AppStream-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.s390x",
            "AppStream-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.x86_64",
            "BaseOS-8.4.0.GA:lemon-0:3.26.0-13.el8.aarch64",
            "BaseOS-8.4.0.GA:lemon-0:3.26.0-13.el8.ppc64le",
            "BaseOS-8.4.0.GA:lemon-0:3.26.0-13.el8.s390x",
            "BaseOS-8.4.0.GA:lemon-0:3.26.0-13.el8.x86_64",
            "BaseOS-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.aarch64",
            "BaseOS-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.i686",
            "BaseOS-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.ppc64le",
            "BaseOS-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.s390x",
            "BaseOS-8.4.0.GA:lemon-debuginfo-0:3.26.0-13.el8.x86_64",
            "BaseOS-8.4.0.GA:sqlite-0:3.26.0-13.el8.aarch64",
            "BaseOS-8.4.0.GA:sqlite-0:3.26.0-13.el8.i686",
            "BaseOS-8.4.0.GA:sqlite-0:3.26.0-13.el8.ppc64le",
            "BaseOS-8.4.0.GA:sqlite-0:3.26.0-13.el8.s390x",
            "BaseOS-8.4.0.GA:sqlite-0:3.26.0-13.el8.src",
            "BaseOS-8.4.0.GA:sqlite-0:3.26.0-13.el8.x86_64",
            "BaseOS-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.aarch64",
            "BaseOS-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.i686",
            "BaseOS-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.ppc64le",
            "BaseOS-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.s390x",
            "BaseOS-8.4.0.GA:sqlite-analyzer-debuginfo-0:3.26.0-13.el8.x86_64",
            "BaseOS-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.aarch64",
            "BaseOS-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.i686",
            "BaseOS-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.ppc64le",
            "BaseOS-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.s390x",
            "BaseOS-8.4.0.GA:sqlite-debuginfo-0:3.26.0-13.el8.x86_64",
            "BaseOS-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.aarch64",
            "BaseOS-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.i686",
            "BaseOS-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.ppc64le",
            "BaseOS-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.s390x",
            "BaseOS-8.4.0.GA:sqlite-debugsource-0:3.26.0-13.el8.x86_64",
            "BaseOS-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.aarch64",
            "BaseOS-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.i686",
            "BaseOS-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.ppc64le",
            "BaseOS-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.s390x",
            "BaseOS-8.4.0.GA:sqlite-devel-0:3.26.0-13.el8.x86_64",
            "BaseOS-8.4.0.GA:sqlite-doc-0:3.26.0-13.el8.noarch",
            "BaseOS-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.aarch64",
            "BaseOS-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.i686",
            "BaseOS-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.ppc64le",
            "BaseOS-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.s390x",
            "BaseOS-8.4.0.GA:sqlite-libs-0:3.26.0-13.el8.x86_64",
            "BaseOS-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.aarch64",
            "BaseOS-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.i686",
            "BaseOS-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.ppc64le",
            "BaseOS-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.s390x",
            "BaseOS-8.4.0.GA:sqlite-libs-debuginfo-0:3.26.0-13.el8.x86_64",
            "BaseOS-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.aarch64",
            "BaseOS-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.i686",
            "BaseOS-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.ppc64le",
            "BaseOS-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.s390x",
            "BaseOS-8.4.0.GA:sqlite-tcl-debuginfo-0:3.26.0-13.el8.x86_64"
          ]
        }
      ],
      "threats": [
        {
          "category": "impact",
          "details": "Moderate"
        }
      ],
      "title": "sqlite: heap-based buffer overflow in multiSelectOrderBy due to mishandling of query-flattener optimization in select.c"
    }
  ]
}

{
  "@context": {
    "@vocab": "https://www.variotdbs.pl/ref/VARIoTentry#",
    "affected_products": {
      "@id": "https://www.variotdbs.pl/ref/affected_products"
    },
    "configurations": {
      "@id": "https://www.variotdbs.pl/ref/configurations"
    },
    "credits": {
      "@id": "https://www.variotdbs.pl/ref/credits"
    },
    "cvss": {
      "@id": "https://www.variotdbs.pl/ref/cvss/"
    },
    "description": {
      "@id": "https://www.variotdbs.pl/ref/description/"
    },
    "exploit_availability": {
      "@id": "https://www.variotdbs.pl/ref/exploit_availability/"
    },
    "external_ids": {
      "@id": "https://www.variotdbs.pl/ref/external_ids/"
    },
    "iot": {
      "@id": "https://www.variotdbs.pl/ref/iot/"
    },
    "iot_taxonomy": {
      "@id": "https://www.variotdbs.pl/ref/iot_taxonomy/"
    },
    "patch": {
      "@id": "https://www.variotdbs.pl/ref/patch/"
    },
    "problemtype_data": {
      "@id": "https://www.variotdbs.pl/ref/problemtype_data/"
    },
    "references": {
      "@id": "https://www.variotdbs.pl/ref/references/"
    },
    "sources": {
      "@id": "https://www.variotdbs.pl/ref/sources/"
    },
    "sources_release_date": {
      "@id": "https://www.variotdbs.pl/ref/sources_release_date/"
    },
    "sources_update_date": {
      "@id": "https://www.variotdbs.pl/ref/sources_update_date/"
    },
    "threat_type": {
      "@id": "https://www.variotdbs.pl/ref/threat_type/"
    },
    "title": {
      "@id": "https://www.variotdbs.pl/ref/title/"
    },
    "type": {
      "@id": "https://www.variotdbs.pl/ref/type/"
    }
  },
  "@id": "https://www.variotdbs.pl/vuln/VAR-202005-0473",
  "affected_products": {
    "@context": {
      "@vocab": "https://www.variotdbs.pl/ref/affected_products#",
      "data": {
        "@container": "@list"
      },
      "sources": {
        "@container": "@list",
        "@context": {
          "@vocab": "https://www.variotdbs.pl/ref/sources#"
        },
        "@id": "https://www.variotdbs.pl/ref/sources"
      }
    },
    "data": [
      {
        "model": "communications cloud native core policy",
        "scope": "eq",
        "trust": 1.0,
        "vendor": "oracle",
        "version": "1.14.0"
      },
      {
        "model": "itunes",
        "scope": "lt",
        "trust": 1.0,
        "vendor": "apple",
        "version": "12.10.9"
      },
      {
        "model": "outside in technology",
        "scope": "eq",
        "trust": 1.0,
        "vendor": "oracle",
        "version": "8.5.5"
      },
      {
        "model": "ipados",
        "scope": "lt",
        "trust": 1.0,
        "vendor": "apple",
        "version": "14.0"
      },
      {
        "model": "linux",
        "scope": "eq",
        "trust": 1.0,
        "vendor": "debian",
        "version": "9.0"
      },
      {
        "model": "freebsd",
        "scope": "eq",
        "trust": 1.0,
        "vendor": "freebsd",
        "version": "11.4"
      },
      {
        "model": "communications network charging and control",
        "scope": "lte",
        "trust": 1.0,
        "vendor": "oracle",
        "version": "12.0.3"
      },
      {
        "model": "fedora",
        "scope": "eq",
        "trust": 1.0,
        "vendor": "fedoraproject",
        "version": "32"
      },
      {
        "model": "linux",
        "scope": "eq",
        "trust": 1.0,
        "vendor": "debian",
        "version": "8.0"
      },
      {
        "model": "sqlite",
        "scope": "lte",
        "trust": 1.0,
        "vendor": "sqlite",
        "version": "3.32.0"
      },
      {
        "model": "ubuntu linux",
        "scope": "eq",
        "trust": 1.0,
        "vendor": "canonical",
        "version": "16.04"
      },
      {
        "model": "ubuntu linux",
        "scope": "eq",
        "trust": 1.0,
        "vendor": "canonical",
        "version": "20.04"
      },
      {
        "model": "tvos",
        "scope": "lt",
        "trust": 1.0,
        "vendor": "apple",
        "version": "14.0"
      },
      {
        "model": "freebsd",
        "scope": "lt",
        "trust": 1.0,
        "vendor": "freebsd",
        "version": "11.4"
      },
      {
        "model": "ubuntu linux",
        "scope": "eq",
        "trust": 1.0,
        "vendor": "canonical",
        "version": "18.04"
      },
      {
        "model": "freebsd",
        "scope": "eq",
        "trust": 1.0,
        "vendor": "freebsd",
        "version": "12.0"
      },
      {
        "model": "watchos",
        "scope": "lt",
        "trust": 1.0,
        "vendor": "apple",
        "version": "7.0"
      },
      {
        "model": "iphone os",
        "scope": "lt",
        "trust": 1.0,
        "vendor": "apple",
        "version": "14.0"
      },
      {
        "model": "icloud",
        "scope": "lt",
        "trust": 1.0,
        "vendor": "apple",
        "version": "11.5"
      },
      {
        "model": "freebsd",
        "scope": "eq",
        "trust": 1.0,
        "vendor": "freebsd",
        "version": "12.1"
      },
      {
        "model": "ubuntu linux",
        "scope": "eq",
        "trust": 1.0,
        "vendor": "canonical",
        "version": "19.10"
      },
      {
        "model": "freebsd",
        "scope": "gte",
        "trust": 1.0,
        "vendor": "freebsd",
        "version": "11.0"
      },
      {
        "model": "communications network charging and control",
        "scope": "gte",
        "trust": 1.0,
        "vendor": "oracle",
        "version": "12.0.0"
      },
      {
        "model": "communications network charging and control",
        "scope": "eq",
        "trust": 1.0,
        "vendor": "oracle",
        "version": "6.0.1"
      },
      {
        "model": "macos",
        "scope": "gte",
        "trust": 1.0,
        "vendor": "apple",
        "version": "11.0"
      },
      {
        "model": "macos",
        "scope": "lt",
        "trust": 1.0,
        "vendor": "apple",
        "version": "11.0.1"
      }
    ],
    "sources": [
      {
        "db": "NVD",
        "id": "CVE-2020-13434"
      }
    ]
  },
  "configurations": {
    "@context": {
      "@vocab": "https://www.variotdbs.pl/ref/configurations#",
      "children": {
        "@container": "@list"
      },
      "cpe_match": {
        "@container": "@list"
      },
      "data": {
        "@container": "@list"
      },
      "nodes": {
        "@container": "@list"
      }
    },
    "data": [
      {
        "CVE_data_version": "4.0",
        "nodes": [
          {
            "children": [],
            "cpe_match": [
              {
                "cpe23Uri": "cpe:2.3:a:sqlite:sqlite:*:*:*:*:*:*:*:*",
                "cpe_name": [],
                "versionEndIncluding": "3.32.0",
                "vulnerable": true
              }
            ],
            "operator": "OR"
          },
          {
            "children": [],
            "cpe_match": [
              {
                "cpe23Uri": "cpe:2.3:o:debian:debian_linux:8.0:*:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:debian:debian_linux:9.0:*:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              }
            ],
            "operator": "OR"
          },
          {
            "children": [],
            "cpe_match": [
              {
                "cpe23Uri": "cpe:2.3:o:fedoraproject:fedora:32:*:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              }
            ],
            "operator": "OR"
          },
          {
            "children": [],
            "cpe_match": [
              {
                "cpe23Uri": "cpe:2.3:o:canonical:ubuntu_linux:18.04:*:*:*:lts:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:canonical:ubuntu_linux:19.10:*:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:canonical:ubuntu_linux:20.04:*:*:*:lts:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:canonical:ubuntu_linux:16.04:*:*:*:esm:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              }
            ],
            "operator": "OR"
          },
          {
            "children": [],
            "cpe_match": [
              {
                "cpe23Uri": "cpe:2.3:o:freebsd:freebsd:12.0:p1:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:freebsd:freebsd:12.0:-:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:freebsd:freebsd:12.0:p3:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:freebsd:freebsd:12.0:p2:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:freebsd:freebsd:12.0:p4:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:freebsd:freebsd:12.0:p5:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:freebsd:freebsd:12.0:p6:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:freebsd:freebsd:12.0:p8:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:freebsd:freebsd:12.1:p1:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:freebsd:freebsd:12.1:-:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:freebsd:freebsd:12.0:p7:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:freebsd:freebsd:12.0:p9:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:freebsd:freebsd:12.0:p10:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:freebsd:freebsd:12.0:p11:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:freebsd:freebsd:12.0:p12:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:freebsd:freebsd:12.1:p2:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:freebsd:freebsd:12.1:p3:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:freebsd:freebsd:12.1:p4:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:freebsd:freebsd:11.4:-:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:freebsd:freebsd:12.1:p5:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:freebsd:freebsd:12.1:p6:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:freebsd:freebsd:11.4:p1:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:freebsd:freebsd:12.1:p7:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:freebsd:freebsd:*:*:*:*:*:*:*:*",
                "cpe_name": [],
                "versionEndExcluding": "11.4",
                "versionStartIncluding": "11.0",
                "vulnerable": true
              }
            ],
            "operator": "OR"
          },
          {
            "children": [],
            "cpe_match": [
              {
                "cpe23Uri": "cpe:2.3:a:oracle:outside_in_technology:8.5.5:*:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:a:oracle:communications_network_charging_and_control:6.0.1:*:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:a:oracle:communications_network_charging_and_control:*:*:*:*:*:*:*:*",
                "cpe_name": [],
                "versionEndIncluding": "12.0.3",
                "versionStartIncluding": "12.0.0",
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:a:oracle:communications_cloud_native_core_policy:1.14.0:*:*:*:*:*:*:*",
                "cpe_name": [],
                "vulnerable": true
              }
            ],
            "operator": "OR"
          },
          {
            "children": [],
            "cpe_match": [
              {
                "cpe23Uri": "cpe:2.3:o:apple:iphone_os:*:*:*:*:*:*:*:*",
                "cpe_name": [],
                "versionEndExcluding": "14.0",
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:apple:watchos:*:*:*:*:*:*:*:*",
                "cpe_name": [],
                "versionEndExcluding": "7.0",
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:apple:tvos:*:*:*:*:*:*:*:*",
                "cpe_name": [],
                "versionEndExcluding": "14.0",
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:apple:ipados:*:*:*:*:*:*:*:*",
                "cpe_name": [],
                "versionEndExcluding": "14.0",
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:a:apple:icloud:*:*:*:*:*:windows:*:*",
                "cpe_name": [],
                "versionEndExcluding": "11.5",
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:a:apple:itunes:*:*:*:*:*:windows:*:*",
                "cpe_name": [],
                "versionEndExcluding": "12.10.9",
                "vulnerable": true
              },
              {
                "cpe23Uri": "cpe:2.3:o:apple:macos:*:*:*:*:*:*:*:*",
                "cpe_name": [],
                "versionEndExcluding": "11.0.1",
                "versionStartIncluding": "11.0",
                "vulnerable": true
              }
            ],
            "operator": "OR"
          }
        ]
      }
    ],
    "sources": [
      {
        "db": "NVD",
        "id": "CVE-2020-13434"
      }
    ]
  },
  "credits": {
    "@context": {
      "@vocab": "https://www.variotdbs.pl/ref/credits#",
      "sources": {
        "@container": "@list",
        "@context": {
          "@vocab": "https://www.variotdbs.pl/ref/sources#"
        }
      }
    },
    "data": "Red Hat",
    "sources": [
      {
        "db": "PACKETSTORM",
        "id": "162628"
      },
      {
        "db": "PACKETSTORM",
        "id": "163209"
      },
      {
        "db": "PACKETSTORM",
        "id": "163496"
      },
      {
        "db": "PACKETSTORM",
        "id": "163789"
      },
      {
        "db": "CNNVD",
        "id": "CNNVD-202005-1159"
      }
    ],
    "trust": 1.0
  },
  "cve": "CVE-2020-13434",
  "cvss": {
    "@context": {
      "cvssV2": {
        "@container": "@list",
        "@context": {
          "@vocab": "https://www.variotdbs.pl/ref/cvss/cvssV2#"
        },
        "@id": "https://www.variotdbs.pl/ref/cvss/cvssV2"
      },
      "cvssV3": {
        "@container": "@list",
        "@context": {
          "@vocab": "https://www.variotdbs.pl/ref/cvss/cvssV3#"
        },
        "@id": "https://www.variotdbs.pl/ref/cvss/cvssV3/"
      },
      "severity": {
        "@container": "@list",
        "@context": {
          "@vocab": "https://www.variotdbs.pl/cvss/severity#"
        },
        "@id": "https://www.variotdbs.pl/ref/cvss/severity"
      },
      "sources": {
        "@container": "@list",
        "@context": {
          "@vocab": "https://www.variotdbs.pl/ref/sources#"
        },
        "@id": "https://www.variotdbs.pl/ref/sources"
      }
    },
    "data": [
      {
        "cvssV2": [
          {
            "acInsufInfo": false,
            "accessComplexity": "LOW",
            "accessVector": "LOCAL",
            "authentication": "NONE",
            "author": "NVD",
            "availabilityImpact": "PARTIAL",
            "baseScore": 2.1,
            "confidentialityImpact": "NONE",
            "exploitabilityScore": 3.9,
            "impactScore": 2.9,
            "integrityImpact": "NONE",
            "obtainAllPrivilege": false,
            "obtainOtherPrivilege": false,
            "obtainUserPrivilege": false,
            "severity": "LOW",
            "trust": 1.0,
            "userInteractionRequired": false,
            "vectorString": "AV:L/AC:L/Au:N/C:N/I:N/A:P",
            "version": "2.0"
          },
          {
            "accessComplexity": "LOW",
            "accessVector": "LOCAL",
            "authentication": "NONE",
            "author": "VULHUB",
            "availabilityImpact": "PARTIAL",
            "baseScore": 2.1,
            "confidentialityImpact": "NONE",
            "exploitabilityScore": 3.9,
            "id": "VHN-166212",
            "impactScore": 2.9,
            "integrityImpact": "NONE",
            "severity": "LOW",
            "trust": 0.1,
            "vectorString": "AV:L/AC:L/AU:N/C:N/I:N/A:P",
            "version": "2.0"
          },
          {
            "acInsufInfo": null,
            "accessComplexity": "LOW",
            "accessVector": "LOCAL",
            "authentication": "NONE",
            "author": "VULMON",
            "availabilityImpact": "PARTIAL",
            "baseScore": 2.1,
            "confidentialityImpact": "NONE",
            "exploitabilityScore": 3.9,
            "id": "CVE-2020-13434",
            "impactScore": 2.9,
            "integrityImpact": "NONE",
            "obtainAllPrivilege": null,
            "obtainOtherPrivilege": null,
            "obtainUserPrivilege": null,
            "severity": "LOW",
            "trust": 0.1,
            "userInteractionRequired": null,
            "vectorString": "AV:L/AC:L/Au:N/C:N/I:N/A:P",
            "version": "2.0"
          }
        ],
        "cvssV3": [
          {
            "attackComplexity": "LOW",
            "attackVector": "LOCAL",
            "author": "NVD",
            "availabilityImpact": "HIGH",
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "NONE",
            "exploitabilityScore": 1.8,
            "impactScore": 3.6,
            "integrityImpact": "NONE",
            "privilegesRequired": "LOW",
            "scope": "UNCHANGED",
            "trust": 1.0,
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          }
        ],
        "severity": [
          {
            "author": "NVD",
            "id": "CVE-2020-13434",
            "trust": 1.0,
            "value": "MEDIUM"
          },
          {
            "author": "CNNVD",
            "id": "CNNVD-202005-1159",
            "trust": 0.6,
            "value": "MEDIUM"
          },
          {
            "author": "VULHUB",
            "id": "VHN-166212",
            "trust": 0.1,
            "value": "LOW"
          },
          {
            "author": "VULMON",
            "id": "CVE-2020-13434",
            "trust": 0.1,
            "value": "LOW"
          }
        ]
      }
    ],
    "sources": [
      {
        "db": "VULHUB",
        "id": "VHN-166212"
      },
      {
        "db": "VULMON",
        "id": "CVE-2020-13434"
      },
      {
        "db": "CNNVD",
        "id": "CNNVD-202005-1159"
      },
      {
        "db": "NVD",
        "id": "CVE-2020-13434"
      }
    ]
  },
  "description": {
    "@context": {
      "@vocab": "https://www.variotdbs.pl/ref/description#",
      "sources": {
        "@container": "@list",
        "@context": {
          "@vocab": "https://www.variotdbs.pl/ref/sources#"
        }
      }
    },
    "data": "SQLite through 3.32.0 has an integer overflow in sqlite3_str_vappendf in printf.c. SQLite is an open source embedded relational database management system based on C language developed by American D.Richard Hipp software developer. The system has the characteristics of independence, isolation and cross-platform. The sqlite3_str_vappendf of the printf.c file in SQLite 3.32.0 and earlier versions has an input validation error vulnerability. A remote attacker could exploit this vulnerability to execute arbitrary code by sending a specially crafted request. 8) - aarch64, noarch, ppc64le, s390x, x86_64\n\n3. Description:\n\nSQLite is a C library that implements an SQL database engine. A large\nsubset of SQL92 is supported. A complete database is stored in a single\ndisk file. The API is designed for convenience and ease of use. \nApplications that link against SQLite can enjoy the power and flexibility\nof an SQL database without the administrative hassles of supporting a\nseparate database server. \n\nAdditional Changes:\n\nFor detailed information on changes in this release, see the Red Hat\nEnterprise Linux 8.4 Release Notes linked from the References section.  Our key and\ndetails on how to verify the signature are available from\nhttps://access.redhat.com/security/team/key/\n\n7. -----BEGIN PGP SIGNED MESSAGE-----\nHash: SHA256\n\n====================================================================                   \nRed Hat Security Advisory\n\nSynopsis:          Moderate: Red Hat OpenShift Container Storage 4.6.5 security and bug fix update\nAdvisory ID:       RHSA-2021:2479-01\nProduct:           Red Hat OpenShift Container Storage\nAdvisory URL:      https://access.redhat.com/errata/RHSA-2021:2479\nIssue date:        2021-06-17\nCVE Names:         CVE-2016-10228 CVE-2017-14502 CVE-2019-2708\n                   CVE-2019-3842 CVE-2019-9169 CVE-2019-13012\n                   CVE-2019-14866 CVE-2019-25013 CVE-2020-8231\n                   CVE-2020-8284 CVE-2020-8285 CVE-2020-8286\n                   CVE-2020-8927 CVE-2020-9948 CVE-2020-9951\n                   CVE-2020-9983 CVE-2020-13434 CVE-2020-13543\n                   CVE-2020-13584 CVE-2020-13776 CVE-2020-15358\n                   CVE-2020-24977 CVE-2020-25659 CVE-2020-25678\n                   CVE-2020-26116 CVE-2020-26137 CVE-2020-27618\n                   CVE-2020-27619 CVE-2020-27783 CVE-2020-28196\n                   CVE-2020-29361 CVE-2020-29362 CVE-2020-29363\n                   CVE-2020-36242 CVE-2021-3139 CVE-2021-3177\n                   CVE-2021-3326 CVE-2021-3449 CVE-2021-3450\n                   CVE-2021-3528 CVE-2021-20305 CVE-2021-23239\n                   CVE-2021-23240 CVE-2021-23336\n====================================================================\n1. Summary:\n\nUpdated images that fix one security issue and several bugs are now\navailable for Red Hat OpenShift Container Storage 4.6.5 on Red Hat\nEnterprise Linux 8 from Red Hat Container Registry. \n\nRed Hat Product Security has rated this update as having a security impact\nof Moderate. A Common Vulnerability Scoring System (CVSS) base score, which\ngives a detailed severity rating, is available for each vulnerability from\nthe CVE link(s) in the References section. Description:\n\nRed Hat OpenShift Container Storage is software-defined storage integrated\nwith and optimized for the Red Hat OpenShift Container Platform. Red Hat\nOpenShift Container Storage is a highly scalable, production-grade\npersistent storage for stateful applications running in the Red Hat\nOpenShift Container Platform. In addition to persistent storage, Red Hat\nOpenShift Container Storage provisions a multicloud data management service\nwith an S3 compatible API. \n\nSecurity Fix(es):\n\n* NooBaa: noobaa-operator leaking RPC AuthToken into log files\n(CVE-2021-3528)\n\nFor more details about the security issue(s), including the impact, a CVSS\nscore, and other related information, refer to the CVE page(s) listed in\nthe References section. \n\nBug Fix(es):\n\n* Currently, a newly restored PVC cannot be mounted if some of the\nOpenShift Container Platform nodes are running on a version of Red Hat\nEnterprise Linux which is less than 8.2, and the snapshot from which the\nPVC was restored is deleted. \nWorkaround: Do not delete the snapshot from which the PVC was restored\nuntil the restored PVC is deleted. (BZ#1962483)\n\n* Previously, the default backingstore was not created on AWS S3 when\nOpenShift Container Storage was deployed, due to incorrect identification\nof AWS S3. With this update, the default backingstore gets created when\nOpenShift Container Storage is deployed on AWS S3. (BZ#1927307)\n\n* Previously, log messages were printed to the endpoint pod log even if the\ndebug option was not set. With this update, the log messages are printed to\nthe endpoint pod log only when the debug option is set. (BZ#1938106)\n\n* Previously, the PVCs could not be provisioned as the `rook-ceph-mds` did\nnot register the pod IP on the monitor servers, and hence every mount on\nthe filesystem timed out, resulting in CephFS volume provisioning failure. \nWith this update, an argument `--public-addr=podIP` is added to the MDS pod\nwhen the host network is not enabled, and hence the CephFS volume\nprovisioning does not fail. (BZ#1949558)\n\n* Previously, OpenShift Container Storage 4.2 clusters were not updated\nwith the correct cache value, and hence MDSs in standby-replay might report\nan oversized cache, as rook did not apply the `mds_cache_memory_limit`\nargument during upgrades. With this update, the `mds_cache_memory_limit`\nargument is applied during upgrades and the mds daemon operates normally. \n(BZ#1951348)\n\n* Previously, the coredumps were not generated in the correct location as\nrook was setting the config option `log_file` to an empty string since\nlogging happened on stdout and not on the files, and hence Ceph read the\nvalue of the `log_file` to build the dump path. With this update, rook does\nnot set the `log_file` and keeps Ceph\u0027s internal default, and hence the\ncoredumps are generated in the correct location and are accessible under\n`/var/log/ceph/`. (BZ#1938049)\n\n* Previously, Ceph became inaccessible, as the mons lose quorum if a mon\npod was drained while another mon was failing over. With this update,\nvoluntary mon drains are prevented while a mon is failing over, and hence\nCeph does not become inaccessible. (BZ#1946573)\n\n* Previously, the mon quorum was at risk, as the operator could erroneously\nremove the new mon if the operator was restarted during a mon failover. \nWith this update, the operator completes the same mon failover after the\noperator is restarted, and hence the mon quorum is more reliable in the\nnode drains and mon failover scenarios. (BZ#1959983)\n\nAll users of Red Hat OpenShift Container Storage are advised to pull these\nnew images from the Red Hat Container Registry. Solution:\n\nBefore applying this update, make sure all previously released errata\nrelevant to your system have been applied. \n\nFor details on how to apply this update, refer to:\n\nhttps://access.redhat.com/articles/11258\n\n4. Bugs fixed (https://bugzilla.redhat.com/):\n\n1938106 - [GSS][RFE]Reduce debug level for logs of Nooba Endpoint pod\n1950915 - XSS Vulnerability with Noobaa version 5.5.0-3bacc6b\n1951348 - [GSS][CephFS] health warning \"MDS cache is too large (3GB/1GB); 0 inodes in use by clients, 0 stray files\" for the standby-replay\n1951600 - [4.6.z][Clone of BZ #1936545] setuid and setgid file bits are not retained after a OCS CephFS CSI restore\n1955601 - CVE-2021-3528 NooBaa: noobaa-operator leaking RPC AuthToken into log files\n1957189 - [Rebase] Use RHCS4.2z1 container image with OCS 4..6.5[may require doc update for external mode min supported RHCS version]\n1959980 - When a node is being drained, increase the mon failover timeout to prevent unnecessary mon failover\n1959983 - [GSS][mon] rook-operator scales mons to 4 after healthCheck timeout\n1962483 - [RHEL7][RBD][4.6.z clone] FailedMount error when using restored PVC on app pod\n\n5. References:\n\nhttps://access.redhat.com/security/cve/CVE-2016-10228\nhttps://access.redhat.com/security/cve/CVE-2017-14502\nhttps://access.redhat.com/security/cve/CVE-2019-2708\nhttps://access.redhat.com/security/cve/CVE-2019-3842\nhttps://access.redhat.com/security/cve/CVE-2019-9169\nhttps://access.redhat.com/security/cve/CVE-2019-13012\nhttps://access.redhat.com/security/cve/CVE-2019-14866\nhttps://access.redhat.com/security/cve/CVE-2019-25013\nhttps://access.redhat.com/security/cve/CVE-2020-8231\nhttps://access.redhat.com/security/cve/CVE-2020-8284\nhttps://access.redhat.com/security/cve/CVE-2020-8285\nhttps://access.redhat.com/security/cve/CVE-2020-8286\nhttps://access.redhat.com/security/cve/CVE-2020-8927\nhttps://access.redhat.com/security/cve/CVE-2020-9948\nhttps://access.redhat.com/security/cve/CVE-2020-9951\nhttps://access.redhat.com/security/cve/CVE-2020-9983\nhttps://access.redhat.com/security/cve/CVE-2020-13434\nhttps://access.redhat.com/security/cve/CVE-2020-13543\nhttps://access.redhat.com/security/cve/CVE-2020-13584\nhttps://access.redhat.com/security/cve/CVE-2020-13776\nhttps://access.redhat.com/security/cve/CVE-2020-15358\nhttps://access.redhat.com/security/cve/CVE-2020-24977\nhttps://access.redhat.com/security/cve/CVE-2020-25659\nhttps://access.redhat.com/security/cve/CVE-2020-25678\nhttps://access.redhat.com/security/cve/CVE-2020-26116\nhttps://access.redhat.com/security/cve/CVE-2020-26137\nhttps://access.redhat.com/security/cve/CVE-2020-27618\nhttps://access.redhat.com/security/cve/CVE-2020-27619\nhttps://access.redhat.com/security/cve/CVE-2020-27783\nhttps://access.redhat.com/security/cve/CVE-2020-28196\nhttps://access.redhat.com/security/cve/CVE-2020-29361\nhttps://access.redhat.com/security/cve/CVE-2020-29362\nhttps://access.redhat.com/security/cve/CVE-2020-29363\nhttps://access.redhat.com/security/cve/CVE-2020-36242\nhttps://access.redhat.com/security/cve/CVE-2021-3139\nhttps://access.redhat.com/security/cve/CVE-2021-3177\nhttps://access.redhat.com/security/cve/CVE-2021-3326\nhttps://access.redhat.com/security/cve/CVE-2021-3449\nhttps://access.redhat.com/security/cve/CVE-2021-3450\nhttps://access.redhat.com/security/cve/CVE-2021-3528\nhttps://access.redhat.com/security/cve/CVE-2021-20305\nhttps://access.redhat.com/security/cve/CVE-2021-23239\nhttps://access.redhat.com/security/cve/CVE-2021-23240\nhttps://access.redhat.com/security/cve/CVE-2021-23336\nhttps://access.redhat.com/security/updates/classification/#moderate\n\n6. Contact:\n\nThe Red Hat security contact is \u003csecalert@redhat.com\u003e. More contact\ndetails at https://access.redhat.com/security/team/contact/\n\nCopyright 2021 Red Hat, Inc. Bugs fixed (https://bugzilla.redhat.com/):\n\n1937901 - CVE-2021-27918 golang: encoding/xml: infinite loop when using xml.NewTokenDecoder with a custom TokenReader\n1958341 - CVE-2021-31525 golang: net/http: panic in ReadRequest and ReadResponse when reading a very large header\n1965503 - CVE-2021-33196 golang: archive/zip: Malformed archive may cause panic or memory exhaustion\n1971445 - Release of OpenShift Serverless Serving 1.16.0\n1971448 - Release of OpenShift Serverless Eventing 1.16.0\n\n5. Bugs fixed (https://bugzilla.redhat.com/):\n\n1918750 - CVE-2021-3114 golang: crypto/elliptic: incorrect operations on the P-224 curve\n1945703 - \"Guest OS Info\" availability in VMI describe is flaky\n1958816 - [2.6.z] KubeMacPool fails to start due to OOM likely caused by a high number of Pods running in the cluster\n1963275 - migration controller null pointer dereference\n1965099 - Live Migration double handoff to virt-handler causes connection failures\n1965181 - CDI importer doesn\u0027t report AwaitingVDDK like it used to\n1967086 - Cloning DataVolumes between namespaces fails while creating cdi-upload pod\n1967887 - [2.6.6] nmstate is not progressing on a node and not configuring vlan filtering that causes an outage for VMs\n1969756 - Windows VMs fail to start on air-gapped environments\n1970372 - Virt-handler fails to verify container-disk\n1973227 - segfault in virt-controller during pdb deletion\n1974084 - 2.6.6 containers\n1975212 - No Virtual Machine Templates Found [EDIT - all templates are marked as depracted]\n1975727 - [Regression][VMIO][Warm] The third precopy does not end in warm migration\n1977756 - [2.6.z] PVC keeps in pending when using hostpath-provisioner\n1982760 - [v2v] no kind VirtualMachine is registered for version \\\"kubevirt.io/v1\\\" i... \n1986989 - OpenShift Virtualization 2.6.z cannot be upgraded to 4.8.0 initially deployed starting with \u003c= 4.8\n\n5. -----BEGIN PGP SIGNED MESSAGE-----\nHash: SHA256\n\nAPPLE-SA-2020-12-14-4 Additional information for\nAPPLE-SA-2020-11-13-1 macOS Big Sur 11.0.1\n\nmacOS Big Sur 11.0.1 addresses the following issues. \nInformation about the security content is also available at\nhttps://support.apple.com/HT211931. \n\nAMD\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: A malicious application may be able to execute arbitrary code\nwith system privileges\nDescription: A memory corruption issue was addressed with improved\ninput validation. \nCVE-2020-27914: Yu Wang of Didi Research America\nCVE-2020-27915: Yu Wang of Didi Research America\nEntry added December 14, 2020\n\nApp Store\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: An application may be able to gain elevated privileges\nDescription: This issue was addressed by removing the vulnerable\ncode. \nCVE-2020-27903: Zhipeng Huo (@R3dF09) of Tencent Security Xuanwu Lab\n\nAudio\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: Processing a maliciously crafted audio file may lead to\narbitrary code execution\nDescription: An out-of-bounds read was addressed with improved input\nvalidation. \nCVE-2020-27910: JunDong Xie and XingWei Lin of Ant Security Light-\nYear Lab\n\nAudio\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: Processing a maliciously crafted audio file may lead to\narbitrary code execution\nDescription: An out-of-bounds write was addressed with improved input\nvalidation. \nCVE-2020-27916: JunDong Xie of Ant Security Light-Year Lab\n\nAudio\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: A malicious application may be able to read restricted memory\nDescription: An out-of-bounds read was addressed with improved bounds\nchecking. \nCVE-2020-9943: JunDong Xie of Ant Group Light-Year Security Lab\n\nAudio\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: An application may be able to read restricted memory\nDescription: An out-of-bounds read was addressed with improved bounds\nchecking. \nCVE-2020-9944: JunDong Xie of Ant Group Light-Year Security Lab\n\nBluetooth\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: A remote attacker may be able to cause unexpected application\ntermination or heap corruption\nDescription: Multiple integer overflows were addressed with improved\ninput validation. \nCVE-2020-27906: Zuozhi Fan (@pattern_F_) of Ant Group Tianqiong\nSecurity Lab\n\nCoreAudio\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: Processing a maliciously crafted audio file may lead to\narbitrary code execution\nDescription: An out-of-bounds read was addressed with improved input\nvalidation. \nCVE-2020-27908: JunDong Xie and XingWei Lin of Ant Security Light-\nYear Lab\nCVE-2020-27909: Anonymous working with Trend Micro Zero Day\nInitiative, JunDong Xie and XingWei Lin of Ant Security Light-Year\nLab\nCVE-2020-9960: JunDong Xie and XingWei Lin of Ant Security Light-Year\nLab\nEntry added December 14, 2020\n\nCoreAudio\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: Processing a maliciously crafted audio file may lead to\narbitrary code execution\nDescription: An out-of-bounds write was addressed with improved input\nvalidation. \nCVE-2020-10017: Francis working with Trend Micro Zero Day Initiative,\nJunDong Xie of Ant Security Light-Year Lab\n\nCoreCapture\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: An application may be able to execute arbitrary code with\nkernel privileges\nDescription: A use after free issue was addressed with improved\nmemory management. \nCVE-2020-9949: Proteas\n\nCoreGraphics\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: Processing a maliciously crafted image may lead to arbitrary\ncode execution\nDescription: An out-of-bounds write was addressed with improved input\nvalidation. \nCVE-2020-9883: an anonymous researcher, Mickey Jin of Trend Micro\n\nCrash Reporter\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: A local attacker may be able to elevate  their privileges\nDescription: An issue existed within the path validation logic for\nsymlinks. This issue was addressed with improved path sanitization. \nCVE-2020-10003: Tim Michaud (@TimGMichaud) of Leviathan\n\nCoreText\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: Processing a maliciously crafted font file may lead to\narbitrary code execution\nDescription: A logic issue was addressed with improved state\nmanagement. \nCVE-2020-27922: Mickey Jin of Trend Micro\nEntry added December 14, 2020\n\nCoreText\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: Processing a maliciously crafted text file may lead to\narbitrary code execution\nDescription: A memory corruption issue was addressed with improved\nstate management. \nCVE-2020-9999: Apple\nEntry updated December 14, 2020\n\nDisk Images\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: An application may be able to execute arbitrary code with\nkernel privileges\nDescription: An out-of-bounds read was addressed with improved input\nvalidation. \nCVE-2020-9965: Proteas\nCVE-2020-9966: Proteas\n\nFinder\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: Users may be unable to remove metadata indicating where files\nwere downloaded from\nDescription: The issue was addressed with additional user controls. \nCVE-2020-27894: Manuel Trezza of Shuggr (shuggr.com)\n\nFontParser\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: Processing a maliciously crafted image may lead to arbitrary\ncode execution\nDescription: A buffer overflow was addressed with improved size\nvalidation. \nCVE-2020-9962: Yi\u011fit Can YILMAZ (@yilmazcanyigit)\nEntry added December 14, 2020\n\nFontParser\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: Processing a maliciously crafted font file may lead to\narbitrary code execution\nDescription: An out-of-bounds write was addressed with improved input\nvalidation. \nCVE-2020-27952: an anonymous researcher, Mickey Jin and Junzhi Lu of\nTrend Micro\nEntry added December 14, 2020\n\nFontParser\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: Processing a maliciously crafted font file may lead to\narbitrary code execution\nDescription: An out-of-bounds read was addressed with improved input\nvalidation. \nCVE-2020-9956: Mickey Jin and Junzhi Lu of Trend Micro Mobile\nSecurity Research Team working with Trend Micro\u2019s Zero Day Initiative\nEntry added December 14, 2020\n\nFontParser\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: Processing a maliciously crafted font file may lead to\narbitrary code execution\nDescription: A memory corruption issue existed in the processing of\nfont files. This issue was addressed with improved input validation. \nCVE-2020-27931: Apple\nEntry added December 14, 2020\n\nFontParser\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: Processing a maliciously crafted font may lead to arbitrary\ncode execution. Apple is aware of reports that an exploit for this\nissue exists in the wild. \nDescription: A memory corruption issue was addressed with improved\ninput validation. \nCVE-2020-27930: Google Project Zero\n\nFontParser\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: Processing a maliciously crafted font file may lead to\narbitrary code execution\nDescription: An out-of-bounds write issue was addressed with improved\nbounds checking. \nCVE-2020-27927: Xingwei Lin of Ant Security Light-Year Lab\n\nFoundation\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: A local user may be able to read arbitrary files\nDescription: A logic issue was addressed with improved state\nmanagement. \nCVE-2020-10002: James Hutchins\n\nHomeKit\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: An attacker in a privileged network position may be able to\nunexpectedly alter application state\nDescription: This issue was addressed with improved setting\npropagation. \nCVE-2020-9978: Luyi Xing, Dongfang Zhao, and Xiaofeng Wang of Indiana\nUniversity Bloomington, Yan Jia of Xidian University and University\nof Chinese Academy of Sciences, and Bin Yuan of HuaZhong University\nof Science and Technology\nEntry added December 14, 2020\n\nImageIO\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: Processing a maliciously crafted image may lead to arbitrary\ncode execution\nDescription: An out-of-bounds write issue was addressed with improved\nbounds checking. \nCVE-2020-9955: Mickey Jin of Trend Micro, Xingwei Lin of Ant Security\nLight-Year Lab\nEntry added December 14, 2020\n\nImageIO\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: Processing a maliciously crafted image may lead to arbitrary\ncode execution\nDescription: An out-of-bounds read was addressed with improved input\nvalidation. \nCVE-2020-27924: Lei Sun\nEntry added December 14, 2020\n\nImageIO\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: Processing a maliciously crafted image may lead to arbitrary\ncode execution\nDescription: An out-of-bounds write was addressed with improved input\nvalidation. \nCVE-2020-27912: Xingwei Lin of Ant Security Light-Year Lab\nCVE-2020-27923: Lei Sun\nEntry updated December 14, 2020\n\nImageIO\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: Opening a maliciously crafted PDF file may lead to an\nunexpected application termination or arbitrary code execution\nDescription: An out-of-bounds write issue was addressed with improved\nbounds checking. \nCVE-2020-9876: Mickey Jin of Trend Micro\n\nIntel Graphics Driver\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: An application may be able to execute arbitrary code with\nkernel privileges\nDescription: An out-of-bounds write issue was addressed with improved\nbounds checking. \nCVE-2020-10015: ABC Research s.r.o. working with Trend Micro Zero Day\nInitiative\nCVE-2020-27897: Xiaolong Bai and Min (Spark) Zheng of Alibaba Inc.,\nand Luyi Xing of Indiana University Bloomington\nEntry added December 14, 2020\n\nIntel Graphics Driver\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: An application may be able to execute arbitrary code with\nkernel privileges\nDescription: A memory corruption issue was addressed with improved\nmemory handling. \nCVE-2020-27907: ABC Research s.r.o. working with Trend Micro Zero Day\nInitiative\nEntry added December 14, 2020\n\nImage Processing\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: Processing a maliciously crafted image may lead to arbitrary\ncode execution\nDescription: An out-of-bounds write was addressed with improved input\nvalidation. \nCVE-2020-27919: Hou JingYi (@hjy79425575) of Qihoo 360 CERT, Xingwei\nLin of Ant Security Light-Year Lab\nEntry added December 14, 2020\n\nKernel\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: A remote attacker may be able to cause unexpected system\ntermination or corrupt kernel memory\nDescription: Multiple memory corruption issues were addressed with\nimproved input validation. \nCVE-2020-9967: Alex Plaskett (@alexjplaskett)\nEntry added December 14, 2020\n\nKernel\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: An application may be able to execute arbitrary code with\nkernel privileges\nDescription: A use after free issue was addressed with improved\nmemory management. \nCVE-2020-9975: Tielei Wang of Pangu Lab\nEntry added December 14, 2020\n\nKernel\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: An application may be able to execute arbitrary code with\nkernel privileges\nDescription: A race condition was addressed with improved state\nhandling. \nCVE-2020-27921: Linus Henze (pinauten.de)\nEntry added December 14, 2020\n\nKernel\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: An application may be able to execute arbitrary code with\nkernel privileges\nDescription: A logic issue existed resulting in memory corruption. \nThis was addressed with improved state management. \nCVE-2020-27904: Zuozhi Fan (@pattern_F_) of Ant Group Tianqong\nSecurity Lab\n\nKernel\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: An attacker in a privileged network position may be able to\ninject into active connections within a VPN tunnel\nDescription: A routing issue was addressed with improved\nrestrictions. \nCVE-2019-14899: William J. Tolley, Beau Kujath, and Jedidiah R. \nCrandall\n\nKernel\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: A malicious application may be able to disclose kernel\nmemory. Apple is aware of reports that an exploit for this issue\nexists in the wild. \nDescription: A memory initialization issue was addressed. \nCVE-2020-27950: Google Project Zero\n\nKernel\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: A malicious application may be able to determine kernel\nmemory layout\nDescription: A logic issue was addressed with improved state\nmanagement. \nCVE-2020-9974: Tommy Muir (@Muirey03)\n\nKernel\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: An application may be able to execute arbitrary code with\nkernel privileges\nDescription: A memory corruption issue was addressed with improved\nstate management. \nCVE-2020-10016: Alex Helie\n\nKernel\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: A malicious application may be able to execute arbitrary code\nwith kernel privileges. Apple is aware of reports that an exploit for\nthis issue exists in the wild. \nDescription: A type confusion issue was addressed with improved state\nhandling. \nCVE-2020-27932: Google Project Zero\n\nlibxml2\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: Processing maliciously crafted web content may lead to code\nexecution\nDescription: A use after free issue was addressed with improved\nmemory management. \nCVE-2020-27917: found by OSS-Fuzz\nCVE-2020-27920: found by OSS-Fuzz\nEntry updated December 14, 2020\n\nlibxml2\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: A remote attacker may be able to cause unexpected application\ntermination or arbitrary code execution\nDescription: An integer overflow was addressed through improved input\nvalidation. \nCVE-2020-27911: found by OSS-Fuzz\n\nlibxpc\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: A malicious application may be able to elevate privileges\nDescription: A logic issue was addressed with improved validation. \nCVE-2020-9971: Zhipeng Huo (@R3dF09) of Tencent Security Xuanwu Lab\nEntry added December 14, 2020\n\nlibxpc\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: A malicious application may be able to break out of its\nsandbox\nDescription: A parsing issue in the handling of directory paths was\naddressed with improved path validation. \nCVE-2020-10014: Zhipeng Huo (@R3dF09) of Tencent Security Xuanwu Lab\n\nLogging\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: A local attacker may be able to elevate their privileges\nDescription: A path handling issue was addressed with improved\nvalidation. \nCVE-2020-10010: Tommy Muir (@Muirey03)\n\nMail\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: A remote attacker may be able to unexpectedly alter\napplication state\nDescription: This issue was addressed with improved checks. \nCVE-2020-9941: Fabian Ising of FH M\u00fcnster University of Applied\nSciences and Damian Poddebniak of FH M\u00fcnster University of Applied\nSciences\n\nMessages\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: A local user may be able to discover a user\u2019s deleted\nmessages\nDescription: The issue was addressed with improved deletion. \nCVE-2020-9988: William Breuer of the Netherlands\nCVE-2020-9989: von Brunn Media\n\nModel I/O\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: Processing a maliciously crafted USD file may lead to\nunexpected application termination or arbitrary code execution\nDescription: An out-of-bounds read was addressed with improved bounds\nchecking. \nCVE-2020-10011: Aleksandar Nikolic of Cisco Talos\nEntry added December 14, 2020\n\nModel I/O\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: Processing a maliciously crafted USD file may lead to\nunexpected application termination or arbitrary code execution\nDescription: An out-of-bounds read was addressed with improved input\nvalidation. \nCVE-2020-13524: Aleksandar Nikolic of Cisco Talos\n\nModel I/O\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: Opening a maliciously crafted file may lead to unexpected\napplication termination or arbitrary code execution\nDescription: A logic issue was addressed with improved state\nmanagement. \nCVE-2020-10004: Aleksandar Nikolic of Cisco Talos\n\nNetworkExtension\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: A malicious application may be able to elevate privileges\nDescription: A use after free issue was addressed with improved\nmemory management. \nCVE-2020-9996: Zhiwei Yuan of Trend Micro iCore Team, Junzhi Lu and\nMickey Jin of Trend Micro\n\nNSRemoteView\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: A sandboxed process may be able to circumvent sandbox\nrestrictions\nDescription: A logic issue was addressed with improved restrictions. \nCVE-2020-27901: Thijs Alkemade of Computest Research Division\nEntry added December 14, 2020\n\nNSRemoteView\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: A malicious application may be able to preview files it does\nnot have access to\nDescription: An issue existed in the handling of snapshots. The issue\nwas resolved with improved permissions logic. \nCVE-2020-27900: Thijs Alkemade of Computest Research Division\n\nPCRE\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: Multiple issues in pcre\nDescription: Multiple issues were addressed by updating to version\n8.44. \nCVE-2019-20838\nCVE-2020-14155\n\nPower Management\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: A malicious application may be able to determine kernel\nmemory layout\nDescription: A logic issue was addressed with improved state\nmanagement. \nCVE-2020-10007: singi@theori working with Trend Micro Zero Day\nInitiative\n\npython\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: Cookies belonging to one origin may be sent to another origin\nDescription: Multiple issues were addressed with improved logic. \nCVE-2020-27896: an anonymous researcher\n\nQuick Look\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: A malicious app may be able to determine the existence of\nfiles on the computer\nDescription: The issue was addressed with improved handling of icon\ncaches. \nCVE-2020-9963: Csaba Fitzl (@theevilbit) of Offensive Security\n\nQuick Look\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: Processing a maliciously crafted document may lead to a cross\nsite scripting attack\nDescription: An access issue was addressed with improved access\nrestrictions. \nCVE-2020-10012: Heige of KnownSec 404 Team\n(https://www.knownsec.com/) and Bo Qu of Palo Alto Networks\n(https://www.paloaltonetworks.com/)\n\nRuby\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: A remote attacker may be able to modify the file system\nDescription: A path handling issue was addressed with improved\nvalidation. \nCVE-2020-27896: an anonymous researcher\n\nRuby\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: When parsing certain JSON documents, the json gem can be\ncoerced into creating arbitrary objects in the target system\nDescription: This issue was addressed with improved checks. \nCVE-2020-10663: Jeremy Evans\n\nSafari\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: Visiting a malicious website may lead to address bar spoofing\nDescription: A spoofing issue existed in the handling of URLs. This\nissue was addressed with improved input validation. \nCVE-2020-9945: Narendra Bhati From Suma Soft Pvt. Ltd. Pune (India)\n@imnarendrabhati\n\nSafari\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: A malicious application may be able to determine a user\u0027s\nopen tabs in Safari\nDescription: A validation issue existed in the entitlement\nverification. This issue was addressed with improved validation of\nthe process entitlement. \nCVE-2020-9977: Josh Parnham (@joshparnham)\n\nSafari\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: Visiting a malicious website may lead to address bar spoofing\nDescription: An inconsistent user interface issue was addressed with\nimproved state management. \nCVE-2020-9942: an anonymous researcher, Rahul d Kankrale\n(servicenger.com), Rayyan Bijoora (@Bijoora) of The City School, PAF\nChapter, Ruilin Yang of Tencent Security Xuanwu Lab, YoKo Kho\n(@YoKoAcc) of PT Telekomunikasi Indonesia (Persero) Tbk, Zhiyang\nZeng(@Wester) of OPPO ZIWU Security Lab\n\nSandbox\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: A local user may be able to view senstive user information\nDescription: An access issue was addressed with additional sandbox\nrestrictions. \nCVE-2020-9969: Wojciech Regu\u0142a of SecuRing (wojciechregula.blog)\n\nSQLite\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: A remote attacker may be able to cause a denial of service\nDescription: This issue was addressed with improved checks. \nCVE-2020-9991\n\nSQLite\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: A remote attacker may be able to leak memory\nDescription: An information disclosure issue was addressed with\nimproved state management. \nCVE-2020-9849\n\nSQLite\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: Multiple issues in SQLite\nDescription: Multiple issues were addressed by updating SQLite to\nversion 3.32.3. \nCVE-2020-15358\n\nSQLite\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: A maliciously crafted SQL query may lead to data corruption\nDescription: This issue was addressed with improved checks. \nCVE-2020-13631\n\nSQLite\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: A remote attacker may be able to cause a denial of service\nDescription: This issue was addressed with improved checks. \nCVE-2020-13434\nCVE-2020-13435\nCVE-2020-9991\n\nSQLite\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: A remote attacker may be able to cause arbitrary code\nexecution\nDescription: A memory corruption issue was addressed with improved\nstate management. \nCVE-2020-13630\n\nSymptom Framework\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: A local attacker may be able to elevate their privileges\nDescription: A use after free issue was addressed with improved\nmemory management. \nCVE-2020-27899: 08Tc3wBB working with ZecOps\nEntry added December 14, 2020\n\nSystem Preferences\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: A sandboxed process may be able to circumvent sandbox\nrestrictions\nDescription: A logic issue was addressed with improved state\nmanagement. \nCVE-2020-10009: Thijs Alkemade of Computest Research Division\n\nTCC\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: A malicious application with root privileges may be able to\naccess private information\nDescription: A logic issue was addressed with improved restrictions. \nCVE-2020-10008: Wojciech Regu\u0142a of SecuRing (wojciechregula.blog)\nEntry added December 14, 2020\n\nWebKit\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: Processing maliciously crafted web content may lead to\narbitrary code execution\nDescription: A use after free issue was addressed with improved\nmemory management. \nCVE-2020-27918: Liu Long of Ant Security Light-Year Lab\nEntry updated December 14, 2020\n\nWi-Fi\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: An attacker may be able to bypass Managed Frame Protection\nDescription: A denial of service issue was addressed with improved\nstate handling. \nCVE-2020-27898: Stephan Marais of University of Johannesburg\n\nXsan\nAvailable for: Mac Pro (2013 and later), MacBook Air (2013 and\nlater), MacBook Pro (Late 2013 and later), Mac mini (2014 and later),\niMac (2014 and later), MacBook (2015 and later), iMac Pro (all\nmodels)\nImpact: A malicious application may be able to access restricted\nfiles\nDescription: This issue was addressed with improved entitlements. \nCVE-2020-10006: Wojciech Regu\u0142a (@_r3ggi) of SecuRing\n\nAdditional recognition\n\n802.1X\nWe would like to acknowledge Kenana Dalle of Hamad bin Khalifa\nUniversity and Ryan Riley of Carnegie Mellon University in Qatar for\ntheir assistance. \nEntry added December 14, 2020\n\nAudio\nWe would like to acknowledge JunDong Xie and XingWei Lin of Ant-\nfinancial Light-Year Security Lab, an anonymous researcher for their\nassistance. \n\nBluetooth\nWe would like to acknowledge Andy Davis of NCC Group, Dennis Heinze\n(@ttdennis) of TU Darmstadt, Secure Mobile Networking Lab for their\nassistance. \nEntry updated December 14, 2020\n\nClang\nWe would like to acknowledge Brandon Azad of Google Project Zero for\ntheir assistance. \n\nCore Location\nWe would like to acknowledge Yi\u011fit Can YILMAZ (@yilmazcanyigit) for\ntheir assistance. \n\nCrash Reporter\nWe would like to acknowledge Artur Byszko of AFINE for their\nassistance. \nEntry added December 14, 2020\n\nDirectory Utility\nWe would like to acknowledge Wojciech Regu\u0142a (@_r3ggi) of SecuRing\nfor their assistance. \n\niAP\nWe would like to acknowledge Andy Davis of NCC Group for their\nassistance. \n\nKernel\nWe would like to acknowledge Brandon Azad of Google Project Zero,\nStephen R\u00f6ttger of Google for their assistance. \n\nlibxml2\nWe would like to acknowledge an anonymous researcher for their\nassistance. \nEntry added December 14, 2020\n\nLogin Window\nWe would like to acknowledge Rob Morton of Leidos for their\nassistance. \n\nPhotos Storage\nWe would like to acknowledge Paulos Yibelo of LimeHats for their\nassistance. \n\nQuick Look\nWe would like to acknowledge Csaba Fitzl (@theevilbit) and Wojciech\nRegu\u0142a of SecuRing (wojciechregula.blog) for their assistance. \n\nSafari\nWe would like to acknowledge Gabriel Corona and Narendra Bhati From\nSuma Soft Pvt. Ltd. Pune (India) @imnarendrabhati for their\nassistance. \n\nSecurity\nWe would like to acknowledge Christian Starkjohann of Objective\nDevelopment Software GmbH for their assistance. \n\nSystem Preferences\nWe would like to acknowledge Csaba Fitzl (@theevilbit) of Offensive\nSecurity for their assistance. \n\nThis message is signed with Apple\u0027s Product Security PGP key,\nand details are available at:\nhttps://www.apple.com/support/security/pgp/\n-----BEGIN PGP SIGNATURE-----\n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\nAXZYC9Y9bBRZfYQAv7nxa+uIXy2rGTuQKQY8ldu4eEHtJ0OhaB8=\n=T5Y8\n-----END PGP SIGNATURE-----\n\n\n. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -\nGentoo Linux Security Advisory                           GLSA 202007-26\n- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -\n                                           https://security.gentoo.org/\n- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -\n\n Severity: Normal\n    Title: SQLite: Multiple vulnerabilities\n     Date: July 27, 2020\n     Bugs: #716748\n       ID: 202007-26\n\n- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -\n\nSynopsis\n=======\nMultiple vulnerabilities have been found in SQLite, the worst of which\ncould result in the arbitrary execution of code. \n\nAffected packages\n================\n    -------------------------------------------------------------------\n     Package              /     Vulnerable     /            Unaffected\n    -------------------------------------------------------------------\n  1  dev-db/sqlite                \u003c 3.32.3                  \u003e= 3.32.3\n\nDescription\n==========\nMultiple vulnerabilities have been discovered in SQLite. Please review\nthe CVE identifiers referenced below for details. \n\nImpact\n=====\nPlease review the referenced CVE identifiers for details. \n\nWorkaround\n=========\nThere is no known workaround at this time. \n\nResolution\n=========\nAll SQLite users should upgrade to the latest version:\n\n  # emerge --sync\n  # emerge --ask --oneshot --verbose \"\u003e\\xdev-db/sqlite-3.32.3\"\n\nReferences\n=========\n[  1 ] CVE-2019-20218\n       https://nvd.nist.gov/vuln/detail/CVE-2019-20218\n[  2 ] CVE-2020-11655\n       https://nvd.nist.gov/vuln/detail/CVE-2020-11655\n[  3 ] CVE-2020-11656\n       https://nvd.nist.gov/vuln/detail/CVE-2020-11656\n[  4 ] CVE-2020-13434\n       https://nvd.nist.gov/vuln/detail/CVE-2020-13434\n[  5 ] CVE-2020-13435\n       https://nvd.nist.gov/vuln/detail/CVE-2020-13435\n[  6 ] CVE-2020-13630\n       https://nvd.nist.gov/vuln/detail/CVE-2020-13630\n[  7 ] CVE-2020-13631\n       https://nvd.nist.gov/vuln/detail/CVE-2020-13631\n[  8 ] CVE-2020-13632\n       https://nvd.nist.gov/vuln/detail/CVE-2020-13632\n[  9 ] CVE-2020-13871\n       https://nvd.nist.gov/vuln/detail/CVE-2020-13871\n[ 10 ] CVE-2020-15358\n       https://nvd.nist.gov/vuln/detail/CVE-2020-15358\n\nAvailability\n===========\nThis GLSA and any updates to it are available for viewing at\nthe Gentoo Security Website:\n\n https://security.gentoo.org/glsa/202007-26\n\nConcerns?\n========\nSecurity is a primary focus of Gentoo Linux and ensuring the\nconfidentiality and security of our users\u0027 machines is of utmost\nimportance to us. Any security concerns should be addressed to\nsecurity@gentoo.org or alternatively, you may file a bug at\nhttps://bugs.gentoo.org. \n\nLicense\n======\nCopyright 2020 Gentoo Foundation, Inc; referenced text\nbelongs to its owner(s). \n\nThe contents of this document are licensed under the\nCreative Commons - Attribution / Share Alike license. \n\nhttps://creativecommons.org/licenses/by-sa/2.5\n",
    "sources": [
      {
        "db": "NVD",
        "id": "CVE-2020-13434"
      },
      {
        "db": "VULHUB",
        "id": "VHN-166212"
      },
      {
        "db": "VULMON",
        "id": "CVE-2020-13434"
      },
      {
        "db": "PACKETSTORM",
        "id": "162628"
      },
      {
        "db": "PACKETSTORM",
        "id": "163209"
      },
      {
        "db": "PACKETSTORM",
        "id": "163496"
      },
      {
        "db": "PACKETSTORM",
        "id": "163789"
      },
      {
        "db": "PACKETSTORM",
        "id": "160545"
      },
      {
        "db": "PACKETSTORM",
        "id": "158592"
      }
    ],
    "trust": 1.62
  },
  "exploit_availability": {
    "@context": {
      "@vocab": "https://www.variotdbs.pl/ref/exploit_availability#",
      "data": {
        "@container": "@list"
      },
      "sources": {
        "@container": "@list",
        "@context": {
          "@vocab": "https://www.variotdbs.pl/ref/sources#"
        }
      }
    },
    "data": [
      {
        "reference": "https://www.scap.org.cn/vuln/vhn-166212",
        "trust": 0.1,
        "type": "unknown"
      }
    ],
    "sources": [
      {
        "db": "VULHUB",
        "id": "VHN-166212"
      }
    ]
  },
  "external_ids": {
    "@context": {
      "@vocab": "https://www.variotdbs.pl/ref/external_ids#",
      "data": {
        "@container": "@list"
      },
      "sources": {
        "@container": "@list",
        "@context": {
          "@vocab": "https://www.variotdbs.pl/ref/sources#"
        }
      }
    },
    "data": [
      {
        "db": "NVD",
        "id": "CVE-2020-13434",
        "trust": 2.4
      },
      {
        "db": "PACKETSTORM",
        "id": "160545",
        "trust": 0.8
      },
      {
        "db": "PACKETSTORM",
        "id": "162628",
        "trust": 0.8
      },
      {
        "db": "PACKETSTORM",
        "id": "163496",
        "trust": 0.8
      },
      {
        "db": "PACKETSTORM",
        "id": "158592",
        "trust": 0.8
      },
      {
        "db": "PACKETSTORM",
        "id": "163276",
        "trust": 0.7
      },
      {
        "db": "PACKETSTORM",
        "id": "163267",
        "trust": 0.7
      },
      {
        "db": "PACKETSTORM",
        "id": "162837",
        "trust": 0.7
      },
      {
        "db": "PACKETSTORM",
        "id": "160061",
        "trust": 0.7
      },
      {
        "db": "CNNVD",
        "id": "CNNVD-202005-1159",
        "trust": 0.7
      },
      {
        "db": "PACKETSTORM",
        "id": "163789",
        "trust": 0.7
      },
      {
        "db": "AUSCERT",
        "id": "ESB-2020.3181.2",
        "trust": 0.6
      },
      {
        "db": "AUSCERT",
        "id": "ESB-2021.2412",
        "trust": 0.6
      },
      {
        "db": "AUSCERT",
        "id": "ESB-2023.3732",
        "trust": 0.6
      },
      {
        "db": "AUSCERT",
        "id": "ESB-2022.1025",
        "trust": 0.6
      },
      {
        "db": "AUSCERT",
        "id": "ESB-2020.1865",
        "trust": 0.6
      },
      {
        "db": "AUSCERT",
        "id": "ESB-2021.2515",
        "trust": 0.6
      },
      {
        "db": "AUSCERT",
        "id": "ESB-2021.3141",
        "trust": 0.6
      },
      {
        "db": "AUSCERT",
        "id": "ESB-2021.2711",
        "trust": 0.6
      },
      {
        "db": "AUSCERT",
        "id": "ESB-2021.1820",
        "trust": 0.6
      },
      {
        "db": "AUSCERT",
        "id": "ESB-2021.1866",
        "trust": 0.6
      },
      {
        "db": "AUSCERT",
        "id": "ESB-2021.2657",
        "trust": 0.6
      },
      {
        "db": "AUSCERT",
        "id": "ESB-2020.2019",
        "trust": 0.6
      },
      {
        "db": "AUSCERT",
        "id": "ESB-2021.2228",
        "trust": 0.6
      },
      {
        "db": "AUSCERT",
        "id": "ESB-2020.4060.2",
        "trust": 0.6
      },
      {
        "db": "AUSCERT",
        "id": "ESB-2021.1679",
        "trust": 0.6
      },
      {
        "db": "AUSCERT",
        "id": "ESB-2021.2365",
        "trust": 0.6
      },
      {
        "db": "AUSCERT",
        "id": "ESB-2021.3221",
        "trust": 0.6
      },
      {
        "db": "AUSCERT",
        "id": "ESB-2021.4058",
        "trust": 0.6
      },
      {
        "db": "AUSCERT",
        "id": "ESB-2021.2180",
        "trust": 0.6
      },
      {
        "db": "PACKETSTORM",
        "id": "164192",
        "trust": 0.6
      },
      {
        "db": "PACKETSTORM",
        "id": "158024",
        "trust": 0.6
      },
      {
        "db": "PACKETSTORM",
        "id": "163747",
        "trust": 0.6
      },
      {
        "db": "NSFOCUS",
        "id": "48073",
        "trust": 0.6
      },
      {
        "db": "CS-HELP",
        "id": "SB2022011038",
        "trust": 0.6
      },
      {
        "db": "CS-HELP",
        "id": "SB2021072292",
        "trust": 0.6
      },
      {
        "db": "CS-HELP",
        "id": "SB2021062315",
        "trust": 0.6
      },
      {
        "db": "CS-HELP",
        "id": "SB2021071516",
        "trust": 0.6
      },
      {
        "db": "CS-HELP",
        "id": "SB2022071831",
        "trust": 0.6
      },
      {
        "db": "CS-HELP",
        "id": "SB2022042257",
        "trust": 0.6
      },
      {
        "db": "CS-HELP",
        "id": "SB2021052017",
        "trust": 0.6
      },
      {
        "db": "CS-HELP",
        "id": "SB2021092220",
        "trust": 0.6
      },
      {
        "db": "CS-HELP",
        "id": "SB2021052221",
        "trust": 0.6
      },
      {
        "db": "CS-HELP",
        "id": "SB2021062703",
        "trust": 0.6
      },
      {
        "db": "CS-HELP",
        "id": "SB2022060618",
        "trust": 0.6
      },
      {
        "db": "LENOVO",
        "id": "LEN-60182",
        "trust": 0.6
      },
      {
        "db": "PACKETSTORM",
        "id": "163209",
        "trust": 0.2
      },
      {
        "db": "PACKETSTORM",
        "id": "162659",
        "trust": 0.1
      },
      {
        "db": "PACKETSTORM",
        "id": "163257",
        "trust": 0.1
      },
      {
        "db": "PACKETSTORM",
        "id": "160062",
        "trust": 0.1
      },
      {
        "db": "PACKETSTORM",
        "id": "160064",
        "trust": 0.1
      },
      {
        "db": "PACKETSTORM",
        "id": "163188",
        "trust": 0.1
      },
      {
        "db": "VULHUB",
        "id": "VHN-166212",
        "trust": 0.1
      },
      {
        "db": "VULMON",
        "id": "CVE-2020-13434",
        "trust": 0.1
      }
    ],
    "sources": [
      {
        "db": "VULHUB",
        "id": "VHN-166212"
      },
      {
        "db": "VULMON",
        "id": "CVE-2020-13434"
      },
      {
        "db": "PACKETSTORM",
        "id": "162628"
      },
      {
        "db": "PACKETSTORM",
        "id": "163209"
      },
      {
        "db": "PACKETSTORM",
        "id": "163496"
      },
      {
        "db": "PACKETSTORM",
        "id": "163789"
      },
      {
        "db": "PACKETSTORM",
        "id": "160545"
      },
      {
        "db": "PACKETSTORM",
        "id": "158592"
      },
      {
        "db": "CNNVD",
        "id": "CNNVD-202005-1159"
      },
      {
        "db": "NVD",
        "id": "CVE-2020-13434"
      }
    ]
  },
  "id": "VAR-202005-0473",
  "iot": {
    "@context": {
      "@vocab": "https://www.variotdbs.pl/ref/iot#",
      "sources": {
        "@container": "@list",
        "@context": {
          "@vocab": "https://www.variotdbs.pl/ref/sources#"
        }
      }
    },
    "data": true,
    "sources": [
      {
        "db": "VULHUB",
        "id": "VHN-166212"
      }
    ],
    "trust": 0.01
  },
  "last_update_date": "2024-07-23T19:25:54.896000Z",
  "patch": {
    "@context": {
      "@vocab": "https://www.variotdbs.pl/ref/patch#",
      "data": {
        "@container": "@list"
      },
      "sources": {
        "@container": "@list",
        "@context": {
          "@vocab": "https://www.variotdbs.pl/ref/sources#"
        }
      }
    },
    "data": [
      {
        "title": "SQLite Enter the fix for the verification error vulnerability",
        "trust": 0.6,
        "url": "http://123.124.177.30/web/xxk/bdxqbyid.tag?id=121483"
      },
      {
        "title": "Ubuntu Security Notice: sqlite3 vulnerabilities",
        "trust": 0.1,
        "url": "https://vulmon.com/vendoradvisory?qidtp=ubuntu_security_notice\u0026qid=usn-4394-1"
      },
      {
        "title": "Red Hat: Important: Service Telemetry Framework 1.4 security update",
        "trust": 0.1,
        "url": "https://vulmon.com/vendoradvisory?qidtp=red_hat_security_advisories\u0026qid=rhsa-20225924 - security advisory"
      },
      {
        "title": "Red Hat: Moderate: OpenShift Container Platform 4.10.3 security update",
        "trust": 0.1,
        "url": "https://vulmon.com/vendoradvisory?qidtp=red_hat_security_advisories\u0026qid=rhsa-20220056 - security advisory"
      },
      {
        "title": "Siemens Security Advisories: Siemens Security Advisory",
        "trust": 0.1,
        "url": "https://vulmon.com/vendoradvisory?qidtp=siemens_security_advisories\u0026qid=ec6577109e640dac19a6ddb978afe82d"
      },
      {
        "title": "snykout",
        "trust": 0.1,
        "url": "https://github.com/garethr/snykout "
      }
    ],
    "sources": [
      {
        "db": "VULMON",
        "id": "CVE-2020-13434"
      },
      {
        "db": "CNNVD",
        "id": "CNNVD-202005-1159"
      }
    ]
  },
  "problemtype_data": {
    "@context": {
      "@vocab": "https://www.variotdbs.pl/ref/problemtype_data#",
      "sources": {
        "@container": "@list",
        "@context": {
          "@vocab": "https://www.variotdbs.pl/ref/sources#"
        }
      }
    },
    "data": [
      {
        "problemtype": "CWE-190",
        "trust": 1.1
      }
    ],
    "sources": [
      {
        "db": "VULHUB",
        "id": "VHN-166212"
      },
      {
        "db": "NVD",
        "id": "CVE-2020-13434"
      }
    ]
  },
  "references": {
    "@context": {
      "@vocab": "https://www.variotdbs.pl/ref/references#",
      "data": {
        "@container": "@list"
      },
      "sources": {
        "@container": "@list",
        "@context": {
          "@vocab": "https://www.variotdbs.pl/ref/sources#"
        }
      }
    },
    "data": [
      {
        "trust": 2.4,
        "url": "https://www.oracle.com/security-alerts/cpuapr2022.html"
      },
      {
        "trust": 1.9,
        "url": "https://security.gentoo.org/glsa/202007-26"
      },
      {
        "trust": 1.9,
        "url": "https://usn.ubuntu.com/4394-1/"
      },
      {
        "trust": 1.8,
        "url": "https://security.netapp.com/advisory/ntap-20200528-0004/"
      },
      {
        "trust": 1.8,
        "url": "https://support.apple.com/kb/ht211843"
      },
      {
        "trust": 1.8,
        "url": "https://support.apple.com/kb/ht211844"
      },
      {
        "trust": 1.8,
        "url": "https://support.apple.com/kb/ht211850"
      },
      {
        "trust": 1.8,
        "url": "https://support.apple.com/kb/ht211931"
      },
      {
        "trust": 1.8,
        "url": "https://support.apple.com/kb/ht211935"
      },
      {
        "trust": 1.8,
        "url": "https://support.apple.com/kb/ht211952"
      },
      {
        "trust": 1.8,
        "url": "https://security.freebsd.org/advisories/freebsd-sa-20:22.sqlite.asc"
      },
      {
        "trust": 1.8,
        "url": "http://seclists.org/fulldisclosure/2020/nov/20"
      },
      {
        "trust": 1.8,
        "url": "http://seclists.org/fulldisclosure/2020/nov/19"
      },
      {
        "trust": 1.8,
        "url": "http://seclists.org/fulldisclosure/2020/nov/22"
      },
      {
        "trust": 1.8,
        "url": "http://seclists.org/fulldisclosure/2020/dec/32"
      },
      {
        "trust": 1.8,
        "url": "https://www.oracle.com/security-alerts/cpuapr2021.html"
      },
      {
        "trust": 1.8,
        "url": "https://www.oracle.com/security-alerts/cpujul2020.html"
      },
      {
        "trust": 1.8,
        "url": "https://www.sqlite.org/src/info/23439ea582241138"
      },
      {
        "trust": 1.8,
        "url": "https://www.sqlite.org/src/info/d08d3405878d394e"
      },
      {
        "trust": 1.8,
        "url": "https://lists.debian.org/debian-lts-announce/2020/05/msg00024.html"
      },
      {
        "trust": 1.8,
        "url": "https://lists.debian.org/debian-lts-announce/2020/08/msg00037.html"
      },
      {
        "trust": 1.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-13434"
      },
      {
        "trust": 1.1,
        "url": "https://lists.fedoraproject.org/archives/list/package-announce%40lists.fedoraproject.org/message/l7kxqwhiy2mqp4lnm6odwjenmxyyqybn/"
      },
      {
        "trust": 1.0,
        "url": "https://access.redhat.com/security/cve/cve-2020-13434"
      },
      {
        "trust": 0.7,
        "url": "https://lists.fedoraproject.org/archives/list/package-announce@lists.fedoraproject.org/message/l7kxqwhiy2mqp4lnm6odwjenmxyyqybn/"
      },
      {
        "trust": 0.6,
        "url": "https://packetstormsecurity.com/files/164192/red-hat-security-advisory-2021-3556-01.html"
      },
      {
        "trust": 0.6,
        "url": "https://packetstormsecurity.com/files/163789/red-hat-security-advisory-2021-3119-01.html"
      },
      {
        "trust": 0.6,
        "url": "https://www.cybersecurity-help.cz/vdb/sb2021052017"
      },
      {
        "trust": 0.6,
        "url": "https://www.auscert.org.au/bulletins/esb-2021.2657"
      },
      {
        "trust": 0.6,
        "url": "https://www.ibm.com/blogs/psirt/security-bulletin-wml-ce-sqlite-through-3-32-0-has-an-integer-overflow-in-sqlite3_str_vappendf-in-printf-c/"
      },
      {
        "trust": 0.6,
        "url": "https://packetstormsecurity.com/files/163747/red-hat-security-advisory-2021-3016-01.html"
      },
      {
        "trust": 0.6,
        "url": "https://www.auscert.org.au/bulletins/esb-2021.2180"
      },
      {
        "trust": 0.6,
        "url": "https://www.auscert.org.au/bulletins/esb-2020.1865/"
      },
      {
        "trust": 0.6,
        "url": "https://www.cybersecurity-help.cz/vdb/sb2021072292"
      },
      {
        "trust": 0.6,
        "url": "https://www.cybersecurity-help.cz/vdb/sb2022042257"
      },
      {
        "trust": 0.6,
        "url": "https://www.auscert.org.au/bulletins/esb-2021.2228"
      },
      {
        "trust": 0.6,
        "url": "https://www.cybersecurity-help.cz/vdb/sb2022060618"
      },
      {
        "trust": 0.6,
        "url": "https://packetstormsecurity.com/files/158024/ubuntu-security-notice-usn-4394-1.html"
      },
      {
        "trust": 0.6,
        "url": "https://www.cybersecurity-help.cz/vdb/sb2021052221"
      },
      {
        "trust": 0.6,
        "url": "https://www.ibm.com/support/pages/node/6520474"
      },
      {
        "trust": 0.6,
        "url": "https://packetstormsecurity.com/files/160545/apple-security-advisory-2020-12-14-4.html"
      },
      {
        "trust": 0.6,
        "url": "https://www.cybersecurity-help.cz/vdb/sb2021071516"
      },
      {
        "trust": 0.6,
        "url": "https://www.auscert.org.au/bulletins/esb-2021.4058"
      },
      {
        "trust": 0.6,
        "url": "https://vigilance.fr/vulnerability/sqlite-integer-overflow-via-sqlite3-str-vappendf-32337"
      },
      {
        "trust": 0.6,
        "url": "https://packetstormsecurity.com/files/162628/red-hat-security-advisory-2021-1581-01.html"
      },
      {
        "trust": 0.6,
        "url": "https://www.ibm.com/blogs/psirt/security-bulletin-ibm-data-risk-manager-is-affected-by-multiple-vulnerabilities-3/"
      },
      {
        "trust": 0.6,
        "url": "https://support.lenovo.com/us/en/product_security/len-60182"
      },
      {
        "trust": 0.6,
        "url": "https://www.ibm.com/blogs/psirt/security-bulletin-a-vulnerability-was-identified-and-remediated-in-the-ibm-maas360-cloud-extender-cve-2020-13434-cve-2020-13435/"
      },
      {
        "trust": 0.6,
        "url": "https://www.auscert.org.au/bulletins/esb-2021.1866"
      },
      {
        "trust": 0.6,
        "url": "https://www.auscert.org.au/bulletins/esb-2021.2515"
      },
      {
        "trust": 0.6,
        "url": "https://www.auscert.org.au/bulletins/esb-2021.1820"
      },
      {
        "trust": 0.6,
        "url": "https://www.auscert.org.au/bulletins/esb-2021.2711"
      },
      {
        "trust": 0.6,
        "url": "https://support.apple.com/en-us/ht211844"
      },
      {
        "trust": 0.6,
        "url": "https://www.auscert.org.au/bulletins/esb-2020.2019/"
      },
      {
        "trust": 0.6,
        "url": "https://www.auscert.org.au/bulletins/esb-2021.2365"
      },
      {
        "trust": 0.6,
        "url": "https://www.auscert.org.au/bulletins/esb-2020.4060.2/"
      },
      {
        "trust": 0.6,
        "url": "https://www.cybersecurity-help.cz/vdb/sb2022071831"
      },
      {
        "trust": 0.6,
        "url": "https://packetstormsecurity.com/files/163276/red-hat-security-advisory-2021-2543-01.html"
      },
      {
        "trust": 0.6,
        "url": "https://support.apple.com/en-us/ht211935"
      },
      {
        "trust": 0.6,
        "url": "https://www.auscert.org.au/bulletins/esb-2022.1025"
      },
      {
        "trust": 0.6,
        "url": "https://packetstormsecurity.com/files/163496/red-hat-security-advisory-2021-2705-01.html"
      },
      {
        "trust": 0.6,
        "url": "https://www.auscert.org.au/bulletins/esb-2021.1679"
      },
      {
        "trust": 0.6,
        "url": "https://www.auscert.org.au/bulletins/esb-2023.3732"
      },
      {
        "trust": 0.6,
        "url": "https://www.cybersecurity-help.cz/vdb/sb2021062703"
      },
      {
        "trust": 0.6,
        "url": "https://www.cybersecurity-help.cz/vdb/sb2021092220"
      },
      {
        "trust": 0.6,
        "url": "https://packetstormsecurity.com/files/162837/red-hat-security-advisory-2021-2136-01.html"
      },
      {
        "trust": 0.6,
        "url": "https://packetstormsecurity.com/files/163267/red-hat-security-advisory-2021-2532-01.html"
      },
      {
        "trust": 0.6,
        "url": "https://www.auscert.org.au/bulletins/esb-2021.3221"
      },
      {
        "trust": 0.6,
        "url": "https://www.cybersecurity-help.cz/vdb/sb2022011038"
      },
      {
        "trust": 0.6,
        "url": "https://packetstormsecurity.com/files/158592/gentoo-linux-security-advisory-202007-26.html"
      },
      {
        "trust": 0.6,
        "url": "https://www.auscert.org.au/bulletins/esb-2021.2412"
      },
      {
        "trust": 0.6,
        "url": "http://www.nsfocus.net/vulndb/48073"
      },
      {
        "trust": 0.6,
        "url": "https://packetstormsecurity.com/files/160061/apple-security-advisory-2020-11-13-3.html"
      },
      {
        "trust": 0.6,
        "url": "https://www.cybersecurity-help.cz/vdb/sb2021062315"
      },
      {
        "trust": 0.6,
        "url": "https://www.auscert.org.au/bulletins/esb-2020.3181.2/"
      },
      {
        "trust": 0.6,
        "url": "https://www.auscert.org.au/bulletins/esb-2021.3141"
      },
      {
        "trust": 0.5,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-15358"
      },
      {
        "trust": 0.4,
        "url": "https://listman.redhat.com/mailman/listinfo/rhsa-announce"
      },
      {
        "trust": 0.4,
        "url": "https://access.redhat.com/security/updates/classification/#moderate"
      },
      {
        "trust": 0.4,
        "url": "https://access.redhat.com/security/cve/cve-2020-15358"
      },
      {
        "trust": 0.4,
        "url": "https://bugzilla.redhat.com/):"
      },
      {
        "trust": 0.4,
        "url": "https://access.redhat.com/security/team/contact/"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/articles/11258"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2020-8286"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2020-28196"
      },
      {
        "trust": 0.3,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2017-14502"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2020-8231"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2020-29362"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2017-14502"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2020-8285"
      },
      {
        "trust": 0.3,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2016-10228"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2019-9169"
      },
      {
        "trust": 0.3,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-25013"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2020-29361"
      },
      {
        "trust": 0.3,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-9169"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2021-3326"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2019-25013"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2019-2708"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2020-8927"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2020-29363"
      },
      {
        "trust": 0.3,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-2708"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2016-10228"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2020-8284"
      },
      {
        "trust": 0.3,
        "url": "https://access.redhat.com/security/cve/cve-2020-27618"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2021-23240"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-27618"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2020-13543"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2020-9951"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2021-23239"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-13776"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2020-36242"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2019-3842"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2020-13776"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2020-24977"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-8231"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-24977"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2020-9948"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2019-13012"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2019-14866"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2020-26116"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-14866"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2020-13584"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2020-26137"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-13543"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-13584"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-28196"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2020-25659"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2020-27619"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2020-9983"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2021-3177"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-29362"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2021-23336"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-3842"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-13012"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-29363"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-29361"
      },
      {
        "trust": 0.2,
        "url": "https://access.redhat.com/security/cve/cve-2021-27219"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-13435"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-13631"
      },
      {
        "trust": 0.2,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-13630"
      },
      {
        "trust": 0.1,
        "url": "https://cwe.mitre.org/data/definitions/190.html"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/8/html/8.4_release_notes/"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/team/key/"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/errata/rhsa-2021:1581"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-26116"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/errata/rhsa-2021:2479"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2021-20305"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2021-3139"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-26137"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-27619"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-25659"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-36242"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2021-3449"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-27783"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-27783"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2021-3528"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2021-3450"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-25678"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-25678"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-8284"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2021-27219"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2021-27918"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/documentation/en-us/openshift_container_platform/"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-8285"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/errata/rhsa-2021:2705"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2021-31525"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-8286"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-8927"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2021-3326"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2021-31525"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/documentation/en-us/openshift_container_platform/4.7/html/serverless/index"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2021-27918"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/documentation/en-us/openshift_container_platform/4.6/html/serverless/index"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2021-33196"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2021-33196"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-25039"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-14347"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-14346"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-25712"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-12364"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2021-3520"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-25037"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2019-25037"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2021-3537"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-12363"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2021-33909"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2021-3518"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2021-32399"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-28935"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2021-3516"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2019-25034"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2019-25035"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-14363"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2019-25038"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-14345"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-14360"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-25040"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2021-3517"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2021-3560"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-25042"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2021-20201"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2019-25042"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-12362"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-25038"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2021-3541"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2019-25032"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2019-25041"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/errata/rhsa-2021:3119"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2021-25217"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2019-25036"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-25032"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2021-20271"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2021-25215"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-25036"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-14344"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-25035"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-14345"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-14344"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-14362"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-14361"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-12362"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-12363"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2021-3114"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2021-28211"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2019-25039"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-14346"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2019-25040"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2020-12364"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-25041"
      },
      {
        "trust": 0.1,
        "url": "https://access.redhat.com/security/cve/cve-2021-33910"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-25034"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-10014"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-13524"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-14155"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-10016"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-10011"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-10015"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-10017"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-27894"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-27896"
      },
      {
        "trust": 0.1,
        "url": "https://support.apple.com/ht211931."
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-14899"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-10003"
      },
      {
        "trust": 0.1,
        "url": "https://www.knownsec.com/)"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-10009"
      },
      {
        "trust": 0.1,
        "url": "https://www.apple.com/support/security/pgp/"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-10004"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-10008"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-20838"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-10002"
      },
      {
        "trust": 0.1,
        "url": "https://www.paloaltonetworks.com/)"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-10010"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-10012"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-10663"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-10006"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-10007"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-11655"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-11656"
      },
      {
        "trust": 0.1,
        "url": "https://creativecommons.org/licenses/by-sa/2.5"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-13871"
      },
      {
        "trust": 0.1,
        "url": "https://security.gentoo.org/"
      },
      {
        "trust": 0.1,
        "url": "https://bugs.gentoo.org."
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2019-20218"
      },
      {
        "trust": 0.1,
        "url": "https://nvd.nist.gov/vuln/detail/cve-2020-13632"
      }
    ],
    "sources": [
      {
        "db": "VULHUB",
        "id": "VHN-166212"
      },
      {
        "db": "VULMON",
        "id": "CVE-2020-13434"
      },
      {
        "db": "PACKETSTORM",
        "id": "162628"
      },
      {
        "db": "PACKETSTORM",
        "id": "163209"
      },
      {
        "db": "PACKETSTORM",
        "id": "163496"
      },
      {
        "db": "PACKETSTORM",
        "id": "163789"
      },
      {
        "db": "PACKETSTORM",
        "id": "160545"
      },
      {
        "db": "PACKETSTORM",
        "id": "158592"
      },
      {
        "db": "CNNVD",
        "id": "CNNVD-202005-1159"
      },
      {
        "db": "NVD",
        "id": "CVE-2020-13434"
      }
    ]
  },
  "sources": {
    "@context": {
      "@vocab": "https://www.variotdbs.pl/ref/sources#",
      "data": {
        "@container": "@list"
      }
    },
    "data": [
      {
        "db": "VULHUB",
        "id": "VHN-166212"
      },
      {
        "db": "VULMON",
        "id": "CVE-2020-13434"
      },
      {
        "db": "PACKETSTORM",
        "id": "162628"
      },
      {
        "db": "PACKETSTORM",
        "id": "163209"
      },
      {
        "db": "PACKETSTORM",
        "id": "163496"
      },
      {
        "db": "PACKETSTORM",
        "id": "163789"
      },
      {
        "db": "PACKETSTORM",
        "id": "160545"
      },
      {
        "db": "PACKETSTORM",
        "id": "158592"
      },
      {
        "db": "CNNVD",
        "id": "CNNVD-202005-1159"
      },
      {
        "db": "NVD",
        "id": "CVE-2020-13434"
      }
    ]
  },
  "sources_release_date": {
    "@context": {
      "@vocab": "https://www.variotdbs.pl/ref/sources_release_date#",
      "data": {
        "@container": "@list"
      }
    },
    "data": [
      {
        "date": "2020-05-24T00:00:00",
        "db": "VULHUB",
        "id": "VHN-166212"
      },
      {
        "date": "2020-05-24T00:00:00",
        "db": "VULMON",
        "id": "CVE-2020-13434"
      },
      {
        "date": "2021-05-19T13:56:42",
        "db": "PACKETSTORM",
        "id": "162628"
      },
      {
        "date": "2021-06-17T18:34:10",
        "db": "PACKETSTORM",
        "id": "163209"
      },
      {
        "date": "2021-07-14T15:02:07",
        "db": "PACKETSTORM",
        "id": "163496"
      },
      {
        "date": "2021-08-11T16:15:17",
        "db": "PACKETSTORM",
        "id": "163789"
      },
      {
        "date": "2020-12-16T18:05:29",
        "db": "PACKETSTORM",
        "id": "160545"
      },
      {
        "date": "2020-07-27T18:32:44",
        "db": "PACKETSTORM",
        "id": "158592"
      },
      {
        "date": "2020-05-24T00:00:00",
        "db": "CNNVD",
        "id": "CNNVD-202005-1159"
      },
      {
        "date": "2020-05-24T22:15:10.397000",
        "db": "NVD",
        "id": "CVE-2020-13434"
      }
    ]
  },
  "sources_update_date": {
    "@context": {
      "@vocab": "https://www.variotdbs.pl/ref/sources_update_date#",
      "data": {
        "@container": "@list"
      }
    },
    "data": [
      {
        "date": "2023-01-09T00:00:00",
        "db": "VULHUB",
        "id": "VHN-166212"
      },
      {
        "date": "2023-11-07T00:00:00",
        "db": "VULMON",
        "id": "CVE-2020-13434"
      },
      {
        "date": "2023-06-30T00:00:00",
        "db": "CNNVD",
        "id": "CNNVD-202005-1159"
      },
      {
        "date": "2023-11-07T03:16:40.363000",
        "db": "NVD",
        "id": "CVE-2020-13434"
      }
    ]
  },
  "threat_type": {
    "@context": {
      "@vocab": "https://www.variotdbs.pl/ref/threat_type#",
      "sources": {
        "@container": "@list",
        "@context": {
          "@vocab": "https://www.variotdbs.pl/ref/sources#"
        }
      }
    },
    "data": "local",
    "sources": [
      {
        "db": "CNNVD",
        "id": "CNNVD-202005-1159"
      }
    ],
    "trust": 0.6
  },
  "title": {
    "@context": {
      "@vocab": "https://www.variotdbs.pl/ref/title#",
      "sources": {
        "@container": "@list",
        "@context": {
          "@vocab": "https://www.variotdbs.pl/ref/sources#"
        }
      }
    },
    "data": "Sqlite Input validation error vulnerability",
    "sources": [
      {
        "db": "CNNVD",
        "id": "CNNVD-202005-1159"
      }
    ],
    "trust": 0.6
  },
  "type": {
    "@context": {
      "@vocab": "https://www.variotdbs.pl/ref/type#",
      "sources": {
        "@container": "@list",
        "@context": {
          "@vocab": "https://www.variotdbs.pl/ref/sources#"
        }
      }
    },
    "data": "input validation error",
    "sources": [
      {
        "db": "CNNVD",
        "id": "CNNVD-202005-1159"
      }
    ],
    "trust": 0.6
  }
}